Summary: Ref T5501. This expands cache information a little more.
Test Plan: {F362975}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5501
Differential Revision: https://secure.phabricator.com/D12316
Summary:
Ref T5501. This code was headed down a bad road; dump an indirection layer between rendering and data gatehring.
In particular, this will make it much easier to lift these issues into setup warnings eventually.
Test Plan: Viewed cache status page.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5501
Differential Revision: https://secure.phabricator.com/D12315
Summary:
Ref T5501. This is just getting version detection and availability right, probably.
Eventually, this will get lifted up a bit and "$remedy" will turn into setup issues (or maybe one setup issue saying "your cache setup is messed up, click here to understand why").
Test Plan:
{F362935}
I intend to shove these up to production one-by-one since production is APC and local is Opcache + APCu.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5501
Differential Revision: https://secure.phabricator.com/D12314
Summary: Fixes T7764. These settings have low utility, are no longer used by default, have become less useful on modern Windows which has a better selection of available fonts, and will eventually be subsumed (at least, for the most part) by T4103.
Test Plan:
- Grepped for strings.
- Viewed settings.
- Changed font to "24px impact".
- Viewed diffs with default and custom font.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: chad, epriestley
Maniphest Tasks: T7764
Differential Revision: https://secure.phabricator.com/D12301
Summary: These arrays looks a little odd, most likely due to the autofix applied by `ArcanistXHPASTLinter::LINT_ARRAY_SEPARATOR`. See D12296 in which I attempt to improve the autocorrection from this linter rule.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12281
Summary:
Ref T7199. In the vein of D12231, these options were a bad idea.
- They once served a very narrow, Facebook-specific need (see T1992), except even Facebook only used the Differential setting AFAIK.
- Outside of that special case, they are unused and essentially unusable (generally speaking, they do not meaningfully implement anything modular or replaceable).
- I have no knowledge of any install ever changing these settings, and can imagine no reason why they would.
Moving forward:
- If they really need to, they can fork locally and chagne one line.
- I expect "!actions" to make mail at least somewhat more modular soon, anyway.
- Any derived handlers would break after T7199 and need to be rewritten anyway, so this is just taking advantage of a BC break to do cleanup.
Test Plan:
- Grepped for removed configuration.
- Sent some mail from applications, verified the reply handlers set proper reply addresses.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12233
Summary:
Ref T7199. These were a bad idea which got copy-pasted a bunch.
- There is zero reason to ever set these to different things.
- Unsurprisingly, I don't know of any install which has them set to different things.
Unless I've completely forgotten about it, this option was not motivated by some obscure business need, it was just a bad decision which didn't catch anyone's attention at the time.
We partially remedied the mistake at some point by introducing `metamta.reply-handler-domain`, which works as a default for all applications, but never cleaned this mess up.
Test Plan: Sent some mail from applications, verified it picked up appropraite reply handler domains.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12231
Summary:
Ref T7199. Although this is useful for discovery, it's un-useful enough that we already have an option to disable it, and most applications do not provide any meaningful instructions.
Throwing it away makes it easier to move forward and lets us get rid of a config option.
This is becoming a more advanced/power-user feature anyway, and the new syntax will be significantly more complex and hard to explain with a one-liner. I'm currently thinking that I'll maybe make the "help" menu a dropdown and give it some options like:
+---+
| O |
+---+---------------------+
| Maniphest Documentation |
| Maniphest Email Actions |
+-------------------------+
Then you click the "Email Actions" thing and get a runtime-derived list of available options. Not sure if I'll actually build that, but I think we can fairly throw the in-mail instructions away even if we don't go in that specific direction.
Test Plan: Grepped for `replyHandlerInstructions`, got no hits.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12229
Summary:
Ref T6755. This is a partial fix, but:
- Allow netblocks to be blacklisted instead of making the feature all-or-nothing.
- Default to disallow requests to all reserved private/local/special IP blocks. This should generally be a "safe" setting.
- Explain the risks better.
- Improve the errors rasied by Macro when failing.
- Removed `security.allow-outbound-http`, as it is superseded by this setting and is somewhat misleading.
- We still make outbound HTTP requests to OAuth.
- We still make outbound HTTP requests for repositories.
From a technical perspective:
- Separate URIs that are safe to link to or redirect to (basically, not "javascript://") from URIs that are safe to fetch (nothing in a private block).
- Add the default blacklist.
- Be more careful with response data in Macro fetching, and don't let the user see it if it isn't ultimately valid.
Additionally:
- I want to do this check before pulling repositories, but that's enough of a mess that it should go in a separate diff.
- The future implementation of T4190 needs to perform the fetch check.
Test Plan:
- Fetched a valid macro.
- Fetched a non-image, verified it didn't result in a viewable file.
- Fetched a private-ip-space image, got an error.
- Fetched a 404, got a useful-enough error without additional revealing response content (which is usually HTML anyway and not useful).
- Fetched a bad protocol, got an error.
- Linked to a local resource, a phriction page, a valid remote site, all worked.
- Linked to private IP space, which worked fine (we want to let you link and redierect to other private services, just not fetch them).
- Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6755
Differential Revision: https://secure.phabricator.com/D12136
Summary:
Fixes T7621. The engine selection code started out making sense, but didn't make as much sense by the time I was done with it.
Specifically, from the vanilla file upload, we may incorrectly try to write directly to the chunk storage engine. This is incorrect, and produces a confusing/bad error.
Make chunk storage engines explicit and don't try to do single-file one-shot writes to them.
Test Plan:
- Tried to upload a large file with vanilla uploader, got better error message.
- Uploaded small and large files with drag and drop.
- Viewed {nav Files > Help/Options}.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7621
Differential Revision: https://secure.phabricator.com/D12110
Summary:
Ref T7522. This is mostly useful in the cluster, but could be useful for external installs too.
If you want to import an instance into a test/dry-run state (in the cluster, to test an import; in the general case, to do something like test new hardware or configuration), you currently risk spamming users with a lot of duplicate notifications. In particular, if Phabricator tracks remotes, both instances will continue importing commits and sending email about them. Both instances will try to publish to mirrors, too, which could be bad news, and both instances will try to update linked services.
Instead, provide a flag to let an instance run in "silent mode", which disables all outbound messaging and data.
We need to remember to support this flag on any new outbound channels, but we add about one of those per year so I think that's reasonable.
Test Plan:
- Flipped config.
- Saw it void email, feed and mirroring.
- Didn't test SMS since it's not really in use yet and not convenient to test.
- (Can you think of any publishing I missed?)
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7522
Differential Revision: https://secure.phabricator.com/D12109
Summary:
Ref T7149. We can simplify configuration somewhat by removing the upload limit setting, now that we support arbitrarily large files.
- Merge configuration documentation.
- Tell users to set things to at least 32MB. This is 8MB maximum one-shot file + 4x headroom. Chunk sizes are 4MB.
Test Plan:
- Faked all the setup warnings.
- Read documentation.
- Uploaded some files.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7149
Differential Revision: https://secure.phabricator.com/D12083
Summary:
Right now, if a daemon dies it can leave the setup warning around for like 10 minutes or something until we reap it.
Tighten the warning so we only care about actively running daemons.
Test Plan: Checked setup issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12088
Summary:
Fixes T5843. File storage engines use a very old "selector" mechanism which makes them difficult to extend.
This mechanism predates widespread use of `PhutilSymbolLoader` to discover available implementations at runtime. Runtime discovery has generally proven more flexible and easier to use than explicit selection (although it sometimes needs more UI to support it in cases where order or enabled/disabled flags can not be directly determined).
Use a modern runtime discovery mechanism instead of an explicit selector. This might break any installs which subclassed the `Selector`, but I believe almost no such installs exist, and they'll receive a meaningful exception upon upgrading (any custom engines will no longer implement all of the required methods).
Looking forward, this modernizes infrastructure to prepare for new "virtual" chunked-storage engines, with the eventual goal of supporting very large file uploads and data import into the Phacility cluster.
This uses D12051 to add UI to make it easier to understand the state of storage engines.
Test Plan:
Used new UI panel to assess storage engines:
{F336270}
- Uploaded a small file, saw it go to MySQL engine.
- Uploaded a larger file, saw it go to S3 engine.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5843
Differential Revision: https://secure.phabricator.com/D12053
Summary: Renames the method in PHUIObjectBoxView to match the new PHUIInfoView class.
Test Plan: grepped codebase. Went to Calendar and tried a new status.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12005
Summary: Somewhat easier to parse and present information, with ICONS.
Test Plan:
Rebuilt current view with new layout. Tested toggling on and off some of the entries.
{F327816}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11938
Summary: Fixes some UIExample UI issues, adds a new full-width setting for DocumentView
Test Plan:
Test UIExamples at desktop and mobile breakpoints
{F327446}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7431
Differential Revision: https://secure.phabricator.com/D11933
Summary:
Fixes T7422. We'll currently choose a "binary" charset with a "utf8_general_ci" collation on "sort" columns on older MySQL, which seems to be causing problems.
Choose "utf8" in this case instead.
(I attempted to simplify the logic, too, but that's the only actual change.)
Test Plan: Went back and forth with `--disable-utf8mb4` on `storage adjust`, but this is version dependent so I'm not 100% sure it's the right fix.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7422
Differential Revision: https://secure.phabricator.com/D11928
Summary: Fixes T7308. Multiple users have encountered confusion around how they should specify a set or list in JSON; provide examples.
Test Plan:
```
epriestley@orbital ~/dev/phabricator $ ./bin/config set files.image-mime-types true
Usage Exception: Config key 'files.image-mime-types' is of type 'set'. Specify it in JSON. For example:
./bin/config set '{"value1": true, "value2": true}'
epriestley@orbital ~/dev/phabricator $ ./bin/config set cluster.addresses true
Usage Exception: Config key 'cluster.addresses' is of type 'list<string>'. Specify it in JSON. For example:
./bin/config set '["a", "b", "c"]'
epriestley@orbital ~/dev/phabricator $
```
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T7308
Differential Revision: https://secure.phabricator.com/D11925
Summary: Since this element isn't strictly about errors, re-label as info view instead.
Test Plan: Grepped for all callsites, tested UIExamples and a few other random pages.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11867
Summary: In D11722, a `getGroup()` method was added to all subclasses of `PhabricatorApplicationConfigOptions`, but no abstract method was added to the base class. This will fail if a custom `*ConfigOptions` class does not provide a `getGroup()` method, in which case `$group->getGroup()` (in `PhabricatorConfigListController`) will fatal.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11756
Summary: This diff moves the default monospace font from a Global Default config value to CSS. What this will allow is some flexibility in changing this font in other areas (like Diviner and DocumentView) without changing the defaults globally. However if the admin sets a config value or a user sets a config value, that value will trump all settings in the CSS files with an !important declaration in the page head.
Test Plan:
Currently tested:
- Setting no value
- Setting an admin value
- Setting a user value
Verify remarkup blocks in Differential, Diviner, Conpherence, and Diffusion look as expected.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11597
Summary: Moves the setting from Core to UI, also adds a link to the task for further instructions.
Test Plan: Load up config in sandbox, see new instructions.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4214
Differential Revision: https://secure.phabricator.com/D11900
Summary: See IRC. This check is somewhat misleading right now because it could arise from a mangled/broken Host header rather than a bad `phabricator.base-uri` configuration.
Test Plan: Faked this to trip, read all the text.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11894
Summary:
Fixes T7287. This trades off 4-byte character support for case insensitivity in these columns, which is a much better trade on the balance.
Also adds more warnings about old MySQL. Note that we already issue a warning when you run "storage adjust" (which I've made stronger) and already "strongly recommend" MySQL 5.5 or newer in the install documentation.
Test Plan:
- Ran `storage adjust --disable-utf8mb4` to go to old definitions, then ran `storage adjust` to get back to the new ones. Everything seemed OK in both cases.
- Verified that utf8mb4 data can be migrated out of these colums with `--unsafe` (which will truncate).
- Verified that manual explains this.
- Faked my way into the setup warning.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7287
Differential Revision: https://secure.phabricator.com/D11893
Summary: Fixes T7165. Let users specify a file phid in config, and then use that file via an inline style tag. Also, cache the URI so that we don't have to query the file on every page load.
Test Plan: {F319050}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7165
Differential Revision: https://secure.phabricator.com/D11886
Summary: Ref T7352. This is pretty straightforward. I renamed `phd.start-taskmasters` to `phd.taskmasters` for clarity.
Test Plan:
- Ran `phd start`, `phd start --autoscale-reserve 0.25`, `phd restart --autoscale-reserve 0.25`, etc.
- Examined PID file to see options were passed.
- I'm defaulting this off (0 reserve) and making it a flag rather than an option because it's a very advanced feature which is probably not useful outside of instancing.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11871
Summary:
Ref T6840. This feels a little dirty; open to alternate suggestions.
We currently have a race condition where multiple daemons may load a commit and then save it at the same time, when processing "reverts X" text. Prior to this feature, two daemons would never load a commit at the same time.
The "reverts X" load/save has no effect (doesn't change any object properties), but it will set the state back to the loaded state on save(). This overwrites any flag updates made to the commit in the meantime, and can produce the race in T6840.
In other cases (triggers, harbormaster, repositories) we deal with this kind of problem with "append-only-updates + single-consumer", or a bunch of locking. There isn't really a good place to add a single consumer for commits, since a lot of daemons need to access them. We could move the flags column to a separate table, but this feels pretty complicated. And locking is messy, also mostly because we have so many consumers.
Just exempting this column (which has unusual behavior) from `save()` feels OK-ish? I don't know if we'll have other use cases for this, and I like it even less if we never do, but this patch is pretty small and feels fairly understandable (that said, I also don't like that it can make some properties just silently not update if you aren't on the lookout).
So, this is //a// fix, and feels simplest/least-bad for the moment to me, I thiiink.
Test Plan: Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6840
Differential Revision: https://secure.phabricator.com/D11822
Summary:
Ref T4340. The attack this prevents is:
- An adversary penetrates your network. They acquire one of two capabilities:
- Your server is either configured to accept both HTTP and HTTPS, and they acquire the capability to observe HTTP traffic.
- Or your server is configured to accept only HTTPS, and they acquire the capability to control DNS or routing. In this case, they start a proxy server to expose your secure service over HTTP.
- They send you a link to `http://secure.service.com` (note HTTP, not HTTPS!)
- You click it since everything looks fine and the domain is correct, not noticing that the "s" is missing.
- They read your traffic.
This is similar to attacks where `https://good.service.com` is proxied to `https://good.sorvace.com` (i.e., a similar looking domain), but can be more dangerous -- for example, the browser will send (non-SSL-only) cookies and the attacker can write cookies.
This header instructs browsers that they can never access the site over HTTP and must always use HTTPS, defusing this class of attack.
Test Plan:
- Configured HTTPS locally.
- Accessed site over HTTP (got application redirect) and HTTPS.
- Enabled HSTS.
- Accessed site over HTTPS (to set HSTS).
- Tore down HTTPS part of the server and tried to load the site over HTTP. Browser refused to load "http://" and automatically tried to load "https://". In another browser which had not received the "HSTS" header, loading over HTTP worked fine.
- Brought the HTTPS server back up, things worked fine.
- Turned off the HSTS config setting.
- Loaded a page (to set HSTS with expires 0, diabling it).
- Tore down the HTTPS part of the server again.
- Tried to load HTTP.
- Now it worked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4340
Differential Revision: https://secure.phabricator.com/D11820
Summary:
Ref T7185. These settings shouldn't be unlocked anywhere. Specifically:
- `reply-handler`: These are on the way out.
- `reply-handler-domain`: Also hopefully on the way out; locked because a compromised administrator account can redirect replies.
- `phabricator.cookie-prefix`: Not dangerous per se, but an admin could have a hard time fixing this if they changed it by accident since their session would become invalid immediately.
Test Plan: Browsed Config.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7185
Differential Revision: https://secure.phabricator.com/D11764
Summary:
Ref T7185. We currently have "locked", "masked", and "hidden" config.
However, "masked" does not really do anything. It was intended to mask values in DarkConsole, but Config got built out instead and "hidden" is strictly better in modern usage and protects against compromised administrator accounts. "hidden" implies "locked", so it's now strictly more powerful than just locked.
Remove "masked" and upgrade all "masked" config to "hidden". In particular, this hides some API keys and secret keys much more aggressively in Config, which is desirable.
Test Plan: Browsed things like S3 API keys in config and could no longer see them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7185
Differential Revision: https://secure.phabricator.com/D11763
Summary: Pretty sure this was me derping, not trying to make a joke.
Test Plan: New text makes sense.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11762
Summary: Fixes T7088. Mainly this updates the documentation but I also snuck in tweaking how the domain reply handler is built. This does two main things -- makes the behavior consistent as some applications who didn't override this behavior would send out emails with reply tos AND makes it easier for us to deprecate the custom domain thing on a per application basis, which is just silly. On that note, the main documentation doesn't get into how this can be overridden, though I left in that mini blurb on the config setting itself. We could deprecate this harder and LOCK things if you want as well.
Test Plan: read docs, looked good. reasoned through re-factor
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7088
Differential Revision: https://secure.phabricator.com/D11725
Summary:
Ref T7152. Ref T1139. This updates Phabricator so third-party libraries can translate their own stuff. Also:
- Hide "All Caps" when not in development mode, since some users have found this a little confusing.
- With other changes, adds a "Raw Strings" mode (development mode only).
- Add an example silly translation to make sure the serious business flag works.
- Add a basic British English translation.
- Simplify handling of translation overrides.
Test Plan:
- Flipped serious business / development on and off and saw silly/development translations drop off.
- Switched to "All Caps" and saw all caps.
- Switched to Very English, Wow!
- Switched to British english and saw "colour".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152, T1139
Differential Revision: https://secure.phabricator.com/D11747
Summary:
Ref T7184. I managed to write a phantom setup issue which fails normally and succeeds when looked at carefully, so clicking "you have open issues..." always cleared them. This made it very difficult to figure out what the problem was.
Show issue keys in the "title" attribute to make this sort of thing easier to deal with.
Test Plan: Moused over "You have issues..." text, saw issue key, quickly fixed issue with new information.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7184
Differential Revision: https://secure.phabricator.com/D11743
Summary: Groups setup issues into Important, PHP, MySQL, and Base for easier parsing on initial installations.
Test Plan:
Test my internal server and various issues.
{F289699}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7207
Differential Revision: https://secure.phabricator.com/D11726
Summary: Adds core and apps grouping to configuration options, makes it somewhat easier to browse config options.
Test Plan: Set each option, review list. Breakdown is nearly 50/50 apps/core.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11722
Summary:
I'm hitting this in the cluster and couldn't figure it out after staring at it for a couple minutes. Produce a better error.
This dumps a hash of each configuration key value which is set to a non-default value into the daemon log. This is much more compact than the full config, and doesn't spread secrets around, so it seems like a good balance between providing information and going crazy with it.
Test Plan: {F284139}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11699
Summary:
Fixes T2380. Fixes T2382. Users should really configure this, but when we had a warning before a lot of users had trouble with it.
- Tout performance benefits.
- Document easy setup via CDN.
- We have an "Ignore" button now for users who really don't care.
Test Plan:
- Set up `admin.phacility.com` through AWS CloudFront (need a few changes to handle instances to put it on the cluster in general).
- Set up `secure.phabricator.com` through CloudFlare (almost; waiting for DNS).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T2382, T2380
Differential Revision: https://secure.phabricator.com/D11649
Summary: Minor, adds border, reduces greys, etc.
Test Plan:
View a number of config issues, see new colors.
{F282035}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11650
Summary: This sets an icon for each config, makes it easier to scan.
Test Plan:
Reload Config page, see all new icons
{F281089}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11619
Summary: Clean up the error view styling.
Test Plan:
Tested as many as I could find, built additional tests in UIExamples
{F280452}
{F280453}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11605
Summary:
Hit this locally, with an error like:
> Version <empty string> is older than 1.9, the minimum supported version.
(Where `<empty string>` was just the empty string, not literally the text `<empty string>`.)
Be more careful about parsing versions, and parse the newer string.
Test Plan: Got "unknown version" with intentionally-broken test data, then clean readout.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11558
Summary: Fixes T7034. Like HTTP, proxy requests to the correct host if a repository has an Almanac service host.
Test Plan: Ran VCS requests through the proxy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7034
Differential Revision: https://secure.phabricator.com/D11543
Summary: Add a setBorder call to CrumbsView to be more deliberate when a border is drawn. Could not find any CSS hacks to set it conditionally CSS.
Test Plan: Browsed every application that called crumbs and make a design decision. Also fixed a few bad layouts.
Reviewers: btrahan, epriestley
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11533
Summary:
Fixes T7019. In a cluster environment, pushes currently fail because the commit hook can't identify the instance.
For web processes, the hostname identifies the instance -- but we don't have a hostname in the hook.
For CLI processes, the environment identifies the instance -- but we don't have an environment in the hook under SVN.
Promote the instance identifier into the upstream and pack/unpack it explicitly for hooks. This is probably not useful for anyone but us, but the amount of special-purpose code we're introducing is very small.
I poked at trying to do this in a more general way, but:
- We MUST know this BEFORE we run code, so the normal subclassing stuff is useless.
- I couldn't come up with any other parameter which might ever be useful to pass in.
Test Plan: Used `git push` to push code through proxied HTTP, got a clean push.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7019
Differential Revision: https://secure.phabricator.com/D11495
Summary: Adds in the sidenav
Test Plan: Click on sidenav, see it persist
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11526
Summary: Select a similar or better FontAwesome icon to represent each application
Test Plan: Visual inspection
Reviewers: epriestley, btrahan
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11489
Summary: Ref T6822. This method needs to be `public` because it is called from `PhabricatorApplicationSearchController::buildApplicationMenu()`.
Test Plan: I wouldn't expect //increasing// method visibility to break anything.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11416
Summary: Fixes T6959.
Test Plan: When I was ready to test the feature, the "Daemon & Web config" error already showed up, from having added phd.variant-config. I went meta and changed the value of phd.variant-config to have phd.variant-config. The config error disappeared. I then changed the conpherence setting about conpherence email prefix and the error showed up again. Removing the conpherence config setting made the error disappear once more.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6959
Differential Revision: https://secure.phabricator.com/D11399
Summary: Fixes T6923. Turns out we can't use the editor since we don't have a user with a phid (just some omnipotent guy).
Test Plan: ./bin/config set --database syntax.filemap '{}'; ./bin/config delete --database syntax.filemap
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6923
Differential Revision: https://secure.phabricator.com/D11301
Summary:
Fixes T6559. No more flash, use Websockets. This is less aggressive than the earlier version, and retains more server logic.
- Support "wss".
- Make the client work.
- Remove "notification.user" entirely.
- Seems ok?
Test Plan:
In Safari, Firefox and Chrome, saw the browsers connect. Made a bunch of comments/updates and saw notifications.
Notable holes in the test plan:
- Haven't tested "wss" yet. I'll do this on secure.
- Notifications are //too fast// now, locally. I get them after I hit submit but before the page reloads.
- There are probably some other rough edges, this is a fairly big patch.
Reviewers: joshuaspence, btrahan
Reviewed By: joshuaspence, btrahan
Subscribers: fabe, btrahan, epriestley
Maniphest Tasks: T6713, T6559
Differential Revision: https://secure.phabricator.com/D11143
Summary: Ref T6822.
Test Plan: Visual inspection. These methods are only called from within `PhabricatorController` subclasses.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11241
Summary: Ref T6822.
Test Plan: Visual inspection. These methods are only called from within the `PhabricatorConfigStorageSchema` class.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11247
Summary:
Ref T2783. Ref T6706.
- Add `cluster.addresses`. This is a whitelist of CIDR blocks which define cluster hosts.
- When we recieve a request that has a cluster-based authentication token, require the cluster to be configured and require the remote address to be a cluster member before we accept it.
- This provides a general layer of security for these mechanisms.
- In particular, it means they do not work by default on unconfigured hosts.
- When cluster addresses are configured, and we receive a request //to// an address not on the list, reject it.
- This provides a general layer of security for getting the Ops side of cluster configuration correct.
- If cluster nodes have public IPs and are listening on them, we'll reject requests.
- Basically, this means that any requests which bypass the LB get rejected.
Test Plan:
- With addresses not configured, tried to make requests; rejected for using a cluster auth mechanism.
- With addresses configred wrong, tried to make requests; rejected for sending from (or to) an address outside of the cluster.
- With addresses configured correctly, made valid requests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6706, T2783
Differential Revision: https://secure.phabricator.com/D11159
Summary:
Fixes T6692. Addresses two main issues:
- The write guard would sometimes not get disposed of on exception pathways, generating an unnecessary secondary error which was just a symptom of the original root error.
- This was generally confusing and reduced the quality of reports we received because users would report the symptomatic error sometimes instead of the real error.
- Instead, reflow the handling so that we always dispose of the write guard if we create one.
- If we missed the Controller-level error page generation (normally, a nice page with full CSS, etc), we'd jump straight to Startup-level error page generation (very basic plain text).
- A large class of errors occur too early or too late to be handled by Controller-level pages, but many of these errors are not fundamental, and the plain text page is excessively severe.
- Provide a mid-level simple HTML error page for errors which can't get full CSS, but also aren't so fundamental that we have no recourse but plain text.
Test Plan:
Mid-level errors now produce an intentional-looking error page:
{F259885}
Verified that setup errors still render properly.
@chad, feel free to tweak the exception page -- I just did a rough pass on it. Like the setup error stuff, it doesn't have Celerity, so we can't use `{$colors}` and no other CSS will be loaded.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, chad
Maniphest Tasks: T6692
Differential Revision: https://secure.phabricator.com/D11126
Summary:
Removes an unused PhabricatorFeedStory Parameter from all getTitleForFeed() and getApplicationTransactionTitleForFeed() functions.
Ref D11088 Ref T6545
Test Plan: ran all unit tests and viewed some dashboard feeds
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6545
Differential Revision: https://secure.phabricator.com/D11146
Summary:
Shows a timeline of all modified settings Fixes T6545
Will show all settings (no pagination, should be not so difficult to add if needed but most installs won't have hundreds of settings changes)
I'm not happy by how the PhabricatorConfigTransaction object is instructed to render the config keys but i don't see any other reasonable way.
We could always show the keys though.
Test Plan: Changed settings and called the history page
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6545
Differential Revision: https://secure.phabricator.com/D11088
Summary:
Ref T2783. When repository services are defined, skip the check for local repository storage.
In particular, in the Phacility cluster, this path won't exist on web nodes, but nothing will ever try to access it.
Test Plan: Verified new branch gets hit with cluster services defined.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11100
Summary:
Fixes T5196
If no phd.user is configured the behaviour is unchanged besides printing a warning when run as root (Usually i would add an exit(1) here but that would break existing installs who do that).
If phd.user is set and the current user is root it will run the daemon as: su USER -c "command" (I'm not sure if this works for every platform needed)
Otherwise it will refuse to start if configured and current user mismatch.
Test Plan: Stopped & Started phd daemon with various users and different phd.user settings including root
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: vinzent, epriestley
Maniphest Tasks: T5196
Differential Revision: https://secure.phabricator.com/D11036
Summary:
When the index does not exist and auto_create_index isn't
enabled, running ./bin/index results in a failure. That's
T5990
Instead create an index properly. This also allows us to do
nice things like do a proper mapping and analysis like for
substring matching like outlined by @fabe in T6552.
Test Plan:
Deleted and created index multiple times to verify
proper index creation and usage.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, manybubbles, chasemp, fabe, epriestley
Differential Revision: https://secure.phabricator.com/D10955
Summary: Ref: T6747 add a setup warning if mysql is configured with the default boolean syntax
Test Plan: Run setup checks with default mysql config and then add the desired config option, restart and check again.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T6747
Differential Revision: https://secure.phabricator.com/D11030
Summary:
Two goals:
- If an attacker compromises an administrator account (without compromising the host itself), they can currently take advantage of vulnerabilities in prototype applications by enabling the applications, then exploiting the vulnerability. Locking this option requires CLI access to enable prototypes, so installs which do not have prototypes enabled have no exposure to security issues in prototype applications.
- Making this very slightly harder to enable is probably a good thing, given the state of the world and support.
Test Plan: Verified that web UI shows the value is locked and instructs the user to update via the CLI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10993
Summary: Fixes T6693.
Test Plan:
Made a bunch of comments on a diff with differential, being sure to leave inlines here and there. This reproduced the issue in T6693. With this patch this issue no longer reproduces!
Successfully "showed older changes" in Maniphest too.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6693
Differential Revision: https://secure.phabricator.com/D10931
Summary: Ref T4712. These are a bit time consuming to test so might as well send off a batch now and again.
Test Plan: foreach impacted controller, made sure the timeline rendered as it did before. for project column and config, noted the "should terminate" UI was also rendered unlike before.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4712
Differential Revision: https://secure.phabricator.com/D10923
Summary: Ref T1217, Add link to email preferences to email template
Test Plan: Add comment to object like Maniphest task, check that email has a footer with a link to email preferences.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T1217
Differential Revision: https://secure.phabricator.com/D10883
Summary: Fixes T6243.
Test Plan: simulated having this on by adding 'ONLY_FULL_GROUP_BY' to the $modes array. verified the error message looked nice {F233954}.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6243
Differential Revision: https://secure.phabricator.com/D10856
Summary: Fixes T3046. Git has no minimum or bad versions; svn has no minimum and the bad version of 1.7.1, and mercurial has a minimum of 1.9 and bad versions 2.2 and 2.1. These error messages are specific about the problem but do not include the details as to what specifically is bad about a given version. I don't think that's really necessary - the details don't help solve the problem and its probably booooooring at best to the average user. The details about a bad version are included in the code however.
Test Plan: hardcoded a VCS array to let me test all the VCS stuff. added some phlog() calls to make sure the VCS version parsing stuff was working correctly relative to the version(s) on my system. played around with setting minimum versions and bad versions and saw good results depending on what I set.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T3046
Differential Revision: https://secure.phabricator.com/D10852
Summary: Fixes T6175. This particular option is only editable via the Applications application so let the user know that.
Test Plan: saw error message and clicked through to applications app. tried another locked option and saw old message
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6175
Differential Revision: https://secure.phabricator.com/D10841
Summary: i think way back in D10490 I didn't incorporate feedback correctly. make this code right as it fatals in this codepath as is. Fixes T6508.
Test Plan: @joshuaspence to the rescue (I remain unable to test this effectively with my baby-clean installation.)
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley, joshuaspence
Maniphest Tasks: T6508
Differential Revision: https://secure.phabricator.com/D10833
Summary:
Ref T1191. Currently if a developer forgot to specify a column type, `storage adjust` aborts explosively mid-stream. Instead:
- Make this a formal error with an unambiugous name/description instead of something you sort of infer by seeing "<unknown>".
- Make this error prevent generation of adjustment warnings, so we don't try to `ALTER TABLE t CHANGE COLUMN c <unknown>`, which is nonsense.
- When schemata errors exist, surface them prominiently in `storage adjust`.
Overall:
- Once `storage upgrade` runs `storage adjust` automatically (soon), this will make it relatively difficult to miss these errors.
- Letting these errors slip through no longer escalates into a more severe issue.
Test Plan:
Commented out the recent `mailKey` spec and ran `storage adjust`:
```
$ ./bin/storage adjust --force
Verifying database schemata...
Found no adjustments for schemata.
Target Error
phabricator2_phriction.phriction_document.mailKey Column Has No Specification
SCHEMATA ERRORS
The schemata have serious errors (detailed above) which the adjustment
workflow can not fix.
If you are not developing Phabricator itself, report this issue to the
upstream.
If you are developing Phabricator, these errors usually indicate that your
schema specifications do not agree with the schemata your code actually
builds.
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10771
Summary: Fixes T6436. We subclass the wrong controller and miss the admin-only check.
Test Plan: Ignored / unignored set up issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6436
Differential Revision: https://secure.phabricator.com/D10765
Summary:
Ref T1191. Notable stuff:
- Adds `--disable-utf8mb4` to `bin/storage` to make it easier to test what things will (approximately) do on old MySQL. This isn't 100% perfect but should catch all the major stuff. It basically makes us pretend the server is an old server.
- Require utf8mb4 to dump a quickstart.
- Fix some issues with quickstart generation, notably special casing the FULLTEXT handling.
- Add an `--unsafe` flag to `bin/storage adjust` to let it truncate data to fix schemata.
- Fix some old patches which don't work if the default table charset is utf8mb4.
Test Plan:
- Dumped a quickstart.
- Loaded the quickstart with utf8mb4.
- Loaded the quickstart with `--disable-utf8mb4` (verified that we get binary columns, etc).
- Adjusted schema with `--disable-utf8mb4` (got a long adjustment with binary columns, some truncation stuff with weird edge case test data).
- Adjusted schema with `--disable-utf8mb4 --unsafe` (got truncations and clean adjust).
- Adjusted schema back without `--disable-utf8mb4` (got a long adjustment with utf8mb4 columns, some invalid data on truncated utf8).
- Adjusted schema without `--disable-utf8mb4`, but with `--unsafe` (got truncations on the invalid data).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10757
Summary: Fixes T4018. Basically hits the bullet points in that task description except the "ideally" one.
Test Plan:
ran bin/config migrate and saw sensible output.
```
~> ./bin/config migrate
Migrating file-based config to more modern config...
Skipping config of source type PhabricatorConfigDatabaseSource...
Skipping config of source type PhabricatorConfigLocalSource...
Skipping config of source type PhabricatorConfigDefaultSource...
Done. Migrated 0 keys.
```
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T4018
Differential Revision: https://secure.phabricator.com/D10490
Summary: Fixes T6119. This is a little fuzzy, but generally bumping up `innodb_buffer_pool_size` to something bigger than the default (which is often anemic, at `8M`) is desriable, and it seems like it will fix the specific issue a user encountered in T6119.
Test Plan: {F211855}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6119
Differential Revision: https://secure.phabricator.com/D10630
Summary:
Ref T1191. Although I fixed some of the mutations earlier (in D10598), I missed the column mutations under old versions of MySQL. In particular, this isn't valid:
- `ALTER TABLE ... MODIFY columnName VARCHAR(64) COLLATE binary`
Issue the permitted version of this instead, which is:
- `ALTER TABLE ... MODIFY columnName VARBINARY(64)`
Also fixed an issue where a clean schema had the wrong nullability for a column in the draft table. Force it to the expected nullability.
The other trick here is around the one column with a FULLTEXT index on it, which needs a little massaging.
Test Plan:
- Forced my local install to return `false` for utf8mb4 support.
- Did a clean adjust into `binary` columns.
- Poked around, added emoji to things.
- Reverted the fake check and did a clean adjust into `utf8mb4` columns.
- Emoji survived.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: fabe, epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10627
Summary:
Ref T1191. Now that the whole database is covered, we don't need to do as much work to build expected schemata. Doing them database-by-database was helpful in converting, but is just reudndant work now.
Instead of requiring every application to build its Lisk objects, just build all Lisk objects.
I removed `harbormaster.lisk_counter` because it is unused.
It would be nice to autogenerate edge schemata, too, but that's a little trickier.
Test Plan: Database setup issues are all green.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10620
Summary: Fixes T6210. The current messaging may be confusing if `pygmentize` is available but broken.
Test Plan: Faked the binary names and hit the errors, which seemed helpful.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6210
Differential Revision: https://secure.phabricator.com/D10626
Summary:
Ref T1191. When changing the column type of an AUTO_INCREMENT column, we currently may lose the autoincrement attribute.
Instead, support it. This is a bit messy because AUTO_INCREMENT columns interact with PRIMARY KEY columns (tables may only have one AUTO_INCREMENT column, and it must be a primary key). We need to migrate in more phases to avoid this issue.
Introduce new `auto` and `auto64` types to represent autoincrement IDs.
Test Plan:
- Saw autoincrement show up correctly in web UI.
- Fixed an autoincrement issue on the XHProf storage table with `bin/storage adjust` safely.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10607
Summary:
Ref T1191. Currently, the `quickstart.sql` gets generated in a pretty manual fashion. This is a pain, and will become more of a pain in the world of utf8mb4.
Provide a workflow which does upgrade + adjust + dump + destroy, then massages the output to produce a workable `quickstart.sql`.
Test Plan: Inspected output; I'll test this more throughly before actually generating a new quickstart, but that's some ways away.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10603
Summary:
Ref T1191. For most text columns, we either don't care if "a" and "A" are the same, or we expect them to be different (for example: keys, domains, secrets, etc). Default text columns to the `_bin` collation so they are compared by strict character value. This is safer in cases where we aren't sure.
For some text columns, we allow the user to sort by the column in the UI (like Maniphest task titles) or we do care that "A" and "a" are the same (for example: project names). Introduce a new class of virtual data types, the "sort..." types, to cover these columns. These are like the "text..." types but use sorting collations which treat "A" and "a" the same.
Test Plan:
- Made an effort to identify all columns where the UI relies on database collation.
- Ran `bin/storage adjust` and cleared all warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: beng, epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10602
