Summary: Ref T1049. This hides the build target messages area if there are no messages for the target. Since most of the time a build target won't recieve any messages, this area is confusing because it's always empty.
Test Plan: Viewed a build, saw the empty build target message areas disappear.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D10092
Summary: We've received feedback that the "core - exception" is incredibly confusing, to the point where developers see this and write off the build failure as a Phabricator error that is unrelated to their changes.
Test Plan: Ran a build with a `exit 1` run step, didn't see the "core - exception" appear.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10090
Summary: This makes input artifacts imply the appropriate build step dependencies in the build plan. That is, if you use a host artifact in a build step, it will then implicitly depend on the 'Lease Host' step.
Test Plan: Viewed the build plan with the artifacts, saw the dependencies. Ran a build, saw everything execute in the correct order.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10089
Summary:
Depends on D9806. This implements the build simulator, which is used to calculate the order of build steps in the plan editor. This includes a migration script to convert existing plans from sequential based to dependency based, and then drops the sequence column.
Because build plans are now dependency based, the grippable and re-order behaviour has been removed.
Test Plan: Tested the migration, saw the dependencies appear correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9847
Summary: Instead of implementing the `getCapabilityKey` method in all subclasses of `PhabricatorPolicyCapability`, provide a `final` implementation in the base class which uses reflection. See D9837 and D9985 for similar implementations.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D10039
Summary: Ref T5655. Rename `PhabricatorPHIDType` subclasses for clarity (see discussion in D9839). I'm not too keen on some of the resulting class names, so feel free to suggest alternatives.
Test Plan: Ran unit tests.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin, hach-que
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9986
Summary: Provide an implementation for the `getName` method rather than automagically determining the application name.
Test Plan: Saw reasonable application names in the launcher.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10027
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary: Instead of implementing the `getTypeConstant` method in all subclasses of `PhabricatorPHIDType`, provide a `final` implementation in the base class which uses reflection. See D9837 for a similar implementation.
Test Plan: Ran `arc unit`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9985
Summary: I'm pretty sure that `@group` annotations are useless now... see D9855. Also fixed various other minor issues.
Test Plan: Eye-ball it.
Reviewers: #blessed_reviewers, epriestley, chad
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9859
Summary: Ref T1049. This provides a user-configurable name field on build steps, which allows users to uniquely identify their steps. The intention is that this field will be used in D9806 to better identify the dependencies (rather than showing an unhelpful PHID).
Test Plan: Set the name of some build steps, saw it appear in the correct places.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D9816
Summary: Ref T1049. This moves the declaration of build variables onto HarbormasterBuildableInterface, allowing new classes implementing HarbormasterBuildableInterface to declare their own variables.
Test Plan: Implemented it on another class, saw the build variables appear.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D9618
Summary: This implements showing the buildable status in Diffusion and unifies some of the logic used to calculate and render build and buildable statuses.
Test Plan: Looked at diffs and commits with statuses, they rendered fine. Looked at Diffusion and saw buildable status appear (with a manual buildable and manual buildables included in the query).
Reviewers: #blessed_reviewers, epriestley, chad
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9496
Summary: Ref T4986. Instead of requiring users to know the name of an application search engine class, let them select from a list.
Test Plan:
Created a new panel.
{F165468}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9500
Summary: Nothing inside Phabricator uses the return value of this method, but returning the actual build instance is far more useful (for kicking off builds in an application and storing the build PHID against another object).
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9494
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: This went smoother than expeced. Makes the rounded Card the default, also tweaked selected state a little.
Test Plan:
Test UIExamples, Maniphest, Home, Differential, Harbormaster, Audit. Everything seems normal
{F163971}
{F163973}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9408
Summary:
This does some backend cleanup of the tile stuff, and some general cleanup of other application things:
- Users who haven't customized preferences get a small, specific set of pinned applications: Differential, Maniphest, Diffusion, Audit, Phriction, Projects (and, for administrators, Auth, Config and People).
- Old tile size methods are replaced with `isPinnnedByDefault()`.
- Shortened some short descriptions.
- `shouldAppearInLaunchView()` replaced by less ambiguous `isLaunchable()`.
- Added a marker for third-party / extension applications.
Test Plan: Faked away my preferences and viewed the home page, saw a smaller set of default pins.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9358
Summary:
This probably needs some tweaks, but the idea is to make it easier to browse and access applications without necessarily needing them to be on the homepage.
Open to feedback.
Test Plan:
(This screenshot merges "Organization", "Communication" and "Core" into a single "Core" group. We can't actually do this yet because it wrecks the homepage.)
{F160052}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5176
Differential Revision: https://secure.phabricator.com/D9297
Summary:
Updates policy, headers, typeaheads to FA over policy icons
Need advice - can't seem to place where icons come from on Typeahead? Wrong icons and wrong colors.... it is late
Test Plan:
- grepped for SPRITE_STATUS
- grepped for sprite-status
- grepped for setStatus for headers
- grepped individual icons names
Browsed numerous places, checked new dropdowns, see pudgy people.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4739
Differential Revision: https://secure.phabricator.com/D9179
Summary: Changes to using FontAwesome
Test Plan:
Testing UIExamples and each of the pages (except releelph)
{F155942}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9157
Summary: Fixes T5062. See inlines.
Test Plan: Did not test whatsoever.
Reviewers: hach-que
Reviewed By: hach-que
Subscribers: epriestley
Maniphest Tasks: T5062
Differential Revision: https://secure.phabricator.com/D9132
Summary:
Create transaction, editor, etc, and move command generation over to editor.
Show in a timeline in the buildable page.
Also prevent Engine from creating an empty transaction when build starts (Fixes T4885).
Fixes T4886.
Test Plan: Restart builds and buildables, look at timeline.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4885, T4886
Differential Revision: https://secure.phabricator.com/D9110
Summary: Ref T5058. The use of "enum" is confusing; we mean "choose one of these specific string constants". Make this more clear.
Test Plan: Viewed each call from the web UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5058
Differential Revision: https://secure.phabricator.com/D9127
Summary: Did a more exhaustive grep on setIcon and found 99.9% of the icons.
Test Plan: I verified icon names on UIExamples, but unable to test some of the more complex flows visually. Mostly a read and replace.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9088
Summary: The removes the sprite sheet 'icons' and replaces it with FontAwesome fonts.
Test Plan:
- Grep for SPRITE_ICONS and replace
- Grep for sprite-icons and replace
- Grep for PhabricatorActionList and choose all new icons
- Grep for Crumbs and fix icons
- Test/Replace PHUIList Icon support
- Test/Replace ObjectList Icon support (foot, epoch, etc)
- Browse as many pages as I could get to
- Remove sprite-icons and move remarkup to own sheet
- Review this diff in Differential
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9052
Summary: Ref T4986. These are mostly mechanical now, I skipped a couple of slightly tricky ones. Still a bunch to go.
Test Plan:
For each engine:
- Viewed the application;
- created a panel to issue the query.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9017
Summary: Ref T3583. Use the same approach Harbormaster does to give panels cheap forms.
Test Plan:
{F149218}
{F149219}
{F149220}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3583
Differential Revision: https://secure.phabricator.com/D8919
Summary: Took a short pass here with the new UI, holler if something is TOO EXTREME.
Test Plan:
Tested with manual sleep builds.
{F148693}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8901
Summary: Throwing this up for testing, swapped out all icons in timeline for their font equivelants. Used better icons where I could as well. We should feel free to use more / be fun with the icons when possible since there is no penalty anymore.
Test Plan: I browsed many, not all, timelines in my sandbox and in IE8. Some of these were just swagged, but I'm expecting we'll do more SB testing before landing.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8827
Summary:
Fixes T4810. When a buildable completes, make an effort to update the corresponding object with a success or failure message. Commits don't support this yet, but revisions do.
{F144614}
Test Plan:
- Used `bin/harbormaster build` and `bin/harbormaster update` to run a pile of builds.
- Tried good/bad builds.
- Sent some normal mail to make sure the mail reentrancy change didn't break stuff.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4810
Differential Revision: https://secure.phabricator.com/D8803
Summary:
Ref T4809. Currently, buildables have a status field but nothing populates it. Populate it:
- When builds change state, update the Buildable state.
- Use the new Buildable state on the web UI.
- Return the new Buildable state from Conduit.
To make it easier to debug/test this:
- Provide `bin/harbormaster update Bxxx ...` to force foreground update of a Buildable.
Test Plan:
- Used `bin/harbormaster update Bxxx --force --trace` to update buildables.
- Looked at buidlable list, saw statuses reported properly.
- Used Conduit to read statuses.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4809
Differential Revision: https://secure.phabricator.com/D8799
Summary:
Ref T4809. Buildables currently have buildStatus and buildableStatus. Neither are used, and no one knows why we have two.
I'm going to use buildableStatus shortly, but buildStatus is meaningless; burn it.
Test Plan: `grep`, examined similar get/set calls, created a new buildable, ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4809
Differential Revision: https://secure.phabricator.com/D8796
Summary:
Ref T4809. This one is more straightforward. A couple of tweaks:
- Remove the WAITING status, since nothing ever sets it and I suspect nothing ever will with the modern way artifacts work (maybe). At a minimum, it's confusing with the new Target status that's also called "WAITING" but means something different.
- Consolidate 17 copies of these status names into one method.
Test Plan: Ran some queries via Conduit, got reasonable looking results.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4809
Differential Revision: https://secure.phabricator.com/D8795
Summary: Ref T4809. I need to sort out some of the "status" stuff we're doing before this is actually useful (there's no sensible "status" value to expose right now) but once that happens `arc` can query this to figure out whether it needs to warn the user about pending/failed builds.
Test Plan: Ran query with various different parameters.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4809
Differential Revision: https://secure.phabricator.com/D8794
Summary:
For Harbormaster tasks which want to poll or wait, this lets them say "try again a little later" without having to sleep and hold a queue slot.
This is basically the same as failing, except that we don't increment the failure counter. Instead, we just set the current lease to the correct length and then exit. The task will be retried after the lease expires.
Test Plan: Using both `bin/harbormaster` and `phd debug taskmaster`, ran a lot of waiting tasks through the queue, faking them to either yield or not yield in a controlled manner. The queue responded as expected, yielding tasks appropraitely and retrying them later.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8792
Summary:
Without this, build steps that have no options (like "wait for previous commits") don't actually save, since the transaction array is empty.
This also generally nice and consistent.
Test Plan: Created a new "wait" step, viewed transaction log.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8791
Summary:
This hooks up all the pieces of the build pipeline so `harbormaster.sendmessage` actually works. Particularly:
- Candidate build steps (i.e., those which interact with external systems) can now "Wait for Message". This pauses them indefinitely when they complete, until something calls `harbormaster.sendmessage`.
- After processing a target, we check if we should move it to PASSED or WAITING.
- Before updating a build, we move WAITING targets with pending messages to either PASSED or FAILED.
- I added an explicit "Building" state, which doesn't affect workflows but communicates more information to human users.
A big part of this is avoiding races. I believe we get the correct behavior no matter which order events occur in:
- We update builds after targets complete and after we receive messages, so we're guaranteed to update once both these conditions are true. This means messages can't be lost (even if they arrive before a build completes).
- The minor changes to the build engine logic mean that firing additional build updates is always safe, no matter what the current state of the build is.
- The build itself is protected by a lock in the build engine.
- The target is not covered by an explicit lock, but for all states only the engine (waiting) //or// the worker (all other states) can interact with it. All of the interactions also move the target state forward to the same destination and have no other side effects.
- Messages are only consumed inside the engine lock, so they don't need an explicit lock.
Test Plan:
- Made an HTTP request wait after completion, then ran a pile of builds through it using `bin/harbormaster build` and the web UI.
- Passed and failed message-awaiting builds with `harbormaster.sendmessage`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, zeeg
Differential Revision: https://secure.phabricator.com/D8788
Summary: Fixes T4590. Use the credentials custom field to allow Harbormaster HTTP requests to include usernames/passwords.
Test Plan: Ran a build plan with credentials, verified they were sent to the remote server.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4590
Differential Revision: https://secure.phabricator.com/D8786
Summary:
See discussion in D8773. Three small adjustments which should help prevent this kind of issue:
- When queueing followup tasks, hold them on the worker until we finish the task, then queue them only if the work was successful.
- Increase the default lease time from 60 seconds to 2 hours. Although most tasks finish in far fewer than 60 seconds, the daemons are generally stable nowadays and these short leases don't serve much of a purpose. I think they also date from an era where lease expiry and failure were less clearly distinguished.
- Increase the default wait-after-failure from 60 seconds to 5 minutes. This largely dates from the MetaMTA era, where Facebook ran services with high failure rates and it was appropriate to repeatedly hammer them until things went through. In modern infrastructure, such failures are rare.
Test Plan:
- Verified that tasks queued properly after the main task was updated.
- Verified that leases default to 7200 seconds.
- Intentionally failed a task and verified default 300 second wait before retry.
- Removed all default leases shorter than 7200 seconds (there was only one).
- Checked all the wait before retry implementations for anything much shorter than 5 minutes (they all seem reasonable).
Reviewers: btrahan, sowedance
Reviewed By: sowedance
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8774
Summary: Ref T1049. I'm fair sure this is just a case of bad data in my local install, but we probably don't want the default page for Harbormaster to break when there's invalid / missing container or buildable handles on any of the builds.
Test Plan: Loaded the page, didn't get a crash due to null reference.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: demo, epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8608
Summary:
Ref T1049. Currently, the "add" dialog lets you select a build step type, but then immediately creates one. If you "cancel" from the edit screen, you end up with an empty (and almost certainly invalid) build step.
Instead, don't create the step until it's valid.
Test Plan: Add Step -> Pick Type -> Add Step -> Cancel no longer creates empty step.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8605
Summary:
Ref T1049. Allows external systems to send a message to a build target. The primary intended use case is:
- You make an HTTP request to Jenkins.
- The build goes into a "waiting" state.
- Later, Jenkins calls `harbormaster.sendmessage` to report that the target passed or failed.
- The build continues as appropriate.
This is deceptively complicated because:
- There are a lot of race concerns. We might get a message back from an external system before it even responds to the request we made. We want to make sure we process these messages no matter when we receive them.
- These messages need to be sent to a build target (vs a build or buildable) because we'll get into trouble with parallelization later on otherwise (Jenkins is told to do 3 builds; we can't tell which ones failed or what overall state is unless the message are sent to targets).
- I initially thought about implementing this as a separate "Wait for a response from an external system" build step. This gets a lot more complicated for users once we do parallelization, though. Particularly, in the case where you've told Jenkins to do 3 builds, the three "wait" steps need to know which target they're waiting for (and jenkins needs to know some unique identifier for each target). So this pretty much boils down to a more complicated, more error-prone version of using target PHIDs.
This makes the already-muddy Build UI a bit worse, but it needs a general clarity pass anyway (it's showing way too much uninteresting data, and should show a better summary of results instead).
Test Plan:
- This doesn't really do anything interesting yet.
- Used Conduit to send messages to build plans.
- Viewed the messages on the build screen.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8604
Summary: Ref T1049. Tweaks some of the UI and code to improve / clean it up a bit.
Test Plan: Ran build plans, browsed UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8603
