Summary:
Two little issues
1. there was an extra call to getHostForWrite,
2. The engine instance was shared between multiple service definitions so it
was overwriting the list of writable hosts from one service with hosts from another.
Test Plan:
tested in wikimedia production with multiple services defined like this:
```language=json
[
{
"hosts": [
{
"host": "search.svc.codfw.wmnet",
"protocol": "https",
"roles": {
"read": true,
"write": true
},
"version": 5
}
],
"path": "/phabricator",
"port": 9243,
"type": "elasticsearch"
},
{
"hosts": [
{
"host": "search.svc.eqiad.wmnet",
"protocol": "https",
"roles": {
"read": true,
"write": true
},
"version": 5
}
],
"path": "/phabricator",
"port": 9243,
"type": "elasticsearch"
}
]
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D17581
Summary:
Elasticsearch really wants a raw json body and it fails to accept
the request as of es version 5.3
Test Plan:
Tested with elasticsearch 5.2 and 5.3.
Before this change 5.2 worked but 5.3 failed with
`HTTP/406 "Content-Type header [application/x-www-form-urlencoded] is not supported"` [1]
After this change, both worked.
[1] https://phabricator.wikimedia.org/P5158
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17580
Summary:
These exception messages & comments didn't quite match reality.
Fixed and added pht() around a couple of them.
Test Plan: I didn't test this :P
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17578
Summary:
Fixes T12460. Also ":)", ":(", ":/", and oldschool ":-)" variants.
Not included are variants with actual letters (`:D`, `:O`, `:P`) and obscure variants (`:^)`, `:*)`).
Test Plan: Typed `:3` (no emoji summoned). Typed `:dog3` (emoji summoned). Typed `@3` (user autocomplete summoned).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12460
Differential Revision: https://secure.phabricator.com/D17577
Summary:
Ref T12450. The way that config repair and setup issues interact is kind of complicated, and if `cluster.search` is invalid we may end up using `cluster.search` before we repair it.
I poked at things for a bit but wasn't confident I could get it to consistently repair before we use it without doing a big messy change.
The only thing that really matters is whether "type" is valid or not, so just put a slightly softer/more-tailored check in for that.
Test Plan:
- With `"type": "elastic"`, loaded setup issues.
- Before patch: hard fatal.
- After patch: softer fatal with more useful messaging.
{F4321048}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17576
Summary:
Ref T12450. Normally, we validate config when:
- You restart the webserver.
- You edit it with `bin/config set ...`.
- You edit it with the web UI.
However, you can also change config by editing `local.json`, `some_env.conf.php`, a `SiteConfig` class, etc. In these cases, you may miss config warnings.
Explicitly re-run search config checks from `bin/search`, similar to the additional database checks we run from `bin/storage`, to try to produce a better error message if the user has made a configuration error.
Test Plan:
```
$ ./bin/search init
Usage Exception: Setting "cluster.search" is misconfigured: Invalid search engine type: elastic. Valid types are: elasticsearch, mysql.
```
Reviewers: chad, 20after4
Reviewed By: 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17574
Summary:
Ref T12450. Minor cleanup:
- setRoles() has no callers.
- getRoles() has no callers (these two methods are leftovers from an earlier iteration of the change).
- The `hasRole()` logic doesn't work since nothing calls `setRole()`.
- `hasRole()` has only `isreadable/iswritable` as callers.
- The `isReadable()/isWritable()` logic doesn't work since `hasRole()` doesn't work.
Instead, just check if there are any readable/writable hosts. `Host` already inherits its config from `Service` so this gets the same answer without any fuss.
Also add some read/write constants to make grepping this stuff a little easier.
Test Plan:
- Grepped for all removed symbols, saw only newer-generation calls in `Host`.
- See next diff for use of `isWritable()`.
Reviewers: chad, 20after4
Reviewed By: 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17571
Summary:
Ref T12450. This is now pointless and just asserts that `cluster.search` has a default value.
We might restore a fancier version of this eventually, but get rid of this for now.
Test Plan: Scruitinized the test case.
Reviewers: chad, 20after4
Reviewed By: 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17573
Summary:
Ref T12450. This mostly just smooths out the text a little to improve consistency. Also:
- Use `isWritable()`.
- Make the "skipping because not writable" message more clear and tailored.
- Try not to use the word "index" too much to avoid confusion with `bin/search index` -- instead, talk about "initialize a service".
Test Plan: Ran `bin/search init` with a couple of different (writable / not writable) configs, saw slightly clearer messaging.
Reviewers: chad, 20after4
Reviewed By: 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17572
Summary:
[ ] Write an "Upgrading: ..." guidance task with narrow instructions for installs that are upgrading.
[ ] Do we need to add an indexing activity (T11932) for installs with ElasticSearch?
[ ] We should more clearly detail exactly which versions of ElasticSearch are supported (for example, is ElasticSearch <2 no longer supported)? From T9893 it seems like we may //only// have supported ElasticSearch <2 before, so are the two regions of support totally nonoverlapping and all ElasticSearch users will need to upgrade?
[ ] Documentation should provide stronger guidance toward MySQL and away from Elastic for the vast majority of installs, because we've historically seen users choosing Elastic when they aren't actually trying to solve any specific problem.
[ ] When users search for fulltext results in Maniphest and hit too many documents, the current behavior is approximately silent failure (see T12443). D17384 has also lowered the ceiling for ElasticSearch, although previous changes lowered it for MySQL search. We should not fail silently, and ideally should build toward T12003.
[ ] D17384 added a new "keywords" field, but MySQL does not search it (I think?). The behavior should be as consistent across MySQL and Elastic as we can make it. Likely cleaner is giving "Project" objects a body, with "slugs" and "description" separated by newlines?
[ ] `PhabricatorSearchEngineTestCase` is now pointless and only detects local misconfigurations.
[ ] It would be nice to build a practical test suite instead, where we put specific documents into the index and then search for them. The upstream test could run against MySQL, and some `bin/search test` could run against a configured engine like ElasticSearch. This would make it easier to make sure that behavior was as uniform as possible across engine implementations.
[ ] Does every assigned task now match "user" in ElasticSearch?
[x] `PhabricatorElasticFulltextStorageEngine` has a `json_encode()` which should be `phutil_json_encode()`.
[ ] `PhabricatorSearchService` throws an untranslated exception.
[ ] When a search cluster is down, we probably don't degrade with much grace (unhandled exception)?
[ ] I haven't run bin/search init, but bin/search index doesn't warn me that I may want to. This might be worth adding. The UI does warn me.
[ ] bin/search init warns me that the index is "incorrect". It might be more clear to distinguish between "missing" and "incorrect", since it's more comforting to users to see "everything is as we expect, doing normal first-time setup now" than "something is wrong, fixing it".
[ ] CLI message "Initializing search service "ElasticSearch"" does not end with a period, which is inconsistent with other UI messages.
[ ] It might be nice to let bin/search commands like init and index select a specific service (or even service + host) to act on, as bin/storage --ref ... now does. You can generally get the result you want by fiddling with config.
[ ] When a service isn't writable, bin/search init reports "Search cluster has no hosts for role "write".". This is accurate but does not provide guidance: it might be more useful to the user to explain "This service is not writable, so we're skipping index check for it.".
[x] Even with write off for MySQL, bin/search index --type task --trace still updates MySQL, I think? I may be misreading the trace output. But this behavior doesn't make sense if it is the actual behavior, and it seems like reindexAbstractDocument() uses "all services", not "writable services", and the MySQL engine doesn't make sure it's writable before indexing.
[x] Searching or user fails to find task Grant users tokens when a mention is created, suggesting that stemming is not working.
[x] Searching for users finds that task, but fails to find a task containing "per user per month" in a comment, also suggesting that stemming is not working.
[x] Searching for maniphest fails to find task maniphest.query elephant, suggesting that tokenization in ElasticSearch is not as good as the MySQL tokenization for these words (see D17330).
[x] The "index incorrect" warning UI uses inconsistent title case.
[x] The "index incorrect" warning UI could format the command to be run more cleanly (with addCommand(), I think).
refs T12450
Test Plan:
* Stared blankly at the code.
* Disabled 'write' role on mysql fulltext service.
* Edited a task, ran search indexer, verified that the mysql index wasn't being updated.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17564
Summary:
Ref T12272. If you own a package which owns "/", this allows you to force-accept package reviews for packages which own sub-paths, like "/src/adventure/".
The default UI looks something like this:
```
[X] Accept as epriestley
[X] Accept as Root Package
[ ] Force accept as Adventure Package
```
By default, force-accepts are not selected.
(I may do some UI cleanup and/or annotate "because you own X" in the future and/or mark these accepts specially in some way, particularly if this proves confusing along whatever dimension.)
Test Plan: {F4314747}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12272
Differential Revision: https://secure.phabricator.com/D17569
Summary: Ref T10967. This change is similar to D17566, but for rejects.
Test Plan:
- Create a revision as A, with reviewer B.
- Reject as B.
- Request review as A.
- Before patch: stuck in "rejected".
- After patch: transitions back to "needs review".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17568
Summary: Ref T10967. This moves all remaining "request review" pathways (just `differential.createcomment`) to the new code, and removes the old action.
Test Plan: Requested review on a revision, `grep`'d for the action constant.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17567
Summary:
Ref T10967. This is explained in more detail in T10967#217125
When an author does "Request Review" on an accepted revision, void (in the sense of "cancel out", like a bank check) any "accepted" reviewers on the current diff.
Test Plan:
- Create a revision with author A and reviewer B.
- Accept as B.
- "Request Review" as A.
- (With sticky accepts enabled.)
- Before patch: revision swithced back to "accepted".
- After patch: the earlier review is "voided" by te "Request Review", and the revision switches to "Review Requested".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17566
Summary: Before the speling pollice lock us in prisun.
Test Plan: Used a dicationairey.
Reviewers: chad, jmeador
Reviewed By: jmeador
Differential Revision: https://secure.phabricator.com/D17570
Summary:
This implements a simplistic `PhabricatorRepositoryFulltextEngine`
Currently only the repository name, description, timestamps and
status are indexed.
Note: I had to change the `search index` workflow to disambiguate
PhabricatorRepository from PhabricatorRepositoryCommit
Test Plan:
* ran `./bin/search index --type PhabricatorRepository --force`
* searched for some repositories. Saw reasonable results matching on either title or description.
* Edited a repository in the web ui
* Added unique key words to the repo description.
* I was then able to find that repo by searching for the new keywords.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Tags: #search, #diffusion
Differential Revision: https://secure.phabricator.com/D17300
Summary: General CSS and usability touchup of the Remarkup bar states for fullscreen and preview. Larger fonts, more spacing, some hint of the underlying page. Disable buttons that can't be used in preview mode.
Test Plan:
Formal test coming with mobile, browsers. This is a kick the tires upload.
{F4283448}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17563
Summary:
The goal is to make fulltext search back-ends more extensible, configurable and robust.
When this is finished it will be possible to have multiple search storage back-ends and
potentially multiple instances of each.
Individual instances can be configured with roles such as 'read', 'write' which control
which hosts will receive writes to the index and which hosts will respond to queries.
These two roles make it possible to have any combination of:
* read-only
* write-only
* read-write
* disabled
This 'roles' mechanism is extensible to add new roles should that be needed in the future.
In addition to supporting multiple elasticsearch and mysql search instances, this refactors
the connection health monitoring infrastructure from PhabricatorDatabaseHealthRecord and
utilizes the same system for monitoring the health of elasticsearch nodes. This will
allow Wikimedia's phabricator to be redundant across data centers (mysql already is,
elasticsearch should be as well).
The real-world use-case I have in mind here is writing to two indexes (two elasticsearch clusters
in different data centers) but reading from only one. Then toggling the 'read' property when
we want to migrate to the other data center (and when we migrate from elasticsearch 2.x to 5.x)
Hopefully this is useful in the upstream as well.
Remaining TODO:
* test cases
* documentation
Test Plan:
(WARNING) This will most likely require the elasticsearch index to be deleted and re-created due to schema changes.
Tested with elasticsearch versions 2.4 and 5.2 using the following config:
```lang=json
"cluster.search": [
{
"type": "elasticsearch",
"hosts": [
{
"host": "localhost",
"roles": { "read": true, "write": true }
}
],
"port": 9200,
"protocol": "http",
"path": "/phabricator",
"version": 5
},
{
"type": "mysql",
"roles": { "write": true }
}
]
Also deployed the same changes to Wikimedia's production Phabricator instance without any issues whatsoever.
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Tags: #elasticsearch, #clusters, #wikimedia
Differential Revision: https://secure.phabricator.com/D17384
Under some workloads, the taskmaster may hibernate and launch more rapidly
than it should. Require 15 seconds of inactivity before hibernating. Also
hibernate for longer.
Auditors: chad
Under some workloads, the taskmaster may hibernate and launch more rapidly
than it should. Require 15 seconds of inactivity before hibernating. Also
hibernate for longer.
Auditors: chad
The `min()` vs `max()` fix in D17560 meant that the Trigger daemon only
hibernates for 5 seconds, so we do a full GC sweep every 5 seconds. This ends
up eating a fair amount of CPU for no real benefit.
The GC cursors should move to persistent storage, but just bump this default
up in the meantime.
Auditors: chad
The `min()` vs `max()` fix in D17560 meant that the Trigger daemon only
hibernates for 5 seconds, so we do a full GC sweep every 5 seconds. This ends
up eating a fair amount of CPU for no real benefit.
The GC cursors should move to persistent storage, but just bump this default
up in the meantime.
Auditors: chad
If we try to render an edge transaction which uses unknown edge constants,
it turns out we fatal. Degrade instead. This happened when viewing very old
badges.
Auditors: chad
Summary: Ships Badges. I can write up some basic docs too if needed.
Test Plan: /applications/
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17360
Summary: Ref T12270. These no longer have any callsites.
Test Plan: Used `grep` to search for each edge class constant, found no hits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17562
Summary: Ref T12270. Adds a pager, plus a few little cleanups from copy/paste and accumulated cruft.
Test Plan:
- Paginated a user with 180 badges.
- Viewed a user with 0 badges.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17561
Summary: Ref T12298. Like PullLocal daemons, this allows the last daemon in the pool to hibernate if there's no work to be done, and awakens the pool when work arrives.
Test Plan:
- Ran `bin/phd debug task --trace`.
- Saw the pool hibernate and look for tasks.
- Commented on an object.
- Saw the pool wake up and process the queue.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12298
Differential Revision: https://secure.phabricator.com/D17559
Summary:
Ref T11050. The old rule was "you can only resign if you're a reviewer".
With the new behavior of "resign", the rule should be "you can resign if you're a reviewer, or you have authority over any reviewer". Make it so.
Also fixes T12446. I don't know how to reproduce that but I'm pretty sure this'll fix it?
Test Plan:
- Could not resign from a revision with no authority/reviewer.
- Resigned from a revision with myself as a reviewer.
- Resigned from a revision with a package I owned as a reviewer.
- Could not resign from a revision I had already resigned from.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12446, T11050
Differential Revision: https://secure.phabricator.com/D17558
Summary:
Ref T12298. Two minor daemon improvements:
- Make the "waiting" message reflect hibernation.
- Don't trigger a reload right after launching.
Test Plan:
- Read "waiting" message.
- Ran "bin/phd start", didn't see an immediate SIGHUP in the log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12298
Differential Revision: https://secure.phabricator.com/D17550
Summary: Fixes T9363. This drops empty buckets from dashboard panel context. Still see full results in Audit.
Test Plan: Create an "Active Audits" panel, add to Dashboard. See no commits found. Check Audit, see all buckets.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9363
Differential Revision: https://secure.phabricator.com/D17545
Summary: Ref T9363, If we're in a dashboard panel, only show buckets with data, or a fallback if nothing exists.
Test Plan: Test 'active revisions' panel in a dashboard and in Differential.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9363
Differential Revision: https://secure.phabricator.com/D17544
Summary: Ref T12298. This allows the PullLocal daemon to hibernate like the Trigger daemon, but automatically wakes it back up when it needs to do something.
Test Plan:
- Ran `bin/phd debug pulllocal --trace`.
- Saw the daemon hibernate after doing a checkup on repositories.
- Saw periodic queries to look for new update messages.
- After clicking "Update Now" in the web UI to schedule an update, saw the daemon wake up immediately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12298
Differential Revision: https://secure.phabricator.com/D17540
Summary:
Ref T12444. A few issues:
- `x % (y - z)` doesn't generate values in the full range: the largest value is never generated. Instead, use `x % (1 + y - z)`.
- `digestToRange(1, count)` never generates 0. After fixing the first bug, it could generate `count`. The range of the arrays is `0..(count-1)`, inclusive. Generate the correct range instead.
- `unpack('L', ...)` can unpack a negative number on a 32-bit system. Use `& 0x7FFFFFFF` to mask off the sign bit so the result is always a positive integer.
- FileFinder might return arbitrary keys, but we rely on sequential keys (0, 1, 2, ...)
Test Plan:
- Used `bin/people profileimage ... --force` to regenerate images.
- Added some debugging to verify that the math seemed to be working.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12444
Differential Revision: https://secure.phabricator.com/D17543
Summary:
Fixes T12369. When you create objects they may technically be locked: either because the default state is legitimately locked, or because the default policies prevent you from viewing so we sort of technically end in a locked state.
Regardless, don't prompt during creation, since this prompt isn't useful even if the lock detection is completely legitimate.
Test Plan:
- In {nav Applications > Maniphest > Configure}, set "Default View Policy" to "No One".
- Tried to create a task.
- Before patch: prompted to override lock.
- After patch: no override prompt.
Reviewers: chad
Reviewed By: chad
Subscribers: d.maznekov
Maniphest Tasks: T12369
Differential Revision: https://secure.phabricator.com/D17541
Summary:
Ref T12271. Don't do anything with this yet, but store who accepted/rejected/whatever on behalf of reviewers.
In the future, we could use this to render stuff like "Blessed Committers (accepted by epriestley)" or whatever. I don't know that this is necessarily super useful, but it's easy to track, seems likely to be useful, and would be a gigantic pain to backfill later if we decide we want it.
Test Plan: Accepted/rejected a revision, saw reviewers update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12271
Differential Revision: https://secure.phabricator.com/D17537
Summary:
Ref T12271. Currenty, when you "Accept" a revision, you always accept it for all reviewers you have authority over.
There are some situations where communication can be more clear if users can accept as only themselves, or for only some packages, etc. T12271 discusses some of these use cases in more depth.
Instead of making "Accept" a blanket action, default it to doing what it does now but let the user uncheck reviewers.
In cases where project/package reviewers aren't in use, this doesn't change anything.
For now, "reject" still acts the old way (reject everything). We could make that use checkboxes too, but I'm not sure there's as much of a use case for it, and I generally want users who are blocking stuff to have more direct accountability in a product sense.
Test Plan:
- Accepted normally.
- Accepted a subset.
- Tried to accept none.
- Tried to accept bogus reviewers.
- Accepted with myself not a reviewer
- Accepted with only one reviewer (just got normal "this will be accepted" text).
{F4251255}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12271
Differential Revision: https://secure.phabricator.com/D17533
Summary: Hit this while `arc diff`'ing something which is triggering 2+ rules which add reviewers, I think.
Test Plan: Dug this out of a production stack trace; will push and `arc diff` again.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17534
Summary: Fixes T12439. This pathway was just missing a `setContinueOnMissingFields(...)` to skip enforcement of required fields.
Test Plan:
- Added a required custom field.
- Mentioned any task without a field value in a comment.
- Edited that comment.
- Saved changes.
- Before fix: fatal in log.
- After fix: clean edit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12439
Differential Revision: https://secure.phabricator.com/D17536
Summary: Fixes T11865. Part of a 'clean up remarkup' pass, removing Aleo helps simplify coding, is lighter on the wire, and gives a more consistent, clean look.
Test Plan: run celerity, grep for 'aleo' and 'Aleo', test Phriction, tasks
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11865
Differential Revision: https://secure.phabricator.com/D17535
Summary:
Ref T10967. I'm not 100% sure we need this, but the old edge table had it and I recall an issue long ago where not having this key left us with a bad query plan.
Our data doesn't really provide a way to test this key (we have many revisions and few reviewers, so the query planner always uses revision keys), and building a convincing test case would take a while (lipsum needs some improvements to add reviewers). But in the worst case this key is mostly useless and wastes a few MB of disk space, which isn't a big deal.
So I can't conclusively prove that this key does anything to the dashboard query, but the migration removed it and I'm more comfortable keeping it so I'm not worried about breaking stuff.
At the very least, MySQL does select this key in the query plan when I do a "Reviewers:" query explicitly so it isn't //useless//.
Test Plan: Ran `bin/storage upgrade`, ran dashboard query, the query plan didn't get any worse.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17532
Summary:
Fixes T11050. Today, when a user resigns, we just delete the record of them ever being a reviewer.
However, this means you have no way to say "I don't care about this and don't want to see it on my dashboard" if you are a member of any project or package reviewers.
Instead, store "resigned" as a distinct state from "not a reviewer", and treat it a little differently in the UI:
- On the bucketing screen, discard revisions any responsible user has resigned from.
- On the main `/Dxxx` page, show these users as resigned explicitly (we could just hide them, too, but I think this is good to start with).
- In the query, don't treat a "resigned" state as a real "reviewer" (this change happened earlier, in D17517).
- When resigning, write a "resigned" state instead of deleting the row.
- When editing a list of reviewers, I'm still treating this reviewer as a reviewer and not special casing it. I think that's sufficiently clear but we could tailor this behavior later.
Test Plan:
- Resigned from a revision.
- Saw "Resigned" in reviewers list.
- Saw revision disappear from my dashboard.
- Edited revision, saw user still appear as an editable reviewer. Saved revision, saw no weird side effects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11050
Differential Revision: https://secure.phabricator.com/D17531
Summary: Fixes T12434. I accidentally copy/pasted this too much in D17442.
Test Plan: Viewed a form edit page, no longer saw two copies of this action.
Reviewers: chad, cspeckmim
Reviewed By: chad, cspeckmim
Maniphest Tasks: T12434
Differential Revision: https://secure.phabricator.com/D17530
Summary: Ref T10390. Catch if the user doesn't have any dashboards they can edit and give them a helpful message instead.
Test Plan: Clean install, no dashboards, Click "Add to Dashboard" on ApplicationSearch results, see no dashboards message
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17528
Summary: Ref T10390. Dashboard usability is high enough that I think we should pin it by default for users to create custom home pages.
Test Plan: Review order of applications in sandbox.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17527
Summary: Ref T10390. Fixes the missing "fa-dashboard" icon and adds a few more for an even 25.
Test Plan: Create new dashboard, see dashboard icon, select new dashboard icon.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17526
Summary: Ref T10390. I find myself wanting to find dashboards I can edit, even if I am not the author. I think this is useful for larger installs with multiple admins. Also make disabled Dashboards more grey in UI results.
Test Plan: Log in a test user, create a dashboard with I cannot edit. Log into my account, search for editable dashboards and only see mine. Set dashboard to all users, search under test account and see editable dashboards.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17524
Summary: Ref T5307. Just makes the dialog a little easier to use. Picks a name if we already have one.
Test Plan: Test a builtin, custom saved, and a new advanced search (no name).
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5307
Differential Revision: https://secure.phabricator.com/D17523
Summary:
Ref T10967. Improves some method names:
- `Revision->getReviewerStatus()` -> `Revision->getReviewers()`
- `Revision->attachReviewerStatus()` -> `Revision->attachReviewers()`
- `Reviewer->getStatus()` -> `Reviewer->getReviewerStatus()` (this is mostly to make this more greppable)
Test Plan:
- bunch o' `grep`
- Browsed around.
- If I missed anything, it should fatal in an obvious way. We have a lot of other `getStatus()` calls and it's hard to be sure I got them all.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17522
Summary: Ref T10967. The old name was because we had a `getReviewers()` tied to `needRelationships()`, rename this method to use a simpler and more clear name.
Test Plan: `grep`, browsed around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17519
Summary:
Ref T10967. There have been two different ways to load reviewers for a while: `needReviewerStatus()` and `needRelationships()`.
The `needRelationships()` stuff was a false start along time ago that didn't really go anywhere. I believe the idea was that we might want to load several different types of edges (subscribers, reviewers, etc) on lots of different types of objects. However, all that stuff pretty much ended up modularizing so that main `Query` classes did not need to know about it, so `needRelationships()` never got generalized or went anywhere.
A handful of things still use it, but get rid of them: they should either `needReviewerStatus()` to get reviewer info, or the ~3 callsites that care about subscribers can just load them directly.
Test Plan:
- Grepped for removed methods (`needRelationships()`, `getReviewers()`, `getCCPHIDs()`, etc).
- Browsed Diffusion, Differential.
- Called `differential.query`.
It's possible I missed some stuff, but it should mostly show up as super obvious fatals ("call needReviewerStatus() before getReviewerStatus()!").
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17518
Summary:
Ref T10967.
When we query for revisions with particular reviewers, use the new table to drive the query.
When we load revisions for use in the application, also use the new table to drive the query.
This doesn't convert everything: there's some old `loadRelationships()` stuff still using the old table. But this moves the major stuff over.
(This also changes the icon for "commented" from a question mark to a speech bubble.)
Test Plan:
- Viewed revision lists and detail views on old and new code, saw identical outcomes.
- Updated revisions, accepted/rejected/commented on revisions.
- Hit the "Accepted Older" and "Commented Older" states by taking an action and then updating.
- Grepped for removed methods (like `getEdgeData()` and `getDiffID()`).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17517
Summary:
Ref T10967. We have a "commented" state to help reviewers get a better sense of who is part of a discussion, and a "last action" state to help distinguish between "accept" and "accepted an older version", for the purposes of sticky accepts and as a UI hint.
Currently, these are first-class states, partly beacuse we were somewhat limited in what we could do with edges. However, a more flexible way to represent them is as flags separate from the primary state flag.
In the new storage, write them as separate state information: `lastActionDiffPHID` stores the Diff PHID of the last review action (accept, reject, etc). `lastCommentDiffPHID` stores the Diff PHID of the last comment (top-level or inline).
Test Plan: Applied storage changes, commented and acted on a revision. Saw appropriate state reflected in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17514
Summary:
Ref T10967. `differential.createcomment` is a frozen API method which has been obsoleted by `differential.revision.edit`.
It is the only remaining way to apply an "accept", "reject", or "resign" action using the old "ACTION" code.
Instead of using the old code, sneakly apply a new type of transaction in these cases instead.
Then, remove all the remaining old code for this stuff on the write pathways.
Test Plan:
- Used "differential.createcomment" to accept, reject, and resign from a revision.
- Grepped for all removed ACTION_X constants, found them only in rendering code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17513
Summary: Ref T10967. See that task for some discussion. This lets us do double writes on this pathway.
Test Plan: Set an Owners package to auto-review. Created revisions which triggered it: one with no reviewers (autoreview added); one with the package as a blocking reviewer explicitly (no automatic stuff happened, as expected).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17512
Summary:
Ref T10967. This converts the reviewer update action in Herald from an older edge write to a newer ModularTransactions write.
The major value from this is that we get a double-write to the new reviewers table.
Test Plan:
- Wrote a Herald rule to add a reviewer and a blocking reviewer.
- Saw them added properly to a revision with: no reviewers; both as blocking; A as blocking, B as nonblocking; A as nonblocking, B as blocking.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17511
Summary: Ref T5307. Actually check the built in query with query, not engine.
Test Plan: Try a builtin query, and a custom query when making a dashboard panel.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5307
Differential Revision: https://secure.phabricator.com/D17521
Summary: Ref T5307. Adds a better query check query, sets required for the name, adds the correct URI for cancelling.
Test Plan: Test a form without a name, fake a query string, test cancel button.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5307
Differential Revision: https://secure.phabricator.com/D17520
Summary: Ref T5307. This adds an additional action to Use Results for creating a panel from the query.
Test Plan:
Navigate to Maniphest, select dropdown for Use Results. Try any of the following:
- Try to set a panel without a name (fail)
- Muck up query or engine (fail)
- Set a fake Dashboard ID (fail)
Give panel a name and select a dashboard I have edit permissions to, get taken to dashboard.
Reviewers: epriestley
Subscribers: Korvin
Maniphest Tasks: T5307
Differential Revision: https://secure.phabricator.com/D17516
Summary: Fixes T12418. This is a fairly advanced feature and I think users can reasonably consult the documentation for their own editors to figure out how to do this.
Test Plan: Saw no more text.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12418
Differential Revision: https://secure.phabricator.com/D17510
Summary: Fixes T12416. See that task for discussion. Slightly older versions of `git` do not appear to support use of `--` to separate flags and arguments.
Test Plan:
- Ran `bin/repository update PHABX`.
- In T12416, had a user with Git 2.1.4 confirm that `git ls-remote X` worked while `git ls-remote -- X` failed.
- Read `git help ls-remote` to look for any kind of suspicious `--destroy-the-world` flags, didn't see any that made me uneasy.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T12416
Differential Revision: https://secure.phabricator.com/D17508
Summary: Fixes T12416. See that task for discussion. Slightly older versions of `git` do not appear to support use of `--` to separate flags and arguments.
Test Plan:
- Ran `bin/repository update PHABX`.
- In T12416, had a user with Git 2.1.4 confirm that `git ls-remote X` worked while `git ls-remote -- X` failed.
- Read `git help ls-remote` to look for any kind of suspicious `--destroy-the-world` flags, didn't see any that made me uneasy.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T12416
Differential Revision: https://secure.phabricator.com/D17508
Summary:
Ref T5378. This repackages an existing check to see if a URI is a URI for the current install into a more reasonable form.
In an upcoming change, I'll use this new check to test whether `http://example.whatever.com/T123` is a link to a task on the current install or not.
Test Plan: This stuff has good test coverage already; added some more.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5378
Differential Revision: https://secure.phabricator.com/D17502
Summary:
Ref T12392. The logic currently goes like this:
- Try a fetch.
- If that fails, try repairing the origin URI.
- Then try again.
This is pretty complicated, and we can use this simpler logic instead:
- Set the origin URI to the right value.
- Try a fetch.
Setting the origin URI is very fast. This can normally only get us in any trouble in very obscure situations which haven't occurred for many years:
- Pretty much all of this is already covered by `verifyGitOrigin()`, which we run earlier.
- Origins could be configured to have multiple URIs for some reason, but shouldn't be.
- Years ago, you could configure Phabricator to point at a local repository it didn't own and that could conceivably have a different "origin" that you might not want us to delete. If you did this, the daemons have been spewing errors for 3-4 years without you fixing it. The cost of fixing the remote URI is very small even if anyone is affected by this (just set it back to the old value) and there's zero reason to do this and the scenario is ridiculous.
Test Plan: Ran `bin/repository update PHABX --trace --verbose`, saw fetches go through cleanly after URI adjustment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12392
Differential Revision: https://secure.phabricator.com/D17498
Summary:
Ref T12296. Ref T12392. Currently, when we're observing a remote repository, we periodically run `git fetch ...`.
Instead, periodically run `git ls-remote` (to list refs in the remote) and `git for-each-ref` (to list local refs) and only continue if the two lists are different.
The motivations for this are:
- In T12296, it appears that doing this is //faster// than doing a no-op `git fetch`. This effect seems to reproduce locally in a clean environment (900ms for `ls-remote` + 100ms for `for-each-ref` vs about 1.4s for `fetch`). I don't have any explanation for why this is, but there it is. This isn't a huge change, although the time we're saving does appear to mostly be local CPU time, which is good for us.
- Because we control all writes, we could cache `git for-each-ref` in the future and do fewer disk operations. This doesn't necessarily seem too valuable, though.
- This allows us to tell if a fetch will do anything or not, and make better decisions around clustering (in particular, simplify how observed repository versioning works). With `git fetch`, we can't easily distinguish between "fetch, but nothing changed" and "legitimate fetch".
If a repository updates very regularly we end up doing slightly more work this way (that is, if `ls-remote` always comes back with changes, we do a little extra work), but this is normally very rare.
This might not get non-bare repositories quite right in some cases (i.e., incorrectly detect them as changed when they are unchanged) but we haven't created non-bare repositories for many years.
Test Plan: Ran `bin/repository update --trace --verbose PHABX`, saw sensible construction of local and remote maps and accurate detection of whether a fetch would do anything or not.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12392, T12296
Differential Revision: https://secure.phabricator.com/D17497
Summary: Ref T12270. Builds out a BadgeCache for PhabricatorUser, primarily for Timeline, potentially feed? This should still work if we later let people pick which two, just switch query in BadgeCache.
Test Plan: Give out badges, test timeline for displaying badges from handles and without queries. Revoke a badge, see cache change.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17503
Summary:
Fixes T12406. When importing commits, we automatically add auditors if the message lists "Auditors: username".
If the list of auditors includes the commit author, this edit fails because you can't audit your own commits (previously, you sometimes could and/or we didn't validate).
Instead, just ignore "Auditors: author".
Test Plan:
- Made a commit with "Auditors: epriestley".
- Pushed it.
- Saw the HeraldWorker get stuck with the error in T12406.
- Applied the change; worker now succeeded.
Reviewers: chad
Reviewed By: chad
Subscribers: alexmv
Maniphest Tasks: T12406
Differential Revision: https://secure.phabricator.com/D17507
Summary:
Fixes T12409. Config entries may be marked as "deleted", and `bin/config set --database` doesn't un-delete them, so the edit doesn't do anything.
The "most correct" fix here is to swap to transactions so we run the same code, but just fix this narrowly for now since it's one line of code.
Test Plan:
- Set `maniphest.default-priority` to `123`.
- Deleted `maniphest.default-priority` from the web UI by deleting all the text in the box.
- Before patch: `bin/config set --database maniphest.default-priority 789` had no effect.
- After patch: `bin/config set --database maniphest.default-priority 789` worked.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12409
Differential Revision: https://secure.phabricator.com/D17506
Summary: Extends PHUIListItemView to take an icon, link as an "Action Item" that displays on the right side of the menu link. Does not display on Favorites. This allows for adding edit, external, or other links (documentation?) to any menu item. Right now the secondary link is only visible when the item is selected. This feels right, but if we offer it in other ways, users may always want it visible. We could look at making it onhover.
Test Plan:
Add a bunch of random global and personal dashboards to my menu. Add a menu to Favorites, see no link. Test mobile, link works.
{F4136699}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17505
Summary:
Via HackerOne. When you view a raw file in Differential, we currently generate a permanent file with default permissions. This may be incorrect: default permissions may be broader than the diff's permissions.
The other three methods of downloading/viewing raw files ("Download" in Diffusion and Differential, "View Raw" in Diffusion and Differential) already apply policies correctly and generate temporary files. However, this workflow was missed when other workflows were updated.
Beyond updating the workflow, delete any files we've generated in the past. This wipes the slate clean on any security issues and frees up a little disk space.
Test Plan:
- Ran migration script, saw existing files get purged.
- Did "View Raw File", got a new file.
- Verified that the file was temporary and properly attached to the diff, with "NO ONE" permissions.
- Double-checked that Diffusion already runs policy logic correctly and applies appropriate policies.
- Double-checked that "Download Raw Diff" in Differential already runs policy logic correctly.
- Double-chekced that "Download Raw Diff" in Diffusion already runs policy logic correctly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17504
Summary:
Via HackerOne. When you view a raw file in Differential, we currently generate a permanent file with default permissions. This may be incorrect: default permissions may be broader than the diff's permissions.
The other three methods of downloading/viewing raw files ("Download" in Diffusion and Differential, "View Raw" in Diffusion and Differential) already apply policies correctly and generate temporary files. However, this workflow was missed when other workflows were updated.
Beyond updating the workflow, delete any files we've generated in the past. This wipes the slate clean on any security issues and frees up a little disk space.
Test Plan:
- Ran migration script, saw existing files get purged.
- Did "View Raw File", got a new file.
- Verified that the file was temporary and properly attached to the diff, with "NO ONE" permissions.
- Double-checked that Diffusion already runs policy logic correctly and applies appropriate policies.
- Double-checked that "Download Raw Diff" in Differential already runs policy logic correctly.
- Double-chekced that "Download Raw Diff" in Diffusion already runs policy logic correctly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17504
Summary:
Fixes T12400. Adds a "Has MFA" filter to People so you can figure out who you need to harass before turning on "require MFA".
When you run this as a non-admin, you don't currently actually hit the exception: the query just doesn't work. I think this is probably okay, but if we add more of these it might be better to make the "this didn't work" more explicit since it could be confusing in some weird edge cases (like, an administrator sending a non-administrator a link which they expect will show the non-administrator some interesting query results, but they actually just get no constraint). The exception is more of a fail-safe in case we make application changes in the future and don't remember this weird special case.
Test Plan:
- As an administrator and non-administrator, used People and Conduit to query MFA, no-MFA, and don't-care-about-MFA. These queries worked for an admin and didn't work for a non-admin.
- Viewed the list as an administrator, saw MFA users annotated.
- Viewed config help, clicked link as an admin, ended up in the right place.
{F4093033}
{F4093034}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12400
Differential Revision: https://secure.phabricator.com/D17500
Summary: Fixes T12398. This adds `withBadgeStatuses` as a query parameter when searching for Awards to show. In most (all?) cases we currently only show active badges.
Test Plan: Assign myself a badge, archive it and verify it does not appear on profile, comment form, or timeline.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12398
Differential Revision: https://secure.phabricator.com/D17499
Summary: Ref T12264. This allows users to install a dashboard they are viewing to their personal home menu or as a global home menu item. Has some basic ability to be extended later for maybe projects.
Test Plan:
Build a dashboard, click "Install Dashboard".
- As user only get personal option
- As HomeApp edit person, see both options
- Try installation as either, with and without label set
- Fake "global" form as user, get error
- Don't set anything, get error
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12264
Differential Revision: https://secure.phabricator.com/D17492
Summary:
Ref T10967. This is an incremental step toward removing "reviewers" back to a dedicated storage table so we can handle changes like T11050.
This adds the storage table, and starts doing double writes to it (so new or updated reviewers write to both the old edge table and the new "reviewers" table).
Then we can do a migration, swap readers over one at a time, and eventually remove the old write and old storage and then implement new features.
This change has no user-facing impact, it just causes us to write new data to two places instead of one.
This is not completely exhaustive: the Herald "Add Reviewers" action is still doing a manual EDGE transaction. I'll clean that up next and do another pass to look for anything else I missed.
This is also a bit copy/pastey for now but the logic around "RESIGN" is a little different in the two cases until T11050. I'll unify it in future changes.
Test Plan:
- Did a no-op edit.
- Did a no-op comment.
- Added reviewers.
- Removed reviewers.
- Accepted and rejected revisions.
After all of these edits, did a `SELECT * FROM differential_reviewer` manually and saw consistent-looking rows in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17495
Summary: Fix tag alignment on project cards when there are multiple tags. Also fixes T12381.
Test Plan: Review a project and people hovercard in sandbox, ensure multiple tags look as expected.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12381
Differential Revision: https://secure.phabricator.com/D17488
Summary: These were once ordered, but I think we switched to being defined in the Engine and never implemented the sorts there. This adds sort ordering to Tasks, Projects, and Repositories.
Test Plan: Review Favorites Menu in local install, see order is now set per the engine. Click Edit Favorites, and re-order. See order sticks.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17490
Summary:
Ref T12270. This just drops the constraint for now, rather than dealing with all the typecasting stuff and putting us in a position which will almost certainly require backward compatibility breaks in the future.
Also renames "badges.*" to "badge.*" for consistency (all other methods are singular: token.*, project.*, differential.revision.*, etc).
Test Plan:
Saw "qualities" now "Not Supported", while other constraints continue to work:
{F3887194}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17487
Summary: Allow people to award and remove badges via conduit, but not from the standard badges form.
Test Plan:
Build a generator and generate awards. Didn't test the revoke yet.
{F3857766}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17482
Summary:
Fixes T12378. Two minor issues here:
- CAN_INTERACT on tasks uses "USER", but should just use the view policy, which may be more permissive ("PUBLIC").
- CAN_INTERACT is currently prevented from being "PUBLIC" by additional safeguards. Define an explicit capability object for the permission which returns `true` from `shouldAllowPublicPolicySetting()`.
Test Plan:
- Viewed an unlocked task as a logged-out user, saw "login to comment" instead of "locked".
- Viewed a locked task as a logged-out user, saw "locked".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12378
Differential Revision: https://secure.phabricator.com/D17485
Summary: The Safari hack in place casued a truncation issue in Firefox, so that hack is now gone. Instead the bug appears to be the creative inclusion of "space". In fiddling with this adding one space inside the span and one space outside the span seems to resolve all cases.
Test Plan: Chrome, Safari, Firefox. Test "hector" and copy paste of a Task ID.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17483
Summary: This is overly broad and I missed it in local testing with just a single account. Let's pull just the author in.
Test Plan: Review a commit page that wasn't my own, see other authors commits.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17481
Summary: Fixes T12367. CSS here already truncates (or should have been) and is generally more effective. Remove the unneeded server side truncation. Any other UI place these render?
Test Plan: Set Policy to a group name of "Stanford University: Alumni Association and Friends" and see better truncation.
Reviewers: epriestley, eliaspro
Reviewed By: epriestley, eliaspro
Subscribers: eliaspro, Korvin
Maniphest Tasks: T12367
Differential Revision: https://secure.phabricator.com/D17479
Summary: This should be blue, not grey.
Test Plan: Add a milestone and subproject to a project
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17477
Summary: Fixes T10698. This shows badges under the comment preview if the application uses TransactionCommentView. I suspect not everything does, but will pick the fix up for free when modernized.
Test Plan: Test commenting on a task with and without a user that has a badge. See badge preview.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10698
Differential Revision: https://secure.phabricator.com/D17480
Summary: This currently queries all tasks, make it limit to only open tasks.
Test Plan: Assign myself an open and a resolved task. See only open on profile.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17476
Summary: Fixes T12360. I'll probably make a non-audit commit list for this, maybe, eventually, until then add all the needed audit information.
Test Plan: Review commits in my profile, see data and not a fatal.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12360
Differential Revision: https://secure.phabricator.com/D17475
Summary: This just adds a few more dimensions to the generator.
Test Plan: run `bin/lipsum generate badges`, verify new icons and quality work.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17474
Summary: Probably useful if you use Phrequent.
Test Plan: I did not test this beyond lint/unit.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17473
Summary: Mostly a minor nit-pick, but I hate sending users off the profile and disorient them onto application search. These pages are pretty easy to maintain, I don't expect to need to do more here. I dropped Differential outright. Kept Tasks and Commits. Now you can browse everything about a user on their profile without leaving. Maybe add a link to ApplicationSearch? Not sure it's important.
Test Plan: Review tasks and commits on mine and other user profiles.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17470
Summary: Ref T12270. Adds the date the badge was awarded.
Test Plan: Award a badge, see date on profile badge when card is flipped.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17471
Summary: Fixes T10319. This looks for custom profile image, then falls back to a generated profile image.
Test Plan: Create a new user, log in, and see new profile image. Note this seems to break `bin/lipsum generate user`
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10319
Differential Revision: https://secure.phabricator.com/D17467
Summary: Ref T12337. This just fills out a couple more task relationships.
Test Plan: Viewed the edges in the Conduit console, queried for them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12337
Differential Revision: https://secure.phabricator.com/D17465
Summary: Ref T10319. This adds a basic means of generating default profile images for users. You can generate them for everyone, a group of users, or force updates. This only generated images and stores them in files. It does not assign them to users.
Test Plan:
`bin/people profileimage --all` to generate all images.
`bin/people profileimage --users chad` to generate a user.
`bin/people profileimage --all --force` to force rebuilding all images.
{F3662810}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10319
Differential Revision: https://secure.phabricator.com/D17464
Summary:
Ref T12337. Ref T5873. This provides a generic "edge.search" method which feels like other "verison 3" `*.search` methods.
The major issues here are:
1. Edges use constants internally, which aren't great for an API.
2. A lot of edges are internal and probably not useful to query.
3. Edges don't have a real "id", so paginating them properly is challenging.
I've solved these things like this:
- Edges must opt-in to being available via Conduit by providing a human-readable key (like "mention" instead of "52"). This solvs (1) and (2).
- I faked a mostly-reasonable behavior for paginating.
Test Plan:
Ran various valid and invalid searches. Paginated a large search. Reviewed UI.
{F3651818}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12337, T5873
Differential Revision: https://secure.phabricator.com/D17462
Summary: Ref T12335. Allows you to lock tasks to keep your precious tokens.
Test Plan:
- Awarded tokens to an unlocked task.
- Locked the task.
- Could no longer award/rescind tokens.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12335
Differential Revision: https://secure.phabricator.com/D17461
Summary: Ref T10319. Adds in database columns for upcoming default generated avatar support.
Test Plan: Ran storage upgrade, log into local site to verify it didn't blow up.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10319
Differential Revision: https://secure.phabricator.com/D17459
Summary: Ref T10319. This swaps the default in the Picture Chooser to allow picking of the custom unique avatar. We're currently going with 100k unique possibilities. The logic roughly hashes a user name and picks an image pack, color, and border. Based on that, we select the first character of their username, or fall back to Psyduck if not [a-z][0-9].
Test Plan:
Set the following usernames from ProfilePicture as a test: chad, epriestley, sally, 007, _cat_, -doggie-.
{F3453979}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10319
Differential Revision: https://secure.phabricator.com/D17430
Summary:
Ref T12313. This puts a UI on revoking credentials after a widespread compromise like Cloudbleed or a local one like copy/pasting a token into public chat.
For now, I'm only providing a revoker for conduit tokens since that's the immediate use case.
Test Plan:
- Revoked in user + type, everything + user, everywhere + type, and everything + everywhere modes.
- Verified that conduit tokens were destroyed in all cases.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12313
Differential Revision: https://secure.phabricator.com/D17458
Summary: Ref T9010. This adds more icons and lets the IconChooser handle more icons more easier.
Test Plan: Test Project Icons, Badges Icons
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9006, T9010
Differential Revision: https://secure.phabricator.com/D17456
Summary: Fixes T12347. Ref T12314. Validation gets called no matter what, but is only relevant if the form supports subtypes.
Test Plan: Marked/unmarked a Paste form as editable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12347, T12314
Differential Revision: https://secure.phabricator.com/D17457
Summary: Fixes T10798. Separates these two since they don't need to be combined and it allows for more flexibility / scalability.
Test Plan:
- Add Badge
- Edit Badge
- Add myself as Recipient
- Remove myself
- Go to my profile
- Award Badge from there
- Assign myself a badge, try to re-assign it, see validation error.
Also, validation errors on dialog forms are ugly.
{F3495630}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10798, T12270
Differential Revision: https://secure.phabricator.com/D17447
Summary:
This is a consistency change to make this option consistent with `audio-mime-types`, `image-mime-types` and `icon-mime-types`, all of which are locked.
(They're locked because SVG is definitely dangerous, and other types might be dangerous or might become dangerous in the future, although I'm not aware of any actual dangers from video types today.)
Test Plan: Viewed `files.video-mime-types` in Config, saw it was locked.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17454
Summary:
Ref T12335. See that task for discussion. Here are the behavioral changes:
- Statuses can be flagged with `locked`, which means that tasks in that status are locked to further discussion and interaction.
- A new "CAN_INTERACT" permission facilitates this. For most objects, "CAN_INTERACT" is just the same as "CAN_VIEW".
- For tasks, "CAN_INTERACT" is everyone if the status is a normal status, and no one if the status is a locked status.
- If a user doesn't have "Interact" permission:
- They can not submit the comment form.
- The comment form is replaced with text indicating "This thing is locked.".
- The "Edit" workflow prompts them.
This is a mixture of advisory and hard policy checks but sholuld represent a reasonable starting point.
Test Plan: Created a new "Locked" status, locked a task. Couldn't comment, saw lock warning, saw lock prompt on edit. Unlocked a task.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12335
Differential Revision: https://secure.phabricator.com/D17453
Summary:
Ref T12335. Fixes T11207. Edit-like interactions which are not performed via "Edit <object>" are a bit of a grey area, policy-wise.
For example, you can correctly do these things to an object you can't edit:
- Comment on it.
- Award tokens.
- Subscribe or unsubscribe.
- Subscribe other users by mentioning them.
- Perform review.
- Perform audit.
- (Maybe some other stuff.)
These behaviors are all desirable and correct. But, particularly now that we offer stacked actions, you can do a bunch of other stuff which you shouldn't really be able to, like changing the status and priority of tasks you can't edit, as long as you submit the change via the comment form.
(Before the advent of stacked actions there were fewer things you could do via the comment form, and more of them were very "grey area", especially since "Change Subscribers" was just "Add Subscribers", which you can do via mentions.)
This isn't too much of a problem in practice because we won't //show// you those actions if the edit form you'd end up on doesn't have those fields. So on intalls like ours where we've created simple + advanced flows, users who shouldn't be changing task priorities generally don't see an option to do so, even though they technically could if they mucked with the HTML.
Change this behavior to be more strict: unless an action explicitly says that it doesn't need edit permission (comment, review, audit) don't show it to users who don't have edit permission and don't let them take the action.
Test Plan:
- As a user who could not edit a task, tried to change status via comment form; received policy exception.
- As a user who could not edit a task, viewed a comment form: no actions available (just "comment").
- As a user who could not edit a revision, viewed a revision form: only "review" actions available (accept, resign, etc).
- Viewed a commit form but these are kind of moot because there's no separate edit permission.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12335, T11207
Differential Revision: https://secure.phabricator.com/D17452
Summary: Ref T12270. We don't really need these, timeline does it's own thing, badges is now a profile page, and hovercards have been removed.
Test Plan: Visit timeline, still see badges, visit my profile page, bask in the warmth of fake awards.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17448
Summary: Ref T12270. Adds the name of the badge to the subject, fixes the double description.
Test Plan: Edit lots of badges with and without descriptions, see good emails.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17449
Summary: Doesn't seem popular, will rethink dashboard editing again in the future at some point.
Test Plan: Review a dashboard, edit, install.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17450
Summary:
Ref T12314. Ref T6064. Ref T11580. If an install defines several different task create forms (like "Create Plant" and "Create Animal"), allow any of them to be created directly onto a workboard column.
This is just a general consistency improvement that makes Custom Forms and Workboards work together a bit better. We might do something fancier eventually for T6064 (which wants fewer clicks) and/or T11580 (which wants per-workboard control over forms or defaults).
Test Plan:
- Created several different types of tasks directly onto a workboard.
- Faked just one create form, saw the UI unchanged (except that it respects any renaming).
{F3492928}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314, T11580, T6064
Differential Revision: https://secure.phabricator.com/D17446
Summary:
Ref T12314. When we pick an "Edit" form for a subtyped object, only consider forms with the same subtype.
For example, editing an "Animal" uses the forms with subtype "animal" which are marked as edit forms.
This also makes "Create Subtask" carry the parent task's type.
Test Plan:
- Edited an Animal, got an animal edit form.
- Edited a normal task, got a normal task form.
- Edited a paste, got the normal workflow.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17445
Summary:
Ref T12314. Allow tasks to be queried by subtype using a typeahead.
Open to a better default icon. I'll probably let you configure them later.
Just hide this constraint if there's only one subtype.
Test Plan:
- Searched for subtypes.
- Verified that the control hides if there is only one subtype.
{F3492293}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17444
Summary:
Ref T12314. If you set a form to have the "plant" subtype, then create a task with it, save "plant" as the task subtype.
For Conduit, the default subtype is used by default, but a new "subtype" transaction is exposed. You can apply this transaction at create time to create an object of a certain subtype, or at any later time to change the subtype of an object.
This still doesn't do anything particularly useful or interesting.
Test Plan:
- Created a non-subtyped object (a Paste).
- Created "task" and "plant" tasks via different forms.
- Created "default" and "plant" tasks via Conduit.
- Changed the subtype of a task via Conduit.
- Tried to set a bad subtype.
{F3492061}
{F3492066}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17443
Summary:
Ref T12314. This adds a "Change Form Subtype" workflow to the EditEngine form configuration screen, for forms that edit/create objects which support subtyping (for now, only tasks).
For example, this allows you to switch a form from being a "task" form to a "plant" or "animal" form.
Doing this doesn't yet do anything useful or interesting. I'm also not showing it in the UI yet since I'm not sure what we should make that look like (presumably, we should just echo whatever UI we end up with on tasks).
Test Plan:
- Changed the subtype of a task form.
- Verified that the "Change Subtype" action doesn't appear on other forms (for example, those for Pastes).
{F3491374}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17442
Summary: Ref T12314. Provides a field on tasks for storing subtypes. Does nothing interesting yet.
Test Plan:
- Ran storage upgrade.
- Created some tasks.
- Looked in the database.
- Used Conduit to query some tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17441
Summary:
Ref T12314. Builds toward letting you define "animal" and "plant" tasks.
This just adds some configuration. I'll probably add some more quality-of-life options (like "icon") later but these are the only bits I'm sure I'll need.
Test Plan:
- Configured sensible subtypes.
- Tried to configure bad subtypes: bad key, missing "default", duplicate keys. Got sensible error messages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17440
Summary:
Ref T12314. This adds storage so EditEngine forms can later be marked as edit fields for particular types of objects (like an "animal edit form" vs a "plant edit form").
We'll take you to the right edit form when you click "Edit" by selecting among forms with the same subtype as the task.
This doesn't do anything very interesting on its own.
Test Plan:
- Ran `bin/storage upgrade`.
- Verified database got the field with proper values.
- Created a new form, checked the database.
- Ran unit tests.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17439
Summary: Ref T12298. `phd launch` was missed in D17390 and thus broken by D17389.
Test Plan: Launched a daemon with great success.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T12298
Differential Revision: https://secure.phabricator.com/D17429
Summary: Fixes T12338. Resolves an issue where long pastes would be truncated before getting a line count, resulting in an inaccurate line count being returned.
Test Plan: Made a large paste, verified that it displayed the correct number of lines.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T12338
Differential Revision: https://secure.phabricator.com/D17438
Summary: Fixes T12330. Minor UI nit, since we use "disabled" to usually mean "no permission". Makes these links always normal looking.
Test Plan: Review a new project in sandbox.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12330
Differential Revision: https://secure.phabricator.com/D17436
Summary: This is incorrectly starting an ordered sublist.
Test Plan: (o_O)
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17434
Summary: Ref T12331. These changes are intended to make it easier to debug T12331 since I'm having difficulty reproducing the issue locally.
Test Plan:
- Ran `bin/phd debug task --pool 4` and got an autoscaling pool.
- Ran `bin/worker flood --duration 3` and got some 3-second-long tasks to execute with `bin/worker execute ...`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12331
Differential Revision: https://secure.phabricator.com/D17431
Summary: Ref T12331. These changes are intended to make it easier to debug T12331 since I'm having difficulty reproducing the issue locally.
Test Plan:
- Ran `bin/phd debug task --pool 4` and got an autoscaling pool.
- Ran `bin/worker flood --duration 3` and got some 3-second-long tasks to execute with `bin/worker execute ...`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12331
Differential Revision: https://secure.phabricator.com/D17431
Summary: Ref T12324. Adds back this query for search results in dashboards.
Test Plan: Use panel in Dashboard.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12324
Differential Revision: https://secure.phabricator.com/D17428
Summary: Ref T10319. This builds out a reasonably decent avatar generator. 256 colors x 74 images x 2 borders, 38k options. Not completely sure though how names disburse though, so likely half that number. I can add lowercase lettering to double the footprint if needed though.
Test Plan:
UIExamples. Color generator here: http://tools.medialab.sciences-po.fr/iwanthue/
{F3416622}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10319
Differential Revision: https://secure.phabricator.com/D17418
Summary:
Fixes T12322. Allows you to search for commits using the `tagged(...)` repository function, so you can find "any commmit in any repository tagged with android" or similar.
I moved the function from Differential (which was the application using it) to Diffusion (which is more accurately the application which provides it).
I fixed a bug where searching for `tagged(xyz)` would have no effect (constraint was ignored) if there were no repositories tagged with "xyz". The fix isn't perfectly clean, but should work properly for the moment.
Test Plan:
- Searched with `tagged(...)` in Diffusion and Differential.
- Searched by repository.
- Searched with `tagged(...)` for a project with no tagged repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12322
Differential Revision: https://secure.phabricator.com/D17426
Summary:
Ref T12319. With large datasets, the computation of which packages own paths in a revision is needlessly slow.
Improve performance through caching:
- Cache which paths belong to each repository.
- Cache the split fragments of each path.
- Cache the path fragment counts.
- Micro-optimize accessing `$this->path`.
Test Plan:
- Used `bin/lipsum` to generate 4,000 packages with 150,000 paths.
- Created a revision affecting 100 paths in `phabricator/` (these paths mostly overlap with `bin/lipsum` path rules, since Lipsum uses Phabricator-like rules to generate paths).
- Before optimizations, this revision spent about 5.5 seconds computing paths.
- After optimizations, it spends about 275ms.
{F3423414}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12319
Differential Revision: https://secure.phabricator.com/D17424
Summary: Ref T12319. Ref T12270. Allow badges to be generated with `bin/lipsum`. These aren't hugely sophisticated but I'm not sure about the fate of T9010 yet or what's happening with the quality levels, and didn't want to make those changes more difficult.
Test Plan:
- Used `bin/lipsum generate badges --force --quickly` to generate badges.
- Made some coffee and came back to 20K badges.
{F3422200}
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T12319, T12270
Differential Revision: https://secure.phabricator.com/D17422
Summary:
Ref T12319.
- Lipsum can trash an install by creating a lot of junk that's hard to get rid of, so we're cautious about letting you run it. Add a `--force` flag if you're sure you know what you're doing. This makes the edit/test cycle a bit easier when actually writing Lipsum generators.
- Lipsum normally sleeps for a second before creating objects, to give users more control over how much stuff they create and limit the amount of damage caused by mistakes. Sometimes, you want to generate a LOT of stuff because you want to reproduce a performance/scale issue (like T12319). Add a `--quickly` flag to generate objects as fast as possible.
- When loading random users (used as authors, assignees, etc), also load user settings so we can `ConduitCall` with them.
- Allow generators to return a PHID instead of an actual object (more convenient for Conduit-based generators).
Test Plan:
- With next change, ran `lipsum generate badges --force --quickly`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12319
Differential Revision: https://secure.phabricator.com/D17421
Summary:
Ref T12319. Currently, `bin/lipsum` uses substring matches against human-readable text to chose which objects to generate.
Instead:
- Use separate selector keys which are guaranteed to be unique.
- When a match is exact, select only that generator.
- When a match is ambiguous, fail and warn the user.
Test Plan: Generated several types of objects, tried to generate ambiguous objects like "e".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12319
Differential Revision: https://secure.phabricator.com/D17420
Summary: Ref T12319. The product name is misspelled in some methods, and a few places in the documentation.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12319
Differential Revision: https://secure.phabricator.com/D17419
Summary: Looks nicer on profiles, cards. Added some additional colors.
Test Plan: change my avatar a few times
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: avivey, Korvin
Differential Revision: https://secure.phabricator.com/D17416
Summary: We moved to having "no data" strings render in italics, but sometimes it doesn't make sense. This renders out the panel a little more expected.
Test Plan: Clean install of Phabricator, read home page activity box.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17415
