Summary:
Ref T13222. See PHI996. Ref T10743. For context, perhaps see T12171.
Node changed some signatures, behaviors, and error handling here in recent versions. As far as I can tell:
- The `script.runInNewContext(...)` method has never taken a `path` parameter, and passing the path has always been wrong.
- The `script.runInNewContext(...)` method started taking an `[options]` parameter at some point, and validating it, so the bad `path` parameter now throws.
- `vm.createScript(...)` is "soft deprecated" but basically fine, and keeping it looks more compatible.
This seems like the smallest and most compatible correct change.
Test Plan: Under Node 10, started Aphlict. Before: fatal error on bad `options` parameter to `runInNewContext()` (expected dictionary). After: notification server starts.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222, T10743
Differential Revision: https://secure.phabricator.com/D19860
Summary:
Depends on D19858. Ref T13222. See PHI995. In D19635 and related revisions, inline behavior changed to allow you to pre-mark your own inlines as done (as a reviewer) and to pre-mark your inlines for you (as an author).
These actions generate low-value stories in the timeline, like "alice marked 3 comments done." when an author adds some notes to their own revision. These aren't helpful and can be a little misleading.
Instead, just don't count it when someone marks their own inlines as "done". If we throw away all the marks after throwing away the self-marks, hide the whole story.
This happens in three cases:
# You comment on your own revision, and don't uncheck the "Done" checkbox.
# You comment on someone else's revision, and check the "Done" checkbox before submitting.
# You leave a not-"Done" inline on your own revision, then "Done" it later.
Cases (1) and (2) seem unambiguously good/clear. Case (3) is a little more questionable, but I think this still isn't very useful for reviewers.
If there's still a clarity issue around case (3), we could change the story text to "alice marked 3 inline comments by other users as done.", but I think this is probably needlessly verbose and that no one will be confused by the behavior as written here.
(Also note that this story is never shown in feed.)
Test Plan: Created and marked a bunch of inlines as "Done" in Differential and Diffusion, as the author and reviewer/auditor. My own marks didn't generate timeline stories; marking others' comments still does.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19859
Summary:
Ref T13222. See PHI995. Before making a change to inline rendering, consolidate this code for generating the "alice added inlines comments." and "alice marked X inlines as done." transactions.
Both Differential and Diffusion have four very similar chunks of code. Merge them into shared methods and reduce code duplication across the methods.
(In the next change, I plan to hide the "done" story when the mark affects your own inline, since users marking their own inlines as "done" is generally not very interesting or useful.)
Test Plan: As author and reviewer/auditor, added inlines in Differential and Diffusion. As author, marked own and others inlines as done and undone. Got sensible transaction rendering and persistence of "Done".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19858
Summary:
Ref T13222. Fixes T12588. See PHI683. In several cases, we present the user with a choice between multiple major options: Alamnac service types, Drydock blueprint types, Repository VCS types, Herald rule types, etc.
Today, we generally do this with radio buttons and a "Submit" button. This isn't terrible, but often it means users have to click twice (once on the radio; once on submit) when a single click would be sufficient. The radio click target can also be small.
In other cases, we have a container with a link and we'd like to link the entire container: notifications, the `/drydock/` console, etc. We'd like to just link the entire container, but this causes some problems:
- It's not legal to link block eleements like `<a><div> ... </div></a>` and some browsers actually get upset about it.
- We can `<a><span> ... </span></a>` instead, then turn the `<span>` into a block element with CSS -- and this sometimes works, but also has some drawbacks:
- It's not great to do that for screenreaders, since the readable text in the link isn't necessarily very meaningful.
- We can't have any other links inside the element (e.g., details or documentation).
- We can `<form><button> ... </button></form>` instead, but this has its own set of problems:
- You can't right-click to interact with a button in the same way you can with a link.
- Also not great for screenreaders.
Instead, try adding a `linked-container` behavior which just means "when users click this element, pretend they clicked the first link inside it".
This gives us natural HTML (real, legal HTML with actual `<a>` tags) and good screenreader behavior, but allows the effective link target to be visually larger than just the link.
If no issues crop up with this, I'd plan to eventually use this technique in more places (Repositories, Herald, Almanac, Drydock, Notifications menu, etc).
Test Plan:
{F6053035}
- Left-clicked and command-left-clicked the new JS fanciness, got sensible behaviors.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222, T12588
Differential Revision: https://secure.phabricator.com/D19855
Summary:
Ref T13222. Ref T12588. See PHI683. After D19853, "Create Subtask" may pop a dialog to let you choose between multiple forms.
Allow users to configure which forms are available by using `maniphest.subtypes` to choose available children for each subtype. Users may either specify particular subtypes or specific forms.
Test Plan: Configured "Quest" tasks to have "Objective" children, got appropriate prompt behavior. Used "subtypes" and "forms" to select forms; used "forms" to reorder forms.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222, T12588
Differential Revision: https://secure.phabricator.com/D19854
Summary:
Ref T13222. Ref T12588. See PHI683. Currently, "Create Subtask" always uses the first edit form that the user has access to for the same task subtype. (For example, if you "Create Subtask" from a "Bug", you get the first edit form for "Bugs".)
I didn't want to go too crazy with the initial subtype implementation, but it seems like we're generally on firm ground and it's working fairly well: user requests are for more flexibility in using the system as implemented, not changes to the system or confusion/difficulty with any of the tradeoffs. Thus, I'm generally comfortable continuing to build it out in the same direction. To improve flexibility, I want to make the options from "Create Subtask" more flexible/configurable.
I plan to let you specify that a given subtype (say, "Quest") prompts you with creation options for a set of other subtypes (say, "Objective"), or prompts you with a particular set of forms.
If we end up with a single option, we just go into the current flow (directly to the edit form). If we end up with more than one option, we prompt the user to choose between them.
This change is a first step toward this:
- When building "Create Subtask", query for multiple forms.
- The default behavior is now "prompt user to choose among create forms of the same subtype". Previously, it was "use the first edit form of the same subtype". This is a behavioral change.
- The next change will make the selected forms configurable.
- (I also plan to make the dialog itself less rough.)
Test Plan: {F6051067}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222, T12588
Differential Revision: https://secure.phabricator.com/D19853
Summary: Without an existing root document, Phriction shows a nice little "fake" document as the landing page, which has its own nice "Edit this document" button. When showing that page, don't also render the standard "New Document" breadcrumb in the top right. That button always prompts first for a slug name, which is silly when the root document doesn't exist (because the slug name is required to be '').
Test Plan: Loaded Phriction with and without a root document.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19863
Summary: Depends on D19856. Ref T13222. See D19829. Make access to "Track Only" slightly cleaner and more consistent..
Test Plan: Set, edited, and removed "Track Only" settings for a repository. Saw sensible persistence and display behaviors.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19857
Summary:
Ref T13222. See D19829. We're inconsistent about using `getDetail()/setDetail()` to do some ad-hoc reads. Put this stuff in proper accessor methods.
Also a couple of text fixes from D19850.
Test Plan: Set, edited, and removed autoclose branches from a repository. Got sensible persistence and rendering behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19856
Summary: Ref T13222. See PHI992. If you lose an entire cluster, you may want to aggressively demote it out of existence. You currently need to `xargs` your way through this. Allow `--demote <service>`, which demotes all devices in a service.
Test Plan: Demoted with `--demote <device>` and `--demote <service>`. Hit the `--promote service` error.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19850
Summary:
Ref T13222. See PHI992. If you've lost an entire cluster (or have lost a device and are willing to make broad assumptions about the state the device was in) you currently have to `xargs` to thaw everything or do something else creative.
Since this workflow is broadly reasonable, provide an easier way to accomplish the goal.
Test Plan:
- Ran with `--all-repositories`, a list of repositories, both (error) and neither (error).
- Saw a helpful new list of affected repositories.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19849
Summary: Ref T13222. See PHI990. The older `user.query` supports availability information, but it isn't currently available in a modern way. Make it available.
Test Plan: {F6048126}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19851
Summary:
See <https://discourse.phabricator-community.org/t/cannot-accept-commits-in-audit/2166/>.
In D19842, I changed `PhabricatorEditField->shouldGenerateTransactionsFromComment()`.
- Previously, it bailed on `getIsConduitOnly()`.
- After the patch, it bails on a missing `getCommentActionLabel()`.
The old code was actually wrong, and it was previously possible to apply possibly-invalid actions in some cases (or, at least, sneak them through this layer: they would only actually apply if not validated properly).
In practice, it let a different bug through: we sometimes loaded commits without loading their audit authority, so testing whether the viewer could "Accept" the commit or not (or take some other actions like "Raise Concern") would always fail and throw an exception: "Trying to access data not attached to this object..."
Fixing the insufficiently-strict transaction generation code exposed the "authority not attached" bug, which caused some actions to fail to generate transactions.
This appeared in the UI as either an unhelpful error ("You can't post an empty comment") or an action with no effect. The unhelpful error was because we show that error if you aren't taking any //other// actions, and we wouldn't generate an "Accept" action because of the interaction of these bugs, so the code thought you were just posting an empty comment.
Test Plan: Without leaving comments, accepted and rejected commits. No more error messages, and actions took effect.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: stephan.senkbeil, hskiba
Differential Revision: https://secure.phabricator.com/D19845
Summary: Ref T13222. Ref T12588. See PHI683. To make "Create Subtask..." fancier, we need slightly more logic around subtype maps. Upgrade the plain old array into a proper object so it can have relevant methods, notably "get a list of valid child subtypes for some parent subtype".
Test Plan: Created and edited tasks, changed task subtypes. Grepped for affected symbols (`newEditEngineSubtypeMap`, `newSubtypeMap`).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222, T12588
Differential Revision: https://secure.phabricator.com/D19852
Summary:
Ref T13222. See PHI992. If you lose all hosts in a service cluster, you may need to get a list of affected repositories to figure out which backups to pull.
Support doing this via the API.
Test Plan: Queried by service PHID and saw service PHIDs in the call results.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19848
Summary:
Depends on D19831. Ref T13216. See PHI908. Allegedly, a user copied a large repository into itself and then pushed it. Great backup strategy, but it can create headaches for administrators.
Allow a "maximum paths you can touch with one commit" limit to be configured, to make it harder for users to make this push this kind of commit by accident.
If you actually intended to do this, you can work around this by breaking your commit into pieces (or temporarily removing the limit). This isn't a security/policy sort of option, it's just a guard against silly mistakes.
Test Plan: Set limit to 2, tried to push 3 files, got rejected. Raised limit, pushed changes successfully.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19839
Summary: Depends on D19830. Ref T13216. See PHI908. See PHI750. See PHI885. Allow users to configure a filesize limit, and allow them to adjust the clone/fetch timeout.
Test Plan:
{F6021356}
- Configured a filesize limit and pushed, hit it. Made the limit larger and pushed, change went through.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19831
Summary:
Depends on D19829. Ref T13216. See PHI908. The current implementation is kind of a lot to live in `CommitHookEngine` and will likely fail if `git diff-tree` produces more than 2GB of output.
Pull it out and make it slightly more robust against enormous commits. It's probably limited by this, now:
```
implode("\n", $every_path)
```
We could replace that with some `PhutilReverseRopeSource` primitive or something but since we don't have one of those and it seems unlikely that we'll hit this case in practice, I left it here for now with just the easy stuff converted to be stream-oriented.
Test Plan:
Used this script to test the query against various commits, got good results:
```
<?php
require_once 'scripts/init/init-script.php';
$viewer = PhabricatorUser::getOmnipotentUser();
$repository = id(new PhabricatorRepositoryQuery())
->setViewer($viewer)
->withCallsigns(array('P'))
->executeOne();
var_dump(
id(new DiffusionLowLevelFilesizeQuery())
->setRepository($repository)
->withIdentifier($argv[1])
->execute());
```
Used this to find large commits in history and pull filesizes (worked great, although our largest commit only touches a couple thousand paths):
```
for hash in `git log --format=%H`; do echo -n $hash; echo -n ' '; git diff-tree -r --no-commit-id $hash | wc -l | awk '{print $1}'; done | awk '{print $2 " " $1}' | sort -n
```
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19830
Summary: Depends on D19826. Ref T13216. We have a fair number of options here; add some groups so the "Build" stuff can go in a little subcategory and such.
Test Plan: {F6020896}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19827
Summary:
Ref T13216. See PHI985. We currently use a banner to warn you when a revision has no reviewers or only disabled users, but since the changes to track "Resign" more explicilty we'll no longer warn you if everyone has resigned.
(Previously, they'd no longer be reviewers, so you'd end up with the "no reviewers are assigned" warning if everyone resigned.)
This can still interact slightly oddly with some states (e.g., only a package or project reviewer) but I'd like to wait for T731 to tighten those cases up, and they're more advanced/unusual.
Test Plan:
{F6026832}
{F6026833}
{F6026834}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19834
Summary: Ref T13222. See PHI986. See PHI896. Harbormaster build targets don't currently have a modern "*.search" API, but there's no reason not to provide one (even if some of the use cases are a little bit questionable).
Test Plan: {F6032423}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19841
Summary:
Ref T13222. See PHI683. Currently, you can "Change subtype..." via Conduit and the bulk editor, but not via the comment action stack or edit forms.
In PHI683 an install is doing this often enough that they'd like it to become a first-class action. I've generally been cautious about pushing this action to become a first-class action (there are some inevitable rough edges and I don't want to add too much complexity if there isn't a use case for it) but since we have evidence that users would find it useful and nothing has exploded yet, I'm comfortable taking another step forward.
Currently, `EditEngine` has this sort of weird `setIsConduitOnly()` method. This actually means more like "this doesn't show up on forms". Make it better align with that. In particular, a "conduit only" field can already show up in the bulk editor, which is goofy. Change this to `setIsFormField()` and convert/simplify existing callsites.
Test Plan:
There are a lot of ways to reach EditEngine so this probably isn't entirely exhaustive, but I think I got pretty much anything which is likely to break:
- Searched for `setIsConduitOnly()` and `getIsConduitOnly()`, converted all callsites to `setIsFormField()`.
- Searched for `setIsLockable()`, `setIsReorderable()` and `setIsDefaultable()` and aligned these calls to intent where applicable.
- Created an Almanac binding.
- Edited an Almanac binding.
- Created an Almanac service.
- Edited an Almanac service.
- Edited a binding property.
- Deleted a binding property.
- Created and edited a badge.
- Awarded and revoked a badge.
- Created and edited an event.
- Made an event recurring.
- Created and edited a Conpherence thread.
- Edited and updated the diff for a revision.
- Created and edited a repository.
- Created and disabled repository URIs.
- Created and edited a blueprint.
- Created and edited tasks.
- Created a paste, edited/archived a paste.
- Created/edited/archived a package.
- Created/edited a project.
- Made comments.
- Moved tasks on workboards via comment action stack.
- Changed task subtype via comment action stack.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19842
Summary:
Ref T13222. See PHI873. Currently, when applications prompt users to enter MFA, their session upgrades as a side effect.
In some cases (like managing your email addresses) it makes sense to upgrade your session for a little while since it's common to make multiple edits in sequence (add a new address, make it primary, remove an old address). We generally want MFA to stay out of the way and not feel annoying.
In other cases, we don't expect multiple high-security actions in a row. Notably, PHI873 looks at more "one-shot" use cases where a prompt is answering a specific workflow. We already have at least one of these in the upstream: answering an MFA prompt when signing a Legalpad document.
Introduce a "token" workflow (in contrast to the existing "session") workflow that just does a one-shot prompt without upgrading your session statefully. Then, make Legalpad use this new workflow.
Note that this workflow has a significant problem: if the form submission is invalid for some other reason, we re-prompt you on resubmit. In Legalpad, this workflow looks like:
- Forget to check the "I agree" checkbox.
- Submit the form.
- Get prompted for MFA.
- Answer MFA prompt.
- Get dumped back to the form with an error.
- When you fix the error and submit again, you have to do another MFA check.
This isn't a fatal flaw in Legalpad, but would become a problem with wider adoption. I'll work on fixing this (so the MFA token sticks to the form) in the next set of changes.
Roughly, this is headed toward "MFA sticks to the form/workflow" instead of "MFA sticks to the user/session".
Test Plan:
- Signed a legalpad document with MFA enabled.
- Was prompted for MFA.
- Session no longer upgraded (no purple "session in high security" badge).
- Submitted form with error, answered MFA, fixed error, submitted form again.
- Bad behavior: got re-prompted for MFA. In the future, MFA should stick to the form.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13222
Differential Revision: https://secure.phabricator.com/D19843
Summary:
Ref T13216. I want to add some new management options to repositories (e.g., filesize limit, clone timeouts). Before adding new stuff here, update the UI to a full-width, Phortune-style UI.
This partially reverts D18523. About a year ago, several UIs got converted to fixed-width (repository management, config, settings, instance management in SAAS). I didn't think these were good changes and have never really gotten used to them. The rationale wasn't clear to me and these changes just felt like "be more like GitHub". I think usability is significantly worse, e.g. actions are now hidden inside button menus instead of immediately visible.
Phortune also got converted less dramatically to a full-width-with-menu UI, which I like much better. Adjust repository management to use that UI style instead of the fixed-width style.
Test Plan:
{F6020884}
Viewed every panel, including the Subversion panel.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19826
Summary:
Ref T13216. See PHI985. If you disable cookies in Firefox, accessing `window.localStorage` throws an exception. Currently, this pretty much kills all scripts on the page.
Instead, catch and ignore this, as though `window.localStorage` was not defined.
Test Plan:
- Set Firefox to "no cookies".
- Loaded any page while logged out.
- Before: JS fatal early in the stack.
- After: page loads and JS works.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19832
Summary:
Ref T13216. Ref T13217. Currently, we build this query in a weird way so we end up with `(1, 2, 3)` on both 32-bit and 64-bit systems.
I can't reproduce the string-vs-int MySQL key issue on any system I have access to, so just simplify this and format as `('1', '2', '3')` instead.
The issue this is working around is that MySQL would (I think?) sometimes appear to do something goofy and miss the key if you formatted the query with strings. I never really nailed this down and could have either been mistaken about it or it could be fixed in all modern versions of MySQL. Until we have better evidence to the contrary, assume MySQL is smart enough to handle this sensibly now.
Test Plan: Ran daemons with Feed publish workers, no longer received query warnings.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13217, T13216
Differential Revision: https://secure.phabricator.com/D19837
Summary:
Ref T13216. See PHI985. When you click a line number to start an inline comment, we intend to initiate the action only if you used the left mouse button (desktop) or a touch (tablet/device).
We currently have a `not right` condition for doing this, but it only excludes right clicks, not middle clicks (or other nth-button clicks). The `not right` condition was sligthly easier to write, but use an `is left` condition instead of a `not right` condition.
Test Plan:
- In Safari, Firefox and Chrome:
- Used left click to start an inline.
- Used middle click to do nothing (previously: started an inline).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19836
Summary:
Ref T13216. See PHI985. This config option once controlled adding a Herald transcript link to email. However, this was never implemented in a generic way and was removed from revisions in D8459 and from commits in D10705. No one has noticed or asked for this option for several years, so this is probably a good opportunity to simplify the software and reduce the total amount of configuration.
If we did want to pursue this in the future, I'd generally prefer to make it part of the mail detail page (`/mail/detail/12345/`) anyway.
Test Plan: Grepped for `metamta.herald.show-hints` and `addHeraldSection()`, got no hits for either.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19833
Summary:
Ref T13216. See PHI985. You currently can't commandeer an abandoned revision, but this workflow is perfectly fine.
The caution here is just around weird use cases where, e.g., users want to reopen a revision to add a revert to it. These workflows tend to create problems so we try to guide users away from them.
Test Plan: {F6026841}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19835
Summary: Depends on D19837. Ref T13216. See PHI985. There's an off-by-one error here between how inline comments store "length" and how context rendering treats "length". We need to add 1 to the length, but currently do it a little too early. Do it slightly later so that inlines on the final line of a file render properly.
Test Plan: Left an inline on the final line of a new file, saw it render properly in HTML mail.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19838
Summary:
Ref T13216. Fixes T12920. See PHI911. If you reject a revision and then resign from it, it stays in "Needs Revision".
There's some arguable motivation for this, but it's inconsistent with how "Accept" works (if the last accepting reviewer resigns, we kick you out of "Accepted"). Make it consistent.
Test Plan:
- As the only reviewer: requested changes to a revision, then resigned.
- Before: revision stays in "Needs Revision".
- After: revision moves back to "Needs Review".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216, T12920
Differential Revision: https://secure.phabricator.com/D19840
Summary:
Depends on D19827. Ref T13221. Ref T13216. To prepare Repositories for a move to ModularTransactions, throw away some very old transaction rendering code.
This will cause these very old transactions (none of which have been written since at least April 2016) to render "epriestley edited this repository." instead of "epriestley changed the SSH login for this repository from X to Y."
These edits were generally obsoleted by repository URIs, Passphrase credentials, and general modernization.
Test Plan: Grepped for all constants, got no hits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13221, T13216
Differential Revision: https://secure.phabricator.com/D19828
Summary: Ref T13216. See PHI984. The CommitSearchEngine (and, by extension, `diffusion.commit.search`) currently do not support identifier search, but this is a reasonable capability to provide.
Test Plan:
Testing that a commit exists on `master`:
{F6020742}
Same commit is not on `stable`:
{F6020743}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19825
Summary:
Ref T13216. See PHI916. Harbormaster builds may be long-running, particularly if they effectively wrap `ssh ... ./run-huge-build.sh`. If we spend more than a few seconds waiting for futures to resolve, close idle database connections.
The general goal here is to reduce the held connection load for installs with a very large number of test runners.
Test Plan: Added debugging code to `phlog()` closures, saw connections closed while running builds.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19824
Summary:
Depends on D19816. Ref T13216. See PHI908. See PHI750. In a few cases, users have pushed multi-gigabyte files full of various things that probably shouldn't be version controlled. This tends to create various headaches.
Add support for limiting the maximum size of any object. Specifically, we:
- list all the objects each commit touches;
- check their size after the commit applies;
- if it's over the limit, reject the commit.
This change doesn't actually hook the limit up (the limit is always "0", i.e. unlimited), and doesn't have Mercurial or SVN support. The actual parser bit would probably be better in some other `Query/Parser` class eventually, too. But it at least roughly works.
Test Plan:
Changed the hard-coded limit to other values, tried to push stuff, got sensible results:
```
$ echo pew >> magic_missile.txt && git commit -am pew && git push
[master 98d07af] pew
1 file changed, 1 insertion(+)
# Push received by "local.phacility.net", forwarding to cluster host.
# Acquiring write lock for repository "spellbook"...
# Acquired write lock immediately.
# Acquiring read lock for repository "spellbook" on device "local.phacility.net"...
# Acquired read lock immediately.
# Device "local.phacility.net" is already a cluster leader and does not need to be synchronized.
# Ready to receive on cluster host "local.phacility.net".
Counting objects: 49, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (48/48), done.
Writing objects: 100% (49/49), 3.44 KiB | 1.72 MiB/s, done.
Total 49 (delta 30), reused 0 (delta 0)
remote: +---------------------------------------------------------------+
remote: | * * * PUSH REJECTED BY EVIL DRAGON BUREAUCRATS * * * |
remote: +---------------------------------------------------------------+
remote: \
remote: \ ^ /^
remote: \ / \ // \
remote: \ |\___/| / \// .\
remote: \ /V V \__ / // | \ \ *----*
remote: / / \/_/ // | \ \ \ |
remote: @___@` \/_ // | \ \ \/\ \
remote: 0/0/| \/_ // | \ \ \ \
remote: 0/0/0/0/| \/// | \ \ | |
remote: 0/0/0/0/0/_|_ / ( // | \ _\ | /
remote: 0/0/0/0/0/0/`/,_ _ _/ ) ; -. | _ _\.-~ / /
remote: ,-} _ *-.|.-~-. .~ ~
remote: * \__/ `/\ / ~-. _ .-~ /
remote: \____(Oo) *. } { /
remote: ( (..) .----~-.\ \-` .~
remote: //___\\ \ DENIED! ///.----..< \ _ -~
remote: // \\ ///-._ _ _ _ _ _ _{^ - - - - ~
remote:
remote:
remote: OVERSIZED FILE
remote: This repository ("spellbook") is configured with a maximum individual file size limit, but you are pushing a change ("98d07af863e799509e7c3a639404d216f9fc79c7") which causes the size of a file ("magic_missile.txt") to exceed the limit. The commit makes the file 317 bytes long, but the limit for this repository is 1 bytes.
remote:
# Released cluster write lock.
To ssh://local.phacility.com/source/spellbook.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'ssh://epriestley@local.phacility.com/source/spellbook.git'
```
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: joshuaspence
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19817
Summary:
Ref T13216. See PHI943. When you have a large number of cluster bindings for a repository, the UI sorting can be a bit hard to manage.
One install that regularly cycles repository cluster devices had a couple dozen older disabled bindings, with the enabled bindings intermingled.
Sort the UI:
- enabled devices come first;
- in each group, sort by name.
Test Plan: Mixed disabled/enabled bindings, loaded {nav Diffusion > Repository > Storage} page with clustering configured. Before: relatively unhelpful sort order. After: more intuitive sort order.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19813
Summary: Ref T13217. This older query does some manual joins; update it for more modern joins.
Test Plan: Ran `instances/` unit tests and got a clean result, browsed Phortune merchants.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13217
Differential Revision: https://secure.phabricator.com/D19820
Summary:
Ref T13216. See PHI980. Currently, each application in {nav Applications > X > Configure} has a "Can Configure Application" permission which is hard-coded to "Administrators".
There's no technical reason for this, there just hasn't been a great use case for unlocking it. I think when I originally wrote it our protections against locking yourself out of things weren't that great (i.e., it was easier to set the policy to something that prevented you from editing it after the new policy took effect). Our protections are better now.
The major goal here is to let installs open up Custom Forms for given applications (mostly Maniphest) to more users, but the other options mostly go hand-in-hand with that.
Also, in developer mode, include stack traces for policy exceptions. This makes debugging weird stuff (like the indirect Config application errors here) easier.
Test Plan:
- Granted "Can Configure Application" for Maniphest to all users.
- Edited custom forms as a non-administrator.
- Configured Maniphest as a non-administrator.
- Installed/uninstalled Maniphest as a non-administrator.
- Tried to lock myself out (got an error message).
{F6015721}
Reviewers: amckinley, joshuaspence
Reviewed By: joshuaspence
Subscribers: joshuaspence
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19822
Summary:
Depends on D19814. Ref T13216. See PHI885. For various eldritch reasons, `git fetch` can hang. Although we'd probably like to fix this with `git fetch --require-sustained-network-transfer-rate=512KB/5s` or similar, that flag doesn't exist and we don't have a reasonable way to build it.
Short of that, move toward formalizing a repository "copy time limit": the longest amount of time anything may spend trying to make a copy of this repository.
This grows out of the existing intracluster sync limit, which is effectively the same thing. Here, apply it to `git clone` and `git fetch` in Drydock working copy construction, too. A future change may make it configurable.
Test Plan:
- Set the limit to 0.001.
- Tried to build and lease working copies, got sensible timeout errors (see D19815).
```
<Activation Failed> Lease activation failed: [CommandException] Command killed by timeout after running for more than 0.001 seconds.
COMMAND
ssh '-o' 'LogLevel=quiet' '-o' 'StrictHostKeyChecking=no' '-o' 'UserKnownHostsFile=/dev/null' '-o' 'BatchMode=yes' -l '********' -p '2222' -i '********' '127.0.0.1' -- '(cd '\''/var/drydock/workingcopy-163/repo/spellbook/'\'' && git clean -d --force && git fetch && git reset --hard)'
```
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19816
Summary: Depends on D19810. Ref T13217. Ref T13216. I mostly used `grep implode | grep OR` and `grep implode | grep AND` to find these -- not totally exhaustive but should be a big chunk of the callsites that are missing `%LO` / `%LA`.
Test Plan:
These are tricky to test exhaustively, but I made an attempt to hit most of them:
- Browsed Almanac interfaces.
- Created/browsed Calendar events.
- Enabled/disabled/showed the lock log.
- Browsed repositories.
- Loaded Facts UI.
- Poked at Multimeter.
- Used typeahead for users and projects.
- Browsed Phriction.
- Ran various fulltext searches.
Not sure these are reachable:
- All the lint stuff might be dead/unreachable/nonfunctional?
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13217, T13216
Differential Revision: https://secure.phabricator.com/D19814
Summary:
Ref T6960. Ref T13217. Ref T13216. Depends on D19811. Use the recently-introduced "%P" conversion ("Password/Secret") to load sessions in SessionEngine.
This secret isn't critical to protect (it's the //hash// of the actual secret and not useful to attackers on its own) but it shows up on every page in DarkConsole and is an obvious case where `%P` is a more appropriate conversion.
Test Plan:
Note "*********" in the middle of the output here, instead of a session key hash:
{F6012805}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13217, T13216, T6960
Differential Revision: https://secure.phabricator.com/D19812
Summary:
Ref T13216. See PHI970. Ref T13054. See some discussion in T13216.
When a Harbormaster Buildable object is first created for a Diff, it has no `containerPHID` since the revision has not yet been created.
We later (after creating a revision) send the Buildable a message telling it that we've added a container and it should re-link the container object.
Currently, we send this message in `applyExternalEffects()`, which runs inside the Differential transaction. If Harbormaster races quickly enough, it can read the `Diff` object before the transaction commits, and not see the container update.
Add a `didCommitTransaction()` callback after the transactions commit, then move the message code there instead.
Test Plan:
- See T13216 for substantial evidence that this change is on the right track.
- Before change: added `sleep(15)`, reproduced the issue reliably.
- After change: unable to reproduce issue even with `sleep(15)` (the `containerPHID` always populates correctly).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216, T13054
Differential Revision: https://secure.phabricator.com/D19807
Summary:
See PHI975. Ref T13216. Ref T2543. Previously, see D19204 and PHI433.
When you're acting on a draft revision, we change the button text to "Submit Quietly" as a hint that your actions don't generate notifications yet.
However, this isn't accurate when one of your actions is "Request Review", which causes the revision to publish.
Allow actions to override the submit button text, and make the "Request Review" action change the button text to "Publish Revision".
The alternative change I considered was to remove the word "Quietly" in all cases.
I'm not //thrilled// about how complex this change is to adjust one word, but the various pieces are all fairly clean individually. I'm not sure we'll ever be able to use it for anything else, but I do suspect that the word "Quietly" was the change in D19204 with the largest effect by far (see T10000).
Test Plan:
- Created a draft revision. Saw "Submit Quietly" text.
- Added a "Request Review" action, saw it change to "Publish Revision".
- Reloaded page, saw stack saved and "Publish Revision".
- Removed action, saw "Submit Quietly".
- Repeated on a non-draft revision, button stayed put as "Submit".
- Submitted the various actions, saw them have the desired effects.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216, T2543
Differential Revision: https://secure.phabricator.com/D19810
Summary: See PHI977. Ref T13216. Some text, like long package names, may overflow hovercards. Add overflow CSS behaviors to remedy this.
Test Plan:
Before:
{F6012699}
After:
{F6012700}
(You can use `/search/hovercard/` to render hovercards in a handy standalone way.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19809
Summary: Ref T13216. See D19666. It's currently tricky to profile Herald test runs since you have to submit a form and repeating them is a bit of a mess. Provide a simple CLI wrapper so we can use `--xprofile`. This is also maybe nice-to-have if we're ever debugging anything here.
Test Plan: Ran `bin/herald test --object ... --type ...` and got a sensible looking transcript in the UI.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13216
Differential Revision: https://secure.phabricator.com/D19806
