Summary:
Depends on D19065. Ref T13054. Instead of just updating `containerPHID` and hoping for the best, queue a proper BuildWorker to process a "your container has changed, update it" message.
We also need to remove a (superfluous) `withContainerPHIDs()` when loading active diffs for a revision.
Test Plan:
- Without daemons, created a revision and saw builds stick in "preparing" with no container PHID, but also stay in draft mode.
- With daemons, saw builds actually build and get the right container PHID.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19066
Summary:
Depends on D19064. Ref T13054. See that task for additional discussion.
When buildables are created by `arc` and have lint/unit messages, they can currently pass or fail before Herald triggers actual builds. This puts them in a pre-build state where they can't complete until Herald says it's okay.
On its own, this change intentionally strands `arc diff --only` diffs in the "PREPARING" stage forever.
Test Plan:
- Ran a build with `bin/harbormaster`, saw it build normally.
- Ran a build with web UI, saw it build normally.
- Ran a build with `arc diff`, saw it build normally.
- Ran a build with `arc diff --only`, saw it hang in "PREPARING" forever.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19065
Summary: Depends on D19063. Ref T13054. Prepare for the addition of a new `PREPARING` status by getting rid of the "scattered mess of switch statements" pattern of status management.
Test Plan: Searched/browsed buildables. Viewed buildables. Viewed revisions. Grepped for all affected symbols.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19064
Summary: Ref T13054. Companion storage change for D19062.
Test Plan: Applied migration and adjustments. Viewed messages in Harbormaster; created them with `harbormaster.sendmessage`; processed them with `bin/phd debug task`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19063
Summary:
See T13054. This prepares for Buildables to be sent messages ("attach", "done scheduling builds") to fix races between Harbormaster and Differential.
The `buildTargetPHID` is replaced with a `recipientPHID` in the API. An additional change will fix the storage.
In the future, this table could probably also replace `HarbormasterBuildCommand` now, which is approximately the same bus, but for Builds.
Test Plan: Viewed builds with messages. Sent messages with `harbormaster.sendmessage`. Processed messages with `bin/phd debug task`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19062
Summary:
Ref T13054. Fixes T10746. Fixes T11154. This is really a one-line fix (include `ABORTED` in `BuildEngine->updateBuildable()`) but try to structure the code a little more clearly too and reduce (at least slightly) the number of random lists of status attributes spread throughout the codebase.
Also add a header tag for buildable status.
Test Plan: Aborted a build, saw buildable fail properly.
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054, T11154, T10746
Differential Revision: https://secure.phabricator.com/D19055
Summary:
Ref PHI261. This moves Harbormaster build status to work more similarly to other modern status types, like Differential revision status, where we try to specify as much behavior on the server as possible so that the client and server can vary independently.
(I don't have any specific plans to make Harbormaster build status configurable on the server side, but it isn't out of the question.)
Test Plan: Ran `harbormaster.querybuilds` (saw same data as before) and `harbormaster.build.search` (saw same data as before, plus new ANSI color data).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18838
Summary:
Ref T2543. Fixes T10109.
Currently, Herald only runs in Differential when a change updates the diff. This is partly for historical reasons, and partly because we don't want to restart builds every time someone makes a comment. However, this behavior is inconsistent with other applications (which always trigger on any change), and occasionally confusing to users (in T10109, for example) or otherwise undesirable.
A similar issue is that T2543 has introduced a "Draft" state, where revisions don't send normal mail until builds finish. This interacts poorly with "Send me an email" rules (which shouldn't do anything here) and particularly with "Send me an email + only run these actions the first time the rule matches", since that might have an effect like "do nothing when the revision is created, then never anything again since you already did nothing once".
To navigate both of these issues, let objects tell Herald that certain actions (like mail or builds) are currently forbidden. If a rule uses a field or action which is currently forbidden, the whole rule automatically fails before it executes, but doesn't count toward "only the first time" as far as Herald's tracking of rule execution is concerned.
Then, forbid mail for draft revisions, and forbid builds for revisions which didn't just get updated. Forbidding mail fixes the issues with "Send me an email" that were created by the introduction of the draft state.
Finally, make Herald run on every revision update, not just substantive updates to the diff. This resolves T10109.
Test Plan:
Created revisions via the draft -> submit workflow, saw different transcripts. Here's a mail action being forbidden for a draft:
{F5237324}
Here's a build action being forbidden for a "mundane" update:
{F5237326}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T10109, T2543
Differential Revision: https://secure.phabricator.com/D18731
Summary: See PHI176. We issue a query with only `artifactIndex` from `BuildTarget`, but don't have an applicable key.
Test Plan: This isn't on the normal Harbormaster execution path so I'm not 100% sure I have a local repro, but will confirm with customer.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18732
Summary:
Ref T2543. When a revision is created, we check if any builds are waiting/failed, and submit it for review immediately if we aren't waiting for anything.
In doing this, we ignore builds with only autotargets, since these are client-side and failures from local `arc lint` / `arc unit` should not count (the user has already chosen to ignore/skip them).
The way we do this has some issues:
- Herald may have started builds, but they may still be PENDING and not have any targets yet. In this case, we'll see "no non-autotargets" and ignore the build, which is wrong.
- We have to load targets but don't really care about them, which is more work than we really need to do.
- And it's kind of complex, too.
Instead, just let `BuildQuery` filter out "autobuilds" (builds generated from autoplans) with a JOIN.
Test Plan: Ran `arc diff` with builds configured, got a clean "Draft" state instead of an incorrect promotion directly to "Needs Review".
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18721
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary: Fixes T12883. The task seems correct to me and I think this is a copy/paste mistake that probably blames to me.
Test Plan: Fiddled these numbers, viewed a build in Harbormaster, saw the adjusted time.
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12883
Differential Revision: https://secure.phabricator.com/D18177
Summary:
Ref T12173.
- If we want to fetch a tag, Buildkite needs it as a "branch" (this means more like "ref to fetch").
- The API gets upset if we pass "refs/tags/...", so just pass the tag name without the prefix, which works.
- Do a better job with commits and pass a real branch to fetch.
Test Plan:
- Built a commit with Buildkite.
- Build a revision with Buildkite.
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12173
Differential Revision: https://secure.phabricator.com/D17282
Summary: Ref T12173. This might need some additional work but the basics seem like they're in good shape.
Test Plan:
- Buildkite is "bring your own hardware", so you need to launch a host to test anything.
- Launched a host in AWS.
- Configured Buildkite to use that host to run builds.
- Added a Buildkite build step to a new Harbormaster build plan.
- Used `bin/harbormaster build ...` to run the plan.
- Saw buildkite execute builds and report status back to Harbormaster
{F2553076}
{F2553077}
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12173
Differential Revision: https://secure.phabricator.com/D17270
Summary:
Fixes T9276. Fixes T8650. The story so far:
- We once published build updates to Revisions.
- An unrelated fix (D10911) sent them to the Diffs instead of Revisions, which isn't useful, since you can't see a diff's timeline anywhere.
- This also caused a race condition, where the RevisionEditor and DiffEditor would update the diff simultaneously (T8650).
- The diff update was just disabled to avoid the race (part of D13441).
- Instead, allow the updates to go somewhere else. In this case, we send commit updates to the commit but send diff updates to the revision so you can see 'em.
- Since everything will be using the revision editor now, we should either get proper lock behavior for free or it should be easy to add if something whack is still happening.
- Overall, this should pretty much put us back in working order like we were before D10911.
This behavior is undoubtedly refinable, but this should let us move forward.
Test Plan:
Saw a build failure in timeline:
{F2304575}
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T9276, T8650
Differential Revision: https://secure.phabricator.com/D17139
Summary: Fixes T11910. I spent a couple of minutes looking for the root cause without much luck, but this will all be obsoleted by an eventual upgrade to `EditEngine` anyway.
Test Plan: Set and unset "Wait for Message", which now worked.
Reviewers: chad, avivey
Reviewed By: avivey
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11910
Differential Revision: https://secure.phabricator.com/D16919
Summary:
Ref T11887. This isn't a great fix but makes the method behave properly until I get around to a real fix.
In the longer term, I want to convert all of this pluggable Harbormaster/Drydock stuff (blueprints, artifacts, build plans) to use EditEngine + EditField instead of the weird mishmash of older/custom stuff it currently uses. However, this is a more involved project to execute and I'd like to be in that area of the codebase first so it gets adequate testing.
Until that happens, just put a reasonble-ish mechanism in place to let artifacts correct inbound types. This is the only artifact type and only parameter which needs casting.
Test Plan:
- Made a `curl` call to `harbormaster.createartifact` to create a URI artifact with `?...&ui.external=1`.
- Before patch: type error on `ui.external` not being a boolean.
- After patch: artifact created successfully.
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11887
Differential Revision: https://secure.phabricator.com/D16887
Summary: Fixes T11642. Added a 'name' field to the results from harbormaster.build.search.
Test Plan: Went to `/conduit/method/harbormaster.build.search/` and ran a search that would yield results (because otherwise there will be nothing there). Noted that there was, in fact, a name in the results.
Reviewers: yelirekim, #blessed_reviewers, epriestley
Reviewed By: yelirekim, #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Maniphest Tasks: T11642
Differential Revision: https://secure.phabricator.com/D16569
Summary:
Ref T10867 for original use case. This workflow provides a plausible way for administrators to stop the daemons when performing upgrades or maintenance, then bring those daemons back up without resulting in the failure of builds that were running at the time.
On our organization's phab install, builds are running 24/7. The majority of these builds last for at least several minutes, and contain build steps which fail if interrupted and then resumed, as happens when turning daemons on and off.
Instead of allowing these build steps to resume execution as normal, this workflow will instruct active builds to restart their entire build process instead of just resuming whichever step they were on.
Test Plan:
contrived a build plan which would fail if resumed partway through:
- lease a working copy
- command `touch restart_{build.id}`
- command `test -e restart_{build.id} && rm restart_{build.id} && sleep 60`
followed old procedure:
- run a few of these builds manually
- `./bin/phd stop`
- `./bin/phd start`
- saw the builds fail
followed new procedure:
- run a few of these builds manually
- `./bin/phd stop`
- `./bin/harbormaster restart --active`
- `./bin/phd start`
- saw the builds pass
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T10867
Differential Revision: https://secure.phabricator.com/D16485
Summary: See T10746.
Test Plan: Fail one of several builds, run `./bin/harbormaster update`, see that Build Status is Failed.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, O14 ATC Monitoring, yelirekim
Maniphest Tasks: T10746
Differential Revision: https://secure.phabricator.com/D16480
Summary: Ref T11132, significantly cleans up the Config app, new layout, icons, spacing, etc. Some minor todos around re-designing "issues", mobile support, and maybe another pass at actual Group pages.
Test Plan: Visit and test every page in the config app, set new items, resolve setup issues, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam, Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16468
Summary:
Ref T11473. When running `harbormaster.build.search` with a `buildables` constraint, the constraint doesn't get passed to the Query and so currently has no effect.
This piece of logic was just accidentally omitted from D16356. It is probably not used anywhere today and doesn't show up in the UI, so it's easy to overlook (I missed it in review, too).
Test Plan: Ran `harbormaster.build.search` with a `buildables` constraint, got expected filtering.
Reviewers: yelirekim, chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11473
Differential Revision: https://secure.phabricator.com/D16395
Summary: Fixes T11409. This syntax isn't compatible with older PHP.
Test Plan: Ran `arc lint` on the file.
Reviewers: yelirekim, chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11409
Differential Revision: https://secure.phabricator.com/D16358
Summary: We deprecate the existing API method used to access build information from the API, but preserve its response structure after calling through to the new method. I've cordoned off the fields I needed to define in order to meet the output structure by putting those fields in a search attachment.
Test Plan:
Used the API console and looked at the list view controller for builds.
Old output structure:
```lang=json
{
"data": [
{
"id": "16823",
"phid": "PHID-HMBD-xghrwfz6luoye5rgc2hq",
"uri": "https://secure.phabricator.com/harbormaster/build/16823/",
"name": "Run Core Tests",
"buildablePHID": "PHID-HMBB-s6ykzm2jzxz4ymduztq3",
"buildPlanPHID": "PHID-HMCP-pcfxcgyoif67l3buc4zt",
"buildStatus": "passed",
"buildStatusName": "Passed"
}
],
"cursor": {
"limit": 100,
"after": "16823",
"before": null
}
}
```
New output structure:
```lang=json
{
"data": [
{
"id": 1,
"type": "HMBD",
"phid": "PHID-HMBD-qpgcmv67tzaauzayzit5",
"uri": "http://ec2-54-165-244-168.compute-1.amazonaws.com/harbormaster/build/1/",
"name": "arc lint + arc unit",
"buildStatusName": "Passed",
"buildablePHID": "PHID-HMBB-qdefith5uakkepqpjr2g",
"buildPlanPHID": "PHID-HMCP-zswbhazb7ipmaf4plygg",
"buildStatus": "passed",
"initiatorPHID": "PHID-USER-rihx4366f3aczsvc2wtb",
"dateCreated": 1450295643,
"dateModified": 1450295644,
"policy": {
"view": "users",
"edit": "users"
}
}
],
"maps": {},
"query": {
"queryKey": null
},
"cursor": {
"limit": 100,
"after": null,
"before": null,
"order": null
}
}
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16356
Summary:
It's only natural for users to be interested their own builds. We are also building in support for other sources of builds, the only formally supported way to run a build right now is via Herald.
In our third party codebase, we designate an application as the "thing" that started builds which are scheduled and managed automatically by phabricator. I believe this is a common practice elsewhere in the codebase when you're at a loss for a real human identity and you need to apply some transactions.
Test Plan: Ran some builds manually and saw them show up under the list of things I've run. Looking up builds based on those that had been started by a herald rule.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16353
Summary:
We're picking three useful groups of build statuses to provide as default queries:
- Stuff not yet building
- Stuff building
- Stuff which has finished building
These are reasonable buckets for builds since (unlike most objects in phabricatorland) users are generally waiting impatiently for the machine to do something for them, rather than being responsible for doing something with the machine.
Test Plan: clicked around the search engine and enjoyed my defaults
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16349
Summary:
This supports a few basic use cases that aren't served by the buildable search engine:
- I'm trying to discover when the last time that this particular build plan failed was.
- I want to know if any builds have deadlocked.
- At a glance, I'm more interested in what build plans are running, not which buildables are being built. This is more often than not the case.
Test Plan: {F1744003}
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16347
Summary: Ref T10628. This moves everything else over. I'll clean up the cruft in the next diff.
Test Plan:
- Viewed Conduit API page, toggled tabs.
- Viewed Harbormaster build, toggled tabs.
- Viewed a Drydock lease, swapped tabs.
- Viewed a Drydock resource, swapped tabs.
- Viewed mail, swapped tabs.
- Grepped for `addPropertyList(...)`, looked for any remaining calls with a second argument.
- Also checked rSAAS for any calls, but we don't have anything there that uses tabs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10628
Differential Revision: https://secure.phabricator.com/D16207
Summary:
Ref T11153. If you have a build plan like this:
- Lease machine A.
- Lease machine B.
- Run client-tests on machine A.
- Run server-tests on machine B.
...and we get machine A quickly, then finish the tests, we currently do not release machine A until the whole plan finishes.
In the best case, this wastes resources (something else could be using that machine for a while).
In a worse case, this wastes a lot of resources (if machine B is slow to acquire, or the server tests are much slower than the client tests, machine A will get tied up for a really long time).
In the absolute worst case, this might deadlock things.
Instead, release artifacts as soon as no waiting/running steps take them as inputs. In this case, we'd release machine A as soon as we finished running the client tests.
In the case where machines A and B are resources of the same type, this should prevent deadlocks. In all cases, this should improve build throughput at least somewhat.
Test Plan:
I wrote this build plan which runs a "fast" step (10 seconds) and a "slow" step (120 seconds):
{F1691190}
Before the patch, running this build plan held the lease on the "fast" machine for the full 120 seconds, then released both leases at the same time at the very end.
After this patch, I ran this plan and observed the "fast" lease get released after 10 seconds, while the "slow" lease was held for the full 120.
(Also added some `var_dump()` into things to sanity check the logic; it appeared correct.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11153
Differential Revision: https://secure.phabricator.com/D16145
Summary:
Ref T11137. This class is removed in D16099. Depends on D16099.
`PhutilURI` now attempts to "just work" with Git-style URIs, so at least in theory we can just delete all of this code and pretend it does not exist.
(I've left "Display URI" and "Effective URI" as distinct, at least for now, because I think the distinction may be relevant in the future even though it isn't right now, and to keep this diff small, although I may go remove one after I think about this for a bit.)
Test Plan:
- Created a new Git repository with a Git URI.
- Pulled/updated it, which now works correctly and should resolve the original issue in T11137.
- Verified that daemons now align the origin to a Git-style URI with a relative path, which should resolve the original issue in T11004.
- Grepped for `PhutilGitURI`.
- Also grepped in `arcanist/`, but found no matches, so no patch for that.
- Checked display/conduit URIs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11137
Differential Revision: https://secure.phabricator.com/D16100
Summary: Going to render these all normal case instead of all caps, and bump up the font size. Should be more consistent. Yellow if you green anything orange.
Test Plan: grep, lint
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15645
Summary: Cleans up EditEngine, adds new layout to EditEngine and descendents
Test Plan: Test creating a new form, reordering, marking and unmarking defaults. View new forms.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15531
Summary:
Ref T10537. For Nuance, I want to introduce new sources (like "GitHub" or "GitHub via Nuance" or something) but this needs to modularize eventually.
Split ContentSource apart so applications can add new content sources.
Test Plan:
This change has huge surface area, so I'll hold it until post-release. I think it's fairly safe (and if it does break anything, the breaks should be fatals, not anything subtle or difficult to fix), there's just no reason not to hold it for a few hours.
- Viewed new module page.
- Grepped for all removed functions/constants.
- Viewed some transactions.
- Hovered over timestamps to get content source details.
- Added a comment via Conduit.
- Added a comment via web.
- Ran `bin/storage upgrade --namespace XXXXX --no-quickstart -f` to re-run all historic migrations.
- Generated some objects with `bin/lipsum`.
- Ran a bulk job on some tasks.
- Ran unit tests.
{F1190182}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15521
Summary: Updates the Harbormaster UI to match the new two column everywhere else.
Test Plan: Did best I could, tested builds, plans, steps, buildables. Unable to test lint/unit locally, I need to set that up. Kick the tires for me pls. :3
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15523
Summary: Ref T9456. This makes everything work, except that CircleCI doesn't fetch tags which are not ancestors of branch heads.
Test Plan: Ran passing builds through CircleCI.
Reviewers: chad
Reviewed By: chad
Subscribers: dpaola2, JustinTulloss
Maniphest Tasks: T9456
Differential Revision: https://secure.phabricator.com/D14288
Summary: Ref T9456. Some rough edges and we can't complete the build yet since I haven't written a webhook, but this mostly seems to be working.
Test Plan:
- Ran this build on some stuff.
- Ran a normal HTTP step build to make sure I didn't break that.
{F880301}
{F880302}
{F880303}
Reviewers: chad
Reviewed By: chad
Subscribers: JustinTulloss, joshma
Maniphest Tasks: T9456
Differential Revision: https://secure.phabricator.com/D14286
Summary:
First pass at converting Differential, I likely have some buggy-poos but thought I'd toss this up now in case very bad bugs present.
To do:
- Need to put status back on Hovercards
- "Diff Detail" probably needs a better design
Test Plan: Looking at lots of diffs, admittedly I dont have harbormaster, etc, running locally. Checked Diffusion for Table of Content changes on small and large commits.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15463
Summary:
Ref T10537. More infrastructure:
- Put a `bin/nuance` in place with `bin/nuance import`. This has no useful behavior yet.
- Allow sources to be searched by substring. This supports `bin/nuance import --source whatever` so you don't have to dig up PHIDs.
Test Plan:
- Applied migrations.
- Ran `bin/nuance import --source ...` (no meaningful effect, but works fine).
- Searched for sources by substring in the UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15436
Summary: Ref T10093. Changes must be pushed to staging before they can be landed from the web.
Test Plan:
Changes must be pushed to staging before they can be landed from the web.
{F1161909}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10093
Differential Revision: https://secure.phabricator.com/D15427
Summary:
Every caller returns `true`. This was added a long time ago for Projects, but projects are no longer subscribable.
I don't anticipate needing this in the future.
Test Plan: Grepped for this method.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15409
Summary:
Ref T10457.
- Let blueprints be tagged so you can search and annotate them a little more easily.
- Give each blueprint type an optional icon to make things a little easier to parse visually.
Test Plan:
- Tagged blueprints.
- Searched by tags.
- Looked at nice little icons.
{F1139712}
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T10457
Differential Revision: https://secure.phabricator.com/D15392
Summary:
Ref T5822.
- After a log is closed, compress it if possible.
- Provide `bin/harbormaster archive-logs` to make it easier to change the storage format of logs.
Test Plan:
- Ran `bin/harbormaster archive-logs` on a bunch of logs, compressing and decompressing them without issues (same hashes, same decompressed size across multiple iterations).
- Ran new builds, verified logs were compressed after they closed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5822
Differential Revision: https://secure.phabricator.com/D15380
Summary: Ref T5822. This will make it easier to compress and archive chunks without needing to hold them in memory.
Test Plan: Ran a build, looked at some logs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5822
Differential Revision: https://secure.phabricator.com/D15378
