Summary:
Ref T13072. Further modularize build messages by applying each one in a separate transaction type.
This makes it easier to add new types of messages (although I have no particular plans to do this, offhand) and reduces the amount of switch-boilerplate.
This will probably also simplify validating "harbormaster.sendmessage".
Test Plan:
- Applied all commands.
- Ran migration, saw transactions render properly
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21690
Summary:
Ref T13072. These two similar tables don't make sense to keep separate. Instead, make Build a valid receiver for BuildMessage objects.
These tables are practically the same, so this is straightforward: just copy the rows in and then drop the old table.
(This table was trivial and ephemeral anyway, so I'm not bothering to do the usual "keep it around for a couple years just in case".)
Test Plan:
- Populated BuildCommand table, ran migration, saw Builds end up in the proper transitional state (e.g., pausing, aborting, restarting) with appropriate queued messages.
- Queued new messages by clicking UI buttons.
- Ran BuildWorkers, saw them process messages and mark them as consumed.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D21684
Summary: Replaced the old logo with a new png.
Test Plan: I only tested that the new image was the same dimensions, format and filename as the old one.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D21661
Summary:
Ref T13658. This just scrubs some of the simple references from the codebase.
Most of what's left is in documentation which won't be relevant for a fork and/or which I need to separately revise (or more-or-less delete) at some point anyway.
I removed the "install RHEL" and "install Ubuntu" scripts outright since I don't have any reasonable way to test them and don't plan to maintain them.
Test Plan: Grepped for "phacility", "epriestley"; ran unit tests.
Reviewers: cspeckmim
Reviewed By: cspeckmim
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13658
Differential Revision: https://secure.phabricator.com/D21678
Summary: See T13657. An install has "watcher" packages which should not allow owners to "Force Accept" other packages.
Test Plan:
- Created package A, which I own, on "/", with "Weak" authority.
- Created package B, which I do not own, on "/src".
- Created a revision which touches "/src" and added package B as a reviewer.
- Attempted to accept the revision...
- Before patch: permitted to "Force Accept" for package B.
- After patch: not allowed to "Force Accept" for package B.
- Verified that setting package "A" back to "Strong" authority allows a force-accept for package B.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D21674
Summary:
The datepicker could step by the wrong number of months, due to the date rolling over to the next month when the number of days in the month is exceeded. For example, going forward from January 31 would jump to March 3, while going backward from July 31 would only go to July 1.
Push the date back to ensure that the datepicker stays in the correct month when switching.
Test Plan: Changed months starting from an assortment of dates.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: artms, Korvin
Differential Revision: https://secure.phabricator.com/D21673
Test Plan: Looked at new files, made sure the only changes were to rename the files in line with the documentation
Reviewers: O1 Blessed Committers, eax
Reviewed By: O1 Blessed Committers, eax
Subscribers: speck, tobiaswiese
Maniphest Tasks: T15017
Differential Revision: https://we.phorge.it/D25010
Summary: Ref T13559. Substantially correct the client logic for "Save" and "Cancel" actions to handle unusual cases.
Test Plan:
Quoting behavior:
- Quoted a comment.
- Cancelled the quoted comment without modifying anything.
- Reloaded page.
- Before changes: quoted comment still exists.
- After changes: quoted comment is deleted.
- Looked at comment count in header, saw consistent behavior (before: weird behavior).
Empty suggestion behavior:
- Created a new comment on a suggestable file.
- Clicked "Suggest Edit" to enable suggestions.
- Without making any text or suggestion changes, clicked "Save".
- Before changes: comment saves, but is empty.
- After changes: comment deletes itself without undo.
General behavior:
- Created and saved an empty comment (deletes itself).
- Created and saved a nonempty comment (saves as draft).
- Created and saved an empty comment with an edit suggestion (saves).
- Created and saved an empty comment with a suggestion to entirely delete lines -- that is, no suggestion text (saves).
- Edited a comment, saved without changes (save).
- Edited a comment, save deleting all text (saves -- note that this is intentionally without undo, since this is a lot of steps to do by accident).
- Cancel editing an unchanged comment (cancels without undo).
- Cancel editing a changed comment (cancels with undo).
- Undo'd, got text back.
- Cancel new comment with no text (deletes without undo).
- Cancel new comment with text (deletes with undo).
- Undo'd, got text back.
- Saved a quoted comment with no changes (saves -- note that this is intentionally not a "delete", since just quoting someone seems fine if you click "Save" -- maybe you want to come back to it later).
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21654
Summary:
Ref T13559. Various client decisions depend on the "initial" or "committed" states of inline comments. Previously, these were informally constructed from "mostly similar" available values, or glossed over in some cases.
On the server, save the initial state when creating a comment. Save the committed state when applying a "save" operation. Send all three states to the client.
On the client, load and track all three states explicitly.
Test Plan: Created inlines, etc. See followups.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21653
Summary:
Ref T13559. Currently, the default text for inline comment side-loads in a bizarre way. Instead, when a user creates an inline comment, load the inline context and set it as part of the initial content state.
This allows the side channel (and the code that puts the text in place at the last second on the client) to be removed.
Test Plan: Created inlines, clicked "Suggest Edit". See followup changes.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21652
Summary:
Ref T13559. To allow the client to make correct decisions about what buttons mean, track an explicit "Committed" content state.
This is the last version of the comment that has been saved on the server, and does not exist if the comment has never been saved.
Test Plan: Created comments, etc. See followups.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21651
Summary:
Ref T13559. When the user clicks the "Cancel" button, we sometimes take it to mean "delete" (when the comment is empty).
Both the client and server make a decision about this, and they may not agree, which causes the client to fall out of sync.
Make the client responsible for deciding whether it wants to interpret a click on the "Cancel" button as a "revert" or a "delete".
Test Plan: Cancelled empty and nonempty comments, etc. See followup changes.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21649
Summary:
Ref T13559. When you click "Save" on an inline comment and it's empty, we may actually delete the comment.
Currently, the client and server both make decisions about whether the comment should be deleted. These decisions may not agree, causing the client state to fall out of sync.
Make the client authoritative about whether it wants to handle the user clicking the "Save" button as an intent to save or an intent to delete.
Test Plan: Saved empty and nonempty inlines. See followup changes.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21648
Summary:
Ref T13559. Instead of directly reading form state, make all callers use the "active" state instead. The state reads the form.
No functional changes, just clarifying responsiblites.
Test Plan: Created inlines, etc. See followup changes.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21647
Summary:
Ref T13559. Rather than reading from the document, make client inlines actively track their current "active" state.
The "active" state is what the user currently sees in the client UI.
Test Plan: Created inlines, etc. See followups.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21646
Summary:
Ref T13559. In an effort to ultimately fix the "quote + cancel" bug, begin formalizing content states on the client.
This creates a "ContentState" client object and moves the authoritative storage for the "hasSuggestion" property to it.
Test Plan: Created inlines, etc. See followups.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21645
Summary:
Ref T13559. D21261 added caching here, but the logic in rebuilding inlines wasn't quite correct, and could lead to us double-appending.
Instead, when rebuilding, unconditionally discard the old list.
Test Plan:
- Added inline comments to a file in Differential.
- Marked some done.
- Scrolled so the inline comment header was visible, saw "X / Y Comments" button in header.
- Clicked "Show 20 more lines" on the changeset with inlines (or toggle "View Unified" / "View Side-by-Side", or other interactions likely work too).
- Before: saw "X / Y" change improperly (because inlines in that file were double-counted).
- After: saw stable count.
- Grepped for "differential-inline-comment-refresh", got no hits, concluded this event has no listeners.
Maniphest Tasks: T13559
Differential Revision: https://secure.phabricator.com/D21642
Summary:
Ref T13644. Ref T13638.
- Double-encode the symbol that is used as a path component, similar to Diffusion.
- Fix an outdated reference to ".path", which provided context for symbol lookup.
- Prevent command-clicking headers from looking up the path as a symbol.
Test Plan:
- Command-clicked headers, no longer got a symbol.
- Command-clicked stuff with "/", saw it double-encoded and decoded properly.
- Command-clicked normal symbols, saw "path" populate correctly.
Maniphest Tasks: T13644, T13638
Differential Revision: https://secure.phabricator.com/D21641
Summary:
Ref T9764. These stars are inconsistent, not accessible, and generally weird. They predate icons.
Update them to use icons instead.
Test Plan:
{F8545721}
{F8545722}
{F8545723}
Maniphest Tasks: T9764
Differential Revision: https://secure.phabricator.com/D21640
Summary: Ref T13065. Migrate "mailKey" and drop the column.
Test Plan: Ran "bin/storage upgrade", got a clean upgrade, saw migrated values in mail properties table.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13065
Differential Revision: https://secure.phabricator.com/D21634
Summary: Ref T13065. Migrate "mailKey" and drop the column.
Test Plan: Ran "bin/storage upgrade", got a clean report, saw migrated data in mail properties table.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13065
Differential Revision: https://secure.phabricator.com/D21633
Summary: Ref T13065. Ref T13641. Migrate "mailKey" and drop the column.
Test Plan: Ran "bin/storage upgrade", got a clean report, saw keys migrate in mail properties table.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13641, T13065
Differential Revision: https://secure.phabricator.com/D21632
Summary: Ref T13065. Ref T13641. Migrate "mailKey" and drop the column.
Test Plan: Ran "bin/storage upgrade", got a clean report, saw mail keys migrated to mail properties table.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13641, T13065
Differential Revision: https://secure.phabricator.com/D21631
Summary: Ref T13065. Ref T13641. Migrate "mailKey" and drop the column.
Test Plan: Ran "bin/storage upgrade", got a clean report and saw binding mail keys in the mail properties table.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13641, T13065
Differential Revision: https://secure.phabricator.com/D21630
Summary: Ref T13641. Ref T13065. Migrate and drop the onboard "mailKey" column for Almanac Services.
Test Plan: Ran storage migration, got clean report, saw migrated value in mail properties table.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13641, T13065
Differential Revision: https://secure.phabricator.com/D21629
Summary:
Ref T13641. Add a "status" property with most of the relevant support code.
This currently has no impact on use of the device or bindings by Diffusion or Drydock: they ignore the status of devices bound to services.
Test Plan:
- Created a new device.
- Changed the status of a device via web and API.
- Queried for devices via API.
- Searched for active and disabled devices.
- Viewed UI in list view, detail view.
- Used typeahead to add a new binding to an interface on a disabled device, got disabled hint in typeahead UI.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13641
Differential Revision: https://secure.phabricator.com/D21627
Summary: Ref T13065. See similar changes attached to that task.
Test Plan: Ran migration, got a clean database state, saw mail keys populate in mail property table.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13065, T13641
Differential Revision: https://secure.phabricator.com/D21625
Summary:
Ref T13639. Make schema changes:
- Make repositoryID nullable, for revisions with no repository.
- Remove "epoch", which has no readers and no clear use.
- Change the ordering of the key, since "pathID" has more unique values and no queries ever issue without it.
Test Plan:
- Ran `bin/storage upgrade`, got a clean schema.
- Reindexed all revisions with an external script.
- Reviewed index via debug UI, saw appropriate index for non-repositoy revisions.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13639
Differential Revision: https://secure.phabricator.com/D21617
Summary:
Fixes T13622. Figuring out what permissions we have seems difficult, so address this a bit more narrowly:
- Make the "access denied" error message a bit more helpful.
- Tailor error handling for the "CREATE TEMPORARY TABLE" statement.
Test Plan:
- Created a new user, granted them "SELECT ON *.*" but not "CREATE TEMPORARY TABLE", ran `bin/storage upgrade --force --apply phabricator:20210215.changeset.02.phid-populate.php`.
- Before: fairly opaque error.
- After: fairly useful error.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13622
Differential Revision: https://secure.phabricator.com/D21608
Summary:
Ref T13631. See that task for discussion.
- "NONE": Probably never used?
- "CC": Obsoleted by subscribers.
- "AUDIT_NOT_REQUIRED": For Owners packages, obsoleted by edges.
- "CLOSED": For "Close Audit", obsoleted by "Request Verification".
Test Plan:
- Grepped for constants, browsed Diffusion.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13631
Differential Revision: https://secure.phabricator.com/D21598
Summary:
Ref T13629.
- Allow files to have custom alt text.
- If a file doesn't have alt text, try to generate a plausible default alt text with the information we have.
Test Plan:
- Viewed image files in DocumentEngine diffs, files, `{Fxxx}` embeds, and lightboxes.
- Saw default alt text in all cases, or custom alt text if provided.
- Set, modified, and removed file alt text. Viewed timeline and feed.
- Pulled alt text with "conduit.search".
Maniphest Tasks: T13629
Differential Revision: https://secure.phabricator.com/D21596
Summary:
Ref T13586. Currently, Herald condition logs encode "pass" or "fail" robustly, "forbidden" through a sort of awkward side channel, and can not properly encode "invalid" or "exception" outcomes.
Structure the condition log so results are represented unambiguously and all possible outcomes (pass, fail, forbidden, invalid, exception) are clearly encoded.
Test Plan:
{F8446102}
{F8446103}
Maniphest Tasks: T13586
Differential Revision: https://secure.phabricator.com/D21563
Summary: Ref T13613. Improve the performance of this migration by using a temporary table and an "UPDATE x JOIN y ..." pattern.
Test Plan:
- Ran on `secure`, got exit after a few seconds since the migration is idempotent and changesets already had PHIDs.
- Ran on `secure` with the `continue;` commented out, got valid new PHIDs in 53s (from 153s).
- Tried a larger page size (16K), didn't see any improvement.
- From "--trace", client PHID generation seems to be the limiting factor.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13613
Differential Revision: https://secure.phabricator.com/D21570
Summary:
Ref T13587. D21495 has significant changes to the ngram indexer, which might possibly contain bugs.
Make it easier to reindex a subset of documents (based on the date when the index was built, and/or the software version which generated the index).
This is in addition to the existing versioning, which is focused on object versions.
Test Plan: Ran `bin/search index` with various old and new arguments. Spot-checked the `IndexVersion` table.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13587
Differential Revision: https://secure.phabricator.com/D21560
Summary:
Ref T13605. Changesets currently have no PHID, which limits their ability to use standard API infrastructure.
Give them a PHID, since there's no reason they don't have one other than their age.
Test Plan:
- Ran migrations, saw PHIDs populated.
- Created new changesets, saw PHIDs.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13605
Differential Revision: https://secure.phabricator.com/D21557
Summary: Ref T13602. Similar to subscriber and mention treatments, make it clear when a user doesn't have view permission.
Test Plan: {F8430595}
Maniphest Tasks: T13602
Differential Revision: https://secure.phabricator.com/D21555
Summary:
Ref T13602. When rendering a user hovercard, pass the object on which the reference appears. If the user can't see the object, make it clear on the hovecard.
Restyle the "nopermission" markup in mentions to make it more obvious what the style means: instead of grey text, use red with an explicit icon.
Test Plan: {F8430398}
Maniphest Tasks: T13602
Differential Revision: https://secure.phabricator.com/D21554
Summary:
Ref T13602. Currently, Hovercards are functions only of the object they represent (and the viewer, etc).
Recent changes to how users who can't see an object are rendered motivate making them a function of both the object they represent //and// the context in which they are being viewed. In particular, this enables a hovecard for a user to explain "This user can't see the thing you're lookign at right now.", so visual "exiled" markers can have a path forward toward discovery.
Test Plan:
- This change isn't expected to affect any behavior.
- Viewed hovercards, moused over/out, resized windows, viewed standalone cards, viewed debug cards, saw no behavioral changes.
Maniphest Tasks: T13602
Differential Revision: https://secure.phabricator.com/D21553
Summary:
Ref T13602. When a subscriber can't see an object, it's currently hard to figure it out.
Show this status clearly in the curtain UI.
Test Plan: {F8382865}
Maniphest Tasks: T13602
Differential Revision: https://secure.phabricator.com/D21547
Summary:
Ref T13591. Worker queue tasks which affect commits currently (mostly) store the commit as an "objectPHID", but do not directly reference the repository the commit belongs to.
This can make certain operations (like "change the priority of all tasks affecting repository Y") more difficult than it needs to be.
Support a "containerPHID", similar to the field of the same name on builds, that can store a parent object like a repository and better support operations against subsets of tasks.
See also D11044 for the genesis of "objectPHID".
This depends on the introduction of storage patch phases (in D21529) so that earlier migrations which queue worker tasks don't try to insert this column before it actually exists.
Test Plan:
- Ran `bin/storage upgrade`.
- No callers yet, see further changes for usage.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13591
Differential Revision: https://secure.phabricator.com/D21531
Summary:
Ref T13591. Some storage patches queue worker tasks, currently always to rebuild search indexes.
These patches can not execute in creation order if a later patch modifies the worker task table, since they'll try to perform a modern INSERT against an out-of-date table schema. Such a modification is desirable in the context of T13591, but making it causes these patches to fail.
Patches have an existing "after" mechanism which allows them to have explicit dependencies. This mechanism could be used to resolve this issue, but all patches with a dependency like this would need to be updated every time the queue table changes.
Instead, introduce "phases" to provide broader ordering rules. There are now two phases: "default" and "worker". Patches in the "worker" phase execute after patches in the "default" phase.
Phases may eventually be further separated, but
Test Plan:
- Ran `bin/storage status`, saw patches annotated with phases.
- Will apply `containerPHID` changes on top of this.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13591
Differential Revision: https://secure.phabricator.com/D21529
Summary:
See PHI1900. Recent changes to how commit graphs are drawn made the height automatic in most cases, but it fails in Differential because the element isn't initially visible so the computed height is 0.
Just give them an explicit height so they show up again.
Test Plan: Viewed graphs in Maniphest, Differential, and Diffusion; saw them all render properly.
Differential Revision: https://secure.phabricator.com/D21481
Summary:
See PHI1898. An install is reporting an execution/initialization order issue where this code is reachable before `_inlines` is initialized.
I can't immediately reproduce it, but using "getInlines()" is preferable anyway and seems likely to fix the problem.
Test Plan: Viewed revisions with inlines, added/removed/edited/replied to inlines, didn't find anything broken.
Differential Revision: https://secure.phabricator.com/D21475
Summary:
Ref T13564. See PHI1798. Earlier efforts here (see D21439) still leave us with:
- Incorrect behavior for long URIs, like `http://www.example.com/MMMMM...`.
- Incorrect beahvior for long text blocks, like `MMMMMM...`.
- Undesirable behavior for monospaced text in non-printing contexts (it wraps when we'd prefer it not wrap).
Apply the wrapping rules to all "<td>" content to resolve these three prongs.
Test Plan:
- Viewed long URIs, text blocks, and monospaced text in and out of tables, while printed and not printed, in Safari, Firefox, and Chrome.
- All browser behavior now appears to be correct ("all content is preserved in printed document").
- Some browser behavior when making wrapping choices is questionable, but I can't find an automatic solution for that.
Maniphest Tasks: T13564
Differential Revision: https://secure.phabricator.com/D21472
Summary: Ref T13577. After the fix in D21453, lint identifies additional static errors in Phabricator; fix them.
Test Plan: Ran `arc lint`; these messages are essentially all very obscure.
Subscribers: hach-que, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13577
Differential Revision: https://secure.phabricator.com/D21457
Summary:
Ref T13573. Using the browser "Print" feature on pages produces "Thu, Aug 4, 12:22" timestamps which require context to interpret precisely (they don't have a year and don't have a timezone).
Instead, retain these timestamps in "screen" contexts but use "YYYY-MM-DD HH:MM:SS (UTC+X)" timestamps when printing.
Test Plan: Printed Maniphest tasks and other pages in Safari and Chrome using "?__print__=1" and "Print to PDF", saw absolute timestamps after this chagne in the printed documents.
Maniphest Tasks: T13573
Differential Revision: https://secure.phabricator.com/D21451
Summary: Ref T13552. There are currently some content overflow issues on the graph view where the menu height can exceed the content height and the frame is drawn on a sub-element. Make the frame draw around all the content.
Test Plan: Viewed commit graph history view, saw more sensible UI.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21440
Summary: Ref T13552. Provide a richer handle/status list item for commit lists.
Test Plan: Viewed commits in various interfaces, saw richer information.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21431
Summary:
Ref T13552. Build the "commit list" elements so that the menu action items collapse under the element on mobile.
Also change the mobile breakpoint to 512px because my Safari window can't go any narrower than 508px. Future changes to responsive design will be more content-aware anyway.
Test Plan: Looked at commits in various interfaces, at desktop and mobile widths.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21430
Summary:
Ref T13552. The current layout doesn't work particularly well on desktops or devices.
We have some device/desktop table layout code, but it isn't generic. We also have property list layout code, but it isn't generic either.
Provide generic layout elements ("Fuel", from "Phabricator UI Layout" to "PHUIL"?) and narrowly specialize their display behavior. Then swap the ListItemView stuff to use it.
Test Plan:
Saw slightly better responsive behavior:
{F7637457}
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21418
Summary:
Ref T13552. In unifying the various Graph/List/Table commit views, some information was dropped -- particularly, audit status.
Restore most of it. The result isn't very pretty, but has most of the required information.
Test Plan: {F7637411}
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21417
Summary: Ref T13552. Some of the CSS can be removed or simplified now that essentially all lists of commits are on a single rendering pathway.
Test Plan: Grepped for affected CSS, viewed commit graph.
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21416
Summary:
Ref T13552. This older view mostly duplicates other code and has only two callsites:
- The "Commits" section of user profile pages.
- The "Ambiguous Hash" page when you visit a commit hash page which is an ambiguous prefix of two or more commit hashes.
Replace both with "DiffusionCommitGraphView".
Test Plan:
- Visited profile page, clicked "Commits".
- Visited an ambiguous hash page (`rPbd3c23`).
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21412
Summary: Ref T13552. In the new combined "table/list" graph view, tidy up the graph rendering.
Test Plan: {F7633504}
Maniphest Tasks: T13552
Differential Revision: https://secure.phabricator.com/D21411
Summary:
See T13564. In Chrome only, printing tables with a cell containing an unbroken monospaced text element fails to wrap/break the cell.
Adding "overflow-wrap" appears to fix this without making anything worse. Try this until new problems arise.
Test Plan: Printed such a table to PDF in Chrome, got wrapping with all content visible in the PDF.
Differential Revision: https://secure.phabricator.com/D21439
Summary:
Reverts D21419. See PHI1814. Previously, I used "user-select: all" to group sequences of spaces for selection.
However, this has a side effect: the sequence is now selected with a single click. I didn't read the docuementation on the CSS property thoroughly and missed this in testing, since I was focused on drag-selection behavior.
This behavior is enough of a net negative that I think we're in a worse state overall; revert it.
Test Plan: Straight revert.
Differential Revision: https://secure.phabricator.com/D21429
Summary:
Ref T2495. See PHI1814. Currently, Phabricator replaces tabs with spaces when rendering diffs.
This may or may not be the best behavior in the long term, but it gives us more control over expansion of tabs than using tab literals.
However, one downside is that you can use your mouse cursor to select "half a tab", and can't use your mouse cursor to distinguish between tabs and spaces. Although you probably shouldn't be doing this, this behavior is less accurate/correct than selecting the entire block as a single unit.
A specific correctness issue with this behavior is that the entire block is copied to the clipboard as a tab literal if you select any of it, so two different visual selection ranges can produce the same clipboard content.
This particular behavior can be improved with "user-select: all", to instruct browsers to select the entire element as a single logical element. Now, selecting part of the tab selects the whole thing, as though it were really a tab literal.
(Some future change might abandon this approach and opt to use real tab literals with "tab-size" CSS, but we lose some ability to control alignment behavior if we do that and it doesn't have any obvious advantages over this approach other than cursor selection behavior.)
Test Plan:
- In Safari and Firefox, dragged text to select a whitespace-expanded tab literal. Saw browsers select the whole sequence as though it were a single tab.
- In Chorme, this also mostly works, but there's some glitchiness and flickering. I think this is still a net improvement, it's just not as smooth as Safari and Firefox.
Maniphest Tasks: T2495
Differential Revision: https://secure.phabricator.com/D21419
Summary:
Ref PHI1798. If you put an SSH public key in a table cell with monospaced formatting and then print the table, the cell scrolls and not all of the content appears in your physical printed document.
Generally, the current scrolling behavior for monospaced text seems never-desirable: I can't imagine any cases where we want the table cell to scroll. (There's more of an argument for complex cases where a table cell has, say, an embedded paste.)
Add `line-break: anywhere` to break monospaced text inside these cells.
Test Plan: In Safari, Firefox, and Chrome, viewed a ##|`MMMMM....`|## table. Saw scrolling before and wrapping/breaking after.
Differential Revision: https://secure.phabricator.com/D21370
Summary: See PHI1753. This condition got rewritten for suggested edits and accidentally inverted.
Test Plan:
- Create a comment, type text, save draft, edit comment, cancel.
- Before: comment hides itself.
- After: comment properly cancels into pre-edit draft state.
Differential Revision: https://secure.phabricator.com/D21286
Summary: Ref T13513. When a revision has inlines with edit suggestions, pressing "j" and "k" can incorrectly select the blocks inside the diffs inside the inlines.
Test Plan: Used "j" to cycle through changes in a revision with inline comments with edit suggestions, didn't get jumped into the suggestion diffs.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21283
Summary:
Ref PHI1749. Instead of opening files to the last unchanged line on either side of the change, open files to the "simple" line number of the selected block.
For inlines, this is the inline line number.
For blocks, this is the first new-file line number, or the first old-file line number if no new-file line number exists in the block.
This may not always be what the user is hoping for (we can't know what the state of their working copy is) but should produce more obvious behavior.
Test Plan:
- In Diffusion, used "Open in Editor" with and without line selections. Saw same behavior as before.
- Used "n" and "r" to leave an inline with the keyboard, saw same behavior as before.
- Used "\" and "Open in Editor" menu item to open a file with:
- Nothing selected or changeset selected (line: 1).
- An inline selected (line: inline line).
- A block selected (line: first line in block, per above).
Differential Revision: https://secure.phabricator.com/D21282
Summary: Ref T13276. Ref T13513. All readers and writers were removed more than a year ago; clean up the last remnants of this table.
Test Plan: Grepped for table references, found none.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13513, T13276
Differential Revision: https://secure.phabricator.com/D21281
Summary:
Ref T13513. Syntax highlighting is potentially expensive, and the changeset rendering pipeline can cache it. However, the cache is currently keyed ONLY by Differential changeset ID.
Destroy the existing cache and rebuild it with a more standard cache key so it can be used in a more ad-hoc way by inline suggestion snippets.
Test Plan: Used Darkconsole, saw cache hits and no more inline syntax highlighting for changesets with many inlines.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21280
Summary: Ref T13513. For now, I'm not supporting inline edit suggestions in Diffusion, although it's likely not difficult to do so in the future. Clean up some of the code so that plain ol' inlines work the same way they did before.
Test Plan:
- Created, edited, reloaded, submitted inlines in Diffusion: familiar old behavior.
- Created, edited, reloaded, submitted inlines with suggestions in Differential: familiar new behavior.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21278
Summary: Ref T13513. When rendering an inline suggestion for display, use highlighting and diffing.
Test Plan: {F7495053}
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21277
Summary:
Ref T13513. This still has quite a few rough edges and some significant performance isssues, but appears to mostly work.
Allow reviewers to "Suggest Edit" on an inline comment and provide replacement text for the highlighted source.
Test Plan: Created, edited, reloaded, and submitted inline comments in various states with and without suggestion text.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21276
Summary: Ref T13513. Introduce a formal server-side content state object so the whole state can be saved and restored to the drafts table, read from the request, etc.
Test Plan: Created and edited inlines. Reloaded drafts with edits. Submitted normal and editing comments. Grepped for affected symbols.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21275
Summary:
Ref T13513. Currently, all the inline code passes around strings to describe content. I plan to add background music, animation effects, etc., soon. To prepare for this change, make content a state object.
This does not change any user-visible behavior, it just prepares for content to become more complicated than a single string.
Test Plan: Created, edited, submitted, cancelled, etc., comments.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21273
Summary: Ref T13513. The code which added "r" and "R" to the inline menu accidentally discarded the difference between the keystrokes.
Test Plan:
- Clicked an inline, pressed "r", got new empty inline (previously: inline with quote).
- Clicked an inline, pressed "R", got a new quoted inline.
- Repeated steps with the menu items, got the expected behaviors.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21268
Summary: Ref T13513. On `secure`, I caught an issue where inlines may be accessed directly before they're constructed. Instead, access them through the relevant accessor.
Test Plan: Will deploy.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21263
Summary:
Ref T13513. The on-hover-inline reticle has switched over to have cell-based behavior. Switch the on-hover-line-number reticle to use the same behavior.
Also, clean up the dirty/redraw loop slightly: we no longer need to dirty on resize, and we don't need to redraw if the range isn't actually dirty.
Test Plan: Highlighted lines and line ranges. Hovered over inlines.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21262
Summary:
Ref T13513. See PHI1734, which raises a concern about the performance of large revisions near the 100-change threshold.
Currently, `getInlines()` is called whenever the scroll position transitions between two changesets, and it performs a relatively complicated DOM scan to lift inlines out of the document.
This shows up as taking a small but nontrivial amount of time in Firefox profiles and should be safely memoizable.
Test Plan:
- Under Firefox profiling, scrolled through a large revision.
- Before change: `getInlines()` appeared as the highest-cost thing we're explicitly doing on profiles.
- After change: `getInlines()` was no longer meaningfully represented on profiles.
- Created inlines, edited inlines, etc. Didn't identify any broken behavior.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21261
Summary:
Ref T13513. The way I'm highlighting lines won't work for Jupyter notebooks or other complex content blocks, and I don't see an obvious way to make it work that's reasonably robust.
However, we can just ignore the range behavior for complex content and treat the entire block as selected. This isn't quite as fancy as the source behavior, but pretty good.
Also, adjust unified diff behavior to work correctly with highlighting and range selection.
Test Plan:
- Used range selection in a Jupyter notebook, got reasonable behavior (range is treated as "entire block").
- Used range selection in a unified diff, got equivalent behavior to 2-up diffs.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21257
Summary:
Ref T13513. Give selected inlines a selection state and visual cues which are similar to the changeset selection state.
Also fix a couple of minor issues with select interactions and offset comments.
Test Plan: Selected inlines, saw obvious visual cues.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21256
Summary: Ref T13513. Currently, clicking inline or changeset headers eats the click events. This doesn't serve any clear purpose, and means these clicks do not clear text selections from the document, which is unusual.
Test Plan:
- Selected some text in a diff.
- Clicked a changeset header to select it.
- Before patch: text selection and context menu were retained.
- After patch: text selection was cleared and context menu was dismissed.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21255
Summary:
Ref T13513. In Safari, do this:
- view a 2-up diff with content on both sides;
- select more than one line on the right side; and
- use your mouse to click "New Inline Comment" in the context menu that pops up.
The mousedown event for the "New Inline Comment" click removes the "copy selection" behavior and creates a flash where both sides of the diff are selected.
This doesn't happen with (most) normal clicks because mouse down on a non-grabbable element clears the document selection.
To avoid this, don't reset the copy selection behavior if the user mouses down on an "<a />". This might not be robust, but seems simple and plausible as a fix.
Test Plan:
- See above.
- Before patch: flash of overbroad selection when clicking "New Inline Comment".
- After patch: no selection flash.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21254
Summary: Ref T13513. This fixes a bug where clicking a line number, then clicking "Cancel" causes the paths panel to briefly update with an extra inline comment counted on the file.
Test Plan:
- Clicked a line number.
- Typed some text.
- Clicked "Cancel".
- Before patch: paths panel flashes "1".
- After patch: paths panel stays stable.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21253
Summary:
Ref T13513. Currently, when creating an inline by selecting a line range, slightly careless handling leads to an inline with "0" offsets (by passing "undefined" to the server). This causes the block to highlight every line except the last one as fully bright, which is incorrect.
An inline with "0" offsets and an inline with no offsets are different. Be more careful about passing offsets around and rendering them.
Test Plan:
- Used the line numbers to add an inline to lines 4-8 of a change.
- Hovered the inline.
- Saw all four lines marked as "dull"-highlighted (previously: three bright lines, one dull line).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21252
Summary:
Ref T13513. When a user selects a text range and uses "New Inline Comment" to create a comment directly from a range, store the offset information alongside the comment.
When hovering the comment, highlight the original range.
Test Plan: {F7480926, size=full}
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21250
Summary:
Ref T13513.
- Firefox represents multiple selected rows as a discontinuous range. Accommodate this.
- Unified diffs don't have a "copy" marker. Do something sort-of-reasonable for them.
Test Plan:
- Selected multiple lines of content in Firefox, got an option to add a comment.
- Selected content in unified mode, got an option to add a comment.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21249
Summary: Ref T13513. Support direct text selection for inlines. This is currently just an alternate way to get to the same place as using line numbers, but can preserve offset/range information in the future.
Test Plan:
- Selected some text, hit "c", clicked "New Inline Comment", got sensible comments on both sides of a diff in Safari, Chrome, and (with limitations) Firefox.
- Caveats: no unified support, doesn't work across lines in Firefox.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21248
Summary: Ref T11401. Ref T13513. This paves the way for more comment actions, particularly an edit-after-submit action.
Test Plan: Took all actions from menus, via mouse and via keyboard (where applicable).
Maniphest Tasks: T13513, T11401
Differential Revision: https://secure.phabricator.com/D21244
Summary: See <https://github.com/phacility/phabricator/pull/854>. In some situations, `line-break: anywhere` produces better behavior than `word-break: break-all`. It never appears to produce worse behavior.
Test Plan:
- Break behavior changes if a line contains "<span />" elements caused by syntax highlighting. This CSS adjustment only appears to apply to text with internal "<span />" elements.
- This specifically impacts certain internal breakpoints adjacent to punctuation, so the test case is highly specific. Generic test cases with latin word characters do not evidence any behavioral changes.
- This change appears to have no impact on Safari, which uses the better behavior in all cases.
- Before Patch: In Firefox and Chrome, this specific change breaks awkwardly. There is more room for text to fit on the broken line:
Firefox
{F7480567}
Chrome
{F7480568}
- After Patch: Firefox and Chrome break the line better. Here's Firefox:
{F7480569}
- Additional context:
Safari Behavior (Unchanged)
{F7480570}
Chrome with no highlighting (desirable behavior). Firefox does the same thing.
{F7480571}
Also tested other cases, which seem never-worse in any browser.
{F7480574}
Differential Revision: https://secure.phabricator.com/D21247
Summary:
Ref T13513. Currently, "View as Document Type..." lists every available engine.
This is hard to get completely right because we can't always rebuild the document ref accurately in the endpoint, but try harder to fake something reasonable.
Test Plan: Used "View as Document Type..." on Jupyter notebooks, was given "Jupyter" and "Source" as options.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21241
Summary:
Ref T13513. As part of inline metadata, save the document engine the change is being rendered with.
This will allow other parts of the UI to detect that an inline was created on a Jupyter notebook but is being rendered on raw source, or whatever else.
The immediate goal is to fix nonsensical inline snippet rendering in email on Jupyter notebooks.
Test Plan:
- Created inlines and replies on normal soure code, saw no document engine annotated in the database.
- Created inlines and replies on a Jupyter notebook rendered in Jupyter mode, saw "jupyter" annotations in the database.
- Swapped document engines between Jupyter and Source, etc.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21240
Summary: Ref T13513. Currently, if you're editing a comment, "delete" doesn't put the comment into the correct state. This action is normally only reachable from comment previews, since an editing inline has no "delete" button.
Test Plan:
- Started editing an inline, clicked "Delete", got a deletion.
- Created an inline, typed text,
- Deleted a normal comment via preview.
- Deleted a normal comment via the on-inline action.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21238
Summary:
Ref T13513. Currently, clicking "View" from the inline comment preview (below the "add comment" area at the bottom of the page) only works if the inline isn't being edited.
Update this behavior so it works on inlines in either "Viewing" or "Editing" states.
Test Plan:
- Clicked "View" on a normal inline, got jumped/selected.
- Clicked "View" on an editing inline, got jumped/selected.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21237
Summary:
Ref T13513. Currently:
- If you click the "Show Changeset" button, your state change doesn't actually get saved on the server.
- It's hard to select a changeset path name for copy/paste because the "highlight the header" code tends to eat the event.
Instead: persist the former event; make the actual path text not be part of the highlight hitbox.
Test Plan:
- Clicked "Show Changeset", reloaded, saw changeset visibility persisted.
- Selected changeset path text without issues.
- Clicked non-text header area to select/deselect changesets.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21236
Summary:
Ref T13513. Currently, inline storage objects ("TransactionComment") can't directly generate a runtime object ("InlineComment").
Allow this transformation to be performed in a genric way so clunky code which does it per-object-type can be removed, lifted, or simplified.
Simplify an especially gross callsite in preview code.
Test Plan: Previewed inline comments.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21226
Summary: See D21213. If there's no matching element, `findAbove()` throws. Handle these cases correctly.
Test Plan: Visited `#toc` on a revision, no longer saw a JS error.
Differential Revision: https://secure.phabricator.com/D21222
Summary:
Ref T13513. Overloading "original text" to get "edit-on-load" comments into the right state has some undesirable side effects.
Instead, provide the text when the editor opens. This fixes a cancel interaction.
Test Plan:
- Create an inline, type text, don't save.
- Reload page.
- Cancel.
- Before: cancelled into empty state.
- After: cancelled into deleted+undo state.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21219
Summary:
Ref T13513. This is a bit clumsy, but the cleanest way to implement "isEditing" inlines today is to send them down as normal inlines and then simulate clicking "edit" on them.
When we do, don't focus the resulting editor: focusing it makes the page scroll around and highlight things in essentially random order as the editors load in.
Test Plan: Reloaded a page with some open editors, wasn't scrolled to them.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21217
Summary:
Ref T13513. As users type text into inline comments, save the comment state as a draft on the server.
This has some rough edges, particularly around previews, but mostly works. See T13513 for notes.
Test Plan: Started an inline, typed some text, waited a second, reloaded the page, saw an editing inline with the saved text.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21216
Summary: Ref T13513. Refine some inline behaviors, see test plan.
Test Plan:
- Edit a comment ("A"), type text ("AB"), cancel, edit.
- Old behavior: edit and undo states (wrong, and undo does not function).
- New behavior: edit state only.
- Edit a comment ("A"), type text ("AB"), cancel. Undo ("AB"), cancel. Edit.
- Old behavior: "AB" (wrong: you never submitted this text).
- New behavior: "A".
- Create a comment, type text, cancel.
- Old behavior: counter appears in filetree (wrong, comment is undo-able but should not be counted).
- New behavior: no counter.
- Cancel editing an empty comment with no text.
- Old behavior: Something buggy -- undo, I think?
- New behavior: it just vanishes (correct behavior).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21212
Summary: Ref T13513. This slightly expands the existing-but-hacky "warning" workflow to cover both "mentions on draft" and "submitting inlines being edited".
Test Plan:
- Submitted changes to a revision with mentions on a draft, inlines being edited, both, and neither.
- Got sensible warnings in the cases where warnings were appropriate.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21191
Summary:
Ref T13513. Now that the "currently being edited" state of inlines is saved on the server side, clear the flag when the user clicks "Cancel" to leave the "editing" state on the client.
This also serves to delete empty comments.
Test Plan:
- Clicked a line number to create a new comment. Then:
- Clicked "Cancel". Reloaded page, saw no more comment.
- Typed text, saved. Reloaded page, saw non-editing draft. Clicked "Edit", reloaded page, saw editing draft. Clicked "Cancel", reloaded page, saw non-editing draft.
- Typed text, saved. Clicked "Edit", deleted text, saved. Reloaded page, saw no more comment.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21187
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
Summary: Ref T13513. This plans for "currently editing", character range comments, code suggestions, document engine tracking. And absolutely nothing else.
Test Plan:
- Ran `bin/storage upgrade -f`, got a clean upgrade.
- Created and submitted some inline comments; nothing exploded.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21184
Summary:
At some point, the highlighting behavior for the timeline broke. When you follow a link to a particular timeline story, the story should be highlighted.
Prior to this change, the `<a />` tag itself highlights, but there's no associated CSS and it's too deep in the tree to do anything useful.
(Since this change is fairly straightforward, I gave up digging for the root cause before finding it.)
Test Plan:
- Clicked a timeline story anchor, saw the story highlight.
Differential Revision: https://secure.phabricator.com/D21213
