Summary:
Ref T4209. Unifies the local (`./bin/phd status`) and global (`./bin/phd status --all`) view into a single table. This generally makes it easy to administer daemons running across multiple hosts.
Depends on D9606.
Test Plan:
```
> sudo ./bin/phd status
ID Host PID Started Daemon Arguments
38 localhost 2282 Jun 18 2014, 7:52:56 AM PhabricatorRepositoryPullLocalDaemon
39 localhost 2289 Jun 18 2014, 7:52:57 AM PhabricatorGarbageCollectorDaemon
40 localhost 2294 Jun 18 2014, 7:52:57 AM PhabricatorTaskmasterDaemon
41 localhost 2314 Jun 18 2014, 7:52:58 AM PhabricatorTaskmasterDaemon
42 localhost 2319 Jun 18 2014, 7:52:59 AM PhabricatorTaskmasterDaemon
43 localhost 2328 Jun 18 2014, 7:53:00 AM PhabricatorTaskmasterDaemon
44 localhost 2354 Jun 18 2014, 7:53:08 AM PhabricatorRepositoryPullLocalDaemon X --not Y
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D9607
Summary: Ref T4209. Currently, `./bin/phd status` prints a table showing the daemons that are executing on the current host. It would be useful to be able to conventiently query the daemons running across all hosts. This would also (theoretically) make it possible to conditionally start daemons on a host depending upon the current state and on the daemons running on other hosts.
Test Plan:
```
> ./bin/phd status --all
ID Host PID Started Daemon Arguments
18 phabricator 6969 Jun 12 2014, 4:44:22 PM PhabricatorTaskmasterDaemon
17 phabricator 6961 Jun 12 2014, 4:44:19 PM PhabricatorTaskmasterDaemon
16 phabricator 6955 Jun 12 2014, 4:44:15 PM PhabricatorTaskmasterDaemon
15 phabricator 6950 Jun 12 2014, 4:44:14 PM PhabricatorTaskmasterDaemon
14 phabricator 6936 Jun 12 2014, 4:44:13 PM PhabricatorGarbageCollectorDaemon
13 phabricator 6931 Jun 12 2014, 4:44:12 PM PhabricatorRepositoryPullLocalDaemon
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4209
Differential Revision: https://secure.phabricator.com/D9497
Summary: This class has been deprecated for a while now (see rP0a8b0d1392bd79b4e88fbf910b176c960d57b4b4). It should be safe to remove.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9467
Summary: This class has been deprecated for a while now (see rPdad7c65bf56384480be7c18e02fdc01ea67cf1ff). It should be safe to remove.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9468
Summary: This class has been deprecated for a while (see rP574bc3ba31cca2767bafe7844d7f854d90d6be1c). It should be safe to remove now.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9469
Summary: Applied some more linter fixes that I previously missed because my global `arc` install was out-of-date.
Test Plan: Will run `arc unit` on another host.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9443
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: Fixes T4735. When running `./bin/phd`, show daemon arguments.
Test Plan:
```
./bin/phd status
PID Started Daemon Arguments
12711 May 20 2014, 9:02:52 AM PhabricatorRepositoryPullLocalDaemon []
12716 May 20 2014, 9:02:52 AM PhabricatorGarbageCollectorDaemon []
12733 May 20 2014, 9:02:53 AM PhabricatorTaskmasterDaemon []
12768 May 20 2014, 9:02:53 AM PhabricatorTaskmasterDaemon []
12775 May 20 2014, 9:02:53 AM PhabricatorTaskmasterDaemon []
12780 May 20 2014, 9:02:54 AM PhabricatorTaskmasterDaemon []
12838 May 20 2014, 9:02:54 AM PhabricatorFactDaemon []
13436 May 20 2014, 9:03:23 AM PhabricatorRepositoryPullLocalDaemon ["X","--not","Y"]
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T4735
Differential Revision: https://secure.phabricator.com/D9208
Summary: Someone stole my bot's name, so the bot couldn't (re)connect. This tries adding some text to the name if it encounters a 433 'nick in use' error
Test Plan: Started a ton of bots: F154744
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9123
Summary: Ref D8930. My "send test" for SMS was failing before this patch, and now it works nicely.
Test Plan: Used new code in D8930 that uses $this->queueTask() to get some work done and it got done in process
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9018
Summary:
For Harbormaster tasks which want to poll or wait, this lets them say "try again a little later" without having to sleep and hold a queue slot.
This is basically the same as failing, except that we don't increment the failure counter. Instead, we just set the current lease to the correct length and then exit. The task will be retried after the lease expires.
Test Plan: Using both `bin/harbormaster` and `phd debug taskmaster`, ran a lot of waiting tasks through the queue, faking them to either yield or not yield in a controlled manner. The queue responded as expected, yielding tasks appropraitely and retrying them later.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8792
Summary:
See discussion in D8773. Three small adjustments which should help prevent this kind of issue:
- When queueing followup tasks, hold them on the worker until we finish the task, then queue them only if the work was successful.
- Increase the default lease time from 60 seconds to 2 hours. Although most tasks finish in far fewer than 60 seconds, the daemons are generally stable nowadays and these short leases don't serve much of a purpose. I think they also date from an era where lease expiry and failure were less clearly distinguished.
- Increase the default wait-after-failure from 60 seconds to 5 minutes. This largely dates from the MetaMTA era, where Facebook ran services with high failure rates and it was appropriate to repeatedly hammer them until things went through. In modern infrastructure, such failures are rare.
Test Plan:
- Verified that tasks queued properly after the main task was updated.
- Verified that leases default to 7200 seconds.
- Intentionally failed a task and verified default 300 second wait before retry.
- Removed all default leases shorter than 7200 seconds (there was only one).
- Checked all the wait before retry implementations for anything much shorter than 5 minutes (they all seem reasonable).
Reviewers: btrahan, sowedance
Reviewed By: sowedance
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8774
Summary:
There are quite a few tests in Arcanist, libphutil and Phabricator that do something similar to `$this->assertEqual(false, ...)` or `$this->assertEqual(true, ...)`.
This is unnecessarily verbose and it would be cleaner if we had `assertFalse` and `assertTrue` methods.
Test Plan: I contemplated adding a unit test for the `getCallerInfo` method but wasn't sure if it was required / where it should live.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8460
Summary: Adds support for custom SSL certs in the IRC bot config, same as in .arcconfig
Test Plan: Bot wouldn't connect before. Added this code and corresponding line in bot config, now it does.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D8393
Summary: `What's new` has been broken for awhile, I've updated it to use the `feed.query` text view.
Test Plan: Start up a bot and say "What's new?"
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: fas, epriestley, aran, Kage, demo
Differential Revision: https://secure.phabricator.com/D8118
Summary: This modularizes the rest of the GC submethods. Turned out there was nothing tricky.
Test Plan: Ran `bin/phd debug garbage` and got reasonable looking behavior and output.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7971
Summary:
The GC is a big block of hard-coded application GCs right now. Among other things, this means third parties can't tap into the infrastructure.
Modularize it into `GarbageCollector` classes. This implements only one to prove the new stuff works; I'll followup with the rest in the next diff or few depending on how much mess I run into.
Test Plan: Used `bin/phd debug garbage` to run the collector in debug mode, observed reasonable output and behavior.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7970
Summary:
Ref T2015. Currently, Drydock has a `wait-for-lease` workflow which is invoked in the background by the `lease` workflow.
The goal of this mechanism is to allow `bin/drydock lease` to print out logs as the lease is acquired. However, this predates the `runAllTasksInProcess` flags, and they provide a simpler and more robust way (potentially with `--trace` and `PhutilConsole`) to do synchronous execution and debug logging.
Simplify this whole mechanism: just run everything in-process in `bin/drydock lease`, and do logging via `--trace`. We could thread a `PhutilConsole` through things too, but this seems good enough for now.
Also various cleanup/etc.
Test Plan: Ran `bin/drydock lease`. Ran `bin/harbormaster build X --plan Y`, for `Y` being a Drydock-dependent build plan.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7835
Summary:
Fixes two issues:
- When rendering a task's details, we currently issue a policy-oblivious query. Instead, issue a policy-aware query.
- The formatting is a little bit weird, with the top half in a box and the bottom half with an older style. Make them consistent.
Test Plan: Looked at the detail pages for several tasks in queue.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7812
Summary:
Ref T1049. See discussion in D7745. We have some specific interest in this for D7745, but generally we want to consume tasks with expired leases in roughly FIFO order, just like we consume new tasks in roughly FIFO order. Currently, when we select an expired task we order them by `id`, but this is the original insert order, not lease expiration order. Instead, order by `leaseExpires`.
This query is actually much better than the old one was, since the WHERE part is `leaseExpries < VALUE`.
Test Plan: Ran `EXPLAIN` on the query. Ran a taskmaster in debug mode and saw it lease new and expired tasks successfully.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7746
Summary:
Ref T2230. When fully set up, we have up to three users who all need to write into the repositories:
- The webserver needs to write for HTTP receives.
- The SSH user needs to write for SSH receives.
- The daemons need to write for "git fetch", "git clone", etc.
These three users don't need to be different, but in practice they are often not likely to all be the same user. If for no other reason, making them all the same user requires you to "git clone httpd@host.com", and installs are likely to prefer "git clone git@host.com".
Using three different users also allows better privilege separation. Particularly, the daemon user can be the //only// user with write access to the repositories. The webserver and SSH user can accomplish their writes through `sudo`, with a whitelisted set of commands. This means that even if you compromise the `ssh` user, you need to find a way to escallate from there to the daemon user in order to, e.g., write arbitrary stuff into the repository or bypass commit hooks.
This lays some of the groundwork for a highly-separated configuration where the SSH and HTTP users have the fewest privileges possible and use `sudo` to interact with repositories. Some future work which might make sense:
- Make `bin/phd` respect this (require start as the right user, or as root and drop privileges, if this configuration is set).
- Execute all `git/hg/svn` commands via sudo?
Users aren't expected to configure this yet so I haven't written any documentation.
Test Plan:
Added an SSH user ("dweller") and gave it sudo by adding this to `/etc/sudoers`:
dweller ALL=(epriestley) SETENV: NOPASSWD: /usr/bin/git-upload-pack, /usr/bin/git-receive-pack
Then I ran git pushes and pulls over SSH via "dweller@localhost". They successfully interacted with the repository on disk as the "epriestley" user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7589
Summary: Ref T603. Move to real Query classes.
Test Plan:
- Ran `phd debug pull X` (where `X` does not match a repository).
- Ran `phd debug pull Y` (where `Y` does match a repository).
- Ran `phd debug pull`.
- Ran `repository pull`.
- Ran `repository pull X`.
- Ran `repository pull Y`.
- Ran `repository discover`.
- Ran `repository delete`.
- Ran `grep`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7137
Summary:
Previously, if there were no macros, we would ping conduit for a list of macros until we got something. Now we cache false when there are no results.
T3045
Test Plan: Ensure the init doesn't call the ##macro.query## conduit method more than once during the PhabricatorBot's lifetime.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Maniphest Tasks: T3045
Differential Revision: https://secure.phabricator.com/D6671
Summary: Fixes T3610. This got un-scoped at some point, and is only used in Drydock so it escaped notice.
Test Plan: Ran `bin/drydock lease --type host` without hitting an exception about incorrect query construction.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3610
Differential Revision: https://secure.phabricator.com/D6552
Summary: Fixes T3557. One thing which made T3557 kind of a mess was the lack of information about progress through temporary failures. Add a column which records a task's last failure time, and surface it in the console.
Test Plan: {F51277}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3557
Differential Revision: https://secure.phabricator.com/D6550
Summary: Fixes T2569. This is the other common exception source which is ambiguous. List the task ID explicitly to make debugging easier.
Test Plan: {F51268}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2569
Differential Revision: https://secure.phabricator.com/D6549
Summary:
Ref T3557. This stuff does a bunch of nonsense in the View right now. Instead, do it in a real Query class.
Fixes a long-standing bug which prevented "all daemons" from showing more than 3 days' worth of data.
Test Plan: Viewed `/daemon/`, viewed "All Daemons".
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3557
Differential Revision: https://secure.phabricator.com/D6544
Summary: Ref T1670. Use events and direct database writes instead of Conduit. Deprecate the Conduit methods.
Test Plan: Ran daemons, used the console to review daemon event logs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1670
Differential Revision: https://secure.phabricator.com/D6536
Summary:
Ref T1670. Mostly, use PhutilArgumentParser. This breaks up the mismash of functional stuff and PhabriatorDaemonControl into proper argumentparser Workflows.
There are no functional changes, except that I removed the "pingConduit()" call prior to starting daemons, because I intend to remove all Conduit integration.
Test Plan:
- Ran `phd list`.
- Ran `phd status` (running daemons).
- Ran `phd status` (no running daemons).
- Ran `phd stop <pid>` (dead task).
- Ran `phd stop <pid>` (live task).
- Ran `phd stop zebra` (invalid PID).
- Ran `phd stop 1` (bad PID).
- Ran `phd stop`.
- Ran `phd debug zebra` (no match).
- Ran `phd debug e` (ambiguous).
- Ran `phd debug task`.
- Ran `phd launch task`.
- Ran `phd launch 0 task` (invalid arg).
- Ran `phd launch 2 task`.
- Ran `phd help`.
- Ran `phd help list`.
- Ran `phd start`.
- Ran `phd restart`.
- Looked at Repositories (daemon running).
- Looked at Repositories (daemon not running).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1670
Differential Revision: https://secure.phabricator.com/D6490
Summary: Ref T2852. When a Differential revision is linked to an Asana task, show the related task in Differential.
Test Plan: {F49234}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6387
Summary:
Ref T2852. Asana sync tasks currently have a standard retry/backoff schedule, but the defaults are quite aggressive (retry every 60s forever). Instead, retry at increasing intervals and stop retrying after a few tries.
- Retry at intervals and stop retrying after a few iterations.
- Modernize some interfaces.
- Add better information about retry behaviors to the web UI.
Test Plan: {F49194}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6381
Summary:
- Add GC support to conduit logs.
- Add Query support to conduit logs.
- Record the actual user PHID.
- Show client name.
- Support querying by specific method, so I can link to this from a setup issue.
@wez, this migration may not be fast. It took about 8 seconds for me to migrate 800,000 rows in the `conduit_methodcalllog` table. This adds a GC which should keep the table at a more manageable size in the future.
You can safely delete all data older than 30 days from this table, although you should do it by `id` instead of `dateCreated` since there's no key on `dateCreated` until this patch.
Test Plan:
- Ran GC.
- Looked at log UI.
- Ran Conduit methods.
Reviewers: btrahan
Reviewed By: btrahan
CC: wez, aran
Differential Revision: https://secure.phabricator.com/D6332
Summary:
Ref T2852. Add a `log()` method to `PhabricatorWorker` to make debugging easier.
I renamed the similar Drydock-specific method.
Test Plan:
Used logging in a future revision:
...
<<< [36] <http> 211,704 us
Updating main task.
>>> [37] <http> https://app.asana.com/api/1.0/tasks/6153776820388
...
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6296
Summary:
Ref T2852. I want to model Asana integration as a response to feed events. Currently, we queue one feed event for each HTTP hook.
Instead, always queue one feed event and then have it queue any necessary followup events (now, http hooks; soon, asana).
Add a script to make it easy to reproducibly fire feed event publishing.
Test Plan:
Republished a feed event and verified it hit configured HTTP hooks correctly.
$ ./bin/feed republish 5765774156541908292 --trace
>>> [2] <connect> phabricator2_feed
<<< [2] <connect> 1,660 us
>>> [3] <query> SELECT story.* FROM `feed_storydata` story JOIN `feed_storyreference` ref ON ref.chronologicalKey = story.chronologicalKey WHERE (ref.chronologicalKey IN (5765774156541908292)) GROUP BY story.chronologicalKey ORDER BY story.chronologicalKey DESC
<<< [3] <query> 595 us
>>> [4] <connect> phabricator2_differential
<<< [4] <connect> 760 us
>>> [5] <query> SELECT * FROM `differential_revision` WHERE phid IN ('PHID-DREV-ywqmrj5zgkdloqh5p3c5')
<<< [5] <query> 478 us
>>> [6] <query> SELECT * FROM `differential_revision` WHERE phid IN ('PHID-DREV-ywqmrj5zgkdloqh5p3c5')
<<< [6] <query> 449 us
>>> [7] <connect> phabricator2_user
<<< [7] <connect> 1,062 us
>>> [8] <query> SELECT * FROM `user` WHERE phid in ('PHID-USER-lqiz3yd7wmk64ejugvov')
<<< [8] <query> 540 us
>>> [9] <connect> phabricator2_file
<<< [9] <connect> 951 us
>>> [10] <query> SELECT * FROM `file` WHERE phid IN ('PHID-FILE-gq6dlsysvxbn3dgwvky7')
<<< [10] <query> 498 us
>>> [11] <query> SELECT * FROM `user_status` WHERE userPHID IN ('PHID-USER-lqiz3yd7wmk64ejugvov') AND UNIX_TIMESTAMP() BETWEEN dateFrom AND dateTo
<<< [11] <query> 507 us
Republishing story...
>>> [12] <query> SELECT story.* FROM `feed_storydata` story JOIN `feed_storyreference` ref ON ref.chronologicalKey = story.chronologicalKey WHERE (ref.chronologicalKey IN (5765774156541908292)) GROUP BY story.chronologicalKey ORDER BY story.chronologicalKey DESC
<<< [12] <query> 685 us
>>> [13] <query> SELECT * FROM `differential_revision` WHERE phid IN ('PHID-DREV-ywqmrj5zgkdloqh5p3c5')
<<< [13] <query> 489 us
>>> [14] <query> SELECT * FROM `differential_revision` WHERE phid IN ('PHID-DREV-ywqmrj5zgkdloqh5p3c5')
<<< [14] <query> 512 us
>>> [15] <query> SELECT * FROM `user` WHERE phid in ('PHID-USER-lqiz3yd7wmk64ejugvov')
<<< [15] <query> 601 us
>>> [16] <query> SELECT * FROM `file` WHERE phid IN ('PHID-FILE-gq6dlsysvxbn3dgwvky7')
<<< [16] <query> 405 us
>>> [17] <query> SELECT * FROM `user_status` WHERE userPHID IN ('PHID-USER-lqiz3yd7wmk64ejugvov') AND UNIX_TIMESTAMP() BETWEEN dateFrom AND dateTo
<<< [17] <query> 551 us
>>> [18] <query> SELECT story.* FROM `feed_storydata` story JOIN `feed_storyreference` ref ON ref.chronologicalKey = story.chronologicalKey WHERE (ref.chronologicalKey IN (5765774156541908292)) GROUP BY story.chronologicalKey ORDER BY story.chronologicalKey DESC
<<< [18] <query> 507 us
>>> [19] <query> SELECT * FROM `differential_revision` WHERE phid IN ('PHID-DREV-ywqmrj5zgkdloqh5p3c5')
<<< [19] <query> 428 us
>>> [20] <query> SELECT * FROM `differential_revision` WHERE phid IN ('PHID-DREV-ywqmrj5zgkdloqh5p3c5')
<<< [20] <query> 419 us
>>> [21] <query> SELECT * FROM `user` WHERE phid in ('PHID-USER-lqiz3yd7wmk64ejugvov')
<<< [21] <query> 591 us
>>> [22] <query> SELECT * FROM `file` WHERE phid IN ('PHID-FILE-gq6dlsysvxbn3dgwvky7')
<<< [22] <query> 406 us
>>> [23] <query> SELECT * FROM `user_status` WHERE userPHID IN ('PHID-USER-lqiz3yd7wmk64ejugvov') AND UNIX_TIMESTAMP() BETWEEN dateFrom AND dateTo
<<< [23] <query> 593 us
>>> [24] <http> http://127.0.0.1/derp/
<<< [24] <http> 746,157 us
[2013-06-24 20:23:26] EXCEPTION: (HTTPFutureResponseStatusHTTP) [HTTP/500] Internal Server Error
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6291
Summary: Fixes T2933
Test Plan:
As guided by Evan - by setting $tasks = array(); in PhabricatorTaskmasterDaemon.php
and running 'phd debug taskmaster' and 'show full processlist' on mysql as root. No extra connections
detected.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2933
Differential Revision: https://secure.phabricator.com/D5654
Summary: MySQL is not able to use indexes with searching for tuples.
Test Plan:
Explained the query before and after, saw `key_len` 16 instead of 8.
Also saw time 0.0 s instead of 2.9 s (but that was probably caused by warming up).
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5580
Summary: Dump everything to the debug log for `phd debug phabricatorbot ...`
Test Plan: Ran `phd debug phabricatorbot ...`
Reviewers: chad, AnhNhan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5239
Summary: Fixes T2651. This could be futher generalized but it's a bit out of the way.
Test Plan: See chatlog.
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2651
Differential Revision: https://secure.phabricator.com/D5236
Summary: Added ttl field to files. Gabage collect files with expired ttl
Test Plan: created file with a ttl. Let garbage collector run
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4987
Summary:
PhabricatorBotMessage->getSender returns a PhabricatorBotUser object (which potentially can be null)
So check null and then use getName to get actual name of the sender
Test Plan: Run phabot and add myself to ignore list
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5036
Summary: Mostly applies a new call spacing rule; also a few things that have slipped through via pull requests and such
Test Plan: `find src/ -type f -name '*.php' | xargs -n16 arc lint --output summary --apply-patches`
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5002
Summary: We currently garbage collect general cache entries after a set period of time (30 days by default), but the recent changes to DarkConsole have left us writing a lot of large, short-TTL data to the cache. In addition to a maximum age, GC cache entires after they TTL out.
Test Plan: Ran GC daemon, saw TTL'd entries get collected. Inserted a TTL'd entry, saw it get collected by GC. Saw non-ttl'd entries not get collected.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4990
Summary: First pass. Flowdock supports interesting message types (like replies to messages), but for now implementing a standard messaging interface.
Test Plan: Ran both a Flowdock bot and a Campfire bot. Made sure both still connected and responded properly to the Object Handler.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4983
Summary:
Clearly silly to have a separate handler for this. I also made most of the protocol stuff direct writes so we don't need to ship them through handlers, and made the adapter ignore message it does not understand by default instead of sending them to IRC, and added PASTE "support".
We could still let handlers react to these messages by emitting them all as 'RAWIRC' or similar, but there's currently no need for that so I didn't bother.
Also fix an issue in D4924 with nickpass.
Test Plan: Had bot join IRC, talked to it.
Reviewers: indiefan
Reviewed By: indiefan
CC: aran
Differential Revision: https://secure.phabricator.com/D4925
Summary:
Make users/channels/rooms into objects, so we can later sort out stuff like Campfire user IDs, Phabricator vs chat accounts, etc.
The only change here is that I removed output buffering from the macro handler. We should move throttling/buffering to adapters instead and have it apply globally.
Test Plan: Ran IRC and Campfire bots and interacted with them.
Reviewers: indiefan
Reviewed By: indiefan
CC: aran
Differential Revision: https://secure.phabricator.com/D4924
Summary:
- Reduce visibiliy of config.
- Add a typehint.
Test Plan: Ran campfire/irc bots and chatted with them.
Reviewers: indiefan
Reviewed By: indiefan
CC: aran, amerigomasini
Differential Revision: https://secure.phabricator.com/D4923
Test Plan: Ran the bot with a handler that sends sound commands.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4922
Summary: Also added sender to the campfire adapter. This isn't extremely useful as it's just a numeric id, but it allows us to add ignores (specifically having the bot ignore itself).
Test Plan: Ran the bot, ignored itself.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4893
Summary:
- Use PhutilURI to correct for specifying "https://yourname.campfire.com/" instead of "https://yourname.campfire.com".
- Use HTTPSFuture to get logging via `--trace` and error detection (CA stuff should be OK since 37signals has real certs).
- On destruction, only try to leave rooms we've actually joined.
Test Plan: Setup a bot, had it join a room, talked to it.
Reviewers: indiefan
Reviewed By: indiefan
CC: aran
Differential Revision: https://secure.phabricator.com/D4849
Summary:
Decided the best approach for refactoring the message/command stuff would be to actually start implementing the campfire adapter to get a better idea of what the abstractions should look like. It feels awkward and unwieldy trying to maintain the irc command interface (notice the message instantiation in the `processReadBuffer()` method. However, i'm still not clear what the best approach is without requiring a re-write of nearly all the existing handlers and defining essentially a custom dsl on top of irc's.
I suppose given that alternative, implementing to irc's dsl doesn't sound all that bad. Just feels like poor coupling.
Also, I know that there is some http stuff in libphutil's futures library, but the https future is shit and I need to do some custom curlopt stuff I wasn't sure how to do with that. But if you think this should be refactored, let me know.
I tested this with the ObjectHandler (messages with DXXX initiate the bot to respond with the title/link just as with irc), but beyond that, I haven't tried any of the other handlers, so if there are complications you think i'm going to run into, just let me know (this is one of the reasons for requesting review early on).
Also, this diff is against my last one, even though that hasn't been merged down yet. It was starting to get large and I'd prefer to keep to two conversations separate.
Fixing some lint issues.
Test Plan: Ran the bot with the Object Handler in campfire and observed it behaving properly.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2462
Differential Revision: https://secure.phabricator.com/D4830
Summary:
I wasn't able to reproduce the "recursion detected" in real web request but I saw lots of 1073741824 refcounts in `debug_zval_dump()` of $object.
I'm not sure how that happens.
Test Plan: D4807#4
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4839
Summary:
Ugh, just wrote out a huge message, only to lose it with a fat-fingered ctrl-c. Le sigh.
First pass at decoupling the bot from the protocol. Noticeably absent is the command/message coupling. After this design pass I'll give that a go. Could use some advice, thinking that handlers should only create messages (which can be public or private) and not open ended, undefined 'commands'. The problem being that there needs to be some consistant api if we want handlers to be protocol agnostic. Perhaps that's a pipedream, what are your thoughts?
Secondly, a few notes, design review requests on the changes i did make:
# Config. For now i'm passing config through to the adapter. This was mainly to remain backwards compatible on the config. I was thinking it should probably be namespaced into it's own subobject though to distinguish the adapter config from the bot config.
# Adapter selection. This flavor is the one-bot-daemon, config specified protocol version. The upside is that in the future they won't have to run different daemons for this stuff, just have different config, and the door is open for multiple protocol adapters down the road if need be. The downside is that I had to rename the daemon (non-backwards compatible change) and there will need to be some sort of runtime evaluation for instatiation of the adapter. For now I just have a crude switch, but I was thinking of just taking the string they supply as the class name (ala `try { new $clasName(); } catch...`) so as to allow for homegrown adapters, but I wasn't sure how such runtime magic would go over. Also, an alternative would be to make the PhabricatorBot class a non-abstract non-final base class and have the adapters be accompanied by a bot class that just defines their adapter as a property. The upside of which is backwards compatibility (welcome back PhabricatorIRCBot) and perhaps a little bit clearer plugin path for homegrowners.
# Logging. You'll notice I commented out two very important logging lines in the irc adapter. This isn't intended to remain commented out, but I'm not sure what the best way is to get logging at this layer. I'm wary of just composing the daemon back down into the adapter (bi-directional object composition makes my skin crawl), but something needs to happen, obviously. Advice?
That's it. After the feedback on the above, you can either merge down, or wait until i finish the command/message refactor if you don't think the diff will grow too large. Up to you, this all functions as is.
Test Plan: Ran an irc bot, connected, read input, and wrote output including handler integration.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2462
Differential Revision: https://secure.phabricator.com/D4757
Summary: Fixes various array_combine() warnings for PHP < 5.4
Test Plan: lint/unit/grep
Reviewers: btrahan, vrana, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4660
Summary:
Some time ago, we added `ORDER BY id ASC` to the worker `UPDATE ...` query, because someone reported that their MySQL read slaves were complaining about the query (I can't find the exact error message, but something to the effect of the rows the query affected not being deterministic). This seemed harmless since it should be the same as the query's implicit order (I guess?), but actually made the query dramatically slower for large numbers of rows.
On my local machine, this query takes about 2 seconds with ~1M rows. If I run `SELECT`, or run `UPDATE` without ORDER BY, the query takes < 0.01s. I don't understand exactly what's happening -- my guess is something to do with the ORDER BY implying that a lot of rows need to be locked?
In T2372, a user is seeing 20-60s rumtimes on this query.
I solved this by doing a SELECT, followed by an UPDATE. Each query runs quickly. This introduces the possibility of a race (two processes SELECT the same rows, then try to UPDATE), which we currently recover from by having the second UPDATE fail and then having that daemon try again 1 second later. This seems generally reasonable. Some alternatives I considered:
- We could SELECT ... LOCK FOR UPDATE, but failing and retrying a little later seems at least as good as blocking.
- We could select more rows than we need, and then try to lock some of them randomly. I think this would work well, but it's a bit more complex than what we're doing now so I left it until we have a clearer need.
Test Plan:
Inserted ~1M tasks into the queue. Ran `phd debug taskmaster`, saw ~2s task updates. Applied patch. Ran `phd debug taskmaster`, saw <1ms updates. Ran `phd launch 8 taskmaster`, saw rapid completion of tasks.
This stuff also has fairly thorough unit test coverage.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2372
Differential Revision: https://secure.phabricator.com/D4576
Summary: These have been marked as deprecated since May 2012. Clean them up.
Test Plan: Grepped for `repository-launch`, `phd_load_tracked_repositories`: no hits.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2372
Differential Revision: https://secure.phabricator.com/D4575
Summary: ignore - array - Array of nicks to ignore all mesages from
Test Plan: run phabot with ignore set
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4582
Summary:
Follows Phabricator's feed and puts notifications into channels
that are configured.
~~notification.all - bool - 1:1 stories to messages~~
notification.types - array - Specific story types to notify for - ["differential", "maniphest"]
notification.verbosity - int - Range of 0-3 for verbosity
notification.max_pages - int - Maximum number of pages to go back per poll
notification.page_size - int - Size of pages (limit) to poll
~~notification.channels - array - Array of channels to send messages to~~
~~notification.sleep - int - Seconds to sleep between polls~~
Test Plan: Run phabot with various configuration options
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, asherkin
Differential Revision: https://secure.phabricator.com/D4418
Summary: Allows to easily disable responding to "where is..."
Test Plan: Run ircbot with and without the handler
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4444
Summary:
Fixes T2273. We currently discard logs, service calls, etc., for daemons, but not for other scripts. However, other scripts may be long-running or issue a large body of service calls (e.g., `bin/search index --all`). We never retrieve this information from scripts (it is used to build darkconsole; in scripts, we echo it immediately under --trace), so discard it immediately to prevent these scripts from requiring a large amount of memory.
(When the daemons load `__init_script__.php` they end up calling this code, so this doesn't change anything for them. They hit another ServiceProfiler discard along the daemon pathways in libphutil, but the call is idempotent.)
Test Plan: Ran `bin/search index --all` and saw increasing memory usage before this patch, but steady memory usage after this patch.
Reviewers: btrahan, vrana, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2273
Differential Revision: https://secure.phabricator.com/D4364
Summary:
This replaces D4175 and makes it so phabot doesn't message anyone.
The reasons for this are twofold:
- It was possible to get information from the bot, by private messaging it, even
if the bot was only in a +i channel (on a public network) -- meaning that if
someone knew the nickname of the bot, they could obtain e.g. ticket names
or diff titles.
- The other time it messaged people was when you typed e.g. "somenick: T123".
Most times when this is triggered, it's done so on accident.
See discussion on the old revision (D4175).
Test Plan:
15:29:33 ::: Irssi: Starting query in quartz with cb-phabot
15:29:38 <relrod> T2
(nothing back)
and
15:29:21 <@relrod> rublets: T1
15:29:21 < cb-phabot> T1: asdfasdf (Priority: Needs Triage) - http://local.elrod.me/T1
Reviewers: epriestley, btrahan, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4339
Summary:
- Move GC options into PHP.
- Remove the "run at" and "run for" options. The GC daemon doesn't actually do any table scans, is very gentle, and runs for like 3 seconds per day in any normal install. Just limit it to running once every 4 hours when it's caught up and call it a day.
Test Plan: Edited GC options.
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4321
Summary:
See discussion in D4204. Facebook currently has a 314MB remarkup cache with a 55MB index, which is slow to access. Under the theory that this is an index size/quality problem (the current index is on a potentially-384-byte field, with many keys sharing prefixes), provide a more general index with fancy new features:
- It implements PhutilKeyValueCache, so it can be a component in cache stacks and supports TTL.
- It has a 12-byte hash-based key.
- It automatically compresses large blocks of data (most of what we store is highly-compressible HTML).
Test Plan:
- Basics:
- Loaded /paste/, saw caches generate and save.
- Reloaded /paste/, saw the page hit cache.
- GC:
- Ran GC daemon, saw nothing.
- Set maximum lifetime to 1 second, ran GC daemon, saw it collect the entire cache.
- Deflate:
- Selected row formats from the database, saw a mixture of 'raw' and 'deflate' storage.
- Used profiler to verify that 'deflate' is fast (12 calls @ 220us on my paste list).
- Ran unit tests
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4259
Summary: Some fallout from D4191.
Test Plan: Sent "D12" in IRC and got a response.
Reviewers: epriestley, vrana, zeeg
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4235
Summary:
Load the data for daemon worker tasks when viewing them, and present
the information in a useful way. This defaults to printing the json data,
but for some classes of worker it will also link to the corresponding
object, to make debugging problems with workers easier.
Test Plan:
load /daemon/task/NNN for a CommitParserWorker and a MetaMTAWorker, and
see the addition of a data field with useful content and link.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4226
Summary: Include task ID and class when raising this exception. I took a brief stab at doing this generically, but (a) we specifically raise this exception outside of normal try/catch because we can't follow normal recovery rules for it and (b) we don't have a reasonable PhutilProxyException or similar right now which would preserve stack traces, and don't have builtin exception nesting support until PHP 5.3.
Test Plan: Faked this exception, verified we get more information in the logs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2193
Differential Revision: https://secure.phabricator.com/D4205
Summary:
People hit three issues with D3914:
- As per T2059, we applied a schema change from a `.php` patch, which currently does not work if you use a different user to make schema changes than for normal use.
- Since the change in question is idempotent, just move it to a `.sql` patch. We'll follow up in T2059 and fix it properly.
- Rogue daemons at several installs used old code (expecting autoincrement) to insert into the new table (no autoincrement), thereby creating tasks with ID 0.
- Rename the table so they'll fail.
- This also makes the code a little more consistent.
- Some installs now have tasks with ID 0.
- Use checks against null rather than against 0 so we can process these tasks.
The major issues this fixes are the schema upgrade failure in T2059, and the infinite loops in T2072 and elsewhere.
This isn't really a fully statisfactory fix. I'll discuss some next steps in T2072.
Test Plan: Created new tasks via MetaMTA/Differential. Ran tasks with `phd debug taskmaster`. Inserted a task 0 and verified it ran and archived correctly.
Reviewers: btrahan, vrana, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2072, T2059
Differential Revision: https://secure.phabricator.com/D3973
Summary: See D3912 for discussion. InnoDB may reuse autoincrement IDs after restart; provide a way to avoid it.
Test Plan: Unit tests. Scheduled and executed tasks through `drydock lease --type host` and `phd debug taskmaster`.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3914
Summary:
- Remove EC2, RemoteHost, Application, etc., blueprints for now. They're very proof-of-concept and Blueprints are getting API changes I don't want to bother propagating for now. Leave the abstract base class and the LocalHost blueprint. I'll restore the more complicated ones once better foundations are in place.
- Remove the Allocate controller from the web UI. The original vision here was that you'd manually allocate resources in some cases, but it no longer makes sense to do so as all allocations come from leases now. This simplifies allocations and makes the rule for when we can clean up resources clear-cut (if a resource has no more active leases, it can be cleaned up). Instead, we'll build resources like the localhost and remote hosts lazily, when leases come in for them.
- Add some configuration to manage the localhost blueprint.
- Refactor `canAllocateResources()` into `isEnabled()` (for config checks) and `canAllocateMoreResources()` (for quota checks, e.g. too many resources are allocated already).
- Juggle some signatures to align better with a world where blueprints generally do allocate.
- Add some more logging and error handling.
- Fix an issue with log ordering.
Test Plan: Allocated some localhost leases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3902
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary:
We lock tasks by setting `leaseOwner` to a unique value, but the value is currently unique-to-the-process rather than unique-to-the-query. This means that if a process leases a task, then leases another task, both tasks will have the same `leaseOwner`. This can cause an issue where we go to select the task we just leased and get the other task instead, if we aren't careful about the select construction.
We can avoid this by being clever and making sure the select is constructed correctly, but making the `leaseOwner` unique to the query is much simpler and more foolproof. This guarantees we always select only the rows we just leased.
Also remove `PhabricatorGoodForNothingWorker` since `PhabricatorTestWorker` fills its role of allowing things to be tested, and simplify the unit tests since we don't need to be clever about avoiding this issue any more.
Test Plan: Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3862
Summary:
This was the major goal of D3859/D3855, and to a lesser degree D3854/D3852.
As Drydock is allocating a resource, it may need to allocate other resources first. For example, if it's allocating a working copy, it may need to allocate a host first.
Currently, we have the process basically queue up the allocation (insert a task into the queue) and sleep() until it finishes. This is problematic for a bunch of reasons, but the major one is that if allocation takes more resources (host, port, machine, DNS) than you have daemons, they could all end up sleeping and waiting for some other daemon to do their work. This is really stupid. Even if you only take up some of them, you're spending slots sleeping when you could be doing useful work.
To partially get around this and make the CLI experience less dumb, there's this goofy `synchronous` flag that gets passed around everywhere and pushes the workflow through a pile of special cases. Basically the `synchronous` flag causes us to do everything in-process. But this is dumb too because we'd rather do things in parallel if we can, and we have to have a lot of special case code to make it work at all.
Get rid of all of this. Instead of sleep()ing, try to work on the tasks that need to be worked on. If another daemon grabbed them already that's fine, but in the worst case we just gracefully degrade and do everything in process. So we get the best of both worlds: if we have parallelizable tasks and free daemons, things will execute in parallel. If we have nonparallelizable tasks or no free daemons, things will execute in process.
Test Plan: Ran `drydock_control.php --trace` and saw it perform cascading allocations without sleeping or special casing.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3861
Summary:
- Clean up a TODO about permanent failures.
- Clean up a TODO about failing tasks after too many retries.
- Clean up a TODO about testing for bad leases.
- Make the lease/retry implementation more flexible and natural.
- Make completely bogus tasks fail permanently.
- Make PhabricatorMetaMTAWorker use new `getWaitBeforeRetry()` (as intended), not hackily implement logic in `getRequiredLeaseTime()`.
- Document worker hooks for failures and retries.
- Provide coverage on everything.
Test Plan: Ran unit tests. Ran `bin/phd debug taskmaster`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3859
Summary: This simplifies the fairly thorny logic of leasing tasks a bit. I'm planning to introduce another callsite shortly for Drydock.
Test Plan: Ran `bin/phd debug taskmaster`, observed sensible queries and correct operation.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3855
Summary: Make mobile-friendly and provide UI to cancel/retry tasks. Remove display of task data to arbitrary users, as it may be sensitive.
Test Plan:
{F22502}
{F22503}
{F22504}
{F22505}
{F22506}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3854
Summary:
Currently, when taskmasters complete a task it is immediately deleted. This prevents us from doing some general things, like:
- Supporting the idea of permanent failure (e.g., after N failures just stop trying).
- Showing the user how fast taskmasters are completing tasks.
- Showing the user how long tasks took to complete.
Having better visibility into this is important to Drydock, which builds on the task system. Also, generally buff debug output for task execution.
Test Plan: Ran `bin/phd debug taskmaster`. Ran `bin/phd debug garbage`. Queued some tasks via various systems.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3852
Summary: Provide array() default so we don't foreach() over null in the case of a missing config (from @dctrwatson).
Test Plan: Will verify with @dctrwatson.
Reviewers: vrana, btrahan, dctrwatson
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3686
Summary: Previously, the identification string was thrown at the server long before you were connected, I've moved this to the end of the motd raw, and now errthangz gud
Test Plan: Register an account for your bot to use, give your bot the correct nick and password, then watch
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3410
Summary: In my haste, I forgot a trailing ?
Test Plan: Try both "Where is Derp?" and "Where in the world is Derp?"
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3387
Summary: Added match to the novel statement: Where in the world is derp?
Test Plan: Say something like "Where in the world is CarmenSandiego?"
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3318
Summary:
See D3126, T1667, T1658. Prior to D3126, `phd` did not use MySQL directly. Now that it does, there are at least two specific problems (see inline comment).
In the long term, we should probably break this dependency and use Conduit. However, we don't currently have access to the daemon log ID and getting it is a mess (the overseer generates it), and I think I want to rewrite how all this works at some point anyway (the daemon calls are currently completely unauthenticated, which is silly -- we should move them to an authenticated channel at some point, I think).
Test Plan: Ran `phd stop` with a bad MySQL config against a non-running daemon, didn't get a query error.
Reviewers: nh, vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1667, T1658
Differential Revision: https://secure.phabricator.com/D3314
Summary: The Log and PID directory should be separable in the config file
Test Plan: Start the daemons, and check if the pid and log files are stored in directories that were specified in the config file.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3149
Summary:
To make it easier to monitor daemons, let's store their current state
(running, died, exited, or unknown) to the db. The purpose of this is to
provide more information on the daemon console about the status of daemons,
especially when they are running on multiple machines. This is mostly backend
work, with only a few frontend changes. (It is also dependent on a change
to libphutil.)
These changes will make dead or stuck daemons more obvious, and will allow
more work on the frontend to hide daemons (and logs) that have exited cleanly,
i.e. ones we don't care about any more.
Test Plan:
- run db migration, check in db that all daemons were marked as exited
- start up a daemon, check in db that it is marked as running
- open web interface, check that daemon is listed as running
- after daemon has been running for a little bit, check in db that dateModified
is being updated (indicating daemon is properly sending heartbeat)
- kill -9 daemon (but don't run bin/phd yet), and check that db still shows it
as running
- edit daemon db entry to show it as being on a different host, and backdate
dateModified field by 3 minutes, and check the web ui to show that the status
is unknown.
- change db entry to have proper host, check in web ui that daemon status is
displayed as dead. Check db to see that the status was saved.
- run bin/phd stop, and see that the formerly dead daemon is now exited.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3126
Summary: You need to use -- to separate arguments for phd and the daemon.
Test Plan: Ran with the extra --.
Reviewers: epriestley, vrana
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3106
'phd status' should have a stable result when invoked multiple times.
Automatically removing PID files for dead daemons every time 'phd status' is
invoked prevents tools from noticing that a daemon has died if something
happens to invoke 'phd status' before the tool looks. This affects Puppet
noticably, since it probably runs the status command every half hour.
'phd status' may be invoked by tools (such as puppet) which need to make
automated decisions about whether to start/restart the daemon. To enable this,
'phd status' now exits with 0 if all daemons are running, 1 if no daemons are
running, and 2 if some (but not all) daemons are running.
Summary: http://www.networksorcery.com/enp/protocol/irc.htm
Test Plan: augment code with an additional debug line (phlog('hi');) so I can see my case was trigged and it will fall through. setup an ill-configured IRC server with ngircd. Configure an ircbot to connect to said ill-configured IRC server. verify ircbot connected to channel. verify in irc bot logs that debug line was invoked.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1452
Differential Revision: https://secure.phabricator.com/D2962
Summary: Allow the GC daemon to collect the new markup cache.
Test Plan: Ran gc daemon in "debug" mode, saw it collect cache entries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2947
Summary:
Support the `--verbose` flag added in D2795 in `phd`. See T1389.
Also simplify argument generation a little bit.
Test Plan: Ran "nice" daemon with debug, daemon + verbose, daemon + no verbose.
Reviewers: vrana, jungejason, edward, aurelijus
Reviewed By: aurelijus
CC: aran
Maniphest Tasks: T1389
Differential Revision: https://secure.phabricator.com/D2797
Summary: It requires `allow_url_fopen` which we don't check in setup and our installation is about to disable it.
Test Plan:
Login with OAuth.
/oauth/facebook/diagnose/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2787
Summary: replace differential.find with differential.query and display in requested order
Test Plan: say D444D222D443D442 and ensure they are in the correct order
Reviewers: epriestley
Reviewed By: epriestley
CC: Mnkras, aran
Differential Revision: https://secure.phabricator.com/D2656
Summary:
- `kill_init.php` said "Moving 1000 files" - I hope that this is not some limit in `FileFinder`.
- [src/infrastructure/celerity] `git mv utils.php map.php; git mv api/utils.php api.php`
- Comment `phutil_libraries` in `.arcconfig` and run `arc liberate`.
NOTE: `arc diff` timed out so I'm pushing it without review.
Test Plan:
/D1234
Browsed around, especially in `applications/repository/worker/commitchangeparser` and `applications/` in general.
Auditors: epriestley
Maniphest Tasks: T1103
Summary: D2490 was not my finest hour and I incorrectly thought it was a null value from error. In reality this error is impossible and its just a valid empty array so instead use the empty predicate to bail.
Test Plan: with our logic combined, this be tested
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2503
Summary: 'cuz github issue 114 came into existence. instead, just return false early here. note i am not sure if I should phlog that this is happening or not but its not exception worthy IMO.
Test Plan: lint-only 'cuz i don't want to setup an IRC server locally / somehow get my local phabricator instance accessible out there. happy to test end to end if there's an easier way...!
Reviewers: vrana, epriestley
Reviewed By: vrana
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2490
Summary:
- Merge CommitTask daemon into PullLocal daemon. This is another artifact of past instability (and order-dependent parsers). We still publish to the timeline, although this was the last consumer. Long term we'll probably delete timeline and move to webhooks, since everyone who has asked about this stuff has been eager to trade away the durability and ordering of the timeline for the ease of use of webhooks. There's also no reason to timeline this anymore since parsing is no longer order-dependent.
- Add `phd start` to start all the daemons you need. Add `phd restart` to restart all the daemons you need. So cool~
- Simplify and improve phd and Diffusion daemon documentation.
Test Plan:
- Ran `phd start`.
- Ran `phd restart`.
- Generated/read documentation.
- Imported some stuff, got clean parses.
Reviewers: btrahan, csilvers
Reviewed By: csilvers
CC: aran, jungejason, nh
Differential Revision: https://secure.phabricator.com/D2433
Summary: "Committed" is SVN-specific language, and confusing in Git and Mercurial. Use neutral language instead.
Test Plan: Inspection.
Reviewers: btrahan, Makinde, vrana, jungejason
Reviewed By: vrana
CC: aran
Maniphest Tasks: T909
Differential Revision: https://secure.phabricator.com/D2087
Summary: Last of the big final patches. Left a few debatable classes (12 out of about 400) that I'll deal with individually eventually.
Test Plan: Ran testEverythingImplemented.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T795
Differential Revision: https://secure.phabricator.com/D1881
Summary:
Adds a macro handler that spams your channel with macros. Config is:
- macro.size: scale macros to this size before rasterizing
- macro.sleep: sleep this many seconds between lines (evade flood protection)
Test Plan: derpderp
Reviewers: kdeggelman, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1838
Summary:
This adds a new configuration setting:
"notification.actions" : [
"commit",
"abandon",
"actions"
]
if not set, displays all actions, if is set, display only what is set to display
Test Plan: add the notification.actions settings and set accordingly
Reviewers: epriestley, zeeg
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1820
Summary:
A user reported that their install (on an unusual piece of hardware) was hitting this timeout. We don't need to be quite so stingy; just use the default 30s timeout.
Also remove some kind of sentence fragment since I no longer remember what it meant and it doesn't make sense.
Test Plan: This change resolved the issue.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1805
Summary: The docs say "http://www.domain.com/" but if you don't put "/api/" it fails. GOTCHA!
Test Plan: Removed "/api/", launched bot, it worked.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T935
Differential Revision: https://secure.phabricator.com/D1763
Summary: Added support for audit comment, concern, accept
Test Plan: Comment / Concern / Accept audit, and say "What's new?" in IRC
Reviewers: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1730
Summary:
Added phabot irc command to directly message a user rather than outputting in a
channel.
Syntax:
ex:
````Korvin, D1717```
results in phabot private messaging me the info on D1717
Test Plan: ##nick##, [DTPVF]n
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1717
Summary:
Added what's new flood protection and fixed array_push issues.
Also added rhetoric for "Commit"
Test Plan: say "What's new?" twice within one minute
Reviewers: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1684
Summary:
Added "What's new?" to the ircbot
====Matches
```What is new?
What's new?
Whats new```
Test Plan:
<`Korvin> what is new?
<korvinbot-local> Derpen created D1: Herped the derp - http://phabricator.net/D1
It shows five.
Reviewers: epriestley
Reviewed By: epriestley
CC: epriestley, aran
Differential Revision: https://secure.phabricator.com/D1666
Summary:
This is pretty simple and unpolished, but it's getting pretty big and it seems
like a reasonable starting point.
- Log chat in various "channels".
- Conduit record and query methods.
- IRCBot integration for IRC logging
Major TODO:
- Web UI is really unpolished and has no search, paging, anchor-linking, etc.
Basically all presentation stuff, though.
- I think the bot should have a map of channels to log with channel aliases?
- The "channels" should probably be in a separate table.
- The "authors" should probably be correlated to Phabricator accounts somehow,
where possible.
Test Plan: Used phabotlocal to log #phabricator.
Reviewers: kdeggelman, btrahan, Koolvin
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T837
Differential Revision: https://secure.phabricator.com/D1625
Summary: posix may not be loaded on the web/cgi SAPI but we call posix functions
on this pathway, which we hit on /daemon/. Fall back to exec if we don't have
posix.
Test Plan: Added "&& false" and verified the page executed a bunch of "ps"
tests.
Reviewers: Koolvin, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T821
Differential Revision: https://secure.phabricator.com/D1540
Summary: We currently allow you to launch abstract daemons; use
setConcreteOnly() to only list/launch concrete daemons.
Test Plan: Ran "phd list" (no abstract daemons listed), "phd launch
PhabricatorRepositoryCommitDiscoveryDaemon" (reasonable error message).
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T801
Differential Revision: https://secure.phabricator.com/D1487
Summary: When we try to kill a daemon but discover it isn't running, we should
remove the PID file. We can also simplify the logic here.
Test Plan: Ran "phd stop" a couple of times, subsequent runs did not try to stop
a legion of dead daemons.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T781
Differential Revision: https://secure.phabricator.com/D1421
Summary: When private messaged, the bot responds via private message to the
sender, instead of sending a private message to itself.
Test Plan: Mentioned tasks in public channels and private messages.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Maniphest Tasks: T274
Differential Revision: https://secure.phabricator.com/D1350
Summary: Simple notificaiton handler that reads the difx event timeline and
posts notifications to IRC.
Test Plan: Ran it in #phabricator.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Differential Revision: https://secure.phabricator.com/D1337
Summary:
It used to be more useful for daemons to spew random debugging information, but
features like "phd debug" and some fixes to error reporting like D1101 provide
better ways to debug, test, develop and diagnose daemons.
- Stop writing "." every time MetaMTA sends a message.
- Stop spewing the entire IRC protocol from the IRC bot unless in debug mode.
- Stop writing GC daemon log entries about collecting daemon logs (DURRR)
unless in debug mode.
Test Plan: Ran daemons in debug and non-debug modes, got expected level of
noisiness.
Reviewers: jungejason, nh, btrahan
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: https://secure.phabricator.com/D1268
Summary: Allow the bot to answer the question "where is X?", where X is a
symbol.
Test Plan:
phabotlocal joined the chat room.
epriestley: phabotlocal: where is DarkConsole?
phabotlocal left the chat room. (Remote host closed the connection)
phabotlocal joined the chat room.
epriestley: phabotlocal: where is DarkConsole?
phabotlocal left the chat room. (Remote host closed the connection)
phabotlocal joined the chat room.
epriestley: phabotlocal: where is DarkConsole?
phabotlocal: class DarkConsole (php):
http://local.aphront.com/diffusion/SUBC/browse/src/aphront/console/api/DarkConsole.php$22
epriestley: thanks phabotlocal that is vastly more useful
phabotlocal left the chat room. (Remote host closed the connection)
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T315
Differential Revision: https://secure.phabricator.com/D1261
Summary: There are currently two files, but all scripts require both of them,
which is clearly silly. In the longer term I want to rewrite all of this init
stuff to be more structured (e.g., merge webroot/index.php and __init_script__
better) but this reduces the surface area of the ad-hoc "include files" API we
have now, at least.
Test Plan:
- Grepped for __init_env__.php (no hits)
- Ran a unit test (to test unit changes)
- Ran a daemon (to test daemon changes)
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: 976
Summary:
This is a pretty bad, but working implmentation of a way to kill one particular PID that
is controlled by Phabricator. Also remove the second 'stop' from the ##phd help## list.
Test Plan:
[ricky@rhelpad01 phabricator] (phd-stop-twice)$ ./bin/phd status
PID Started Daemon
30154 Oct 1 2011, 2:38:08 AM PhabricatorMetaMTADaemon
30172 Oct 1 2011, 2:38:09 AM PhabricatorMetaMTADaemon
30190 Oct 1 2011, 2:38:09 AM PhabricatorMetaMTADaemon
30210 Oct 1 2011, 2:38:09 AM PhabricatorMetaMTADaemon
[ricky@rhelpad01 phabricator] (phd-stop-twice)$ ./bin/phd stop 30190
Stopping daemon 'PhabricatorMetaMTADaemon' (30190)...
Daemon 30190 exited normally.
[ricky@rhelpad01 phabricator] (phd-stop-twice)$ ./bin/phd stop 123456
123456 is not controlled by Phabricator. Not killing.
[ricky@rhelpad01 phabricator] (phd-stop-twice)$ ./bin/phd stop
Stopping daemon 'PhabricatorMetaMTADaemon' (30154)...
Stopping daemon 'PhabricatorMetaMTADaemon' (30172)...
Stopping daemon 'PhabricatorMetaMTADaemon' (30210)...
Daemon 30210 exited normally.
Daemon 30154 exited normally.
Daemon 30172 exited normally.
Reviewers: epriestley
CC:
Differential Revision: 975
Summary: Shows events which a page dispatched, plus all the registered
listeners.
Test Plan:
Pretty basic for now, but works OK:
https://secure.phabricator.com/file/view/PHID-FILE-49fcd23081ce55cf9369/
(I also made it dispatch some dummy events to verify they show up.)
Reviewers: aran
Reviewed By: aran
CC: aran
Differential Revision: 973
Summary: Do JOIN in the protocol handler, after we receive 376 ("end of motd").
Test Plan: Ran bot, it joined a channel after receieving a 376 command.
Reviewers: moos3, codeblock, aran, jungejason, tuomaspelkonen
Reviewed By: moos3
CC: aran, moos3
Differential Revision: 855
"user":"authenticationusername",
"pass":"thisuserspassowrd",
This will allow people with internal irc servers to use this if they control access from ldap for irc.
Summary: This has to table scan a ginormous table right now, give it a fighting
chance with a more usable key.
Test Plan:
- Launched GC daemon, no errors.
- Used test console to create a new transcript.
- Viewed some old transcripts.
- Ran EXPLAIN on the SELECT and verified it was utilizing the garbageCollected
key.
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, epriestley, jungejason
Differential Revision: 735
