Summary: We currently garbage collect general cache entries after a set period of time (30 days by default), but the recent changes to DarkConsole have left us writing a lot of large, short-TTL data to the cache. In addition to a maximum age, GC cache entires after they TTL out.
Test Plan: Ran GC daemon, saw TTL'd entries get collected. Inserted a TTL'd entry, saw it get collected by GC. Saw non-ttl'd entries not get collected.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4990
Summary: First pass. Flowdock supports interesting message types (like replies to messages), but for now implementing a standard messaging interface.
Test Plan: Ran both a Flowdock bot and a Campfire bot. Made sure both still connected and responded properly to the Object Handler.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4983
Summary:
Clearly silly to have a separate handler for this. I also made most of the protocol stuff direct writes so we don't need to ship them through handlers, and made the adapter ignore message it does not understand by default instead of sending them to IRC, and added PASTE "support".
We could still let handlers react to these messages by emitting them all as 'RAWIRC' or similar, but there's currently no need for that so I didn't bother.
Also fix an issue in D4924 with nickpass.
Test Plan: Had bot join IRC, talked to it.
Reviewers: indiefan
Reviewed By: indiefan
CC: aran
Differential Revision: https://secure.phabricator.com/D4925
Summary:
Make users/channels/rooms into objects, so we can later sort out stuff like Campfire user IDs, Phabricator vs chat accounts, etc.
The only change here is that I removed output buffering from the macro handler. We should move throttling/buffering to adapters instead and have it apply globally.
Test Plan: Ran IRC and Campfire bots and interacted with them.
Reviewers: indiefan
Reviewed By: indiefan
CC: aran
Differential Revision: https://secure.phabricator.com/D4924
Summary:
- Reduce visibiliy of config.
- Add a typehint.
Test Plan: Ran campfire/irc bots and chatted with them.
Reviewers: indiefan
Reviewed By: indiefan
CC: aran, amerigomasini
Differential Revision: https://secure.phabricator.com/D4923
Test Plan: Ran the bot with a handler that sends sound commands.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4922
Summary: Also added sender to the campfire adapter. This isn't extremely useful as it's just a numeric id, but it allows us to add ignores (specifically having the bot ignore itself).
Test Plan: Ran the bot, ignored itself.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4893
Summary:
- Use PhutilURI to correct for specifying "https://yourname.campfire.com/" instead of "https://yourname.campfire.com".
- Use HTTPSFuture to get logging via `--trace` and error detection (CA stuff should be OK since 37signals has real certs).
- On destruction, only try to leave rooms we've actually joined.
Test Plan: Setup a bot, had it join a room, talked to it.
Reviewers: indiefan
Reviewed By: indiefan
CC: aran
Differential Revision: https://secure.phabricator.com/D4849
Summary:
Decided the best approach for refactoring the message/command stuff would be to actually start implementing the campfire adapter to get a better idea of what the abstractions should look like. It feels awkward and unwieldy trying to maintain the irc command interface (notice the message instantiation in the `processReadBuffer()` method. However, i'm still not clear what the best approach is without requiring a re-write of nearly all the existing handlers and defining essentially a custom dsl on top of irc's.
I suppose given that alternative, implementing to irc's dsl doesn't sound all that bad. Just feels like poor coupling.
Also, I know that there is some http stuff in libphutil's futures library, but the https future is shit and I need to do some custom curlopt stuff I wasn't sure how to do with that. But if you think this should be refactored, let me know.
I tested this with the ObjectHandler (messages with DXXX initiate the bot to respond with the title/link just as with irc), but beyond that, I haven't tried any of the other handlers, so if there are complications you think i'm going to run into, just let me know (this is one of the reasons for requesting review early on).
Also, this diff is against my last one, even though that hasn't been merged down yet. It was starting to get large and I'd prefer to keep to two conversations separate.
Fixing some lint issues.
Test Plan: Ran the bot with the Object Handler in campfire and observed it behaving properly.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2462
Differential Revision: https://secure.phabricator.com/D4830
Summary:
I wasn't able to reproduce the "recursion detected" in real web request but I saw lots of 1073741824 refcounts in `debug_zval_dump()` of $object.
I'm not sure how that happens.
Test Plan: D4807#4
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4839
Summary:
Ugh, just wrote out a huge message, only to lose it with a fat-fingered ctrl-c. Le sigh.
First pass at decoupling the bot from the protocol. Noticeably absent is the command/message coupling. After this design pass I'll give that a go. Could use some advice, thinking that handlers should only create messages (which can be public or private) and not open ended, undefined 'commands'. The problem being that there needs to be some consistant api if we want handlers to be protocol agnostic. Perhaps that's a pipedream, what are your thoughts?
Secondly, a few notes, design review requests on the changes i did make:
# Config. For now i'm passing config through to the adapter. This was mainly to remain backwards compatible on the config. I was thinking it should probably be namespaced into it's own subobject though to distinguish the adapter config from the bot config.
# Adapter selection. This flavor is the one-bot-daemon, config specified protocol version. The upside is that in the future they won't have to run different daemons for this stuff, just have different config, and the door is open for multiple protocol adapters down the road if need be. The downside is that I had to rename the daemon (non-backwards compatible change) and there will need to be some sort of runtime evaluation for instatiation of the adapter. For now I just have a crude switch, but I was thinking of just taking the string they supply as the class name (ala `try { new $clasName(); } catch...`) so as to allow for homegrown adapters, but I wasn't sure how such runtime magic would go over. Also, an alternative would be to make the PhabricatorBot class a non-abstract non-final base class and have the adapters be accompanied by a bot class that just defines their adapter as a property. The upside of which is backwards compatibility (welcome back PhabricatorIRCBot) and perhaps a little bit clearer plugin path for homegrowners.
# Logging. You'll notice I commented out two very important logging lines in the irc adapter. This isn't intended to remain commented out, but I'm not sure what the best way is to get logging at this layer. I'm wary of just composing the daemon back down into the adapter (bi-directional object composition makes my skin crawl), but something needs to happen, obviously. Advice?
That's it. After the feedback on the above, you can either merge down, or wait until i finish the command/message refactor if you don't think the diff will grow too large. Up to you, this all functions as is.
Test Plan: Ran an irc bot, connected, read input, and wrote output including handler integration.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2462
Differential Revision: https://secure.phabricator.com/D4757
Summary: Fixes various array_combine() warnings for PHP < 5.4
Test Plan: lint/unit/grep
Reviewers: btrahan, vrana, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4660
Summary:
Some time ago, we added `ORDER BY id ASC` to the worker `UPDATE ...` query, because someone reported that their MySQL read slaves were complaining about the query (I can't find the exact error message, but something to the effect of the rows the query affected not being deterministic). This seemed harmless since it should be the same as the query's implicit order (I guess?), but actually made the query dramatically slower for large numbers of rows.
On my local machine, this query takes about 2 seconds with ~1M rows. If I run `SELECT`, or run `UPDATE` without ORDER BY, the query takes < 0.01s. I don't understand exactly what's happening -- my guess is something to do with the ORDER BY implying that a lot of rows need to be locked?
In T2372, a user is seeing 20-60s rumtimes on this query.
I solved this by doing a SELECT, followed by an UPDATE. Each query runs quickly. This introduces the possibility of a race (two processes SELECT the same rows, then try to UPDATE), which we currently recover from by having the second UPDATE fail and then having that daemon try again 1 second later. This seems generally reasonable. Some alternatives I considered:
- We could SELECT ... LOCK FOR UPDATE, but failing and retrying a little later seems at least as good as blocking.
- We could select more rows than we need, and then try to lock some of them randomly. I think this would work well, but it's a bit more complex than what we're doing now so I left it until we have a clearer need.
Test Plan:
Inserted ~1M tasks into the queue. Ran `phd debug taskmaster`, saw ~2s task updates. Applied patch. Ran `phd debug taskmaster`, saw <1ms updates. Ran `phd launch 8 taskmaster`, saw rapid completion of tasks.
This stuff also has fairly thorough unit test coverage.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2372
Differential Revision: https://secure.phabricator.com/D4576
Summary: These have been marked as deprecated since May 2012. Clean them up.
Test Plan: Grepped for `repository-launch`, `phd_load_tracked_repositories`: no hits.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2372
Differential Revision: https://secure.phabricator.com/D4575
Summary: ignore - array - Array of nicks to ignore all mesages from
Test Plan: run phabot with ignore set
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4582
Summary:
Follows Phabricator's feed and puts notifications into channels
that are configured.
~~notification.all - bool - 1:1 stories to messages~~
notification.types - array - Specific story types to notify for - ["differential", "maniphest"]
notification.verbosity - int - Range of 0-3 for verbosity
notification.max_pages - int - Maximum number of pages to go back per poll
notification.page_size - int - Size of pages (limit) to poll
~~notification.channels - array - Array of channels to send messages to~~
~~notification.sleep - int - Seconds to sleep between polls~~
Test Plan: Run phabot with various configuration options
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, asherkin
Differential Revision: https://secure.phabricator.com/D4418
Summary: Allows to easily disable responding to "where is..."
Test Plan: Run ircbot with and without the handler
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4444
Summary:
Fixes T2273. We currently discard logs, service calls, etc., for daemons, but not for other scripts. However, other scripts may be long-running or issue a large body of service calls (e.g., `bin/search index --all`). We never retrieve this information from scripts (it is used to build darkconsole; in scripts, we echo it immediately under --trace), so discard it immediately to prevent these scripts from requiring a large amount of memory.
(When the daemons load `__init_script__.php` they end up calling this code, so this doesn't change anything for them. They hit another ServiceProfiler discard along the daemon pathways in libphutil, but the call is idempotent.)
Test Plan: Ran `bin/search index --all` and saw increasing memory usage before this patch, but steady memory usage after this patch.
Reviewers: btrahan, vrana, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2273
Differential Revision: https://secure.phabricator.com/D4364
Summary:
This replaces D4175 and makes it so phabot doesn't message anyone.
The reasons for this are twofold:
- It was possible to get information from the bot, by private messaging it, even
if the bot was only in a +i channel (on a public network) -- meaning that if
someone knew the nickname of the bot, they could obtain e.g. ticket names
or diff titles.
- The other time it messaged people was when you typed e.g. "somenick: T123".
Most times when this is triggered, it's done so on accident.
See discussion on the old revision (D4175).
Test Plan:
15:29:33 ::: Irssi: Starting query in quartz with cb-phabot
15:29:38 <relrod> T2
(nothing back)
and
15:29:21 <@relrod> rublets: T1
15:29:21 < cb-phabot> T1: asdfasdf (Priority: Needs Triage) - http://local.elrod.me/T1
Reviewers: epriestley, btrahan, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4339
Summary:
- Move GC options into PHP.
- Remove the "run at" and "run for" options. The GC daemon doesn't actually do any table scans, is very gentle, and runs for like 3 seconds per day in any normal install. Just limit it to running once every 4 hours when it's caught up and call it a day.
Test Plan: Edited GC options.
Reviewers: btrahan, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2255
Differential Revision: https://secure.phabricator.com/D4321
Summary:
See discussion in D4204. Facebook currently has a 314MB remarkup cache with a 55MB index, which is slow to access. Under the theory that this is an index size/quality problem (the current index is on a potentially-384-byte field, with many keys sharing prefixes), provide a more general index with fancy new features:
- It implements PhutilKeyValueCache, so it can be a component in cache stacks and supports TTL.
- It has a 12-byte hash-based key.
- It automatically compresses large blocks of data (most of what we store is highly-compressible HTML).
Test Plan:
- Basics:
- Loaded /paste/, saw caches generate and save.
- Reloaded /paste/, saw the page hit cache.
- GC:
- Ran GC daemon, saw nothing.
- Set maximum lifetime to 1 second, ran GC daemon, saw it collect the entire cache.
- Deflate:
- Selected row formats from the database, saw a mixture of 'raw' and 'deflate' storage.
- Used profiler to verify that 'deflate' is fast (12 calls @ 220us on my paste list).
- Ran unit tests
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4259
Summary: Some fallout from D4191.
Test Plan: Sent "D12" in IRC and got a response.
Reviewers: epriestley, vrana, zeeg
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4235
Summary:
Load the data for daemon worker tasks when viewing them, and present
the information in a useful way. This defaults to printing the json data,
but for some classes of worker it will also link to the corresponding
object, to make debugging problems with workers easier.
Test Plan:
load /daemon/task/NNN for a CommitParserWorker and a MetaMTAWorker, and
see the addition of a data field with useful content and link.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4226
Summary: Include task ID and class when raising this exception. I took a brief stab at doing this generically, but (a) we specifically raise this exception outside of normal try/catch because we can't follow normal recovery rules for it and (b) we don't have a reasonable PhutilProxyException or similar right now which would preserve stack traces, and don't have builtin exception nesting support until PHP 5.3.
Test Plan: Faked this exception, verified we get more information in the logs.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2193
Differential Revision: https://secure.phabricator.com/D4205
Summary:
People hit three issues with D3914:
- As per T2059, we applied a schema change from a `.php` patch, which currently does not work if you use a different user to make schema changes than for normal use.
- Since the change in question is idempotent, just move it to a `.sql` patch. We'll follow up in T2059 and fix it properly.
- Rogue daemons at several installs used old code (expecting autoincrement) to insert into the new table (no autoincrement), thereby creating tasks with ID 0.
- Rename the table so they'll fail.
- This also makes the code a little more consistent.
- Some installs now have tasks with ID 0.
- Use checks against null rather than against 0 so we can process these tasks.
The major issues this fixes are the schema upgrade failure in T2059, and the infinite loops in T2072 and elsewhere.
This isn't really a fully statisfactory fix. I'll discuss some next steps in T2072.
Test Plan: Created new tasks via MetaMTA/Differential. Ran tasks with `phd debug taskmaster`. Inserted a task 0 and verified it ran and archived correctly.
Reviewers: btrahan, vrana, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2072, T2059
Differential Revision: https://secure.phabricator.com/D3973
Summary: See D3912 for discussion. InnoDB may reuse autoincrement IDs after restart; provide a way to avoid it.
Test Plan: Unit tests. Scheduled and executed tasks through `drydock lease --type host` and `phd debug taskmaster`.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3914
Summary:
- Remove EC2, RemoteHost, Application, etc., blueprints for now. They're very proof-of-concept and Blueprints are getting API changes I don't want to bother propagating for now. Leave the abstract base class and the LocalHost blueprint. I'll restore the more complicated ones once better foundations are in place.
- Remove the Allocate controller from the web UI. The original vision here was that you'd manually allocate resources in some cases, but it no longer makes sense to do so as all allocations come from leases now. This simplifies allocations and makes the rule for when we can clean up resources clear-cut (if a resource has no more active leases, it can be cleaned up). Instead, we'll build resources like the localhost and remote hosts lazily, when leases come in for them.
- Add some configuration to manage the localhost blueprint.
- Refactor `canAllocateResources()` into `isEnabled()` (for config checks) and `canAllocateMoreResources()` (for quota checks, e.g. too many resources are allocated already).
- Juggle some signatures to align better with a world where blueprints generally do allocate.
- Add some more logging and error handling.
- Fix an issue with log ordering.
Test Plan: Allocated some localhost leases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3902
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary:
We lock tasks by setting `leaseOwner` to a unique value, but the value is currently unique-to-the-process rather than unique-to-the-query. This means that if a process leases a task, then leases another task, both tasks will have the same `leaseOwner`. This can cause an issue where we go to select the task we just leased and get the other task instead, if we aren't careful about the select construction.
We can avoid this by being clever and making sure the select is constructed correctly, but making the `leaseOwner` unique to the query is much simpler and more foolproof. This guarantees we always select only the rows we just leased.
Also remove `PhabricatorGoodForNothingWorker` since `PhabricatorTestWorker` fills its role of allowing things to be tested, and simplify the unit tests since we don't need to be clever about avoiding this issue any more.
Test Plan: Ran unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3862
Summary:
This was the major goal of D3859/D3855, and to a lesser degree D3854/D3852.
As Drydock is allocating a resource, it may need to allocate other resources first. For example, if it's allocating a working copy, it may need to allocate a host first.
Currently, we have the process basically queue up the allocation (insert a task into the queue) and sleep() until it finishes. This is problematic for a bunch of reasons, but the major one is that if allocation takes more resources (host, port, machine, DNS) than you have daemons, they could all end up sleeping and waiting for some other daemon to do their work. This is really stupid. Even if you only take up some of them, you're spending slots sleeping when you could be doing useful work.
To partially get around this and make the CLI experience less dumb, there's this goofy `synchronous` flag that gets passed around everywhere and pushes the workflow through a pile of special cases. Basically the `synchronous` flag causes us to do everything in-process. But this is dumb too because we'd rather do things in parallel if we can, and we have to have a lot of special case code to make it work at all.
Get rid of all of this. Instead of sleep()ing, try to work on the tasks that need to be worked on. If another daemon grabbed them already that's fine, but in the worst case we just gracefully degrade and do everything in process. So we get the best of both worlds: if we have parallelizable tasks and free daemons, things will execute in parallel. If we have nonparallelizable tasks or no free daemons, things will execute in process.
Test Plan: Ran `drydock_control.php --trace` and saw it perform cascading allocations without sleeping or special casing.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3861
Summary:
- Clean up a TODO about permanent failures.
- Clean up a TODO about failing tasks after too many retries.
- Clean up a TODO about testing for bad leases.
- Make the lease/retry implementation more flexible and natural.
- Make completely bogus tasks fail permanently.
- Make PhabricatorMetaMTAWorker use new `getWaitBeforeRetry()` (as intended), not hackily implement logic in `getRequiredLeaseTime()`.
- Document worker hooks for failures and retries.
- Provide coverage on everything.
Test Plan: Ran unit tests. Ran `bin/phd debug taskmaster`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3859
Summary: This simplifies the fairly thorny logic of leasing tasks a bit. I'm planning to introduce another callsite shortly for Drydock.
Test Plan: Ran `bin/phd debug taskmaster`, observed sensible queries and correct operation.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3855
Summary: Make mobile-friendly and provide UI to cancel/retry tasks. Remove display of task data to arbitrary users, as it may be sensitive.
Test Plan:
{F22502}
{F22503}
{F22504}
{F22505}
{F22506}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3854
Summary:
Currently, when taskmasters complete a task it is immediately deleted. This prevents us from doing some general things, like:
- Supporting the idea of permanent failure (e.g., after N failures just stop trying).
- Showing the user how fast taskmasters are completing tasks.
- Showing the user how long tasks took to complete.
Having better visibility into this is important to Drydock, which builds on the task system. Also, generally buff debug output for task execution.
Test Plan: Ran `bin/phd debug taskmaster`. Ran `bin/phd debug garbage`. Queued some tasks via various systems.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3852
Summary: Provide array() default so we don't foreach() over null in the case of a missing config (from @dctrwatson).
Test Plan: Will verify with @dctrwatson.
Reviewers: vrana, btrahan, dctrwatson
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3686
Summary: Previously, the identification string was thrown at the server long before you were connected, I've moved this to the end of the motd raw, and now errthangz gud
Test Plan: Register an account for your bot to use, give your bot the correct nick and password, then watch
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3410
Summary: In my haste, I forgot a trailing ?
Test Plan: Try both "Where is Derp?" and "Where in the world is Derp?"
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3387
Summary: Added match to the novel statement: Where in the world is derp?
Test Plan: Say something like "Where in the world is CarmenSandiego?"
Reviewers: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D3318
Summary:
See D3126, T1667, T1658. Prior to D3126, `phd` did not use MySQL directly. Now that it does, there are at least two specific problems (see inline comment).
In the long term, we should probably break this dependency and use Conduit. However, we don't currently have access to the daemon log ID and getting it is a mess (the overseer generates it), and I think I want to rewrite how all this works at some point anyway (the daemon calls are currently completely unauthenticated, which is silly -- we should move them to an authenticated channel at some point, I think).
Test Plan: Ran `phd stop` with a bad MySQL config against a non-running daemon, didn't get a query error.
Reviewers: nh, vrana, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1667, T1658
Differential Revision: https://secure.phabricator.com/D3314
Summary: The Log and PID directory should be separable in the config file
Test Plan: Start the daemons, and check if the pid and log files are stored in directories that were specified in the config file.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3149
Summary:
To make it easier to monitor daemons, let's store their current state
(running, died, exited, or unknown) to the db. The purpose of this is to
provide more information on the daemon console about the status of daemons,
especially when they are running on multiple machines. This is mostly backend
work, with only a few frontend changes. (It is also dependent on a change
to libphutil.)
These changes will make dead or stuck daemons more obvious, and will allow
more work on the frontend to hide daemons (and logs) that have exited cleanly,
i.e. ones we don't care about any more.
Test Plan:
- run db migration, check in db that all daemons were marked as exited
- start up a daemon, check in db that it is marked as running
- open web interface, check that daemon is listed as running
- after daemon has been running for a little bit, check in db that dateModified
is being updated (indicating daemon is properly sending heartbeat)
- kill -9 daemon (but don't run bin/phd yet), and check that db still shows it
as running
- edit daemon db entry to show it as being on a different host, and backdate
dateModified field by 3 minutes, and check the web ui to show that the status
is unknown.
- change db entry to have proper host, check in web ui that daemon status is
displayed as dead. Check db to see that the status was saved.
- run bin/phd stop, and see that the formerly dead daemon is now exited.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3126
Summary: You need to use -- to separate arguments for phd and the daemon.
Test Plan: Ran with the extra --.
Reviewers: epriestley, vrana
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3106
'phd status' should have a stable result when invoked multiple times.
Automatically removing PID files for dead daemons every time 'phd status' is
invoked prevents tools from noticing that a daemon has died if something
happens to invoke 'phd status' before the tool looks. This affects Puppet
noticably, since it probably runs the status command every half hour.
'phd status' may be invoked by tools (such as puppet) which need to make
automated decisions about whether to start/restart the daemon. To enable this,
'phd status' now exits with 0 if all daemons are running, 1 if no daemons are
running, and 2 if some (but not all) daemons are running.
Summary: http://www.networksorcery.com/enp/protocol/irc.htm
Test Plan: augment code with an additional debug line (phlog('hi');) so I can see my case was trigged and it will fall through. setup an ill-configured IRC server with ngircd. Configure an ircbot to connect to said ill-configured IRC server. verify ircbot connected to channel. verify in irc bot logs that debug line was invoked.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1452
Differential Revision: https://secure.phabricator.com/D2962
Summary: Allow the GC daemon to collect the new markup cache.
Test Plan: Ran gc daemon in "debug" mode, saw it collect cache entries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2947
Summary:
Support the `--verbose` flag added in D2795 in `phd`. See T1389.
Also simplify argument generation a little bit.
Test Plan: Ran "nice" daemon with debug, daemon + verbose, daemon + no verbose.
Reviewers: vrana, jungejason, edward, aurelijus
Reviewed By: aurelijus
CC: aran
Maniphest Tasks: T1389
Differential Revision: https://secure.phabricator.com/D2797
Summary: It requires `allow_url_fopen` which we don't check in setup and our installation is about to disable it.
Test Plan:
Login with OAuth.
/oauth/facebook/diagnose/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2787
Summary: replace differential.find with differential.query and display in requested order
Test Plan: say D444D222D443D442 and ensure they are in the correct order
Reviewers: epriestley
Reviewed By: epriestley
CC: Mnkras, aran
Differential Revision: https://secure.phabricator.com/D2656
Summary:
- `kill_init.php` said "Moving 1000 files" - I hope that this is not some limit in `FileFinder`.
- [src/infrastructure/celerity] `git mv utils.php map.php; git mv api/utils.php api.php`
- Comment `phutil_libraries` in `.arcconfig` and run `arc liberate`.
NOTE: `arc diff` timed out so I'm pushing it without review.
Test Plan:
/D1234
Browsed around, especially in `applications/repository/worker/commitchangeparser` and `applications/` in general.
Auditors: epriestley
Maniphest Tasks: T1103
Summary: D2490 was not my finest hour and I incorrectly thought it was a null value from error. In reality this error is impossible and its just a valid empty array so instead use the empty predicate to bail.
Test Plan: with our logic combined, this be tested
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2503
Summary: 'cuz github issue 114 came into existence. instead, just return false early here. note i am not sure if I should phlog that this is happening or not but its not exception worthy IMO.
Test Plan: lint-only 'cuz i don't want to setup an IRC server locally / somehow get my local phabricator instance accessible out there. happy to test end to end if there's an easier way...!
Reviewers: vrana, epriestley
Reviewed By: vrana
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2490
Summary:
- Merge CommitTask daemon into PullLocal daemon. This is another artifact of past instability (and order-dependent parsers). We still publish to the timeline, although this was the last consumer. Long term we'll probably delete timeline and move to webhooks, since everyone who has asked about this stuff has been eager to trade away the durability and ordering of the timeline for the ease of use of webhooks. There's also no reason to timeline this anymore since parsing is no longer order-dependent.
- Add `phd start` to start all the daemons you need. Add `phd restart` to restart all the daemons you need. So cool~
- Simplify and improve phd and Diffusion daemon documentation.
Test Plan:
- Ran `phd start`.
- Ran `phd restart`.
- Generated/read documentation.
- Imported some stuff, got clean parses.
Reviewers: btrahan, csilvers
Reviewed By: csilvers
CC: aran, jungejason, nh
Differential Revision: https://secure.phabricator.com/D2433
Summary: "Committed" is SVN-specific language, and confusing in Git and Mercurial. Use neutral language instead.
Test Plan: Inspection.
Reviewers: btrahan, Makinde, vrana, jungejason
Reviewed By: vrana
CC: aran
Maniphest Tasks: T909
Differential Revision: https://secure.phabricator.com/D2087
Summary: Last of the big final patches. Left a few debatable classes (12 out of about 400) that I'll deal with individually eventually.
Test Plan: Ran testEverythingImplemented.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T795
Differential Revision: https://secure.phabricator.com/D1881
Summary:
Adds a macro handler that spams your channel with macros. Config is:
- macro.size: scale macros to this size before rasterizing
- macro.sleep: sleep this many seconds between lines (evade flood protection)
Test Plan: derpderp
Reviewers: kdeggelman, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1838
Summary:
This adds a new configuration setting:
"notification.actions" : [
"commit",
"abandon",
"actions"
]
if not set, displays all actions, if is set, display only what is set to display
Test Plan: add the notification.actions settings and set accordingly
Reviewers: epriestley, zeeg
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1820
Summary:
A user reported that their install (on an unusual piece of hardware) was hitting this timeout. We don't need to be quite so stingy; just use the default 30s timeout.
Also remove some kind of sentence fragment since I no longer remember what it meant and it doesn't make sense.
Test Plan: This change resolved the issue.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1805
Summary: The docs say "http://www.domain.com/" but if you don't put "/api/" it fails. GOTCHA!
Test Plan: Removed "/api/", launched bot, it worked.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T935
Differential Revision: https://secure.phabricator.com/D1763
Summary: Added support for audit comment, concern, accept
Test Plan: Comment / Concern / Accept audit, and say "What's new?" in IRC
Reviewers: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1730
Summary:
Added phabot irc command to directly message a user rather than outputting in a
channel.
Syntax:
ex:
````Korvin, D1717```
results in phabot private messaging me the info on D1717
Test Plan: ##nick##, [DTPVF]n
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1717
Summary:
Added what's new flood protection and fixed array_push issues.
Also added rhetoric for "Commit"
Test Plan: say "What's new?" twice within one minute
Reviewers: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1684
Summary:
Added "What's new?" to the ircbot
====Matches
```What is new?
What's new?
Whats new```
Test Plan:
<`Korvin> what is new?
<korvinbot-local> Derpen created D1: Herped the derp - http://phabricator.net/D1
It shows five.
Reviewers: epriestley
Reviewed By: epriestley
CC: epriestley, aran
Differential Revision: https://secure.phabricator.com/D1666
Summary:
This is pretty simple and unpolished, but it's getting pretty big and it seems
like a reasonable starting point.
- Log chat in various "channels".
- Conduit record and query methods.
- IRCBot integration for IRC logging
Major TODO:
- Web UI is really unpolished and has no search, paging, anchor-linking, etc.
Basically all presentation stuff, though.
- I think the bot should have a map of channels to log with channel aliases?
- The "channels" should probably be in a separate table.
- The "authors" should probably be correlated to Phabricator accounts somehow,
where possible.
Test Plan: Used phabotlocal to log #phabricator.
Reviewers: kdeggelman, btrahan, Koolvin
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T837
Differential Revision: https://secure.phabricator.com/D1625
Summary: posix may not be loaded on the web/cgi SAPI but we call posix functions
on this pathway, which we hit on /daemon/. Fall back to exec if we don't have
posix.
Test Plan: Added "&& false" and verified the page executed a bunch of "ps"
tests.
Reviewers: Koolvin, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T821
Differential Revision: https://secure.phabricator.com/D1540
Summary: We currently allow you to launch abstract daemons; use
setConcreteOnly() to only list/launch concrete daemons.
Test Plan: Ran "phd list" (no abstract daemons listed), "phd launch
PhabricatorRepositoryCommitDiscoveryDaemon" (reasonable error message).
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T801
Differential Revision: https://secure.phabricator.com/D1487
Summary: When we try to kill a daemon but discover it isn't running, we should
remove the PID file. We can also simplify the logic here.
Test Plan: Ran "phd stop" a couple of times, subsequent runs did not try to stop
a legion of dead daemons.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T781
Differential Revision: https://secure.phabricator.com/D1421
Summary: When private messaged, the bot responds via private message to the
sender, instead of sending a private message to itself.
Test Plan: Mentioned tasks in public channels and private messages.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Maniphest Tasks: T274
Differential Revision: https://secure.phabricator.com/D1350
Summary: Simple notificaiton handler that reads the difx event timeline and
posts notifications to IRC.
Test Plan: Ran it in #phabricator.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Differential Revision: https://secure.phabricator.com/D1337
Summary:
It used to be more useful for daemons to spew random debugging information, but
features like "phd debug" and some fixes to error reporting like D1101 provide
better ways to debug, test, develop and diagnose daemons.
- Stop writing "." every time MetaMTA sends a message.
- Stop spewing the entire IRC protocol from the IRC bot unless in debug mode.
- Stop writing GC daemon log entries about collecting daemon logs (DURRR)
unless in debug mode.
Test Plan: Ran daemons in debug and non-debug modes, got expected level of
noisiness.
Reviewers: jungejason, nh, btrahan
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: https://secure.phabricator.com/D1268
Summary: Allow the bot to answer the question "where is X?", where X is a
symbol.
Test Plan:
phabotlocal joined the chat room.
epriestley: phabotlocal: where is DarkConsole?
phabotlocal left the chat room. (Remote host closed the connection)
phabotlocal joined the chat room.
epriestley: phabotlocal: where is DarkConsole?
phabotlocal left the chat room. (Remote host closed the connection)
phabotlocal joined the chat room.
epriestley: phabotlocal: where is DarkConsole?
phabotlocal: class DarkConsole (php):
http://local.aphront.com/diffusion/SUBC/browse/src/aphront/console/api/DarkConsole.php$22
epriestley: thanks phabotlocal that is vastly more useful
phabotlocal left the chat room. (Remote host closed the connection)
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T315
Differential Revision: https://secure.phabricator.com/D1261
Summary: There are currently two files, but all scripts require both of them,
which is clearly silly. In the longer term I want to rewrite all of this init
stuff to be more structured (e.g., merge webroot/index.php and __init_script__
better) but this reduces the surface area of the ad-hoc "include files" API we
have now, at least.
Test Plan:
- Grepped for __init_env__.php (no hits)
- Ran a unit test (to test unit changes)
- Ran a daemon (to test daemon changes)
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: 976
Summary:
This is a pretty bad, but working implmentation of a way to kill one particular PID that
is controlled by Phabricator. Also remove the second 'stop' from the ##phd help## list.
Test Plan:
[ricky@rhelpad01 phabricator] (phd-stop-twice)$ ./bin/phd status
PID Started Daemon
30154 Oct 1 2011, 2:38:08 AM PhabricatorMetaMTADaemon
30172 Oct 1 2011, 2:38:09 AM PhabricatorMetaMTADaemon
30190 Oct 1 2011, 2:38:09 AM PhabricatorMetaMTADaemon
30210 Oct 1 2011, 2:38:09 AM PhabricatorMetaMTADaemon
[ricky@rhelpad01 phabricator] (phd-stop-twice)$ ./bin/phd stop 30190
Stopping daemon 'PhabricatorMetaMTADaemon' (30190)...
Daemon 30190 exited normally.
[ricky@rhelpad01 phabricator] (phd-stop-twice)$ ./bin/phd stop 123456
123456 is not controlled by Phabricator. Not killing.
[ricky@rhelpad01 phabricator] (phd-stop-twice)$ ./bin/phd stop
Stopping daemon 'PhabricatorMetaMTADaemon' (30154)...
Stopping daemon 'PhabricatorMetaMTADaemon' (30172)...
Stopping daemon 'PhabricatorMetaMTADaemon' (30210)...
Daemon 30210 exited normally.
Daemon 30154 exited normally.
Daemon 30172 exited normally.
Reviewers: epriestley
CC:
Differential Revision: 975
Summary: Shows events which a page dispatched, plus all the registered
listeners.
Test Plan:
Pretty basic for now, but works OK:
https://secure.phabricator.com/file/view/PHID-FILE-49fcd23081ce55cf9369/
(I also made it dispatch some dummy events to verify they show up.)
Reviewers: aran
Reviewed By: aran
CC: aran
Differential Revision: 973
Summary: Do JOIN in the protocol handler, after we receive 376 ("end of motd").
Test Plan: Ran bot, it joined a channel after receieving a 376 command.
Reviewers: moos3, codeblock, aran, jungejason, tuomaspelkonen
Reviewed By: moos3
CC: aran, moos3
Differential Revision: 855
"user":"authenticationusername",
"pass":"thisuserspassowrd",
This will allow people with internal irc servers to use this if they control access from ldap for irc.
Summary: This has to table scan a ginormous table right now, give it a fighting
chance with a more usable key.
Test Plan:
- Launched GC daemon, no errors.
- Used test console to create a new transcript.
- Viewed some old transcripts.
- Ran EXPLAIN on the SELECT and verified it was utilizing the garbageCollected
key.
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, epriestley, jungejason
Differential Revision: 735
Summary:
Add the differential parse cache to the GC. This is the largest object in the
system by a wide margin, I think.
This table is potentially gigantic which is why the script truncates it before
doing a schema change.
Test Plan: Ran the GC daemon, it cleaned up some parse caches.
Reviewed By: jungejason
Reviewers: tuomaspelkonen, jungejason, aran
Commenters: tuomaspelkonen
CC: aran, jungejason, tuomaspelkonen, epriestley
Differential Revision: 620
Summary:
Now that we store language with pastes, we can include this in Conduit.
Test Plan:
Tried it on a paste with a blank language, and one with a specified language.
16:14:50 <@CodeBlock> P1
16:14:51 <@codeblock-phabot> P1: http://phabricator.local/P1 - test.php
16:15:05 <@CodeBlock> P43
16:15:06 <@codeblock-phabot> P43: http://phabricator.local/P43 - sadoijfoisaf (php)
Reviewers:
epriestley, Ttech
CC:
Differential Revision: 616
Summary:
Phabricator generates a bunch of data that we don't need to keep around forever,
add a GC daemon to get rid of it with some basic configuration options.
This needs a couple more diffs to get some of the details but I think this is a
reasonable start.
I also fixed a couple of UI things related to this, e.g. the daemon logs page
going crazy when a daemon gets stuck in a loop and dumps tons of data to stdout.
Test Plan:
- Ran gc daemon in 'phd debug' mode and saw it delete stuff, then sleep once
it had cleaned everything up.
- Mucked around with TTLs and verified they work correctly.
- Viewed gc'd transcripts in the web interface and made sure they displayed
okay.
- Viewed daemon logs before/after garbage collection.
- Running some run-at / run-for tests now, I'll update if the daemon doesn't
shut off in ~10-15 minutes. :P
Reviewed By: tuomaspelkonen
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, tuomaspelkonen, epriestley
Differential Revision: 583
Summary: When the remote closes the connection, phabot goes into a busy loop
because of PHP's "nothing should ever be an error" semantics. Instead, detect
connection termination.
Test Plan: Disabled the "PONG" response in the protocol handler and let freenode
disconnect phabot. It spun out of control before, now it detects the issue and
exits to await automatic restart.
Reviewed By: jungejason
Reviewers: codeblock, jungejason, aran, tuomaspelkonen
CC: aran, jungejason
Differential Revision: 582
Summary:
Summarize (or at least link to) pastes when P<id> is given in a channel. This depends on D552!
Test Plan:
04:34:03 <@codeblock-phabot> P15 - http://phabricator.local/P15
04:35:22 <@CodeBlock> P1 asdf foo Bar Baz Diet Sprite P4
04:35:24 <@codeblock-phabot> P1 - http://phabricator.local/P1
04:35:24 <@codeblock-phabot> P4 - http://phabricator.local/P4
Reviewers:
epriestley
CC:
Differential Revision: 553
Summary:
Maniphest tasks can now be summarized by referencing their respective T<id> in irc.
Test Plan:
03:29:28 <@CodeBlock> T218
03:29:29 <@codeblock-phabot> T218: NYANCAT (Priority: Wishlist) - https://secure.phabricator.com/T218
03:30:14 <@CodeBlock> T58 asdf foo bar baz mcFoo T163
03:30:15 <@codeblock-phabot> T58: Allow AphrontFormView to render as a <div /> instead of a form (Priority: Wishlist) - https://secure.phabricator.com/T58
03:30:15 <@codeblock-phabot> T163: arc amend is slow (Priority: Needs Triage) - https://secure.phabricator.com/T163
...
03:28:23 <@CodeBlock> Oh. Hah, I'm testing against production Conduit. Ah well.
03:28:40 <@CodeBlock> I don't always test my code...but when I do, I do it in prod! :D
Reviewers:
epriestley
CC:
Differential Revision: 551
Summary:
The web console already correctly checks for processes which are running but
can't be signaled. Share this check in the CLI.
Test Plan:
Looked at the web console. Poked at the CLI.
Reviewed By: fratrik
Reviewers: fratrik
CC: aran, fratrik
Differential Revision: 544
Summary:
Currently we send logs to the logfile in 'phd debug', but we should send them to
the console instead.
Also fixed some %C stuff which could theoretically cause problems if a user had
percentage symbols in their paths (heaven forbid).
fratrik, this or D535 might have been involved in frustrating your efforts to
debug the "sudo" stuff.
Test Plan:
Ran "phd debug irc derpderp" and "phd launch irc derpderp". In the former case,
the exception appeared in the console. In the latter, it appeared in the log.
Reviewed By: codeblock
Reviewers: codeblock, jungejason, tuomaspelkonen, aran, fratrik
CC: aran, codeblock
Differential Revision: 536
Summary:
Tweaks to the paste app:
- I realized that unlike all the other apps, it makes more sense for the
default view of this one to be "create paste" instead of "list pastes" since
when you access the application directly you are most often wanting to share
something. Swap list out of the default slot and make edit the default.
- Make the textarea bigger (usability).
- Allow you to copy an existing paste.
- Implement 'raw view'.
- Tweak/adjust list view (usability, formatting).
- Tweak page titles.
Test Plan:
Created, copied, and listed pastes. Viewed raw paste. Created an invalid paste.
Tried to create a copy of a nonexistant paste.
Reviewed By: codeblock
Reviewers: codeblock, jungejason, aran, tuomaspelkonen
CC: aran, epriestley, codeblock
Differential Revision: 456
Summary:
Nicks can contain more characters than were allowed. The new regex is ugly,
but should include most of them.
Test Plan:
Joined the bot as phabot-c0d`eb1^ock successfully.
Reviewers:
epriestley
CC:
Differential Revision: 453
Summary:
Make it easier to find obvious problems in daemons by letting them run
undaemonized in the console without requiring the user to know the magical
incantations for loading libraries, etc.
Test Plan:
Ran "phd debug nice", simulated some failures (e.g., bringing down Phabricator,
daemon fatal) and got useful error messages.
Reviewed By: jungejason
Reviewers: toulouse, jungejason, tuomaspelkonen, aran
CC: aran, jungejason
Differential Revision: 448
error message if that doesn't work
Summary:
This workflow is needlessly bad right now, make it not terrible.
Also removed some related, unused code.
Test Plan:
Ran 'phd launch nice' with no directory and with a failing mkdir command.
Reviewed By: toulouse
Reviewers: hsb, toulouse, codeblock
CC: aran, toulouse
Differential Revision: 440
Summary:
Keep him from getting killed every 24 hours by the overseer, add basic commit
support.
Test Plan:
Ran irc bot, fed him a commit, fed him "http://blah/D1".
Reviewed By: aran
Reviewers: aran, jungejason, tuomaspelkonen, codeblock, mroch
CC: aran, epriestley
Differential Revision: 377
Summary:
I need to add some more conduit methods / info to make this at all useful but
here's some basics.
Test Plan:
Hung out in #phabot-test
Reviewed By: mroch
Reviewers: mroch, codeblock, aran, jungejason, tuomaspelkonen
CC: aran, mroch, epriestley
Differential Revision: 300
Summary:
Allow construction of handlers which use Conduit.
Test Plan:
Made a bot that connects to local and runs conduit.ping.
Reviewed By: mroch
Reviewers: mroch, codeblock, aran, jungejason, tuomaspelkonen
CC: aran, mroch
Differential Revision: 299
Summary:
Get rid of the Phabricator-level DarkConsole-specific API and use the more
general Phutil-level one.
Test Plan:
Loaded DarkConsole services plugin, viewed Diffusion, got execs in the trace.
Reviewed By: aran
Reviewers: aran, jungejason, tuomaspelkonen
CC: aran
Differential Revision: 293
Summary:
This is sort of a silly/fun project but I think there's some utility. For
example, mroch added some handlers to an eggdrop or something similar to look
for "D12345" and print out the title/link, which was actually pretty useful.
We could also add logging here and subsume the more-or-less unowned Facebook
tool that does the same thing, especially since we can get a bunch of good stuff
it doesn't support (like search) more or less for free.
This is also an easy way to provide some example code for writing Conduit system
agents.
This is a minimal implementation which creates a bot that connects to a
hard-coded server and sits there indefinitely. Next steps:
- Add conduit/sysagent support
- Write differential/maniphest/diffusion handlers
- Move configuration to the web interface (?) and integrate with phd
- Write a logging handler?
Test Plan:
Ran bot with "exec_daemon.php", it connected to the hard-coded server and sat
there indefinitely.
Reviewed By: aran
Reviewers: codeblock, mroch, tuomaspelkonen, aran, jungejason
CC: aran, epriestley
Differential Revision: 283
Summary: add --load-phutil-library for libraries other than phabricator
and libphutil.
Test Plan: launch a daemon in facebook such as
PhabricatorDifferentialCommentDaemon.
Reviewers: epriestley, tuomaspelkonen
CC:
Differential Revision: 146
Summary: See D133. Workers can also be subject to the same race, invert the
row relationship in the same way.
Test Plan: Launched repository master daemons and some taskmasters and used
the Daemon console to veify that they were able to process tasks. Manually
checked the database to make sure data got linked correctly and that new data
was inserted correctly.
Reviewers: jungejason
CC: tuomaspelkonen
Differential Revision: 135
Summary: While I should fix the transactional stuff, that patch is going to be
tricky and transactions have some performance implications. This is a simple
fix which prevents the race.
Instead of having the data point at the event ID, have the event point at a
data ID. Insert the data first, then insert the event with the right data
pointer. This is super simple and prevents the race issue.
Test Plan:
- Ran the schema upgrade script, verified that the database was
correctly upgraded. Was also prompted to stop daemons.
- Ran 'repository-launch-master', verified that the discovery daemons were
able to discover new commits and insert events for them. Verified the
committask daemon was consuming events and converting them into tasks.
- Verified new tasks looked correct in the database.
- Browsed web interface.
Reviewers: jungejason
CC: tuomaspelkonen
Differential Revision: 133
Summary: Basic scaffolding for repository tracking, plus daemon infrastructure
(Timelines, Cursors) and some fixes (memory usage, mysql_connect() junk).
Test Plan: parsed Javelin git commit history via daemon
Reviewers:
CC:
