Summary: Ref T13513. On `secure`, I caught an issue where inlines may be accessed directly before they're constructed. Instead, access them through the relevant accessor.
Test Plan: Will deploy.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21263
Summary:
Ref T13513. The on-hover-inline reticle has switched over to have cell-based behavior. Switch the on-hover-line-number reticle to use the same behavior.
Also, clean up the dirty/redraw loop slightly: we no longer need to dirty on resize, and we don't need to redraw if the range isn't actually dirty.
Test Plan: Highlighted lines and line ranges. Hovered over inlines.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21262
Summary:
Ref T13513. See PHI1734, which raises a concern about the performance of large revisions near the 100-change threshold.
Currently, `getInlines()` is called whenever the scroll position transitions between two changesets, and it performs a relatively complicated DOM scan to lift inlines out of the document.
This shows up as taking a small but nontrivial amount of time in Firefox profiles and should be safely memoizable.
Test Plan:
- Under Firefox profiling, scrolled through a large revision.
- Before change: `getInlines()` appeared as the highest-cost thing we're explicitly doing on profiles.
- After change: `getInlines()` was no longer meaningfully represented on profiles.
- Created inlines, edited inlines, etc. Didn't identify any broken behavior.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21261
Summary:
Ref T13529. Now that instances can be renamed, an instance may have multiple valid SSH usernames and the preferred SSH username may not be the intenal instance name.
`PhacilitySiteSource` should already always set `diffusion.ssh-username` correctly, to the current preferred SSH username (which may be "new-name" after a rename from "old-name"), so we should never be able to reach this code without an accurate `diffusion.ssh-username` value available.
The code to resolve names into instances also already works for both "ssh old-name@..." and "ssh new-name@...".
So I believe this code has no beneficial effects and only causes harm: it may force us to return "old-name" when falling through would correctly return "new-name".
Test Plan:
- Previously: renamed an instance, then SSH'd to it using both the old and new names. Both work.
- Previously: verified that `diffusion.ssh-username` is set correctly after a rename.
- Verified that Diffusion "Clone" UI now shows "new-name" after an instance rename.
- The real question here is: does this break something I'm not thinking of? And the change probably has to go to production to answer that.
Maniphest Tasks: T13529
Differential Revision: https://secure.phabricator.com/D21259
Summary:
Ref T13513. The way I'm highlighting lines won't work for Jupyter notebooks or other complex content blocks, and I don't see an obvious way to make it work that's reasonably robust.
However, we can just ignore the range behavior for complex content and treat the entire block as selected. This isn't quite as fancy as the source behavior, but pretty good.
Also, adjust unified diff behavior to work correctly with highlighting and range selection.
Test Plan:
- Used range selection in a Jupyter notebook, got reasonable behavior (range is treated as "entire block").
- Used range selection in a unified diff, got equivalent behavior to 2-up diffs.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21257
Summary:
Ref T13513. Give selected inlines a selection state and visual cues which are similar to the changeset selection state.
Also fix a couple of minor issues with select interactions and offset comments.
Test Plan: Selected inlines, saw obvious visual cues.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21256
Summary: Ref T13513. Currently, clicking inline or changeset headers eats the click events. This doesn't serve any clear purpose, and means these clicks do not clear text selections from the document, which is unusual.
Test Plan:
- Selected some text in a diff.
- Clicked a changeset header to select it.
- Before patch: text selection and context menu were retained.
- After patch: text selection was cleared and context menu was dismissed.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21255
Summary:
Ref T13513. In Safari, do this:
- view a 2-up diff with content on both sides;
- select more than one line on the right side; and
- use your mouse to click "New Inline Comment" in the context menu that pops up.
The mousedown event for the "New Inline Comment" click removes the "copy selection" behavior and creates a flash where both sides of the diff are selected.
This doesn't happen with (most) normal clicks because mouse down on a non-grabbable element clears the document selection.
To avoid this, don't reset the copy selection behavior if the user mouses down on an "<a />". This might not be robust, but seems simple and plausible as a fix.
Test Plan:
- See above.
- Before patch: flash of overbroad selection when clicking "New Inline Comment".
- After patch: no selection flash.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21254
Summary: Ref T13513. This fixes a bug where clicking a line number, then clicking "Cancel" causes the paths panel to briefly update with an extra inline comment counted on the file.
Test Plan:
- Clicked a line number.
- Typed some text.
- Clicked "Cancel".
- Before patch: paths panel flashes "1".
- After patch: paths panel stays stable.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21253
Summary:
Ref T13513. Currently, when creating an inline by selecting a line range, slightly careless handling leads to an inline with "0" offsets (by passing "undefined" to the server). This causes the block to highlight every line except the last one as fully bright, which is incorrect.
An inline with "0" offsets and an inline with no offsets are different. Be more careful about passing offsets around and rendering them.
Test Plan:
- Used the line numbers to add an inline to lines 4-8 of a change.
- Hovered the inline.
- Saw all four lines marked as "dull"-highlighted (previously: three bright lines, one dull line).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21252
Summary:
Ref T13513. When a user selects a text range and uses "New Inline Comment" to create a comment directly from a range, store the offset information alongside the comment.
When hovering the comment, highlight the original range.
Test Plan: {F7480926, size=full}
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21250
Summary:
Ref T13513.
- Firefox represents multiple selected rows as a discontinuous range. Accommodate this.
- Unified diffs don't have a "copy" marker. Do something sort-of-reasonable for them.
Test Plan:
- Selected multiple lines of content in Firefox, got an option to add a comment.
- Selected content in unified mode, got an option to add a comment.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21249
Summary: Ref T13513. Support direct text selection for inlines. This is currently just an alternate way to get to the same place as using line numbers, but can preserve offset/range information in the future.
Test Plan:
- Selected some text, hit "c", clicked "New Inline Comment", got sensible comments on both sides of a diff in Safari, Chrome, and (with limitations) Firefox.
- Caveats: no unified support, doesn't work across lines in Firefox.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21248
Summary: Ref T11401. Ref T13513. This paves the way for more comment actions, particularly an edit-after-submit action.
Test Plan: Took all actions from menus, via mouse and via keyboard (where applicable).
Maniphest Tasks: T13513, T11401
Differential Revision: https://secure.phabricator.com/D21244
Summary: See <https://github.com/phacility/phabricator/pull/854>. In some situations, `line-break: anywhere` produces better behavior than `word-break: break-all`. It never appears to produce worse behavior.
Test Plan:
- Break behavior changes if a line contains "<span />" elements caused by syntax highlighting. This CSS adjustment only appears to apply to text with internal "<span />" elements.
- This specifically impacts certain internal breakpoints adjacent to punctuation, so the test case is highly specific. Generic test cases with latin word characters do not evidence any behavioral changes.
- This change appears to have no impact on Safari, which uses the better behavior in all cases.
- Before Patch: In Firefox and Chrome, this specific change breaks awkwardly. There is more room for text to fit on the broken line:
Firefox
{F7480567}
Chrome
{F7480568}
- After Patch: Firefox and Chrome break the line better. Here's Firefox:
{F7480569}
- Additional context:
Safari Behavior (Unchanged)
{F7480570}
Chrome with no highlighting (desirable behavior). Firefox does the same thing.
{F7480571}
Also tested other cases, which seem never-worse in any browser.
{F7480574}
Differential Revision: https://secure.phabricator.com/D21247
Summary:
Ref T13454. See <https://discourse.phabricator-community.org/t/newly-created-ssh-private-keys-with-passphrase-not-working-anymore/3883>.
After changes to distinguish between invalid and passphrase-protected keys, SSH private key management code incorrectly uses "-y ..." ("print public key") when it means "-p ..." ("modify input file, removing passphrase"). This results in the command having no effect, and Passphrase stores the raw input credential, not the stripped version.
We can't recover the keys because we don't store the passphrase, so no migration here is really possible. (We could add more code to detect this case, but it's presumably rare.)
Also, correct the behavior of the "Show Public Key" action: this is available for users who can see the credential and does not require edit permission.
Test Plan:
- Created a new credential with a passphrase, then showed the public key.
Maniphest Tasks: T13006, T13454
Differential Revision: https://secure.phabricator.com/D21245
Summary:
Ref T13513. Currently, viewing a Jupyter document, hidden context just gets a plain "* * *" facade with no way to expand it.
Support click-to-expand, like source changes.
Test Plan:
- Clicked to expand various Jupyter diffs.
- Clicked to expand normal source changes.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21243
Summary:
Ref T13513. If you leave an inline on line 20 of a Jupyter document, we currently render context around *raw* line 20, which is inevitably some unrelated piece of JSON.
Instead, drop this context. (Ideal behavior would be to render context around Jupyter block 20, but that's a whole lot of work.)
Test Plan:
- On Jupyter changes and normal source changes, made and submitted inline comments, then viewed text and HTML mail.
- Saw no context on Jupyter comments (instead of bad context), and unchanged behavior (useful context) on normal source changes.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21242
Summary:
Ref T13513. Currently, "View as Document Type..." lists every available engine.
This is hard to get completely right because we can't always rebuild the document ref accurately in the endpoint, but try harder to fake something reasonable.
Test Plan: Used "View as Document Type..." on Jupyter notebooks, was given "Jupyter" and "Source" as options.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21241
Summary:
Ref T13513. As part of inline metadata, save the document engine the change is being rendered with.
This will allow other parts of the UI to detect that an inline was created on a Jupyter notebook but is being rendered on raw source, or whatever else.
The immediate goal is to fix nonsensical inline snippet rendering in email on Jupyter notebooks.
Test Plan:
- Created inlines and replies on normal soure code, saw no document engine annotated in the database.
- Created inlines and replies on a Jupyter notebook rendered in Jupyter mode, saw "jupyter" annotations in the database.
- Swapped document engines between Jupyter and Source, etc.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21240
Summary:
Ref T13513. If an intradiff has at least one unchanged file ("hasSameEffectAs()") or more than 100 files ("Large Change"), we hit this block and don't upcast storage inlines to runtime inlines. I missed this in testing.
Add the conversion step.
Test Plan: Viewed an intradiff with at least one unchanged file and at least one inline comment, saw correct rendering instead of fatal.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21239
Summary: Ref T13513. Currently, if you're editing a comment, "delete" doesn't put the comment into the correct state. This action is normally only reachable from comment previews, since an editing inline has no "delete" button.
Test Plan:
- Started editing an inline, clicked "Delete", got a deletion.
- Created an inline, typed text,
- Deleted a normal comment via preview.
- Deleted a normal comment via the on-inline action.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21238
Summary:
Ref T13513. Currently, clicking "View" from the inline comment preview (below the "add comment" area at the bottom of the page) only works if the inline isn't being edited.
Update this behavior so it works on inlines in either "Viewing" or "Editing" states.
Test Plan:
- Clicked "View" on a normal inline, got jumped/selected.
- Clicked "View" on an editing inline, got jumped/selected.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21237
Summary:
Ref T13513. Currently:
- If you click the "Show Changeset" button, your state change doesn't actually get saved on the server.
- It's hard to select a changeset path name for copy/paste because the "highlight the header" code tends to eat the event.
Instead: persist the former event; make the actual path text not be part of the highlight hitbox.
Test Plan:
- Clicked "Show Changeset", reloaded, saw changeset visibility persisted.
- Selected changeset path text without issues.
- Clicked non-text header area to select/deselect changesets.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21236
Summary:
Ref T13513. Currently, if you:
- click a line to create an inline;
- type some text;
- wait a moment; and
- close the page.
...you don't get an "Unsubmitted Draft" marker in the revision list.
Lift all the draft behavior to "InlineController" and make saving a draft dirty the overall container draft state.
Test Plan:
- Took the steps described above, got a draft state marker.
- Created, edited, submitted, etc., inlines in Diffusion and Differential.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21235
Summary: Ref T13513. All queries now go through a reasonably minimal set of pathways and should have consistent behavior.
Test Plan:
- Loaded a revision with inlines.
- Created a new empty inline, reloaded page, saw it vanish.
- Created a new empty inline, typed draft text, did not save, reloaded page, saw draft present.
- Created a new empty inline, typed draft text. Submitted feedback, got prompt, answered "Y", saw draft text submit.
- Created a new empty inline, typed draft text, scrolled down to bottom of page, typed non-draft text, saw preview include draft text.
- Marked and submitted "Done".
- Used hide/show on inlines, verified state persisted.
- Did much of the same stuff in Diffusion, where it all works the same way (except: there's no prompt when submitting draft is-editing inlines).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21234
Summary: Ref T13513. Replaces "DifferentialInlineCommentQuery" with the similar but more modern "DifferentialDiffInlineCommentQuery".
Test Plan: Viewed comments in timeline, changesets. Created, edited, and submitted comments. Hid and un-hid comments, reloading (saw state preserved).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21233
Summary: Ref T13513. Continue removing usage sites for the obsolete "DifferentialInlineCommentQuery".
Test Plan: Viewed the inline list in Differential, saw sensible inlines.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21232
Summary: Ref T13513. Move querying to "DiffInlineCommentQuery" classes and lift them into the base Controller.
Test Plan: In Differential and Diffusion, created, edited, and submitted inline comments.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21231
Summary: Ref T13513. Another step closer to the light.
Test Plan: Created, edited, deleted, replied to, and submitted inline comments in Diffusion.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21230
Summary: Ref T13513. Continue marching toward coherent query pathways for all access to inline comments.
Test Plan:
- Viewed a commit and a path within that commit, as a user with unpublished inlines and a different user.
- Saw appropriate inlines in all cases (published inlines, plus undeleted unpublished inlines authored by the current viewer).
- Grepped for "loadDraftAndPublishedComments()".
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21228
Summary:
Ref T13513. Improve consistency and robustness of the "InlineComment" queries.
The only real change here is that these queries now implicitly add a clause for selecting inlines ("pathID IS NULL" or "changesetID IS NULL").
Test Plan: Browed, created, edited, and submitted inlines.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21227
Summary:
Ref T13513. Currently, inline storage objects ("TransactionComment") can't directly generate a runtime object ("InlineComment").
Allow this transformation to be performed in a genric way so clunky code which does it per-object-type can be removed, lifted, or simplified.
Simplify an especially gross callsite in preview code.
Test Plan: Previewed inline comments.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21226
Summary: Ref T13513. See that task for some discussion. This prepares to lift "loadUnsubmittedInlineComments(...)" into shared code.
Test Plan: Grepped for callers, found none in the upstream. This is a backward compatibilty break. See T13513.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21225
Summary: Ref T13513. This controller was obsoleted by EditEngine and appears unreachable without explicitly typing the URL.
Test Plan:
- Grepped for the route, didn't find any hits.
- Deleted the controller, successfully previewed comments in Diffusion.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21224
Summary:
Ref T13519. This is a little fuzzy, but I think the workflow here is:
- View an intradiff, generating an ephemeral comparison changeset with no changeset ID. This produces a state key of "*".
- Apply "hidden" state changes to the changeset.
- View some other intradiff and/or diff view.
- The code attempts to use "*" as a changset ID?
I'm not entirely sure this is accurate; this was observed in production and I couldn't get a clean reproduction case locally.
Optimistically, try making changeset IDs explicit rather than relying on state keys to be "usually changeset-ID-like".
Test Plan: Used "hidden" locally across multiple intradiffs, but I wasn't cleanly able to reproduce the initial issue.
Maniphest Tasks: T13519
Differential Revision: https://secure.phabricator.com/D21223
Summary: See D21213. If there's no matching element, `findAbove()` throws. Handle these cases correctly.
Test Plan: Visited `#toc` on a revision, no longer saw a JS error.
Differential Revision: https://secure.phabricator.com/D21222
Summary: Ref T13523. If a file hasn't been touched in the newer changeset, we can currently hit an error in the interdiff.
Test Plan:
- Touched "moo.txt" in Diff 1.
- Reverted the changes to "moo.txt" in Diff 2.
- Diffed 2 vs 1.
- Before patch: fatal (call to getFilename() on null).
- After patch: clean interdiff.
Maniphest Tasks: T13523
Differential Revision: https://secure.phabricator.com/D21220
Summary:
Ref T13513. Overloading "original text" to get "edit-on-load" comments into the right state has some undesirable side effects.
Instead, provide the text when the editor opens. This fixes a cancel interaction.
Test Plan:
- Create an inline, type text, don't save.
- Reload page.
- Cancel.
- Before: cancelled into empty state.
- After: cancelled into deleted+undo state.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21219
Summary: Ref T13513. When users choose to publish inlines, we want to publish the visible text, not the last "checkpointed" state.
Test Plan:
- Created an inline ("AAA").
- Edited it into "BBB", did not save.
- Submitted.
- Confirmed that I want to publish the unsaved inline.
- Saw "BBB" publish.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21218
Summary:
Ref T13513. This is a bit clumsy, but the cleanest way to implement "isEditing" inlines today is to send them down as normal inlines and then simulate clicking "edit" on them.
When we do, don't focus the resulting editor: focusing it makes the page scroll around and highlight things in essentially random order as the editors load in.
Test Plan: Reloaded a page with some open editors, wasn't scrolled to them.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21217
Summary:
Ref T13513. As users type text into inline comments, save the comment state as a draft on the server.
This has some rough edges, particularly around previews, but mostly works. See T13513 for notes.
Test Plan: Started an inline, typed some text, waited a second, reloaded the page, saw an editing inline with the saved text.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21216
Summary: Ref T13513. When computing whether a revision has draft comments or not, ignore empty inlines.
Test Plan: Added empty inlines to a revision, no longer saw a yellow "draft" bubble in the list UI.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21215
Summary: Ref T13513. When you load a changeset, discard all empty inlines. This is likely a more desirable behavior than keeping empty editors around, even though the rest of the pipeline generally handles them fairly well now.
Test Plan:
- Started an inline, didn't type any text or save, reloaded page.
- Before: page restores empty editor in the same place.
- After: we just discard this likely-pointless empty inline.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21214
Summary: Ref T13513. Refine some inline behaviors, see test plan.
Test Plan:
- Edit a comment ("A"), type text ("AB"), cancel, edit.
- Old behavior: edit and undo states (wrong, and undo does not function).
- New behavior: edit state only.
- Edit a comment ("A"), type text ("AB"), cancel. Undo ("AB"), cancel. Edit.
- Old behavior: "AB" (wrong: you never submitted this text).
- New behavior: "A".
- Create a comment, type text, cancel.
- Old behavior: counter appears in filetree (wrong, comment is undo-able but should not be counted).
- New behavior: no counter.
- Cancel editing an empty comment with no text.
- Old behavior: Something buggy -- undo, I think?
- New behavior: it just vanishes (correct behavior).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21212
Summary:
Ref T13513. Currently, if you start an inline and then submit overall comments, we publish an empty inline. This is literally faithful to what you did, but almost certainly not the intent.
Instead, simply ignore empty inlines at publishing time (and ignore "done" state changes for those comments).
We could delete them outright, but if we do, they'll break if you have another window open with the empty inline (since the stored comment won't exist anymore). At least for now, leave them in place.
Test Plan: Created empty inlines, submitted comments, no longer saw them publish.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21211
Summary: Ref T13513. This slightly expands the existing-but-hacky "warning" workflow to cover both "mentions on draft" and "submitting inlines being edited".
Test Plan:
- Submitted changes to a revision with mentions on a draft, inlines being edited, both, and neither.
- Got sensible warnings in the cases where warnings were appropriate.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21191
Summary:
Ref T13513. If you submit top-level comments while an inline comment editor is open, kick the comment out of the editing state.
(An improvement to this behavior would be to warn the user that we're going to do this first, but this is currently less straightforward.)
Test Plan:
- Clicked a line number to create an inline.
- Type text, save, click edit.
- (Optional: reload page.)
- Save changes overall using the form at the bottom of the page.
- Outcome: published inline is no longer in an "editing" state.
Weirdness:
- If you click a line number (and, optionally, type text), then submit without using "Save", the server-side version of the inline has no content.
- This gives you a no-effect warning. Instead, these inlines should probably just be marked as deleted somewhere in the pipeline.
- This saves the last "Saved" copy of the inline. That's (probably?) desired, but somewhat destructive without a warning.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21188
