Summary:
Fixes T12460. Also ":)", ":(", ":/", and oldschool ":-)" variants.
Not included are variants with actual letters (`:D`, `:O`, `:P`) and obscure variants (`:^)`, `:*)`).
Test Plan: Typed `:3` (no emoji summoned). Typed `:dog3` (emoji summoned). Typed `@3` (user autocomplete summoned).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12460
Differential Revision: https://secure.phabricator.com/D17577
Summary:
Ref T12450. The way that config repair and setup issues interact is kind of complicated, and if `cluster.search` is invalid we may end up using `cluster.search` before we repair it.
I poked at things for a bit but wasn't confident I could get it to consistently repair before we use it without doing a big messy change.
The only thing that really matters is whether "type" is valid or not, so just put a slightly softer/more-tailored check in for that.
Test Plan:
- With `"type": "elastic"`, loaded setup issues.
- Before patch: hard fatal.
- After patch: softer fatal with more useful messaging.
{F4321048}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17576
Summary:
Ref T12450. Normally, we validate config when:
- You restart the webserver.
- You edit it with `bin/config set ...`.
- You edit it with the web UI.
However, you can also change config by editing `local.json`, `some_env.conf.php`, a `SiteConfig` class, etc. In these cases, you may miss config warnings.
Explicitly re-run search config checks from `bin/search`, similar to the additional database checks we run from `bin/storage`, to try to produce a better error message if the user has made a configuration error.
Test Plan:
```
$ ./bin/search init
Usage Exception: Setting "cluster.search" is misconfigured: Invalid search engine type: elastic. Valid types are: elasticsearch, mysql.
```
Reviewers: chad, 20after4
Reviewed By: 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17574
Summary:
Ref T12450. Minor cleanup:
- setRoles() has no callers.
- getRoles() has no callers (these two methods are leftovers from an earlier iteration of the change).
- The `hasRole()` logic doesn't work since nothing calls `setRole()`.
- `hasRole()` has only `isreadable/iswritable` as callers.
- The `isReadable()/isWritable()` logic doesn't work since `hasRole()` doesn't work.
Instead, just check if there are any readable/writable hosts. `Host` already inherits its config from `Service` so this gets the same answer without any fuss.
Also add some read/write constants to make grepping this stuff a little easier.
Test Plan:
- Grepped for all removed symbols, saw only newer-generation calls in `Host`.
- See next diff for use of `isWritable()`.
Reviewers: chad, 20after4
Reviewed By: 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17571
Summary:
Ref T12450. This is now pointless and just asserts that `cluster.search` has a default value.
We might restore a fancier version of this eventually, but get rid of this for now.
Test Plan: Scruitinized the test case.
Reviewers: chad, 20after4
Reviewed By: 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17573
Summary:
Ref T12450. This mostly just smooths out the text a little to improve consistency. Also:
- Use `isWritable()`.
- Make the "skipping because not writable" message more clear and tailored.
- Try not to use the word "index" too much to avoid confusion with `bin/search index` -- instead, talk about "initialize a service".
Test Plan: Ran `bin/search init` with a couple of different (writable / not writable) configs, saw slightly clearer messaging.
Reviewers: chad, 20after4
Reviewed By: 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17572
Summary:
[ ] Write an "Upgrading: ..." guidance task with narrow instructions for installs that are upgrading.
[ ] Do we need to add an indexing activity (T11932) for installs with ElasticSearch?
[ ] We should more clearly detail exactly which versions of ElasticSearch are supported (for example, is ElasticSearch <2 no longer supported)? From T9893 it seems like we may //only// have supported ElasticSearch <2 before, so are the two regions of support totally nonoverlapping and all ElasticSearch users will need to upgrade?
[ ] Documentation should provide stronger guidance toward MySQL and away from Elastic for the vast majority of installs, because we've historically seen users choosing Elastic when they aren't actually trying to solve any specific problem.
[ ] When users search for fulltext results in Maniphest and hit too many documents, the current behavior is approximately silent failure (see T12443). D17384 has also lowered the ceiling for ElasticSearch, although previous changes lowered it for MySQL search. We should not fail silently, and ideally should build toward T12003.
[ ] D17384 added a new "keywords" field, but MySQL does not search it (I think?). The behavior should be as consistent across MySQL and Elastic as we can make it. Likely cleaner is giving "Project" objects a body, with "slugs" and "description" separated by newlines?
[ ] `PhabricatorSearchEngineTestCase` is now pointless and only detects local misconfigurations.
[ ] It would be nice to build a practical test suite instead, where we put specific documents into the index and then search for them. The upstream test could run against MySQL, and some `bin/search test` could run against a configured engine like ElasticSearch. This would make it easier to make sure that behavior was as uniform as possible across engine implementations.
[ ] Does every assigned task now match "user" in ElasticSearch?
[x] `PhabricatorElasticFulltextStorageEngine` has a `json_encode()` which should be `phutil_json_encode()`.
[ ] `PhabricatorSearchService` throws an untranslated exception.
[ ] When a search cluster is down, we probably don't degrade with much grace (unhandled exception)?
[ ] I haven't run bin/search init, but bin/search index doesn't warn me that I may want to. This might be worth adding. The UI does warn me.
[ ] bin/search init warns me that the index is "incorrect". It might be more clear to distinguish between "missing" and "incorrect", since it's more comforting to users to see "everything is as we expect, doing normal first-time setup now" than "something is wrong, fixing it".
[ ] CLI message "Initializing search service "ElasticSearch"" does not end with a period, which is inconsistent with other UI messages.
[ ] It might be nice to let bin/search commands like init and index select a specific service (or even service + host) to act on, as bin/storage --ref ... now does. You can generally get the result you want by fiddling with config.
[ ] When a service isn't writable, bin/search init reports "Search cluster has no hosts for role "write".". This is accurate but does not provide guidance: it might be more useful to the user to explain "This service is not writable, so we're skipping index check for it.".
[x] Even with write off for MySQL, bin/search index --type task --trace still updates MySQL, I think? I may be misreading the trace output. But this behavior doesn't make sense if it is the actual behavior, and it seems like reindexAbstractDocument() uses "all services", not "writable services", and the MySQL engine doesn't make sure it's writable before indexing.
[x] Searching or user fails to find task Grant users tokens when a mention is created, suggesting that stemming is not working.
[x] Searching for users finds that task, but fails to find a task containing "per user per month" in a comment, also suggesting that stemming is not working.
[x] Searching for maniphest fails to find task maniphest.query elephant, suggesting that tokenization in ElasticSearch is not as good as the MySQL tokenization for these words (see D17330).
[x] The "index incorrect" warning UI uses inconsistent title case.
[x] The "index incorrect" warning UI could format the command to be run more cleanly (with addCommand(), I think).
refs T12450
Test Plan:
* Stared blankly at the code.
* Disabled 'write' role on mysql fulltext service.
* Edited a task, ran search indexer, verified that the mysql index wasn't being updated.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17564
Summary:
Ref T12272. If you own a package which owns "/", this allows you to force-accept package reviews for packages which own sub-paths, like "/src/adventure/".
The default UI looks something like this:
```
[X] Accept as epriestley
[X] Accept as Root Package
[ ] Force accept as Adventure Package
```
By default, force-accepts are not selected.
(I may do some UI cleanup and/or annotate "because you own X" in the future and/or mark these accepts specially in some way, particularly if this proves confusing along whatever dimension.)
Test Plan: {F4314747}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12272
Differential Revision: https://secure.phabricator.com/D17569
Summary: Ref T10967. This change is similar to D17566, but for rejects.
Test Plan:
- Create a revision as A, with reviewer B.
- Reject as B.
- Request review as A.
- Before patch: stuck in "rejected".
- After patch: transitions back to "needs review".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17568
Summary: Ref T10967. This moves all remaining "request review" pathways (just `differential.createcomment`) to the new code, and removes the old action.
Test Plan: Requested review on a revision, `grep`'d for the action constant.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17567
Summary:
Ref T10967. This is explained in more detail in T10967#217125
When an author does "Request Review" on an accepted revision, void (in the sense of "cancel out", like a bank check) any "accepted" reviewers on the current diff.
Test Plan:
- Create a revision with author A and reviewer B.
- Accept as B.
- "Request Review" as A.
- (With sticky accepts enabled.)
- Before patch: revision swithced back to "accepted".
- After patch: the earlier review is "voided" by te "Request Review", and the revision switches to "Review Requested".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17566
Summary: Before the speling pollice lock us in prisun.
Test Plan: Used a dicationairey.
Reviewers: chad, jmeador
Reviewed By: jmeador
Differential Revision: https://secure.phabricator.com/D17570
Summary:
This implements a simplistic `PhabricatorRepositoryFulltextEngine`
Currently only the repository name, description, timestamps and
status are indexed.
Note: I had to change the `search index` workflow to disambiguate
PhabricatorRepository from PhabricatorRepositoryCommit
Test Plan:
* ran `./bin/search index --type PhabricatorRepository --force`
* searched for some repositories. Saw reasonable results matching on either title or description.
* Edited a repository in the web ui
* Added unique key words to the repo description.
* I was then able to find that repo by searching for the new keywords.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Tags: #search, #diffusion
Differential Revision: https://secure.phabricator.com/D17300
Summary: Fixes T11641. We're overbroad here (and this may need more scoping?) but this seems to resolve the immediate issue.
Test Plan: Upload a few diffs and ask disabled accounts to comment on them inline.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11641
Differential Revision: https://secure.phabricator.com/D17565
Summary: General CSS and usability touchup of the Remarkup bar states for fullscreen and preview. Larger fonts, more spacing, some hint of the underlying page. Disable buttons that can't be used in preview mode.
Test Plan:
Formal test coming with mobile, browsers. This is a kick the tires upload.
{F4283448}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17563
Summary:
The goal is to make fulltext search back-ends more extensible, configurable and robust.
When this is finished it will be possible to have multiple search storage back-ends and
potentially multiple instances of each.
Individual instances can be configured with roles such as 'read', 'write' which control
which hosts will receive writes to the index and which hosts will respond to queries.
These two roles make it possible to have any combination of:
* read-only
* write-only
* read-write
* disabled
This 'roles' mechanism is extensible to add new roles should that be needed in the future.
In addition to supporting multiple elasticsearch and mysql search instances, this refactors
the connection health monitoring infrastructure from PhabricatorDatabaseHealthRecord and
utilizes the same system for monitoring the health of elasticsearch nodes. This will
allow Wikimedia's phabricator to be redundant across data centers (mysql already is,
elasticsearch should be as well).
The real-world use-case I have in mind here is writing to two indexes (two elasticsearch clusters
in different data centers) but reading from only one. Then toggling the 'read' property when
we want to migrate to the other data center (and when we migrate from elasticsearch 2.x to 5.x)
Hopefully this is useful in the upstream as well.
Remaining TODO:
* test cases
* documentation
Test Plan:
(WARNING) This will most likely require the elasticsearch index to be deleted and re-created due to schema changes.
Tested with elasticsearch versions 2.4 and 5.2 using the following config:
```lang=json
"cluster.search": [
{
"type": "elasticsearch",
"hosts": [
{
"host": "localhost",
"roles": { "read": true, "write": true }
}
],
"port": 9200,
"protocol": "http",
"path": "/phabricator",
"version": 5
},
{
"type": "mysql",
"roles": { "write": true }
}
]
Also deployed the same changes to Wikimedia's production Phabricator instance without any issues whatsoever.
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Tags: #elasticsearch, #clusters, #wikimedia
Differential Revision: https://secure.phabricator.com/D17384
Under some workloads, the taskmaster may hibernate and launch more rapidly
than it should. Require 15 seconds of inactivity before hibernating. Also
hibernate for longer.
Auditors: chad
The `min()` vs `max()` fix in D17560 meant that the Trigger daemon only
hibernates for 5 seconds, so we do a full GC sweep every 5 seconds. This ends
up eating a fair amount of CPU for no real benefit.
The GC cursors should move to persistent storage, but just bump this default
up in the meantime.
Auditors: chad
If we try to render an edge transaction which uses unknown edge constants,
it turns out we fatal. Degrade instead. This happened when viewing very old
badges.
Auditors: chad
Summary: Ships Badges. I can write up some basic docs too if needed.
Test Plan: /applications/
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17360
Summary: Ref T12270. These no longer have any callsites.
Test Plan: Used `grep` to search for each edge class constant, found no hits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17562
Summary: Ref T12270. Adds a pager, plus a few little cleanups from copy/paste and accumulated cruft.
Test Plan:
- Paginated a user with 180 badges.
- Viewed a user with 0 badges.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17561
Summary: Ref T12298. Like PullLocal daemons, this allows the last daemon in the pool to hibernate if there's no work to be done, and awakens the pool when work arrives.
Test Plan:
- Ran `bin/phd debug task --trace`.
- Saw the pool hibernate and look for tasks.
- Commented on an object.
- Saw the pool wake up and process the queue.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12298
Differential Revision: https://secure.phabricator.com/D17559
Summary:
Ref T11050. The old rule was "you can only resign if you're a reviewer".
With the new behavior of "resign", the rule should be "you can resign if you're a reviewer, or you have authority over any reviewer". Make it so.
Also fixes T12446. I don't know how to reproduce that but I'm pretty sure this'll fix it?
Test Plan:
- Could not resign from a revision with no authority/reviewer.
- Resigned from a revision with myself as a reviewer.
- Resigned from a revision with a package I owned as a reviewer.
- Could not resign from a revision I had already resigned from.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12446, T11050
Differential Revision: https://secure.phabricator.com/D17558
Summary:
Ref T12298. Two minor daemon improvements:
- Make the "waiting" message reflect hibernation.
- Don't trigger a reload right after launching.
Test Plan:
- Read "waiting" message.
- Ran "bin/phd start", didn't see an immediate SIGHUP in the log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12298
Differential Revision: https://secure.phabricator.com/D17550
Summary: Fixes T9363. This drops empty buckets from dashboard panel context. Still see full results in Audit.
Test Plan: Create an "Active Audits" panel, add to Dashboard. See no commits found. Check Audit, see all buckets.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9363
Differential Revision: https://secure.phabricator.com/D17545
Summary: Ref T9363, If we're in a dashboard panel, only show buckets with data, or a fallback if nothing exists.
Test Plan: Test 'active revisions' panel in a dashboard and in Differential.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9363
Differential Revision: https://secure.phabricator.com/D17544
Summary: Ref T12298. This allows the PullLocal daemon to hibernate like the Trigger daemon, but automatically wakes it back up when it needs to do something.
Test Plan:
- Ran `bin/phd debug pulllocal --trace`.
- Saw the daemon hibernate after doing a checkup on repositories.
- Saw periodic queries to look for new update messages.
- After clicking "Update Now" in the web UI to schedule an update, saw the daemon wake up immediately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12298
Differential Revision: https://secure.phabricator.com/D17540
Summary:
Ref T12444. A few issues:
- `x % (y - z)` doesn't generate values in the full range: the largest value is never generated. Instead, use `x % (1 + y - z)`.
- `digestToRange(1, count)` never generates 0. After fixing the first bug, it could generate `count`. The range of the arrays is `0..(count-1)`, inclusive. Generate the correct range instead.
- `unpack('L', ...)` can unpack a negative number on a 32-bit system. Use `& 0x7FFFFFFF` to mask off the sign bit so the result is always a positive integer.
- FileFinder might return arbitrary keys, but we rely on sequential keys (0, 1, 2, ...)
Test Plan:
- Used `bin/people profileimage ... --force` to regenerate images.
- Added some debugging to verify that the math seemed to be working.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12444
Differential Revision: https://secure.phabricator.com/D17543
Summary:
Fixes T12369. When you create objects they may technically be locked: either because the default state is legitimately locked, or because the default policies prevent you from viewing so we sort of technically end in a locked state.
Regardless, don't prompt during creation, since this prompt isn't useful even if the lock detection is completely legitimate.
Test Plan:
- In {nav Applications > Maniphest > Configure}, set "Default View Policy" to "No One".
- Tried to create a task.
- Before patch: prompted to override lock.
- After patch: no override prompt.
Reviewers: chad
Reviewed By: chad
Subscribers: d.maznekov
Maniphest Tasks: T12369
Differential Revision: https://secure.phabricator.com/D17541
Summary:
Ref T12271. Don't do anything with this yet, but store who accepted/rejected/whatever on behalf of reviewers.
In the future, we could use this to render stuff like "Blessed Committers (accepted by epriestley)" or whatever. I don't know that this is necessarily super useful, but it's easy to track, seems likely to be useful, and would be a gigantic pain to backfill later if we decide we want it.
Test Plan: Accepted/rejected a revision, saw reviewers update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12271
Differential Revision: https://secure.phabricator.com/D17537
Summary:
Ref T12271. Currenty, when you "Accept" a revision, you always accept it for all reviewers you have authority over.
There are some situations where communication can be more clear if users can accept as only themselves, or for only some packages, etc. T12271 discusses some of these use cases in more depth.
Instead of making "Accept" a blanket action, default it to doing what it does now but let the user uncheck reviewers.
In cases where project/package reviewers aren't in use, this doesn't change anything.
For now, "reject" still acts the old way (reject everything). We could make that use checkboxes too, but I'm not sure there's as much of a use case for it, and I generally want users who are blocking stuff to have more direct accountability in a product sense.
Test Plan:
- Accepted normally.
- Accepted a subset.
- Tried to accept none.
- Tried to accept bogus reviewers.
- Accepted with myself not a reviewer
- Accepted with only one reviewer (just got normal "this will be accepted" text).
{F4251255}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12271
Differential Revision: https://secure.phabricator.com/D17533
Summary: Hit this while `arc diff`'ing something which is triggering 2+ rules which add reviewers, I think.
Test Plan: Dug this out of a production stack trace; will push and `arc diff` again.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17534
Summary: Fixes T12439. This pathway was just missing a `setContinueOnMissingFields(...)` to skip enforcement of required fields.
Test Plan:
- Added a required custom field.
- Mentioned any task without a field value in a comment.
- Edited that comment.
- Saved changes.
- Before fix: fatal in log.
- After fix: clean edit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12439
Differential Revision: https://secure.phabricator.com/D17536
Summary: Fixes T11865. Part of a 'clean up remarkup' pass, removing Aleo helps simplify coding, is lighter on the wire, and gives a more consistent, clean look.
Test Plan: run celerity, grep for 'aleo' and 'Aleo', test Phriction, tasks
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11865
Differential Revision: https://secure.phabricator.com/D17535
Summary:
Ref T10967. I'm not 100% sure we need this, but the old edge table had it and I recall an issue long ago where not having this key left us with a bad query plan.
Our data doesn't really provide a way to test this key (we have many revisions and few reviewers, so the query planner always uses revision keys), and building a convincing test case would take a while (lipsum needs some improvements to add reviewers). But in the worst case this key is mostly useless and wastes a few MB of disk space, which isn't a big deal.
So I can't conclusively prove that this key does anything to the dashboard query, but the migration removed it and I'm more comfortable keeping it so I'm not worried about breaking stuff.
At the very least, MySQL does select this key in the query plan when I do a "Reviewers:" query explicitly so it isn't //useless//.
Test Plan: Ran `bin/storage upgrade`, ran dashboard query, the query plan didn't get any worse.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17532
Summary:
Fixes T11050. Today, when a user resigns, we just delete the record of them ever being a reviewer.
However, this means you have no way to say "I don't care about this and don't want to see it on my dashboard" if you are a member of any project or package reviewers.
Instead, store "resigned" as a distinct state from "not a reviewer", and treat it a little differently in the UI:
- On the bucketing screen, discard revisions any responsible user has resigned from.
- On the main `/Dxxx` page, show these users as resigned explicitly (we could just hide them, too, but I think this is good to start with).
- In the query, don't treat a "resigned" state as a real "reviewer" (this change happened earlier, in D17517).
- When resigning, write a "resigned" state instead of deleting the row.
- When editing a list of reviewers, I'm still treating this reviewer as a reviewer and not special casing it. I think that's sufficiently clear but we could tailor this behavior later.
Test Plan:
- Resigned from a revision.
- Saw "Resigned" in reviewers list.
- Saw revision disappear from my dashboard.
- Edited revision, saw user still appear as an editable reviewer. Saved revision, saw no weird side effects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11050
Differential Revision: https://secure.phabricator.com/D17531
Summary: Fixes T12434. I accidentally copy/pasted this too much in D17442.
Test Plan: Viewed a form edit page, no longer saw two copies of this action.
Reviewers: chad, cspeckmim
Reviewed By: chad, cspeckmim
Maniphest Tasks: T12434
Differential Revision: https://secure.phabricator.com/D17530
Summary: Ref T10390. Catch if the user doesn't have any dashboards they can edit and give them a helpful message instead.
Test Plan: Clean install, no dashboards, Click "Add to Dashboard" on ApplicationSearch results, see no dashboards message
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17528
Summary: Ref T10390. Dashboard usability is high enough that I think we should pin it by default for users to create custom home pages.
Test Plan: Review order of applications in sandbox.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17527
Summary: Ref T10390. Fixes the missing "fa-dashboard" icon and adds a few more for an even 25.
Test Plan: Create new dashboard, see dashboard icon, select new dashboard icon.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17526
Summary: Ref T10390. I find myself wanting to find dashboards I can edit, even if I am not the author. I think this is useful for larger installs with multiple admins. Also make disabled Dashboards more grey in UI results.
Test Plan: Log in a test user, create a dashboard with I cannot edit. Log into my account, search for editable dashboards and only see mine. Set dashboard to all users, search under test account and see editable dashboards.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17524
Summary: Ref T5307. Just makes the dialog a little easier to use. Picks a name if we already have one.
Test Plan: Test a builtin, custom saved, and a new advanced search (no name).
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5307
Differential Revision: https://secure.phabricator.com/D17523
Summary:
Ref T10967. Improves some method names:
- `Revision->getReviewerStatus()` -> `Revision->getReviewers()`
- `Revision->attachReviewerStatus()` -> `Revision->attachReviewers()`
- `Reviewer->getStatus()` -> `Reviewer->getReviewerStatus()` (this is mostly to make this more greppable)
Test Plan:
- bunch o' `grep`
- Browsed around.
- If I missed anything, it should fatal in an obvious way. We have a lot of other `getStatus()` calls and it's hard to be sure I got them all.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17522
