Summary:
Fixes T6787. I'm kind of cheating a little bit here by not unifying default selection with `initializeNew(...)` methods, but I figure we can let this settle for a bit and then go do that later. It's pretty minor.
Since we're not doing templates I kind of want to swap the `'template'` key to `'type'` so maybe I'll do that too at some point.
@chad, freel free to change these, I was just trying to make them pretty obvious. I //do// think it's good for them to stand out, but my approach is probably a bit inconsistent/heavy-handed in the new design.
Test Plan:
{F525024}
{F525025}
{F525026}
{F525027}
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: johnny-bit, joshuaspence, chad, epriestley
Maniphest Tasks: T6787
Differential Revision: https://secure.phabricator.com/D13387
Summary:
Ref T8095. Two general problems:
- I want Harbormaster to own all lint and unit test results.
- I don't want users to have to configure anything for `arc` to keep working automatically.
These are in conflict because generic lint/unit test ownership in Harbormaster requires that build targets exist which we can attach build results to. However, we can't currently create build targets on demand: Harbormaster assumes it is responsible for creating targets, then running code or making third-party service calls to actually run the builds.
I considered two broad approaches to let `arc` push results into Harbormaster without requiring administrators to configure some kind of "arc results" build plan:
# Add magic target PHIDs like `PHID-MAGIC-this-is-really-arc-unit`.
# Add new code to build real targets with real PHIDs.
(1) is probably a bit less work to get off the ground, but I think it's worse overall and very likely to create more problems in the long run. I particularly worry that it will lead to a small amount of special casing in a very large number of places, which seems more fragile.
(2) is more work upfront but I think does a better job of putting all the special casing in one place that we can, e.g., more reasonably unit test, and letting the rest of the code rarely/never care about this case since it's just dealing with normal plans/steps/targets as far as it can tell.
This diff introduces "autoplans", which are source templates for plans/steps. This let us "push" these targets into Harbormaster. Hypthetically, any process "like" arc can use autoplans to upload test/lint/etc results. In practice, probably only `arc` will ever use this, but I think it's still quite a bit cleaner than the alternative despite all the generality.
Workflow is basically:
- `arc` creates a diff.
- `arc` calls `harbormaster.queryautotargets`, passing the diff PHID and saying "I have some lint and unit results I want to stick on this thing".
- Harbormaster builds the plan, steps, and targets (if any of them don't already exist), and hands back the target PHIDs so `arc` has a completely standard-looking place to put results.
- `arc` uploads the test results to the right targets, as though Harbormaster had asked it to run unit/lint in the first place.
(This doesn't actually do any of that yet, just sets things up.)
I'll maybe doc turn that ^^^^^^ into a doc for posterity since I think it's hard to guess what an "autotarget" is, but I'm going to grab some lunch first.
Test Plan:
- Added unit tests to make sure we can build these things properly.
- Used `harbormaster.queryautotargets` to build autotargets for a bunch of diffs.
- Verified targets come up in "waiting for message" state.
- Verified plans and steps are not editable.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: hach-que, epriestley
Maniphest Tasks: T8095
Differential Revision: https://secure.phabricator.com/D13345
Summary: Ref T8099, Now that we have cleaner headers, we can add more pop to important items, like the state of an Object. This makes it easier to just note the color and generally understand the state of the object (closed, returned, accepted, open). @epriestley, I think you previously thought this was a bug, but if it still feels bad, let me know.
Test Plan:
Review Differential, Maniphest, Polls for various object states.
{F520973}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13369
Summary: Ref T8099. This adds a new class which all search engines return for layout. I thought about this a number of ways, and I think this is the cleanest path. Each Engine can return whatever UI bits they needs, and AppSearch or Dashboard picks and lays the bits out as needed. In the AppSearch case, interfaces like Notifications, Calendar, Legalpad all need more custom layouts. I think this also leaves a resonable path forward for NUX as well. Also, not sure I implemented the class correctly, but assume thats easy to fix?
Test Plan: Review and do a search in each application changed. Grep for all call sites.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13332
Summary:
Ref T8575. We run a big "(A) UNION (B)" query on the home page and on the main Differential page.
"A" can always be improved by using `%Ls`, so it can use the second half of the `(authorPHID, status)` key.
"B" can sometimes be improved if the fraction of open revisions is smaller than the fraction of revisions you are reviewing. This is true for me on secure.phabricator.com (I'm a reviewer, either directly or via 'Blessed Reviewers', on about 80% of revisions, but <5% are open). In these cases, a `(status, phid)` key is more efficient.
Test Plan: Tweaked queries and added keys on this server, saw less derpy query plans and performance.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8575
Differential Revision: https://secure.phabricator.com/D13325
Summary:
Fixes T5138. Some of the "revision" properties are really "diff" properties, but we only show the properties for the most recent / current diff.
- Immediately, this makes it hard or impossible to review, e.g., lint/unit results for older diffs.
- Longer-term, these limits will become more problematic with more data on diffs after Harbormaster.
Instead, separate "revision" from "diff" properties.
(In the long term, it might make sense to show more diffs in this panel -- e.g., tabs for the 8 most recent updates or something -- but I went with the simplest approach for now since I don't have a clean way to deal with 100-update revisions offhand.)
Test Plan: {F500480}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: cburroughs, epriestley
Maniphest Tasks: T5138
Differential Revision: https://secure.phabricator.com/D13282
Summary: All classes should extend from some other class. See D13275 for some explanation.
Test Plan: `arc unit`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13283
Summary: This `break` statement causes `./bin/hunks migrate` to only migrate one-hunk-at-a-time, which is unnecessary and slightly misleading. Instead, allow the script to migrate //all// legacy hunks to modern storage. In particular, this means that we can recommend that installs run this command sometime before D13222 is landed.
Test Plan: It's a pain to setup the data necessary to test this, but this is identical to the change that I made on our production install when I migrated our hunk storage.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13288
Summary:
Ref T5681. Ref T6860. This doesn't do anything interesting on its own, just makes the next diff smaller.
In the next diff, policies become aware of the types of objects they're acting on. We need to specify which object type all the "Default View/Edit" settings are for so they get the right rules.
For example, a rule like "Allow task author" is OK for "View Policy" on a task, and also OK for "Default View Policy" on ManiphestApplication. But it's not OK for "Can Create Tasks" on ManiphestApplication.
So annotate all the "template"/"default" policies with their types. The next diff will use these to let you select appropriate rules for the given object type.
Test Plan:
- Used `grep` to find these.
- This change has no effect.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5681, T6860
Differential Revision: https://secure.phabricator.com/D13251
Summary:
Ref T8455. Use standard effects for revisions, instead of a custom effect.
This fixes the major issue (conduit error) in T8455 because the standard effect now performs PHID type filtering.
This retains other behaviors (in particular: not re-CC'ing explicitly removed CCs).
Test Plan:
- With a Herald rule that adds a mailing list as a CC, created a revision before the change and hit the error in T8455. After the change, saw correct behavior.
- Wrote a normal Herald rule to add CCs and created a revision, saw it fire properly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8455
Differential Revision: https://secure.phabricator.com/D13183
Summary:
Ref T8455. The Herald code in general isn't nearly as modular as it should be, and the subscriber code particularly has some legacy cruft. This is making it fragile and causing the issue described in T8455.
Currently, each Herald adapter has essentially identical code which it uses to determine which users are subscribed to an object. Instead, share code between object types.
I removed "explicitCCs":
- The value was always identical to doing the query in the common/standard way.
- They were only used to print a diagnostic message on transcripts, which I think is no longer relevant.
- I believe it predates transactions, so when it was added you couldn't figure out the old object state by looking at the transaction history. Now, CC changes are recorded there, so there's no need to restate the CC state on the transcript.
- Even if we do want to restore this (or something similar), we can do it directly from Herald now.
Test Plan:
- Created rules that use the "CCs" field in Herald, Pholio, Maniphest and Differential.
- Updated objects in each application.
- Observed valid field reads in the tranascript.
- Grepped for `FIELD_CC`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8455
Differential Revision: https://secure.phabricator.com/D13177
Summary: Ref T8463.
Test Plan:
- Created a new revision via web UI with a username `@mention` in the summary and no repository.
- Prior to patch, hit a "not attached" error.
- After patch, no error.
- Created a new web UI revision, as above, but with a repository; saw repository work fine.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8463
Differential Revision: https://secure.phabricator.com/D13205
Summary: Remove the `*TransactionType` classes and define the constants in the corresponding `*Transaction` class instead.
Test Plan: `grep`
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D13188
Fixes this, which only triggers on some kinds of mail:
```
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] [2015-06-04 02:56:38] EXCEPTION: (PhutilProxyException) Error while executing Task ID 902251. {>} (PhabricatorDataNotAttachedException) Attempting to access attached data on DifferentialRevision (via getActiveDiff()), but the data is not actually attached. Before accessing attachable data on an object, you must load and attach it.
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] Data is normally attached by calling the corresponding needX() method on the Query class when the object is loaded. You can also call the corresponding attachX() method explicitly. at [<phabricator>/src/infrastructure/storage/lisk/PhabricatorLiskDAO.php:166]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] arcanist(head=master, ref.master=8c589f1f759f), phabricator(head=master, ref.master=6dede2e2c513), phutil(head=master, ref.master=afc05a9a7f00)
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] #0 <#2> PhabricatorLiskDAO::assertAttached(string) called at [<phabricator>/src/applications/differential/storage/DifferentialRevision.php:158]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] #1 <#2> DifferentialRevision::getActiveDiff() called at [<phabricator>/src/applications/differential/customfield/DifferentialBranchField.php:72]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] #2 <#2> DifferentialBranchField::updateTransactionMailBody(PhabricatorMetaMTAMailBody, DifferentialTransactionEditor, array) called at [<phabricator>/src/applications/transactions/editor/PhabricatorApplicationTransactionEditor.php:2481]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] #3 <#2> PhabricatorApplicationTransactionEditor::addCustomFieldsToMailBody(PhabricatorMetaMTAMailBody, DifferentialRevision, array) called at [<phabricator>/src/applications/differential/editor/DifferentialTransactionEditor.php:1208]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] #4 <#2> DifferentialTransactionEditor::buildMailBody(DifferentialRevision, array) called at [<phabricator>/src/applications/transactions/editor/PhabricatorApplicationTransactionEditor.php:2178]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] #5 <#2> PhabricatorApplicationTransactionEditor::sendMailToTarget(DifferentialRevision, array, PhabricatorMailTarget) called at [<phabricator>/src/applications/transactions/editor/PhabricatorApplicationTransactionEditor.php:2152]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] #6 <#2> PhabricatorApplicationTransactionEditor::sendMail(DifferentialRevision, array) called at [<phabricator>/src/applications/transactions/editor/PhabricatorApplicationTransactionEditor.php:998]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] #7 <#2> PhabricatorApplicationTransactionEditor::publishTransactions(DifferentialRevision, array) called at [<phabricator>/src/applications/transactions/worker/PhabricatorApplicationTransactionPublishWorker.php:21]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] #8 <#2> PhabricatorApplicationTransactionPublishWorker::doWork() called at [<phabricator>/src/infrastructure/daemon/workers/PhabricatorWorker.php:91]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] #9 <#2> PhabricatorWorker::executeTask() called at [<phabricator>/src/infrastructure/daemon/workers/storage/PhabricatorWorkerActiveTask.php:162]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] #10 <#2> PhabricatorWorkerActiveTask::executeTask() called at [<phabricator>/src/infrastructure/daemon/workers/PhabricatorTaskmasterDaemon.php:20]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] #11 PhabricatorTaskmasterDaemon::run() called at [<phutil>/src/daemon/PhutilDaemon.php:185]
Daemon 39819 STDE [Thu, 04 Jun 2015 02:56:38 +0000] #12 PhutilDaemon::execute() called at [<phutil>/scripts/daemon/exec/exec_daemon.php:125]
```
Auditors: btrahan
Summary:
Ref T6367. Do all mail, feed, notification and search stuff from the daemons, in all editors.
There are four relatively-stateful editors (Audit, Differential, Phriction, PhortuneCart) which needed special care to move state into the daemons properly.
Beyond that, I moved mailTo/mailCC/feedRelated/feedNotify to be computed before we enter the worker:
- This is simpler, since a lot of editors rely on being able to call `$object->getReviewers()` or similar to compute them.
- This is more correct, since we want to freeze the lists at this moment in time.
Finally, I renamed `loadEdges` to `willPublish` and made it a slightly more general hook.
---
This is a bit fragile and I'm not //thrilled// about it.
It would probably be cleaner to have separate Editor and Publisher classes (something like @fabe's D11329 did). However, I think that's quite a lot of work, and I'd like to see stronger motivation for it (either in this actually being more fragile than I think, or there being other things we get out of it). Overall, I'm comfortable with this change, just definitely not a big fan of the "save" + "load" pattern since I think it's really fragile, nonobvious, hard to debug/predict, etc.
Test Plan:
Directly updated editors:
- Created a new Phriction page, saw "Document Content".
- Edited a Phriction page, saw "Document Diff".
- Edited a revision, got normal looking mail.
- Faked in `changedPriorToCommitURI` and verified it survived the state boundary.
- Sent Audit mail.
- Sent invoice mail.
Indirect editors - for these, I just made a change and made sure the mail generated:
- Updated a paste.
- Updated an event.
- Updated a thread.
- Updated a task.
- Updated a mock.
- Updated a question.
- Updated a project.
- Updated a file.
- Updated an initiative.
- Updated a Legalpad document.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, fabe
Maniphest Tasks: T6367
Differential Revision: https://secure.phabricator.com/D13115
Summary:
Ref T7703. See that task and inline for a bunch of discussion.
Briefly, when we run implicit policy rules ("to see a revision, you must also be able to see its repository") at query time, they don't apply to other viewers we might check later.
We do this very rarely, but when we do we're often doing it for a bunch of different viewers (for example, in Herald) so I don't want to just reload the object a million times.
Test Plan:
- Added and executed unit tests.
- Wrote a "flag everything" Herald rule, as in the original report in T7703, and no longer got "Unknown Object" flags on revisions.
- Rigged up a lot of cases in the web UI and couldn't find any inconsistencies, although this case is normally very hard to hit.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7703
Differential Revision: https://secure.phabricator.com/D13104
Summary: Ref T8387. This is now completely obsoleted by mailing list users.
Test Plan: Grepped for `mailinglist` and related symbols.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: eadler, epriestley
Maniphest Tasks: T8387
Differential Revision: https://secure.phabricator.com/D13129
Summary: Ref T7604. Remove these "arcanist project" fields from the `LiskDAO` classes, but leave the data intact (there are no more read/writes to this data).
Test Plan:
- Grepped for calls to these methods.
- Ran `./bin/storage adjust` to check for schema issues.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7604
Differential Revision: https://secure.phabricator.com/D13012
Summary: Ref T8099, No specific reason for these to be small buttons.
Test Plan: Test desktop and mobile layouts.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13081
Summary: These could cause F442758.
Test Plan: {F442779}
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D13042
Summary:
Ref T7447. Implements per-viewer comment hiding. Once a comment is obsolete or uninteresting, you can hide it completely.
This is sticky per-user.
My hope is that this will strike a better balance between concerns than some of the other approaches (conservative porting, summarization, hide-all).
Specifically, this adds a new action here:
{F435621}
Clicking it completely collapses the comment into a small icon on the previous line, and saves the comment state as hidden for you:
{F435626}
You can click the icon to reveal all hidden comments below the line.
Test Plan:
- Hid comments.
- Showed comments.
- Created, edited, deleted and submitted comments.
- Used Diffusion comments (hiding is not implemented there yet, but I'd plan to bring it there eventually if it works out in Differential).
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: jparise, yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D13009
Summary:
We don't want to support this right now, so disable it, similar to "Land To Hosted" feature.
Keep to the code as an example for advanced installs.
Ref T182, T8313
Test Plan: load a diff.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T182, T8313
Differential Revision: https://secure.phabricator.com/D13022
Summary: These format strings use `%d` instead of `%s`.
Test Plan: Eyeball it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12996
Summary:
fixes T8260. Only turn on symbol links if:
- The repository has any configuration about symbols, or
- There actually are symbols in the repository.
Test Plan: Look at revisions and files in various states of configurations and having symbols.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: joshuaspence, Korvin, epriestley
Maniphest Tasks: T8260
Differential Revision: https://secure.phabricator.com/D12946
Summary: Converts most all tables to be directly set via `setTable` to an ObjectBox. I think this path is more flexible design wise, as we can change the box based on children, and not just CSS. We also already do this with PropertyList, Forms, ObjectList, and Header. `setCollapsed` is added to ObjectBox to all children objects to bleed to the edges (like diffs).
Test Plan: I did a grep of `appendChild($table)` as well as searches for `PHUIObjectBoxView`, also with manual opening of hundreds of files. I'm sure I missed 5-8 places. If you just appendChild($table) nothing breaks, it just looks a little funny.
Reviewers: epriestley, btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12955
Summary: Fixes T8264. Broken in D12929. Sweep all the applyBuiltin implementations and always break; rather than return
Test Plan: added myself to a project successfully (showed up as a member)
Reviewers: epriestley, chad
Subscribers: Korvin, epriestley
Maniphest Tasks: T6403, T8264
Differential Revision: https://secure.phabricator.com/D12940
Summary: Ref T6403. This was actually simple stuff.
Test Plan: changed the edit policy of a paste. changed the edit and join policy of a phame blog.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6403
Differential Revision: https://secure.phabricator.com/D12933
Summary: Ref T6403. Conpherence keeps track of comments for message counts so we needed some special attention there. Otherwise, straight-forward.
Test Plan: left a comment on a diff with inline comments. sent messages in conpherence successfully. verified unread count incremented correctly for sent messages for users.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6403
Differential Revision: https://secure.phabricator.com/D12932
Summary: Ref T6403. This one was pretty easy since no one does anything custom with subscribers.
Test Plan: subscribed / unscribed to a random commit ("audit"). joined / left, watched / unwatched a project
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6403
Differential Revision: https://secure.phabricator.com/D12930
Summary: Ref T6403. This does TYPE_EDGE since I just had to deal with T8252. Look like this fixes a few editors (maybe) that would have had fatals with mentions like slowvote and ponder.
Test Plan: made a phame post mentioning a task and it worked! joined / left a project, watched / unwatched a project and that worked! blind faith for other sites.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6403
Differential Revision: https://secure.phabricator.com/D12929
Summary:
Fixes T7977.
- Move Indexed Languages and See Symbols From config to Repository
- Make symbol search skip projects
This also makes the default languages to Everything instead of Nothing.
Test Plan:
- Browse files, click symbols.
- Use quick search to find symbols
- Browse revision, click symbols
Reviewers: joshuaspence, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T7977
Differential Revision: https://secure.phabricator.com/D12687
Summary:
Fixes T6956. Before this change, we called PhabricatorUser::getOmnipotentUser in the various delete methods to query the data. Now, we use $engine->getViewer(), since its always a good thing to have less calls to PhabricatorUser::getOmnipotentUser thrown around the codebase.
I used the "codemod" tool to audit the existing calls to PhabricatorDestructorEngine (all of them) so ostensibly this gets all the spots. If I missed something though, its still going to work, so this change is very low risk.
Test Plan: ./bin/remove destroy P1; visit P1 and get a 404
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6956
Differential Revision: https://secure.phabricator.com/D12866
Summary:
New, cleaner, ObjectItemLists. Lots of minor style tweaks, basic overview:
- Remove FootIcons
- Remove Stackable
- Remove Plain List
- Add StatusIcon
- Add setting ObjectList to an ObjectBox
- Minor retouches to Headers
Mostly, this should give us an idea of life with the new Object Lists. I'll take another application by application pass down the road. This mostly looks at implementation in Maniphest, Differential, Audit, Workboards. Checked a few other areas and dialogs while testing, and everything looks square.
Test Plan: Maniphest, Differential, Homepage, Audit, People, and other applications. Drag reorder, etc.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12865
Summary:
Ref T7707. Handles currently have a "status" field and a "disabled" field.
The "status" field has these possible values: "open", "closed", "1", "2". durp durp durp
Instead, do:
- status = <open, closed>
- availability = <full, partial, none, disabled>
I think these make more sense? And are a bit more general? And use the same kind of constants for all values!
Test Plan: Looked at all affected handles in all states (probably).
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7707
Differential Revision: https://secure.phabricator.com/D12832
Summary: Use `__CLASS__` instead of hard-coding class names. Depends on D12605.
Test Plan: Eyeball it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12806
Summary:
Ref T7447. Fixes T7600. This likely needs significant adjustment, but implements content-aware comment porting for line changes.
Specifically, this moves lines around to adjust their position considering added and removed lines between the diffs and across rebases.
It does not try to do any actual content (line against line) matching.
Test Plan:
- Unit tests.
- Poking around in the web UI seems to generate mostly reasonable-ish results?
- This may be a huge step backward in some cases that I just haven't hit.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, epriestley
Maniphest Tasks: T7600, T7447
Differential Revision: https://secure.phabricator.com/D12741
Summary: Ref T7776. This could get better, but I think I got most of the big stuff. It's ~4x faster now.
Test Plan:
Before:
{F393338}
After:
{F393339}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7776
Differential Revision: https://secure.phabricator.com/D12730
Summary: Ref T7447. At least some users dislike this feature so strongly that they'd prefer not to have it at all.
Test Plan: Viewed ghosts; toggled preference, no more ghosts.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D12704
Summary: See D12702.
Test Plan: Made something a link and clicked it, seemed to work OK.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim, epriestley
Differential Revision: https://secure.phabricator.com/D12703
Summary: Closes T7928, E{id} is available via global search.
Test Plan: Create calendar event, search for its monogram in global search, event should be accessible.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7928
Differential Revision: https://secure.phabricator.com/D12581
Summary: Seems reasonable? At least, it always matches however a user might think about documents (app or document). Unclear if "Diffusion" for example, are actually needed.
Test Plan: tested searching for "phriction", "wiki", "document", etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12577
Summary: "Authors" and "Subscribers" convert easily without any extra work.
Test Plan: Used both fields; used functions and normal tokens.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12556
Summary:
See M1433. Fixes T7266. Fixes T4475. Ref T7314.
Future work/notes/etc:
- Write the User Guide (see TODO).
- This might needs some design tweaks -- I think it's functionally almost-equivalent to the mock, but the UI isn't quite the same.
- (Mobile design is a touch off-looking I think?)
- When you use a custom query, the duplicate "magnifying glass" icons are a little weird. Maybe change one or the other.
- Maybe worth adding an "Open Documents in Current Application" option? Planning to wait for feedback on that.
- Need a Quicksand integration to change the current application at some point.
- Searching in "Current Application" from, e.g., the 404 page just searches all documents. Current plan is to just document this behavior, since the icon is a pretty good callout and it seems plausible that this is intuitive enough that users won't have a hard time with it.
Test Plan:
New dropdown:
{F379150}
Device-ish:
{F379151}
Normal search (current application, from maniphest, selects tasks):
{F379153}
Application search from non-application:
{F379154}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: johnny-bit, epriestley
Maniphest Tasks: T7266, T7314, T4475
Differential Revision: https://secure.phabricator.com/D12509
Summary:
Ref T7447. Ref T7870.
When a ghostly inline appears on the page, the timeline isn't currently aware that it's present, so it links elsewhere.
Instead, apply adjustments before rendering the timeline.
Ref T5030. This makes the behaviors in T5030 irrelevant most of the time.
Test Plan:
Before:
{F378106}
After:
- Inlines visible on page are linked directly.
- Inlines which we can't port (e.g., on files not present on current page) are still linked off-page.
- Used "Show Older" to page through and verify consistent rendering.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, epriestley
Maniphest Tasks: T5030, T7870, T7447
Differential Revision: https://secure.phabricator.com/D12497
Summary:
Ref T7447. Ref T7870. When a diff affects more than 100 files, we collapse files by default, then expand files with inlines.
Ghostly inlines currently don't cause files to expand, but reasonably should.
Test Plan:
Before:
{F378065}
After:
{F378066}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, epriestley
Maniphest Tasks: T7447, T7870
Differential Revision: https://secure.phabricator.com/D12495
Summary:
Ref T7447. Ref T7870.
- Forward: When rendering some file "B" which was moved from "A", port ghosts for both "A" and "B" to it.
- Backward: When porting a comment on "X" which was moved from some "Y", allow it to port to a file named "Y" if it can't find a file named "X".
Test Plan:
Before:
{F377809}
After:
{F377806}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7447, T7870
Differential Revision: https://secure.phabricator.com/D12493
Summary:
Ref T7447. Ref T7870. See T7870 for a detailed description of this issue.
NOTE: Replying to these inlines from the UI still does the wrong thing, because we use the database line number, not the UI line number.
Test Plan:
Before:
{F377732}
After:
{F377733}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7447, T7870
Differential Revision: https://secure.phabricator.com/D12491
Summary:
Ref T7447. This might be overkill, but I want to over-explain things until we have more confidence that this is rarely confusing.
NOTE: I'm playing it a bit fast and loose with `setIsGhost()` (passing a dictionary) because making API changes requires changing the interface and Diffusion, which is a pain. I'll clean this up at the end once the interface is more final. This is well-contained for now.
Test Plan:
- Viewed "base vs 2" in a diff with 3 diffs, saw some "older comments" and some "newer comments".
- Hovered the tags for an explanation of comment spookiness.
{F377703}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D12490
Summary:
Ref T7447. After compiling inlines which will appear on the changeset, remove inlines which
Later stages remove these anyway, so it doesn't change anything to keep them around, but we can filter them out here cheaply.
This will also let us drive the Differential timeline view with the same logic a few diffs from now, to improve how it renders inlines. Generalize things a little bit.
Test Plan:
- Made a comment on the left of diff 1.
- Made diff 2.
- Viewed diff 2 vs diff 1.
- Verified old-left comment was filtered out by the new loop.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D12488
Summary:
Ref T7447. This ports comments forward and backward in the best case:
- The old comment is on a changeset with the same filename.
- The old and new files are pretty much the same, line-for-line.
This will fail to port a lot of comments around and probably port a lot of comments into goofy places. We can see how bad it is in practice.
Errata:
- Design is me cobbling something together, probably worth tweaking.
- "Old Comment" should, at a minimum, say "Newer Comment" sometimes, or we should come up with some better name for this stuff.
Test Plan: {F377214}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: johnny-bit, yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D12484
Summary:
Ref T7447. This class is currently a big mess with a lot of `withWeirdSpecialThingUsedInOnePlace()` type qualifiers.
Try to generalize/normalize it a bit.
Test Plan:
- Viewed inline comments.
- Created a new inline comment.
- Edited an inline comment.
- Marked an inline comment complete.
- Deleted, then undeleted an inline comment.
- Previewed inline comments.
- Viewed drafts as another user, verified they don't show up.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, epriestley
Maniphest Tasks: T7447
Differential Revision: https://secure.phabricator.com/D12483
Summary:
Ref T4100. This just makes the "specify stuff in query parameters" workflow a little better:
- You can now do `?projects=differential,diffusion`.
- You can now do `?projects=projects(alincoln)`.
Test Plan: Did that stuff ^^^^
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4100
Differential Revision: https://secure.phabricator.com/D12468
Summary:
Ref T4100. Ref T5595. This implements these fields in one mega-field:
- Projects
- Not in projects
- In any project
- Include results in no projects
- In users' projects
Hopefully, this is a step in the right direction.
Test Plan: {F375555}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, chad, epriestley
Maniphest Tasks: T4100, T5595
Differential Revision: https://secure.phabricator.com/D12463
Summary:
Ref T4100. I can simplify the logic a bit here by moving some rendering into the datasources, but a few TokenizerControls currently don't have datasources.
Require datasources and always provide datasources.
Test Plan:
- Used previously-datasourceless controls (e.g., "Add Reviewers").
- Used normal controls.
- Manually verified that no other controls are missing datasources.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4100
Differential Revision: https://secure.phabricator.com/D12456
Summary:
Ref T4100. Ref T5595.
To support a unified "Projects:" query across all applications, a future diff is going to add a set of "Edge Logic" capabilities to `PolicyAwareQuery` which write the required SELECT, JOIN, WHERE, HAVING and GROUP clauses for you.
With the addition of "Edge Logic", we'll have three systems which may need to build components of query claues: ordering/paging, customfields/applicationsearch, and edge logic.
For most clauses, queries don't currently call into the parent explicitly to get default components. I want to move more query construction logic up the class tree so it can be shared.
For most methods, this isn't a problem, but many subclasses define a `buildWhereClause()`. Make all such definitions protected and consistent.
This causes no behavioral changes.
Test Plan: Ran `arc unit --everything`, which does a pretty through job of verifying this statically.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, hach-que, epriestley
Maniphest Tasks: T4100, T5595
Differential Revision: https://secure.phabricator.com/D12453
Summary: Ref T4100. This restores the simpler behavior. See discussion in T4100#107445
Test Plan: Used Differential search, saw my token.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4100
Differential Revision: https://secure.phabricator.com/D12447
Summary:
Ref T4100. This is still a bit rough around the edges, but mostly does what we're after.
- Implements viewer() and members(...) functions.
- The new browse workflow makes these discoverable.
Test Plan: {F374201}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T4100
Differential Revision: https://secure.phabricator.com/D12444
Summary:
Ref T7803. Ref T5873. I want to drive Conduit through more shared infrastructure, but can't currently add parameters automatically.
Put a `getX()` around the `defineX()` methods so the parent can provide default behaviors.
Also like 60% of methods don't define any special error types; don't require them to implement this method. I want to move away from this in general.
Test Plan:
- Ran `arc unit --everything`.
- Called `conduit.query`.
- Browsed Conduit UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: hach-que, epriestley
Maniphest Tasks: T5873, T7803
Differential Revision: https://secure.phabricator.com/D12380
Summary: Ref T7803. Remove these in favor of more generalized paging and ordering.
Test Plan: Sorted and paged results in various applications.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7803
Differential Revision: https://secure.phabricator.com/D12378
Summary:
Ref T7803. Removes some getReversePaging().
This also fixes `null` column handling, by adding an explicit `'null'` key with possible values "head" (put NULL before other values) or "tail" (put NULL after other values).
Maniphest has some glitchiness in paging through NULLs right now, but I believe it's all pre-existing and will be resolved when it fully converts. Diffusion is fully converted and pages through NULL correctly.
Test Plan:
- Failed to identify any reason for ChangesetQuery to reverse paging.
- Paged thorugh Diffusion.
- Paged through Maniphest.
- Maniphest has some issues when paging inside a NULL section, but these issues are preexisting and will be resolved later in this change sequence.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7803
Differential Revision: https://secure.phabricator.com/D12371
Summary:
Ref T7803. This is a performance hack, not a real order, and isn't really meaningful or pageable.
After D12158, we constraint his query on `dateModified` anyway, which should generally give the database a relatively small result set to examine.
Test Plan: Browsed Differential and Diffusion. Checked query plan, it didn't look too crazy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7803
Differential Revision: https://secure.phabricator.com/D12361
Summary: Ref T7803. Reduce the amount of code we're trusting to build SQL queries.
Test Plan:
- Paged through results in Maniphest, Differential and Diffusion.
- Some of the NULLable groups in Maniphest are a bit funky but this was preexisting.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7803
Differential Revision: https://secure.phabricator.com/D12353
Summary:
Fixes T7731. When a user writes a "Send me an email" rule, always try send them an email, even if their notification settings would normally downgrade it to a notification.
In particular, this is stronger than these downgrades:
- Downgrades due to "self actions";
- downgrades due to "mail tags".
Test Plan:
- Wrote various Herald rules with "Send me an email" rules.
- Used `bin/mail list-outbound` / `show-outbound` to vet generated mail.
- Mail reacted properly to a variety of conditions (disabled accounts, settings, "send me an email" rule, forced delivery).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7731
Differential Revision: https://secure.phabricator.com/D12300
Summary:
Ref T7731. For no particular reason, we currently put `ruleID` and `rulePHID` on `HeraldEffect` objects.
Pretty much all callers need the `HeraldRule` objects instead, and some go to great lengths to get them.
Just attach the `Rule` objects.
Test Plan: Will test thoroughly after next-ish changeset.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7731
Differential Revision: https://secure.phabricator.com/D12269
Summary:
Ref T7731. Every adapter subclass currently implements this effect in an essentially identical way.
Some day far from now the effects will be modular and this mess will vanish completely, but reduce its sprawl for now.
Test Plan: I'll test this thoroughly at the end of the change sequence since writing rules is a pain.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7731
Differential Revision: https://secure.phabricator.com/D12268
Summary: These arrays looks a little odd, most likely due to the autofix applied by `ArcanistXHPASTLinter::LINT_ARRAY_SEPARATOR`. See D12296 in which I attempt to improve the autocorrection from this linter rule.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12281
Summary:
Fixes T7199. This still isn't a shining example of perfect code, but the raw amount of copy/paste is much lower than it used to be.
- Reduce code duplication between existing receivers.
- Expose receiving objects in help menus where appropriate.
- Connect some "TODO" receivers.
Test Plan:
- Sent mail to every supported object type.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12249
Summary: Ref T7199. This makes the page look less janky and provides more context about how mail commands work and how to use them.
Test Plan: {F355959}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12245
Summary:
Ref T7199. Convert the single help menu item into a dropdown and allow applications to list multiple items there.
When an application has mail command objects, link them in the menu.
Test Plan:
{F355925}
{F355926}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12244
Summary: Ref T7199. This needs some polish and isn't reachable from the UI, but technically has all of the information.
Test Plan:
{F355899}
{F355900}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12241
Summary: Ref T7199. Convert Differential to modern modular commands.
Test Plan: Used `bin/mail receive-test` to send command and comment mail to Differential.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12239
Summary:
Ref T7199. In the vein of D12231, these options were a bad idea.
- They once served a very narrow, Facebook-specific need (see T1992), except even Facebook only used the Differential setting AFAIK.
- Outside of that special case, they are unused and essentially unusable (generally speaking, they do not meaningfully implement anything modular or replaceable).
- I have no knowledge of any install ever changing these settings, and can imagine no reason why they would.
Moving forward:
- If they really need to, they can fork locally and chagne one line.
- I expect "!actions" to make mail at least somewhat more modular soon, anyway.
- Any derived handlers would break after T7199 and need to be rewritten anyway, so this is just taking advantage of a BC break to do cleanup.
Test Plan:
- Grepped for removed configuration.
- Sent some mail from applications, verified the reply handlers set proper reply addresses.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12233
Summary:
Ref T7199. These were a bad idea which got copy-pasted a bunch.
- There is zero reason to ever set these to different things.
- Unsurprisingly, I don't know of any install which has them set to different things.
Unless I've completely forgotten about it, this option was not motivated by some obscure business need, it was just a bad decision which didn't catch anyone's attention at the time.
We partially remedied the mistake at some point by introducing `metamta.reply-handler-domain`, which works as a default for all applications, but never cleaned this mess up.
Test Plan: Sent some mail from applications, verified it picked up appropraite reply handler domains.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12231
Summary:
Ref T7199. This prepares for an exciting new world of more powerful "!action" commands. In particular:
- We parse multiple commands per mail.
- We parse command arguments (these are currently not used).
- We parse commands at the beginning or end of mail.
Additionally:
- Do a quick modernization pass on all handlers.
- Break legacy compatibility with really hacky Facebook stuff (see T1992). They've theoretically been on notice for a year and a half, and their setup relies on calling very old reply handler APIs directly.
- Some of these handlers had some copy/paste fluff.
- The Releeph handler is unreachable, but fix it //in theory//.
Test Plan:
- Sent mail to a file; used "!unsubscribe".
- Sent mail to a legalpad document; used "!unsubscribe".
- Sent mail to a task; used various "!close", "!claim", "!assign", etc.
- Sent mail to a paste.
- Sent mail to a revision; used various "!reject", "!claim", etc.
- Tried to send mail to a pull request but it's not actually reachable.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12230
Summary:
Ref T7199. Although this is useful for discovery, it's un-useful enough that we already have an option to disable it, and most applications do not provide any meaningful instructions.
Throwing it away makes it easier to move forward and lets us get rid of a config option.
This is becoming a more advanced/power-user feature anyway, and the new syntax will be significantly more complex and hard to explain with a one-liner. I'm currently thinking that I'll maybe make the "help" menu a dropdown and give it some options like:
+---+
| O |
+---+---------------------+
| Maniphest Documentation |
| Maniphest Email Actions |
+-------------------------+
Then you click the "Email Actions" thing and get a runtime-derived list of available options. Not sure if I'll actually build that, but I think we can fairly throw the in-mail instructions away even if we don't go in that specific direction.
Test Plan: Grepped for `replyHandlerInstructions`, got no hits.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12229
Summary: Ref T7689. Ref T4100. This advances the goals of removing `loadViewerHandles()` (only 67 callsites remain!) and letting tokenizers some day take token functions like `viewer()` and `members(differential)`.
Test Plan:
- Sent a new message; used "To".
- I simplified the cancel URI construction slightly because it's moot in all normal cases.
- Edited a thread; used "Add Participants".
- Searched rooms; used "Participants".
- Searched countdowns; used "Authors".
- Created a diff; used "Repository".
- Edited a revision; edited "Projects"; edited "Reveiwers"; edited "Subscribers".
- Searched for revisions; edited "responsible users"; "authors"; "reviwers"; "subscribers"; "repositories".
- Added revision comments; edited "Add Reveiwers"; "Add Subscribers".
- Commented on a commit; edited "Add Auditors"; "Add subscribers".
- Edited a commit; edited "Projects".
- Edited a repository; edited "Projects".
- Searched feed, used "include Users"; "include Proejcts".
- Searched files, used "authors".
- Edited initiative; edited "Projects".
- Searched backers; used "Backers".
- Searched initiatives; used "Owners".
- Edited build plans; edited "Run Command".
- Searched Herald; used "Authors".
- Added signature exemption in Legalpad.
- Searhced legalpad; used "creators"; used "contributors".
- Searched signatures; used "documents"; used "signers".
- Created meme.
- Searched macros; used "Authors".
- Used "Projects" in Maniphest reports.
- Used Maniphest comment actions.
- Edited Maniphest tasks; edited "Assigned To"; edited "CC"; edited "projects".
- Used "parent" in Maniphest task creation workflow.
- Searched for projects; used "assigned to"; "in any projec"; "in all projects"; "not in projects"; "in users' projects"; "authors"; "subscribers".
- Edited Maniphest bug filing domains, used "Default Author".
- Searched for OAuth applications, used "Creators".
- Edited Owners pacakge; edited "Primary Owner"; edited "Owners".
- Searched for Owners packages; used "Owner".
- OMG this UI is OLD
- Edited a paste; edited "Projects".
- Searched for paste; used "Authors".
- Searched user activity log; used "Actors"; used "Users".
- Edited a mock; edited "Projects"; edited "CC".
- Searched for mocks; used "Authors".
- Edited Phortune account; edited "Members".
- Edited Phortune merchant account; edited "Members".
- Searched Phrequent; used "Users".
- Edited Ponder question; sued "projects".
- Searched Ponder; used "Authors"; used "Answered By".
- Added project members.
- Searched for projects; used "Members".
- Edited a Releeph product; edited "Pushers".
- Searched pull requests; searched "Requestors".
- Edited an arcanist project; used "Uses Symbols From".
- Searhced push logs; used "Repositories"; used "Pushers".
- Searched repositories; used "In nay project".
- Used global search; used Authors/owners/Subscribers/In Any Project.
- Edited a slowvote; used "Projects".
- Searched slovotes; used "Authors".
- Created a custom "Users" field; edited and searched for it.
- Made a whole lot of typos in this list. ^^^^^^
Did not test:
- Lint is nontrivial to test locally, I'll test it in production.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4100, T7689
Differential Revision: https://secure.phabricator.com/D12224
Summary:
Ref T1460. Overall:
- Pass `objectOwnerPHID` consistently.
- Pass viewer consistently.
- Set the correct draft state for checkboxes on the client.
Test Plan:
- Made inline comments in Differential.
- Made inline comments in Diffusion.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12186
Summary:
This returns the PHID of the current revision owner, or the commit author, if one exists.
NOTE: For drafts, we currently return `null`; I'll fix that in a future change. Should be correct for submitted comments.
Test Plan: Added an inline, nothing seemed broken.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D12185
Summary:
Fixes T7602. This is similar to the existing behavior for "changes planned" and "needs revision" revisions.
Also fix the "Update Diff" workflow so it correctly selects closed revisions as attachable.
Test Plan: Updated an abandoned revision, saw it change to "Needs Review".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7602
Differential Revision: https://secure.phabricator.com/D12167
Summary: Fixes T5658. Over a long period of time, some cruft can build up here. Only show revisions which have been updated in the last 30 days.
Test Plan:
- Viewed panel in Differential and Diffusion.
- Changed limit from 30 days to 30 seconds and saw no revisions.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5658
Differential Revision: https://secure.phabricator.com/D12158
Summary: Fixes T6378.
Test Plan: Set config to `/.*/`, created a new diff, everything was collapsed as generated.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6378
Differential Revision: https://secure.phabricator.com/D12159
Summary:
Ref T1266. We won't detect a move/copy if fewer than 3 lines are changed.
However, you may move a block like:
Complicated Line A
Trivial Line B
Complicated Line C
...where "Trivial Line B" is something like a curly brace. If you move this block somewhere that happened to previously have a similar trivial curly brace line, we won't be able to find 3 contiguous added lines in order to detect the copy/move.
Instead, consider both changed and unchanged lines when trying to find contiguous blocks. This allows us to detect across gaps where lines were not actually changed.
This new algorithm may be too liberal (for example, we may end up incorrectly identifying moved/copied code before or after changed lines, not just between changed lines), but we can keep an eye on it and tweak it. The algorithm is better factored and better covered, now.
Test Plan:
- Added a unit test for this case.
- Spot-checked a handful of diffs and generally saw behavior that made sense and looked better than before.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1266
Differential Revision: https://secure.phabricator.com/D12146
Summary:
Ref T1266. This doesn't change any behaviors, but some of this code has a lot of really complicated conditionals and I tried to break that up a bit.
Also, reexpress this stuff in terms of the "structured" parser in D12144.
Test Plan: Unit tests still pass. They aren't hugely comprehensive but did reliably fail when I screwed stuff up.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1266
Differential Revision: https://secure.phabricator.com/D12145
Summary:
Ref T1266. This prepares to fix case (2) on T1266 by improving the robustness of hunk parsing.
In particular, the copy detection code abuses this API because it isn't currently expressive or flexible enough.
Make it more flexible and cover it exhaustively.
I'll move callsites to the new stuff in upcoming revisions.
Test Plan: Unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1266
Differential Revision: https://secure.phabricator.com/D12144
Summary:
Ref T5644. See some discussion in D8040.
When a file is very large (more than 64KB of text), don't activate syntax highlighting by default. This should prevent us from wasting resources running `pygmentize` on enormous files.
Users who want the file highlighted can still select "Highlight As...".
The tricky part of this diff is separating the headers into "changeset" headers and "undershield" (rendering) headers. Specifically, a file might have these headers/shields:
- "This file is newly added."
- "This file is generated. Show Changes"
- "Highlighting is disabled for this large file."
In this case, I want the user to see "added" and "generated" when they load the page, and only see "highlighting disabled" after they click "Show Changes". So there are several categories:
- "Changeset" headers, which discuss the changeset as a whole (binary file, image file, moved, added, deleted, etc.)
- "Property" headers, which describe metadata changes (not relevant here).
- "Shields", which hide files from view by default.
- "Undershield" headers, which provide rendering information that is only relevant if there is no shield on the file.
Test Plan:
- Viewed a diff with the library map, clicked "show changes", got a "highlighting disabled" header back with highlighting disabled.
- Enabled highlighting explicitly (this currently restores the shield, which it probably shouldn't, but that feels out of scope for this change). The deshielded file is highlighted per the user's request.
- Loaded context on normal files.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T5644
Differential Revision: https://secure.phabricator.com/D12132
Summary:
Ref T1460. When a revision author updates/comments/etc on a revision, publish all their checkmarks.
This doesn't handle Diffusion/audits yet.
Test Plan: {F346870}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12126
Summary:
Ref T1460. This just barely works, but throwing it up in case any of it sounds mechanically crazy before we build integrations/UI/etc.
Specifically, these are the behaviors:
- You can mark your own draft comments as "done" before you submit them. The intent is to let reviewers mark their stuff advisory/minor/not-important before they submit it, to hint to authors that they don't expect the feedback to necessarily be addressed (maybe it's a joke, maybe it's just discussion, maybe it's "consider..").
- You can mark others' published comments as "done" if you're the revision/commit author. The intent is to keep this lightweight by not requiring an audit trail of who marked what done when. If anyone could mark anything done, we'd have to have some way to show who marked stuff.
- When you mark stuff done (or unmark it), it goes into a "draft" state, where you see the change but others don't see it yet. The intent is twofold:
- Be consistent with how inlines work.
- Allow us to publish a "epriestley updated this revision + epriestley marked 15 inlines as done" story later if we want. This seems more useful than publishing 15 "epriestley marked one thing as done" stories.
- The actual bit where done-ness publishes isn't implemented.
- UI is bare bones.
- No integration with the rest of the UI yet.
Test Plan: Clicked some checkboxes.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: paulshen, chasemp, epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12033
Summary:
Fixes T1102. If you don't use `arc`, the web workflow requires some extra needless steps when updating diffs.
Provide a more streamlined "Update Diff" workflow.
Test Plan: {F347750}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1102
Differential Revision: https://secure.phabricator.com/D12131
Summary: Ref T7611. This should let us figure out the root cause, hopefully.
Test Plan: iiam
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7611
Differential Revision: https://secure.phabricator.com/D12124
Summary:
Ref T2009. Ref T1460.
Fixes T2618. When users hit "Delete" on inline comments, delete immediately and offer them "Undo". If they delete indirectly (e.g., by clicking "Delete" from the preview at the bottom of the page), we still prompt them, because the "Undo" action either won't be available or may not be easy to find. This is a "refdelete".
Fixes T6464. This was just a mess. Make it not as much of a mess. It should work now. Pretty sure.
Fixes T4999. We did not refresh these links often enough to find targets for them, so they could race with content. Reevaluate them after loading new changes.
Test Plan:
- Deleted and undid deletion of inlines from main view and preview.
- Clicked "View" on inlines.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6464, T4999, T2618, T1460, T2009
Differential Revision: https://secure.phabricator.com/D12032
Summary:
Ref T2009. Ref T1460. The way Diffusion and Differential load inlines is horrible garbage right now:
- Differential does an ad-hoc query to get the PHIDs, then does a real load to policy check.
- Diffusion completely fakes things. In practice this is not a policy violation, but it's dangerous.
Make TransactionCommentQuery extensible so we can subclass it and get the query building correctly in the right Query layer.
Specifically, the Diffusion and Differential subclasses of this Query will add appropriate `withX()` methods to let us express the query in SQL.
Test Plan: Loaded, previewed, edited, and submitted inlines in Differential and Diffusion
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009, T1460
Differential Revision: https://secure.phabricator.com/D12026
Summary:
Ref T1460. Ref T2618.
When publishing a draft inline, mark the inline it replies to (if any) as replied to.
Also, don't load deleted comments as drafts (sets the stage for T2618).
I'll make an effort to clean up the loading mess here in the next revision, and find some more appropriate home for the shared code.
Test Plan: Made and replied to comments in Differential and Diffusion. Saw comments get marked as "Has Replies" and "Is Reply".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2618, T1460
Differential Revision: https://secure.phabricator.com/D12025
Summary: Ref T2009. These subclasses have a mixture of similar methods, move them all to the base class.
Test Plan: Created/edited/undo/submitted comments on the left and right sides of a diff.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12024
Summary:
Ref T2009. This is another almost-identical copy of the row scaffolding, which has the same 1up/2up bugs as the 8 other copies of this code.
Turn the "undo" element into an InlineCommentView so we can scaffold it.
Then, scaffold it with the same code as everything else.
Test Plan: Hit "Undo", swapped from 1up to 2up, hit "undo" again, swapped back, tried left/right, everything rendered with proper scaffolding.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12019
Summary:
Ref T1460. Track and store which comments are threaded replies to other comments, vs merely appearing on the same lines.
This doesn't actually write `hasReplies` yet, since that needs to happen when we un-draft comments on submission.
Test Plan: Made inline comments in Differential and Diffusion, including replies. Replies were marked as "Is Reply".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1460
Differential Revision: https://secure.phabricator.com/D12017
Summary:
Fixes T4452. Ref T2009. There's a hierarchy of changeset rendering power: only low-level calls, use of ChangesetDetailView, then use of ChangesetListView (a list of DetailViews).
Prior to work here, the various changeset rendering controllers got their hands dirty to varying degrees, with some using only the lowest-level rendering pipeline:
- Phriction: no view (lowest level)
- Diffusion: DetailView
- Differential Changeset: DetailView
- Differential Diff: ListView
- Differential Revision: ListView
I brought Phriction up to use DetailView, but want to bring everything all the way up to use ListView. Each composition layer adds more features to diff browsing. In particular, this change enables "Highlight As", switching 1up vs 2up, adding inlines, etc., on the standalone view.
Test Plan:
- Viewed a changeset standalone. Could change highlighting, switch 1up vs 2up, add and edit inlines, etc.
- Viewed a revision; no behavioral changes.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4452, T2009
Differential Revision: https://secure.phabricator.com/D12012
Summary: Renames the method in PHUIObjectBoxView to match the new PHUIInfoView class.
Test Plan: grepped codebase. Went to Calendar and tried a new status.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12005
Summary: Ref T2009. Still a touch glitch-ish but essentially functional now.
Test Plan: Viewed image diffs in 1up and 2up views. Made inline comments on them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12003
Summary: Ref T2009. Remove the 4 (!!) copies of this code.
Test Plan:
- Added, edited, and removed inline comments in 2up view.
- Stacked a bunch of comments on the same line and saw the JS place them correctly.
- Created an image diff and added, edited and removed inlines on it.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D12000
Summary: Ref T2009. This can now be removed.
Test Plan: Added, edited and deleted an inline comment in 1up view.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11998
Summary:
Ref T2009. Inline comments have "scaffolding", which is basically some empty table cells/rows around them to get the layout correct.
The scaffolding depends on the renderer, since the cells are different for side-by-side vs unified diffs.
This is currently duplicated all over the place:
- Edit view has 1up/2up.
- Detail view has 1up/2up.
- 1up renderer has 1up.
- 2up renderer has four separate copies of the 2up logic.
These all have subtle differences, which are mostly bugs. Start making the scaffolding more composable so we can get rid of that mess.
Test Plan: Added, edited, and removed inline comments on unified and side-by-side diffs.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11997
Summary:
Ref T2009. These classes are "Differential" now, but are used elsewhere in diff infrastructure (e.g., Diffusion).
- Rename them to "PHUIDiff".
- Move them to "src/infrastructure/".
- Give them a base class.
Test Plan: Interacted with inlines in unified and side-by-side views.
Reviewers: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11996
Summary:
Ref T2009. This tweaks things a bit more to improve consecuitive groups of added and removed lines.
Generally, it gives us "old, old, old, new, new, new" intead of "old, new, old, new, old, new".
Feelin' real good about having unit tests for this stuff.
Test Plan: Unit tests, looked at diffs in web UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11994
Summary: This improves some cases with interleaved added and removed lines, and adds test coverage.
Test Plan:
- Added and executed unit tests.
- Viewed raw diff and saw sensible/expected output.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11992
Summary:
Ref T2009. This reduces how buggy inlines are. They're still buggy.
Specifically, the inline endpoint didn't know how to scaffold inlines before, so some of them ended up rendering in the wrong rows or breaking layouts.
This passes the current renderer through to the inline editor endpoint, so it can at least get the layout correct.
Test Plan: Interacted with inlines in unified and side-by-side views.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11988
Summary:
These aren't being populated yet; they mostly fix some JS errors with inlines.
For example, the inline hover reticle relies on adjusting its width to account for the "copy" column, and failed when the column did not exist.
Test Plan:
- Hovering inlines in unified now works, mostly.
- Interacted with inlines in side-by-side.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11985
Summary: Ref T2009. Unchanged lines should always go above inlines; we get nonsense results otherwise.
Test Plan: Inline now shows in correct place in unified view.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11987
Summary:
Ref T2009. Currently, lines don't get their "C123NL456" IDs set in the unified view. This is the major way that inlines are glued to changesets.
Simplify this rendering and bring it into the HTML renderer, then use it in the OneUp renderer.
Test Plan:
- Interacted with side-by-side inlines (hovered, added, edited, deleted), saw unchanged behavior.
- Interacted with unified inlines. They still don't work, but the error that breaks them is deeper in the stack.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11983
Summary: Ref T2009. I've clicked these links like 200 times in testing now, so I'm feeling pretty good about them.
Test Plan: Viewed links in side-by-side diff, clicked them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11981
Summary: Ref T2009. It doesn't make sense to have these as separate behaviors. We require a ChangesetViewManager to track view parameter state.
Test Plan: Interacted with changesets in Phriction, Differential and Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11979
Summary:
Ref T2009. Currently, we do not persist view parameters when making context rendering requests.
The big one is the renderer (1up vs 2up). This makes context on unified diffs come in with too many columns.
However, it impacts other parameters too. For example, at HEAD, if you change highlighting to "rainbow" and then load more context, the context uses the original highlighter instead of the rainbow highlighter.
This moves context loads into ChangesetViewManager, which maintains view parameters and can provide them correctly.
- This removes "ref"; it is no longer required, as the ChangesetViewManager tracks it.
- This removes URI management from `behavior-show-more`; it is no longer required, since the ChangesetViewManager knows how to render.
- This removes "whitespace" since this is handled properly by the view manager.
Test Plan:
- Used "Show Top" / "Show All" / "Show Bottom" in 1-up and 2-up views.
- Changed file highlighting to rainbow, loaded stuff, saw rainbow stick.
- Used "Show Entire File" in 1-up and 2-up views.
- Saw loading chrome.
- No loading chrome normally.
- Made inlines, verified `copyRows()` code runs.
- Poked around Diffusion -- it is missing some parameter handling, but works OK.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11977
Summary:
Ref T2009. This clears the stage for D11977.
Specifically, D11977 moves "show context" logic into ChangesetViewManager, but those objects won't exist if we don't run "behavior-populate" first.
Generally, this increases consistency across changeset views -- which is still very low overall, but getting slightly better.
Both of these should probably move up more and use ChangesetListView, but we don't need to do that quite yet.
Test Plan:
- Took changeset actions in Phriction diff view.
- Took changeset actions in Differential standalone view.
- Took changeset actions in normal Differential view.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11978
Summary:
Ref T2009. This basically copy/pastes them for now. Plans is:
- Make this actually work all the way.
- Add test coverage after D11970.
- Move 2-up here after test coverage.
Clicking the links does not work yet, because they use the 2-up renderer. I'll fix this in the next diff.
Test Plan: Viewed diffs in unified, saw links to show more.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11976
Summary: Ref T2009. Remove forced min-width of 780px in 1-up mode, and tweak a few other things to look better.
Test Plan: Looks better on mobile.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11974
Summary: Ref T2009. These aren't good enough to actually use so I won't land this yet, but it makes testing changes a lot easier.
Test Plan:
- Swapped setting.
- Loaded revisions.
- Saw setting respected.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2009
Differential Revision: https://secure.phabricator.com/D11972
Summary:
See D11468 and D11465. Fixes T5163. Fixes T4105. This makes it practical to test shields, unshielding, moves, etc.
This fixes the issue in D11468, where line maps from whitespace-ignored hunks could have fewer lines than line maps from whitespace-respected hunks, causing a warning.
This encodes the behavior which D11465 changed, making it the canon behavior. Specifically, we do **not** show a shield. I think this is correct. It seems misleading to show "the contents of this file were not changed", because they were changed in both the sense that the file was completely removed, and also changed in the sense that the content itself was (or may have been) changed at the destination. Instead, we just show nothing.
Test Plan:
- Added test coverage.
- Ran tests.
- Used `arc diff --raw --browse` to verify that web behavior was consistent with CLI/test behavior.
Reviewers: joshuaspence, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4105, T5163
Differential Revision: https://secure.phabricator.com/D11970
Summary: Since this element isn't strictly about errors, re-label as info view instead.
Test Plan: Grepped for all callsites, tested UIExamples and a few other random pages.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11867
