Summary:
See <https://discourse.phabricator-community.org/t/cannot-accept-commits-in-audit/2166/>.
In D19842, I changed `PhabricatorEditField->shouldGenerateTransactionsFromComment()`.
- Previously, it bailed on `getIsConduitOnly()`.
- After the patch, it bails on a missing `getCommentActionLabel()`.
The old code was actually wrong, and it was previously possible to apply possibly-invalid actions in some cases (or, at least, sneak them through this layer: they would only actually apply if not validated properly).
In practice, it let a different bug through: we sometimes loaded commits without loading their audit authority, so testing whether the viewer could "Accept" the commit or not (or take some other actions like "Raise Concern") would always fail and throw an exception: "Trying to access data not attached to this object..."
Fixing the insufficiently-strict transaction generation code exposed the "authority not attached" bug, which caused some actions to fail to generate transactions.
This appeared in the UI as either an unhelpful error ("You can't post an empty comment") or an action with no effect. The unhelpful error was because we show that error if you aren't taking any //other// actions, and we wouldn't generate an "Accept" action because of the interaction of these bugs, so the code thought you were just posting an empty comment.
Test Plan: Without leaving comments, accepted and rejected commits. No more error messages, and actions took effect.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: stephan.senkbeil, hskiba
Differential Revision: https://secure.phabricator.com/D19845
Summary:
Ref T13216. Ref T13217. Depends on D19800. This fixes all of the remaining query warnings that pop up when you run "arc unit --everything".
There's likely still quite a bit of stuff lurking around, but hopefully this covers a big set of the most common queries.
Test Plan: Ran `arc unit --everything`. Before change: lots of query warnings. After change: no query warnings.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13217, T13216
Differential Revision: https://secure.phabricator.com/D19801
Summary:
Depends on D19656. Ref T13197. See PHI851.
- This class is now a real object, so get rid of the "Constants" part of the name.
- Rename it for greater consistency with other modern objects.
- Get rid of the `MODERN_` tag now that the old constants are gone.
Test Plan: Bunch of `grep`, browsed around.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19657
Summary: Depends on D19652. Ref T13197. See PHI851. This migrates the actual `auditStatus` on Commits, and older status transactions.
Test Plan:
- Ran migrations.
- Spot-checked the database for sanity.
- Ran some different queries, got unchanged results from before migration.
- Reviewed historic audit state transactions, and accepted/raised concern on new audits. All state transactions appeared to generate properly.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19655
Summary: Ref T13197. We're almost ready to migrate: let the Query accept either older integer values or new string values. Then move some callsites to use strings.
Test Plan: Called `audit.query`, browsed audits, audited commits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19650
Summary: Ref T12164. Make it easier to work with identity objects by attaching them to commits and attaching users to identities.
Test Plan: Loaded some commits with `->needIdentities(true)` and checked the resulting objects.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19491
Summary:
Ref T13137. See PHI609. An install would like to filter audit requests on a particular branch, e.g. "master".
This is difficult in the general case because we can not apply this constraint efficiently under every conceivable data shape, but we can do a reasonable job in most practical cases.
See T13137#238822 for more detailed discussion on the approach here.
This is a bit rough, but should do the job for now.
Test Plan:
- Filtered commits by various branches, e.g. "master"; "lfs". Saw correct-seeming results.
- Stubbed out the "just list everything" path to hit the `diffusion.internal.ancestors` path, saw the same correct-seeming results.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13137
Differential Revision: https://secure.phabricator.com/D19431
Summary:
Ref T12680. See PHI167. See that task for discussion.
Rewrite `DiffusionCommitQuery` to work more like `DifferentialRevisionQuery`, and use a UNION to find "all revisions you need to audit OR respond to".
I tried to get this working a little more cleanly than RevisionQuery does, and can probably simplify that now.
Test Plan: Poked at the UI locally without hitting any apparent issues, but my local data is pretty garbage at this point. I'll take a look at how the query plans work on `secure`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12680
Differential Revision: https://secure.phabricator.com/D18722
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary:
Ref T10978. I'm inching toward cleaning up our audit state. Two issues are:
- Authored commits show up in "Ready to Audit", but should not.
- Unreachable commits (like that stacked of unsquashed stuff) show up too, but we don't really care about them.
Kick authored stuff out of the "Ready to Audit" bucket and hide unreachable commits by default, with constraints for filtering. Also give them a closed/disabled/strikethru style.
Test Plan:
- Viewed audit buckets.
- Searched for reachable/unreachable commits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17279
Summary: Ref T10978. This code (mostly related to the old ADD_AUDIT transaction and some to the "store English text in the database" audit reasons) is no longer reachable.
Test Plan:
Grepped for removed symbols:
- withAuditStatus
- getActionNameMap (unrelated callsites exist)
- getActionName (unrelated callsites exist)
- getActionPastTenseVerb
- addAuditReason
- getAuditReasons
- auditReasonMap
Also audited some commits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17267
Summary:
Ref T10978. Currently, during commit import, we write an "Audit Not Required" auditor for commits which don't require an audit.
This auditor is used to power the "Commits in this package" query in Owners.
This conflates audits and commit/package membership. I think it might even predate edges. Code needs to dance around this mess and we get the wrong result in some cases, since auditors are now editable.
Instead, write an explicit edge which just says "this commit is part of such-and-such packages". Then use that to run the query. Logical!
I'll issue guidance on this but I'm not migrating it, since it fixes itself going forward and only really affects the UI in Owners.
Test Plan:
- Ran `bin/audit update-owners` with various arguments.
- Viewed packages in web UI, saw them load the proper commits.
- Queried by packages in Diffusion explicitly.
- Clicked the "View All" link in Owners and got to the right search UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17264
Summary: Fixes T6660. Uses the new stuff in Audit to build an EditEngine-aware icon.
Test Plan: {F2364304}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6660
Differential Revision: https://secure.phabricator.com/D17208
Summary:
Fixes T9430. Fixes T9362. Fixes T9544. This changes the default view of Audit to work like Differential, where commits you need to audit or respond to are shown in buckets.
This is a bit messy and probably needs some followups. This stuff has changed from a compatibility viewpoint:
- The query works differently now (but in a better, modern way), so existing saved queries will need to be updated.
- I've removed the counters from the home page instead of updating them, since they're going to get wiped out by ProfileMenu soon anyway.
- When bucketed queries return too many results (more than 1,000) we now show a warning about it. This isn't greaaaat but it seems good enough for now.
Test Plan: {F2351123}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9430, T9362, T9544
Differential Revision: https://secure.phabricator.com/D17192
Summary:
Fixes T10721. When trying to load commits by identifier, we would take some bad pathways in Subversion if the repository had no callsign and end up missing the commits.
Fix this logic so it works for either callsigns (e.g., if passed `rXyyy`) or with PHIDs if passed repositories.
Test Plan:
- Viewed SVN commit in a Subversion repository with no callsign.
- Added a callsign, looked at it again.
- Viewed non-SVN commits in callsign and non-callsign repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10721
Differential Revision: https://secure.phabricator.com/D15607
Summary:
Ref T2450. File blame tends to have the same commit a lot of times, and we don't do lookups like this efficiently right now.
In particular, for a file like `__phutil_library_map__.php`, we would issue a query with ~9,000 clauses like this:
```
(repositoryID = 1 AND commitIdentifier LIKE "XYZ%")
```
...but only a few hundred of those identifiers were unique. Instead, issue only one clause per unique identifier.
MySQL also seems to do a little better on "commitIdentifier = X" if we have the full hash, so special case that slightly.
Test Plan:
- Issuing a query for only unique identifiers dropped the cost from 400ms to 100ms locally.
- Swapping to `=` if we have the full hash dropped the cost from 100ms to 75ms locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2450
Differential Revision: https://secure.phabricator.com/D14962
Test Plan: chain another call after this
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D14364
Summary:
Fixes T9279. Modernizes the SearchEngine and Query classes. User-facing changes:
- Added order by commit date, default to order by commit date with newest commits first.
- Added explicit "Needs Audit by".
- Added new `packages(...)` typeahead function.
- Picked up automatic subscribers, projects, and order fields.
This changes behavior a little bit: we previously attempted to exclude, e.g., commits which a package you own needs to audit, but which you have resigned from. This is difficult in general and I think it needs a more comprehensive solution. This shouldn't impact users much, anyway.
Test Plan: {F767628}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9279
Differential Revision: https://secure.phabricator.com/D14013
Summary: Fixes T6839. Sometimes, worker tasks go astray for whatever reason. This automates the step of `bin/repository importing | xargs | mangle mangle | bin/repostiory reparse`.
Test Plan: Ran various flavors of the command, got good looking results.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6839
Differential Revision: https://secure.phabricator.com/D13362
Summary:
Ref T4345. This error is per object-type in the query implementations, not a mail/permissions issue.
Without `didRejectResult()`, we can't distinguish between "restricted" and "unknown" for objects filtered by `willFilterPage()`.
- Call `didRejectResult()` on commits.
- Make `didRejectResult()` handle both existing policy exceptions and filtering.
- Recover from partial objects (like commits) which are missing attached data required to figure out policies.
Test Plan: Saw "Restricted Diffusion Commit" instead of "Unknown Object (Diffusion Commit)" when viewing nonvisible commit handle in Maniphest.
Reviewers: btrahan, joshuaspence
Reviewed By: joshuaspence
Subscribers: epriestley
Maniphest Tasks: T4345
Differential Revision: https://secure.phabricator.com/D13289
Summary:
Ref T4100. Ref T5595. This allows PolicyAwareQuery to write all the logic for AND, OR, NOT, and NULL (i.e., "not in any projects") queries against any edge type.
It accepts an edge type and a list of constraints (which are basically just operator-value pairs, like `<NOT, PHID-X-Y>`, meaning the results must not have an edge connecting them to `PHID-X-Y`).
This doesn't actually do anything yet; see future diffs.
Test Plan: `arc unit --everything`
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4100, T5595
Differential Revision: https://secure.phabricator.com/D12455
Summary:
Ref T4100. Ref T5595. These functions are trivial for now, but move us toward being able to define more default query behavior by default.
Future changes will give these methods meaningful, nontrivial behaviors.
Test Plan: `arc unit --everything`
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5595, T4100
Differential Revision: https://secure.phabricator.com/D12454
Summary:
Ref T4100. Ref T5595.
To support a unified "Projects:" query across all applications, a future diff is going to add a set of "Edge Logic" capabilities to `PolicyAwareQuery` which write the required SELECT, JOIN, WHERE, HAVING and GROUP clauses for you.
With the addition of "Edge Logic", we'll have three systems which may need to build components of query claues: ordering/paging, customfields/applicationsearch, and edge logic.
For most clauses, queries don't currently call into the parent explicitly to get default components. I want to move more query construction logic up the class tree so it can be shared.
For most methods, this isn't a problem, but many subclasses define a `buildWhereClause()`. Make all such definitions protected and consistent.
This causes no behavioral changes.
Test Plan: Ran `arc unit --everything`, which does a pretty through job of verifying this statically.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, hach-que, epriestley
Maniphest Tasks: T4100, T5595
Differential Revision: https://secure.phabricator.com/D12453
Summary: Fixes T6880. If matching commits have no visible/loadable repository, we shouldn't keep going forward in the loop.
Test Plan: Havne't built a repro locally yet so not 100% sure this fixes it.
Reviewers: btrahan, mbishopim3, fabe
Reviewed By: mbishopim3, fabe
Subscribers: mbishopim3, epriestley
Maniphest Tasks: T6880
Differential Revision: https://secure.phabricator.com/D11251
Summary:
Ref T4245 Make repo callsigns optional
This is far from done and still very ugly. I'm just submitting it to check if i'm solving this in the right places.
Right now there's three places with duplicate code and building the identifierMap in the CommitQuery is very ugly.
If we only want to support this in the user frontend then i could hack it into the Markup rule itself and not touch the CommitQuery. Even uglier but more limited in scope...
Generally this approach will need a lot of "check this first and then try the other" in a few places.
I could move the Repository queries into a specialised PhabricatorRepositoryQuery method (withCallsignOrID) but i'm not sure about that.
Test Plan:
- phid.lookup works with R1 and rTEST (which is the same repo)
- R1 and rTEST euqally work in remarkup (tested in comments).
- Reviewed the following syntax also all works:
rTEST
rTESTd773137a7cb9
rTEST:d773137a7cb9
R1
R1:d773137a7cb9
d773137a7cb9
{rTEST}
{rTESTd773137a7cb9}
{rTEST:d773137a7cb9}
{R1}
{R1:d773137a7cb9}
{d773137a7cb9}
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D11050
Summary: Fixes T5871. These queries get to use the actual column on the commit table since they are about the "aggregate" state of different audits.
Test Plan: issues queries and got sensible results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5871
Differential Revision: https://secure.phabricator.com/D10271
Summary: Ref T5862. makes the exception work better
Test Plan: issued some queries from audit ui with and without repos - they worked
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5862
Differential Revision: https://secure.phabricator.com/D10268
Summary: Fixes T5862. The Diffusion table uses `id` but all the other infrastructure uses `phid` so just do a quick load of the repositories to get the ids. Long term, we should re-key the table by phid I think.
Test Plan: made a query with a repository and got a proper result set
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5862
Differential Revision: https://secure.phabricator.com/D10245
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary:
Ref T4715. Some minor stuff I caught locally while poking around:
- Since we don't `GROUP BY`, we can still get duplicate commits. These get silently de-duplicated by `loadAllFromArray()` because that returns an array keyed by `id`, but we fetch too much data and this can cause us to execute too many queries to fill pages. Instead, `GROUP BY` if we joined the audit table.
- After adding `GROUP BY`, getting the audit IDs out of the query is no longer reliable. Instead, query audits by the commit PHIDs. This is approximately equiavlent.
- Since we always `JOIN`, we currently never return commits that don't have any audits. If we don't know that all results will have an audit, just `LEFT JOIN`.
- Add some `!== null` to catch the `withIDs(array())` issue that we hit with Khan Academy a little while ago.
Test Plan:
- Verified that "All Commits" shows commits with no audits of any kind.
- Verified that the raw data comes out of the query without duplicates.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5433, T4715
Differential Revision: https://secure.phabricator.com/D8879
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary:
Ref T2683. Further reduces query count of last modified loads; we're now at 11 instead of 200+.
(This works in SVN but could be further optimized.)
Test Plan:
Loaded SVN, Mercurial, Git:
{F34864}
{F34865}
{F34866}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, vrana, aran
Maniphest Tasks: T2683
Differential Revision: https://secure.phabricator.com/D5256
Summary:
Fixes T4911. See D8879. This gives us the correct query in cases where there are no audits.
This doesn't try to do the GROUP BY stuff yet.
Test Plan:
- Viewed a commit in Diffusion with no audits, got a commit detail page.
- Viewed "All Commits" in web UI, saw commits without any audits included in the list.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4911
Differential Revision: https://secure.phabricator.com/D8882
Summary: ...also kills off "PhabricatorAuditCommitQuery" and "PhabricatorAuditQuery", by moving the work to "DiffusionCommitQuery". Generally cleans up some code around the joint on this too. Also provides policies for audit requests, which is basically the policy for the underlying commit. Fixes T4715. (For the TODO I added about files, I just grabbed T4713.)
Test Plan:
Audit: verified the three default views all showed the correct things, including highligthing. did some custom queries and got the correct results.
Diffusion: verified "blame view" still worked. verified paths were highlighted for packages i owned.
Home: verified audit boxes showed up with proper commits w/ audits
bin/audit: played around with it via --dry-run and got the right audits back
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: chad, epriestley, Korvin
Maniphest Tasks: T4715
Differential Revision: https://secure.phabricator.com/D8805
Summary:
Fixes T4344. `diffusion.getcommits` is nasty old bad news. Implement a modern query method.
This method provides limit/paging in a somewhat abstract way so it's sort of ultramodern, but I didn't want the default behavior to return a million rows. I'll probably move more stuff toward this over time, now that cursor paging is pervasive. Here, we needed extra metadata (the identifier map) anyway.
Test Plan: Used console to execute command.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4344
Differential Revision: https://secure.phabricator.com/D8077
Summary: Currently we markup `rXabcd`, but not `rX` on its own. Mark these up as repository object names.
Test Plan: Typed `rPOEMS`, `rPOEMS1`, `rPOEMS139893189`, etc.
Reviewers: btrahan, dctrwatson
Reviewed By: btrahan
CC: aran, poop
Differential Revision: https://secure.phabricator.com/D7859
Summary:
Fixes T4067. The way `DiffusionCommitQuery` works prevents it from loading SVN identifiers in some cases without additional constraints, since "12345" might be an SVN revision 12345, or it might be the first 5 characters of a Git commit hash.
Introduce `withRepository()` as a shorthand for `withDefaultRepository()` + `withRepositoryIDs()`. This tells the query to:
- Only look in the given repository; and
- use the more liberal identifier resolution rules while doing so.
The practical impact this has is that blame tooltips in SVN work again. The other queries which are fixed here were never run in SVN (which doesn't have first-class branches or tags); I've cleaned them up only for completeness.
Test Plan:
- Viewed blame in SVN, saw information again instead of empty tooltip.
- Viewed brnaches/tags in Mercurial and Git.
{F79226}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4067
Differential Revision: https://secure.phabricator.com/D7523
Summary:
Ref T2716.
- Serve from `DiffusionCommitQuery`, not `PhabricatorAuditCommitQuery` (which should probably die).
- Fix logic for `limit`, which incorrectly failed to display the "Showing %d branches." text.
- Clean up things a touch.
- I didn't end up actually needing `needCommitData()`, but left it in there since I think it will be needed soon.
- Removed a "TODO" because I don't remember what "etc etc" means.
Test Plan: Looked at branches in several repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2716
Differential Revision: https://secure.phabricator.com/D7451
Summary:
While we mostly have reasonable effective object accessibility when you lock a user out of an application, it's primarily enforced at the controller level. Users can still, e.g., load the handles of objects they can't actually see. Instead, lock the queries to the applications so that you can, e.g., never load a revision if you don't have access to Differential.
This has several parts:
- For PolicyAware queries, provide an application class name method.
- If the query specifies a class name and the user doesn't have permission to use it, fail the entire query unconditionally.
- For handles, simplify query construction and count all the PHIDs as "restricted" so we get a UI full of "restricted" instead of "unknown" handles.
Test Plan:
- Added a unit test to verify I got all the class names right.
- Browsed around, logged in/out as a normal user with public policies on and off.
- Browsed around, logged in/out as a restricted user with public policies on and off. With restrictions, saw all traces of restricted apps removed or restricted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7367
Summary: Ref T2716. Ref T2715. Move CMIT to use Application PHIDs. Nothing too special here, but I consolidated some code into DiffusionCommitQuery. Depends on D6514.
Test Plan: Browsed Diffusion. Browsed Differential/Maniphest with linked commits. Used jump nav; used `phid.lookup` and `phid.query`. Used remarkup for Git and SVN repos. Grepped for PHID_TYPE_CMIT.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2715, T2716
Differential Revision: https://secure.phabricator.com/D6515
Summary: Ref T3377. MySQL ignores indexes if we hand it mismatched datatypes. This seems colossally dumb, but give it what it expects.
Test Plan: wat
Reviewers: wez, btrahan
Reviewed By: wez
CC: aran
Maniphest Tasks: T3377
Differential Revision: https://secure.phabricator.com/D6201
Summary: Currently this is fairly hard-coded. Instead, make it use available receivers. Ref T1205.
Test Plan: Used mail form to send mail to various objects (Dnn, Tnn, Cnn, etc.). Only some of these work right now because the receiver thing still hard-codes a bunch of junk.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1205
Differential Revision: https://secure.phabricator.com/D5944
Summary:
Ref T1751. This still doesn't do anything very interesting, but loads the acutal Commit objects that a commit message claims to revert.
The only tricky thing here is that we need to interpret "reverts rnnn" or "reverts nnn" in an SVN repository as "reverts rXnnn", where "X" is the current repository. This adds a method to do allow `DiffusionCommitQuery` to do that.
Test Plan:
Used `reparse.php --message` to reparse several commits with revert language and verify they loaded the correct affected commits.
In an SVN repository, created a commit with ambiguous revert language ("reverts n", "reverts rn", "reverts n, n") and verified it identified the affected commits correctly despite ambiguity.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1751
Differential Revision: https://secure.phabricator.com/D5842
Summary:
If someone provides an invalid svn rev number (like providing a git commit
hash instead) for a diffusion commit, we should ignore it like we ignore
other bad input to DiffusionCommitQuery, instead of barfing.
Test Plan:
put an invalid blame rev with rEsomehash (where E is an svn repo), and
differential loads.
Reviewers: epriestley, wez
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5389
Summary: It's dumb to execute a query which we know will return an empty result.
Test Plan: Looked at comment preview with "11", didn't see "1 = 0" in DarkConsole.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5177
Summary:
See discussion in D5121. Fixes T2615.
This might cause us more issues if anything is loading commit handles without passing a viewer, but I think I tested all of those cases.
Test Plan: Looked at feed, audit, maniphest, diffusion, differential, owners, repositories.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2615
Differential Revision: https://secure.phabricator.com/D5139
