Summary:
- Add an explicit multiplexing option, and enable it by default. This is necessary for Mail.app to coexist with other clients ("Re:" breaks outlook at the very least, and generally sucks in the common case), and allows users with flexible clients to enable subject variance.
- Add an option for subject line variance. Default to not varying the subject, so mail no longer says [Committed], [Closed], etc. This is so the defaults thread correctly in Gmail (not entirely sure this actually works).
- Add a preference to enable subject line variance.
- Unless all mail is multiplexed, don't enable or respect the "Re" or "vary subject" preferences. These are currently shown and respected in non-multiplex cases, which creates inconsistent results.
NOTE: @jungejason @nh @vrana This changes the default behavior (from non-multiplexing to multiplexing), and might break Facebook's integration. You should be able to keep the same behavior by setting the options appropriately, although if you can get the new defaults working they're probably better.
Test Plan:
Send mail from Maniphest, Differential and Audit. Updated preferences. Enabled/disabled multiplexing. Things seem OK?
NOTE: I haven't actually been able to repro the Gmail threading issue so I'm not totally sure what's going on there, maybe it started respecting "Re:" (or always has), but @cpiro and @20after4 both reported it independently. This fixes a bunch of bugs in any case and gives us more conservative set of defaults.
I'll see if I can buff out the Gmail story a bit but every client is basically a giant black box of mystery. :/
Reviewers: btrahan, vrana, jungejason, nh
Reviewed By: btrahan
CC: cpiro, 20after4, aran
Maniphest Tasks: T1097, T847
Differential Revision: https://secure.phabricator.com/D2206
Summary:
PHP arrays have an internal "current position" marker. (I think because foreach() wasn't introduced until PHP 4 and there was no way to get rid of it by then?)
A few functions affect the position of the marker, like reset(), end(), each(), next(), and prev(). A few functions read the position of the marker, like each(), next(), prev(), current() and key().
For the most part, no one uses any of this because foreach() is vastly easier and more natural. However, we sometimes want to select the first or last key from an array. Since key() returns the key //at the current position//, and you can't guarantee that no one will introduce some next() calls somewhere, the right way to do this is reset() + key(). This is cumbesome, so we introduced head_key() and last_key() (like head() and last()) in D2161.
Switch all the reset()/end() + key() (or omitted reset() since I was feeling like taking risks + key()) calls to head_key() or last_key().
Test Plan: Verified most of these by visiting the affected pages.
Reviewers: btrahan, vrana, jungejason, Koolvin
Reviewed By: jungejason
CC: aran
Differential Revision: https://secure.phabricator.com/D2169
Summary:
The audit tools has many false positive about Author Not
Matching with Revision. The fix is to set the authorPHID which was
missing in the existing code
Test Plan:
run reparse.php and it doesn't generate false positive result
anymore.
Reviewers: nh, epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D2119
Summary:
- The UI is pretty straightforward, since Handle just works (tm)
- Added two methods to the owners object to handle the new layer of
indirection. Then ran git grep PhabricatorOwnersOwner and changed
callsites as appropriate.
Sending this to get a round of feedback before I test the non-trivial
changes in this diff.
Test Plan:
- owners tool: edit, view, list for basic functionality.
- phlog for the two new methods I added
Reviewers: epriestley, blair, jungejason
CC: aran
Differential Revision: https://secure.phabricator.com/D2079
Summary: NOTE: This is not produced by a script so there might be errors. Please review carefully.
Test Plan: Browse around.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D2091
Summary:
- Show the canonical (i.e., shorter) commit identifier in the subject.
- For commits without a revision, put the commit summary in the subject.
Test Plan: Ran "scripts/repository/reparse.php <commit> --herald" for a number of different commits (with revision, without revision); got more useful email subjects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T1028
Differential Revision: https://secure.phabricator.com/D2004
Summary: Apparently I spent like a good month copy/pasting slightly different versions of this logic all over the codebase.
Test Plan: Selected "View Options -> Browse in Diffusion" for a chagneset, got a URI with a branch name in it under Git.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1993
Summary:
Currently, we use "git log" to detect the change list for all commits, but this produces no output for merge commits.
Instead, parse them as changes against the first parent (the merge destination). This produces generally sensible/expected behavior, and is consistent with what GitHub does.
We need to special-case the first commit because it doesn't have parents.
NOTE: This is a parser change so you need to run `./scripts/repository/reparse.php --all <callsign> --change` to reparse merge commits in already-imported repositories after updating.
Test Plan: Reparsed a merge commit, a non-merge commit, and the first commit in the Phabricator repository.
Reviewers: btrahan, gschmidt
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T961
Differential Revision: https://secure.phabricator.com/D1985
Summary: We need to build a request in order to pick up an appropriate default branch name, instead of using the raw static generator.
Test Plan: Clicked a symbol link, got /master/path/blahblah
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1982
Summary:
Diffusion request/uri handling is currently a big, hastily ported mess. In particular, it has:
- Tons and tons of duplicated code.
- Bugs with handling unusual branch and file names.
- An excessively large (and yet insufficiently expressive) API on DiffusionRequest, including a nonsensical concrete base class.
- Other tools were doing hacky things like passing ":" branch names.
This diff attempts to fix these issues.
- Make the base class abstract (it was concrete ONLY for "/diffusion/").
- Move all URI generation to DiffusionRequest. Make the core static. Add unit tests.
- Delete the 300 copies of URI generation code throughout Diffusion.
- Move all URI parsing to DiffusionRequest. Make the core static. Add unit tests.
- Add an appropriate static initializer for other callers.
- Convert all code calling `newFromAphrontRequestDictionary` outside of Diffusion to the new `newFromDictionary` API.
- Refactor static initializers to be sensibly-sized.
- Refactor derived DiffusionRequest classes to remove duplicated code.
- Properly encode branch names (fixes branches with "/", see <https://github.com/facebook/phabricator/issues/100>).
- Properly encode path names (fixes issues in D1742).
- Properly escape delimiter characters ";" and "$" in path names so files like "$100" are not interpreted as "line 100".
- Fix a couple warnings.
- Fix a couple lint issues.
- Fix a bug where we would not parse filenames with spaces in them correctly in the Git browse query.
- Fix a bug where Git change queries would fail unnecessarily.
- Provide or improve some documentation.
This thing is pretty gigantic but also kind of hard to split up. If it's unreasonably difficult to review, let me know and I can take a stab at it though.
This supplants D1742.
Test Plan:
- Used home, repository, branch, browse, change, history, diff (ajax), lastmodified (ajax) views of Diffusion.
- Used Owners typeaheads and search.
- Used diffusion.getrecentcommitsbypath method.
- Pushed a change to an absurdly-named file on an absurdly-named branch, everything worked properly.
{F9185}
Reviewers: nh, vrana, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1921
Summary:
See <https://github.com/facebook/phabricator/issues/102>. Between Feb 1 and Mar 1, the hg released changed the exit code behavior of "hg pull". This broke us mildly (and a bunch of other applications more severely, which is why it was reverted).
Detect the common case of this (english) and don't fail.
Test Plan: @killermonk, can you try applying this? I'll try to do an upgrade to 2.1 and see if I can also do a proper test.
Reviewers: Makinde, btrahan, killermonk
Reviewed By: btrahan
CC: killermonk, aran, epriestley
Differential Revision: https://secure.phabricator.com/D1948
Summary:
T937 suggests 'inset' could have its own view controller.
It has the following methods:
- setTitle for title
- setRightbutton if you have to place something (preferably a button)
on the right side of the form
- setDescription if you want to describe what it does
- setContent for the main content
- addDivAttributes REALLY not sure about this one but it had to be included
because of a single controller (see owners/controller/edit/PhabricatorOwnersEditController.php:238)
- appendChild works as usual if your form is complex but you still want to remove
->appendChild('<div class..') ->appendChild('</div>');
It might be an overkill so maybe some could be dropped:
- addDivAttributes() and just rewrite how PhabricatorOwnersEditController.php works
- setContent() and use appendChild for the main content?
Test Plan:
- Looked at the controllers in phabricator
- Changed the controller
- Opened the page in another tab
- If something didnd't look the same I fixed it.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1926
Summary: Last of the big final patches. Left a few debatable classes (12 out of about 400) that I'll deal with individually eventually.
Test Plan: Ran testEverythingImplemented.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T795
Differential Revision: https://secure.phabricator.com/D1881
Summary:
svn 1.7 changed their xml format slightly, they now have a
##<?xml version="1.0" encoding="UTF-8"?>## tag instead of
##<?xml version="1.0"?>##. This relaxes matching this tag.
Test Plan: ./scripts/repository/reparse.php rE521979 --change
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1866
Summary: We've hit a couple of these in the wild, raise better error messages when the local repo is toast / broken / nonsense.
Test Plan: Broke my local repo in all of the different ways we test for, verified I got an error message in each case.
Reviewers: btrahan, abirchall
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T964, T924
Differential Revision: https://secure.phabricator.com/D1855
Summary:
These are all unambiguously unextensible. Issues I hit:
- Maniphest Change/Diff controllers, just consolidated them.
- Some search controllers incorrectly extend from "Search" but should extend from "SearchBase". This has no runtime effects.
- D1836 introduced a closure, which we don't handle correctly (somewhat on purpose; we target PHP 5.2). See T962.
Test Plan: Ran "testEverythingImplemented" unit test to identify classes extending from `final` classes. Resolved issues.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T795
Differential Revision: https://secure.phabricator.com/D1843
Summary:
I'm on a host where I have the PhabricatorRepositoryPullLocalDaemons
tracking a remote repo. In my case, these end up as local git repos in
/var/repo/$name.
I'm working on another daemon that is going to automatically make
changes and commit them back upstream. I figured it would be best to do
this in a new local repo. I'll put these in /var/repo-clones/$name.
It's nice to use the exec*() functions in PhabricatorRepository, so the
approach I thought of was to load the PhabricatorRepository object from
the database, then change its localPath to point at the
/var/repo-clones/$name directory instead.
I didn't really want to change the local-path detail with setDetail(),
as that risks committing the change upstream. It's nice to use the
repo's execLocalCommand() methods though, hence wanting to change the
local path.
Test Plan: None yet.
Reviewers: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1821
Summary: We'll keep deleted branches around right now because Git's behavior is not to remove them without --prune.
Test Plan: Ran "git fetch --all --prune" to make sure it at least ostensibly works.
Reviewers: btrahan, 20after4
Reviewed By: 20after4
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1833
Summary: We currently parse these as directory changes and discard them. Instead, parse them as a new "SUBMODULE" type of change.
Test Plan:
- Reparsed a commit which changes submodules and verified it parses correctly.
- Reparsed a commit which adds submodules and verified it parses correctly.
Reviewers: btrahan, kdeggelman
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1815
Summary:
- Enforce proper workflow rules.
- Fix a derp-bug with patches.
Test Plan:
- Tried to mark a revision I didn't own.
- Tried to mark a revision already marked committed.
- Tried to mark a revision otherwise not accepted.
- Verified daemon can override workflow rules and mark from arbitrary states.
Reviewers: btrahan, Makinde
Reviewed By: Makinde
CC: aran, epriestley
Maniphest Tasks: T948
Differential Revision: https://secure.phabricator.com/D1809
Summary:
Adds an optional "Auditors" field (like "Reviewers") to commit messages which gives installs a zero-config method for making audit requests.
This field does not appear on templates unless set, and is mostly ignored (but validated and preserved) by Differential.
It is then parsed by the daemons if present, and audit requests are pushed to valid users.
Test Plan: Made an "Auditors" commit and verified it was retained with "arc amend --show". Pushed it and verified the audit was triggered.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904, T880
Differential Revision: https://secure.phabricator.com/D1793
Summary:
- Move table to Repository, since we have no Owners joins in the application anymore but would like to do a Repository join.
- Rename "packagePHID" to "auditorPHID", since this column may contain package, project, or user PHIDs.
Test Plan:
- Browsed Owners, Audit, and Differential interfaces to the Audit tool.
- Made comments and state changes.
- Ran "reparse.php --herald --owners" on several commits.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley, nh, vrana
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1787
Summary:
- Users may elect to receive an initial notification about a commit; allow it to be replied to in order to interact with the object.
- Share thread headers between emails.
- Add the "REPLY HANDLER ACTIONS" section to both emails.
Test Plan:
- Used "reparse.php --herald" to trigger herald emails, verified reply-to and email body.
- Made audit comments, verified body.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1762
Summary:
- Add a proper mailKey field to make these things mailable. Backfill all
existing objects.
- Denormalize authorPHID to the commit object so we can query by it
efficiently in a future diff. We currently use the search engine to drive
"commits by author" but that's not so good for audit, which needs more
constraints.
- Add an overall audit status field so we can efficiently query "commits that
needs your attention".
- Add enough code to convince myself that these fields are basically
reasonable and work correctly.
Test Plan:
- Ran schema upgrades. Checked database state afterward.
- Ran "reparse.php --owners --herald" to verify worker changes.
- Looked at a commit, altered aggregate status via audits / reparse.php,
verified it responded correctly.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley, nh
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1706
Summary: See D1707 -- just in case the Phabricator server is configured
suspiciously.
Test Plan: Cursory inspection.
Reviewers: Makinde, btrahan
Reviewed By: Makinde
CC: aran, epriestley
Maniphest Tasks: T922
Differential Revision: https://secure.phabricator.com/D1708
Summary:
When users submit an audit, send email to relevant parties informing them.
Allow email to be replied to. Just basic support so far; no "!raise" stuff and
no threading with the Herald commit notification.
Test Plan: Made comments, got email. Replied to email, got comments.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1698
Summary: Add audit information to the commit search index.
Test Plan: Updated a commit, searched for terms in its comments, got hits.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1696
Summary:
Allows you to write a commit rule that triggers an audit by a user (personal
rules) or a project (global rules).
Mostly this is trying to make auditing more lightweight and accessible in
environments where setting up Owners packages doesn't make sense.
For instance, Disqus wants a rule like "trigger an audit for everything that
didn't have a Differential revision". While not necessarily scalable, this is a
perfectly reasonable rule for a small company, but a lot of work to implement
with Owners (and you'll get a lot of collateral damage if you don't make every
committer a project owner).
Instead, they can create a project called 'Unreviewed Commits' and write a rule
like:
- When: Differential revision does not exist
- Action: Trigger an Audit for project: "Unreviewed Commits"
Then whoever cares can join that project and they'll see those audits in their
queue, and when they approve/raise on commits their actions will affect the
project audit.
Similarly, if I want to look at all commits that match some other rule (say,
XSS) but only want to do it like once a month, I can just set up an audit rule
and go through the queue when I feel like it.
NOTE: This abuses the 'packagePHID' field to also store user and project PHIDs.
Through the magic of handles, this (apparently) works fine for now; I'll do a
big schema patch soon but have several other edits I want to make at the same
time.
Also:
- Adds an "active" fiew for /audit/, eventually this will be like the
Differential "active" view (stuff that is relevant to you right now).
- On commits, highlight triggered audits you are responsible for.
Test Plan: Added personal and global audit triggers to Herald, reparsed some
commits with --herald, got audits. Browsed all audit interfaces to make sure
nothing exploded. Viewed a commit where I was responsible for only some audits.
Performed audits and made sure the triggers I am supposed to be responsible for
updated properly.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1690
Summary:
@rguerin ran into an issue in his install where Phabricator appears to have
discovered commits which no longer exist, and thus is failing to proceed with
its repository import.
It's not clear how we got into this state. Previously, it was possible by, e.g.,
parsing a different repository's working copy and then switching them back, but
there are now safeguards against that.
I'm taking a three-pronged approach to try to sort this out:
- Provide a script to get out of this state (this script) and reconcile
Phabricator's view of a repository with an authoritative copy of it. This
basically "un-discovers" any discovered commits which don't actually exist (any
queued tasks to parse them will fail permanently when they fail to load the
commit object).
- Add more logging to the discovery daemon so we can figure out where commits
came from.
- Improve Diffusion's UI when stuff is partially discovered (T776).
(This script should also clean up some nonsense on secure.phabricator.com from a
botched Diviner import.)
Test Plan: Ran "reconcile.php" with bogus commits and bogus differential/commit
links, had them expunged. Will work with @rguerin to see if this resolves
things.
Reviewers: btrahan, rguerin
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1552
Summary:
Fix two issues in PhabricatorRepositoryCommitOwnersWorker:
- if a commit was reviewed by some owner of the package, it should not be
marked as needing audit
- do not run herald worker when it is not needed (for example, when the
worker is executed from reparse.php)
Test Plan:
reparse a commit which is reviewed by the owner of a package
and verify that it is not marked as needing audit, and herald is not
executed.
Reviewers: nh, epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1496
Summary:
- Only write the <ruleID, phid> row if the rule is a one-time rule.
- Delete all the rows for rules which aren't one-time.
NOTE: This is probably like several million rows for Facebook and could take a
while.
Test Plan:
Added some one-time and every-time rules, ran them against objects, verified
only relevant rows were inserted.
Ran upgrade script against a database with one-time and every-time "ruleapplied"
rows, got the irrelevant rows removed.
Reviewers: nh, btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1484
Summary:
Herald rules may be marked as "one-time". We track this by writing a row with
<ruleID, phid> when we apply a rule.
However, the current test for rule application involves loading every <ruleID,
*> pair. We also always write this row even for rules which are not one-time, so
if there are 100 rules, we'll load 1,000,000 rows after processing 10,000
objects.
Instead, load only the <phid, *> pairs, which are guaranteed to be bounded to at
most the number of rules.
I'll follow up with a diff that causes us to write rows only for one-time rules,
and deletes all historic rows which are not associated with one-time rules.
Test Plan:
Grepped for callsites to loadAllByContentTypeWithFullData(). Ran
rules in test console.
Reviewers: nh, btrahan, jungejason
Reviewed By: nh
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1483
Summary:
- Make some editing operations transaction-oriented, like Maniphest. (This
seems to be a good model, particularly for extensibility.) I'll move the rest of
the editing operations to transactions in future diffs.
- Make transaction-oriented operations publish feed stories.
Test Plan:
- Created a new project.
- Edited an existing project.
- Created a new project via quick create flow from Maniphest.
- Verified feed stories publish correctly.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T681
Differential Revision: https://secure.phabricator.com/D1477
Summary:
enable herald commit rules to have access to auditing info.
Note that the new herald condition I added contains info for the
packages. I thought about using a simpler herald condition like
"Requires audit is true or false" and let it work together with the
existing "Affected package contains any of the package". It doesn't work
because we need the info about the package to decide if the commit
requires audit, but the herald conditions work separately.
Test Plan:
- A commit requiring auditing was detected by a herald rule that checks
the auditing status
- A commit not requiring auditing was not detected by a herald rule
which checks auditing status, but was detected by a rule which doesn't
check the auditing status
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1399
Summary: @s reported an issue with implicit file:// URIs in Git, see P270.
Recognize and handle URIs in this format. For URIs we don't understand, raise an
exception.
Test Plan:
- Added failing tests.
- Fixed code.
- Tests pass.
Reviewers: btrahan, jungejason, s
Reviewed By: s
CC: aran, epriestley, s
Differential Revision: https://secure.phabricator.com/D1362
Phabricator
Summary: ...this breaks without D1328. Used good ole "codemod" to do this
work, with lots of manual edits around 80 chars.
Test Plan: clicked around phabricator tool suite, particular differential, a
bunch
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1351
Summary:
Provide an easy way to jump to Diffusion from Differential if we have
the data we need to connect them.
Test Plan: Tested menu in linked and unlinked diffs. Used menu item.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley, btrahan
Maniphest Tasks: T309
Differential Revision: https://secure.phabricator.com/D1326
Summary: These seem to work relatively reasonably and don't have any known
deal-breaking failures.
Test Plan: shrug~
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Differential Revision: https://secure.phabricator.com/D1324
corresponding ConduitAPI
Summary: reasonable title... also made this new functionality used by the
repository worker for parsing diffs
Test Plan:
- looked at the conduit console and queried for various types of hashes,
including hashes with no match. got correct results.
- identified a reasonable diff from a local git repo. set the revision status
to 2 (ACCEPTED) in the database. augmented the worker parser code to var_dump
and die after finding revision id. ran scripts/repository/reparse.php
--message rX and verified my var_dumps. removed var_dumps and die and ran
reparse.php again with same paramters. verified revision looked good in
diffusion and there were no errors.
- repeated the above reparse.php jonx for a mercurial repo. note svn isn't in
this hash game so that test was particularly exciting no-op'dness i did not
bother with
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, btrahan, epriestley
Differential Revision: https://secure.phabricator.com/D1315
Summary:
Some installs use Git as the backbone of a CI framework or use a Git remote to
share patches. The tracker scripts currently recognize associated revisions as
"Committed" when they appear in any branch, even if that branch is
"alincoln-personal-development_test_hack" or whatever.
To address the broadest need here, allow Git repositories to be configured to
track only certain branches instead of all branches.
This doesn't allow you to import a branch into Diffusion but ignore it in
Differential. Supporting that is somewhat technically complicated because the
parser currently goes like this:
- Look at HEAD of all branches.
- For any commits we haven't seen before, follow them back to something we
have seen (or the root).
- "Discover" everything new.
Since this doesn't track <branch, commit> pairs, we currently don't have enough
information to tell when a commit appears in a branch for the first time, so we
don't have anywhere we can put a test for whether that branch is tracked and do
the Differential hook only if it is.
However, I think this cruder patch satisfies most of the need and is simple and
obvious in its implementation.
See also D1263.
Test Plan:
- Updated a Git repository with various filters: "", "master, remote", "derp",
" ,,, master ,,,,,"
- Edited SVN and Mercurial repositories to verify they didn't get caught in
the crossfire.
- Ran daemon in debug mode on libphutil with filter "derp", got exception
about no tracked branches. Ran with filter "master", got tracking. Ran with no
filter, got tracking.
- Looked at Diffusion with "derp" and "master", saw no branches and "master"
respectively.
- Added unit tests to cover filtering logic.
Reviewers: btrahan, jungejason, nh, fratrik
Reviewed By: fratrik
CC: aran, fratrik, epriestley
Maniphest Tasks: T270
Differential Revision: https://secure.phabricator.com/D1290
Summary:
- We have a few places where we do some kind of ad-hoc comma list tokenizing,
and I'm adding another one in D1290. Add a helper to the request object.
- Add some unit tests.
Test Plan:
- Ran unit tests.
- Used PHID manager, Maniphest custom view, and Repository project editor.
Reviewers: btrahan, fratrik, jungejason
Reviewed By: btrahan
CC: aran, btrahan, epriestley
Differential Revision: https://secure.phabricator.com/D1302
Summary:
See T624. I originally wrote this to require an explicit remote, but this
creates an ugly "origin:" in all the URIs and makes T270 more difficult.
Treat all branch names as implying 'origin/'.
Test Plan:
- Pulled and imported a fresh copy of libphutil without issues.
- Browsed various git repositories.
- Browsed Javelin's various branches.
- Ran upgrade script, got a bunch of clean 'origin/master' -> 'master'
conversions.
- Tried to specify an explicit remote in a default branch name.
- Unit tests.
Reviewers: nh, jungejason, btrahan
Reviewed By: btrahan
CC: aran, btrahan
Maniphest Tasks: T624
Differential Revision: https://secure.phabricator.com/D1269
Summary: Allow paths to match even if they differ by trailing slashes and
".git".
Test Plan: Ran unit tests.
Reviewers: jungejason, btrahan
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T710
Differential Revision: https://secure.phabricator.com/D1286
Summary:
- These never actually did anything.
- I don't even really remember why I built them, maybe the Open Source team
was pushing for more GitHub integration or something? I really have no idea.
- Anyway, repository tailers do everything these could do (and much more).
Test Plan:
- Ran tailers off GitHub for many months without needing post-receive hooks.
- Grepped for relevant strings, couldn't find any references.
- Used "Repository" edit interface for a Git repository.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T706
Differential Revision: https://secure.phabricator.com/D1273
Summary:
Git accepts either "git@x:/path" or "ssh://git@x.com/path" URIs to mean the
exact same thing, which is causing some false positives and confusion,
particularly because we sometimes mutate URIs.
Since this is just a sanity check, we don't really care about the username,
domain or credentials -- matching the paths is good enough. We're just trying to
make it hard to shoot yourself in the foot by copy-pasting the same local path
into two repositories and forgetting to change one, like I did. :P
Relax the check to only verify the paths are the same.
Test Plan:
- Ran unit tests, which should fully cover things.
- Ran commit discovery daemon in debug mode on incorrectly and correctly
configured repositories.
Reviewers: ajtrichards, jungejason, btrahan
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T710
Differential Revision: https://secure.phabricator.com/D1279
- Use the computed remote URI (which may have an explicit 'ssh://' under Git in some cases).
- Use '$id' correctly rather than casting the URI to an int in the message parser.
Summary: I want to add a command like "where is ArcanistUnitTestEngine" to
phabot. I also want to add a symbol typeahead to Diffusion and generally finish
up that feature since it's useful but only half-implemented. Consolidate the
query logic and expose the data over Conduit.
Test Plan: Used /symbol/ and Conduit to lookup symbols.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T315
Differential Revision: https://secure.phabricator.com/D1260
Summary:
- Previously, used IDs like "33" to match a commit to a Differential revision.
This has a namespacing problem because we now have an arbitrarily large number
of Phabricator installs in the world, and they may want to track commits from
other installs.
- In Differential, parse raw IDs or full URIs. Emit only full URIs.
- In Repositories, parse only full URIs.
- This might cause a few commits to not be picked up in rare circumstances.
Users can fix them with "arc mark-committed". This should be exceedingly rare
because of hash matching.
- There are some caveats for reparsing older repositories, see comments
inline. I don't think there's much broad impact here.
Test Plan:
- Created a new revision, got a full URI.
- Updated revision, worked correctly.
- Ran unit tests.
- Monkeyed with "Differential Revision" field.
- Reviewers: btrahan, jungejason
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley, jungejason
Maniphest Tasks: T54, T692
Differential Revision: 1250
Summary:
Although I couldn't repro the issue in T692, I did manage to point the "Diviner"
repository at the "Phabricator" working copy and screw some stuff up on
secure.phabricator.com.
Before discovering commits in a repository, ensure the 'origin' remote points at
the configured URI. This prevents issues where the working copy gets configured
to point at an existing (but incorrect) checkout.
Test Plan:
- Ran gitcommitdiscovery daemon normally under "phd debug", saw it execute the
"remote show -n" command and then start working.
- Intentionally botched the config, got an exception:
(Exception) Working copy '/INSECURE/repos/phabricator' has origin URL
'ssh://git@github.com/facebook/phabricator.git', but the configured URL
'git://github.com/facebook/diviner.git' is expected. Refusing to proceed.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T692
Differential Revision: 1253
Summary:
add basic auditing functionalities. For the related commits for a
package, we detect the following conditions which might be suspicious to the
owners of the package:
* no revision specified
* revision not found
* author not match
* reviewedby not match
* owners not involved
* commit author not recognized
The owners of the package can change the status of the audit entries by
accepting it or specify concern.
The owner can turn on/off the auditing for a package.
Test Plan:
* verified that non-owner cannot see the details of the audit and cannot modify
it
* verified that all the audit reasons can be detected
* tested dropdown filtering and package search
* verified really normal change not detected
* verified accept/concern a commit
* tested enable/disable a package for auditing
* verified one audit applies to all <commit, packages> to the packages the
auditor owns
* verified that re-parsing a commit won't have effect if there exists a
relationship for <commit, package> already
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, benmathews, btrahan, mpodobnik, prithvi, TomL, epriestley
Differential Revision: 1242
Summary: These are "local" commands, but need remote credentials. If the daemon
runs as a user who does not have credentials, the initial clone will work but
subsequent updates will fail.
Test Plan:
- Nuked a local copy of a Git repo.
- Ran "phd debug fetch <phid>" as root (or any other user with no natural SSH
keys). Verified initial clone worked (since it passes credentials to the command
correctly).
- Killed daemon, re-ran, verified "fetch" failed (no credentials passed).
- Applied this patch.
- Re-ran "phd debug fetch <phid>", verified it passed credentials and
succeeded.
- Did all these steps for a Mercurial repo.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Maniphest Tasks: T686
Differential Revision: 1236
Summary:
For each commit, find the affected packages, and provide a way to
search by package.
Test Plan:
create commits that touch and don't touch two packages, and verify
that they display correctly in all the UI pages.
Reviewers: epriestley, blair, nh, tuomaspelkonen
Reviewed By: epriestley
CC: benmathews, aran, epriestley, btrahan, jungejason, mpodobnik, prithvi
Maniphest Tasks: T83
Differential Revision: 1208
Summary:
See D1195, which fataled this daemon.
https://secure.phabricator.com/daemon/log/2966/
Test Plan: Applied this patch to secure.phabricator.com, restarted daemon, it
picked up D1203.
Reviewers: btrahan, jungejason, mareksapota
Reviewed By: btrahan
CC: aran, btrahan, mareksapota
Differential Revision: 1204
Test Plan: Commit as not the author and see what shows up.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley, mareksapota, zeeg
Differential Revision: 1195
Summary: make the change, kill the function. be sure to get a good $user or
$viewer variable
Test Plan:
for each controller or view, look at it in the ui. change timezone, refresh ui
and note change. i did not test the OAuthSettingsPanelController; not sure how
to get to that badboy and i got a bit lazy
Maniphest Tasks: T222
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, btrahan, epriestley
Maniphest Tasks: T222
Differential Revision: 1166
Summary:
0d5b0f21ad added string conversion but MBString always needs an argument for endcoding.
It looks like we can get away with doing this in git instead, with the --encoding='UTF-8' flag. Then we should be safe to remove the test for output type, and stay UTF-8 safe.
Test Plan:
Run updaters with change. Verify commits are updated.
Reviewers: epriestley
CC:
Differential Revision: 1108
Test Plan:
used the reparse.php script for reparsing commit messages and saw the
correct author name (and mapped correctly as a phabricator user) in diffusion.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: 1059
Summary:
This adds an encoding detail to the repository, so we can attempt to
convert hunks previously detected as binary.
We also add the encoding information to the arcanist projectinfo
API so we can pull the information if we have it when uploading changes
via arc.
Test Plan:
Changed encoding through the edit UI, and saw "This is binary file", and
changed it back and saw the correct output from the diff.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: 1009
Summary:
Discover commits then return; useful when initializing new repositories
in unit tests.
By which I mean "when initializing a new repository in my unit test that
I'm working on".
Test Plan: Using this in a PhabricatorTestCase.
Reviewers: epriestley, aran
Reviewed By: epriestley
CC: aran, edward, epriestley
Differential Revision: 948
transactional mail
Summary: See T571. SES refuses to deliver mail with this header and there are
various reports of other issues on the internet so I'm defaulting it to off.
Test Plan: Set config to true, tried to send mail, SES rejected it because of
"Precedence: bulk" header.
Reviewers: bmaurer, ola, jungejason, nh, aran
Reviewed By: aran
CC: aran, epriestley, bmaurer
Differential Revision: 1032
Summary:
Clarified the instructions when editing a repository for the remote uri to
mention that a local path for the remote uri must be specified as
file:///local/path/to/repo instead of /local/path/to/repo. (The latter used to
work, but stopped functioning for new repositories as of D888.)
Test Plan:
loaded /repository/edit/NN/tracking (where NN is a repo number), and saw the
updated instruction message.
Reviewers: jungejason, epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: 1005
Summary:
This makes symbol cross-references work in Differential. You need to do a little
legwork but I'll document that once the change has baked for a little while.
Basically:
- Projects are annotated with indexed languages, and "shared library" projects
(for example, symbols in Phabricator should be searched for in Arcanist and
libphutil).
- When we render a changeset, we check if its language is an indexed one. If
it is, we invoke the decorator Javascript.
- The Javascript takes you to a lookup page, which either gives you a list of
matching symbols (if several match) or redirects you instantly to the
definition.
Test Plan: Clicked class and function symbols in a diff, got jumped into
sensible sorts of places in Diffusion.
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: 980
Summary: See T507. Since you can't do "xxxxxxxx^" where "xxxxxxxx" is the first
commit in a repository, fall back to diffing against the empty tree if we fail
to diff against the parent commit.
Test Plan: Looked at the first commit in libphutil on my local.
Reviewers: edward, jungejason, nh, tuomaspelkonen, aran
Reviewed By: nh
CC: aran, edward, epriestley, nh
Differential Revision: 953
Summary:
We need to issue all commands as $repository->junk() so we can pick up
credentials. Some of this stuff predates that change landing.
(I removed the "https" vs "svn+ssh" fallback code since it's specific to
Facebook, affected a tiny number of commits, is basically an SVN bug with UTF-8
handling and HTTP support, and doesn't make sense in the general case. The user
has the tools they need to force it via "reparse.php" if it's really an issue.)
Test Plan: Created new authenticated-remote mercurial and git repositories and
pulled/discovered them with credentials.
Reviewers: Makinde, jungejason, nh, tuomaspelkonen, aran
Reviewed By: Makinde
CC: aran, Makinde
Differential Revision: 970
Summary: Change import script plus almost all the view stuff. Still some rough
edges but this seems to mostly work. Blame is currently unsupported but I think
everything else works properly.
Test Plan:
Imported the hg repository itself. It doesn't immediately seem completely
broken. Here are some screens:
https://secure.phabricator.com/file/view/PHID-FILE-1438b71cc7c4a2eb4569/https://secure.phabricator.com/file/view/PHID-FILE-3cec4f72f39e7de2d041/https://secure.phabricator.com/file/view/PHID-FILE-2ea4883f160e8e5098f9/https://secure.phabricator.com/file/view/PHID-FILE-35f751a36ebf65399ade/
All the parsers were able to churn through it without errors.
Ran the new "reparse.php" script in various one-commit and repository modes.
Browsed/imported some git repos for good measure.
NOTE: The hg repository is only 15,000 commits and around 1,000 files.
Performance is okay but hg doesn't provide performant, native APIs to get some
data efficiently so we have to do some dumb stuff. If some of these interfaces
are cripplingly slow or whatever, let me know and we can start bundling some
Mercurial extensions with Arcanist.
Reviewers: Makinde, jungejason, nh, tuomaspelkonen, aran
Reviewed By: Makinde
CC: aran, Makinde, epriestley
Differential Revision: 960
Summary:
When we discover a new commit and it has a known local commit or tree hash, mark
it committed.
This supports Mercurial and Git-Immutable workflows, and improves
hybrid-Git-Mutable workflows and covers some cases where poeple just make
mistakes or whatever.
Test Plan: Parsed Mercurial, Git and SVN commits.
Reviewers: Makinde
Reviewed By: Makinde
CC: aran, Makinde
Differential Revision: 963
Summary: See T502. Under some VCS setups, we get full email addresses instead of
usernames or real names. Try harder to find matches, by falling back to email
address parsing if we don't get hits on the straight-up token parsing.
Test Plan:
This is difficult to test because it depends on the account state and repository
state, and hard to pull out so it's more testable without better mocking
facilities. I just dumped this into the parser to verify the behavior:
foreach (array(
'epriestley',
'Evan Priestley',
'epriestley@epriestley.com',
'derp <epriestley@epriestley.com>',
'"Evan Priestley" <derpderpderp@derpderpderp.com>',
'quackderp <derpderpderp@derpderpderp.com>',
) as $email) {
echo "{$email} = ".$this->resolveUserPHID($email)."\n";
}
die();
Running PhabricatorRepositoryGitCommitMessageParserWorker...
epriestley = PHID-USER-79f25616ea2635089a31
Evan Priestley = PHID-USER-79f25616ea2635089a31
epriestley@epriestley.com = PHID-USER-1bec59b91be6223f07fd
derp <epriestley@epriestley.com> = PHID-USER-1bec59b91be6223f07fd
"Evan Priestley" <derpderpderp@derpderpderp.com> =
PHID-USER-79f25616ea2635089a31
quackderp <derpderpderp@derpderpderp.com> =
This is expected (all variations of my identity parsed correctly, and the bogus
one failed). There are two different user PHIDs in the result set because I have
like 30 different similar accounts on my local, including one called "derp" and
another one with address "derp@derp.com", which prevented an earlier version of
this test case from working correctly.
Reviewers: zachallia, aran, Makinde, jungejason, nh, tuomaspelkonen
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: 968
Summary:
We currently rely on "remote_hooks_enabled" in .arcconfig to determine whether
commands like "arc amend" and "arc merge" should imply "arc mark-committed".
However, this is a historical artifact that is now bad for a bunch of reasons:
- The option name is confusing, it really means 'repository is tracked'.
- The option is hard to discover and generally sucks.
- We can empirically determine the right answer since we now know if a project
is in a tracked repository.
Add a call which arcanist can make on these workflows to figure out if it is
interacting with a project in a tracked repository or not.
Also added an "isTracked()" convenience method to reduce the number of magic
strings all over the place.
Test Plan: Ran "arcanist.projectinfo" for nonexistent, untracked and tracked
projects.
Reviewers: Makinde, jungejason, nh, tuomaspelkonen, aran
Reviewed By: Makinde
CC: aran, epriestley, Makinde
Differential Revision: 945
Summary:
See D943, this is the second parse stage. This will mark Differential revisions
as "Committed" among other things.
Almost all the logic here is shared between VCSes so the implementation itself
is straightforward.
Test Plan: Parsed all messages for the official Mercurial repository.
Reviewers: Makinde, jungejason, nh, tuomaspelkonen, aran
Reviewed By: Makinde
CC: aran, Makinde
Differential Revision: 944
Summary:
Repository import has three major steps:
- Commit discovery (serial)
- Message parsing (parallel, mostly VCS independent)
- Change parsing (parallel, highly VCS dependent)
This implements commit discovery for Mercurial, similar to git's parsing:
- List the heads of all the branches.
- If we haven't already discovered them, follow them back to their roots (or
the first commit we have discovered).
- Import all the newly discovered commits, oldest first.
This is a little complicated but it ensures we discover commits in depth order,
so the discovery process is robust against interruption/failure. If we just
inserted commits as we went, we might read the tip, insert it, and then crash.
When we ran again, we'd think we had already discovered commits older than HEAD.
This also allows later stages to rely on being able to find Phabricator commit
IDs which correspond to parent commits.
NOTE: This importer is fairly slow because "hg" has a large startup time
(compare "hg --version" to "git --version" and "svn --version"; on my machine,
hg has 60ms of overhead for any command) and we need to run many commands (see
the whole "hg id" mess). You can expect something like 10,000 per hour, which
means you may need to run overnight to discover a large repository (IIRC, the
svn/git discovery processes are both about an order of magnitude faster). We
could improve this with batching, but I want to keep it as simple as possible
for now.
Test Plan: Discovered all the commits in the main Mercurial repository,
http://selenic.com/repo/hg.
Reviewers: Makinde, jungejason, nh, tuomaspelkonen, aran
Reviewed By: Makinde
CC: aran, Makinde
Differential Revision: 943
Summary: See T262. This creates the index on the Differential side which we need in order to execute this query efficiently on the Diffusion side.
Also renames "DiffusionGitPathIDQuery" to "DiffusionPathIDQuery", this query object has nothing to do with git.
Test Plan: Attached top-level and sub-level diffs to revisions and verified they populated the table with sensible data.
Reviewers: bmaurer, aravindn, fmoo, jungejason, nh, tuomaspelkonen, aran
CC:
Differential Revision: 931
Summary: No actual parsing/import yet, but now you can define and pull Mercurial
repositories. I merged most of the local pull code so we can share it between
hg/git.
Test Plan:
- Created a new Mercurial repository to track Codeigniter off Bitbucket
- Edited / saved / etc.
- Launched the mercurial pull daemon, it pulled the repo. Killed and
relaunched, it updated the repo.
- Launched the git fetch deamon, it still works correctly.
Reviewers: Makinde, aran, jungejason, tuomaspelkonen
Reviewed By: Makinde
CC: aran, Makinde
Differential Revision: 793
Summary: See T315 for an extensive description of this feature. Adds the
descibed storage table.
Test Plan: Used phpsh to read/write symbol objects.
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: tuomaspelkonen
CC: aran, epriestley, tuomaspelkonen
Differential Revision: 897
Summary: See D902. As @abdul notes, a password input is probably more
appropraite here.
Test Plan: Mashed stuff into it, got bullets instead of text.
Reviewers: abdul, jungejason, nh, tuomaspelkonen, aran
Reviewed By: nh
CC: aran, nh
Differential Revision: 913
- Removed irrelevant csprintf(..)
- Updated code to use $repository->getRemoteURI()
- Updated code to use getRemoteCommandFuture(..) in Diffusion code
- Updated code to use $repository->getRemoteURI()
Summary: I still need to go through all the daemon and Diffusion code and change
the bare execx() calls to $repository->execxXXX() to actually make this work,
but we're getting close.
Test Plan: Configured repositories with various HTTP / SVN setups and ran the
test_connection.php script to verify keys were located and added and
username/password information was supplied.
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: nh
CC: aran, nh, jungejason
Differential Revision: 902
Summary:
Move toward storing credentials in configuration so it's easier to get the
daemons working. This should eventually solve all the key juggling junk you have
to do right now.
This only gets us part of the way to actually using these credentials in the
daemons since I have to go swap everything for $repository->execBlah().
I tried to write a web "Test Connection" button but it was too much of a mess to
get git to work since git doesn't give you access to its SSH command and SSH has
a bunch of interactive prompts which you can't really do anything about without
it or a bunch of ~/.ssh/config editing. This is what Git recommends:
https://git.wiki.kernel.org/index.php/GitFaq#How_do_I_specify_what_ssh_key_git_should_use.3F
..but it's not a great match for this use case.
Test Plan:
- Only partial.
- Ran "test_connection.php" on a Git repo with and without SSH, and with and
without valid credentials. This part works properly.
- Ran "test_connection.php" on a public SVN repo, but I don't have private or
WEBDAV repos set up at the moment.
- Mercurial doesn't work yet.
- Daemons haven't been converted yet.
Reviewers: jungejason, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, abdul, nmalcolm, epriestley, jungejason
Differential Revision: 888
references
Summary:
See T325. We tentatively support doing partial subdirectory parses in
Phabricator for Subversion, so you can elect to import only "trunk/local/" or
similar. We do this by importing only some of the commits (those commits which
affected that directory).
In Subversion, you can also "svn cp
svn+ssh://example.com/svnroot/trunk/foreign/example.c@13 local.c". This means
that commits which reference "trunk/local/" may themselves reference foreign
commits.
Currently, we break in this case and can't find the commit reference. Instead,
generate a foreign commit stub so we can at least point at some reasonable
object.
Test Plan: Successfully imported trunk/a/ of the test repo in T325 without
errors. Verified commit 3 in that repo is imported as a foreign stub.
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, jungejason, epriestley
Differential Revision: 892
repositories
Summary:
This query isn't scoped correctly to the repository ID, so we may identify
commits from other repositories.
This causes a somewhat subtle issue since we only use it to manage file
copies/moves, so you end up with a file "copied from" the same revision in
another repository. I think the UI probably even renders correctly.
Once I finish T325 and better understand what's going on here, I'll see how much
work is involved in writing an SQL patch to fix this.
Test Plan: Parsed the test repo from T325 with the expected error.
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: 891
Summary: If a user partially discovers a repository and then deletes it, the
timeline will have events from the old repository which this daemon won't be
able to parse.
Test Plan: @ajtrichards, can you apply this locally and restart your daemons
(##phd stop##, then relaunch them) and let me know if it fixes the issue?
Reviewers: ajtrichards, jungejason, tuomaspelkonen, aran
Reviewed By: ajtrichards
CC: aran, epriestley, ajtrichards
Differential Revision: 845
Summary:
See T372. Always render commit messages on one display line, so the table
doesn't jump around as they AJAX in on browse views.
The goal here is to have the cell choose a size naturally and for its content to
render with "overflow: hidden" if the natural size isn't large enough to contain
the content. "white-space: pre" or "white-space: nowrap" would prevent wrapping
but potentially make the table exceed the display width when a better behavior
is to hide some of the commit message.
Also use utf8-aware shortening, now that we have a function for it.
Casting a wide net in case anyone has a better way to do the CSS here. It's kind
of nasty that we have to use so many DOM nodes.
Test Plan:
- Resized window while viewing browse and history views in Safari, Chrome and
Firefox. Table exhibited described behavior.
- Verified summaries render sensibly and are properly truncated to 100
characters.
Reviewed By: aran
Reviewers: aran, jungejason, tuomaspelkonen, tomo, mroch, cpojer
CC: aran, epriestley
Differential Revision: 750
interface
Summary:
See T58. When I originally wrote this interface you couldn't make a form that
looked like a form but wasn't really a form, so I made it a real form. That
meant you could hit "return" in the text input and submit the form, which didn't
do anything but is vaguely silly.
After D422 there's a layout-only form element, so switch to that.
Test Plan: Loaded the tab, hit return in the textarea, it didn't do a form
submit.
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, jungejason, epriestley
Differential Revision: 719
Summary:
See T325. While this is a touch hacky it ends up being fairly clean, and we can
now do initial imports much more quickly and this actually cleaned up some of
the code. I also made the repository edit interface a little less foreboding.
@tuomaspelkonen, did you get anywhere with that bug you were chasing down a
couple days ago? We can hold this if it throws a wrench into stuff you're
working on.
Test Plan:
- Imported a subdirectory of a midsized SVN project (jQuery UI).
- Commit discovery for ~3500/4500 commits took just a few seconds.
- Commit discovery correctly ignored commits which didn't affect this
directory.
- Commit discovery correctly stopped at commit 13.
- Browse interface shows an incomplete listing, but that's fine, and
everything is otherwise functionally correct. We can add a note or something
later ("this is a view of commits affecting a subdirectory, some paths aren't
available"), but this behavior probably won't be too startling to users.
- Edited Git and SVN repositories to test form logic.
Reviewed By: jungejason
Reviewers: tuomaspelkonen, jungejason, aran, Girish
Commenters: tuomaspelkonen
CC: jcleveley, aran, jungejason, tuomaspelkonen
Differential Revision: 696
Summary:
Make it prettier, paginate, add user pictures, show document types, clean some
stuff up a little. Plenty of room for improvement but this should make it a lot
more useful.
Test Plan:
Here's what the new one looks like:
https://secure.phabricator.com/file/view/PHID-FILE-edce2b83c2e3a121c2b7/
Reviewed By: jungejason
Reviewers: tomo, jungejason, aran, tuomaspelkonen, mroch
Commenters: tomo
CC: aran, tomo, jungejason, epriestley
Differential Revision: 545
Summary:
create the indexer for commit
Test Plan:
run the reindex_one_commit.php against one existing commit
and it is returned in search result on the webpage; run parse_one_commit
against another commit; modified reindex_everything.php to let it only
parse one commit after loading all commits.
Reviewed By: epriestley
Reviewers: epriestley, aran
CC: aran, jungejason, epriestley, debow
Differential Revision: 490
Summary:
Everything breaks if this isn't true, and it's easy to get subtly wrong right
now. There are other more magical ways we could do this (automatically add a "/"
in this form or at runtime) but I think making it explicit is the easiest and
most robust approach. See T67.
Test Plan:
Tried to save a URI without a trailing slash.
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, jungejason
Differential Revision: 305
Summary:
Someone has "defaced" secure.phabricator.com with a helpful suggestion that I
actually do this; fair enough. :P
Test Plan:
Logged in as myself, unable to edit directory information. Logged out, logged in
as admin, was able to edit directory information.
I need to fix some more CSS stuff since some of these tabs render out hideous in
the admin background, but I can followup with that.
Reviewed By: tuomaspelkonen
Reviewers: aran, jungejason, tuomaspelkonen
Commenters: aran
CC: aran, tuomaspelkonen, epriestley
Differential Revision: 296
Summary:
I never actually wrote this controller.
Test Plan:
Deleted a repository via web UI.
Reviewed By: tuomaspelkonen
Reviewers: tuomaspelkonen, jungejason, aran
Commenters: aran
CC: aran, tuomaspelkonen, epriestley
Differential Revision: 231
Summary:
there are several places we open an 'r' connection but use it
for writing. Fix them.
Test Plan:
ran parse_one_commit.php against one revision which executes
the code with problem. It used to throw exception. Now it works fine.
Reviewed By: Girish
Reviewers: tuomaspelkonen, Girish
Commenters: aran
CC: aran, Girish
Differential Revision: 213
Summary:
I pretty shortsightedly made sending a side effect of save() in the case that a
server is configured for immediate sending. Move this out, make it explicit, and
get rid of all the tangles surrounding it.
The web tool now ignores the server setting and only repsects the checkbox,
which makes far more sense.
Test Plan:
Sent mails from Maniphest, Differential, and the web console. Also ran all the
unit tests. Verified headers from Maniphest.
Reviewed By: rm
Reviewers: aran, rm
CC: tuomaspelkonen, rm, jungejason, aran
Differential Revision: 200
Summary:
See T129, some older git doesn't have %B and we can reasonably fake it with %s
and %b.
Test Plan:
Reparsed all of the Phabricator repository with this worker, commit messages
look fine.
Reviewed By: rm
Reviewers: rm, aran, jungejason, tuomaspelkonen
CC: aran, rm
Differential Revision: 209
Summary:
the Repository tool is missing the standard application link
at the top. The reason is that PhabricatorRepositoryListController and
several other classes are inheriting from a wrong class.
Test Plan:
play with the application to make sure it is not breaking
other stuff.
Reviewed By: epriestley
Reviewers: epriestley
CC: jungejason, epriestley
Differential Revision: 70
Summary: Basic scaffolding for repository tracking, plus daemon infrastructure
(Timelines, Cursors) and some fixes (memory usage, mysql_connect() junk).
Test Plan: parsed Javelin git commit history via daemon
Reviewers:
CC:
