Summary:
Fixes T13284. See that task for substantial discussion. There are currently two cases where we'll skip over commits which we should publish:
- if a branch is not permanent, then later made permanent; or
- in some cases, the first time we examine branches in a repository.
In both cases, this error is one-shot and things work correctly going forward. The root cause is conflation between the states "this ref currently permanent" and "this ref was permanent the last time we updated refs".
Separate these pieces of state and cover all these cases. Also introduce a "--rebuild" flag to fix the state of bad commits.
Test Plan:
See T13284 for the three major cases:
- initial import;
- push changes to a nonpermanent branch, update, then make it permanent;
- push chanegs to a nonpermanent branch, update, push more changes, then make it permanent.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13284
Differential Revision: https://secure.phabricator.com/D20829
Summary:
Ref T13410. We currently generate some less-than-ideal anchors in remarkup, but it's hard to change the algorithm without breaking stuff.
To mitigate this, allow `#xyz` to match any target on the page which begins with `xyz`. This means we can make anchors longer with no damage, and savvy users are free to shorten anchors to produce more presentation-friendly links.
Test Plan: Browsed to `#header-th`, was scrolled to `#header-three`, etc.
Maniphest Tasks: T13410
Differential Revision: https://secure.phabricator.com/D20820
Summary: Ref T13279. Fix some tabular stuff, draw areas better, make the "compose()" API more consistent, unfatal the demo chart, unfatal the project burndown, make the project chart do something roughly physical.
Test Plan: Looked at charts, saw fewer obvious horrors.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20817
Summary: Ref T13279. We currently draw a point on the chart for each datapoint, but this leads to many overlapping circles. Instead, aggregate the raw points into display points ("events") at the end.
Test Plan: Viewed a stacked area chart with many points, saw a more palatable number of drawn dots.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20814
Summary:
Ref T13413. In Chrome 77, workboard cards with titles that must break in the middle of words cause the browser to completely lock up.
Work around the major known instance of this by overriding the "break-word" behavior. This gives us worse rendering for tasks with very long "words" in their titles (they are truncated instead of broken) but fixes the freezing.
Once Chrome is fixed, this can be reverted.
Test Plan:
- Created a task named "MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM" on a workboard.
- Loaded the board in Chrome 77.
- Before: entire page locks up.
- After: smooth sailing, except the "MMMMMM..." is truncated.
Maniphest Tasks: T13413
Differential Revision: https://secure.phabricator.com/D20812
Summary:
Fixes T7961. Currently, we present Herald users with actions like "Require legalpad signatures" and "Run build plans" even if Legalpad and Harbormaster are not installed.
Instead, allow fields and actions to be made "unavailable", which means that we won't present them as options when adding to new or existing rules.
If you edit a rule which already uses one of these fields or actions, it isn't affected.
Test Plan:
- Created a rule with a legalpad action, uninstalled legalpad, edited the rule. Action remained untouched.
- Created a new rule, wasn't offered the legalpad action.
- Reinstalled the application, saw the action again.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T7961
Differential Revision: https://secure.phabricator.com/D20808
Summary: Ref T13411. When users click a link to explain a capability (like the policy header on many objects, or the link next to specific capabilities in "Applications", "Diffusion", etc), inline the full ruleset for the custom policy into the dialog if the object has a custom policy.
Test Plan: {F6856365}
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20805
Summary:
Fixes T13408. Currently, when a package (or other object) appears in a field (rather than an action), it is not indexed.
Instead: index fields too, not just actions.
Test Plan:
- Wrote a rule like "[ Affected packages include ] ...".
- Updated the search index.
- Saw rule appear on "Affected By Herald Rules" on the package detail page.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13408
Differential Revision: https://secure.phabricator.com/D20795
Summary:
Depends on D20732. Ref T13366. This generally makes the "Merchant" UI look and work like the "Payment Account" UI.
This is mostly simpler since the permissions have largely been sorted out already and there's less going on here and less weirdness around view/edit policies.
Test Plan: Browsed all Merchant functions as a merchant member and non-member.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20733
Summary:
Depends on D20720. Ref T13366.
- Use modern policies and policy interfaces.
- Use new merchant authority cache.
- Add (some) transactions.
- Move MFA from pre-upgrade-gate to post-one-shot-check.
- Simplify the autopay workflow.
- Use the "reloading arrows" icon for subscriptions more consistently.
Test Plan: As a merchant-authority and account-authority, viewed, edited, and changed autopay for subscriptions.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20721
Summary:
Depends on D20718. Ref T13366. Ref T13367.
- Phortune payment methods currently do not use transactions; update them.
- Give them a proper view page with a transaction log.
- Add an "Add Payment Method" button which always works.
- Show which subscriptions a payment method is associated with.
- Get rid of the "Active" status indicator since we now treat "disabled" as "removed", to align with user expectation/intent.
- Swap out of some of the super weird div-form-button UI into the new "big, clickable" UI for choice dialogs among a small number of options on a single dimension.
Test Plan:
- As a mechant-authority and account-authority, created payment methods from carts, subscriptions, and accounts. Edited and viewed payment methods.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13367, T13366
Differential Revision: https://secure.phabricator.com/D20719
Summary:
Depends on D20713. Ref T13366. When a payment account establishes a relationship with a merchant by creating a cart or subscription, create an edge to give the merchant access to view the payment account.
Also, migrate all existing subscriptions and carts to write these edges.
This aims at straightening out Phortune permissions, which are currently a bit wonky on a couple of dimensions. See T13366 for detailed discussion.
Test Plan:
- Created and edited carts/subscriptions, saw edges write.
- Ran migrations, saw edges write.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20715
Summary: Depends on D20697. Ref T8389. Add support for adding "billing@enterprise.com" and similar to Phortune accounts.
Test Plan: Added and edited email addresses for a payment account.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T8389
Differential Revision: https://secure.phabricator.com/D20713
Summary:
Fixes T8830. Fixes T13364.
- The inability to destroy objects from the web UI is intentional. Make this clear in the messaging, which is somewhat out of date and partly reflects an earlier era when things could be destroyed.
- `bin/remove destroy` can't rewind time. Document expectations around the "put the cat back in the bag" use case.
Test Plan: Read documentation, clicked through both workflows.
Maniphest Tasks: T13364, T8830
Differential Revision: https://secure.phabricator.com/D20694
Summary:
Fixes T13363. Currently, these are genuine links which we intercept events for.
Make them pseudolinks instead. Possible alternative approaches are:
- Keep them as genuine links, but mark them as non-navigation links for Quicksand. (But: yuck, weird special case.)
- Keep them as genuine links, and have the dialog handler `JX.Stratcom.pass()` to see if anything handles the event. (But: the "pass()" pattern generally feels bad.)
"Tableaus" or whatever comes out of T10469 some day will probably break everything anyway?
Test Plan:
- Opened the "Edit Related Tasks... > Edit Subtasks" dialog.
- Clicked task title links (not the "open in new window" icon, and not the "Select" button).
- Before: Dialog (sometimes) closed abruptly.
- After: Task is consistently selected as part of the attachment set.
Maniphest Tasks: T13363
Differential Revision: https://secure.phabricator.com/D20693
Summary:
Ref T4900. When a card is edited, we currently emit an update notification for all the projects the task is tagged with. This isn't quite the right set:
- We want to emit notifications for projects the task //was previously// tagged with, so it can be removed from boards it should no longer be part of.
- We want to emit notifications for ancestors of projects the task is or was tagged with, so parent project boards can be updated.
- However, we don't need to emit notifications for projects that don't actually have workboards.
Adjust the notification set to align better to these rules.
Test Plan:
- Removal of Parent Project: Edited a task on board "A > B", removing the "B" project tag. Saw board A update in another window.
- Normal Update: Edited a task title on board X, saw board X update in another window.
- Used `bin/aphlict debug` to inspect the notification set, saw generally sensible-seeming data going over the wire.
Reviewers: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20680
Summary:
See D20650. Long ago, this got added as "pastebin", but that's the name of another product/company, not a generic term for paste storage.
Rename the database to `phabricator_paste`.
(An alternate version of this patch would rename `phabricator_search` to `phabricator_bing`, `phabricator_countdown` to `phabricator_spacex`, `phabricator_pholio` to `phabricator_adobe_photoshop`, etc.)
Test Plan:
- Grepped for `pastebin`, now only found references in old patches.
- Applied patches.
- Browsed around Paste in the UI without encountering issues.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20661
Summary:
Depends on D20654. Ref T4900. When a task is edited, emit a "workboards" event for all boards it appears on (in a future change, this should also include all boards it //previously// appeared on, and all parents of both sets of boards -- but I'm just getting things working for now).
When we receive a "workboards" event, check if the visible board should be updated.
Aphlict has a complicated intra-window leader/follower election system which could let us process this update event exactly once no matter how many windows a user has open with the same workboard. I'm not trying to do any of this since it seems fairly rare. It makes sense for events like "you have new notifications" where we don't want to generate 100 Ajax calls if the user has 100 windows open, but very few users seem likely to have 100 copies of the same workboard open.
Test Plan:
- Ran `bin/aphlict debug`.
- Opened workboard A in two windows, X and Y.
- Edited and moved tasks in window X.
- Saw "workboards" messages in the Aphlict log.
- Saw window Y update in nearly-real-time (locally, this is fast enough that it feels instantaneous).
Then:
- Stopped the Aphlcit server.
- Edited a task.
- Started the Aphlict server.
- Saw window Y update after a few moments (i.e., update in response to a reconnect).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20656
Summary:
Depends on D20653. Ref T4900. Pass ordering details to the reload endpoint so it can give the client accurate ordering/header information in the response.
The removed comment mentions this, but here's why this is a difficult mess:
- In window A, view a board with "Group by: Owner" and no tasks owned by "Alice". Since "Alice" owns no tasks, this means the columns do not have an "Assigned to: Alice" header!
- In window B, edit task T and assign it to Alice.
- In window A, press "R".
Window A now not only needs to update to properly reflect the state of task T, it actually needs to draw a new "Assigned to: Alice" header in every column.
Fortunately, the "group by" code anticipates this being a big mess, is fairly careful about handling it, and the client can handle this state change and the actual code change here isn't too involved. This is just causing a lot of not-very-obvious indirect effects in the pipeline to handle these situations that need complex redraws.
Test Plan:
- After making various normal edits/creates/moves in window A, pressed "R" in window B. Saw ordering reflected correctly after sync.
- Went through the whole "Group by: Owner" + assign to unrepresented owner flow above. After pressing "R", saw "Assigned to: Alice" appear on the board.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20654
Summary:
Depends on D20652. Ref T4900. When the user presses "R", send a list of cards currently visible on the client and their version numbers.
On the server:
- Compare the client verisons to the server versions so we can skip updates for objects which have not changed. (For now, the client version is always "1" and the server version is always "2", so this doesn't do anything meaningful, and every card is always updated.)
- Compare the client visible set to the server visible set and "remove" any cards which have been removed from the board.
I believe this means that "R" always puts the board into the right state (except for some issues with client orderings not being fully handled yet). It's not tremendously efficient, but we can make versioning better (using the largest object transaction ID) to improve that and loading the page in the first place doesn't take all that long so even sending down the full visible set shouldn't be a huge problem.
Test Plan:
- In window A, removed a card from a board.
- In window B, pressed "R" and saw the removal reflected on the client.
- (Also added cards, edited cards, etc., and didn't catch anything exploding.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20653
Summary:
Depends on D20639. Ref T4900. Currently, "BoardResponseEngine" has a `setObjectPHID()` method. This is called after edit operations to mean "we just edited object X, so we know it needs to be updated".
Move toward `setUpdatePHIDs(...)` in all cases, with `setUpdatePHIDs(array(the-object-we-just-edited))` as a special case of that. After this change, callers pass:
- An optional list of PHIDs they know need to be updated on the client. Today, this is always be a card we just edited (on edit/move flows), or a sort of made-up list of PHIDs for the moment (when you press "R"). In the future, the "R" endpoint will do a better job of figuring out a more realistic update set.
- An optional list of PHIDs currently visible on the client. This is used to update ordering details and mark cards for removal. This is currently passed by edit/move, but not by pressing "R" (it will be in the future).
- An optional list of objects. The "R" workflow has to load these anyway, so we can save a couple queries by letting callers pass them. For now, the edit/move flows still rely on the engine to figure out what it needs to load.
This does very little to actually change client behavior, it mostly just paves the way for the next update to the "R" workflow to make it handle add/remove cases properly.
Test Plan:
- Edited and moved cards on a workboard.
- Pressed "R" to reload a workboard.
Neither of these operations seem any worse off than they were before. They still don't fully work:
- When you edit a card and delete the current workboard project from it, it remains visible. This is also the behavior on `master`. This is sort of intentional since we don't necessarily want to make these cards suddenly disappear? Ideally, we would probably have some kind of "tombstone" state where the card can still be edited but can't be dragged, and the next explicit user interaction would clean up old tombstones. This interaction is very rare and I don't think it's particularly important to specialize.
- When a card is removed from the board, "R" can't currently figure out that it should be removed from the client. This is because the client does not yet pass a "visiblePHIDs" state. It will in an upcoming change.
- The "R" flow always sends a full set of card updates, and can not yet detect that some cards have not changed.
- There's a TODO, but some ordering stuff isn't handled yet.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20652
Summary:
Depends on D20638. Ref T4900. This is an incremental step toward proper workboard updates.
Currently, the client can mostly update its view because we do updates when you edit or move a card, and the client and server know how to send lists of card updates, so a lot of the work is already done.
However, the code assumes we're only updating/redrawing one card at a time. Make the client accept and process multiple card updates.
In future changes, I'll add versioning (so we only update cards that have actually changed), fix the "TODO" around ordering, and move toward actual Aphlict-based real-time updates.
Test Plan:
- Opened the same workboard in two windows.
- Edited cards in one window, pressed "R" (capital letter, with no modifier keys) to reload the second window.
- Saw edits and moves reflected accurately after sync, except for some special cases of header/order interaction (see "TODO").
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20639
Summary:
Ref T13302. The "Close/Cancel" button is currently running two copies of the "dismiss dialog" code, since it's techncally a link with a valid HREF attribute.
An alternate formulation of this is perhaps `if (JX.Stratcom.pass()) { return; }` ("let other handlers react to this event; if something kills it, stop processing"), but `pass()` is inherently someone spooky/fragile so try to get away without it.
Test Plan: Opened the Javascript console, clicked "Edit Task" on a workboard, clicked "Close" on the dialog. Before: event was double-handled leading to a JS error in the console. After: dialog closes uneventfully.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13302
Differential Revision: https://secure.phabricator.com/D20640
Summary: Depends on D20637. Ref T4900. This is some ancient dead code that nothing uses.
Test Plan: Grepped for `updateCard()` to verify it's private. Searched for "options" and "dirtyColumn" and got no hits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20638
Summary:
Ref T13302. In at least some browsers (including Safari and Chrome), when you write this:
```
<a href="#">...</a>
```
...and then access `<that node>.href`, you get `http://local-domain-whatever.com/path/to/current/page#` back.
This is wonderful, but not what we want. Access the raw attribute value instead, which is `#` in all browsers.
Test Plan:
- In Safari, Chrome, and Firefox:
- Clicked "Edit Subtasks" from a task.
- Clicked "Select" buttons to select several tasks.
- Before: Clicking these button incorrectly closed the dialog (because of D20573).
- After: Clicking these buttons now selects tasks without closing the dialog.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13302
Differential Revision: https://secure.phabricator.com/D20590
Summary:
Ref T13302. Currently, if you enable Quicksand (by clicking "Persistent Chat"), open a dialog with links in it (like "Create Subtask" with multiple available subtypes), and then follow a navigation link, the page content reloads behind the dialog but the dialog stays in the foreground.
Fix this by closing dialogs when users click navigation links inside them.
Test Plan:
With Quicksand enabled and disabled, clicked a subtask type in the "Create Subtask" dialog.
- Before, Quicksand Disabled: Dialog stays on screen, then navigation occurs.
- After, Quicksand Disabled: Dialog vanishes, then navigation occurs.
- Before, Quicksand Enabled: Dialog stays on screen, navigation occurs behind it.
- After, Quicksand Enabled: Dialog vanishes, then navigation occurs.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13302
Differential Revision: https://secure.phabricator.com/D20573
Summary:
Ref T13305. See that task for discussion.
This old migration may indirectly cause search index worker tasks to queue by loading handles. They'll fail since we later added `dateCreated` to the worker task table.
Use `needHandles(false)` (since we don't use them) to disable loading handles and avoid the problem.
Test Plan:
- Ran `bin/storage upgrade -f` on an older instance (late 2016) and hit this issue.
- Applied the patch, got a clean migration to modernity.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13305
Differential Revision: https://secure.phabricator.com/D20570
Summary:
Ref PHI1275. Previously, see T591. See also T7963. Headers are currently very visually similar to one another, and similar to the text size:
{F6485441}
I think the design intent was to make it hard to make bad-looking documents, but all the headers end up being very samey.
Differentiate the sizes of the headers better so they're much more obvious (e.g., when scrolling through a document) and the different levels are more distinct.
This might be a little overboard, but we can always pull it back a bit if it's too much, and I think giving users more control in Remarkup (in cases where it doesn't create some weird syntax/parsing nightmare) is generally a good thing.
Test Plan: {F6485447}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20569
Summary: Ref T11741. See PHI1276. After the switch to "Ferret", this table has no remaining readers or writers.
Test Plan:
- Ran `bin/storage upgrade -f`, no warnings.
- Grepped for class name, table name, `stemmedCorpus` column; got no relevant hits.
- Did a fulltext search.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11741
Differential Revision: https://secure.phabricator.com/D20549
Summary: Ref T13279. Makes charts incrementally more useful by allowing the server to provide labels and colors for functions.
Test Plan: {F6438872}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20501
Summary:
Ref T13279. Adds client-side support for rendering function labels on charts, then labels every function as important data.
Works okay on mobile, although I'm not planning to target mobile terribly heavily for v0.
Test Plan: {F6438860}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20500
Summary:
Ref T13279. This adds support for:
- Datasets can have types, like "stacked area".
- Datasets can have multiple functions.
- Charts can store dataset types and datasets with multiple functions.
- Adds a "stacked area" dataset.
- Makes D3 actually draw a stacked area chart.
Lots of rough edges here still, but the result looks slightly more like it's supposed to look.
D3 can do some of this logic itself, like adding up the area stacks on top of one another with `d3.stack()`. I'm doing it in PHP instead because I think it's a bit easier to debug, and it gives us more options for things like caching or "export to CSV" or "export to API" or rendering a data table under the chart or whatever.
Test Plan: {F6427780}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20498
Summary:
Ref T13279. Old D3 seems perfectly fine, but most of the good references seem to have been written by people who update D3 more than once every 10 years (???).
This requires some minor API changes, see next diff.
Test Plan: See next diff.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20497
Summary: Depends on D20486. Ref T13279. Now that the "Reports" UI uses a panel to draw a real chart from Facts, throw away the copy of the old code.
Test Plan: `grep`
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20487
Summary:
Depends on D20475. Ref T13272. Currently, if you `JX.Request` with `data` like `{x: null}`, we submit that as `?x=null`, i.e. as though `null` was the string `"null"`.
This is weird and almost certainly never intended/desiarable. In particular, it causes a bug where panels embedded inside tab panels are incorrectly draggable.
It's possible this breaks something which relied on the buggy behavior, but that seems unlikely.
Test Plan: Tried to drag a panel inside a tab panel, it really truly didn't work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20476
Summary:
This hasn't been updated in a bit more than a year (last updated in D18594) and we've accumulated a fair number of SQL patches. Update it.
This is mostly automatic (with `bin/storage quickstart`), except:
- Manual edit to one migration for a missed callsite to `DashboardInstall`.
- Replaced two InnoDB tables that still have FULLTEXT indexes with MyISAM (see rP6cedd4a95cfc).
This is not really possible to review and more for reference than examination. `bin/storage quickstart` has historically worked correctly.
Test Plan: I have great faith that `bin/storage quickstart` is a script which creates a big `.sql` file.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20480
Summary:
Ref T13279. Charting changes alter how the "line-chart" behavior works, but the "Burnup Chart" still relies on the old behavior.
Although I'm intending to remove "Maniphest > Reports" once Facts is a minimally sufficient replacement, copy this behavior to keep it working until we're ready to pull the trigger.
Also fix a leftover typo from D20435.
Test Plan: Viewed a legacy Maniphest burnup rate report.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20449
Summary:
Depends on D20439. Ref T13279. Some day, charts will probably need to reload themselves or do a bunch of defer/request-shaping magic when they're on a dashboard with 900 other charts.
Give the controller separate "HTML placeholder" and "actual data" modes, and make the placeholder fetch the data in a separate request.
Then, make the chart redraw if you resize the window instead of staying at whatever size it started as.
Test Plan:
- Loaded a chart, saw it load data asynchronously.
- Resized the window, saw the chart resize.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20440
Summary:
Ref T13279. I think I'm going to fling some stuff at the wall for a bit here and hope most of it sticks, so this series of changes may not be terribly cohesive or focused. Here:
The range of the chart is locked to "[0, 105% of max]". This is trying to make a pleasing extra margin above the maximum value, but currently just breaks charts with negative values. Later:
- I'll probably let users customize this.
- We should likely select 0 as the automatic minimum for charts with no negative values.
- For charts with positive values, it would be nice to automatically pick a pleasantly round number (25, 100, 1000) as a maximum by default.
We don't have any storage for charts yet. Add some. This works like queries, where every possible configuration gets a short URL slug. Nothing writes or reads this yet.
Rename `fn()` to `css_function()`. This builds CSS functions for D3. The JS is likely to get substantial structural rewrites later on, `fn()` was just particularly offensive.
Test Plan: Viewed a fact series with negative values. Ran `bin/storage upgrade`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20438
Summary:
Depends on D20416. Ref T13269. See D20329.
If you try to save an "Assign to" rule with no assignee, we currently replace the control with an "InvalidRule" control that isn't editable. We'd prefer to give you an empty field back and let you pick a different value.
Differentiate between "bad record format" (i.e., we can't really do anything with this) and "bad record value" (i.e., everything is structurally fine, you just typed the wrong thing). In the latter case, we still build a properly typed rule for the UI, we just refuse to update storage until you fix the problem.
Test Plan:
First, hit the original issue and got a nicer UI with a more consistent control width (note full-width error):
{F6374205}
Then, applied the rest of the patch and got a normal "fix the issue" form state instead of a dead-end:
{F6374211}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20417
Summary:
Ref T13269. See D20329. When we switch trigger rule control types, reset the rule value.
Also, pick slightly nicer defaults for status/priority.
Test Plan:
- Created a "Change Status To: X" rule.
- Saved it.
- Edited it.
- Selected "Assign to" for the existing action's dropdown.
- Before: tokenizer filled with nonsense.
- After: tokenizer cleared.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20416
Summary:
Depends on D20414. Ref T13272. Several minor things here:
- Currently, you can drag panels underneath the invisible "there are no items in this column" div and the "Create Panel / Add Existing Panel" buttons. This is silly; stop it.
- Currently, when viewing a tab panel on a dashboard, you can drag the panels inside it. This is extremely silly. Make "movable" off by default and pass it through the async flow only when we actually need it.
- Make the whole "Add Tab..." virtual tab clickable to open the dropdown. This removes the rare exception/todo combo I added earlier. {key F}
- Add or remove some icons or something.
Test Plan: Moved panels around on dashboards. Tried to drag panels inside tab panels. Added tab. Things were less obviously broken.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20415
Summary:
Depends on D20412. See PHI1147.
- Index the targets of "Add Reviewer", "Add Blocking Reviewer", "Add Auditor", "Add Subscriber", and "Remove Subscriber" Herald rules. My major goal is to get Owners packages. This will also hit projects/users, but we just don't read those edges (for now, at least).
- Add a "Related Herald Rules" panel to Owners Package pages.
- Add a migration to reindex Herald rules for the recent build plan stuff and this, now that such a migration is easy to write.
Test Plan:
Ran migration, verified all rules reindexed.
{F6372695}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20413
Summary:
Depends on D20411. Ref T13272. Dashboards and panels have new indexes (Ferret and usage edges) that need a rebuild.
For large datasets like commits we have the "activity" flow in T11932, but realistically these rebuilds won't take more than a few minutes on any realistic install so we should be able to just queue them up as migrations.
Let migrations insert a job to basically run `bin/search index --type SomeObjectType`, then do that for dashboards and panels.
(I'll do Herald rules in a followup too, but I want to tweak one indexing thing there.)
Test Plan: Ran the migration, ran `bin/phd debug task`, saw everything get indexed with no manual intervention.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20412
Summary:
Ref T7667. On the road to locking the auth config, also clean up some minor UI issues:
* Only show the warning about not Phacility instance auth if the user isn't a manager (see next diff).
* When rendering more than one warning in the guidance, add bullets.
* I didn't like the text in the `auth.config-lock` config setting.
Test Plan: Loaded the page, saw more reasonable-looking guidance: {F6369405}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7667
Differential Revision: https://secure.phabricator.com/D20400
Summary:
Depends on D20410. Ref T13272. Dashboards/Panels currently use older "ngram" indexing, which is a less-powerful precursor to Ferret. Throw away the ngram index and provide a Ferret index instead. Also:
- Remove the NUX state, which links to the wrong place now and doesn't seem terribly important.
- Add project tags to the search result list.
- Make the "No Tags" tag a little less conspicious.
Test Plan:
- Indexed dashboards and panels.
- Searched for dashboards and panels via SearchEngine using Ferret "query" field.
- Searched for panels via "Add Existing Panel" datasource typeahead.
- Searched for dashboards via "Add Menu Item > Dashboard" on a ProfileMenu via typeahead.
- Viewed dashboard NUX state (no special state, but no more bad link to "/create/").
- Viewed dashboard list, saw project tags.
- Viewed dashboards with no project tags ("No Tags" is now displayed but less visible).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20411
Summary: Depends on D20409. Ref T13272. Before "ProfileMenu", dashboards were installed on specific objects using this table. Installs are now handled via ProfileMenu and this table no longer has any meaningful readers. Remove references to the table and destroy it.
Test Plan: Grepped for `DashboardInstall`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20410
Summary: Depends on D20408. Ref T13272. The actual JS is still a little bit iffy, but this makes the server side "move" operation work correctly by updating it to use the same code as everything else.
Test Plan: Moved panels around on single-column and multi-column dashboards, saw them move to reasonable places and stay there when I reloaded the page.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20409
Summary:
Depends on D20407. Ref T13272. This updates the "add panel" (which has two flavors: "add existing" and "create new") and "remove panel" flows to work with the new duplicate-friendly storage format.
- We now modify panels by "panelKey", not by panel PHID, so one dashboard may have multiple copies of the same panel and we can still figure out what's going on.
- We now work with "contextPHID", not "dashboardID", to make some flows with tab panels (or other nested panels in the future) easier.
The only major remaining flow is the Javascript "move panels around with drag-and-drop" flow.
Test Plan:
- Added panels to a dashboard with "Create New Panel".
- Added panels to a dashboard with "Add Existing Panel".
- Removed panels from a dashboard.
- Added and removed duplicate panels, got a correctly-functioning dashboard that didn't care about duplicates.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20408
Summary:
Ref T13272. See PHI945. Currently, dashboards tend to break when they have duplicate panels. Partly, this is because all the edit operations operate on a "panelPHID", so there's no way to say "remove the copy of panel X at the bottom of the right-hand column", since the operation is `remove(phid)` and that doesn't point at a specific copy of that panel.
In theory, the code is supposed to prevent duplicate panels, but (a) it doesn't always do this successfully and (b) there's no real reason you can't put duplicate panels on a dashboard if you want. There may even be good reason to do this if you have a "random cat picture" panel or something. Even if you aren't doing this on purpose, it's probably better to let you do it and then fix your mistake by removing the panel you don't want than to prevent the operation entirely.
To simplify this whole mess, I want to just support putting the same panel into multiple places on a dashboard. As a first step, change the storage format so each instance of a panel has a unique "panelKey".
Since each instance of each panel now has its own object, this will also let us give particular instances of panels things like "automatic refresh time" (T5514) or "custom name for this panel on this dashboard" later, if we want. Not clear these are valuable but having this capability can't hurt.
Test Plan:
- `var_dump()`'d the migration, looked at all the results.
- Ran the migration.
NOTE: This breaks dashboards on its own since none of the other code has been changed yet, see followups.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20405
Summary:
Depends on D20398. Ref T13272. Fixes T6018. Previously, panels showed "used on dashboards: x, y", but this did not include cases where a panel was used by another container panel (today, a tab panel).
Do edge indexing when a dashboard or panel is saved, then pull the edges on the Panel page so we can provide a full list of uses.
Test Plan: {F6369289}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272, T6018
Differential Revision: https://secure.phabricator.com/D20399
Summary:
Depends on D20397. Ref T13272. Similar to the recent "where are Herald rules used" stuff, show which menus Dashboards are installed in.
This is mostly straightforward, except that I pulled some of the Herald logic into a parent class so it could be shared.
Test Plan: {F6369164}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20398
Summary:
Depends on D20396. Ref T13272. Currently, using the dropdowns to edit a tab panel from a dashboard redirects you to the tab panel page.
Instead, redirect back to the context page (usually, a dashboard -- but theoretically a containing tab panel, since you can put tab panels inside tab panels).
Also, fix some JS issues with non-integer panel keys. I've moved panel keys from "0, 1, 2, ..." to having arbitrary keys to make some operations less flimsy/error-prone, but this needs some JS tweaks.
Test Plan: Edited a tab panel from a dashboard, got sent sensibly back to the dashboard.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20397
Summary:
Ref T13272. In edit mode, tab panels now have a dropdown menu. However, this sort of overrlaps with the actual action of clicking the tab to select it.
Separate these into different click targets so that "select tab X" and "open dropdown menu for X" are different operations.
This is more work than it appears because:
- We have an "action icon" already, used when you put a dashboard on a portal/home to create an "Edit" link. It makes sense to attach dropdowns to this, but it has some hard-coded stuff.
- In applications with a "Create <thing>" in the crumbs (like Maniphest), we may use a dropdown menu if there are multiple create forms available. However, this menu renders in a weird way by reading all the properties out of an actual "View" object and building something else.
- The "list of tabs" stuff shares code with different "list of tabs" navigation used by Diffusion and Instances.
..but I think I fixed everything and didn't break anything.
Test Plan:
- Clicked "select tab" and "open dropdown menu" as separate actions.
- Viewed Diffusion, Maniphest with multiple create forms, Instances.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20396
Summary:
Ref T13275. Add portals to the search index so that:
- they show up in fulltext global search; and
- the typeahead actually uses an index.
Also make them taggable with projects as an organizational aid.
Test Plan: Indexed portals with `bin/serach index`, searched for a portal with "Query", with fulltext search in main menu, with typehead on "Install Dashboard...", changed the name of a portal and searched again to check that the index updates properly.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20389
Summary:
Ref T13263.
- Make the user profile section of the "Profile" dropdown menu have a transparent background, not a white background. This is a pre-existing issue. This is normally hard to see, but visible on Workboards with custom background colors.
- Fix an alignment issue with the little "V" caret in the search scope dropdown. This is a recent issue caused by some tab-caret CSS I added recently for tabbed dashboard panels.
Test Plan:
Before:
{F6367723}
After:
{F6367724}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13263
Differential Revision: https://secure.phabricator.com/D20388
Summary:
Depends on D20383. Ref T13272. Fixes T12363. See PHI997. This gets the edit flows for tab panels functional again. They aren't //nice//, and a lot of the workflows are fairly janky: for example, most of them end up with you on the tab panel's page, which isn't useful if you started on a dashboard page.
However, these flows were extremely janky before anyway (see T12363) and I suspect this is a net improvement even though it's a bit of a mess. I anticipate cleaning this up bit-by-bit in future diffs.
Test Plan: {F6366372}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272, T12363
Differential Revision: https://secure.phabricator.com/D20384
Summary:
Depends on D20382. Ref T13272. When something near the edge of the screen has a dropdown menu, we currently may render the menu offscreen.
Instead, keep the menu onscreen.
(This is happening because I'm adding dropdown menus to tab query panels.)
Test Plan:
Before:
{F6363339}
After:
{F6363340}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20383
Summary:
Depends on D20372. Ref T13272.
- There's a very heavy dropshadow on panels right now that looks out of place. Reduce it a bit.
- Panels currently have unlabeled pencil and trash icons. Turn this into a menu. I'm likely planning to add options like "Change Query..." to this menu to make managing some types of panels easier.
Test Plan: {F6332838}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20373
Summary:
Depends on D20362. Ref T13272. Currently, Dashboards have an "Install Dashboard" flow which is pretty janky and only allows you to install things to the home page.
Instead, allow users to install things to any valid target (home, favorites, portals, projects). This also provides URIs like `dashboard/install/1/home/personal/` which allow you to link users to an "install a dashboard" page; this may or may not get used.
Test Plan: Installed dashboards on home, favorites, projects, and portals.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20364
Summary:
See <https://discourse.phabricator-community.org/t/non-functional-actions-menu-on-live-phame-views/2593>. Several layers here:
The "Actions" button is broken because a menu behavior is failing, since we aren't rendering the menu.
When a behavior fails to initialize, catch and log the exception and continue. Previously, we stopped initializing behaviors if any failed, but behaviors are usually independent and continuing with an explicit exception seems reasonable.
Give "JX.log()" some "sprintf()" semantics to make logging the behavior failure easier. We can probably afford these extra 200 bytes now in 2019.
This fixes the button and gives us explicit errors in the log. So far, so good.
Then, when a page won't render chrome, don't try to render the main menu. This fixes the actual errors (we no longer try to initialize menu behaviors for nodes which don't exist).
Completely hide the "Actions" and "Comment" flows if the viewer isn't logged in. Although this isn't completely consistent with other applications, I think it's more appropriate for Phame. In applications like Maniphest, we show a full set of controls (but disable them) so that users who are not currently logged in have a clear path to interact with the content, under the assumption that this is a relatively common workflow. This is probably less common for Phame, where we expect most anonymous viewers not to log in or interact.
Finally, parametrize a one-off border color and add a border under the crumbs at the top of the page.
Test Plan:
- Viewed a "Live" Phame blog post page, clicked "Actions", got a dropdown.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20378
Summary:
Depends on D20353. Ref T13275. This is just some small quality-of-life fixes:
- When you add items to menus, they currently go below the "Edit Menu/Manage Menu" links by default. This isn't a very good place for them. Instead, lock "edit" items to the bottom of the menu.
- Lock profile pictures to the top of the menu. This just simplifies things a little.
- Show more iconography hints on the "edit menu items" UI.
- Add a "drag stuff to do things" hint if some stuff can be dragged.
Test Plan:
- Added new items to a Portal, they didn't go to the very bottom. Instead, they went above the "Edit/Manage" links; a sensible place for them.
- Viewed the "edit menu items" screen, saw more hints and visual richness.
- Viewed/edited Home, Projects, Portals, Favorites
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20355
Summary:
Ref T13275. Today, you can build a custom page on the home page, on project pages, and in your favorites menu.
PHI374 would approximately like to build a completely standalone custom page, and this generally seems like a reasonable capability which we should support, and which should be easy to support if the "custom menu" stuff is built right.
In the near future, I'm planning to shore up some of the outstanding issues with profile menus and then build charts (which will have a big dashboard/panel component), so adding Portals now should let me double up on a lot of the testing and maybe make some of it a bit easier.
Test Plan:
Viewed the list of portals, created a new portal. Everything is currently a pure skeleton with no unique behavior.
Here's a glorious portal page:
{F6321846}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20348
Summary:
See PHI1185, which reports a performance issue with "(" in remarkup in certain contexts.
I can't reproduce the performance issue, but I can reproduce the autosuggester incorrectly remaining active and swallowing return characters.
When the user types `(` or `[`, we wait for a prefix for the `((` (Phurl) or `[[` (Phriction) rules. We currently continue looking for that prefix until a character is entered that explicitly interrupts the search.
For example, typing `(xxx<return>` does not insert a return character, because we're stuck on matching the prefix.
Instead, as soon as the user has entered text that we know won't ever match the prefix, deactivate the autocomplete. We can slightly cheat through this by just looking for at least one character of text, since all prefixes are exactly one character long. If we eventually have some kind of `~~@(xyz)` rule we might need to add a more complicated piece of rejection logic.
Test Plan: Typed `(xxx<return>`, got a return. Used `((` and `[[` autosuggest rules normally. Used `JX.log()` to sanity check that nothing too crazy seems to be happening.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20365
Summary: Depends on D20345. Use a narrower layout for very large graphs to save some space.
Test Plan:
Before:
{F6320215}
After:
{F6320216}
This does not affect smaller graphs.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20346
Summary:
See downstream <https://phabricator.wikimedia.org/T171648>. The `T123 Task Name` column in graphs can currently fold down to 0 pixels wide.
Although it's visually nice to render this element without a scroll bar when we don't really need one, the current behavior is excessive and not very useful.
Instead, tweak the CSS so:
- This cell is always at least 320px wide.
- After 320px, we'll overflow/ellipsis the cell on small screens.
This generally gives us better behavior:
- Small screens get a scrollbar to see a reasonable amount of content.
- The UI doesn't turn into a total mess if one task has a whole novel of text.
Test Plan:
Old behavior, note that there's no scrollbar and the cell is so narrow it is useless:
{F6320208}
New behavior, same default view, has a scrollbar:
{F6320209}
Scrolling over gives you this:
{F6320210}
On a wider screen (this wide or better), we don't need to scroll:
{F6320211}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20345
Summary:
Fixes T13273. This element is a bit weird, but I think I fixed it without breaking anything.
The CSS is used by project hovercards and user hovercards, but they each have a class which builds mostly-shared-but-not-really-identical CSS, instead of having a single `View` class with modes. So I'm not 100% sure I didn't break something obscure, but I couldn't find anything this breaks.
The major issue is that all the text content has "position: absolute". Instead, make the image "absolute" and the text actual positioned content. Then fix all the margins/padding/spacing/layout and add overflow. Seems to work?
Plus: hide availability for disabled users, for consistency with D20342.
Test Plan:
Before:
{F6320155}
After:
{F6320156}
I think this is pixel-exact except for the overflow behavior.
Also:
- Viewed some other user hovercards, including a disabled user. They all looked unchanged.
- Viewed some project hovercards. They all looked good, too.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13273
Differential Revision: https://secure.phabricator.com/D20344
Summary:
See downstream <https://phabricator.wikimedia.org/T201480>. Searching for things on mobile is a significant challenge because clicking the "Magnifying Glass" icon shows and then immediately hides the menu. I believe some aspect of iOS event handling has changed since this was originally written.
At some point, I'd like to rewrite this to work more cleanly and get rid of `jx-toggle-class`. In particular, it isn't smart enough to know that it should be modal with other menus, so you can get states like this by clicking multiple things:
{F6320110}
This would also probably just look and work better if it was an inline element that showed up under the header instead of a floating dropdown element.
However, I'm having a hard time getting the Safari debugger to actually connect to the iOS simulator, so take a small step toward this bright future and fix the immediate problem for now: toggle on click instead of mousedown/touchstart.
This means the menu opens ~100ms later, but actually works. Big improvement!
I'd like to move away from "jx-toggle-class" anyway (it usually isn't sophisticated enough to fully describe a behavior) so reducing complexity here seems good. It isn't used in //too// many places so this is unlikely to have any negative effects, I hope.
Test Plan: On iOS simulator, clicked the magnifying glass icon in the main menu to get a search input. Before: got a search input for a microsecond. After: actually got a search input.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20343
Summary: Ref T13269. Make it visually more clear that the "Trigger" and "New Task / Edit / Bulk" dropdown menu items are buttons, not status icons or indicators of some kind.
Test Plan: {F6313872}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20332
Summary: Ref T13269. I refactored this late in the game to organize things better and add table cells around stuff, and accidentally broke the relationship between the "Rule Type" selector and the value selector.
Test Plan: Switched rule type selector from "Change Status" to "Play Sound", saw secondary control update properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20326
Summary:
Depends on D20321. Fixes T12175. Ref T13074. Now that before/after PHIDs are suggestions, we can give the server a more complete view of what the client is trying to do so we're more likely to get a good outcome if the client view is out of date.
Instead of passing only the one directly adjacent card PHID, pass all the card PHIDs that the client thinks are in the same group.
(For gigantic columns with tens of thousands of tasks this might need some tweaking -- like, slice both lists down to 10 items -- but we can cross that bridge when we come to it.)
Test Plan:
- Dragged some cards around to top/bottom/middle positions, saw good positioning in all cases.
- In two windows, dragged stuff around on the same board. At least at first glance, conflicting simultaneous edits seemed to do reasonable things.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074, T12175
Differential Revision: https://secure.phabricator.com/D20322
Summary:
Depends on D20320. Ref T12175. Ref T13074. Currently, when you move a card between columns, the internal transaction takes exactly one `afterPHID` or `beforePHID` and moves the card before or after the specified card.
This is a fairly strict interpretation and causes a number of practical issues, mostly because the user/client view of the board may be out of date and the card they're dragging before or after may no longer exist: another user might have moved or hidden it between the last client update and the current time.
In T13074, we also run into a more subtle issue where a card that incorrectly appears in multiple columns fatals when dropped before or after itself.
In all cases, a better behavior is just to complete the move and accept that the position may not end up exactly like the user specified. We could prompt the user instead:
> You tried to drop this card after card X, but that card has moved since you last loaded the board. Reload the board and try again.
...but this is pretty hostile and probably rarely/never what the user wants.
Instead, accept a list of before/after PHIDs and just try them until we find one that works, or accept a default position if none work. In essentially all cases, this means that the move "just works" like users expect it to instead of fataling in a confusing/disruptive/undesirable (but "technically correct") way.
(A followup will make the client JS send more beforePHIDs/afterPHIDs so this works more often.)
We could eventually add a "strict" mode in the API or something if there's some bot/API use case for precise behavior here, but I suspect none exist today or are (ever?) likely to exist in the future.
Test Plan:
- (T13074) Inserted two conflicting rows to put a card on two columns on the same board. Dropped one version of it underneath the other version. Before: confusing fatal. After: cards merge sensibly into one consistent card.
- (T12175) Opened two views of a board. Moved card A to a different column on the first view. On the second view, dropped card B under card A (still showing in the old column). Before: confusing fatal. After: card ended up in the right column in approximately the right place, very reasonably.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074, T12175
Differential Revision: https://secure.phabricator.com/D20321
Summary:
Depends on D20308. Ref T5474. The element which previews what will happen when you drop a task somewhere can cover the bottom part of the rightmost column on a workboard.
To fix this, I'm trying to just fade it out if you put your cursor over it. I tried to do this in a simple way previously (":hover" + "opacity: 0.25") but it doesn't actually work because "pointer-events: none" stops ":hover" from working.
Instead, do this in Javascript. This is a little more complicated but: it works; and we can do the fade when you get //near// the element instead of actually over it, which feels a little better.
Test Plan:
- Shrank window to fairly small size so that the preview could cover up stuff on the workboard.
- Dragged a card toward the rightmost column.
- Before: drop action preview covered some workboard stuff.
- After: preview faded out as my cursor approached.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20320
Summary:
In some cases, we show a limited number of one type of object somewhere else, like "Recent Such-And-Such" or "Herald Rules Which Use This" or whatever.
We don't do a very good job of communicating that these are partial lists, or how to see all the results. Usually there's a button in the upper right, which is fine, but this could be better.
Add an explicit "more stuff" button that shows up where a pager would appear and makes it clear that (a) the list is partial; and (b) you can click the button to see everything.
Test Plan: {F6302793}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20315
Summary:
Ref T5474. In 99% of cases, a separate "archived/active" status for triggers probably doesn't make much sense: there's not much reason to ever disable/archive a trigger explcitly, and the archival rule is really just "is this trigger used by anything?".
(The one reason I can think of to disable a trigger manually is because you want to put something in a column and skip trigger rules, but you can already do this from the task detail page anyway, and disabling the trigger globally is a bad way to accomplish this if it's in use by other columns.)
Instead of adding a separate "status", just track how many columns a trigger is used by and consider it "inactive" if it is not used by any active columns.
Test Plan: This is slightly hard to test exhaustively since you can't share a trigger across multiple columns right now, but: rebuild indexes, poked around the trigger list and trigger details, added/removed triggers.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20308
Summary:
Ref T5474. Allow columns to play a sound when tasks are dropped.
This is a little tricky because Safari has changed somewhat recently to require some gymnastics to play sounds when the user didn't explicitly click something. Preloading the sound on the first mouse interaction, then playing and immediately pausing it seems to work, though.
Test Plan: Added a trigger with 5 sounds. In Safari, Chrome, and Firefox, dropped a card into the column. In all browsers, heard a nice sequence of 5 sounds played one after the other.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20306
Summary:
Ref T13074. If you hit a prompt on a drop operation (today: MFA; in the future, maybe "add a comment" or "assign this task"), we currently leave the board in a bad semi-frozen state if you cancel the workflow by pressing "Cancel" on the dialog.
Instead, put things back the way they were.
Test Plan: Dragged an MFA-required card, cancelled the MFA prompt, got a functional board instead of a semi-frozen board I needed to reload.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20305
Summary:
Ref T5474. The first rough cut of triggers showed some of the trigger rules in a tooltip when you hover over the "add/remove" trigger menu.
This isn't great since we don't have much room and it's a bit finnicky / hard to read.
Since we have a better way to show effects now in the drop preview, just use that instead. When you hover over the trigger menu, preview the trigger in the "drop effect" element, with a "Trigger: such-and-such" header.
Test Plan:
- This is pretty tough to screenshot.
- Hovered over menu, got a sensible preview of the trigger effects.
- Dragged a card over the menu, no preview.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20304
Summary:
Ref T5474. This provides a Herald-like UI for editing workboard trigger rules.
This probably has some missing pieces and doesn't actually save anything to the database yet, but the basics at least roughly work.
Test Plan: {F6299886}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20301
Summary:
Ref T10335. When you (for example) drag a "Resolved" task into a column with "Trigger: change status to resolved.", don't show a hint that the action will "Change status to resolved." since this isn't helpful and is somewhat confusing.
For now, the only visibility operator is "!=" since all current actions are simple field comparisons, but some actions in the future (like "add subscriber" or "remove project") might need other conditions.
Test Plan:
Dragged cards in ways that previously provided useless hints: move from column A to column B on a "Group by Priority" board; drag a resolved task to a "Trigger: change status to as resolved" column. Saw a more accurate preview in both cases.
Drags which actually cause effects still show the effects correctly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335
Differential Revision: https://secure.phabricator.com/D20300
Summary:
Ref T10335. Ref T5474. When you drag-and-drop a card on a workboard, show a UI hint which lists all the things that the operation will do.
This shows: column moves; changes because of dragging a card to a different header; and changes which will be caused by triggers.
Not implemented here:
- Actions are currently shown even if they have no effect. For example, if you drag a "Normal" task to a different column, it says "Change priority to Normal.". I plan to hide actions which have no effect, but figuring this out is a little bit tricky.
- I'd like to make "trigger effects" vs "non-trigger effects" a little more clear in the future, probably.
Test Plan:
Dragged stuff between columns and headers, and into columns with triggers. Got appropriate preview text hints previewing what the action would do in the UI.
(This is tricky to take a screenshot of since it only shows up while the mouse cursor is down.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335, T5474
Differential Revision: https://secure.phabricator.com/D20299
Summary:
Depends on D20278. Ref T5474. This change creates some new empty objects that do nothing, and some new views for looking at those objects. There's no actual useful behavior yet.
The "Edit" controller is custom instead of being driven by "EditEngine" because I expect it to be a Herald-style "add new rules" UI, and EditEngine isn't a clean match for those today (although maybe I'll try to move it over).
The general idea here is:
- Triggers are "real" objects with a real PHID.
- Each trigger has a name and a collection of rules, like "Change status to: X" or "Play sound: Y".
- Each column may be bound to a trigger.
- Multiple columns may share the same trigger.
- Later UI refinements will make the cases around "copy trigger" vs "reference the same trigger" vs "create a new ad-hoc trigger" more clear.
- Triggers have their own edit policy.
- Triggers are always world-visible, like Herald rules.
Test Plan: Poked around, created some empty trigger objects, and nothing exploded. This doesn't actually do anything useful yet since triggers can't have any rule behavior and columns can't actually be bound to triggers.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20279
Summary: See downstream <https://phabricator.wikimedia.org/T166358>. The notifications menu is missing some CSS to color and style values in stories like "renamed task from X to Y".
Test Plan:
Before:
{F6302123}
After:
{F6302122}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20310
Summary:
Depends on D20277. Ref T10333.
- Put profile icons on "Group by Owner".
- Add a similar "Group by Author". Probably not terribly useful, but cheap to implement now.
- Add "Sort by Title". Very likely not terribly useful, but cheap to implement and sort of flexible?
Test Plan: {F6265396}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20278
Summary:
Depends on D20274. Ref T10578. This is en route to an ordering by points, it's just a simpler half-step on the way there.
Allow columns to be sorted by creation date, so the newest tasks rise to the top.
In this ordering you can never reposition cards, since editing a creation date by dragging makes no sense. This will be true of the "points" ordering too (although we could imagine doing something like prompting the user, some day).
Test Plan: Viewed boards by "natural" (allows reordering both when dragging within and between columns), "priority" (reorder only within columns), and "creation date" (reorder never). Dragged cards around between and within columns, got apparently sensible behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10578
Differential Revision: https://secure.phabricator.com/D20275
Summary:
Depends on D20273. Fixes T10722. Currently, we don't make it very clear when a card can't be edited. Long ago, some code made a weak attempt to do this (by hiding the "grip" on the card), but later UI changes hid the "grip" unconditionally so that mooted things.
Instead:
- Replace the edit pencil with a red lock.
- Provide cursor hints for grabbable / not grabbable.
- Don't let users pick up cards they can't edit.
Test Plan: On a workboard with a mixture of editable and not-editable cards, hovered over the different cards and was able to figure out which ones I could drag or not drag pretty easily. Picked up cards I could pick up, wasn't able to drag cards I can't edit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10722
Differential Revision: https://secure.phabricator.com/D20274
Summary:
Depends on D20271. Ref T10333. When a column is empty but a board is grouped (by priority, owner, etc) render the headers properly.
When a column has headers, don't apply the "empty" style even if it has no cards. This style just makes some empty space so you can drag-and-drop more easily, but headers do the same thing.
Test Plan: {F6264611}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20272
Summary:
Depends on D20267. Depends on D20268. Ref T10333. Currently, we support "Natural" and "Priority" orders, but a lot of the particulars are pretty hard-coded, including some logic in `ManiphestTask`.
Although it's not clear that we'll ever put other types of objects on workboards, it seems generally bad that you need to modify `ManiphestTask` to get a new ordering.
Pull the ordering logic out into a `ProjectColumnOrder` hierarchy instead, and let each ordering define the things it needs to work (name, icon, what headers look like, how different objects are sorted, and how to apply an edit when you drop an object under a header).
Then move the existing "Natural" and "Priority" orders into this new hierarchy.
This has a minor bug where using the "Edit" workflow to change a card's priority on a priority-ordered board doesn't fully refresh card/header order since the response isn't ordering-aware. I'll fix that in an upcoming change.
Test Plan: Grouped workboards by "Natural" and "Priority", dragged stuff around within and between columns, grepped for all touched symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20269
Summary:
Depends on D20266. Boards currently have several `whateverMap<cardPHID => stuff>` properties, but we can just move these all down into a `CardTemplate`, similar to the recently introduced `HeaderTemplate`.
The `CardTemplate` holds all the global information for a card, and then `Card` is specific for a particular copy in a column. Today, each `CardTemplate` has one `Card`, but a `CardTemplate` may have more than one card in the future (when we add subproject columns).
Test Plan: Viewed workboards in different sort orders and dragged stuff around, grepped for all affected symbols.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20267
Summary:
Depends on D20263. Ref T10333. I want to add groups like "Assignee" to workboards. This means you may have several tasks grouped under, say, "Alice".
When you drag the bottom-most task under "Alice" to the top, what does that mean?
Today, the only grouping is "Priority", and it means "change the task's secret/hidden global subpriority". However, this seems to generally be a somewhat-bad answer, and is quite complex. It also doesn't make much sense for an author grouping, since one task can't really be "more assigned" to Alice than another task.
Users likely intend this operation to mean "move it, visually, with no other effects" -- that is, user intent is to shuffle sticky notes around on a board, not edit anything substantive. The meaning is probably something like "this is similar to other nearby tasks" or "maybe this is a good place to start", which we can't really capture with any top-level attribute.
We could extend "subpriority" and give tasks a secret/hidden "sub-assignment strength" and so on, but this seems like a bad road to walk down. We'll also run into trouble later when subproject columns may appear on the board, and a user could want to put a task in different positions on different subprojects, conceivably.
In the "Natural" order view, we already have what is probably a generally better approach for this: a task display order particular to the column, that just remembers where you put the sticky notes.
Move away from "subpriority", and toward a world where we mostly keep sticky notes where you stuck them and move them around only when we have to. With no grouping, we still sort by "natural" order, as before. With priority grouping, we now sort by `<priority, natural>`. When you drag stuff around inside a priority group, we update the natural order.
This means that moving cards around on a "priority" board will also move them around on a "natural" board, at least somewhat. I think this is okay. If it's not intuitive, we could give every ordering its own separate "natural" view, so we remember where you stuck stuff on the "priority" board but that doesn't affect the "Natural" board. But I suspect we won't need to.
Test Plan:
- Viewed and dragged a natural board.
- Viewed and dragged a priority board.
- Dragged within and between groups of 0, 1, and multiple items.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20265
Summary:
Ref T13074. Today, in normal task list views in Maniphest (not workboards), you can (sometimes) reorder tasks if the view is priority-sorted.
I suspect no one ever does this, few users know it's supported, and that it was basically rendered obsolete the day we shipped workboards.
This also means that we need to maintain a global "subpriority" for tasks, which distinguishes between different tasks at the same priority level (e.g., "High") and maintains a consistent ordering on workboards.
As we move toward making workboards more flexible (e.g., group by author / owner / custom fields), I'd like to try moving away from "subpriority" and possibly removing it entirely, in favor of "natural order", which basically means "we kind of remember where you put the card and it works a bit like a sticky note".
Currently, the "natural order" and "subpriority" systems are sort of similar but also sort of in conflict, and the "subpriority" system can't really be extended while the "natural order / column position" system can.
The only real reason to have a global "subpriority" is to support the list-view drag-and-drop.
It's possible I'm wrong about this and a bunch of users love this feature, but we can re-evaluate if we get feedback in this vein.
(This just removes UI, the actual subpriority system is still intact and still used on workboards.)
Test Plan: Viewed task lists, was no longer able to drag stuff. Grepped for affected symbols. Dragged stuff in remaining grippable lists, like "Edit Forms" in EditEngine config.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20263
Summary:
These effects feel like they're possibly overkill, since other CSS rules make the selection reticle behave correctly and the implementation is relatively intuitive.
Or not, either way.
Test Plan: Selected text on either side of a 2-up diff, no more opacity effects.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20264
Summary:
Ref T10333. Ref T8135. Depends on D20247. Allow users to drag-and-drop cards on a priority-sorted workboard under headers, even if the header has no other cards.
As of D20247, headers show up but they aren't really interactive. Now, you can drag cards directly underneath a header (instead of only between other cards). For example, if a column has only one "Wishlist" task, you may drag it under the "High", "Normal", or "Low" priority headers to select a specific priority.
(Some of this code still feels a little rough, but I think it will generalize once other types of sorting are available.)
Test Plan: Dragged cards within and between priority groups, saw appropriate priority edits applied in every case I could come up with.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333, T8135
Differential Revision: https://secure.phabricator.com/D20248
Summary:
Ref T10333. When workboards are ordered (for example, by priority), add headers to the various groups. Major goals are:
- Allow users to drag-and-drop to set values that no cards currently have: for example, you can change a card priority to "normal" by dragging it under the "normal" header, even if no other cards in the column are currently "Normal".
- Make future orderings more useful, particularly "order by assignee". We don't really have room to put the username on every card and it would create a fair amount of clutter, but we can put usernames in these headers and then reference them with just the profile picture. This also allows you to assign to users who are not currently assigned anything in a given column.
- Make the drag-and-drop behavior more obvious by showing what it will do more clearly (see T8135).
- Make things a little easier to scan in general: because space on cards is limited, some information isn't conveyed very clearly (for example, priority information is currently conveyed //only// through color, which can be hard to pick out visually and is probably not functional for users who need vision accommodations).
- Maybe do "swimlanes": this is pretty much a "swimlanes" UI if we add whitespace at the bottom of each group so that the headers line up across all the columns (e.g., "Normal" is at the same y-axis position in every column as you scroll down the page). Not sold on this being useful, but it's just a UI adjustment if we do want to try it.
NOTE: This only makes these headers work for display.
They aren't yet recognized as targets by the drag list UI, so you can't drag cards into an empty group. I'll tackle that in a followup.
Test Plan: {F6257686}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20247
Summary:
Ref T10334. Partly, this just improves visual feedback for all drag operations. After D20242, we can have cases where you (for example) drag a low-priority node to a very tall column on a priority-ordered workboard. In this case, the actual dashed-border-drop-target may not be on screen.
We might make the column scroll or put some kind of hint in the UI in this case, but an easy starting point is just to make the "yes, you're targeting this column" state a bit more clear.
Test Plan: Dragged tasks between columns, saw the border higlight on the target columns. This is very tricky to take a screenshot of.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10334
Differential Revision: https://secure.phabricator.com/D20245
Summary:
Ref T10334. When a workboard is ordered by priority, dragging from column "A" to a particular place in column "B" currently means "move this task to column B, and adjust its priority so that it naturally sorts into the location under my mouse cursor".
Users frequently find this confusing / undesirable.
To begin improving this, make "drag from column A to column B" and "drag from somewhere in column A to somewhere else in column A" into different operations. The first operation, a movement between columns, no longer implies an ordering change. The second action still does.
So if you actually want to change the priority of a task, you drag it within its current column. If you just want to move it to a different column, you drag it between columns.
This creates some possible problems:
- Some users may love the current behavior and just not be very vocal about it. I doubt it, but presumably we'll hear from them if we break it.
- If you actualy want to move + reorder, it's a bit more cumbersome now. We could possibly add something like "shift + drag" for this if there's feedback.
- The new behavior is probably less surprising, but may not be much more obvious. Future changes (for example, in T10335) should help make it more clear.
- When you mouse cursor goes over column B, the card dashed-rectangle preview target thing jumps to the correct position in the column -- but that may not be under your mouse cursor. This feels pretty much fine if the whole column fits on screen. It may not be so great if the column does not fit on screen and the dashed-rectangle-thing has vanished. This is just a UI feedback issue and we could refine this later (scroll/highlight the column).
Test Plan:
- Created several tasks at different priority levels, sorted a board by priority, dragged tasks between columns. Dragging from "A" to "B" no longer causes a priority edit.
- Also, dragged within a column. This still performs priority edits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10334
Differential Revision: https://secure.phabricator.com/D20242
Summary:
Ref T13249. See PHI1115. I initially wanted to make `bin/policy unlock --owner <user> H123` work to transfer ownership of a Herald rule, although I'm no longer really sure this makes much sense.
In any case, this makes things a little better and more modern.
I removed the storage table for rule comments. Adding comments to Herald rules doesn't work and probably doesn't make much sense.
Test Plan: Created and edited Herald rules, grepped for all the transaction type constants.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20258
Summary:
Ref T13249.
- When a line has only increased in indent depth, don't red-fill highlight the left side of the diff. Since reading a diff //mostly// involves focusing on the right side, indent depth changes are generally visible enough without this extra hint. The extra hint can become distracting in cases where there is a large block of indent depth changes.
- Move the markers slightly to the left, to align them with the gutter.
- Make them slightly opaque so they're a little less prominent.
Test Plan: See screenshots.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20251
