Summary: Depends on D19652. Ref T13197. See PHI851. This migrates the actual `auditStatus` on Commits, and older status transactions.
Test Plan:
- Ran migrations.
- Spot-checked the database for sanity.
- Ran some different queries, got unchanged results from before migration.
- Reviewed historic audit state transactions, and accepted/raised concern on new audits. All state transactions appeared to generate properly.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19655
Summary: Depends on D19651. Ref T13197. The application now accepts either numeric or string values. However, for consistency and to reduce surprise in the future, migrate existing saved queries to use string values.
Test Plan: Saved some queries on `master` with numeric constants, ran the migration, saw string constants in the database and equivalent behavior in the UI.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19652
Summary:
Ref T13077. See PHI840. Ref T1894. I'm planning to just let you comment on Phriction documents. I think this will create a few problems (e.g., around popular documents which collect long comment threads that are eventually obsolete) but nothing should be too terribly critical (e.g., we handle it gracefully when objects have very large number of comments/transactions) and for most documents this is likely just a net improvement.
"Just enable comments" is probably not the final iteration on this, but I think it's probably a step forward on the balance, not a step sideways or a slippery slope down into a dark hole or anything.
Test Plan: {F5877316}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13077, T1894
Differential Revision: https://secure.phabricator.com/D19659
Summary: See PHI871. Ref T13197. These sections are only divided visually and don't have textual headers. Add aural headers.
Test Plan: {F5875471}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19654
Summary:
Depends on D19650. Ref T13197. Allow `SearchCheckboxesField` to have a "deprecated" map of older aliases, then convert them to modern values.
On the API method page, show all the values.
This technically resolves the issue in PHI841, although I still plan to migrate behind this.
Test Plan:
{F5875363}
- Queried audits, fiddled with `?status=1,audited`, etc.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19651
Summary: Ref T13197. We're almost ready to migrate: let the Query accept either older integer values or new string values. Then move some callsites to use strings.
Test Plan: Called `audit.query`, browsed audits, audited commits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19650
Summary: Ref T13195. See PHI851. Continuing down the path toward replacing these legacy numeric constants with more modern string constants.
Test Plan:
- Raised concern, requested verification, verified.
- Looked at commit hovercard with audit status.
- Viewed header on a commit page.
- (Didn't test the Doorkeeper stuff since it requires linking to Asana and seems unlikely to break.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19647
Summary:
Ref T13195. If a Phriction page begins with a code block, the `clear: both;` currently makes it clear the action list.
Instead, use table-cell layout on desktops.
Test Plan: Viewed a Phriction page with an initial code block on desktop/tablet/mobile/printable layouts. Now got more sensible layouts in all cases.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: GoogleLegacy
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19649
Summary:
Ref T13195. Fixes T8573. When you're adding inlines to your own stuff, mark them "Done" by default. You can unmark them as "Done" if you're legitimately leaving TODOs for yourself, although I think this is unusual.
(If this turns out to be less unusual than I think, we could consider an alternate rule: mark replies by the author as "Done" by default.)
Test Plan: Added some inlines as an author and a non-author. Saw my author inlines marked as "Done" by default. Submitted them; unmarked and submittted them.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195, T8573
Differential Revision: https://secure.phabricator.com/D19635
Summary:
Ref T13195. Ref T8573. This allows reviewers to mark their own inline comments as "Done" before they submit them.
If you're leaving a non-actionable comment like "this is good", you can pre-check "Done" to give the author a hint that you don't expect any response.
Test Plan: On revisions and commits, added inlines as the author and a reviewer/auditor. Marked them done/not-done before submitting. As author, marked the not-done ones done after submitting. Checked preivews, toggled done/not done states.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195, T8573
Differential Revision: https://secure.phabricator.com/D19634
Summary:
Ref T13195. See PHI861. The "+ Draft" flag is not currently exposed over the API, but seems stable enough to expose.
Also expose the "hold as draft" flag, normally `arc diff --draft`.
Today, you can get "+ Draft" with some other state by:
- abandoning a draft revision ("Abandoned + Draft"); or
- using `arc diff --plan-changes` with an older `arc` version ("Changes Planned + Draft").
Test Plan: Called `differential.revision.search` via Conduit and got sensible-looking results for revisions in various states.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19648
Summary:
Ref T13195. See PHI851. Add an object, analogous to the `DifferentialRevisionStatus` object, to handle audit status management.
This will primarily make it easier to swap storage over to strings later, but also cleans things up a bit.
Test Plan: Viewed audit/commit lists, saw sensible state icons. Ran `bin/audit synchronize`, got sensible output.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19646
Summary:
See PHI859. Ref T13195. The regexp for replacing variables currently does not include underscores.
Include underscores.
I also made a note in T13088: we should (almost certainly?) throw immediately if you try to pass a bogus variable name as a custom parameter, but this is a slightly larger change.
Test Plan:
- Made an "http request" build plan with `?x=${initiator.phid}&y={$some_variable}`.
- Added `some_variable` as a parameter to the parameter collection.
- Before patch: `initiator.phid` was replaced, but `some_variable` was not.
- After patch: both variables are replaced.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19645
Summary: See D19632. Agreed that this is more clear.
Test Plan: Read carefully.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19644
Summary:
Ref T13195. See PHI851. Audits currently have older integer status constants. We've moved almost all object types away from this to string constants (which are better in basically every way, and particularly way better for exposing over the API).
Commits/audits are currently accessible over the API and expose these constants via a "statuses" constraint.
Prepare to move toward modern string constants by defining a new, more modern map of status details and defining the existing methods in terms of it.
Test Plan: Browsed audits checking for icons/names/open-ness, saw no changes. This change should have no user-visible effects, as it just reorganizes code.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19642
Summary:
Ref T13195. Ref PHI851. Currently, checkbox constraints don't tell you what values are supported on the API page.
You can figure this out with "Inspect Element" or by viewing the source code, but just render a nice table instead.
Test Plan: {F5862969}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19641
Summary:
Ref T13195. See PHI851. Start by making some minor improvements here:
- Clarify that the example of what constraints look like is just an example.
- Add descriptions for parameters missing descriptions.
Test Plan: Looked at API method page, saw more helpful/complete instructions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19640
Summary:
Ref T13195. See PHI842. Alternative to D19638.
Instead of doing all the stuff in D19638, //just// remove the `rebuild_summaries.php` script. This script is outdated, copy/pastes the rebuild logic, and doesn't understand unreachable commits.
If we had some use for it it should move to `bin/repository rebuild-summary ...` or similar, but it's not clear there's any use for it. The incremental summary rebuilds seem to work fine as-is.
Test Plan: Grepped for callers or documentation referencing this script, found nothing.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19643
Summary: Ref T13195. See PHI845. For custom OperationTypes, provide access to the Interface and Operation via getters. This is just for convenience, since passing these around everywhere can be a bit of a pain if you have a deep-ish stack of things or love using callbacks or whatever.
Test Plan: Landed a revision via upstream Drydock operations.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19636
Summary:
Ref T13195. An install had a user apply a transaction which added about 1,000 inline comments. Rendering the email for this transaction took a very long time because the context section for each comment must be highlighted separately.
We can make the highlighting faster (in this case, by porting the lexer to PHP) but it's also sort of silly to include more than 100 inlines in an email. These emails are likely to be truncated by outbound size rules at some point anyway. Instead, limit inlines rendered directly into email to the first 100 per transaction group.
Test Plan:
Set limit to 2, added 4 comments, viewed text and HTML emails:
{F5859967}
{F5859968}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19632
Summary:
Ref T13195. Ref T8573. The inline comment controllers currently use outdated `$user = $this->getRequest()->getUser()` calls.
Instead, use `$viewer = $this->getViewer()`.
This is just a small consistency update with no behavioral changes.
Test Plan: Viewed and added inlines in Differential and Diffusion.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13195, T8573
Differential Revision: https://secure.phabricator.com/D19633
The unique key on <documentPHID, version> may fail to apply if any content
rows don't have a valid document. This is rare, but we have some old random
garbage rows on "secure.phabricator.com" which prevent the next patch from
applying. Just toss these rows, they're junk.
Summary: Ref T13077. This is currently a little too confusing to go out into the world, mostly because there's no way to edit documents without auto-publishing them. Keep it out of the spotlight for this release.
Test Plan: Viewed Phriction, saw publish operation marked as a prototype.
Reviewers: amckinley
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19627
Summary: Ref T13077. Updates the "History" view to be slightly better organized and draft-aware.
Test Plan: Viewed page history in Phriction.
Reviewers: amckinley
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19626
Summary:
Ref T13077. We need to know the maximum version of a document in several cases, so denormalize it onto the Document object.
Then clean up some behaviors where we edit a document with, e.g., 7 versions but version 5 is currently published. For now, we: edit starting with version 7, save as version 8, and immediately publish the new version.
Test Plan:
- Ran migration.
- Edited a draft page without hitting any weird version errors.
- Checked database for sensible `maxVersion` values.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19625
Summary:
See T13193. See T13077. If we drop a column which is part of a UNIQUE KEY, MariaDB raises an error.
This is probably a bad idea on our side anyway, but in this case it wasn't an obviously bad idea.
To get around this:
- Drop the unique key, if it exists, before dropping the column.
- Explicitly add the new unique key afterward.
Test Plan: Ran `bin/storage upgrade` locally without issue, but I'm on MySQL. Will follow up on T13193.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19624
Summary:
See PHI844. Ref T13189.
Add "Revision test plan" as an available field for Herald. This is a little niche -- and a little odd because it sticks around even if you fully disable test plans -- but probably broadly reasonable.
The existing "Revision summary" field counterintuitively included the test plan. Separate this out since it's now a separate field and the behavior was weird historic nonsense. I'll note this in the changelog.
Test Plan: Wrote a rule using both fields, verified they generated the expected values.
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19623
Summary: Depends on D19621. Ref T13077. Fixes T4815. This adds previous/current/next/draft buttons and makes navigation between unpublished and published versions of a document more clear.
Test Plan: {F5841997}
Reviewers: amckinley
Maniphest Tasks: T13077, T4815
Differential Revision: https://secure.phabricator.com/D19622
Summary:
Depends on D19620. Ref T13077. This adds a "Publish" operation which points the current version at some historical version of the document -- not necessarily the most recent version. Newer versions become "drafts".
This is still quite rough and missing a lot of hinting in the UI, I'm just making it work so I can start making the UI understand it.
Test Plan: Used the "Publish" action to publish older versions of a document, saw the document revert. Many UI hints are missing and this operation is puzzling and not yet usable for normal users.
Reviewers: amckinley
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19621
Summary: Depends on D19619. Ref T13065. Ref T13077. Migrate Phriction mail keys to the new infrastructure and drop the column.
Test Plan: Ran migrations, spot-checked the database.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13077, T13065
Differential Revision: https://secure.phabricator.com/D19620
Summary:
Ref T13077. This is mostly just a small cleanup change, even though the actual change is large.
We currently reference content and document objects from one another with `contentID` and `documentID`, but this means that `contentID` must be nullable. Switching to PHIDs allows the column to be non-nullable.
This also supports reorienting some current and future transactions around PHIDs, which is preferable for the API. In particular, I'm adding a "publish version X" transaction soon, and would rather callers pass a PHID than an ID or version number, since this will make the API more consistent and powerful.
Today, `contentID` gets used as a cheaty way to order documents by (content) edit time. Since PHIDs aren't orderable and stuff is going to become actually-revertible soon, replace this with an epoch timestamp.
Test Plan:
- Created, edited, moved, retitled, and deleted Phriction documents.
- Grepped for `documentID` and `contentID`.
- This probably breaks //something// but I'll be in this code for a bit and am likely to catch whatever breaks.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19619
Summary:
Ref T13077. We currently have these weird policy hints in Phriction that we don't use in other applications. Just remove them for consistency to make the eventual swap to EditEngine a little easier.
Also nuke some unreacahble code.
Test Plan: Loaded edit page, saw more standard UI.
Reviewers: amckinley
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19618
Summary:
Depends on D19616. Ref T13077. Fixes T8172. In the last round of design updates, a lot of actions got stuffed into "Actions" menus.
I never really got used to these and think they're a net usability loss, and broadly agree with the feedback in T8172. I'd generally like to move back toward a state where actions are available on the page, not hidden in a menu.
For now, just put a curtain view on these pages. This could be refined later (e.g., stick this menu to the right hand side of the screen) depending on where other Phriction changes go.
(Broadly, I'm also not satisfied with where we ended up on the fixed-width pages like Diffusion > Manage, Config, and Instances. In contrast, I //do// like where we ended up with Phortune in terms of overall design. I anticipate revisiting some of this stuff eventually.)
Test Plan:
- Looked at Phriction pages on desktop/tablet/mobile/printable -- actions are now available on the page.
- Looked at other DocumentView pages (like Phame blogs) -- no changes for now.
Reviewers: amckinley
Maniphest Tasks: T13077, T8172
Differential Revision: https://secure.phabricator.com/D19617
Summary: Ref T13077. There is no "PHUIDocumentView" so toss the "Pro" suffix from this classname.
Test Plan: Grepped for `PHUIDocumentView` and `PHUIDocumentViewPro`.
Reviewers: amckinley
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19616
Summary: Ref T13189. See PHI710. Ref T13088. Fixes T9951. Allow callers to `harbormaster.sendmessage` to specify that the test details are remarkup so they can use rich formatting and include links, files, etc.
Test Plan: {F5840098}
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13189, T13088, T9951
Differential Revision: https://secure.phabricator.com/D19615
Summary:
Fixes T12251. Ref T13189. See PHI610. The difficulty here is that we don't want to disclose Phabricator account information to Buildkite. We're comfortable disclosing information from `git`, etc.
- For commits, use the Identity to provide authorship information from Git.
- For revisions, use the local commit information on the Diff to provide the Git/Mercurial/etc author of the HEAD commit.
Test Plan:
- Built commits and revisions in Buildkite via Harbormaster.
- I can't actually figure out how to see author information on the Buildkite side, but the values look sane when dumped locally.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13189, T12251
Differential Revision: https://secure.phabricator.com/D19614
Summary: Ref T13189. See PHI690. When a lease is first acquired or activated, note the time. This supports better visibility into queue lengths. For now, this is only queryable via DB and visible in the UI, but can be more broadly exposed in the future.
Test Plan: Landed a revision, saw the leases get sensible timestamps for acquisition/activation.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19613
Summary: Ref T13189. Summaries do not appear to be meaningfully rendered with Remarkup so just drop the engine. See D19610 for the previous change in this vein.
Test Plan: Viewed config list with option summaries.
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19612
Summary:
Depends on D19609. Ref T13189. At some point, we switched from RemarkupEngine to RemarkupView and lost this piece of hack-magic.
Restore the hack-magic. It's still hack-magic instead of a real rule, but things are at least cleaner than they were before.
Test Plan: Viewed `auth.require-approval`, etc. Saw references to other config options linked properly.
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19610
Summary: Ref T13189. When there are no setup issues, we currently double-render a weird setup issues box underneath the notice. Get rid of it.
Test Plan: Viewed page with and without setup issues, saw less awkward UI.
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19609
Summary:
Depends on D19607. Ref T13189. See PHI642. Ref T13186.
Some transactions can sometimes be applied to objects you can not edit. Currently, using `*.edit` to edit an object always explicitly requires CAN_EDIT.
Now that individual transactions require CAN_EDIT by default and can reduce or replace this requirement, stop requiring CAN_EDIT to reach the editor.
The only expected effect of this change is that low-permission edits (like disabling a user, leaving a project, or leaving a thread) can now work via `*.edit`.
Test Plan:
- Tried to perform a normal edit (changing a task title) against an object with no CAN_EDIT. Still got a permissions error.
- As a non-admin, disabled other users while holding the "Can Disable Users" permission.
- As a non-admin, got a permissions error while trying to disable other users while not holding the "Can Disable Users" permission.
Reviewers: amckinley
Maniphest Tasks: T13189, T13186
Differential Revision: https://secure.phabricator.com/D19608
Summary:
Depends on D19606. Ref T13189. See PHI642.
- Disabling/enabling users no longer requires admin. Now, you just need "Can Disable Users".
- Update the UI to appropriately show the action in black or grey depending on what clicking the button will do.
- For "Approve/Disapprove", fix a couple bugs, then let them go through without respect for "Can Disable Users". This is conceptually a different action, even though it ultimately sets the "Disabled" flag.
Test Plan:
- Disabled/enabled users from the web UI as various users, including a non-administrator with "Can Disable Users".
- Hit permissions errors from the web UI as various users, including an administrator without "Can Disable Users".
- Saw the "Disable/Enable" action activate properly based on whether clicking the button would actually work.
- Disapproved a user without "Can Disable Users" permission, tried to re-disapprove a user.
- Approved a user, tried to reapprove a user.
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19607
Summary:
Depends on D19605. Ref T13189. See PHI642. This adds a separate "Can Disable Users" capability, and makes the underlying transaction use it.
This doesn't actually let you weaken the permission, since all pathways need more permissions:
- `user.edit` needs CAN_EDIT.
- `user.disable/enable` need admin.
- Web UI workflow needs admin.
Upcoming changes will update these pathways.
Without additional changes, this does let you //strengthen// the permission.
This also fixes the inability to disable non-bot users via the web UI.
Test Plan:
- Set permission to "No One", tried to disable users. Got a tailored policy error.
- Set permission to "All Users", disabled/enabled a non-bot user.
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19606
Summary:
Depends on D19604. Ref T13189. See PHI642. Deprecates these in favor of "user.edit", redefines them in terms of it, and removes the old `disableUser()` method.
I kept the "is admin" permissions check for consistency, since these methods have always said "(admin only)". This check may not be the most tailored check soon, but we can just keep executing it in addition to the real check.
For now, this change stops this method from actually disabling non-bot users (since it implicitly adds a CAN_EDIT requirement, and even administrators don't have that). An upcoming change will fix that.
Test Plan: Enabled and disabled a (bot) user via these methods. Checked API UI, saw them marked as "disabled".
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19605
Summary:
Ref T13189. See PHI642. Upgrades the "Disable" action in the web UI to be transaction-based.
This technically breaks things a little (you can't disable non-bot users, since they now require CAN_EDIT and you won't have it) but an upcoming change will fix the permissions issue.
Test Plan: Disabled and enabled a (bot) user from the web UI.
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19604
Summary:
Depends on D19585. Ref T13164.
Almost all transactions require CAN_EDIT on the object, but they generally do not enforce this directly today. Instead, this is effectively enforced by Controllers, API methods, and EditEngine doing a `CAN_EDIT` check when loading the object to be edited.
A small number of transactions do not require CAN_EDIT, and instead require only a weaker/lesser permission. These are:
- Joining a project which you have CAN_JOIN on.
- Leaving a project which isn't locked.
- Joining a Conpherence thread you can see (today, no separate CAN_JOIN permission for Conpherence).
- Leaving a Conpherence thread.
- Unsubscribing.
- Using the special `!history` command from email.
Additionally, these require CAN_INTERACT, which is weaker than CAN_EDIT:
- Adding comments.
- Subscribing.
- Awarding tokens.
Soon, I want to add "disabling users" to this list, so that you can disable users if you have "Can Disable User" permission, even if you can not otherwise edit users.
It's possible this list isn't exhaustive, so this change might break something by adding a policy check to a place where we previously didn't have one. If so, we can go weaken that policy check to the appropriate level.
Enforcement of these special cases is currently weird:
- We mostly don't actually enforce CAN_EDIT in the Editor; instead, it's enforced before you get to the editor (in EditEngine/Controllers).
- To apply a weaker requirement (like leaving comments or leaving a project), we let you get through the Controller without CAN_EDIT, then apply the weaker policy check in the Editor.
- Some transactions apply a confusing/redundant explicit CAN_EDIT policy check. These mostly got cleaned up in previous changes.
Instead, the new world order is:
- Every transaction has capability/policy requirements.
- The default is CAN_EDIT, but transactions can weaken this explicitly they want.
- So now we'll get requirements right in the Editor, even if Controllers or API endpoints make a mistake.
- And you don't have to copy/paste a bunch of code to say "yes, every transaction should require CAN_EDIT".
Test Plan:
- Tried to add members to a Conpherence thread I could not edit (permissions error).
- Left a Conpherence thread I could not edit (worked properly).
- Joined a thread I could see but could not edit (worked properly).
- Tried to join a thread I could not see (permissions error).
- Implemented `requireCapabilites()` on ManiphestTransactionEditor and tried to edit a task (upgrade guidance error).
- Mentioned an object I can not edit on another object (works).
- Mentioned another object on an object I can not edit (works).
- Added a `{F...}` reference to an object I can not edit (works).
- Awarded tokens to an object I can not edit (works).
- Subscribed/unsubscribed from an object I can not edit (works).
- Muted/unmuted an object I can not edit (works).
- Tried to do other types of edits to an object I can not edit (correctly results in a permissions error).
- Joined and left a project I can not edit (works).
- Tried to edit and add members to a project I can not edit (permissions error).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19586
Summary:
Ref T13187. See PHI811. If the file tree is enabled and visible, set the default tab to "History".
- This is a bit magic.
- It won't work entirely on mobile (we can't tell that you're on mobile on the server, so we'll pick the "History" tab even though the file tree isn't actually visible on your device).
- There's no corresponding logic in Diffusion. Diffusion doesn't have the same tab layout, but this makes things somewhat inconsistent.
So I don't love this, but we can try it and see if it's confusing or helpful on the balance.
Test Plan: With filetree on and off, reloaded revisions. Saw appropriate tab selected by default.
Reviewers: amckinley
Maniphest Tasks: T13187
Differential Revision: https://secure.phabricator.com/D19601
