Summary:
Ref T13283. Since D14575, we already pass applied transactions to Herald, but they exist only as a backwards compatibility layer and have no upstream callsites.
Save the applied transaction PHIDs as part of the object transcript, and show them in the UI.
Test Plan:
- Viewed a modern transcript, saw a list of transactions.
- Viewed an older transcript, saw nothing (since there were no transactions in the transcript).
{F6456431}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13283
Differential Revision: https://secure.phabricator.com/D20518
Summary:
Depends on D20516. See PHI1247. In D20331, I made the crumbs on workboards point at ancestor workboards.
However, this isn't a great destination if an ancestor doesn't actually have a workboard. In this case, point at the normal profile URI instead.
Test Plan:
- Viewed a milestone workboard with a parent that had no workboard. Saw a profile link instead of a workboard link (new behavior).
- Viewed a milestone workboard with a parent that also had a workboard. Saw a workboard link (existing old behavior still works).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20517
Summary:
Ref T13276. Previously, these edges were added directly with an `EdgeEditor`, so they did not generate transaction stories.
Now, they're added properly, but they aren't terribly useful in feed/mail. Hide them in those contexts, like we already do with other types of similar edges.
Test Plan: Will verify behavior on `secure`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20491
Summary:
See PHI1209. When a task is in "Hard Lock" mode, it's still possible to apply some changes to it. Notably:
- You can subscribe/unsubscribe.
- You can mention it on another object.
- You can add a relationship from some other object to it (e.g., select it as a "Parent Task" for some other task).
Currently, these types of edits will show a "Lock Overridden" timeline emblem icon. However, they should not: you didn't override a lock to make these changes, they just bypass locks.
For now, special case these cases (self subscribe/unsubscribe + inverse edge edits) so they don't get the little icon, since I think this list is exhaustive today.
Some day we should modularize this, but we'd need code like this anyway (since TYPE_SUBSCRIBE is not modular yet), and this seems unlikely to cause problems even if it's a bit rough.
Test Plan:
- Hard-locked a task.
- Subscribed/unsubscribed, mentioned, relationship'd it as a non-author. No timeline emblems.
- Soft-locked a task.
- Subscribed/unsubscribed, mentioned, relationship'd it, no timeline emblems.
- Clicked "Edit", answered "yes" to the override prompt, edited it. Got a timeline emblem.
- Added some comments and stuff to a normal non-locked task, no emblems.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20513
Summary:
See PHI1247. If you remove the Workboard from a project profile menu, then navigate to the URI, we currently fatal when trying to select the "Workboard" item.
Instead, only try to select the item if some matching item is present.
Test Plan:
- Disabled the workboard on a project, navigated to `/board/`, got a sensible page with no navigation item selected instead of a fatal.
- Viewed a normal workboard, saw the correct selection.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20516
Summary: Ref PHI1166. I'm documenting our dependencies, and we have approximately 5,000 lines of external code to support WePay as a Phortune provider. We don't use it, I'm almost certain it doesn't work, and we have no plans to use it in the near future. If we did pursue it, I'd probably just wrap the API in a 100-line `WePayFuture` anyway since 5K lines of dependencies to make a couple method calls is ridiculous.
Test Plan: Grepped for `wepay`, `httpful`, `restful`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: aurelijus
Differential Revision: https://secure.phabricator.com/D20521
Summary: Ref T13276. This edge is pointed the wrong way. Point it the right way.
Test Plan: Will verify production works better.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20490
Summary:
Depends on D20475. Ref T13272. Currently, if you `JX.Request` with `data` like `{x: null}`, we submit that as `?x=null`, i.e. as though `null` was the string `"null"`.
This is weird and almost certainly never intended/desiarable. In particular, it causes a bug where panels embedded inside tab panels are incorrectly draggable.
It's possible this breaks something which relied on the buggy behavior, but that seems unlikely.
Test Plan: Tried to drag a panel inside a tab panel, it really truly didn't work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20476
Summary: Depends on D20474. Ref T13272. Provide an easy way to rearrange tabs on a tab panel, by moving them left or right from the context menu.
Test Plan: Moved tabs left and right. Tried to move them off the end of the tab list, no luck.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20475
Summary:
Depends on D20473. Ref T13272. Fixes T7216. If you want to tweak the query a panel uses, you currently have to complete 7 Great Labors.
Instead, add a "Customize Query" action which lets you update the query inline.
Test Plan: {F6402171}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272, T7216
Differential Revision: https://secure.phabricator.com/D20474
Summary:
Depends on D20469. Ref T13276. See PHI1159. See PHI953. See PHI901.
Allow Herald to detect when "arc land" would (or did) warn users about failed or ongoing builds. This respects the "Warn on Landing" build plan behavior.
To accomplish this:
- When we close a revision, set a "wrong build state" flag if it lands in the wrong build state.
- If the revision is closed when we hit Herald, look for the flag.
- If not (common for push rules, can happen for commit rules if we race against the revision update worker), hit Harbormaster ourselves and check the current state.
Test Plan:
- Wrote a "Require Green" rule.
- Ran it against various commits with various build states (good, not good).
- Fiddled with "Warn on Landing" and saw the effect in rule evaluation.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20470
Summary:
Depends on D20468. Ref T13276. See PHI1008.
When a commit or revision "reverts <hash>", and that's the hash of a commit which has a revision, also write a "reverts" edge to the revision.
Test Plan:
Created "reverts X" objects for:
- a revision;
- a commit;
- a commit with a revision (both got marked properly).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20469
Summary:
Depends on D20467. Ref T13277. Currently, the "MessageParserWorker" writes this property on commits, then Herald and Audit both read it.
Make them share code so this property has one writer and one reader. This property isn't great, but at least now the badness is hidden.
Currently, we can't just use edges because they may not have been written yet. I am likely to just do this, soon:
- Just write the edges (in "MessageParserWorker").
- Hide the edges from mail.
However, we'll sort-of lose the "revisionMatchData" explanation thing if I do that. Maybe this is fine? But when commits match because hashes match, it legitimately isn't obvious.
For now, just reduce the amount of harm/badness here.
Test Plan:
- Ran `bin/repository reparse --publish ...`.
- Ran a Herald "Audit" rule using the "Accepted Differential revision" field.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20468
Summary: See PHI1220. Ref T13272. I accidentally left the ability to set a query limit behind when updating this.
Test Plan: Edited a query panel, set/removed the limit, tried to set an invalid limit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20472
Summary:
Depends on D20472. Ref T13272. Currently, when you edit a panel from a dashboard, we try to add the panel to the dashboard. This always works since dashboards no longer enforce panel uniqueness, and you can end up with duplicate panels.
Instead, only add panels if we're creating them.
Test Plan:
- Edited an existing panel, no duplication.
- Created a new panel, saw it added to the dashboard.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20473
Summary:
This hasn't been updated in a bit more than a year (last updated in D18594) and we've accumulated a fair number of SQL patches. Update it.
This is mostly automatic (with `bin/storage quickstart`), except:
- Manual edit to one migration for a missed callsite to `DashboardInstall`.
- Replaced two InnoDB tables that still have FULLTEXT indexes with MyISAM (see rP6cedd4a95cfc).
This is not really possible to review and more for reference than examination. `bin/storage quickstart` has historically worked correctly.
Test Plan: I have great faith that `bin/storage quickstart` is a script which creates a big `.sql` file.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20480
Summary:
If you edit an auth message in Auth > Customize Messages, then click "Show Details" in the transaction record, the resulting dialog uses the object's handle's URI to generate a "cancel" button.
Since these handles currently have no URI, the dialog currently has no cancel/done button to close it.
Test Plan: Edited an auth message, clicked "Show Details", was now able to click "Done" to close the dialog.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20471
Summary:
See PHI985. I think we pretty much need to start applying language-specific rules, but we can apply at least one more relatively language-agnostic rule: don't match lines which are indented 3+ levels.
In C++, we may have symbols like this:
```
class X {
public:
int m() { ... }
}
```
..but I believe no mainstream language puts symbol definitions 3+ levels deep.
Also clean up some of the tab handling very slightly.
Test Plan: Tests pass, looked at some C++ code and got slightly better (but still not great) matches.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20479
Summary:
See PHI1218. When rendering "A vs B", we currently show the properties of diff A without modification.
Instead, take properties from the same place we're taking change details.
See T12664 for a followup.
Test Plan:
- In diff A, removed "+x" from a file.
- In diff B, changed the file but did not remove "+x" from it.
- Diffed B vs A.
- Before change: UI incorrectly shows "+x" removed (both sides incorrect, just showing the change from diff A).
- After change: UI shows 100644 -> null, which is half right.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20478
Summary:
See <https://discourse.phabricator-community.org/t/unable-to-reload-object-that-hasnt-been-loaded/2677>.
When editing "Config" objects, they currently get a PHID set outside of the TransactionEditor. They probably should not, but fixing that is likely an involved change.
This causes us to incorrectly fail to detect `$is_new` correctly and try to `reload()` and object with no ID.
To work around this, test for new objects with `getID()` instead of `getPHID()`.
Test Plan: Edited any config value with the web UI.
Reviewers: amckinley
Differential Revision: https://secure.phabricator.com/D20482
Summary:
Depends on D20466. Ref T13277. Currently:
- The "Owners" worker writes ownership relationships (e.g., commit X affects package Y, because it touches a path in package Y) -- these are just edges.
- It also triggers audits.
- Then it queues a "Herald" worker.
- This formally publishes the commit and triggers Herald.
These aren't really separate steps and can happen more easily in one shot. Merge them.
Test Plan:
- Ran `bin/repository reparse --publish` to republish various commits, got sensible behavior.
- Grepped for "IMPORTED_OWNERS", "IMPORTED_HERALD", "--herald", "--owners", and "--force-local" flags.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20467
Summary:
Depends on D20465. Ref T13277. Currently, when a commit is unpublished, we put a single line about it on the "Edit Commit" page. This is pretty much impossible to find.
Move it to the main page. This treatment is more big/bold than I'd probably like to end up, but we should probably overshoot on the explanatory text until users get used to this behavior.
Also, allow searching for only published / unpublished commits.
Test Plan: {F6395705}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20466
Summary:
Depends on D20464. Ref T13277. Broadly:
- Move all the "should publish X" and "why aren't we publishing X" stuff to a separate class (`PhabricatorRepositoryPublisher`).
- Rename things to be more consistent with modern terminology ("Publish", "Permanent Refs").
Test Plan:
This could use some trial-by-fire on `secure`, but:
- Grepped for all symbols.
- Viewed various commits.
- Reparsed commits.
- Here's a commit with an explanation:
{F6394569}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20465
Summary: Depends on D20463. Ref T13277. This flag was added some time before 2015 and I don't think I've ever used it. Just get rid of it.
Test Plan: Grepped for `force-autoclose`, `forceAutoclose`, `AUTOCLOSE_FORCED`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20464
Summary:
Depends on D20462. Ref T13276. Currently, the "Message" parser also updates related tasks and revisions when a commit is published.
For PHI1165, which ran into a race with message parsing, I originally believed we needed to separate this logic and lock + yield to avoid the race. D20462 provides what is probably a better approach for avoiding the race.
Still, I think separating these "update related revisions" and "updated related tasks" chunks into separate workers is a net improvement. There may still be some value in doing lock + yield in the future to deal with other issues, and when we occasionally run into problems with pulling a diff out of the repository to update the revision (usually because the diff is too big) this isolates the problem better and allows the commit to import.
I think the only thing to watch out for here is that Herald may now run before the revision and commit are attached to one another. This is fine for all current Herald rules, we just need to be mindful in implementing new rules.
Test Plan: Used `bin/repository reparse --message` on various commits, including commits that close revisions and close tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20463
Summary:
Depends on D20461. Ref T13276. Ref T13054.
Currently, we acquire the transaction read lock after populating "old values" in transactions and filtering transactions with no effect.
This isn't early enough to prevent all weird chaotic races: if two processes try to apply a "close revision" transaction at the same time, this can happen:
```
PROCESS A PROCESS B
Old Value = Open Old Value = Open
Transaction OK: Yes Transaction OK: Yes
Acquire Read Lock Acquire Read Lock
Got Read Lock! Wait...
Apply Transactions Wait...
New Value = Closed Wait...
Release Lock Wait...
Got Read Lock!
Apply Transactions
New Value = Closed
Release Lock
```
That's not great: both processes apply an "Open -> Closed" transaction since this was a valid transaction from the viewpoint of each process when it did the checks.
We actually want this:
```
PROCESS A PROCESS B
Acquire Read Lock Acquire Read Lock
Got Read Lock! Wait...
Old Value = Open Wait...
Transaction OK: Yes Wait...
Apply Transactions Wait...
New Value = Closed Wait...
Release Lock Wait...
Got Read Lock!
>>> Old Value = Closed
>>> Transaction Has No Effect!
>>> Do Nothing / Abort
Release Lock
```
Move the "lock" part up so we do that.
This may cause some kind of weird second-order effects, but T13054 went through pretty cleanly and we have to do this to get correct behavior, so we can survive those if/when they arise.
Test Plan:
- Added a `sleep(10)` before the lock.
- Ran `bin/repository message --reparse X` in two console windows, where X is a commit that closes revision Y and Y is open.
- Before patch: both windows closed the revision and added duplicate transactions.
- After patch: only one of the processes had an effect.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: jmeador
Maniphest Tasks: T13276, T13054
Differential Revision: https://secure.phabricator.com/D20462
Summary: Depends on D20459. Ref T13276. I'll file a followup to actually destroy the table.
Test Plan:
- Grepped for `TABLE_COMMIT`.
- Ran `bin/storage upgrade -f`, got a clean bill of health.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20461
Summary:
Depends on D20458. Ref T13276. Although I'm not thrilled about "needCommitPHIDs()", it has a few callers, including custom fields. Allow "need + attach + get" to survive for now since they're reasonably modern, at least.
However, use edges instead of "TABLE_COMMIT" and require `need...()` + `get...()`, removing the direct `load...()`.
Also remove `RevisionQuery->withCommitPHIDs(...)`, which has no callers.
Test Plan:
- Grepped for `loadCommitPHIDs` (only two hits, the private `RevisionQuery` method).
- Called "differential.getrevision", got commits.
- Viewed a revision, saw "Commits: ...".
- Grepped for `withCommitPHIDs()`, no callers on `RevisionQuery` (some other query classes have methods with this name).
- Called "differential.query", got commits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20459
Summary: Depends on D20457. Ref T13276. Kill all remaining callers to this method and delete it.
Test Plan:
- Grepped for `loadIDsByCommitPHIDs`.
- Viewed blame again to make sure I didn't break it.
- Viewed "History" view for commits with revisions.
- Viewed "Graph" view for commits with revisions.
- Viewed "Merged Commits" table for commits with revisions.
- Viewed "Compare" table for commits with revisions.
- Viewed "Repository" main page history table for commits with revisions.
- Grepped for `linkRevision`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20458
Summary:
Ref T13276. Differential has a pre-edge "TABLE_COMMIT" with about a half-dozen weird callers I'd like to get rid of.
Move blame to use edges instead. (Bonus: this makes blame respect edge edits in the UI.)
Since there are some more callers to clean up this code may move into some "RelatedObjectQueryThing" class or something, but I'm taking it one step at a time for now.
Test Plan: {F6394106}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13276
Differential Revision: https://secure.phabricator.com/D20457
Summary:
Depends on D20445. Ref T13279. I'm not sure what the class tree of functions actually looks like, and I suspect it isn't really a tree, so I'm hesitant to start subclassing. Instead, try adding some `isSomethingSomething()` methods.
We have some different types of functions:
# Some functions can be evaluated anywhere, like "constant(3)", which always evaluates to 3.
# Some functions can't be evaluated anywhere, but have values everywhere in some domain. This is most interesting functions, like "number of open tasks". These functions also usually have a distinct set of interesting points, and are constant between those points (any count of anything, like "open points in project" or "tasks closed by alice", etc).
# Some functions can be evaluated almost nowhere and have only discrete values. This is most of the data we actually store, which is just "+1" when a task is opened and "-1" when a task is closed.
Soon, I'd like to be able to show ("all tasks" - "open tasks") and draw a chart of closed tasks. This is somewhat tricky because the two datasets are of the second class of function (straight lines connecting dots) but their "interesting" x values won't be the same (users don't open and close tasks every second, or at the same time).
The "subtract X Y" function will need to be able to know that `subtract "all tasks" 3` and `subtract "all tasks" "closed tasks"` evaluate slightly differently.
To make this worse, the data we actually //store// is of the third class of function (just the "derivative" of the line chart), then we accumulate it in the application after we pull it out of the database. So the code will need to know that `subtract "derivative of all tasks" "derivative of closed tasks"` is meaningless, or the UI needs to make that clear, or it needs to interpret it to mean "accumulate the derivative into a line first".
Anyway, I'll sort that out in future changes. For now, simplify the easy case of functions in class (1), where they're just actual functions.
Add "shift(function, number)" and "scale(function, number)". These are probably like "mul" and "add" but they can't take two functions -- the second value must always be a constant. Maybe these will go away in the future and become `add(function, constant(3))` or something?
Test Plan: {F6382885}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20446
Summary:
Depends on D20444. Ref T13279. Instead of ad-hoc parsing and messages, formalize chart function arguments.
Also, add a whole lot of extra type checking.
Test Plan: Built and charted various functions with various valid and invalid argument lists, got sensible-seeming errors and results.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20445
Summary:
See PHI1213. If we don't have identities for "revision X closed by commit Y" stories, just do the plain non-attribution rendering rather than trying to fall back. Falling back won't work since we don't load the data, which should be OK now since identities seem like they're in generally good shape.
(We could probably just throw out the fallback behavior instead, but we can always clean things up later.)
Test Plan: Forced no commit identity on a revision, loaded it, saw reasonable story rendering.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20460
Summary:
Ref T13266. See <https://discourse.phabricator-community.org/t/notification-page-throws-unrecoverable-fatal-error/2651/>.
The "notifications" query currently uses offset paging for no apparent reason (just a legacy issue?), so some of the paging code is only reachable internally.
- Stop it from using offset paging, since modern cursor paging is fine here (and Feed has used cursor paging for a long time).
- Fix the non-offset paging to work like Feed.
Also:
- Remove a couple of stub methods with no callsites after cursor refactoring.
Test Plan:
- Set things up so I had more than 100 notifications and some in the first 100 were policy filtered, to reproduce the issue (I just made `FeedStory` return `NO_ONE` as a visibility policy).
- Applied the patch, notifications now page cleanly.
- Verified that "Next Page" took me to the right place in the result list.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: hskiba
Maniphest Tasks: T13266
Differential Revision: https://secure.phabricator.com/D20455
Summary:
Ref T13280. In D20421, I changed our observe strategy to `git fetch <uri>` in all cases.
This doesn't work in an ancient, non-bare repository if `master` is checked out and `master` is also fetch: `git` refuses to overwrite the local ref unless we pass `--update-head-ok`. Pass this flag.
Also, remove some code which examines branches and tags in a special way for non-bare working copies. The old `git fetch <origin>` code without explicit revsets meant that `refs/remotes/orgin/heads/xyz` got updated instead of `refs/heads/xyz`. We now update our local refs in all cases (bare and non-bare) so we can throw away this special casing.
Test Plan:
- Replaced a modern bare working copy with a non-bare working copy by explicitly using `git clone` without `--bare`.
- Ran `bin/repository update`, hit the `--update-head-ok` error. Applied the patch, got a clean update.
- Used the "repository.branchquery" API method...
- ...with "contains" to trigger the "git branch" case. Got identical results after removing the special casing.
- ...without "contains" to trigger the "low level ref" case. Got identical results after removing the special casing.
- Grepped for `isWorkingCopyBare()`. The only remaining callsites deal with hook paths, and genuinely need to be specialized.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13280
Differential Revision: https://secure.phabricator.com/D20450
Summary:
Ref T13279. Charting changes alter how the "line-chart" behavior works, but the "Burnup Chart" still relies on the old behavior.
Although I'm intending to remove "Maniphest > Reports" once Facts is a minimally sufficient replacement, copy this behavior to keep it working until we're ready to pull the trigger.
Also fix a leftover typo from D20435.
Test Plan: Viewed a legacy Maniphest burnup rate report.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20449
Summary: This always bugs me when I'm going through `secure` looking for the spiciest macros.
Test Plan: Forced a date to be null, saw reasonable text.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20453
Summary:
Depends on D20443. Ref T13279. This is probably not terribly useful on its own, but is mostly a function which takes another function as an argument, and a step toward more useful functions like arithmetic and drawing a picture of an owl.
The only structural change here is that functions now read data parameters (domain, sample limit) using a more tailored "ChartDataQuery" instead of reading the actual axis. Mostly, I want a more cohesive representation of query state that can be easily passed to sub-functions, as here.
Test Plan: {F6382432}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20444
Summary:
Depends on D20442. Ref T13279. Add basic support for drawing chart functions that are not based on Facts first-party ETL datasets. Some general goals:
- This might be useful to draw a line like "goal" or "profitability".
- This might be useful to pull data from an external source.
- For composable functions like "add" or "subtract", which are useful in manipulating ETL datasets, these value functions will make testing easier.
Test Plan:
Added a `constant(256)` function:
{F6382408}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20443
Summary:
Depends on D20441. Ref T13279. Currently, we pull all the data, then decide what the X-axis should look like.
Since users will reasonably want to do stuff like "show me march-april 2018" in the future, we need to move toward flipping this around so that we can support cases where the domain is specified by the user.
For actual chart functions (like "constant(3)" or "cos(x)"), we must also know the domain before we pull data, since there are an infinite number of places where we can evaluate the function "constant(3)".
See note in T13279 about continunity.
Test Plan: {F6382356}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20442
Summary:
Depends on D20440. Ref T13279. Create a class to represent a chartable function: something we can get some data points out of.
Then, make the chart chart two functions.
For now, the only supported function is "fact(key)", which pulls data from the Facts ETL pipeline, identified by "key", and takes no other arguments.
In future changes, I plan to support things like "fact(tasks.open.project, PHID-PROJ-xyz)", "constant(1000)" (e.g. to draw a goal line), "sum(fact(...), fact(...))" (to combine data from several projects), and so on.
The UI may not expose this level of power for a while (or maybe ever) but until we get close enough to the UI that these features are a ton of extra work I'm going to try to keep things fairly flexible/modular.
Test Plan: {F6382286}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20441
Summary:
Depends on D20439. Ref T13279. Some day, charts will probably need to reload themselves or do a bunch of defer/request-shaping magic when they're on a dashboard with 900 other charts.
Give the controller separate "HTML placeholder" and "actual data" modes, and make the placeholder fetch the data in a separate request.
Then, make the chart redraw if you resize the window instead of staying at whatever size it started as.
Test Plan:
- Loaded a chart, saw it load data asynchronously.
- Resized the window, saw the chart resize.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20440
Summary:
Ref T13279. I think I'm going to fling some stuff at the wall for a bit here and hope most of it sticks, so this series of changes may not be terribly cohesive or focused. Here:
The range of the chart is locked to "[0, 105% of max]". This is trying to make a pleasing extra margin above the maximum value, but currently just breaks charts with negative values. Later:
- I'll probably let users customize this.
- We should likely select 0 as the automatic minimum for charts with no negative values.
- For charts with positive values, it would be nice to automatically pick a pleasantly round number (25, 100, 1000) as a maximum by default.
We don't have any storage for charts yet. Add some. This works like queries, where every possible configuration gets a short URL slug. Nothing writes or reads this yet.
Rename `fn()` to `css_function()`. This builds CSS functions for D3. The JS is likely to get substantial structural rewrites later on, `fn()` was just particularly offensive.
Test Plan: Viewed a fact series with negative values. Ran `bin/storage upgrade`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20438
Summary:
Depends on D20434. Fixes T5963. Broadly, the issue here is that when:
- You create a new, empty repository.
- Then, you work on some branch other than `master`, without ever creating `master`.
...you get a warning on `git clone`:
> warning: remote HEAD refers to nonexistent ref, unable to checkout
To fix this, point the symbolic-ref HEAD at `refs/heads/<default-branch>` after installing commit hooks.
This fixes the warning, and also means that `git clone` will check out the repository default branch by default, which is nice.
There are a few caveats about this behavior (see T5963 for discussion) but nothing too substantial.
The only real issue is that Git prevents deletion of the default branch without a config setting. Just set that settting.
Test Plan:
See T5963.
In a repository, set `HEAD` to point somewhere invalid. Ran `bin/repository update ...`. Saw HEAD pointed back at the repository default branch.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5963
Differential Revision: https://secure.phabricator.com/D20435
Summary:
Depends on D20433. Ref T13277. Since "Autoclose" no longer exists, update the documentation.
Currently, this documentation focuses a lot on troubleshooting because users historically had a lot of trouble with figuring out why things were or were not autoclosing. I haven't seen any real confusion about this in years, so I suspect we may have improved the import pipeline and/or UI to make this less of a problem.
It's also possible that this document "fixed" the problem, but usually I expect a documentation fix to not affect the frequency of reports, just make them easier to resolve, so I doubt it.
If unclear things remain //and// documentation really did fix it, maybe we can fix the issues. Or we can just put the troubleshooting documentation back.
Test Plan: Read documentation.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277
Differential Revision: https://secure.phabricator.com/D20434
Summary:
Depends on D20432. Ref T13277. Fixes T12967. Removes some "Track Only" hints and warns that the feature is deprecated in favor of "Permanent Refs" and "Fetch Only".
(This "fixes" T12967 by mooting it.)
Test Plan: Viewed "branches" sectino of the manage UI, edited "braches" section of a repository.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13277, T12967
Differential Revision: https://secure.phabricator.com/D20433
