Summary:
Ref T9252. Currently, Harbormaster does this when trying to acquire a working copy:
- Ask for a working copy.
- Yield for 15 seconds.
- Check if we have a working copy yet.
That's OK, but Drydock takes ~1s to acquire a working copy lease if a resource is already available, so we end up doing this:
- T+0: Ask for a working copy.
- T+0: Yield for 15 seconds.
- T+1: Working copy lease activates.
- T+15: Working copy lease is used.
- T+16: Build finishes.
So we end up spending about 2 seconds doing work and 14 seconds sleeping.
One way to fix this would be to fiddle with the yield duration, so we yield for 1, 2, 4, ... seconds or something. This probably isn't a bad idea for longer leases (i.e., wait for 15, 30, 45 ... seconds or similar) but it implies a lot of churn for short leases.
Instead, let tasks "awaken" other tasks when they complete. The "awaken" operation means: if a task is in a yielded state (no failures, no owner, explicitly yielded, future expires time), pretend it only yielded until right now instead of whenever it really yielded to.
Basically, this rewrites history so that even though Harbormaster did a `yield(15)`, we pretend it did a `yield(4)` after we activate the lease if lease activation took 4 seconds.
If this misses, it's fine: we fall back to the normal yield behavior and things move forward normally a few seconds later.
If it hits, we get a more nimble process pretty cleanly.
Test Plan:
- Restarted a build plan (lease working copy + run `ls`) with this patch no-op'd, took about 16 seconds.
- Restarted a build plan with this patch active, took about 1 second.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14178
Summary: Ref T9252. Show the user when a resource or lease has a pending release command in queue.
Test Plan: Released a resource and lease from the web UI. In both cases, saw a "releasing" tag and the action disable.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14177
Summary:
Fixes T6569. This implements an expiry mechanism for Drydock resources which parallels the mechanism for leases.
A few things are missing that we'll probably need in the future:
- An "EXPIRES" command to update the expiration time. This would let resources be permanent while leased, then expire after, say, 24 hours without any leases.
- A callback like `shouldActuallyExpireRightNow()` for resources and leases that lets them decide not to expire at the last second.
- A callback like `didAcquireLease()` for resource blueprints, to parallel `didReleaseLease()`, letting them clear or extend their timer.
However, this stuff would mostly just let us tune behaviors, not really open up new capabilities.
Test Plan: Changed host resources to expire after 60 seconds, leased one, saw it vanish 60 seconds later.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T6569
Differential Revision: https://secure.phabricator.com/D14176
Summary: Ref T9252. This is still crude in a few ways but basically works, at least for commits.
Test Plan:
- Made a build plan with just this build step.
- Ran `bin/harbormaster build --plan 10 ...` on a commit.
- It actually built a working copy, leased it, took no action, and released the lease. MAGIC~~~
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14160
Summary: Ref T9252. This is the same as D14157, just for Resources and their leases.
Test Plan: Viewed a resource, saw only active leases, clicked "View All Leases", queried, clicked around, used crumbs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14158
Summary:
Ref T9252. Currently, Drydock blueprint pages:
- show all resources, even if there are a million;
- show resources in all states, although destroyed resources are usually uninteresting;
- have some junky `$pager` code.
Instead, show the few most recent active resources and link to a filtered resource view in ApplicationSearch.
Test Plan:
- Viewed some blueprints.
- Clicked "View All Resources".
- Saw all resources.
- Used query / crumbs / etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14157
Summary: Ref T9252. If you have a blueprint and you do not like that blueprint very much, you can disable it.
Test Plan: Disabled / enabled some blueprints.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14156
Summary:
Ref T9252. Move these to the more modern stuff to pick up ordering and interface support for free.
Also work around the blueprint / custom field integration a little more gracefully.
Test Plan: Searched for blueprints, resources and leases.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14155
Summary: Ref T9252. Resources always have a corresponding blueprint, and it makes sense to use the same policies for both.
Test Plan: Viewed resources in web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14154
Summary:
Ref T9252. Drydock currently uses integer statuses, but there's no reason for this (they don't need to be ordered) and it makes debugging them, working with them, future APIs, etc., more cumbersome.
Switch to string instead.
Also rename `STATUS_OPEN` to `STATUS_ACTIVE` and `STATUS_CLOSED` to `STATUS_RELEASED` for consistency. This makes resources and leases have more similar states, and gives resource states more accurate names.
Test Plan: Browsed web UI, grepped for changed constants, applied patch, inspected database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14153
Summary:
Ref T9252. Leases currently have a `resourceID`, but this is a bit nonstandard and generally less flexible than giving them a `resourcePHID`.
In particular, a `resourcePHID` is easier to use when rendering interfaces, since you can get handles out of a PHID.
Add a PHID column, copy over all the PHIDs that correspond to existing IDs, then drop the ID column.
Test Plan:
- Browsed web UIs.
- Inspected database during/after migration.
- Grepped for `resourceID`.
- Allocated a new lease with `bin/drydock lease`.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14151
Summary: Ref T9252. This is now more consistent (same as the equivalent Resource state) and accurate (leases can end up in this state a bunch of ways, including by expiring).
Test Plan: `grep`, browsed around web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14150
Summary: Ref T6569. If a lease is activated with an expiration date, schedule a task to try to clean it up after that time.
Test Plan:
- Used `bin/drydock lease ... --until ...` to activate a lease in the near future.
- Waited for a bit.
- Saw it expire and get destroyed at the scheduled time.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T6569
Differential Revision: https://secure.phabricator.com/D14148
Summary:
Ref T9252. This simplifies some Drydock code.
Most of this code relates to the old notion of Drydock being able to enumerate all the tasks it needs to complete in order to acquire a lease. The code has stepped back from this, since it's unnecessary, the queue is more powerful than it used to be, and it would be a lot of work to keep track of.
The ~only thing that should ever wait for leases in modern code is `bin/drydock lease`, and it's fine for it to just sit there sleeping, so this just does that.
This reduces the granularity of logging, but I'll address that separately in future logging-focused changes.
Test Plan: Used `bin/drydock lease` to acquire a lease, saw it acquire cleanly.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14147
Summary: Ref T9252. Some leases or resources may need to remove data, tear down VMs, etc., during cleanup. After they are released, queue a "destroy" phase for performing teardown.
Test Plan:
- Used `bin/drydock lease ...` to create a working copy lease.
- Used `bin/drydock release-lease` and `bin/drydock release-resource` to release the lease and then the working copy and host.
- Saw working copy and host get destroyed and cleaned up properly.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T6569, T9252
Differential Revision: https://secure.phabricator.com/D14144
Summary:
Ref T9252. Broadly, Drydock currently races on releasing objects from the "active" state. To reproduce this:
- Scatter some sleep()s pretty much anywhere in the release code.
- Release several times from web UI or CLI in quick succession.
Resources or leases will execute some release code twice or otherwise do inconsistent things.
(I didn't chase down a detailed reproduction scenario for this since inspection of the code makes it clear that there are no meaningful locks or mechanisms preventing this.)
Instead, add a Harbormaster-style command queue to resources and leases. When something wants to do a release, it adds a command to the queue and schedules a worker. The workers acquire a lock, then try to consume commands from the queue.
This guarantees that only one process is responsible for writes to active resource/leases.
This is the last major step to giving resources and leases a single writer during all states:
- Resource, Unsaved: AllocatorWorker
- Resource, Pending: ResourceWorker (Possible rename to "Allocated?")
- Resource, Open: This diff, ResourceUpdateWorker. (Likely rename to "Active").
- Resource, Closed/Broken: Future destruction worker. (Likely rename to "Released" / "Broken"; maybe remove "Broken").
- Resource, Destroyed: No writes.
- Lease, Unsaved: Whatever wants the lease.
- Lease, Pending: AllocatorWorker
- Lease, Acquired: LeaseWorker
- Lease, Active: This diff, LeaseUpdateWorker.
- Lease, Released/Broken: Future destruction worker (Maybe remove "Broken"?)
- Lease, Expired: No writes. (Likely rename to "Destroyed").
In most phases, we can already guarantee that there is a single writer without doing any extra work. This is more complicated in the "Active" case because the release buttons on the web UI, the release tools on the CLI, the lease requestor itself, the garbage collector, and any other release process cleaning up related objects may try to effect a release. All of these could race one another (and, in many cases, race other processes from other phases because all of these get to act immediately) as this code is currently written. Using a queue here lets us make sure there's only a single writer in this phase.
One thing which is notable is that whatever acquires a lease **can not write to it**! It is never the writer once it queues the lease for activation. It can not write to any resources, either. And, likewise, Blueprints can not write to resources while acquiring or releasing leases.
We may need to provide a mechinism so that blueprints and/or resource/lease holders get to attach some storage to resources/leases for bookkeeping. For example, a blueprint might need to keep some kind of cache on a resource to help it manage state. But I think we can cross that bridge when we come to it, and nothing else would need to write to this storage so it's technically straightforward to introduce such a mechanism if we need one.
Test Plan:
- Viewed buttons in web UI, checked enabled/disabled states.
- Clicked the buttons.
- Saw commands show up in the command queue.
- Saw some daemon stuff get scheduled.
- Ran CLI tools, saw commands get consumed and resources/leases release.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14143
Summary:
Ref T9253. For resources and leases that need to do something which takes a lot of time or requires waiting, allow them to allocate/acquire first and then activate later.
When we allocate a resource or acquire a lease, the blueprint can either activate it immediately (if all the work can happen quickly/inline) or activate it later. If the blueprint activates it later, we queue a worker to handle activating it.
Rebuild the "working copy" blueprint to work with this model: it allocates/acquires and activates in a separate step, once it is able to acquire a host.
Test Plan: With some power of imagination, brought up a bunch of working copies with `bin/drydock lease --type working-copy ...`
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14127
Summary: Ref T9253. Provide a meaningful command interface for Almanac hosts.
Test Plan:
Configued and leased a real host (`sbuild001.phacility.net`) and ran a command on it.
```
$ ./bin/drydock command --lease 90 -- ls /
bin
boot
core
dev
etc
home
initrd.img
lib
lib64
lost+found
media
mnt
opt
proc
root
run
sbin
srv
sys
tmp
usr
var
vmlinuz
```
Reviewers: chad, hach-que
Reviewed By: chad, hach-que
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14126
Summary: Ref T9253. We had some un-modern use of UI elements, clean that up. Add a tab for showing slot locks so you don't have to fish around in the database.
Test Plan: Looked at blueprints, resources and leases. Looked at slot locks.
Reviewers: chad, hach-que
Reviewed By: chad, hach-que
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14119
Summary:
See discussion in D10304. There's a lot of context there, but the general idea is:
- Blueprints should manage locks in a granular way during the actual allocation/acquisition phase.
- Optimistic "slot locks" might a pretty good primitive to make that easy to implement and reason about in most cases.
The way these locks work is that you just pick some name for the lock (like the PHID of a resource) and say that it needs to be acquired for the allocation/acquisition to work:
```
...
->needSlotLock("mylock(PHID-XYZQ-...)")
...
```
When you fire off the acquisition or allocation, it fails unless it could acquire the slot with that name. This is really simple (no explicit lock management) and a pretty good fit for most of the locking that blueprints and leases need to do.
If you need to do limit-based locks (e.g., maximum of 3 locks) you could acquire a lock like this:
```
mylock(whatever).slot(2)
```
Blueprints generally only contend with themselves, so it's normally OK for them to pick whatever strategy works best for them in naming locks.
This may not work as well if you have a huge number of slots (e.g., 100TB you want to give out in 1MB chunks), or other complex needs for locks (like you have to synchronize access to some external resource), but slot locks don't need to be the only mechanism that blueprints use. If they run into a problem that slot locks aren't a good fit for, they can use something else instead. For now, slot locks seem like a good fit for the problems we currently face and most of the problems I anticipate facing.
(The release workflows have other race issues which I'm not addressing here. They work fine if nothing races, but aren't race-safe.)
Test Plan:
To create a race where the same binding is allocated as a resource twice:
- Add `sleep(10)` near the beginning of `allocateResource()`, after the free bindings are loaded but before resources are allocated.
- (Comment out slot lock acquisition if you have this patch.)
- Run `bin/drydock lease ...` in two windows, within 10 seconds of one another.
This will reliably double-allocate the binding because both blueprints see a view of the world where the binding is free.
To verify the lock works, un-comment it (or apply this patch) and run the same test again. Now, the lock fails in one process and only one resource is allocated.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Differential Revision: https://secure.phabricator.com/D14118
Summary:
Ref T9253. Broadly, this realigns Allocator behavior to be more consistent and straightforward and amenable to intended future changes.
This attempts to make language more consistent: resources are "allocated" and leases are "acquired".
This prepares for (but does not implement) optimistic "slot locking", as discussed in D10304. Although I suspect some blueprints will need to perform other locking eventually, this does feel like a good fit for most of the locking blueprints need to do.
In particular, I've made the blueprint operations on `$resource` and `$lease` objects more purposeful: they need to invoke an activator on the appropriate object to be implemented correctly. Before they invoke this activator method, they configure the object. In a future diff, this configuration will include specifying slot locks that the lease or resource must acquire. So the API will be something like:
$lease
->setActivateWhenAcquired(true)
->needSlotLock('x')
->needSlotLock('y')
->acquireOnResource($resource);
In the common case where slot locks are a good fit, I think this should make correct blueprint implementation very straightforward.
This prepares for (but does not implement) resources and leases which need significant setup steps. I've basically carved out two modes:
- The "activate immediately" mode, as here, immediately opens the resource or activates the lease. This is appropriate if little or no setup is required. I expect many leases to operate in this mode, although I expect many resources will operate in the other mode.
- The "allocate now, activate later" mode, which is not fully implemented yet. This will queue setup workers when the allocator exits. Overall, this will work very similarly to Harbormaster.
- This new structure makes it acceptable for blueprints to sleep as long as they want during resource allocation and lease acquisition, so long as they are not waiting on anything which needs to be completed by the queue. Putting a `sleep(15 * 60)` in your EC2Blueprint to wait for EC2 to bring a machine up will perform worse than using delayed activation, but won't deadlock the queue or block any locks.
Overall, this flow is more similar to Harbormaster's flow. Having consistency between Harbormaster's model and Drydock's model is good, and I think Harbormaster's model is also simply much better than Drydock's (what exists today in Drydock was implemented a long time ago, and we had more support and infrastructure by the time Harbormaster was implemented, as well as a more clearly defined problem).
The particular strength of Harbormaster is that objects always (or almost always, at least) have a single, clearly defined writer. Ensuring objects have only one writer prevents races and makes reasoning about everything easier.
Drydock does not currently have a clearly defined single writer, but this moves us in that direction. We'll probably need more primitives eventually to flesh this out, like Harbormaster's command queue for messaging objects which you can't write to.
This blueprint was originally implemented in D13843. This makes a few changes to the blueprint itself:
- A bunch of code from that (e.g., interfaces) doesn't exist yet.
- I let the blueprint have multiple services. This simplifies the code a little and seems like it costs us nothing.
This also removes `bin/drydock create-resource`, which no longer makes sense to expose. It won't get locking, leasing, etc., correct, and can not be made correct.
NOTE: This technically works but doesn't do anything useful yet.
Test Plan: Used `bin/drydock lease --type host` to acquire leases against these blueprints.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Subscribers: Mnkras
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14117
Summary:
Ref T9253. The Drydock allocator is very pseudocodey right now. Particularly, it was written before Blueprints were concrete.
Reorganize it to make its responsibilities and error handling behaviors more clear.
In particular, the Allocator does not manage locks. It's primarily trying to reject allocations which can not possibly work. Blueprints are responsible for locks. See some discussion in D10304.
NOTE: This code probably doesn't work as written, see future diffs.
Test Plan: See future diffs.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Subscribers: cburroughs
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14114
Summary:
Ref T9253. Some of the Drydock code is pretty old. This applies standard modernizations to it:
- Modernize Query classes to use stuff like `buildWhereClauseParts()` and `loadStandardPage()`.
- Modernize all the getX() / attachX() stuff. In particular:
- Require and attach implementations to Blueprints.
- Require and attach Blueprints to Resources.
- BlueprintImplementations are now always unique per-Blueprint so they can store/cache state if they want without running over one another.
- BlueprintImplementations are now passed a `$blueprint`, like other similar APIs (this could go various ways but I generally like this as a balance of concerns).
NOTE: This probably doesn't run on its own, I'm just trying to split the next diff (core allocator stuff) up a bit and these pieces are all pretty standard.
Test Plan:
- Not much; see next revision or two.
- Clicked around Resource and Blueprint lists.
Reviewers: chad, hach-que
Reviewed By: chad, hach-que
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14113
Summary:
Ref T9253. This comes from a time before Almanac. Now that we have Almanac, it makes much more sense to put this logic there than to try to put it in Drydock itself.
Remove the preallocated host blueprint, a relic of a bygone time.
Test Plan: Grepped for callsites.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14110
Summary: You can already pass other icons, but this makes it a bit simpler.
Test Plan: Test Maniphest, Badges
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14131
Summary: Ref T2015. This fixes issues where the Drydock queries wouldn't filter (or throw an exception) when passed empty arrays for their `with` methods. In addition, this also adds `array_unique` to the resource and lease subqueries so that we don't pull in a bunch of stuff if logs or leases have the same related objects.
Test Plan: Tested it by using DarkConsole on the log controller.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: joshuaspence, Korvin, epriestley
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D10879
Summary: Ref T2015. This allows searching based on blueprints, resources or leases when viewing the logs, which helps when searching for events that occured to a particular blueprint / resource / lease. Unlike the logs shown on the resource / lease pages, the search engine supports paging properly, which means it can be used to find entries in the past.
Test Plan: Used the Drydock log search page.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: joshuaspence, Korvin, epriestley
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D10874
Summary: Show the time in addition to the date in the Drydock logs.
Test Plan: Brought forward from D10479.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: joshuaspence, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D10909
Summary:
Ref T8659. In the general case, this eventually allows build processes to do things like:
- Upload build results (like a ".app" or ".exe" or other binary).
- Pass complex results between build steps (e.g., build step A does something hard and build step B uses it to do something else).
Today, we're a long way away from having the infrastructure for that. However, it is useful to let third party build processes (like Jenkins) upload URIs that link back to the external build results.
This adds `harbormaster.createartifact` so they can do that. The only useful thing to do with this method today is have your Jenkins build do this:
params = array(
"uri": "https://jenkins.mycompany.com/build/23923/details/",
"name": "View Build Results in Jenkins",
"ui.external": true,
);
harbormaster.createartifact(target, 'uri', params);
Then (after the next diff) we'll show a link in Differential and a prominent link in Harbormaster. I didn't actually do the UI stuff in this diff since it's already pretty big.
This change moves a lot of code around, too:
- Adds PHIDs to artifacts.
- It modularizes build artifact types (currently "file", "host" and "URI").
- It formalizes build artifact parameters and construction:
- This lets me generate usable documentation about how to create artifacts.
- This prevents users from doing dangerous or policy-violating things.
- It does some other general modernization.
Test Plan:
{F715633}
{F715634}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8659
Differential Revision: https://secure.phabricator.com/D13900
Summary: Poked through the Drydock controllers and updated the codes.
Test Plan: Built random fake stuff in Drydock
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13731
Summary: Use `PhutilClassMapQuery` where appropriate.
Test Plan: Browsed around the UI to verify things seemed somewhat working.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13429
Summary: Fixes T8655. This isn't actually a table -- just use `setContent()`.
Test Plan: Loaded leases in redesign-2015.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8655
Differential Revision: https://secure.phabricator.com/D13431
Summary:
Fixes T6787. I'm kind of cheating a little bit here by not unifying default selection with `initializeNew(...)` methods, but I figure we can let this settle for a bit and then go do that later. It's pretty minor.
Since we're not doing templates I kind of want to swap the `'template'` key to `'type'` so maybe I'll do that too at some point.
@chad, freel free to change these, I was just trying to make them pretty obvious. I //do// think it's good for them to stand out, but my approach is probably a bit inconsistent/heavy-handed in the new design.
Test Plan:
{F525024}
{F525025}
{F525026}
{F525027}
Reviewers: btrahan, chad
Reviewed By: btrahan
Subscribers: johnny-bit, joshuaspence, chad, epriestley
Maniphest Tasks: T6787
Differential Revision: https://secure.phabricator.com/D13387
Summary: Ref T8099. This adds a new class which all search engines return for layout. I thought about this a number of ways, and I think this is the cleanest path. Each Engine can return whatever UI bits they needs, and AppSearch or Dashboard picks and lays the bits out as needed. In the AppSearch case, interfaces like Notifications, Calendar, Legalpad all need more custom layouts. I think this also leaves a resonable path forward for NUX as well. Also, not sure I implemented the class correctly, but assume thats easy to fix?
Test Plan: Review and do a search in each application changed. Grep for all call sites.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13332
Summary: This drops the Windows-specific escaping code for the creation of directories when acquiring a lease. This is basically the change from D10378 without the other, no longer necessary changes.
Test Plan: This code hasn't been run in a production environment for a while (any instances of Phabricator using Drydock / Harbormaster with Windows have had this code removed by the D10378 patch for a while).
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Projects: #drydock
Differential Revision: https://secure.phabricator.com/D13341
Summary: Ref T2015. This code is only relevant when attempting to run commands on a Windows host over SSH. Since SSH on Windows is extremely fragile and hard to maintain, and WinRM is a better long-term solution, drop this code (which will end up being unused when later diffs introduce the WinRM command interface).
Test Plan: This code won't be used when D10495 lands.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Projects: #drydock
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D13340
Summary: I think that I've caught the bulk of these issues now.
Test Plan: Eyeball it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13296
Summary: All classes should extend from some other class. See D13275 for some explanation.
Test Plan: `arc unit`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13283
Summary:
Ref T5681. Ref T6860. This doesn't do anything interesting on its own, just makes the next diff smaller.
In the next diff, policies become aware of the types of objects they're acting on. We need to specify which object type all the "Default View/Edit" settings are for so they get the right rules.
For example, a rule like "Allow task author" is OK for "View Policy" on a task, and also OK for "Default View Policy" on ManiphestApplication. But it's not OK for "Can Create Tasks" on ManiphestApplication.
So annotate all the "template"/"default" policies with their types. The next diff will use these to let you select appropriate rules for the given object type.
Test Plan:
- Used `grep` to find these.
- This change has no effect.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5681, T6860
Differential Revision: https://secure.phabricator.com/D13251
Summary: Ref T8099, Moves AphrontPagerView to PHUIPagerView, converts to standard PHUIButtons and adds some additional features for icon placement on buttons.
Test Plan: Tested Advanced Search and Searching files in Diffusion. Works as expected.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8342, T8099
Differential Revision: https://secure.phabricator.com/D13092
Summary: Ref T8099, adds StatusIcons in place of barColor. May need to revisit icons. Also fixed incorrect icons used in Drydock.
Test Plan: Visit Harbormaster, Drydock, see proper icons.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13054
Summary: Ref T8099, Updates Drydock with new StatusIcon over barColor. Making a guess on best icons, feel free to change.
Test Plan: Review Drydock UI in sandbox.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T8341, T8099
Differential Revision: https://secure.phabricator.com/D13053
Summary: Fix some method signatures so that arguments with default values are at the end of the argument list (see D12418).
Test Plan: Eyeballed the callsites.
Reviewers: epriestley, #blessed_reviewers, hach-que
Reviewed By: epriestley, #blessed_reviewers, hach-que
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12782
Summary: Use `__CLASS__` instead of hard-coding class names. Depends on D12605.
Test Plan: Eyeball it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D12806
Summary:
Ref T4100. Ref T5595.
To support a unified "Projects:" query across all applications, a future diff is going to add a set of "Edge Logic" capabilities to `PolicyAwareQuery` which write the required SELECT, JOIN, WHERE, HAVING and GROUP clauses for you.
With the addition of "Edge Logic", we'll have three systems which may need to build components of query claues: ordering/paging, customfields/applicationsearch, and edge logic.
For most clauses, queries don't currently call into the parent explicitly to get default components. I want to move more query construction logic up the class tree so it can be shared.
For most methods, this isn't a problem, but many subclasses define a `buildWhereClause()`. Make all such definitions protected and consistent.
This causes no behavioral changes.
Test Plan: Ran `arc unit --everything`, which does a pretty through job of verifying this statically.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: yelirekim, hach-que, epriestley
Maniphest Tasks: T4100, T5595
Differential Revision: https://secure.phabricator.com/D12453
Summary:
Ref T7199. Convert the single help menu item into a dropdown and allow applications to list multiple items there.
When an application has mail command objects, link them in the menu.
Test Plan:
{F355925}
{F355926}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7199
Differential Revision: https://secure.phabricator.com/D12244
Summary: Fixes T7118. This does the basic "filter the list" thing, though it ends up being a little manual since I guess this hasn't come up before? There is also potential weird behavior if the user was using an app and lost access to it - they will have nothing selected on edit - but I think this is actually correct behavior in this circumstance.
Test Plan:
used a user who couldn't get access to the "quick create" apps and noted that the dropdown list on dashboard panel create was missing the expected engines
ran `arc unit --everything` to verify abstract method implemented everywhere
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7118
Differential Revision: https://secure.phabricator.com/D11687
Summary: Ref T7094. Switch to OmnipotentUser policy-based query since this is usually done offline, etc.
Test Plan: pretty simple code change so I just have my fingers crossed while I am typing this
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7094
Differential Revision: https://secure.phabricator.com/D11655
Summary: This adds a check to make sure the credential exists when loading it in the Drydock SSH interface. This effectively turns a fatal error (calling a method on a non-object) into a catchable exception.
Test Plan: Had a badly configured resource, saw the exception appear instead of daemon fataling.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11530
Summary: Select a similar or better FontAwesome icon to represent each application
Test Plan: Visual inspection
Reviewers: epriestley, btrahan
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11489
Summary: Ref T6822.
Test Plan: `grep`. This method is only called from within `PhutilArgumentWorkflow::__construct`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11415
Summary: Ref T6822. This method needs to be `public` because it is called from `PhabricatorApplicationSearchController::buildApplicationMenu()`.
Test Plan: I wouldn't expect //increasing// method visibility to break anything.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11416
Summary: Ref T5752, moves mobile action menus to the object box instead of crumbs.
Test Plan: View action menus at tablet, desktop, and mobile break points. Verify clicking buttons works as expected opening menu.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T5752
Differential Revision: https://secure.phabricator.com/D11340
Summary: Ref T6822.
Test Plan: Visual inspection. These methods are only called from within `PhabricatorController` subclasses.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11241
Summary: Ref T6822.
Test Plan: Visual inspection. These methods are only called from within the `PhabricatorApplicationSearchEngine` class.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11242
Summary: Fixes T6693.
Test Plan:
Made a bunch of comments on a diff with differential, being sure to leave inlines here and there. This reproduced the issue in T6693. With this patch this issue no longer reproduces!
Successfully "showed older changes" in Maniphest too.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6693
Differential Revision: https://secure.phabricator.com/D10931
Summary:
Ref T5702. This is a forward-looking change which provides some very broad API improvements but does not implement them. In particular:
- Controllers no longer require `$request` to construct. This is mostly for T5702, directly, but simplifies things in general. Instead, we call `setRequest()` before using a controller. Only a small number of sites activate controllers, so this is less code overall, and more consistent with most constructors not having any parameters or effects.
- `$request` now offers `getURIData($key, ...)`. This is an alternate way of accessing `$data` which is currently only available on `willProcessRequest(array $data)`. Almost all controllers which implement this method do so in order to read one or two things out of the URI data. Instead, let them just read this data directly when processing the request.
- Introduce `handleRequest(AphrontRequest $request)` and deprecate (very softly) `processRequest()`. The majority of `processRequest()` calls begin `$request = $this->getRequest()`, which is avoided with the more practical signature.
- Provide `getViewer()` on `$request`, and a convenience `getViewer()` on `$controller`. This fixes `$viewer = $request->getUser();` into `$viewer = $request->getViewer();`, and converts the `$request + $viewer` two-liner into a single `$this->getViewer()`.
Test Plan:
- Browsed around in general.
- Hit special controllers (redirect, 404).
- Hit AuditList controller (uses new style).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5702
Differential Revision: https://secure.phabricator.com/D10698
Summary:
Ref T1191. Now that the whole database is covered, we don't need to do as much work to build expected schemata. Doing them database-by-database was helpful in converting, but is just reudndant work now.
Instead of requiring every application to build its Lisk objects, just build all Lisk objects.
I removed `harbormaster.lisk_counter` because it is unused.
It would be nice to autogenerate edge schemata, too, but that's a little trickier.
Test Plan: Database setup issues are all green.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10620
Summary:
Ref T1191.
- Adds definitions for missing keys and keys with wrong uniqueness. Generally, I defined these before fixing the key query to actually pull all keys and support uniqueness.
- Moves "key uniqueness" to note severity; this is fixable (probably?) and there are no remaining issues.
- Moves "Missing Key" to note severity; missing keys are fixable and all remaining missing keys are really missing (either missing edge keys, or missing PHID keys):
{F210089}
- Moves "Surplus Key" to note seveirty; surplus keys are fixable all remaining surplus keys are really surplus (duplicate key in Harbormaster, key on unused column in Worker):
{F210090}
Test Plan:
- Vetted missing/surplus/unique messages.
- 146 issues remaining.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10590
Summary:
Ref T2015. This increases the Drydock worker lease time to 24 hours. We noticed that some leases took longer than 2 hours when leasing from AWS (the actual resource was successfully leased at around 2 hours, 19 minutes).
24 hours should be plenty enough time to actually lease anything from EC2 (or any other leases during builds).
Test Plan: Have not yet tested this.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D10544
Summary:
Ref T1191. Notable:
- Allowed objects to remove default columns (some feed tables have no `id`).
- Added a "note" severity and moved all the charset stuff down to that to make progress more clear.
Test Plan:
Trying to make the whole thing blue...
{F205970}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10519
Summary:
Fixes T6084. Changes:
- Rename `phabricator.show-beta-applications` to `phabricator.show-prototypes`, to reinforce that these include early-development applications.
- Migrate the config setting.
- Add an explicit "no support" banner to the config page.
- Rename "Beta" to "Prototype" in the UI.
- Use "bomb" icon instead of "half star" icon.
- Document prototype applications in more detail.
- Explicitly document that we do not support these applications.
Test Plan:
- Ran migration.
- Resolved "obsolete config" issue.
- Viewed config setting.
- Browsed prototypes in Applications app.
- Viewed documentation.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T6084
Differential Revision: https://secure.phabricator.com/D10493
Summary: Ref T1049. This messages is always printed to standard error now that the known hosts file is set to /dev/null. This hides the warning so that we'll be able to parse stderr for Windows hosts (where Powershell decides to output XML...)
Test Plan: Tested locally and verified the warning no longer appears.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D10362
Summary: I derped on this; the SFTP interface doesn't have setWorkingDirectory because it implements DrydockFilesystemInterface and not DrydockCommandInterface. So when you use the Upload File build step, the daemon will crash due to an undefined method.
Test Plan: Tested on my live server.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10351
Summary: Ref T1049. Set the working directory when executing commands on Drydock hosts. Without this set, they execute in the user's default home directory.
Test Plan: Ran a build and saw the correct working directory when running `pwd`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: CanadianBadass, epriestley, Korvin
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D10293
Summary: This has never been enabled by default, and isn't safe. Remove it since people can use preallocated or EC2 hosts.
Test Plan: Removed it; didn't see it appear on the "Create Blueprint" page.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10287
Summary: This prevents SSH from saving the host key into known_hosts; StrictHostKeyChecking only prevents it from prompting for unknown hosts, but it will still verify hosts against what it has previously saved.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10252
Summary:
Resolves T5831. This modifies the Drydock SSH interface to execute commands under Powershell when the target host platform is Windows. Powershell is far more featured than cmd.exe, and more closely resembles a UNIX shell.
Currently Powershell outputs stderr as an XML blob on a line, and while this code currently doesn't use that, it will allow us in the future (planned next week) to redirect that output to the stderr log instead of having it all merged in with stdout under cmd (where there is no way to distinguish it).
Test Plan:
Ran various native commands and PowerShell commands from a Harbormaster build, including things like:
```
Write-Host ("my test" + ${build.id})
```
and saw:
```
my test679
```
in the output.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T5831
Differential Revision: https://secure.phabricator.com/D10248
Summary:
Ref T5861. Currently, mail tags are hard-coded; move them into applications. Each Editor defines its own tags.
This has zero impact on the UI or behavior.
Test Plan:
- Checked/unchecked some options, saved form.
- Swapped back to `master` and saw exactly the same values.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5861
Differential Revision: https://secure.phabricator.com/D10238
Summary: This allows timeouts to be specified on SSH connections that Drydock makes. Used in the EC2 allocator to poll for the SSH server starting.
Test Plan: Used in EC2 allocator diff.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10225
Summary: Instead of implementing the `getCapabilityKey` method in all subclasses of `PhabricatorPolicyCapability`, provide a `final` implementation in the base class which uses reflection. See D9837 and D9985 for similar implementations.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D10039
Summary: Ref T5655. Rename `PhabricatorPHIDType` subclasses for clarity (see discussion in D9839). I'm not too keen on some of the resulting class names, so feel free to suggest alternatives.
Test Plan: Ran unit tests.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin, hach-que
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9986
Summary: Provide an implementation for the `getName` method rather than automagically determining the application name.
Test Plan: Saw reasonable application names in the launcher.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10027
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary: Instead of implementing the `getTypeConstant` method in all subclasses of `PhabricatorPHIDType`, provide a `final` implementation in the base class which uses reflection. See D9837 for a similar implementation.
Test Plan: Ran `arc unit`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9985
Summary: I'm pretty sure that `@group` annotations are useless now... see D9855. Also fixed various other minor issues.
Test Plan: Eye-ball it.
Reviewers: #blessed_reviewers, epriestley, chad
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9859
Summary: Ref T4986. Instead of requiring users to know the name of an application search engine class, let them select from a list.
Test Plan:
Created a new panel.
{F165468}
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9500
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary:
This probably needs some tweaks, but the idea is to make it easier to browse and access applications without necessarily needing them to be on the homepage.
Open to feedback.
Test Plan:
(This screenshot merges "Organization", "Communication" and "Core" into a single "Core" group. We can't actually do this yet because it wrecks the homepage.)
{F160052}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5176
Differential Revision: https://secure.phabricator.com/D9297
Summary: Ref T4986. Allows the Drydock search engines to render as panels.
Test Plan: Viewed affected interfaces in Drydock. Created panels from each engine.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4986
Differential Revision: https://secure.phabricator.com/D9103
