Summary:
Fixes T11490. Currently, this query can not use a key and the table size may be quite large.
Adjust the query so it can use a key for both selection and ordering, and add that key.
Test Plan: Ran `EXPLAIN` on the old query in production, then added the key and ran `EXPLAIN` on the new query. Saw key in use, and "rows" examined drop from 29,273 to 15.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11490
Differential Revision: https://secure.phabricator.com/D16423
Summary: Fixes T11493. This code is a little bit weird/clever, simplify it so that we always cast the handles to an array early on.
Test Plan: {F1767668}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11493
Differential Revision: https://secure.phabricator.com/D16422
Summary: Fixes T11501. Let's you pass in a full PHUIIconView or just the icon name to give ObjectListItem a large icon.
Test Plan: Alamanac, Applications, Drydock, Settings, Search Typeahead, Config page...
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11501
Differential Revision: https://secure.phabricator.com/D16421
Summary:
Ref T11501. This method was removed in D16418, but still has some callsites. I know of four:
- Config
- Settings
- Drydock main page
- Almanac main page
Since I might be missing some and it's close to the release cut, just put the method back for now until we can clean it up more properly.
Test Plan: Viewed Settings, Config, Drydock, Almanac. No more fatal on this method being missing.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11501
Differential Revision: https://secure.phabricator.com/D16420
Summary: I don't think we use footicons, removing that CSS. States were added but only used in Auth, convert them to statusIcon instead.
Test Plan: Visit Auth, UIExamples, grep for `setState`
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16418
Summary: Fixes T11491, I believe these are the only two that need to be specified.
Test Plan: Checked Create pages for diffs, tasks, projects, events, blogs, login, etc. Mobile/Desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11491
Differential Revision: https://secure.phabricator.com/D16416
Summary: Ref T11132, Ref T11478. Builds out a basic PHUICMSView and Guides Application, no content / modules.
Test Plan: Go to /guides/, see blank states for new guides.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132, T11478
Differential Revision: https://secure.phabricator.com/D16414
Summary:
Ref T6996. Depends on D16407. This does the same stuff as D16407, but for `bin/storage renamespace`. In particular:
- Support writing directly to a file (so we can get good errors on failure).
- Support in-process compression.
Also add support for reading out of a `storage dump` subprocess, so we don't have to do a dump-to-disk + renamespace + compress dance and can just stream out of MySQL directly to a compressed file on disk.
This is used in the second stage of instance exports (see T7148).
It would be nice to share more code with `bin/storage dump`, and possibly to just make this a flag for it, although we still do need to do the file-based version when importing (vs exporting). I figured that was better left for another time.
Test Plan:
Ran `bin/storage renamespace --live --output x --from A --to B --compress --overwrite` and similar commands.
Verified that a compressed, renamespaced dump came out of the other end.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6996
Differential Revision: https://secure.phabricator.com/D16410
Summary:
Ref T6996. If you do this kind of thing in the shell, you don't get a good error by default if the `dump` command fails:
```
$ bin/storage dump | gzip > output.sql.gz
```
This can be worked around with some elaborate bash tricks, but they're really clunky and uninintuitive.
We also need to do this in several places (while writing backups; while performing exports), and I don't want to copy clunky bash tricks all over the codebase.
Instead, provide `--output` and `--compress` flags which just do this processing inside `bin/storage dump`. It will fail appropriately if any of the underlying operations fail. This also makes the write a little safer (refuses to overwrite) and the code more reusable.
Test Plan:
- Did three dumps, with no flags, `--output`, and `--output --compress`.
- Verified all three took similar amounts of time and were identical except for "Date Exported" timestamps in comments (except that the compressed one was compressed).
- Used `gunzip` to examine the compressed one, verified it was really compressed.
- Faked a write error, saw properly command behavior (clean up file + exit with error).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6996
Differential Revision: https://secure.phabricator.com/D16407
Summary:
Fixes T11488. I broke this in D16360, I think by doing a little extra refactoring after testing it.
This code is very old, before commits always needed to have repositories attached in order to do policy checks.
Modernize it by mostly just using the repository which is present on the Commit object, and using the existing edge cache.
Test Plan: Ran a commit through the Herald test adapter.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11488
Differential Revision: https://secure.phabricator.com/D16413
Summary: Caught this while linking to it from D16405.
Test Plan: Consulted a dictionary.
Reviewers: chad, alexmv
Reviewed By: alexmv
Differential Revision: https://secure.phabricator.com/D16406
Summary:
Fixes T11487. Improve documentation for three situations:
- When you configure a cluster behind a load balancer, all requests are trusted but not all have an "X-Forwarded-For" header. Change the suggested snippet to read this header only if it exists.
- When a request goes through a series of load balancers (as with a CDN) they can end up writing a list of IPs to the header. Parse these.
- Remove the "rate limiting" stuff -- this got disabled/removed a long time ago and is misleading/incorrect.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11487
Differential Revision: https://secure.phabricator.com/D16403
Summary: Fixes T11484. These mechanisms aren't necessarily obvious and make sense to document here.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11484
Differential Revision: https://secure.phabricator.com/D16404
Summary:
Fixes T11480. This cleans up the error logs a little by quieting three common errors which are really malformed requests:
- The CSRF error happens when bots hit anything which does write checks.
- The "wrong cookie domain" errors happen when bots try to use the `security.alternate-file-domain` to browse stuff like `/auth/start/`.
- The "no phcid" errors happen when bots try to go through the login flow.
All of these are clearly communicated to human users, commonly encountered by bots, and not useful to log.
I collapsed the `CSRFException` type into a standard malformed request exception, since nothing catches it and I can't really come up with a reason why anything would ever care.
Test Plan:
Hit each error through some level of `curl -H ...` and/or fakery. Verified that they showed to users before/after, but no longer log.
Hit some other real errors, verified that they log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11480
Differential Revision: https://secure.phabricator.com/D16402
Summary: This needs an `isset()` for cases when authority and packages don't completely overlap.
Test Plan:
- With a package set to trigger autoreview, created a revision.
- Observed error log, saw no more error.
- Saw package trigger autoreview properly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16398
Summary:
Fixes T11468. I was able to find //a// reproduction case for the issue, at least, described in my comments there.
When the server sends back position information for columns we aren't displaying, for whatever reason, just ignore that information.
Future work in T4900 to do more synchronization may revisit this.
Test Plan: See T11468#190177 for steps. Did that stuff with this patch, got a clean edit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11468
Differential Revision: https://secure.phabricator.com/D16397
Summary:
Ref T11473. If you write a method like `get_stuff(ids)` and then call it with an empty list of IDs, you can end up passing an empty constraint to Conduit.
If you run a `*.search` method with such a constraint, like this one:
```
{
"ids": []
}
```
...we have three possible beahviors:
# Treat it like the user passed no constraint (basically, ignore the constraint).
# Respect the constraint (return no results).
# Error.
Currently, we do (1). However, this is pretty confusing and I think clearly the worst option, since it means `get_stuff(array())` in client code will often tend to return a ton of results.
We could do (2) instead, but this is also sort of confusing (it may not be obvious why nothing matched, even though it's an application bug) and I think most reasonable client code should be doing an `if ($ids)` test: this test makes clients a little more complicated, but they can save a network call, and I think they often need to do this test anyway (for example, to show the user a different message).
This implements (3), and just considers these to be errors: this is the least tricky behavior, it's consistent with what we do in PHP, makes fairly good sense, and the only cost for this is that client code may need to be slightly more complex, but this slightly more complex code is usually better code.
Test Plan: Ran Conduit `*.search` queries with `"ids":[]` and `"phids":[]`, got sensible errors instead of runaway result sets.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11473
Differential Revision: https://secure.phabricator.com/D16396
Summary:
Ref T11473. When running `harbormaster.build.search` with a `buildables` constraint, the constraint doesn't get passed to the Query and so currently has no effect.
This piece of logic was just accidentally omitted from D16356. It is probably not used anywhere today and doesn't show up in the UI, so it's easy to overlook (I missed it in review, too).
Test Plan: Ran `harbormaster.build.search` with a `buildables` constraint, got expected filtering.
Reviewers: yelirekim, chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11473
Differential Revision: https://secure.phabricator.com/D16395
Summary: Fixes T11457, I guess. It feels wierd when you drag it a bit, and Im not positive if it's the calc css or javascript.
Test Plan: Enable filetree, shorten browser, see scrolling appear if files too long.
Reviewers: avivey, epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11457
Differential Revision: https://secure.phabricator.com/D16393
Summary:
When I wrote this the first time, only hosted repositories could be clustered.
This check wasn't removed when I allowed observed repositories to be clustered in D15986.
Test Plan:
Reloaded {nav Config > Repository Servers} page, saw more stuff locally.
Reviewed the cardinal digits between 1 and 17, inclusive.
Reviewers: chad, avivey
Reviewed By: avivey
Differential Revision: https://secure.phabricator.com/D16392
Summary:
The cluster synchronization code runs either actively (before returning a response to `git clone`, for example) or passively (routinely, as the daemons update reposiories).
The active sync runs as the web user (if running `git clone http://...`) or the VCS user (if running `git clone ssh://...`). But the passive sync runs as the daemon user.
All of these sync processes need to run actual commands as the daemon user (`git fetch ...`).
For the active ones, we must `sudo`.
For the passive ones, we're already the right user. We run the same code, and end up trying to sudo to ourselves, which `sudo` isn't happy about by default.
Depending on how `sudo` is configured and which users things are running as this might work anyway, but it's silly and if it doesn't work it requires you to go make non-obvious, weird config changes that are unintuitive and somewhat nonsensical. This is probably worse on the balance than adding a bit of complexity to the code.
Instead, test which user we're running as. If it's already the right user, don't sudo.
Test Plan:
- Ran `bin/repository update --trace` as daemon user, saw no more `sudo`.
- Ran a `git clone` to make sure that didn't break.
Reviewers: chad, avivey
Reviewed By: avivey
Differential Revision: https://secure.phabricator.com/D16391
Summary:
I converted this call incorrectly in D16092. We should pass the `PhutilURI` object, not the string version of it.
Specifically, this resulted in hitting an error like this if a replica needed synchronization:
```
[2016-08-11 21:22:37] EXCEPTION: (InvalidArgumentException) Argument 1 passed to DiffusionCommandEngine::setURI() must be an instance of PhutilURI, string given, called in...
#0 PhutilErrorHandler::handleError(integer, string, string, integer, array) called at [<phabricator>/src/applications/diffusion/protocol/DiffusionCommandEngine.php:52]
#1 DiffusionCommandEngine::setURI(string) called at [<phabricator>/src/applications/diffusion/protocol/DiffusionRepositoryClusterEngine.php:601]
...
```
Test Plan: Clusterized an observed repository, demoted a node, ran `bin/repository update Rxxx` to update, saw no typehint fatal.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16390
Summary:
Ref T11458. Depends on D16388. Currently, we're very aggressive about closing connections in the taskmaster daemons.
This can end up taking up a lot of resources. In particular, because the outgoing port for outbound connections normally can not be reused for 60 seconds after a connection closes, we may exhaust outbound ports on the host if there's a big queue full of stuff that's being processed very quickly.
At a minimum, we //always// are holding open a `worker` connection, which we always need again right away. So even in the best case we end up opening/closing this about once per second and each daemon takes up about ~60 outbound ports when it should take up ~1.
So, make two adjustments:
- First, only close connections which we haven't issued a query on in the last 60 seconds. This should prevent us from closing connections that we'll need again immediately in most cases. In the worst case, we shouldn't be eating up any extra ports under default TCP behavior.
- Second, explicitly close connections. We were relying on implicit/GC behavior (maybe as a holdover from very long ago, before we got connection wrappers in place?), which probably did about the same thing but isn't as predictable and can't be profiled or instrumented.
Test Plan:
This is somewhat difficult to test completely convincingly in isolation since the problem behavior depends on production scales and the workload, and to some degree on configuration.
I tested that this stuff baiscally works by adding logging to connect/close and running the daemons, verifying that they churned connections a lot before this change (e.g., ~1/s even at no load) and churn rarely afterward (e.g., almost never at no load).
I ran some workload through them to make sure I didn't completely break anything.
The best real test is just seeing how production responds. Current inbound/outbound connections on `secure001` are 1,200:
```
secure001 $ netstat -t | grep :mysql | wc -l
1164
```
Current outbound from `repo001` are 18,600:
```
repo001 $ netstat -t | grep :mysql | wc -l
18663
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11458
Differential Revision: https://secure.phabricator.com/D16389
Summary:
Fixes T11446. We can raise the misleading error:
> No valid databases are configured!
...when a valid master is configured but unreachable.
Instead, more carefully raise either "nothing is configured" or "nothing is reachable".
Test Plan: Configured only a master, artificially severed it, got "nothing is reachable" instead of "nothing is configured".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11446
Differential Revision: https://secure.phabricator.com/D16386
Summary:
Fixes T11453. Currently, commit message summaries are limited to 80 bytes. This may only be 20-40 characters for CJK languages or langauges with Cyrillic script.
Increase storage size to 255, then truncate to the shorter of 255 bytes or 80 glyphs. This preserves the same behavior for latin languages, but is less tight for Russian, etc.
Some minor additional changes:
- Provide a way to ask "how much data fits in this column?" so we don't have to duplicate column lengths across summary checks or UI errors like "title too long".
- Remove the `text80` datatype, since no other columns use it and we have no use cases (or likely use cases) for it.
Test Plan:
- Made a commit with a Cyrillic title, saw reasonable summarization in UI:
{F1757522}
- Added and ran unit tests.
- Grepped for removed `SUMMARY_MAX_LENGTH` constant.
- Grepped for removed `text80` data type.
Reviewers: avivey, chad
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T11453
Differential Revision: https://secure.phabricator.com/D16385
Summary: Ref T11428. This documentation was a bit misleading and out of date. Update it to reflect modern reality.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11428
Differential Revision: https://secure.phabricator.com/D16384
Summary: Fixes T9410. Depends on D16382. Since all users can now view all Herald rules, we can link them in the transcripts.
Test Plan: Viewed a transcript, clicked rule names, reviewed rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9410
Differential Revision: https://secure.phabricator.com/D16383
Summary:
Ref T9410. This changes the view policy for all Herald rules to the most public policy ("All Users" for private installs, "Public" for public installs).
See T11428 for discussion of this change in greater detail. In practice, this is //approximately// how things work today anyway, since you can almost always see almost all of this information in transcripts.
I believe this narrower view policy is helpful in zero cases and slightly confusing or harmful in a number of reasonable cases.
Test Plan: Viewed personal, object and global rules as users who could and could not edit the rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9410
Differential Revision: https://secure.phabricator.com/D16382
Summary: When using spaces in the logo header, nowrap the text so it properly displays when too long on mobile, tablet.
Test Plan: Snowmen
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16380
Summary: Converts final call site to PHUIDocumentViewPro.
Test Plan: grep for PHUIDocumentView, view new Welcome Page
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16379
Summary: Fixes T11437. Provides a normal form for configuring this, instead of weird "look up the PHID and adjust things in the database" stuff.
Test Plan:
{F1753651}
{F1753652}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11437
Differential Revision: https://secure.phabricator.com/D16377
Summary:
This updates the eye logo and removes the formal wordmark "Phabricator" as an image. Instead we'll use the new updated eye logo and plain text for "Phabricator", both of which are more friendly and less industrial.
Installs that already use the `header-logo` customization setting will need to rebuild their logo to 80px x 80px. They will then also get to use plain text to whitebox their install as they see fit.
Test Plan:
Tested new logo at desktop, tablet, and mobile sizes. Set a random instance name, saw new wordmark. Created a really long wordmark of MMMMMMMMMMMM, saw text cut off so UI doesn't break. May need some additional tweaking, but I think we covered the most edge cases here.
{F1751791, size=full}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: edibiase, bjshively, yelirekim, Korvin
Maniphest Tasks: T4214, T11096
Differential Revision: https://secure.phabricator.com/D16373
Summary: Fixes T7939. This doesn't get too fancy, but allows you to write Herald rules against Calendar events.
Test Plan:
- Wrote an "add red flag to events with party in the name" rule.
- Created a "mundane meeting", didn't get flagged.
- Created a "cool party", got flagged.
- Ran rules from the Herald test console.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7939
Differential Revision: https://secure.phabricator.com/D16368
Summary: I find this fact very useful for understanding my feline companion
Test Plan: Added "Motivator: Cat Facts" to the project, nothing broke
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16374
Summary: Makes sidenav disappear again on projects/profiles, but shows it on home again (tablet views).
Test Plan: Visit Profile/Projects/Home on mobile, desktop, and tablet. See nav disappear correctly.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16369
Summary: Fixes T11420. These are selected in newest-to-oldest order from the database, but we should show them in oldest-to-newest order in the UI.
Test Plan:
Tagged a couple tasks with "A, B, C" projects, saw correct order in UI:
{F1749351}
{F1749352}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11420
Differential Revision: https://secure.phabricator.com/D16367
Summary:
Fixes T9719. Currently, the Herald "Test Console" has a big `instanceof` thing, so new adapters (like a Calendar adapter, or third-party adapters) aren't available automatically. Instead, do a standard modular thing: load the available adapters, ask which ones can test the object the user selected, then let the user pick which one they want to move forward with.
Additionally, it isn't very clear that you can't test "commit hook" rules because they rely on push state which we don't really have a good way to simulate. When the user picks a commit, we now show them the "Hook" events, but the options are disabled and explain why they can not be selected.
Test Plan:
- Ran test rules for revisions, commits, mocks, tasks, wiki documents, questions, and outbound mail.
- Plugged in a commit, got a more-helpful choice screen explaining why you do a test run of hook rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9719
Differential Revision: https://secure.phabricator.com/D16360
Summary:
If contributors use "history.immutable" by default (for example, in user/global config) and then try to contribute to Phabricator, they might land in a way that creates merge commits, which we'd prefer to avoid.
To make this a bit harder to do unintentionally, set "history.immutable" to "false" explicitly in `.arcconfig`. This will override any user or system setting and keep `land` in squash mode in this project.
This might also be a problem in general, and maybe in the long term we need something like one of these warnings:
> (when arc landing) You haven't landed changes to this project before, are you sure you want to create a merge commit / are you sure you want to squash?
...or:
> (when doing anything) This project doesn't have a history.immutable setting; you should probably set one so user settings don't win out.
...or just not let this be set at the user/system level, although that's annoying in some cases. Also maybe this:
> (when arc landing) You're about to create a merge commit, but the last Differential change in history squashed instead. Merge anyway?
However, we haven't seen this as a widespread issue outside of this project yet (and even in this project I think it has only happened 2-3 times), so just put up a guard rail in our own configuration for now.
Test Plan:
- Ran `arc set-config history.immutable true` to set the flag in my user settings.
- Ran `arc get-config` to verify that the setting overrode system/user settings:
```
epriestley@orbital ~/dev/phabricator $ arc get-config history.immutable --verbose
history.immutable
If true, arc will never change repository history (e.g., through amending
or rebasing). Defaults to true in Mercurial and false in Git. This
setting has no effect in Subversion.
Example Value: false
Current Value: false
Current Source: project
local Value: -
project Value: false
user Value: true
system Value: -
default Value: -
```
Reviewers: chad, fooishbar
Reviewed By: fooishbar
Differential Revision: https://secure.phabricator.com/D16364
Summary:
phpexcel.net currently serves a 500 page, and the top Google hit for
PHPExcel (on codeplex) gives you a site warning you that it is 3 years
out of date, and to see GitHub instead.
Update the link from Maniphest's 'please install PHPExcel to enable
export' prompt.
Test Plan:
- Click 'Export to Excel' from Maniphest query result page without PHPExcel installed
- Follow suggested link to install it
- See code rather than a HTTP 500 error
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16363
phpexcel.net currently serves a 500 page, and the top Google hit for
PHPExcel (on codeplex) gives you a site warning you that it is 3 years
out of date, and to see GitHub instead.
Update the link from Maniphest's 'please install PHPExcel to enable
export' prompt.
Summary: Fixes T11416. Unclear what the side-effects of this would be, so bark if you find something. Previously, we'd have to overflow and scroll, which is kind of a pain since you're hiding content on long code blocks. This just wraps long lines, and preserves line breaks globally.
Test Plan: Test feed, profile, comments, inline comments, triple backticks.
Reviewers: avivey, epriestley
Reviewed By: avivey, epriestley
Subscribers: Korvin
Maniphest Tasks: T11416
Differential Revision: https://secure.phabricator.com/D16361
Summary: Adds a class for explicitly hiding the sidenav.
Test Plan: Set Config to Enable Filetree. View a diff, see tree. Press `f`, see it go away. Reload page, see persistence.
Reviewers: avivey, epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16359
Summary: This moves aphront-side-nav to use same table css display as profile nav. Slightly less code to support. Cleans up AppSearch UI, think I've gotten all the edge cases here, but bang on it, can hold until after release cut.
Test Plan: Config, Maniphest, Differential, Diffusion, Home.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16346
Summary: Fixes T11409. This syntax isn't compatible with older PHP.
Test Plan: Ran `arc lint` on the file.
Reviewers: yelirekim, chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11409
Differential Revision: https://secure.phabricator.com/D16358
Summary: We deprecate the existing API method used to access build information from the API, but preserve its response structure after calling through to the new method. I've cordoned off the fields I needed to define in order to meet the output structure by putting those fields in a search attachment.
Test Plan:
Used the API console and looked at the list view controller for builds.
Old output structure:
```lang=json
{
"data": [
{
"id": "16823",
"phid": "PHID-HMBD-xghrwfz6luoye5rgc2hq",
"uri": "https://secure.phabricator.com/harbormaster/build/16823/",
"name": "Run Core Tests",
"buildablePHID": "PHID-HMBB-s6ykzm2jzxz4ymduztq3",
"buildPlanPHID": "PHID-HMCP-pcfxcgyoif67l3buc4zt",
"buildStatus": "passed",
"buildStatusName": "Passed"
}
],
"cursor": {
"limit": 100,
"after": "16823",
"before": null
}
}
```
New output structure:
```lang=json
{
"data": [
{
"id": 1,
"type": "HMBD",
"phid": "PHID-HMBD-qpgcmv67tzaauzayzit5",
"uri": "http://ec2-54-165-244-168.compute-1.amazonaws.com/harbormaster/build/1/",
"name": "arc lint + arc unit",
"buildStatusName": "Passed",
"buildablePHID": "PHID-HMBB-qdefith5uakkepqpjr2g",
"buildPlanPHID": "PHID-HMCP-zswbhazb7ipmaf4plygg",
"buildStatus": "passed",
"initiatorPHID": "PHID-USER-rihx4366f3aczsvc2wtb",
"dateCreated": 1450295643,
"dateModified": 1450295644,
"policy": {
"view": "users",
"edit": "users"
}
}
],
"maps": {},
"query": {
"queryKey": null
},
"cursor": {
"limit": 100,
"after": null,
"before": null,
"order": null
}
}
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16356
