Summary:
Sometimes a commit can be huge (like a branch cut in FB www which could have more than half a million files touched). It will generate some emails with size more than 30M, and it will take quite a while to just sort the files and to send out.
Put a hard limit here to avoid such cases. Probably only matters for FB right now, but still even for a small repo with several thousand files, it is a waste to send them all out. Not sure if there is any cleaner way to do it though.
Test Plan: Tried it in FB installtion.
Reviewers: lifeihuang, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8889
Summary:
A number of interfaces could use a more consice looking ObjectItemList for showing pass/fail/warn states.
- Added a new "State" for PHUIObjectItemListView
- Updated UIExamples
- Implemented in Herald (next Harmormaster)
Test Plan: UIExamples / Herald, desktop and mobile
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8893
Summary: 'cuz those can be complicated. Fixes T4738. I needed to do a fair amount of heavy lifting to get the policy stuff rendering correctly. For now, I made this end point very one purpose and tried to make that clear.
Test Plan: looked at some custom policies. see screenshots.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4738
Differential Revision: https://secure.phabricator.com/D8890
Summary: Turns a Property List into a stacked view like on tablet/mobile. Useful for where text is longer.
Test Plan:
Test a Herald Transcript page
{F148438}
{F148439}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8891
Summary: Added .phabricator-remarkup-embed-image to full size images as well
Test Plan: Add an image e.g. `{F123, size=full}` and verify that it has a shadow and the space next to it isn't clickable
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, epriestley, Korvin
Maniphest Tasks: T4902
Differential Revision: https://secure.phabricator.com/D8858
Summary:
Use initializeNewLog rather than instantiate the UserLog,
Closes T4912
Test Plan: Run install-certificate
Reviewers: #blessed_reviewers, btrahan
Reviewed By: #blessed_reviewers, btrahan
Subscribers: epriestley
Maniphest Tasks: T4912
Differential Revision: https://secure.phabricator.com/D8887
Summary:
Ref T4398. Allows auth factors to render and validate when prompted to take a hi-sec action.
This has a whole lot of rough edges still (see D8875) but does fundamentally work correctly.
Test Plan:
- Added two different TOTP factors to my account for EXTRA SECURITY.
- Took hisec actions with no auth factors, and with attached auth factors.
- Hit all the error/failure states of the hisec entry process.
- Verified hisec failures appear in activity logs.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8886
Summary: See <http://fab.wmflabs.org/T226>. The summary for this option is confusing, because "true" means sticky but the wording implies "true" means non-sticky.
Test Plan:
- Looked at the option in summary view.
- Reviewed related text, none of the other copy here seems confusing or ambiugous to me.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: qgil, epriestley
Differential Revision: https://secure.phabricator.com/D8884
Summary:
Ref T4398. This is still pretty rough and isn't exposed in the UI yet, but basically works. Some missing features / areas for improvement:
- Rate limiting attempts (see TODO).
- Marking tokens used after they're used once (see TODO), maybe. I can't think of ways an attacker could capture a token without also capturing a session, offhand.
- Actually turning this on (see TODO).
- This workflow is pretty wordy. It would be nice to calm it down a bit.
- But also add more help/context to help users figure out what's going on here, I think it's not very obvious if you don't already know what "TOTP" is.
- Add admin tool to strip auth factors off an account ("Help, I lost my phone and can't log in!").
- Add admin tool to show users who don't have multi-factor auth? (so you can pester them)
- Generate QR codes to make the transfer process easier (they're fairly complicated).
- Make the "entering hi-sec" workflow actually check for auth factors and use them correctly.
- Turn this on so users can use it.
- Adding SMS as an option would be nice eventually.
- Adding "password" as an option, maybe? TOTP feels fairly good to me.
I'll post a couple of screens...
Test Plan:
- Added TOTP token with Google Authenticator.
- Added TOTP token with Authy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8875
Summary: Ref T4715. We show this number on the homepage, provide an easy way to query matching commits.
Test Plan: Clicked "problem commits", saw them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4715
Differential Revision: https://secure.phabricator.com/D8880
Summary:
Fixes T4911. See D8879. This gives us the correct query in cases where there are no audits.
This doesn't try to do the GROUP BY stuff yet.
Test Plan:
- Viewed a commit in Diffusion with no audits, got a commit detail page.
- Viewed "All Commits" in web UI, saw commits without any audits included in the list.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4911
Differential Revision: https://secure.phabricator.com/D8882
Summary:
Grab an audit we have authority over if possible, relying on how that's sorted by actor first. This gets us the best description possible of what the audit is about in the list. Also sort out highlighting; right now it looks silly on some views when everything is highlighted.
An open question in the diff - when to highlight audits?
Options I see -
- never
- don't do it on "needs attention" but other views
- calculate what percentage of shown audits user has authority over, if most ( > N% ) don't highlight, otherwise highlight
- something else
- some combo of the above
Test Plan: lists of audits looked better
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8876
Summary:
Ref T4398. This adds a settings panel for account activity so users can review activity on their own account. Some goals are:
- Make it easier for us to develop and support auth and credential information, see T4398. This is the primary driver.
- Make it easier for users to understand and review auth and credential information (see T4842 for an example -- this isn't there yet, but builds toward it).
- Improve user confidence in security by making logging more apparent and accessible.
Minor corresponding changes:
- Entering and exiting hisec mode is now logged.
- This, sessions, and OAuth authorizations have moved to a new "Sessions and Logs" area, since "Authentication" was getting huge.
Test Plan:
- Viewed new panel.
- Viewed old UI.
- Entered/exited hisec and got prompted.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8871
Summary:
Ref T4398. Ref T4842. I want to let users review their own account activity, partly as a general security measure and partly to make some of the multi-factor stuff easier to build and debug.
To support this, implement modern policies and application search.
I also removed the "old" and "new" columns from this output, since they had limited utility and revealed email addresses to administrators for some actions. We don't let administrators access email addresses from other UIs, and the value of doing so here seems very small.
Test Plan: Used interface to issue a bunch of queries against user logs, got reasonable/expected results.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: keir, epriestley
Maniphest Tasks: T4842, T4398
Differential Revision: https://secure.phabricator.com/D8856
Summary:
Ref T4398. This is roughly a "sudo" mode, like GitHub has for accessing SSH keys, or Facebook has for managing credit cards. GitHub actually calls theirs "sudo" mode, but I think that's too technical for big parts of our audience. I've gone with "high security mode".
This doesn't actually get exposed in the UI yet (and we don't have any meaningful auth factors to prompt the user for) but the workflow works overall. I'll go through it in a comment, since I need to arrange some screenshots.
Test Plan: See guided walkthrough.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4398
Differential Revision: https://secure.phabricator.com/D8851
Summary: Removes many tables and uses PropertyLists and ObjectItemList when possible. Adds cleaner CSS, makes mobile editing more possible.
Test Plan: Test new UI on desktop and mobile. Verify all functionality still exists.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4272
Differential Revision: https://secure.phabricator.com/D8860
Summary: ...also kills off "PhabricatorAuditCommitQuery" and "PhabricatorAuditQuery", by moving the work to "DiffusionCommitQuery". Generally cleans up some code around the joint on this too. Also provides policies for audit requests, which is basically the policy for the underlying commit. Fixes T4715. (For the TODO I added about files, I just grabbed T4713.)
Test Plan:
Audit: verified the three default views all showed the correct things, including highligthing. did some custom queries and got the correct results.
Diffusion: verified "blame view" still worked. verified paths were highlighted for packages i owned.
Home: verified audit boxes showed up with proper commits w/ audits
bin/audit: played around with it via --dry-run and got the right audits back
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: chad, epriestley, Korvin
Maniphest Tasks: T4715
Differential Revision: https://secure.phabricator.com/D8805
Summary:
When showing contents of a file with the blame mode enabled, tooltips pops out
when the mouse hovers over previous commit linkes on left side. The last part of the
tooltips is the author's name. If an author is unregistered, the name becomes
<span>name</span>.
{F147724}
This doesn't happen if the author is registered.
Test Plan:
Check tooltips after making the change.
{F147725}
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8869
Summary:
This algorithm is tricky, and uses `phutil_safe_html()` directly, which makes it potentially unsafe.
In particular, D8859 fixes a bug with it which caused it to produce non-utf8 output. This doesn't guarantee it's a security problem, but does make it suspicious.
I don't actually see a way to break it, but rewrite it so that it's absolutely bulletproof and does not need to call `phutil_safe_html()`.
Test Plan:
{F147487}
@rugabarbo, if you have a chance, can you check if this still works for you?
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, rugabarbo
Differential Revision: https://secure.phabricator.com/D8862
Summary: Fixes T4899. Action strengths got lost somewhere along the way; actions like "Accepted" should be stronger than "Changed Subscribers".
Test Plan: Verified things sort as expected now, with major actions at the top.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4899
Differential Revision: https://secure.phabricator.com/D8857
Summary: Fixes T4903. At some point maybe-soonish we should maybe go make `"device" => true` the default, and put `"device" => "hella-busted"` on the remaining bad pages.
Test Plan: L@@K @ W/ iOS Simulator
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley, k
Maniphest Tasks: T4903
Differential Revision: https://secure.phabricator.com/D8863
Summary:
I created this review to get an answer...
It should not be taken as a real fix.
I noticed that phabricator return corrupted search results for some russian queries (without this patch).
See screenshot:
{F147443}
But I can't reproduce this bug on https://secure.phabricator.com/
This search query causes problems only for my phabricator instance.
More than that, I didn't find any php.ini-settings that can resolve this problem.
It's look like your phabricator instance use /u-modifier by default.
But how is it possible?
Test Plan: NONE
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8859
Summary: Fixes T4878
Test Plan:
1. Go to paste
2. Add comment
3. Check that paste subsribers got paste link by email
See T4878 for more details.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T4878
Differential Revision: https://secure.phabricator.com/D8861
Summary: Some actions (notably, `!accept`) require more information than we currently load.
Test Plan: Piped in some `!accept` mail using `bin/mail receive-test`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8844
Summary: Fixes T3566 List of poll actions should include ability to close an open poll or reopen a closed poll.
Test Plan: Poll author should be able to close/reopen poll. Non-author should get policy screen when attempting to close/reopen poll.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T3566
Differential Revision: https://secure.phabricator.com/D8846
Summary: See IRC. We construct this a little bit wrong if there are multiple "open" statuses. Use a more modern construction.
Test Plan: Hit `?statuses=wontfix,invalid`, etc. Clicked "view all" from projects.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8854
Summary: Fixes T4606. Also shortens two unusual type names which are currently inconsistent.
Test Plan: Expanded advanced search.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4606
Differential Revision: https://secure.phabricator.com/D8853
Summary:
In some applications, using `{V2}` syntax to embed a vote throws. The chain of causality looks like this:
- We try to render a `phabricator_form()`.
- This requires a CSRF token.
- We look for a CSRF token on the user.
- It's an omnipotent user with no token, so everything fails.
To resolve this, make sure we always pass the real user in.
Test Plan:
- Lots of `grep`.
- Made a Differential comment with `{V2}`.
- Made a Diffusion comment with `{V2}`.
- Made a Maniphest comment with `{V2}`.
- Replied to a Conpherence thread with `{V2}`.
- Created a Conpherence thread with `{V2}`.
- Used Conduit to update a Conpherence thread with `{V2}`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, lkassianik
Differential Revision: https://secure.phabricator.com/D8849
Summary:
If you create a diff with no hunks (e.g., it adds a single empty file), we never attachHunks() so we throw on getHunks().
Instead, make sure changesets get hunks attached if they expect it.
Test Plan: Created a new diff with a single empty file in it.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: zeeg, epriestley
Differential Revision: https://secure.phabricator.com/D8842
Summary: These are a little easier on the eyes.
Test Plan:
Reject an epriestley diff.
{F146851}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8841
Summary:
Ref T4866. I did a fancy version of this but it looks pretty bad/confusing so here's a simple version.
Fancy-but-whack version:
{F146847}
Test Plan: This version is like that, but just always uses `fa-user`.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4866
Differential Revision: https://secure.phabricator.com/D8840
Summary: center aligns the icons in the fill area, removes some of the positioning jank. Also set new icons for maniphest custom.
Test Plan: test desktop and mobile layouts, tested thin pins for proper centering.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4866
Differential Revision: https://secure.phabricator.com/D8839
Summary: Throwing this up for testing, swapped out all icons in timeline for their font equivelants. Used better icons where I could as well. We should feel free to use more / be fun with the icons when possible since there is no penalty anymore.
Test Plan: I browsed many, not all, timelines in my sandbox and in IE8. Some of these were just swagged, but I'm expecting we'll do more SB testing before landing.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8827
Summary: For the time being, no need to have these in the repository.
Test Plan: Reload UIExamples, only see FontAwesome
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8835
Summary: The token transactions can publish empty transaction feed stories.
Stop them from doing that, and make notifications fail more quietly.
Auditors: btrahan
Summary:
- Support file attachments in Mailgun, after D8831.
- Fix `bin/mail send-test --attach ...` flag.
- Make `bin/mail send-test` route mail through the daemons.
- Remove the `workerTaskID` on MetaMTAMail, which is only used (needlessly) by `bin/mail resend` and creates a huge mess elsewhere.
- Currently, when mail fails, the daemon exits with a very generic and useless message. Instead, make `sendNow()` throw when it fails, so the real reason is surfaced. This is OK now because mail is always sent via the daemons.
- Now that Mailgun supports attachments, document it.
- Update a bunch of mail docs.
Test Plan:
- Sent mail.
- Sent mail with attachments.
- Read documentation.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8832
Summary: Fixes T4833. I wish there was an elegant way to catch this exception but I think the stack is written such that we really should just do this one-off query here...
Test Plan: from the "create project" link under "edit task" I received a more detailed exception than the report in T4833 post patch. I also tested editing an existing project - yay - and editing an existing project to some other existing project's name - got a nice error dialogue.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4833
Differential Revision: https://secure.phabricator.com/D8834
Summary:
Ref T4830. A few methods, like `conduit.ping`, are callable without authentication, so this even has some use cases. Also:
- Make some Differential stuff a little more consistent.
- Use slightly more modern rendering.
- Deprecate the status-oriented `user` calls; these will be replaced by Calendar methods.
Test Plan: Browsed console as logged out / logged in users.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4830
Differential Revision: https://secure.phabricator.com/D8826
Summary:
Ref T4830.
- If the application policy is public, allow logged-out users to browse examples.
- Use standard elements instead of custom ones.
Test Plan: Browsed UIExamples.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4830
Differential Revision: https://secure.phabricator.com/D8825
Summary:
Ref T3551. Currently, there are many layers of indirection between pull requests and revisions. After D8822, revisions and other types of requested objects are recorded directly on the request. This allows us to simplify data access and querying.
A lot of stuff here is doing `instanceof` checks to keep APIs stable, but most of those can go away in the long run.
Test Plan:
- Browsed requests.
- Verified revision-dependent fields (like "Revision", "Size", "Churn") still render correctly.
- Called `releeph.queryrequests`.
- Called `releephwork.nextrequest`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3551
Differential Revision: https://secure.phabricator.com/D8824
Summary:
Ref T3662. Releeph blocks users from requsting unparsed commits, but there's no real technical reason for this.
The `releephwork.getorigcommitmessage` method assumes data exists, but should be replaced with `diffusion.querycommits` anyway.
Test Plan: Ran `diffusion.querycommits`. Requested a commit.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3662
Differential Revision: https://secure.phabricator.com/D8823
Summary:
Ref T3551. Currently, ReleephRequests don't have a direct concept of the //object// being requested. You can request `D123`, but that is just a convenient way to write `rXyyyy`.
When the UI wants to display information about a revision, it deduces it by examining the commit.
This is primarily an attack on T3551, so we don't need to load <commit -> edge -> revision> (in an ad-hoc way) to get revisions. Instead, when you request a revision we keep track of it and can load it directly later.
Later, this will let us do more things: for example, if you request a branch, we can automatically update the commits (as GitHub does), etc. (Repository branches will need PHIDs first, of course.)
This adds and populates the column but doesn't use it yet. The second part of the migration could safely be run while Phabricator is up, although even for Facebook this table is probably quite small.
Test Plan:
- Ran migration.
- Verified existing requests associated sensibly.
- Created a new commit request.
- Created a new revision request.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3551
Differential Revision: https://secure.phabricator.com/D8822
Summary: Ref T3551. Repository is guaranteed if a product is loaded with modern mechanisms.
Test Plan:
- Edited a request.
- Called `releephwork.getbranchcommitmessage`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3551
Differential Revision: https://secure.phabricator.com/D8821
Summary: Ref T3551. Ref T3549. Mostly unnecessary with modern calls.
Test Plan:
- Called `releeph.queryrequests`.
- Called `releeph.request`.
- Called `releephwork.getbranchcommitmessage`.
- Called `releephwork.getcommitmessage`.
- Called `releephwork.nextrequest`.
- Viewed and edited branches and requests.
- Made a comment on a request.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3549, T3551
Differential Revision: https://secure.phabricator.com/D8820
Summary:
Ref T3551. Releeph does a bunch of old-school on-object data loading; start cleaning that up.
This doesn't change anything, just makes the code more modern/consistent.
Test Plan: Edited a request; called `releephwork.nextrequest`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3551
Differential Revision: https://secure.phabricator.com/D8819
Summary:
Ref T3662. Ref T3549. These methods are pretty conservative for now, but get the structure in place.
Also do a bunch more project -> product stuff.
Test Plan: Made calls to both methods, browsed around the UI a fair amount.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3549, T3662
Differential Revision: https://secure.phabricator.com/D8816
Summary:
This adds FontAwesome and attempts to make use as icons as consistent as possible. May require additional tweaks once we start using, but in practice this is pretty finished.
- Adds FontAwesome
- Adds additional transforms (rotates, spins)
- Adds additional colors
- Better scopes halflings and fontawesome
- Shares CSS between fonts for consistency
Test Plan:
Tested various browsers back to IE8, mobile.
{F146146}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8818
Summary: Ref T3718. Move from unbatched / ad-hoc loading to standard stuff for handles.
Test Plan: Looked at some requests and saw no changes.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3718
Differential Revision: https://secure.phabricator.com/D8810
Summary: This `%d` should be a `%s`, since the `PhutilNumber` value may get formatted according to locale settings.
Test Plan: will make @zeeg
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, zeeg
Differential Revision: https://secure.phabricator.com/D8814
Summary:
Ref T1049. When Harbormaster tests pass, don't bother sending an email about it.
(I tried to implement this earlier but didn't test it entirely properly, and we needed a little more code.)
Test Plan: Used `bin/harbormaster build` to build some junk, got no email about passes.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D8813
Summary: A small but appreciable number of users find flavor on buttons confusing. Remove this flavor. This retains flavor in headers, error messages, etc., which doesn't cause confusion.
Test Plan: Looked at a revision, task, paste, macro, etc.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8812
Summary:
Ref T3718. Ref T3644. Ref T3092. Switches from the Releeph UI elements to standard ones. I'll attach some screenshots.
Also fixes CSRF against the request action endpoint.
Test Plan:
- Viewed request details.
- Took actions on a request from detail page.
- Viewed request list.
- Took actions on a request from list page.
- Used keyboard shortcuts to navigate list.
- Used keyboard shortcuts to take actions.
- Simulated errors.
- Viewed on devices.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: grp, FacebookPOC, mattlqx, tala, beng, LegNeato, epriestley
Maniphest Tasks: T3718, T3092, T3644
Differential Revision: https://secure.phabricator.com/D8771
Summary: This adds in the Glyphicons Halflings Font/Iconset as an option for PHUIIconView along with a standard set of 10 colors. This will be a replacement for the standard action icon set in upcoming diffs, as well as obviously give us more flexibility, less KB, and less design resource time managing images.
Test Plan: UIExamples, Diviner
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8798
Summary:
Fixes T4810. When a buildable completes, make an effort to update the corresponding object with a success or failure message. Commits don't support this yet, but revisions do.
{F144614}
Test Plan:
- Used `bin/harbormaster build` and `bin/harbormaster update` to run a pile of builds.
- Tried good/bad builds.
- Sent some normal mail to make sure the mail reentrancy change didn't break stuff.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4810
Differential Revision: https://secure.phabricator.com/D8803
Summary:
Ref T4810. Ultimate goal is to let Harbormaster post a "build passed/failed" transaction. To prepare for that, implement `PhabricatorApplicationTransactionInterface` in Differential.
To allow Harbormaster to take action on //diffs// but have the transactions apply to //revisions//, I added a new method so that objects can redirect transactions to some other object.
Test Plan:
- Subscribed/unsubscribed/attached/detached from Differential, saw transactions appear properly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4810
Differential Revision: https://secure.phabricator.com/D8802
Summary: Ref T4809. This saves us a few round trips to find a Buildable, and generally makes the notion of "active" more explicit (i.e., not just the diff with the largest ID). In the future, we may let you revert to previous diffs, which would make the "largest number" rule not always correct.
Test Plan: Ran `differential.query`, got sensible results.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4809
Differential Revision: https://secure.phabricator.com/D8800
Summary:
Ref T4809. Currently, buildables have a status field but nothing populates it. Populate it:
- When builds change state, update the Buildable state.
- Use the new Buildable state on the web UI.
- Return the new Buildable state from Conduit.
To make it easier to debug/test this:
- Provide `bin/harbormaster update Bxxx ...` to force foreground update of a Buildable.
Test Plan:
- Used `bin/harbormaster update Bxxx --force --trace` to update buildables.
- Looked at buidlable list, saw statuses reported properly.
- Used Conduit to read statuses.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4809
Differential Revision: https://secure.phabricator.com/D8799
Summary:
Ref T4809. Buildables currently have buildStatus and buildableStatus. Neither are used, and no one knows why we have two.
I'm going to use buildableStatus shortly, but buildStatus is meaningless; burn it.
Test Plan: `grep`, examined similar get/set calls, created a new buildable, ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4809
Differential Revision: https://secure.phabricator.com/D8796
Summary:
Ref T4809. This one is more straightforward. A couple of tweaks:
- Remove the WAITING status, since nothing ever sets it and I suspect nothing ever will with the modern way artifacts work (maybe). At a minimum, it's confusing with the new Target status that's also called "WAITING" but means something different.
- Consolidate 17 copies of these status names into one method.
Test Plan: Ran some queries via Conduit, got reasonable looking results.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4809
Differential Revision: https://secure.phabricator.com/D8795
Summary: Ref T4809. I need to sort out some of the "status" stuff we're doing before this is actually useful (there's no sensible "status" value to expose right now) but once that happens `arc` can query this to figure out whether it needs to warn the user about pending/failed builds.
Test Plan: Ran query with various different parameters.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4809
Differential Revision: https://secure.phabricator.com/D8794
Summary: See IRC. Some users are having difficulty figuring out why Herald is taking some actions. Make it easier to get to the transcript.
Test Plan: {F144622}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: dctrwatson, epriestley
Differential Revision: https://secure.phabricator.com/D8804
Summary:
Couple of minor cleanup things here:
- Pass handles to ApplicationTransactions when rendering their stories; this happened implicitly before but doesn't now.
- Add `?text=1` to do ad-hoc rendering of a story in text mode.
- Make Conduit skip unrenderable stories.
- Fix/modernize some text in the Commit story.
Test Plan: Rendered text versions of stories via Conduit and `?text=1`.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: zeeg, spicyj, epriestley
Differential Revision: https://secure.phabricator.com/D8793
Summary:
For Harbormaster tasks which want to poll or wait, this lets them say "try again a little later" without having to sleep and hold a queue slot.
This is basically the same as failing, except that we don't increment the failure counter. Instead, we just set the current lease to the correct length and then exit. The task will be retried after the lease expires.
Test Plan: Using both `bin/harbormaster` and `phd debug taskmaster`, ran a lot of waiting tasks through the queue, faking them to either yield or not yield in a controlled manner. The queue responded as expected, yielding tasks appropraitely and retrying them later.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8792
Summary:
Without this, build steps that have no options (like "wait for previous commits") don't actually save, since the transaction array is empty.
This also generally nice and consistent.
Test Plan: Created a new "wait" step, viewed transaction log.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8791
Summary:
This hooks up all the pieces of the build pipeline so `harbormaster.sendmessage` actually works. Particularly:
- Candidate build steps (i.e., those which interact with external systems) can now "Wait for Message". This pauses them indefinitely when they complete, until something calls `harbormaster.sendmessage`.
- After processing a target, we check if we should move it to PASSED or WAITING.
- Before updating a build, we move WAITING targets with pending messages to either PASSED or FAILED.
- I added an explicit "Building" state, which doesn't affect workflows but communicates more information to human users.
A big part of this is avoiding races. I believe we get the correct behavior no matter which order events occur in:
- We update builds after targets complete and after we receive messages, so we're guaranteed to update once both these conditions are true. This means messages can't be lost (even if they arrive before a build completes).
- The minor changes to the build engine logic mean that firing additional build updates is always safe, no matter what the current state of the build is.
- The build itself is protected by a lock in the build engine.
- The target is not covered by an explicit lock, but for all states only the engine (waiting) //or// the worker (all other states) can interact with it. All of the interactions also move the target state forward to the same destination and have no other side effects.
- Messages are only consumed inside the engine lock, so they don't need an explicit lock.
Test Plan:
- Made an HTTP request wait after completion, then ran a pile of builds through it using `bin/harbormaster build` and the web UI.
- Passed and failed message-awaiting builds with `harbormaster.sendmessage`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, zeeg
Differential Revision: https://secure.phabricator.com/D8788
Summary: Fixes T4590. Use the credentials custom field to allow Harbormaster HTTP requests to include usernames/passwords.
Test Plan: Ran a build plan with credentials, verified they were sent to the remote server.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4590
Differential Revision: https://secure.phabricator.com/D8786
Summary:
Ref T4605. When figuring out how long to wait to update a repository, factor in when it was last pushed. For rarely updated repositories, wait longer between updates.
(A slightly funky thing about this is that empty repos update every 15 seconds, but that seems OK for the moment.)
Test Plan:
Ran `bin/phd debug pulllocal` and saw sensible calculations and output:
```
...
<VERB> PhabricatorRepositoryPullLocalDaemon Last commit to repository "rPOEMS" was 1,239,608 seconds ago; considering a wait of 6,198 seconds before update.
>>> [79] <query> SELECT * FROM `repository` r ORDER BY r.id DESC
<<< [79] <query> 514 us
>>> [80] <query> SELECT * FROM `repository_statusmessage` WHERE statusType = 'needs-update'
<<< [80] <query> 406 us
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rINIH" is not due for an update for 8,754 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rDUCK" is not due for an update for 14 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rMTESTX" is not due for an update for 21,598 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rQWER" is not due for an update for 14 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rBT" is not due for an update for 13 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rSVNX" is not due for an update for 21,598 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rINIG" is not due for an update for 13 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rHGTEST" is not due for an update for 21,598 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rBTX" is not due for an update for 14 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rGX" is not due for an update for 13 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rMTX" is currently updating.
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rPOEMS" is not due for an update for 6,198 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rPHU" is currently updating.
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rSVN" is not due for an update for 21,598 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rPHY" is currently updating.
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rGTEST" is not due for an update for 21,598 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rINIS" is not due for an update for 6,894 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rARCLINT" is not due for an update for 21,599 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rLPHX" is not due for an update for 1,979 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rARC" is not due for an update for 1,824 second(s).
<VERB> PhabricatorRepositoryPullLocalDaemon Repository "rINIHG" is not due for an update for 21,599 second(s).
...
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4605
Differential Revision: https://secure.phabricator.com/D8782
Summary:
Ref T4605. Fixes T3466. The major change here is that we now run up to four simultaneous updates. This should ease cases where, e.g., one very slow repository was blocking other repositories. It also tends to increase load; the next diff will introduce smart backoff for cold repositories to ease this.
The rest of this is just a ton of logging so I can IRC debug these things by having users run them in `phd debug pulllocal` mode.
For T3466:
- You now have to hit four simultaneous hangs to completely block the update process.
- Importing repository updates are killed after 4 hours.
- Imported repository updates are killed after 15 minutes.
Test Plan:
- Ran `phd debug pulllocal` and observed sensible logs and behavior.
- Interrupted daemon from sleeps and processing with `diffusion.looksoon`.
- Ran with various `--not`, `--no-discovery` flags.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3466, T4605
Differential Revision: https://secure.phabricator.com/D8785
Summary:
Ref T4605. Before discovering branches, try to prefill the cache in bulk. For repositories with large numbers of branches, this allows us to issue dramatically fewer queries.
(Before D8780, this cache was usually held across discovery events, so being able to fill it cheaply was not as relevant.)
Test Plan: Ran discovery on Git, Mercurial and SVN repositories. Observed fewer queries for Git/Mercurial.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4605
Differential Revision: https://secure.phabricator.com/D8781
Summary:
Ref T4605. Currently, the PullLocal daemon is responsible for two relatively distinct things:
- scheduling repository updates; and
- actually updating repositories.
Move the "actually updating" part into a new `bin/repository update` command, which basically runs the pull, discover, refs and mirror commands. This will let the parent process focus on scheduling in a more understandable way and update multiple repositories at once. It also makes it easier to debug and understand update behavior since the non-scheduling pipeline can be run separately.
Test Plan:
- Ran `update --trace` on SVN, Mercurial and Git repos.
- Ran PullLocal daemon for a while without issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4605
Differential Revision: https://secure.phabricator.com/D8780
Summary: We have too much space on workboards when displayed on mobile devices.
Test Plan: Shrink browser display, note that all workboards align to common gutters.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8790
Summary: sets action list to crumbs
Test Plan: shrink browser, see mobile action list, click on it, edit
Reviewers: epriestley, btrahan
Reviewed By: btrahan
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8789
Summary: I recently made this better about accepting project names, but we use it in some cases with PHIDs. Make that work properly again.
Test Plan: Clicked "New Task" from a project page.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8778
Summary:
Fixes T4477. Sort of winging this but it's probably the right fix?
One error in T4477.
One error via email:
```
[2014-04-15 17:44:34] ERROR 8: Undefined index: /some_index/ at [/phab_path/phabricator/src/applications/owners/storage/PhabricatorOwnersPackage.php:213]
#0 PhabricatorOwnersPackage::findLongestPathsPerPackage(Array of size 3 starting with: { 0 => Array of size 3 starting with: { id => 5 } }, Array of size 8 starting with: { / => Array of size 2 starting with: { /some_index/some_file.py => true } }) called at [/phab_path/phabricator/src/applications/owners/storage/PhabricatorOwnersPackage.php:170]
#1 PhabricatorOwnersPackage::loadPackagesForPaths(Object PhabricatorRepository, Array of size 2 starting with: { 0 => /some_index/some_file.py }) called at [/phab_path/phabricator/src/applications/owners/storage/PhabricatorOwnersPackage.php:119]
...
```
Test Plan: Will make @zeeg do it.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, zeeg
Maniphest Tasks: T4477
Differential Revision: https://secure.phabricator.com/D8779
Summary: Fixes T4655. Basically leaves the display code intact for legacy installs but removes the option from the UI and removes "create" code.
Test Plan:
tried to attach file and the action was not in the dropdown!
made a new task and it worked!
commented on an old task and it worked!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4655
Differential Revision: https://secure.phabricator.com/D8777
Summary:
See discussion in D8773. Three small adjustments which should help prevent this kind of issue:
- When queueing followup tasks, hold them on the worker until we finish the task, then queue them only if the work was successful.
- Increase the default lease time from 60 seconds to 2 hours. Although most tasks finish in far fewer than 60 seconds, the daemons are generally stable nowadays and these short leases don't serve much of a purpose. I think they also date from an era where lease expiry and failure were less clearly distinguished.
- Increase the default wait-after-failure from 60 seconds to 5 minutes. This largely dates from the MetaMTA era, where Facebook ran services with high failure rates and it was appropriate to repeatedly hammer them until things went through. In modern infrastructure, such failures are rare.
Test Plan:
- Verified that tasks queued properly after the main task was updated.
- Verified that leases default to 7200 seconds.
- Intentionally failed a task and verified default 300 second wait before retry.
- Removed all default leases shorter than 7200 seconds (there was only one).
- Checked all the wait before retry implementations for anything much shorter than 5 minutes (they all seem reasonable).
Reviewers: btrahan, sowedance
Reviewed By: sowedance
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8774
Summary:
Recently we see issues with huge commits (branch cuts for www) where people received hundreds of emails for the same commit. By checking all the active and archived tasks related to such commits, I saw the following pattern:
- The commit itself is marked as importStatus = 15 which means all the processing was actually done;
- In archived tasks, I see one PhabricatorRepositorySvnCommitMessageParserWorker, one PhabricatorRepositorySvnCommitChangeParserWorker, followed by many PhabricatorRepositoryCommitHeraldWorker, which means that the PhabricatorRepositoryCommitOwnersWorker (who schedule those herald tasks) was never done;
- PhabricatorRepositoryCommitOwnersWorker is always active (for days) with failureCount = 0;
- In daemon log I see a lot of lease expire exception for PhabricatorRepositoryCommitOwnersWorker.
So to me it looks like the following happened:
- Everything is fine until we schedule the PhabricatorRepositoryCommitOwnersWorker
- PhabricatorRepositoryCommitOwnersWorker actually successfully finished but its running time exceed 60s. Before it finishes, it scheduled the PhabricatorRepositoryCommitHeraldWorker task
- When we try to archive it, the lease expiration exception happened. As a result, it stayed active and will be picked up immediately since it is in the head of the queue
- The two steps above repeat forever until we kill it
I am not sure why we want to check lease expiration when we are archiving the task. For now I am giving the worker a little more time since parsing half million affected path needs some time..
Test Plan: Patched in our production and it worked.
Reviewers: lifeihuang, JoelB, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8773
Summary: Ref T3551. Since we now require repositories in order to perform policy checks, things that did loads properly don't need to load this data explicitly.
Test Plan: Edited a product, cut a new branch.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3551
Differential Revision: https://secure.phabricator.com/D8769
Summary:
Ref T3551. Releeph has old-style `loadX()` methods; get rid of one of them.
Differential has a couple of copies of this too, clean them up.
Test Plan:
- Viewed various differential revisions (with and without projects).
- Viewed and edited Releeph products.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3551
Differential Revision: https://secure.phabricator.com/D8768
Summary:
Fixes T3657. We no longer construct ambiguous URIs, so product names are no longer restricted.
Also fix some minor URI construction stuff.
Test Plan: Created a product called "branch".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3657
Differential Revision: https://secure.phabricator.com/D8767
Summary:
Ref T3657. General changes here:
- Removes `ReleephProjectController`, which is the source of T3657.
- Mostly moves requests from "RQ" as a monogram to "Y" (looks like a merge, mnemonic for "yank"?, we don't have too many characters left). This should be essentially only cosmetic. This reduces ambiguity with "rQ" and "R123", which are current and future repository monograms. This will continue in the next few diffs.
- Makes requests implement policies correctly.
Test Plan: Created, edited, browsed requests.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3657
Differential Revision: https://secure.phabricator.com/D8766
Summary:
Ref T4045. We have a lot of direct queries against the hunk table right now. These are messy, not really policy-aware, and limit our options on T4045.
This query is unusual (it requires changesets, and does not accept IDs). This keeps us from having to load changeset -> diff -> revision in order to do policy checks. We could also fix this with smarter policy checks and caching, but I'd rather not open that can of worms for now. This object is very low level and relatively unusual, and this small deviation from convention seems like the cleanest cut to make to keep this from snowballing.
Test Plan: Used Herald dry runs to verify that the affected rules still output the same data.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4045
Differential Revision: https://secure.phabricator.com/D8765
Summary: Ref T4045. These three methods are fairly copy-pastey. Provide a more formal DifferentialHunk API for querying various types of line ranges.
Test Plan: Used test console to verify that "added content", "removed content", and "changed content" rules still produce the same data.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4045
Differential Revision: https://secure.phabricator.com/D8764
Summary:
Ref T3644. Ref T3657. Ref T3549. Basically:
- Move these controllers to modern query/policy infrastructure.
- Move them to consistent, ID-based URIs.
- Rename "Project" to "Product"; "Pick Request" to "Pull Request".
- Clean up a few UI things here and there.
Test Plan:
- Created and edited branches.
- Opened and closed branches.
- Viewed branch history.
- Searched within a branch.
- Browsed to branches from products.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3644, T3549, T3657
Differential Revision: https://secure.phabricator.com/D8646
Summary: Fixes T4774. With the new code and configuration instructions downplaying the role of arcanist project we weren't writing affected paths at all! I had this issue on my installation - no affected paths were written. We seem to always have the repository now though if we can see it, so not too bad of a fix.
Test Plan: updated a diff and was able to browse in diffusion.
Reviewers: epriestley, bitglue
Reviewed By: epriestley, bitglue
Subscribers: bitglue, epriestley, Korvin
Maniphest Tasks: T4774
Differential Revision: https://secure.phabricator.com/D8757
Summary: Fixes T2328. Note the audit part is fixed now.
Test Plan: Tried to reproduce the audit issue by raising my own commit as a problem; it showed up before code changes! Made a diff with my self as author and reviewer; it showed up as expected
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T2328
Differential Revision: https://secure.phabricator.com/D8755
Summary: Fixes T3576
Test Plan: made a countdown and it looked right on view. edited it and it had the right values pre and post edit.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T3576
Differential Revision: https://secure.phabricator.com/D8754
Summary: We make a silly query for every commit if you copy/paste a diff.
Test Plan: Copy/pasted diffs now render in fewer than 30 seconds.
Reviewers: btrahan, spicyj
Reviewed By: btrahan, spicyj
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8758
Summary: I haven't been able to understand why this isn't set by default in production environments (since it is recommended to do so anyway).
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8743
Summary: ...add a "renderingTarget" to FeedStory and use it as appropos. Overall, not a ton of changes was necessary to make this work. I think this could be made to be even cleaner by going through each and every feed story and re-implementing as necessary with the full toolset available. But this is good enough for now I think, and just something to keep cleaning up when we're in here. Fixes T4630.
Test Plan: made a task. gave it a token. viewed my feed - saw stories. used conduit.feed.query with mode == 'text' and got good readable results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: spicyj, epriestley, Korvin
Maniphest Tasks: T4630
Differential Revision: https://secure.phabricator.com/D8750
Summary: ...use the prefab stuff as it does fancier things than we were doing. Only trick then really is to pass username and the map of handle phids => icons to the client so prefab can work nicely. Fixes T4775.
Test Plan: made a herald rule with projects and users. Saw nice icons. Reloaded page and still saw nice icons.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4775
Differential Revision: https://secure.phabricator.com/D8749
Summary:
Ref T4786. This doesn't fully fix the issue since there's no way to make channels public yet, but gets some of the infrastructure more up to date.
- Allow public access to the list and log controllers.
- Implement proper policy checks in the Events (this has no practical impact on the only controller that loads this stuff, it's just for general/future purposes).
- Remove a old-style unused method for building page frames.
Test Plan: Viewed log list and log details as logged-in and logged out users.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4786
Differential Revision: https://secure.phabricator.com/D8746
Summary:
When we generate account tokens for CSRF keys and email verification, one of the inputs we use is the user's password hash. Users won't always have a password hash, so this is a weak input to key generation. This also couples CSRF weirdly with auth concerns.
Instead, give users a dedicated secret for use in token generation which is used only for this purpose.
Test Plan:
- Ran upgrade scripts.
- Verified all users got new secrets.
- Created a new user.
- Verified they got a secret.
- Submitted CSRF'd forms, they worked.
- Adjusted the CSRF token and submitted CSRF'd forms, verified they don't work.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8748
Summary:
I added a getTaskPriorityColor function to the ManiphestTaskPriority class which returns the color set in the maniphest config for the given priority.
This is in preparation for a change to arcanist which will allow it to display the priority color (if it is a supported color) upon running `arc tasks`.
Fixed some linting issues
Test Plan:
Invoke the maniphest.info method from conduit and ensure that:
* The priorityColor property is given in the json
* the priorityColor property is set correctly
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8734
Summary: Fixes T4755. This also includes putting in a note that Google might ToS you to use the Google+ API. Lots of code here as there was some repeated stuff between OAuth1 and OAuth2 so I made a base OAuth with less-base OAuth1 and OAuth2 inheriting from it. The JIRA provider remains an independent mess and didn't get the notes field thing.
Test Plan: looked at providers and read pretty instructions.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4755
Differential Revision: https://secure.phabricator.com/D8726
Summary: Fixes T4777. We technically support `?projects=...` already, but parse it in an unusual way and apply old, awkward, excessively strict lookups to it.
Test Plan: Used reasonable, standard, human-readable strings to prefill `?projects=` and got the results I expected.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4777
Differential Revision: https://secure.phabricator.com/D8733
Summary:
Arcanist is currently displaying all tasks as closed when invoking `arc tasks`.
This is because arcanist is setting the display to closed if there is anything in the `status` property. Adding an isClosed property will allow arcanist to properly display open/closed status on tasks by checking against the isClosed property. The isClosed property will be set according to the closed property that is set on each status in maniphest.
Test Plan:
Invoke the conduit maniphest.info method on any task and insure that:
# The isClosed property is included in the properties
# that it is set properly according to the statuses set for maniphest.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: chad, epriestley, Korvin
Maniphest Tasks: T4744
Differential Revision: https://secure.phabricator.com/D8731
Summary:
Fixes T4759.
Turns out Chrome on windows doesn't really like the word joiner character. We'll switch back to zwsp but make it `position: absolute;` so it doesn't turn into a line break.
Test Plan: Looked at diffs in IE9 and Chrome Windows. Made sure copying still works as expected.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4759
Differential Revision: https://secure.phabricator.com/D8727
Summary: Fixes T4772. We weren't parsing generated public keys properly, and were storing them in the wrong format.
Test Plan:
- Updated a private key.
- Generated a public key.
- Saved the public key.
- Used a generated private key to authenticate.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4772
Differential Revision: https://secure.phabricator.com/D8721
Summary:
Fixes T4773. For config settings of type `list<string>`, `set`, or `list<regex>`, the "defaults" table and "examples" aren't always in the same format you should actually use when changing the setting.
This is pretty confusing. Instead, always show the settings in the desired format. For example, if the user should enter a newline-separated list, show them a newline separated list.
Test Plan:
- Grepped for `list<string>`, `list<regex>`, and `'set'`; verified all the config had the right example format (most already did).
- Viewed config settings of various kinds, including custom settings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4773
Differential Revision: https://secure.phabricator.com/D8725
Summary: wasn't working due to some type issues. Fixes T4756. I also made it display nicer while I was debugging this.
Test Plan: created a herald rule to block changes that added refs. git tag -a "test" -m "test test"; git push origin test got me blocked!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4756
Differential Revision: https://secure.phabricator.com/D8724
Summary: Fixes T3208. This forces us to bind+search even if there are no anonymous credentials.
Test Plan: Checked the box, saved the form. Unchecked the box, saved the form. LDAP??
Reviewers: Firehed
Reviewed By: Firehed
Subscribers: epriestley
Maniphest Tasks: T3208
Differential Revision: https://secure.phabricator.com/D8723
Summary: Ref T182. This feature rarely/never works and is on the balance enormously confusing to users (see <https://github.com/facebook/phabricator/issues/566>). If installs have somehow made it sort of work, they can comment this line out for now until we have time to make this work more reasonably.
Test Plan: Looked at a revision in Differential.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D8719
Summary:
Fixes T4736. Currently, we incorrectly skip the `writeImportStatusFlag()` call if publishing is disabled (the `herald-disabled`) check. This means we don't flag the commit as imported, and don't move the pipeline forward correctly.
Instead, we only want to skip the owners stuff, not the pipeline stuff. Move that to a method.
(Also fix a nearby TODO now that we have a permanent failure exception.)
Test Plan:
- Used `scripts/repository/reparse.php --owners ...` to execute this code, fiddled with things to hit both the disabled and enabled branches and verified the flag stuff is still reached.
- Faked the exceptions and made sure they raise correctly.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4736
Differential Revision: https://secure.phabricator.com/D8715
Summary: I also changed PhabricatorApplicationTransactionFeedStory and the TokenGivenFeedStory to include only the title/first line of the feed story, which is more convenient (previously, strip_tags gave a multi-line story without even any linebreaks) and more consistent with the other story types.
Test Plan: Added a requestbin URL to feed.http-hooks, commented on a Differential, and saw storyText equal to "alpert added a comment to D2: c." in the POST data it received.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T4630
Differential Revision: https://secure.phabricator.com/D8710
Summary: From IRC, this is sometimes helpful for debugging if there's a mailing list issue or something like that. For example, it can show "To" and "Cc".
Test Plan: Got some email, saw headers in it.
Reviewers: dctrwatson, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8708
Summary:
This text is overly repetitive and is not super important. Keeps the other states. Also
- Easier to parse reviewers now
- Mobile is less janky
Test Plan:
reload my list of diffs
{F138756}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8707
Summary: Fixes T4687. This was also pretty easy...!
Test Plan: made a package with a test user as owner. added package as owner. looked right on commit page. logged in as test user and verified audit showed up on home page.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: chad, epriestley, Korvin
Maniphest Tasks: T4687
Differential Revision: https://secure.phabricator.com/D8705
Summary: ...the key is to move a layer lower and beam down the updated comment. There is a wee bit of Javascript gymnastics going on here. Fixes T4608.
Test Plan: made a comment + resolve. clicked edit and made changes. noted transaction updated correctly and "history" link worked. edited again to a deletion and noted the "this is deleted" looked right and history link still worked
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, chad
Maniphest Tasks: T4608
Differential Revision: https://secure.phabricator.com/D8702
Summary: Ref T4687. Trickier part is adding packages; will require some typeahead core changes
Test Plan: add a project as an auditor succuessfully!
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4687
Differential Revision: https://secure.phabricator.com/D8704
Summary: Ref T4371. We can reuse more code for this "your stuff is empty" error, now, and benefit from global rate limiting and being able to reply to arbitrary addresses.
Test Plan: Sent valid, empty, and empty-ignored email via `mail_handler.php`, got appropriate actions/errors/states.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4371
Differential Revision: https://secure.phabricator.com/D8701
Summary: This "Reply to comment, etc., etc." section got lost along the way at some point. Restore it for transaction mail.
Test Plan: Received mail from Maniphest with reply instructions.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8700
Summary:
We currently share the same regexp between PHID matching (usually unambiguous) and remarkup matching (often ambiguous).
This means that some project monograms which should work fine don't work properly in some contexts. Improve these behaviors.
For example:
- `#domain.com`
- Previously did not work at all.
- Now works in unambiguous cases, and in remarkup.
- `#1`
- Previously did not work at all.
- Now works in unambiguous cases.
- `#dot.`
- Previously did not work at all.
- Now works in unambiguous cases.
Test Plan:
- Created projects `domain.com`, `1`, etc.
- Used jump nav to match them unambiguously, everything worked.
- Used remarkup preview to match them ambiguously, the reasonable ones worked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8703
Summary:
Ref T4371. Ref T4699. Fixes T3994.
Currently, we're very conservative about sending errors back to users. A concern I had about this was that mistakes could lead to email loops, massive amounts of email spam, etc. Because of this, I was pretty hesitant about replying to email with more email when I wrote this stuff.
However, this was a long time ago. We now have Message-ID deduplication, "X-Phabricator-Sent-This-Mail", generally better mail infrastructure, and rate limiting. Together, these mechanisms should reasonably prevent anything crazy (primarily, infinite email loops) from happening.
Thus:
- When we hit any processing error after receiving a mail, try to send the author a reply with details about what went wrong. These are limited to 6 per hour per address.
- Rewrite most of the errors to be more detailed and informative.
- Rewrite most of the errors in a user-facing voice ("You sent this mail..." instead of "This mail was sent..").
- Remove the redundant, less sophisticated code which does something similar in Differential.
Test Plan:
- Using `scripts/mail/mail_receiver.php`, artificially received a pile of mail.
- Hit a bunch of different errors.
- Saw reasonable error mail get sent to me.
- Saw other reasonable error mail get rate limited.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3994, T4371, T4699
Differential Revision: https://secure.phabricator.com/D8692
Summary: This ensures that two comments by the same author on the same line are sorted properly.
Test Plan: Before this patch, made two comments that appeared in the wrong order. With this patch, they sort correctly.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8697
Summary: Make the actions appear in crumbs on mobile
Test Plan: Test action list on a mobile diff layout
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4730
Differential Revision: https://secure.phabricator.com/D8691
Summary: I accidentally made these exceptionally ugly recently.
Test Plan: {F137411}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley, chad
Differential Revision: https://secure.phabricator.com/D8684
Summary: The "burnup chart" relies on these to determine when tasks opened and we recently stopped writing them. Keep writing them for now. They're fluff and don't show up in the UI, but draw the right chart.
Test Plan: Saw chart go up when I made tasks.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8682
Summary:
This adds a system which basically keeps a record of recent actions, who took them, and how many "points" they were worth, like:
epriestley email.add 1 1233989813
epriestley email.add 1 1234298239
epriestley email.add 1 1238293981
We can use this to rate-limit actions by examining how many actions the user has taken in the past hour (i.e., their total score) and comparing that to an allowed limit.
One major thing I want to use this for is to limit the amount of error email we'll send to an email address. A big concern I have with sending more error email is that we'll end up in loops. We have some protections against this in headers already, but hard-limiting the system so it won't send more than a few errors to a particular address per hour should provide a reasonable secondary layer of protection.
This use case (where the "actor" needs to be an email address) is why the table uses strings + hashes instead of PHIDs. For external users, it might be appropriate to rate limit by cookies or IPs, too.
To prove it works, I rate limited adding email addresses. This is a very, very low-risk security thing where a user with an account can enumerate addresses (by checking if they get an error) and sort of spam/annoy people (by adding their address over and over again). Limiting them to 6 actions / hour should satisfy all real users while preventing these behaviors.
Test Plan:
This dialog is uggos but I'll fix that in a sec:
{F137406}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8683
Summary: This should prevent long lines from making the code width different between files, which can be annoying. (And of course, it stops long lines from making a giant scrollbar too.)
Test Plan:
Loaded this diff in Chrome, Firefox, IE9, and IE8:
{F137505}
(That's a screenshot from Chrome, but it looks about the same in the other browsers.)
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, chad
Maniphest Tasks: T2004
Differential Revision: https://secure.phabricator.com/D8686
Summary: This sets the name parameter when Drydock uploads a file so that the storage engine picks it up correctly.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8673
Summary:
This does two things
- Modernizes Table of Contents
- Makes Differential reasonable on mobile
I say resonable, as you still have to scroll horizontal to see the entire diff. This is minor as the rest of the page is 100x more useful. A 1-up view would be preferred, but this is still an improvement.
Test Plan: Used iOS simulator for browsing diffs.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, chad
Differential Revision: https://secure.phabricator.com/D8681
Summary: ...also link to commits we know about in "Local Commits" and "Revision Update History" tables. Fixes T4585.
Test Plan: made a repo. made a diff (foo) and committed it (bar). made a new diff that was comprised of two local commits. noted links to (bar) in various commit hashes as expected
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, chad
Maniphest Tasks: T4585
Differential Revision: https://secure.phabricator.com/D8679
Summary: Fixes T3047. Update this document and remove some lies ("menu bar is read in admin interfaces"!!!!).
Test Plan:
- Read text.
- Searched for "System Agent" in the UI and replaced it with "bot" or "bot/script" or similar.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T3047
Differential Revision: https://secure.phabricator.com/D8675
Summary:
Fixes T4065. This divides user creation into separate "Standard User" and "Script/Bot" workflows which show only relevant fields and provide guidance.
This fixes the verification mess associated with script/bot users by verifying their email addresses automatically.
Test Plan:
- Created a standard user.
- Created a script/bot.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8674
Summary: Ref T4065. Moves the last of the weird alternate edit UI to profiles. The old "Edit" controller is now for creation only, and the funky pencil icon is gone.
Test Plan: Created accounts; sent welcome email.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8670
Summary: Ref T4065. Give administrators an "Edit Settings" link from profiles, which allows selective edit of settings panels. Enable Conduit, SSH Keys, and VCS Password.
Test Plan:
- Used these panels for a bot.
- Used these panels on my own account.
- Tried to use these panels for a non-bot account, was denied.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8668
Summary: Ref T4065. Moves the "disable / enable" and "make / unmake administrator" actions to profiles.
Test Plan: Disabled and enabled users, and made and unmade administrators.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8666
Summary:
Ref T4065. Currently, we have this super copy/pasted "edit profile picture" UI for system agents.
Instead, give administrators direct access from profiles, so they can use the same code pages do.
Test Plan: Edited my profile picture and profile details. Edited an agent's. Was unable to edit a non-agent user.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8664
Summary: Ref T4065. Make this work in a more standard way which administrators have a reasonable shot at finding and using. See D8662 for discussion.
Test Plan: Changed a user's username.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8663
Summary:
Ref T4065. The existence of two separate edit workflows for users is broadly confusing to administrators.
I want to unify user administration and improve administration of system agent accounts. Particularly, I plan to:
- Give administrators limited access to profile editing of system agents (e.g., change profile picture).
- Give administrators limited access to Settings for system agents.
- Broadly, move all the weird old special editing into standard editing.
Test Plan:
- Hit all the errors (delete self, no username, wrong username).
- Deleted a user.
- Visited page as a non-admin, got 403'd.
- Viewed old edit UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4065
Differential Revision: https://secure.phabricator.com/D8662
Summary:
Currently, users get an error when making any changes to this field if they don't have a linked JIRA account.
Instead:
- We should only raise an error if they're trying to //add// issues, and only on the new issues. It's always fine to remove issues, and existing issues the author can't see are also fine.
- When we can't add things because there's no account (vs because there's a permissions error or they don't exist), raise a more tailored exception.
Test Plan:
- As JIRA and non-JIRA users, made various edits to this field.
- Got appropriate exceptions, including better tailoring.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: mbishopim3, epriestley
Differential Revision: https://secure.phabricator.com/D8676
Summary: Fixes T4632.
Test Plan: viewed a transcript for rule x which depends on rule y and noted "rule y" printed out rather than "PHID-BLAH-BLAH"
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4632
Differential Revision: https://secure.phabricator.com/D8678
