Summary: Ref T13105. This needs refinement but blame sort of works again, now.
Test Plan: Viewed files in Diffusion and Files; saw blame in Diffusion when viewing in source mode.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19309
Summary: Ref T13105. Ref T13047. This makes symbol indexes work with DocumentEngine in Files, and restores support in Diffusion.
Test Plan: Command-clicked stuff, got taken to the symbol index with reasonable metadata in Diffusion, Differential and Files.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105, T13047
Differential Revision: https://secure.phabricator.com/D19307
Summary:
Ref T13105. Fixes some issues with line linking and highlighting under DocumentEngine:
- Adding `$1-3` to the URI didn't work correctly with query parameters.
- Reading `$1-3` from the URI didn't work correctly because Diffusion parses them slightly abnormally.
Test Plan: Clicked/dragged lines to select them. Observed URI. Reloaded page, got the right selection.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19305
Summary: Depends on D19273. Ref T13105. Adds "Change Text Encoding..." and "Highlight As..." options when rendering documents, and makes an effort to automatically detect and handle text encoding.
Test Plan:
- Uploaded a Shift-JIS file, saw it auto-detect as Shift-JIS.
- Converted files between encodings.
- Highlighted various things as "Rainbow", etc.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19274
Summary:
Ref T13114. See PHI522. Although it looks like results are already ordered correctly, the override rendering isn't accommodating disabled results gracefully.
Give closed results a distinctive look (grey + strikethru) so it's clear when you're autocompleting `@mention...` into a disabled user.
Test Plan: {F5497621}
Maniphest Tasks: T13114
Differential Revision: https://secure.phabricator.com/D19272
Summary:
Depends on D19258. Ref T13105.
- When the default renderer is an Ajax renderer, don't replace the URI. For example, when viewing a Jupyter notebook, the URI should remain `/F123`, not instantly change to `/view/123/jupyter/`.
- Fix an issue where non-ajax renderers could fail to display the dropdown menu properly.
Test Plan:
- Viewed a Jupyter notebook, stayed on the same URI.
- Changed rendering, got different URIs.
- Viewed a JSON file and toggled renderers via dropdown.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19259
Summary:
Ref T13105. This adds various small client-side improvements to document rendering.
- In the menu, show which renderer is in use.
- Make linking to lines work.
- Make URIs persist information about which rendering engine is in use.
- Improve the UI feedback for transitions between document types.
- Load slower documents asynchronously by default.
- Discard irrelevant requests if you spam the view menu.
Test Plan: Loaded files, linked to lines, swapped between modes, copy/pasted URLs.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19256
Summary:
Depends on D19238. Ref T13105. Give document engines some reasonable automatic support for degrading gracefully when someone tries to hexdump a 100MB file or similar.
Also, make "Video" sort above "Audio" for files which could be rendered either way.
Test Plan: Viewed audio, video, image, and other files. Adjusted limits and saw full, partial, and fallback/error rendering.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19239
Summary: Depends on D19237. Ref T13105. This adds a (very basic) "Hexdump" engine (mostly just to have a second option to switch to) and a selector for choosing view modes.
Test Plan: Viewed some files, switched between audio/video/image/hexdump.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19238
Summary:
See <https://discourse.phabricator-community.org/t/desktop-only-notifications-mode-is-broken/1234>. Ref T13102. The "Desktop Only" mode for notifications currently shows both desktop and web notifications.
In fact, `JX.Notification` currently has no ability to render notifications as desktop-only. Make this work.
Note that many of the variables and parameters here, including `showAnyNotification`, `web_ready`, and `desktop_ready`, are named in an incorrect or misleading way. However, the new behavior appears to be correct.
Test Plan:
- Emitted test notifications in "No Notifications", "Web Only", "Web and Desktop", and "Desktop" modes.
- Saw appropriate notifications appear in the UI.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19233
Summary:
See PHI451. Ref T13102. DarkConsole uses an ancient inline "onclick" handler to expand the stack traces for errors.
The new Content-Security-Policy prevents this from functioning.
Replace this with a more modern behavior-driven action instead.
Test Plan:
- Clicked some errors in DarkConsole, saw stack traces appear.
- Grepped for `onclick` and `jsprintf()` to see if I could find any more of these, but came up empty.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19218
Summary:
Ref T13102. An install has a custom rule for bridging JIRA references via Doorkeeper and would like to be able to render them as `JIRA-123` instead of `JIRA JIRA-123 Full JIRA title`.
I think it's reasonable to imagine future support upstream for `JIRA-123`, `{JIRA-123}`, and so on, although we do not support these today. We can take a small step toward eventual support by letting the rendering pipeline understand different view modes.
This adds an optional `name` (the default text rendered before we do the OAuth sync) and an optional `view`, which can be `short` or `full`.
Test Plan:
I tested this primarily with Asana, since it's less of a pain to set up than JIRA. The logic should be similar, hopefully.
I changed `DoorkeeperAsanaRemarkupRule` to specify `name` and `view`, e.g `'view' => (mt_rand(0, 1) ? 'short' : 'full')`. Then I made a bunch of Asana references in a comment and saw them randomly go short or long.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19215
Summary:
See <https://discourse.phabricator-community.org/t/lightbox-not-working/1201/3>. The lightbox code is fragile and currently relies on simulating a click on the actual "<a />" tag surrounding other images in the document.
This breaks the prev/next links which ignore the event because it there's no "<img />".
Instead, don't simulate clicks and just call the code we want directly.
Test Plan: Added several images to a page, used lightbox prev/next buttons to cycle between them.
Differential Revision: https://secure.phabricator.com/D19197
Summary:
Depends on D19192. Ref T4190. Ref T13101. Instead of directly including the proxy endpoint with `<img src="..." />`, emit a placeholder and use AJAX to make the request. If the proxy fetch fails, replace the placeholder with an error message.
This isn't the most polished implementation imaginable, but it's much less mysterious about errors.
Test Plan: Used `{image ...}` for valid and invalid images, got images and useful error messages respectively.
Maniphest Tasks: T13101, T4190
Differential Revision: https://secure.phabricator.com/D19193
Summary: Depends on D19190. Fixes T12590. Ref T13099. Replaces the barely-usable, gigantic, poorly ordered "<select />" control with a tokenizer. Attempts to fix various minor issues.
Test Plan:
- Edited paths: include/exclude paths, from different repositories, different actual paths.
- Used "Add New Path" to add rows, got repository selector prepopulated with last value.
- Used "remove".
- Used validation typeahead, got reasonable behaviors?
The error behavior if you delete the repository for a path is a little sketchy still, but roughly okay.
Maniphest Tasks: T13099, T12590
Differential Revision: https://secure.phabricator.com/D19191
Summary: Ref T12590. This is ancient code which was used to prefill `/trunk/tfb/www/` or similar at Facebook. I don't think it ever had a UI and no install has asked for this feature since 2011.
Test Plan: Grepped for affected symbols, edited paths in Owners.
Maniphest Tasks: T12590
Differential Revision: https://secure.phabricator.com/D19189
Summary:
Depends on D19183. Ref T11015. Currently, adding a trailing slash works great and omitting it mysteriously doesn't work.
Store a normalized version with an unconditional trailing slash for the lookup logic to operate on, and a separate display version which tracks what the user actually typed.
Test Plan:
- Entered "/src/main.c", "/src/main.c/", saw them de-duplicate.
- Entered "/src/main.c", saw it stay that way in the UI but appear as "/src/main.c/" internally.
- Added a rule for "/src/applications/owners" (no slash), created a revision touching paths in that directory, saw Owners fire for it.
- Changed the display value of a path only ("/src/main.c" to "/src/main.c/"), saw the update reflected in the UI without any beahvioral change.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19184
Summary:
Ref T13099. See that task for discussion. Chrome is unhappy with an MFA form submitting to an endpoint which redirects you to an OAuth URI.
Instead, do the redirect entirely on the client.
Chrome's rationale here isn't obvious, so we may be able to revert this at some point.
Test Plan: Went through the OAuth flow locally, was redirected on the client. Will verify in production.
Maniphest Tasks: T13099
Differential Revision: https://secure.phabricator.com/D19177
Summary:
Depends on D19166. Ref T13088. When the user scrolls away from a followed log, break the focus lock.
Let users stop following a live log.
Show when lines are added more clearly.
Don't refresh quite as quickly give users a better shot at clicking the stop button.
These behaviors can probably be refined but are at least more plausible and less actively user-hostile than the first version of this behavior was.
Test Plan: Used `write-log --rate` to write a large log slowly. Clicked "Follow Log", followed for a bit. Scrolled away, still got live updates but no more scroll lock. Clicked stop, no more updates.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19167
Summary:
Depends on D19165. Ref T13088. Currently, in other applications, we use Zero Width Spaces and Javascript "copy" listeners to prevent line numbers from being copied. This isn't terribly elegant.
Modern browsers support a second approach: using psuedo-elements with `content`. Try this in Harbormaster since it's conceptually cleaner, at least. One immediate drawback is that Command-F can't find this text either.
Test Plan: In Safari, Chrome and Firefox, highlighted ranges of lines and copy/pasted text. Got just text (no line numbers) in all cases.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19166
Summary: Depends on D19163. Ref T13088. Increase the generality of this code so it can be shared with Harbormaster.
Test Plan: Clicked individual lines, clicked-and-dragged, etc., in Paste. Got sensible URI and highlight behaviors.
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19164
Summary:
Depends on D19162. Ref T13088. When a user links to `$1234`, we need to render a default view of the log with a piece at the head, a piece at the end, and a piece in the middle.
We also need to figure out the offset for line 1234, or multiple offsets for "1234-2345".
Since the logic views/reads mostly anticipated this it isn't too much of a mess, although there are a couple of bugs this exposes with view specifications that use combinations of parameters which were previously impossible.
Test Plan: Viewed a large log with no line marker. Viewed `$1`. Viewed `$end`. Viewed `$35-40`, etc. Expanded context around logs.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19163
Summary: Depends on D19156. Ref T13094. This replaces the remaining forms in the file embed view and lightbox with normal download links.
Test Plan: Clicked "Download" and lightbox -> download for embedded files.
Maniphest Tasks: T13094
Differential Revision: https://secure.phabricator.com/D19157
Summary: Depends on D19152. Ref T13088. This adds live log tailing. It is probably not the final version of this feature because it prevents escape once you begin tailing a log.
Test Plan: Used `bin/harbormaster write-log --rate ...` to write a log slowly. Viewed it in the web UI. Clicked "Follow Log". Followed the log until the write finished, a lifetime later.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19153
Summary:
Depends on D19141. Ref T13088. Some of the fundamental log behaviors like "loading the correct rows" are now a bit better behaved.
The UI is a little less garbage, too.
Test Plan: Viewed some logs and loaded more context by clicking the buttons.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19142
Summary: Depends on D19139. Ref T13088. This doesn't actually work, but is close enough that a skilled attacker might be able to briefly deceive a small child.
Test Plan:
- Viewed some very small logs under very controlled conditions, saw content.
- Larger logs vaguely do something resembling working correctly.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19141
Summary:
Ref T13090. The default width changed recently to become much wider, but the behavior on this control isn't great. Instead:
- Pick a default width somewhere between the two.
- Make the width sticky across show/hide (pressing "f" twice remembers your width instead of resetting it).
- Make the width sticky across reloads (dragging the bar, then reloading the page keeps the bar in the same place).
Test Plan:
- Without settings, loaded page: got medium-width bar.
- Dragged bar wide/narrow, toggled on/off with "f", got persistent width.
- Dragged bar wide/narrow, reloaded page, got persistent width.
- Dragged bar wide/narrow, toggled it off, reloaded page, toggled it on, got persistent width.
Maniphest Tasks: T13090
Differential Revision: https://secure.phabricator.com/D19129
Summary:
Ref T13077. The autosuggester is a little too eager right now, and will eat carriage returns after typing `[` if you never activate the tokenizer.
To fix this, try just canceling sooner. If that doesn't work, we might need to cancel more eagerly by testing to see if the tokenizer is actually open.
Test Plan: Typed `[x]<return>`, got my return instead of getting trapped by the autosuggester.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19110
Summary: Depends on D19107. Ref T13077. The underlying datasource may need some adjustment but this appears to work properly locally.
Test Plan: Typed `[[ por` locally, was suggested "Porcupine Facts". Typed `[[ / ]]`, saw it render as a reference to the wiki root instead of the install root.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19108
Summary:
Depends on D19106. Fixes T5941. Ref T13077. Allows you to find Phriction documents as suggestions from global quick search.
Also supports `w` to jump to Phriction and `w query` to query Phriction.
The actual query logic for the datasource may need some tweaking after it collides with reality, but seems to produce fairly reasonable results in local testing against synthetic data.
Test Plan: Searched for "Porcupine Facts", "Travel Companions", and other useful local pages. Searched for `w`. Searched for `w zebra facts`.
Maniphest Tasks: T13077, T5941
Differential Revision: https://secure.phabricator.com/D19107
Summary: Fixes T13080. The banner wasn't properly included in the sleep/wake logic.
Test Plan:
Mentioned `Dxxx` on a task. Enabled persistent chat to activate Quicksand. Reloaded page. Clicked `Dxxx`. Scrolled down until a changeset header appeared. Pressed back button.
- Before patch: ended up on task, with header still around.
- After patch: ended up on task, with header properly vanquished.
Pressed "forward", ended up back on the revision with the header again.
Maniphest Tasks: T13080
Differential Revision: https://secure.phabricator.com/D19086
Summary: See PHI356. Adds inline comment and done counts to the filetree. Also makes the filetree wider by default.
Test Plan: Fiddled with filetrees in different browsers on different revisions. Added inlines, marked them done/undone.
Differential Revision: https://secure.phabricator.com/D19041
Summary: See PHI333. Some of the cleanup at the tail end of the bulk edit changes made "Assign To" stop working properly, since we don't strip the `array(...)` off the `array(PHID)` value we receive.
Test Plan:
- Used bulk editor to assign and unassign tasks (single value datasource).
- Used bulk editor to change projects (multi-value datasource).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18975
Summary:
Depends on D18939. Ref T13047. Symbol lookup can be activated from a diff (in Differential or Diffusion) or from the static view of a file at a particular commit.
In the latter case, we need to figure out the path a little differently. The character and line number approaches still work as written.
Test Plan:
- Command-clicked symbols in the Diffusion browse view with blame on and off; saw path, line and char populate properly.
- Command-clicked symbols in Differential diff view to check I didn't break anything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18940
Summary: Depends on D18937. Ref T13047. When available, provide character positions so external indexers can return more accurate results.
Test Plan: Clicked symbols in Safari, Firefox and Chrome, got sensible-looking character positions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18939
Summary:
Ref T13047. In some reasonable cases, knowing the path and line number where a symbol appears is useful in ranking or filtering the set of matching symbols.
Giving symbol sources more information can't hurt, and it's generally free for us to include this context since we just need to grab it out of the document and pass it along.
We can't always get this data (for example, if a user types `s idx` into global search, we have no clue) but this is similar to other types of context which are only available sometimes (like which repository a symbol appears in).
Test Plan: Command-clicked some symbols in 1-up (unified) and 2-up (side-by-side) diff views with symbol indexes configured. Got accurate path and line information in the URI I was redirected to.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18936
Summary:
See PHI173. Currently, Herald has an "Assign to" action for tasks, and you can specify custom fields with datasource values (like users or projects) that have a limit (like 1 "Owner", or 12 "Jury Members").
Herald doesn't support these limits right now, so you can write `[ Assign to ][ X, Y, Z ]`. This just means "Assign to X", but make it more clear by actually enforcing the limit in the UI.
Test Plan:
- Created a "projects" custom field with limit 1.
- Tried to create actions that 'assign to' or 'set custom field to' more than one thing, got helpfully rebuffed by the UI.
- Created an "add subscribers" action with more than one value.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18887
Summary: Ref T13025. We're getting kind of a lot of actions, so put them in nice groups so they're easier to work with.
Test Plan: {F5386038}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18880
Summary:
Depends on D18866. Ref T13025. Fixes T12415. This makes the old "Add Comment" action work, and adds support for a new "Set description to" action (possibly, I could imagine "append description" being useful some day, maybe).
The implementation is just a `<textarea />`, not a whole fancy remarkup box with `[Bold] [Italic] ...` buttons, preview, typeaheads, etc. It would be nice to enrich this eventually but doing the rendering in pure JS is currently very involved.
This requires a little bit of gymnastics to get the transaction populated properly, and adds some extra validation since we need some code there anyway.
Test Plan:
- Changed the description of a task via bulk editor.
- Added a comment to a task via bulk editor.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T12415
Differential Revision: https://secure.phabricator.com/D18867
Summary:
Depends on D18862. See PHI173. Ref T13025. Fixes T10005. This redefines bulk edits in terms of EditEngine fields, rather than hard-coding the whole thing.
Only text fields -- and, specifically, only the "Title" field -- are supported after this change. Followup changes will add more bulk edit parameter types and broader field support.
However, the title field now works without any Maniphest-specific code, outside of the small amount of binding code in the `ManiphestBulkEditor` subclass.
Test Plan: Used the bulk edit workflow to change the titles of tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10005
Differential Revision: https://secure.phabricator.com/D18863
Summary:
Depends on D18805. Ref T13025. Fixes T10268.
Instead of using a list of IDs for the bulk editor, power it with SearchEngine queries. This gives us the full power of SearchEngine and lets us use a query key instead of a list of 20,000 IDs to avoid issues with URL lengths.
Also, split it into a base `BulkEngine` and per-application subclasses. This moves us toward T10005 and universal support for bulk operations.
Also:
- Renames most of "batch" to "bulk": we're curently inconsitent about this, I like "bulk" better since I think it's more clear if you don't regularly interact with `.bat` files, and newer stuff mostly uses "bulk".
- When objects in the result set can't be edited because you don't have permission, show the status more clearly.
This probably breaks some stuff a bit since I refactored so heavily, but it seems mostly OK from poking around. I'll clean up anything I missed in followups to deal with remaining items on T13025.
Test Plan:
{F5302300}
- Bulk edited from Maniphest.
- Bulk edited from a workboard (no more giant `?ids=....` in the URL).
- Hit most of the error conditions, I think?
- Clicked the "Cancel" button.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10268
Differential Revision: https://secure.phabricator.com/D18806
Summary:
Ref T13025. See PHI50. Fixes T11286. Ref T10005. Begin modernizing the bulk editor.
For T10005 ("move the bulk editor to modern infrastructure"), rewrite the rendering of the editable set so that it is application-agnostic and can work with any kind of object.
For T11286 ("let users de-select items in the working set"), make the working set editable.
Test Plan:
{F5302158}
- Deselected some objects, applied an edit, saw the edit apply to only selected objects.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T11286, T10005
Differential Revision: https://secure.phabricator.com/D18805
Summary:
See PHI242. All use cases for this that I know of are pretty hacky, but they don't seem perilous, and it's easier than webhooks.
See P1895, T10183, and T9853 for me previously refusing to implement this since all those use cases were also pretty bad.
Test Plan:
- Wrote a rule to add comments, saw it add comments.
- Reviewed summary, re-edited rule, reviewed transcript to check that all the strings worked OK.
- Wrote a new rule for a non-commentable object (a blog) to make sure I wasn't offered the "Add a comment" action.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18823
Summary:
See PHI180. Currently, if you begin creating or editing an inline and then swap display modes (for example, with "View Unified"), your edit is lost.
Persisting the editor state is complicated and this is very rare, so just prevent the action and warn the user instead.
Also make the warning persist for a little longer since a few of the messages, including this one, take a couple seconds to read now.
Test Plan:
- Edited a comment, tried to swap display modes, got a warning.
- Swapped display modes normally with no comment being edited.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18774
Summary:
See PHI185. When looking at a revision, you can Command-Click (Mac) symbols to jump to their definitions (provided the symbol index has been built).
Currently, the code works on any node inside the changeset list, so it activates when clicking links inside inline comments and opening them in a new window.
To avoid this, don't activate if we're inside an inline comment. This technically prevents you from doing a symbol lookup on a symbol inside a codeblock inside an inline, but that seems fine/reasonable.
Test Plan: Wrote `Dxxx` in an inline, command-clicked it. Before: got a symbol lookup. After: just a new tab with the revision.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18753
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary:
Fixes T12979. In D18457, we added a "No Notifications" setting to let users disable the blue and yellow pop-up notifications that alert you when an object has been updated, since some users found them distracting.
However, the change made "do nothing" the default, so all other `JX.Notification` callsites -- which never pass a preference -- were effectively turned off no matter what your setting was set to. This includes the "Read-Only" mode warning (grey), the "High Security" mode warning (purple), the "timezone" warning, and a few others.
Tweak things a little bit so the setting applies to ONLY blue and yellow ("object you're following was updated" / "this object was updated") notifications, not other types of popup notifications.
Test Plan:
- With notifications on in settings, got blue notifications and "Read-only".
- With notifications off in settings, got "Read-only" but no blue notifications.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12979
Differential Revision: https://secure.phabricator.com/D18600
Summary: Only for grey buttons, but can expand. Sets a selected class.
Test Plan: Review new changes in UIExamples.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18501
Summary:
Ref T12970. See PHI43. Currently, the "Show Older Comments" link gets auto-clicked if the user visits **any** anchor. This is not correct.
Instead, only auto-click it if the user visits a numeric anchor. This fixes the behavior approximately 98% of the time. See T12970 for a followup on the remaining ambiguous cases.
Test Plan:
- Viewed a revision with some folded transactions and a "Show Older Comments" link.
- Clicked a link to a file in the table of contents, with a hash like `#1234abcd`.
- Before: Timeline expanded and I ended up somewhere bad.
- After: Timeline no longer expanded.
- Manually changed hash to `#1234` (purely numeric), saw timeline expand.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12970
Differential Revision: https://secure.phabricator.com/D18458
Summary: Fixes T12792. Expands the Notifications to "web, desktop, both, or none" for real-time notifications in settings.
Test Plan: Test with "test notifications" button, and while logged into two accounts with each of the 4 settings.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T12792
Differential Revision: https://secure.phabricator.com/D18457
Summary:
Fixes T12960. When the user enters a date like "1917", we currently loop ~20 million times.
Instead:
- Be a little more careful about parsing.
- Javascript's default behavior of interpreting "2001-02-31" as "2001-03-03" ("February 31" -> "March 3") already seems reasonable, so just let it do that.
Test Plan:
Verified these behaviors:
- `2017-08-08` - Valid, recent.
- `17-08-08` - Valid, recent.
- `1917-08-08` - Valid, a century ago, no loop.
- `2017-02-31` - "February 31", interpreted as "March 3" by Javascsript, seems reasonable.
- `Quack` - Default, current time.
- `0/0/0`, `0/99/0` - Default, current time.
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T12960
Differential Revision: https://secure.phabricator.com/D18383
Summary:
Ref T10252. The previous fix rPa8a9fddb0738 only works for macOS.
Under Windows the @ symbol is composed of AltGr+q. For Chrome and Edge the "AltGr" keypressEvent is like pressing the Control key and the Alt key at the same time.
This fix changes the condition in such a way, that this case (pressing Control and Alt at the same time) is not blocked.
Test Plan:
Testing for the issue:
- Launch Windows 10, Select German Keyboard, Use latest Chrome (60)
- Observe typing `@` does not trigger typeahead
- Apply patch, retest, see typeahead.
Regression tested:
- Windows 10, Chrome, Firefox, Edge
- Mac OS, Chrome, Firefox, Safari
- Keyboard layouts, English, French, German, Spanish
All tests passed
Reviewers: benwick, epriestley
Reviewed By: epriestley
Subscribers: epriestley
Maniphest Tasks: T10252
Differential Revision: https://secure.phabricator.com/D18269
Summary: Ref T12733. In this case, the server returns no new `row`, but we would incorrectly try to bind to one.
Test Plan:
- Created a new comment.
- Edited it.
- Deleted all the text.
- Saved changes.
- Before: Header continues to show phantom "1 Unsubmitted Comment", browser error log reflects one error.
- After: Header reflects comment being deleted, error log is quiet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18262
Summary:
Fixes T8909. Ref T12733.
UI attempts to follow the mock, but is a bit rough since PHUIXButtonView without text in this menu gets weird spacing, we don't have circular buttons yet, and PHUIXActionView without an icon also gets odd spacing.
Test Plan: {F5003125}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733, T8909
Differential Revision: https://secure.phabricator.com/D18128
Summary:
Ref T12733. When a revision has unsubmitted checkmarks:
- Color the banner yellow.
- Show them in the "X unsubmitted" count.
- Make the "X unsubmitted" button cycle between all drafts (written but unpublished comments) and "draft done" (checked but unsubmitted "Done" checkbox comments).
Test Plan:
- Checked a "Done" box, saw "1 unsubmitted" and yellow banner.
- Clicked "5 unsubmitted" repeatedly, saw it cycle through all unsubmitted comments and checkboxes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18127
Summary:
Ref T12733. This paves the way for a separate "hide" operation which completely hides things.
(I didn't extend this to the server side because that would require schema changes and the new "hide" state is client-only.)
Test Plan: Collapsed and expanded inlines, viewed tooltips.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18126
Summary:
Fixes T12806. Ref T12733.
- Don't count synthetic (lint) comments as anything.
- When you begin writing an inline then cancel it, don't count it as anything.
- When we would show "0 / X", just show "X".
Test Plan:
- Viewed a diff with synthetic comments, no button.
- Wrote, then cancelled an inline. No "X comments".
- Clicked / unlicked "Done", saw "X" -> "1 / X".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12806, T12733
Differential Revision: https://secure.phabricator.com/D18103
Summary: Should be button-grey
Test Plan: Use object selector on a diff for a task
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18100
Summary: Updates to use the standard 13px size we use everywhere else, cleans up a few mobile/display bugs, adds a hover state for `tr`.
Test Plan:
Review Diffusion, Daemons, Almanac, People Logs, anything else?
{F4991070}
{F4991071}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18088
Summary: Try to dis-ambiguate various button types and colors. Moves `simple` to `phui-button-simple` and moves colors to `button-color`.
Test Plan: Grep for buttons still inline, UIExamples, PHUIX, Herald, and Email Preferences.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18077
Summary: Ref M1476. Same as D18070 but that did most of the magic.
Test Plan: {F4987961}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18071
Summary: Ref T12779. Try a little harder to get the autoscroll heuristic right, but also just stick to anchors if the URL has an anchor and the scroll position is near that anchor.
Test Plan:
- Loaded an anchored diff at a bunch of window sizes, seemed pretty sticky.
- Added `usleep(100000 * mt_rand(1, 15))` to `ChangesetViewController` to make changesets load slowly and in random order, reloaded a bunch of times while scrolling around, things appeared reasonable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12779
Differential Revision: https://secure.phabricator.com/D18060
Summary: Let's buttons just be an icon, no pressure to also have text.
Test Plan: UIExamples, Search, Home, Policy Controls... Probably 99% of them.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18056
Summary: Ref T12780. I'd like 18,000 GitHub stars now please thank you
Test Plan: this feature is awful
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T12780
Differential Revision: https://secure.phabricator.com/D18053
Summary:
Ref T12733. Ref M1476. This adds `PHUIXButtonView`, for client-side button rendering.
It also adds a PHUIX example which renders the server and client versions of each component side-by-side so it's easier to see if they're messed up.
Test Plan: {F4984128}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18051
Summary: Ref M1476. I'm going to see if I can set up side-by-side "PHUI" vs "PHUIX" to make maintaining them a touch easier. Before doing that, nuke some really old UI examples that don't seem very useful.
Test Plan: Viewed UIExamples, saw fewer bad ones.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18049
Summary: Ref T12733. This adds classes for unsubmitted/unsaved changes, and lays some groundwork for additional buttons.
Test Plan:
- Added, edited, deleted comments.
- Saw bar background color update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18045
Summary: Ref T12733. This ultimately conflicts with scrolling and took about two days to get reported as a bug/regression. See T12733 for a bunch of additional discussion. See T1026 for original discussion.
Test Plan:
- Left single-line and multi-line comments on desktop.
- Tapped to leave single-line comments on mobile.
- Dragged lines on mobile, got a scroll instead of a range comment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18044
Summary: Ref T12733. Completely removes the objectives UI.
Test Plan:
- Grepped for `objective`, etc.
- Browsed revisions, no JS errors / broken stuff.
- (If I missed anything, it's likely to turn up in followup changes.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18043
Summary:
Fixes T12779. Currently, we scroll down if the midline of the changeset is above the midline of the viewport.
This rule can cause us to scroll improperly when loading changesets //after// jumping to their anchors, since the changeset we want to look at will likely have a midpoint above the document midline. That is, we follow an anchor to `X.c`, then it loads, then we scroll past it.
Instead, scroll only if the changeset is (almost) entirely above the viewport.
Test Plan:
Followed an anchor to `PHUIFeedStoryExample`:
{F4984154}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12779
Differential Revision: https://secure.phabricator.com/D18052
Summary: These are unfortunatly manually built so I missed them in testing circle view changes.
Test Plan: Test lightbox, conpherence, uiexamples
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18036
Summary:
Fixes T6906.
I found the code in `behavior-search-typeahead.js` that was throwing away the closedness-detction work done in `Prejab.js::transformDatasourceResults`. Modified it to re-add the correct class name to the `phabricator-main-search-typeahead-result` elements.
Then I found some CSS in `typeahead-browse.css` and completely flailed around until realizing that particular CSS only gets loaded when hitting the typeahead endpoint directly. Copied the relevant bit of CSS over to `main-menu-view.css` (but maybe it should be removed from `typeahead-browse.css`?).
This is my first JS/CSS change, so please don't assume I did anything right.
Test Plan: {F4975800}
Reviewers: #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: epriestley
Maniphest Tasks: T6906
Differential Revision: https://secure.phabricator.com/D18017
Summary: Grep for phui-tag-shade and verify we're no longer calling shade-color directly.
Test Plan: Search, workboard, story points, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17993
Summary: Ref T12733. When an inline is selected, make it stand out so you can see where you are in the document more clearly.
Test Plan: {F4968509}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17982
Summary: Ref T12733. Show a "reply" icon for replies, and make them stack directly under their parent.
Test Plan: {F4968500}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17981
Summary: Ref T12733. Shows a comment snippet when hovering inlines in the objective list.
Test Plan: {F4968490}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17980
Summary: Ref T12733. Currently, creating a new inline and then canceling it leaves a marker in the objective list. Instead, remove the marker.
Test Plan:
- Created an empty inline, cancelled. Created a non-empty inline, cancelled. No objective marker in either case.
- Created a new normal inline, objective marker.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17979
Summary:
Ref T12733. When creating a new comment, the objective could appear to far up in the scrollbar because we were anchoring it to an invisible row.
Instead, anchor to the "edit" row while editing.
Test Plan: Created a new comment at the very top of a file, saw "File, Star" icons instead of "Star, File".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17978
Summary:
Ref T12733.
- While editing a comment, show a pink star ({icon star, color=pink}) with a tooltip.
- Slight UI tweaks, including draft comments getting an indigo pencil ({icon pencil, color=indigo}).
Test Plan: {F4968470}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17977
Summary: Ref T12733. Currently, long filenames get cut off at 160px. Instead, don't cut them off.
Test Plan:
Before:
{F4968401}
After:
{F4968402}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17975
Summary:
Ref T12733. In the longer run I'd like to just push this out from the edge, but that currently gets us into trouble since we start bumping into content. On my system, the trackpad scrollbar also expands in size when moused over, so the minimum number of pixels we need to push it out is approximatley 15px. This hits body content and the persistent chat.
For now, just disable this element on trackpad systems.
Test Plan:
Disconnected all USB peripherals, quit and relaunched Safari, saw no objective list.
Reconnected mouse, relaunched Safari, saw objective list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17974
Summary: See D17955.
Test Plan: Loaded a revision, no longer saw annotations with prototypes off. Still saw annotations with prototypes on.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17983
Summary:
Ref T12733. Currently, we detect the changeset which is in the middle of the screen as the current changeset.
This doesn't always get us the most intuitive changeset, particularly after a navigation from the scroll objective list: when you jump to changeset "X", you'd tend to expect "X" to be shown in the header, but the //next// changeset may be shown if "X" is too short.
Instead, select the changeset near the top of the screen (spanning an invisible line slightly below the banner).
Test Plan: Scrolled and jumped through a document with long and short changesets, saw a more intuitive changeset selected by the banner.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17976
Summary:
Minor UI tweaks:
- Use the dynamic icon for each file (e.g., image, text), not a hard-coded icon.
- Render the path (less important) in grey and the filename (more important) in black.
Test Plan: {F4966176}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17957
Summary:
Add important objectives (like waygates and quest markers) to the minimap.
This also probably fixes @cspeckmim's bug with the {key @} keyboard shortcut.
Test Plan:
(This is probably easier to undestand if you `arc patch` + click around.)
{F4966037}
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: cspeckmim
Differential Revision: https://secure.phabricator.com/D17955
Summary:
Fixes T1591. This was removed long ago because it was a mess to implement and caused a bunch of weird issues, and also my tolerance for dealing with weird JS issues was much, much lower.
I have now survived the fires of JX.Scrollbar and would love to address 200 small nitpicks about obscure browser behaviors on Linux, so open the floodgates again.
A secondary goal here is to create room to add a global view state menu on the right, with 300 options like "hide all inlines", "hide done inlines", "hide collapsed inlines", "hide ghosts", "show ghosts", "enable filetree", "disable filetree", etc, etc. Not sure how much of this I'll actually do. I have one more experiment I want to try first.
Test Plan: {F4963294}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T1591
Differential Revision: https://secure.phabricator.com/D17945
Summary:
Ref T12616. This puts "h" back to collapse or expand the current file.
This removes some very complicated/messy code around following links in the table of contents and getting files auto-expanded. I suspect no one will miss this, but we can restore it if ayone notices.
Test Plan: Pressed "h" to collapse/expand a file. Also used the menu items.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17940
Summary:
Fixes T10563. If you have a thread like this:
```
> A
> B
> C
```
...and you reply to "B", we should put the new inline below "B".
We currently do when you reload the page, but the initial edit goes at the bottom always (below "C").
Test Plan: {F4963015}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10563
Differential Revision: https://secure.phabricator.com/D17938
Summary:
Ref T12616. When you "Delete" a comment from the preview, we try to delete the comment on screen too.
It may or may not be present on screen: if you just added it it's usually visible. However, you might also have hidden the file it contains or it could be on an older diff in a file which is no longer present in the current diff.
After updates in T12616, we could only find the comment if you'd previously interacted with it for some reason. Update this code to be able to find all inlines present in the document.
Test Plan:
- Write a draft comment.
- Reload the page.
- DO NOT INTERACT WITH THE COMMENT!
- Delete it from the preview.
- After patch: Comment is deleted from the document, too.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17937
Summary:
Fixes T11662. In the very obscure situation described in that task, quiet a JS console warning.
The actual edit operation appears to work correctly after changes elsewhere.
There aren't really any legitimate lines for us to highlight in this case so I'm just giving up rather than trying to do something approximate.
Test Plan:
- Wrote `long.txt`.
- Created revision.
- Added an inline near the bottom.
- Removed most of `long.txt`.
- Updated revsion.
- Replied to the ghost inline.
- Edited the reply to the ghost inline, worked.
- Hovered the reply to the ghost inline: no line highlight, but no errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11662
Differential Revision: https://secure.phabricator.com/D17930
Summary: Fixes T1026. Ref T12616. Allows drag-to-select on devices to add inlines on a range of lines, using dark magic that I copy/pasted from StackOverflow.
Test Plan: Left a comment on a range of lines on iPhone simulator.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T1026
Differential Revision: https://secure.phabricator.com/D17928
Summary: Ref T12616. This makes line range selection use the new code, and removes the remainder of the old "hover a line number" / "select a line range" code.
Test Plan: Hovered line numbers; selected line ranges.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17927
Summary:
Ref T11401. Fixes T5232. Ref T12616.
Partly, this moves more code over to the new stuff.
This also allows "r" to work if you have code selected (not just comments). If you "reply" to code, you start a new comment.
You can "R" a comment to quote it. This just starts a new comment normally if you "R" a block of code. This is sort of a power-user version of "quote" since it seems like it probably doesn't really make sense to put it in the UI ever (maybe).
With the new click-to-select, you can click + "R" to reply-with-quote.
Test Plan: Used "r" and "R" to reply to comments and code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T11401, T5232
Differential Revision: https://secure.phabricator.com/D17920
