Summary: Ref T13546. Companion change to D21372. Move URI normalization code to Arcanist to we can more-often resolve remote URIs correctly.
Test Plan: Grepped for affected symbols.
Maniphest Tasks: T13546
Differential Revision: https://secure.phabricator.com/D21373
Summary:
See PHI1794, which describes a connection exhaustion issue with a large number of webhook tasks in queue.
The "GlobalLock" mechanism manages a separate connection pool from the main pool, and webhook workers immediately try to grab a webhook lock with a 0-second wait when they start. So far, this is fine.
Prior to this change, good connections which fail to acqiure a lock are discarded. This can lead to connection exhaustion as the worker rapidly cycles through lock attempts: the connections will remain open for at least 60 seconds (since D16389) in an effort to avoid outbound port exhaustion, but they're effectively orphaned because they aren't part of the main pool and aren't part of the lock pool. We're basically leaking a connection every time we fail to lock.
Failing to lock doesn't mean we need to discard the connection: it's a completely suitable connection for reuse. Instead of dropping it on the floor, put it into the lock pool.
Test Plan:
- Used "bin/webhook call ... --count 10000 --background" to queue a large number of webhook calls against a slow ("sleep(15);") webhook.
- Used "bin/phd launch 32 taskmaster" to start taskmasters.
- Observed MySQL connection behavior:
- Before change: 2048 configured connections immediately exhausted.
- After change: connections stable at ~160ish.
- Ran queue for a while, saw expected single-threaded calls to webhook.
Differential Revision: https://secure.phabricator.com/D21369
Summary:
See PHI1794, which reports an issue where a large number of queued webhook calls led to connection exhaustion. To make this easier to reproduce and test, add "--count" and "--background" flags to "bin/webhook call".
This primarily supports "bin/webook call ... --background --count 10000" to quickly fill the queue with a bunch of calls.
Test Plan: Ran `bin/webhook call` in foreground and background modes, with and without counts. Saw appropriate console and queue behavior.
Differential Revision: https://secure.phabricator.com/D21368
Summary:
The "Export Data" workflow incorrectly uses the "Policy Favorites" setting to choose a default export format. This is just a copy/paste error; the correct setting exists and is unused.
If the setting value is an array (as the "Policy Favorites" value often is), we try to use it as an array index. This generates a runtime exception after D21044.
```
[2020-06-16 06:32:12] EXCEPTION: (RuntimeException) Illegal offset type in isset or empty at [<arcanist>/src/error/PhutilErrorHandler.php:263]
#0 <#2> PhutilErrorHandler::handleError(integer, string, string, integer, array) called at [<phabricator>/src/applications/search/controller/PhabricatorApplicationSearchController.php:460]
```
- Use the correct setting.
- Make sure the value we read is a string.
Test Plan:
- Used "Export Data" with a nonempty, array-valued "Policy Favorites" setting.
- Before: runtime exception.
- After: clean export.
- Used "Export Data" again, saw my selection from the first time persisted.
Differential Revision: https://secure.phabricator.com/D21361
Summary: Ref T13546. This makes some "arc" tasks a little easier, and will make them more correct if "arc" ever switches to using SSH.
Test Plan: Ran "harbormaster.buildable.search" from the web UI, saw URIs in the result set.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13546
Differential Revision: https://secure.phabricator.com/D21346
Summary:
See <https://discourse.phabricator-community.org/t/bad-regex-in-prose-diff-logic/3969>.
The prose splitting rules normally guarantee that newlines appear only at the beginning or end of blocks. However, if a prose sentence ends with text like "...x\n.", we can end up with a newline inside a "sentence".
If we do, the regular expression that breaks it into pieces will fail.
Arguably, this is an error in how sentences are split apart (we might prefer to split this into two sentences, "x\n" and ".", rather than a single "x\n." sentence) but in the general case it's not unreasonable for blocks to contain newlines, so a simple fix is to make the pattern more robust.
Test Plan: Added a failing test which includes this behavior, made it pass.
Differential Revision: https://secure.phabricator.com/D21295
Summary:
Currently, Phortune attempts to prevent users from removing themselves as account managers. It does this by checking that the new list includes them.
Usually this is sufficient, because you can't normally edit an account unless you're already a manager. However, we get the wrong result (incorrect rejection of the edit) if the actor is omnipotent and the acting user was not already a member.
It's okay to edit an account into a state which doesn't include you if you have permission to edit the account and aren't already a manager.
Specifically, this supports more formal tooling around staff modifications to billing accounts, where the actor has staff-omnipotence and the acting user is a staff member and only used for purposes of leaving a useful audit trail.
Test Plan: Elsewhere, ran staff tooling to modify accounts and was able to act as "alice" to add "bailey", even though "alice" was not herself a manager.
Differential Revision: https://secure.phabricator.com/D21288
Summary:
Ref T13513. An inline is not considered empty if it has a suggestion, but some of the shared transaction code doesn't test for this properly.
Update the shared transaction code to be aware that application comments may have more complex emptiness rules.
Test Plan:
- Posted an inline with only an edit suggestion, comment went through.
- Tried to post a normal empty comment, got an appropriate warning.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21287
Summary:
Ref T13541. The passthru future does not have time limit behavior, so if we reach this code we currently fail.
Phabricator never reaches this code normally, but this code is reachable during debugging if you try to foreground a slow fetch to inspect it.
Passthru commands generally only make sense to run interactively, and the caller or control script can enforce their own timeouts (usually by pressing "^C" with their fingers).
Test Plan: Used a debugging script to run ref-by-ref fetches in the foreground.
Maniphest Tasks: T13541
Differential Revision: https://secure.phabricator.com/D21284
Summary:
See PHI1752.
- Early exit of document layout can cause us to fail to populate available rows.
- Some Jupyter documents have "markdown" cells with plain strings, apparently.
Test Plan: Successfully rendered example diff from PHI1752.
Differential Revision: https://secure.phabricator.com/D21285
Summary:
Ref PHI1749. Instead of opening files to the last unchanged line on either side of the change, open files to the "simple" line number of the selected block.
For inlines, this is the inline line number.
For blocks, this is the first new-file line number, or the first old-file line number if no new-file line number exists in the block.
This may not always be what the user is hoping for (we can't know what the state of their working copy is) but should produce more obvious behavior.
Test Plan:
- In Diffusion, used "Open in Editor" with and without line selections. Saw same behavior as before.
- Used "n" and "r" to leave an inline with the keyboard, saw same behavior as before.
- Used "\" and "Open in Editor" menu item to open a file with:
- Nothing selected or changeset selected (line: 1).
- An inline selected (line: inline line).
- A block selected (line: first line in block, per above).
Differential Revision: https://secure.phabricator.com/D21282
Summary: Ref T13276. Ref T13513. All readers and writers were removed more than a year ago; clean up the last remnants of this table.
Test Plan: Grepped for table references, found none.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13513, T13276
Differential Revision: https://secure.phabricator.com/D21281
Summary:
Ref T13513. Syntax highlighting is potentially expensive, and the changeset rendering pipeline can cache it. However, the cache is currently keyed ONLY by Differential changeset ID.
Destroy the existing cache and rebuild it with a more standard cache key so it can be used in a more ad-hoc way by inline suggestion snippets.
Test Plan: Used Darkconsole, saw cache hits and no more inline syntax highlighting for changesets with many inlines.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21280
Summary: Ref T13513. Inline comment context information is somewhat expensive to construct and can be cached. Add a readthrough cache on top of it.
Test Plan: Loaded a source code changeset with many inline comments, used Darkconsole to inspect query activity. Saw caches get populated. Updated cache key, saw caches regenerate. Browsed Diffusion, nothing looked broken.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21279
Summary: Ref T13513. For now, I'm not supporting inline edit suggestions in Diffusion, although it's likely not difficult to do so in the future. Clean up some of the code so that plain ol' inlines work the same way they did before.
Test Plan:
- Created, edited, reloaded, submitted inlines in Diffusion: familiar old behavior.
- Created, edited, reloaded, submitted inlines with suggestions in Differential: familiar new behavior.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21278
Summary: Ref T13513. When rendering an inline suggestion for display, use highlighting and diffing.
Test Plan: {F7495053}
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21277
Summary:
Ref T13513. This still has quite a few rough edges and some significant performance isssues, but appears to mostly work.
Allow reviewers to "Suggest Edit" on an inline comment and provide replacement text for the highlighted source.
Test Plan: Created, edited, reloaded, and submitted inline comments in various states with and without suggestion text.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21276
Summary: Ref T13513. Introduce a formal server-side content state object so the whole state can be saved and restored to the drafts table, read from the request, etc.
Test Plan: Created and edited inlines. Reloaded drafts with edits. Submitted normal and editing comments. Grepped for affected symbols.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21275
Summary:
Ref T13513. If your 10 most recently authored inlines have all been deleted, these queries can fail by overheating. This is silly and probably rarely happens outside of development.
For now, just let them overheat. This may create a false negative (incorrect "no draft" signal when the real condition is "drafts, but 10 most recent comments were deleted"). This could be sorted out later with a query mode like "executeAny()", perhaps.
Test Plan:
- Created and deleted 10 inlines.
- Submitted comments.
- Before: overheating fatal during draft flag generation.
- After: clean submission.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21274
Summary:
Ref T13513. Currently, all the inline code passes around strings to describe content. I plan to add background music, animation effects, etc., soon. To prepare for this change, make content a state object.
This does not change any user-visible behavior, it just prepares for content to become more complicated than a single string.
Test Plan: Created, edited, submitted, cancelled, etc., comments.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21273
Summary: See PHI1745. Under PHP7, errors raised as Throwable miss this "generic exception" logic and don't increment their failure count. Instead, treat any "Throwable" we don't recognize like any "Exception" we don't recognize.
Test Plan:
- Under PHP7, caused a worker task to raise a Throwable (e.g., call to undefined method, see D21270).
- Ran `bin/worker execute --id ...`.
- Before: worker failed, but did not increment failure count.
- After: worker fails and increments failure count as it would for other types of unknown error.
Differential Revision: https://secure.phabricator.com/D21271
Summary: See PHI1745. This callsite for "ChangesetParser" was not properly updated for recent changes.
Test Plan:
- Set `metamta.differential.inline-patches` to 100.
- Created a new revision with a small (<100 line) diff, with at least one reviewer.
- Ran `bin/phd debug` and observed outbound mail queue with `bin/mail list-outbound`.
- Before: fatal when trying to generate the inline changes for mail.
- After: clean mail generation.
Differential Revision: https://secure.phabricator.com/D21270
Summary: See PHI1743. If a build has no initiator PHID, the rendering pathway incorrectly tries to access a handle for it anyway.
Test Plan:
- Set a build to have no initiator PHID.
- Viewed the build plan for the build.
- Before: fatal when trying to access the `null` handle.
- After: clean build plan rendering.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D21269
Summary:
Fixes T13539. See that task for discussion and a reproduction case.
This algorithm currently counts "\ No newline at end of file" lines as though they were normal source lines. This can cause offset issues in the rare case that a diff contains two of these lines (for each side of the file) and has changes between them (because the last line of the file was modified between the diffs).
Instead, don't count "\" as a display line.
Test Plan:
- See T13539 and PHI1740.
- Before: got fatals on the "wild" diff and the synthetic simplified version.
- After: clean intradiff rendering in both cases.
Maniphest Tasks: T13539
Differential Revision: https://secure.phabricator.com/D21267
Summary:
Ref T13538. See PHI1739. Synthetic Git commits with no author and/or no commit message currently extract `null` and then fail to parse.
Ideally, we would carefully distinguish between `null` and empty string. In practice, that requires significant schema changes (these columns are non-nullable and have indexing requirements) and these cases are degenerate. These commits are challenging to build and can not normally be constructed with `git commit`.
At least for now, merge the `null` cases into the empty string cases so we can survive import.
Test Plan:
- Constructed a commit with no author and no commit message using the approach described in T13538; pushed and parsed it.
- Before: fatals during identity selection and storing the commit message (both roughly NULL inserts into non-null columns).
- After: clean import.
This produces a less-than-ideal UI in Diffusion, but it doesn't break anything:
{F7492094}
Maniphest Tasks: T13538
Differential Revision: https://secure.phabricator.com/D21266
Summary:
Fixes T13536. See that task for discussion.
Older versions of MySQL (roughly, prior to 8.0.19) emit "int(10)" types. Newer versions emit "int" types. Accept these as equivalent.
Test Plan: Ran `bin/storage upgrade --force` against MySQL 8.0.11 and 8.0.20. Got clean adjustment lists on both versions.
Maniphest Tasks: T13536
Differential Revision: https://secure.phabricator.com/D21265
Summary: On the "New User" web workflow, if you use an invalid email address, you get a failure with an empty message.
Test Plan:
- Before: Tried to create a new user with address "asdf". Got no specific guidance.
- After: Got specific guidance about email address formatting and length.
Differential Revision: https://secure.phabricator.com/D21264
Summary:
Ref T13529. Now that instances can be renamed, an instance may have multiple valid SSH usernames and the preferred SSH username may not be the intenal instance name.
`PhacilitySiteSource` should already always set `diffusion.ssh-username` correctly, to the current preferred SSH username (which may be "new-name" after a rename from "old-name"), so we should never be able to reach this code without an accurate `diffusion.ssh-username` value available.
The code to resolve names into instances also already works for both "ssh old-name@..." and "ssh new-name@...".
So I believe this code has no beneficial effects and only causes harm: it may force us to return "old-name" when falling through would correctly return "new-name".
Test Plan:
- Previously: renamed an instance, then SSH'd to it using both the old and new names. Both work.
- Previously: verified that `diffusion.ssh-username` is set correctly after a rename.
- Verified that Diffusion "Clone" UI now shows "new-name" after an instance rename.
- The real question here is: does this break something I'm not thinking of? And the change probably has to go to production to answer that.
Maniphest Tasks: T13529
Differential Revision: https://secure.phabricator.com/D21259
Summary:
Ref T13513. The way I'm highlighting lines won't work for Jupyter notebooks or other complex content blocks, and I don't see an obvious way to make it work that's reasonably robust.
However, we can just ignore the range behavior for complex content and treat the entire block as selected. This isn't quite as fancy as the source behavior, but pretty good.
Also, adjust unified diff behavior to work correctly with highlighting and range selection.
Test Plan:
- Used range selection in a Jupyter notebook, got reasonable behavior (range is treated as "entire block").
- Used range selection in a unified diff, got equivalent behavior to 2-up diffs.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21257
Summary:
Ref T13513. Give selected inlines a selection state and visual cues which are similar to the changeset selection state.
Also fix a couple of minor issues with select interactions and offset comments.
Test Plan: Selected inlines, saw obvious visual cues.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21256
Summary:
Ref T13513. When a user selects a text range and uses "New Inline Comment" to create a comment directly from a range, store the offset information alongside the comment.
When hovering the comment, highlight the original range.
Test Plan: {F7480926, size=full}
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21250
Summary: Ref T13513. Support direct text selection for inlines. This is currently just an alternate way to get to the same place as using line numbers, but can preserve offset/range information in the future.
Test Plan:
- Selected some text, hit "c", clicked "New Inline Comment", got sensible comments on both sides of a diff in Safari, Chrome, and (with limitations) Firefox.
- Caveats: no unified support, doesn't work across lines in Firefox.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21248
Summary: Ref T11401. Ref T13513. This paves the way for more comment actions, particularly an edit-after-submit action.
Test Plan: Took all actions from menus, via mouse and via keyboard (where applicable).
Maniphest Tasks: T13513, T11401
Differential Revision: https://secure.phabricator.com/D21244
Summary:
Ref T13454. See <https://discourse.phabricator-community.org/t/newly-created-ssh-private-keys-with-passphrase-not-working-anymore/3883>.
After changes to distinguish between invalid and passphrase-protected keys, SSH private key management code incorrectly uses "-y ..." ("print public key") when it means "-p ..." ("modify input file, removing passphrase"). This results in the command having no effect, and Passphrase stores the raw input credential, not the stripped version.
We can't recover the keys because we don't store the passphrase, so no migration here is really possible. (We could add more code to detect this case, but it's presumably rare.)
Also, correct the behavior of the "Show Public Key" action: this is available for users who can see the credential and does not require edit permission.
Test Plan:
- Created a new credential with a passphrase, then showed the public key.
Maniphest Tasks: T13006, T13454
Differential Revision: https://secure.phabricator.com/D21245
Summary:
Ref T13513. Currently, viewing a Jupyter document, hidden context just gets a plain "* * *" facade with no way to expand it.
Support click-to-expand, like source changes.
Test Plan:
- Clicked to expand various Jupyter diffs.
- Clicked to expand normal source changes.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21243
Summary:
Ref T13513. If you leave an inline on line 20 of a Jupyter document, we currently render context around *raw* line 20, which is inevitably some unrelated piece of JSON.
Instead, drop this context. (Ideal behavior would be to render context around Jupyter block 20, but that's a whole lot of work.)
Test Plan:
- On Jupyter changes and normal source changes, made and submitted inline comments, then viewed text and HTML mail.
- Saw no context on Jupyter comments (instead of bad context), and unchanged behavior (useful context) on normal source changes.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21242
Summary:
Ref T13513. Currently, "View as Document Type..." lists every available engine.
This is hard to get completely right because we can't always rebuild the document ref accurately in the endpoint, but try harder to fake something reasonable.
Test Plan: Used "View as Document Type..." on Jupyter notebooks, was given "Jupyter" and "Source" as options.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21241
Summary:
Ref T13513. As part of inline metadata, save the document engine the change is being rendered with.
This will allow other parts of the UI to detect that an inline was created on a Jupyter notebook but is being rendered on raw source, or whatever else.
The immediate goal is to fix nonsensical inline snippet rendering in email on Jupyter notebooks.
Test Plan:
- Created inlines and replies on normal soure code, saw no document engine annotated in the database.
- Created inlines and replies on a Jupyter notebook rendered in Jupyter mode, saw "jupyter" annotations in the database.
- Swapped document engines between Jupyter and Source, etc.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21240
Summary:
Ref T13513. If an intradiff has at least one unchanged file ("hasSameEffectAs()") or more than 100 files ("Large Change"), we hit this block and don't upcast storage inlines to runtime inlines. I missed this in testing.
Add the conversion step.
Test Plan: Viewed an intradiff with at least one unchanged file and at least one inline comment, saw correct rendering instead of fatal.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21239
Summary:
Ref T13513. Currently, clicking "View" from the inline comment preview (below the "add comment" area at the bottom of the page) only works if the inline isn't being edited.
Update this behavior so it works on inlines in either "Viewing" or "Editing" states.
Test Plan:
- Clicked "View" on a normal inline, got jumped/selected.
- Clicked "View" on an editing inline, got jumped/selected.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21237
Summary:
Ref T13513. Currently:
- If you click the "Show Changeset" button, your state change doesn't actually get saved on the server.
- It's hard to select a changeset path name for copy/paste because the "highlight the header" code tends to eat the event.
Instead: persist the former event; make the actual path text not be part of the highlight hitbox.
Test Plan:
- Clicked "Show Changeset", reloaded, saw changeset visibility persisted.
- Selected changeset path text without issues.
- Clicked non-text header area to select/deselect changesets.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21236
Summary:
Ref T13513. Currently, if you:
- click a line to create an inline;
- type some text;
- wait a moment; and
- close the page.
...you don't get an "Unsubmitted Draft" marker in the revision list.
Lift all the draft behavior to "InlineController" and make saving a draft dirty the overall container draft state.
Test Plan:
- Took the steps described above, got a draft state marker.
- Created, edited, submitted, etc., inlines in Diffusion and Differential.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21235
Summary: Ref T13513. All queries now go through a reasonably minimal set of pathways and should have consistent behavior.
Test Plan:
- Loaded a revision with inlines.
- Created a new empty inline, reloaded page, saw it vanish.
- Created a new empty inline, typed draft text, did not save, reloaded page, saw draft present.
- Created a new empty inline, typed draft text. Submitted feedback, got prompt, answered "Y", saw draft text submit.
- Created a new empty inline, typed draft text, scrolled down to bottom of page, typed non-draft text, saw preview include draft text.
- Marked and submitted "Done".
- Used hide/show on inlines, verified state persisted.
- Did much of the same stuff in Diffusion, where it all works the same way (except: there's no prompt when submitting draft is-editing inlines).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21234
Summary: Ref T13513. Replaces "DifferentialInlineCommentQuery" with the similar but more modern "DifferentialDiffInlineCommentQuery".
Test Plan: Viewed comments in timeline, changesets. Created, edited, and submitted comments. Hid and un-hid comments, reloading (saw state preserved).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21233
Summary: Ref T13513. Continue removing usage sites for the obsolete "DifferentialInlineCommentQuery".
Test Plan: Viewed the inline list in Differential, saw sensible inlines.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21232
Summary: Ref T13513. Move querying to "DiffInlineCommentQuery" classes and lift them into the base Controller.
Test Plan: In Differential and Diffusion, created, edited, and submitted inline comments.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21231
Summary: Ref T13513. Another step closer to the light.
Test Plan: Created, edited, deleted, replied to, and submitted inline comments in Diffusion.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21230
Summary: Ref T13513. Continue marching toward coherent query pathways for all access to inline comments.
Test Plan:
- Viewed a commit and a path within that commit, as a user with unpublished inlines and a different user.
- Saw appropriate inlines in all cases (published inlines, plus undeleted unpublished inlines authored by the current viewer).
- Grepped for "loadDraftAndPublishedComments()".
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21228
Summary:
Ref T13513. Improve consistency and robustness of the "InlineComment" queries.
The only real change here is that these queries now implicitly add a clause for selecting inlines ("pathID IS NULL" or "changesetID IS NULL").
Test Plan: Browed, created, edited, and submitted inlines.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21227
Summary:
Ref T13513. Currently, inline storage objects ("TransactionComment") can't directly generate a runtime object ("InlineComment").
Allow this transformation to be performed in a genric way so clunky code which does it per-object-type can be removed, lifted, or simplified.
Simplify an especially gross callsite in preview code.
Test Plan: Previewed inline comments.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21226
Summary: Ref T13513. See that task for some discussion. This prepares to lift "loadUnsubmittedInlineComments(...)" into shared code.
Test Plan: Grepped for callers, found none in the upstream. This is a backward compatibilty break. See T13513.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21225
Summary: Ref T13513. This controller was obsoleted by EditEngine and appears unreachable without explicitly typing the URL.
Test Plan:
- Grepped for the route, didn't find any hits.
- Deleted the controller, successfully previewed comments in Diffusion.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21224
Summary:
Ref T13519. This is a little fuzzy, but I think the workflow here is:
- View an intradiff, generating an ephemeral comparison changeset with no changeset ID. This produces a state key of "*".
- Apply "hidden" state changes to the changeset.
- View some other intradiff and/or diff view.
- The code attempts to use "*" as a changset ID?
I'm not entirely sure this is accurate; this was observed in production and I couldn't get a clean reproduction case locally.
Optimistically, try making changeset IDs explicit rather than relying on state keys to be "usually changeset-ID-like".
Test Plan: Used "hidden" locally across multiple intradiffs, but I wasn't cleanly able to reproduce the initial issue.
Maniphest Tasks: T13519
Differential Revision: https://secure.phabricator.com/D21223
Summary: Ref T13523. If a file hasn't been touched in the newer changeset, we can currently hit an error in the interdiff.
Test Plan:
- Touched "moo.txt" in Diff 1.
- Reverted the changes to "moo.txt" in Diff 2.
- Diffed 2 vs 1.
- Before patch: fatal (call to getFilename() on null).
- After patch: clean interdiff.
Maniphest Tasks: T13523
Differential Revision: https://secure.phabricator.com/D21220
Summary:
Ref T13513. Overloading "original text" to get "edit-on-load" comments into the right state has some undesirable side effects.
Instead, provide the text when the editor opens. This fixes a cancel interaction.
Test Plan:
- Create an inline, type text, don't save.
- Reload page.
- Cancel.
- Before: cancelled into empty state.
- After: cancelled into deleted+undo state.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21219
Summary: Ref T13513. When users choose to publish inlines, we want to publish the visible text, not the last "checkpointed" state.
Test Plan:
- Created an inline ("AAA").
- Edited it into "BBB", did not save.
- Submitted.
- Confirmed that I want to publish the unsaved inline.
- Saw "BBB" publish.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21218
Summary:
Ref T13513. As users type text into inline comments, save the comment state as a draft on the server.
This has some rough edges, particularly around previews, but mostly works. See T13513 for notes.
Test Plan: Started an inline, typed some text, waited a second, reloaded the page, saw an editing inline with the saved text.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21216
Summary: Ref T13513. When computing whether a revision has draft comments or not, ignore empty inlines.
Test Plan: Added empty inlines to a revision, no longer saw a yellow "draft" bubble in the list UI.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21215
Summary: Ref T13513. When you load a changeset, discard all empty inlines. This is likely a more desirable behavior than keeping empty editors around, even though the rest of the pipeline generally handles them fairly well now.
Test Plan:
- Started an inline, didn't type any text or save, reloaded page.
- Before: page restores empty editor in the same place.
- After: we just discard this likely-pointless empty inline.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21214
Summary: Ref T13513. Refine some inline behaviors, see test plan.
Test Plan:
- Edit a comment ("A"), type text ("AB"), cancel, edit.
- Old behavior: edit and undo states (wrong, and undo does not function).
- New behavior: edit state only.
- Edit a comment ("A"), type text ("AB"), cancel. Undo ("AB"), cancel. Edit.
- Old behavior: "AB" (wrong: you never submitted this text).
- New behavior: "A".
- Create a comment, type text, cancel.
- Old behavior: counter appears in filetree (wrong, comment is undo-able but should not be counted).
- New behavior: no counter.
- Cancel editing an empty comment with no text.
- Old behavior: Something buggy -- undo, I think?
- New behavior: it just vanishes (correct behavior).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21212
Summary:
Ref T13513. Currently, if you start an inline and then submit overall comments, we publish an empty inline. This is literally faithful to what you did, but almost certainly not the intent.
Instead, simply ignore empty inlines at publishing time (and ignore "done" state changes for those comments).
We could delete them outright, but if we do, they'll break if you have another window open with the empty inline (since the stored comment won't exist anymore). At least for now, leave them in place.
Test Plan: Created empty inlines, submitted comments, no longer saw them publish.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21211
Summary: Ref T13513. This slightly expands the existing-but-hacky "warning" workflow to cover both "mentions on draft" and "submitting inlines being edited".
Test Plan:
- Submitted changes to a revision with mentions on a draft, inlines being edited, both, and neither.
- Got sensible warnings in the cases where warnings were appropriate.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21191
Summary:
Ref T13513. If you submit top-level comments while an inline comment editor is open, kick the comment out of the editing state.
(An improvement to this behavior would be to warn the user that we're going to do this first, but this is currently less straightforward.)
Test Plan:
- Clicked a line number to create an inline.
- Type text, save, click edit.
- (Optional: reload page.)
- Save changes overall using the form at the bottom of the page.
- Outcome: published inline is no longer in an "editing" state.
Weirdness:
- If you click a line number (and, optionally, type text), then submit without using "Save", the server-side version of the inline has no content.
- This gives you a no-effect warning. Instead, these inlines should probably just be marked as deleted somewhere in the pipeline.
- This saves the last "Saved" copy of the inline. That's (probably?) desired, but somewhat destructive without a warning.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21188
Summary:
Ref T13513. Now that the "currently being edited" state of inlines is saved on the server side, clear the flag when the user clicks "Cancel" to leave the "editing" state on the client.
This also serves to delete empty comments.
Test Plan:
- Clicked a line number to create a new comment. Then:
- Clicked "Cancel". Reloaded page, saw no more comment.
- Typed text, saved. Reloaded page, saw non-editing draft. Clicked "Edit", reloaded page, saw editing draft. Clicked "Cancel", reloaded page, saw non-editing draft.
- Typed text, saved. Clicked "Edit", deleted text, saved. Reloaded page, saw no more comment.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21187
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
Summary: Ref T13513. This plans for "currently editing", character range comments, code suggestions, document engine tracking. And absolutely nothing else.
Test Plan:
- Ran `bin/storage upgrade -f`, got a clean upgrade.
- Created and submitted some inline comments; nothing exploded.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21184
Summary:
At some point, the highlighting behavior for the timeline broke. When you follow a link to a particular timeline story, the story should be highlighted.
Prior to this change, the `<a />` tag itself highlights, but there's no associated CSS and it's too deep in the tree to do anything useful.
(Since this change is fairly straightforward, I gave up digging for the root cause before finding it.)
Test Plan:
- Clicked a timeline story anchor, saw the story highlight.
Differential Revision: https://secure.phabricator.com/D21213
Summary:
Ref T13523. In the caching layer, there's a tricky clause about filetypes that skips some body rendering behavior.
Provide file type information which at least has a better chance of representing all changes (e.g., an image file may be replaced with a text file, but this can not be represented by a single file type).
Formalize "hasSourceTextBody()", to mean the changeset parser should engage the change as source text.
Test Plan: Intradiffed text changes, saw the body render properly.
Maniphest Tasks: T13523
Differential Revision: https://secure.phabricator.com/D21210
Summary: Fixes T13530. The block parser could match too many lines in an unterminated "%%%" literal block. Adjust the logic to stop doing this (and hopefully be a little easier to read).
Test Plan: Added a failing test, made it pass.
Maniphest Tasks: T13530
Differential Revision: https://secure.phabricator.com/D21208
Summary:
See PHI1722, which requests transaction details about reviewer changes.
This adds them; they're structured to be similar to "projects" and "subscribers" transactions and the "reviewers" attachment on revisions.
Test Plan: {F7410675}
Differential Revision: https://secure.phabricator.com/D21207
Summary: This supports the IntelliJ IDEA editor.
Test Plan:
- Looked at the editor settings panel, saw "idea://".
- Set my editor pattern to "idea://a?b".
- (Did not actually install IntelliJ IDEA.)
Differential Revision: https://secure.phabricator.com/D21206
Summary: Ref T13528. Now that we're hinting users into Files, put the content first and move the detail panel under it. Move the most-useful details (author, size, dimensions) into the curtain.
Test Plan: {F7409925}
Maniphest Tasks: T13528
Differential Revision: https://secure.phabricator.com/D21201
Summary:
Ref T13528. The original rationale here was that it's easier to find items at the bottom of the curtain than somewhere in the middle, since they're in a more clearly predictable visual location.
This might be true in some sense, but user feedback about this has fairly consistently indicated that the layout is surprising. Try the other order. See also D20967 for some discussion.
In practice, this primarily moves "Author / Assigned" above other panel elements in Maniphest.
Test Plan: Looked at tasks, aw "Author / Assigned" above "Tags / Subscribers".
Maniphest Tasks: T13528
Differential Revision: https://secure.phabricator.com/D21200
Summary:
Ref T13528. Paste data is stored in files, but the files are always named "raw.txt".
Now that Paste provides a hint to use Files for "DocumentEngine" rendering, try to use the same name as the paste instead.
Test Plan:
- Created a paste named "staggering-insight.ipynb".
- Clicked "View as Jupyter Notebook" from Paste.
- Saw a file named "staggering-insight.ipynb", not "raw.txt".
- Created a paste with no name, saw a file named "raw-paste-data.txt" get created.
Maniphest Tasks: T13528
Differential Revision: https://secure.phabricator.com/D21197
Summary: Ref T13528. When a file in Paste (like a Jupyter notebook) has a good/useful document engine, provide a link to Files.
Test Plan: {F7409881}
Maniphest Tasks: T13528
Differential Revision: https://secure.phabricator.com/D21196
Summary:
See PHI1719. User agents making hard-coded requests to "/favicon.ico" currently 404. This is a mild source of log noise, and we can reasonably route this request.
Limitations:
- This only routes the "PlatformSite". Other sites (custom Phame blogs, third-party sites, Phurl redirectors) won't route here for now.
- This returns a "Location:" redirect to the correct resource rather than icon data directly. This produces the right icon with the right caching behavior, and returning icon data directly is difficult in the general case. However, it won't perform/cache as well as a direct response would.
Test Plan:
- Visted `/favicon.ico`.
- Before: 404.
- After: redirect to favicon.
Differential Revision: https://secure.phabricator.com/D21195
Summary:
Ref T13526. Currently, if a build plan is restricted, viewers may fatal when trying to view related builds.
The old behavior allowed them to see the build even if they can not see the build plan. This is sort of incoherent, but try to stabilize things before fixing this.
Test Plan:
This is a muddy change.
- Created a build with a build plan that Alice can't see.
- As Alice, viewed the build page (restricted before, restricted after); the buildable page (fatal before, works after).
- Also viewed a revision page (works before and after, but user-reported fatal).
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13526
Differential Revision: https://secure.phabricator.com/D21194
Summary:
See PHI1714. This code is incorrectly rendering the chart panel twice, sort of, and passing a non-View object to rendering.
After D21044, this fatals by raising an exception in rendering.
Test Plan: Loaded page, no more exception.
Differential Revision: https://secure.phabricator.com/D21185
Summary:
Ref T13520. Generally, make the table of contents look and more like the paths panel:
- Show a hierarchy, with compression for single-sibling children.
- Use the same icons, instead of "M D" and "(img)" stuff.
- Use EditDistanceMatrix to do a piece-by-piece diff of paths changes.
- Show path changes within the path list.
I'm not entirely sold on this, but it was complicated to write and I've never heard the term "sunk cost fallacy". I think this is mostly a net improvement, but may need some adjustments and followup.
Test Plan: Viewed various changes in Differential and Diffusion, saw a more usable table of contents.
Maniphest Tasks: T13520
Differential Revision: https://secure.phabricator.com/D21183
Summary:
See <https://discourse.phabricator-community.org/t/runtimeexception-during-import-of-commit/3801>. When importing commits with "Auditors:", a raw transaction new value (with an edge edit map using a "+" key) may be passed as an unmentionable PHID list.
Instead, pass an actual PHID list.
Test Plan:
- Pushed a commit with "Auditors: duck".
- Ran daemons.
- Before patch: umentionable PHID exception.
- After patch: clean commit import.
- Verified "duck" was added as an auditor.
Differential Revision: https://secure.phabricator.com/D21181
Summary:
Ref T13523. Currently, when building a "comparison" changeset, metadata is taken from the left changeset. This is somewhat arbitrary.
This means that intradiffs of images don't work properly because the rendered changeset has only the left (usually "old") information.
Later, some of the code attempts to ignore the file data stored on the changeset and reconstruct the correct file data, which is how the result ends up not-completely-wrong.
Be more careful about building sensible-ish metadata, and then just use it directly later on. This fixes the "spooky" code referencing D955 + D6851.
There are some related issues, where "change type" and "file type" are selected arbitrarily and then used to determine whether the change has an "old/new" state or not (i.e., is the left side of the diff empty, since the change creates the file)?
In many cases, neither of the original changesets have a "change type" which will answer this question correctly. Separate this concept from "has state" from "change type", and make more of the code ask narrower questions about the specific conditions or states it cares about, rather than "change type".
Test Plan:
- Created a revision with Diff 1, Diff 2, and Diff 3. Diff 1 takes an image from "null -> A". Diff 2 takes the same image from "null -> B". Diff 3 takes the same image from "A -> B'.
- Intradiffed 1v2 and 1v3.
- Before patch:
- Left side usually missing, which is incorrect (should always be "A").
- Change properties are a mess ("null -> image/png" for MIME type, e.g.)
- Uninteresting/incorrect "unix:filemode" stuff.
- After patch;
- Left side shows state "A".
- Change properties only show size changes (which is correct).
{F7402012}
Maniphest Tasks: T13523
Differential Revision: https://secure.phabricator.com/D21180
Summary:
Fixes T13525. Since D21044, the intermittent GC list warnings are treated more severely and can become user-visible errors.
Silence them, since this seems to be the only realistic response in most versions of APC/APCu.
Test Plan: Will deploy.
Maniphest Tasks: T13525
Differential Revision: https://secure.phabricator.com/D21179
Summary:
Ref T13524. If a Harbormaster lint message has no line number (which is permitted), we try to access an invalid index here. This is an exception after D21044.
Treat comments with no line number as unchanged. These comments do not have "ghost" behavior and do not port across diffs.
Test Plan:
- Used "harbormaster.sendmessage" to submit lint with no line number on a changeset.
- Viewed changeset.
- Before patch: "Undefined index: <null>" error.
- After patch: Clean changeset with lint message.
{F7400072}
Maniphest Tasks: T13524
Differential Revision: https://secure.phabricator.com/D21178
Summary:
See PHI1710. Python encodes `True` as `True` (with an uppercase "T") when building URLs.
We currently do not accept this as a "truthy" value, but it's reasonable and unambiguous. Accept "True", "TRUE", "tRuE", etc.
Test Plan: Made a cURL conduit call with "True" and "tRuE". Before patch: failure to decoded booleans; after patch: successful interpretation of "true" variations.
Differential Revision: https://secure.phabricator.com/D21177
Summary: See PHI1710. Until D21044, some transactions could omit "value" and apply correctly. This now throws an exception when accessing `$xaction['value']`. All transactions are expected to have a "value" key, so require it explicitly rather than implicitly.
Test Plan: Submitted a transaction with a "type" but no "value". After D21044, got a language-level exception. After this change, got an explicit exception.
Differential Revision: https://secure.phabricator.com/D21176
Summary: Ref T13522. When changesets update an image, we currently compute no effect hash. A content hash of the image (or other binary file) is a reasonable effect hash, and enalbes effect-hash-based behavior, including hiding files in intradiffs.
Test Plan:
- Created a revision affecting `cat.png` and `quack.txt` (currently, there must be 2+ changesets to trigger the hide logic).
- Updated it with the exact same changes.
- Viewed revision:
- Saw the image renderered in the interdiff.
- Applied patch.
- Ran `bin/differential rebuild-changesets ...`.
- Viewed revision:
- Saw both changesets collapse as unchanged.
Maniphest Tasks: T13522
Differential Revision: https://secure.phabricator.com/D21174
Summary: Ref T13518. See <https://discourse.phabricator-community.org/t/more-exceptions-when-viewing-diffs/3789/>. Under PHP 7.4, accessing an array index of values like `false` and `null` is no longer valid. This is great, but we occasionally do it.
Test Plan:
- Upgraded to PHP 7.4.
- Loaded revisions with added/changed lines, inlines, and Asana support configured.
- Before patch: saw various fatals around accessing indexes of booleans and nulls.
- After patch: clean revision.
Maniphest Tasks: T13518
Differential Revision: https://secure.phabricator.com/D21172
Summary:
Ref T13493. At time of writing, the old API method no longer functions: `1/session` does not return an `accountId` but all calls now require one.
Use the modern `3/myself` API instead. The datastructure returned by `2/user` (older appraoch) and `3/myself` (newer approach) is more or less the same, as far as I can tell.
Test Plan: Linked an account against modern-at-time-of-writing Atlassian-hosted JIRA.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21170
Summary:
Ref T13517. See that task for details about the underlying issue here.
Currently, we may decode a compressed response, then retransmit it with leftover "Content-Encoding" and "Content-Length" headers. Instead, strip these headers.
Test Plan:
- In a clustered repository setup, cloned a Git repository over HTTP.
- Before: Error while processing content unencoding: invalid stored block lengths
- After: Clean clone.
Maniphest Tasks: T13517
Differential Revision: https://secure.phabricator.com/D21167
Summary:
Ref T4369. During T13507, I set my "max_post_size" to a very small value, like 7 (i.e., 7 bytes). This essentially disables "enable_post_data_reading" even if the setting is technically on.
This breaks forms which use "multipart/form-data", which are rare but not nonexistent. Notably, forms in Config use this setting (because of `ui.header` stuff?) although perhaps they should not or no longer need to.
This can be fixed by parsing the raw input.
Since the only reason we don't parse the raw input is concern that we may not be able to read it (per documentation, but never actually observed), and we do a `strlen()` test anyway, just read it unconditionally.
This should fix cases where POST data wasn't read because of "max_post_size" without impacting anything else.
Test Plan: With very small "max_post_size", updated "ui.footer-items" in Config. Before: form acted as a no-op. After: form submitted.
Maniphest Tasks: T4369
Differential Revision: https://secure.phabricator.com/D21165
Summary: Ref T13516. This isn't terribly clean, but get the page footer into the bottom of the content page on FormationView pages so it doesn't overlap into the side panel.
Test Plan: With and without a footer, viewed normal and FormationView pages. Saw footers in appropriate places at appropriate times.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21166
Summary:
Ref T13455. Viewstates are fairly small and will probably grow less quickly than the changeset table, but the data is also not important to retain in the long term: if you revisit a change several months after hiding some files, it's fine if we've forgotten that you adjusted the view parameters.
Add a GC with a long default collection policy (180 days) so installs can manage the size of this table if it becomes necessary.
Test Plan: Ran via `bin/garbage` to adjust the GC policy and collect viewstates.
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21164
Summary: Ref T13516. Hide this UI on devices without the screen width to reasonably support it.
Test Plan: Viewed a revision at various window widths, saw the elements vanish at device widths and reappear at desktop widths.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21162
Summary:
Ref T13516.
- Add an "Add Comment" navigation anchor.
- Make selection state more clear.
- Make hidden state tidier and more clear.
- Hide "View Options" in the hidden state to dodge all the weird behaviors it implies.
- Click to select/deselect changesets.
- When you open the view dropdown menu, then press "h", close the dropdown menu.
Test Plan: Fiddled with all these behaviors.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21161
Summary:
Ref T13516. Minor improvements here:
- Show key commands in the "View Options" dropdown.
- Organize it slightly better.
- Improve disabled item behaviors a little bit.
- Add a "Browse Directory" action.
- Rename "...in Diffusion" to "...in Repository".
- Make "d", "D", and "h" use the same targeting rules as "\".
- When you hide a file with the "h" menu item, select it.
Test Plan: Poked at the menu a lot, ran into less questionable behavior.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21160
Summary: See PHI1707, which has a Jupyter notebook which fails to diff nicely when modified. The root cause seems to be that the document does not end in a newline.
Test Plan: Applied patch, diffed the file, got a Jupyter diff out of it.
Differential Revision: https://secure.phabricator.com/D21159
Summary:
Ref T13455. Make "hidden" a changeset property similar to other changeset properties.
We don't need to render this on the server, so we make a request (to update the setting) and just discard the response.
Test Plan: {F7375468}
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21158
Summary: Ref T13516. Mark low-importance changes (generated code, deleted files) and owned-with-authority changes in the filetree.
Test Plan: {F7375327}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21157
Summary:
Ref T13516. Deletes all old filetree / flex / active / collapse nav code in favor of the new code.
Restores the inline tips in the path tree.
Test Plan: {F7374175}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21154
Summary: Ref T13516. Apply basic UI styling to the new UI and make some more interaction work.
Test Plan: {F7374096}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21153
Summary: Ref T13516. Generate a tree structure based on the page changesets. Still missing styles and a whole lot of behavior.
Test Plan: {F7373967}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21152
Summary: Ref T13516. This glues "FormationView" to "ChangesetList". The actual tree is not functional in any meaningful way yet.
Test Plan: {F7373838}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21151
Summary:
Ref T13516. Currently, the "File Tree" element is a semi-dynamic side panel that's implemented as a special mode of a side nav panel.
This implementation is fairly clunky, and arose from organic growth out of the side nav. As such, it has some weird behaviors, doesn't have builtin support for show/hide, and can't generalize easily.
Introduce a "FormationView" which supports loading a page up with piles of side panels in various modes.
Test Plan: No callers and no user-visible impact.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21150
Summary:
Ref T13515. This restores the "Open in Editor" behavior to Diffusion, and makes "\" work there.
The URI pattern is now sent as a structured template to the client, so the code will work properly if a file path contains "%l".
Test Plan:
- Clicked "Open in Editor" and pressed "\" in Diffusion when viewing a file.
- Clicked a line, hit "\", got the file opened to that line.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21149
Summary: Ref T13515. External editor URIs currently depend on repositories having callsigns, but callsigns are no longer required. Add some variables to support configuring this feature for repositories that do not have callsigns.
Test Plan: Changed settings to use new variables, saw links generate appropriately.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21147
Summary:
Ref T13515.
- Previously valid editor URIs may become invalid without being changed (if an administrator removes a protocol from the list, for example), but this isn't explained very well. Show an error on the settings page if the current value isn't usable.
- Generate a list of functions from an authority in the parser.
- Generate a list of protocols from configuration.
Test Plan: {F7370872}
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21146
Summary:
Ref T13515. Settings currently has some highly specialized code for rendering "Changes saved." messages. The "saved" state is communicated across a redirect-after-POST by adding `/saved/` to the end of the URI.
This isn't great. It needs a lot of moving pieces, including special accommodations in routing rules. It's user-visible. It has the wrong behavior if you reload the page or navigate directly to the "saved" URI.
Try this scheme, which is also pretty sketchy but seems like an upgrade on the balance:
- Set a cookie on the redirect which identifies the form we just saved.
- On page startup: if this cookie exists, save the value and clear it.
- If the current page started with a cookie identifying the form on the page, treat the page as a "saved" page.
This supports passing a small amount of state across the redirect-after-POST flow, and when you reload the page it doesn't keep the message around. Applications don't need to coordinate it, either. Seems somewhat cleaner?
Test Plan: In Firefox, Safari, and Chrome: saved settings, saw a "Saved changes" banner without any URI junk. Reloaded page, saw banner vanish properly.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21144
Summary:
Ref T13515. Currently, opening a file to a particular line in an external editor relies on replacing "%l" with "%l" (which is escaped as "%25l") on the server, and then replacing "%25l" with the line number on the client. This will fail if the file path (or any other variable) contains "%l" in its unencoded form.
The parser also can't identify invalid variables.
Pull the parser out, formalize it, and make it generate an intermediate representation which can be sent to the client and reconstituted.
(This temporarily breaks Diffusion and permanently removes the weird, ancient integration in Dark Console.)
Test Plan:
- Added a bunch of tests for the actual parser.
- Used "Open in Editor" in Differential.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21143
Summary: Ref T13515. No callsites actually use this, most editors don't support it, it doesn't seem terribly useful for the ones that do, it makes template-based APIs for line-number substitution complicated, and we can probably just loop on `window.open()` anyway.
Test Plan: Grepped for affected symbols, found no more references. Loaded settings page, saw no more setting.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21142
Summary:
Ref T13515. Adding "\" ("Open in External Editor") made this slighlty worse, but it was already pretty bad.
Long ago the keys had a special style on them, but this got changed and dropped somewhere around D16568 -- although at the time, I think they still had a grey background (see T11654).
Some later change removed this background.
Put the background back and separate the keystrokes into groups.
Test Plan: {F7370615}
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21141
Summary:
Ref T13515. It's not intuitive that these settings are "Display Preferences", even thought they're intenrally related to some of the other display preferences.
Give them a separate group.
Test Plan: {F7370500}
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21140
Summary:
Ref T13455. Update the other "view state" properties to work like "highlight" now works.
Some complexity here arises from these concerns:
- In "View Standalone", we render the changeset inline. This is useful for debugging/development, and desirable to retain.
- In all other cases, we render the changeset with AJAX.
So the client needs to be able to learn about the "state" properties of the changeset on two different flows. Prior to this change, each pathway had a fair amount of unique code.
Then, some bookkeeping issues:
- At inital rendering time, we may not know which renderer will be selected: it may be based on the client viewport dimensions.
- Prior to this change, the client didn't separate "value of the property for the changeset as rendered" and "desired value of the property".
Test Plan:
- Viewed changes in Differential, Diffusion, and in standalone mode.
- Toggled renderer, character sets, and document engine (this one isn't terribly useful). Reloaded, saw them stick.
- Started typing a comment, cancelled it, hit the undo UI.
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21138
Summary:
Ref T13455. Add container-level storage for persistent view state, and persist "Highlight As..." inside it.
The storage generates a "PhabricatorChangesetViewState" configuration object as an output.
When preferences are expressed on a diff and that diff is later attached to a revision, we attempt to copy the preferences.
The internal storage tracks per-changeset settings, but currently always uses "last update wins" to apply the settings in the UI.
Test Plan:
- Viewed revisions, changed highlighting, reloaded. Saw highlighting stick in revision view and standalone view.
- Viewed commits, changed highlighting, reloaded. Saw highlighting stick.
- Created a diff, changed highlighting, turned it into a revision, saw highlighting persist.
Subscribers: jmeador, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21137
Summary:
Ref T13515. We "shield" some changesets, including generated code and intradiffs with no intermediate changes.
These files don't get shielded if they have inline comments.
But, if the viewer has collapsed all the comments, we can shield the file again.
Test Plan:
- Created a change affecting files A and B, with three diffs:
- Touch A and B.
- Touch B only.
- Touch nothing.
- Added an inline to A and collapsed it.
- Viewed Diff 1 vs Diff 2:
- Saw A collapse with a note about inlines.
- Saw B changes, normally.
- Viewed Diff 2 vs Diff 3:
- Saw A collapse with a note about inlines.
- Saw B collapse normally.
- Uncollapsed the inline, viewed 1v2 and 2v3, saw A expand in both cases.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21136
Summary: Ref T13515. See PHI1661. If a file is selected, add a keystroke to click the "Open in External Editor" link.
Test Plan: In Safari, Chrome, and Firefox: used "J" to select a file, then "\" to open it in an external editor. (In Safari and Chrome, this prompts.)
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21135
Summary: Fixes T13512. Archived packages in Owners are missing hinting, but should have it.
Test Plan:
Before:
{F7369122}
After:
{F7369128}
Maniphest Tasks: T13512
Differential Revision: https://secure.phabricator.com/D21134
Summary:
Ref PHI1292. Enable fulltext searchs in paste. Maybe this should only index a snippet instead of the entire content?
Also updates table names in `PhabricatorPasteQuery`.
Test Plan: Created some pastes, indexed them, searched for them.
Reviewers: amckinley
Subscribers: codeblock, Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20650
Summary: Ref T13511. Currently, Ferret fulltext field functions (like "title:") are hard-coded. Modularize them so extensions may define new ones.
Test Plan: Added a new custom field which emits data for the indexer, searched for "animal-noises:moo", "animal-noises:-", etc., in global search and application search.
Maniphest Tasks: T13511
Differential Revision: https://secure.phabricator.com/D21131
Summary:
Ref T13511. Ferret functions currently define "aliases", and some applications override the default aliases.
This probably isn't really the right model, since it means the available function aliases in global search depend on the types of documents you're searching for. This isn't fundamentally unworkable but is kind of weird.
Regardless, these don't actually work. Searching for "description:x" is a syntax error.
Since they don't work, it's a good bet no one is relying on them. Just get rid of them until there's a clearer argument for the feature.
Test Plan: Grepped for "getFunctionMap", got no other hits. Ran some queries with the alias functions, got syntax errors.
Maniphest Tasks: T13511
Differential Revision: https://secure.phabricator.com/D21130
Summary:
Ref T13501. Depends on D21127. With the "prefix" behavior removed in D21127, we now have two virtually identical copies of the same code.
The newer one in Ferret is better: it slices utf8 correctly and is slightly more efficient on large inputs. Pull it out and make all callers call into it.
Test Plan:
- Grepped for all affected symbols.
- Ran `bin/search index --force ...` to reindex various objects (tasks, files).
- Searched for things in the UI.
Maniphest Tasks: T13501
Differential Revision: https://secure.phabricator.com/D21128
Summary:
Ref T13501. The older ngram code has some "prefix" behavior that tries to handle cases where a user issues a very short (one or two character) query.
This code doesn't work, presumably never worked, and can not be made to work (or, at least, I don't see a way, and am fairly sure one does not exist).
If the user searches for "xy", we can find trigrams in the form "xy*" using the index, but not in the form "*xy". The code makes a misguided effort to look for " xy", but this will only find "xy" in words that begin with "xy", like "xylophone".
For example, searching Files for "om" does not currently find "random.txt".
Remove this behavior. Without engaging the trigram index, these queries fall back to an unidexed "LIKE" table scan, but that's about the best we can do.
Test Plan: Searched for "om", hit "random.txt".
Maniphest Tasks: T13501
Differential Revision: https://secure.phabricator.com/D21127
Summary: Ref T13511. This function does nothing interesting and has no callers.
Test Plan: Grepped for callers.
Maniphest Tasks: T13511
Differential Revision: https://secure.phabricator.com/D21126
Summary:
Ref T13507. We currently compress normal responses, but do not compress file data responses because most files we serve are images and already compressed.
However, there are some cases where large files may be highly compressible (e.g., huge XML files stored in LFS) and we can benefit from compressing responses.
Make a reasonable guess about whether compression is beneficial and enable compression if we guess it is.
Test Plan:
- Used `curl ...` to download an image with `Accept-Encoding: gzip`. Got raw image data in the response (as expected, because we don't expect images to be worthwhile to recompress).
- Used `curl ...` to download a text file with `Accept-Encoding: gzip`. Got a compressed response. Decompressed the response into the original file.
Maniphest Tasks: T13507
Differential Revision: https://secure.phabricator.com/D21125
Summary:
See <https://hackerone.com/reports/850114>.
An attacker with administrator privileges can configure "notification.servers" to connect to internal services, either directly or with chosen parameters by selecting an attacker-controlled service and having it issue a "Location" redirect.
Generally, we allow this attack to occur. The same administrator can use an authentication provider or a VCS repository to perform the same attack, and we can't reasonably harden these workflows without breaking things that users expect to be able to do.
There's no reason this particular variation of the attack needs to be allowable, though, and the current behavior isn't consistent with how other similar things work.
- Hide the "notification.servers" configuration, which also locks it. This is similar to other modern service/server configuration.
- Don't follow redirects on these requests. Aphlict should never issue a "Location" header, so if we encounter one something is misconfigured. Declining to follow this header likely makes the issue easier to debug.
Test Plan:
- Viewed configuration in web UI.
- Configured a server that "Location: ..." redirects, got a followed redirect before and a failure afterward.
{F7365973}
Differential Revision: https://secure.phabricator.com/D21123
Summary:
Ref T13507. Now that we handle processing of "Content-Encoding: gzip" headers by default, this setup check can get a decompressed body back. Since it specifically wants a raw body back, disable this behavior.
Also, "@" a couple things which can get in the way if they fail now that error handling is more aggressive about throwing on warnings.
Test Plan: Ran setup check after other changes in T13507, got clean result.
Maniphest Tasks: T13507
Differential Revision: https://secure.phabricator.com/D21122
Summary: Ref T13507. If we believe the server can accept "Content-Encoding: gzip" requests, make the claim in an "X-Conduit-Capabilities" header in responses. Clients can use request compression on subsequent requests.
Test Plan: See D21119 for the client piece.
Maniphest Tasks: T13507
Differential Revision: https://secure.phabricator.com/D21120
Summary: Ref T13507. See that task for discussion.
Test Plan: Faked different response behaviors and hit both variations of this error.
Maniphest Tasks: T13507
Differential Revision: https://secure.phabricator.com/D21116
Summary:
See PHI1692. Currently, the Aphlict log is ridiculously verbose. As an initial pass at improving this:
- When starting in "debug" mode, pass "--debug=1" to Node.
- In Node, separate logging into "log" (lower-volume, more-important messages) and "trace" (higher-volume, less-important messages).
- Only print "trace" messages in "debug" mode.
Test Plan: Ran Aphlict in debug and non-debug modes. Behavior unchanged in debug mode, but log has more sensible verbosity in non-debug mode.
Differential Revision: https://secure.phabricator.com/D21115
Summary:
See PHI1692. Currently, it's hard to get a local profile or "--trace" of some Diffusion API methods, since they always proxy via HTTP -- even if the local node can serve the request.
This always-proxy behavior is intentional (so we always go down the same code path, to limit surprises) but inconvenient when debugging. Allow an operator to connect to a node which can serve a request and issue a `--local` call to force in-process execution.
This makes it straightforward to "--trace" or "--xprofile" the call.
Test Plan: Ran `bin/conduit call ...` with and without `--local` using a Diffusion method on a clustered repository. Without `--local`, saw proxy via HTTP. With `--local`, saw in-process execution.
Differential Revision: https://secure.phabricator.com/D21114
Summary: Ref T13509. In `title:big "red" dog`, keep "title" sticky across all three terms, since this seems like it's probably the best match for intent.
Test Plan: Added unit tests; ran unit tests.
Maniphest Tasks: T13509
Differential Revision: https://secure.phabricator.com/D21111
Summary:
Ref T13509. Now that the compiler can parse these queries, actually implement them.
These are fairly easy to implement:
- For present, just "JOIN". If it works, the field is present.
- For absent, we "LEFT JOIN" and then "WHERE any_column IS NULL".
Test Plan: Searched for various documents with and without fields present, got sensible results in Maniphest. For example, "body:-" finds tasks with no body, "body:- duck" finds tasks with no body and "duck" elsewhere in the content, and so on.
Maniphest Tasks: T13509
Differential Revision: https://secure.phabricator.com/D21110
Summary:
Ref T13509. Since `title:- cat` is now ambiguous, forbid spaces after operators.
Also, forbid spaces inside operators, although this has no effect today.
Test Plan: Added unit tests, ran unit tests.
Maniphest Tasks: T13509
Differential Revision: https://secure.phabricator.com/D21109
Summary:
Ref T13509. Currently, functions are "sticky", but this stickness is in the query execution layer.
Instead:
- move stickiness to the query compiler; and
- make it so that functions are not sticky if their arguments are quoted.
For example:
- `title:x y` previously meant `title:x title:y` (and still does). The "title:" is sticky.
- `title:"x" y` previously meant `title:x title:y`. It now means `title:x all:y`. The "title:" is not sticky because the argument is quoted.
Test Plan: Added unit tests, ran unit tests.
Maniphest Tasks: T13509
Differential Revision: https://secure.phabricator.com/D21108
Summary: Ref T13509. Parse "xyz:-" as "xyz is absent" and "xyz:~" as "xyz is present". These are new operators which the compiler emits separately from "not" and "substring".
Test Plan: Added unit tests, ran unit tests.
Maniphest Tasks: T13509
Differential Revision: https://secure.phabricator.com/D21107
Summary:
Ref T13509. Certain query tokens like `title:=""` are currently accepted by the parser but discarded, and have no impact on the query. This isn't desirable.
Instead, require that tokens making an assertion about field content must be nonempty.
Test Plan: Added unit tests, made them pass.
Maniphest Tasks: T13509
Differential Revision: https://secure.phabricator.com/D21106
Summary: Ref T13490. This simplifies some client behavior in the general case.
Test Plan: Called API method, saw URIs.
Maniphest Tasks: T13490
Differential Revision: https://secure.phabricator.com/D21105
Summary:
See PHI1697. If a diff is not attached to a revision (for example, if it was created with "arc diff --only"), but is attached to a repository, it is supposed to be visible only to users who can see that repository.
It currently skips this extended policy check and may incorrectly be visible to too many users.
(Once a diff is attached to a revision, this rule is enforced properly via the revision policy.)
Test Plan:
- Set repository R to be visible only to Alice.
- As Alice, created a diff from a working copy of repository R with "arc diff --only".
- As Bailey, viewed the diff.
- Before: visible diff.
- After: policy exception (as expected).
Differential Revision: https://secure.phabricator.com/D21103
Summary: Ref T13490. This simplifies mostly-theoretical cases where you're accessing Phabricator via arc-over-ssh and the Conduit protocol + domain may differ from the production protocol + domain.
Test Plan: Called API via web UI, saw sensible URI values in results.
Maniphest Tasks: T13490
Differential Revision: https://secure.phabricator.com/D21102
Summary: Ref T13505. See that task for details. When a class has exactly one "@task" block, this API returns a string. Some day, this should be made more consistent.
Test Plan: Viewed a class with exactly one "@task", no more fatal. Viewed classes with zero and more than one "@task" attributes, got clean renderings.
Maniphest Tasks: T13505
Differential Revision: https://secure.phabricator.com/D21062
Summary: Ref T13505. See that task for discussion.
Test Plan: Ran `diviner generate` locally, found a page fataling on this `strlen()`, applied patch, got a sketchy but not-broken page.
Maniphest Tasks: T13505
Differential Revision: https://secure.phabricator.com/D21061
Summary: See PHI1684. Expose the published state of the "Done" checkbox to the API.
Test Plan: Made API calls on a comment in all four states, got correct published states via the API in all cases.
Differential Revision: https://secure.phabricator.com/D21059
Summary:
See <https://discourse.phabricator-community.org/t/upgrade-from-sep-30-2016/3702/>. A user performing an upgrade from 2016 to 2020 ran into an issue where this setup query is overheating.
This is likely caused by too many rows changing state during query execution, but the particulars aren't important since this setup check isn't too critical and will catch the issue eventually. It's fine to just move on if this query fails for any reason.
Test Plan: Forced the query to overheat, loaded setup issues, got overheating fatal. Applied patch, no more fatal.
Differential Revision: https://secure.phabricator.com/D21057
Summary:
See PHI1688. If many refs with a large amount of shared ancestry are deleted from a repository, we can spend much longer than necessary marking their mutual ancestors as unreachable over and over again.
For example, if refs A, B and C all point near the head of an obsolete "develop" branch and have about 1K shared commits reachable from no other refs, deleting all three refs will lead to us performing 3,000 mark-as-unreachable operations (once for each "<ref, commit>" pair).
Instead, we can stop exploring history once we reach an already-unreachable commit.
Test Plan:
- Destroyed 7 similar refs simultaneously.
- Ran `bin/repository refs`, saw 7 entries appear in the `oldref` table.
- Ran `bin/repository discover` with some debugging statements added, saw sensible-seeming behavior which didn't double-mark any newly-unreachable refs.
Differential Revision: https://secure.phabricator.com/D21056
Summary:
Depends on D21053. Ref T11968. Three things have changed:
- Overseers can no longer use FutureIterator to continue execution of an arbitrary list of futures from any state. Use FuturePool instead.
- Same with repository daemons.
- Probably (?) fix an API change in the Harbormaster exec future.
Test Plan:
- Ran "bin/phd debug task" and "bin/phd debug pull", no longer saw Future-management related errors.
- The Harbormaster future is easiest to test by just seeing if production works once this change is deployed there.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11968
Differential Revision: https://secure.phabricator.com/D21054
Summary:
We write some synthetic HTTP responses inside unit tests. Some responses have an indirect side effect of adjusting "zlib.output_compression", but this adjustment fails if headers have already been output. From a CLI context, headers appear to count as already-output after we write anything to stdout:
```
<?php
echo headers_sent() ? "Y" : "N";
echo "\n";
echo headers_sent() ? "Y" : "N";
echo "\n";
```
This script prints "N", then "Y".
Recently, the default severity of warnings was increased in libphutil; this has been a long-standing warning but now causes test failures.
This behavior is sort of silly but the whole thing is kind of moot anyway. Just skip it if "headers_sent()" is true.
Test Plan: Ran "arc unit --everything", got clean results.
Differential Revision: https://secure.phabricator.com/D21055
Summary: Jira allows creating projects which contain number in names, phabricator will not allow such projects but it should
Test Plan: Pasted URL with Jira project which contain number in project name and it was parsed and resolved properly in phabricator
Reviewers: epriestley, Pawka, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D21040
Summary:
Ref T13493. Google returns a lower-quality account identifier ("email") and a higher-quality account identifier ("id"). We currently read only "email".
Change the logic to read both "email" and "id", so that if Google ever moves away from "email" the transition will be a bit easier.
Test Plan: Linked/unlinked a Google account, looked at the external account identifier table.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21028
Summary:
Fixes T5028. Older versions of Git (apparently, from before 2010) did not provide a way to extract the raw body of a commit message from "git log", so we approximate it with "subject" and "wrapped body".
In newer versions of Git, the raw body can be extracted exactly.
Adjust how we extract messages based on the version of Git, and try to be more faithful to edge cases: particularly, be more careful to extract the correct number of trailing newlines.
Test Plan:
- Added "var_dump()" + "die(1)" later in this method, then pushed various commit messages. Used "&& false" to force execution down the old path (either path should work in modern Git).
- Observed more faithful extraction of messages, including a more faithful extraction of the number of trailing newlines. Extraction is fully faithful if we can go down the "%B" path, which we should be able to in nearly all modern cases.
- Not all messages extract faithfully or consistently across the old and new versions, but the old extraction is destructive so this is likely about as close as we can realistically ever get.
Maniphest Tasks: T5028
Differential Revision: https://secure.phabricator.com/D21027
Summary:
Depends on D21022. Ref T13493. The JIRA API has changed from using "key" to identify users to using "accountId".
By reading both identifiers, this linkage "just works" if you run against an old version of JIRA, a new version of JIRA, or an intermediate version of JIRA.
It also "just works" if you run old JIRA, upgrade to intermediate JIRA, everyone refreshes their link at least once, then you upgrade to new JIRA.
This is a subset of cases and does not include "sudden upgrade to new JIRA", but it's strictly better than the old behavior for all cases it covers.
Test Plan: Linked, unlinked, and logged in with JIRA. Looked at the "ExternalAccountIdentifier" table and saw a sensible value.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21023
Summary: Depends on D21019. Ref T13493. There are no more barriers to removing readers and writers of "accountID"; the new "ExternalAccountIdentity" table can replace it completely.
Test Plan: Linked and unlinked OAuth accounts, logged in with OAuth accounts, tried to double-link OAuth accounts, grepped for affected symbols.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21022
Summary:
Depends on D21018. Ref T13493. Ref T6703. The "ExternalAccount" table has a unique key on `<accountType, accountDomain, accountID>` but this no longer matches our model of reality and changes in this sequence end writes to `accountID`.
Remove this key.
Then, remove all readers of `accountType` and `accountDomain` (and all nontrivial writers) because none of these callsites are well-aligned with plans in T6703.
This change has no user-facing impact today: all the rules about linking/unlinking/etc remain unchanged, because other rules currently prevent creation of more than one provider with a given "accountType".
Test Plan:
- Linked an OAuth1 account (JIRA).
- Linked an OAuth2 account (Asana).
- Used `bin/auth refresh` to cycle OAuth tokens.
- Grepped for affected symbols.
- Published an Asana update.
- Published a JIRA link.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13493, T6703
Differential Revision: https://secure.phabricator.com/D21019
Summary: Depends on D21017. Ref T13493. Update the Asana integration so it reads the "ExternalAccountIdentifier" table instead of the old "accountID" field.
Test Plan: Linked an Asana account, used `bin/feed republish` to publish activity to Asana.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21018
Summary:
Depends on D21015. When we sync an external account and get a list of account identifiers, write them to the database.
Nothing reads them yet and we still write "accountId", this just prepares us for reads.
Test Plan: Linked, refreshed, unlinked, and re-linked an external account. Peeked at the database and saw a sensible-looking row.
Differential Revision: https://secure.phabricator.com/D21016
Summary: Depends on D21014. Ref T13493. Make these objects all use destructible interfaces and destroy sub-objects appropriately.
Test Plan:
- Used `bin/remove destroy --trace ...` to destroy a provider, a user, and an external account.
- Observed destruction of sub-objects, including external account identifiers.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21015
Summary:
Depends on D21013. Ref T13493. When users log in with most providers, the provider returns an "ExternalAccount" identifier (like an Asana account GUID) and the workflow figures out where to go from there, usually a decision to try to send the user to registration (if the external account isn't linked to anything yet) or login (if it is).
In the case of password providers, the password is really a property of an existing account, so sending the user to registration never makes sense. We can bypass the "external identifier" indirection layer and just say "username -> internal account" instead of "external GUID -> internal mapping -> internal account".
Formalize this so that "AuthProvider" can generate either a "map this external account" value or a "use this internal account" value.
This stops populating "accountID" on "password" "ExternalAccount" objects, but this was only an artifact of convenience. (These records don't really need to exist at all, but there's little harm in going down the same workflow as everything else for consistency.)
Test Plan: Logged in with a username/password. Wiped the external account table and repeated the process.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21014
Summary:
Depends on D21012. Ref T13493. Currently, auth adapters return a single identifier for each external account.
Allow them to return more than one identifier, to better handle cases where an API changes from providing a lower-quality identifier to a higher-quality identifier.
On its own, this change doesn't change any user-facing behavior.
Test Plan: Linked and unlinked external accounts.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21013
Summary:
Ref T13493. This check was introduced in D4647, but the condition can never be reached in modern Phabricator because the table has a unique key on `<accountType, accountDomain, accountID>` -- so no row can ever exist with the same value for that tuple but a different ID.
(I'm not entirely sure if it was reachable in D4647 either.)
Test Plan: Used `SHOW CREATE TABLE` to look at keys on the table and reasoned that this block can never have any effect.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21012
Summary:
Depends on D21010. Ref T13493. External accounts may have multiple different unique identifiers, most often when v1 of the API makes a questionable choice (and provies a mutable, non-unique, or PII identifier) and v2 of the API uses an immutable, unique, random identifier.
Allow Phabricator to store multiple identifiers per external account.
Test Plan: Storage only, see followup changes.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21011
Summary:
Ref T13493. The "AuthAccountView" UI element currently exposes raw account ID values, but I'm trying to make these many-to-one.
This isn't terribly useful as-is, so get rid of it. This element could use a design refresh in general.
Test Plan: Viewed the UI element in "External Accounts".
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21010
Summary:
See PHI1647, which asks for "vscode://" to be a configurable protocol on hosted Phacility instances.
I made the configuration editable in D21008, but this can reasonably just come upstream too.
Test Plan: Viewed config in Config, set my editor URI to `vscode://blahblah`.
Differential Revision: https://secure.phabricator.com/D21009
Summary:
Ref T13493. I'm updating callers to `getAccountID()` to prepare to move it to a separate table.
This callsite once supported this flow:
- External users with no accounts send mail to `bugs@`.
- This creates tasks in Maniphest.
- They're CC'd when the tasks are updated.
However, after T12237 we never actually send this mail (since their addresses are necessarily unverified).
I left this code in in case this needed to be revisited, but it hasn't been an issue. Just remove it and treat these users as undeliverable.
Test Plan: As a cursory test for nothing being horribly broken, sent some object mail.
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21007
Summary:
Ref T13395. No library with this name loads any more, so we can't version check it.
(Ideally, the version check stuff would be more graceful when it fails now, since it's required to load "Config" after I moved it off a separate page.)
Test Plan: Loaded "Config".
Maniphest Tasks: T13395
Differential Revision: https://secure.phabricator.com/D20995
Summary: Fixes T2543. This mode has been a stable prototype for a very long time now; promote it so "--draft" can promote out of "experimental" in Arcanist.
Test Plan: See T2543 for discussion.
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D20983
Summary: Ref T13395. Moves a small amount of remaining "libphutil/" code into "phabricator/" and stops us from loading "libphutil/".
Test Plan: Browsed around; there are likely remaining issues.
Maniphest Tasks: T13395
Differential Revision: https://secure.phabricator.com/D20981
Summary: Ref T13395. Move cache classes, syntax highlighters, other markup classes, and sprite sheets to Phabricator.
Test Plan: Attempted to find any callers for any of this stuff in libphutil or Arcanist and couldn't.
Maniphest Tasks: T13395
Differential Revision: https://secure.phabricator.com/D20977
Summary:
`diffusion.branchquery` can return dictionary instead of array if some branches are filtered out.
Eg.:
```
{
"result": [
{
"shortName": "master",
"commitIdentifier": "2817b0d8f79748ddfad0220c46d9b20bea34f460",
"refType": "branch",
"rawFields": {
"objectname": "2817b0d8f79748ddfad0220c46d9b20bea34f460",
"objecttype": "commit",
```
might become:
```
{
"result": {
"1": {
"shortName": "master",
"commitIdentifier": "2817b0d8f79748ddfad0220c46d9b20bea34f460",
"refType": "branch",
"rawFields": {
"objectname": "2817b0d8f79748ddfad0220c46d9b20bea34f460",
"objecttype": "commit",
```
Reproduction - find repository which has couple of branches, setup to track only some of them, execute `diffusion.branchquery` API call - result is dictionary instead of array
Test Plan: Apply patch, execution `diffusion.branchquery` call - result is no longer dictionary if it was one before
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D20973
Summary: Ref T13395. Moves some Aphront classes from libphutil to Phabricator.
Test Plan: Grepped for symbols in libphutil and Arcanist.
Maniphest Tasks: T13395
Differential Revision: https://secure.phabricator.com/D20975
Summary:
Fixes T5427. See PHI1630. See also T13160 and D20568.
In the full HTML table syntax with "<table>", respect linebreaks as literals inside "<td>" cells.
Test Plan: Previewed some full-HTML tables with and without linebreaks, saw what seemed like sensible rendering behavior.
Maniphest Tasks: T5427
Differential Revision: https://secure.phabricator.com/D20971
Summary: Ref T10635. An install with large blocks of remarkup (4MB) in test details is reporting slow page rendering. This is expected, but I've mostly given up on fighting this unless I absolutely have to. Degrade the interface more aggressively.
Test Plan:
- Submitted a large block of test details in remarkup format.
- Before patch: they rendered inline.
- After patch: degraded display.
- Verified small blocks are not changed.
{F7180727}
{F7180728}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T10635
Differential Revision: https://secure.phabricator.com/D20970
Summary: Ref T13486. Currently, "Zarbo" sorts above "alice", but this isn't expected for a list of (mostly) human usernames.
Test Plan: Loaded a task with subscribers with mixed-case usernames.
Maniphest Tasks: T13486
Differential Revision: https://secure.phabricator.com/D20969
Summary: Fixes T13487. In PHI1628, an install has a 4MB remarkup corpus which takes a long time to render. This is broadly expected, but a few reasonable improvements fell out of running it through the profiler.
Test Plan:
- Saw local cold-cache end-to-end rendering time drop from 12s to 4s for the highly secret input corpus.
- Verified output has the same hashes before/after.
- Ran all remarkup unit tests.
Maniphest Tasks: T13487
Differential Revision: https://secure.phabricator.com/D20968
Summary:
Depends on D20966. Ref T13486. Curtains currently render subscribers in a plain text list, but the new ref list element is a good fit for this.
Also, improve the sorting and ordering behavior.
This makes the subscriber list take up a bit more space, but it should make it a lot easier to read at a glance.
Test Plan: Viewed object subscriber lists at varying limits and subscriber counts, saw sensible subscriber lists.
Maniphest Tasks: T13486
Differential Revision: https://secure.phabricator.com/D20967
Summary:
Ref T13486. When a curtain element like "Author" in Maniphest has a very long username, the wrapping and overflow behavior is poor: the date is obscured.
Adjust curtain elements which contain lists of references to other objects to improve wrapping behavior (put the date on a separate line) and overflow behavior (so we get a "..." when a name overflows).
Test Plan: {F7179376}
Maniphest Tasks: T13486
Differential Revision: https://secure.phabricator.com/D20966
Summary: Fixes T13335. When processing quoted blocks, we remove leading empty lines. This logic incorrectly continued after encountering a nonempty line.
Test Plan: Added a test, made it pass. Previewed blocks in web UI.
Maniphest Tasks: T13335
Differential Revision: https://secure.phabricator.com/D20965
Summary: Fixes T13485. GitHub has deprecated the "access_token" URI parameter for API authentication. Update to "Authorization: token ...".
Test Plan: Linked and unlinked a GitHub account locally.
Maniphest Tasks: T13485
Differential Revision: https://secure.phabricator.com/D20964
Summary: Ref T13480. Creating a rule in Herald currently uses the older radio-button flow. Update it to the "clickable menu" flow to simplify it a little bit.
Test Plan: Created new personal, object, and global rules. Hit the object rule error conditions.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20956
Summary:
Fixes T13463. Currently, if you use the web UI to set "Related Tasks" for a revision, the resulting commit does not link to the tasks.
If you use "Ref ..." in the message instead, the resulting commit does link to the tasks.
Broadly, this should all be cleaner (see T3577) but we can step toward better behavior by just copying these edges when commits are published.
Test Plan:
- Created a revision.
- Used the web UI to edit "Related Tasks".
- Landed the revision.
- Saw the commit link to the tasks as though I'd used "Ref ..." in the message.
Maniphest Tasks: T13463
Differential Revision: https://secure.phabricator.com/D20961
Summary:
Depends on D20933. Ref T13362. This reorganizes Config a bit and attempts to simplify it.
Subsections are now in a landing page console and groupings have been removed. We "only" have 75 values you can edit from the web UI nowadays, which is still a lot, but less overwhelming than it was in the past. And the trend is generally downward, as config is removed/simplified or moved into application settings.
This also gets rid of the "gigantic blobs of JSON in the UI".
Test Plan: Browsed all Config sections.
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20934
Summary: Depends on D20931. Ref T13362. Move all "Console"-style interfaces to use a consistent layout based on a new "LauncherView" which just centers the content.
Test Plan: Viewed all affected interfaces.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20933
Summary: Depends on D20930. Ref T13362. Put all the "Services" parts of Config in their own section.
Test Plan: Clicked through each section. This is just an organization / UI change with no significant behavioral impact.
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20931
Summary:
Ref T13362. Config is currently doing a ton of stuff and fairly overwhelming. Separate out "Modules/Extensions" so it can live in its own section.
(This stuff is mostly useful for development and normal users rarely need to end up here.)
Test Plan: Visited seciton, clicked around. This is just a visual change.
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20930
Summary:
Ref T13484. If you load a subproject S which has a mangled/invalid `parentPath`, the query currently tries to execute an empty edge query and fatals.
Instead, we want to deny-by-default in the policy layer but not fail the query. The subproject should become restricted but not fatal anything related to it.
See T13484 for a future refinement where we could identify "broken / data integrity issue" objects explicilty.
Test Plan:
- Modified the `projectPath` of some subproject in the database to `QQQQ...`.
- Loaded that project page.
- Before patch: fatal after issuing bad edge query.
- After patch: "functionally correct" policy layer failure, although an explicit "data integrity issue" failure would be better.
Maniphest Tasks: T13484
Differential Revision: https://secure.phabricator.com/D20963
Summary: Ref T13480. Some Herald fields need audit information, which recent changes to Herald adapters discarded. For now, just load it unconditionally.
Test Plan: Triggered an Audit-related rule locally.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20962
Summary:
Fixes T13468. See that task for discussion. The older source-rendering code mixes "line number" / "1-based" lists with "block number" / "0-based" lists and then has other bugs which cancel this out.
For block-based diffs, build an explicit block-based mask with only block numbers. This sort of sidesteps the whole issue.
Test Plan: Viewed the diff with the original reproduction case, plus various other block-based diffs, including one-block image diffs, in unified and side-by-side mode. Didn't spot any oddities.
Maniphest Tasks: T13468
Differential Revision: https://secure.phabricator.com/D20959
Summary:
Fixes T13475. Sometimes, we issue a "no op" / "default permit" / "unchallenged" MFA token, when a user with no MFA configured does something which is configured to attempt (but not strictly require) MFA.
An example of this kind of action is changing a username: usernames may be changed even if MFA is not set up.
(Some other operations, notably "Sign With MFA", strictly require that MFA actually be set up.)
When a user with no MFA configured takes a "try MFA" action, we see that they have no factors configured and issue a token so they can continue. This is correct. However, this token causes the assocaited timeline story to get an MFA badge.
This badge is incorrect or at least wildly misleading, since the technical assertion it currently makes ("the user answered any configured MFA challenge to do this, if one exists") isn't explained properly and isn't useful anyway.
Instead, only badge the story if the user actually has MFA and actually responded to some kind of MFA challege. The badge now asserts "this user responded to an MFA challenge", which is expected/desired.
Test Plan:
- As a user with no MFA, renamed a user. Before patch: badged story. After patch: no badge.
- As a user with MFA, renamed a user. Got badged stories in both cases.
Maniphest Tasks: T13475
Differential Revision: https://secure.phabricator.com/D20958
Summary: Fixes T13480. Adds the remaining missing Owners package rules for Herald commit adapters.
Test Plan: Created hooks which care about these fields, pushed commits, saw sensible transcript values.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20957
Summary: Ref T13480. The Herald "Commit" rules still use raw commit data properties to identify authors and committers. Instead, use repository identities.
Test Plan: Wrote a Herald rule using all four fields, ran it against various commits with and without known authors. Checked transcript for sensible field values.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20955
Summary:
Ref T13480. Currently, Herald commit hook rules use a raw address resolution query to identify the author and committer for a commit. This will get the wrong answer when the raw identity string has been explicitly bound to some non-default user (most often, it will fail to identify an author when one exists).
Instead, use the "IdentityEngine" to properly resolve identities.
Test Plan: Authored a commit as `X <y@example.com>`, a raw identity with no "natural" matches to users (e.g., no user with that email or username). Bound the identity to a particular user in Diffusion. Wrote a Herald pre-commit content rule, pushed the commit. Saw Herald recognize the correct user when evaluating rules.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20953
Summary:
Ref T13480. Currently, some Herald field types are rendered in an unfriendly way on transcripts. Particularly, PHID lists are rendered as raw PHIDs.
Improve this by delegating rendering to Value objects and letting "PHID List" value objects render more sensible handle lists. Also improve "bool" fields a bit and make more fields render an explicit "None" / empty value rather than just rendering nothing.
Test Plan: Viewed various transcripts, including transcripts covering boolean values, the "Always" condition, large blocks of text, and PHID lists.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20951
Summary:
Ref T13480. Currently, when Herald renders a transcript, it puts display labels into array keys. This is a bad pattern for several reasons, notably that the values must be scalar (so you can't add icons or other markup later) and the values must be unique (which is easily violated because many values are translated).
Instead, keep values as list items.
Test Plan: Viewed Herald transcripts, saw no (meaningful) change in rendering output.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20949
Summary: Ref T13480. When Herald renders rules, it partly uses a very old handle pre-loading mechanism where PHIDs are extracted and loaded upfront. This was obsoleted a long time ago and was pretty shaky even when it worked. Get rid of it to simplify the code a little.
Test Plan: Viewed Herald rules rendered into static text with PHID list actions, saw handles. Grepped for all affected methods.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20948
Summary: Ref T13480. Add an "Author's packages" field to Herald to support writing rules like "if affected packages include X, and author's packages do not include X, raise the alarm".
Test Plan: Wrote and executed rules with the field, saw a sensible field value in the transcript.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20947
Summary: Ref T13480. These fields don't serve a specific strong use case, but are broadly reasonable capabilities after "state" vs "change" actions were relaxed by T13283.
Test Plan: Wrote rules using the new fields, added and removed projects (and did neither) to fire them / not fire them. Inspected the transcripts to see the project PHIDs making it to the field values.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20946
Summary:
Fixes T13479. The behavior of "git rev-parse --show-toplevel" has changed in Git 2.25.0, and it now fails in bare repositories.
Instead, use "git rev-parse --git-dir" to sanity-check the working copy. This appears to have more stable behavior across Git versions, although it's a little more complicated for our purposes.
Test Plan:
- Ran `bin/repository update ...` on an observed, bare repository.
- ...on an observed, non-bare ("legacy") repository.
- ...on a hosted, bare repository.
Maniphest Tasks: T13479
Differential Revision: https://secure.phabricator.com/D20945
Summary: Ref T13472. Ref T13395. These classes are only used by Phabricator and not likely to find much use in Arcanist.
Test Plan: Grepped libphutil and Arcanist for removed symbols.
Maniphest Tasks: T13472, T13395
Differential Revision: https://secure.phabricator.com/D20939
Summary:
See <https://hackerone.com/reports/758002>. The link rules don't test that their parameters are flat text before using them in unsafe contexts.
Since almost all rules are lower-priority than these link rules, this behavior isn't obvious. However, two rules have broadly higher priority (monospaced text, and one variation of link rules has higher priority than the other), and the latter can be used to perform an XSS attack with input in the general form `()[ [[ ... | ... ]] ]` so that the inner link rule is evaluated first, then the outer link rule uses non-flat text in an unsafe way.
Test Plan:
Tested examples in HackerOne report. A simple example of broken (but not unsafe) behavior is:
```
[[ `x` | `y` ]]
```
Differential Revision: https://secure.phabricator.com/D20937
Summary: Maniphest object has `getURI` method, let's use it
Test Plan: Create event in task - URI generated as expected in email notification
Reviewers: epriestley, Pawka, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D20935
Summary:
Ref T13362. Some applications moved to fixed-width a while ago but I was generally unsatisfied with where they ended up and have been pushing them back to full-width.
Push Config back to full-width. Some of the subpages end up a little weird, but this provides more space to work with to make some improvements, like makign `maniphest.statuses` more legible in the UI>
Test Plan: Grepped for `setFixed(`, updated each page in `/config/`. Browsed each controller, saw workable full-width UIs.
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20925
Summary:
See PHI1558. Ref T11860. Ref T13444. I partly implemented PHIDs for "UserEmail" objects, but they can't load on their own so you can't directly `bin/remove destroy` them yet.
Allow them to actually load by implementing "PolicyInterface".
Addresses are viewable and editable by the associated user, unless they are a bot/list address, in which case they are viewable and editable by administrators (in preparation for T11860). This has no real impact on anything today.
Test Plan:
- Used `bin/remove destroy <phid>` to destroy an individual email address.
- Before: error while loading the object by PHID in the query policy layer.
- After: clean load and destroy.
Maniphest Tasks: T13444, T11860
Differential Revision: https://secure.phabricator.com/D20927
Summary: Fixes T13465. This "phlog()" made some degree of sense at one time, but is no longer useful or consistent. Get rid of it. See T13465 for discussion.
Test Plan: Made a conduit call that hit a policy error, no longer saw error in log.
Maniphest Tasks: T13465
Differential Revision: https://secure.phabricator.com/D20924
Summary:
Fixes T13464. Fully-realized paths have a "path" (normalized, effective path) and a "display" path (user-facing, un-normalized path).
During transaction validation we build ref keys for paths before we normalize the "display" values. A few different approaches could be taken to resolve this, but just default the "display" path to the raw "path" if it isn't present since that seems simplest.
Test Plan: Edited paths in an Owners package, no longer saw a warning in the logs.
Maniphest Tasks: T13464
Differential Revision: https://secure.phabricator.com/D20923
Summary: Ref T13444. Allow the effects of performing an identity rebuild to be previewed without committing to any changes.
Test Plan: Ran "bin/repository rebuild-identities --all-identities" with and without "--dry-run".
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20922
Summary:
Fixes T13457. Ref T13444. When we iterate over commits in a particular repository, the default iteration strategy can't effectively use the keys on the table.
Tweak the ordering so the "<repositoryID, epoch, [id]>" key can be used.
Test Plan:
- Ran `bin/audit delete --repository X` and `bin/repository rebuild-identities --repository X` before and after changes.
- With just the key changes, performance was slightly better. My local data isn't large enough to really emphasize the key changes.
- With the page size changes, performance was a bit better (~30%, but on 1-3 second run durations).
- Used `--trace` and ran `EXPLAIN ...` on the new queries, saw them select the "<repositoryID, epoch, [id]>" key and report a bare "Using index condition" in the "Extra" column.
Maniphest Tasks: T13457, T13444
Differential Revision: https://secure.phabricator.com/D20921
Summary:
Ref T13444. Currently, many mutations to users and email addresses (particularly: user creation; and user and address destruction) do not propagate properly to repository identities.
Add hooks to all mutation workflows so repository identities get rebuilt properly when users are created, email addresses are removed, users or email addresses are destroyed, or email addresses are reassigned.
Test Plan:
- Added random email address to account, removed it.
- Added unassociated email address to account, saw identity update (and associate).
- Removed it, saw identity update (and disassociate).
- Registered an account with an unassociated email address, saw identity update (and associate).
- Destroyed the account, saw identity update (and disassociate).
- Added address X to account A, unverified.
- Invited address X.
- Clicked invite link as account B.
- Confirmed desire to steal address.
- Saw identity update and reassociate.
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20914
Summary:
Ref T13444. To interact meaningfully with "DestructionEngine", objects need a PHID. The "UserEmail" object currently does not have one (or a real "Query").
Provide basic PHID support so "DestructionEngine" can interact with the object more powerfully.
Test Plan:
- Ran migrations, checked data in database, saw sensible PHIDs assigned.
- Added a new email address to my account, saw it get a PHID.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20913
Summary: Ref T13444. Prepare to hook identity updates when user email addreses are destroyed.
Test Plan:
- Destroyed a user with `bin/remove destroy ... --trace`, saw email deleted.
- Destroyed an email from the web UI, saw email deleted.
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20912
Summary:
Ref T13444. Repository identities have, at a minimum, some bugs where they do not update relationships properly after many types of email address changes.
It is currently very difficult to fix this once the damage is done since there's no good way to inspect or rebuild them.
Take some steps toward improving observability and providing repair tools: allow `bin/repository rebuild-identities` to effect more repairs and operate on identities more surgically.
Test Plan: Ran `bin/repository rebuild-identities` with all new flags, saw what looked like reasonable rebuilds occur.
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20911
Summary: Ref T13444. Send all repository identity/detection through a new "DiffusionRepositoryIdentityEngine" which handles resolution and detection updates in one place.
Test Plan:
- Ran `bin/repository reparse --message ...`, saw author/committer identity updates.
- Added "goose@example.com" to my email addresses, ran daemons, saw the identity relationship get picked up.
- Ran `bin/repository rebuild-identities ...`, saw sensible rebuilds.
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20910
Summary: Ref T13444. This is an ancient event and part of the old event system. It is not likely to be in use anymore, and repository identities should generally replace it nowadays anyway.
Test Plan: Grepped for constant and related methods, no longer found any hits.
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20909
Summary:
Ref T13444. You can currently explicitly unassign an identity (useful if the matching algorithm is misfiring). However, this populates the "currentEffectiveUserPHID" with the "unassigned()" token, which mostly makes things more difficult.
When an identity is explicitly unassigned, convert that into an explicit `null` in the effective user PHID.
Then, realign "assigned" / "effective" language a bit. Previously, `withAssigneePHIDs(...)` actualy queried effective users, which was misleading. Finally, bulk up the list view a little bit to make testing slightly easier.
Test Plan:
- Unassigned an identity, ran migration, saw `currentEffectiveUserPHID` become `NULL` for the identity.
- Unassigned a fresh identity, saw NULL.
- Queried for various identities under the modified constraints.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20908
Summary:
Ref T13444. Currently, identities for a particular email address are queried with "LIKE" against a binary column, which makes the query case-sensitive.
- Extract the email address into a separate "sort255" column.
- Add a key for it.
- Make the query a standard "IN (%Ls)" query.
- Deal with weird cases where an email address is 10000 bytes long or full of binary junk.
Test Plan:
- Ran migration, inspected database for general sanity.
- Ran query script in T13444, saw it return the same hits for "git@" and "GIT@".
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20907
Summary:
Depends on D20919. Ref T13462. When editing milestones, we currently predict they will have no members for policy evaluation purposes. This isn't the right rule.
Instead, predict that their membership will be the same as the parent project's membership, and pass this hint to the policy layer.
See T13462 for additional context and discussion.
Test Plan:
- Set project A's edit policy to "Project Members".
- Joined project A.
- Tried to create a milestone of project A.
- Before: policy exception that the edit policy excludes me.
- After: clean milestone creation.
- As a non-member, tried to create a milestone. Received appropriate policy error.
Maniphest Tasks: T13462
Differential Revision: https://secure.phabricator.com/D20920
Summary:
Ref T13462. Currently, when testing milestone edit policies during creation, the project object does not behave like a milestone:
- it doesn't have a milestone number yet, so it doesn't try to access the parent project; and
- the parent project isn't attached yet.
Instead: attach the parent project sooner (which "should" be harmless, although it's possible this has weird side effects); and give the adjusted policy object a dummy milestone number if it doesn't have one yet. This forces it to act like a milestone when emitting policies.
Test Plan:
- Set "Projects" application default edit policy to "No One".
- Created a milestone I had permission to create.
- Before: failed with a policy error, because the project behaved like a non-milestone and returned "No One" as the effective edit policy.
- After: worked properly, correctly evaluting the parent project edit policy as the effective edit policy.
- Tried to create a milestone I did not have permission to create (no edit permission on parent project).
- Got an appropriate edit policy error.
Maniphest Tasks: T13462
Differential Revision: https://secure.phabricator.com/D20919
Summary:
Fixes T13461. Some applications provide hints about policy strength in the header, but these hints are inconsistent and somewhat confusing. They don't make much sense for modern objects with Custom Forms, which don't have a single "default" policy.
Remove this feature since it seems to be confusing things more than illuminating them.
Test Plan:
- Viewed various objects, no longer saw colored policy hints.
- Grepped for all removed symbols.
Maniphest Tasks: T13461
Differential Revision: https://secure.phabricator.com/D20918
Summary: Fixes T13456. These edits are remarkup edits and should attach files, trigger mentions, and so on.
Test Plan: Created a text panel, dropped a file in. After changes, saw the file attach properly.
Maniphest Tasks: T13456
Differential Revision: https://secure.phabricator.com/D20906
Summary:
Ref T13454. Fixes T13006. When a user provide us with an SSH private key and (possibly) a passphrase:
# Try to verify that they're correct by extracting the public key.
# If that fails, try to figure out why it didn't work.
Our success in step (2) will vary depending on what the problem is, and we may end up falling through to a very generic error, but the outcome should generally be better than the old approach.
Previously, we had a very unsophisticated test for the text "ENCRYPTED" in the key body and questionable handling of the results: for example, providing a passphrase when a key did not require one did not raise an error.
Test Plan:
Created and edited credentials with:
- Valid, passphrase-free keys.
- Valid, passphrased keys with the right passphrase.
- Valid, passphrase-free keys with a passphrase ("surplus passphrase" error).
- Valid, passphrased keys with no passphrase ("missing passphrase" error).
- Valid, passphrased keys with an invalid passphrase ("invalid passphrase" error).
- Invalid keys ("format" error).
The precision of these errors will vary depending on how helpful "ssh-keygen" is.
Maniphest Tasks: T13454, T13006
Differential Revision: https://secure.phabricator.com/D20905
Summary:
Fixes T13443. When a panel raises an exception during edit action generation, it currently escapes to top level. Instead, catch it more narrowly.
Additionally, mark "ChangesetSearchEngine" as not being a suitable search engine for use in query panels. There's no list view or search URI so it can't generate a sensible panel.
Test Plan:
- Added a changeset panel to a dashboard.
- Before: entire dashboard fataled.
- After: panel fataled narrowly, menu fatals narrowly, dashboard no longer permits creation of another Changeset query panel.
Maniphest Tasks: T13443
Differential Revision: https://secure.phabricator.com/D20902
Summary:
Ref T13442. Ref T13157. There's a secret URI to look at an object's hovercard in a standalone view, but it's hard to remember and impossible to discover.
In developer mode, add an action to "View Hovercard". Also add "View Handle", which primarily shows the object PHID.
Test Plan: Viewed some objects, saw "Advanced/Developer...". Used "View Hovercard" to view hovercards and "View Handle" to view handles.
Maniphest Tasks: T13442, T13157
Differential Revision: https://secure.phabricator.com/D20887
Summary:
Ref T13453. Some of the Asana integrations also need API updates.
Depends on D20899.
Test Plan:
- Viewed "asana.workspace-id" in Config, got a sensible GID list.
- Created a revision, saw the associated Asana task get assigned.
- Pasted an Asana link I could view into a revision description, saw it Doorkeeper in the metadata.
Maniphest Tasks: T13453
Differential Revision: https://secure.phabricator.com/D20900
Summary: Ref T13453. The Asana API has changed, replacing all "id" fields with "gid", including the "users/me" API call result.
Test Plan: Linked an Asana account. Before: error about missing 'id'. After: clean link.
Maniphest Tasks: T13453
Differential Revision: https://secure.phabricator.com/D20899
Summary:
Fixes T13452. We currently give users mixed signals about the interaction mode of this text: the cursor says "text" but the behavior is "grab".
Make the behavior "text" to align with the cursor. An alternate variation of this change is to remove the cursor, but this is preferable if it doesn't cause problems, since copying the task ID is at least somewhat useful.
Test Plan: In Safari, Firefox, and Chrome: selected and copied object names from workboard cards; and dragged workboard cards by other parts of their UI.
Maniphest Tasks: T13452
Differential Revision: https://secure.phabricator.com/D20898
Summary: Ref T13425. When a change adds or removes a block (vs adding or removing a document, or changing a block), we currently try to render `null` as cell content in the unified view. Make this check broader to catch both "no opposite document" and "no opposite cell".
Test Plan: {F7008772}
Subscribers: artms
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20897
Summary: Ref T13448. Minor UI issue: setting a "Fetch Refs" value does not highlight the associated menu item, but should.
Test Plan: Set only "Fetch Refs", now saw menu item highlighted.
Maniphest Tasks: T13448
Differential Revision: https://secure.phabricator.com/D20895
Summary:
Fixes T13448. We currently "git clone" to initialize repositories, but this will fetch too many refs if "Fetch Refs" is configured.
In modern Phabricator, there's no apparent reason to "git clone"; we can just "git init" instead. This workflow naturally falls through to an update, where we'll do a "git fetch" and pull in exactly the refs we want.
Test Plan:
- Configured an observed repository with "Fetch Refs".
- Destroyed the working copy.
- Ran "bin/repository pull X --trace --verbose".
- Before: saw "git clone" pull in the world.
- After: saw "git init" create a bare empty working copy, then "git fetch" fill it surgically.
Both flows end up in the same place, this one is just simpler and does less work.
Maniphest Tasks: T13448
Differential Revision: https://secure.phabricator.com/D20894
Summary:
Ref T13448. The default behavior of "git fetch '+refs/heads/master:refs/heads/master'" is to follow and fetch associated tags.
We don't want this when we pass a narrow refspec because of "Fetch Refs" configuration. Tell Git that we only want the refs we explicitly passed.
Note that this doesn't prevent us from fetching tags (if the refspec specifies them), it just stops us from fetching extra tags that aren't part of the refspec.
Test Plan:
- Ran "bin/repository pull X --trace --verbose" in a repository with a "Fetch Refs" configuration, saw only "master" get fetched (previously: "master" and reachable tags).
- Ran "git fetch --no-tags '+refs/*:refs/*'", saw tags fetched normally ("--no-tags" does not disable fetching tags).
Maniphest Tasks: T13448
Differential Revision: https://secure.phabricator.com/D20893
Summary:
Ref T13448. When "Fetch Refs" is configured:
- We switch to a narrow mode when running "ls-remote" against the local working copy. This excludes surplus refs, so we'll incorrectly detect that the local and remote working copies are identical in cases where the local working copy really has surplus refs.
- We rely on "--prune" to remove surplus local refs, but it only prunes refs matching the refspecs we pass "git fetch". Since these refspecs are very narrow under "Fetch Only", the pruning behavior is also very narrow.
Instead:
- When listing local refs, always list everything. If we have too much stuff locally, we want to get rid of it.
- When we identify surplus local refs, explicitly delete them instead of relying on "--prune". We can just do this in all cases so we don't have separate "--prune" and "manual" cases.
Test Plan:
- Created a new repository, observed from a GitHub repository, with many tags/refs/branches. Pulled it.
- Observed lots of refs in `git for-each-ref`.
- Changed "Fetch Refs" to "refs/heads/master".
- Ran `bin/repository pull X --trace --verbose`.
On deciding to do something:
- Before: since "master" did not change, the pull declined to act.
- After: the pull detected surplus refs and deleted them. Since the states then matched, it declined further action.
On pruning:
- Before: if the pull was forced to act, it ran "fetch --prune" with a narrow refspec, which did not prune the working copy.
- After: saw working copy pruned explicitly with "update-ref -d" commands.
Also, set "Fetch Refs" back to the default (empty) and pulled, saw everything pull.
Maniphest Tasks: T13448
Differential Revision: https://secure.phabricator.com/D20892
Summary:
Fixes T13446. Currently, the validation logic here rejects a rename like "alice" to "ALICE" (which changes only letter case) but this is a permissible rename.
Allow collisions that collide with the same user to permit this rename.
Also, fix an issue where an empty rename was treated improperly.
Test Plan:
- Renamed "alice" to "ALICE".
- Before: username collision error.
- After: clean rename.
- Renamed "alice" to "orange" (an existing user). Got an error.
- Renamed "alice" to "", "!@#$", etc (invalid usernames). Got sensible errors.
Maniphest Tasks: T13446
Differential Revision: https://secure.phabricator.com/D20890
Summary: Fixes T13445. Make the meaning of this condition more clear, since the current wording is ambiguous between "any of" and "all of".
Test Plan: Edited a Herald rule with a PHID list field ("Project tags"), saw text label say "include none of".
Maniphest Tasks: T13445
Differential Revision: https://secure.phabricator.com/D20889
Summary:
Fixes T13441. Internally, projects can be queried by depth, but this is not exposed in the UI.
Add a "Is root project?" contraint in the UI, and "minDepth" / "maxDepth" constraints to the API.
Test Plan:
- Used the UI to query root projects, got only root projects back.
- Used "project.search" in the API to query combinations of root projects and projects at particular depths, got matching results.
Maniphest Tasks: T13441
Differential Revision: https://secure.phabricator.com/D20886
Summary: Ref T13440. Give the table more obvious visual structure and get rid of the largely useless header columns.
Test Plan: Viewed table, saw a slightly cleaner result.
Maniphest Tasks: T13440
Differential Revision: https://secure.phabricator.com/D20885
Summary: Depends on D20883. Ref T13440. In most cases, all changes belong to the same repository, which makes the "Repository" column redundant and visually noisy. Show repository information in a section header.
Test Plan: {F6989932}
Maniphest Tasks: T13440
Differential Revision: https://secure.phabricator.com/D20884
Summary: Depends on D20882. Ref T13440. Instead of lists of "Differential Revisions" and "Commits", show all changes related to the task in a tabular view.
Test Plan: {F6989816}
Maniphest Tasks: T13440
Differential Revision: https://secure.phabricator.com/D20883
Summary: Ref T13440. This feature is used in only one interface which I'm about to rewrite, so throw it away.
Test Plan: Grepped for all affected symbols, didn't find any hits anywhere.
Maniphest Tasks: T13440
Differential Revision: https://secure.phabricator.com/D20882
Summary:
Ref T12164. Ref T13439. Commit hovercards don't currently show the repository. Although this is sometimes obvious from context, it isn't at other times and it's clearly useful/important.
Also, use identities to render author/committer information and show committer if the committer differs from the author.
Test Plan: {F6989595}
Maniphest Tasks: T13439, T12164
Differential Revision: https://secure.phabricator.com/D20881
