Summary:
Ref T11741. On recent-enough versions of MySQL, we would prefer to use InnoDB for fulltext indexes instead of MyISAM.
Allow `bin/storage adjust` to read actual and expected table engines, and apply adjustments as necessary.
We have one existing bad table that uses the wrong engine, `metamta_applicationemail`. This change corrects that table.
Test Plan:
- Ran `bin/storage upgrade`.
- Saw the adjustment phase apply this change properly:
```
>>>[463] <query> ALTER TABLE `local_metamta`.`metamta_applicationemail` COLLATE = 'utf8mb4_bin', ENGINE = 'InnoDB'
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11741
Differential Revision: https://secure.phabricator.com/D16941
Summary:
Ref T11741. InnoDB uses a stopwords table instead of a stopwords file.
During `storage upgrade`, synchronize the table from the stopwords file on disk.
Test Plan:
- Ran `storage upgrade`.
- Ran `select * from stopwords`, saw stopwords.
- Added some garbage to the table.
- Ran `storage upgrade`, saw it remove it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11741
Differential Revision: https://secure.phabricator.com/D16940
Summary:
Ref T11044.
- Use shorter lock names. Fixes T11916.
- These granular exceptions now always raise as a more generic "Cluster" exception, even for a single host, because there's less special code around running just one database.
Test Plan:
- Configured bad `mysql.port`, ran `bin/storage upgrade`, got a more helpful error message.
- Ran `bin/storage upgrade --trace`, saw shorter lock names.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044, T11916
Differential Revision: https://secure.phabricator.com/D16924
Summary: Fixes T11845. Users can still embed a text panel on the home page to give it some ambiance.
Test Plan: Wrote an autoplay video as a comment, saw it in feed. Before change: autoplay. After change: no auto play. On task: still autoplay.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11845
Differential Revision: https://secure.phabricator.com/D16920
Summary:
Ref T11044. Few issues here:
- The `PhutilProxyException` is missing an argument (hit this while in read-only mode).
- The `$ref_key` is unused.
- When you add a new master to an existing cluster, we can incorrectly apply `.php` patches which we should not reapply. Instead, mark them as already-applied.
Test Plan:
- Poked this locally, but will initialize `secure004` as an empty master to be sure.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16916
Summary: Ref T11044. Fixes T11672. In T11672, persistent connections seem to work fine, but they can require `max_connections` and other settings to be raised. Since most users don't need them, make them an advanced option.
Test Plan: Configured persistent connections, loaded some pages, observed persistent connections get used.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044, T11672
Differential Revision: https://secure.phabricator.com/D16913
Summary:
Ref T11044. Sometimes we have a sequence of patches like this:
- `01.newtable.sql`: Adds a new table to Files.
- `02.movedata.php`: Moves some data that used to live in Tokens to the new table.
This is fairly rare, but not unheard of. More commonly, we can have this sequence:
- `03.newtable.sql`: Add a new column to Phame.
- `04.setvalue.php`: Copy data into that new column.
In both cases, when applying database-by-database, we can get into trouble.
- In the first case, if Files is on a different master, we'll try to move data into a new table before creating the table.
- In the second case, if Phame is on a different master, the PHP patch will connect to it before we add the new column.
In either case, we try to interact with tables or columns which don't exist yet.
Instead, apply each patch in order, to all databases which need it. So we'll apply `01.newtable.sql` EVERYWHERE first, then move on.
In the case of PHP patches, we also now only apply them once, since they never make schema changes. It should normally be OK to apply them more than once safely, but this is a little faster and a little safer if we ever make a mistake.
Test Plan:
- Ran `bin/storage upgrade` on single-host and clustered setups.
- Initialized new storage on single-host and clustered setups.
- Upgraded again after initialization.
- Ran with `--apply`.
- Ran with `--dry-run`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16912
Summary:
Ref T11044. This was old Facebook cruft for reading configuration from SMC (and maybe doing some other questionable things). See D183.
(See also D175 for discussion of this from 2011.)
In modern Phabricator, you can subclass `SiteConfig` to provide dynamic configuration, and we do so in the Phacility cluster. This lets you change any config, and change in response to requests (e.g., for instancing) and is generally more powerful than this mechanism was.
This configuration provider theoretically let you roll your own replication or partitioning, but in practice I believe no one ever did, and no one ever could have anyway without more support in the upstream (for migrations, read-after-write, etc).
Test Plan:
- Grepped for removed option.
- Browsed around with clustering off.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16911
Summary:
Ref T11044. One popular tool in a modern operations environment is Puppet. The primary purpose of this tool is to randomly revert hosts to older or different configurations.
Introducing an element of chaotic unpredictability into operations trains staff to be on high alert at all times, rather than lulled into complacency by predictability or consistency.
When Puppet reverts a Phabricator host's configuration to an older version, we might start writing data to a lot of crazy places where it shouldn't go. This will create a big sticky mess that is virtually impossible to undo, mostly because we'll get two files with ID 123 or two tasks with ID 456 or whatever else and good luck with that.
Instead, after changing the partition layout, require `bin/storage partition` to be run. This writes a copy of the config everywhere.
Then, when we start serving web requests, make sure every database has the exact same config. This will foil Puppet by refusing to run requests on hosts it has reverted.
Test Plan:
- Changed partition configuration.
- Ran Phabricator.
- FOILED!
- Ran `bin/storage partition` to sync config.
- Things worked again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16910
Summary:
Ref T11044. Fixes T10931. This option has essentially never been useful for anything, and we've picked the best implementation for a long time (MySQLi if available, MySQL if not).
I am not aware of any reason to ever set this manually. If someone comes up with some bizarre but legitimate use case that I haven't thought of, we can modularize it.
Test Plan: Browsed around. Grepped for `mysql.implementation`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10931, T11044
Differential Revision: https://secure.phabricator.com/D16909
Summary:
I frequently run into a situation where I want to kill tasks that have accumulated a lot of failures regardless of what class they are. Or I'll want to kill every worker of a certain class but only if it has failed at least once. This change allows me to run `./bin/worker cancel --class <MYCLASS> --min-failure-count 5` to only kill tasks with at least 5 failed attempts.
The `--min-failure-count N` argument can be used by itself as well as with `--class CLASSNAME`. I don't think it makes sense for it to work with `--id ID`, but I'm not dead set on that or anything.
Test Plan: I ran the worker management workflow with and without the `--min-failure-count` argument and it worked as expected.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley, yelirekim
Differential Revision: https://secure.phabricator.com/D16906
Summary:
Fixes T10759. Fixes T11817. This runs all the general sanity/configuration checks on all the active servers.
None of these warnings are very important, and this doesn't change any logical stuff.
Depends on D16904.
Test Plan: Painstakingly triggered each warning, verified that they rendered correctly and that messages told me which host was affected.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759, T11817
Differential Revision: https://secure.phabricator.com/D16905
Summary:
Ref T10759. Check master/replica status during startup.
After D16903, this also means that we check this status after a database comes back online after being unreachable.
If a master is replicating, fatal (since this can do a million kinds of bad things).
If a replica is not replicating, warn (this just means the replica is behind so some data is at risk).
Also: if your masters were actually configured properly (mine weren't until this change detected it), we would throw away patches as we applied them, so they would only apply to the //first// master. Instead, properly apply all migration patches to all masters.
Test Plan:
- Started Phabricator with a replicating master, got a fatal.
- Stopped replication on a replica, got a warning.
- With two non-replicating masters, upgraded storage.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16904
Summary:
Ref T10759. Currently, these checks run only against configured masters. Instead, check every host.
These checks also sort of cheat through restart during a recovery, when some hosts will be unreachable: they test for "disaster" by seeing if no masters are reachable, and just skip all the checks in that case.
This is bad for at least two reasons:
- After recent changes, it is possible that //some// masters are dead but it's still OK to start. For example, "slowvote" may have no master, but everything else is reachable. We can safely run without slowvote.
- It's possible to start during a disaster and miss important setup checks completely, since we skip them, get a clean bill of health, and never re-test them.
Instead:
- Test each host individually.
- Fundamental problems (lack of InnoDB, bad schema) are fatal on any host.
- If we can't connect, raise it as a //warning// to make sure we check it later. If you start during a disaster, we still want to make sure that schemata are up to date if you later recover a host.
In particular, I'm going to add these checks soon:
- Fatal if a "master" is replicating.
- Fatal if a "replica" is not replicating.
- Fatal if a database partition config differs from web partition config.
- When we let a database off with a warning because it's down, and later upgrade it to a fatal because we discover it is broken after it comes up again, fatal everything. Currently, we keep running if we "discover" the presence of new fatals after surviving setup checks for the first time.
Test Plan:
- Configured with multiple masters, intentionally broke one (simulating a disaster where one master is lost), saw Phabricator still startup.
- Tested individual setup checks by intentionally breaking them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10759
Differential Revision: https://secure.phabricator.com/D16902
Summary:
Ref T11044. I'm going to hold this until after the release cut, but I think it's good to go.
This allows installs to configure multiple masters in `cluster.databases` and partition applications across them (for example, put Maniphest on a dedicated database).
When we make a Maniphest connection we go look up which master we should be hitting first, then connect to it.
This has at least approximately been planned for many years, so the actual change is largely just making sure that your config makes sense.
Test Plan:
- Configured `db001.epriestley.com` and `db002.epriestley.com` as master/master.
- Partitioned applications between them.
- Interacted with various applications, saw writes go to the correct host.
- Viewed "Database Servers" and saw partitioning information.
- Ran schema upgrades.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16876
Summary: Ref T11034. Try to produce a roughly-one-sentence summary instead of a roughly-one-paragraph summary for the browse dialog.
Test Plan:
- Added unit tests, ran unit tests.
- Wrote a longer summary for a project, browsed to it, saw a shorter summary.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11034
Differential Revision: https://secure.phabricator.com/D16892
Summary:
Fixes T11809. Ref
- Explicitly document the summary icon hints -- I don't think these are too hard to figure out (and maybe this stuff should just go in the tooltips) but we can start here.
- Use color + shape to distinguish between "cancelled" and "declined", not just color (for users with vision accessibility issues).
- Translate a "minute(s)" string into sensible English.
- Use RSVP status on the month view green circle thing.
Test Plan:
- Read docs.
- Looked at month view.
- Read reminder mail.
- Viewed month view mobile view.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11809
Differential Revision: https://secure.phabricator.com/D16872
Summary: Depends on D16847. Ref T11044. This updates the remaining storage-related workflows from the CLI to accommodate multiple masters.
Test Plan:
- Configured multiple masters.
- Ran all `bin/storage` workflows.
- Ran `arc unit --everything`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16848
Summary:
Depends on D16115. Ref T11044. In the brave new world of multiple masters, we need to check the schemata on each master when looking for missing storage patches, keys, schema changes, etc.
This realigns all the "check out what's up with that schema" calls to work for multiple hosts, and updates the web UI to include a "Server" column and allow you to browse per-server.
This doesn't update `bin/storage`, so it breaks things on its own (and unit tests probably won't pass). I'll update that in the next change.
Test Plan: Configured local environment in cluster mode with multiple masters, saw both hosts' status reported in web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16847
Summary:
Ref T11044. This moves toward partitioned application databases:
- You can define multiple masters.
- Convert all the easily-convertible code to become multi-master aware.
This doesn't convert most of `bin/storage` or "Config > Database (Stuff)" yet, as both are quite involved. They still work for now, but only operate on the first master instead of all masters.
Test Plan: Configured multiple masters, browsed around, ran `bin/storage` commands, ran `bin/storage --host ...`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16115
Summary:
This has been replaced by `PolicyCodex` after D16830. Also:
- Rebuild Celerity map to fix grumpy unit test.
- Fix one issue on the policy exception workflow to accommodate the new code.
Test Plan:
- `arc unit --everything`
- Viewed policy explanations.
- Viewed policy errors.
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D16831
Summary:
Ref T5267. When extrating data from `pht()` calls, also extract the argument types and export them into the map so they can be used by consumers.
We recognize plurals (`phutil_count()`, `new PhutilNumber`) and genders (`phutil_person()`). We'll need to annotate the codebase for those, since they're currently runtime-only.
Test Plan:
Rebuilt extraction maps, got data like this (note "number" type annotation).
```
"Scaling pool \"%s\" up to %s daemon(s).": {
"uses": [
{
"file": "/daemon/PhutilDaemonOverseer.php",
"line": 378
}
],
"types": [
null,
"number"
]
},
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5267
Differential Revision: https://secure.phabricator.com/D16823
Summary:
Ref T4788. I thought I implemented this, but actualy didn't.
When we're in the "mid-sized" fallback mode (graph has more than 100 nodes, but not more than than 100 parents/children), don't actually draw the graph. It's almost always uninteresting and huge.
Instead, this just renders a list of direct parents, then the task, then the direct children, which is pretty straightforward.
Test Plan: Set limit to 5, saw mid-sized fallback graph with no actual graph drawing.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16816
Summary: Ref T5267. Fix one minor bug (paths were not being resolved properly) and one minor string issue (missing `%d` in a string).
Test Plan: Extracted strings, got a cleaner result.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5267
Differential Revision: https://secure.phabricator.com/D16808
Summary: Ref T7931. This is still quite rough, but should technically send vaguely-useful email as part of the standard trigger infrastructure.
Test Plan: Ran `bin/phd start`, created an event shortly, saw reminder email send in `bin/mail list-outbound`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7931
Differential Revision: https://secure.phabricator.com/D16784
Summary: Fixes T11799. This string is varying on the first parameter, but should vary on the second parameter.
Test Plan: Ran `bin/garbage set-policy ...`, saw proper translation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11799
Differential Revision: https://secure.phabricator.com/D16769
Summary:
Depends on D16755. Right now, we build a setup check map (to run preflight checks), then later load libraries.
This means any checks included in third-party libraries don't get added to the map, and no longer run.
(These are rare, but Phacility has a couple).
Instead, delete the caches after loading extra libraries.
Test Plan: With this and D16755, re-ran setup checks and saw Phacility setup checks run.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16756
Summary:
Fixes T11771. Adds a lock around each GC process so we don't try to, e.g., delete old files on two machines at once just because they're both running trigger daemons.
The other aspects of this daemon (actual triggers; nuance importers) already have separate locks.
Test Plan: Ran `bin/phd debug trigger --trace`, saw daemon acquire locks and collect garbage.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11771
Differential Revision: https://secure.phabricator.com/D16739
Summary: Ref T11766. When users run `git pull` or similar, log the operation in the pull log.
Test Plan: Performed SSH pulls, got a log in the database. Today, this event log is purely diagnostic and has no UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11766
Differential Revision: https://secure.phabricator.com/D16738
Summary: Ref T11773. This is an initial first step toward a more complete solution, but should make the worst case much less bad: prior to this change, the worst case was "30 second exeuction timeout". After this patch, the worst case is "no results + explanatory message", which is strictly better.
Test Plan:
Made all feed stories fail policy checks, loaded home page.
- Before adding overheating: 9,600 queries / 20 seconds
- After adding overheating: 376 queries / 800ms
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11773
Differential Revision: https://secure.phabricator.com/D16735
Summary:
Ref T10747. Rough flow is:
- Run a query.
- Select a new "Export Events..." action.
- This lets you define an "Export", which has a unique URL you can paste into Google Calendar or Calendar.app or whatever.
Most of this does nothing yet but here's the boilerplate.
Test Plan: Doesn't do anything yet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10747
Differential Revision: https://secure.phabricator.com/D16675
Summary:
Ref T11672. At low loads, this causes us to use more connections, which is pushing some installs over the default limits.
Rather than trying to walk users through changing `max_connections`, `open_files_limit`, `fs.file-max`, `ulimit`, etc., just put things back for now. After T11044 we should have headroom to use persistent connections within the default limits on all reasonable systems..
Test Plan: Loaded Phabricator, poked around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11672
Differential Revision: https://secure.phabricator.com/D16591
Summary: Fixes T11676. Instead of trying to fit task titles to the display, truncate them and let the table scroll.
Test Plan:
Table now scrolls when cramped:
{F1843396}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11676
Differential Revision: https://secure.phabricator.com/D16583
Summary:
Fixes T11677. This makes two minor adjustments to the repository import daemons:
- The first step ("Message") now queues at a slightly-lower-than-default (for already-imported repositories) or very-low (for newly importing repositories) priority level.
- The other steps now queue at "default" priority level. This is actually what they already did, but without this change their behavior would be to inherit the priority level of their parents.
This has two effects:
- When adding new repositories to an existing install, they shouldn't block other things from happening anymore.
- The daemons will tend to start one commit and run through all of its steps before starting another commit. This makes progress through the queue more even and predictable.
- Before, they did ALL the message tasks, then ALL the change tasks, etc. This works fine but is confusing/uneven/less-predictable because each type of task takes a different amount of time.
Test Plan:
- Added a new repository.
- Saw all of its "message" steps queue at priority 4000.
- Saw followups queue at priority 2000.
- Saw progress generally "finish what you started" -- go through the queue one commit at a time, instead of one type of task at a time.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11677
Differential Revision: https://secure.phabricator.com/D16585
Summary:
Fixes T11675. This capability was erroneously (probably?) removed in D14766.
This search implementation (which uses exact match) probably isn't perfect for all cases of "text" fields, but empirically it seems to be what a significant number of users are after.
Test Plan:
Searched for a custom text field value.
{F1843383}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11675
Differential Revision: https://secure.phabricator.com/D16582
Summary:
Ref T11672. Depends on D16577. When establishing a connection from a webserver context, try to use persistent connections.
The hope is that this will fix outbound port exhaustion issues experienced on repository hosts handling large queue volumes.
Test Plan:
Added this to a page:
```lang=php
$tables = array(
new PhabricatorUser(),
new ManiphestTask(),
new DifferentialRevision(),
new PhabricatorRepository(),
new PhabricatorPaste(),
);
$ids = array();
foreach ($tables as $table) {
$conn = $table->establishConnection('r');
$cid = queryfx_one(
$conn,
'SELECT CONNECTION_ID() cid');
$ids[get_class($table)] = $cid['cid'];
}
var_dump($ids);
```
Reloaded the page a bunch of times and saw no reissued connections (the pool seems to keep a particular connection bound to a particular database), but did see connection reuse across requests.
That is, across reloads the same connection IDs appeared, but the same connection ID never appeared twice in the same request. This is what we want.
Also googled for issues with persistent connections, but everything I found was unconcerning and obscure (local variables and other very complex state that we don't use), and a bunch of the docs are reassuring (transactions, etc., get reset properly).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11672
Differential Revision: https://secure.phabricator.com/D16578
Summary:
Ref T11613. In D16503/T11598 I refined the setup flow to improve messaging for early-stage setup issues, but failed to fully untangle things.
We sometimes still try to access a cache which uses configuration before we build configuration, which causes an error.
Instead, store "are we in flight / has setup ever worked?" in a separate cache which doesn't use the cache namespace. This stops us from trying to read config before building config.
Test Plan:
Hit bad extension error with a fake extension, got a proper setup help page:
{F1812803}
Solved the error, reloaded, broke things again, got a "friendly" page:
{F1812805}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11613
Differential Revision: https://secure.phabricator.com/D16542
Summary: Fixes T11607.
Test Plan:
- Made a comment using `{key ...}`.
- Used `bin/mail show-outbound --id X --dump-html > test.html` to review HTML:
{F1805304}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11607
Differential Revision: https://secure.phabricator.com/D16523
Summary:
Fixes T11583.
- When users run `bin/storage upgrade` for the first time on a new install, we currently give them a prompt which feels rough and which they can only reasonably ever answer "yes" to.
- We generally use cautionary language ("found issues with schema") in this workflow. Adjustments are now routine, so use more neutral and progress-oriented language ("found adjustments to apply").
Test Plan:
- Ran `bin/storage upgrade --namesapce kappa123`, got an adjustment using neutral language without prompting.
- Dropped a key, ran `bin/storage upgrade`, got normal workflow (but with more neutral language).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11583
Differential Revision: https://secure.phabricator.com/D16509
Summary: Fixes T11593. We ask for a list of values when searching for custom "link" fields, but don't handle it correctly when actually construcitng a query.
Test Plan:
Added this custom field:
```
{
"mycompany.target-version": {
"name": "Target Version",
"type": "link",
"search": true
}
}
```
Set a task to "beta". Let daemons index it. Queried for:
```
constraints: {
"custom.mycompany.target-version": [
"beta"
]
}
```
Got just one result back.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11593
Differential Revision: https://secure.phabricator.com/D16508
Summary: Ref T11589. Provide a way for scripts to say "just continue if database config fails", and use it in `bin/config` and `bin/storage`.
Test Plan:
- Broke database config.
- Ran `bin/config`, worked fine.
- Ran `bin/storage`, got helpful "set up the database" message.
- Ran `bin/repository`, got fatal.
- Ran normal site with valid/invalid config, got proper feedback.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16502
Summary:
Ref T11589. This runs:
- preflight checks (critical checks: PHP version stuff, extensions);
- configuration;
- normal checks.
The PHP checks are split into critical ("bad version") and noncritical ("sub-optimal config").
I tidied up the extension checks slightly, we realistically depend on `cURL` nowadays.
Test Plan:
- Faked a preflight failure.
- Hit preflight check.
- Got expected error screen.
- Loaded normal pages.
- Hit a normal setup check.
- Used DarkConsole "Startup" tab to verify that preflight checks take <1ms to run (we run them on every page without caching, at least for now, but they only do trivial checks like PHP versions).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11589
Differential Revision: https://secure.phabricator.com/D16500
Summary: Caught one of these while reviewing docs, grepped for the other one.
Test Plan: `grep`, reading
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16498
If the namespace is something like "test_example" we currently fail to
renamespace the dump.
(Cowboy committing this since this is currently blocking a data export.)
Test Plan:
- Renamespaced a local dump, examined the output, saw 60 create / 60 use, reimported it.
- Will export in production.
Auditors: chad
Summary:
Fixes T11577. When we connect to a host and try to select a database which does not exist, we currently treat it as though the host wasn't reachable.
This isn't correct, and prevents storage from being initialized while already in cluster mode, since the "config" database won't exist yet the first time we connect.
Instead, distinguish between `AphrontSchemaQueryException` (thrown on connection if the requested database is not present) and other errors.
Test Plan:
- Put Phabricator into cluster database mode (`cluster.databases = ...`).
- Swapped `storage.default-namespace` to force initialization of a new install.
- Ran `bin/storage upgrade`.
- Before patch: Immediate fatal about unreachablility.
- After patch: Database initialized.
- Also ran initialization steps in tranditional single-host mode (`cluster.databases` empty, `mysql.host` configured).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11577
Differential Revision: https://secure.phabricator.com/D16489
Summary:
Ref T10867 for original use case. This workflow provides a plausible way for administrators to stop the daemons when performing upgrades or maintenance, then bring those daemons back up without resulting in the failure of builds that were running at the time.
On our organization's phab install, builds are running 24/7. The majority of these builds last for at least several minutes, and contain build steps which fail if interrupted and then resumed, as happens when turning daemons on and off.
Instead of allowing these build steps to resume execution as normal, this workflow will instruct active builds to restart their entire build process instead of just resuming whichever step they were on.
Test Plan:
contrived a build plan which would fail if resumed partway through:
- lease a working copy
- command `touch restart_{build.id}`
- command `test -e restart_{build.id} && rm restart_{build.id} && sleep 60`
followed old procedure:
- run a few of these builds manually
- `./bin/phd stop`
- `./bin/phd start`
- saw the builds fail
followed new procedure:
- run a few of these builds manually
- `./bin/phd stop`
- `./bin/harbormaster restart --active`
- `./bin/phd start`
- saw the builds pass
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T10867
Differential Revision: https://secure.phabricator.com/D16485
Summary: Ref T11132, significantly cleans up the Config app, new layout, icons, spacing, etc. Some minor todos around re-designing "issues", mobile support, and maybe another pass at actual Group pages.
Test Plan: Visit and test every page in the config app, set new items, resolve setup issues, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam, Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16468
Summary: Ref T11132. This gets rid of the red bar for admins and instead shows a new menu item next to notifications/chat if there are unresolved configuration issues. Menu goes away if there are no issues. May move this later into the bell icon, but think think might be the right place to start especially for NUX and updates. Maybe limit the number of items?
Test Plan:
Tested with some, lots, and no config issues.
{F1790156}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16461
Summary: Previously, the chatbot docs instructed users to get certificates for the conduit API and put the cert in a `conduit.cert` config key. In order to get the chatbot to work, I needed to instead get an API key and put it in the `conduit.token` config entry.
Test Plan: Doc fix. Tried the new documented way and it worked.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16443
Summary: Fixes T11508. The config entry `remarkup.ignored-object-names` already contains a blacklist of object names that should be ignored in the web UI. This change makes that blacklist also apply to the chatbot. This makes it possible to have a chatbot ignore things like V1, V2, Q1 and any other phrases the user may not want to generate links to objects.
Test Plan: Create objects (tasks, slowvotes, etc.) then mention the object names in chat (with the bot running). The bot should respond with helpful links to the given objects. Then add the object names to the blacklist through the config web UI. This apparently triggers the bot to restart itself. Then mention the object names in chat again. The bot should no longer respond with links because those object names have been added to the blacklist regex.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Maniphest Tasks: T11508
Differential Revision: https://secure.phabricator.com/D16442
Summary:
Ref T11522. This tries to reduce the cost of rewriting a repository by making handles smarter about rewritten commits.
When a handle references an unreachable commit, try to load a rewrite hint for the commit. If we find one, change the handle name to "OldHash > NewHash" to provide a strong hint that the commit was rewritten and that copy/pasting the old hash (say, to the CLI) won't work.
I think this notation isn't totally self-evident, but users can click it to see the big error message on the page, and it's at least obvious that something weird is going on, which I think is the important part.
Some possible future work:
- Not sure this ("Recycling Symbol") is the best symbol? Seems sort of reasonable but mabye there's a better one.
- Putting this information directly on the hovercard could help explain what this means.
Test Plan: {F1780719}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16437
Summary: Switches over to new property UI boxes, splits core and apps into separate pages. Move Versions into "All Settings". I think there is some docs I likely need to update here as well.
Test Plan: Click on each item in the sidebar, see new headers.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16429
Summary:
Fixes T11490. Currently, this query can not use a key and the table size may be quite large.
Adjust the query so it can use a key for both selection and ordering, and add that key.
Test Plan: Ran `EXPLAIN` on the old query in production, then added the key and ran `EXPLAIN` on the new query. Saw key in use, and "rows" examined drop from 29,273 to 15.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11490
Differential Revision: https://secure.phabricator.com/D16423
Summary:
Ref T6996. Depends on D16407. This does the same stuff as D16407, but for `bin/storage renamespace`. In particular:
- Support writing directly to a file (so we can get good errors on failure).
- Support in-process compression.
Also add support for reading out of a `storage dump` subprocess, so we don't have to do a dump-to-disk + renamespace + compress dance and can just stream out of MySQL directly to a compressed file on disk.
This is used in the second stage of instance exports (see T7148).
It would be nice to share more code with `bin/storage dump`, and possibly to just make this a flag for it, although we still do need to do the file-based version when importing (vs exporting). I figured that was better left for another time.
Test Plan:
Ran `bin/storage renamespace --live --output x --from A --to B --compress --overwrite` and similar commands.
Verified that a compressed, renamespaced dump came out of the other end.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6996
Differential Revision: https://secure.phabricator.com/D16410
Summary:
Ref T6996. If you do this kind of thing in the shell, you don't get a good error by default if the `dump` command fails:
```
$ bin/storage dump | gzip > output.sql.gz
```
This can be worked around with some elaborate bash tricks, but they're really clunky and uninintuitive.
We also need to do this in several places (while writing backups; while performing exports), and I don't want to copy clunky bash tricks all over the codebase.
Instead, provide `--output` and `--compress` flags which just do this processing inside `bin/storage dump`. It will fail appropriately if any of the underlying operations fail. This also makes the write a little safer (refuses to overwrite) and the code more reusable.
Test Plan:
- Did three dumps, with no flags, `--output`, and `--output --compress`.
- Verified all three took similar amounts of time and were identical except for "Date Exported" timestamps in comments (except that the compressed one was compressed).
- Used `gunzip` to examine the compressed one, verified it was really compressed.
- Faked a write error, saw properly command behavior (clean up file + exit with error).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6996
Differential Revision: https://secure.phabricator.com/D16407
Summary:
The cluster synchronization code runs either actively (before returning a response to `git clone`, for example) or passively (routinely, as the daemons update reposiories).
The active sync runs as the web user (if running `git clone http://...`) or the VCS user (if running `git clone ssh://...`). But the passive sync runs as the daemon user.
All of these sync processes need to run actual commands as the daemon user (`git fetch ...`).
For the active ones, we must `sudo`.
For the passive ones, we're already the right user. We run the same code, and end up trying to sudo to ourselves, which `sudo` isn't happy about by default.
Depending on how `sudo` is configured and which users things are running as this might work anyway, but it's silly and if it doesn't work it requires you to go make non-obvious, weird config changes that are unintuitive and somewhat nonsensical. This is probably worse on the balance than adding a bit of complexity to the code.
Instead, test which user we're running as. If it's already the right user, don't sudo.
Test Plan:
- Ran `bin/repository update --trace` as daemon user, saw no more `sudo`.
- Ran a `git clone` to make sure that didn't break.
Reviewers: chad, avivey
Reviewed By: avivey
Differential Revision: https://secure.phabricator.com/D16391
Summary:
Ref T11458. Depends on D16388. Currently, we're very aggressive about closing connections in the taskmaster daemons.
This can end up taking up a lot of resources. In particular, because the outgoing port for outbound connections normally can not be reused for 60 seconds after a connection closes, we may exhaust outbound ports on the host if there's a big queue full of stuff that's being processed very quickly.
At a minimum, we //always// are holding open a `worker` connection, which we always need again right away. So even in the best case we end up opening/closing this about once per second and each daemon takes up about ~60 outbound ports when it should take up ~1.
So, make two adjustments:
- First, only close connections which we haven't issued a query on in the last 60 seconds. This should prevent us from closing connections that we'll need again immediately in most cases. In the worst case, we shouldn't be eating up any extra ports under default TCP behavior.
- Second, explicitly close connections. We were relying on implicit/GC behavior (maybe as a holdover from very long ago, before we got connection wrappers in place?), which probably did about the same thing but isn't as predictable and can't be profiled or instrumented.
Test Plan:
This is somewhat difficult to test completely convincingly in isolation since the problem behavior depends on production scales and the workload, and to some degree on configuration.
I tested that this stuff baiscally works by adding logging to connect/close and running the daemons, verifying that they churned connections a lot before this change (e.g., ~1/s even at no load) and churn rarely afterward (e.g., almost never at no load).
I ran some workload through them to make sure I didn't completely break anything.
The best real test is just seeing how production responds. Current inbound/outbound connections on `secure001` are 1,200:
```
secure001 $ netstat -t | grep :mysql | wc -l
1164
```
Current outbound from `repo001` are 18,600:
```
repo001 $ netstat -t | grep :mysql | wc -l
18663
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11458
Differential Revision: https://secure.phabricator.com/D16389
Summary:
Fixes T11446. We can raise the misleading error:
> No valid databases are configured!
...when a valid master is configured but unreachable.
Instead, more carefully raise either "nothing is configured" or "nothing is reachable".
Test Plan: Configured only a master, artificially severed it, got "nothing is reachable" instead of "nothing is configured".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11446
Differential Revision: https://secure.phabricator.com/D16386
Summary:
Fixes T11453. Currently, commit message summaries are limited to 80 bytes. This may only be 20-40 characters for CJK languages or langauges with Cyrillic script.
Increase storage size to 255, then truncate to the shorter of 255 bytes or 80 glyphs. This preserves the same behavior for latin languages, but is less tight for Russian, etc.
Some minor additional changes:
- Provide a way to ask "how much data fits in this column?" so we don't have to duplicate column lengths across summary checks or UI errors like "title too long".
- Remove the `text80` datatype, since no other columns use it and we have no use cases (or likely use cases) for it.
Test Plan:
- Made a commit with a Cyrillic title, saw reasonable summarization in UI:
{F1757522}
- Added and ran unit tests.
- Grepped for removed `SUMMARY_MAX_LENGTH` constant.
- Grepped for removed `text80` data type.
Reviewers: avivey, chad
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T11453
Differential Revision: https://secure.phabricator.com/D16385
Summary:
Ref T11404. This improves things by about 10%:
- Use `PhutilClassMapQuery`, which has slightly better caching.
- Do a little less work to generate pretty error messages.
- Make the "disabled" code a little faster (and sort of clearer, too?) by doing less fancy stuff.
These are pretty minor adjustments and not the sort of optimizations I'd make normally, but this code gets called ~100x (once per revision) and generates ~10 fields normally, so even small savings can amount to something.
(I also want to try to make `arc` faster in the next update, and improving Conduit performance helps with that.)
Test Plan: Ran `differential.revision.search`, saw cost drop from ~195ms to ~170ms locally.
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16355
Summary:
Ref T11404. On my system, this improves performance by 10-15% for `differential.revision.search`.
`PhutilTypeSpec` provides high quality typechecking and is great for user-facing things that need good error messages.
However, it's also a bit slow, and pointless here (the API is internal and it only has one possible option).
I think I added this after writing `checkMap` just because I wanted to use it more often. My desire is sated after finding many reasonable ways to use it to give users high-quality error messages about things like configuration files.
Test Plan: Profiled `differential.revision.search` before and after change, saw wall time drop from ~220ms to ~195ms.
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16354
Summary:
Ref T11404. Depends on D16350.
Currently, custom fields can issue "N+1" queries in some cases, so querying 100 revisions issues 100 extra queries.
This affects all `*.search` endpoints for objects with custom fields, and some older endpoints (notably `differential.query`).
This change bulk loads "normal" custom fields, which gets rid of some of these queries. Instead of loading fields for each object, we build a big list of all fields and load them all at once.
The next change will tackle the remaining inefficient edge queries.
Test Plan:
- Configured a custom field with normal database storage in Differential.
- Ran `differential.query`, looking at custom fields in results for correctness.
- Ran `differential.revision.search`, looking at custom fields in results for correctness.
- In both cases, observed queries drop from `3N` to `2N` (all the "normal" custom field stuff got bulk loaded).
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16351
Summary:
Ref T11404. Currently, SearchEngineAttachments can bulk-load data but SearchEngineExtensions can not.
This leads to poor performance of custom fields. See T11404 for discussion.
This changes the API to support a bulk load + format pattern like the one Attachments use. The next change will use it to bulk-load custom field data.
Test Plan:
- Ran `differential.query`, `differential.revision.search` as a sanity check.
- No behavioral changes are expected
- See next revision.
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16350
Summary: Fixes T11392. If some tasks are restricted, we only have PHIDs for them, not objects. Just use the PHIDs instead.
Test Plan: {F1741335}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11392
Differential Revision: https://secure.phabricator.com/D16345
Summary:
Ref T4788. This gives us a new level of graceful degradation, so now we show:
- Zero through 100 connected tasks: whole graph.
- More than 100 connnected tasks, but fewer than 100 direct parents/subtasks: just parents and subtasks, with "..." to hint that the graph is cut off.
- More than 100 parents and children: just the "sorry, too much stuff" error message.
Test Plan: {F1740882}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16344
Summary:
Fixes T11386. Ref T4788.
- Apparently fix weird strikethrough effect? Spooky!
- Provide a little icon hint in the left column about which tasks are direct parents/children, vs just reachable somehow. I don't think this is super useful/important, but seems maybe nice?
Test Plan: {F1740779}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788, T11386
Differential Revision: https://secure.phabricator.com/D16342
Summary:
Ref T8116. Partially scavenged from D14152. This roughs in a new Packages application for Arcanist extensions and third-party applications, and adds a "Publisher" object.
A "Publisher" represents an individual or entity who is publishing a package, like "Phacility". It's explicitly //not// necessarily the original author -- just the primary entity vouching for the safety of the code.
A publisher just has a name and a unique key for now. For example, Phacility might have "Phacility" and "phacility", respectively.
Unique keys are immutable, e.g., the package "phacility/arcanist" will always be exactly the same package by exactly the same publisher.
Test Plan: {F1731621}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8116
Differential Revision: https://secure.phabricator.com/D16314
Summary:
`mysql` has the magic feature of ignoring port arguments and using the socket when connecting to localhost.
This flag makes it not do that.
Test Plan: `./bin/storage shell`, execute `status`, see `Connection: localhost via TCP/IP`.
Reviewers: joshuaspence, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16317
Summary:
Ref T4788. One install has some particularly impressive task graphs which are thousands of nodes large.
The current graph is pretty broken in these cases. For now, just render a "too big to show" message. In the future, I'd plan to finesse this (e.g., show parents/children, show links to parents/children, etc).
Test Plan:
- Viewed a normal task.
- Set limit to 3, viewed a task with graph size 6, saw an error message.
- Viewed a revision stack graph (unaffected).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16295
Summary:
Fixes T8911. This corrects several issues which could crop up if a calendar event query matched more results than the query limit:
- The desired order was not applied by the SearchEngine -- it applies the first builtin order instead. Provide a proper builtin order.
- When we generate ghosts, we can't do limiting in the database because we may select and then immediately discard a large number of parent events which are outside of the query range.
- For now, just don't limit results to get the behavior correct.
- This may need to be refined eventually to improve performance.
- When trimming events, we could trim parents and fail to generate ghosts from them. Separate parent events out first.
- Try to simplify some logic.
Test Plan: An "Upcoming" dashboard panel with limit 10 and the main Calendar "Upcoming Events" UI now show the same results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8911
Differential Revision: https://secure.phabricator.com/D16289
Summary:
Ref T9275. Swaps Calendar over to modular transactions. Theoretically, this has almost no effect on anything.
Ref T10633. I didn't actually do anything here yet, but this gets us ready to put timestamps in email.
Test Plan: Created and edited a bunch of events, nothing seemed catastrophically broken.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9275, T10633
Differential Revision: https://secure.phabricator.com/D16286
Summary:
Ref T11309. In that task, a user misunderstood two parts of this error:
- They took "exception" to mean "unexpected failure", when it was intended to mean "rare circumstance".
- They intereted the internal ID number of a commit to mean that Phabricator was malfunctioning.
Make the language of this condition more direct, explaining what the situation means in greater detail.
Additionally, we would previously re-throw this exception, which would make the daemon exit, wait a moment, and restart. This was normal and expected.
When //unexpected// failures occur, it's important do to this: it prevents a daemon failing in a loop from causing too many side effects (e.g., limit of 1 email per 5 seconds instead of thousands per second).
When expected, permanent failures occur, we do not need to do this: the task will not be retried. I just did it because it was slightly more consistent ("failures restart daemons") and we had few permanent failure types at the time.
We have more now, and restarting the daemons generates some additional logs which have the potential to confuse. Cycling the daemon also (intentionally) reduces the rate at which we process tasks, which can be bad for permanent failures like "deleted commit" because users can delete a huge number of commits and possibly clog up the queue with cycle-after-failure actions.
Test Plan:
Tried to process a deleted commit, saw a new message:
```
2016-07-11 9:30:22 AM [STDE] <VERB> PhabricatorTaskmasterDaemon Task 1428658 was cancelled: Commit "R55:6c46b7d0fb82a859ca3f87a95dc8dcceef8088c9" (with internal ID "282161") is no longer reachable from any branch, tag, or ref in this repository, so it will not be imported. This usually means that the branch the commit was on was deleted or overwritten.
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11309
Differential Revision: https://secure.phabricator.com/D16268
Summary:
Ref T3554. Makes `bin/worker cancel --class <classname>` work (cancel all tasks with that type).
This is useful in development if your queue is full of a bunch of gunk, and a need has occasionally arisen in production environments (usually "one option is cancel everything and move on").
Test Plan: Ran `bin/worker cancel` to cancel blocks of tasks by class name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3554
Differential Revision: https://secure.phabricator.com/D16267
Summary:
Fixes T11274. When task titles are long, we currently wrap stuff and the trace graph renders real weird.
Instead, prevent taks/revision titles from wrapping/overflowing.
(This works in a slightly weird way, and `text-overflow: ellipsis;` has no apparent effect on any of the containers.)
Test Plan: {F1712394}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11274
Differential Revision: https://secure.phabricator.com/D16233
Summary:
Ref T5267. Two general changes:
- Make string extraction use a cache, so that it doesn't take several minutes every time you change something. Minor updates now only take a few seconds (like `arc liberate` and similar).
- Instead of dumping a sort-of-template file out, write out to a cache (`src/.cache/i18n_strings.json`). I'm planning to add more steps to read this cache and do interesting things with it (emit translatewiki strings, generate or update standalone translation files, etc).
Test Plan:
- Ran `bin/i18n extract`.
- Ran it again, saw it go a lot faster.
- Changed stuff, ran it, saw it only look at new stuff.
- Examined caches.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5267
Differential Revision: https://secure.phabricator.com/D16227
Summary: Fixes T11159. We get two different values here (`NULL` and `0`) with different meanings.
Test Plan:
- Ran `STOP SLAVE;`.
- Saw this:
{F1710181}
- Ran `START SLAVE;`.
- Back to normal.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11159
Differential Revision: https://secure.phabricator.com/D16225
Summary: Ref T4788. It's not easy to tell at a glance which objects are open vs closed. Try to make that a bit more clear. This could probably use some more tweaking.
Test Plan: {F1708330}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16219
Summary:
Ref T4788. As it turns out, our tasks are very tightly connected.
Instead of loading every parent/child task, then every parent/child of those tasks, etc., etc., only load tasks in the "same direction" that we're already heading.
For example, we load children of children, but not parents of children. And we load parents of parents, but not children of parents.
Basically we only go "up" and "down" now, but not "out" as much. This should reduce the gigantic multiple-thousand-node graphs currently shown in the UI.
I still discover the whole graph for revisiosn, because I think it's probably more useful and always much smaller. That might need adjustment too, though.
Test Plan: Seems fine locally??
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16218
Summary:
Ref T4788. This fixes all the bugs I was immediately able to catch:
- "Directory-Like" graph shapes could draw too many vertical lines.
- "Reverse-Directory-Like" graph shapes could draw too few vertical lines.
- Terminated, branched graph shapes drew the very last line to the wrong place.
This covers the behavior with tests, so we should be able to fix more stuff later without breaking anything.
Test Plan:
- Added failing tests and made them pass.
{F1708158}
{F1708159}
{F1708160}
{F1708161}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16216
Summary: Ref T4788. This seems reasonable locally, but not sure how it will feel on real data. Might need some tweaks, or might just be a terrible idea.
Test Plan: {F1708059}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16214
Summary:
Ref T4788. This separates the revision graph view into a base class with core logic and a revision class with Differential-specific logic, so I can subclass it in Maniphest, etc., and try using it in other applications to show similar graphs.
Not sure if we'll stick with it, but even if we don't this makes the code a bit cleaner and gets custom rendering logic out of the RevisionViewController, which is nice.
Test Plan: Viewed revisions, saw the stack UI completely unchanged.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16213
Summary: Ref T10628. Turn these into tabs in a single box, since "local commits" and "similar revisions" are of particularly rare use.
Test Plan: {F1707196}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10628
Differential Revision: https://secure.phabricator.com/D16209
Summary:
Ref T11232. The cluster connection pathway specifies a timeout when connecting, but this connection pathway does not. (I'm not sure if we just never did or if it got lost at some point.)
Soon, T11044 will obsolete this and unify the database connection pathways, but that's a more complicated change.
I'm not sure if this will fix T11232, but it can't hurt.
Test Plan: Put a `throw` on timeout specifications. Before the change: did not hit it in non-cluster configurations. After the change: hit it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11232
Differential Revision: https://secure.phabricator.com/D16194
Summary: Fixes T11201.
Test Plan:
Created bogus edges like this:
```
INSERT INTO edge (src, type, dst, dateCreated, seq) values ('PHID-TASK-vnddativbialb5p6ymis', 999999, 'quack', UNIX_TIMESTAMP(), 1);
```
Then ran `bin/remove destroy` on the relevant object.
Before the patch, destruction halted after hittin the bad edge.
After the patch, a warning is emitted but destruction continues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11201
Differential Revision: https://secure.phabricator.com/D16171
Summary:
Ref T11179. This splits "Edit Blocking Tasks" into two options now that we have more room ("Edit Parent Tasks", "Edit Subtasks").
This also renames "Blocking" tasks to "Subtasks", and "Blocked" tasks to "Parent" tasks. My goals here are:
- Make the relationship direction more clear: it's more clear which way is up with "parent" and "subtask" at a glance than with "blocking" and "blocked" or "dependent" and "dependency".
- Align language with "Create Subtask".
- To some small degree, use more flexible/general-purpose language, although I haven't seen any real confusion here.
Fixes T6815. I think I narrowed this down to two issues:
- Just throwing a bare exeception (we now return a dialog explicitly).
- Not killing open transactions when the cyclec check fails (we now kill them).
Test Plan:
- Edited parent tasks.
- Edited subtasks.
- Tried to introduce graph cycles, got a nice error dialog.
{F1697087}
{F1697088}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6815, T11179
Differential Revision: https://secure.phabricator.com/D16166
Summary: Ref T4280. At some point (probably D15732) we started getting anchor parsing wrong. Just pop the anchor off before doing all the logic, then put it back on at the end.
Test Plan:
Tested various forms like:
```
[[ x ]]
[[ x | z ]]
[[ x#y | z ]]
[[ ./x#y | z ]]
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4280
Differential Revision: https://secure.phabricator.com/D16083
Summary:
Ref T4103. Ref T10078. Currently, when a user misses a cache we just build it for them.
This is the behavior we want for the the viewer (so we don't have to build every cache up front if we don't actually need them), but not the right behavior for other users (since it allows performance problems to go undetected).
Make inline cache generation strict by default, then make sure all the things that rely on cache data request the correct data (well, all of the things identified by unit tests, at least: there might be some more stuff I haven't hit yet).
This fixes test failures in D16040, and backports a piece of that change.
Test Plan: Identified and then fixed failures with `arc unit --everything`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103, T10078
Differential Revision: https://secure.phabricator.com/D16042
Summary:
Ref T4103. These are currently stored on the user, for historic/performance reasons.
Since I want administrators to be able to set defaults for translations and timezones at a minimum and there's no longer a meaningful performance penalty for moving them off the user record, turn them into real preferences and then nuke the columns.
Test Plan:
- Set settings to unusual values.
- Ran migrations.
- Verified my unusual settings survived.
- Created a new user.
- Edited all settings with old and new UIs.
- Reconciled client/server timezone disagreement.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4103
Differential Revision: https://secure.phabricator.com/D16005
Summary:
Ref T6299. This makes more of the links point to the right places.
Not covered yet:
- Projects and subscribers don't point to the right place (this is a little tricky to fix, I think).
- `[[ #anchor ]]`s won't do the right thing in, uh, email, I guess, since `uri.here` is not set. This is also a little tricky.
Possibly we should just remove subscribers (although also kind of tricky).
Test Plan: On a custom-domain blog, observed that fewer things were broken.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6299
Differential Revision: https://secure.phabricator.com/D16007
Summary:
Fixes T11042. Currently, all `bin/storage` workflows stop if `cluster.read-only` is set:
```
$ ./bin/storage adjust
Usage Exception: Phabricator is currently in read-only mode. Use --force to override this mode.
```
However, some of them (`status`, `dump`, `databases`, etc) are read-only anyway and safe to run. Don't prompt in these cases.
Test Plan:
- Set `cluster.read-only` to `true`.
- Ran `bin/storage dump`, `bin/storage status`, etc. No longer received messages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11042
Differential Revision: https://secure.phabricator.com/D15987
Summary:
Ref T5267. Fixes T9643. Currently, we can not parse/extract a small fraction of strings:
- PHP files which contain obscure syntax that XHPAST can not parse.
- HEREDOCs do not have a useable `evalStatic()` behavior right now.
Emit these as warnings, but continue and generate all usable/extractable translations.
Test Plan:
```
epriestley@orbital ~/dev/phabricator $ ./bin/i18n extract . >/dev/null
Found 4,548 files...
Done.
WARNING: Failed to extract strings from file "/Users/epriestley/dev/core/lib/phabricator/externals/stripe-php/lib/Stripe/ApiRequestor.php": XHPAST Parse Error: syntax error, unexpected T_STRING on line 357
WARNING: Failed to evaluate pht() call on line 141 in "/Users/epriestley/dev/core/lib/phabricator/scripts/repository/commit_hook.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 24 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorClusterConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 23 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 49 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 83 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 91 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 97 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 103 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 113 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 119 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 128 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 137 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 149 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 159 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 166 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 179 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 192 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorMetaMTAConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 24 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/config/option/PhabricatorNotificationConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 26 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/harbormaster/step/HarbormasterCircleCIBuildStepImplementation.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 154 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/maniphest/config/PhabricatorManiphestConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 282 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/maniphest/config/PhabricatorManiphestConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 84 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/maniphest/editor/ManiphestEditEngine.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 345 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/metamta/storage/PhabricatorMetaMTAReceivedMail.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 59 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/owners/editor/PhabricatorOwnersPackageEditEngine.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 26 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/project/config/PhabricatorProjectConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 53 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/project/config/PhabricatorProjectConfigOptions.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 98 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 165 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 252 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 299 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 360 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 439 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 529 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/search/engine/PhabricatorSearchEngineAPIMethod.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 54 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/transactions/controller/PhabricatorEditEngineConfigurationLockController.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 56 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/transactions/view/PhabricatorApplicationEditHTTPParameterHelpView.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 126 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/transactions/view/PhabricatorApplicationEditHTTPParameterHelpView.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 185 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/transactions/view/PhabricatorApplicationEditHTTPParameterHelpView.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 238 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/transactions/view/PhabricatorApplicationEditHTTPParameterHelpView.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 288 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/transactions/view/PhabricatorApplicationEditHTTPParameterHelpView.php": Unexpected node during static evaluation, of type: n_HEREDOC
WARNING: Failed to evaluate pht() call on line 17 in "/Users/epriestley/dev/core/lib/phabricator/src/applications/uiexample/examples/PhabricatorRemarkupUIExample.php": Unexpected node during static evaluation, of type: n_HEREDOC
epriestley@orbital ~/dev/phabricator $
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5267, T9643
Differential Revision: https://secure.phabricator.com/D15983
Summary: Ref T5267. Put "Deutsch" in the list instead of "German", so you can find your language without knowing the English word for it.
Test Plan: {F1661598}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5267
Differential Revision: https://secure.phabricator.com/D15980
Summary:
Fixes T10381. When we converted to `PHUIRemarkupView`, some instructional text got linebreaks added when it shouldn't have them (the source is written in PHP and wrapped at 80 characters, but the output should flow naturally).
Fix this so we don't preserve linebreaks.
This also makes `PHUIRemarkupView` a little more powerful and inches us toward fixing Phame/CORGI remarkup issues, getting rid of `PhabricatorMarkupInterface` / `PhabricatorMarkupOneOff`, and dropping all the application hard-coding in `PhabricatorMarkupEngine`.
Test Plan:
- Grepped for all callsites, looking for callsites which accept remarkup written in `<<<HEREDOC` format.
- Viewed form instructions, Conduit API methods, HTTP parameter edit instructions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10381
Differential Revision: https://secure.phabricator.com/D15963
Summary: Fixes T10941. This avoids a confusing dead end when configuring Subversion hosting, where `svnserve` will fail to execute hooks if the CWD isn't readable by the vcs-user.
Test Plan:
- Updated and committed in a hosted SVN repository.
- Ran some git operations, too.
- @dpotter confirmed this locally in T10941.
Reviewers: chad
Reviewed By: chad
Subscribers: dpotter
Maniphest Tasks: T10941
Differential Revision: https://secure.phabricator.com/D15879
Summary: Ref T9790. This passes the map down so we can generate highlighted mail.
Test Plan:
Generated this relatively respectable-looking HTML mail:
{F1258558}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9790
Differential Revision: https://secure.phabricator.com/D15848
Summary:
Ref T9790. This prepares the syntax color rules to be reused in mail.
This goes about halfway toward T5701 by sort-of supporting different styles but not really.
Test Plan:
- Ran `bin/celerity syntax` to regenerate syntax map.
- Viewed some highlighted code, didn't see any differences.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9790
Differential Revision: https://secure.phabricator.com/D15846
Summary:
Ref T10748. Ref T10366. Allows users to set credential for new URIs.
- Ref T7221. Our handling of the "git://" protocol is currently incorrect. This protocol is not authenticated, but is considered an SSH protocol. In the new UI, it is considered an anonymous/unauthenticated protocol instead.
- Ref T10241. This fixes the `PassphraseCredentialControl` so it doesn't silently edit the value if the current value is not visible to you and/or not valid.
Test Plan:
Performed a whole lot of credential edits, removals, and adjustments. I'll give this additional vetting before cutting over to it.
{F1253207}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7221, T10241, T10366, T10748
Differential Revision: https://secure.phabricator.com/D15829
Summary:
Ref T10849. This enforces a global 30-second per-query time limit for anything not coming from the CLI.
If we run into another issue with MySQL hanging in the future, this should prevent it from being nearly as bad as it was.
Test Plan:
- Set value to 0, verified the UI threw an exception immediately.
- Set value back to 30, browsed around a bunch of pages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10849
Differential Revision: https://secure.phabricator.com/D15799
Summary:
Ref T10860. This allows us to recover if the connection to the database is lost during a push.
If we lose the connection to the master database during a push, we would previously freeze the repository. This is very safe, but not very operator-friendly since you have to go manually unfreeze it.
We don't need to be quite this aggressive about freezing things. The repository state is still consistent after we've "upgraded" the lock by setting `isWriting = 1`, so we're actually fine even if we lost the global lock.
Instead of just freezing the repository immediately, sit there in a loop waiting for the master to come back up for a few minutes. If it recovers, we can release the lock and everything will be OK again.
Basically, the changes are:
- If we can't release the lock at first, sit in a loop trying really hard to release it for a while.
- Add a unique lock identifier so we can be certain we're only releasing //our// lock no matter what else is going on.
- Do the version reads on the same connection holding the lock, so we can be sure we haven't lost the lock before we do that read.
Test Plan:
- Added a `sleep(10)` after accepting the write but before releasing the lock so I could run `mysqld stop` and force this issue to occur.
- Pushed like this:
```
$ echo D >> record && git commit -am D && git push
[master 707ecc3] D
1 file changed, 1 insertion(+)
# Push received by "local001.phacility.net", forwarding to cluster host.
# Waiting up to 120 second(s) for a cluster write lock...
# Acquired write lock immediately.
# Waiting up to 120 second(s) for a cluster read lock on "local001.phacility.net"...
# Acquired read lock immediately.
# Device "local001.phacility.net" is already a cluster leader and does not need to be synchronized.
# Ready to receive on cluster host "local001.phacility.net".
Counting objects: 3, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 254 bytes | 0 bytes/s, done.
Total 3 (delta 1), reused 0 (delta 0)
BEGIN SLEEP
```
- Here, I stopped `mysqld` from the CLI in another terminal window.
```
END SLEEP
# CRITICAL. Failed to release cluster write lock!
# The connection to the master database was lost while receiving the write.
# This process will spend 300 more second(s) attempting to recover, then give up.
```
- Here, I started `mysqld` again.
```
# RECOVERED. Link to master database was restored.
# Released cluster write lock.
To ssh://local@localvault.phacility.com/diffusion/26/locktopia.git
2cbf87c..707ecc3 master -> master
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10860
Differential Revision: https://secure.phabricator.com/D15792
Summary:
Trigger daemon is trying to find the next event to invoke before sleeping, but the query includes already-elapsed triggers.
It then tries to sleep for 0 seconds.
Test Plan:
On a new instance, schedule a single trigger of type `PhabricatorOneTimeTriggerClock` to a very near time.
Use top to see trigger daemon not going to 100% CPU once the event has elapsed.
Reviewers: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15750
Summary:
Fixes T10830.
- The return code from `storage adjust` did not propagate correct.
- There was one column issue which I missed the first time around because I had a bunch of unrelated stuff locally.
Test Plan:
- Ran `bin/storage upgrade -f` with failures, used `echo $?` to make sure it exited nonzero.
- Got fully clean `bin/storage adjust` by dropping all my extra local tables.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10830
Differential Revision: https://secure.phabricator.com/D15746
Summary:
Fixes T10830. Ref T10366. I wasn't writing to this table yet so I didn't build it, but the fact that `bin/storage adjust` would complain slipped my mind.
- Add the table.
- Make the tests run `adjust`. This is a little slow (a few extra seconds) but we could eventually move some steps like this to run server-side only.
Test Plan: Ran `bin/storage upgrade -f`, got a clean `adjust`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10366, T10830
Differential Revision: https://secure.phabricator.com/D15744
Summary:
Fixes T7475. If you do something like:
$ umask 123
$ ./bin/phd start
...the daemons might inherit the weird umask, do a `git fetch` with the weird umask, and end up creating files with weird permissions in repositories.
Instead, just normalize the umask to 022 in all cases. This is overwhelmingly the most common setting, and the one we assume things are configured with.
(When we want to force permissions to a certain setting, we do so explicitly.)
Test Plan:
- Added `var_dump(umask())` to observe umask.
- Ran `bin/phd`, saw proper umask (`18`, which is decimal of `022` octal).
- Set `umask 123`, then ran `bin/phd`, saw it correct properly again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7475
Differential Revision: https://secure.phabricator.com/D15721
Summary: These flags do slightly different things, I actually want --master-data here. My test databases are setup half-weird and work with either statement, which is why I missed this.
Test Plan: Ran a dump against master, got the right CHANGE MASTER statement with no warnings.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15716
Summary:
Ref T6915. This allows multiple notification servers to talk to each other:
- Every server has a list of every other server, including itself.
- Every server generates a unique fingerprint at startup, like "XjeHuPKPBKHUmXkB".
- Every time a server gets a message, it marks it with its personal fingerprint, then sends it to every other server.
- Servers do not retransmit messages that they've already seen (already marked with their fingerprint).
- Servers learn other servers' fingerprints after they send them a message, and stop sending them messages they've already seen.
This is pretty crude, and the first message to a cluster will transmit N^2 times, but N is going to be like 3 or 4 in even the most extreme cases for a very long time.
The fingerprinting stops cycles, and stops servers from sending themselves copies of messages.
We don't need to do anything more sophisticated than this because it's fine if some notifications get lost when a server dies. Clients will reconnect after a short period of time and life will continue.
Test Plan:
- Wrote two server configs.
- Started two servers.
- Told Phabricator about all four services.
- Loaded Chrome and Safari.
- Saw them connect to different servers.
- Sent messages in one, got notifications in the other (magic!).
- Saw the fingerprinting stuff work on the console, no infinite retransmission of messages, etc.
(This pretty much just worked when I ran it the first time so I probably missed something?)
{F1218835}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6915
Differential Revision: https://secure.phabricator.com/D15711
Summary:
Fixes T10758.
- Adds a "--host" flag. If you specify this, we read your cluster config. This lets you dump from a replica.
- Adds a "--for-replica" flag to `storage dump`. This makes `mysqldump` include a `CHANGE MASTER ...` statement in the output, which is useful when setting up a replica for the first time.
Test Plan:
- Dumped master and replica cluster databases.
- Dumped non-cluster databases.
- Ran various other commands (help, status, etc).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10758
Differential Revision: https://secure.phabricator.com/D15714
Summary:
Fixes T10697. This finishes bringing the rest of the config up to cluster power levels.
Phabricator is now given an arbitrarily long list of notification servers.
Each Aphlict server is given an arbitrarily long list of ports to run services on.
Users are free to make them meet in the middle by proxying whatever they want to whatever else they want.
This should also accommodate clustering fairly easily in the future.
Also rewrote the status UI and changed a million other things. 🐗
Test Plan:
{F1217864}
{F1217865}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10697
Differential Revision: https://secure.phabricator.com/D15703
Summary:
Ref T4571. Write more of the missing documentation sections and clarify a few things.
Since the "replicating master" check needs a special permission, imposes a performance penalty, is probably very difficult to misconfigure, and likely not a big deal anyway, just drop the idea of trying to automatically detect + prevent it. We still show if it's an issue on the status page, provided we have permission to check.
When you don't have any cluster databases configured, never stop trying to connect to the default master database. We might want to do this eventually as load reduction, but just don't muddy the waters too much for now while things stabilize.
Test Plan:
- Tested functionality in cluster, non-cluster, and degraded-cluster modes.
- Used status console to monitor a health check cycle.
- Read docs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15679
Summary:
Ref T4571. When a database goes down briefly, we fall back to replicas.
However, this fallback is slow (not good for users) and keeps sending a lot of traffic to the master (might be bad if the root cause is load-related).
Keep track of recent connections and fully degrade into "severed" mode if we see a sequence of failures over a reasonable period of time. In this mode, we send much less traffic to the master (faster for users; less load for the database).
We do send a little bit of traffic still, and if the master recovers we'll recover back into normal mode seeing several connections in a row succeed.
This is similar to what most load balancers do when pulling web servers in and out of pools.
For now, the specific numbers are:
- We do at most one health check every 3 seconds.
- If 5 checks in a row fail or succeed, we sever or un-sever the database (so it takes about 15 seconds to switch modes).
- If the database is currently marked unhealthy, we reduce timeouts and retries when connecting to it.
Test Plan:
- Configured a bad `master`.
- Browsed around for a bit, initially saw "unrechable master" errors.
- After about 15 seconds, saw "major interruption" errors instead.
- Fixed the config for `master`.
- Browsed around for a while longer.
- After about 15 seconds, things recovered.
- Used "Cluster Databases" console to keep an eye on health checks: it now shows how many recent health checks were good:
{F1213397}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15677
Summary:
Ref T4571. If we fail to connect to the master, automatically try to degrade into a temporary read-only mode ("UNREACHABLE") for the remainder of the request, if possible.
If the request was something like "load the homepage", that'll work fine. If it was something like "submit a comment", there's nothing we can do and we just have to fail.
Detecting this condition imposes a performance penalty: every request checks the connection and gives the database a long time to respond, since we don't want to drop writes unless we have to. So the degraded mode works, but it's really slow, and may perpetuate the problem if the root issue is load-related.
This lays the groundwork for improving this case by degrading futher into a "SEVERED" mode which will persist across requests. In the future, if several requests in a short period of time fail, we'll sever the database host and refuse to try to connect to it for a little while, connecting directly to replicas instead (basically, we're "health checking" the master, like a load balancer would health check a web application server). This will give us a better (much faster) degraded mode in a major service disruption, and reduce load on the master if the root cause is load-related, giving it a better chance of recovering on its own.
Test Plan:
- Disabled master in config by changing the host/username, got degraded automatically to UNREACAHBLE mode immediately.
- Faked full SEVERED mode, requests hit replicas and put me in the mode properly.
- Made stuff work, hit some good pages.
- Hit some non-cluster pages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15674
Summary: Ref T4571. If `cluster.databases` is configured but only has replicas, implicitly drop to read-only mode and send writes to a replica.
Test Plan:
- Disabled the `master`, saw Phabricator automatically degrade into read-only mode against replicas.
- (Also tested: explicit read-only mode, non-cluster mode, properly configured cluster mode).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15672
Summary:
Ref T4571. Allows users to click the "read-only mode" notification to get more information about why an install is in read-only mode.
Installs can be in this mode for several reasons (explicit administrative action, no masters defined, no masters reachable), and it's useful to be able to tell the difference.
Test Plan: {F1212930}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15671
Summary: Fixes T6710. After D15669, we support a proper timeout parameter, so we don't need this hack anymore.
Test Plan: See D15669: forced a MySQL connector, set a low timeout, set a bad database, saw fast failures.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6710
Differential Revision: https://secure.phabricator.com/D15670
Summary:
Ref T4571. Ref T10759. Ref T10758. This isn't complete, but gets most of the job done:
- When `cluster.databases` is set up, most things ignore `mysql.host` now.
- You can `bin/storage upgrade` and stuff works.
- You can browse around in the web UI and stuff works.
There's still a lot of weird tricky stuff to navigate, and this has real no advantages over configuring a single server yet (no automatic failover, etc).
Test Plan:
- Configured `cluster.databases` to point at my `t1.micro` hosts in EC2 (master + replica).
- Ran `bin/storage upgrade`, got a new install setup on them properly.
- Survived setup warnings, browsed around.
- Switched back to local config, ran `bin/storage upgrade`, browsed around, went through setup checks.
- Intentionally broke config (bad hosts, no masters) and things seemed to react reasonably well.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571, T10758, T10759
Differential Revision: https://secure.phabricator.com/D15668
Summary: Ref T4571. The configuration option still doesn't do anything, but add a status panel for basic setup monitoring.
Test Plan:
Here's what a good version looks like:
{F1212291}
Also faked most of the errors it can detect and got helpful diagnostic messages like this:
{F1212292}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15667
Summary:
Ref T4571. This adds a new option which allows you to upgrade your one-host configuration to a multi-host configuration by configuring it.
Doing this currently does nothing. I wrote a lot of words about what it is //supposed// to do in the future, though.
Test Plan:
- Tried to configure the option in all the possible bad ways, got errors.
- Read documentation.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15663
Summary:
Ref T4571. There will be a very long path beyond this, but add a basic read-only mode. You can explicitly enable this to put Phabricator in a sort of "maintenance" mode today if you're swapping databases or something.
In the long term, we'll automatically degrade into this mode if the master database is down.
Test Plan:
- Enabled read-only mode.
- Browsed around.
- Didn't immediately see anything that was totally 100% broken.
Most stuff is 80-90% broken right now. For example:
- Stuff like submitting comments doesn't work, and gives you a confusing, unhelpful error.
- None of the UI really knows that it's read-only. EditEngine stuff should all hide itself and say "you can't add new comments while an install is in read-only mode", for example, but currently does not.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4571
Differential Revision: https://secure.phabricator.com/D15662
Summary: Ref T7303. This application is currently stone-age tech (no transactions, hard "delete" action). Bring it up to modern specs.
Test Plan:
- Created and edited an OAuth application.
- Viewed transaction record.
- Tried to create something with no name, invalid redirect URI, etc. Was gently rebuffed with detailed explanatory errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7303
Differential Revision: https://secure.phabricator.com/D15609
Summary:
Ref T10538. Ref T10537. This creates PHIDs which represent GitHub users, and uses them as the actors for synchronized comments.
I've just made them Doorkeeper objects. There are three major kinds of objects they //could// possibly be:
- Nuance requestor objects.
- External account objects.
- Doorkeeper objects.
I don't think we actually need distinct nuance requestor objects. These don't really do anything right now, and were originally created before Doorkeeper. I think Doorkeeper is a superset of nuance requestor functionality, and better developed and more flexible.
Likewise, doorkeeper objects are much more flexible than external account objects, and it's nice to imagine that we can import from Twootfeed or whatever without needing to build full OAuth for it. I also like less stuff touching auth code, when possible.
Making these separate from external accounts does make it a bit harder to reconcile external users with internal users, but I think that's OK, and that it's generally desirable to show the real source of a piece of content. That is, if I wrote a comment on GitHub but also have a Phabricator account, I think it's good to show "epriestley (GitHub)" (the GitHub user) as the author, not "epriestley" (the Phabricator user). I think this is generally less confusing overall, and we can add more linkage later to make it clearer.
Test Plan:
{F1194104}
{F1194105}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537, T10538
Differential Revision: https://secure.phabricator.com/D15541
Summary:
Fixes T10234. This is a more thorough fix.
Root issue is that some time around D13589, we started hitting an object cache for `loadCustomInlineRules()`, but didn't adjust the code to account for that.
So if a page created multiple similar engines, we'd return the same `$rule` object for multiple engines, call `setEngine()` on it with different engines, and then possibly try to render using an already-expired engine the second time through.
Instead, create a separate `$rule` object for each separate `$engine`.
Test Plan:
Repro is something like this:
- Create a custominlinerule which uses an engine.
- Purge the remarkup cache.
- Load a page which uses the rule in two engines (e.g., in a revision description, and also in an inline comment).
- Before change: second one could fatal. After change: clean load.
Reviewers: thoughtpolice, chad
Reviewed By: thoughtpolice, chad
Subscribers: thoughtpolice, eadler
Maniphest Tasks: T10234
Differential Revision: https://secure.phabricator.com/D15535
Summary: Ref T10677, Awarding/revoking badge should create a feed story on homepage with badge handle recipient handles
Test Plan: Award/revoke badge, open Feed, should see story with badge link and recipient links.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10677
Differential Revision: https://secure.phabricator.com/D15534
Summary: Ref T10677, awarding/revoking a badge should create timeline entries with titles that are more clear (excludes homepage feed stories)
Test Plan: Award/revoke a badge to single or multiple users. See timeline entries that reflect those actions.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T10677
Differential Revision: https://secure.phabricator.com/D15533
Summary:
Ref T10537. For Nuance, I want to introduce new sources (like "GitHub" or "GitHub via Nuance" or something) but this needs to modularize eventually.
Split ContentSource apart so applications can add new content sources.
Test Plan:
This change has huge surface area, so I'll hold it until post-release. I think it's fairly safe (and if it does break anything, the breaks should be fatals, not anything subtle or difficult to fix), there's just no reason not to hold it for a few hours.
- Viewed new module page.
- Grepped for all removed functions/constants.
- Viewed some transactions.
- Hovered over timestamps to get content source details.
- Added a comment via Conduit.
- Added a comment via web.
- Ran `bin/storage upgrade --namespace XXXXX --no-quickstart -f` to re-run all historic migrations.
- Generated some objects with `bin/lipsum`.
- Ran a bulk job on some tasks.
- Ran unit tests.
{F1190182}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15521
Summary:
Ref T10537. These are objects which are bound to some external object, like a Maniphest task which is a representation of a GitHub issue.
This doesn't do much yet and may change, but my thinking is:
- I'm putting these on-object instead of on edges because I think we want to actively change the UI for them (e.g., clearly call out that the object is bridged) but don't want every page to need to do extra queries in the common case where zero bridged objects exist anywhere in the system.
- I'm making these one-to-one, more or less: an issue can't be bridged to a bunch of tasks, nor can a bunch of tasks be bridged to a single issue. Pretty sure this makes sense? I can't come up with any reasonable, realistic cases where you want a single GitHub issue to publish to multiple different tasks in Maniphest.
- Technically, one type of each bridgable object could be bridged, but I expect this to never actually occur. Hopefully.
Test Plan: Ran storage upgrade, loaded some pages.
Reviewers: chad
Reviewed By: chad
Subscribers: Luke081515.2
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15502
Summary: Fixes T10234. This usage is unusual, out of date, and has some bad interactions with engines and custom rules.
Test Plan:
- Added `CustomInlineCodeRule` from P1129 as an extension rule.
- Put a custom `<code> ... </code>` block in a Maniphest task description.
- Saw fatal as described in task; applied change; saw rule work properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10234
Differential Revision: https://secure.phabricator.com/D15501
Summary:
adds the `{{PHID....}}` rule. Should mostly be useful in UI code that refers to Objects.
It doesn't add any mention links/transactions.
Test Plan: Comment with this, see email (plain + html) and comment box.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15488
Summary:
First pass at converting Differential, I likely have some buggy-poos but thought I'd toss this up now in case very bad bugs present.
To do:
- Need to put status back on Hovercards
- "Diff Detail" probably needs a better design
Test Plan: Looking at lots of diffs, admittedly I dont have harbormaster, etc, running locally. Checked Diffusion for Table of Content changes on small and large commits.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15463
Summary: Ref T10537. Currently, when you have at least two cursors, the daemon can poll too frequently when processing the last source because it never hits the end-of-list condition.
Test Plan:
- Ran `bin/phd debug trigger`.
- Observed huge volumes of output before change as triggers fired as fast as possible.
- Observed reasonable poll frequency after change.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15464
Summary:
Ref T10563. This isn't a complete fix, but should make viewing complex inline threads a little more manageable.
This just tries to put stuff in thread order instead of in pure chronological order. We can likely improve the display treatment -- this is a pretty minimal approach, but should improve clarity.
Test Plan:
T10563 has a "before" shot. Here's the "after":
{F1169018}
This makes it a bit easier to follow the conversations.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10563
Differential Revision: https://secure.phabricator.com/D15459
Summary:
Fixes T10562. I left this behavior sort of ambiguous in the original implementation because I didn't anticipate or stumble across this situation.
It's easy to fix: when you reply to a ghost, just put the reply in the exact same place as the ghost (even if it's a different diff), so they always move/ghost/port/thread together.
Test Plan:
See T10562 for reproduction steps and a "before" picture. Here's the after picture:
{F1168983}
The two comments at the bottom are pre-fix, and exhibit the bug. The comment at the top is post-fix, and appears adjacent to the original correctly.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T10562
Differential Revision: https://secure.phabricator.com/D15458
Summary:
Ref T10537. More infrastructure:
- Put a `bin/nuance` in place with `bin/nuance import`. This has no useful behavior yet.
- Allow sources to be searched by substring. This supports `bin/nuance import --source whatever` so you don't have to dig up PHIDs.
Test Plan:
- Applied migrations.
- Ran `bin/nuance import --source ...` (no meaningful effect, but works fine).
- Searched for sources by substring in the UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15436
Summary:
Ref T10537. Some sources (like the future "GitHub Repository" source) need to poll remotes.
- Provide a mechanism for sources to emit import cursors.
- Hook them into the trigger daemon so they'll fire periodically.
- Provide some storage.
This diff does nothing useful or interesting, and is pure infrastructure.
Test Plan:
- Ran `bin/storage upgrade -f`, no adjustment issues.
- Poked around Nuance.
- Ran the trigger daemon, verified it didn't crash and checked for Nuance stuff to do.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10537
Differential Revision: https://secure.phabricator.com/D15435
Summary:
Two minor changes here:
- Replace `get/setUser()` with `get/setViewer()` for consistency with everything else.
- `getViewer()` now throws if no viewer is set. We had a lot of code that either "should" check this but didn't, or did check it in an identical way, duplicating work. In contrast, very little code checks for a viewer but works if one is not present.
Test Plan:
- Grepped for `->user`.
- Attempted to fix all callsites inside `*View` classes.
- Browsed around a bunch of applications, particularly Calendar, Differential and Diffusion, which seemed most heavily affected.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15412
Summary:
Every caller returns `true`. This was added a long time ago for Projects, but projects are no longer subscribable.
I don't anticipate needing this in the future.
Test Plan: Grepped for this method.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15409
Summary:
Ref T10457. Fixes T10024. This primarily just modernizes blueprints to use EditEngine.
This also fixes T10024, which was an issue with stored properties not being flagged correctly.
Also slightly improves typeaheads for blueprints (more information, disabled state).
Test Plan:
- Created and edited various types of blueprints.
- Set and removed limits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10024, T10457
Differential Revision: https://secure.phabricator.com/D15390
Summary: Ref T10394. Currently, these rules are only active if the Macro application is installed. Instead, install them unconditionally.
Test Plan:
- Used `{icon camera}` with Macro installed and uninstalled.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10394
Differential Revision: https://secure.phabricator.com/D15311
Summary: Moves all the one off object calls to PHUIRemarkupView, adds a "Document" call as well (future plans).
Test Plan: Visited most pages I could get access to, but may want extra careful eyes on this diff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15281
Summary: Clean the UI up a little.
Test Plan: {F1106533}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15259
Summary:
Fixes T10330.
- Anywhere we support "matches regexp", also allow "does not match regexp". Although you can sometimes write a clever negative regexp, these rules are better expressed with "does not match <simple regexp>" anyway, and sometimes no regexp will work.
- Always allow "does not contain" when we support "contains".
- Fix some JS issues with certain rules affecting custom fields.
Test Plan:
- Wrote an "Affected files do not match regexp" rule that required every diff to touch "MANUALCHANGELOG.md".
- Tried to diff without the file; rejected.
- Tried to diff with the file; accepted.
- Wrote a bunch of "contains" and "does not contain" rules against text fields and custom fields, then edited tasks to trigger/observe them.
- Swapped the editor into custom text, user, remarkup, etc fields, no more JS errors.
{F1105172}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10330
Differential Revision: https://secure.phabricator.com/D15254
Summary: I can't find any reference to these used. Fixes T10244
Test Plan: Grep for "phui-text" and "PHUI::TEXT"
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10244
Differential Revision: https://secure.phabricator.com/D15142
Summary: Mostly for consistency, we're not using other forms of icons and this makes all classes that use an icon call it in the same way.
Test Plan: tested uiexamples, lots of other random pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15125
Summary: Fixes T8762.
Test Plan: Ran `bin/storage upgrade --namespace ... --user limited`, saw a more specific error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8762
Differential Revision: https://secure.phabricator.com/D15080
Summary:
Ref T10195. Distinguish between "database does not exist" and "database exists, you just don't have permission to access it".
We can't easily get this information out of INFORMATION_SCHEMA but can just `SHOW TABLES IN ...` every database that looks like it's missing and then look at the error code.
Test Plan:
- Created a user `limited` with limited access.
- Ran `bin/storage adjust`.
- Got hopefully more helpful messages about access problems, instead of "Missing" errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10195
Differential Revision: https://secure.phabricator.com/D15079
Summary:
Ref T10188. If you issue certain queries which use reverse ordering (like "All tasks, oldest update to newest update") and then try to page forward, we build the paging clause without reversing the column order correctly.
For example, the ordering of "oldest update to newest update" is "dateModified ASC, id ASC", so the second page should include an "id > X" query. Currently, this builds as "id < X" incorrectly instead.
The cause of this is just a failure to re-reverse a reversing flag when constructing the paging clause.
Test Plan:
- Queried tasks by update, oldest to newest, with no grouping, etc.
- Paged to second page.
- After change, got a valid second page with a good query in the Services tab.
- Made some other normal queries.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10188
Differential Revision: https://secure.phabricator.com/D15076
Summary:
Ref T6183. Ref T10054. Historically, only members could watch projects because there were some weird special cases with policies. These policy issues have been resolved and Herald is generally powerful enough to do equivalent watches on most objects anyway.
Also puts a "Watch Project" button on the feed panel to make the behavior and meaning more obvious.
Test Plan:
- Watched a project I was not a member of.
- Clicked the feed watch/unwatch button.
{F1064909}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6183, T10054
Differential Revision: https://secure.phabricator.com/D15063
Summary:
Fixes T10135. When the viewer is a member of no projects, specify the constraint type as a new "EMPTY" type.
When a query has an "EMPTY" constraint, fail fast with no results.
Test Plan:
- Viewed a viewerprojects() query result set as a user in no projects.
- Before patch: got a lot of hits. After patch: no hits.
- Viewed a normal result set, no changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10135
Differential Revision: https://secure.phabricator.com/D15003
Summary: See Q266.
Test Plan: Created a bulk job, clicked "Details" instead of "Confirm", clicked "Continue" to get back to confirmation dialog.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14985
Summary:
Ref T10010. I think this is the desired/expected default behavior (e.g., searching for "Maniphest" should find tasks in any subproject or sprint of that project).
I'll probably add an "exact(...)" function later to mean "only the Maniphest superproject, exactly, not any of its children".
Test Plan:
- Added and executed unit tests.
- Ran various queries from the web UI.
- Got sensible-seeming results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14910
Summary: Ref T10010. This is pretty straightforward with a couple of very minor new behaviors, like the icon selector edit field.
Test Plan:
- Created projects.
- Edited projects.
- Saw "Create Project" in quick create menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D14896
Summary: Ref T8980. Previously, if you had like `T123T123T123` and waved your mouse over them, we wouldn't move the card. Now, move the card.
Test Plan: Waved mouse. Saw the card move.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8980
Differential Revision: https://secure.phabricator.com/D14881
Summary:
Ref T8980. Move away from events to EngineExtensions.
This also simplifies hovercards a bit:
- Removes tasks from revision cards.
- Removes blockers/blocked from task cards.
- Removes "Send Message" from user cards.
These mostly felt cluttery to me. Open to arguments to retain them. I think we can make better use of the space, though (e.g., flags, projects + board columns).
Test Plan:
- Viewed people, task, revision, commit and project hovercards.
{F1043256}
{F1043257}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8980
Differential Revision: https://secure.phabricator.com/D14878
Summary:
Ref T8980. This isn't 100% coverage but should be pretty much all of the common ones.
These feel a touch iffy to me at first glance so I didn't go crazy trying to hunt all of them down. I have some other plans for them so maybe they'll feel better by the end of it.
Test Plan: Hovered over author, reviewers, blocked tasks, projects, etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8980
Differential Revision: https://secure.phabricator.com/D14877
Summary:
After certain types of errors, we may deadlock when trying to destroy test databases.
Specifically, we still have connections open to, say, `phabricator_unittest_abasonaknlbaklnasb_herald` (or whatever) and MySQL sometimes (not sure exactly when?) waits for them before destorying the database.
Test Plan:
- Added `$m = null; $m->method()` to a fixture test to force a fatal.
- Saw consistent deadlock, with `storage destroy` never exiting.
- Added `--trace` to the `storage destroy` command and made it use `phutil_passthru()` so I could see what was happening.
- Saw it hang on some arbitrary database.
- Conneced to MySQL, used `show full processlist;` to see what was wrong.
- Saw the `DROP DATABASE ...` command waiting for locks to release on the database, and other connections still open.
- Applied patch.
- Saw consistent success.
- Used `storage destroy --unittest-fixtures` to clean up extra databases.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14875
Summary: Ref T8509. We currently give you a fairly obtuse error when trying to name a project something like "!!". The error is correct, but not as helpful as it could be. Give users a more specific, more helpful error.
Test Plan: {F1042883}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8509
Differential Revision: https://secure.phabricator.com/D14872
Summary:
Ref T8509. This fixes three issues:
- Adding a slug like `UPPERCASE` would not give you a normalized slug. (Now: normalizes as `uppercase`.)
- Adding a slug like `UPPERCASE` would allow you to give two different projects the different tags `UPPERCASE` and `uppercase` (and `UpPeRcAsE`, etc). (Now: second tag is rejected as a duplicate.)
- Adding multiple identical or similar slugs would produce a duplicate key exception. (Now: ignores the duplicates.)
Test Plan:
- Added test coverage.
- Made tests pass.
- Hit these cases in the UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8509
Differential Revision: https://secure.phabricator.com/D14870
Summary:
Ref T9979. This uses ngrams (specifically, trigrams) to build a reasonably efficient index for substring matching. Specifically, for a package like "Example", with ID 123, we store rows like this:
```
< ex, 123>
<exa, 123>
<xam, 123>
<amp, 123>
<mpl, 123>
<ple, 123>
<le , 123>
```
When the user searches for `exam`, we join this table for packages with tokens `exa` and `xam`. MySQL can do this a lot more efficiently than it can process a `LIKE "%exam%"` query against a huge table.
When the user searches for a one-letter or two-letter string, we only search the beginnings of words. This is probably what they want, the only thing we can do quickly, and a reasonable/expected behavior for typeaheads.
Test Plan:
- Ran storage upgrades and search indexer.
- Searched for stuff with "name contains".
- Used typehaead and got sensible results.
- Searched for `aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz` and saw only 16 joins.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9979
Differential Revision: https://secure.phabricator.com/D14846
Summary:
Ref T9979. This event had one weird callsite and no known third-party callers. It can be done more cleanly as an extension, now.
This index is used to allow us to "Group By: Project" in Maniphest without joining into the Projects database.
Test Plan:
- Ran a query with "Group By: Project" in Maniphest.
- Renamed project "Apples" to "Zebras".
- Reloaded page.
- UI properly moved "Zebras" tasks to the bottom of the list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9979
Differential Revision: https://secure.phabricator.com/D14836
Summary: Ref T9979. This is going to become `FulltextEngine`, but pave the way for that by pulling extensions out of it.
Test Plan:
{F1036624}
- Used `bin/search index Txxx`, saw projects, subscribers and custom fields rebuild in the index.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9979
Differential Revision: https://secure.phabricator.com/D14835
Summary: Ref T9979. Convert all DestructionEngine behaviors to extensions.
Test Plan:
{F1033244}
Destroyed an object, verifying:
- Herald transcripts were destroyed;
- edges were destroyed;
- flags were destroyed;
- tokens were destroyed;
- transactions were destroyed;
- worker tasks were cancelled.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9979
Differential Revision: https://secure.phabricator.com/D14832
Summary: Ref T10004. I missed these previously, so they didn't work quite right. Restore them to glory.
Test Plan: Edited remarkup and text custom fields on an Owners package.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14821
Summary:
Ref T9994. This fixes the first issue discussed on that task, which is that when a merge fails after "arc land", we would not clean up all the leases properly.
Specifically, when a merge fails, we use `queueTask()` to schedule a followup task. This followup destroys the lease and frees the underlying resource.
However, the default behavior of `queueTask()` is to //not queue tasks// if the parent task fails. This is a reasonable, safe behavior that was originally introduced in D8774, where it kept us from sending too much mail if a task did "send some mail" and then failed a little later on and got retried.
Since I think the default behavior is correct, I just special cased the behavior for Drydock to make it queue even on failure. These are the only types of followup tasks we currently want to queue on main task failure.
(It's possible that future Blueprints might want some kind of more specialized behavior, where some tasks queue only on success, but we can cross that bridge when we come to it.)
Test Plan:
- See T9994#149878 for test case setup.
- I ran that test case again with this patch, and saw the followup task queue properly in the `--trace` log, a correspoinding update task show up in `/daemon/`, and the lease get destroyed when I ran it a moment later.
{F1029915}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9994
Differential Revision: https://secure.phabricator.com/D14818
Summary:
Ref T10004. Fixes T5158. There was a long-standing issue with defaults not working properly, but EditEngine has made it more obvious because it's a lot easier to set defaults now.
The issue is basically that the defaults are getting set as the field's real value early on, so when we go to generate the transaction "old value" later, we build a transaction that uses the //new// value as both the "new value" and "old value". Then the engine says "you didn't change anything, so I'm going to ignore this" and drops it.
To fix this, return `null` as the "old value" by default, and add a call to overwrite that after we load a legitimate old value.
This fix is a touch iffy, but I have some grand plans to clean up the CustomField stuff more broadly later on.
Test Plan:
- Set config defaults on select/typeahead fields, created and edited tasks.
- Set form defaults on select/typehaead fields, created and edited tasks.
- In all cases, transactions and state accurately reflected edits.
- Set defaults on //hidden// fields, verified forms respected them correctly.
- This does generate some fluffy transactions, but I'll deal with those in T7661.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5158, T10004
Differential Revision: https://secure.phabricator.com/D14809
Summary:
Fixes T6864. This creates a sort of busy menu but I think that's proably fine -- users are opting into activating these fields for search anyway.
In the future, we could refine this as, e.g.:
- don't show these options in the dropdown;
- do show them on some new "http prefilling" sort of page;
- then you access them as an advanced user with `?order=secret-magic`.
But I'm not going to bother for now.
Test Plan: Ordered by an int field, then reversed the order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6864
Differential Revision: https://secure.phabricator.com/D14800
Summary:
Ref T9964. Three goals here:
- Make it easier to supply Conduit documentation.
- Make automatic documentation for `*.edit` endpoints more complete, particularly for custom fields.
- Allow type resolution via Conduit types, so you can pass `["alincoln"]` to "subscribers" instead of needing to use PHIDs.
Test Plan:
- Viewed and used all search and edit endpoints, including custom fields.
- Used parameter type resolution to set subscribers to user "dog" instead of "PHID-USER-whatever".
- Viewed HTTP parameter documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14796
Summary: Ref T9964. This just adds more structure to application fields, to make it harder to make typos and easier to validate them later.
Test Plan: Viewed APIs, called some APIs, saw good documentation and correct results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14776
Summary:
Ref T9964. Fill in more parameter types and descriptions.
(No date support yet since it's a bit more involved.)
Test Plan: {F1024022}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14766
Summary:
Ref T9964. ApplicationSearch currently has a bunch of hard-coded `if ($object instanceof thing)` stuff.
Pull that out so it can live in extensions.
Test Plan:
- Searched by spaces, subscribers, projects.
{F1023921}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14764
Summary:
Ref T9964. Adds a new-style "owners.search" endpoint, and an extension for customfields.
Puts enough indirection in place to give us nice, consistent "custom.key" user-facing keys instead of "std:custom:owners:na0shf9a8dfdsafl" junk.
Test Plan:
- Searched Owners via API.
- Searched by ID.
- Ordered by custom fields.
- Reviewed API docs.
- Used normal search with ordering.
- Viewed custom field values in search results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14758
Summary:
Fixes T9945. This is straightforward.
The two sub-object types are very lightweight so I just deleted them directly instead of loading + delete()'ing (or implementing DestructibleInterface on them, which would require they have PHIDs).
Also improve a US English localization.
Test Plan:
- Used `bin/remove destroy PHID-... --trace` to destroy a package.
- Verified it was gone.
- Inspected the SQL in the log for general reasonableness.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9945
Differential Revision: https://secure.phabricator.com/D14729
Summary: Fixes T9919. We were missing feed strings and US English localizations for some of this stuff.
Test Plan:
Before:
{F1018877}
After:
{F1018879}
{F1018880}
{F1018881}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9919
Differential Revision: https://secure.phabricator.com/D14721
Summary: Fixes T9851. I'll hold this for a while to give users some time to update per T9860.
Test Plan:
Edited a task via:
- Conduit
- Comments field
- Edit form
- New task form
Reviewers: chad
Reviewed By: chad
Subscribers: Krenair
Maniphest Tasks: T9851
Differential Revision: https://secure.phabricator.com/D14576
Summary:
Fixes T9920. When hiding changes, tell users why so they can learn the comment rule (usually, "Changes from before your most recent comment are hidden."; sometimes they're hidden for pagination reasons).
Also use "Show Older Comments" instead of "Show older comments." for the action since I think it's a little more consistent to use title case for links/actions?
Test Plan:
- Viewed a task with a lot of comments, saw a "most recent comment" element.
- Artificially set page size to 3, saw a "lots of changes" hide.
- Grepped for removed string.
- Clicked both "show older stuff" links.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9920
Differential Revision: https://secure.phabricator.com/D14719
Summary:
Ref T9132. Ref T9908. Fixes T5622. This allows you to copy some fields (projects, subscribers, custom fields, some per-application) from another object when creating a new object by passing the `?template=xyz` parameter.
Extend "copy" support to work with all custom fields.
Test Plan:
- Created new pastes, packages, tasks using `?template=...`
- Viewed new template docs page.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5622, T9132, T9908
Differential Revision: https://secure.phabricator.com/D14699
Summary:
Ref T9132. When I've touched `PhabricatorApplication` I keep hitting this bad `pht()` junk.
The warning is correct, these strings are not extactable and can not be translated.
Fix it so they can be extracted and translated.
Broadly, in all cases we want to render one of these:
> 95 Things (for fewer than some limit)
> 99+ Things (when we hit the limit)
Test Plan: Looked at homepage status counts, moused over them, saw reasonable strings. Grepped for removed method.
Reviewers: chad
Reviewed By: chad
Subscribers: joshuaspence
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14638
Summary:
Ref T9132. Give most standard custom fields reasonable Conduit support so you can use the new `application.x` endpoints to set them.
Major missing field type is dates, again.
Test Plan: Used Conduit to set various custom fields on a package.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14635
Summary:
Ref T9132. This allows you to prefill custom fields with `?custom.x.y=value`, for most types of custom fields.
Dates (which are substantially more complicated) aren't supported. I'll just do those once the dust settles. Other types should work, I think.
Test Plan:
- Verified custom fields appear on "HTTP Parameters" help UI.
- Used `?x=y` to prefill custom fields on edit form.
- Performed various normal edits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14634
Summary:
Ref T9132. This isn't perfect, but doesn't break any existing functionality. This stuff works:
- Editing values.
- Reordering fields.
- All builtin field tyepes.
This stuff may not work yet:
- Assigning custom field defaults.
- Some conduit stuff.
- Fully custom fields?
- Locking/hiding fields? Didn't actually test this one.
I'll keep chipping away at that stuff. In some cases, it may be easier to convert all the CustomField apps first, although Differential might be a fair bit of work.
Test Plan:
Created a bunch of custom fields of every avialable type and edited them.
{F1008789}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14617
Summary: Fixes T9715. Adds a MySQL-based lock to ensure that schema migrations are not applied on multiple hosts simultaneously.
Test Plan: Ran `./bin/storage upgrade` concurrently. One invocation was successful whilst the other hit a `PhutilLockException`.
Reviewers: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9715
Differential Revision: https://secure.phabricator.com/D14463
Summary: This logic is flipped.
Test Plan:
- Before change: ran `bin/phd debug task`, saw queries to the config table every second.
- After change: ran `bin/phd debug task`, saw queries to the config table every 10 seconds.
Reviewers: chad, joshuaspence
Reviewed By: chad, joshuaspence
Differential Revision: https://secure.phabricator.com/D14542
Test Plan:
I didn't put any skill points in spelling since I need
combat skills to survive in a nuclear wasteland, but spell check says
this is better.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D14522
Summary:
Fixes T9808.
An instance imported a very large repository, generating approximately 4 million tasks over the course of a few days. A week later, these tasks started expiring and became candidates for garbage collection.
The GC works by deleting 100 rows at at time over and over again. It finds the rows it's going to delete by querying for old rows.
Currently, this query generates a `WHERE dateCreated < X ORDER BY id DESC` query. This query can not efficiently execute using a single key, because it relies on `dateCreated` order to find the rows, then on `id` order to sort them. With a table with 4M rows, this is slow.
This would still be OK, except that the query has to execute a lot of times since it only deletes 100 rows each time. Particularly, it needs to execute a total of ~40K times.
Instead, generate `WHERE dateCreated < X ORDER BY dateCreated DESC, id DESC`. This should have the same effect in general and the GC definitely doesn't care about the difference, but it should be more efficient at large scales.
Test Plan:
I had to `TRUNCATE` the problem table so I don't have a perfect repro to completely convincingly test this anymore. Both queries behave fine at small scales, which is why we haven't seen this before.
I was able to run the newer query in production before I nuked the table and have it complete in a reasonable amount of time, while the old query hung longer than I wanted to wait (several minutes?). The query plan for the new query was also a good one, while the query plan for the old query was terrible.
I loaded the daemon console and ran `bin/garbage collect --collector worker.tasks --trace`. I verified the queries looked reasonable and produced reasonable results in production.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9808
Differential Revision: https://secure.phabricator.com/D14505
Summary: Some linter messages, such as those produced by `ArcanistPHPCompatibilityXHPASTLinterRule`, contain backticks but are currently rendered as Remarkup literals. I think that it is generally desirable to allow lint messages to be rendered as Remarkup, although we should ideally have a way to render Remarkup for use on the command line (I actually think that this already exists, but I don't think that `arc lint` does this when rendering linter messages).
Test Plan: Resubmitted D14481 to my dev install and saw Remarkuped lint messages.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14485
Summary: Rename the XHPAST database from `{$NAMESPACE}_xpastview` to `{$NAMESPACE}_xhpast`.
Test Plan: Ran `./bin/storage --namespace test upgrade --no-quickstart`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14442
Summary: Ref T7053. Remove the `envHash` and `envInfo` fields, which are no longer used now that the daemons restart automagically. Depends on D14458.
Test Plan: Saw no more setup issues.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: tycho.tatitscheff, epriestley
Maniphest Tasks: T7053
Differential Revision: https://secure.phabricator.com/D14446
Summary: Fixes T7053. Depends on D14452.
Test Plan:
Created a custom daemon which dumps out the config hash (by querying `PhabricatorEnv::calculateEnvironmentHash()`). Ran this daemon with `./bin/phd debug PhabricatorDebugDaemon` and saw the config hash update within 30 seconds.
{P1886}
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T7053
Differential Revision: https://secure.phabricator.com/D14458
Summary: Adds some basic style to new !!Remarkup Highlighter!! Ref T5560
Test Plan: Wait for next diff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5560
Differential Revision: https://secure.phabricator.com/D14383
Summary:
Fixes T9519. Right now, build steps go straight from the build to the edit screen.
This means that there's no way to see their edit history or review details without edit permission. In particular, this makes it a bit harder to catch the Drydock Blueprint authorization warnings from T9519.
- Add a standard view screen.
- Add a little warning callout to blueprint authorizations.
This also does a bit of a touchup on the weird dropshadow element from T9586. Maybe not totally design-approved now but it's less ugly, at least.
Test Plan:
{F906695}
{F906696}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14330
Summary:
It's hard for us to predict how long patches and migrations will take in the general case since it varies a lot from install to install, but we can give installs some kind of rough heads up about longer patches. I'm planning to just put a sort of hint for things in the changelog, something like this:
{F905579}
To make this easier, start storing how long stuff took. I'll write a little script to dump this into a table for the changelog.
Test Plan:
Ran `bin/storage status`:
{F905580}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14320
Summary:
Fixes T9273. Remarkup has reasonably good fundamentals but the API is a giant pain to work with.
Provide a `PHUIRemarkupView` to make it easier. This object is way simpler to use by default.
It's not currently as powerful, but we can expand the power level later by adding more setters.
Eventually I'd expect to replace `PhabricatorRemarkupInterface` and `PhabricatorMarkupOneOff` with this, but no rush on those.
I converted a few callsites as a sanity check that it works OK.
Test Plan:
- Viewed remarkup in Passphrase.
- Viewed remarkup in Badges.
- Viewed a Conduit method.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9273
Differential Revision: https://secure.phabricator.com/D14289
Summary: Fixes T9573. This incorrectly affected Phriction. I could restore it for only projects, but you didn't like the rule very much anyway and I don't feel strongly about it.
Test Plan: Unit tests.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9573
Differential Revision: https://secure.phabricator.com/D14287
Summary:
Ref T182. This allows you to assign blueprints that a repository can use to perform working copy operations. Eventually, this will support "merge this" in Differential, etc.
This is just UI for now, with no material effects.
Most of this diff is just taking logic that was in the existing "Blueprints" CustomField and putting it in more general places so Diffusion (which does not use CustomFields) can also access it.
Test Plan:
- Configured repository automation for a repository.
- Removed repository automation for a repository.
Reviewers: chad
Reviewed By: chad
Subscribers: avivey
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14259
Summary:
Ref T9551. We currently use the same logic for generating project hashtags and Phriction slugs, but should be a little more conservative with project hashtags.
Stop them from generating with stuff that won't parse in a "Reviewers:" field or generally in commments (commas, colons, etc).
Test Plan:
Created a bunch of projects with nonsense in them and saw them generate pretty reasonable hashtags.
{F873456}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9551
Differential Revision: https://secure.phabricator.com/D14261
Summary:
Ref T9551. To set things up:
- Name a project `aa bb`. This will have the tag `aa_bb`.
- Try to visit `/tag/aa%20bb`.
Here's what happens now:
- You get an Aphront redirect error as it tries to add the trailing `/`. Add `phutil_escape_uri()` so that works again.
- Then, you 404, even though this tag is reasonably equivalent to the real project tag and could be redirected. Add a fallback to lookup, resolve, and redirect if we can find a hit for the tag.
This also fixes stuff like `/tag/AA_BB/`.
Test Plan: Visited URIs like `/tag/aa%20bb`, `/tag/aa%20bb/`, `/tag/Aa_bB/`, etc. None of them worked before and now they all do.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9551
Differential Revision: https://secure.phabricator.com/D14260
Summary:
Ref T9519. This is like 80% of the way there and doesn't fully work yet, but roughly shows the shape of things to come. Here's how it works:
First, there's a new custom field type for blueprints which works like a normal typeahead but has some extra logic. It's implemented this way to make it easy to add to Blueprints in Drydock and Build Plans in Harbormaster. Here, I've added a "Use Blueprints" field to the "WorkingCopy" blueprint, so you can control which hosts the working copies are permitted to allocate on:
{F869865}
This control has a bit of custom rendering logic. Instead of rendering a normal list of PHIDs, it renders an annotated list with icons:
{F869866}
These icons show whether the blueprint on the other size of the authorization has approved this object. Once you have a green checkmark, you're good to go.
On the blueprint side, things look like this:
{F869867}
This table shows all the objects which have asked for access to this blueprint. In this case it's showing that one object is approved to use the blueprint since I already approved it, but by default new requests come in here as "Authorization Requested" and someone has to go approve them.
You approve them from within the authorization detail screen:
{F869868}
You can use the "Approve" or "Decline" buttons to allow or prevent use of the blueprint.
This doesn't actually do anything yet -- objects don't need to be authorized in order to use blueprints quite yet. That will come in the next diff, I just wanted to get the UI in reasonable shape first.
The authorization also has a second piece of state, which is whether the request from the object is active or inactive. We use this to keep track of the authorization if the blueprint is (maybe temporarily) deleted.
For example, you might have a Build Plan that uses Blueprints A and B. For a couple days, you only want to use A, so you remove B from the "Use Blueprints: ..." field. Later, you can add B back and it will connect to its old authorization again, so you don't need to go re-approve things (and if you're declined, you stay declined instead of being able to request authorization over and over again). This should make working with authorizations a little easier and less labor intensive.
Stuff not in this diff:
- Actually preventing any allocations (next diff).
- Probably should have transactions for approve/decline, at least, at some point, so there's a log of who did approvals and when.
- Maybe should have a more clear/loud error state when no blueprints are approved?
- Should probably restrict the typeahead to specific blueprint types.
Test Plan:
- Added the field.
- Typed some stuff into it.
- Saw the UI update properly.
- Approved an authorization.
- Declined an authorization.
- Saw active authorizations on a blueprint page.
- Didn't see any inactive authroizations there.
- Clicked "View All Authorizations", saw all authorizations.
Reviewers: chad, hach-que
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14251
Summary: Fixes T9538. Ref T9408. `cowsay` and `figlet` Remarkup rules are being mangled in HTML mail right now. Put them in <pre> to unmangle them.
Test Plan:
Sent myself a cow + figlet in mail.
Used `bin/mail show-outbound --id ... --dump-html > dump.html` + open that HTML file in Safari to preview HTML mail.
Saw linebreaks and monospaced formatting.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9538, T9408
Differential Revision: https://secure.phabricator.com/D14248
Summary: Ref T9514. I missed these when I swapped out the console stuff recently.
Test Plan: Ran `bin/storage probe`, saw bold instead of escape sequences.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9514
Differential Revision: https://secure.phabricator.com/D14240
Summary:
Ref T9252. Currently, `queueTask()` accepts `$priority` as its third argument. Allow it to take a full range of `$options` instead. This API just never got updated after we expanded avialable options.
Arguably this whole API should be some kind of "TaskQueueRequest" object but I'll leave that for another day.
Test Plan:
- Grepped for `queueTask()` and verified no other callsites are affected by this API change.
- Ran some daemons.
- See also next diff.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14235
Summary:
Ref T9252. Currently, Harbormaster and Drydock work like this in some cases:
# Queue a lease for activation.
# Then, a little later, save the lease PHID somewhere.
# When the target/resource is destroyed, destroy the lease.
However, something can happen between (1) and (2). In Drydock this window is very short and the "something" would have to be a lighting strike or something similar, but in Harbormaster we wait until the resource activates to do (2) so the window can be many minutes long. In particular, a user can use "Abort Build" during those many minutes.
If they do, the target is destroyed but it doesn't yet have a record of the artifact, so the artifact isn't cleaned up.
Make these things work like this instead:
# Create a new lease and pre-generate a PHID for it.
# Save that PHID as something that needs to be cleaned up.
# Queue the lease for activation.
# When the target/resource is destroyed, destroy the lease if it exists.
This makes sure there's no step in the process where we might lose track of a lease/resource.
Also, clean up and standardize some other stuff I hit.
Test Plan:
- Stopped daemons.
- Restarted a build in Harbormaster.
- Stepped through the build one stage at a time using `bin/worker execute ...`.
- After the lease was queued, but before it activated, aborted the build.
- Processed the Harbormaster side of things only.
- Saw the lease get destroyed properly.
Reviewers: chad, hach-que
Reviewed By: hach-que
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14234
Summary:
Fixes T9494. This:
- Removes all the random GC.x.y.z config.
- Puts it all in one place that's locked and which you use `bin/garbage set-policy ...` to adjust.
- Makes every TTL-based GC configurable.
- Simplifies the code in the actual GCs.
Test Plan:
- Ran `bin/garbage collect` to collect some garbage, until it stopped collecting.
- Ran `bin/garbage set-policy ...` to shorten policy. Saw change in web UI. Ran `bin/garbage collect` again and saw it collect more garbage.
- Set policy to indefinite and saw it not collect garabge.
- Set policy to default and saw it reflected in web UI / `collect`.
- Ran `bin/phd debug trigger` and saw all GCs fire with reasonable looking queries.
- Read new docs.
{F857928}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9494
Differential Revision: https://secure.phabricator.com/D14219
Summary: Ref T9494. Depends on D14216. Remove 10 copies of this code.
Test Plan: Ran `arc unit --everything`, browsed Config > Modules, clicked around Herald / etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9494
Differential Revision: https://secure.phabricator.com/D14217
Summary:
Ref T9252. This primarily allows Harbormaster to request (and Drydock to fulfill) working copies with a patch from a staging area. Doing this means we can do builds on in-review changes from `arc diff`.
This is a little cobbled-together but should basically work.
Also fix some other issues:
- Yielded, awakend workers are fine to update but could complain.
- We can't log slot lock failures to resources if we don't end up saving them.
- Killing the transaction would wipe out the log.
- Fix some TODOs, etc.
Test Plan: Ran Harbormaster builds on a local revision.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14214
Summary:
Ref T9252. This is the same as D14201, but for lease stuff instead of resource stuff.
This one is a little heavier but still feels pretty reasonable to me at the end of the day (worker is <1K lines and has a ton of comment stuff).
Also fixes a few random bugs I hit in the task queue.
Test Plan:
- Restarted some Harbormaster builds, saw them go through cleanly.
- Released pre-activation resources/leases.
- Probably still kinda buggy but I'll iron the details out over time.
Logs are starting to look somewhat plausible:
{F855747}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14202
Summary:
Fixes T9479. Currently, `@aaaaaaaa` may try to match as a commit hash, and `@C123456` may try to match as a Countdown reference. These should only match as user mentions.
Prevent object mention rules from matching after `@`. We already prevent them after `-` and `#`, and already prevented the username rule after `@` (i.e., preventing `@@user`).
Test Plan:
Created some "interesting" users locally and `@mentioned` them:
{F850779}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9479
Differential Revision: https://secure.phabricator.com/D14186
Summary:
Ref T9123. The handling in D14183 didn't deal with new field values properly.
Make all this handling more consistent.
Test Plan: Created a new WorkignCopy build plan with some repos.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9123
Differential Revision: https://secure.phabricator.com/D14184
Summary:
Ref T9123. To run upstream builds in Harbormaster/Drydock, we need to be able to check out `libphutil`, `arcanist` and `phabricator` next to one another.
This adds an "Also Clone: ..." field to Harbormaster working copy build steps so I can type all three repos into it and get a proper clone with everything we need.
This is somewhat upstream-centric and a bit narrow, but I don't think it's totally unreasonable, and most of the underlying stuff is relatively general.
This adds some more typechecking and improves data/type handling for custom fields, too. In particular, it prevents users from entering an invalid/restricted value in a field (for example, you can't "Also Clone" a repository you don't have permission to see).
Test Plan: Restarted build, got a Drydock resource with multiple repositories in it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9123
Differential Revision: https://secure.phabricator.com/D14183
Summary:
Ref T9252. Currently, Harbormaster does this when trying to acquire a working copy:
- Ask for a working copy.
- Yield for 15 seconds.
- Check if we have a working copy yet.
That's OK, but Drydock takes ~1s to acquire a working copy lease if a resource is already available, so we end up doing this:
- T+0: Ask for a working copy.
- T+0: Yield for 15 seconds.
- T+1: Working copy lease activates.
- T+15: Working copy lease is used.
- T+16: Build finishes.
So we end up spending about 2 seconds doing work and 14 seconds sleeping.
One way to fix this would be to fiddle with the yield duration, so we yield for 1, 2, 4, ... seconds or something. This probably isn't a bad idea for longer leases (i.e., wait for 15, 30, 45 ... seconds or similar) but it implies a lot of churn for short leases.
Instead, let tasks "awaken" other tasks when they complete. The "awaken" operation means: if a task is in a yielded state (no failures, no owner, explicitly yielded, future expires time), pretend it only yielded until right now instead of whenever it really yielded to.
Basically, this rewrites history so that even though Harbormaster did a `yield(15)`, we pretend it did a `yield(4)` after we activate the lease if lease activation took 4 seconds.
If this misses, it's fine: we fall back to the normal yield behavior and things move forward normally a few seconds later.
If it hits, we get a more nimble process pretty cleanly.
Test Plan:
- Restarted a build plan (lease working copy + run `ls`) with this patch no-op'd, took about 16 seconds.
- Restarted a build plan with this patch active, took about 1 second.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14178
Summary:
Fixes T6569. This implements an expiry mechanism for Drydock resources which parallels the mechanism for leases.
A few things are missing that we'll probably need in the future:
- An "EXPIRES" command to update the expiration time. This would let resources be permanent while leased, then expire after, say, 24 hours without any leases.
- A callback like `shouldActuallyExpireRightNow()` for resources and leases that lets them decide not to expire at the last second.
- A callback like `didAcquireLease()` for resource blueprints, to parallel `didReleaseLease()`, letting them clear or extend their timer.
However, this stuff would mostly just let us tune behaviors, not really open up new capabilities.
Test Plan: Changed host resources to expire after 60 seconds, leased one, saw it vanish 60 seconds later.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T6569
Differential Revision: https://secure.phabricator.com/D14176
Summary: Fixes T9260. That task has a good description of the issue.
Test Plan: Followed steps in T9260 to reproduce the issue. Applied patch; issue went away.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9260
Differential Revision: https://secure.phabricator.com/D14169
Summary: Ref T6569. If a lease is activated with an expiration date, schedule a task to try to clean it up after that time.
Test Plan:
- Used `bin/drydock lease ... --until ...` to activate a lease in the near future.
- Waited for a bit.
- Saw it expire and get destroyed at the scheduled time.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T6569
Differential Revision: https://secure.phabricator.com/D14148
Summary:
Ref T9252. This simplifies some Drydock code.
Most of this code relates to the old notion of Drydock being able to enumerate all the tasks it needs to complete in order to acquire a lease. The code has stepped back from this, since it's unnecessary, the queue is more powerful than it used to be, and it would be a lot of work to keep track of.
The ~only thing that should ever wait for leases in modern code is `bin/drydock lease`, and it's fine for it to just sit there sleeping, so this just does that.
This reduces the granularity of logging, but I'll address that separately in future logging-focused changes.
Test Plan: Used `bin/drydock lease` to acquire a lease, saw it acquire cleanly.
Reviewers: hach-que, chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14147
Summary:
Ref T9253. For resources and leases that need to do something which takes a lot of time or requires waiting, allow them to allocate/acquire first and then activate later.
When we allocate a resource or acquire a lease, the blueprint can either activate it immediately (if all the work can happen quickly/inline) or activate it later. If the blueprint activates it later, we queue a worker to handle activating it.
Rebuild the "working copy" blueprint to work with this model: it allocates/acquires and activates in a separate step, once it is able to acquire a host.
Test Plan: With some power of imagination, brought up a bunch of working copies with `bin/drydock lease --type working-copy ...`
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14127
Summary:
Ref T9253. See discussion in D13843.
I want to let Drydock blueprints for Almanac services choose those services from a typeahead, but only list appropriate services in the typeahead. To do this:
- Provide a StandardCustomField for an arbitrary datasource.
- Adjust the AlmanacServiceDatasource to allow filtering by service class.
This implementation is substantially the same as the one in D13843, with some adjustments:
- I lifted most of the code in the `Users` standard custom field into a new `Tokenizer` standard custom field.
- The `Users` and `Datasource` custom fields now extend the `Tokenizer` custom field and can share most of the code it uses.
- I exposed this field fully as a configurable field. I don't think anyone will ever use it, but this generality costs us nearly nothing and improves consistency.
- The code in D13843 didn't actually pass the parameters over the wire, since the object that responds to the request is not the same object that renders the field. Use the "parameters" mechanism in datasources to get things passed over the wire.
Test Plan:
- Created a custom "users" field in Maniphest and made sure it still wokred.
- Created a custom "almanc services" field in Maniphest and selected some services for a task.
- With additional changes from D13843, selected an appropriate Almanac service in a new Drydock blueprint.
Reviewers: hach-que, chad
Reviewed By: hach-que, chad
Maniphest Tasks: T9253
Differential Revision: https://secure.phabricator.com/D14111
Summary:
Ref T7785. Makes Figlet available without installing the `figlet` package.
The PEAR Text_Figlet code is really sketchy and includes this API, which is quite marvelous:
```
function loadFont($filename, $loadgerman = true)
```
At some point, this should probably be rewritten into a modern style, but it's not trivial since the figlet file format and rendering engine are somewhat complicated. I made some adjustments:
- Broke the dependency on the PEAR core.
- Prevented it from doing any wrong HTML escaping.
- Looked through it for any glaring security or correctness problems.
This code isn't very pretty or modern, but as far as I can tell it's safe and does render Figlet fonts in a reasonable way.
Test Plan: {F803268}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9408, T7785
Differential Revision: https://secure.phabricator.com/D14102
Summary:
Ref T7785. Convert the Cowsay Remarkup rule to use a PHP implementation so we don't have to execute an external `cowsay` binary.
I removed some of the default ".cow" files that come with Cowsay because they:
- include Perl code which we can not interpret; or
- are primarily in-jokes or standalone visual puns or artwork rather than usable actors on the grand stage of cowsay; or
- offended my delicate sensibilities.
Users can add new cows to `resources/cows/custom/` if they want to make new cows available.
I have included a majestic original artwork depicting the "Companion Cube" character from //Portal//.
Test Plan: {F802535}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9408, T7785
Differential Revision: https://secure.phabricator.com/D14100
Summary: Ref T9408. This rule is unsafe in principle, and a practical vulnerability has been found by a security researcher.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9408
Differential Revision: https://secure.phabricator.com/D14103
Summary:
Fixes T9126. In particular:
- Add "Browse" links to all history views.
- Use icons to show "Browse" and "History" links, instead of text.
- Use FontAwesome.
- Generally standardize handling of these elements.
This might need a little design attention, but I think it's an improvement overall.
Test Plan:
- Viewed repository history.
- Viewed branch history.
- Viewed file history.
- Viewed table of contents on a commit.
- Viewed merged changes on a merge commit.
- Viewed a directory containing an external.
- Viewed a deleted file.
{F788419}
{F788420}
{F788421}
{F788422}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9126
Differential Revision: https://secure.phabricator.com/D14096
Summary: Fixes T8572. Ideally we would probably just permit this, but clean up the behavior until the day arrives when inline code is actually rewritten.
Test Plan:
- Tried to launch editors in Differential and Diffusion while comments were already open.
- Verified that "Jump to inline" works in both cases.
{F788008}
{F788009}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8572
Differential Revision: https://secure.phabricator.com/D14094
Summary: See D14025. In all cases where we compare hashes, use strict, constant-time comparisons.
Test Plan: Logged in, logged out, added TOTP, ran Conduit, terminated sessions, submitted forms, changed password. Tweaked CSRF token, got rejected.
Reviewers: chad
Reviewed By: chad
Subscribers: chenxiruanhai
Differential Revision: https://secure.phabricator.com/D14026
Summary: Fixes T9135. This is (probably) never intended and can be confusing.
Test Plan: Saw no hide button on unpublished inlines. Saw hide button on published inlines. Clicked hide button.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9135
Differential Revision: https://secure.phabricator.com/D14014
Summary:
Email is so exciting I can't wait 30 days for initial results.
ref T9161
Test Plan:
* `./bin/mail volume --days 60` took longer and gave plausibly larger
results.
* `./bin/mail volume --days 0` quickly told me no mail had been sent.
* `./bin/mail volume` Said it was still looking 30 days back.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T9161
Differential Revision: https://secure.phabricator.com/D13901
Summary:
We currently detect tab panels embedding themselves, but do not detect text panels embedding themselves with `{Wxx}`.
Detect these self-embedding panels.
I had to add a bit of a hack to pass the parent panel PHIDs to the rule. Generally, I got the Markup API kind of wrong and want to update it, I'll file a followup with details about how I'd like to move forward.
Test Plan:
Created a text panel embedding itself, a tab panel embedding a text panel embedding itself, a tab panel embedding a text panel embedding the tab panel, etc.
Rendered all panels standalone and as `{Wxx}` from a different context.
{F761158}
{F761159}
{F761160}
{F761161}
{F761162}
Reviewers: chad, jbeta
Reviewed By: chad, jbeta
Differential Revision: https://secure.phabricator.com/D13999
Summary:
Fixes T9268. Currently, we try to match any string like "a2f313f1" as a commit/revision, so short hashes will get picked up.
However, we don't require a word boundary or terminal after the match, so for input like "aaa...aaaaz" the engine can get stuck trying to split the string into sub-matches.
That is, in the original case, the input "aaaz" had valid matches against `[rA-Z0-9a-f]+` up to "z" of:
aaa
aa a
a aa
a a a
All of these will fail once it hits "z", but it has to try them all. This complexity is explosive with longer strings.
Instead, require a word boundary or EOL after the match, so this is the only valid match:
aaa
Then the engine sees the "z", says "nope, no match" and doesn't have to backtrack across all possible combinations.
Test Plan: Added a failing unit test, applied patch, clean test.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9268
Differential Revision: https://secure.phabricator.com/D13997
Summary:
Ref T8672. Ref T9187. Root issue in at least one case is:
- User makes a commit including a file with some non-UTF8 text (say, a Japanese file full of Shift-JIS).
- We pass the file to the TransactionEditor so it can inline or attach the patch if the server is configured for these things.
- When inlining patches, we convert them to UTF8 before inlining. We must do this since the rest of the mail is UTF8.
- When attaching patches, we send them in the original encoding (as file attachments). This is correct, and means we need to give the worker the raw patch in whatever encoding it was originally in: we can't just convert it to utf8 earlier, or we'd attach the wrong patch in some cases.
- TransactionEditor does its thing (e.g., creates the commit), then gets ready to send mail about whatever it did.
- The publishing work now happens in the daemon queue, so we prepare to queue a PublishWorker and pass it the patch (with some other data).
- When we queue workers, we serialize the state data with JSON.
So far, so good. But this is where things go wrong:
- JSON can't encode binary data, and can't encode Shift-JIS. The encoding silently fails and we ignore it.
Then we get to the worker, and things go wrong-er:
- Since the data is bad, we fatal. This isn't a permanent failure, so we continue retrying the task indefinitely.
This applies several fixes:
# When queueing tasks, fail loudly when JSON encoding fails.
# In the worker, fail permanently when data can't be decoded.
# Allow Editors to specify that some of their data is binary and needs special handling.
This is fairly messy, but some simpler alternatives don't seem like good ways forward:
- We can't convert to UTF8 earlier, because we need the original raw patch when adding it as an attachment.
- We could encode //only// this field, but I suspect some other fields will also need attention, so that adding a mechanism will be worthwhile. In particular, I suspect filenames //may// be causing a similar problem in some cases.
- We could convert task data to always use a serialize()-based binary safe encoding, but this is a larger change and I think it's correct that things are UTF8 by default, even if it makes a bit of a mess. I'd rather have an explicit mess like this than a lot of binary data floating around.
The change to make `LiskDAO` will almost certainly catch some other problems too, so I'm going to hold this until after `stable` is cut. These problems were existing problems (i.e., the code was previously breaking or destroying data) so it's definitely correct to catch them, but this will make the problems much more obvious/urgent than they previously were.
Test Plan:
- Created a commit with a bunch of Shift-JIS stuff in a file.
- Tried to import it.
Prior to patch:
- Broken PublishWorker with distant, irrelevant error message.
With patch partially applied (only new error checking):
- Explicit, local error message about bad key in serialized data.
With patch fully applied:
- Import went fine and mail generated.
Reviewers: chad
Reviewed By: chad
Subscribers: devurandom, nevogd
Maniphest Tasks: T8672, T9187
Differential Revision: https://secure.phabricator.com/D13939
Summary:
Ref T9218. See discussion there for rationale; I think this is the right behavior to pursue.
The screenshot below is pretty ugly. I think it's a lot worse than most real-world cases will be, since you have to sort of opt-in to having crazy levels of overlapping packages, and it's perfectly normal/reasonable for files owned by one package. Owners is powerful enough to let you specify sub-packages with exclusive ownership.
That said, this may be more typical than I hope. I don't think we can reduce the complexity here much for free, but it would might be reasonable to add some view options (e.g.: group by package?, show only packages I own?, show packages as icons with a tooltip?) if it's an issue.
Test Plan: {F734956}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9218
Differential Revision: https://secure.phabricator.com/D13940
Summary:
Fixes T8004.
- For paths which are part of a package, show the package.
- Highlight paths which are part of a package you (the viewer) have authority over.
Test Plan:
{F725418}
- Viewed owned and unowned chagnes in Diffusion and Differential.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8004
Differential Revision: https://secure.phabricator.com/D13923
Summary:
Fixes T2183. We now use the same rendering element in both places.
Intentional changes:
- Package highlighting is out, coming back to both apps in next diff.
- removed redundant-feeling "Change" link. The information is now shown with a character ("M", "V", etc.) and the page is a click away under "History". Clicking the path also jumps you to substantially similar content. (We could restore it fairly easily, I just think it's probably the least useful thing in the table right now.)
Test Plan: Viewed a bunch of commits in Diffusion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2183
Differential Revision: https://secure.phabricator.com/D13910
Summary:
Ref T2183. Introduces a new View which can (in theory) unify the Revision, Diff and Commit table of contents views.
This has the same behavior as before, but accepts slightly more general primitives and parameters and has somewhat cleaner code.
I've made one intentinoal behavior change: removing the "Open All in Editor" button. I suspect this is essentially unused, and is a pain to keep around. We can look at restoring it if anyone notices.
Test Plan: Looked at a bunch of revisions, no changes from before.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2183
Differential Revision: https://secure.phabricator.com/D13908
Summary: Fixes T9099, I think this is as much as I can come up with for unbeta. Cleans up the answer header (profile image, smaller font, smaller header). Cleans up voting (new, with color), and makes it a bit more readable.
Test Plan:
Review a number of answers in ponder with and without votes, comments.
{F720189}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9099
Differential Revision: https://secure.phabricator.com/D13907
Summary: Use `PhutilClassMaQuery` instead of `PhutilSymbolLoader`, mostly for consistency. Depends on D13588.
Test Plan: Poked around a bunch of pages.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13589
Summary:
Fixes T7370. Two changes:
- Make the default to show nothing, instead of showing all the data. This is a better default because the data is sometimes sensitive. Workers should have to opt in to revealing it.
- For TargetWorkers, link to the target (technically the build, for now, since there's no dedicated target detail page).
Test Plan: {F698325}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7370
Differential Revision: https://secure.phabricator.com/D13845
Summary: Ref T3578 Allows display of projects if available on individual ponder search results.
Test Plan: Added projects to my questions, see them display on search results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T3578
Differential Revision: https://secure.phabricator.com/D13793
Summary: Ref T8726. Convert these to be modular.
Test Plan:
- Created rules using these actions.
- Upgraded them.
- Verified they still work.
{F659266}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13705
Summary: Ref T8726. No surprises.
Test Plan:
Created rules using both action variants, applied upgrade, saw rules still work correctly.
{F658842}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13701
Summary: Ref T8726. Converts these actions to be modular. No real surprises in this change.
Test Plan:
{F658709}
- Wrote some rules.
- Migrated them forward.
- Used a bunch of these rules.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13699
Summary: DRAFT - throw together Phurl skeleton.
Test Plan: The idea is that `some/long/url` will become `install/Udet4d` and can be viewed and edited at `install/Udet4d/view` and `install/Udet4d/edit`, respectively?
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: joshuaspence, chad, epriestley, Korvin
Maniphest Tasks: T6049
Differential Revision: https://secure.phabricator.com/D13681
Summary:
Basic plumbing for Badges application.
- You can make Badges.
- You can look at a list of them.
- They can be edited.
- They can be assigned to people.
- You can revoke them from people.
- You can subscribe to them.
Test Plan: Make Badges with various options. Give them to people. Take them away from people.
Reviewers: lpriestley, epriestley
Reviewed By: epriestley
Subscribers: tycho.tatitscheff, johnny-bit, epriestley, Korvin
Maniphest Tasks: T6526
Differential Revision: https://secure.phabricator.com/D13626
Summary:
Fixes T8917. Prior to T2618, deleting inlines prompted users, then really deleted the rows.
After T2618, we delete immediately and offer "Undo". However, some interactions with drafts were missed, and we were only clearing the "this revision has a draft" flag on one of the delete pathways (when you delete all the comment text, then save the comment).
Make both the "Delete" action and the "Delete All Comment Text + Save" workflows do the same thing: mark the row as deleted, and clear any relevant drafts.
Test Plan:
- Made an inline comment on a clean revision with no "draft comments" marker in the list view.
- Used "delete" to delete it.
- After applying the patch, verified that no "draft commetns" marker appears in the list view.
- Used Delete and Edit + Remove Text + Save to delete comments in Differential and Diffusion.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8917
Differential Revision: https://secure.phabricator.com/D13665
Summary: I assume this is correct, it fixes my test case and was inconsistent with the rest of the file.
Test Plan: Add and Remove a CustomFieldPHID in Maniphest, no longer get errors.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8866
Differential Revision: https://secure.phabricator.com/D13642
Summary:
Ref T8726. Some adapters now have a large number of fields, and we lost the sort-of-human-readable implicit ordering when fields were modularized.
Instead, group and sort fields.
Test Plan: {F603066}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13619
Summary: Ref T8726. This gets rid of all the `VALUE_*` constants and lets Fields provide arbitrary typeaheads without upstream/JS changes.
Test Plan: Used all tokenizers. Used "Another Herald Rule". Grepped for all removed constants.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13616
Summary: Use `PhutilClassMapQuery` where appropriate.
Test Plan: Browsed around the UI to verify things seemed somewhat working.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13429
Summary: Ref T8726. The existing implementation is largely made redundant by the newer modular implementation.
Test Plan: Created a custom field rule, set custom field to various values until it matched, saw effect and proper transcripts.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: eadler, joshuaspence, epriestley
Maniphest Tasks: T8726
Differential Revision: https://secure.phabricator.com/D13497
Summary: Return `$this` from setter methods for consistency. I started writing a [[https://secure.phabricator.com/differential/diff/32506/ | linter rule]] to detect this, but I don't think it is trivial to do this properly.
Test Plan: Eyeball it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13422
Summary: Move some `PhabricatorSearchField` subclasses to be adjacent to the application to which they belong. This seems generally better to me than lumping them all together in the `src/applications/search/field/` directory. I was also wondering if it makes sense to rename these subclasses as `PhabricatorXSearchField` rather than `PhabricatorSearchXField` (as per T5655), but wasn't really sure if these objects are meant to be search-fields, or just fields belonging to the #search application.
Test Plan: N/A.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D13374
Summary: Ref T8750, Adds a maxwidth class for Graphviz images.
Test Plan: Generate a Graphviz image, really big, see it scale to the viewport.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8750
Differential Revision: https://secure.phabricator.com/D13548
Summary:
Fixes T8743. Fixes T8746. When running queries with the omnipotent viewer and no explicit space constraints, don't add implicit space constraints.
This prevents us from fataling when running older pre-space migrations and trying to load space-aware objects.
Test Plan: Manually ran migrations with `--trace`, verified no `WHERE spacePHID = ...`.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: eadler, epriestley
Maniphest Tasks: T8743, T8746
Differential Revision: https://secure.phabricator.com/D13542
Summary:
Ref T8731. I think the issue is that some `ProjectQuery` (without needImages()) populates the query workspace, then the "real" one hits the workspace.
Instead, only populate the workspace from ObjectQuery, so we know that objects in the workspace always have whatever ObjectQuery attaches to them.
Test Plan: Verified this didn't destroy the cache hitrate, but I can't repro the original issue locally per se.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T8731
Differential Revision: https://secure.phabricator.com/D13516
Summary: Ref T8099. Better alignment with TODO and Ghost Icons.
Test Plan: Test more states of inline comments, ghosts, todos, unsubmitted, etc.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13515
Summary:
Ref T8631. The query plan for feed stories is really bad right now, because we miss caches we should be hitting:
- The workspace cache is stored at each query, so adjacent queries can't benefit from the cache (only subqueries). Feed has primarily sibling queries.
- There is no technical reason to do this. Store the workspace cache on the root query, so sibling queries can hit it.
- In `ObjectQuery`, we check the workspace once, then load all the PHIDs. When the PHIDs are a mixture of transactions and objects, we always miss the workspace and load the objects twice.
- Instead, check the workspace after loading each type of object.
- `HandleQuery` does not set itself as the parent query for `ObjectQuery`, so handles never hit the workspace cache.
- Pass it, so they can hit the workspace cache.
- Feed's weird `PhabricatorFeedStory::loadAllFromRows()` method does not specify a parent query on its object/handle queries.
- Just declare the object query to be the "root" query until this eventually gets cleaned up.
Test Plan: Saw queries for each object drop from 4-6x to 1x in `/feed/`.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8631
Differential Revision: https://secure.phabricator.com/D13479
Summary: Fixes T8723. We override timeline titles for these fields to shorten them, but the parent class shows full values for feed edits, which can lead to screen-sized notifications.
Test Plan: Edited a project, saw a reasonably-sized notification for it.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T8723
Differential Revision: https://secure.phabricator.com/D13485
Summary: Ref T8099, Simplifies the button bar with a `borderless` option and implements in Differential Inline Commenting.
Test Plan:
Review new and old comments, submitted, unsubmitted, ghosts, done.
{F562765}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T8099
Differential Revision: https://secure.phabricator.com/D13475
Summary:
Ref T8637. This does nothing interesting, just has empty scaffolding for a bulk job queue.
Basic idea is that when you do something like a batch edit in Maniphest, we:
- Create a BulkJob with all the details.
- Queue a worker to start the job.
- Send you to a progress bar page for the job.
In the background:
- The "start job" worker creates a ton of Task objects, then queues worker tasks to do the work.
In the foreground:
- Fancy ajax animates the progress bar and it goes wooosh.
In general:
- Big jobs actually work.
- Jobs get logged.
- You can monitor jobs.
- Terrible junk like T8637 should be much harder to write and much easier to catch and diagnose.
Test Plan:
No interesting code/beahavior yet. Clean `storage adjust`.
{F526411}
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8637
Differential Revision: https://secure.phabricator.com/D13392
Summary:
Ref T8096. Various tweaks here:
- Sort result lists by importance (even lint -- "errors first" seems better than "alphabetical by file", I think?).
- Do sane stuff with display limits.
- Add a "view all" view.
- Don't show a huge table of passing tests in Differential.
- Link to full results.
Test Plan: See screenshots.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T8096
Differential Revision: https://secure.phabricator.com/D13407
Summary: Fixes T8599. I'm not sure how to reproduce the original issue, but I'm fairly confident that the issue is that the issue is that `execute()` is not called on the query object.
Test Plan: Created a Harbormaster build plan with a single "Lease Host" step. Ran `./bin/harbormaster build --plan 1 D1` from the command line and hit the exception as described in T8599. Applied patch and hit a different exception (which I think is just because I don't know how to use #drydock and #harbormaster).
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T8599
Differential Revision: https://secure.phabricator.com/D13335
Summary:
Ref T8575. Because orderable columns need to build custom fields, they are relatively expensive to build. Use the request cache.
(The request cache is technically more correct than `static`, because configuration may change between requests and we may eventually reuse interpreters.)
Test Plan: Saw home page time drop 39% (from 462ms to 283ms).
Reviewers: btrahan, avivey
Reviewed By: avivey
Subscribers: avivey, epriestley
Maniphest Tasks: T8575
Differential Revision: https://secure.phabricator.com/D13322
Summary: Ref T8575. We check if users can see applications frequently, and caching on the Query isn't especially effective. Use the new Request cache instead.
Test Plan:
- Saw `/feed/` drop 7% (from ~830ms to ~770ms) on profiles.
Reviewers: btrahan, avivey
Reviewed By: avivey
Subscribers: avivey, epriestley
Maniphest Tasks: T8575
Differential Revision: https://secure.phabricator.com/D13321
Summary:
Ref T4558. This diff modernizes the #diviner application. Basically:
- Add an edit controller, accessible at `/book/$BOOK/edit/`.
- Add edit/view policies.
- Added an action menu to the `DivinerBookController` to expose the edit interface.
- Allows projects to be associated with books.
- Implement edges and transactions.
- Implemented `PhabricatorApplicationTransactionInterface` in `DivinerLiveBook`.
Test Plan:
- Generated a Diviner book with `./bin/diviner generate`.
- Added projects to a book and ensured that they persisted.
- Changed the view policy on a book and made sure it was effective.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4558
Differential Revision: https://secure.phabricator.com/D13091
