Summary:
Ref T13513. Give selected inlines a selection state and visual cues which are similar to the changeset selection state.
Also fix a couple of minor issues with select interactions and offset comments.
Test Plan: Selected inlines, saw obvious visual cues.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21256
Summary: Ref T13513. Currently, clicking inline or changeset headers eats the click events. This doesn't serve any clear purpose, and means these clicks do not clear text selections from the document, which is unusual.
Test Plan:
- Selected some text in a diff.
- Clicked a changeset header to select it.
- Before patch: text selection and context menu were retained.
- After patch: text selection was cleared and context menu was dismissed.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21255
Summary:
Ref T13513. In Safari, do this:
- view a 2-up diff with content on both sides;
- select more than one line on the right side; and
- use your mouse to click "New Inline Comment" in the context menu that pops up.
The mousedown event for the "New Inline Comment" click removes the "copy selection" behavior and creates a flash where both sides of the diff are selected.
This doesn't happen with (most) normal clicks because mouse down on a non-grabbable element clears the document selection.
To avoid this, don't reset the copy selection behavior if the user mouses down on an "<a />". This might not be robust, but seems simple and plausible as a fix.
Test Plan:
- See above.
- Before patch: flash of overbroad selection when clicking "New Inline Comment".
- After patch: no selection flash.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21254
Summary: Ref T13513. This fixes a bug where clicking a line number, then clicking "Cancel" causes the paths panel to briefly update with an extra inline comment counted on the file.
Test Plan:
- Clicked a line number.
- Typed some text.
- Clicked "Cancel".
- Before patch: paths panel flashes "1".
- After patch: paths panel stays stable.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21253
Summary:
Ref T13513. Currently, when creating an inline by selecting a line range, slightly careless handling leads to an inline with "0" offsets (by passing "undefined" to the server). This causes the block to highlight every line except the last one as fully bright, which is incorrect.
An inline with "0" offsets and an inline with no offsets are different. Be more careful about passing offsets around and rendering them.
Test Plan:
- Used the line numbers to add an inline to lines 4-8 of a change.
- Hovered the inline.
- Saw all four lines marked as "dull"-highlighted (previously: three bright lines, one dull line).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21252
Summary:
Ref T13513. When a user selects a text range and uses "New Inline Comment" to create a comment directly from a range, store the offset information alongside the comment.
When hovering the comment, highlight the original range.
Test Plan: {F7480926, size=full}
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21250
Summary:
Ref T13513.
- Firefox represents multiple selected rows as a discontinuous range. Accommodate this.
- Unified diffs don't have a "copy" marker. Do something sort-of-reasonable for them.
Test Plan:
- Selected multiple lines of content in Firefox, got an option to add a comment.
- Selected content in unified mode, got an option to add a comment.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21249
Summary: Ref T13513. Support direct text selection for inlines. This is currently just an alternate way to get to the same place as using line numbers, but can preserve offset/range information in the future.
Test Plan:
- Selected some text, hit "c", clicked "New Inline Comment", got sensible comments on both sides of a diff in Safari, Chrome, and (with limitations) Firefox.
- Caveats: no unified support, doesn't work across lines in Firefox.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21248
Summary: Ref T11401. Ref T13513. This paves the way for more comment actions, particularly an edit-after-submit action.
Test Plan: Took all actions from menus, via mouse and via keyboard (where applicable).
Maniphest Tasks: T13513, T11401
Differential Revision: https://secure.phabricator.com/D21244
Summary: See <https://github.com/phacility/phabricator/pull/854>. In some situations, `line-break: anywhere` produces better behavior than `word-break: break-all`. It never appears to produce worse behavior.
Test Plan:
- Break behavior changes if a line contains "<span />" elements caused by syntax highlighting. This CSS adjustment only appears to apply to text with internal "<span />" elements.
- This specifically impacts certain internal breakpoints adjacent to punctuation, so the test case is highly specific. Generic test cases with latin word characters do not evidence any behavioral changes.
- This change appears to have no impact on Safari, which uses the better behavior in all cases.
- Before Patch: In Firefox and Chrome, this specific change breaks awkwardly. There is more room for text to fit on the broken line:
Firefox
{F7480567}
Chrome
{F7480568}
- After Patch: Firefox and Chrome break the line better. Here's Firefox:
{F7480569}
- Additional context:
Safari Behavior (Unchanged)
{F7480570}
Chrome with no highlighting (desirable behavior). Firefox does the same thing.
{F7480571}
Also tested other cases, which seem never-worse in any browser.
{F7480574}
Differential Revision: https://secure.phabricator.com/D21247
Summary:
Ref T13513. Currently, "View as Document Type..." lists every available engine.
This is hard to get completely right because we can't always rebuild the document ref accurately in the endpoint, but try harder to fake something reasonable.
Test Plan: Used "View as Document Type..." on Jupyter notebooks, was given "Jupyter" and "Source" as options.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21241
Summary:
Ref T13513. As part of inline metadata, save the document engine the change is being rendered with.
This will allow other parts of the UI to detect that an inline was created on a Jupyter notebook but is being rendered on raw source, or whatever else.
The immediate goal is to fix nonsensical inline snippet rendering in email on Jupyter notebooks.
Test Plan:
- Created inlines and replies on normal soure code, saw no document engine annotated in the database.
- Created inlines and replies on a Jupyter notebook rendered in Jupyter mode, saw "jupyter" annotations in the database.
- Swapped document engines between Jupyter and Source, etc.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21240
Summary: Ref T13513. Currently, if you're editing a comment, "delete" doesn't put the comment into the correct state. This action is normally only reachable from comment previews, since an editing inline has no "delete" button.
Test Plan:
- Started editing an inline, clicked "Delete", got a deletion.
- Created an inline, typed text,
- Deleted a normal comment via preview.
- Deleted a normal comment via the on-inline action.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21238
Summary:
Ref T13513. Currently, clicking "View" from the inline comment preview (below the "add comment" area at the bottom of the page) only works if the inline isn't being edited.
Update this behavior so it works on inlines in either "Viewing" or "Editing" states.
Test Plan:
- Clicked "View" on a normal inline, got jumped/selected.
- Clicked "View" on an editing inline, got jumped/selected.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21237
Summary:
Ref T13513. Currently:
- If you click the "Show Changeset" button, your state change doesn't actually get saved on the server.
- It's hard to select a changeset path name for copy/paste because the "highlight the header" code tends to eat the event.
Instead: persist the former event; make the actual path text not be part of the highlight hitbox.
Test Plan:
- Clicked "Show Changeset", reloaded, saw changeset visibility persisted.
- Selected changeset path text without issues.
- Clicked non-text header area to select/deselect changesets.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21236
Summary:
Ref T13513. Currently, inline storage objects ("TransactionComment") can't directly generate a runtime object ("InlineComment").
Allow this transformation to be performed in a genric way so clunky code which does it per-object-type can be removed, lifted, or simplified.
Simplify an especially gross callsite in preview code.
Test Plan: Previewed inline comments.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21226
Summary: See D21213. If there's no matching element, `findAbove()` throws. Handle these cases correctly.
Test Plan: Visited `#toc` on a revision, no longer saw a JS error.
Differential Revision: https://secure.phabricator.com/D21222
Summary:
Ref T13513. Overloading "original text" to get "edit-on-load" comments into the right state has some undesirable side effects.
Instead, provide the text when the editor opens. This fixes a cancel interaction.
Test Plan:
- Create an inline, type text, don't save.
- Reload page.
- Cancel.
- Before: cancelled into empty state.
- After: cancelled into deleted+undo state.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21219
Summary:
Ref T13513. This is a bit clumsy, but the cleanest way to implement "isEditing" inlines today is to send them down as normal inlines and then simulate clicking "edit" on them.
When we do, don't focus the resulting editor: focusing it makes the page scroll around and highlight things in essentially random order as the editors load in.
Test Plan: Reloaded a page with some open editors, wasn't scrolled to them.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21217
Summary:
Ref T13513. As users type text into inline comments, save the comment state as a draft on the server.
This has some rough edges, particularly around previews, but mostly works. See T13513 for notes.
Test Plan: Started an inline, typed some text, waited a second, reloaded the page, saw an editing inline with the saved text.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21216
Summary: Ref T13513. Refine some inline behaviors, see test plan.
Test Plan:
- Edit a comment ("A"), type text ("AB"), cancel, edit.
- Old behavior: edit and undo states (wrong, and undo does not function).
- New behavior: edit state only.
- Edit a comment ("A"), type text ("AB"), cancel. Undo ("AB"), cancel. Edit.
- Old behavior: "AB" (wrong: you never submitted this text).
- New behavior: "A".
- Create a comment, type text, cancel.
- Old behavior: counter appears in filetree (wrong, comment is undo-able but should not be counted).
- New behavior: no counter.
- Cancel editing an empty comment with no text.
- Old behavior: Something buggy -- undo, I think?
- New behavior: it just vanishes (correct behavior).
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21212
Summary: Ref T13513. This slightly expands the existing-but-hacky "warning" workflow to cover both "mentions on draft" and "submitting inlines being edited".
Test Plan:
- Submitted changes to a revision with mentions on a draft, inlines being edited, both, and neither.
- Got sensible warnings in the cases where warnings were appropriate.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21191
Summary:
Ref T13513. Now that the "currently being edited" state of inlines is saved on the server side, clear the flag when the user clicks "Cancel" to leave the "editing" state on the client.
This also serves to delete empty comments.
Test Plan:
- Clicked a line number to create a new comment. Then:
- Clicked "Cancel". Reloaded page, saw no more comment.
- Typed text, saved. Reloaded page, saw non-editing draft. Clicked "Edit", reloaded page, saw editing draft. Clicked "Cancel", reloaded page, saw non-editing draft.
- Typed text, saved. Clicked "Edit", deleted text, saved. Reloaded page, saw no more comment.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21187
Summary:
Ref T13513. This is mostly an infrastructure cleanup change.
In a perfect world, this would be a series of several changes, but they're tightly interconnected and don't have an obvious clean, nontrivial partition (or, at least, I don't see one). Followup changes will exercise this code repeatedly and all of these individual mutations are "obviously good", so I'm not too worried about the breadth of this change.
---
Inline comments are stored as transaction comments in the `PhabricatorAuditTransactionComment` and `DifferentialTransactionComment` classes.
On top of these two storage classes sit `PhabricatorAuditInlineComment` and `DifferentialInlineComment`. Historically, these were an indirection layer over significantly different storage classes, but nowadays both storage classes look pretty similar and most of the logic is actually the same. Prior to this change, these two classes were about 80% copy/pastes of one another.
Part of the reason they're so copy/pastey is that they implement a parent `Interface`. They are the only classes which implement this interface, and the interface does not provide any correctness guarantees (the storage objects are not actually constrained by it).
To simplify this:
- Make `PhabricatorInlineCommentInterface` an abstract base class instead.
- Lift as much code out of the `Audit` and `Differential` subclasses as possible.
- Delete methods which no longer have callers, or have only trivial callers.
---
Inline comments have two `View` rendering classes, `DetailView` and `EditView`. They share very little code.
Partly, this is because `EditView` does not take an `$inline` object. Historically, it needed to be able to operate on inlines that did not have an ID yet, and even further back in history this was probably just an outgrowth of a simple `<form />`.
These classes can be significantly simplified by passing an `$inline` to the `EditView`, instead of individually setting all the properties on the `View` itself. This allows the `DetailView` and `EditView` classes to share a lot of code.
The `EditView` can not fully render its content. Move the content rendering code into the view.
---
Prior to this change, some operations need to work on inlines that don't have an inline ID yet (we assign an ID the first time you "Save" a comment). Since "editing" comments will now be saved, we can instead create a row immediately.
This means that all the inline code can always rely on having a valid ID to work with, even if that ID corresponds to an empty, draft, "isEditing" comment. This simplifies more code in `EditView` and allows the "create" and "reply" code to be merged in `PhabricatorInlineCommentController`.
---
Client-side inline events are currently handled through a mixture of `ChangesetList` listeners (good) and ad-hoc row-level listeners (less good). In particular, the "save", "cancel", and "undo" events are row-level. All other events are list-level.
Move all events to list-level. This is supported by all inlines now having an ID at all stages of their lifecycle.
This allows some of the client behavior to be simplified. It currently depends on binding complex ad-hoc dictionaries into event handlers in `_drawRows()`, but it seems like almost all of this code can be removed. In fact, no more than one row ever seems to be drawn, so this code can probably be simplified further.
---
Finally, save an "isEditing" state. When we rebuild a revision on the client, click the "edit" button if it's in this state. This is a little hacky, but simpler to get into a stable state, since the row layout of an inline depends on a "view row" followed by an "edit row".
Test Plan:
- Created comments on either side of a diff.
- Edited a comment, reloaded, saw edit stick.
- Saved comments, reloaded, saw save stick.
- Edited a comment, typed text, cancelled, "unedited" to get state back.
- Created a comment, typed text, cancelled, "unedited" to get state back.
- Deleted a comment, "undeleted" to get state back.
Weirdness / known issues:
- Drafts don't autosave yet.
- Fixed in D21187:
- When you create an empty comment then reload, you get an empty editor. This is a bit silly.
- "Cancel" does not save state, but should, once drafts autosave.
- Mostly fixed in D21188:
- "Editing" comments aren't handled specially by the overall submission flow.
- "Editing" comments submitted in that state try to edit themselves again on load, which doesn't work.
Subscribers: jmeador
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21186
Summary: Ref T13513. This plans for "currently editing", character range comments, code suggestions, document engine tracking. And absolutely nothing else.
Test Plan:
- Ran `bin/storage upgrade -f`, got a clean upgrade.
- Created and submitted some inline comments; nothing exploded.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21184
Summary:
At some point, the highlighting behavior for the timeline broke. When you follow a link to a particular timeline story, the story should be highlighted.
Prior to this change, the `<a />` tag itself highlights, but there's no associated CSS and it's too deep in the tree to do anything useful.
(Since this change is fairly straightforward, I gave up digging for the root cause before finding it.)
Test Plan:
- Clicked a timeline story anchor, saw the story highlight.
Differential Revision: https://secure.phabricator.com/D21213
Summary:
Ref T13520. Generally, make the table of contents look and more like the paths panel:
- Show a hierarchy, with compression for single-sibling children.
- Use the same icons, instead of "M D" and "(img)" stuff.
- Use EditDistanceMatrix to do a piece-by-piece diff of paths changes.
- Show path changes within the path list.
I'm not entirely sold on this, but it was complicated to write and I've never heard the term "sunk cost fallacy". I think this is mostly a net improvement, but may need some adjustments and followup.
Test Plan: Viewed various changes in Differential and Diffusion, saw a more usable table of contents.
Maniphest Tasks: T13520
Differential Revision: https://secure.phabricator.com/D21183
Summary: Ref T13516. This isn't terribly clean, but get the page footer into the bottom of the content page on FormationView pages so it doesn't overlap into the side panel.
Test Plan: With and without a footer, viewed normal and FormationView pages. Saw footers in appropriate places at appropriate times.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21166
Summary: Ref T13516. Differential got some new UI elements and behaviors, so update static resource package definitions.
Test Plan:
- Saw JS requests drop from 17 to 4.
- Saw CSS requests drop from 9 to 3.
(These won't quite match production since some JS/CSS is for DarkConsole.)
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21163
Summary: Ref T13516. Hide this UI on devices without the screen width to reasonably support it.
Test Plan: Viewed a revision at various window widths, saw the elements vanish at device widths and reappear at desktop widths.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21162
Summary:
Ref T13516.
- Add an "Add Comment" navigation anchor.
- Make selection state more clear.
- Make hidden state tidier and more clear.
- Hide "View Options" in the hidden state to dodge all the weird behaviors it implies.
- Click to select/deselect changesets.
- When you open the view dropdown menu, then press "h", close the dropdown menu.
Test Plan: Fiddled with all these behaviors.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21161
Summary:
Ref T13516. Minor improvements here:
- Show key commands in the "View Options" dropdown.
- Organize it slightly better.
- Improve disabled item behaviors a little bit.
- Add a "Browse Directory" action.
- Rename "...in Diffusion" to "...in Repository".
- Make "d", "D", and "h" use the same targeting rules as "\".
- When you hide a file with the "h" menu item, select it.
Test Plan: Poked at the menu a lot, ran into less questionable behavior.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21160
Summary:
Ref T13455. Make "hidden" a changeset property similar to other changeset properties.
We don't need to render this on the server, so we make a request (to update the setting) and just discard the response.
Test Plan: {F7375468}
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21158
Summary: Ref T13516. Mark low-importance changes (generated code, deleted files) and owned-with-authority changes in the filetree.
Test Plan: {F7375327}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21157
Summary:
Ref T13516. Deletes all old filetree / flex / active / collapse nav code in favor of the new code.
Restores the inline tips in the path tree.
Test Plan: {F7374175}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21154
Summary: Ref T13516. Apply basic UI styling to the new UI and make some more interaction work.
Test Plan: {F7374096}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21153
Summary: Ref T13516. Generate a tree structure based on the page changesets. Still missing styles and a whole lot of behavior.
Test Plan: {F7373967}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21152
Summary: Ref T13516. This glues "FormationView" to "ChangesetList". The actual tree is not functional in any meaningful way yet.
Test Plan: {F7373838}
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21151
Summary:
Ref T13516. Currently, the "File Tree" element is a semi-dynamic side panel that's implemented as a special mode of a side nav panel.
This implementation is fairly clunky, and arose from organic growth out of the side nav. As such, it has some weird behaviors, doesn't have builtin support for show/hide, and can't generalize easily.
Introduce a "FormationView" which supports loading a page up with piles of side panels in various modes.
Test Plan: No callers and no user-visible impact.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21150
Summary:
Ref T13515. This restores the "Open in Editor" behavior to Diffusion, and makes "\" work there.
The URI pattern is now sent as a structured template to the client, so the code will work properly if a file path contains "%l".
Test Plan:
- Clicked "Open in Editor" and pressed "\" in Diffusion when viewing a file.
- Clicked a line, hit "\", got the file opened to that line.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21149
Summary:
Ref T13515. Currently, "Open in Editor" only works with a file-level selection.
- If we have a change-level or inline-level selection, open the parent changeset.
- If we have no selection, but the banner is showing something, open the fine shown in the banner.
Test Plan: With files, inlines, changes, and no selection, pressed "\". Saw files pop open in my external editor.
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21148
Summary:
Ref T13515. Adding "\" ("Open in External Editor") made this slighlty worse, but it was already pretty bad.
Long ago the keys had a special style on them, but this got changed and dropped somewhere around D16568 -- although at the time, I think they still had a grey background (see T11654).
Some later change removed this background.
Put the background back and separate the keystrokes into groups.
Test Plan: {F7370615}
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21141
Summary:
Ref T13455. Update the other "view state" properties to work like "highlight" now works.
Some complexity here arises from these concerns:
- In "View Standalone", we render the changeset inline. This is useful for debugging/development, and desirable to retain.
- In all other cases, we render the changeset with AJAX.
So the client needs to be able to learn about the "state" properties of the changeset on two different flows. Prior to this change, each pathway had a fair amount of unique code.
Then, some bookkeeping issues:
- At inital rendering time, we may not know which renderer will be selected: it may be based on the client viewport dimensions.
- Prior to this change, the client didn't separate "value of the property for the changeset as rendered" and "desired value of the property".
Test Plan:
- Viewed changes in Differential, Diffusion, and in standalone mode.
- Toggled renderer, character sets, and document engine (this one isn't terribly useful). Reloaded, saw them stick.
- Started typing a comment, cancelled it, hit the undo UI.
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21138
Summary:
Ref T13455. Add container-level storage for persistent view state, and persist "Highlight As..." inside it.
The storage generates a "PhabricatorChangesetViewState" configuration object as an output.
When preferences are expressed on a diff and that diff is later attached to a revision, we attempt to copy the preferences.
The internal storage tracks per-changeset settings, but currently always uses "last update wins" to apply the settings in the UI.
Test Plan:
- Viewed revisions, changed highlighting, reloaded. Saw highlighting stick in revision view and standalone view.
- Viewed commits, changed highlighting, reloaded. Saw highlighting stick.
- Created a diff, changed highlighting, turned it into a revision, saw highlighting persist.
Subscribers: jmeador, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13455
Differential Revision: https://secure.phabricator.com/D21137
Summary: Ref T13515. See PHI1661. If a file is selected, add a keystroke to click the "Open in External Editor" link.
Test Plan: In Safari, Chrome, and Firefox: used "J" to select a file, then "\" to open it in an external editor. (In Safari and Chrome, this prompts.)
Maniphest Tasks: T13515
Differential Revision: https://secure.phabricator.com/D21135
Summary:
Fixes T13508. The "Notification" and "Messages" icons in the menu bar have a CSS transition animation on hover.
In Chrome, when this element moves up 2px, you can get a flicker in and out of the hover state if the user's cursor is at the very bottom of the element, since the bounding box for the element is rapidly sliding in and out of the area under the cursor.
To fix this: as we move the element up, also make it taller.
Test Plan: In Safari, Chrome, and Firefox: put my cursor at the very bottom of the element, no longer saw any animation flickering.
Maniphest Tasks: T13508
Differential Revision: https://secure.phabricator.com/D21133
Summary:
Fixes T13510. This migration currently fails because it tries to affect the "paste" database, but when it runs this database will be named "pastebin".
Since the cost of fixing it in place or moving it past the rename migration both seem relatively high (and the cost of throwing it away is plausibly zero) just throw it for now.
Test Plan: Looked at file, saw no more code that can execute.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13510
Differential Revision: https://secure.phabricator.com/D21132
Summary:
Ref PHI1292. Enable fulltext searchs in paste. Maybe this should only index a snippet instead of the entire content?
Also updates table names in `PhabricatorPasteQuery`.
Test Plan: Created some pastes, indexed them, searched for them.
Reviewers: amckinley
Subscribers: codeblock, Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20650
Summary:
See <https://discourse.phabricator-community.org/t/storage-upgrade-error/3748>.
It is broadly unsafe for migrations to use "save()". If the object gains new fields later, the query will include "SET newField = X", which will fail against the old schema which is in the process of being upgraded.
Instead, migrations must issue raw SQL against the schema as it is expected to exist at the time the migration executes.
Migrations have followed this rule for a long time, but this ~6 year old migration was overlooked. Update it to issue a raw query to perform the policy update.
Test Plan: This is somewhat flimsy since rebuilding a genuine reproduction case is messy, but used "bin/storage --apply ..." to at least get the new query to execute against modern Phabricator without issues.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D21124
Summary:
Fixes T5028. Older versions of Git (apparently, from before 2010) did not provide a way to extract the raw body of a commit message from "git log", so we approximate it with "subject" and "wrapped body".
In newer versions of Git, the raw body can be extracted exactly.
Adjust how we extract messages based on the version of Git, and try to be more faithful to edge cases: particularly, be more careful to extract the correct number of trailing newlines.
Test Plan:
- Added "var_dump()" + "die(1)" later in this method, then pushed various commit messages. Used "&& false" to force execution down the old path (either path should work in modern Git).
- Observed more faithful extraction of messages, including a more faithful extraction of the number of trailing newlines. Extraction is fully faithful if we can go down the "%B" path, which we should be able to in nearly all modern cases.
- Not all messages extract faithfully or consistently across the old and new versions, but the old extraction is destructive so this is likely about as close as we can realistically ever get.
Maniphest Tasks: T5028
Differential Revision: https://secure.phabricator.com/D21027
Summary:
Depends on D21018. Ref T13493. Ref T6703. The "ExternalAccount" table has a unique key on `<accountType, accountDomain, accountID>` but this no longer matches our model of reality and changes in this sequence end writes to `accountID`.
Remove this key.
Then, remove all readers of `accountType` and `accountDomain` (and all nontrivial writers) because none of these callsites are well-aligned with plans in T6703.
This change has no user-facing impact today: all the rules about linking/unlinking/etc remain unchanged, because other rules currently prevent creation of more than one provider with a given "accountType".
Test Plan:
- Linked an OAuth1 account (JIRA).
- Linked an OAuth2 account (Asana).
- Used `bin/auth refresh` to cycle OAuth tokens.
- Grepped for affected symbols.
- Published an Asana update.
- Published a JIRA link.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13493, T6703
Differential Revision: https://secure.phabricator.com/D21019
Summary: Depends on D21016. Ref T13493. This copies existing external account "accountID" values into the "ExternalAccountIdentifier" table, preparing for an authority switch.
Test Plan: Ran migration several times, looked at the data that came out of it, saw sensible results. Logged out / in with external accounts.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21017
Summary:
Depends on D21010. Ref T13493. External accounts may have multiple different unique identifiers, most often when v1 of the API makes a questionable choice (and provies a mutable, non-unique, or PII identifier) and v2 of the API uses an immutable, unique, random identifier.
Allow Phabricator to store multiple identifiers per external account.
Test Plan: Storage only, see followup changes.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13493
Differential Revision: https://secure.phabricator.com/D21011
Summary: Ref T13395. Moves a small amount of remaining "libphutil/" code into "phabricator/" and stops us from loading "libphutil/".
Test Plan: Browsed around; there are likely remaining issues.
Maniphest Tasks: T13395
Differential Revision: https://secure.phabricator.com/D20981
Summary:
Depends on D20966. Ref T13486. Curtains currently render subscribers in a plain text list, but the new ref list element is a good fit for this.
Also, improve the sorting and ordering behavior.
This makes the subscriber list take up a bit more space, but it should make it a lot easier to read at a glance.
Test Plan: Viewed object subscriber lists at varying limits and subscriber counts, saw sensible subscriber lists.
Maniphest Tasks: T13486
Differential Revision: https://secure.phabricator.com/D20967
Summary:
Ref T13486. When a curtain element like "Author" in Maniphest has a very long username, the wrapping and overflow behavior is poor: the date is obscured.
Adjust curtain elements which contain lists of references to other objects to improve wrapping behavior (put the date on a separate line) and overflow behavior (so we get a "..." when a name overflows).
Test Plan: {F7179376}
Maniphest Tasks: T13486
Differential Revision: https://secure.phabricator.com/D20966
Summary: Ref T13480. Creating a rule in Herald currently uses the older radio-button flow. Update it to the "clickable menu" flow to simplify it a little bit.
Test Plan: Created new personal, object, and global rules. Hit the object rule error conditions.
Maniphest Tasks: T13480
Differential Revision: https://secure.phabricator.com/D20956
Summary: Depends on D20931. Ref T13362. Move all "Console"-style interfaces to use a consistent layout based on a new "LauncherView" which just centers the content.
Test Plan: Viewed all affected interfaces.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13362
Differential Revision: https://secure.phabricator.com/D20933
Summary: Fixes T13482. Although this style makes physical sense by relationship to a written checklist, it seems to do more harm than good in practice.
Test Plan: Wrote a checklist with a checked-off item in remarkup, saw no more line-through.
Maniphest Tasks: T13482
Differential Revision: https://secure.phabricator.com/D20954
Summary: Fixes T13476. Policy tags in object headers and "Visible To" controls in some dialog contexts may stack and wrap oddly. Improve spacing so they don't overlap visually when wrapping.
Test Plan: Viewed affected interfaces in narrow and wide windows.
Maniphest Tasks: T13476
Differential Revision: https://secure.phabricator.com/D20944
Summary:
Ref T13444. To interact meaningfully with "DestructionEngine", objects need a PHID. The "UserEmail" object currently does not have one (or a real "Query").
Provide basic PHID support so "DestructionEngine" can interact with the object more powerfully.
Test Plan:
- Ran migrations, checked data in database, saw sensible PHIDs assigned.
- Added a new email address to my account, saw it get a PHID.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20913
Summary:
Ref T13444. You can currently explicitly unassign an identity (useful if the matching algorithm is misfiring). However, this populates the "currentEffectiveUserPHID" with the "unassigned()" token, which mostly makes things more difficult.
When an identity is explicitly unassigned, convert that into an explicit `null` in the effective user PHID.
Then, realign "assigned" / "effective" language a bit. Previously, `withAssigneePHIDs(...)` actualy queried effective users, which was misleading. Finally, bulk up the list view a little bit to make testing slightly easier.
Test Plan:
- Unassigned an identity, ran migration, saw `currentEffectiveUserPHID` become `NULL` for the identity.
- Unassigned a fresh identity, saw NULL.
- Queried for various identities under the modified constraints.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20908
Summary:
Ref T13444. Currently, identities for a particular email address are queried with "LIKE" against a binary column, which makes the query case-sensitive.
- Extract the email address into a separate "sort255" column.
- Add a key for it.
- Make the query a standard "IN (%Ls)" query.
- Deal with weird cases where an email address is 10000 bytes long or full of binary junk.
Test Plan:
- Ran migration, inspected database for general sanity.
- Ran query script in T13444, saw it return the same hits for "git@" and "GIT@".
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13444
Differential Revision: https://secure.phabricator.com/D20907
Summary:
Fixes T13461. Some applications provide hints about policy strength in the header, but these hints are inconsistent and somewhat confusing. They don't make much sense for modern objects with Custom Forms, which don't have a single "default" policy.
Remove this feature since it seems to be confusing things more than illuminating them.
Test Plan:
- Viewed various objects, no longer saw colored policy hints.
- Grepped for all removed symbols.
Maniphest Tasks: T13461
Differential Revision: https://secure.phabricator.com/D20918
Summary:
Fixes T13452. We currently give users mixed signals about the interaction mode of this text: the cursor says "text" but the behavior is "grab".
Make the behavior "text" to align with the cursor. An alternate variation of this change is to remove the cursor, but this is preferable if it doesn't cause problems, since copying the task ID is at least somewhat useful.
Test Plan: In Safari, Firefox, and Chrome: selected and copied object names from workboard cards; and dragged workboard cards by other parts of their UI.
Maniphest Tasks: T13452
Differential Revision: https://secure.phabricator.com/D20898
Summary: Ref T13440. Give the table more obvious visual structure and get rid of the largely useless header columns.
Test Plan: Viewed table, saw a slightly cleaner result.
Maniphest Tasks: T13440
Differential Revision: https://secure.phabricator.com/D20885
Summary: Depends on D20883. Ref T13440. In most cases, all changes belong to the same repository, which makes the "Repository" column redundant and visually noisy. Show repository information in a section header.
Test Plan: {F6989932}
Maniphest Tasks: T13440
Differential Revision: https://secure.phabricator.com/D20884
Summary:
Fixes T13437. This URI construction was just missing URI encoding.
Also, trim the symbol because my test case ended up catching "#define\n" as symbol text.
Test Plan:
- Configured a repository to have PHP symbols.
- Touched a ".php" file with "#define" in it.
- Diffed the change.
- Command-clicked "#define" in the UI, in Safari/MacOS, to jump to the definition.
- Before: taken to a nonsense page where "#define" became an anchor.
- After: taken to symbol search for "#define".
Maniphest Tasks: T13437
Differential Revision: https://secure.phabricator.com/D20876
Summary:
Fixes T13435. If you move Phabricator or copy data from one environment to another, the repository URI index currently still references the old URI, since it writes the URI as a plain string. This may make "arc which" and similar workflows have difficulty identifying repositories.
Instead, store the "phabricator.base-uri" domain and the "diffusion.ssh-host" domain as tokens, so lookups continue to work correctly even after these values change.
Test Plan:
- Added unit tests to cover the normalization.
- Ran migration, ran daemons, inspected `repository_uriindex` table, saw a mixture of sensible tokens (for local domains) and static domains (like "github.com").
- Ran this thing:
```
$ echo '{"remoteURIs": ["ssh://git@local.phacility.com/diffusion/P"]}' | ./bin/conduit call --method repository.query --trace --input -
Reading input from stdin...
>>> [2] (+0) <conduit> repository.query()
>>> [3] (+3) <connect> local_repository
<<< [3] (+3) <connect> 555 us
>>> [4] (+5) <query> SELECT `r`.* FROM `repository` `r` LEFT JOIN `local_repository`.`repository_uriindex` uri ON r.phid = uri.repositoryPHID WHERE (uri.repositoryURI IN ('<base-uri>/diffusion/P')) GROUP BY `r`.phid ORDER BY `r`.`id` DESC LIMIT 101
<<< [4] (+5) <query> 596 us
<<< [2] (+6) <conduit> 6,108 us
{
"result": [
{
"id": "1",
"name": "Phabricator",
"phid": "PHID-REPO-2psrynlauicce7d3q7g2",
"callsign": "P",
"monogram": "rP",
"vcs": "git",
"uri": "http://local.phacility.com/source/phabricator/",
"remoteURI": "https://github.com/phacility/phabricator.git",
"description": "asdf",
"isActive": true,
"isHosted": false,
"isImporting": false,
"encoding": "UTF-8",
"staging": {
"supported": true,
"prefix": "phabricator",
"uri": null
}
}
]
}
```
Note the `WHERE` clause in the query normalizes the URI into "<base-uri>", and the lookup succeeds.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13435
Differential Revision: https://secure.phabricator.com/D20872
Summary:
Fixes T13433. Currently, "Login Screen Instructions" in "Auth" are shown only on the main login screen. If you enter a bad password or bad LDAP credential set and move to the flow-specific login failure screen (for example, "invalid password"), the instructions vanish.
Instead, persist them. There are reasonable cases where this is highly useful and the cases which spring to mind where this is possibly misleading are fairly easy to fix by making the instructions more specific.
Test Plan:
- Configured login instructions in "Auth".
- Viewed main login screen, saw instructions.
- Entered a bad username/password and a bad LDAP credential set, got kicked to workflow sub-pages and still saw instructions (previously: no instructions).
- Grepped for other callers to `buildProviderPageResponse()` to look for anything weird, came up empty.
Maniphest Tasks: T13433
Differential Revision: https://secure.phabricator.com/D20863
Summary: Ref T13425. When we render a diff between two source lines, highlight intraline changes.
Test Plan: Viewed a Jupyter notebook with a code diff in it, saw the changed subsequences in the line highlighted.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20851
Summary:
Depends on D20843. Ref T13425. Add very basic support for "Show Hidden Context", in the form of folding it behind an unclickable shield. This isn't ideal, but should be better than nothing.
Prepare for "intraline" diffs on content blocks.
Fix newline handling in Markdown sections in Jupyter notebooks.
Remove the word "visibile" from the codebase.
Test Plan: {F6898192}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20844
Summary:
Ref T13425. Currently, code inputs and all outputs are grouped into a single block. This is fine for display notebooks but not great for diffing notebooks.
Instead, split source code input into individual lines with one line per block, and each output into its own block.
This allows you to leave actual line-by-line inlines on source, and comment on outputs individually.
Test Plan: {F6888583}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20840
Summary:
Depends on D20835. Ref T13425. Ref T13414. When a document has a list of content blocks, we may not be able to diff it directly, but we can hash each block and then diff the hashes (internally "diff" also does approximately the same thing).
We could do this ourselves with slightly fewer layers of indirection, but: diff already exists; we already use it; we already have a bunch of abstractions on top of it; and it's likely much faster on large inputs than the best we can do in PHP.
Test Plan: {F6888169}
Maniphest Tasks: T13425, T13414
Differential Revision: https://secure.phabricator.com/D20836
Summary:
Depends on D20834. Ref T13425. After the change from "th" to "td" for accessibility, the algorithm picks which cells it should highlight slightly improperly (it picks too many cells since it can no longer find the line numbers).
Ideally, it would probably highlight //only// the source content, but there isn't an easy way to do this right now. Settle for an incremental improvement for the moment.
Test Plan: Hovered over line numbers, saw a more accurate highlight area.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20835
Summary:
Depends on D20832. Ref T13425. Emit Jupyter notebooks as diffable blocks with block keys.
No diffing or proper inlines yet.
Test Plan: {F6888058}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20833
Summary:
Depends on D20831. Ref T13425. As an escape hatch to get out of future DocumentEngine rendering behavior, provide a "View As.." option.
Now I can break DocumentEngine real bad and no one can complain.
Test Plan: Used "View As" to swap document engines for image files.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20832
Summary:
Depends on D20830. Ref T13425. Have the image engine elect into block rendering, then emit blocks.
This is rough (the blocks aren't actually diffed yet) but image diffs were already pretty rough so this is approximately a net improvement.
Test Plan: Viewed image diffs, saw nothing worse than before.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20831
Summary:
Fixes T13284. See that task for substantial discussion. There are currently two cases where we'll skip over commits which we should publish:
- if a branch is not permanent, then later made permanent; or
- in some cases, the first time we examine branches in a repository.
In both cases, this error is one-shot and things work correctly going forward. The root cause is conflation between the states "this ref currently permanent" and "this ref was permanent the last time we updated refs".
Separate these pieces of state and cover all these cases. Also introduce a "--rebuild" flag to fix the state of bad commits.
Test Plan:
See T13284 for the three major cases:
- initial import;
- push changes to a nonpermanent branch, update, then make it permanent;
- push chanegs to a nonpermanent branch, update, push more changes, then make it permanent.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13284
Differential Revision: https://secure.phabricator.com/D20829
Summary:
Ref T13410. We currently generate some less-than-ideal anchors in remarkup, but it's hard to change the algorithm without breaking stuff.
To mitigate this, allow `#xyz` to match any target on the page which begins with `xyz`. This means we can make anchors longer with no damage, and savvy users are free to shorten anchors to produce more presentation-friendly links.
Test Plan: Browsed to `#header-th`, was scrolled to `#header-three`, etc.
Maniphest Tasks: T13410
Differential Revision: https://secure.phabricator.com/D20820
Summary: Ref T13279. Fix some tabular stuff, draw areas better, make the "compose()" API more consistent, unfatal the demo chart, unfatal the project burndown, make the project chart do something roughly physical.
Test Plan: Looked at charts, saw fewer obvious horrors.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20817
Summary: Ref T13279. We currently draw a point on the chart for each datapoint, but this leads to many overlapping circles. Instead, aggregate the raw points into display points ("events") at the end.
Test Plan: Viewed a stacked area chart with many points, saw a more palatable number of drawn dots.
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20814
Summary:
Ref T13413. In Chrome 77, workboard cards with titles that must break in the middle of words cause the browser to completely lock up.
Work around the major known instance of this by overriding the "break-word" behavior. This gives us worse rendering for tasks with very long "words" in their titles (they are truncated instead of broken) but fixes the freezing.
Once Chrome is fixed, this can be reverted.
Test Plan:
- Created a task named "MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM" on a workboard.
- Loaded the board in Chrome 77.
- Before: entire page locks up.
- After: smooth sailing, except the "MMMMMM..." is truncated.
Maniphest Tasks: T13413
Differential Revision: https://secure.phabricator.com/D20812
Summary:
Fixes T7961. Currently, we present Herald users with actions like "Require legalpad signatures" and "Run build plans" even if Legalpad and Harbormaster are not installed.
Instead, allow fields and actions to be made "unavailable", which means that we won't present them as options when adding to new or existing rules.
If you edit a rule which already uses one of these fields or actions, it isn't affected.
Test Plan:
- Created a rule with a legalpad action, uninstalled legalpad, edited the rule. Action remained untouched.
- Created a new rule, wasn't offered the legalpad action.
- Reinstalled the application, saw the action again.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T7961
Differential Revision: https://secure.phabricator.com/D20808
Summary: Ref T13411. When users click a link to explain a capability (like the policy header on many objects, or the link next to specific capabilities in "Applications", "Diffusion", etc), inline the full ruleset for the custom policy into the dialog if the object has a custom policy.
Test Plan: {F6856365}
Maniphest Tasks: T13411
Differential Revision: https://secure.phabricator.com/D20805
Summary:
Fixes T13408. Currently, when a package (or other object) appears in a field (rather than an action), it is not indexed.
Instead: index fields too, not just actions.
Test Plan:
- Wrote a rule like "[ Affected packages include ] ...".
- Updated the search index.
- Saw rule appear on "Affected By Herald Rules" on the package detail page.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13408
Differential Revision: https://secure.phabricator.com/D20795
Summary:
Depends on D20732. Ref T13366. This generally makes the "Merchant" UI look and work like the "Payment Account" UI.
This is mostly simpler since the permissions have largely been sorted out already and there's less going on here and less weirdness around view/edit policies.
Test Plan: Browsed all Merchant functions as a merchant member and non-member.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20733
Summary:
Depends on D20720. Ref T13366.
- Use modern policies and policy interfaces.
- Use new merchant authority cache.
- Add (some) transactions.
- Move MFA from pre-upgrade-gate to post-one-shot-check.
- Simplify the autopay workflow.
- Use the "reloading arrows" icon for subscriptions more consistently.
Test Plan: As a merchant-authority and account-authority, viewed, edited, and changed autopay for subscriptions.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20721
Summary:
Depends on D20718. Ref T13366. Ref T13367.
- Phortune payment methods currently do not use transactions; update them.
- Give them a proper view page with a transaction log.
- Add an "Add Payment Method" button which always works.
- Show which subscriptions a payment method is associated with.
- Get rid of the "Active" status indicator since we now treat "disabled" as "removed", to align with user expectation/intent.
- Swap out of some of the super weird div-form-button UI into the new "big, clickable" UI for choice dialogs among a small number of options on a single dimension.
Test Plan:
- As a mechant-authority and account-authority, created payment methods from carts, subscriptions, and accounts. Edited and viewed payment methods.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13367, T13366
Differential Revision: https://secure.phabricator.com/D20719
Summary:
Depends on D20713. Ref T13366. When a payment account establishes a relationship with a merchant by creating a cart or subscription, create an edge to give the merchant access to view the payment account.
Also, migrate all existing subscriptions and carts to write these edges.
This aims at straightening out Phortune permissions, which are currently a bit wonky on a couple of dimensions. See T13366 for detailed discussion.
Test Plan:
- Created and edited carts/subscriptions, saw edges write.
- Ran migrations, saw edges write.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13366
Differential Revision: https://secure.phabricator.com/D20715
Summary: Depends on D20697. Ref T8389. Add support for adding "billing@enterprise.com" and similar to Phortune accounts.
Test Plan: Added and edited email addresses for a payment account.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T8389
Differential Revision: https://secure.phabricator.com/D20713
Summary:
Fixes T8830. Fixes T13364.
- The inability to destroy objects from the web UI is intentional. Make this clear in the messaging, which is somewhat out of date and partly reflects an earlier era when things could be destroyed.
- `bin/remove destroy` can't rewind time. Document expectations around the "put the cat back in the bag" use case.
Test Plan: Read documentation, clicked through both workflows.
Maniphest Tasks: T13364, T8830
Differential Revision: https://secure.phabricator.com/D20694
Summary:
Fixes T13363. Currently, these are genuine links which we intercept events for.
Make them pseudolinks instead. Possible alternative approaches are:
- Keep them as genuine links, but mark them as non-navigation links for Quicksand. (But: yuck, weird special case.)
- Keep them as genuine links, and have the dialog handler `JX.Stratcom.pass()` to see if anything handles the event. (But: the "pass()" pattern generally feels bad.)
"Tableaus" or whatever comes out of T10469 some day will probably break everything anyway?
Test Plan:
- Opened the "Edit Related Tasks... > Edit Subtasks" dialog.
- Clicked task title links (not the "open in new window" icon, and not the "Select" button).
- Before: Dialog (sometimes) closed abruptly.
- After: Task is consistently selected as part of the attachment set.
Maniphest Tasks: T13363
Differential Revision: https://secure.phabricator.com/D20693
Summary:
Ref T4900. When a card is edited, we currently emit an update notification for all the projects the task is tagged with. This isn't quite the right set:
- We want to emit notifications for projects the task //was previously// tagged with, so it can be removed from boards it should no longer be part of.
- We want to emit notifications for ancestors of projects the task is or was tagged with, so parent project boards can be updated.
- However, we don't need to emit notifications for projects that don't actually have workboards.
Adjust the notification set to align better to these rules.
Test Plan:
- Removal of Parent Project: Edited a task on board "A > B", removing the "B" project tag. Saw board A update in another window.
- Normal Update: Edited a task title on board X, saw board X update in another window.
- Used `bin/aphlict debug` to inspect the notification set, saw generally sensible-seeming data going over the wire.
Reviewers: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20680
Summary:
See D20650. Long ago, this got added as "pastebin", but that's the name of another product/company, not a generic term for paste storage.
Rename the database to `phabricator_paste`.
(An alternate version of this patch would rename `phabricator_search` to `phabricator_bing`, `phabricator_countdown` to `phabricator_spacex`, `phabricator_pholio` to `phabricator_adobe_photoshop`, etc.)
Test Plan:
- Grepped for `pastebin`, now only found references in old patches.
- Applied patches.
- Browsed around Paste in the UI without encountering issues.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20661
Summary:
Depends on D20654. Ref T4900. When a task is edited, emit a "workboards" event for all boards it appears on (in a future change, this should also include all boards it //previously// appeared on, and all parents of both sets of boards -- but I'm just getting things working for now).
When we receive a "workboards" event, check if the visible board should be updated.
Aphlict has a complicated intra-window leader/follower election system which could let us process this update event exactly once no matter how many windows a user has open with the same workboard. I'm not trying to do any of this since it seems fairly rare. It makes sense for events like "you have new notifications" where we don't want to generate 100 Ajax calls if the user has 100 windows open, but very few users seem likely to have 100 copies of the same workboard open.
Test Plan:
- Ran `bin/aphlict debug`.
- Opened workboard A in two windows, X and Y.
- Edited and moved tasks in window X.
- Saw "workboards" messages in the Aphlict log.
- Saw window Y update in nearly-real-time (locally, this is fast enough that it feels instantaneous).
Then:
- Stopped the Aphlcit server.
- Edited a task.
- Started the Aphlict server.
- Saw window Y update after a few moments (i.e., update in response to a reconnect).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20656
Summary:
Depends on D20653. Ref T4900. Pass ordering details to the reload endpoint so it can give the client accurate ordering/header information in the response.
The removed comment mentions this, but here's why this is a difficult mess:
- In window A, view a board with "Group by: Owner" and no tasks owned by "Alice". Since "Alice" owns no tasks, this means the columns do not have an "Assigned to: Alice" header!
- In window B, edit task T and assign it to Alice.
- In window A, press "R".
Window A now not only needs to update to properly reflect the state of task T, it actually needs to draw a new "Assigned to: Alice" header in every column.
Fortunately, the "group by" code anticipates this being a big mess, is fairly careful about handling it, and the client can handle this state change and the actual code change here isn't too involved. This is just causing a lot of not-very-obvious indirect effects in the pipeline to handle these situations that need complex redraws.
Test Plan:
- After making various normal edits/creates/moves in window A, pressed "R" in window B. Saw ordering reflected correctly after sync.
- Went through the whole "Group by: Owner" + assign to unrepresented owner flow above. After pressing "R", saw "Assigned to: Alice" appear on the board.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20654
Summary:
Depends on D20652. Ref T4900. When the user presses "R", send a list of cards currently visible on the client and their version numbers.
On the server:
- Compare the client verisons to the server versions so we can skip updates for objects which have not changed. (For now, the client version is always "1" and the server version is always "2", so this doesn't do anything meaningful, and every card is always updated.)
- Compare the client visible set to the server visible set and "remove" any cards which have been removed from the board.
I believe this means that "R" always puts the board into the right state (except for some issues with client orderings not being fully handled yet). It's not tremendously efficient, but we can make versioning better (using the largest object transaction ID) to improve that and loading the page in the first place doesn't take all that long so even sending down the full visible set shouldn't be a huge problem.
Test Plan:
- In window A, removed a card from a board.
- In window B, pressed "R" and saw the removal reflected on the client.
- (Also added cards, edited cards, etc., and didn't catch anything exploding.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20653
Summary:
Depends on D20639. Ref T4900. Currently, "BoardResponseEngine" has a `setObjectPHID()` method. This is called after edit operations to mean "we just edited object X, so we know it needs to be updated".
Move toward `setUpdatePHIDs(...)` in all cases, with `setUpdatePHIDs(array(the-object-we-just-edited))` as a special case of that. After this change, callers pass:
- An optional list of PHIDs they know need to be updated on the client. Today, this is always be a card we just edited (on edit/move flows), or a sort of made-up list of PHIDs for the moment (when you press "R"). In the future, the "R" endpoint will do a better job of figuring out a more realistic update set.
- An optional list of PHIDs currently visible on the client. This is used to update ordering details and mark cards for removal. This is currently passed by edit/move, but not by pressing "R" (it will be in the future).
- An optional list of objects. The "R" workflow has to load these anyway, so we can save a couple queries by letting callers pass them. For now, the edit/move flows still rely on the engine to figure out what it needs to load.
This does very little to actually change client behavior, it mostly just paves the way for the next update to the "R" workflow to make it handle add/remove cases properly.
Test Plan:
- Edited and moved cards on a workboard.
- Pressed "R" to reload a workboard.
Neither of these operations seem any worse off than they were before. They still don't fully work:
- When you edit a card and delete the current workboard project from it, it remains visible. This is also the behavior on `master`. This is sort of intentional since we don't necessarily want to make these cards suddenly disappear? Ideally, we would probably have some kind of "tombstone" state where the card can still be edited but can't be dragged, and the next explicit user interaction would clean up old tombstones. This interaction is very rare and I don't think it's particularly important to specialize.
- When a card is removed from the board, "R" can't currently figure out that it should be removed from the client. This is because the client does not yet pass a "visiblePHIDs" state. It will in an upcoming change.
- The "R" flow always sends a full set of card updates, and can not yet detect that some cards have not changed.
- There's a TODO, but some ordering stuff isn't handled yet.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20652
Summary:
Depends on D20638. Ref T4900. This is an incremental step toward proper workboard updates.
Currently, the client can mostly update its view because we do updates when you edit or move a card, and the client and server know how to send lists of card updates, so a lot of the work is already done.
However, the code assumes we're only updating/redrawing one card at a time. Make the client accept and process multiple card updates.
In future changes, I'll add versioning (so we only update cards that have actually changed), fix the "TODO" around ordering, and move toward actual Aphlict-based real-time updates.
Test Plan:
- Opened the same workboard in two windows.
- Edited cards in one window, pressed "R" (capital letter, with no modifier keys) to reload the second window.
- Saw edits and moves reflected accurately after sync, except for some special cases of header/order interaction (see "TODO").
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20639
Summary:
Ref T13302. The "Close/Cancel" button is currently running two copies of the "dismiss dialog" code, since it's techncally a link with a valid HREF attribute.
An alternate formulation of this is perhaps `if (JX.Stratcom.pass()) { return; }` ("let other handlers react to this event; if something kills it, stop processing"), but `pass()` is inherently someone spooky/fragile so try to get away without it.
Test Plan: Opened the Javascript console, clicked "Edit Task" on a workboard, clicked "Close" on the dialog. Before: event was double-handled leading to a JS error in the console. After: dialog closes uneventfully.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13302
Differential Revision: https://secure.phabricator.com/D20640
Summary: Depends on D20637. Ref T4900. This is some ancient dead code that nothing uses.
Test Plan: Grepped for `updateCard()` to verify it's private. Searched for "options" and "dirtyColumn" and got no hits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D20638
Summary:
Ref T13302. In at least some browsers (including Safari and Chrome), when you write this:
```
<a href="#">...</a>
```
...and then access `<that node>.href`, you get `http://local-domain-whatever.com/path/to/current/page#` back.
This is wonderful, but not what we want. Access the raw attribute value instead, which is `#` in all browsers.
Test Plan:
- In Safari, Chrome, and Firefox:
- Clicked "Edit Subtasks" from a task.
- Clicked "Select" buttons to select several tasks.
- Before: Clicking these button incorrectly closed the dialog (because of D20573).
- After: Clicking these buttons now selects tasks without closing the dialog.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13302
Differential Revision: https://secure.phabricator.com/D20590
Summary:
Ref T13302. Currently, if you enable Quicksand (by clicking "Persistent Chat"), open a dialog with links in it (like "Create Subtask" with multiple available subtypes), and then follow a navigation link, the page content reloads behind the dialog but the dialog stays in the foreground.
Fix this by closing dialogs when users click navigation links inside them.
Test Plan:
With Quicksand enabled and disabled, clicked a subtask type in the "Create Subtask" dialog.
- Before, Quicksand Disabled: Dialog stays on screen, then navigation occurs.
- After, Quicksand Disabled: Dialog vanishes, then navigation occurs.
- Before, Quicksand Enabled: Dialog stays on screen, navigation occurs behind it.
- After, Quicksand Enabled: Dialog vanishes, then navigation occurs.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13302
Differential Revision: https://secure.phabricator.com/D20573
Summary:
Ref T13305. See that task for discussion.
This old migration may indirectly cause search index worker tasks to queue by loading handles. They'll fail since we later added `dateCreated` to the worker task table.
Use `needHandles(false)` (since we don't use them) to disable loading handles and avoid the problem.
Test Plan:
- Ran `bin/storage upgrade -f` on an older instance (late 2016) and hit this issue.
- Applied the patch, got a clean migration to modernity.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13305
Differential Revision: https://secure.phabricator.com/D20570
Summary:
Ref PHI1275. Previously, see T591. See also T7963. Headers are currently very visually similar to one another, and similar to the text size:
{F6485441}
I think the design intent was to make it hard to make bad-looking documents, but all the headers end up being very samey.
Differentiate the sizes of the headers better so they're much more obvious (e.g., when scrolling through a document) and the different levels are more distinct.
This might be a little overboard, but we can always pull it back a bit if it's too much, and I think giving users more control in Remarkup (in cases where it doesn't create some weird syntax/parsing nightmare) is generally a good thing.
Test Plan: {F6485447}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20569
Summary: Ref T11741. See PHI1276. After the switch to "Ferret", this table has no remaining readers or writers.
Test Plan:
- Ran `bin/storage upgrade -f`, no warnings.
- Grepped for class name, table name, `stemmedCorpus` column; got no relevant hits.
- Did a fulltext search.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11741
Differential Revision: https://secure.phabricator.com/D20549
Summary: Ref T13279. Makes charts incrementally more useful by allowing the server to provide labels and colors for functions.
Test Plan: {F6438872}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20501
Summary:
Ref T13279. Adds client-side support for rendering function labels on charts, then labels every function as important data.
Works okay on mobile, although I'm not planning to target mobile terribly heavily for v0.
Test Plan: {F6438860}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20500
Summary:
Ref T13279. This adds support for:
- Datasets can have types, like "stacked area".
- Datasets can have multiple functions.
- Charts can store dataset types and datasets with multiple functions.
- Adds a "stacked area" dataset.
- Makes D3 actually draw a stacked area chart.
Lots of rough edges here still, but the result looks slightly more like it's supposed to look.
D3 can do some of this logic itself, like adding up the area stacks on top of one another with `d3.stack()`. I'm doing it in PHP instead because I think it's a bit easier to debug, and it gives us more options for things like caching or "export to CSV" or "export to API" or rendering a data table under the chart or whatever.
Test Plan: {F6427780}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20498
Summary:
Ref T13279. Old D3 seems perfectly fine, but most of the good references seem to have been written by people who update D3 more than once every 10 years (???).
This requires some minor API changes, see next diff.
Test Plan: See next diff.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20497
Summary: Depends on D20486. Ref T13279. Now that the "Reports" UI uses a panel to draw a real chart from Facts, throw away the copy of the old code.
Test Plan: `grep`
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20487
Summary:
Depends on D20475. Ref T13272. Currently, if you `JX.Request` with `data` like `{x: null}`, we submit that as `?x=null`, i.e. as though `null` was the string `"null"`.
This is weird and almost certainly never intended/desiarable. In particular, it causes a bug where panels embedded inside tab panels are incorrectly draggable.
It's possible this breaks something which relied on the buggy behavior, but that seems unlikely.
Test Plan: Tried to drag a panel inside a tab panel, it really truly didn't work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20476
Summary:
This hasn't been updated in a bit more than a year (last updated in D18594) and we've accumulated a fair number of SQL patches. Update it.
This is mostly automatic (with `bin/storage quickstart`), except:
- Manual edit to one migration for a missed callsite to `DashboardInstall`.
- Replaced two InnoDB tables that still have FULLTEXT indexes with MyISAM (see rP6cedd4a95cfc).
This is not really possible to review and more for reference than examination. `bin/storage quickstart` has historically worked correctly.
Test Plan: I have great faith that `bin/storage quickstart` is a script which creates a big `.sql` file.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20480
Summary:
Ref T13279. Charting changes alter how the "line-chart" behavior works, but the "Burnup Chart" still relies on the old behavior.
Although I'm intending to remove "Maniphest > Reports" once Facts is a minimally sufficient replacement, copy this behavior to keep it working until we're ready to pull the trigger.
Also fix a leftover typo from D20435.
Test Plan: Viewed a legacy Maniphest burnup rate report.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20449
Summary:
Depends on D20439. Ref T13279. Some day, charts will probably need to reload themselves or do a bunch of defer/request-shaping magic when they're on a dashboard with 900 other charts.
Give the controller separate "HTML placeholder" and "actual data" modes, and make the placeholder fetch the data in a separate request.
Then, make the chart redraw if you resize the window instead of staying at whatever size it started as.
Test Plan:
- Loaded a chart, saw it load data asynchronously.
- Resized the window, saw the chart resize.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20440
Summary:
Ref T13279. I think I'm going to fling some stuff at the wall for a bit here and hope most of it sticks, so this series of changes may not be terribly cohesive or focused. Here:
The range of the chart is locked to "[0, 105% of max]". This is trying to make a pleasing extra margin above the maximum value, but currently just breaks charts with negative values. Later:
- I'll probably let users customize this.
- We should likely select 0 as the automatic minimum for charts with no negative values.
- For charts with positive values, it would be nice to automatically pick a pleasantly round number (25, 100, 1000) as a maximum by default.
We don't have any storage for charts yet. Add some. This works like queries, where every possible configuration gets a short URL slug. Nothing writes or reads this yet.
Rename `fn()` to `css_function()`. This builds CSS functions for D3. The JS is likely to get substantial structural rewrites later on, `fn()` was just particularly offensive.
Test Plan: Viewed a fact series with negative values. Ran `bin/storage upgrade`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13279
Differential Revision: https://secure.phabricator.com/D20438
Summary:
Depends on D20416. Ref T13269. See D20329.
If you try to save an "Assign to" rule with no assignee, we currently replace the control with an "InvalidRule" control that isn't editable. We'd prefer to give you an empty field back and let you pick a different value.
Differentiate between "bad record format" (i.e., we can't really do anything with this) and "bad record value" (i.e., everything is structurally fine, you just typed the wrong thing). In the latter case, we still build a properly typed rule for the UI, we just refuse to update storage until you fix the problem.
Test Plan:
First, hit the original issue and got a nicer UI with a more consistent control width (note full-width error):
{F6374205}
Then, applied the rest of the patch and got a normal "fix the issue" form state instead of a dead-end:
{F6374211}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20417
Summary:
Ref T13269. See D20329. When we switch trigger rule control types, reset the rule value.
Also, pick slightly nicer defaults for status/priority.
Test Plan:
- Created a "Change Status To: X" rule.
- Saved it.
- Edited it.
- Selected "Assign to" for the existing action's dropdown.
- Before: tokenizer filled with nonsense.
- After: tokenizer cleared.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20416
Summary:
Depends on D20414. Ref T13272. Several minor things here:
- Currently, you can drag panels underneath the invisible "there are no items in this column" div and the "Create Panel / Add Existing Panel" buttons. This is silly; stop it.
- Currently, when viewing a tab panel on a dashboard, you can drag the panels inside it. This is extremely silly. Make "movable" off by default and pass it through the async flow only when we actually need it.
- Make the whole "Add Tab..." virtual tab clickable to open the dropdown. This removes the rare exception/todo combo I added earlier. {key F}
- Add or remove some icons or something.
Test Plan: Moved panels around on dashboards. Tried to drag panels inside tab panels. Added tab. Things were less obviously broken.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20415
Summary:
Depends on D20412. See PHI1147.
- Index the targets of "Add Reviewer", "Add Blocking Reviewer", "Add Auditor", "Add Subscriber", and "Remove Subscriber" Herald rules. My major goal is to get Owners packages. This will also hit projects/users, but we just don't read those edges (for now, at least).
- Add a "Related Herald Rules" panel to Owners Package pages.
- Add a migration to reindex Herald rules for the recent build plan stuff and this, now that such a migration is easy to write.
Test Plan:
Ran migration, verified all rules reindexed.
{F6372695}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20413
Summary:
Depends on D20411. Ref T13272. Dashboards and panels have new indexes (Ferret and usage edges) that need a rebuild.
For large datasets like commits we have the "activity" flow in T11932, but realistically these rebuilds won't take more than a few minutes on any realistic install so we should be able to just queue them up as migrations.
Let migrations insert a job to basically run `bin/search index --type SomeObjectType`, then do that for dashboards and panels.
(I'll do Herald rules in a followup too, but I want to tweak one indexing thing there.)
Test Plan: Ran the migration, ran `bin/phd debug task`, saw everything get indexed with no manual intervention.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20412
Summary:
Ref T7667. On the road to locking the auth config, also clean up some minor UI issues:
* Only show the warning about not Phacility instance auth if the user isn't a manager (see next diff).
* When rendering more than one warning in the guidance, add bullets.
* I didn't like the text in the `auth.config-lock` config setting.
Test Plan: Loaded the page, saw more reasonable-looking guidance: {F6369405}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7667
Differential Revision: https://secure.phabricator.com/D20400
Summary:
Depends on D20410. Ref T13272. Dashboards/Panels currently use older "ngram" indexing, which is a less-powerful precursor to Ferret. Throw away the ngram index and provide a Ferret index instead. Also:
- Remove the NUX state, which links to the wrong place now and doesn't seem terribly important.
- Add project tags to the search result list.
- Make the "No Tags" tag a little less conspicious.
Test Plan:
- Indexed dashboards and panels.
- Searched for dashboards and panels via SearchEngine using Ferret "query" field.
- Searched for panels via "Add Existing Panel" datasource typeahead.
- Searched for dashboards via "Add Menu Item > Dashboard" on a ProfileMenu via typeahead.
- Viewed dashboard NUX state (no special state, but no more bad link to "/create/").
- Viewed dashboard list, saw project tags.
- Viewed dashboards with no project tags ("No Tags" is now displayed but less visible).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20411
Summary: Depends on D20409. Ref T13272. Before "ProfileMenu", dashboards were installed on specific objects using this table. Installs are now handled via ProfileMenu and this table no longer has any meaningful readers. Remove references to the table and destroy it.
Test Plan: Grepped for `DashboardInstall`.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20410
Summary: Depends on D20408. Ref T13272. The actual JS is still a little bit iffy, but this makes the server side "move" operation work correctly by updating it to use the same code as everything else.
Test Plan: Moved panels around on single-column and multi-column dashboards, saw them move to reasonable places and stay there when I reloaded the page.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20409
Summary:
Depends on D20407. Ref T13272. This updates the "add panel" (which has two flavors: "add existing" and "create new") and "remove panel" flows to work with the new duplicate-friendly storage format.
- We now modify panels by "panelKey", not by panel PHID, so one dashboard may have multiple copies of the same panel and we can still figure out what's going on.
- We now work with "contextPHID", not "dashboardID", to make some flows with tab panels (or other nested panels in the future) easier.
The only major remaining flow is the Javascript "move panels around with drag-and-drop" flow.
Test Plan:
- Added panels to a dashboard with "Create New Panel".
- Added panels to a dashboard with "Add Existing Panel".
- Removed panels from a dashboard.
- Added and removed duplicate panels, got a correctly-functioning dashboard that didn't care about duplicates.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20408
Summary:
Ref T13272. See PHI945. Currently, dashboards tend to break when they have duplicate panels. Partly, this is because all the edit operations operate on a "panelPHID", so there's no way to say "remove the copy of panel X at the bottom of the right-hand column", since the operation is `remove(phid)` and that doesn't point at a specific copy of that panel.
In theory, the code is supposed to prevent duplicate panels, but (a) it doesn't always do this successfully and (b) there's no real reason you can't put duplicate panels on a dashboard if you want. There may even be good reason to do this if you have a "random cat picture" panel or something. Even if you aren't doing this on purpose, it's probably better to let you do it and then fix your mistake by removing the panel you don't want than to prevent the operation entirely.
To simplify this whole mess, I want to just support putting the same panel into multiple places on a dashboard. As a first step, change the storage format so each instance of a panel has a unique "panelKey".
Since each instance of each panel now has its own object, this will also let us give particular instances of panels things like "automatic refresh time" (T5514) or "custom name for this panel on this dashboard" later, if we want. Not clear these are valuable but having this capability can't hurt.
Test Plan:
- `var_dump()`'d the migration, looked at all the results.
- Ran the migration.
NOTE: This breaks dashboards on its own since none of the other code has been changed yet, see followups.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20405
Summary:
Depends on D20398. Ref T13272. Fixes T6018. Previously, panels showed "used on dashboards: x, y", but this did not include cases where a panel was used by another container panel (today, a tab panel).
Do edge indexing when a dashboard or panel is saved, then pull the edges on the Panel page so we can provide a full list of uses.
Test Plan: {F6369289}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272, T6018
Differential Revision: https://secure.phabricator.com/D20399
Summary:
Depends on D20397. Ref T13272. Similar to the recent "where are Herald rules used" stuff, show which menus Dashboards are installed in.
This is mostly straightforward, except that I pulled some of the Herald logic into a parent class so it could be shared.
Test Plan: {F6369164}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20398
Summary:
Depends on D20396. Ref T13272. Currently, using the dropdowns to edit a tab panel from a dashboard redirects you to the tab panel page.
Instead, redirect back to the context page (usually, a dashboard -- but theoretically a containing tab panel, since you can put tab panels inside tab panels).
Also, fix some JS issues with non-integer panel keys. I've moved panel keys from "0, 1, 2, ..." to having arbitrary keys to make some operations less flimsy/error-prone, but this needs some JS tweaks.
Test Plan: Edited a tab panel from a dashboard, got sent sensibly back to the dashboard.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20397
Summary:
Ref T13272. In edit mode, tab panels now have a dropdown menu. However, this sort of overrlaps with the actual action of clicking the tab to select it.
Separate these into different click targets so that "select tab X" and "open dropdown menu for X" are different operations.
This is more work than it appears because:
- We have an "action icon" already, used when you put a dashboard on a portal/home to create an "Edit" link. It makes sense to attach dropdowns to this, but it has some hard-coded stuff.
- In applications with a "Create <thing>" in the crumbs (like Maniphest), we may use a dropdown menu if there are multiple create forms available. However, this menu renders in a weird way by reading all the properties out of an actual "View" object and building something else.
- The "list of tabs" stuff shares code with different "list of tabs" navigation used by Diffusion and Instances.
..but I think I fixed everything and didn't break anything.
Test Plan:
- Clicked "select tab" and "open dropdown menu" as separate actions.
- Viewed Diffusion, Maniphest with multiple create forms, Instances.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20396
Summary:
Ref T13275. Add portals to the search index so that:
- they show up in fulltext global search; and
- the typeahead actually uses an index.
Also make them taggable with projects as an organizational aid.
Test Plan: Indexed portals with `bin/serach index`, searched for a portal with "Query", with fulltext search in main menu, with typehead on "Install Dashboard...", changed the name of a portal and searched again to check that the index updates properly.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20389
Summary:
Ref T13263.
- Make the user profile section of the "Profile" dropdown menu have a transparent background, not a white background. This is a pre-existing issue. This is normally hard to see, but visible on Workboards with custom background colors.
- Fix an alignment issue with the little "V" caret in the search scope dropdown. This is a recent issue caused by some tab-caret CSS I added recently for tabbed dashboard panels.
Test Plan:
Before:
{F6367723}
After:
{F6367724}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13263
Differential Revision: https://secure.phabricator.com/D20388
Summary:
Depends on D20383. Ref T13272. Fixes T12363. See PHI997. This gets the edit flows for tab panels functional again. They aren't //nice//, and a lot of the workflows are fairly janky: for example, most of them end up with you on the tab panel's page, which isn't useful if you started on a dashboard page.
However, these flows were extremely janky before anyway (see T12363) and I suspect this is a net improvement even though it's a bit of a mess. I anticipate cleaning this up bit-by-bit in future diffs.
Test Plan: {F6366372}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272, T12363
Differential Revision: https://secure.phabricator.com/D20384
Summary:
Depends on D20382. Ref T13272. When something near the edge of the screen has a dropdown menu, we currently may render the menu offscreen.
Instead, keep the menu onscreen.
(This is happening because I'm adding dropdown menus to tab query panels.)
Test Plan:
Before:
{F6363339}
After:
{F6363340}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20383
Summary:
Depends on D20372. Ref T13272.
- There's a very heavy dropshadow on panels right now that looks out of place. Reduce it a bit.
- Panels currently have unlabeled pencil and trash icons. Turn this into a menu. I'm likely planning to add options like "Change Query..." to this menu to make managing some types of panels easier.
Test Plan: {F6332838}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20373
Summary:
Depends on D20362. Ref T13272. Currently, Dashboards have an "Install Dashboard" flow which is pretty janky and only allows you to install things to the home page.
Instead, allow users to install things to any valid target (home, favorites, portals, projects). This also provides URIs like `dashboard/install/1/home/personal/` which allow you to link users to an "install a dashboard" page; this may or may not get used.
Test Plan: Installed dashboards on home, favorites, projects, and portals.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13272
Differential Revision: https://secure.phabricator.com/D20364
Summary:
See <https://discourse.phabricator-community.org/t/non-functional-actions-menu-on-live-phame-views/2593>. Several layers here:
The "Actions" button is broken because a menu behavior is failing, since we aren't rendering the menu.
When a behavior fails to initialize, catch and log the exception and continue. Previously, we stopped initializing behaviors if any failed, but behaviors are usually independent and continuing with an explicit exception seems reasonable.
Give "JX.log()" some "sprintf()" semantics to make logging the behavior failure easier. We can probably afford these extra 200 bytes now in 2019.
This fixes the button and gives us explicit errors in the log. So far, so good.
Then, when a page won't render chrome, don't try to render the main menu. This fixes the actual errors (we no longer try to initialize menu behaviors for nodes which don't exist).
Completely hide the "Actions" and "Comment" flows if the viewer isn't logged in. Although this isn't completely consistent with other applications, I think it's more appropriate for Phame. In applications like Maniphest, we show a full set of controls (but disable them) so that users who are not currently logged in have a clear path to interact with the content, under the assumption that this is a relatively common workflow. This is probably less common for Phame, where we expect most anonymous viewers not to log in or interact.
Finally, parametrize a one-off border color and add a border under the crumbs at the top of the page.
Test Plan:
- Viewed a "Live" Phame blog post page, clicked "Actions", got a dropdown.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20378
Summary:
Depends on D20353. Ref T13275. This is just some small quality-of-life fixes:
- When you add items to menus, they currently go below the "Edit Menu/Manage Menu" links by default. This isn't a very good place for them. Instead, lock "edit" items to the bottom of the menu.
- Lock profile pictures to the top of the menu. This just simplifies things a little.
- Show more iconography hints on the "edit menu items" UI.
- Add a "drag stuff to do things" hint if some stuff can be dragged.
Test Plan:
- Added new items to a Portal, they didn't go to the very bottom. Instead, they went above the "Edit/Manage" links; a sensible place for them.
- Viewed the "edit menu items" screen, saw more hints and visual richness.
- Viewed/edited Home, Projects, Portals, Favorites
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20355
Summary:
Ref T13275. Today, you can build a custom page on the home page, on project pages, and in your favorites menu.
PHI374 would approximately like to build a completely standalone custom page, and this generally seems like a reasonable capability which we should support, and which should be easy to support if the "custom menu" stuff is built right.
In the near future, I'm planning to shore up some of the outstanding issues with profile menus and then build charts (which will have a big dashboard/panel component), so adding Portals now should let me double up on a lot of the testing and maybe make some of it a bit easier.
Test Plan:
Viewed the list of portals, created a new portal. Everything is currently a pure skeleton with no unique behavior.
Here's a glorious portal page:
{F6321846}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13275
Differential Revision: https://secure.phabricator.com/D20348
Summary:
See PHI1185, which reports a performance issue with "(" in remarkup in certain contexts.
I can't reproduce the performance issue, but I can reproduce the autosuggester incorrectly remaining active and swallowing return characters.
When the user types `(` or `[`, we wait for a prefix for the `((` (Phurl) or `[[` (Phriction) rules. We currently continue looking for that prefix until a character is entered that explicitly interrupts the search.
For example, typing `(xxx<return>` does not insert a return character, because we're stuck on matching the prefix.
Instead, as soon as the user has entered text that we know won't ever match the prefix, deactivate the autocomplete. We can slightly cheat through this by just looking for at least one character of text, since all prefixes are exactly one character long. If we eventually have some kind of `~~@(xyz)` rule we might need to add a more complicated piece of rejection logic.
Test Plan: Typed `(xxx<return>`, got a return. Used `((` and `[[` autosuggest rules normally. Used `JX.log()` to sanity check that nothing too crazy seems to be happening.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20365
Summary: Depends on D20345. Use a narrower layout for very large graphs to save some space.
Test Plan:
Before:
{F6320215}
After:
{F6320216}
This does not affect smaller graphs.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20346
Summary:
See downstream <https://phabricator.wikimedia.org/T171648>. The `T123 Task Name` column in graphs can currently fold down to 0 pixels wide.
Although it's visually nice to render this element without a scroll bar when we don't really need one, the current behavior is excessive and not very useful.
Instead, tweak the CSS so:
- This cell is always at least 320px wide.
- After 320px, we'll overflow/ellipsis the cell on small screens.
This generally gives us better behavior:
- Small screens get a scrollbar to see a reasonable amount of content.
- The UI doesn't turn into a total mess if one task has a whole novel of text.
Test Plan:
Old behavior, note that there's no scrollbar and the cell is so narrow it is useless:
{F6320208}
New behavior, same default view, has a scrollbar:
{F6320209}
Scrolling over gives you this:
{F6320210}
On a wider screen (this wide or better), we don't need to scroll:
{F6320211}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20345
Summary:
Fixes T13273. This element is a bit weird, but I think I fixed it without breaking anything.
The CSS is used by project hovercards and user hovercards, but they each have a class which builds mostly-shared-but-not-really-identical CSS, instead of having a single `View` class with modes. So I'm not 100% sure I didn't break something obscure, but I couldn't find anything this breaks.
The major issue is that all the text content has "position: absolute". Instead, make the image "absolute" and the text actual positioned content. Then fix all the margins/padding/spacing/layout and add overflow. Seems to work?
Plus: hide availability for disabled users, for consistency with D20342.
Test Plan:
Before:
{F6320155}
After:
{F6320156}
I think this is pixel-exact except for the overflow behavior.
Also:
- Viewed some other user hovercards, including a disabled user. They all looked unchanged.
- Viewed some project hovercards. They all looked good, too.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13273
Differential Revision: https://secure.phabricator.com/D20344
Summary:
See downstream <https://phabricator.wikimedia.org/T201480>. Searching for things on mobile is a significant challenge because clicking the "Magnifying Glass" icon shows and then immediately hides the menu. I believe some aspect of iOS event handling has changed since this was originally written.
At some point, I'd like to rewrite this to work more cleanly and get rid of `jx-toggle-class`. In particular, it isn't smart enough to know that it should be modal with other menus, so you can get states like this by clicking multiple things:
{F6320110}
This would also probably just look and work better if it was an inline element that showed up under the header instead of a floating dropdown element.
However, I'm having a hard time getting the Safari debugger to actually connect to the iOS simulator, so take a small step toward this bright future and fix the immediate problem for now: toggle on click instead of mousedown/touchstart.
This means the menu opens ~100ms later, but actually works. Big improvement!
I'd like to move away from "jx-toggle-class" anyway (it usually isn't sophisticated enough to fully describe a behavior) so reducing complexity here seems good. It isn't used in //too// many places so this is unlikely to have any negative effects, I hope.
Test Plan: On iOS simulator, clicked the magnifying glass icon in the main menu to get a search input. Before: got a search input for a microsecond. After: actually got a search input.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20343
Summary: Ref T13269. Make it visually more clear that the "Trigger" and "New Task / Edit / Bulk" dropdown menu items are buttons, not status icons or indicators of some kind.
Test Plan: {F6313872}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20332
Summary: Ref T13269. I refactored this late in the game to organize things better and add table cells around stuff, and accidentally broke the relationship between the "Rule Type" selector and the value selector.
Test Plan: Switched rule type selector from "Change Status" to "Play Sound", saw secondary control update properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13269
Differential Revision: https://secure.phabricator.com/D20326
Summary:
Depends on D20321. Fixes T12175. Ref T13074. Now that before/after PHIDs are suggestions, we can give the server a more complete view of what the client is trying to do so we're more likely to get a good outcome if the client view is out of date.
Instead of passing only the one directly adjacent card PHID, pass all the card PHIDs that the client thinks are in the same group.
(For gigantic columns with tens of thousands of tasks this might need some tweaking -- like, slice both lists down to 10 items -- but we can cross that bridge when we come to it.)
Test Plan:
- Dragged some cards around to top/bottom/middle positions, saw good positioning in all cases.
- In two windows, dragged stuff around on the same board. At least at first glance, conflicting simultaneous edits seemed to do reasonable things.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074, T12175
Differential Revision: https://secure.phabricator.com/D20322
Summary:
Depends on D20320. Ref T12175. Ref T13074. Currently, when you move a card between columns, the internal transaction takes exactly one `afterPHID` or `beforePHID` and moves the card before or after the specified card.
This is a fairly strict interpretation and causes a number of practical issues, mostly because the user/client view of the board may be out of date and the card they're dragging before or after may no longer exist: another user might have moved or hidden it between the last client update and the current time.
In T13074, we also run into a more subtle issue where a card that incorrectly appears in multiple columns fatals when dropped before or after itself.
In all cases, a better behavior is just to complete the move and accept that the position may not end up exactly like the user specified. We could prompt the user instead:
> You tried to drop this card after card X, but that card has moved since you last loaded the board. Reload the board and try again.
...but this is pretty hostile and probably rarely/never what the user wants.
Instead, accept a list of before/after PHIDs and just try them until we find one that works, or accept a default position if none work. In essentially all cases, this means that the move "just works" like users expect it to instead of fataling in a confusing/disruptive/undesirable (but "technically correct") way.
(A followup will make the client JS send more beforePHIDs/afterPHIDs so this works more often.)
We could eventually add a "strict" mode in the API or something if there's some bot/API use case for precise behavior here, but I suspect none exist today or are (ever?) likely to exist in the future.
Test Plan:
- (T13074) Inserted two conflicting rows to put a card on two columns on the same board. Dropped one version of it underneath the other version. Before: confusing fatal. After: cards merge sensibly into one consistent card.
- (T12175) Opened two views of a board. Moved card A to a different column on the first view. On the second view, dropped card B under card A (still showing in the old column). Before: confusing fatal. After: card ended up in the right column in approximately the right place, very reasonably.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074, T12175
Differential Revision: https://secure.phabricator.com/D20321
Summary:
Depends on D20308. Ref T5474. The element which previews what will happen when you drop a task somewhere can cover the bottom part of the rightmost column on a workboard.
To fix this, I'm trying to just fade it out if you put your cursor over it. I tried to do this in a simple way previously (":hover" + "opacity: 0.25") but it doesn't actually work because "pointer-events: none" stops ":hover" from working.
Instead, do this in Javascript. This is a little more complicated but: it works; and we can do the fade when you get //near// the element instead of actually over it, which feels a little better.
Test Plan:
- Shrank window to fairly small size so that the preview could cover up stuff on the workboard.
- Dragged a card toward the rightmost column.
- Before: drop action preview covered some workboard stuff.
- After: preview faded out as my cursor approached.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20320
Summary:
In some cases, we show a limited number of one type of object somewhere else, like "Recent Such-And-Such" or "Herald Rules Which Use This" or whatever.
We don't do a very good job of communicating that these are partial lists, or how to see all the results. Usually there's a button in the upper right, which is fine, but this could be better.
Add an explicit "more stuff" button that shows up where a pager would appear and makes it clear that (a) the list is partial; and (b) you can click the button to see everything.
Test Plan: {F6302793}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20315
Summary:
Ref T5474. In 99% of cases, a separate "archived/active" status for triggers probably doesn't make much sense: there's not much reason to ever disable/archive a trigger explcitly, and the archival rule is really just "is this trigger used by anything?".
(The one reason I can think of to disable a trigger manually is because you want to put something in a column and skip trigger rules, but you can already do this from the task detail page anyway, and disabling the trigger globally is a bad way to accomplish this if it's in use by other columns.)
Instead of adding a separate "status", just track how many columns a trigger is used by and consider it "inactive" if it is not used by any active columns.
Test Plan: This is slightly hard to test exhaustively since you can't share a trigger across multiple columns right now, but: rebuild indexes, poked around the trigger list and trigger details, added/removed triggers.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20308
Summary:
Ref T5474. Allow columns to play a sound when tasks are dropped.
This is a little tricky because Safari has changed somewhat recently to require some gymnastics to play sounds when the user didn't explicitly click something. Preloading the sound on the first mouse interaction, then playing and immediately pausing it seems to work, though.
Test Plan: Added a trigger with 5 sounds. In Safari, Chrome, and Firefox, dropped a card into the column. In all browsers, heard a nice sequence of 5 sounds played one after the other.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20306
Summary:
Ref T13074. If you hit a prompt on a drop operation (today: MFA; in the future, maybe "add a comment" or "assign this task"), we currently leave the board in a bad semi-frozen state if you cancel the workflow by pressing "Cancel" on the dialog.
Instead, put things back the way they were.
Test Plan: Dragged an MFA-required card, cancelled the MFA prompt, got a functional board instead of a semi-frozen board I needed to reload.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20305
Summary:
Ref T5474. The first rough cut of triggers showed some of the trigger rules in a tooltip when you hover over the "add/remove" trigger menu.
This isn't great since we don't have much room and it's a bit finnicky / hard to read.
Since we have a better way to show effects now in the drop preview, just use that instead. When you hover over the trigger menu, preview the trigger in the "drop effect" element, with a "Trigger: such-and-such" header.
Test Plan:
- This is pretty tough to screenshot.
- Hovered over menu, got a sensible preview of the trigger effects.
- Dragged a card over the menu, no preview.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20304
Summary:
Ref T5474. This provides a Herald-like UI for editing workboard trigger rules.
This probably has some missing pieces and doesn't actually save anything to the database yet, but the basics at least roughly work.
Test Plan: {F6299886}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20301
Summary:
Ref T10335. When you (for example) drag a "Resolved" task into a column with "Trigger: change status to resolved.", don't show a hint that the action will "Change status to resolved." since this isn't helpful and is somewhat confusing.
For now, the only visibility operator is "!=" since all current actions are simple field comparisons, but some actions in the future (like "add subscriber" or "remove project") might need other conditions.
Test Plan:
Dragged cards in ways that previously provided useless hints: move from column A to column B on a "Group by Priority" board; drag a resolved task to a "Trigger: change status to as resolved" column. Saw a more accurate preview in both cases.
Drags which actually cause effects still show the effects correctly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335
Differential Revision: https://secure.phabricator.com/D20300
Summary:
Ref T10335. Ref T5474. When you drag-and-drop a card on a workboard, show a UI hint which lists all the things that the operation will do.
This shows: column moves; changes because of dragging a card to a different header; and changes which will be caused by triggers.
Not implemented here:
- Actions are currently shown even if they have no effect. For example, if you drag a "Normal" task to a different column, it says "Change priority to Normal.". I plan to hide actions which have no effect, but figuring this out is a little bit tricky.
- I'd like to make "trigger effects" vs "non-trigger effects" a little more clear in the future, probably.
Test Plan:
Dragged stuff between columns and headers, and into columns with triggers. Got appropriate preview text hints previewing what the action would do in the UI.
(This is tricky to take a screenshot of since it only shows up while the mouse cursor is down.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10335, T5474
Differential Revision: https://secure.phabricator.com/D20299
Summary:
Depends on D20278. Ref T5474. This change creates some new empty objects that do nothing, and some new views for looking at those objects. There's no actual useful behavior yet.
The "Edit" controller is custom instead of being driven by "EditEngine" because I expect it to be a Herald-style "add new rules" UI, and EditEngine isn't a clean match for those today (although maybe I'll try to move it over).
The general idea here is:
- Triggers are "real" objects with a real PHID.
- Each trigger has a name and a collection of rules, like "Change status to: X" or "Play sound: Y".
- Each column may be bound to a trigger.
- Multiple columns may share the same trigger.
- Later UI refinements will make the cases around "copy trigger" vs "reference the same trigger" vs "create a new ad-hoc trigger" more clear.
- Triggers have their own edit policy.
- Triggers are always world-visible, like Herald rules.
Test Plan: Poked around, created some empty trigger objects, and nothing exploded. This doesn't actually do anything useful yet since triggers can't have any rule behavior and columns can't actually be bound to triggers.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5474
Differential Revision: https://secure.phabricator.com/D20279
Summary: See downstream <https://phabricator.wikimedia.org/T166358>. The notifications menu is missing some CSS to color and style values in stories like "renamed task from X to Y".
Test Plan:
Before:
{F6302123}
After:
{F6302122}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20310
Summary:
Depends on D20277. Ref T10333.
- Put profile icons on "Group by Owner".
- Add a similar "Group by Author". Probably not terribly useful, but cheap to implement now.
- Add "Sort by Title". Very likely not terribly useful, but cheap to implement and sort of flexible?
Test Plan: {F6265396}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20278
Summary:
Depends on D20274. Ref T10578. This is en route to an ordering by points, it's just a simpler half-step on the way there.
Allow columns to be sorted by creation date, so the newest tasks rise to the top.
In this ordering you can never reposition cards, since editing a creation date by dragging makes no sense. This will be true of the "points" ordering too (although we could imagine doing something like prompting the user, some day).
Test Plan: Viewed boards by "natural" (allows reordering both when dragging within and between columns), "priority" (reorder only within columns), and "creation date" (reorder never). Dragged cards around between and within columns, got apparently sensible behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10578
Differential Revision: https://secure.phabricator.com/D20275
Summary:
Depends on D20273. Fixes T10722. Currently, we don't make it very clear when a card can't be edited. Long ago, some code made a weak attempt to do this (by hiding the "grip" on the card), but later UI changes hid the "grip" unconditionally so that mooted things.
Instead:
- Replace the edit pencil with a red lock.
- Provide cursor hints for grabbable / not grabbable.
- Don't let users pick up cards they can't edit.
Test Plan: On a workboard with a mixture of editable and not-editable cards, hovered over the different cards and was able to figure out which ones I could drag or not drag pretty easily. Picked up cards I could pick up, wasn't able to drag cards I can't edit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10722
Differential Revision: https://secure.phabricator.com/D20274
Summary:
Depends on D20271. Ref T10333. When a column is empty but a board is grouped (by priority, owner, etc) render the headers properly.
When a column has headers, don't apply the "empty" style even if it has no cards. This style just makes some empty space so you can drag-and-drop more easily, but headers do the same thing.
Test Plan: {F6264611}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20272
Summary:
Depends on D20267. Depends on D20268. Ref T10333. Currently, we support "Natural" and "Priority" orders, but a lot of the particulars are pretty hard-coded, including some logic in `ManiphestTask`.
Although it's not clear that we'll ever put other types of objects on workboards, it seems generally bad that you need to modify `ManiphestTask` to get a new ordering.
Pull the ordering logic out into a `ProjectColumnOrder` hierarchy instead, and let each ordering define the things it needs to work (name, icon, what headers look like, how different objects are sorted, and how to apply an edit when you drop an object under a header).
Then move the existing "Natural" and "Priority" orders into this new hierarchy.
This has a minor bug where using the "Edit" workflow to change a card's priority on a priority-ordered board doesn't fully refresh card/header order since the response isn't ordering-aware. I'll fix that in an upcoming change.
Test Plan: Grouped workboards by "Natural" and "Priority", dragged stuff around within and between columns, grepped for all touched symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20269
Summary:
Depends on D20266. Boards currently have several `whateverMap<cardPHID => stuff>` properties, but we can just move these all down into a `CardTemplate`, similar to the recently introduced `HeaderTemplate`.
The `CardTemplate` holds all the global information for a card, and then `Card` is specific for a particular copy in a column. Today, each `CardTemplate` has one `Card`, but a `CardTemplate` may have more than one card in the future (when we add subproject columns).
Test Plan: Viewed workboards in different sort orders and dragged stuff around, grepped for all affected symbols.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20267
Summary:
Depends on D20263. Ref T10333. I want to add groups like "Assignee" to workboards. This means you may have several tasks grouped under, say, "Alice".
When you drag the bottom-most task under "Alice" to the top, what does that mean?
Today, the only grouping is "Priority", and it means "change the task's secret/hidden global subpriority". However, this seems to generally be a somewhat-bad answer, and is quite complex. It also doesn't make much sense for an author grouping, since one task can't really be "more assigned" to Alice than another task.
Users likely intend this operation to mean "move it, visually, with no other effects" -- that is, user intent is to shuffle sticky notes around on a board, not edit anything substantive. The meaning is probably something like "this is similar to other nearby tasks" or "maybe this is a good place to start", which we can't really capture with any top-level attribute.
We could extend "subpriority" and give tasks a secret/hidden "sub-assignment strength" and so on, but this seems like a bad road to walk down. We'll also run into trouble later when subproject columns may appear on the board, and a user could want to put a task in different positions on different subprojects, conceivably.
In the "Natural" order view, we already have what is probably a generally better approach for this: a task display order particular to the column, that just remembers where you put the sticky notes.
Move away from "subpriority", and toward a world where we mostly keep sticky notes where you stuck them and move them around only when we have to. With no grouping, we still sort by "natural" order, as before. With priority grouping, we now sort by `<priority, natural>`. When you drag stuff around inside a priority group, we update the natural order.
This means that moving cards around on a "priority" board will also move them around on a "natural" board, at least somewhat. I think this is okay. If it's not intuitive, we could give every ordering its own separate "natural" view, so we remember where you stuck stuff on the "priority" board but that doesn't affect the "Natural" board. But I suspect we won't need to.
Test Plan:
- Viewed and dragged a natural board.
- Viewed and dragged a priority board.
- Dragged within and between groups of 0, 1, and multiple items.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20265
Summary:
Ref T13074. Today, in normal task list views in Maniphest (not workboards), you can (sometimes) reorder tasks if the view is priority-sorted.
I suspect no one ever does this, few users know it's supported, and that it was basically rendered obsolete the day we shipped workboards.
This also means that we need to maintain a global "subpriority" for tasks, which distinguishes between different tasks at the same priority level (e.g., "High") and maintains a consistent ordering on workboards.
As we move toward making workboards more flexible (e.g., group by author / owner / custom fields), I'd like to try moving away from "subpriority" and possibly removing it entirely, in favor of "natural order", which basically means "we kind of remember where you put the card and it works a bit like a sticky note".
Currently, the "natural order" and "subpriority" systems are sort of similar but also sort of in conflict, and the "subpriority" system can't really be extended while the "natural order / column position" system can.
The only real reason to have a global "subpriority" is to support the list-view drag-and-drop.
It's possible I'm wrong about this and a bunch of users love this feature, but we can re-evaluate if we get feedback in this vein.
(This just removes UI, the actual subpriority system is still intact and still used on workboards.)
Test Plan: Viewed task lists, was no longer able to drag stuff. Grepped for affected symbols. Dragged stuff in remaining grippable lists, like "Edit Forms" in EditEngine config.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13074
Differential Revision: https://secure.phabricator.com/D20263
Summary:
These effects feel like they're possibly overkill, since other CSS rules make the selection reticle behave correctly and the implementation is relatively intuitive.
Or not, either way.
Test Plan: Selected text on either side of a 2-up diff, no more opacity effects.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20264
Summary:
Ref T10333. Ref T8135. Depends on D20247. Allow users to drag-and-drop cards on a priority-sorted workboard under headers, even if the header has no other cards.
As of D20247, headers show up but they aren't really interactive. Now, you can drag cards directly underneath a header (instead of only between other cards). For example, if a column has only one "Wishlist" task, you may drag it under the "High", "Normal", or "Low" priority headers to select a specific priority.
(Some of this code still feels a little rough, but I think it will generalize once other types of sorting are available.)
Test Plan: Dragged cards within and between priority groups, saw appropriate priority edits applied in every case I could come up with.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333, T8135
Differential Revision: https://secure.phabricator.com/D20248
Summary:
Ref T10333. When workboards are ordered (for example, by priority), add headers to the various groups. Major goals are:
- Allow users to drag-and-drop to set values that no cards currently have: for example, you can change a card priority to "normal" by dragging it under the "normal" header, even if no other cards in the column are currently "Normal".
- Make future orderings more useful, particularly "order by assignee". We don't really have room to put the username on every card and it would create a fair amount of clutter, but we can put usernames in these headers and then reference them with just the profile picture. This also allows you to assign to users who are not currently assigned anything in a given column.
- Make the drag-and-drop behavior more obvious by showing what it will do more clearly (see T8135).
- Make things a little easier to scan in general: because space on cards is limited, some information isn't conveyed very clearly (for example, priority information is currently conveyed //only// through color, which can be hard to pick out visually and is probably not functional for users who need vision accommodations).
- Maybe do "swimlanes": this is pretty much a "swimlanes" UI if we add whitespace at the bottom of each group so that the headers line up across all the columns (e.g., "Normal" is at the same y-axis position in every column as you scroll down the page). Not sold on this being useful, but it's just a UI adjustment if we do want to try it.
NOTE: This only makes these headers work for display.
They aren't yet recognized as targets by the drag list UI, so you can't drag cards into an empty group. I'll tackle that in a followup.
Test Plan: {F6257686}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10333
Differential Revision: https://secure.phabricator.com/D20247
Summary:
Ref T10334. Partly, this just improves visual feedback for all drag operations. After D20242, we can have cases where you (for example) drag a low-priority node to a very tall column on a priority-ordered workboard. In this case, the actual dashed-border-drop-target may not be on screen.
We might make the column scroll or put some kind of hint in the UI in this case, but an easy starting point is just to make the "yes, you're targeting this column" state a bit more clear.
Test Plan: Dragged tasks between columns, saw the border higlight on the target columns. This is very tricky to take a screenshot of.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10334
Differential Revision: https://secure.phabricator.com/D20245
Summary:
Ref T10334. When a workboard is ordered by priority, dragging from column "A" to a particular place in column "B" currently means "move this task to column B, and adjust its priority so that it naturally sorts into the location under my mouse cursor".
Users frequently find this confusing / undesirable.
To begin improving this, make "drag from column A to column B" and "drag from somewhere in column A to somewhere else in column A" into different operations. The first operation, a movement between columns, no longer implies an ordering change. The second action still does.
So if you actually want to change the priority of a task, you drag it within its current column. If you just want to move it to a different column, you drag it between columns.
This creates some possible problems:
- Some users may love the current behavior and just not be very vocal about it. I doubt it, but presumably we'll hear from them if we break it.
- If you actualy want to move + reorder, it's a bit more cumbersome now. We could possibly add something like "shift + drag" for this if there's feedback.
- The new behavior is probably less surprising, but may not be much more obvious. Future changes (for example, in T10335) should help make it more clear.
- When you mouse cursor goes over column B, the card dashed-rectangle preview target thing jumps to the correct position in the column -- but that may not be under your mouse cursor. This feels pretty much fine if the whole column fits on screen. It may not be so great if the column does not fit on screen and the dashed-rectangle-thing has vanished. This is just a UI feedback issue and we could refine this later (scroll/highlight the column).
Test Plan:
- Created several tasks at different priority levels, sorted a board by priority, dragged tasks between columns. Dragging from "A" to "B" no longer causes a priority edit.
- Also, dragged within a column. This still performs priority edits.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10334
Differential Revision: https://secure.phabricator.com/D20242
Summary:
Ref T13249. See PHI1115. I initially wanted to make `bin/policy unlock --owner <user> H123` work to transfer ownership of a Herald rule, although I'm no longer really sure this makes much sense.
In any case, this makes things a little better and more modern.
I removed the storage table for rule comments. Adding comments to Herald rules doesn't work and probably doesn't make much sense.
Test Plan: Created and edited Herald rules, grepped for all the transaction type constants.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20258
Summary:
Ref T13249.
- When a line has only increased in indent depth, don't red-fill highlight the left side of the diff. Since reading a diff //mostly// involves focusing on the right side, indent depth changes are generally visible enough without this extra hint. The extra hint can become distracting in cases where there is a large block of indent depth changes.
- Move the markers slightly to the left, to align them with the gutter.
- Make them slightly opaque so they're a little less prominent.
Test Plan: See screenshots.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20251
Summary:
Depends on D20219. Ref T13258. Ref T11415. Installs sometimes have long-running builds or unimportant builds which they may not want to hold up drafts, affect buildable status, or warn during `arc land`.
Some builds have side effects (like deployment or merging) and are not idempotent. They can cause problems if restarted.
In other cases, builds are isolated and idempotent and generally safe, and it's okay for marketing interns to restart them.
To address these cases, add "Behaviors" to Build Plans:
- Hold Drafts: Controls how the build affects revision promotion from "Draft".
- Warn on Land: Controls the "arc land" warning.
- Affects Buildable: Controls whether we care about this build when figuring out if a buildable passed or failed overall.
- Restartable: Controls whether this build may restart or not.
- Runnable: Allows you to weaken the requirements to run the build if you're confident it's safe to run it on arbitrary old versions of things.
NOTE: This only implements UI, none of these options actually do anything yet.
Test Plan:
Mostly poked around the UI. I'll actually implement these behaviors next, and vet them more thoroughly.
{F6244828}
{F6244830}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13258, T11415
Differential Revision: https://secure.phabricator.com/D20220
Summary:
Ref T13259. An install provided feedback that it wasn't obvious you could click the buttons in this UI.
Make it more clear that these are clickable buttons.
Test Plan:
{F6251585}
{F6251586}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13259
Differential Revision: https://secure.phabricator.com/D20238
Summary:
See T13253. After D20200 (which changed the task schema) these migrations no longer run, since the PHP code will expect a column to exist that won't exist until a `20190220.` migration runs.
We don't need these migrations, since anyone upgrading through September 2017 gets a "rebuild search indexes" activity anyway (see T11932). Just no-op them.
Test Plan: Grepped for `queueDocumentForIndexing()` in `autopatches/`, removed all of it.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D20243
Summary:
Ref T5401. Depends on D20201. Add timestamps to worker tasks to track task creation, and pass that through to archive tasks. This lets us measure the total time the task spent in the queue, not just the duration it was actually running.
Also displays this information in the daemon status console; see screenshot: {F6225726}
Test Plan:
Stopped daemons, ran `bin/search index --all --background` to create lots of tasks, restarted daemons, observed expected values for `dateCreated` and `epochArchived` in the archive worker table.
Also tested the changes to `unarchiveTask` by forcing a search task to permanently fail and then `bin/worker retry`ing it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T5401
Differential Revision: https://secure.phabricator.com/D20200
Summary:
Depends on D20196. See PHI985. When empty, the "moved/copied" gutter currently renders with the same background color as the rest of the line. This can be misleading because it makes code look more indented than it is, especially if you're unfamiliar with the tool:
{F6225179}
If we remove this misleading coloration, we get a white gap. This is more clear, but looks a little odd:
{F6225181}
Instead, give this gutter a subtle background fill in all casses, to make it more clear that it's a separate gutter region, not a part of the text diff:
{F6225183}
Test Plan: See screenshots. Copied text from a diff, added/removed inlines, etc.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20197
Summary:
Ref T12822. Ref PHI878. This is some leftover code from the old selection behavior that prevented visual selection of the left side of a diff if the user clicked on the right -- basically, a much simpler attack on what ultimately landed in D20191.
I think the change from `th` to `td` "broke" it so it didn't interfere with the other behavior, which is why I didn't have to remove it earlier. It's no longer necessary, in any case.
Test Plan: Grepped for behavior name, selected stuff on both sides of a diff.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20196
Summary:
Ref T13161.
- Don't show ">>" when the line indentation changed but the text also changed, this is just "the line changed".
- The indicator seems a little cleaner if we just reuse the existing "bright" colors, which already have colorblind colors anyway.
Test Plan: Got slightly better rendering for some diffs locally.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161
Differential Revision: https://secure.phabricator.com/D20195
Summary:
Ref T12822. Ref T2495. This is the good version of D20193.
Currently, we display various nonprintable characters (ZWS, nonbreaking space, various control characters) as themselves, so they're generally invisible.
In T12822, one user reports that all their engineers frequently type ZWS characters into source somehow? I don't really believe this (??), and this should be fixed in lint.
That said, the only real reason not to show these weird characters in a special way was that it would break copy/paste: if we render ZWS as "🐑", and a user copy-pastes the line including the ZWS, they'll get a sheep.
At least, they would have, until D20191. Now that this whole thing is end-to-end Javascript magic, we can copy whatever we want.
In particular, we can render any character `X` as `<span data-copy-text="Y">X</span>`, and then copy "Y" instead of "X" when the user copies the node. Limitations:
- If users select only "X", they'll get "X" on their clipboard. This seems fine. If you're selecting our ZWS marker *only*, you probably want to copy it?
- If "X" is more than one character long, users will get the full "Y" if they select any part of "X". At least here, this only matters when "X" is several spaces and "Y" is a tab. This also seems fine.
- We have to be kind of careful because this approach involves editing an HTML blob directly. However, we already do that elsewhere and this isn't really too hard to get right.
With those tools in hand:
- Replace "\t" (raw text / what gets copied) with the number of spaces to the next tab stop for display.
- Replace ZWS and NBSP (raw text) with a special marker for display.
- Replace control characters 0x00-0x19 and 0x7F, except for "\t", "\r", and "\n", with the special unicode "control character pictures" reserved for this purpose.
Test Plan:
- Generated and viewed a file like this one:
{F6220422}
- Copied text out of it, got authentic raw original source text instead of displayed text.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822, T2495
Differential Revision: https://secure.phabricator.com/D20194
Summary:
Ref T12822. Fixes a few things:
- Firefox selection of weird ranges with an inline between the start and end of the range now works correctly.
- "Show More Context" rows now render, highlight, and select properly.
- Prepares for nodes to have copy-text which is different from display-text.
- Don't do anything too fancy in 1-up/unified mode. We don't copy line numbers after the `content: attr(data-n)` change, but that's as far as we go, because trying to do more than that is kind of weird and not terribly intuitive.
Test Plan:
- Selected and copied weird ranges in Firefox.
- Kept an eye on "Show More Context" rows across select and copy operations.
- Generally poked around in Safari/Firefox/Chrome.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20192
Summary:
Ref T12822. Ref T13161. By default, when users select text from a diff and copy it to the clipboard, they get both sides of the diff and all the line numbers. This is usually not what they intended to copy.
As of D20188, we use `content: attr(...)` to render line numbers. No browser copies this text, so that fixes line numbers.
We can use "user-select" CSS to visually prevent selection of line numbers and other stuff we don't want to copy. In Firefox and Chrome, "user-select" also applies to copied text, so getting "user-select" on the right nodes is largely good enough to do what we want.
In Safari, "user-select" is only visual, so we always need to crawl the DOM to figure out what text to pull out of it anyway.
In all browsers, we likely want to crawl the DOM anyway because this will let us show one piece of text and copy a different piece of text. We probably want to do this in the future to preserve "\t" tabs, and possibly to let us render certain character codes in one way but copy their original values. For example, we could render "\x07" as "␇".
Finally, we have to figure out which side of the diff we're copying from. The rule here is:
- If you start the selection by clicking somewhere on the left or right side of the diff, that's what you're copying.
- Otherwise, use normal document copy rules.
So the overall flow here is:
- Listen for clicks.
- When the user clicks the left or right side of the diff, store what they clicked.
- When a selection starts, and something is actually selected, check if it was initiated by clicking a diff. If it was, apply a visual effect to get "user-select" where it needs to go and show the user what we think they're doing and what we're going to copy.
- (Then, try to handle a bunch of degenerate cases where you start a selection and then click inside that selection.)
- When a user clicks elsewhere or ends the selection with nothing selected, clear the selection mode.
- When a user copies text, if we have an active selection mode, pull all the selected nodes out of the DOM and filter out the ones we don't want to copy, then stitch the text back together. Although I believe this didn't work well in ~2010, it appears to work well today.
Test Plan: This mostly seems to work in Safari, Chrome, and Firefox. T12822 has some errata. I haven't tested touch events but am satisfied if the touch event story is anything better than "permanently destroys data".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20191
Summary:
Ref T13161. Ref T12822. Today, we use invisible Zero-Width Spaces to try to improve copy/paste behavior from Differential.
After D20188, we no longer need ZWS characters to avoid copying line numbers. Get rid of these secret invisible semantic ZWS characters completely.
This means that both the left-hand and right-hand side of diffs become copyable, which isn't desired. I'll fix that with a hundred thousand lines of Javascript in the next change: this is a step toward everything working better, but doesn't fix everything yet.
Test Plan:
- Grepped for `zws`, `grep -i zero | grep -i width`.
- Copied text out of Differential: got both sides of the diff (not ideal).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20189
Summary:
Ref T13161. Ref T12822. See PHI870. Long ago, the web was simple. You could leave your doors unlocked, you knew all your neighbors, crime hadn't been invented yet, and `<th>3</th>` was a perfectly fine way to render a line number cell containing the number "3".
But times have changed!
- In PHI870, this isn't good for screenreaders. We can't do much about this, so switch to `<td>`.
- In D19349 / T13105 and elsewhere, this `::after { content: attr(data-n); }` approach seems like the least bad general-purpose approach for preventing line numbers from being copied. Although Differential needs even more magic beyond this in the two-up view, this is likely good enough for the one-up view, and is consistent with other views (paste, harbormaster logs, general source display) where this technique is sufficient on its own.
The chance this breaks //something// is pretty much 100%, but we've got a week to figure out what it breaks. I couldn't find any issues immediately.
Test Plan:
- Created, edited, deleted inlines in 1-up and 2-up views.
- Replied, keyboard-navigated, keyboard-replied, drag-selected, poked and prodded everything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20188
Summary:
Depends on D20181. Depends on D20182. Fixes T3498. Ref T13161. My claim, at least, is that D20181 can be tweaked to be good enough to throw away this "feature" completely.
I think this feature was sort of a mistake, where the ease of access to `diff -bw` shaped behavior a very long time ago and then the train just ran a long way down the tracks in the same direction.
Test Plan: Grepped for `whitespace`, deleted almost everything. Poked around the UI a bit. I'm expecting the whitespace changes to get some more iteration this week so I not being hugely pedantic about testing this stuff exhaustively.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T3498
Differential Revision: https://secure.phabricator.com/D20185
Summary:
Ref T13161. See PHI723. Our whitespace handling is based on whitespace flags like `diff -bw`, mostly just for historical reasons: long ago, the easiest way to minimize the visual impact of indentation changes was to literally use `diff -bw`.
However, this approach is very coarse and has a lot of problems, like detecting `"ab" -> "a b"` as "only a whitespace change" even though this is always semantic. It also causes problems in YAML, Python, etc. Over time, we've added a lot of stuff to mitigate the downsides to this approach.
We also no longer get any benefits from this approach being simple: we need faithful diffs as the authoritative source, and have to completely rebuild the diff to `diff -bw` it. In the UI, we have a "whitespace mode" flag. We have the "whitespace matters" configuration.
I think ReviewBoard generally has a better approach to indent depth changes than we do (see T13161) where it detects them and renders them in a minimal way with low visual impact. This is ultimately what we want: reduce visual clutter for depth-only changes, but preserve whitespace changes in strings, etc.
Move toward detecting and rendering indent depth changes. Followup work:
- These should get colorblind colors and the design can probably use a little more tweaking.
- The OneUp mode is okay, but could be improved.
- Whitespace mode can now be removed completely.
- I'm trying to handle tabs correctly, but since we currently mangle them into spaces today, it's hard to be sure I actually got it right.
Test Plan: {F6214084}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161
Differential Revision: https://secure.phabricator.com/D20181
Summary:
Depends on D20179. Ref T13088. See PHI351. See PHI1018. In various cases, unit tests names are 19 paths mashed together.
This is probably not an ideal name, and the test harness should probably pick a better name, but if users are fine with it and don't want to do the work to summarize on their own, accept them. We may summarize with "..." in some cases depending on how this fares in the UI.
The actual implementation is a separate "strings" table which is just `<hash-of-string, full-string>`. The unit message table can end up being mostly strings, so this should reduce storage requirements a bit.
For now, I'm not forcing a migration: new writes use the new table, existing rows retain the data. I plan to provide a migration tool, recommend migration, then force migration eventually.
Prior to that, I'm likely to move at least some other columns to use this table (e.g., lint names), since we have a lot of similar data (arbitrarily long user string constants that we are unlikely to need to search or filter).
Test Plan: {F6213819}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D20180
Summary:
Ref T13249. See PHI810. We currently show availability dots in some interfaces (timeline, mentions) but not others (typeheads/tokenizers).
They're potentially quite useful in tokenizers, e.g. when assigning tasks to someone or requesting reviews. Show them in more places.
(The actual rendering here isn't terribly clean, and it would be great to try to unify all these various behaviors some day.)
Test Plan:
{F6212044}
{F6212045}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20173
Summary:
Ref T13249. See PHI1059. This allows "locked" in `maniphest.statuses` to specify that either "comments" are locked (current behavior, advisory, overridable by users with edit permission, e.g. for calming discussion on a contentious issue or putting a guard rail on things); or "edits" are locked (hard lock, only task owner can edit things).
Roughly, "comments" is a soft/advisory lock. "edits" is a hard/strict lock. (I think both types of locks have reasonable use cases, which is why I'm not just making locks stronger across the board.)
When "edits" are locked:
- The edit policy looks like "no one" to normal callers.
- In one special case, we sneak the real value through a back channel using PolicyCodex in the specific narrow case that you're editing the object. Otherwise, the policy selector control incorrectly switches to "No One".
- We also have to do a little more validation around applying a mixture of status + owner transactions that could leave the task uneditable.
For now, I'm allowing you to reassign a hard-locked task to someone else. If you get this wrong, we can end up in a state where no one can edit the task. If this is an issue, we could respond in various ways: prevent these edits; prevent assigning to disabled users; provide a `bin/task reassign`; uh maybe have a quorum convene?
Test Plan:
- Defined "Soft Locked" and "Hard Locked" statues.
- "Hard Locked" a task, hit errors (trying to unassign myself, trying to hard lock an unassigned task).
- Saw nice new policy guidance icon in header.
{F6210362}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20165
Summary:
Ref T13253. Fixes T6615. See that task for discussion.
- Remove three keys which serve no real purpose: `dataID` doesn't do anything for us, and the two `leaseOwner` keys are unused.
- Rename `leaseOwner_2` to `key_owner`.
- Fix an issue where `dataID` was nullable in the active table and non-nullable in the archive table.
In practice, //all// workers have data, so all workers have a `dataID`: if they didn't, we'd already fatal when trying to move tasks to the archive table. Just clean this up for consistency, and remove the ancient codepath which imagined tasks with no data.
Test Plan:
- Ran `bin/storage upgrade`, inspected tables.
- Ran `bin/phd debug taskmaster`, worked through a bunch of tasks with no problems.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13253, T6615
Differential Revision: https://secure.phabricator.com/D20175
