Summary: Ref T13513. When rendering an inline suggestion for display, use highlighting and diffing.
Test Plan: {F7495053}
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21277
Summary:
Ref T13513. This still has quite a few rough edges and some significant performance isssues, but appears to mostly work.
Allow reviewers to "Suggest Edit" on an inline comment and provide replacement text for the highlighted source.
Test Plan: Created, edited, reloaded, and submitted inline comments in various states with and without suggestion text.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21276
Summary:
Ref T13513. The on-hover-inline reticle has switched over to have cell-based behavior. Switch the on-hover-line-number reticle to use the same behavior.
Also, clean up the dirty/redraw loop slightly: we no longer need to dirty on resize, and we don't need to redraw if the range isn't actually dirty.
Test Plan: Highlighted lines and line ranges. Hovered over inlines.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21262
Summary:
Ref T13513. Give selected inlines a selection state and visual cues which are similar to the changeset selection state.
Also fix a couple of minor issues with select interactions and offset comments.
Test Plan: Selected inlines, saw obvious visual cues.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21256
Summary:
Ref T13513. When a user selects a text range and uses "New Inline Comment" to create a comment directly from a range, store the offset information alongside the comment.
When hovering the comment, highlight the original range.
Test Plan: {F7480926, size=full}
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21250
Summary:
Ref T13513. Currently:
- If you click the "Show Changeset" button, your state change doesn't actually get saved on the server.
- It's hard to select a changeset path name for copy/paste because the "highlight the header" code tends to eat the event.
Instead: persist the former event; make the actual path text not be part of the highlight hitbox.
Test Plan:
- Clicked "Show Changeset", reloaded, saw changeset visibility persisted.
- Selected changeset path text without issues.
- Clicked non-text header area to select/deselect changesets.
Maniphest Tasks: T13513
Differential Revision: https://secure.phabricator.com/D21236
Summary:
Ref T13520. Generally, make the table of contents look and more like the paths panel:
- Show a hierarchy, with compression for single-sibling children.
- Use the same icons, instead of "M D" and "(img)" stuff.
- Use EditDistanceMatrix to do a piece-by-piece diff of paths changes.
- Show path changes within the path list.
I'm not entirely sold on this, but it was complicated to write and I've never heard the term "sunk cost fallacy". I think this is mostly a net improvement, but may need some adjustments and followup.
Test Plan: Viewed various changes in Differential and Diffusion, saw a more usable table of contents.
Maniphest Tasks: T13520
Differential Revision: https://secure.phabricator.com/D21183
Summary:
Ref T13516.
- Add an "Add Comment" navigation anchor.
- Make selection state more clear.
- Make hidden state tidier and more clear.
- Hide "View Options" in the hidden state to dodge all the weird behaviors it implies.
- Click to select/deselect changesets.
- When you open the view dropdown menu, then press "h", close the dropdown menu.
Test Plan: Fiddled with all these behaviors.
Maniphest Tasks: T13516
Differential Revision: https://secure.phabricator.com/D21161
Summary:
Ref T13425. Currently, code inputs and all outputs are grouped into a single block. This is fine for display notebooks but not great for diffing notebooks.
Instead, split source code input into individual lines with one line per block, and each output into its own block.
This allows you to leave actual line-by-line inlines on source, and comment on outputs individually.
Test Plan: {F6888583}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20840
Summary:
Depends on D20835. Ref T13425. Ref T13414. When a document has a list of content blocks, we may not be able to diff it directly, but we can hash each block and then diff the hashes (internally "diff" also does approximately the same thing).
We could do this ourselves with slightly fewer layers of indirection, but: diff already exists; we already use it; we already have a bunch of abstractions on top of it; and it's likely much faster on large inputs than the best we can do in PHP.
Test Plan: {F6888169}
Maniphest Tasks: T13425, T13414
Differential Revision: https://secure.phabricator.com/D20836
Summary:
Depends on D20832. Ref T13425. Emit Jupyter notebooks as diffable blocks with block keys.
No diffing or proper inlines yet.
Test Plan: {F6888058}
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20833
Summary:
Depends on D20830. Ref T13425. Have the image engine elect into block rendering, then emit blocks.
This is rough (the blocks aren't actually diffed yet) but image diffs were already pretty rough so this is approximately a net improvement.
Test Plan: Viewed image diffs, saw nothing worse than before.
Maniphest Tasks: T13425
Differential Revision: https://secure.phabricator.com/D20831
Summary:
These effects feel like they're possibly overkill, since other CSS rules make the selection reticle behave correctly and the implementation is relatively intuitive.
Or not, either way.
Test Plan: Selected text on either side of a 2-up diff, no more opacity effects.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20264
Summary:
Ref T13249.
- When a line has only increased in indent depth, don't red-fill highlight the left side of the diff. Since reading a diff //mostly// involves focusing on the right side, indent depth changes are generally visible enough without this extra hint. The extra hint can become distracting in cases where there is a large block of indent depth changes.
- Move the markers slightly to the left, to align them with the gutter.
- Make them slightly opaque so they're a little less prominent.
Test Plan: See screenshots.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13249
Differential Revision: https://secure.phabricator.com/D20251
Summary:
Depends on D20196. See PHI985. When empty, the "moved/copied" gutter currently renders with the same background color as the rest of the line. This can be misleading because it makes code look more indented than it is, especially if you're unfamiliar with the tool:
{F6225179}
If we remove this misleading coloration, we get a white gap. This is more clear, but looks a little odd:
{F6225181}
Instead, give this gutter a subtle background fill in all casses, to make it more clear that it's a separate gutter region, not a part of the text diff:
{F6225183}
Test Plan: See screenshots. Copied text from a diff, added/removed inlines, etc.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D20197
Summary:
Ref T12822. Ref PHI878. This is some leftover code from the old selection behavior that prevented visual selection of the left side of a diff if the user clicked on the right -- basically, a much simpler attack on what ultimately landed in D20191.
I think the change from `th` to `td` "broke" it so it didn't interfere with the other behavior, which is why I didn't have to remove it earlier. It's no longer necessary, in any case.
Test Plan: Grepped for behavior name, selected stuff on both sides of a diff.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20196
Summary:
Ref T13161.
- Don't show ">>" when the line indentation changed but the text also changed, this is just "the line changed".
- The indicator seems a little cleaner if we just reuse the existing "bright" colors, which already have colorblind colors anyway.
Test Plan: Got slightly better rendering for some diffs locally.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161
Differential Revision: https://secure.phabricator.com/D20195
Summary:
Ref T12822. Fixes a few things:
- Firefox selection of weird ranges with an inline between the start and end of the range now works correctly.
- "Show More Context" rows now render, highlight, and select properly.
- Prepares for nodes to have copy-text which is different from display-text.
- Don't do anything too fancy in 1-up/unified mode. We don't copy line numbers after the `content: attr(data-n)` change, but that's as far as we go, because trying to do more than that is kind of weird and not terribly intuitive.
Test Plan:
- Selected and copied weird ranges in Firefox.
- Kept an eye on "Show More Context" rows across select and copy operations.
- Generally poked around in Safari/Firefox/Chrome.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12822
Differential Revision: https://secure.phabricator.com/D20192
Summary:
Ref T12822. Ref T13161. By default, when users select text from a diff and copy it to the clipboard, they get both sides of the diff and all the line numbers. This is usually not what they intended to copy.
As of D20188, we use `content: attr(...)` to render line numbers. No browser copies this text, so that fixes line numbers.
We can use "user-select" CSS to visually prevent selection of line numbers and other stuff we don't want to copy. In Firefox and Chrome, "user-select" also applies to copied text, so getting "user-select" on the right nodes is largely good enough to do what we want.
In Safari, "user-select" is only visual, so we always need to crawl the DOM to figure out what text to pull out of it anyway.
In all browsers, we likely want to crawl the DOM anyway because this will let us show one piece of text and copy a different piece of text. We probably want to do this in the future to preserve "\t" tabs, and possibly to let us render certain character codes in one way but copy their original values. For example, we could render "\x07" as "␇".
Finally, we have to figure out which side of the diff we're copying from. The rule here is:
- If you start the selection by clicking somewhere on the left or right side of the diff, that's what you're copying.
- Otherwise, use normal document copy rules.
So the overall flow here is:
- Listen for clicks.
- When the user clicks the left or right side of the diff, store what they clicked.
- When a selection starts, and something is actually selected, check if it was initiated by clicking a diff. If it was, apply a visual effect to get "user-select" where it needs to go and show the user what we think they're doing and what we're going to copy.
- (Then, try to handle a bunch of degenerate cases where you start a selection and then click inside that selection.)
- When a user clicks elsewhere or ends the selection with nothing selected, clear the selection mode.
- When a user copies text, if we have an active selection mode, pull all the selected nodes out of the DOM and filter out the ones we don't want to copy, then stitch the text back together. Although I believe this didn't work well in ~2010, it appears to work well today.
Test Plan: This mostly seems to work in Safari, Chrome, and Firefox. T12822 has some errata. I haven't tested touch events but am satisfied if the touch event story is anything better than "permanently destroys data".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20191
Summary:
Ref T13161. Ref T12822. Today, we use invisible Zero-Width Spaces to try to improve copy/paste behavior from Differential.
After D20188, we no longer need ZWS characters to avoid copying line numbers. Get rid of these secret invisible semantic ZWS characters completely.
This means that both the left-hand and right-hand side of diffs become copyable, which isn't desired. I'll fix that with a hundred thousand lines of Javascript in the next change: this is a step toward everything working better, but doesn't fix everything yet.
Test Plan:
- Grepped for `zws`, `grep -i zero | grep -i width`.
- Copied text out of Differential: got both sides of the diff (not ideal).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20189
Summary:
Ref T13161. Ref T12822. See PHI870. Long ago, the web was simple. You could leave your doors unlocked, you knew all your neighbors, crime hadn't been invented yet, and `<th>3</th>` was a perfectly fine way to render a line number cell containing the number "3".
But times have changed!
- In PHI870, this isn't good for screenreaders. We can't do much about this, so switch to `<td>`.
- In D19349 / T13105 and elsewhere, this `::after { content: attr(data-n); }` approach seems like the least bad general-purpose approach for preventing line numbers from being copied. Although Differential needs even more magic beyond this in the two-up view, this is likely good enough for the one-up view, and is consistent with other views (paste, harbormaster logs, general source display) where this technique is sufficient on its own.
The chance this breaks //something// is pretty much 100%, but we've got a week to figure out what it breaks. I couldn't find any issues immediately.
Test Plan:
- Created, edited, deleted inlines in 1-up and 2-up views.
- Replied, keyboard-navigated, keyboard-replied, drag-selected, poked and prodded everything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161, T12822
Differential Revision: https://secure.phabricator.com/D20188
Summary:
Ref T13161. See PHI723. Our whitespace handling is based on whitespace flags like `diff -bw`, mostly just for historical reasons: long ago, the easiest way to minimize the visual impact of indentation changes was to literally use `diff -bw`.
However, this approach is very coarse and has a lot of problems, like detecting `"ab" -> "a b"` as "only a whitespace change" even though this is always semantic. It also causes problems in YAML, Python, etc. Over time, we've added a lot of stuff to mitigate the downsides to this approach.
We also no longer get any benefits from this approach being simple: we need faithful diffs as the authoritative source, and have to completely rebuild the diff to `diff -bw` it. In the UI, we have a "whitespace mode" flag. We have the "whitespace matters" configuration.
I think ReviewBoard generally has a better approach to indent depth changes than we do (see T13161) where it detects them and renders them in a minimal way with low visual impact. This is ultimately what we want: reduce visual clutter for depth-only changes, but preserve whitespace changes in strings, etc.
Move toward detecting and rendering indent depth changes. Followup work:
- These should get colorblind colors and the design can probably use a little more tweaking.
- The OneUp mode is okay, but could be improved.
- Whitespace mode can now be removed completely.
- I'm trying to handle tabs correctly, but since we currently mangle them into spaces today, it's hard to be sure I actually got it right.
Test Plan: {F6214084}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13161
Differential Revision: https://secure.phabricator.com/D20181
Summary: Ref T13105. This needs refinement but blame sort of works again, now.
Test Plan: Viewed files in Diffusion and Files; saw blame in Diffusion when viewing in source mode.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19309
Summary: Cleans up a bunch of Differential odd/special colors. Adds some basic "highlight" colors instead of pure yellow.
Test Plan: Test each color change in normal and dark modes.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18239
Summary: Mostly this is an exercise to clean up our CSS and Celerity processor by making sure all important color decisions are generatable. It's somewhat resonable to use if you don't review code. Posting it up here mostly so I don't lose the work.
Test Plan: Visit lots and lots of pages with dark mode on and off.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18227
Summary:
Ref T12733. When a revision has unsubmitted checkmarks:
- Color the banner yellow.
- Show them in the "X unsubmitted" count.
- Make the "X unsubmitted" button cycle between all drafts (written but unpublished comments) and "draft done" (checked but unsubmitted "Done" checkbox comments).
Test Plan:
- Checked a "Done" box, saw "1 unsubmitted" and yellow banner.
- Clicked "5 unsubmitted" repeatedly, saw it cycle through all unsubmitted comments and checkboxes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18127
Summary: Adds spacing to the buttons, line-height for aligning text vertically.
Test Plan: Leave comments on a diff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18110
Summary: Ref T12733. This adds classes for unsubmitted/unsaved changes, and lays some groundwork for additional buttons.
Test Plan:
- Added, edited, deleted comments.
- Saw bar background color update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18045
Summary: Ref T12733. Completely removes the objectives UI.
Test Plan:
- Grepped for `objective`, etc.
- Browsed revisions, no JS errors / broken stuff.
- (If I missed anything, it's likely to turn up in followup changes.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18043
Summary:
Ref T12733.
- While editing a comment, show a pink star ({icon star, color=pink}) with a tooltip.
- Slight UI tweaks, including draft comments getting an indigo pencil ({icon pencil, color=indigo}).
Test Plan: {F4968470}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17977
Summary:
Ref T12733. In the longer run I'd like to just push this out from the edge, but that currently gets us into trouble since we start bumping into content. On my system, the trackpad scrollbar also expands in size when moused over, so the minimum number of pixels we need to push it out is approximatley 15px. This hits body content and the persistent chat.
For now, just disable this element on trackpad systems.
Test Plan:
Disconnected all USB peripherals, quit and relaunched Safari, saw no objective list.
Reconnected mouse, relaunched Safari, saw objective list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17974
Summary:
Minor UI tweaks:
- Use the dynamic icon for each file (e.g., image, text), not a hard-coded icon.
- Render the path (less important) in grey and the filename (more important) in black.
Test Plan: {F4966176}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17957
Summary:
Add important objectives (like waygates and quest markers) to the minimap.
This also probably fixes @cspeckmim's bug with the {key @} keyboard shortcut.
Test Plan:
(This is probably easier to undestand if you `arc patch` + click around.)
{F4966037}
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: cspeckmim
Differential Revision: https://secure.phabricator.com/D17955
Summary:
Fixes T1591. This was removed long ago because it was a mess to implement and caused a bunch of weird issues, and also my tolerance for dealing with weird JS issues was much, much lower.
I have now survived the fires of JX.Scrollbar and would love to address 200 small nitpicks about obscure browser behaviors on Linux, so open the floodgates again.
A secondary goal here is to create room to add a global view state menu on the right, with 300 options like "hide all inlines", "hide done inlines", "hide collapsed inlines", "hide ghosts", "show ghosts", "enable filetree", "disable filetree", etc, etc. Not sure how much of this I'll actually do. I have one more experiment I want to try first.
Test Plan: {F4963294}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T1591
Differential Revision: https://secure.phabricator.com/D17945
Summary:
Ref T12616. This puts "h" back to collapse or expand the current file.
This removes some very complicated/messy code around following links in the table of contents and getting files auto-expanded. I suspect no one will miss this, but we can restore it if ayone notices.
Test Plan: Pressed "h" to collapse/expand a file. Also used the menu items.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17940
Summary:
Fixes T8047. Ref T12616. Fixes T9270. This moves the "hover" part of the hover/drag behavior to the new code, leaving the "drag" part for a followup change.
The new hover UI behaves properly with Quicksand (T8047) and the filetree (T9270).
Test Plan: Hovered over inlines, saw lines select properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T9270, T8047
Differential Revision: https://secure.phabricator.com/D17919
Summary: Ref T12616. The ability to do {nav Edit > Cancel > Undo} to get your text back on inlines got dropped during the conversion. Restore it.
Test Plan:
Created, replied, and edited inlines, typed text, then cancelled. Was able to undo.
Also undid normal deletion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17916
Summary:
Ref T12616. Fixes T11648. Currently, we snug up replies with a negative margin (from T10563) but this throws off the anchor highlighting.
Instead:
- Remove padding from these dolumns.
- Use margins on the stuff inside them instead.
- Less margins for replies.
- Less margins for collapsed comments.
- Show some text for collapsed comments.
Test Plan:
{F4960890}
{F4960891}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T11648
Differential Revision: https://secure.phabricator.com/D17913
Summary:
Ref T12616. Fixes T12153. Currently, when you hide inlines, they hide completely and turn into a little bubble on the previous line.
Instead, collapse them to a single line one-by-one. Narrowly, this fixes T12153.
In the future, I plan to make these changes so this feature makes more sense:
- Introduce global "hide everything" states (T8909) so you can completely hide stuff if you want, and this represents more of a halfway state between "nuke it" and "view it".
- Make the actual rendering better, so it says "epriestley: blah blah..." instead of just "..." -- and looks less dumb.
The real goal here is to introduce `DiffInline` and continue moving stuff from the tangled jungle of a million top-level behaviors to sensible smooth statefulness.
Test Plan:
- Hid and revealed inlines in unified and two-up modes.
- These look pretty junk for now:
{F4948659}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T12153
Differential Revision: https://secure.phabricator.com/D17861
Summary: Moves basic colors into the processor.
Test Plan: Review a diff in sandbox with and without change.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17173
Summary: Ref T12089. This reverts back to using "bright" colors for full width changes in green and red.
Test Plan:
Review diffs, see full width colors.
{F2333933}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12089
Differential Revision: https://secure.phabricator.com/D17171
Summary: Minor color saturation here, ideal for low quality monitors.
Test Plan:
Review new colors in various scenarios.
{F2305178}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17141
Summary: Tweaks the diff colors here a bit, as well as making full diffs slightly easier to read in full. Ref T12060
Test Plan:
Tested prose diffs, email prose diffs, and a regular Differential revision.
{F2304056}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12060
Differential Revision: https://secure.phabricator.com/D17138
Summary:
Ref T7643. When you do something like this:
- Edit a task description.
- Click "Show Details" on the resulting transaction.
- Get a prose diff dialog showing the change.
...now add some "Old" and "New" tabs. These are useful for:
- reverting to the old text by copy/pasting;
- reading just the new/old text if the diff is noisy;
- sometimes just nice to have?
(This looks a little rough but I didn't want to put a negative margin on tab groups inside dialogs? Not sure what the best fix here is.)
Test Plan: {F1909390}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7643
Differential Revision: https://secure.phabricator.com/D16817
Summary: Fixes T11305, Ref T7754. Makes this menu dropdown act like actions and collapse to a fa-bars menu.
Test Plan:
View on mobile, desktop, browser. Click an action, spawn new page.
{F1717953}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7754, T11305
Differential Revision: https://secure.phabricator.com/D16265
Summary:
Fixes T11225. The primary issue here is that this rule is bleeding down too far. It appears that it's only intended to put space around the inline as a whole.
Spacing still isn't //perfect// since a few other rules are bleeding, but it feels reasonable now instead of being clearly broken.
Test Plan:
- Added "background: red;" to figure out what was being affected.
- Before:
{F1704081}
- After:
{F1704084}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11225
Differential Revision: https://secure.phabricator.com/D16184
Summary:
Ref T7643. When a large block of prose text is edited (like a wiki page), summarize the diff when sending mail.
For now, I'm still showing the whole thing in the web UI, since it's a bit more manageable there.
Also try to fix newlines in Airmail.
Test Plan:
This web diff:
{F1682591}
..became this mail diff:
{F1682592}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7643
Differential Revision: https://secure.phabricator.com/D16098
