Test Plan:
$ arc diff -a
$ arc diff -a # saw amend instead of a new commit
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4947
Summary:
We save repository version to lint cache but ignore it when reading the cache.
Fix it.
Test Plan: Made an error for linter with repo granularity, deleted the error from the cache. Relinted, didn't see the error. Changed another file and relinted, saw the error.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4841
Summary:
Mercurial 'arc land' uses the 'hg strip' command to clean up after
itself, but this command isn't available unless the mq extension is enabled.
The fix is to enable it for that particular command only.
Test Plan: Ran 'arc land' with the mq extension disabled. It worked.
Reviewers: epriestley, bos, sid0, dschleimer
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4955
Test Plan: Used it in Phabricator.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4928
Summary: We only caught half of this.
Test Plan: Unit test.
Reviewers: edward
Reviewed By: edward
CC: aran
Maniphest Tasks: T1261
Differential Revision: https://secure.phabricator.com/D4920
Summary: Git spits these out with \n at the end.
Test Plan:
```
>>> orbital ~/devtools/arcanist $ git branch --set-upstream trim master
Branch trim set up to track local branch master.
>>> orbital ~/devtools/arcanist $ arc which --base arc:upstream
RELATIVE COMMIT
If you run 'arc diff', changes between the commit:
acf7600e6e Temporarily restore apache/license linters
...and the current working copy state will be sent to Differential, because
it is the merge-base of the upstream of the current branch and HEAD, and
matched the rule 'arc:upstream' in your args 'base' configuration.
You can see the exact changes that will be sent by running this command:
$ git diff acf7600e6e728395..HEAD
These commits will be included in the diff:
3580555e4b30598f WIP
MATCHING REVISIONS
These Differential revisions match the changes in this working copy:
(No revisions match.)
Since there are no revisions in Differential which match this working copy, a
new revision will be created if you run 'arc diff'.
```
Reviewers: brennantaylor
Reviewed By: brennantaylor
CC: aran
Differential Revision: https://secure.phabricator.com/D4913
Summary:
Restores linters only, without unit tests or entry in ComprehensiveLinter. Marks them deprecated.
If use at Facebook isn't widespread I'd prefer to simply delete them.
Test Plan: none
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2274
Differential Revision: https://secure.phabricator.com/D4906
Summary: Remove all references to ArcanistLicenseLinter and ArcanistApacheLicenseLinter.
Test Plan: Rerun the linter and ensure nothing is broken.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4901
Summary:
My original idea was to return safe HTML from this function.
But we are down to 20 occurrences in Phabricator and you shouldn't need this function in safe HTML world at all.
Test Plan:
$ arc lint src/applications/audit/controller/PhabricatorAuditListController.php
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4890
Summary: Raise deprecation warnings for these methods. I won't commit this until the phutil_tag branch merges.
Test Plan: Unit tests.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4770
Summary: It's not trivial to find them inside 700+ lines long functions.
Test Plan:
Linted `reused-iterators.lint-test` renamed to `_.php`, saw other locations.
Repeated for `reused-local.lint-test`.
Repeated for `duplicate-key-in-array.lint-test`.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4871
Summary:
Previously 'arc diff X' with mercurial meant to use X as the base
to diff against. Now it means use gca(X,working directory) as the base to
diff against. This matches the git behavior.
Test Plan:
Ran 'arc diff master' on a repo where master was ahead of the feature branch.
Verified that the diff result included only the diffs in the feature branch.
Reviewers: epriestley, sid0, bos, dschleimer
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4865
Summary:
arc diff on large mercurial repos was taking 14 seconds just to get
to the commit message prompt. With these optimizations it takes 4.
- "ancestor(.) - ancestor(XYZ)" is expensive because it has to build the
entire 400000+ revision history for both. "XYZ::. - XYZ" is much cheaper
because it only looks at the revisions between XYZ and the working directory.
- "hg outgoing" has to talk to the server, which is slow. "hg log -r draft()"
gives us the same information and is much cheaper. We fall back to 'outgoing'
on older versions of mercurial.
Of the remaining 4 seconds, 2.5 are spent in 'hg status', which is a bit harder
improve.
Test Plan: Ran arc diff on our hg repo. Verified it ran faster and the diff was created.
Reviewers: epriestley, sid0, bos, dschleimer
Reviewed By: epriestley
CC: aran, Korvin, tido
Differential Revision: https://secure.phabricator.com/D4838
Summary: Makes sense after D2471.
Test Plan:
Swapped two binary files, ran `arc diff --only`.
Saw time 3.797 s instead of 4.361 s.
Changed `file.upload` to `file.uploa`, saw proper error.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4847
Summary: This is fairly confusing. Make the error message suggest the common remedy (update libphutil).
Test Plan: Eyeballed it.
Reviewers: Afaque_Hussain, btrahan, vrana
Reviewed By: Afaque_Hussain
CC: aran
Differential Revision: https://secure.phabricator.com/D4834
Summary: If provided, have `arc patch` use `authorName` / `authorEmail`. This simplifies handling and makes patches more portable between version control systems (previously, information was generated in the diff's VCS, regardless of which VCS it was being applied to).
Test Plan: Created a diff with author `derp <derp@derp.com>`, ran `arc patch --diff x`, got a local commit with that author.
Reviewers: btrahan, edward, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4827
Summary:
Record author email information in `arc diff`, so we can recreate it in `arc patch` and elsewhere without creating any kind of email exposure issues.
In Mercurial, we currently store the whole string ("username <email@domain.com>"). Make this consistent with Git.
Test Plan: Created git and hg diffs, saw authorEmail populated.
Reviewers: btrahan, edward, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4825
Summary:
We want to use it for `yield` and `invariant_violation()` which throws.
Having node instead of token would be better but this would be enough.
Test Plan: Implemented a hook in FB repo and added a test case there.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4821
Summary:
We assume `git` is available now, but should not. Specifically, if a user runs a working copy operation like `arc list` in an SVN working copy without `git` available, they get this error: P707
We interpret git errors very narrowly; be more liberal in how we interpret them. This assumes users working with `git` will have a functional `git`, but this seems like a reasonable assumption and lets us remove some error text matching code.
Test Plan: Changed `git` to `girt`, ran `arc list`, saw a reasonable exception. Changed back to `git`, saw git detected.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: svemir, aran
Differential Revision: https://secure.phabricator.com/D4804
Test Plan: Copied the code in a script, changed `phutil_passthru()` to `echo csprintf()` and ran it.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4805
Summary:
This disallows code like this:
$cmd = 'ls';
execx($cmd);
But I guess it's not that big deal?
Test Plan: Linted whole Arcanist and Phabricator codebases, most parts looks fixable.
Reviewers: epriestley
CC: nh, aran, Korvin
Differential Revision: https://secure.phabricator.com/D4794
Summary:
FB currently starts Sandcastle push before starting the diff workflow.
If `arc diff` commits something then we need to restart the push.
I want to avoid this by starting the push after commit.
Test Plan: Will test after implementing the listener.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4785
Test Plan: Didn't see a fatal in new test case.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4783
Summary: This is pretty lame but I didn't have a better idea.
Test Plan:
$ arc test # previously translated as list
$ arc lst
$ arc brnach
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4773
Summary:
Continuation of D4732 - when we don't care about loading an arcconfig,
allow that to be specified.
Test Plan: chmod -r .arcconfig; bin/arc help --skip-arcconfig
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4750
Summary: This can be useful by itself, we want to use it in FB linter.
Test Plan: This diff.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4744
Summary: Currently, we don't expose these at top level, so you can't disable coverage if your coverage is explosively broken. Expose them as passthrough arguments.
Test Plan:
- Touched a file in `arc` which triggered unit tests.
- Without `xdebug` installed:
- Ran `arc diff --preview`, `arc diff --preview --no-coverage` (both fine).
- Ran `arc diff --preview --coverage`, got exception about coverage not being available.
- Installed `xdebug`.
- Ran `arc diff --preview`, got coverage.
- Ran `arc diff --preview --coverage`, got coverage.
- Ran `arc diff --preview --no-coverage`, no coverage.
Reviewers: indiefan, btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4745
Summary:
This test currently chdir()'s into a directory which is later removed. If another test tries to run a shell script while the CWD is invalid, the shell may emit this to stderr:
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
Among other things, this can cause the XHPAST test to fail, because it detects syntax errors by examining stderr.
Instead, retore the directory.
Test Plan: Ran "arc unit --everything", which could previously fail if XHPAST ran after Bundle.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4738
Summary: Also provides an example how to build custom linter using XHPAST.
Test Plan: Added debug output to `willLintPaths()`, verified that each path is parsed only once.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4718
Summary: `git pull` may fail in git-svn after rebasing (which is a side effect of dcommit).
Test Plan:
$ git svn rebase
$ git log trunk..master
$ git pull --ff-only; echo $?
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4716
Summary: I guess this is correct? See T2387 for discussion.
Test Plan: Unit tests.
Reviewers: bos, DurhamGoode
Reviewed By: DurhamGoode
CC: aran
Maniphest Tasks: T2387
Differential Revision: https://secure.phabricator.com/D4711
Summary: Some people have 2GB+ untracked files in repo which significantly slows down this or even crashes it.
Test Plan: Added a debug output here and linted repo with untracked path.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, arudolph
Differential Revision: https://secure.phabricator.com/D4713
Summary: Fixes T2438. We currently escape everything with '@', but SVN rejects that for '.'
Test Plan:
Unit tests. Performed this commit:
$ svn st
M .
A x@123
$ arc commit --conduit-uri=http://local.aphront.com:8080/ --revision 53
Revision 'D53: asdf' has not been accepted. Commit this revision anyway?
[y/N] y
Committing 'D53: asdf'...
Sending .
Adding x@123
Transmitting file data .
Committed revision 37.
Done.
I grepped for more '@' adding but couldn't find any. It's a bit tricky to grep for though, so it's possible I missed some.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran, mbishopim3
Maniphest Tasks: T2438
Differential Revision: https://secure.phabricator.com/D4703
Test Plan: Ran PhpunitTestEngine unit test and used both test result parsers to generate test results.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, aurelijus
Differential Revision: https://secure.phabricator.com/D4676
Summary: PHPUnit 3.7 now includes user message as well.
Test Plan: Ran phpunit tests
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4662
Test Plan: Ran PhpunitTestEngine unit test. Also used refactored PhpunitTestEngine to run phpunit tests.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, aurelijus
Differential Revision: https://secure.phabricator.com/D4651
Summary:
arc land on a hg-svn repository would fail because arc land
uses 'hg push -r' to specify which revs to push which is not supported
by hg-svn. Now we just use 'hg push' which, when used against svn, only
pushes the current branch (which happens to be the branch we're trying to land).
We can't use standard 'hg push' for non-svn repos though because when used
against a vanilla hg repo 'hg push' pushes all branches.
Also remove --new-branch from 'hg push' because it's extremely
unlikely that a person wants to create a new branch on the server via
arc land.
Test Plan:
Ran arc land on a normal hg repo, verified it used 'hg push -r'.
Ran arc land on a hg-svn repo, verified it used 'hg push' and it pushed the
correct changes.
Reviewers: epriestley, sid0, dschleimer
Reviewed By: epriestley
CC: bos, aran, Korvin
Maniphest Tasks: T2403
Differential Revision: https://secure.phabricator.com/D4653
Summary:
The cache key is repository base revision and hash of all modified files.
It isn't perfect in SVN where every file might have a different revision.
It's also suboptimal as just committing or amending changes the cache key even if the files contents weren't modified.
We can improve it later, perhaps by using previous revision and files modified since it.
Test Plan:
Changed granularity of XHPAST linter to repository.
Linted the same repo twice, verified that it was read from cache the second file.
Changed a single file, verified that all files were re-linted.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4608
Summary: The main reason for this is to not exit with 1 when no paths are lintable (which is more success than failure).
Test Plan:
Returned empty array from `buildLinters()`, then:
$ arc lint
$ echo $? # 0
Reviewers: epriestley
Reviewed By: epriestley
CC: wez, aran, Korvin
Differential Revision: https://secure.phabricator.com/D4625
Summary: Currently, we get an exception on empty %Ls for `arc diff --no-ansi` or similar (see P698).
Test Plan: Ran `arc diff --no-ansi`.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4624
Test Plan: Deleted file in Git, ran `arc diff`, confirmed the question, saw the file as deleted.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4603
Summary: Fixes T2112. These are fairly common now, and are used as the storage format for `hg export` and mq in most installs.
Test Plan: Ran unit tests, used `arc patch --patch`, uploaded some diffs manually.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2112
Differential Revision: https://secure.phabricator.com/D4592
Summary: The binary may not be built, in which case this raises a warning.
Test Plan: Will make @zeeg test.
Reviewers: zeeg, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4569
Summary:
Previously, trying to arc land in a mercurial repo would
fail if the local branch was already at the tip of the onto branch
(since hg rebase exited with code 1). This change makes it check
if a rebase is needed before executing the rebase.
Test Plan:
hg init foo
cd foo
hg bookmark master
touch a && hg add a && hg commit -ma
// setup your .arcconfig
cd ..
hg clone foo foo2
cd foo2
hg bookmark mybook
touch b && hg add b && hg commit -mb
arc land --onto master --revision <your rev number>
Arc land should succeed. I also tried landing when a rebase was
necessary and it still worked.
Reviewers: epriestley, dschleimer, bos
Reviewed By: epriestley
CC: sid0, aran, Korvin
Differential Revision: https://secure.phabricator.com/D4588
Summary: Also include binary hash in the version.
Test Plan: New unit test.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4535
Summary:
A git submodule looks a lot like a normal git repo, but the .git
directory is replaced with a file that git reads to find the real
location of the git directory. When arcanist tries to write a file into
a directory inside of there, it was failing silently, and then crashing
silently when it couldn't read results back out. Instead of assuming the
git directory is a directory named .git at the toplevel of the tree, we
use the appropriate git command to get the correct git directory.
Test Plan: submit a diff from a submodule
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4482
Summary: This should be done for all external and configurable linters.
Test Plan: Linted file with lint problems, changed options, relinted.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4475
Summary:
If linter with file cache granularity stops linting then we don't run it on the same path next time.
But we still run linters with non-file cache granularity causing that they run even on the paths that would be stopped otherwise.
Test Plan:
Put global granularity linter after Generated linter.
Caused an error from this linter but in ignored path.
Verified that 'stopped' is saved in `lint-cache.json`.
Linted the same files second time, verified that the path is still skipped (wasn't before).
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4446
Summary: To have at least one real callsite.
Test Plan:
$message = new ArcanistLintMessage();
$message->setOtherLocations(array());
$message->setOtherLocations(array(array()));
$message->setOtherLocations(array(1));
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4419
Test Plan: Created function named `f_a`, manually set other location.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4412
Summary:
Some errors (duplicate declaration, invalid number of arguments) have more related places.
We need to notify user if he changes any related place.
This could be currently achieved by triggering errors instead of warnings or by including both files in the range (impossible if the locations are in different files) or by issuing multiple errors.
All options are too aggressive.
Test Plan: Issued error on unmodified line with other location on modified line.
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4392
Summary:
FB runs some linters on background and it's a magnificent hack using `ParallelLinter` (two instances), `BackgroundLinter` and `FutureLinter`.
I want to simplify this by resolving the futures in engine instead of in some virtual linter.
It also seems like a better place to do it.
It should also fix caching problems I have with them (because the virtual linters don't know about the cache at all).
Test Plan: None yet.
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4380
Summary:
Fixes T2175. Git generates patches which have "\n" line endings on every system. We currently generate patches with system-dependent line endings.
Git accepts system-dependent line endings in almost call cases, but part of the parser tests for "\n" explicitly. T2175 has an example of this.
Test Plan:
Ran `arc export --git --revision D4366 > export.git` on a Windows machine, verified "\n" line endings. Ran the same with `--unified`, verified "\r\n" line endings.
(I didn't add any unit tests for this because it's Windows-dependent and very difficult to test meaningfully right now -- i.e., test that appliable patches are generated -- since the git reconstitution test doesn't run on Windows either, because we can't yet untar things there.)
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2175
Differential Revision: https://secure.phabricator.com/D4373
Summary:
D4186 added an "svn status --xml x y" form to getSVNStatus(), but the parser doesn't work for multiple files, since we get multiple <target /> elements in the XML output. So, curently, `arc diff` works (one target, all files) and `arc diff x` works (one target, x) but `arc diff x y` does not (more than one target, hits the exception).
$ arc diff QUACK2 QUACK3
Exception
Expected exactly one XML status target.
Test Plan: Ran `arc diff QUACK2 QUACK3` in a working copy with modified QUACK2, QUACK3. Ran `arc diff`; `arc diff QUACK2`.
Reviewers: vrana, btrahan, codeblock, JThramer
Reviewed By: codeblock
CC: aran
Differential Revision: https://secure.phabricator.com/D4372
Summary: Ref T2296. This error is unreachable right now -- when I fixed all the "\r\n" stuff, we always end up with a nonempty first line for an empty input. Do this test earlier and more explicitly. This results in a less useful error: "expected (some junk) on line 1" instead of "can't parse an empty diff".
Test Plan: Tried to parse an empty diff, got a "you can't parse an empty diff" error.
Reviewers: btrahan, vrana, codeblock
Reviewed By: codeblock
CC: aran
Maniphest Tasks: T2296
Differential Revision: https://secure.phabricator.com/D4370
Summary: Add a comma because it was going to annoy the crap out of me.
Test Plan: See the comma. :)
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4365
Summary: We want to use TYPE_DIFF_DIDBUILDMESSAGE to abort arc diff when a message doesn't fit some
Test Plan: Created an EventListener subscribed to TYPE_DIFF_DIDBUILDMESSAGE, validated the 'message' field was filled in
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D4361
Summary: This fix lets you run arc lint from any directory in the repository
Test Plan: Ran arc lint from any directory
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4356
Summary:
Currently, this spawns 125 concurrent processes on my machine, which overflows some limit and gives me an error:
PHP Warning: proc_open(): unable to create pipe Too many open files in /INSECURE/devtools/libphutil/src/future/exec/ExecFuture.php on line 491
Instead, limit parallelism to 16. The runtime is approximately the same for me, and dominated by other concerns (conduit calls).
Test Plan: Ran `arc branch` successfully. Ran `arc branch --trace`, observed behavior.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4336
Summary:
Lints cpp code using the cppcheck static linter. This linter needs to
be downloaded and built from http://cppcheck.sourceforge.net/
Test Plan: Used it on a few files.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4353
Summary: Adds arc lint support for cpp files with Google's cpplint.py lint checking.
Test Plan: ran it on some cpp files. Added unit tests
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4344
Summary: see title
Test Plan: ran arc install-certificate <uri> in a directory without an .arcconfig and it worked! ran arc install-certificate in a directory with an .arcconfig and it worked! ran arc install-certificate <uri> in a directory with an .arcconfig and noted it correctly overrode the .arcconfig
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2251
Differential Revision: https://secure.phabricator.com/D4332
Summary:
I type "arc brnach" about 300 times per day.
- Allow arc commands to be specified by unique prefix ("exp" for "export", "lib" for "liberate").
- Allow arc commands to be specified by unique levenshtein edit distance <= 2 ("brnach" for "branch", "halp" for "help", "ptach" for "patch").
- Reorganize code out of "arcanist.php".
I think this will be uncontentious because arc commands are rarely destructive, but if people complain we can either require certain commands be typed exactly (maybe "land"?) or allow this feature to be disabled in configuration.
Test Plan:
$ arc br
Usage Exception: Unknown command 'br'. Try 'arc help'.
Did you mean:
branch
browse
$ arc brnachh
Usage Exception: Unknown command 'brnachh'. Try 'arc help'.
$ arc brnach
(Assuming 'brnach' is the British spelling of 'branch'.)
doc-security No Revision security
sms Needs Revision D319: Add SMS support to Phabricator
phxtag No Revision derp
arantag No Revision derp
...
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4305
Summary: flake8 is the better maintained combination of pep8 and pyflakes
Test Plan: There's a test!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, jack
Differential Revision: https://secure.phabricator.com/D4082
Summary:
Fixes T2138.
- When a pull fails, restore the original branch.
- When a push fails, complain about it really loudly.
NOTE: No test plan for push yet since I'm not sure this is the right remedy, see T2138 for discsusion.
Test Plan:
- Tested pull by changing "git pull" to "git xxpull" and running "arc land". Saw the pull fail and my original branch restored.
Reviewers: vrana, aran
Reviewed By: vrana
Maniphest Tasks: T2138
Differential Revision: https://secure.phabricator.com/D4265
Summary: If you are explicit then there is no need to ask you.
Test Plan:
$ touch a
$ arc diff
$ arc diff a
$ arc diff existing
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4186
Summary:
Recently, in D4097 or one of the precursors I refactored this. However, when $rev is null parseBaseCommitArgument() throws ("This VCS does not support commit ranges."). Shield the call so it only happens if if $rev is nonempty (we still want to make the call, so "arc lint --rev x" on SVN will throw and inform the user that "--rev" is incorrect usage).
(@vrana, this was reported by FB and might be worth pushing.)
Test Plan: Ran "arc diff --preview <path>". Grepped for other parseBaseCommitArgument() callsites and verified they don't have similar issues.
Reviewers: vrana, btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D4241
Summary: I don't know how to not be strict here plus we (Arcanist developers) don't have access to user's error log.
Test Plan:
Undeclared `ArcanistDiffWorkflow::$console`, then:
$ arc diff
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3607
Summary:
The main added value is loading the branch name from revision.
Sometimes I know the revision ID but I don't know the branch name.
The missing piece is the starting point of the branch.
I was thinking about using `arc.land.onto.default` but we also need to get 'origin'.
This is also the last step of a simple workflow where underlying VCS is not abstracted away.
In future, we can implement this for other APIs.
Test Plan:
$ arc branch new_branch
$ arc branch new_branch
$ arc branch D4168
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4170
Summary: After D4191 this is a fatal.
Test Plan: Created this revision.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D4219
Summary: Adds "arc unit --everything", which runs every available test, provided the test engine supports it. Also add JSON output.
Test Plan: Ran `arc unit --everything` in arcanist/, libphutil/ and phabricator/. Saw all tests run.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2065
Differential Revision: https://secure.phabricator.com/D4214
Summary:
See D4049, D4096.
- Move commit range storage from Mercurial and Git APIs to the base API.
- Move caching up to the base level.
- Store symbolic name and resolved name separately, so we can re-resolve the correct commit from the symbolic name after dirtying caches.
- Rename `supportsRelativeLocalCommit()` to `supportsCommitRanges()` (old name wasn't very good, and not consistent with new terminology like the `--base` flag).
- Rename `getRelativeCommit()` and `setRelativeCommit()` to `getBaseCommit()` and `setBaseCommit()`.
- Introduce `reloadCommitRange()` and call it from `reloadWorkingCopy()`.
I think this fixes the problem in D4049, and provides a general solution for the class of problems we're running into here, with D4096. Specifically:
- We no longer get dirty caches, as long as you call reloadWorkingCopy() after changing the working copy (or call a method which calls it for you).
- We no longer get order-of-parsing-things problems, because setBaseCommit() reloads the appropriate caches.
- We no longer get nasty effects from calling `requireCleanWorkingCopy()` too early.
Test Plan: This is pretty far-reaching and hard to test. Unit tests; ran various arc commands. :/
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4097
Summary:
This method is used in three cases:
# For unit tests, to set the range to 'HEAD^' or '.^' in an agnostic way.
# For "amend", to set the range to the commit to be amended (also 'HEAD^' or '.^').
# For "patch" and "upgrade" so we don't fail just because there's an invalid "base" rule somewhere in the config when doing clean-working-copy tests.
For cases (1) and (2), introduce an "arc:this" rule to mean "the current commit". For case (3), remove the call; it is no longer necessary to check the commit range in order to do tests for the working copy state after D4095.
Test Plan: Ran unit tests, "arc upgrade", "arc patch", "arc amend".
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4096
Summary:
See discussion in D4049.
The getWorkingCopyStatus() method gets called from requireCleanWorkingCopy() in a lot of places, which triggers resolution of the base of the commit range. This is unnecessary; we do not need to examine the base commit in order to determine whether the working copy is dirty or not. This causes problems, in D4049 and elsewhere (we currently have a lot of fluff calls to setDefaultBaseCommit() in workflows which need to call requireCleanWorkingCopy() but do not ever use commit ranges, such as `arc patch`). This is mostly an artifact of SVN, where the "commit range" and "uncommitted stuff in the working copy" are always the same.
- Split the method into two status methods: getUncommittedStatus() (uncommitted stuff in the working copy, required by requireCleanWorkingCopy()) and getCommitRangeStatus() (committed stuff in the commit range).
- Lift caching out of the implementations into the base class.
- Dirty the cache after we commit.
This doesn't do anything useful on its own and creates one caching problem (`commitRangeStatusCache` is not invalidated when the commit range changes because of `setBaseCommit()` or similar) but I wanted to break things apart here. I won't land it until there's a more complete picture.
This creates a minor performance regression in git and hg (we run less stuff in parallel than previously) but all the commands should be disk-bound anyway and the regression should be minor. It prevents a larger regression in `hg` in D4049, and lets us do less work to arrive at common error states (dirty working copy). We can examine perf at the end of this change sequence.
Test Plan: Ran unit tests, various `arc` commands.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4095
Summary:
This allows using new methods without the need for bumping version number.
The usage is not neccessary because we already bumped the version number for this but I wanted to have a callsite.
Test Plan:
Made a typo in method name, then:
$ arc lint --only-new 1
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4193
Summary:
This changes arc land's hg support to allow you to land a branch or bookmark that has nested branches/bookmarks. Example:
// Initial state:
// -a--------b master
// \
// w--x mybranch
// \--y subbranch1
// \--z subbranch2
//
// arc land --branch mybranch --onto master :
// -a--b--wx master
// \--y subbranch1
// \--z subbranch2
Test Plan:
Created several repos like in the summary and ran 'arc land' and 'arc land --keep-branch'. Did this with both bookmarks and named branches. Scenarios tested:
- mybranch having no child commits
- mybranch having a child branch with several commits
- mybranch having two child branches
- mybranch having a child branch which has two more child branches
No code was added outside of a "if ($this->isHg)" so I didn't run git arc land.
Reviewers: epriestley, dschleimer, bos, sid0
Reviewed By: dschleimer
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4089
Summary:
See chatlog from https://secure.phabricator.com/chatlog/channel/%23phabricator/?at=37257
Basically, the install's developers sometimes use "git merge master" instead of "git rebase master" to pull changes from master into their branch. When we run "git rebase master" at the end, this creates a lot of conflicts.
Instead, optionally run "git merge master". This should be equivalent in our case (where we always rebase) and much better in their case (where they sometimes merge).
We're both going to use it for a bit and see if it creates problems. If it improves the "sometimes-merge" workflow without affecting the "always rebase" workflow, we can make it a default. If it improves theirs but damages ours, we can keep it a flag/option. If it's just terrible, we can figure out something else.
Test Plan:
Ran `arc land --mergeup --trace <feature> --keep-branch --hold`, see P624 for output. Observed merge update strategy and general success.
Also verified the conflict:
$ arc land --mergeup --merge
Usage Exception: Arguments '--mergeup' and '--merge' are mutually exclusive: The --merge strategy does not update the feature branch.
Reviewers: btrahan, vrana, DurhamGoode
Reviewed By: btrahan
CC: aran, keir
Differential Revision: https://secure.phabricator.com/D4080
Test Plan: Added a debug output there and ran.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4147
Summary:
arc browse will open a browser to the Diffusion view of a file. Convenient if you like
Diffusion for reading source. Naturally, it fixes relative filenames.
Combined with git-grep it can be an easy replacement for server-side search functions.
Test Plan:
use feature with and without 'browser' configured.
I've only tested this on Linux, because that's all I have right now, but the principle is sound.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4127
Test Plan: Will test it by closing this revision.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4122
Summary:
Fixes the exception:
Exception
Command 'git commit -a --author=Whatever Long Name <whatever@email.com> -F -' failed with error #1
Test Plan: Tested with full git name
Reviewers: epriestley, aurelijus
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3979
Summary:
Allow authors to publish a new or updated revision to Phabricator
without requesting code reviews. The revision will have status
"Needs Revision" instead of "Needs Review".
In order to avoid a change of Conduit API, this is done by adding
a comment with the "plan changes" action immediately after the
revision is published.
Test Plan:
Using my local repository, run "./bin/arc diff --plan-changes"
Check the resulting diff in Phabricator.
Reviewers: vrana
Reviewed By: vrana
CC: aran, epriestley
Maniphest Tasks: T2024
Differential Revision: https://secure.phabricator.com/D4084
Summary:
If you run `arc diff` in a repository which:
- has uncommitted or untracked changes; and
- has a .arcconfig with a never-before-seen project ID;
- we fatal: http://pastebin.com/raw.php?i=ykpfr4MT
This patch is a bit iffy, open to alternatives. The "right" patch is probably an `arcanistproject.query` which behaves more sensibly.
I return array() directly since we'll later create the project.
Test Plan: Ran `arc diff` in a repository with untracked files or uncommitted changes and a new project ID.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4057
Summary: Should have been part of D3934.
Test Plan:
$ arc diff
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4076
Summary:
Makes arc land support hg repositories. Both bookmarks and named branches can be landed. For the most part all the arc land options work, but there are a few caveats:
- bookmarks can only be landed on bookmarks
- branches can only be landed on branches
- landing a named branch with --merge creates a commit to close the branch before the merge.
- since mercurial doesn't start with a default master bookmark, landing a bookmark requires specifying --onto or setting arc.land.onto.default
Test Plan:
Tested arc land with all permutations of --merge, --keep-branch on both bookmark branches and named branches. Also tested --hold, --revision, --onto, --remote.
See https://secure.phabricator.com/P619
Also tested git arc land with --merge and --keep-branch.
Reviewers: dschleimer, sid0, epriestley, bos
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4068
Summary:
See discussion in D4056. In `findRevision()` we call `loadWorkingCopyDifferentialRevisions()`. However, this method depends upon the state of the working copy, because the end of the commit range it examines is HEAD. Prior to D4056 we checked out the target branch before calling `findRevision()`; after D4056 we call it earlier.
This isn't problematic in the `arc land` case, but in the `arc land <branch>` case it means we may fail to identify a revision, or identify the wrong revision, because HEAD isn't where we expect it to be.
Instead, unconditionally check out the target branch before finding the revision.
See <http://dl.dropbox.com/u/116385/Slingshot/Pictures/Screen%20Shot%202012-12-03%20at%203.43.45%20PM.png> for a transcript of the issue.
Test Plan: Reproduced issue as per link above. Ran `arc land --keep-branch --hold somebranch` successfully after this patch.
Reviewers: DurhamGoode, zeeg
Reviewed By: DurhamGoode
CC: aran
Differential Revision: https://secure.phabricator.com/D4072
Summary:
We can add `GRANULARITY_DIRECTORY` and `GRANULARITY_REPOSITORY` later.
Repository granularity may use current commit + changes.
Directory would need to use hashes of all files in dir which would be quite expensive.
Test Plan:
$ echo '<?php class A extends B {}' > A.php
$ arc lint --cache 1
$ arc lint --cache 1
$ echo '<?php class B {}' > B.php
$ arc lint --cache 1
$ arc lint --cache 1
$ rm B.php
$ arc lint --cache 1
$ arc lint --cache 1
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4021
Summary:
This was causing the following error in environments that didnt have scala configured:
Some linters failed:
- ArcanistScalaSBTLinter: ArcanistUsageException: This directory does not appear to be maintained by SBT, as we can't seem to find a working build file (project/Build.scala or build.sbt).
Test Plan: .
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4070
Summary:
Refactor the arc land code into several
functions so it's easier to maintain. This is in
preparation for adding hg support to arc land
in my next commit.
Without this refactor, adding hg support makes the run()
function too big.
Test Plan:
Set up a git repo and clone with a branch scenario.
Example: https://secure.phabricator.com/P614
Ran and verified:
arc land
arc land --keep-branch
arc land --merge
arc land --merge --keep-branch
arc land --hold
arc land --revision <another phabricator rev>
Reviewers: epriestley
Reviewed By: epriestley
CC: dschleimer, sid0, aran, Korvin
Differential Revision: https://secure.phabricator.com/D4056
Summary:
SBT is the most common Scala buildsystem. This adds an extremely basic and
slightly horrible linter to check SBT's output for warnings and errors.
Test Plan:
Tested this with a Scala project I've been working on for some time.
It seemed relatively sane.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4064
Summary: I plan to use it in `save_lint.php`.
Test Plan:
$api->getUnderlyingWorkingCopyRevision(); // In Git SVN repo
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4054
Summary: `svn info` is the slowest command for discovering repository (up to 300 ms) and Subversion is probably the least used repository type with Arcanist. Let's discover it last.
Test Plan:
$ arc lint --trace
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4039
Summary:
- Rename some very old variables.
- Wrap some contributed lines.
Test Plan: `arc lint` / `arc unit`. Viewed a diff in an uncacheable mode to verify intraline behavior.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4018
Summary:
Let's try this.
It may be useful to see this together in Differential overview.
Test Plan: Linted a file with TODO.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T744
Differential Revision: https://secure.phabricator.com/D4014
Summary:
There is one big decision: How to get linters version.
I've created `getCacheVersion()` which is supposed to be bumped every time engine or any linter is changed.
This is not very nice but the other alternative (detect this automatically) seems worse:
- The engine may be outside repo and may or may not be under version control so getting its version through something like `git log` may not be even possible.
- If it is in the same repo then every rebase will obsolete the whole cache.
Even though bumping the version manually is PITA I still think it's a better solution.
Test Plan:
$ time arc lint --cache 1
# verified file
$ arc arc lint --cache 1
# added some debug output to see the cached results
# also observed better time (.57 s instead of 2.19 s)
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2036
Differential Revision: https://secure.phabricator.com/D4006
Summary: Also delete extra newlines.
Test Plan:
$ arc diff # on top of my commit
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2025
Differential Revision: https://secure.phabricator.com/D3996
Summary: pragmatism wins the day, though I think eventually we might want something really fancy to deal with arcanist and conduit not being up to date with respect to one another
Test Plan: php -l
Reviewers: epriestley
Reviewed By: epriestley
CC: zeeg, aran, Korvin
Maniphest Tasks: T2088
Differential Revision: https://secure.phabricator.com/D3988
Summary:
Some users want be stopped even if there are lint advices.
NOTE: Deleted by D3364.
Test Plan:
On diff with lint advice:
$ arc diff --preview # advice just printed
$ arc diff --preview --advice # excuse required
Reviewers: epriestley
Reviewed By: epriestley
CC: akramer, aran, Korvin
Differential Revision: https://secure.phabricator.com/D3982
Summary:
There's quite some logic in here:
- It automatically decides whether to create a new commit or amend.
- It partially respects 'default-relative-commit'.
- However if it points to a closed revision then it creates a new commit.
Resolves T2025.
Test Plan:
`arc diff` on:
- Clean committed repository.
- Dirty repository without commit since 'default-relative-commit'.
- Dirty repository with non-revision commit since 'default-relative-commit'.
- Dirty repository with revision commit since 'default-relative-commit'.
- `arc diff HEAD^` on dirty repository on top of closed revision.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2025
Differential Revision: https://secure.phabricator.com/D3967
Summary: See D3963. Instead, parse these diffs so they'll work with `--raw`, etc.
Test Plan:
Generated a failing diff, added it as a test case. Fixed issue. Ran test suite. Ran `arc` against it:
$ git -c diff.suppress-blank-empty=true diff HEAD | arc diff --raw --only --conduit-uri=http://local.aphront.com:8080/
Reading diff from stdin...
Created a new Differential diff:
Diff URI: http://local.aphront.com:8080/differential/diff/103/
Included changes:
M things
Reviewers: vrana, jiiix, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3969
Summary:
accommodate git's diff.suppress-blank-empty=true setting
Without this change, if you were to set diff.suppress-blank-empty=true
in your .gitconfig (as I do), then "arc diff" would always fail with the
cryptic diagnostic, "Diff Parse Exception: Found the wrong number of
hunk lines."
Test Plan:
Put this in ~/.gitconfig or .git/config
[diff]
suppress-blank-empty = true
and run "arc lint". It should pass. Without this chnage,
it would fail as described above.
Reviewers: vrana, epriestley
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3963
Summary: assumes D3917 (or something like it that populates 'author' value from conduit call) exists in production
Test Plan: stubbed out 'author' value and verified checkins as author worked
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T479
Differential Revision: https://secure.phabricator.com/D3918
Summary:
The variable $old_phid was not being set in a certain situation in
buildBinaryChange(), and that was causing the following error, during
`arc patch <revision>`:
"the patch applies to <file> (<hash>), which does not match the
current contents."
and hence it was failing to download/apply the patch.
Signed-off-by: Sergio Correia <sergio@correia.cc>
Test Plan:
I spotted the problem in a revision where I was renaming
some images, which are binary.
Reviewers: epriestley, vrana, btrahan
Reviewed By: btrahan
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3925
Summary:
Run `hg status` as a Future while getting the diff. Add a cache for
getRawDiffText().
Test Plan:
Run `arc lint --trace` on a HG repo and confirm that `diff` is only called once
and `status` is run in the background.
Reviewers: epriestley
Reviewed By: epriestley
CC: yliang, dpepper, aran, Korvin
Maniphest Tasks: T2016
Differential Revision: https://secure.phabricator.com/D3913
Summary:
Installations extend this.
Another solution would be to extend `ArcanistLinterTestCase` from `ArcanistArcanistLinterTestCase` and return null in `getLink()` to avoid code duplication but I prefer clean class hierarchy.
Test Plan:
$ arc unit
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3878
Summary:
It's inside `.git/` for some time.
It also ignored changes in `test.arc/`.
Test Plan: None.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3900
Summary:
When we hit a diff which is missing file context, we try to pull it synthetically later. This works for moves and copies, but currently fails for property changes. Since it failed, we didn't have context, so we'd try to pull it again...
The general problem this creates is that when you mark a file "+x" without changing it, we can't show you the content in Differential. Not a huge deal. In some future diff, I'll build the content synthetically.
Adds commits to cover this behavior:
commit 1830a13adf764b55743f7edc6066451898d8ffa4
Author: epriestley <git@epriestley.com>
Date: Tue Nov 6 17:11:18 2012 -0800
Mark koan2 +x and edit it.
commit 8ecc728bcc9b482a9a91527ea471b04fc1a025cf
Author: epriestley <git@epriestley.com>
Date: Tue Nov 6 17:08:44 2012 -0800
Move 'text' to 'executable' and mark it +x.
commit 39c8e7dd3914edff087a6214f0cd996ad08e5b3d
Author: epriestley <git@epriestley.com>
Date: Tue Nov 6 16:36:59 2012 -0800
Mark koan as +x.
Test Plan: Ran unit tests. Previously, they looped indefinitely. Now, they pass.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3909
Test Plan:
$ arc lint a.py # with too long line
Reviewers: zeeg, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3882
Summary: Maybe I will need it on other places.
Test Plan:
$ arc lint --output json # on file with lint error
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3898
Summary:
Makes lots of noise:
{F22758}
Test Plan:
Linted file with several bad characters per line.
Linted file with one bad character per line.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3896
Summary: We could also inject the value from the test case config but this is simpler.
Test Plan:
$ arc unit src/lint/linter/ArcanistLicenseLinter.php
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3895
Summary: None of these are that serious that I would like to be informed about them on unmodified lines.
Test Plan: Linted Python file with lots of PEP8 errors, now warnings.
Reviewers: zeeg, epriestley
Reviewed By: zeeg
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3884
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in unit tests and LICENSE file.
Reviewers: epriestley, btrahan, edward
Reviewed By: epriestley
CC: aran, Korvin, davidrecordon
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3881
Summary: fix for T2011, first option in list of possible fixes
Test Plan: ...do I really have to setup mercurial with mq? :D
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2011
Differential Revision: https://secure.phabricator.com/D3869
Summary: I broke this in D3750. Calling `getRepositoryAPI()` triggers a check for workflow requirement of the repository API. Instead, we should just check if we alreayd have one.
Test Plan: Ran `cat x | arc diff --raw`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1998
Differential Revision: https://secure.phabricator.com/D3848
Summary: turns out retina has files like image.png and image@2x.png. The latter breaks since '@' is a special command telling svn to "look for image at revision 2x.png" -- nonsensical garbage. If we add it to the end every time this error goes way.
Test Plan: touch 2@2.png; svn add '2@2@'; arc diff; <fill out form, accept commit>; arc commit -- observe commit working
Reviewers: epriestley
Reviewed By: epriestley
CC: mbishopim3, aran, Korvin
Maniphest Tasks: T1999
Differential Revision: https://secure.phabricator.com/D3845
Summary:
D3748 attempted to improve the behavior of `arc diff` when dealing with files merged from another branch, but had the side effect of marking all normal edits and deletes as adds. Revert this side effect, at least. This likely degrades the merging case, but it's comparatively rare, and editing/deleting files is very common.
I'll make an effort to fix this properly (and back it with DirectoryFixture tests) when I deal with T1947.
Test Plan: Ran `arc diff --preview` for a change that edits or removes files.
Reviewers: btrahan, vrana, svemir
Reviewed By: svemir
CC: aran
Differential Revision: https://secure.phabricator.com/D3836
Summary:
Some users assume they can update anything, not just revisions they own (see https://github.com/facebook/arcanist/issues/54).
Currently, if you `arc patch` or `arc amend` and get a commit message, then `arc diff` for a revision you don't own, we:
- Fail early with a very confusing message ("You can not review a revision you own!") if you are on the "Reviewers" line, until D3820.
- Or fail very very late with a good error message, but after lint, unit and update messages.
Instead, check that you own the revision as early as we can.
Test Plan: Tried to update revisions I didn't own, got good error messages early on (with D3820).
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3821
Summary:
See T1973. In T1675, we addressed parsing of diffs with `--no-prefix` or custom `--src-prefix` and `--dst-prefix` flags. However, this inadvetently broke diffing of files with spaces in their names, which Git does not quote. They look like this normally:
diff --git a/old file b/new file
Prior to D3744, we accidentally got this right by looking for the `a/` and `b/`. However, we no longer do, and instead produce nonsense results.
This problem is difficult because for files with spaces, `git diff --no-prefix` may generate an ambiguous line like:
diff --git a b c d e f g
From this line, we have no way to deterine if this moves "a" to "b c d e f g", or "a b c d" to "e f g", or anything in between. In some diffs we have more information later on, but in some cases we do not, e.g. for binary diffs without `--binary`.
Try to get this right in as many cases as possible:
- If there are quotes, we can unambiguously get it right. This only happens for filenames with quotes or unicode characters, however.
- If there is exactly one space, we can unambiguously get it right.
- Interpret the common case of `a/<anything> b/<anything>` in the most-likely-correct way again.
- Interpret the rare case of `<anything> <that same thing>` in the most-likely-correct way.
- Complain about any `a b c d e f g` garbage.
Test Plan: Ran unit tests. Created a diff of a file called "File With Spaces".
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran, ReturnZero
Maniphest Tasks: T1973
Differential Revision: https://secure.phabricator.com/D3818
Summary: This is a BC break but it was introduced recently.
Test Plan:
$ arc unit x
No more:
> Fatal error: Argument 2 passed to ArcanistConfiguration::didAbortWorkflow() must be an instance of ArcanistBaseWorkflow, null given
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3812
Test Plan: Made lint error, slept in test, verified that tests are finished when I confirm `arc diff --excuse`.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3803
Summary: This diff obsoletes D3385.
Test Plan: Made lint error, explained it, verified that unit already finished before I finished explaining (by adding `sleep(3)` to test).
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3786
Summary:
We start Sandcastle push when `arc diff` starts.
If `arc diff` throws then HHVM waits for finishing the futures.
We need to kill them sooner.
Test Plan: Will implement the hook.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3713
Summary: Currently, a shutdown exception ("script exited with open transactions!") overwhelms the actual test failure exception, which is the one that needs to be fixed.
Test Plan: Ran a fixture test which opens a transaction and then throws. Got diagnostically useful output after this patch.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3780
Summary: We need to tweak a few patterns to accommodate the possibility that lines end in "\r\n".
Test Plan: Added failing unit test and made it pass.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran, mbishopim3
Maniphest Tasks: T1944
Differential Revision: https://secure.phabricator.com/D3772
Summary: The way we represent some move/copy stuff is a bit messed up, but it mostly works, so add coverage before I mess with it.
Test Plan: Ran unit tests.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T866
Differential Revision: https://secure.phabricator.com/D3752
Summary:
We have coverage for generating patches, applying them, and making sure they reproduce the original repository state. However:
- The code uses simplified patch generation which omits some flags like `-M` and `-C`, and generally produces less rich patches than we really produce. Instead, produce patches the same way `arc diff` does.
- We don't test the intermediate change representation. In theory it's not too important because if we get it wrong the output should be wrong, but in practice it makes it easier to nail down issues. We can also generate less-rich patches which still apply correctly, but would prefer not to.
- Similarly, we don't test the intermediate patch representation. This is almost entirely redundant with simply applying the patch, but easier to visualize.
Add coverage for all that stuff and fix some bugs with `-M` / `-C` patch generation that weren't caught under the simpler patch generation.
Test Plan: Ran unit tests.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T866
Differential Revision: https://secure.phabricator.com/D3751
Summary: Make this harder to get wrong. Instead of requiring a separate call for synthetic data, automatically load it if we can.
Test Plan: Unit tests; `arc diff`.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T866
Differential Revision: https://secure.phabricator.com/D3750
Summary: This information may be quite useful.
Test Plan: Threw exception from license linter.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3764
Summary:
This code is much more readable to me.
It should also be faster as building the array at once should be faster than one by one.
Test Plan: Made license and XHPAST errors in PHP file, made spelling error in JS file.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3758
Summary:
- I caused $parser to be reused in D3732 which I belived was safe, but actually isn't. We end up writing to the same changes. We should make it safe but there's some mess in Phabricator that needs to be cleaned up first.
- One minor error code thing, variable is undefined.
Test Plan: Ran `arc export --git` on a moved file, got a better result. Ran some command which made me hit the other case and didn't get a fatal anymore.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D3749
Summary:
Currently, ArcanisSingleLintEngine lints deleted paths and directories. These are sometimes appropriate, but SingleLintEngine is a less-sophisticated linter and should have more safe defaults.
Also fix an error where JSHint reported useless messages on failure.
Test Plan:
Reproduced the problem:
$ git show
commit d71efe2b13770c8861bcd3415c15503fc377339f
Author: epriestley <git@epriestley.com>
Date: Fri Oct 19 12:22:50 2012 -0700
WIP
diff --git a/test.js b/test.js
deleted file mode 100644
index 8bd6648..0000000
--- a/test.js
+++ /dev/null
@@ -1 +0,0 @@
-asdf
$ arc set-config --local lint.engine.single.linter ArcanistJSHintLinter
Set key 'lint.engine.single.linter' = "ArcanistJSHintLinter" in local config (was null).
$ arc lint --engine ArcanistSingleLintEngine --rev HEAD^
Usage Exception: JSHint returned output we can't parse. Check that your JSHint installation.
Output:
Applied the error message fix:
$ arc lint --engine ArcanistSingleLintEngine --rev HEAD^
Usage Exception: JSHint returned unparseable output.
stdout:
stderr:
node.js:181
throw e; // process.nextTick error, or 'error' event on first tick
^
Error: ENOENT, No such file or directory '/INSECURE/repos/git-working-copy/test.js'
at Object.statSync (fs.js:400:18)
at _collect (/usr/lib/node_modules/jshint/lib/hint.js:77:12)
at /usr/lib/node_modules/jshint/lib/hint.js:93:13
at Array.forEach (native)
at Object.hint (/usr/lib/node_modules/jshint/lib/hint.js:92:17)
at Object.interpret (/usr/lib/node_modules/jshint/lib/cli.js:137:21)
at Object.<anonymous> (/usr/lib/node_modules/jshint/bin/hint:2:25)
at Module._compile (module.js:420:26)
at Object..js (module.js:426:10)
at Module.load (module.js:336:31)
Applied the remove paths fix:
$ arc lint --engine ArcanistSingleLintEngine --rev HEAD^
Usage Exception: No paths are lintable.
Reviewers: magazovski, btrahan, vrana
Reviewed By: btrahan
CC: aran, Korvin, vissi
Differential Revision: https://secure.phabricator.com/D3735
Summary:
When some linter throws then we don't print any result.
This is bad in case when the linter threw e.g. because of syntax error in some file which some other linter will tell us about.
Test Plan: Threw from a linter, made lint error in a file, saw error then exception.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3756
Summary:
After a reintegration merge, "Copied From URL" will be different and current approach will result in a wrong path. If the path does not match, just mark it as a new file.
moved the comment before if so lines stay at 80 chars
Test Plan: in trunk, svn merge --reintegrate ^/branches/foo and arc diff - without this change it will say "Copied from es/foo/..."
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3748
Summary: See T1675 for discussion. We currently strip `[abicwo12]/` from Git patches, but the user can provide arbitrary prefixes with `--src-prefix` and `--dst-prefix`, or strip prefixes entirely with `--no-prefix`. In these cases, trust they know what they're doing rather than rejecting the diff.
Test Plan: Added a bunch of tests. We have existing tests for `diff.mnemonicprefix` and normal prefixes.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1675
Differential Revision: https://secure.phabricator.com/D3744
Summary:
This is horrible and git specific, but fixes a case where people are using "arc
patch --nobranch ..." when they're not currently on a branch.
The old code assumed you were on a branch and used getBranchName() to record
this, in order to return to that branch later and cherry-pick the patch.
When not on a branch, and using arc patch --nobranch, this was trying to return
to the branch '(no branch)'.
Now, I detect that we're not on a branch and just record what HEAD is instead.
Test Plan:
Checkout the SHA of master (so I'm on master, but not on a branch) then try to
patch it with a feature diff:
€ git checkout e7a3ec68159d6847372cab5ad913f2f15aa7c249
Warning: you are leaving 1 commit behind, not connected to
any of your branches:
ac1ad39 Updating a-file
If you want to keep them by creating a new branch, this may be a good time
to do so with:
git branch new_branch_name ac1ad392350a51edd10343f12b9713f5e5b3707c
HEAD is now at e7a3ec6... Fix arcconfig
€ arc patch --nobranch D7
Created and checked out branch arcpatch-D7.
OKAY Successfully committed patch.
€ git branch
* (no branch)
feature
haddock
master
€ git log --oneline | head -2
38c0235 Updating a-file
e7a3ec6 Fix arcconfig
Reviewers: vrana, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3743
Summary: This also changes how we treat `@generated` and `@nolint` - after this diff, we will still lint their path.
Test Plan:
Created directory `a.php` and symlink `b.php` pointing to directory.
`arc lint` previously printed:
> Requested path `/data/users/jakubv/devtools/arcanist/_.php' is not a file.
Now it prints:
> No lint warnings.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3737
Summary:
We need to run new Arcanist over old code in Perflab.
We also need to run new Arcanist over new code (with already deleted custom `buildAllWorkflows()`).
This will work because old code overwrites `buildAllWorkflows()`.
Test Plan:
$ arc help
$ arc help # after deleting getWorkflowName() from one workflow
Reviewers: edward, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3741
Summary:
Currently, adding a new workflow requires you to override ArcanistConfiguration, which is messy. Instead, just load everything that extends ArcanistBaseWorkflow.
Remove all the rules tying workflow names to class names through arcane incantations.
This has a very small performance cost in that we need to load every Workflow class every time now, but we don't hit __init__ and such anymore and it was pretty negligible on my machine (98ms vs 104ms or something).
Test Plan: Ran "arc help", "arc which", "arc diff", etc.
Reviewers: edward, vrana, btrahan
Reviewed By: edward
CC: aran, zeeg
Differential Revision: https://secure.phabricator.com/D3691
Summary:
This changes what --nobranch does, though not what it means. In git, the patch
is applied to the git commit it is based off where it will commit cleanly, and
if you specify --nobranch then arc-patch will then switch back to your original
branch and try to cherry-pick the commit there.
If this fails, you end up with merge-conflict markers in the file which can be
handy.
Test Plan: https://secure.phabricator.com/P572
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3712
Summary:
We currently pull message from Conduit twice in `arc diff` update.
Once in `buildCommitMessage()` and once in `buildRevisionFromCommitMessage()`.
Remeber that we already pulled it (and so it is authoritative) to save this call.
Even faster solution would be to not pull and update the message at all in common (non-`--edit`, non-`--verbatim` and such) update workflows but it's more involved.
Test Plan:
$ arc diff --trace
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3716
Summary: We want to use them in event.
Test Plan: Will use it in event.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3690
Summary:
I was thinking about creating a method `differential.setdiffproperties` updating all properties at once or adding 'properties' to `differential.creatediff` (better) but it will require bumping Conduit version.
This looks simpler and with similar effect.
We could postpone resolving properties more but I don't want to risk not resolving them after an error.
Test Plan:
This diff for that it works.
Benchmark: 0.55 s before, 0.25 s after (with three properties, the difference will be bigger with more).
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3689
Summary:
The 'review its own revision' check is now handled by Differential (bug T1879)
Previous behavior:
arc threw an "You can not be a reviewer for your own revision." exception
if an users adds itself as reviewer, even when this configuration is
allowed on the Differential remote install's configuration.
New behavior:
Arc doesn't check that anymore. It still will be checked by the server.
Test Plan: Tested locally pushing revisions with "arc diff" to a Phabricator server with differential.allow-self-accept at true or false with myself or not as reviewer.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1879
Differential Revision: https://secure.phabricator.com/D3674
Test Plan: A lot of spew before. Not so much now.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3681
Summary:
Hunk may be missing newline at end of file. It produces exports like this:
lang=diff
--- a/third-party
+++ b/third-party
@@ -1 +1 @@
-/mnt/gvfs/third-party/90cb1654197e56261b1733c704b387285f36208e
\ No newline at end of file
+/mnt/gvfs/third-party/7097083d10d37251218531da398545658872a47a
\ No newline at end of filediff --git a/ti/proxygen/TARGETS b/ti/proxygen/TARGETS
Test Plan:
$ arc export --git --diff 1
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, lesliepc16
Differential Revision: https://secure.phabricator.com/D3672
Summary: I use it more often without second parameter than with it.
Test Plan:
Lint of:
preg_quote('');
preg_quote('', '/');
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3647
Summary: cd && cmd won't work so use chdir; -m $multiline_message won't work so use -F $tmp_file
Test Plan: this is actually un-tested at the moment.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1617
Differential Revision: https://secure.phabricator.com/D3592
Summary:
Currently, we run `runDiffSetupBasics()` //after// splitting off background lint and unit tests. However, this means `--base` and any explicit revision name (like "HEAD^") will not be parsed, so the call to `getRelativeCommit()` in order to generate `arc lint --rev XXX` will fail or not work as expected, because it will ignore any arguments.
Instead, parse `--base`, explicit revisions, and other repository API arguments before doing lint and unit tests.
Test Plan:
- Set global config for `base` to `arc:amended, git:branch-unique(origin/master)`.
- Created a commit on master.
- Ran `arc diff HEAD^`.
- Before this change, the command fails with "Usage Exception: None of the rules in your 'base' configuration matched a valid commit. Adjust rules or specify which commit you want to use explicitly." when it attempts to run lint, because the `HEAD^` argument is never parsed. After
- After this change, the command succeeds.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3574
Summary:
We store the message to a scratch file.
But if I need to switch context, commit something else and then go back then I'll lose the message.
Amend the repository commit by it instead.
This also removes the annoying question "Do you want to use this message?".
Test Plan: Made an error in message, verified Git log.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3561
Summary:
Currently, we print `arc tasks` in a console-agnostic and unicode-unaware way, so:
- Tasks with multibyte characters get aligned incorrectly (see T1831); and
- narrow terminals plus long task names results in a broken display.
Test Plan: Ran `arc tasks`. Will post screenshots.
Reviewers: btrahan, vrana, Korvin
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T749, T1831
Differential Revision: https://secure.phabricator.com/D3568
Summary:
See https://github.com/facebook/arcanist/pull/53
- Work correctly for directories with `%` in their name; this breaks under sprintf().
- Search for `src/` -> `tests/` style directories.
- Add coverage for search paths.
Test Plan:
Ran unit tests.
I don't have a working test case for PHPUnit tests, can one of you guys apply this and verify I didn't break your setups?
Reviewers: quard, aurelijus
Reviewed By: aurelijus
CC: aran
Differential Revision: https://secure.phabricator.com/D3558
Summary: `arc patch` currently warns about "This diff is against commit svn+ssh://... but the commit is nowhere in the working copy" in Git SVN repository.
Test Plan:
$ arc patch # in Git SVN repository
$ svn find-rev r121212112 # invalid revision
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3539
Summary: Patch created on Git contains 'unix:filemode' property which is useless in SVN.
Test Plan: Exported a bundle changing a file to executable in Git, applied it in SVN, verified that the file is executable.
Reviewers: epriestley
Reviewed By: epriestley
CC: ptarjan, aran, Korvin, digoangeline
Differential Revision: https://secure.phabricator.com/D3554
Summary:
Running `a.php` from command line doesn't work on Windows, we need to run `php a.php`.
This shouldn't break other OSes.
Test Plan:
$ arc diff --background 1
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3544
Summary:
I am using it for about a month.
It works even in Facebook www.
Test Plan:
$ arc diff --background 1 # hundreds of times
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3495
Summary: $param is null here. it should be $node.
Test Plan: arc lint no longer barfed on me!
Reviewers: vrana, epriestley
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3540
Summary:
Adds a test which goes through a git repository commit by commit and applies them (in effect) via "arc patch", verifying that the results match the actual commit.
See D3439 for the fixture stuff.
The git repo archive has a couple of trivial commits in it:
$ ../libphutil/scripts/utils/directory_fixture.php src/parser/__tests__/bundle.git.tgz
Spawning an interactive shell. Exit when complete.
sh-3.2$ git log
commit f19fb9fa1385c01b53bdb6d8842dd154e47151ec
Author: epriestley <git@epriestley.com>
Date: Wed Sep 5 14:30:28 2012 -0700
Edit a text file.
commit 228d7be4840313ed805c25c15bba0f7b188af3e6
Author: epriestley <git@epriestley.com>
Date: Wed Sep 5 14:30:11 2012 -0700
Add a text file.
Test Plan: Ran tests.
Reviewers: edward
Reviewed By: edward
CC: aran
Maniphest Tasks: T866
Differential Revision: https://secure.phabricator.com/D3440
Summary:
If the file has no changes (probably because it has been moved or copied) then we fail.
Fixes T1708, fixes T1559.
Test Plan:
$ svn mv a b
$ arc diff --only
$ svn revert a b
$ arc patch --diff # of created diff
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: aran, Korvin
Maniphest Tasks: T1559, T1708
Differential Revision: https://secure.phabricator.com/D3526
Summary:
This problem shows very far away.
One of the symptomps is that the contents of a moved file is displayed as added in Differential but it is not a big deal.
The real trouble happens when you try to `arc patch` this diff.
It tries to both copy the file and to add a new contents (which fails).
Fixes T1709.
Test Plan:
$ git mv a b
$ git commit -m.
$ arc diff --only
$ git reset --hard HEAD^
$ arc patch --diff # of the created diff
$ arc unit src/parser/__tests__
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: aran, Korvin, boris, mroch, slawekbiel
Maniphest Tasks: T1709
Differential Revision: https://secure.phabricator.com/D3524
Summary: We don't store old file PHID for binary file moves here.
Test Plan: `arc patch` on revision with binary file moves which was failing earlier.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3521
Summary: We call it from `arcanist.php`.
Test Plan: This diff.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3496
Summary: We currently insert background parameters to end which causes ignoring them if there is '--'.
Test Plan:
$ arc diff --background 1 -- HEAD^
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3497
Summary: I want to use it from outside.
Test Plan:
$ arc unit src/lint/linter/__tests__/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3493
Summary: I don't offer a replacement because `f() ?: 1` converted to `f() ? f() : 1` can cause side effects and whitespace issues.
Test Plan: New test.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3489
Summary:
`pht()` can be some random function.
Better solution would be to separate this linter to its own class but it would be slower.
Also use `PhutilLintEngine` as `lint.engine`.
Test Plan:
$ arc lint # on file with pht($a)
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3480
