Summary:
These trip me up every time because Differential has:
> Comment, Accept, Request Changes, Resign, Commandeer, Add Reviewers, Add Subscribers
while audits currently show:
> Comment, Add Subscribers, Add Auditors, Accept, Raise Concern, Resign
Now they're more or less in the same order which helps with muscle memory.
Test Plan: Careful inspection.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15323
Summary:
Fixes T10205. Ref T10246. Previously, the issue was that the result set was not ordered, so "More Results" would not have been able to work in a reasonable way if there were more than 100 matching interfaces.
You would have seen 100 interfaces more or less at random, then clicked "more" and gotten 100 more random interfaces.
Now, you would see 100 "a" interfaces, then click more to get the next 100 alphabetical interfaces (say, "b" and "c" interfaces).
Test Plan:
- Clicked browse when binding an interface.
- Got a browse dialog.
- Artificially set query limit to 1, paged through "local" interfaces in an ordered, consistent way.
{F1121313}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10205, T10246
Differential Revision: https://secure.phabricator.com/D15320
Summary:
Ref T10205. Ref T10246. This is general modernization, but also supports fixing the interface datasource in T10205.
- Update Query.
- Update SearchEngine.
- Use an ngrams index for searching names efficiently.
Test Plan:
- Ran migrations.
- Searched Almanac devices by name.
- Created a new device, searched for it by name.
{F1121303}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10205, T10246
Differential Revision: https://secure.phabricator.com/D15319
Summary: Not terribly useful. Also removed close your stuff reminder.
Test Plan: View question I asked and strangers question. Both layout more normal like.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15312
Summary: Ref T10394. Currently, these rules are only active if the Macro application is installed. Instead, install them unconditionally.
Test Plan:
- Used `{icon camera}` with Macro installed and uninstalled.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10394
Differential Revision: https://secure.phabricator.com/D15311
Summary: Swapping out to PHUIDocumentProView to remove all calls to PHUIDocumentView.
Test Plan: Review the Phabricator Readme.MD in Diffusion
Reviewers: epriestley, avivey
Reviewed By: avivey
Subscribers: avivey, Korvin
Differential Revision: https://secure.phabricator.com/D15308
Summary:
WMF ran into this after their update. Here's the setup:
- When you enable Spaces, we leave all existing objects set to `null`, which means "these belong to the default space". This is so we don't have to go update a trillion objects.
- New objects get set to the default space explicitly (`PHID-SPCE-...`) but older ones stay with `null`.
- If you edit an older object (like a task) from the time before Spaces, //and// the form doesn't have a Visbility/Spaces control, we would incorrectly poplate the value with `null` when the effective value should be the default space PHID.
- This caused a "You must choose a space." error in the UI.
Instead, populate the control with the effective value instead of the literal database value. This makes the edit go through cleanly.
Also add a note about this for future-me.
Test Plan:
- Disabled "Visibility" control in task edit form.
- Edited an old task which had `null` as a `spacePHID` in the database.
- Before patch: UI error about selecting a Space.
- After patch: edit goes through cleanly.
Reviewers: chad, 20after4
Reviewed By: chad, 20after4
Subscribers: 20after4, aklapper
Differential Revision: https://secure.phabricator.com/D15306
Summary:
Ref T4245. This could still use a little UI smoothing, but:
- Don't require a callsign on the create flow (you can add one later in "Edit Basic Information" if you want).
- Allow existing callsigns to be removed.
Test Plan:
- Created a new repository with no callsign.
- Cloned it; pushed to it.
- Browsed around Diffusion a bunch.
- Visited a commit URI.
- Added a callsign to it.
- Removed the callsign again.
- Referenced it with `R22` in remarkup.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15305
Summary:
Ref T4245. This is a prelude to removing them from the "create" screen.
Currently, if you try to delete the callsign you get an unceremonious database error, but the next diff (or maybe two) will permit that, so I didn't put any "this is required yada yada" text in.
This could also maybe use some big flashing warning lights and a "if you edit this, all your URIs break" but I'll save that for later.
Test Plan: Changed the callsign for a repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15304
Summary: Ref T4245. When creating new repositories, set a default local path based on the repository ID instead of callsign.
Test Plan:
- Created a new repository.
- Saw it get a reasonable, ID-based local path.
- Edited a repository to make sure the `applyFinalEffects()` wasn't doing anything whacky.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15303
Summary: Ref T4245. Consolidates the URI parsing/rewriting logic so that repositories can be served from either `/diffusion/XYZ/` or `/diffusion/123/`, over both HTTP and SSH.
Test Plan:
- Pulled a Git repository by ID and callsign over HTTP and SSH.
- Pulled a Mercurial repository by ID and callsign over HTTP and SSH.
- Pulled a Subversion repository by ID and callsign over SSH (no HTTP support for SVN).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15302
Summary:
Ref T4245. Make `/diffusion/123/` work, but redirect the user to `/diffusion/XYZ/` if the repository has a callsign.
(Right now, every repository has a callsign, so this always redirects.)
Also redirect `/R123:abcdef` if the repository has a callsign.
Also also, move the Pull garbage collector somewhere more sensible.
Test Plan:
- Added test coverage.
- Visited `/diffusion/1/`, was redirected.
- Visited `/diffusion/R1:abcdef`, was redirected.
- Browsed Diffusion normally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15301
Summary: Ref T10349.
Test Plan:
- Added archived and unarchived project tags to a task.
- Saw unarchived tags, only, on cards.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15297
Summary: Ref T4245. This currently accepts only callsigns; prepare it for the bright new callsign-optional world.
Test Plan:
- Ran `./bin/diviner generate --repository 1 --book src/docs/book/flavor.book --clean`, got a good result.
- Ran `./bin/diviner generate --repository 239238 --book src/docs/book/flavor.book --clean`, got an appropraite error about a bad repository identifier.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15296
Summary: Ref T4245. This has no callers.
Test Plan:
- Ran `git grep -i 'getCallsign('` and visually verified that no callers could reasonably be `DiffusionRequest` objects (there are only 23 remaining sites, and about half are `$this->...` in `PhabricatorRepository`.
- Browsed around directory/file/branch/content/diff/etc pages in Diffusion.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15295
Summary:
Ref T4245. We pass this exclusively for use by additional third-party hooks.
This is technically a backward compatibility break, but I suspect it doesn't affect anyone:
- Probably almost no one is using this (there are few reasons to, even for the tiny number of installs with custom commit hooks).
- If they are, there's a good chance the PHID will work anyway, since nearly all scripts and Conduit methods will accept it in place of a callsign now, and if it's in logging or debugging code the PHID is a reasonable substitute
- Even if it doesn't just keep working, the break should be very obvious in most reasonable cases.
I'll call this out explicitly in the changelog, though -- almost everything else will just continue working, but this is a strict compatibility break.
Test Plan:
- Ugh.
- Picked a hosted Git repo out of Diffusion.
- Went to the path on disk.
- Went into `hooks/`.
- Went into `pre-receive-phabricator.d/`.
- Wrote this hook and gave it `chmod +x`:
```name=stuff.sh
#!/bin/sh
echo $PHABRICATOR_REPOSITORY >> /tmp/stuff.log
```
- Pushed to the repository.
- Saw a PHID show up in the log:
```
$ cat /tmp/stuff.log
PHID-REPO-bqkcdp47euwnwlasrsrh
```
Reviewers: chad, avivey
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15294
Summary:
Ref T4245. Two effects:
- First, let hooks work for future repositories without callsigns.
- Second, provide a better error when users push directly to hosted repositories.
Test Plan: Ran `bin/commit-hook PHID-REPO-xxx`.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D15293
Summary: Working towards making PHUITwoColumnView into a page layout engine. Adds header support.
Test Plan: Use new header on Profile and Profiles. No visual changes, less duplicated code.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15292
Summary: Attempting to clean PHUIObjectBoxView up a little as well as finally being able to `addClass` on the sucker. I'm running into some issue with `addTabs` though, which on Files isn't firing.
Test Plan: Bounce around tons of screens.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15291
Summary:
Ref T10349. This capability didn't make a ton of sense when you had to be a member to watch a project and watch rules were simple, but makes more sense now.
A particular use case might be finding all the stuff you're watching so you can prune it.
Test Plan: Searched for stuff I was watching, got accurate results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15289
Summary: We're using this a little more, so I'd prefer less copy-pasta and one place to manage the UI. Maybe add a caret?
Test Plan: grep for 'Actions', test Phriction, Diviner, ect, Action Menus.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15288
Summary: Fixes T9562. We already do this for tags, but didn't have similar logic for branches. Implement that logic.
Test Plan:
- Set limit to 1, saw "More branches", clicked it, got the correct results.
- Verified that branch table with no specified commit still works properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9562
Differential Revision: https://secure.phabricator.com/D15284
Summary: Uses the background color changes to show also on the side nav. Places color on entire body so fullscreen doesn't show other body color.
Test Plan: Review various workboard colors at normal and fullscreen
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15283
Summary:
Fixes T10304. In Mercurial, we must enumerate the whole file tree. Currently, we incorrectly count files within directories (which won't be shown) toward the "100 file" limit at top level, so directories with more than 100 subpaths are truncated improperly.
This is approxiately the same as @richardvanvelzen's fix.
Test Plan: Viewed a large Mercurial repository, saw a complete directory listing.
Reviewers: chad
Reviewed By: chad
Subscribers: richardvanvelzen
Maniphest Tasks: T10304
Differential Revision: https://secure.phabricator.com/D15282
Summary: Moves all the one off object calls to PHUIRemarkupView, adds a "Document" call as well (future plans).
Test Plan: Visited most pages I could get access to, but may want extra careful eyes on this diff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15281
Summary:
Ref T10349. These got sort of half-weirded-up before I separated subscriptions and watching fully. New rules are:
- You can watch whatever you want.
- Watching a parent watches everything inside it.
- If you're watching "Stonework" and go to "Stonework > Masonry", you'll see a "Watching Ancestor" hint to let you know you're already watching a parent or ancestor.
Test Plan:
- Watched and unwatched "Stonework".
- Watched and unwatched "Stonework > Iteration IV".
- While watching "Stonework", visited "Iteration IV" and saw "Watching Ancestor" hint.
- Created a task tagged "Stonework > Iteration IV". Got notified about it because I watch "Stonework".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15280
Summary: Should make it simpler here to have more `rgba` rules in CSS for things like hovers, selected states. Maybe only use `rgb` colors? Color pallette probably needs an overhaul.
Test Plan: Bounce around random pages, buttons, menus. Everything appears normal.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15273
Summary:
Adds a UI for selecting background colors.
You can choose "Use Parent", which is the default, and allows you to set a color that all descendants inherit.
You can also choose "None", if a parent has a WHACKY BACKGROUND that you refuse to put up with.
Test Plan:
{F1114588}
{F1114589}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15279
Summary:
This gives us room for less-common workboard management options like "Disable Board" without overloading the menus on the main board.
Particularly, we can add background color options here without anything getting weird.
I've left "Add Column" on the main UI since I think it's common enough to leave there. We could probably move "Hide Column" to this UI in the future, though.
Test Plan: {F1114475}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15278
Summary:
Ref T10349. At HEAD, if you create a task //on a board//, it floats to the top correctly.
If you create a task elsewhere and tag it with the board, you were subject to the whims of the layout engine and it would generally end up on the bottom.
Instead, make the rules consistent so that "virtual" positions (of tasks which haven't been committed to a particular position yet) still float to the top.
Test Plan:
- Created tasks from a board.
- Created tasks from Maniphest, then looked at them on a board.
- Moved tasks around.
- In all cases, newly created tasks floated to the top.
- Sorted by natural and priority.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15276
Summary: Fixes T10361.
Test Plan:
- Created a poll with an embedded file and a mention of a task.
- Verified file was attached properly.
- Verified mention appeared on task.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10361
Differential Revision: https://secure.phabricator.com/D15277
Summary: Fixes T10360. In modern code, most of the meat is automatic.
Test Plan:
- Edited view policy and edit policy from web UI.
- Viewed package, saw policy badge in header.
- Tried to edit a package as a user without permission, got appropriate disabled states and errors.
- Changed policies via Conduit.
- Tried to view a package as a user without permission.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10360
Differential Revision: https://secure.phabricator.com/D15275
Summary:
Fixes T10357.
- Show a better (more descriptive) error message when a user who can't create projects tries to create a subproject or milestone.
- Disable the subproject actions if you don't have create permission.
All this stuff was already enforced properly: this diff doesn't make any actual policy changes, just improves the UI for users who lack permission.
Test Plan:
- As an unprivileged user (no "Can Create Projects"), tried to create a subproject or milestone.
- After patch, got a disabled action, with more specific and helpful error than before.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10357
Differential Revision: https://secure.phabricator.com/D15274
Summary: Makes these pages a dialog endpoint, keeping you on the Workboard when possible.
Test Plan: Create a Column, Edit a Column, visit hard page. Test letters in the points field.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15270
Summary: Cleans up the backgrounds a little on Projects/Profiles and adds a number of colour choices for Workboards.
Test Plan:
Manually add each color for testing. Test new project / profile layouts with and without properties.
{F1109325}
{F1109326}
{F1109327}
{F1109328}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15269
Summary:
Ref T10349. Columns have the same policies as the projects they belong to.
However, the current implementation just returns the policy directly. This usually works, but if the project has a policy like "Members of (This) Project", the policy filter tries to check if the viewer is a member of //the column itself//. That doesn't work, since columns don't have members. This leads to a situation where columns on "Editable By: Project Members" projects can not be edited.
Instead, return a permissive base policy and then use an extended policy to bind the column policy to the project policy.
Test Plan:
- Edited a column on an "Editable By: Members of Project" board.
- Added and ran a unit test covering this case.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15268
Summary:
Ref T10349. Instead of showing columns in "Backlog, Custom, Sprint 1, Sprint 2, Sprint 3" order, show the sprints in reverse order: 3, 2, 1.
This makes it easier to get to the new stuff, and you don't have to drag over older stuff or archive it immediately.
Trello's own meta-board for Trello development is a good example of this in the wild: older stuff goes out to the right, so you can get to the newer stuff easily:
https://trello.com/b/nC8QJJoZ/trello-development
Test Plan: Saw board in 3, 2, 1 order instead of 1, 2, 3.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10349
Differential Revision: https://secure.phabricator.com/D15267
Summary: Ref T10350. Normally, milestone numbers and IDs have the same order, but they may not if you used the script in T10350 to artificially move a bunch of stuff around.
Test Plan: Milestones now go "1, 2, <thing I artifically moved into position 3>" on local install.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10350
Differential Revision: https://secure.phabricator.com/D15266
Summary:
Fixes T10346. You finally wrung a clue out of the reporter and I think I figured this out.
Here's the bug:
- Create a project with a workboard and subprojects/milestones.
- Create a new project, import columns from the first project.
- We incorrectly import empty columns for the subprojects/milestons.
Instead, skip proxy columns during import.
Also, allow "hide column" to continue on missing fields, so columns with no name can be hidden.
Test Plan:
- Did the stuff above.
- Workboard no longer populated with a bunch of "Unnamed Column" columns.
- Hid several "Unnamed Column" columns.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10346
Differential Revision: https://secure.phabricator.com/D15265
Summary: This just hides them, should still show on "View All".
Test Plan: Hide a Milestone, no longer see it on home. Click "View All", see all Milestones.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15264
Summary: Occasionally, double clicking crumbs to select them is useful.
Test Plan: {F1107226}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15263
Summary: Fixes T10347. In the long run maybe we'll try to guess this better, but for now get rid of the "Milestone X" hardcode and just show what the last one was called.
Test Plan:
- Created the first milestone for a project.
- Created the nth milestone for a project.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10347
Differential Revision: https://secure.phabricator.com/D15262
Summary:
Fixes T10285.
- If a result (like a milestone) has no primary hashtag, try to fill in a secondary hashtag.
- If we can't find any hashtag, don't return the result.
This produces these behaviors:
- By default, you can't autocomplete milestones.
- If you give one a hashtag, you can.
We might want to give milestones "special" hashtags eventually (like `#xyz/33`) but this fixes the confusing/broken behavior in the UI and we can wait for a better use case for letting you autocomplete milestones, I think.
Also, don't try to cycle hashtags when renaming milestones. This was a little inconsistent before.
Test Plan:
- Autocompleted normal projects.
- Autocompleted milestones with explicit hashtags.
- No autocomplete entry for milestones with no special hashtags.
- Used normal typeahead to get tag-less milestones to make sure I didn't break anything.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10285
Differential Revision: https://secure.phabricator.com/D15261
Summary: Fixes T10310. This replaces the "Hide Column" / "Show Column" option for milestone columns with one that archives/unarchives, and hides milestone columns when the milestone project is archived.
Test Plan:
- Hid and unhid a normal column (got normal dialogs).
- Hid and unhid a milestone column (got "archive project" dialogs, underlying project archived/unarchived, column vanished).
Reviewers: hach-que, #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: jcowgar, Korvin
Maniphest Tasks: T10310
Differential Revision: https://secure.phabricator.com/D15231
Summary: Clean the UI up a little.
Test Plan: {F1106533}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15259
Summary:
Fixes T10264. I'm reasonably confident that this is the chain of events here:
First, prior to 8269fd6e, we would ignore "Content-Encoding" when reading inbound bodies. So if a request was gzipped, we would read a gzipped body, then give `git-http-backend` a gzipped body with "Content-Encoding: gzip". Everything matched normally, so that was fine, except in the cluster.
In the cluster, we'd accept "gzip + compressed body" and proxy it, but not tell cURL that it was already compressed. cURL would think it was raw data, so it would arrive on the repository host with a compressed body but no "Content-Encoding: gzip". Then we'd hand it to git in the same form. This caused the issue in 8269fd6e: handing it compressed data, but no "this is compressed" header.
To fix this, I made us decompress the encoding when we read the body, so the cluster now proxies raw data instead of proxying gzipped data. This fixed the issue in the cluster, but created a new issue on non-cluster hosts. The new issue is that we accept "gzip + compressed body" and decompress the body, but then pass the //original// header to `git-http-backend`. So now we have the opposite problem from what we originally had: a "gzip" header, but a raw body.
To fix //this//, we could do two things:
- Revert 8269fd6e, then change the proxy request to preserve "Content-Encoding" instead.
- Stop telling `git-http-backend` that we're handing it compressed data when we're handing it raw data.
I did the latter here because it's an easier change to make and test, we'll need to interact with the raw data later anyway, to implement repository virtualization in connection with T8238.
Test Plan: See T10264 for users confirming this fix.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10264
Differential Revision: https://secure.phabricator.com/D15258
Summary:
This commit adds the `transactionID` field to manphest.gettransactions, to
satisfy the request in T10327
Test Plan: Call the `maniphest.gettransactions` endpoint, verify `transactionID` is present
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin
Differential Revision: https://secure.phabricator.com/D15250
Summary:
Fixes T6641. This allows users who have permission to edit a project to use "Save as Default" to save the current order and filter as defaults for the project.
These are per-board defaults, and apply to all users. The rationale is that I think the best default ordering/filtering depends mostly on the board, not the viewer.
This seems to align with most requests in the task, although rationale is a bit light. But, for example, it seems reasonable you might want to change the default filter to "All Tasks" on a sprint board, so you can see what's in the "Done" column.
This also fixes some minor issues I ran into:
- Herald could hit an issue while checking permissions if the project was a subproject and a non-member had a triggering rule.
- "Advanced filter..." did not prefill with the current filter.
Test Plan:
- Set default order and filter on a workboard.
- Reloaded board, saw settings stick.
- Tried to edit a board as an unprivileged user (disabled menu items, error).
- Reviewed transaction log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6641
Differential Revision: https://secure.phabricator.com/D15260
Summary:
Fixes T10343. All solutions here seem basically fine. I think adding this small bit of complexity is OK, and sorrrrt of like this behavior sometimes.
- Allow disabling this behavior per-status.
- Disable it by default for "Invalid" and "Duplicate" (I left "wontfix", since that's a resolution?).
Beyond being more flexible, I think this is slightly better?
Test Plan:
- Closed a task as invalid: no claim.
- Closed a task as resolved: claim.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10343
Differential Revision: https://secure.phabricator.com/D15257
Summary: Ref T4427. Seems fine / not egregiously broken.
Test Plan: Edited points configuration. Tried to set a bad value. Set a good value. Persued examples and help text.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15256
Summary: minor spacing updates, but i need to likely take a more details pass, specifically points look janky with project tags since they are not in the same `li`.
Test Plan: Zoom into tags, see they all are same height and align.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15255
Summary: Mimics the Project Hovercards, more custom UI.
Test Plan: Hover over person with and without badges, hover over project.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15253
Summary:
Fixes T10330.
- Anywhere we support "matches regexp", also allow "does not match regexp". Although you can sometimes write a clever negative regexp, these rules are better expressed with "does not match <simple regexp>" anyway, and sometimes no regexp will work.
- Always allow "does not contain" when we support "contains".
- Fix some JS issues with certain rules affecting custom fields.
Test Plan:
- Wrote an "Affected files do not match regexp" rule that required every diff to touch "MANUALCHANGELOG.md".
- Tried to diff without the file; rejected.
- Tried to diff with the file; accepted.
- Wrote a bunch of "contains" and "does not contain" rules against text fields and custom fields, then edited tasks to trigger/observe them.
- Swapped the editor into custom text, user, remarkup, etc fields, no more JS errors.
{F1105172}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10330
Differential Revision: https://secure.phabricator.com/D15254
Summary: One missing word, one `0` that should be a `)`, simplify a couple of mega-clauses to improve readability?
Test Plan: ((O)) . ((O))
Reviewers: michaeljs1990, chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15252
Summary: We will sell you as many new databases as you want, cheap! Just $1 per database!
Test Plan: (O).(O)
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15249
Summary: Also adds the commit to the header underneath the title. Ref T7628
Test Plan: Review a few Diffusion pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7628
Differential Revision: https://secure.phabricator.com/D15246
Summary: These are not needed I think? and handy for cut and paste. Fixes T7628
Test Plan: cut and paste easier from commit hash.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T7628
Differential Revision: https://secure.phabricator.com/D15245
Summary:
These columns were conflating `projectPHID` (the defualt project to add to the task) with `boardPHID` (the board the column appears on).
Separate them to fix the beahvior.
Test Plan: Used "Add Task" from dropdown menu of a milestone column on a parent project's workboard.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15242
Summary: I missed this during cleanup.
Test Plan: Go to a project, then: Subprojects, Create Milestone, Cancel. No longer 404/fatals.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15241
Summary:
Fixes T8197. Currently, if you priority-sort a workboard and drag a card to the top or bottom, we change the priority even if we do not need to.
For example, if the lowest priority in a column is "Low", and you drag a "Wishlist" task underneath it, we incorrectly increase the priority of the task to "Low", when we do not actually need to touch it. This is bad/confusing.
A similar thing happens when dragging a "High" priority task to the top of a column where the highest priority is currently "Normal".
Test Plan:
- Create a column with a "Normal" task.
- Sort workboard by Priority.
- Drag a "High" task above it. After patch: task still "High".
- Drag a "Wishlist" task below it. After patch: task still "Wishlist".
Also dragged a ton of tasks into the middle of other tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8197
Differential Revision: https://secure.phabricator.com/D15240
Summary:
Fixes T6580. Now:
- Empty field means "unlimited".
- Zero means 0.
- Nonzero means that number.
(Although you can now have fractional points, I didn't change columns to allow fractional limits, because too bad.)
Test Plan: {F1103688}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6580
Differential Revision: https://secure.phabricator.com/D15239
Summary: Ref T4427.
Test Plan:
- Dragged a 17 XP task from "Hunting" to "Slain".
- Saw 17 XP move.
- Level up!
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15237
Summary:
Ref T4900. Briefly:
- Much more layout and rendering is now done in Javascript.
- This should otherwise be identical to the behavior at HEAD, except that:
- editing a task and removing the current board from it no longer removes the task; and
- points still don't work.
However, this can now plausibly support realtime workboard updates and other complex state-based behaviors like points calculations in a future change.
Test Plan:
- Changed card covers.
- Moved cards.
- Sorted board by priority and natural.
- Added new cards.
- Edited cards in place.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15234
Summary:
Ref T4900. To eventually support realtime board updates, we need to be able to perform a board state update without the context of the action which caused it.
For example, if the server says "update card Y", we need to know what to do without being told "card Y was moved from column A to column B" explicitly. Currently, all the update code relies on knowing what happened and which nodes were affected.
This is only a small step forward, but starts making things a bit more independent and consistent.
Test Plan:
- Moved cards around.
- Changed card cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15228
Summary:
Ref T4900. Broadly, workboard state management is fairly ad-hoc now, which makes things like this (where some kind of edit affects global state) difficult:
- Updating points header to reflect a sum change after dragging a task.
- Changing progress bars after editing a task to change resolution or points value.
- Moving a card to the correct column after editing it and changing subprojects/iterations.
- Responding to real-time notifications about other users moving cards.
This begins rewriting the code in a way that can better accommodate these kinds of far-reaching state update.
This change just moves cover image stuff. I'll continue moving features one at a time until boards work better.
Test Plan: Updated some cover images.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4900
Differential Revision: https://secure.phabricator.com/D15224
Summary: Fixes T10316. Fixes T10311.
Test Plan:
- Create a project, create a milestone, go back to the parent, go to the workboard. Previously, fatal. Now, prompts you to create workboard.
- Create a project, create a milestone, create the parent workboard, put a task in the milestone's column, go to the milestone workboard. Previously, fatal. Now, prompts you to create workboard.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10311, T10316
Differential Revision: https://secure.phabricator.com/D15232
Summary:
Ref T4427.
- When points are configured, show them on the task detail page (just a simple property, at least for now).
- Typecast points better to avoid "joe changed points from 12 to 12." beacuse we compare the stored value (as a string) to the new value (as a double).
Test Plan:
- Saw points on detail view.
- Created task with points, then edited it without touching points. No more spurious "changed from 12 to 12" transaction.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15223
Summary:
Ref T4427.
- New config option for labels, enabling, etc., but no UI/niceness yet.
- When enabled, add a field.
- Allow nonnegative values, including fractional values.
- EditEngine is nice and Conduit / actions basically just work with a tiny bit of extra support code.
Test Plan:
- Edited points via "Edit".
- Edited points via Conduit.
- Edited points via stacked actions.
- Tried to set "zebra" points.
- Tried to set -1 points.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4427
Differential Revision: https://secure.phabricator.com/D15220
Summary:
Ref T10288.
I couldn't figure out how to reasonably get the interior right borders to round like the mock, but I think this is otherwise mostly faithful. Feel free to fix stuff.
Test Plan: {F1100415}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10288
Differential Revision: https://secure.phabricator.com/D15219
Summary:
Currently never read or written.
Supports fractions.
There's no such thing as an unsigned double so this also supports negative values, technically, although I'll eventually prevent this in the UI.
Test Plan: `bin/storage upgrade`, then created and edited a task. Nothing was different.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15218
Summary:
Before edges, we stored some of this stuff directly on tasks.
- `attached` was migrated to edges in Jan 2013.
- `projectPHIDs` was never used, as far as I can tell?
- `ccPHIDs` was migrated away and dropped more than a year ago.
None of these columns are used in modern code (instead, modern code uses edges).
Test Plan: `grep`, browsed around, `bin/storage upgrade`, unit tests.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15216
Summary:
Fixes T7410.
- Adds a "Disable Workboard" action to the "Manage Backlog" menu.
- We'll probably move this somewhere else if/when that column gets too messy.
- Disabling a board hides it, prevents it from being recreated by non-editors, and hides the "Project (Backlog)" annotations.
- Resotring a board puts it back in pristine condition.
Test Plan:
- Disabled a board.
- Verified "(Backlog)" annotations vanished.
- Enabled a board.
Reviewers: chad
Reviewed By: chad
Subscribers: mbishopim3
Maniphest Tasks: T7410
Differential Revision: https://secure.phabricator.com/D15215
Summary:
- Custom scrollbars, colors
- New div with some better padding (floor for the column)
- More consistent spacing around the board itself.
- Slightly darker columns
- Smaller horizonal scrollbar
Test Plan:
Chrome Mac / Desktop.
{F1100342}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15217
Summary: Fixes T10299.
Test Plan:
- Visited `/maniphest/?projects=x` locally, where `x` is some valid project slug.
- Before patch: Fatal on `requireViewer()` call.
- After patch: Works correctly, filling the correct project into parameters.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10299
Differential Revision: https://secure.phabricator.com/D15214
Summary: This scroll lock thing prevented both X and Y scrolling, but should only prevent Y scrolling. Dragging a card to the edge to scroll left/right is fine.
Test Plan: Scrolled a workboard left/right by dragging a card to the edge.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15213
Summary:
Ref T5240. For boards with a lot of columns and users without "shift + mousewheel" or a touchpad, allow click-drag on the board background to pan the board horizontally.
The `ew-resize` cursor cue might be a little too intense. If it's annoying, we could drop it and just leave this as a secret feature to discover.
Test Plan: Panned the board horizontally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15211
Summary:
Ref T5240.
- Columns are fixed height.
- Columns scroll internally.
- Drag behaviors generally align with these column behaviors.
Test Plan: {F1099061}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15209
Summary: Fix typo. That said, I love the example.
Test Plan: no
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15210
Summary:
Ref T10295
* Viewing Upcoming Events in the calendar would display 'Attending: ' even if there were not attendees. This caused confusion, such as 'Is it telling me I am "Attending?"'
* When a calendar event has no attendees, simply do not display the 'Attending: ' label
Test Plan:
* Add a new event with no one attending.
* Add a new event with one or more attendees.
* View the Upcoming Events query of the Calendar app.
* Notice how the one with no attendees does not show 'Attending: ' while the other with attendees will show the already existing 'Attending: jdoe, ssmith' label.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T10295
Differential Revision: https://secure.phabricator.com/D15207
Summary:
Ref T10010.
- Viewing an empty board with milestone columns did a meaningless edge query. Don't do that.
- When creating the first milestone of a parent, force the indexing engine to rematerialize it inline. This sets `hasMilestones` properly. Otherwise, the daemons may take some time to fix this in the indexer.
Test Plan:
- Viewed an empty board of a project with a milestone.
- Viewed a normal board.
- Created the first milestone of a project with a big queue of daemons, saw project state immediately fully reflect the project having milestones.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15206
Summary: Ref T10010. Allows you to click "Milestone 99" to jump directly to that project.
Test Plan:
- Clicked milestone header, went to milestone.
- Clicked normal column header, nothing happened. Wow!
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15204
Summary: This makes small cover images full-width instead of teeny tiny dots in the middle of an island of whitespace.
Test Plan: Uploaded a small cover image.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15203
Summary: This was slightly more complex than I believed, but not too terrible.
Test Plan:
{F1096126}
- Also used some normal file uploaders to make sure I didn't break that.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15202
Summary:
No way to set photos yet, but if you magic them in they work.
Primarily, this consolidates rendering logic so the move + edit + view controllers all run the same code to do tags / cover photos.
Test Plan: {F1095870}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15201
Summary:
Ref T10010. Milestones can't have subprojects, so this item isn't very useful.
I think there is also an argument for disabling "Members", but that panel is a little less useless and explains the membership rule, so I'm less certain about removing it. I do generally lean toward removing it at some point, though.
Test Plan:
- Viewed a milestone, no "Subprojects" menu item.
- Viewed a normal project, saw item.
- Edited both menus, saw consistent UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15200
Summary:
When filling in filler projects, only select active ones.
Also use a slightly more modern method signature.
Test Plan: Disabled a project, saw it vanish from the control.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15199
Summary: Allows setting of an image to a Workboard card. (Hides from regular view, just in case).
Test Plan: Fake setting a Pholio Mock image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15198
Summary:
Ref T10010. Instead of autojoining projects, provide "Initial Members: [___]" that the user can fill in.
This is only available in the web UI when creating a (non-milestone) project.
Test Plan:
- Created a new project with no members.
- Created a new project with some members.
- Created a new milestone (no control).
- Created a new project with myself as a member and an "Editable By: Project Members" policy, to verify this use case still works properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15195
Summary: Show on hovercards and the profile page itself.
Test Plan: Review a Milestone.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15193
Summary: Minor, just fall back to the grey icon in all cases (too much color for me).
Test Plan: Review a Project and a Profile
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15190
Summary:
Ref T10289. This probably doesn't cover everything but should do a little bit better.
Although we should mabye just exlude milestones from this menu completely?
Test Plan: {F1093937}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10289
Differential Revision: https://secure.phabricator.com/D15191
Summary:
Fixes T10287. Ref T10286.
- Link stuff properly.
- Generally, show "Parent (Milestone)" instead of "Milestone".
- This probably doesn't get 100% of `getName()` -> `getDisplayName()` swaps, but we can get those as we catch them.
Test Plan: See T10286. Also clicked stuff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10286, T10287
Differential Revision: https://secure.phabricator.com/D15189
Summary:
Fixes T4136.
When listing projects in the "Visible To" selector control:
- Instead of showing every project you are a member of, show only a few.
- Add an option to choose something else which isn't in the menu.
- If you've used the control before, show the stuff you've selected in the recent past.
- If you haven't used the control before or haven't used it much, show the stuff you've picked and them some filler.
- Don't offer milestones.
- Also don't offer milestones in the custom policy UI.
Test Plan:
{F1091999}
{F1092000}
- Selected a project.
- Used "find" to select a different project.
- Saw reasonable defaults.
- Saw favorites stick.
- Tried to typeahead a milestone (nope).
- Used "Custom Policy", tried to typeahead a milestone (nope).
- Used "Custom Policy" in general.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4136
Differential Revision: https://secure.phabricator.com/D15184
Summary: Fixes T10281. Adds the closed icon (resolved, dupe, ect) as an attribute and makes the text grey again.
Test Plan:
View workboard with "All Tasks"
{F1092738}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10281
Differential Revision: https://secure.phabricator.com/D15187
Summary:
Ref T10010.
- Don't allow milestones to be reordered.
- Hide phantom subproject columns when reodrering.
- Don't allow subproject/milestone columns to be renamed.
- Force milestones to be ordered at the end, and in the correct order.
- Add some missing crumbs.
Test Plan: Reordered columns, renamed columns, made a new column, viewed column details.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15183
Summary: Fixes T10275. We'd fatal on `$flex` not being defined.
Test Plan: Uninstalled badges, viewed profile. Before: fatal; now: no badges element appears but profile renders properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10275
Differential Revision: https://secure.phabricator.com/D15182
Summary: Adds which Projects a user is a member of to their profile, with a link to more. Build fallback states for no badges or no projects.
Test Plan:
Review a user with projects, without projects, with badges, without badges.
{F1084127}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15150
Summary: Ref T10010. This gets rid of, e.g., the "Iteration I" tag in the column for that milestone, as it is redundant with the column itself.
Test Plan: {F1090427}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15181
Summary:
Ref T10010. These aren't perfect but I think (?) they aren't horribly broken.
- When a project is a parent project, destroy (as far as the user can tell) any custom columns.
- When a project has milestones, automatically generate columns on the project's workboard (if it has a workboard).
- When you move tasks between milestones, add the proper milestone tag.
- When you move tasks out of milestones back into the backlog, add the proper parent project tag.
- (Plenty of UI / design stuff to adjust.)
Test Plan:
- Dragged stuff between milestone columns.
- Used a normal workboard.
- Wasn't able to find any egregiously bad cases that did anything terrible.
{F1088224}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15171
Summary: Ref T10010. This isn't totally comprehensive, and a lot of behaviors aren't testable (e.g., all the Javascript stuff) but at least covers the basic create/move/reorder operations.
Test Plan: `arc unit`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15178
Summary: Ref T10010. This retires the old way of doing things inside ColumnPositionQuery. It is now obsolete and lives in BoardLayoutEngine instead.
Test Plan:
- Moved cards, created cards, swapped filters, orders, etc.
- Some degree of unit testing coming in the next diff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15177
Summary: Ref T10010. This gets rid of the last dependency on the weird ColumnPositionQuery code.
Test Plan:
- Viewed workboards.
- Used batch editor.
- Created a new workboard.
- Dragged stuff around.
- Created new tasks into columns.
- Changed order from natural to priority, dragged things around.
- Switched filter to custom filter, "all tasks", etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15176
Summary:
Ref T10010. See D15174. This gets rid of the "actually apply the change" callsite and moves it to layout engine.
Next up is to make the board view use the layout engine, then throw away all the whack code in ColumnPositionQuery, then move forward with D15171.
Test Plan:
- Dragged tasks within a column.
- Dragged tasks between columns.
- Dragged tasks to empty columns.
- Created a task in a column.
- Swapped board to priority sort, dragged a bunch of stuff all over.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15175
Summary:
Ref T10010. This is a precursor to D15171, which I'll eventually rebuild on top of these changes.
Currently, ColumnPositionQuery does a lot of "column layout" stuff that's very similar to the Milestone/Subproject stuff that needs to happen in D15171. The current approach there ended up splitting this layout stuff across two unrelated classes (ColumnPositionQuery + BoardViewController), neither of which is a particularly great place to do it -- the Query is too low-level, and the Controller is too high-level.
Instead, introduce a new "LayoutEngine" which does all this layout stuff. Swap two of the four places that we query this stuff over to the new engine:
- "Project (Column)" on tasks.
- Transaction generation when moving cards.
These sites aren't swapped by this diff, but will be by the next one:
- Actually applying transactions.
- Main layout for boards (this could swap easily now, but applying transactions currently relies on position writes having taken place, so it can't swap until the other one swaps).
Once everything is swapped over, I should be able to add the D15171 logic to LayoutEngine instead of BoardViewController and end up with a cleaner approach overall.
One particularly benefit is that //looking// at a board won't do a bunch of position writes anymore, which wasn't a big deal, but which I was a bit uneasy with.
Test Plan:
- Viewed tasks that are on boards, saw column annotations in project list.
- Moved cards between columns on a board.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15174
Summary: I don't think these ever had hovercards, but they should with subprojects/new design.
Test Plan: pointey pointey, got a card
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15180
Summary: Fixes T10273. The threshold is `null` if no chunk engines are available, but the code didn't handle this properly.
Test Plan: Disabled all chunk engines, reloaded, hit issue described in task. Applied patch, got clean file content.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10273
Differential Revision: https://secure.phabricator.com/D15179
Summary: No UI changes, just some search and replace for UI consistency.
Test Plan: Test person and object hovercards still work. UIExamples too.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15172
Summary: Centers the page for consistency for the rest of Phame, puts blog list on right for better mobile support.
Test Plan: Review PhameHome at all breakpoints.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15170
Summary:
Ref T10010. When you try to add "Sprint 35" to a task, remove "Sprint 34", etc. Briefly:
- A task can't be in Sprint 3 and Sprint 4.
- A task can't be in "A" and "A > B" (but "A > B" and "A > C" are fine).
- When a user makes an edit which would violate one of these rules, preserve the last tag in each group of conflicts.
Test Plan:
- Added fairly comprehensive tests.
- Added a bunch of different tags to things, saw them properly exclude conflicting tags.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15167
Summary: Fixes T10259. There was no real reason to do this `ip2long()` stuff in the first place -- it's very slightly smaller, but won't work with ipv6 and the savings are miniscule.
Test Plan:
- Ran migration.
- Viewed logs in web UI.
- Pulled and pushed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10259
Differential Revision: https://secure.phabricator.com/D15165
Summary:
Ref T5240.
- Add proper class when dropping cards.
- Add proper class when creating new cards.
- Make X-drag explicit so that it works if there's only one column.
- Stop tootips when dragging, resume them after dropping.
- Move CSS rule for consistency.
- Allow user to hit "Escape" to cancel an in-progress drag.
Test Plan:
- Dropped cards.
- Created new cards.
- X-dragged on a workboard with one column and a dashboard.
- Dragged over a tooltip (no tip), dropped, moused over tooltip (tip).
- Hit escape during a drag.
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15163
Summary:
Ref T5240. With the new approach, the draggable clones lose their containers, so they don't get affected by rules like `.container .item`.
Put classes on the cards/items and use `.board-item.item` and `.standard-item.item` to apply rules instead.
This didn't turn out //too// gross, and seems relatively OK / not obviously broken.
Test Plan:
- Dragged cards on a workboard.
- Dragged items in normal lists (tasks, pinned apps).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15161
Summary:
Ref T5240. Currently, when dragging nodes, we leave them where they are in the document and apply "position: relative;" so we can move them around on screen.
- Pros: All the CSS still works.
- Cons: Can't drag them outside the nearest containing element with "overflow: hidden;", many subtle positioning bugs with scrollable containers.
Instead, this diff leaves the thing we're dragging exactly where it is, clones it, and drags the clone instead.
- Pros: You can drag it anywhere. Seems to fix all the scrolling container problems.
- Cons: CSS which depends on a container class no longer works.
The CSS thing is bad, but doesn't seem too unreasonable to fix. Basically, we just need to put some `phui-this-is-a-workboard-card` class on the cards, and use that to style them instead of `phui-workboard-view`, and then do something similar for draggable lists.
Although we no longer need to drag cards to tabs with the current design, I think there's a reasonable chance we'll revisit that later. The current design also calls for scrollable columns, but there would be no way to drag cards outside of their current column with the current approach.
NOTE: This does not attempt to fix the CSS, so dragging is pretty rough, since the "clone" loses a number of container classes and thus a number of rules. I'll clean up the CSS in the next change.
Test Plan:
- Dragged stuff around on task lists, workboards, and sort lists (e.g., pinned applications) in Safari, Firefox and Chrome.
- Scrolled window and containers (workboards) during drag.
- Dragged stuff out of the workboard.
- Dragged stuff offscreen.
- CSS is funky, but I can no longer find any positioning or layout issues in any browser.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5240
Differential Revision: https://secure.phabricator.com/D15160
Summary: Reworks cards to add an assignee head and tooltip on workboards. This feels like a reasonable starting point, but they may move depending on feedback.
Test Plan:
View a lot of boards. Assign and unassign a task.
{F1085739}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Luke081515.2, Korvin
Differential Revision: https://secure.phabricator.com/D15158
Summary: I believe this got clobbered in rP8b6edaa4e238a809fe78e6d14ad0705545f8179f. This index doesn't seem to be present in the line dictionary and we're now relying on `$line_index` for the current position.
Test Plan:
before {F1085522}
after {F1085521}
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D15156
Summary:
Mostly, this has just been sitting in my sandbox for a long time. I may also touch some charting stuff with subprojects/milestones, but don't have particular plans to do that.
D3 seems a bit more flexible, and it's easier to push more of the style logic into CSS so you can fix my design atrocities. gRaphael also hasn't been updated in ~3+ years.
Test Plan:
{F1085433}
{F1085434}
Reviewers: chad
Reviewed By: chad
Subscribers: cburroughs, yelirekim
Differential Revision: https://secure.phabricator.com/D15155
Summary: Fixes T10247. The flavor icons are unhelpful/confusing in these contexts; show a boringer icon instead.
Test Plan: Used tokenizer to select user with custom profile icon. Reloaded page. Saw boringer icon in both cases.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10247
Differential Revision: https://secure.phabricator.com/D15154
Summary: Fixes T10242. Currently, we don't extract files, mentions, etc., properly from user profile blurbs.
Test Plan: Uploaded a file to my profile blurb, saw it attach properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10242
Differential Revision: https://secure.phabricator.com/D15153
Summary: Ref T10010. Restores subprojects and milestones to the UI with a more modern style and more warnings.
Test Plan:
{F1085207}
{F1085208}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010
Differential Revision: https://secure.phabricator.com/D15152
Summary:
Fixes T10250.
Rename the one I added to `hasAnyProperties()` for clarity.
Test Plan:
- Viewed a project profile with content.
- Viewed a project profile with no properties.
- Viewed a workboard with tasks that had a mixture of additional projects and no additional projects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10250
Differential Revision: https://secure.phabricator.com/D15151
Summary: Designer, Musician, Spy, Robot
Test Plan: Click Choose Icon, see that I am a designer.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15147
Summary: Ref T10228. Commands like `git-http-backend` can emit errors with raw bytes in the output. Sanitize these if present so we can log them in JSON format.
Test Plan: Edited this into production. >_> sneaky sneaky <_<
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10228
Differential Revision: https://secure.phabricator.com/D15144
Summary: I can't find any reference to these used. Fixes T10244
Test Plan: Grep for "phui-text" and "PHUI::TEXT"
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10244
Differential Revision: https://secure.phabricator.com/D15142
Summary: It feels wierd to edit a project or profile and not see the changes. For now add them back to the Manage page.
Test Plan: Edit a Profile, Edit a Project. See updates on Manage page.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15140
Summary:
- Redirect to profileview when new image is uploaded.
- Add ProfileNav to EditPicture on Profile
- Add ProfileNav to EditProfile on Profile
Test Plan: Set new images on Profiles and Projects. See new redirect. See new navs.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15132
Summary: Fixes T10226. I just made a mistake here when rewriting this recently.
Test Plan: {F1079166}
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T10226
Differential Revision: https://secure.phabricator.com/D15131
Summary: Fixes T10176. The prefix is not useful in the JIRA context, and doubtfully useful in Asana.
Test Plan: Load, make comment on revision, see link in JIRA is pretty.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T10176
Differential Revision: https://secure.phabricator.com/D15119
Summary:
Ref T10228. This is currently quite limited:
- No UI.
- No SSH support.
My primary goal is to debug the issue in T10228. In the long run we can expand this to be a bit fancier.
Test Plan:
Made various valid and invalid clones, got sucess responses and not-so-successful responses, viewed the log table for general corresponding messages and broad sanity.
Ran GC via `bin/phd debug trigger`, no issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10228
Differential Revision: https://secure.phabricator.com/D15127
Summary:
A user in IRC seemed very confused by this, and worked extremely hard to shoot themsevles in the foot by manually writing locked configuration to the database.
Try to explain why configuration is locked better.
Test Plan:
Mostly reading.
{F1078905}
{F1078906}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15128
Summary: All our builtin images use #c4cde0 for the backdrop. This makes generation match the builtins.
Test Plan:
Build a new bug icon in Maniphest
{F1077934}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15126
Summary: Mostly for consistency, we're not using other forms of icons and this makes all classes that use an icon call it in the same way.
Test Plan: tested uiexamples, lots of other random pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15125
Summary: Reasonable first pass, removes the "light" header, due to pain of upkeep. Reinforces UI color into the Profile Nav (and later likely dropmenu hovers). Most of this is reasonably easy to maintain now, but I may do a more accurate color pass after I get some more time together with it. For now this feels pretty good if you're developing in a different color UI.
Test Plan:
Switch between all the colors, hover over all the states.
{F1076766}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15120
Summary:
- Better spacing for images
- Remove border
- White BG on Members page
Test Plan: Review Projects / Project Home / Project Members
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15118
Summary: Fixes T10213. I think the "Edit" item was originally conditional (or maybe I just forgot to add that part), but that got dropped when we swapped how it worked. This is all stable now anyway and can be available without needing prototypes enabled.
Test Plan: Edited a project menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10213
Differential Revision: https://secure.phabricator.com/D15117
Summary: Cleans up Workboards to match the mocks. No new functionality, just more consistent colors/spacing/common components.
Test Plan:
Visit a few workboards, drag and drop items. Mobile, Tablet, Desktop
{F1070733}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15115
Summary: Fixes T10217. This extra entry is just a mistake because of `rst` + `rest` both being valid suffixes. We don't need both entries.
Test Plan: Edited a paste, only saw one entry in dropdown for restructured text.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10217
Differential Revision: https://secure.phabricator.com/D15114
Summary: Ref T10054. Prevent users from removing this item and locking themselves out of the system unless they can guess the URI.
Test Plan: Tried to disable "Manage", wasn't permitted to.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15113
Summary: See T10214 for context. These transaction types are obviously wrong as far as I can tell.
Test Plan:
Created a revision and didn't see an error in the daemon log.
```lang=php
<?php
require_once dirname(__FILE__).'/phabricator/scripts/__init_script__.php';
$yelirekim = (new PhabricatorPeopleQuery)
->setViewer(PhabricatorUser::getOmnipotentUser())
->withUsernames(['yelirekim'])
->executeOne();
$raw_diff = (new PhabricatorDifferenceEngine)
->generateRawDiffFromFileContent('oldfile', 'newfile');
$diff = (new ConduitCall('differential.createrawdiff', [
'diff' => $raw_diff,
]))
->setUser($yelirekim)
->execute();
$xactions = (new DifferentialDiffTransactionQuery)
->setViewer($yelirekim)
->withObjectPHIDs([$diff['phid']])
->execute();
foreach ($xactions as $xaction) {
echo $xaction->getPHID().':'.$xaction->getTitle().PHP_EOL;
}
```
for sanity
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: michaeljs1990, epriestley
Differential Revision: https://secure.phabricator.com/D15112
Summary: Updates People profiles to look more like Project profiles. This removes Conpherence and Flag links. Don't think you like Conpherence links much and for Flags maybe we can put them in the quick create menu?
Test Plan:
View profiles with and without Badges.
{F1069365}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15111
Summary: Minor point of polish, but feels really nice. Hover over photo and edit a link to change the picture.
Test Plan:
hover hover, clicky clicky
{F1069179}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15109
Summary:
Ref T10144. This isn't comprehensive, but we can give it a try and see how it feels?
- EditEngine forms now say "Tags" instead of "Projects".
- Modern SearchEngine forms now say "Tags" instead of "Projects".
- For clarity, replaced as much "in project" language as I could find with "tagged with project" language.
Test Plan: reading / grepping + used "not tagged with any project" token
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10144
Differential Revision: https://secure.phabricator.com/D15108
Summary: Fixes T6501. This adds more API information to the newish `project.search` API method.
Test Plan: Called `project.search`, used attachments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6501
Differential Revision: https://secure.phabricator.com/D15105
Summary: This improves consistency (by making this UI more similar to the projects UI) and gives us more flexibility the next time we update user profiles.
Test Plan:
{F1068889}
Took all the actions (probably?) to check that all the redirects were updated.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15104
Summary: Ref T10054. This primarily improves aesthetics and consistency for member/wathcher lists in projects.
Test Plan:
{F1068873}
{F1068874}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15103
Summary: Moves some profile css into PHUI, cleans up mobile view and desktop spacing.
Test Plan: Test Project at desktop and mobile breakpoints.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15106
Summary: Ref T10054.
Test Plan:
{F1068420}
Also looked at a project which did have stuff to make sure the stuff still worked.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15102
Summary: Fixes T10212. This method was removed in D14990, but I missed a callsite.
Test Plan: Disabling blame now works nicely.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10212
Differential Revision: https://secure.phabricator.com/D15100
Summary: I moved history to manage and missed this callsite.
Test Plan: Use present icon/color quick select.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15099
Summary:
First pass at a new Project Home page. This is starting to sprawl, so punting this up now before it gets too large.
- Project homes now have "large header"
- Custom Fields / Descriptions are in the main column
- Feed is simpler visually
- new "Background" option for PHUIObjectBoxView
- move header buttons globally to "Grey" instead of "Simple"
- New color and hover states for "Grey"
- Transitions on Buttons haha
- Edit Icon on Nav is now under "Manage" panel
- New "Manage" Panel
TODO:
- More testing of bad cases of Custom Fields
- Members Page in flux, needs design
- Um still not sure how to make Custom Field not show UI
Test Plan:
Lots of random Project page visits. Save project, watch project, edit project, etc.
{F1068191}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15097
Summary:
Fixes T10211. This transaction can either be setting or removing the "destroyed" flag, but we show "destroyed" in both cases.
Instead, if the transaction is clearing the flag, render "restored".
Test Plan: {F1068142}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10211
Differential Revision: https://secure.phabricator.com/D15096
Summary: Ref T10054. Since we no longer have the "workboard default if it exists" rule, provide a quick way to make it the default.
Test Plan: Created a new workboard with the box checked, saw menu change appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15092
Summary: racooons → racoons
Test Plan: Read again the sentence.
Reviewers: #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D15094
Summary:
Ref T10054. Ref T6961.
- Existing projects with workboards had "Workboard" as the default menu item. Retain this behavior.
- Populate the recently-added `hasWorkboard` flag so we can do a couple of things a little faster (see T6961).
Test Plan:
- Ran migration.
- Verified a bunch of projects looked sensible/correct after the migration.
- Created a workboard, verified `hasWorkboard` got set properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6961, T10054
Differential Revision: https://secure.phabricator.com/D15093
Summary:
Ref T10054. Uncreated workboards feel a little awkward right now because you lose the menu. Instead, keep the menu.
I also plan to:
- add a "[X] Make the workboard the default view for this project." checkbox; and
- resolve T6961.
...which will touch this workflow, so modernize/straighten it out.
Test Plan:
Viewed workboard, no access state, empty state. Created empty board, imported board.
{F1066973}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6961, T10054
Differential Revision: https://secure.phabricator.com/D15091
Summary: Ref T10054. This is all pretty straightforward. Also include some project-specific examples in the project documentation.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15090
Summary:
Ref T10054.
- Just let users delete non-builtin items.
- Let users choose a default item explicitly.
- Do a better job of cleaning up items which no longer exist or belong to uninstalled applications.
(NOTE) This has one user-facing change: workboards are no longer the default on projects with workboards. I think this is probably OK since we're giving users a ton of new toys at the same time, but I'll write some docs at least.
Test Plan:
- Deleted custom items.
- Disabled/enabled builtin items.
- Made various things defaults.
- Uninstalled Maniphest, saw Workboards tab disappear entirely.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15089
Summary: Fixes T5819. Adds configuration for setting color labels on projects and changing the default. Options are locked to what we make available.
Test Plan: {F1066823}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5819
Differential Revision: https://secure.phabricator.com/D15088
Summary: `alterClass()` is strict about true/false but we set 0/1 elsewhere.
Test Plan: Collapsed/expanded menu, reloaded expanded menu, clicked collapse, got immediate collapse.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15087
Summary:
Fixes T10196. This is a weird interaction and this might not be the best long-term fix, but just get it working OK for now.
General problem is that Quicksand doesn't currently use GET for requests. This is a very unusual case where the method is relevant. In the future, I might change Quicksand to use GET.
Test Plan: Clicked "Open Tasks" with Quicksand active, got a results list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10196
Differential Revision: https://secure.phabricator.com/D15082
Summary: Fixes T8762.
Test Plan: Ran `bin/storage upgrade --namespace ... --user limited`, saw a more specific error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8762
Differential Revision: https://secure.phabricator.com/D15080
Summary: Mostly a visual spacing pass, also adds in circle icons for edit, collapse. For now removing the fixed position on the icons for simplicity while the basics are being polished.
Test Plan: Projects, Profiles, wide and narrow.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15081
Summary:
Ref T10195. Distinguish between "database does not exist" and "database exists, you just don't have permission to access it".
We can't easily get this information out of INFORMATION_SCHEMA but can just `SHOW TABLES IN ...` every database that looks like it's missing and then look at the error code.
Test Plan:
- Created a user `limited` with limited access.
- Ran `bin/storage adjust`.
- Got hopefully more helpful messages about access problems, instead of "Missing" errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10195
Differential Revision: https://secure.phabricator.com/D15079
Summary:
Ref T10188. If you issue certain queries which use reverse ordering (like "All tasks, oldest update to newest update") and then try to page forward, we build the paging clause without reversing the column order correctly.
For example, the ordering of "oldest update to newest update" is "dateModified ASC, id ASC", so the second page should include an "id > X" query. Currently, this builds as "id < X" incorrectly instead.
The cause of this is just a failure to re-reverse a reversing flag when constructing the paging clause.
Test Plan:
- Queried tasks by update, oldest to newest, with no grouping, etc.
- Paged to second page.
- After change, got a valid second page with a good query in the Services tab.
- Made some other normal queries.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10188
Differential Revision: https://secure.phabricator.com/D15076
Summary: Fixes T10192. This key improves some common queries and is not currently present.
Test Plan: See discussion in T10192. Verified current query plan of real queries is garbage and improved by adding this key.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10192
Differential Revision: https://secure.phabricator.com/D15075
Summary: This is unused and there's no way to even set it. Pretty sure it died a while ago when we switched app icons to FontAwesome.
Test Plan: Grepped for `appIcon`, found no related hits. Browsed some pages.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15074
Summary:
Fixes T10186. After D14970, `diffusion.filecontentquery` puts the content in a file and returns the file PHID.
However, it does this in a way that doesn't go through the chunking engine, so it will fail for files larger than the chunk threshold (generally, 8MB).
Instead, stream the file from the underlying command directly into chunked storage.
Test Plan:
- Made a commit including a really big file: 4dcd4c492b
- Used `diffusion.filecontentquery` to load file content.
- Parsed/imported commit locally.
- Used `diffusion.filecontentquery` to load content for smaller files (README, etc).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10186
Differential Revision: https://secure.phabricator.com/D15072
Summary: We plan to use these more in future mocks. Adds base colors and re-uses in Phame.
Test Plan: Phame, mobile and desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15069
Summary: Ref T10054. This is mostly for completness so I can reference it when closing all the related tasks.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15066
Summary:
Ref T10054. Ref T6113. Users can currently subscribe to projects, which causes them to receive:
# mail about project membership changes, description changes, etc; and
# mail to the project, e.g. when the project is added as a subscriber on a task, or a reviewer on a revision.
Almost no one cares about (1), and after D15061 you can use Herald to get this stuff if you really want it. (It will get progressively more annoying in the future with external membership sources causing automated project membership updates.)
A lot of users are confused about (2) and how it relates to membership, watching, etc, and most users who want (2) don't want (1).
Instead, add an explicit option for this and explain what it does.
This is fairly verbose but I've hidden it on the member/watch screen, which is now the "explain how projects work" screen, I guess.
Test Plan:
{F1064929}
{F1064930}
{F1064931}
- Disabled/enabled mail for a project.
- Sent mail to a project with mail disabled, verified I didn't get a copy.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6113, T10054
Differential Revision: https://secure.phabricator.com/D15065
Summary:
Ref T6183. Ref T10054. Historically, only members could watch projects because there were some weird special cases with policies. These policy issues have been resolved and Herald is generally powerful enough to do equivalent watches on most objects anyway.
Also puts a "Watch Project" button on the feed panel to make the behavior and meaning more obvious.
Test Plan:
- Watched a project I was not a member of.
- Clicked the feed watch/unwatch button.
{F1064909}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6183, T10054
Differential Revision: https://secure.phabricator.com/D15063
Summary: Ref T10054. There is no technical or product reason not to support this, and it is largely analogous to removing subscribers.
Test Plan:
- Removed watchers.
- Removed members.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15062
Summary:
Ref T10054. Ref T6113. I'm going to remove subscribers from projects to fix the confusion between "watch" and "subscribe".
Users who have unusual use cases where they legitimately want to know when a project's description is updated or members change can use Herald to follow it.
This is also useful in general and improves consistency, although I don't have too many use cases for it.
Test Plan: Wrote a Herald rule, edited a project, saw the rule fire and send me email about the change.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6113, T10054
Differential Revision: https://secure.phabricator.com/D15061
Summary:
Ref T10054. This shuffles some stuff around to move us closer to mocks in M1450 in terms of what information is on which pages.
Home now has feed, members, watchers, link to "edit project / project edit history".
History now has edit history, edit details, edit picture, archive/unarchive.
Test Plan:
New home page:
{F1064889}
New edit/history page:
{F1064890}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15060
Summary:
Ref T10054. This tries to make the members page a bit more consistent and provide hints to users about subproject/milestone membership rules. In particular:
- You now join, leave, watch, unwatch, add and remove members, and lock and unlock membership from the members screen.
- We now explain the membership rule for the project on this screen. There are currently four rules:
- Normal Project: Join/leave normally.
- Parent Project: Uses subprojects to determine members.
- Milestone: Uses parent project to determine members.
- Locked: Membership is locked.
- (Future) Imported from LDAP/other external sources: Membership is determined by something else.
Test Plan: {F1064878}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15059
Summary:
Ref T10054. I think this gets everything except:
- circles on icons;
- I spent ~15 minutes poking at animations but wasn't able to get anything that looked reasonable whatsoever.
Test Plan:
- Collapsed menus.
- Expanded menus.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15056
Summary: Ref T10010. Fixes T10107. When we publish a transaction about a project, we perform visibility checks for many different users. We need to know all of the ancestors' members to perform these checks.
Test Plan:
- Before patch: when updating a subproject, daemons fatal trying to publish things because they can not test visibility of parent projects.
- After patch: daemons successfully publish subproject updates.
- Also added a unit test.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10010, T10107
Differential Revision: https://secure.phabricator.com/D15054
Summary: Ref T10054. The daemons look for this but currently can't find it.
Test Plan: Ran daemons, clean exit on profile menu edits instead of permanent failure.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15053
Summary: These are old project image choices, remove and only go with FontAwesome related images.
Test Plan: Project -> Edit Picture -> Save
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15051
Summary: Removes header gradient images for flat, CSS controlled colors. I didn't convert the "pony" colors over, going with few options for easier theme-ability.
Test Plan:
Test each color choice.
{F1063828}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15052
Summary:
Fixes T6856. Fixes T10164.
- Make the profile image composer code use the underlying icon name instead of the top-level icon key, so it works instead of 404'ing.
- Change the button to show a preview of the profile icon instead of the text "Use Icon and Color".
- When creating a new non-milestone project, automatically set the profile image to the icon + color image.
Test Plan:
- Created several new projects, saw appropriate default icons.
- Edited projects, saw icon previews.
- Clicked icon buttons to set icons.
- Poked around other applications which use builtins (Pholio, user profiles) to look for anything I broke, but everything seemed fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6856, T10164
Differential Revision: https://secure.phabricator.com/D15050
Summary: Ref T4245. Fixes T10172. These regular expressions were simply incorrect: they intend `<start> (form one | form two) <end>` but were written as `(<start> form one) | (form two <end>)` which allowed stuff like "R2/R13" to be interpreted as a monogram because it matches `(<start> form one)`.
Test Plan: Parsed commit `ba46ffa6169c` from RTEMS repository, see T10172. Before patch, got an identical trace; after patch, clean import.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T4245, T10172
Differential Revision: https://secure.phabricator.com/D15049
Summary:
Ref T10168. When we try to remove an additional hashtag, we remove the normalized version.
Instead, remove both the literal and normalized versions. This allows us to remove old/invalid slugs.
Test Plan: Removed garbage slugs like `[,*,]`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10168
Differential Revision: https://secure.phabricator.com/D15048
Summary:
Ref T10168.
Around October 12, T9551 made project hashtags stricter and prevented them from containing characters like comma (`,`).
Around December 27, D14888 changed how hashtags queries work so that the query does normalization instead of requiring the caller to normalize.
After the Dec 27 change, projects from before Oct 12 with now-invalid hashtags will no longer load when queried directly by hashtag, because the page queries for `old,[silly]hash,,tag` or whatever, it gets normalized into `old_silly_hash_tag`, and then there are no hits.
Instead, at least for now, query by both the exact raw text and the normalized hashtag. This should keep older stuff working until we can give users more support for migrating forward.
Test Plan:
- Forced a project to have a bogus hahstag.
- Before patch: clicking its tag 404'd.
- After patch: clicking its tag now works.
- Visited a project by alternate hashtag.
- Visited a project by denormalized hashtag and alternate hashtag (e.g., capital letters instead of lowercase letters), saw it redirect/normalize properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10168
Differential Revision: https://secure.phabricator.com/D15047
Summary: Icon in a circle. Base class, not much in the way of color choices.
Test Plan:
UIExamples, Chrome.
{F1062027}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D15034
Summary: Ref T10168. When we render this control, we currently don't put commas into the value correctly if there are multiple alternative hashtags.
Test Plan: Edited a project with multiple alternate hashtags. Before change: they all got smushed together. After change: properly comma-separated.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10168
Differential Revision: https://secure.phabricator.com/D15045
Summary: Fixes T10169. Diffs with no build targets were incorrectly showing as though they had no test coverage, when we actually want to show them having no coverage information available.
Test Plan: Viewed an older revision, saw a column of "Not Executable" before change, now see no column.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10169
Differential Revision: https://secure.phabricator.com/D15044
Summary: Fixes T10167. We were dropping infrastructure joins.
Test Plan: Queried for questions by project.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10167
Differential Revision: https://secure.phabricator.com/D15043
Summary: Motivate your employees with inspirational quotes. A new quote every day!
Test Plan: So inspirational.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15026
Summary: Ref T10054. People, projects, and instances no longer use icon nav, so we can get rid of it in favor of profile menus.
Test Plan: Grepped for everything, looked through workboards/profiles again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15022
Summary:
Ref T10054. Primary goal is to be able to remove IconNav from the codebase.
I've made these non-editable so users can't customize them yet. We //might// want administrators to customize these globally instead? In any case, we avoid a bunch of product questions by just locking these down for now.
Test Plan: {F1061348}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15020
Summary: Ref T10054. Take specialization off the objects and put it on Engine subclasses instead. One reason for this is that certain objects (like users) might have multiple different sets of panels in the future (e.g., their user profile and their home page).
Test Plan:
- No user-visible changes.
- PanelEngine no longer has any hardcoded "project" stuff.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15018
Summary:
Ref T10054. This makes the profile menu full-height. It uses two pieces of dark magic:
- `calc()`, which allows you to do math in CSS.
- The `vh` unit, which is CSS for "viewport height".
Apparently this kind of stuff just works now? CSS got good at some point?
Test Plan:
- Page looks correct in Safari, Chrome, Firefox.
- Checked `caniuse.com` for `vh` and `calc()`, saw they're supported?
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15017
Summary:
Ref T10054. I haven't done any of the big-picture layout stuff yet, but this should get look-and-feel somewhere in the ballpark of reasonablness, I think.
Major missing stuff:
- No "collapse" state or action yet.
- Menu is not full-height (requires changes to the rendering pipeline).
Test Plan: {F1060941}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15016
Summary: Ref T3725. This probably has 900,000 bugs. This will need updates for subprojects/milestones.
Test Plan:
- Tested very gently in Safari, Firefox and Chrome.
- Reasonable inputs appear to work.
- Clicking, escape, tab, return, arrow keys work OK?
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3725
Differential Revision: https://secure.phabricator.com/D15029
Summary: Ref T10054. Just simplifying this a bit before I start laying in the new profile menus.
Test Plan:
- Viewed Diviner on desktop and checked the mobile menu.
- Viewed Files on desktop and checked the mobile menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15015
Summary:
Ref T10054.
I made this a dropdown (currently: "Visible" or "Disabled") since I imagine we //miiiight// want to add a "Hidden, but click 'More' to reveal" state or do other special stuff in this vein. Not 100% sold on that but seemed within the realm of plausibility.
Test Plan: {F1060759}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15012
Summary: Ref T10054. Allows users to drag menu items to reorder them.
Test Plan: Reordered a project menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15011
Summary:
Ref T10054. This does a big chunk of the legwork to let users reconfigure profile menus (currently, just project menus).
This includes:
- Editing builtin items (e.g., you can rename the default items).
- Creating new items (for now, only links are available).
This does not yet include:
- Hiding items.
- Reordering items.
- Lots of fancy types of items (dashboards, etc).
- Any UI changes.
- Documentation (does feature: TODO link for documentation).
Test Plan:
{F1060695}
{F1060696}
{F1060697}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15010
Summary:
hack hack hack
(`class_exists()` no longer throws in a libphutil environment.)
Test Plan: derpaderp
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D15013
Summary: Fixes T10139. This clarification seems reasonable to me.
Test Plan:
- Viewed a revision with context.
- Clicked "Show All Context".
- Saw "All Context Shown".
{F1060624}
{F1060625}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10139
Differential Revision: https://secure.phabricator.com/D15009
Summary: Ref T10054. This mostly makes sure that mobile gets to have the same profile menu that Desktop does.
Test Plan:
- Viewed menus on mobile, saw all profile menu actions available.
- Viewed/used changed pages (column detail, edit column, edit picture).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15008
Summary: Ref T10054. This has no product impact, but prepares us for customizable side nav on "profiles" (today, projects; probably users some day; and maybe other stuff down the road).
Test Plan: Clicked all links on a profile, everything was exactly the same as before.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10054
Differential Revision: https://secure.phabricator.com/D15007
Summary:
Ref T4705 (there are also some other adjacent related tasks dealing with URIs).
Currently, we issue a "get repositories matching URIs: ..." query by loading every possible repository and then checking their URIs in PHP.
Instead, put URIs in a separate table. I plan for each repository to potentially have multiple URIs soon, so this prepares for that.
Test Plan:
- Ran migrations.
- Looked at index table, made sure it appeared sensible.
- Ran some queries by `uri` to find repositories, found the repositories I expected.
- Updated the remote URI of a repository, saw queries / index update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4705
Differential Revision: https://secure.phabricator.com/D15005
Summary: Fixes T10096. The `**` was being parsed as part of the hashtag, so `**#asdf**` interpreted `#asdf**` as a hashtag.
Test Plan: Unit test; bolded stuff with hashy contents.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10096
Differential Revision: https://secure.phabricator.com/D15006
Summary:
Fixes T10135. When the viewer is a member of no projects, specify the constraint type as a new "EMPTY" type.
When a query has an "EMPTY" constraint, fail fast with no results.
Test Plan:
- Viewed a viewerprojects() query result set as a user in no projects.
- Before patch: got a lot of hits. After patch: no hits.
- Viewed a normal result set, no changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10135
Differential Revision: https://secure.phabricator.com/D15003
Summary: A lot of confusing stuff happens when you create a milestone or subproject which isn't explained clearly in the UI. This is causing more harm than good on the balance since we're still figuring out how to move forward here. Just turn it off for now until we're closer to pushing it forward.
Test Plan: Viewed a project, no more UI for subprojects or milestones.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14999
Summary:
See IRC. We're supposed to repair configuration, but if custom validators throw a generic `Exception` or use `PhutilTypeSpec` to do a check, we may explode way harder than we intend to.
Instead, soften these exceptions into validation exceptions so we repair configuration, raise a setup issue, and continue.
Test Plan: {F1059609}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14998
Summary:
Ref T10121. This doesn't work at all at HEAD, and even when it did it was mostly just confusing to installs with unexpected setups where Phabricator is receiving mail at `@mycompany.com` and this is colliding with real addresses.
It might make sense to restore it some day after the next Conphernece update, but just strip it out for now. Since it doesn't work anyway, I'm pretty confident no one is using it.
Test Plan:
- Before patch: send mail to `dog@local.phacility.com`, got a policy error from Conpherece.
- After patch: sent mail to `dog@local.phacility.com`, got a correct "no routable recipients" error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10121
Differential Revision: https://secure.phabricator.com/D14997
Summary:
Ref T10121. If a user sends mail with duplicate headers, like:
```
X-Duplicate: A
X-Duplicate: B
```
...and we process it with `mail_handler.php`, we may end up with `array('A', 'B')` as the header value. When we try to write this back into an error response mail, it fails.
Test Plan:
- Generated a message with duplicate headers.
- Piped it into `mail_handler.php` with `--process-duplicates` and `--trace` to get a look at it.
- Faked an exception.
- Before patch: bad error email.
- After patch: clean error email showing multiple header values.
```
$ ./bin/mail show-outbound --id 12386
PROPERTIES
ID: 12386
Status: queued
Related PHID:
Message:
PARAMETERS
sensitive: 1
is-error: 1
force: 1
subject: Error Processing Mail (Exception)
raw-to: ["epriestley@phacility.com"]
HEADERS
X-Phabricator-Sent-This-Message: Yes
X-Mail-Transport-Agent: MetaMTA
X-Auto-Response-Suppress: All
TEXT BODY
Your email to Phabricator was not processed, because an error occurred while
trying to handle it:
Exception: TEST
-- Original Message Body -----------------------------------------------------
testy testy
-- Original Message Headers --------------------------------------------------
from: Evan Priestley <epriestley@phacility.com>
content-type: text/plain; charset=us-ascii
content-transfer-encoding: 7bit
x-smtp-server: smtp.gmail.com:epriestley@phacility.com
subject: test outbound mail
message-id: 7isvptmllqvdvtdxthvdwzg3woj5au7csyuh3hopypjv6y6hqb32qm4bcrd4jtid
x-universally-unique-identifier: 4E489E20-F674-49B2-94BA-0DE44F504EAA
date: Mon, 11 Jan 2016 09:50:12 -0800
date: Mon, 11 Jan 2016 09:50:13 -0800
date: Mon, 11 Jan 2016 09:50:14 -0800
date: Mon, 11 Jan 2016 09:50:15 -0800
to: epriestley@yghe.net
mime-version: 1.0 (Mac OS X Mail 8.2 \(2104\))
HTML BODY
(This message has no HTML body.)
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10121
Differential Revision: https://secure.phabricator.com/D14996
Summary: Fixes T8826. Git tracks an "author date", which may be different from the "committed date". We don't currently extract/show this; do so.
Test Plan: {F1059235}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8826
Differential Revision: https://secure.phabricator.com/D14995
Summary:
Fixes T10117.
- I accidentally broke setting `null` to unassign tasks at some point when I added richer validation.
- Raise a better error if the user passes junk.
Test Plan:
- Unassigned a task via API and web UI.
- Reassigned a task via API and web UI.
- Tried to do an invalid assign via API, got a sensible error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10117
Differential Revision: https://secure.phabricator.com/D14992
Summary: Ref T4245. Full commit display names (like `rPaaaa`) are going to be obnoxious soon in some cases (e.g., `rPaaaa` becomes `R123:aaaa`, which is much uglier) so reduce how often we show the repository in cases where it isn't really necessary to include it.
Test Plan:
- Saw no more `rX` on repository list view for Git/Mercurial (still present for Subversion).
- Saw no more `rX` on various repository detail views, except when referencing other commits (e.g., mentions).
- Grepped for removed `getShortName()`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14990
Summary:
Ref T4245.
- Rename "Clone/Checkout As" to "Short Name" in the UI.
- Allow any repository to have a short name, not just hosted repositories.
Test Plan:
- Ran migration.
- Reviewed old transactions, saw they looked good.
- Edited an existing repository's short name.
- Gave an imported repository a new short name.
- Removed a repository's short name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14989
Summary:
Ref T4245. This allows `bin/repository update bread` to work, in addition to `rBREAD`, `R123`, `123`, `BREAD`, etc., if a repository has a short name set.
This primarily affects CLI commands (like `bin/repository`) and Conduit API calls. It has no normal user-facing impact.
Test Plan: Ran `bin/repository update bread` and such.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D14988
Summary:
Via HackerOne. The use of `$key` here should be `$extended_key`.
Exploiting this requires a very unusual group of objects to be subjected to extended policy checks. I believe there is no way to actually get anything bad through the policy filter today, but this could have been an issue in the future.
Test Plan:
- Added a unit test which snuck something through the policy filter.
- Fixed use of `$extended_key`.
- Test now passes.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14993
Summary:
Fixes T7938.
- Primarily, users can currently shoot themselves in the foot by putting `../../etc/passwd` and other similar nonsense in these fields (this is not dangerous, but also does not work). Require sensible names.
- Enforce uniqueness so these names can be used in URIs and as identifiers in the future.
- (This doesn't start actually using them for anything fancy yet.)
Test Plan:
- Gave several repositories clone names: a valid name, two duplicate names, an invalid, name, some with no names.
- Ran migrations.
- Got clean conversion for valid names, appropriate errors for invalid/duplicate names.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7938
Differential Revision: https://secure.phabricator.com/D14986
Summary:
If you try to pull the hovercard of something you can no longer see (maybe you loaded the page, then the policy changed) there won't be a value in the array here.
(The rest of the code anticipates this possibility.)
Test Plan: Hovered some stuff.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14987
Summary: See Q266.
Test Plan: Created a bulk job, clicked "Details" instead of "Confirm", clicked "Continue" to get back to confirmation dialog.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14985
