Summary: Depends on D19652. Ref T13197. See PHI851. This migrates the actual `auditStatus` on Commits, and older status transactions.
Test Plan:
- Ran migrations.
- Spot-checked the database for sanity.
- Ran some different queries, got unchanged results from before migration.
- Reviewed historic audit state transactions, and accepted/raised concern on new audits. All state transactions appeared to generate properly.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19655
Summary: Depends on D19651. Ref T13197. The application now accepts either numeric or string values. However, for consistency and to reduce surprise in the future, migrate existing saved queries to use string values.
Test Plan: Saved some queries on `master` with numeric constants, ran the migration, saw string constants in the database and equivalent behavior in the UI.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19652
Summary: See PHI871. Ref T13197. These sections are only divided visually and don't have textual headers. Add aural headers.
Test Plan: {F5875471}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13197
Differential Revision: https://secure.phabricator.com/D19654
Summary:
Ref T13195. If a Phriction page begins with a code block, the `clear: both;` currently makes it clear the action list.
Instead, use table-cell layout on desktops.
Test Plan: Viewed a Phriction page with an initial code block on desktop/tablet/mobile/printable layouts. Now got more sensible layouts in all cases.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: GoogleLegacy
Maniphest Tasks: T13195
Differential Revision: https://secure.phabricator.com/D19649
The unique key on <documentPHID, version> may fail to apply if any content
rows don't have a valid document. This is rare, but we have some old random
garbage rows on "secure.phabricator.com" which prevent the next patch from
applying. Just toss these rows, they're junk.
Summary:
Ref T13077. We need to know the maximum version of a document in several cases, so denormalize it onto the Document object.
Then clean up some behaviors where we edit a document with, e.g., 7 versions but version 5 is currently published. For now, we: edit starting with version 7, save as version 8, and immediately publish the new version.
Test Plan:
- Ran migration.
- Edited a draft page without hitting any weird version errors.
- Checked database for sensible `maxVersion` values.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19625
Summary:
See T13193. See T13077. If we drop a column which is part of a UNIQUE KEY, MariaDB raises an error.
This is probably a bad idea on our side anyway, but in this case it wasn't an obviously bad idea.
To get around this:
- Drop the unique key, if it exists, before dropping the column.
- Explicitly add the new unique key afterward.
Test Plan: Ran `bin/storage upgrade` locally without issue, but I'm on MySQL. Will follow up on T13193.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19624
Summary: Depends on D19621. Ref T13077. Fixes T4815. This adds previous/current/next/draft buttons and makes navigation between unpublished and published versions of a document more clear.
Test Plan: {F5841997}
Reviewers: amckinley
Maniphest Tasks: T13077, T4815
Differential Revision: https://secure.phabricator.com/D19622
Summary: Depends on D19619. Ref T13065. Ref T13077. Migrate Phriction mail keys to the new infrastructure and drop the column.
Test Plan: Ran migrations, spot-checked the database.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13077, T13065
Differential Revision: https://secure.phabricator.com/D19620
Summary:
Ref T13077. This is mostly just a small cleanup change, even though the actual change is large.
We currently reference content and document objects from one another with `contentID` and `documentID`, but this means that `contentID` must be nullable. Switching to PHIDs allows the column to be non-nullable.
This also supports reorienting some current and future transactions around PHIDs, which is preferable for the API. In particular, I'm adding a "publish version X" transaction soon, and would rather callers pass a PHID than an ID or version number, since this will make the API more consistent and powerful.
Today, `contentID` gets used as a cheaty way to order documents by (content) edit time. Since PHIDs aren't orderable and stuff is going to become actually-revertible soon, replace this with an epoch timestamp.
Test Plan:
- Created, edited, moved, retitled, and deleted Phriction documents.
- Grepped for `documentID` and `contentID`.
- This probably breaks //something// but I'll be in this code for a bit and am likely to catch whatever breaks.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19619
Summary:
Depends on D19616. Ref T13077. Fixes T8172. In the last round of design updates, a lot of actions got stuffed into "Actions" menus.
I never really got used to these and think they're a net usability loss, and broadly agree with the feedback in T8172. I'd generally like to move back toward a state where actions are available on the page, not hidden in a menu.
For now, just put a curtain view on these pages. This could be refined later (e.g., stick this menu to the right hand side of the screen) depending on where other Phriction changes go.
(Broadly, I'm also not satisfied with where we ended up on the fixed-width pages like Diffusion > Manage, Config, and Instances. In contrast, I //do// like where we ended up with Phortune in terms of overall design. I anticipate revisiting some of this stuff eventually.)
Test Plan:
- Looked at Phriction pages on desktop/tablet/mobile/printable -- actions are now available on the page.
- Looked at other DocumentView pages (like Phame blogs) -- no changes for now.
Reviewers: amckinley
Maniphest Tasks: T13077, T8172
Differential Revision: https://secure.phabricator.com/D19617
Summary: Ref T13189. See PHI710. Ref T13088. Fixes T9951. Allow callers to `harbormaster.sendmessage` to specify that the test details are remarkup so they can use rich formatting and include links, files, etc.
Test Plan: {F5840098}
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13189, T13088, T9951
Differential Revision: https://secure.phabricator.com/D19615
Summary: Ref T13189. See PHI690. When a lease is first acquired or activated, note the time. This supports better visibility into queue lengths. For now, this is only queryable via DB and visible in the UI, but can be more broadly exposed in the future.
Test Plan: Landed a revision, saw the leases get sensible timestamps for acquisition/activation.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19613
Summary:
Ref T13187. See PHI836. The "action" comment actions in Differential (Accept, Reject, etc) render a single line of descriptive text. This is currently slightly misaligned.
Give it similar sizing information to the label element to the left, so it lines up properly.
Test Plan:
Note that "Request Review" and "This revision will be..." are now aligned:
{F5828077}
Reviewers: amckinley
Maniphest Tasks: T13187
Differential Revision: https://secure.phabricator.com/D19600
Summary:
Depends on D19594. See PHI823. Ref T13164.
- Add a label for the "X" button in comment areas, like "Remove Action: Change Subscribers".
- Add a label for the floating header display options menu in Differential.
- Add `role="button"` to `PHUIButtonView` objects that we render with an `<a ...>` tag.
Test Plan:
Viewed a revision with `?__aural__=true`:
- Saw "Remove Action: ..." label.
- Saw "Display Options" label.
- Used inspector to verify that some `<a class="button" ...>` now have `<a class="button" role="button" ...>`. This isn't exhaustive, but at least improves things. A specific example is the "edit", "reply", etc., actions on inline comments.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19595
Summary:
Ref T13164. See PHI748. Path validation has a 750ms timeout which blames to rP5038ab850c, in 2011.
Production path validation is sometimes taking more than 750ms, particularly on the initial page load where we may validate many paths simultaneously.
I have no idea why we have this timeout, and it isn't consistent with how we perform other AJAX requests. Just remove it.
Test Plan:
- Reproduced issue in production, saw all validation calls failing at 750ms. Actual underlying calls succeed, they just take more than 750ms to resolve.
- Loaded path validator locally, got green checkmark.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19575
Summary:
Ref T13164. See PHI693. In Differential, you can {nav View Options > View Standalone} to get a standalone view of a single changeset. You can also arrive here via the big changeset list for revisions affecting a huge number of files.
We currently suggest that all the keyboard shortcuts work, but some do not. In particular, the "Next File" and "Previous File" keyboard shortcuts (and some similar shortcuts) do not work. In the main view, the next/previous files are on the same page. In the standalone view, we'd need to actually change the URI.
Ideally, we should do this (and, e.g., put prev/next links on the page). As a first step toward that, hide the nonfunctional shortcuts to stop users from being misled.
Test Plan:
- Viewed a revision in normal and standalone views.
- No changes in normal view, and all keys still work ("N", "P", etc).
- In standalone view, "?" no longer shows nonfunctional key commands.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19571
Summary: Ref T12164. Defines a new manual activity that suggests rebuilding repository identities before Phabricator begins to rely on them.
Test Plan:
- Ran migration, observed expected setup issue: {F5788217}
- Ran `bin/config done identities` and observed setup issue get marked as done.
- Ran `/bin/storage upgrade --apply phabricator:20170912.ferret.01.activity.php` to make sure I didn't break the reindex migration; observed reindex setup issue appear as expected.
- Ran `./bin/config done reindex` and observed reindex issue cleared as expected.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19497
Summary:
Ref T13164. See PHI774. Fixes T12435.
Since Phriction is hierarchical, there isn't a super strong motivation to support Spaces: you can generally set policies on a small number of documents to get the desired effective policy behavior.
However, it still improves consistency and there's no reason //not// to support Spaces. In the case where you have some moderately weird/complex policy on one or more Spaces, using Spaces to define the policy behavior can make things a bit simpler and easier to understand.
This probably doesn't actually fix whatever the root problem in T12435 was (complicated, non-hierarchical access policies?). See also a bunch of discussion in T12442. So we might end up going beyond this to address other use cases, but I think this is reasonable regardless.
Test Plan: Created and edited Phriction documents and shifted them between Spaces. Searched by Space, etc.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13164, T12435
Differential Revision: https://secure.phabricator.com/D19553
Summary:
Depends on D19551. Ref T13164. Projects use a special kind of header setup that has a more specific CSS rule to make content black. Add an even more specific rule to make it red.
(This could probably be disentangled a bit and isn't necessarily the cleanest fix, but I poked at it for a few minutes and didn't come up with anything cleaner.)
Test Plan: Viewed projects in spaces, saw the space names colored red properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19552
Summary:
See PHI774. Ref T13164. There is no reason projects //don't// support Spaces, just a vague concern that it's not hugely useful and might be a bit confusing.
However, it's at least somewhat useful (to improve consistency and reduce special casing) and doesn't necessarily seem more confusing than Projects are anyway. Support is trivial from a technical point of view, so just hook it up.
Test Plan: Created new projects, shifted projects between spaces. The support is all pretty much automatic.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19549
Summary:
Ref T13151. See PHI685. When you haunt the panel, we only let it take up part of the screen. Let it take up slightly more of the screen so that it's more likely to fit completely on-screen without needing to scroll.
The behavior when it does scroll is fine (you get a scrollbar if your OS/browser is set up to show them) so this is a bit trivial/silly, but seems fine and doesn't have a big JS maintenance cost or anything.
Test Plan: Pressed "Z", resized my window to a weird tiny useless size, got slightly better (I guess) behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19480
Summary: Ref T13151. See PHI616. There's a bug where the current banner changeset isn't cleared correctly when we hide the banner.
Test Plan:
- View revision with several changesets.
- Scroll down slowly through first changeset until banner appears.
- Scroll up until banner disappears.
- Scroll back down.
- Before: banner fails to reappear (code still thinks it's visible and we don't want to update it).
- After: banner reappears correctly.
Reviewers: amckinley, jmeador
Reviewed By: jmeador
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19474
Summary:
Fixes T13148. Ref T13105. The new document rendering engine for images let them overflow the UI bounds.
Add `max-width: 100%;` to keep them contained.
Test Plan:
- Viewed a very wide image in Safari, Firefox and Chrome. Saw sensible rendering.
- Also viewed a normal image, saw normal behavior.
Reviewers: amckinley, avivey
Reviewed By: avivey
Maniphest Tasks: T13148, T13105
Differential Revision: https://secure.phabricator.com/D19457
Summary:
Fixes T13147. In D19437, I changed this logic to support deleting the `""` (empty string) token, but `[].pop()` returns `undefined`, not `null`, if the list is empty and I didn't think to try deleting an empty input.
Fix the logic so we don't end up in a loop if the input is empty.
Test Plan:
- In any browser, deleted all tokens in a tokenizer; then pressed delete again.
- Before: tab hangs in an infinte loop.
- After: smooth sailing.
Reviewers: amckinley, avivey
Reviewed By: avivey
Maniphest Tasks: T13147
Differential Revision: https://secure.phabricator.com/D19456
Summary: Depends on D19429. Depends on D19423. Ref T12164. This creates new columns `authorIdentityPHID` and `committerIdentityPHID` on commit objects and starts populating them. Also adds the ability to explicitly set an Identity's assignee to "unassigned()" to null out an incorrect auto-assign. Adds more search functionality to identities. Also creates a daemon task for handling users adding new email address and attempts to associate unclaimed identities.
Test Plan: Imported some repos, watched new columns get populated. Added a new email address for a previous commit, saw daemon job run and assign the identity to the new user. Searched for identities in various and sundry ways.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19443
Summary: Depends on D19423. Ref T12164. Adds controllers capable of listing and editing `PhabricatorRepositoryIdentity` objects. Starts creating those objects when commits are parsed.
Test Plan: Reparsed some revisions, observed objects getting created in the database. Altered some `Identity` objects using the controllers and observed effects in the database. No attempts made to validate behavior under "challenging" author/committer strings.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19429
Summary: Ref T12164. Start building initial objects for managing `RepositoryIdentity` objects. This won't land until much more of the infrastructure is in place.
Test Plan: Ran `bin/storage upgrade` and observed expected table.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19423
Summary:
See PHI652. When you `echo x | arc paste` today, you end up with a Paste object that has the empty string as its "language".
This is normally not valid. Pastes where the language should be autodetected should have the value `null`, not the empty string.
This behavior likely changed when `paste.create` got rewritten in terms of `paste.edit`. Adjust the implementation so it only adds the LANGUAGE transaction if there's an actual language.
Also, fix an issue where you can't use the "delete" key to delete tokens with the empty string as their value.
Test Plan:
- Created a paste with `echo x | arc paste`, got a paste in autodetect mode instead of with a bogus language value.
- Created a paste with `echo x | arc paste --lang rainbow`, got a rainbow paste.
- Deleted an empty string token with the keyboard.
- Deleted normal tokens with the keyboard.
- Edited subscribers/etc normally with the keyboard and mouse to make sure I didn't ruin anything.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19437
Summary:
See PHI624. Some of the mobile navigation and breadcrumbs in support pacts aren't as good as they could be.
In particular, we generally collapse crumbs on mobile to just the first and last crumbs. The first crumb is the application; the last is the current page.
On `/PHIxxx` pages, the first crumb isn't very useful since the Support landing page is two levels up: you usually want to go back to the pact, not all the way back to the Support landing page.
We also don't need the space since the last crumb (`PHIxxx`) is always small.
Allow Support and other similar applications to tailor the crumb behavior more narrowly if they end up in situations like this.
Test Plan:
- With an additional change to instances (see next diff), viewed a support issue page (`/PHI123`) on mobile and desktop.
- Saw a link directly back to the pact on both mobile and desktop.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19438
Summary:
Depends on D19427. Ref T13130. See PHI251. Support configuring owners packages so they ignore generated paths.
This is still a little rough. A couple limitations:
- It's hard to figure out how to use this control if you don't know what it's for, but we don't currently have a "CheckboxesEditField". I may add that soon.
- The attribute ignore list doesn't apply to Diffusion, only Differential, which isn't obvious. I'll either try to make it work in Diffusion or note this somewhere.
- No documentation yet (which could mitigate the other two issues a bit).
But the actual behavior seems to work fine.
Test Plan:
- Set a package to ignore paths with the "generated" attribute. Saw the package stop matching generated paths in Differential.
- Removed the attribute from the ignore list.
- Tried to set invalid attributes, got sensible errors.
- Queried a package with Conduit, got the ignored attribute list.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19428
Summary:
Depends on D19426. Ref T13130. Ref T13065. While I'm making changes to Owners for "Ignore generated paths", clean up the "mailKey" column.
We recently (D19399) added code to automatically generate and manage mail keys so we don't need a ton of `mailKey` properties in the future. Migrate existing mail keys and blow away the explicit column on packages.
Test Plan: Ran migration, manually looked at the database and saw sensible data. Edited a package to send some mail, which looked good.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13130, T13065
Differential Revision: https://secure.phabricator.com/D19427
Summary:
See PHI604. Ref T13130. Ref T13105. There's currently no way to turn blame off in Diffusion. Add a "Hide Blame" option to the "View Options" dropdown so it can be toggled off.
Also fix a couple of bugs around this: for example, if you loaded a Jupyter notebook and then switched to "Source" view, blame would incorrectly fail to activate because the original rendering of the "stage" used an asynchronous engine so `willRenderRef()` wasn't called to populate blame.
Test Plan:
- Viewed a source file, toggled blame off/on, reloaded page to see state stick in URL.
- Viewed a Jupyter notebook, toggled to "Source" view, saw blame.
- Viewed stuff in Files (no blame UI options).
- Tried to do some invalid stuff like toggle blame on a non-blame engine (options disable properly).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130, T13105
Differential Revision: https://secure.phabricator.com/D19414
Summary:
Ref T13130. See PHI617.
The new build log UI has tags like `<a href="...">Show More Above <span icon>^</span></a>`. If you click the little "^" icon, the event target is the `<span />` instead of the `<a />` so we expand on the wrong node.
Instead, select the `<a />` by sigil explicitly.
Test Plan: Viewed new log UI in Harbormaster, clicked "^" icon and text, got the same (correct) behavior on both.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19410
Summary:
Ref T13065. `mailKey`s are a private secret for each object. In some mail configurations, they help us ensure that inbound mail is authentic: when we send you mail, the "Reply-To" is "T123+456+abcdef".
- The `T123` is the object you're actually replying to.
- The `456` is your user ID.
- The `abcdef` is a hash of your user account with the `mailKey`.
Knowing this hash effectively proves that Phabricator has sent you mail about the object before, i.e. that you legitimately control the account you're sending from. Without this, anyone could send mail to any object "From" someone else, and have comments post under their username.
To generate this hash, we need a stable secret per object. (We can't use properties like the PHID because the secret has to be legitimately secret.)
Today, we store these in `mailKey` properties on the actual objects, and manually generate them. This results in tons and tons and tons of copies of this same ~10 lines of code.
Instead, just store them in the Mail application and generate them on demand. This change also anticipates possibly adding flags like "must encrypt" and "original subject", which are other "durable metadata about mail transmission" properties we may have use cases for eventually.
Test Plan:
- See next change for additional testing and context.
- Sent mail about Herald rules (next change); saw mail keys generate cleanly.
- Destroyed a Herald rule with a mail key, saw the mail properties get nuked.
- Grepped for `getMailKey()` and converted all callsites I could which aren't the copy/pasted boilerplate present in 50 places.
- Used `bin/mail receive-test --to T123` to test normal mail receipt of older-style objects and make sure that wasn't broken.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13065
Differential Revision: https://secure.phabricator.com/D19399
Summary: Ref T13126. After SourceView changes, embedded pastes with the `{Pxxx}` syntax are line-wrapping line numbers in Safari, at least. Put a stop to this.
Test Plan: Viewed a `{Pxxx}` with more than 10 lines. Before: weird line wrapping; after: nice consistent display.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13126
Differential Revision: https://secure.phabricator.com/D19393
Summary: See discussion in D19379. The 4-tuple of (device, network, address, port) should be unique.
Test Plan: Created lots of duplicate interfaces, bound those interfaces to various services, observed migration script clean things up correctly.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19388
Summary:
Ref T13127. Users with red/green colorblindness may have difficulty using this element in its current incarnation.
We could give it different behavior if the "Accessibility" option is set for red/green colorblind users, but try a one-size-fits-all approach since the red/green aren't wholly clear anwyay.
Test Plan: {F5530050}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13127
Differential Revision: https://secure.phabricator.com/D19385
Summary:
Ref T13124. Ref T13131. Fixes T8953. See PHI512.
When you receieve a notification about an object and then someone hides that object from you (or deletes it), you get a phantom notification which is very difficult to clear.
For now, test that notifications are visible when you open the menu and clear any that are not.
This could be a little more elegant than it is, but the current behavior is very clearly broken. This unbreaks it, at least.
Test Plan:
- As Alice, configured task stuff to notify me (instead of sending email).
- As Bailey, added Alice as a subscriber to a task, then commented on it.
- As Alice, loaded home and saw a notification count. Didn't click it yet.
- As Bailey, set the task to private.
- As Alice, clicked the notification bell menu icon.
- Before change: no unread notifications, bell menu is semi-stuck in a phantom state which you can't clear.
- After change: bad notifications automatically cleared.
{F5530005}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13131, T13124, T8953
Differential Revision: https://secure.phabricator.com/D19384
Summary: Fixes T13129. This at least makes the existing UI work again before we banish Phlux to the shadow realm.
Test Plan: Edited the visibility for a Phlux variable, didn't get an error. Nothing showed up in the edge tables when I made those changes, but at least it doesn't error out anymore.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13129
Differential Revision: https://secure.phabricator.com/D19387
Summary:
The name of networks should be unique.
Also adds support for exact-name queries for AlamanacNetworks.
Test Plan: Applied migration with existing duplicates, saw networks renamed, attempted to add duplicates, got a nice error message.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19379
Summary:
Depends on D19377. Ref T13125. Ref T13124. Ref T13105. Coverage reporting in Diffusion didn't initially survive the transition to Document Engine; restore it.
This adds some tentative/theoretical support for multiple columns of coverage, but no way to actually produce them in the UI. For now, the labels, codes, and colors are hard coded.
Test Plan:
Added coverage with `diffusion.updatecoverage`, saw coverage in the UI:
{F5525542}
Hovered over coverage, got labels and highlighting.
Double-checked labels for "N" (Not Executable) and "U" (Uncovered). See PHI577.
Faked some multi-column coverage, but you can't currently get this yourself today:
{F5525544}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13125, T13124, T13105
Differential Revision: https://secure.phabricator.com/D19378
Summary: Ref T13105. After moving Diffusion to DocumnentEngine, this no longer has callers. It will become part of the document behavior.
Test Plan: Grepped for calls to the `diffusion-browse-file` behavior, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19377
Summary:
Depends on D19349. Ref T13105. This was the behavior in Diffusion before with a little hard-coded snippet.
Remove that snippet ("diffusion-jump-to") and add a more general-purpose snippet to SourceView.
This is a tiny bit hacky still (and probably doesn't work quite right with Quicksand) but gets things working again and works in all of Files, Paste, and Diffusion.
Test Plan: Followed links to particular lines in Paste, Files and Diffusion; got scrolled to the right place.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19350
Summary:
Depends on D19348. Ref T13105. When copying text from Paste or Diffusion, we'd like to copy only source, not line numbers.
We currently accomplish this with zero-width spaces plus a trigger that fires on "copy" in Paste and Diffusion. This is quite gross.
In the new-style Harbormaster logs, we use an approach that seems slightly better: CSS psuedoelements.
This isn't a complete solution (see also PHI504 / T5032) but puts us in a slightly better place.
Use it in Paste/Files/Diffusion too.
This gives us good behavior in all browsers in Files and Paste.
This gives us good behavior in Chrome and Firefox in Diffusion. Safari will copy (but not visually select) blame information in Diffusion. I think we can live with that for now.
Test Plan: Selected and copy/pasted stuff in Diffusion, Files, and Paste. Got good behavior everywhere except Safari + Diffusion.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19349
Summary:
Depends on D19347. Ref T13105. See PHI565. The "highlight lines" behavior is interacting poorly with the new blame element in Diffusion.
Make the behavior a little simpler and hopefully more robust.
Test Plan:
- Clicked commit/revision links in Diffusion, saw the links get followed instead of the lines highlighted.
- Highlighted lines in Diffusion, saw just the line/code highlight instead of the whole thing.
- Highlighted lines in Paste and new-style Harbormaster build logs, saw consistent behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19348
Summary: Depends on D19346. Ref PHI568. I love Javascript.
Test Plan:
- Viewed a revision.
- Dragged file tree view really wide.
- Scrolled document to the right.
- Toggled file tree off and on by pressing "f" twice.
- Before patch: file tree grew wider and wider after it was toggled.
- After patch: file tree stayed the same size after it was toggled.
- Dragged to various widths and reloaded to make sure the "sticky across reloads" behavior still works.
- Scrolled right, dragged the tree a bit, then reloaded and didn't see it flip out.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19347
Summary:
Ref T13105. Previously, the "source code" view in Paste rendered on a brown/orange-ish background. I've been using this element in more contexts (Files, Diffusion) and removed the colored background to make text (particularly syntax-highlighted text) easier to read and reduce visual noise with the new blame colors.
In Diffusion the view is in a box with a white background so removing the background left us with white, but in Paste it's just directly on the page so the background was bleeding through. Instead, set it to white explicitly.
Test Plan: Viewed source files in Files, Diffusion and Paste; saw text on a white background.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19346
Summary:
See PHI568. If you make the file tree UI very wide so that the page generates a horizontal scrollbar and then scroll the page, the page content can paint underneath the menu.
The menu already has a z-index to make it render above the content, but doesn't actually have a background. Give it a background.
The "transparent" rule was added in D16346 but I don't see any reason why we actually need it there, so I think this probably won't break anything.
Test Plan: {F5518822}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120
Differential Revision: https://secure.phabricator.com/D19344
Summary:
Depends on D19322. Ref T13120. Ref T12414.
Currently, `AlmanacDevice` has a bit of a beast of a `TYPE_INTERFACE` transaction that fully creates a complex Interface object. This isn't very flexible or consistent, and Interfaces are complex enough to reasonably have their own object behaviors (for example, they have their own PHIDs).
The complexity of this transaction makes modularizing `AlmanacDevice` transactions tricky. To simplify this, move Interface toward having its own set of normal transactions.
This change just adds some reasonable-looking transactions; it doesn't actually hook them up in the UI or make them reachable. I'll test that they actually work as I swap the UI over.
We may also have some code using the `TYPE_INTERFACE` transaction in Phacility support stuff, so that may need to wait a week to actually phase out.
Test Plan: Ran `bin/storage upgrade` and `arc liberate`. This code isn't reachable yet.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19323
Summary: Ref T13118. The first fix there fixed Safari, but made Chrome weird. Try this?
Test Plan: Viewed a code block with `name=...` in Safari, Firefox and Chrome and saw consistent display without weird wrappping.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13118
Differential Revision: https://secure.phabricator.com/D19319
Summary:
Depends on D19313. Ref T13105. Fixes T13015. We lost the coloration for ages in the switch to Document Engine.
Restore it, and use a wider range of colors to make the information more clear.
Test Plan: Viewed some blame, saw a nice explosion of bright colors. This is a cornerstone of good design.
Maniphest Tasks: T13105, T13015
Differential Revision: https://secure.phabricator.com/D19314
Summary:
Depends on D19312. Ref T13105. For readability, render only one link for each contiguous block of changes.
Also make the actual rendering logic a little more defensible.
Test Plan: Viewed some files with blame, saw one render per chunk instead of one per line.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19313
Summary: Depends on D19311. Ref T13105. Currently, blame only renders on the initial request. Instead, redraw blame after swapping views.
Test Plan: Swapped from "Source -> Hexdump -> Source" and "Hexdump -> Source". Saw blame on source in all cases.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19312
Summary: Ref T13105. The line linker behavior currently has trouble identifying the line number when blame is active. Improve this, albeit not the most cleanly.
Test Plan: Selected lines with blame on.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19310
Summary: Ref T13105. This needs refinement but blame sort of works again, now.
Test Plan: Viewed files in Diffusion and Files; saw blame in Diffusion when viewing in source mode.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19309
Summary: Ref T13105. Ref T13047. This makes symbol indexes work with DocumentEngine in Files, and restores support in Diffusion.
Test Plan: Command-clicked stuff, got taken to the symbol index with reasonable metadata in Diffusion, Differential and Files.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105, T13047
Differential Revision: https://secure.phabricator.com/D19307
Summary:
Ref T13105. Fixes some issues with line linking and highlighting under DocumentEngine:
- Adding `$1-3` to the URI didn't work correctly with query parameters.
- Reading `$1-3` from the URI didn't work correctly because Diffusion parses them slightly abnormally.
Test Plan: Clicked/dragged lines to select them. Observed URI. Reloaded page, got the right selection.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19305
Summary: Fixes T13118. Ref T13120. This construction is a little odd; I'm not entirely sure why Safari is doing what it's doing, but this appears to fix it.
Test Plan: Viewed blocks like those in T13118 in Safari. Before the patch, weird last-letter wrapping. After the patch, sensible behavior.
Maniphest Tasks: T13118, T13120
Differential Revision: https://secure.phabricator.com/D19303
Summary: Ref T13110. See PHI230. Show revision sizes on a roughly logarithmic scale from 1-7 stars. See D16322 for theorycrafting on this element.
Test Plan: Looked at some revisions, saw plausible-looking size markers.
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19294
Summary:
Depends on D19284. Ref T13110. It's now possible to get a revision into a "Abandoned + But, Never Promoted From Draft" state. Show this in the header and provide the draft hint above the comment area.
Also, remove `shouldBroadcast()`. The method `getShouldBroadcast()` now has the same meaning.
Finally, migrate existing drafts to `shouldBroadcast = false` and default `shouldBroadcast` to `true`. If we don't do this, every older revision becomes a non-broadcasting revision because this flag was not explicitly set on revision creation before, only on promotion out of draft.
Test Plan: Ran migration; abandoned draft revisions and ended up in a draft + abandoned state.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19285
Summary: Depends on D19273. Ref T13105. Adds "Change Text Encoding..." and "Highlight As..." options when rendering documents, and makes an effort to automatically detect and handle text encoding.
Test Plan:
- Uploaded a Shift-JIS file, saw it auto-detect as Shift-JIS.
- Converted files between encodings.
- Highlighted various things as "Rainbow", etc.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19274
Summary:
Ref T13114. See PHI522. Although it looks like results are already ordered correctly, the override rendering isn't accommodating disabled results gracefully.
Give closed results a distinctive look (grey + strikethru) so it's clear when you're autocompleting `@mention...` into a disabled user.
Test Plan: {F5497621}
Maniphest Tasks: T13114
Differential Revision: https://secure.phabricator.com/D19272
Summary:
Depends on D19258. Ref T13105.
- When the default renderer is an Ajax renderer, don't replace the URI. For example, when viewing a Jupyter notebook, the URI should remain `/F123`, not instantly change to `/view/123/jupyter/`.
- Fix an issue where non-ajax renderers could fail to display the dropdown menu properly.
Test Plan:
- Viewed a Jupyter notebook, stayed on the same URI.
- Changed rendering, got different URIs.
- Viewed a JSON file and toggled renderers via dropdown.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19259
Summary:
Ref T13105. This adds various small client-side improvements to document rendering.
- In the menu, show which renderer is in use.
- Make linking to lines work.
- Make URIs persist information about which rendering engine is in use.
- Improve the UI feedback for transitions between document types.
- Load slower documents asynchronously by default.
- Discard irrelevant requests if you spam the view menu.
Test Plan: Loaded files, linked to lines, swapped between modes, copy/pasted URLs.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19256
Summary: Ref T13105. Allow normal text files to be rendered as documents, and add a "source code" rendering engine.
Test Plan: Viewed some source code.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19254
Summary:
Depends on D19252. Ref T13105. This very roughly renders Jupyter notebooks.
It's probably better than showing the raw JSON, but not by much.
Test Plan:
- Viewed various notebooks with various cell types, including markdown, code, stdout, stderr, images, HTML, and Javascript.
- HTML and Javascript are not live-fired since they're wildly dangerous.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19253
Summary:
Depends on D19251. Ref T13105. This adds rendering engine support for PDFs.
It doesn't actually render them, it just renders a link which you can click to view them in a new window. This is much easier than actually rendering them inline and at least 95% as good most of the time (and probably more-than-100%-as-good some of the time).
This makes PDF a viewable MIME type by default and adds a narrow CSP exception for it. See also T13112.
Test Plan:
- Viewed PDFs in Files, got a link to view them in a new tab.
- Clicked the link in Safari, Chrome, and Firefox; got inline PDFs.
- Verified primary CSP is still `object-src 'none'` with `curl ...`.
- Interacted with the vanilla lightbox element to check that it still works.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19252
Summary:
Ref T13105. Although Markdown is trickier to deal with, we can handle Remarkup easily.
This may need some support for encoding options.
Test Plan: Viewed `.remarkup` files, got remarkup document presentation by default. Viewed other text files, got an option to render as remarkup.
Reviewers: avivey
Reviewed By: avivey
Subscribers: mydeveloperday, avivey
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19251
Summary:
Depends on D19249. Ref T13109. Add timing information to the `PushEvent`:
- `writeWait`: Time spent waiting for a write lock.
- `readWait`: Time spent waiting for a read lock.
- `hostWait`: Roughly, total time spent on the leaf node.
The primary goal here is to see if `readWait` is meaningful in the wild. If it is, that motivates smarter routing, and the value of smarter routing can be demonstrated by looking for a reduction in read wait times.
Test Plan: Pushed some stuff, saw reasonable timing values in the table. Saw timing information in "Export Data".
Maniphest Tasks: T13109
Differential Revision: https://secure.phabricator.com/D19250
Summary:
Depends on D19247. Ref T13109. When we receive an SSH request, generate a random unique ID for the request. Then thread it down through the process tree.
The immediate goal is to let the `ssh-exec` process coordinate with `commit-hook` process and log information about read and write lock wait times. Today, there's no way for `ssh-exec` to interact with the `PushEvent`, but this is the most helpful place to store this data for users.
Test Plan: Made pushes, saw the `PushEvent` table populate with a random request ID. Exported data and saw the ID preserved in the export.
Maniphest Tasks: T13109
Differential Revision: https://secure.phabricator.com/D19249
Summary:
Depends on D19245. Fixes T11145. Ref T13108. See PHI488. Disable workflow buttons when they're clicked to prevent accidental client-side double submission.
This might have some weird side effects but we should normally never need to re-use a workflow dialog form so it's not immediately obvious that this can break anything.
Test Plan:
- Added `sleep(1)` to the Mute controller and the Maniphest task controller.
- Added `phlog(...)` to the Mute controller.
- Opened the mute dialog, mashed the button a thousand times.
- Before: Saw a bunch of logs.
- After: Button immediately disables, saw only one log.
Maniphest Tasks: T13108, T11145
Differential Revision: https://secure.phabricator.com/D19246
Summary:
See PHI488. Ref T13108. Currently, there is a narrow window between when the response returns and when the browser actually follows the redirect where the form is live and you can click the button again.
This is relativey easy if Phabricator is running //too fast// since the button may be disabled only momentarily. This seems to be easier in Firefox/Chrome than Safari.
Test Plan:
- In Firefox and Chrome, spam-clicked a comment submit button.
- Before: could sometimes get a double-submit.
- After: couldn't get a double-submit.
- This could probably be reproduced more reliabily by adding a `sleep(1)` to whatever we're redirecting //to//.
- Submitted an empty comment, got a dialog plus a still-enabled form (so this doesn't break the non-redirect case).
Maniphest Tasks: T13108
Differential Revision: https://secure.phabricator.com/D19245
Summary:
Depends on D19238. Ref T13105. Give document engines some reasonable automatic support for degrading gracefully when someone tries to hexdump a 100MB file or similar.
Also, make "Video" sort above "Audio" for files which could be rendered either way.
Test Plan: Viewed audio, video, image, and other files. Adjusted limits and saw full, partial, and fallback/error rendering.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19239
Summary: Depends on D19237. Ref T13105. This adds a (very basic) "Hexdump" engine (mostly just to have a second option to switch to) and a selector for choosing view modes.
Test Plan: Viewed some files, switched between audio/video/image/hexdump.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19238
Summary:
Ref T13105. This change begins modularizing document rendering. I'm starting in Files since it's the use case with the smallest amount of complexity.
Currently, we hard-coding the inline rendering for images, audio, and video. Instead, use the modular engine pattern to make rendering flexible and extensible.
There aren't any options for switching modes yet and none of the renderers do anything fancy. This API is also probably very unstable.
Test Plan: Viewwed images, audio, video, and other files. Saw reasonable renderings, with "nothing can render this" for any other file type.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19237
Summary:
See <https://discourse.phabricator-community.org/t/desktop-only-notifications-mode-is-broken/1234>. Ref T13102. The "Desktop Only" mode for notifications currently shows both desktop and web notifications.
In fact, `JX.Notification` currently has no ability to render notifications as desktop-only. Make this work.
Note that many of the variables and parameters here, including `showAnyNotification`, `web_ready`, and `desktop_ready`, are named in an incorrect or misleading way. However, the new behavior appears to be correct.
Test Plan:
- Emitted test notifications in "No Notifications", "Web Only", "Web and Desktop", and "Desktop" modes.
- Saw appropriate notifications appear in the UI.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19233
Summary: Ref T13106. When profiling service queries, there's no convenient way to easily get a sense of why a query was issued. Add a mode to collect traces for each query to make this more clear. This is rough, but works well enough to be useful.
Test Plan: Clicked "Analyze Query Plans", got stack traces for each service call.
Maniphest Tasks: T13106
Differential Revision: https://secure.phabricator.com/D19221
Summary:
See PHI451. Ref T13102. DarkConsole uses an ancient inline "onclick" handler to expand the stack traces for errors.
The new Content-Security-Policy prevents this from functioning.
Replace this with a more modern behavior-driven action instead.
Test Plan:
- Clicked some errors in DarkConsole, saw stack traces appear.
- Grepped for `onclick` and `jsprintf()` to see if I could find any more of these, but came up empty.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19218
Summary:
Fixes T12994. We need `MYSQLI_ASYNC` to implement client-side query timeouts, and we need MySQLi + MySQL Native Driver to get `MYSQLI_ASYNC`.
Recommend users install MySQLi and MySQL Native Driver if they don't have them. These are generally the defaults and best practice anyway, but Ubuntu makes it easy to use the older stuff.
All the cases we're currently aware of stem from `apt-get install php5-mysql` (which explicitly selects the non-native driver) so issue particular guidance about `php5-mysqlnd`.
Test Plan:
- Faked both issues locally, reviewed the text.
- Will deploy to `secure`, which currently has the non-native driver.
Maniphest Tasks: T12994
Differential Revision: https://secure.phabricator.com/D19216
Summary:
Ref T13102. An install has a custom rule for bridging JIRA references via Doorkeeper and would like to be able to render them as `JIRA-123` instead of `JIRA JIRA-123 Full JIRA title`.
I think it's reasonable to imagine future support upstream for `JIRA-123`, `{JIRA-123}`, and so on, although we do not support these today. We can take a small step toward eventual support by letting the rendering pipeline understand different view modes.
This adds an optional `name` (the default text rendered before we do the OAuth sync) and an optional `view`, which can be `short` or `full`.
Test Plan:
I tested this primarily with Asana, since it's less of a pain to set up than JIRA. The logic should be similar, hopefully.
I changed `DoorkeeperAsanaRemarkupRule` to specify `name` and `view`, e.g `'view' => (mt_rand(0, 1) ? 'short' : 'full')`. Then I made a bunch of Asana references in a comment and saw them randomly go short or long.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19215
Summary:
See PHI431. Ref T13102. An install is interested in a custom "non-sticky" accept action, roughly.
On the one hand, this is a pretty hacky patch. However, I suspect it inches us closer to T731, and I'm generally comfortable with exploring the realms of "Accept Next Update", "Unblock Without Accepting", etc., as long as most of it doesn't end up enabled by default in the upstream.
Test Plan:
- Accepted and updated revisions normally, saw accepts respect global stickiness.
- Modified the "Accept" action to explicitly be unsticky, saw nonsticky accept behavior after update.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19211
Summary: Ref T13103. Make favicons customizable, and perform dynamic compositing to add marker to indicate things like "unread messages".
Test Plan: Viewed favicons in Safari, Firefox and Chrome. With unread messages, saw pink dot composited into icon.
Maniphest Tasks: T13103
Differential Revision: https://secure.phabricator.com/D19209
Summary:
See PHI439. This fills in additional information about Owners packages.
Also removes dead `primaryOwnerPHID`.
Test Plan: Called `owners.search` and reviewed the results. Grepped for `primaryOwnerPHID`.
Differential Revision: https://secure.phabricator.com/D19207
Summary:
See <https://discourse.phabricator-community.org/t/lightbox-not-working/1201/3>. The lightbox code is fragile and currently relies on simulating a click on the actual "<a />" tag surrounding other images in the document.
This breaks the prev/next links which ignore the event because it there's no "<img />".
Instead, don't simulate clicks and just call the code we want directly.
Test Plan: Added several images to a page, used lightbox prev/next buttons to cycle between them.
Differential Revision: https://secure.phabricator.com/D19197
Summary:
Depends on D19192. Ref T4190. Ref T13101. Instead of directly including the proxy endpoint with `<img src="..." />`, emit a placeholder and use AJAX to make the request. If the proxy fetch fails, replace the placeholder with an error message.
This isn't the most polished implementation imaginable, but it's much less mysterious about errors.
Test Plan: Used `{image ...}` for valid and invalid images, got images and useful error messages respectively.
Maniphest Tasks: T13101, T4190
Differential Revision: https://secure.phabricator.com/D19193
Summary: Depends on D19190. Fixes T12590. Ref T13099. Replaces the barely-usable, gigantic, poorly ordered "<select />" control with a tokenizer. Attempts to fix various minor issues.
Test Plan:
- Edited paths: include/exclude paths, from different repositories, different actual paths.
- Used "Add New Path" to add rows, got repository selector prepopulated with last value.
- Used "remove".
- Used validation typeahead, got reasonable behaviors?
The error behavior if you delete the repository for a path is a little sketchy still, but roughly okay.
Maniphest Tasks: T13099, T12590
Differential Revision: https://secure.phabricator.com/D19191
Summary: Ref T12590. This is ancient code which was used to prefill `/trunk/tfb/www/` or similar at Facebook. I don't think it ever had a UI and no install has asked for this feature since 2011.
Test Plan: Grepped for affected symbols, edited paths in Owners.
Maniphest Tasks: T12590
Differential Revision: https://secure.phabricator.com/D19189
Summary:
Depends on D19183. Ref T11015. Currently, adding a trailing slash works great and omitting it mysteriously doesn't work.
Store a normalized version with an unconditional trailing slash for the lookup logic to operate on, and a separate display version which tracks what the user actually typed.
Test Plan:
- Entered "/src/main.c", "/src/main.c/", saw them de-duplicate.
- Entered "/src/main.c", saw it stay that way in the UI but appear as "/src/main.c/" internally.
- Added a rule for "/src/applications/owners" (no slash), created a revision touching paths in that directory, saw Owners fire for it.
- Changed the display value of a path only ("/src/main.c" to "/src/main.c/"), saw the update reflected in the UI without any beahvioral change.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19184
Summary:
Depends on D19182. Ref T11015. This changes `path` from `text255` to `longtext` because paths may be arbitrarily long.
It adds `pathDisplay` to prepare for display paths and storage paths having different values. For now, `pathDisplay` is copied from `path` and always has the same value.
Test Plan:
- Ran migration, checked database for sanity (all `pathDisplay` and `path` values identical).
- Added new paths, saw `pathDisplay` and `path` get the same values.
- Added an unreasonably enormous path with far more than 255 characters.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19183
Summary:
Depends on D19181. Ref T11015. This nukes duplicates from the table if they exist, then adds a unique key.
(Duplicates should not exist and can not be added with any recent version of the web UI.)
Test Plan:
- Tried to add duplicates with web UI, didn't have any luck.
- Explicitly added duplicates with manual `INSERT`s.
- Viewed packages in web UI and saw duplicates.
- Ran migrations, got a clean purge and a nice unique key.
- There's still no way to actually hit a duplicate key error in the UI (unless you can collide hashes, I suppose), this is purely a correctness/robustness change.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19182
Summary: Ref T11015. This supports making path names arbitrarily long and putting a proper unique key on the table.
Test Plan:
- Migrated, checked database, saw nice digested indexes.
- Edited a package, saw new rows update with digested indexes.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19181
Summary:
Ref T13099. See that task for discussion. Chrome is unhappy with an MFA form submitting to an endpoint which redirects you to an OAuth URI.
Instead, do the redirect entirely on the client.
Chrome's rationale here isn't obvious, so we may be able to revert this at some point.
Test Plan: Went through the OAuth flow locally, was redirected on the client. Will verify in production.
Maniphest Tasks: T13099
Differential Revision: https://secure.phabricator.com/D19177
Summary: Ref T13099. Move most of the "Update" logic to modular transactions
Test Plan: Created and updated revisions. Flushed the task queue. Grepped for `TYPE_UPDATE`. Reviewed update transactions in the timeline and feed.
Maniphest Tasks: T13099
Differential Revision: https://secure.phabricator.com/D19175
Summary: Depends on D19173. Ref T13096. Adds an optional, disabled-by-default lock log to make it easier to figure out what is acquiring and holding locks.
Test Plan: Ran `bin/lock log --enable`, `--disable`, `--name`, etc. Saw sensible-looking output with log enabled and daemons restarted. Saw no additional output with log disabled and daemons restarted.
Maniphest Tasks: T13096
Differential Revision: https://secure.phabricator.com/D19174
Summary:
Depends on D19166. Ref T13088. When the user scrolls away from a followed log, break the focus lock.
Let users stop following a live log.
Show when lines are added more clearly.
Don't refresh quite as quickly give users a better shot at clicking the stop button.
These behaviors can probably be refined but are at least more plausible and less actively user-hostile than the first version of this behavior was.
Test Plan: Used `write-log --rate` to write a large log slowly. Clicked "Follow Log", followed for a bit. Scrolled away, still got live updates but no more scroll lock. Clicked stop, no more updates.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19167
Summary:
Depends on D19165. Ref T13088. Currently, in other applications, we use Zero Width Spaces and Javascript "copy" listeners to prevent line numbers from being copied. This isn't terribly elegant.
Modern browsers support a second approach: using psuedo-elements with `content`. Try this in Harbormaster since it's conceptually cleaner, at least. One immediate drawback is that Command-F can't find this text either.
Test Plan: In Safari, Chrome and Firefox, highlighted ranges of lines and copy/pasted text. Got just text (no line numbers) in all cases.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19166
Summary: Depends on D19164. Ref T13088. Now that the JS behaviors are generic, use them on the Harbormaster standalone page.
Test Plan: Clicked lines and dragged across line ranges. Reloaded pages. Saw expected highlighting behavior in the client and on the server across reloads.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19165
Summary: Depends on D19163. Ref T13088. Increase the generality of this code so it can be shared with Harbormaster.
Test Plan: Clicked individual lines, clicked-and-dragged, etc., in Paste. Got sensible URI and highlight behaviors.
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19164
Summary:
Depends on D19162. Ref T13088. When a user links to `$1234`, we need to render a default view of the log with a piece at the head, a piece at the end, and a piece in the middle.
We also need to figure out the offset for line 1234, or multiple offsets for "1234-2345".
Since the logic views/reads mostly anticipated this it isn't too much of a mess, although there are a couple of bugs this exposes with view specifications that use combinations of parameters which were previously impossible.
Test Plan: Viewed a large log with no line marker. Viewed `$1`. Viewed `$end`. Viewed `$35-40`, etc. Expanded context around logs.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19163
Summary: Depends on D19156. Ref T13094. This replaces the remaining forms in the file embed view and lightbox with normal download links.
Test Plan: Clicked "Download" and lightbox -> download for embedded files.
Maniphest Tasks: T13094
Differential Revision: https://secure.phabricator.com/D19157
Summary:
Depends on D19155. Ref T13094. Ref T4340.
We can't currently implement a strict `form-action 'self'` content security policy because some file downloads rely on a `<form />` which sometimes POSTs to the CDN domain.
Broadly, stop generating these forms. We just redirect instead, and show an interstitial confirm dialog if no CDN domain is configured. This makes the UX for installs with no CDN domain a little worse and the UX for everyone else better.
Then, implement the stricter Content-Security-Policy.
This also removes extra confirm dialogs for downloading Harbormaster build logs and data exports.
Test Plan:
- Went through the plain data export, data export with bulk jobs, ssh key generation, calendar ICS download, Diffusion data, Paste data, Harbormaster log data, and normal file data download workflows with a CDN domain.
- Went through all those workflows again without a CDN domain.
- Grepped for affected symbols (`getCDNURI()`, `getDownloadURI()`).
- Added an evil form to a page, tried to submit it, was rejected.
- Went through the ReCaptcha and Stripe flows again to see if they're submitting any forms.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13094, T4340
Differential Revision: https://secure.phabricator.com/D19156
Summary: Depends on D19152. Ref T13088. This adds live log tailing. It is probably not the final version of this feature because it prevents escape once you begin tailing a log.
Test Plan: Used `bin/harbormaster write-log --rate ...` to write a log slowly. Viewed it in the web UI. Clicked "Follow Log". Followed the log until the write finished, a lifetime later.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19153
Summary: Depends on D19148. Ref T13088. The new rendering always executes range requests for data it needs, and we can satisfy these requests by loading the smallest number of chunks which span that range.
Test Plan: Piped 50,000 lines of Apache log into Harbormaster, viewed it in the new UI, got sensible rendering times and a reasonable amount of data actually going over the wire.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19149
Summary:
See PHI399. Ref T4340. This header provides an additional layer of protection against various attacks, including XSS attacks which embed inline `<script ...>` or `onhover="..."` content into the document.
**style-src**: The "unsafe-inline" directive affects both `style="..."` and `<style>`. We use a lot of `style="..."`, some very legitimately, so we can't realistically get away from this any time soon. We only use one `<style>` (for monospaced font preferences) but can't disable `<style>` without disabling `style="..."`.
**img-src**: We use "data:" URIs to inline small images into CSS, and there's a significant performance benefit from doing this. There doesn't seem to be a way to allow "data" URIs in CSS without allowing them in the document itself.
**script-src** and **frame-src**: For a small number of flows (Recaptcha, Stripe) we embed external javascript, some of which embeds child elements (or additional resources) into the document. We now whitelist these narrowly on the respective pages.
This won't work with Quicksand, so I've blacklisted it for now.
**connect-src**: We need to include `'self'` for AJAX to work, and any websocket URIs.
**Clickjacking**: We now have three layers of protection:
- X-Frame-Options: works in older browsers.
- `frame-ancestors 'none'`: does the same thing.
- Explicit framebust in JX.Stratcom after initialization: works in ancient IE.
We could probably drop the explicit framebust but it wasn't difficult to retain.
**script tags**: We previously used an inline `<script>` tag to start Javelin. I've moved this to `<data data-javelin-init ...>` tags, which seems to work properly.
**`__DEV__`**: We previously used an inline `<script>` tag to set the `__DEV__` mode flag. I tried using the "initialization" tags for this, but they fire too late. I moved it to `<html data-developer-mode="1">`, which seems OK everywhere.
**CSP Scope**: Only the CSP header on the original request appears to matter -- you can't refine the scope by emitting headers on CSS/JS. To reduce confusion, I disabled the headers on those response types. More headers could be disabled, although we're likely already deep in the land of diminishing returns.
**Initialization**: The initialization sequence has changed slightly. Previously, we waited for the <script> in bottom of the document to evaluate. Now, we go fishing for tags when domcontentready fires.
Test Plan:
- Browsed around in Firefox, Safari and Chrome looking for console warnings. Interacted with various Javascript behaviors. Enabled Quicksand.
- Disabled all the framebusting, launched a clickjacking attack, verified that each layer of protection is individually effective.
- Verified that the XHProf iframe in Darkconsole and the PHPAST frame layout work properly.
- Enabled notifications, verified no complaints about connecting to Aphlict.
- Hit `__DEV__` mode warnings based on the new data attribute.
- Tried to do sketchy stuff with `data:` URIs and SVGs. This works but doesn't seem to be able to do anything dangerous.
- Went through the Stripe and Recaptcha workflows.
- Dumped and examined the CSP headers with `curl`, etc.
- Added a raw <script> tag to a page (as though I'd found an XSS attack), verified it was no longer executed.
Maniphest Tasks: T4340
Differential Revision: https://secure.phabricator.com/D19143
Summary:
Depends on D19141. Ref T13088. Some of the fundamental log behaviors like "loading the correct rows" are now a bit better behaved.
The UI is a little less garbage, too.
Test Plan: Viewed some logs and loaded more context by clicking the buttons.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19142
Summary: Depends on D19139. Ref T13088. This doesn't actually work, but is close enough that a skilled attacker might be able to briefly deceive a small child.
Test Plan:
- Viewed some very small logs under very controlled conditions, saw content.
- Larger logs vaguely do something resembling working correctly.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19141
Summary:
Depends on D19138. Ref T13088. When we want to read the last part of a logfile //and show accurate line numbers//, we need to be able to get from byte offsets to line numbers somehow.
Our fundamental unit must remain byte offsets, because a test can emit an arbitrarily long line, and we should accommodate it cleanly if a test emits 2GB of the letter "A".
To support going from byte offsets to line numbers, compute a map with periodic line markers throughout the offsets of the file. From here, we can figure out the line numbers for arbitrary positions in the file with only a constant amount of work.
Test Plan: Added unit tests; ran unit tests.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19139
Summary: Depends on D19137. Ref T13088. This allows `rebuild-log` to skip work if the chunks are already compressed. It also prepares for a future GC which is looking for "text" or "gzip" chunks to throw away in favor of archival into Files; such a GC can use this column to find collectable logs and then write "file" to it, meaning "chunks are gone, this data is only available in Files".
Test Plan: Ran migration, saw logs populate as "text". Ran `rebuild-log`, saw logs rebuild as "gzip".
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19138
Summary: Depends on D19135. Ref T13088. Denormalize the total log size onto the log itself. This makes reasoning about the log at display time easier, and we don't need to fish around in the database as much to figure out what we're dealing with.
Test Plan: Ran `bin/harbormaster rebuild-log`, saw an existing log populate. Ran `bin/harbormaster write-log`, saw new log write with proper length information.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19136
Summary: Depends on D19131. Ref T13088. During log finalization, stream the log into Files to support "Download Log", archive to Files, and API access.
Test Plan: Ran `write-log` and `rebuild-log`, saw Files objects generate with log content and appropriate permissions.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19132
Summary:
Ref T13090. The default width changed recently to become much wider, but the behavior on this control isn't great. Instead:
- Pick a default width somewhere between the two.
- Make the width sticky across show/hide (pressing "f" twice remembers your width instead of resetting it).
- Make the width sticky across reloads (dragging the bar, then reloading the page keeps the bar in the same place).
Test Plan:
- Without settings, loaded page: got medium-width bar.
- Dragged bar wide/narrow, toggled on/off with "f", got persistent width.
- Dragged bar wide/narrow, reloaded page, got persistent width.
- Dragged bar wide/narrow, toggled it off, reloaded page, toggled it on, got persistent width.
Maniphest Tasks: T13090
Differential Revision: https://secure.phabricator.com/D19129
Summary:
Ref T13083. Facts has a fair amount of weird hardcoding and duplication of responsibilities. Reduce this somewhat: no more hard-coded fact aggregates, no more database-driven list of available facts, etc. Generally, derive all objective truth from FactEngines. This is more similar to how most other modern applications work.
For clarity, hopefully: rename "FactSpec" to "Fact". Rename "RawFact" to "Datapoint".
Split the fairly optimistic "RawFact" table into an "IntDatapoint" table with less stuff in it, then dimension tables for the object PHIDs and key names. This is primarily aimed at reducing the row size of each datapoint. At the time I originally wrote this code we hadn't experimented much with storing similar data in multiple tables, but this is now more common and has worked well elsewhere (CustomFields, Edges, Ferret) so I don't anticipate this causing issues. If we need more complex or multidimension/multivalue tables later we can accommodate them. The queries a single table supports (like "all facts of all kinds in some time window") don't make any sense as far as I can tell and could likely be UNION ALL'd anyway.
Remove all the aggregation stuff for now, it's not really clear to me what this should look like.
Test Plan: Ran `bin/fact analyze` and viewed web UI. Nothing exploded too violently.
Subscribers: yelirekim
Maniphest Tasks: T13083
Differential Revision: https://secure.phabricator.com/D19119
Summary:
Ref T13077. The autosuggester is a little too eager right now, and will eat carriage returns after typing `[` if you never activate the tokenizer.
To fix this, try just canceling sooner. If that doesn't work, we might need to cancel more eagerly by testing to see if the tokenizer is actually open.
Test Plan: Typed `[x]<return>`, got my return instead of getting trapped by the autosuggester.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19110
Summary: Depends on D19107. Ref T13077. The underlying datasource may need some adjustment but this appears to work properly locally.
Test Plan: Typed `[[ por` locally, was suggested "Porcupine Facts". Typed `[[ / ]]`, saw it render as a reference to the wiki root instead of the install root.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19108
Summary:
Depends on D19106. Fixes T5941. Ref T13077. Allows you to find Phriction documents as suggestions from global quick search.
Also supports `w` to jump to Phriction and `w query` to query Phriction.
The actual query logic for the datasource may need some tweaking after it collides with reality, but seems to produce fairly reasonable results in local testing against synthetic data.
Test Plan: Searched for "Porcupine Facts", "Travel Companions", and other useful local pages. Searched for `w`. Searched for `w zebra facts`.
Maniphest Tasks: T13077, T5941
Differential Revision: https://secure.phabricator.com/D19107
Summary:
Depends on D19099. Ref T13077. Updates Phriction documents to string constants to make API interactions cleaner and statuses more practical to extend.
This does not seem to require any transaction migrations because none of the Phriction transactions actually store status values: status is always a side effect of other edits.
Test Plan: Created, edited, deleted, moved documents. Saw appropriate UI cues. Browsed and filtered documents by status in the index.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19100
Summary:
Depends on D19095. Ref T6203. Ref T13077. This column is nullable in an inconsistent way. Make it non-nullable.
Also clean up one more content query on the history view.
Test Plan: Ran migration, then created and edited documents without providing a descriptino or hitting `NULL` exceptions.
Maniphest Tasks: T13077, T6203
Differential Revision: https://secure.phabricator.com/D19096
Summary: Ref T13077. Prepares for modern API access to document history using standard "v3" APIs.
Test Plan: Ran migration, verified PHIDs appeared in the database. Created/edited a document, got even more PHIDs in the database.
Maniphest Tasks: T13077
Differential Revision: https://secure.phabricator.com/D19092
Summary:
Ref T13072. See PHI361. The bug in T10746 where aborting builds didn't propagate properly to the buildable was fixed, but existing builds are still stuck "Building".
Since it doesn't look like anything will moot this before these changes promote to `stable`, just migrate these builds into "failed".
Test Plan: Ran migration, saw it affect only relevant builds and correctly fail them.
Maniphest Tasks: T13072
Differential Revision: https://secure.phabricator.com/D19091
Summary: Fixes T13080. The banner wasn't properly included in the sleep/wake logic.
Test Plan:
Mentioned `Dxxx` on a task. Enabled persistent chat to activate Quicksand. Reloaded page. Clicked `Dxxx`. Scrolled down until a changeset header appeared. Pressed back button.
- Before patch: ended up on task, with header still around.
- After patch: ended up on task, with header properly vanquished.
Pressed "forward", ended up back on the revision with the header again.
Maniphest Tasks: T13080
Differential Revision: https://secure.phabricator.com/D19086
Summary: Ref T13054. Companion storage change for D19062.
Test Plan: Applied migration and adjustments. Viewed messages in Harbormaster; created them with `harbormaster.sendmessage`; processed them with `bin/phd debug task`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19063
Summary: Depends on D19056. Fixes T8475. Ref T13054. Merges "ModernHunk" back into "Hunk".
Test Plan: Grepped for `modernhunk`. Reviewed revisions. Created a new revision. Used `bin/differential migrate-hunk` to migrate hunks between storage formats and back.
Maniphest Tasks: T13054, T8475
Differential Revision: https://secure.phabricator.com/D19057
Summary: Ref T13054. Ref T8475. This table has had no readers or writers for more than a year after it was migrated to the modern table.
Test Plan: Ran migration, verified that all the data was still around.
Maniphest Tasks: T13054, T8475
Differential Revision: https://secure.phabricator.com/D19056
Summary: These transaction constants are flipped, which can produce the wrong result in some cases.
Test Plan: `./bin/storage upgrade -f --apply phabricator:20180208.maniphest.02.populate.php`
Differential Revision: https://secure.phabricator.com/D19054
Summary: Ref T11330. Adds general support for webhooks. This is still rough and missing a lot of pieces -- and not yet useful for anything -- but can make HTTP requests.
Test Plan: Used `bin/webhook call ...` to complete requests to a test endpoint.
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19045
Summary: See PHI356. Adds inline comment and done counts to the filetree. Also makes the filetree wider by default.
Test Plan: Fiddled with filetrees in different browsers on different revisions. Added inlines, marked them done/undone.
Differential Revision: https://secure.phabricator.com/D19041
Summary: See PHI356. Makes it easier to pick out change types in the filetree view in Differential.
Test Plan: Created a diff with adds, copies, moves, deletions, and binary files. Viewed in Differential, had an easier time picking stuff out.
Differential Revision: https://secure.phabricator.com/D19040
Summary:
Ref T4434. Although some of the use cases for this data are better fits for Facts, this data is reasonable to track separately.
I have an approximate view of it already ("closed, ordered by date modified") that's useful to review things that were fixed recently. This lets us make that view more effective.
This just adds (and populates) the storage. Followups will add Conduit, Export, Search, and UI support.
This is slightly tricky because merges work oddly (see T13020).
Test Plan:
- Ran migration, checked database for sensible results.
- Created a task in open/closed status, got the right database values.
- Modified a task to close/open it, got the right values.
- Merged an open task, got updates.
Maniphest Tasks: T4434
Differential Revision: https://secure.phabricator.com/D19037
Summary: Ref T13053. See PHI126. Add an explicit "Mute" action to kill mail and notifications for a particular object.
Test Plan: Muted and umuted an object while interacting with it. Saw mail route appropriately.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19033
Summary:
Depends on D19012. Ref T13053. In D19012, I've changed "Thread-Topic" to always use PHIDs.
This change drops the selective on-object storage we have to track the original, human-readable title for objects.
Even if we end up backing out the "Thread-Topic" change, we'd be better off storing this in a table in the Mail app which just has `<objectPHID, first subject we used when sending mail for that object>`, since then we get the right behavior without needing every object to have this separate field.
Test Plan: Grepped for `original`, `originalName`, `originalTitle`, etc.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19013
Summary:
This is currently `🎉`, which I'd never have guessed.
(This isn't a super scalable approach, but this emoji is in particularly common use. See also T12644.)
Test Plan: Typed `:party`, `:confet`, etc.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18993
Summary: See PHI333. Some of the cleanup at the tail end of the bulk edit changes made "Assign To" stop working properly, since we don't strip the `array(...)` off the `array(PHID)` value we receive.
Test Plan:
- Used bulk editor to assign and unassign tasks (single value datasource).
- Used bulk editor to change projects (multi-value datasource).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18975
Summary:
See PHI325. When a transaction group in Differential (or Pholio) only has an inline comment, it renders with a "V" caret but no actual dropdown menu.
This caret renders in a "disabled" color, but the color is "kinda grey". The "active" color is "kinda grey with a dab of blue". Here's what they look like today:
{F5401581}
Just remove it.
Test Plan: Viewed one of these, no longer saw the inactive caret.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18963
When we change a nullable column to a non-nullable column, we can get a
data truncation error if any value was "NULL".
This is exceptionally unusual, but our two very oldest Herald rules have
a "NULL" policy on `secure`.
Summary:
Depends on D18939. Ref T13047. Symbol lookup can be activated from a diff (in Differential or Diffusion) or from the static view of a file at a particular commit.
In the latter case, we need to figure out the path a little differently. The character and line number approaches still work as written.
Test Plan:
- Command-clicked symbols in the Diffusion browse view with blame on and off; saw path, line and char populate properly.
- Command-clicked symbols in Differential diff view to check I didn't break anything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18940
Summary: Depends on D18937. Ref T13047. When available, provide character positions so external indexers can return more accurate results.
Test Plan: Clicked symbols in Safari, Firefox and Chrome, got sensible-looking character positions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18939
Summary:
Ref T13047. In some reasonable cases, knowing the path and line number where a symbol appears is useful in ranking or filtering the set of matching symbols.
Giving symbol sources more information can't hurt, and it's generally free for us to include this context since we just need to grab it out of the document and pass it along.
We can't always get this data (for example, if a user types `s idx` into global search, we have no clue) but this is similar to other types of context which are only available sometimes (like which repository a symbol appears in).
Test Plan: Command-clicked some symbols in 1-up (unified) and 2-up (side-by-side) diff views with symbol indexes configured. Got accurate path and line information in the URI I was redirected to.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18936
Summary:
Depends on D18926. Ref T6203. Ref T13048. Herald rule repetition policies are stored as integers but treated as strings in most contexts.
After D18926, the integer stuff is almost totally hidden inside `HeraldRule` and getting rid of it completely isn't too tricky.
Do so now.
Test Plan:
- Created "only the first time" and "every time" rules. Did a SELECT on their rows in the database.
- Ran migrations, got a clean bill of health from `storage adjust`.
- Did another SELECT on the rows, saw a faithful conversion to strings "every" and "first".
- Edited and reviewed rules, swapping them between "every" and "first".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048, T6203
Differential Revision: https://secure.phabricator.com/D18927
Summary:
Ref T13048. This migration is from January 2012 and probably only impacted Facebook.
It references `HeraldRepetitionPolicyConfig`, which I'd like to change significantly. I initially just replaced the constant with a literal `0`, but I don't think there's any actual value in retaining this migration nowadays.
The cost of removing this migration is: if you installed Phabricator before January 2012 and haven't upgraded since then, you'll have a few more rows in the `APPLIED` table than necessary. Herald will still work correctly.
Test Plan: Reading.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18924
Summary:
Depends on D18907. Ref T13043. Ref T12509. We have some weird old password digest behavior that isn't terribly concerning, but also isn't great.
Specifically, old passwords were digested in weird ways before being hashed. Notably, account passwords were digested with usernames, so your password stops working if your username is chagned. Not the end of the world, but silly.
Mark all existing hashes as "v1", and automatically upgrade then when they're used or changed. Some day, far in the future, we could stop supporting these legacy digests and delete the code and passwords and just issue upgrade advice ("Passwords which haven't been used in more than two years no longer work."). But at least get things on a path toward sane, modern behavior.
Test Plan: Ran migration. Spot-checked that everthing in the database got marked as "v1". Used an existing password to login successfully. Verified that it was upgraded to a `null` (modern) digest. Logged in with it again.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043, T12509
Differential Revision: https://secure.phabricator.com/D18908
Summary:
Ref T13043. After D18903, this data has migrated to shared infrastructure and has no remaining readers or writers.
Just delete it now, since the cost of a mistake here is very small (users need to "Forgot Password?" and pick a new password).
Test Plan: Grepped for `passwordHash`, `passwordSalt`, and variations.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18904
Summary:
Ref T13043. This moves user account passwords to the new shared infrastructure.
There's a lot of code changes here, but essentially all of it is the same as the VCS password logic in D18898.
Test Plan:
- Ran migration.
- Spot checked table for general sanity.
- Logged in with an existing password.
- Hit all error conditions on "change password", "set password", "register new account" flows.
- Verified that changing password logs out other sessions.
- Verified that revoked passwords of a different type can't be selected.
- Changed passwords a bunch.
- Verified that salt regenerates properly after password change.
- Tried to login with the wrong password, which didn't work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18903
Summary:
Ref T13043. In D18898 I moved VCS passwords to the new shared infrastructure.
Before account passwords can move, we need to make two changes:
- For legacy reasons, VCS passwords and Account passwords have different "digest" algorithms. Both are more complicated than they should be, but we can't easily fix it without breaking existing passwords. Add a `PasswordHashInterface` so that objects which can have passwords hashes can implement custom digest logic for each password type.
- Account passwords have a dedicated external salt (`PhabricatorUser->passwordSalt`). This is a generally reasonable thing to support (since not all hashers are self-salting) and we need to keep it around so existing passwords still work. Add salt support to `AuthPassword` and make it generate/regenerate when passwords are updated.
Then add a nice story about password digestion.
Test Plan: Ran migrations. Used an existing VCS password; changed VCS password. Tried to use a revoked password. Unit tests still pass. Grepped for callers to legacy `PhabricatorHash::digestPassword()`, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18900
Summary:
Ref T13043. After D18898, this has been migrated to new, more modern storage and no longer has any readers or writers.
One migration from long ago (early 2014) is affected. Since this is ancient and the cost of dropping this is small (see inline), I just dropped it.
I'll note this in the changelog.
Test Plan: Ran migrations, got a clean bill of health from `storage status`. Grepped for removed symbol.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18899
Summary:
Ref T13043. Migrate VCS passwords away from their dedicated table to new the new shared infrastructure.
Future changes will migrate account passwords and remove the old table.
Test Plan:
- Ran migrations.
- Cloned with the same password that was configured before the migrations (worked).
- Cloned with a different, invalid password (failed).
- Changed password.
- Cloned with old password (failed).
- Cloned with new password (worked).
- Deleted password in web UI.
- Cloned with old password (failed).
- Set password to the same password as it currently is set to (worked, no "unique" collision).
- Set password to account password. !!This (incorrectly) works for now until account passwords migrate, since the uniqueness check can't see them yet.!!
- Set password to a new unique password.
- Cloned (worked).
- Revoked the password with `bin/auth revoke`.
- Verified web UI shows "no password set".
- Verified that pull no longer works.
- Verified that I can no longer select the revoked password.
- Verified that accounts do not interact:
- Tried to set account B to account A's password (worked).
- Tried to set account B to a password revoked on account A (worked).
- Spot checked the `password` and `passwordtransaction` tables for saniity.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18898
Summary:
Ref T13043. Currently:
- Passwords are stored separately in the "VCS Passwords" and "User" tables and don't share as much code as they could.
- Because User objects are all over the place in the code, password hashes are all over the place too (i.e., often somewhere in process memory). This is a very low-severity, theoretical sort of issue, but it could make leaving a stray `var_dump()` in the code somewhere a lot more dangerous than it otherwise is. Even if we never do this, third-party developers might. So it "feels nice" to imagine separating this data into a different table that we rarely load.
- Passwords can not be //revoked//. They can be //deleted//, but users can set the same password again. If you believe or suspect that a password may have been compromised, you might reasonably prefer to revoke it and force the user to select a //different// password.
This change prepares to remedy these issues by adding a new, more modern dedicated password storage table which supports storing multiple password types (account vs VCS), gives passwords real PHIDs and transactions, supports DestructionEngine, supports revocation, and supports `bin/auth revoke`.
It doesn't actually make anything use this new table yet. Future changes will migrate VCS passwords and account passwords to this table.
(This also gives third party applications a reasonable place to store password hashes in a consistent way if they have some need for it.)
Test Plan: Added some basic unit tests to cover general behavior. This is just skeleton code for now and will get more thorough testing when applications move.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18894
Summary:
See PHI173. Currently, Herald has an "Assign to" action for tasks, and you can specify custom fields with datasource values (like users or projects) that have a limit (like 1 "Owner", or 12 "Jury Members").
Herald doesn't support these limits right now, so you can write `[ Assign to ][ X, Y, Z ]`. This just means "Assign to X", but make it more clear by actually enforcing the limit in the UI.
Test Plan:
- Created a "projects" custom field with limit 1.
- Tried to create actions that 'assign to' or 'set custom field to' more than one thing, got helpfully rebuffed by the UI.
- Created an "add subscribers" action with more than one value.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18887
Summary:
Fixes T13042. This hooks up the new "silent" mode from D18882 and makes it actually work.
The UI (where we tell you to go run some command and then reload the page) is pretty clumsy, but should solve some problems for now and can be cleaned up eventually. The actual mechanics (timeline aggregation, Herald interaction, etc.) are on firmer ground.
Test Plan:
- Made a normal bulk edit, got mail and feed stories.
- Made a silent bulk edit, no mail and no feed.
- Saw "Silent Edit" marker in timeline for silent edits:
{F5386245}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13042
Differential Revision: https://secure.phabricator.com/D18883
Summary: Ref T13025. We're getting kind of a lot of actions, so put them in nice groups so they're easier to work with.
Test Plan: {F5386038}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18880
Summary:
Depends on D18866. Ref T13025. Fixes T12415. This makes the old "Add Comment" action work, and adds support for a new "Set description to" action (possibly, I could imagine "append description" being useful some day, maybe).
The implementation is just a `<textarea />`, not a whole fancy remarkup box with `[Bold] [Italic] ...` buttons, preview, typeaheads, etc. It would be nice to enrich this eventually but doing the rendering in pure JS is currently very involved.
This requires a little bit of gymnastics to get the transaction populated properly, and adds some extra validation since we need some code there anyway.
Test Plan:
- Changed the description of a task via bulk editor.
- Added a comment to a task via bulk editor.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T12415
Differential Revision: https://secure.phabricator.com/D18867
Summary:
Depends on D18862. See PHI173. Ref T13025. Fixes T10005. This redefines bulk edits in terms of EditEngine fields, rather than hard-coding the whole thing.
Only text fields -- and, specifically, only the "Title" field -- are supported after this change. Followup changes will add more bulk edit parameter types and broader field support.
However, the title field now works without any Maniphest-specific code, outside of the small amount of binding code in the `ManiphestBulkEditor` subclass.
Test Plan: Used the bulk edit workflow to change the titles of tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10005
Differential Revision: https://secure.phabricator.com/D18863
Summary:
Depends on D18805. Ref T13025. Fixes T10268.
Instead of using a list of IDs for the bulk editor, power it with SearchEngine queries. This gives us the full power of SearchEngine and lets us use a query key instead of a list of 20,000 IDs to avoid issues with URL lengths.
Also, split it into a base `BulkEngine` and per-application subclasses. This moves us toward T10005 and universal support for bulk operations.
Also:
- Renames most of "batch" to "bulk": we're curently inconsitent about this, I like "bulk" better since I think it's more clear if you don't regularly interact with `.bat` files, and newer stuff mostly uses "bulk".
- When objects in the result set can't be edited because you don't have permission, show the status more clearly.
This probably breaks some stuff a bit since I refactored so heavily, but it seems mostly OK from poking around. I'll clean up anything I missed in followups to deal with remaining items on T13025.
Test Plan:
{F5302300}
- Bulk edited from Maniphest.
- Bulk edited from a workboard (no more giant `?ids=....` in the URL).
- Hit most of the error conditions, I think?
- Clicked the "Cancel" button.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10268
Differential Revision: https://secure.phabricator.com/D18806
Summary:
Ref T13025. See PHI50. Fixes T11286. Ref T10005. Begin modernizing the bulk editor.
For T10005 ("move the bulk editor to modern infrastructure"), rewrite the rendering of the editable set so that it is application-agnostic and can work with any kind of object.
For T11286 ("let users de-select items in the working set"), make the working set editable.
Test Plan:
{F5302158}
- Deselected some objects, applied an edit, saw the edit apply to only selected objects.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T11286, T10005
Differential Revision: https://secure.phabricator.com/D18805
Summary:
See PHI242. All use cases for this that I know of are pretty hacky, but they don't seem perilous, and it's easier than webhooks.
See P1895, T10183, and T9853 for me previously refusing to implement this since all those use cases were also pretty bad.
Test Plan:
- Wrote a rule to add comments, saw it add comments.
- Reviewed summary, re-edited rule, reviewed transcript to check that all the strings worked OK.
- Wrote a new rule for a non-commentable object (a blog) to make sure I wasn't offered the "Add a comment" action.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18823
Summary:
Ref T10233. See PHI231. When users ignore the `arc land` prompt about bad revision states, make it explicitly clear in the transaction log that they broke the rules.
You can currently figure this out by noticing that there's no "This revision is accepted and ready to land." message, but it's unrealistic to expect non-expert users to look for the //absence// of a message to indicate something, and this state change is often relevant.
Test Plan: {F5302351}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10233
Differential Revision: https://secure.phabricator.com/D18808
Summary:
Ref T13018. See that task and the Discourse thread for discussion.
This doesn't work as-is and we need to `og:description` everything to make it work. I don't want to sink any more time into this so just back all the changes out for now.
(The `<html>` change is unnecessary anyway.)
Test Plan: Strict revert.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13018
Differential Revision: https://secure.phabricator.com/D18782
Summary:
See PHI180. Currently, if you begin creating or editing an inline and then swap display modes (for example, with "View Unified"), your edit is lost.
Persisting the editor state is complicated and this is very rare, so just prevent the action and warn the user instead.
Also make the warning persist for a little longer since a few of the messages, including this one, take a couple seconds to read now.
Test Plan:
- Edited a comment, tried to swap display modes, got a warning.
- Swapped display modes normally with no comment being edited.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18774
Summary:
Ref T12539. See PHI190. Currently, each Diff has a `revisionID`, but Revisions do not point at the current active diff. To find the active diff for a given revision, we need to issue a separate query.
Furthermore, this query is inefficient for bulk loads: if we have a lot of revisions, we end up querying for all diff IDs for all those revisions first, then selecting the largest ones and querying again to get the actual diff objects. This strategy could likely be optimized but the query is a mess in any case.
In several cases, it's useful to have the active diff PHID without needing to do a second query -- sometimes for convenience, and sometimes for performance.
T12539 is an example of such a case: it would be nice to refine the bucketing logic (which only depends on active diff PHIDs), but it feels bad to make the page heavier to do it.
For now, this is unused. I'll start using it to fix the bucketing issue, and then we can expand it gradually to address other performance/convenience issues.
Test Plan:
- Ran migrations, inspected database, saw sensible values.
- Created a new revision, saw a sensible database value.
- Updated an existing revision, saw database update properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12539
Differential Revision: https://secure.phabricator.com/D18756
Summary:
See PHI185. When looking at a revision, you can Command-Click (Mac) symbols to jump to their definitions (provided the symbol index has been built).
Currently, the code works on any node inside the changeset list, so it activates when clicking links inside inline comments and opening them in a new window.
To avoid this, don't activate if we're inside an inline comment. This technically prevents you from doing a symbol lookup on a symbol inside a codeblock inside an inline, but that seems fine/reasonable.
Test Plan: Wrote `Dxxx` in an inline, command-clicked it. Before: got a symbol lookup. After: just a new tab with the revision.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18753
Summary: Give profile images a little more space, fix "/" spacing, add a tooltip.
Test Plan: {F5251205}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18749
Summary: Depends on D18746. See PHI174. Adds small author portraits next to each blame line (this is similar to GitHub).
Test Plan:
My local test data isn't that great since I don't have commits from a lot of accounts, but looks functional:
{F5251056}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18747
Summary:
Ref PHI174. This reverts most of these changes:
- 37843127e9 / D18481
- 94cad30ac3 / D18474
- 12ae08b6b1 / D18473
- 0a01334172 / D18462
- ac91ab1ef9 / D18452
These changes made the Diffusion blame view very similar to GitHub's blame view. See D18452 for a before/after of the bulk of these changes; the other revisions are bugfixes.
I think this was generally a step backward, and not motivated by solving a specific problem. I've found the new UI less usable than the old one, and at least one install (see PHI174) also has.
In particular, the revision/commit titles are very bulky and not terribly useful; the date column also isn't terribly useful; the "age" color actually IS pretty useful and was heavily de-emphasized.
I've kept one bugfix here (missing `'a'` tag type) and kept the upgraded icon for "Skip Past This Commit".
I'm going to follow this up with some additional changes:
- Show a small author profile icon, similar to GitHub, to address PHI174 more directly.
- Try a zebra-stripe on blocks of rows to make it more clear where changes affected by a particular commit begin and end.
- Try a hue shift, not just a brightness/saturation shift, to make the "age" color more distinct.
- Try computing colors as even steps, not based purely on age. Currently, if a file has one long-distant commit and several recent commits, all the recent ones show up as very bright green. I think this would probably be more useful if they were distributed more evenly across the available color bands.
Test Plan:
Viewed blame views in Diffusion, saw a more compact UI similar to the old UI.
{F5251019}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18746
Summary: See PHI177. Ref T12974. PonderQuestion was overlooked during the Ferret engine conversions.
Test Plan:
Ran migrations, searched for questions, got results:
{F5241185}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12974
Differential Revision: https://secure.phabricator.com/D18736
Summary:
Ref T13000. This adds support for tracking "common" ngrams, which occur in too many documents to be useful as part of the ngram index.
If an ngram is listed in the "common" table, it won't be written when indexing documents, or queried for when searching for them.
In this change, nothing actually writes to the "common" table. I'll start writing to the table in a followup change.
Specifically, I plan to do this:
- A new GC process updates the "common" table periodically, by writing ngrams which appear in more than X% of documents to it, for some value of X, if there are at least a minimum number of documents (maybe like 4,000).
- A new GC process deletes ngrams that have been added to the common table from the existing indexes.
Hopefully, this will pare down the ngrams index to something reasonable over time without requiring any manual tuning.
Test Plan:
- Ran some queries and indexes.
- Manually inserted ngrams `xxx` and `yyy` into the ngrams table, searched and indexed, saw them ignored as viable ngrams for search/index.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18672
Summary: Hide navbar, and make curtain behave like on a phone, when printing.
Test Plan: {F5197340}
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18583
Summary:
Ref T12987. I was focused on the RefCursor table and overlooked that we need some care on this key.
It's currently possible to run `bin/storage upgrade --no-adjust`, then start Phabricator, and end up with duplicate records in this table. If you try to run `bin/storage adjust` later, it will try to add the unique key but fail. This is unusual for normal installs (they usually do not use `--no-adjust`) but we do it in the cluster and I did this exact thing on `secure`.
Normally, to avoid this, when a new table with a unique key is introduced, we also add a migration to explicitly add that key.
This is mostly harmless in this case. Fix this mistake (force the table to contain only unique rows; add the key) and try using `LOCK TABLES` to make this atomic. If this doesn't cause problems we can use this in similar situations in the future.
The "alter table may unlock things" warning comes from here:
https://dev.mysql.com/doc/refman/5.7/en/lock-tables.html
It seems like it's fine to issue `UNLOCK TABLES` even if you don't have any locks, so I think this script should always do the right thing now, regardless of ALTER TABLE unlocking or not unlocking tables.
Test Plan: Ran `bin/storage upgrade -f`, saw table end up in the right state. I'll also check this on `secure`, where the starting state is a little messier.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12987
Differential Revision: https://secure.phabricator.com/D18623
Summary:
Ref T11823. This change isn't standalone, but prepares for the more involved code change by dropping obsolete columns from the RefCursor table and adding the unique key we need to prevent the ambiguous/duplicate refs issue.
This data was moved to the RefPosition table in D18612.
Test Plan: Ran storage upgrade. See next revision for more substantial testing of this change series.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18613
Summary:
Ref T11823. This populates the new RefPosition table based on the existing RefCursor table, and deletes now-duplicate rows in the RefCursor table so the next change can add a unique key.
This change is not standalone, and there need to be separate code updates. I have a rough version of that written, but this migration needs to happen first to test it.
I'll hold this whole series of changes until after the release cut and until the code is updated.
Test Plan: Ran migration, spot-checked database tables. Saw redundant rows remove and correct-looking rows populated into the new RefPosition table.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18612
Summary:
Ref T11823. Currently, we have a "RefCursor" table which stores rows like `<branch or tag name, commit it is pointing at>` with some more data.
Because Mercurial can have a single branch pointing at several different places, this table must allow multiple rows with the same branch or tag name.
Among other things, this means there isn't a single PHID which can be used to identify a branch name in a stable way. However, we have several UIs where we want to be able to do this.
Some specific examples where we run into trouble: in Mercurial, if there are 5 heads for "default", that means there are 5 phids. And currently, if someone deletes a branch, we lose the PHID for it. Instead, we'd rather retain it so the whole world doesn't break if you accidentally delete a branch and then fix it a little later.
(I'll likely hold this until the rest of the logic is fleshed out a little more in followup changes.)
Test Plan: Ran `bin/storage upgrade`, saw the table get created without warnings.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18602
Summary:
Fixes T12979. In D18457, we added a "No Notifications" setting to let users disable the blue and yellow pop-up notifications that alert you when an object has been updated, since some users found them distracting.
However, the change made "do nothing" the default, so all other `JX.Notification` callsites -- which never pass a preference -- were effectively turned off no matter what your setting was set to. This includes the "Read-Only" mode warning (grey), the "High Security" mode warning (purple), the "timezone" warning, and a few others.
Tweak things a little bit so the setting applies to ONLY blue and yellow ("object you're following was updated" / "this object was updated") notifications, not other types of popup notifications.
Test Plan:
- With notifications on in settings, got blue notifications and "Read-only".
- With notifications off in settings, got "Read-only" but no blue notifications.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12979
Differential Revision: https://secure.phabricator.com/D18600
Summary:
Ref T12819. This is shipping, so issue upgrade guidance to instruct installs to rebuild the index.
Also generate a new `quickstart.sql` since we haven't regenerated in a bit and there's been a large amount of table churn fairly recently.
Test Plan: Ran `bin/storage upgrade`, saw guidance notification in UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18594
Summary: Adds some side margin here.
Test Plan: error out a form field in a white box
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18571
Summary: Ref T12819. More ferret engine support.
Test Plan: Indexed and searched commits and repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18572
Summary: Ref T12819. Support for Pholio.
Test Plan: Indexed and searched mocks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18569
Summary: Ref T12819. Adds ferret engine support for Calendar events.
Test Plan: Indexed and queried calendar events.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18568
Summary: Ref T12819. Adds Ferret engine support.
Test Plan: Indexed and searched for documents.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18567
Summary: Ref T12819. Adds support for projects.
Test Plan: Indexed and searched for projects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18566
Summary: Ref T12819. Mostly straightforward, with a couple of minor query modernization things.
Test Plan: Indexed and searched for posts and blogs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18565
Summary: Ref T12819. Same deal as before, but smaller diffs after D18559.
Test Plan: Indexed and searched for packages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18564
Summary: Ref T12819. Adds Ferret support to Passphrase.
Test Plan: Indexed credentials, searched for credentials.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18556
Summary: Ref T12819. Adds Ferret engine support to initiatives.
Test Plan: Indexed and searched for initiatives.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18555
Summary:
Ref T12819. Adds support for indexing user accounts so they appear in global fulltext results.
Also, always rank users ahead of other results.
Test Plan: Indexed users. Searched for a user, got that user.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18552
Summary: This simplifies EditEngine pages in general by removing the dual header, and extending to allow setting of a custom PHUIHeaderView if needed (like settings).
Test Plan:
Review all settings pages, review task, project pages. This should all be fine, but is a big change maybe some layouts I'm not considering. Tested these all mobile, destkop as well.
{F5166181}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18527
Summary: Updates settings panel UI for new white box, cleans up other various UI nitpicks.
Test Plan: Click through each setting that had a local setting page. Edit Engine pages will follow up on another diff.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18526
Summary: Simplifies the Repository Management pages to the new fixed column layout. I've also moved "Status" into the Basics page, which feels better, and moved "Documentation" as a nav item to a button in the header. This removed "action list" and "curtain view" from the management panels and uses the new bits from Config/Phacility. Undecided if the icons should stay or go for the nav. Left them in for Diffusion. I want to update the EditEngine pages to display in this UI and not leave the portal, but I haven't dug into that this page. I'm a bit worried it will not easily be possible.
Test Plan:
Generate a svn, git, hg repository, test each of the new pages and each of the new buttons. Activate, deactivate, etc.
{F5164674}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18523
Summary: Ref T12819. Adds storage and indexing for the Ferret engine to Differential.
Test Plan: Ran `bin/search index D123 --force`, saw indexes appear in database. No UI/user impact yet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18540
Summary:
This is a full UI pass at a cleaner "Config" application. The main idea is to simplify the UI, center it, and have a different feel than other UI, a sort of "manage" UI theme for objects with loads of settings. Also adds a new minimalistic "WHITE_CONFIG" box type which may get re-used in Diffusion settings. This is a 90% pass, I'll have a few follow up diffs. Specifically:
- Build breadcrumbs as a flexible UI to go into headers.
- One click ObjectItemView option, for hover states.
- Sidenav doesn't always select (AphrontFilter issue)
- Mobile touchups, though it's pretty reasonable.
Test Plan:
Click through every page here, edit options, see new navigation UI. Test a few various setup issue layouts including fatals.
{F5163228}
{F5163229}
{F5163230}
{F5163231}
{F5163232}
{F5163233}
{F5163234}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D18519
Summary: Custom icons here aren't being set. Also use more standard `tt` UI.
Test Plan: Set an icon, see set Icon.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18522
Summary: I can't seem to blame any rational for this, these should vertical align.
Test Plan: Project headers with watching buttons.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18520
Summary: This is an older CSS rule that's no longer needed on mobile.
Test Plan: view history view with harbormaster results
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18507
Summary: Implements a new mobile view thats more fullscreen, not boxed, so more space. Fixes issues with mobile tables when scrolling overflowed content.
Test Plan: Test home, branch, tags, code, file browse, graph, compare, history, readme, open revisions, owners.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18505
Summary:
Ref T12819. Ferret currently does substring search, but this is not the default mode users expect: when you search for the "RICO" act, you do not expect to find documents containing "apRICOt" even though "RICO" is a substring.
To support term search, index the corpus as a list of terms with puncutation removed and whitespace normalized so the engine can match against it.
Test Plan:
Ran `storage upgrade`, ran `search index`, saw sensible database results:
```
rawCorpus: This is the task description.
Hark! Whom'st'dve eaten this "food" shall surely ~perish~?? #blessed
normalCorpus: thi the task descript hark whom dve eaten food shall sure perish bless
termCorpus: This is the task description Hark Whom'st'dve eaten this food shall surely perish blessed
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18498
Summary:
Ref T12819. This addresses two issues:
- One practical issue is that right now, if you search for "dog cat", and they appear in different fields (for example, "dog" appears ONLY in the title, while "cat" appears ONLY in a comment) we won't find the document. This is somewhat rare -- usually, if "dog" appears in the title, it's also repeated in the description -- but I think clearly a bug. To attack this, start automatically creating a virtual "ALL" field with the full document text which we'll use as the primary thing we match against.
- For fields which may occur more than once -- today, only comments -- aggregate them all into one big "all of the text" row instead of writing one row per comment. This partly addresses the first point ("dog" in one comment and "cat" in a different comment won't be found) and partly makes some of the query gymnastics easier.
Test Plan:
Ran `bin/storage upgrade`, ran `bin/search index <Txxx>`, saw sensible corpus values in the database:
```
mysql> select * from maniphest_task_ffield\G
*************************** 1. row ***************************
id: 3
documentID: 1981
fieldKey: full
rawCorpus: This is the task title
This is the task description.
normalCorpus: thi the task titl
thi the task descript
*************************** 2. row ***************************
id: 4
documentID: 1981
fieldKey: titl
rawCorpus: This is the task title
normalCorpus: thi the task titl
*************************** 3. row ***************************
id: 5
documentID: 1981
fieldKey: body
rawCorpus: This is the task description.
normalCorpus: thi the task descript
3 rows in set (0.00 sec)
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18497
Summary: Only for grey buttons, but can expand. Sets a selected class.
Test Plan: Review new changes in UIExamples.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18501
Summary: Simplifies the UI here by removing various borders, instead using just background colors and better alignment.
Test Plan: Test instances, settings, home, projects, workboards.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18488
Summary:
Ref T12819. I gave this stuff a sweet code name because all the terms related to "fulltext" and "search" already mean 5 different things. It, uh, ferrets out documents for you?
I'm building this to work a lot like the existing ngram index, which seems to work pretty well. If this sticks, it will auto-resolve the join issue (in T12443) by letting us do the entire thing locally in a JOIN and thus dodge a lot of mess.
This index gets built alongside other indexes, but only shows up in the UI if you have prototypes enabled. If you do, it appears under the existing fulltext field in Maniphest. No existing functionality is affected or disrupted.
NOTE: The query engine half of this is still EXTREMELY primitive, and this probably performs worse than the existing field for now. If this doesn't show obvious signs of being awful on `secure` I'll improve that in followup changes.
Test Plan:
Indexed my tasks, ran some simple queries, got the results I wanted, even for queries "ko", "k", "v0.1".
{F5147746}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819, T12443
Differential Revision: https://secure.phabricator.com/D18484
Summary: Fixes T8944. Adds a small dot if notification is new along with color. Goes away when clicked. Increased font and padding for readability.
Test Plan: Send notifications from test account, review them in menu, application search, and in real-time display.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T8944
Differential Revision: https://secure.phabricator.com/D18485
Summary: Just deletes the view code until I have time to better plan this out, or just not ship.
Test Plan: Visit Phame post on public logged out page, view count doesnt cause transaction fatal.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18475
Summary: My fake data was 100%, and not all tables have full revision history. This leads to a broken table. Instead check if we have //any// revisions at all, then always show the column, with or without a link inside.
Test Plan: going on a limb this is the correct fix and test on secure... again ...
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18474
Summary: There is still some layout issues with revisions, so I've tested it better and moved it to it's own column
Test Plan: Fake in some revision data, test various sizes and shapes.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18473
Summary: Ref D17991, this rule got more specific with shade tag re-write, so needs updating for headers.
Test Plan: Review a differential header, first icon is now 15px instead of 12px
Reviewers: epriestley, avivey
Reviewed By: avivey
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18472
Summary:
Ref T12956. After this change, individual users will no longer be able to modify builtin queries on a user-by-user basis: they will always appear at the bottom of the list, under their personal queries, and can only be managed by administrators.
To support this, clean up the old rows which could be hanging around from before: delete any personal saved queries where the saved query is a builtin query.
To ease this transition, try to pin the query we're deleting //if// the user had reordered things to put it on top.
Test Plan:
- Ran the migration, saw no changes in the UI but fewer rows.
- Went back to `master`, reordered queries to put a builtin one on top.
- Ran the migration.
- Saw that builtin one drop to the bottom (since it can't be on top anymore) but be pinned, preserving the behavior of `/maniphest/`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12956
Differential Revision: https://secure.phabricator.com/D18464
Summary:
Ref T12956. Currently, when you visit `/maniphest/` (or any other ApplicationSearch application) we execute the first query in the list by default.
In T12956, I plan to make changes so that personal queries are always first, then global/builtin queries. Without changing the "default query" rule, this will make it harder to have, for example, some custom queries in Differential but still run a global query like "Active" by default. To make this work, you'd have to save a personal copy of the "Active" query, then put it at the top.
This feels a bit cumbersome and this rule is kind of implicit and a little weird anyway. To make this work a little better as we make changes here, add an explicit pinning action, like the one we have in Project ProfileMenus.
You can now explicitly choose a query to make default.
Test Plan:
- Browsed without pinning anything, saw normal behavior.
- Pinned queries, viewed `/maniphest/`, saw a non-initial query selected by default.
- Pinned a query, deleted it, nothing exploded.
{F5098484}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12956
Differential Revision: https://secure.phabricator.com/D18422
Summary: This is wierd and I can't think of a use for it? Causing issues on hover states.
Test Plan: Action list, menus, dropdowns, etc. Labels shouldn't have hover states.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18463
Summary: Using icons and dropdown buttons without text looks a little wonky, this resets the CSS a bit.
Test Plan: Review button with icon and text, just icon, just test, and dropdowns.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18461
Summary: These items should be floated, not display: block.
Test Plan: Test blame view with commits AND revisions, check they display inline.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18462
Summary: Fixes T12792. Expands the Notifications to "web, desktop, both, or none" for real-time notifications in settings.
Test Plan: Test with "test notifications" button, and while logged into two accounts with each of the 4 settings.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T12792
Differential Revision: https://secure.phabricator.com/D18457
Summary: Ref T12824, adds more information to the blame view, exposes date, commit summary, lighter colors.
Test Plan:
Review many diffs with and without blame on.
{F5111758}
{F5111759}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T12824
Differential Revision: https://secure.phabricator.com/D18452
Summary: This adds a very very basic view count to Phame, so bloggers can get some idea which posts are more popular than others. Anything more than this I think should be Facts or Google Analytics.
Test Plan: Write a new post, see post count. Reload page, post count goes up. Archive post, post count stays the same.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18446
Summary: Moves browseFile to single column, implements Owners as a list under the file (and now directory as well), improved information listed in Owners, and moves actions into the Diffusion action bar instead of the header.
Test Plan:
Test browsing directories, files, text, images, binaries, enabling blame. Mobile and desktop.
{F5111045}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18448
Summary: These can wrap on iPhone 5 screens, no need for so much padding.
Test Plan: iPhone 5 simulator, tablet and mobile.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18437
Summary: Simplifies the page, adds base support for PHUITwoColumn fixed from Instances (which I'll delete css there).
Test Plan:
click on every settings page, UI seems in tact, check mobile, desktop, mobile menus.
{F5102572}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18436
Summary: Moves the method up to DiffusionController, so it can be more universally used. Also now center aligns tabs on mobile. Still todo, get search nicely toggled on mobile
Test Plan: Test mobile, desktop. Test search from home, from browse, and browsing a specific path.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18432
Summary: Moving this down the the "bar" to allow pattern search on home. Rebuilds the mobile layout a little.
Test Plan:
Test actions on mobile, desktop, tablet.
{F5100460}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18431
Summary: Roughs this in a little, kinda basic. Allows for grouping results by page. A bit better on mobile. Would like more content return from conduit though.
Test Plan:
Test `CMS`, `cms`, and `OMGLOLWTFBBQ`, desktop and mobile
{F5099081}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18429
Summary: This is only on browse pages, but I think could be global (home) also. Moves it from a button, field, to just a field.
Test Plan:
Review search on desktop, mobile.
{F5098886}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18428
Summary: Uses `fire`, `underline`. Sets text that overflows to ellipsis.
Test Plan:
Test searching for CMS in Phabricator. Check other typeaheads, tokenizers.
{F5098496}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18424
Summary: Getting to the straight browse view went away, this adds a link back. I'll look at more long term solution for getting to grep search.
Test Plan: Click on header, get take to browse view.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18421
Summary:
Ref T2543. This updates and migrates the status change transactions:
- All storage now records the modern modular transaction ("differential.revision.status"), not the obsolete non-modular transaction ("differential:status").
- All storage now records the modern constants ("accepted"), not the obsolete numeric values ("2").
Test Plan:
- Selected all the relevant rows before/after migration, data looked sane.
- Browsed around, reviewed timelines, no changes after migration.
- Changed revision states, saw appropriate new transactions in the database and timeline rendering.
- Grepped for `differential:status`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18419
Summary:
Ref T2543. Rewrites all the storage to use constants.
Note that transactions still use legacy values, I'll migrate and update them separately.
Test Plan:
- Ran migration.
- Browsed around, changed revision states, viewed dashboard, etc.
- Selected `DISTINCT()` and `GROUP_CONCAT()` of the `status` field in the database, saw sane/expected before and after values.
- Verified that old Conduit methods still return numeric constants for compatibility.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18418
Summary: The things you find testing production.
Test Plan: Run sprite, celerity
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18409
Summary: Ref T2543. This migrates existing saved queries so they use the right modern values for the new tokenizer control, introduced in D18393.
Test Plan:
- Saved a query with "Abandoned" selected as the status in the old "<select />", prior to D18393.
- Upgraded to D18393, which broke the query (it no longer selected any status filter).
- Ran the migration to fix things.
- Saw the query now execute with "Abandoned" selected in the tokenizer, preseving the original behavior accurately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18394
Summary:
Fixes T12960. When the user enters a date like "1917", we currently loop ~20 million times.
Instead:
- Be a little more careful about parsing.
- Javascript's default behavior of interpreting "2001-02-31" as "2001-03-03" ("February 31" -> "March 3") already seems reasonable, so just let it do that.
Test Plan:
Verified these behaviors:
- `2017-08-08` - Valid, recent.
- `17-08-08` - Valid, recent.
- `1917-08-08` - Valid, a century ago, no loop.
- `2017-02-31` - "February 31", interpreted as "March 3" by Javascsript, seems reasonable.
- `Quack` - Default, current time.
- `0/0/0`, `0/99/0` - Default, current time.
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T12960
Differential Revision: https://secure.phabricator.com/D18383
Summary: Makes dialogs a little wider, form dialogs a lot wider (space controls). Also cleans up Passphrase dialogs. Fixes T12833. I think forms probably need to move to tables for better layout flexibility like veritical alignment.
Test Plan: Passphrase create, edit, etc. Other dialogs.
Reviewers: epriestley
Subscribers: Korvin
Maniphest Tasks: T12833
Differential Revision: https://secure.phabricator.com/D18382
Summary: This is no longer needed after the chatbot was removed in D17756.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18378
Summary: Just a few more.
Test Plan: Edit Picture, see new image, choose image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18370
Summary: Centers tabs when used above the page header when on mobile.
Test Plan: Test mobile and desktop layouts of Instances.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18368
Summary: If we don't have any panels, just an action list, we want to hide the entire box on mobile since it's just an empty line.
Test Plan: Review Owners, Differential curtains on mobile, desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18350
Summary: We don't ever set fluid, since it already is fluid, also no CSS. Add an actual fixed version.
Test Plan: For use in Instances.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18336
Summary: Rather than have tabs live in two column view, sometimes like `admin` we'll want a global set of tabs that work well with all layouts and crumbs.
Test Plan:
I tested this in an upcoming diff for instances.
{F5080228}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18332
Summary: Allows setting on an image here if wanted.
Test Plan: Set a rocket to launch a new instance on rSAAS
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18334
Summary:
Ref T10252. The previous fix rPa8a9fddb0738 only works for macOS.
Under Windows the @ symbol is composed of AltGr+q. For Chrome and Edge the "AltGr" keypressEvent is like pressing the Control key and the Alt key at the same time.
This fix changes the condition in such a way, that this case (pressing Control and Alt at the same time) is not blocked.
Test Plan:
Testing for the issue:
- Launch Windows 10, Select German Keyboard, Use latest Chrome (60)
- Observe typing `@` does not trigger typeahead
- Apply patch, retest, see typeahead.
Regression tested:
- Windows 10, Chrome, Firefox, Edge
- Mac OS, Chrome, Firefox, Safari
- Keyboard layouts, English, French, German, Spanish
All tests passed
Reviewers: benwick, epriestley
Reviewed By: epriestley
Subscribers: epriestley
Maniphest Tasks: T10252
Differential Revision: https://secure.phabricator.com/D18269
Summary: Felt like tinkering with Illustrator.
Test Plan: Edit Picture, pick new image.
Reviewers: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18301
Summary: Additonal option to use newly made images in these views.
Test Plan:
Built an example in UIExamples.
{F5071682}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18299
Summary: We've never used this, and no current plans to.
Test Plan: grep for use cases.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18298
Summary: Moves over some of the icons we build for SAAS that can be useful for projects to. Also make builtin list dynamic.
Test Plan: Edit a project image, select a cool sword.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18297
Summary: Adds dropdown carets to buttons more universally that are actually dropdowns.
Test Plan: Differential, Application Search, Diffusion. Mobile and Desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18292
Summary: Fixes T12930. I can't verify this fix, but the colors here work in light/dark mode correctly.
Test Plan: Wait for @cspeckmim to verify
Reviewers: epriestley, cspeckmim
Reviewed By: cspeckmim
Subscribers: cspeckmim, Korvin
Maniphest Tasks: T12930
Differential Revision: https://secure.phabricator.com/D18286
Summary: Fixes T12931. Adds a branch selector that's always visible if the repo has commits.
Test Plan:
Test a plain hg, svn, git repository. Test setting a bad default branch. Test a good default branch. Test on desktop, mobile layouts.
{F5058061}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12931
Differential Revision: https://secure.phabricator.com/D18267
Summary: Ref T12733. In this case, the server returns no new `row`, but we would incorrectly try to bind to one.
Test Plan:
- Created a new comment.
- Edited it.
- Deleted all the text.
- Saved changes.
- Before: Header continues to show phantom "1 Unsubmitted Comment", browser error log reflects one error.
- After: Header reflects comment being deleted, error log is quiet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18262
Summary: Moves default color back to black, increases line-height to clean new object borders
Test Plan: Review lots of remarkup in sb, this is same height as "document" CSS.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18249
Summary: Cleans up a bunch of Differential odd/special colors. Adds some basic "highlight" colors instead of pure yellow.
Test Plan: Test each color change in normal and dark modes.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18239
Summary: Mostly this is an exercise to clean up our CSS and Celerity processor by making sure all important color decisions are generatable. It's somewhat resonable to use if you don't review code. Posting it up here mostly so I don't lose the work.
Test Plan: Visit lots and lots of pages with dark mode on and off.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18227
Summary: Just some cleanup. Make sure action-bar has consistent space if locate is there or not, hide tabs if repository has no content. Use clone or checkout language depending on SCM. Fixes T12915.
Test Plan:
Test git, hg, svn blank states.
{F5042707}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12915
Differential Revision: https://secure.phabricator.com/D18208
Summary: First pass at providing a skeleton framework for laying out basic items in a left/right view. Will likely add some mobile-responsive options.
Test Plan: UIExamples
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18200
Summary: This moves actions into the Diffusion main header, removes the locate file box, and widens description and cloning details. Projects are not currently in this layout, but will follow up in another diff. Trying to keep these changes small and iterative.
Test Plan:
Locate some files, test actions dropdown, repository with and without description. Also tablet, mobile layouts.
{F5040026}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18193
Summary: Cleans up colors, removes commit hash and links the text instead. Also unsure how valuable "lint" column is here, but left it. I'd maybe like to understand that workflow since it just seems like clutter overall. Also Fixes T12905
Test Plan:
Review Phabricator, hg, and a few other test repositories locally. Holler if anything here seems bad, but this feels easier to read and use to me.
{F5038425}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12905
Differential Revision: https://secure.phabricator.com/D18189
Summary: More pretty images.
Test Plan: Set a robot as image for security project. So pretty.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18191
Summary: The main change here is moving (compare, search, history) into buttons in the header bar on all browse views. This allows Directory Browsing to be full width, since there is no other curtain information. File, Image, LFS, Binary all stay in TwoColumn layouts with the same buttons in the header.
Test Plan: Test viewing a directory, file, image, binary file, readme, and fake a gitlfs.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17766
Summary: Updates the builtin images, leaves the old choose... icons for now. I'd like to automate this based on icon when creating a project.
Test Plan: Visit edit picture page, pick a few. Purge cache, see new default image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18162
Summary: Builds out a responsive tab bar system for PHUITwoColumnView pages
Test Plan:
Tested at mobile, tablet, and desktop breakpoints
{F5012429}
{F5012430}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18148
Summary: Updated Files, no more AA issue.
Test Plan: look
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18144
Summary: Had some made, they seem better than my attempt.
Test Plan: review in sandbox.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: avivey, Korvin
Maniphest Tasks: T12859
Differential Revision: https://secure.phabricator.com/D18143
Summary: Fixes T12850, marks it hidden with zero width so the element still exists in the DOM
Test Plan: T12850 code, locally
Reviewers: epriestley, amckinley, avivey
Reviewed By: avivey
Subscribers: Korvin
Maniphest Tasks: T12850
Differential Revision: https://secure.phabricator.com/D18130
Summary:
Fixes T8909. Ref T12733.
UI attempts to follow the mock, but is a bit rough since PHUIXButtonView without text in this menu gets weird spacing, we don't have circular buttons yet, and PHUIXActionView without an icon also gets odd spacing.
Test Plan: {F5003125}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733, T8909
Differential Revision: https://secure.phabricator.com/D18128
Summary:
Ref T12733. When a revision has unsubmitted checkmarks:
- Color the banner yellow.
- Show them in the "X unsubmitted" count.
- Make the "X unsubmitted" button cycle between all drafts (written but unpublished comments) and "draft done" (checked but unsubmitted "Done" checkbox comments).
Test Plan:
- Checked a "Done" box, saw "1 unsubmitted" and yellow banner.
- Clicked "5 unsubmitted" repeatedly, saw it cycle through all unsubmitted comments and checkboxes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18127
Summary:
Ref T12733. This paves the way for a separate "hide" operation which completely hides things.
(I didn't extend this to the server side because that would require schema changes and the new "hide" state is client-only.)
Test Plan: Collapsed and expanded inlines, viewed tooltips.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18126
Summary: Fixes T12124. Changes `ManiphestEditEngine` to populate the select using priority keywords instead of the integer value. Marks `maniphest.querystatuses` as frozen. Adds a new Conduit method for fetching potential task statuses.
Test Plan: Created tasks and changed their priorities, observed that transactions in the DB still have the same type (integers as strings). Invoked `maniphest.update` with `priority => '90'` and observed that it still works. Invoked `maniphest.edit` with `priority => 'unbreak'` and observed that it now works.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T12124
Differential Revision: https://secure.phabricator.com/D18111
Summary: Adds a new DiffusionBranchListView which replaces the BranchTable when browsing all branches in Diffusion. Has all the same capabilities, but is easier to read, adds a Compare button, and plays nicely on mobile. It does take up more space, but I think that's generally OK here since we expect our branches to not be heaping piles of intern revert branches.
Test Plan:
Follow a few repositories with branches, like Phabricator and KDE's Krita. View layouts on mobile, tablet, desktop. Try out new compare button.
{F4996207}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: avivey, Korvin
Maniphest Tasks: T12824
Differential Revision: https://secure.phabricator.com/D18113
Summary: I think these are a hair nicer in the actual UI.
Test Plan: Revisit /diffusion/
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18118
Summary: Builds out some images to use to identify repositories. Fixes T12825.
Test Plan:
Try setting custom, built in, and null images.
{F4998175}
{F4998192}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12825
Differential Revision: https://secure.phabricator.com/D18116
Summary: Adds spacing to the buttons, line-height for aligning text vertically.
Test Plan: Leave comments on a diff.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18110
Summary:
See D18037. The migration there may cause us to write new file records as a side effect.
Ideally, we would rewrite that migration to not ever have this kind of side effect. However, that would make it much more complicated, and it's already very complicated.
Instead, retroactively expand the size of this field before `storage adjust` does it, so it has the right size by the time we hit the migration in D18037.
Test Plan:
@chad, can you `arc patch` this and see if it works?
It's possible that it will get us about five lines deeper and then we'll just hit another similar exception, and that this isn't really a viable way forward.
Reviewers: chad, amckinley
Reviewed By: amckinley
Subscribers: amckinley, chad
Differential Revision: https://secure.phabricator.com/D18107
Summary: Should be button-grey
Test Plan: Use object selector on a diff for a task
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18100
Summary: Does the UI work that's part of T12234 and adds migrations for both of the old-style duplicate transactions.
Test Plan:
- Started with a clean DB.
- Checked out really old code that marks tasks as dupes using comments.
- Made a bunch of tasks and closed some as dupes. Made a bunch of additional comments.
- Checked out D10427 and did a `storage upgrade`.
- Made a bunch more new tasks and dupes.
- Snapshotted DB.
- Ran migration repeatedly until all expected edges showed up in the `phabricator_maniphest.edge`table.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T12234
Differential Revision: https://secure.phabricator.com/D18037
Summary: These are now unused.
Test Plan: grep, remove uiexamples
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18090
Summary: This probably got nuked at some point, but the class is there so let's use it.
Test Plan: Browse a directory with 800 files. See pager change color.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18089
Summary: Updates to use the standard 13px size we use everywhere else, cleans up a few mobile/display bugs, adds a hover state for `tr`.
Test Plan:
Review Diffusion, Daemons, Almanac, People Logs, anything else?
{F4991070}
{F4991071}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18088
Summary: Padding is ridiculously large on mobile devices, shrink it.
Test Plan: Review in simulator.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18087
Summary: Little nits and spacing changes to viewing diffusion commit history on phones.
Test Plan:
Review in Chrome, iOS Simulator.
{F4990749}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18085
Summary: This is a little too agressive, it's meant to only color direct icons, not icons inside tags if the object item is disabled.
Test Plan: Check closed tasks and see icon colors inside tags, check a disabled project, see disabled color.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18084
Summary: Minor, adds some weightier checkbox styles for use in Remarkup.
Test Plan:
Test a task, Phriction, various remarkup list styles.
{F4990161}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: cspeckmim, Korvin
Differential Revision: https://secure.phabricator.com/D18080
Summary: Try to dis-ambiguate various button types and colors. Moves `simple` to `phui-button-simple` and moves colors to `button-color`.
Test Plan: Grep for buttons still inline, UIExamples, PHUIX, Herald, and Email Preferences.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18077
Summary: Ref M1476. Same as D18070 but that did most of the magic.
Test Plan: {F4987961}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18071
Summary: Formally support borderless tags in PHUITagView.
Test Plan: Used in Diffusion History List
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18074
Summary: Some unneeded CSS here.
Test Plan: Click on ToC button, see more normal colors.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18073
Summary: Saturate the color a little more, add yellow
Test Plan: uiexamples
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18068
Summary:
- Add a simple green button... maybe don't need
- Fix tokenizer search icon
- Splite simple and button-bar into own files
Test Plan: uiexamples, various pages with buttons, diffusion
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18063
Summary: Ref T12779. Try a little harder to get the autoscroll heuristic right, but also just stick to anchors if the URL has an anchor and the scroll position is near that anchor.
Test Plan:
- Loaded an anchored diff at a bunch of window sizes, seemed pretty sticky.
- Added `usleep(100000 * mt_rand(1, 15))` to `ChangesetViewController` to make changesets load slowly and in random order, reloaded a bunch of times while scrolling around, things appeared reasonable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12779
Differential Revision: https://secure.phabricator.com/D18060
Summary: Ref rPf2fcafb40dde94ddf4ee22716fea74fca0334a64#38208, I think this is a more usable layout. Gets rid of clippy, audit. Adds back Differential link as tag, Build Status as button.
Test Plan: Faked data on this for Differential, Builds, should all work though. Test on real and fake repositories.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18061
Summary: Let's buttons just be an icon, no pressure to also have text.
Test Plan: UIExamples, Search, Home, Policy Controls... Probably 99% of them.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18056
Summary: Ref T12780. I'd like 18,000 GitHub stars now please thank you
Test Plan: this feature is awful
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T12780
Differential Revision: https://secure.phabricator.com/D18053
Summary: Ref T12780. Button styles are bleeding over here on the icon, restrict to .button classes
Test Plan: uiexamples.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12780
Differential Revision: https://secure.phabricator.com/D18055
Summary:
Ref T12733. Ref M1476. This adds `PHUIXButtonView`, for client-side button rendering.
It also adds a PHUIX example which renders the server and client versions of each component side-by-side so it's easier to see if they're messed up.
Test Plan: {F4984128}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18051
Summary: Ref M1476. I'm going to see if I can set up side-by-side "PHUI" vs "PHUIX" to make maintaining them a touch easier. Before doing that, nuke some really old UI examples that don't seem very useful.
Test Plan: Viewed UIExamples, saw fewer bad ones.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18049
Summary: Ref T12733. This adds classes for unsubmitted/unsaved changes, and lays some groundwork for additional buttons.
Test Plan:
- Added, edited, deleted comments.
- Saw bar background color update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18045
Summary: Ref T12733. This ultimately conflicts with scrolling and took about two days to get reported as a bug/regression. See T12733 for a bunch of additional discussion. See T1026 for original discussion.
Test Plan:
- Left single-line and multi-line comments on desktop.
- Tapped to leave single-line comments on mobile.
- Dragged lines on mobile, got a scroll instead of a range comment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18044
Summary: Ref T12733. Completely removes the objectives UI.
Test Plan:
- Grepped for `objective`, etc.
- Browsed revisions, no JS errors / broken stuff.
- (If I missed anything, it's likely to turn up in followup changes.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18043
Summary: This moves Diffusion History to use an easier to parse list view for commits and their (diff, audit, build) status. I left TableView around, which is used on a repositories home, and we can maybe add a "graph view" history back as another controller. Not sure what the real use is for that kind of feature though. I don't have Harbormaster set up locally so I could use another install to give this a run. I also expect to maybe not live with this UI as final, I like the UX, but the icons for indicating status don't really feel great to me, just OK.
Test Plan:
pull various repositories, check various history displays.
{F4980356}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18039
Summary: These are unfortunatly manually built so I missed them in testing circle view changes.
Test Plan: Test lightbox, conpherence, uiexamples
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18036
Summary: I think this is reasonable for my current use case, but stacking icons overally is pretty clunky.
Test Plan:
UIExamples
{F4978899}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18032
Summary: Fixes T12505. `PhabricatorProjectsMembershipIndexEngineExtension->materializeProject()` was incorrectly bailing early for milestone objects, which prevented milestone members from being calculated correctly. This was causing problems where (for example) an Owners package owned by a milestone wasn't being satisfied when a member of the milestone approved a revision.
Test Plan: Invoked migration, observed that a user's milestones correctly showed up when searched for. Also observed that accepting a revision on behalf of a milestone now satisfies Owners rules.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12505
Differential Revision: https://secure.phabricator.com/D18033
Summary: Adds some indentation and color. Ref T9868.
Test Plan: A long page with multiple indentation levels.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9868
Differential Revision: https://secure.phabricator.com/D18025
Summary: Makes this a bit more flexible and allow UI to take over `col-2` completely. Also cleaned up application search a little with tags
Test Plan: Review various pages, grep for callsites.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18021
Summary: Some of these are unused, defaults to a lighter color naturally.
Test Plan: uiexamples, grep, phriction
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18020
Summary:
Fixes T6906.
I found the code in `behavior-search-typeahead.js` that was throwing away the closedness-detction work done in `Prejab.js::transformDatasourceResults`. Modified it to re-add the correct class name to the `phabricator-main-search-typeahead-result` elements.
Then I found some CSS in `typeahead-browse.css` and completely flailed around until realizing that particular CSS only gets loaded when hitting the typeahead endpoint directly. Copied the relevant bit of CSS over to `main-menu-view.css` (but maybe it should be removed from `typeahead-browse.css`?).
This is my first JS/CSS change, so please don't assume I did anything right.
Test Plan: {F4975800}
Reviewers: #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: epriestley
Maniphest Tasks: T6906
Differential Revision: https://secure.phabricator.com/D18017
Summary:
Ref T12738. This makes clicking "Throw In Trash" technically do something, sort of.
In Nuance, the default mode of operation for actions is asynchronous -- so you don't have to wait for a response from Twitter or GitHub after you mash the "send default reply tweet" / "close this pull request with a nice response" button and can move directly to the next item instead.
In the future, some operations will attempt to apply synchronously (e.g., local actions like "ignore this item forever"). This fakes our way through that for now.
There's also no connection to the action actually doing anything yet, but I'll probably rig that up next.
Test Plan: {F4975227}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12738
Differential Revision: https://secure.phabricator.com/D18010
Summary: Ref T12738. Some of the Nuance "form" workflows currently fatal after work on the GitHub stuff. Try to make everything stop fataling, at least.
Test Plan: Using "Complaints Form" no longer fatals, and now lodges a complaint instead.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12738
Differential Revision: https://secure.phabricator.com/D18007
Summary: Gives the ability to hide a big long block of text in an ObjectListItem without cluttering the UI.
Test Plan:
Added a test case to UIExamples. Click on icon, see content. Click again, content go away.
{F4974153}
{F4974311}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18006
Summary: Going to play a bit with this layout (diffusion sans audit) and see how it feels on profile. Uses a user image, moves the commit hash (easily selectible) and separates commits by date.
Test Plan:
Review profiles with and without commits.
{F4973987}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18005
Summary: Grep for phui-tag-shade and verify we're no longer calling shade-color directly.
Test Plan: Search, workboard, story points, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17993
Summary: Adds a new tag type, starts to try to clean up the mess that are PHUITags
Test Plan:
Review UIExamples.
{F4972323}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17991
Summary: Ref T12733. When an inline is selected, make it stand out so you can see where you are in the document more clearly.
Test Plan: {F4968509}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17982
Summary: Ref T12733. Show a "reply" icon for replies, and make them stack directly under their parent.
Test Plan: {F4968500}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17981
Summary: Ref T12733. Shows a comment snippet when hovering inlines in the objective list.
Test Plan: {F4968490}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17980
Summary: Ref T12733. Currently, creating a new inline and then canceling it leaves a marker in the objective list. Instead, remove the marker.
Test Plan:
- Created an empty inline, cancelled. Created a non-empty inline, cancelled. No objective marker in either case.
- Created a new normal inline, objective marker.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17979
Summary:
Ref T12733. When creating a new comment, the objective could appear to far up in the scrollbar because we were anchoring it to an invisible row.
Instead, anchor to the "edit" row while editing.
Test Plan: Created a new comment at the very top of a file, saw "File, Star" icons instead of "Star, File".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17978
Summary:
Ref T12733.
- While editing a comment, show a pink star ({icon star, color=pink}) with a tooltip.
- Slight UI tweaks, including draft comments getting an indigo pencil ({icon pencil, color=indigo}).
Test Plan: {F4968470}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17977
Summary: Ref T12733. Currently, long filenames get cut off at 160px. Instead, don't cut them off.
Test Plan:
Before:
{F4968401}
After:
{F4968402}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17975
Summary:
Ref T12733. In the longer run I'd like to just push this out from the edge, but that currently gets us into trouble since we start bumping into content. On my system, the trackpad scrollbar also expands in size when moused over, so the minimum number of pixels we need to push it out is approximatley 15px. This hits body content and the persistent chat.
For now, just disable this element on trackpad systems.
Test Plan:
Disconnected all USB peripherals, quit and relaunched Safari, saw no objective list.
Reconnected mouse, relaunched Safari, saw objective list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17974
Summary: See D17955.
Test Plan: Loaded a revision, no longer saw annotations with prototypes off. Still saw annotations with prototypes on.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17983
Summary:
Ref T12733. Currently, we detect the changeset which is in the middle of the screen as the current changeset.
This doesn't always get us the most intuitive changeset, particularly after a navigation from the scroll objective list: when you jump to changeset "X", you'd tend to expect "X" to be shown in the header, but the //next// changeset may be shown if "X" is too short.
Instead, select the changeset near the top of the screen (spanning an invisible line slightly below the banner).
Test Plan: Scrolled and jumped through a document with long and short changesets, saw a more intuitive changeset selected by the banner.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17976
Summary:
Minor UI tweaks:
- Use the dynamic icon for each file (e.g., image, text), not a hard-coded icon.
- Render the path (less important) in grey and the filename (more important) in black.
Test Plan: {F4966176}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17957
Summary:
Add important objectives (like waygates and quest markers) to the minimap.
This also probably fixes @cspeckmim's bug with the {key @} keyboard shortcut.
Test Plan:
(This is probably easier to undestand if you `arc patch` + click around.)
{F4966037}
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: cspeckmim
Differential Revision: https://secure.phabricator.com/D17955
Summary: Brings more UI tweaks to disabled objects, like projects/people. Also fixes a missing icon in projects.
Test Plan: Application search with people and projects that have disabled results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12732
Differential Revision: https://secure.phabricator.com/D17962
Summary: This allows adding of pinboard items to a timeline. I'm hoping we can get this in for Maniphest (Pholio, Cover Image) and Macro (because, Macro), but unsure how to scalably do this. Anyways, here's the front end.
Test Plan:
Make some fake timeline items in UIExamples, test mobile, tablet, and desktop breakpoints.
{F4965798}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17950
Summary:
Fixes T1591. This was removed long ago because it was a mess to implement and caused a bunch of weird issues, and also my tolerance for dealing with weird JS issues was much, much lower.
I have now survived the fires of JX.Scrollbar and would love to address 200 small nitpicks about obscure browser behaviors on Linux, so open the floodgates again.
A secondary goal here is to create room to add a global view state menu on the right, with 300 options like "hide all inlines", "hide done inlines", "hide collapsed inlines", "hide ghosts", "show ghosts", "enable filetree", "disable filetree", etc, etc. Not sure how much of this I'll actually do. I have one more experiment I want to try first.
Test Plan: {F4963294}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T1591
Differential Revision: https://secure.phabricator.com/D17945
Summary:
Ref T12616. This puts "h" back to collapse or expand the current file.
This removes some very complicated/messy code around following links in the table of contents and getting files auto-expanded. I suspect no one will miss this, but we can restore it if ayone notices.
Test Plan: Pressed "h" to collapse/expand a file. Also used the menu items.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17940
