Summary: In D11722, a `getGroup()` method was added to all subclasses of `PhabricatorApplicationConfigOptions`, but no abstract method was added to the base class. This will fail if a custom `*ConfigOptions` class does not provide a `getGroup()` method, in which case `$group->getGroup()` (in `PhabricatorConfigListController`) will fatal.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11756
Summary: This diff moves the default monospace font from a Global Default config value to CSS. What this will allow is some flexibility in changing this font in other areas (like Diviner and DocumentView) without changing the defaults globally. However if the admin sets a config value or a user sets a config value, that value will trump all settings in the CSS files with an !important declaration in the page head.
Test Plan:
Currently tested:
- Setting no value
- Setting an admin value
- Setting a user value
Verify remarkup blocks in Differential, Diviner, Conpherence, and Diffusion look as expected.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11597
Summary: Moves the setting from Core to UI, also adds a link to the task for further instructions.
Test Plan: Load up config in sandbox, see new instructions.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4214
Differential Revision: https://secure.phabricator.com/D11900
Summary: See IRC. This check is somewhat misleading right now because it could arise from a mangled/broken Host header rather than a bad `phabricator.base-uri` configuration.
Test Plan: Faked this to trip, read all the text.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11894
Summary:
Fixes T7287. This trades off 4-byte character support for case insensitivity in these columns, which is a much better trade on the balance.
Also adds more warnings about old MySQL. Note that we already issue a warning when you run "storage adjust" (which I've made stronger) and already "strongly recommend" MySQL 5.5 or newer in the install documentation.
Test Plan:
- Ran `storage adjust --disable-utf8mb4` to go to old definitions, then ran `storage adjust` to get back to the new ones. Everything seemed OK in both cases.
- Verified that utf8mb4 data can be migrated out of these colums with `--unsafe` (which will truncate).
- Verified that manual explains this.
- Faked my way into the setup warning.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7287
Differential Revision: https://secure.phabricator.com/D11893
Summary: Fixes T7165. Let users specify a file phid in config, and then use that file via an inline style tag. Also, cache the URI so that we don't have to query the file on every page load.
Test Plan: {F319050}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7165
Differential Revision: https://secure.phabricator.com/D11886
Summary: Ref T7352. This is pretty straightforward. I renamed `phd.start-taskmasters` to `phd.taskmasters` for clarity.
Test Plan:
- Ran `phd start`, `phd start --autoscale-reserve 0.25`, `phd restart --autoscale-reserve 0.25`, etc.
- Examined PID file to see options were passed.
- I'm defaulting this off (0 reserve) and making it a flag rather than an option because it's a very advanced feature which is probably not useful outside of instancing.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7352
Differential Revision: https://secure.phabricator.com/D11871
Summary:
Ref T6840. This feels a little dirty; open to alternate suggestions.
We currently have a race condition where multiple daemons may load a commit and then save it at the same time, when processing "reverts X" text. Prior to this feature, two daemons would never load a commit at the same time.
The "reverts X" load/save has no effect (doesn't change any object properties), but it will set the state back to the loaded state on save(). This overwrites any flag updates made to the commit in the meantime, and can produce the race in T6840.
In other cases (triggers, harbormaster, repositories) we deal with this kind of problem with "append-only-updates + single-consumer", or a bunch of locking. There isn't really a good place to add a single consumer for commits, since a lot of daemons need to access them. We could move the flags column to a separate table, but this feels pretty complicated. And locking is messy, also mostly because we have so many consumers.
Just exempting this column (which has unusual behavior) from `save()` feels OK-ish? I don't know if we'll have other use cases for this, and I like it even less if we never do, but this patch is pretty small and feels fairly understandable (that said, I also don't like that it can make some properties just silently not update if you aren't on the lookout).
So, this is //a// fix, and feels simplest/least-bad for the moment to me, I thiiink.
Test Plan: Added and executed unit tests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6840
Differential Revision: https://secure.phabricator.com/D11822
Summary:
Ref T4340. The attack this prevents is:
- An adversary penetrates your network. They acquire one of two capabilities:
- Your server is either configured to accept both HTTP and HTTPS, and they acquire the capability to observe HTTP traffic.
- Or your server is configured to accept only HTTPS, and they acquire the capability to control DNS or routing. In this case, they start a proxy server to expose your secure service over HTTP.
- They send you a link to `http://secure.service.com` (note HTTP, not HTTPS!)
- You click it since everything looks fine and the domain is correct, not noticing that the "s" is missing.
- They read your traffic.
This is similar to attacks where `https://good.service.com` is proxied to `https://good.sorvace.com` (i.e., a similar looking domain), but can be more dangerous -- for example, the browser will send (non-SSL-only) cookies and the attacker can write cookies.
This header instructs browsers that they can never access the site over HTTP and must always use HTTPS, defusing this class of attack.
Test Plan:
- Configured HTTPS locally.
- Accessed site over HTTP (got application redirect) and HTTPS.
- Enabled HSTS.
- Accessed site over HTTPS (to set HSTS).
- Tore down HTTPS part of the server and tried to load the site over HTTP. Browser refused to load "http://" and automatically tried to load "https://". In another browser which had not received the "HSTS" header, loading over HTTP worked fine.
- Brought the HTTPS server back up, things worked fine.
- Turned off the HSTS config setting.
- Loaded a page (to set HSTS with expires 0, diabling it).
- Tore down the HTTPS part of the server again.
- Tried to load HTTP.
- Now it worked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4340
Differential Revision: https://secure.phabricator.com/D11820
Summary:
Ref T7185. These settings shouldn't be unlocked anywhere. Specifically:
- `reply-handler`: These are on the way out.
- `reply-handler-domain`: Also hopefully on the way out; locked because a compromised administrator account can redirect replies.
- `phabricator.cookie-prefix`: Not dangerous per se, but an admin could have a hard time fixing this if they changed it by accident since their session would become invalid immediately.
Test Plan: Browsed Config.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7185
Differential Revision: https://secure.phabricator.com/D11764
Summary:
Ref T7185. We currently have "locked", "masked", and "hidden" config.
However, "masked" does not really do anything. It was intended to mask values in DarkConsole, but Config got built out instead and "hidden" is strictly better in modern usage and protects against compromised administrator accounts. "hidden" implies "locked", so it's now strictly more powerful than just locked.
Remove "masked" and upgrade all "masked" config to "hidden". In particular, this hides some API keys and secret keys much more aggressively in Config, which is desirable.
Test Plan: Browsed things like S3 API keys in config and could no longer see them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7185
Differential Revision: https://secure.phabricator.com/D11763
Summary: Pretty sure this was me derping, not trying to make a joke.
Test Plan: New text makes sense.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11762
Summary: Fixes T7088. Mainly this updates the documentation but I also snuck in tweaking how the domain reply handler is built. This does two main things -- makes the behavior consistent as some applications who didn't override this behavior would send out emails with reply tos AND makes it easier for us to deprecate the custom domain thing on a per application basis, which is just silly. On that note, the main documentation doesn't get into how this can be overridden, though I left in that mini blurb on the config setting itself. We could deprecate this harder and LOCK things if you want as well.
Test Plan: read docs, looked good. reasoned through re-factor
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7088
Differential Revision: https://secure.phabricator.com/D11725
Summary:
Ref T7152. Ref T1139. This updates Phabricator so third-party libraries can translate their own stuff. Also:
- Hide "All Caps" when not in development mode, since some users have found this a little confusing.
- With other changes, adds a "Raw Strings" mode (development mode only).
- Add an example silly translation to make sure the serious business flag works.
- Add a basic British English translation.
- Simplify handling of translation overrides.
Test Plan:
- Flipped serious business / development on and off and saw silly/development translations drop off.
- Switched to "All Caps" and saw all caps.
- Switched to Very English, Wow!
- Switched to British english and saw "colour".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7152, T1139
Differential Revision: https://secure.phabricator.com/D11747
Summary:
Ref T7184. I managed to write a phantom setup issue which fails normally and succeeds when looked at carefully, so clicking "you have open issues..." always cleared them. This made it very difficult to figure out what the problem was.
Show issue keys in the "title" attribute to make this sort of thing easier to deal with.
Test Plan: Moused over "You have issues..." text, saw issue key, quickly fixed issue with new information.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7184
Differential Revision: https://secure.phabricator.com/D11743
Summary: Groups setup issues into Important, PHP, MySQL, and Base for easier parsing on initial installations.
Test Plan:
Test my internal server and various issues.
{F289699}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T7207
Differential Revision: https://secure.phabricator.com/D11726
Summary: Adds core and apps grouping to configuration options, makes it somewhat easier to browse config options.
Test Plan: Set each option, review list. Breakdown is nearly 50/50 apps/core.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11722
Summary:
I'm hitting this in the cluster and couldn't figure it out after staring at it for a couple minutes. Produce a better error.
This dumps a hash of each configuration key value which is set to a non-default value into the daemon log. This is much more compact than the full config, and doesn't spread secrets around, so it seems like a good balance between providing information and going crazy with it.
Test Plan: {F284139}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11699
Summary:
Fixes T2380. Fixes T2382. Users should really configure this, but when we had a warning before a lot of users had trouble with it.
- Tout performance benefits.
- Document easy setup via CDN.
- We have an "Ignore" button now for users who really don't care.
Test Plan:
- Set up `admin.phacility.com` through AWS CloudFront (need a few changes to handle instances to put it on the cluster in general).
- Set up `secure.phabricator.com` through CloudFlare (almost; waiting for DNS).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: chad, epriestley
Maniphest Tasks: T2382, T2380
Differential Revision: https://secure.phabricator.com/D11649
Summary: Minor, adds border, reduces greys, etc.
Test Plan:
View a number of config issues, see new colors.
{F282035}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11650
Summary: This sets an icon for each config, makes it easier to scan.
Test Plan:
Reload Config page, see all new icons
{F281089}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11619
Summary: Clean up the error view styling.
Test Plan:
Tested as many as I could find, built additional tests in UIExamples
{F280452}
{F280453}
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11605
Summary:
Hit this locally, with an error like:
> Version <empty string> is older than 1.9, the minimum supported version.
(Where `<empty string>` was just the empty string, not literally the text `<empty string>`.)
Be more careful about parsing versions, and parse the newer string.
Test Plan: Got "unknown version" with intentionally-broken test data, then clean readout.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D11558
Summary: Fixes T7034. Like HTTP, proxy requests to the correct host if a repository has an Almanac service host.
Test Plan: Ran VCS requests through the proxy.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7034
Differential Revision: https://secure.phabricator.com/D11543
Summary: Add a setBorder call to CrumbsView to be more deliberate when a border is drawn. Could not find any CSS hacks to set it conditionally CSS.
Test Plan: Browsed every application that called crumbs and make a design decision. Also fixed a few bad layouts.
Reviewers: btrahan, epriestley
Reviewed By: btrahan
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11533
Summary:
Fixes T7019. In a cluster environment, pushes currently fail because the commit hook can't identify the instance.
For web processes, the hostname identifies the instance -- but we don't have a hostname in the hook.
For CLI processes, the environment identifies the instance -- but we don't have an environment in the hook under SVN.
Promote the instance identifier into the upstream and pack/unpack it explicitly for hooks. This is probably not useful for anyone but us, but the amount of special-purpose code we're introducing is very small.
I poked at trying to do this in a more general way, but:
- We MUST know this BEFORE we run code, so the normal subclassing stuff is useless.
- I couldn't come up with any other parameter which might ever be useful to pass in.
Test Plan: Used `git push` to push code through proxied HTTP, got a clean push.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T7019
Differential Revision: https://secure.phabricator.com/D11495
Summary: Adds in the sidenav
Test Plan: Click on sidenav, see it persist
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11526
Summary: Select a similar or better FontAwesome icon to represent each application
Test Plan: Visual inspection
Reviewers: epriestley, btrahan
Subscribers: hach-que, Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D11489
Summary: Ref T6822. This method needs to be `public` because it is called from `PhabricatorApplicationSearchController::buildApplicationMenu()`.
Test Plan: I wouldn't expect //increasing// method visibility to break anything.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11416
Summary: Fixes T6959.
Test Plan: When I was ready to test the feature, the "Daemon & Web config" error already showed up, from having added phd.variant-config. I went meta and changed the value of phd.variant-config to have phd.variant-config. The config error disappeared. I then changed the conpherence setting about conpherence email prefix and the error showed up again. Removing the conpherence config setting made the error disappear once more.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6959
Differential Revision: https://secure.phabricator.com/D11399
Summary: Fixes T6923. Turns out we can't use the editor since we don't have a user with a phid (just some omnipotent guy).
Test Plan: ./bin/config set --database syntax.filemap '{}'; ./bin/config delete --database syntax.filemap
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6923
Differential Revision: https://secure.phabricator.com/D11301
Summary:
Fixes T6559. No more flash, use Websockets. This is less aggressive than the earlier version, and retains more server logic.
- Support "wss".
- Make the client work.
- Remove "notification.user" entirely.
- Seems ok?
Test Plan:
In Safari, Firefox and Chrome, saw the browsers connect. Made a bunch of comments/updates and saw notifications.
Notable holes in the test plan:
- Haven't tested "wss" yet. I'll do this on secure.
- Notifications are //too fast// now, locally. I get them after I hit submit but before the page reloads.
- There are probably some other rough edges, this is a fairly big patch.
Reviewers: joshuaspence, btrahan
Reviewed By: joshuaspence, btrahan
Subscribers: fabe, btrahan, epriestley
Maniphest Tasks: T6713, T6559
Differential Revision: https://secure.phabricator.com/D11143
Summary: Ref T6822.
Test Plan: Visual inspection. These methods are only called from within `PhabricatorController` subclasses.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11241
Summary: Ref T6822.
Test Plan: Visual inspection. These methods are only called from within the `PhabricatorConfigStorageSchema` class.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6822
Differential Revision: https://secure.phabricator.com/D11247
Summary:
Ref T2783. Ref T6706.
- Add `cluster.addresses`. This is a whitelist of CIDR blocks which define cluster hosts.
- When we recieve a request that has a cluster-based authentication token, require the cluster to be configured and require the remote address to be a cluster member before we accept it.
- This provides a general layer of security for these mechanisms.
- In particular, it means they do not work by default on unconfigured hosts.
- When cluster addresses are configured, and we receive a request //to// an address not on the list, reject it.
- This provides a general layer of security for getting the Ops side of cluster configuration correct.
- If cluster nodes have public IPs and are listening on them, we'll reject requests.
- Basically, this means that any requests which bypass the LB get rejected.
Test Plan:
- With addresses not configured, tried to make requests; rejected for using a cluster auth mechanism.
- With addresses configred wrong, tried to make requests; rejected for sending from (or to) an address outside of the cluster.
- With addresses configured correctly, made valid requests.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6706, T2783
Differential Revision: https://secure.phabricator.com/D11159
Summary:
Fixes T6692. Addresses two main issues:
- The write guard would sometimes not get disposed of on exception pathways, generating an unnecessary secondary error which was just a symptom of the original root error.
- This was generally confusing and reduced the quality of reports we received because users would report the symptomatic error sometimes instead of the real error.
- Instead, reflow the handling so that we always dispose of the write guard if we create one.
- If we missed the Controller-level error page generation (normally, a nice page with full CSS, etc), we'd jump straight to Startup-level error page generation (very basic plain text).
- A large class of errors occur too early or too late to be handled by Controller-level pages, but many of these errors are not fundamental, and the plain text page is excessively severe.
- Provide a mid-level simple HTML error page for errors which can't get full CSS, but also aren't so fundamental that we have no recourse but plain text.
Test Plan:
Mid-level errors now produce an intentional-looking error page:
{F259885}
Verified that setup errors still render properly.
@chad, feel free to tweak the exception page -- I just did a rough pass on it. Like the setup error stuff, it doesn't have Celerity, so we can't use `{$colors}` and no other CSS will be loaded.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, chad
Maniphest Tasks: T6692
Differential Revision: https://secure.phabricator.com/D11126
Summary:
Removes an unused PhabricatorFeedStory Parameter from all getTitleForFeed() and getApplicationTransactionTitleForFeed() functions.
Ref D11088 Ref T6545
Test Plan: ran all unit tests and viewed some dashboard feeds
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6545
Differential Revision: https://secure.phabricator.com/D11146
Summary:
Shows a timeline of all modified settings Fixes T6545
Will show all settings (no pagination, should be not so difficult to add if needed but most installs won't have hundreds of settings changes)
I'm not happy by how the PhabricatorConfigTransaction object is instructed to render the config keys but i don't see any other reasonable way.
We could always show the keys though.
Test Plan: Changed settings and called the history page
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6545
Differential Revision: https://secure.phabricator.com/D11088
Summary:
Ref T2783. When repository services are defined, skip the check for local repository storage.
In particular, in the Phacility cluster, this path won't exist on web nodes, but nothing will ever try to access it.
Test Plan: Verified new branch gets hit with cluster services defined.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2783
Differential Revision: https://secure.phabricator.com/D11100
Summary:
Fixes T5196
If no phd.user is configured the behaviour is unchanged besides printing a warning when run as root (Usually i would add an exit(1) here but that would break existing installs who do that).
If phd.user is set and the current user is root it will run the daemon as: su USER -c "command" (I'm not sure if this works for every platform needed)
Otherwise it will refuse to start if configured and current user mismatch.
Test Plan: Stopped & Started phd daemon with various users and different phd.user settings including root
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: vinzent, epriestley
Maniphest Tasks: T5196
Differential Revision: https://secure.phabricator.com/D11036
Summary:
When the index does not exist and auto_create_index isn't
enabled, running ./bin/index results in a failure. That's
T5990
Instead create an index properly. This also allows us to do
nice things like do a proper mapping and analysis like for
substring matching like outlined by @fabe in T6552.
Test Plan:
Deleted and created index multiple times to verify
proper index creation and usage.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, manybubbles, chasemp, fabe, epriestley
Differential Revision: https://secure.phabricator.com/D10955
Summary: Ref: T6747 add a setup warning if mysql is configured with the default boolean syntax
Test Plan: Run setup checks with default mysql config and then add the desired config option, restart and check again.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T6747
Differential Revision: https://secure.phabricator.com/D11030
Summary:
Two goals:
- If an attacker compromises an administrator account (without compromising the host itself), they can currently take advantage of vulnerabilities in prototype applications by enabling the applications, then exploiting the vulnerability. Locking this option requires CLI access to enable prototypes, so installs which do not have prototypes enabled have no exposure to security issues in prototype applications.
- Making this very slightly harder to enable is probably a good thing, given the state of the world and support.
Test Plan: Verified that web UI shows the value is locked and instructs the user to update via the CLI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10993
Summary: Fixes T6693.
Test Plan:
Made a bunch of comments on a diff with differential, being sure to leave inlines here and there. This reproduced the issue in T6693. With this patch this issue no longer reproduces!
Successfully "showed older changes" in Maniphest too.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6693
Differential Revision: https://secure.phabricator.com/D10931
Summary: Ref T4712. These are a bit time consuming to test so might as well send off a batch now and again.
Test Plan: foreach impacted controller, made sure the timeline rendered as it did before. for project column and config, noted the "should terminate" UI was also rendered unlike before.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T4712
Differential Revision: https://secure.phabricator.com/D10923
Summary: Ref T1217, Add link to email preferences to email template
Test Plan: Add comment to object like Maniphest task, check that email has a footer with a link to email preferences.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T1217
Differential Revision: https://secure.phabricator.com/D10883
Summary: Fixes T6243.
Test Plan: simulated having this on by adding 'ONLY_FULL_GROUP_BY' to the $modes array. verified the error message looked nice {F233954}.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6243
Differential Revision: https://secure.phabricator.com/D10856
Summary: Fixes T3046. Git has no minimum or bad versions; svn has no minimum and the bad version of 1.7.1, and mercurial has a minimum of 1.9 and bad versions 2.2 and 2.1. These error messages are specific about the problem but do not include the details as to what specifically is bad about a given version. I don't think that's really necessary - the details don't help solve the problem and its probably booooooring at best to the average user. The details about a bad version are included in the code however.
Test Plan: hardcoded a VCS array to let me test all the VCS stuff. added some phlog() calls to make sure the VCS version parsing stuff was working correctly relative to the version(s) on my system. played around with setting minimum versions and bad versions and saw good results depending on what I set.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T3046
Differential Revision: https://secure.phabricator.com/D10852
Summary: Fixes T6175. This particular option is only editable via the Applications application so let the user know that.
Test Plan: saw error message and clicked through to applications app. tried another locked option and saw old message
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T6175
Differential Revision: https://secure.phabricator.com/D10841
Summary: i think way back in D10490 I didn't incorporate feedback correctly. make this code right as it fatals in this codepath as is. Fixes T6508.
Test Plan: @joshuaspence to the rescue (I remain unable to test this effectively with my baby-clean installation.)
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley, joshuaspence
Maniphest Tasks: T6508
Differential Revision: https://secure.phabricator.com/D10833
Summary:
Ref T1191. Currently if a developer forgot to specify a column type, `storage adjust` aborts explosively mid-stream. Instead:
- Make this a formal error with an unambiugous name/description instead of something you sort of infer by seeing "<unknown>".
- Make this error prevent generation of adjustment warnings, so we don't try to `ALTER TABLE t CHANGE COLUMN c <unknown>`, which is nonsense.
- When schemata errors exist, surface them prominiently in `storage adjust`.
Overall:
- Once `storage upgrade` runs `storage adjust` automatically (soon), this will make it relatively difficult to miss these errors.
- Letting these errors slip through no longer escalates into a more severe issue.
Test Plan:
Commented out the recent `mailKey` spec and ran `storage adjust`:
```
$ ./bin/storage adjust --force
Verifying database schemata...
Found no adjustments for schemata.
Target Error
phabricator2_phriction.phriction_document.mailKey Column Has No Specification
SCHEMATA ERRORS
The schemata have serious errors (detailed above) which the adjustment
workflow can not fix.
If you are not developing Phabricator itself, report this issue to the
upstream.
If you are developing Phabricator, these errors usually indicate that your
schema specifications do not agree with the schemata your code actually
builds.
```
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10771
Summary: Fixes T6436. We subclass the wrong controller and miss the admin-only check.
Test Plan: Ignored / unignored set up issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6436
Differential Revision: https://secure.phabricator.com/D10765
Summary:
Ref T1191. Notable stuff:
- Adds `--disable-utf8mb4` to `bin/storage` to make it easier to test what things will (approximately) do on old MySQL. This isn't 100% perfect but should catch all the major stuff. It basically makes us pretend the server is an old server.
- Require utf8mb4 to dump a quickstart.
- Fix some issues with quickstart generation, notably special casing the FULLTEXT handling.
- Add an `--unsafe` flag to `bin/storage adjust` to let it truncate data to fix schemata.
- Fix some old patches which don't work if the default table charset is utf8mb4.
Test Plan:
- Dumped a quickstart.
- Loaded the quickstart with utf8mb4.
- Loaded the quickstart with `--disable-utf8mb4` (verified that we get binary columns, etc).
- Adjusted schema with `--disable-utf8mb4` (got a long adjustment with binary columns, some truncation stuff with weird edge case test data).
- Adjusted schema with `--disable-utf8mb4 --unsafe` (got truncations and clean adjust).
- Adjusted schema back without `--disable-utf8mb4` (got a long adjustment with utf8mb4 columns, some invalid data on truncated utf8).
- Adjusted schema without `--disable-utf8mb4`, but with `--unsafe` (got truncations on the invalid data).
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10757
Summary: Fixes T4018. Basically hits the bullet points in that task description except the "ideally" one.
Test Plan:
ran bin/config migrate and saw sensible output.
```
~> ./bin/config migrate
Migrating file-based config to more modern config...
Skipping config of source type PhabricatorConfigDatabaseSource...
Skipping config of source type PhabricatorConfigLocalSource...
Skipping config of source type PhabricatorConfigDefaultSource...
Done. Migrated 0 keys.
```
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T4018
Differential Revision: https://secure.phabricator.com/D10490
Summary: Fixes T6119. This is a little fuzzy, but generally bumping up `innodb_buffer_pool_size` to something bigger than the default (which is often anemic, at `8M`) is desriable, and it seems like it will fix the specific issue a user encountered in T6119.
Test Plan: {F211855}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6119
Differential Revision: https://secure.phabricator.com/D10630
Summary:
Ref T1191. Although I fixed some of the mutations earlier (in D10598), I missed the column mutations under old versions of MySQL. In particular, this isn't valid:
- `ALTER TABLE ... MODIFY columnName VARCHAR(64) COLLATE binary`
Issue the permitted version of this instead, which is:
- `ALTER TABLE ... MODIFY columnName VARBINARY(64)`
Also fixed an issue where a clean schema had the wrong nullability for a column in the draft table. Force it to the expected nullability.
The other trick here is around the one column with a FULLTEXT index on it, which needs a little massaging.
Test Plan:
- Forced my local install to return `false` for utf8mb4 support.
- Did a clean adjust into `binary` columns.
- Poked around, added emoji to things.
- Reverted the fake check and did a clean adjust into `utf8mb4` columns.
- Emoji survived.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: fabe, epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10627
Summary:
Ref T1191. Now that the whole database is covered, we don't need to do as much work to build expected schemata. Doing them database-by-database was helpful in converting, but is just reudndant work now.
Instead of requiring every application to build its Lisk objects, just build all Lisk objects.
I removed `harbormaster.lisk_counter` because it is unused.
It would be nice to autogenerate edge schemata, too, but that's a little trickier.
Test Plan: Database setup issues are all green.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10620
Summary: Fixes T6210. The current messaging may be confusing if `pygmentize` is available but broken.
Test Plan: Faked the binary names and hit the errors, which seemed helpful.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6210
Differential Revision: https://secure.phabricator.com/D10626
Summary:
Ref T1191. When changing the column type of an AUTO_INCREMENT column, we currently may lose the autoincrement attribute.
Instead, support it. This is a bit messy because AUTO_INCREMENT columns interact with PRIMARY KEY columns (tables may only have one AUTO_INCREMENT column, and it must be a primary key). We need to migrate in more phases to avoid this issue.
Introduce new `auto` and `auto64` types to represent autoincrement IDs.
Test Plan:
- Saw autoincrement show up correctly in web UI.
- Fixed an autoincrement issue on the XHProf storage table with `bin/storage adjust` safely.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10607
Summary:
Ref T1191. Currently, the `quickstart.sql` gets generated in a pretty manual fashion. This is a pain, and will become more of a pain in the world of utf8mb4.
Provide a workflow which does upgrade + adjust + dump + destroy, then massages the output to produce a workable `quickstart.sql`.
Test Plan: Inspected output; I'll test this more throughly before actually generating a new quickstart, but that's some ways away.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10603
Summary:
Ref T1191. For most text columns, we either don't care if "a" and "A" are the same, or we expect them to be different (for example: keys, domains, secrets, etc). Default text columns to the `_bin` collation so they are compared by strict character value. This is safer in cases where we aren't sure.
For some text columns, we allow the user to sort by the column in the UI (like Maniphest task titles) or we do care that "A" and "a" are the same (for example: project names). Introduce a new class of virtual data types, the "sort..." types, to cover these columns. These are like the "text..." types but use sorting collations which treat "A" and "a" the same.
Test Plan:
- Made an effort to identify all columns where the UI relies on database collation.
- Ran `bin/storage adjust` and cleared all warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: beng, epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10602
Summary:
Ref T1191. This was useful for annotating everything but we no longer need it; there are just two types of issues now:
- Error: stuff we can't fix (missing or surplus tables/database/columns, bad column nullability).
- Warning: stuff we can fix (column types, character sets, collations, missing or surplus keys, incorrectly defined keys, bad key uniqueness).
Test Plan: Saw 3,399 warnings and 0 errors.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10594
Summary:
Ref T1191. Ref T6203. While generating expected schemata, I ran into these columns which seem to have sketchy nullability.
- Mark most of them for later resolution (T6203). They work fine today and don't need to block T1191. Changing them can break the application, so we can't autofix them.
- Forgive a couple of them that are sort-of reasonable or going to get wiped out.
Test Plan: Saw 94 remaining warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: hach-que, epriestley
Maniphest Tasks: T1191, T6203
Differential Revision: https://secure.phabricator.com/D10593
Summary:
Ref T1191. We have several keys on `<x, y, id>`. When `id` is an auto-increment primary key, I believe this is exactly equivalent to a key on `<x, y>`, because the leaf nodes are implicitly sorted by `id`. We omit the implicit `id` elsewhere.
It would be nice to drop the `id` bit for consistency, but it's not doing any harm and this doesn't need to block the primary work of T1191.
Test Plan: Saw slightly fewer warnings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10592
Summary:
Ref T1191.
- Adds definitions for missing keys and keys with wrong uniqueness. Generally, I defined these before fixing the key query to actually pull all keys and support uniqueness.
- Moves "key uniqueness" to note severity; this is fixable (probably?) and there are no remaining issues.
- Moves "Missing Key" to note severity; missing keys are fixable and all remaining missing keys are really missing (either missing edge keys, or missing PHID keys):
{F210089}
- Moves "Surplus Key" to note seveirty; surplus keys are fixable all remaining surplus keys are really surplus (duplicate key in Harbormaster, key on unused column in Worker):
{F210090}
Test Plan:
- Vetted missing/surplus/unique messages.
- 146 issues remaining.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10590
Summary:
Ref T1191. Nothing too notable here:
- Allow a Lisk object to specify that there's no expectation that a table exists. We have one Harbormaster object and one Token object like this.
- Removed BuildPlanTransactionComment because it's currently unused.
Test Plan:
- Saw ~200 fewer warnings; just ~800 left.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10583
Summary:
Ref T1191.
- Removes ponder comment table. This was migrated a very long time ago.
Test Plan:
- Grepped for removed table.
- Saw ~100 fewer issues in web UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10582
Summary:
Ref T1191. Notes:
- Drops the project affiliation table. This is a very old membership table which was migrated to edges.
- Drops the subproject table. This is a very old table for a removed feature.
Test Plan:
- Grepped for dropped tables.
- Saw ~100 fewer setup issues.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10581
Summary:
Ref T1191. Some notes here:
- Drops the old LDAP and OAuth info tables. These were migrated to the ExternalAccount table a very long time ago.
- Separates surplus/missing keys from other types of surplus/missing things. In the long run, my plan is to have only two notice levels:
- Error: something we can't fix (missing database, table, or column; overlong key).
- Warning: something we can fix (surplus anything, missing key, bad column type, bad key columns, bad uniqueness, bad collation or charset).
- For now, retaining three levels is helpful in generating all the expected scheamta.
Test Plan:
- Saw ~200 issues resolve, leaving ~1,300.
- Grepped for removed tables.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10580
Summary: Ref T6185. Although it seems that we can't easily defuse or mitigate this, we can at least warn administrators.
Test Plan: Ran on my (unpatched, local) system, got a setup warning.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6185
Differential Revision: https://secure.phabricator.com/D10561
Summary: Ref T1191. Handful of minor things here (T6150, T6149, T6148, T6147, T6146) but nothing very noteworthy.
Test Plan: Viewed web UI, saw fewer errors.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10527
Summary:
Ref T1191.
- Adds support for custom fields.
- Adds support for partial indexes (indexes on a prefix of a column).
- Drops old auxiliary storage table: this was moved to custom field storage about a year ago.
- Drops old project table: this was moved to edges about two months ago.
Test Plan:
- Viewed web UI, saw fewer issues.
- Used `grep` to verify no readers/writers for storage or project table.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10526
Summary:
Ref T1191. Three parts:
- The old way of getting key information only got primary / unique / foreign keys, not all keys. Use `SHOW INDEXES` to get all keys instead.
- Track key uniqueness and raise warnings about it.
- Add a new "all issues" view to show an expanded, flat view of all issues. This is just an easier way to get a list so you don't have to dig around in the hierarchical view.
Test Plan:
{F206351}
{F206352}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10525
Summary:
Ref T1191.
- There was a varchar(50) column. I changed it to `text64`, since this length is unusual.
- There was an int(3) column. I changed it to `int32`, since this length is unusual.
Test Plan: Ran migrations, saw warnings disappear from config tool.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10524
Summary: T1191. Nothing very notable here.
Test Plan: Saw more blue in web UI.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10522
Summary:
Ref T1191. Notable:
- Allowed objects to remove default columns (some feed tables have no `id`).
- Added a "note" severity and moved all the charset stuff down to that to make progress more clear.
Test Plan:
Trying to make the whole thing blue...
{F205970}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10519
Summary: Ref T1191. Fills in some more of the databases. Nothing very notable here. I didn't encounter any issues or overlong keys.
Test Plan: Used web UI to click around and verify expected schemata match up against actual schemata well.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10516
Summary: Ref T1191. This fills in some more features and gets audit and auth nearly generating reasonable expected schemata.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10500
Summary:
Ref T1191. The major issue motivation here is that InnoDB keys have a maximum length of 767 bytes. When we move `utf8` colums to `utf8mb4` columns, they'll jump from 3 bytes per character to 4 bytes per character, which may make some indexes too long. Add key schema to help spot this.
Also add nullability since it doesn't hurt.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10499
Summary:
Ref T1191. This lays some groundwork for generating the expected schemata, so we can compare them to the actual schemata and produce a meaningful diff.
- In general, each application will subclass `PhabricatorConfigSchemaSpec` and provide a definition of the tables it expects.
- This class has helper methods to mostly-automatically build table definitions for Lisk and (in the future) edges.
- When building expected schema, we specify a "data type", like "epoch". This is the type of data the application stores in the column, from the application's point of view. The SchemaSpec converts this into the best avilable storage type: for example, "text" will translate to `utf8mb4` if it's availalbe, or `binary` if not. This gives us a layer of indirection to insulate us from craziness.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10497
Summary:
Ref T1191. This builds on the "view of the database as it exists" by building a view of the database as it is expected to exist (this is mostly empty for now) and comparing the two. We now render a view of the "comparison schema", which is the actual schema merged with the expected schema and annotated with the differences.
(I'm merging them like this because it makes it easier to handle both "missing" and "surpulus" warnings in a consistent way. If we tried to annotate just the actual or expected schema, the absence of components which are expected to exist is messy to handle.)
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10496
Summary:
Ref T1191. Plan here is:
- Build a tool showing the current schemata status (this diff).
- Have it compare the current status to the desired status (partly here, mostly in future diffs).
- Then add a migration tool, and eventually a setup issue to tell people to run it.
Test Plan:
Reviewed current schemata.
{F204492}
{F204493}
{F204494}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1191
Differential Revision: https://secure.phabricator.com/D10494
Summary: See rP8806fb0296c2.
Test Plan:
me fail english
with bonus!
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D10514
Summary:
Fixes T6084. Changes:
- Rename `phabricator.show-beta-applications` to `phabricator.show-prototypes`, to reinforce that these include early-development applications.
- Migrate the config setting.
- Add an explicit "no support" banner to the config page.
- Rename "Beta" to "Prototype" in the UI.
- Use "bomb" icon instead of "half star" icon.
- Document prototype applications in more detail.
- Explicitly document that we do not support these applications.
Test Plan:
- Ran migration.
- Resolved "obsolete config" issue.
- Viewed config setting.
- Browsed prototypes in Applications app.
- Viewed documentation.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley, hach-que
Maniphest Tasks: T6084
Differential Revision: https://secure.phabricator.com/D10493
Summary:
Fixes T6044. We've had two cases (both the same install, coincidentally) where pages got hung doing too much data fetching.
When pages hang, we don't get a useful stack trace out of them, since nginx, php-fpm, or PHP eventually terminates things in a non-useful way without any diagnostic information.
The second time (the recent Macros issue) I was able to walk the install through removing limits on nginx, php-fpm, php, and eventually getting a profile by letting the page run for several minutes until the request completed. However, this install is exceptionally technically proficient and this was still a big pain for everyone, and this approach would not have worked if the page actually looped rather than just taking a long time.
Provide `debug.time-limit`, which should give us a better tool for reacting to this situation: by setting it to a small value (like 10), we'll kill the page after 10 seconds with a trace, before nginx/php-fpm/php/etc can kill it uselessly. Hopefully that will be enough information to find the issue (generally, getting a trace has been 95% of the problem in the two cases we've encountered).
Test Plan: Set this option to `3` and added a sleep loop, saw a termination after 3 seconds with a useful trace.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: csilvers, joshuaspence, epriestley
Maniphest Tasks: T6044
Differential Revision: https://secure.phabricator.com/D10465
Summary: Fixes T6052. Allow installs to link to legal documents, etc., in the page footer.
Test Plan:
- Configured a footer.
- Viewed workboards (no footer).
- Viewed Conpherence (no apparent disruption, I think everything z-indexes over the footer).
- Viewed stuff on mobile (seems OK).
- Viewed login page (saw footer).
{F201718}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T6052
Differential Revision: https://secure.phabricator.com/D10466
Summary:
Ref T5968. Issues we've seen from users include:
- Concern about severity ("... Need Restarting").
- Reduce severity of explanatory text ("Different Config", "not severe").
- Explain consequences in more detail.
- In D10420, make "Ignore" easier to find.
- Scope language for the multi-machine case ("at least one daemon").
- Confusion about why daemons need restarting.
- Unbury the lede ("Daemons and Web Have Different Config").
- Make it clear that the root cause is a different checksum by showing the checksum. (This just hammers home that we're comparing checksums and this issue is about config checksums and we're not making it up, the checksums probably aren't that useful on their own.)
- Difficulty understanding how to proceed when restarting does not resolve the issue:
- Call out steps to take on the daemon console explicitly.
- Walk through troubleshooting PHABRICATOR_ENV.
- Walk through troubleshooting multiple `local.json`.
Test Plan: {F199245}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5968
Differential Revision: https://secure.phabricator.com/D10421
Summary:
Ref T4331. Ref T5968. Users sometimes have trouble figuring out how to ignore issues. The option is a bit hard to spot, especially if you aren't familiar with interfaces yet.
Make it a button on the issue page itself instead.
Test Plan:
Normal issue:
{F199225}
Ignored issue:
{F199226}
Fatal issue:
{F199227}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4331, T5968
Differential Revision: https://secure.phabricator.com/D10420
Summary: Fixes T6011. See that task for discussion. We can detect when `memory_limit` will be the limiting factor for drag-and-drop uploads and warn administrators about it.
Test Plan: Fiddled configuration values and hit, then resolved, the issue.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T6011
Differential Revision: https://secure.phabricator.com/D10413
Summary:
Fixes T5956. We changed the default mail encoding to `quoted-printable` to fix delivery via SendGrid via SMTP, but this broke multiple other mailers.
- Change the default back to 8bit (which works everywhere except SendGrid).
- Add a configuration setting for selecting `quoted-printable`.
- Document this issue.
- Discourage use of SendGrid in documentation.
(IMPORTANT) @klimek @nickz This reverts the `quoted-printable` fix for SendGrid. You will need to adjust your configurations (set `phpmailer.smtp-encoding` to `quoted-printable`) and restart your daemons or mail will get double newlines again.
Test Plan:
- Sent mail via SendGrid with various `phpmailer.smtp-encoding` settings, saw mail arrive with specified encoding.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: klimek, nickz, epriestley
Maniphest Tasks: T5956
Differential Revision: https://secure.phabricator.com/D10397
Summary: Shows the UI everywhere. Also asort() the keys before calculating the environment hash as that is probably an issue for someone at some point we just don't need to have. Ref T5968.
Test Plan: Viewed the setup check and saw a link to the daemon console. Viewed the daemon console and saw the various stale config daemons. Clicked a daemon and saw a "stale config" header icon where expected. Restarted daemons and all of this went away.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5968
Differential Revision: https://secure.phabricator.com/D10367
Summary: Fixes T2605. Provide some instructions on configuring RDS properly. The "DB Parameter Group" thing in the web UI seems pretty easy to use, it's just not obvious that it's what you should be using.
Test Plan: Jiggled these warnings to trigger them, viewed the output, saw a table of values and a hint about RDS.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2605
Differential Revision: https://secure.phabricator.com/D10343
Summary:
Ref T2605. For old MySQL, this option is not supported. Catch that and tailor the error.
I couldn't find the first version of MySQL which introduced this optino in order to produce a more useful error. I spent about ~10 minutes looking.
Test Plan: Faked the error, survived setup.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T2605
Differential Revision: https://secure.phabricator.com/D10342
Summary: Fixes T4881.
Test Plan: made a config change, saw the issue, restarted daemons and it went away
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T4881
Differential Revision: https://secure.phabricator.com/D10339
Summary:
Added support for side-by-side HTML and plaintext email building.
We can control if the HTML stuff is sent by by a new config, metamta.html-emails
Test Plan:
Been running this in our deployment for a few months now.
====Well behaved clients====
- Gmail
- Mail.app
====Bad clients====
- [[ http://airmailapp.com/ | Airmail ]]. They confuse Gmail too, though.
====Need testing====
- Outlook (Windows + Mac)
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: webframp, taoqiping, chad, epriestley, Korvin
Maniphest Tasks: T992
Differential Revision: https://secure.phabricator.com/D9375
Summary: Fixes T5453.
Test Plan: made a remarkup comment that "Q1 is dumb and Q10 is awesome" and only Q10 was linked. changed the new setting to have the value " " and the Q1 also started linking.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Maniphest Tasks: T5453
Differential Revision: https://secure.phabricator.com/D10270
Summary: Fixes T4130. Adds a setup warning when ft_min_word_len is set to the default value.
Test Plan: Hit setup warning; resovled setup warning. Searched for "DOS".
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4130
Differential Revision: https://secure.phabricator.com/D10259
Summary:
Fixes T2605.
- Add a setup warning about the stopword file.
- Provide a simpler stopword file.
Test Plan:
- Hit setup warning.
- Resolved it according to instructions.
- Added "various" to a task, then searched for it, found the task.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T2605
Differential Revision: https://secure.phabricator.com/D10258
Summary:
Ref T5861. Currently, mail tags are hard-coded; move them into applications. Each Editor defines its own tags.
This has zero impact on the UI or behavior.
Test Plan:
- Checked/unchecked some options, saved form.
- Swapped back to `master` and saw exactly the same values.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5861
Differential Revision: https://secure.phabricator.com/D10238
Summary: Ref T5655. Rename `PhabricatorPHIDType` subclasses for clarity (see discussion in D9839). I'm not too keen on some of the resulting class names, so feel free to suggest alternatives.
Test Plan: Ran unit tests.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin, hach-que
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9986
Summary: Provide an implementation for the `getName` method rather than automagically determining the application name.
Test Plan: Saw reasonable application names in the launcher.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D10027
Summary: Ref T5655. Some discussion in D9839. Generally speaking, `Phabricator{$name}Application` is clearer than `PhabricatorApplication{$name}`.
Test Plan:
# Pinned and uninstalled some applications.
# Applied patch and performed migrations.
# Verified that the pinned applications were still pinned and that the uninstalled applications were still uninstalled.
# Performed a sanity check on the database contents.
Reviewers: btrahan, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: hach-que, epriestley, Korvin
Maniphest Tasks: T5655
Differential Revision: https://secure.phabricator.com/D9982
Summary: Instead of implementing the `getTypeConstant` method in all subclasses of `PhabricatorPHIDType`, provide a `final` implementation in the base class which uses reflection. See D9837 for a similar implementation.
Test Plan: Ran `arc unit`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9985
Summary: Introduce a new configuration setting that by default disables the conduit as as user method. Wordily explain that turning it on is not recommended. Fixes T3818.
Test Plan:
```
15:25:19 ~/Dropbox/code/phalanx/src/applications/conduit (T3818)
~> echo '{}' | arc call-conduit --conduit-uri http://phalanx.dev/ user.whoami
Waiting for JSON parameters on stdin...
{"error":null,"errorMessage":null,"response":{"phid":"PHID-USER-tghb3b2gbdyezdcuw2or","userName":"btrahan","realName":"Bob Trahan","image":"http:\/\/phalanx.dev\/file\/data\/yncjbh7phk7ktrdhuorn\/PHID-FILE-qyf4ui3x2ll3e52hpg5e\/profile-profile-gravatar","uri":"http:\/\/phalanx.dev\/p\/btrahan\/","roles":["admin","verified","approved","activated"]}}
15:25:34 ~/Dropbox/code/phalanx/src/applications/conduit (T3818)
<go edit libconfig/conduitclient to spoof another user...>
~> echo '{}' | arc call-conduit --conduit-uri http://phalanx.dev/ user.whoami
Waiting for JSON parameters on stdin...
{"error":"ERR-CONDUIT-CORE","errorMessage":"ERR-CONDUIT-CORE: security.allow-conduit-act-as-user is disabled","response":null}
15:26:40 ~/Dropbox/code/phalanx/src/applications/conduit (T3818)
<enable option via bin/config....>
~> echo '{}' | arc call-conduit --conduit-uri http://phalanx.dev/ user.whoami
Waiting for JSON parameters on stdin...
{"error":null,"errorMessage":null,"response":{"phid":"PHID-USER-6lcglnzbkiamdofishgi","userName":"xerxes","realName":"Xerxes Trahan","image":"http:\/\/phalanx.dev\/file\/data\/n2kyeevowetcuynbcxrg\/PHID-FILE-voquikectzpde256zzvm\/profile-1275455993.jpg","uri":"http:\/\/phalanx.dev\/p\/xerxes\/","roles":["verified","approved","activated"]}}
```
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: jevripio, sowedance, epriestley, Korvin
Maniphest Tasks: T3818
Differential Revision: https://secure.phabricator.com/D9881
Summary:
Fixes T5545. We assume `strlen()` returns the number of bytes in a string, which is the normal behavior (and the documented behavior).
There's a config option, `mbstring.func_overload`, which silently calls mb_strlen() instead. This may return some other result, might fail, etc., and there's no way to get the byte length of a string if this option is set.
If this option is set, fatal immediately. Nothing good can ever come of it.
Test Plan: {F173990}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5545
Differential Revision: https://secure.phabricator.com/D9811
Summary: Doing to start to try to remove all the 'purple' PHUIHeaders around Phabricator and see what's left after.
Test Plan:
View each page
{F171007}
Reviewers: epriestley
Reviewed By: epriestley
Differential Revision: https://secure.phabricator.com/D9750
Summary: Moves PhabricatorActionHeaderView to PHUIActionHeaderView, adds Red, Green, and Violet colors and extend ObjectBox to take colors and action headers.
Test Plan:
Tested new Welcome layout as well as UIExamples, Workboards, and Hovercards
{F169669}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9707
Summary:
Ref T4883.
- When an administrator installs a dashbord, give them the option to install it as a global default.
- On the home page, if a user does not have a dashboard installed, check for a global default.
- On the Admin NUX/Welcome page, check for a global dashboard.
Test Plan:
- Installed a global dashboard, checked homepage, saw it.
- Installed a personal dashboard over it.
- Checked non-admin flow.
- Checked Admin NUX page for quest completion.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T4883
Differential Revision: https://secure.phabricator.com/D9670
Summary:
Ref T5317. General idea here is that Dashboards are replacing the home page soon. We think they'll do a good job for normal users, but they aren't very good for new administrators who have just completed an install. In this case, any dashboard we put there by default will be empty and not very useful or helpful. It's also technically a bit messy to build objects by default.
Instead, give new administrators a "Quest Tracker" UI to help them get through things. When they're done with setup steps, they build a dashboard and install it to replace the home page. They can add install-specific welcome messages during this process, so hopefully this will also ease onboarding for non-administrator users.
For now, you have to go to Config > Welcome Screen explicitly to see this UI. We can tweak/test it for a bit before replacing the home page.
Test Plan: {F169226}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5317
Differential Revision: https://secure.phabricator.com/D9660
Summary: Applied some more linter fixes that I previously missed because my global `arc` install was out-of-date.
Test Plan: Will run `arc unit` on another host.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9443
Summary: Ran `arc lint --apply-patches --everything` over rP, mainly to change double quotes to single quotes where appropriate. These changes also validate that the `ArcanistXHPASTLinter::LINT_DOUBLE_QUOTE` rule is working as expected.
Test Plan: Eyeballed it.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9431
Summary: This went smoother than expeced. Makes the rounded Card the default, also tweaked selected state a little.
Test Plan:
Test UIExamples, Maniphest, Home, Differential, Harbormaster, Audit. Everything seems normal
{F163971}
{F163973}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9408
Summary: Ref T5089. Adds a `security.require-multi-factor-auth` which forces all users to enroll in MFA before they can use their accounts.
Test Plan:
Config:
{F159750}
Roadblock:
{F159748}
After configuration:
{F159749}
- Required MFA, got roadblocked, added MFA, got unblocked.
- Removed MFA, got blocked again.
- Used `bin/auth strip` to strip MFA, got blocked.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T5089
Differential Revision: https://secure.phabricator.com/D9285
Summary:
This does some backend cleanup of the tile stuff, and some general cleanup of other application things:
- Users who haven't customized preferences get a small, specific set of pinned applications: Differential, Maniphest, Diffusion, Audit, Phriction, Projects (and, for administrators, Auth, Config and People).
- Old tile size methods are replaced with `isPinnnedByDefault()`.
- Shortened some short descriptions.
- `shouldAppearInLaunchView()` replaced by less ambiguous `isLaunchable()`.
- Added a marker for third-party / extension applications.
Test Plan: Faked away my preferences and viewed the home page, saw a smaller set of default pins.
Reviewers: chad
Reviewed By: chad
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9358
Summary:
This probably needs some tweaks, but the idea is to make it easier to browse and access applications without necessarily needing them to be on the homepage.
Open to feedback.
Test Plan:
(This screenshot merges "Organization", "Communication" and "Core" into a single "Core" group. We can't actually do this yet because it wrecks the homepage.)
{F160052}
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: epriestley
Maniphest Tasks: T5176
Differential Revision: https://secure.phabricator.com/D9297
Summary: I could just add these options to my local configuration, but I figured I'd submit these upstream since they are (in my opinion) fairly common file formats.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9319
Summary: After T2039, it makes sense to syntax highlight `.arclint` files as JSON.
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D9305
Summary: Did a more exhaustive grep on setIcon and found 99.9% of the icons.
Test Plan: I verified icon names on UIExamples, but unable to test some of the more complex flows visually. Mostly a read and replace.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin, hach-que
Differential Revision: https://secure.phabricator.com/D9088
Summary: This doesn't look like it is spelled correctly.
Test Plan: Seems more correct now.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D9043
Summary:
Provides a working SMS implementation with support for Twilio.
This version doesn't really retry if we get any gruff at all. Future versions should retry.
Test Plan: used bin/sms to send messages and look at them.
Reviewers: chad, epriestley
Reviewed By: epriestley
Subscribers: aurelijus, epriestley, Korvin
Maniphest Tasks: T920
Differential Revision: https://secure.phabricator.com/D8930
Summary: There was a typo.
Test Plan: Now there is no typo.
Reviewers: btrahan, chad
Reviewed By: chad
Subscribers: aran, epriestley
Differential Revision: https://secure.phabricator.com/D8995
Summary:
This is just a general review of config options, to reduce the amount of damage a rogue administrator (without host access) can do. In particular:
- Fix some typos.
- Lock down some options which would potentially let a rogue administrator do something sketchy.
- Most of the new locks relate to having them register a new service account, then redirect services to their account. This potentially allows them to read email.
- Lock down some general disk stuff, which could be troublesome in combination with other vulnerabilities.
Test Plan:
- Read through config options.
- Tried to think about how to do evil things with each one.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8928
Summary: Fixes T4916. Although every normal build of PHP has this in the core, at least one distribution which users could reasonably encounter does not.
Test Plan: Changed string to "ctypex", got setup warning. Changed to "ctype", got no warning.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4916
Differential Revision: https://secure.phabricator.com/D8896
Summary: Throwing this up for testing, swapped out all icons in timeline for their font equivelants. Used better icons where I could as well. We should feel free to use more / be fun with the icons when possible since there is no penalty anymore.
Test Plan: I browsed many, not all, timelines in my sandbox and in IE8. Some of these were just swagged, but I'm expecting we'll do more SB testing before landing.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8827
Summary: A small but appreciable number of users find flavor on buttons confusing. Remove this flavor. This retains flavor in headers, error messages, etc., which doesn't cause confusion.
Test Plan: Looked at a revision, task, paste, macro, etc.
Reviewers: chad, btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8812
Summary: I haven't been able to understand why this isn't set by default in production environments (since it is recommended to do so anyway).
Test Plan: N/A
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D8743
Summary:
Fixes T4773. For config settings of type `list<string>`, `set`, or `list<regex>`, the "defaults" table and "examples" aren't always in the same format you should actually use when changing the setting.
This is pretty confusing. Instead, always show the settings in the desired format. For example, if the user should enter a newline-separated list, show them a newline separated list.
Test Plan:
- Grepped for `list<string>`, `list<regex>`, and `'set'`; verified all the config had the right example format (most already did).
- Viewed config settings of various kinds, including custom settings.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T4773
Differential Revision: https://secure.phabricator.com/D8725
Summary: Fixes T1812. Moves the internal configuration into public space and documents it.
Test Plan:
- Tried to set it to some invalid stuff.
- Set it to various valid things.
- Browsed around, changed statuses, filtered statuses, viewed statuses, merged duplictes, examined transaction record, created tasks.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Maniphest Tasks: T1812
Differential Revision: https://secure.phabricator.com/D8585
Summary: This can be used to lock yourself out of an instance, so prevent web edits.
Test Plan: Loaded page, wasn't web-editable.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8572
Summary:
- Point them at the new Diviner.
- Make them a little less cumbersome to write.
Test Plan: Found almost all of these links in the UI and clicked them.
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8553
Summary:
This is the other half of D8548. Specifically, the attack here was to set your own editor link to `javascript\n:...` and then you could XSS yourself. This isn't a hugely damaging attack, but we can be more certain by adding a whitelist here.
We already whitelist linkable protocols in remarkup (`uri.allowed-protocols`) in general.
Test Plan:
Tried to set and use valid/invalid editor URIs.
{F130883}
{F130884}
Reviewers: btrahan
Reviewed By: btrahan
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D8551
Summary: Ref T2222. These no longer have an effect, and are obsoleted by `differential.fields`.
Test Plan: `grep`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8468
Summary:
A user reported this stack trace:
http://pastebin.com/6auGbZsE
...on this GitHub issue:
https://github.com/facebook/phabricator/issues/389#issuecomment-36612511
The problem is similar to the original report, but not identical. In this case, we're following a sequence of steps like:
- Run setup checks.
- Check for enabled providers, in order to raise "no providers configured yet" warning.
- Try to generate login/redirect URIs.
- Build the request.
- Set the default base URI.
- Run normal code.
Since we try to generate URIs before we provide a default, this fatals. Instead, don't try to build objects.
An alternative fix might be to try to set defaults earlier, but we depend on some config and on building the Request in order to be able to figure out if a request is HTTP or HTTPS right now. We could assume one, or guess, or use protocol-relative URIs (`///host.com`), but I think this fix is a little cleaner overall. If we keep hitting similar stuff, we could look into alternate fixes.
We could also set some kind of "setup mode" flag and make `getURI()` if it's called during setup mode to detect these during testing. I'd like to hit one more of these before doing that, though.
Test Plan: Reproduced the issue, applied the patch, verified this fixes it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D8395
Summary: Ref T2222. This will probably have some rough edges for a bit (e.g., weird cases I didn't remember or think of), but there's no change to the underlying data and we can easily revert if things get too messy.
Test Plan: Looked at a variety of revisions and saw sensible output.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D8361
Summary:
See D8308. Enabling STRICT_ALL_TABLES prevents this entire class of error, by fataling on truncation instead of truncating. We never want truncation; it is always bad and sometimes extremely bad.
We've recommended this mode for developer installs for a long time, and some users run with it enabled, so it's very unlikely to cause any issues (I've had it enabled locally for at least 6-8 months, I think).
Test Plan:
- Disabled mode.
- Saw warning.
- Enabled mode.
- No warning.
{F117040}
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran, arice
Differential Revision: https://secure.phabricator.com/D8309
Summary:
Ref T3886. Ref T418. For fields like "Summary" and "Test Plan" where changes can't be summarized in one line, allow CustomField to provide a "(Show Details)" link and render a diff.
Also consolidate some of the existing copy/paste, and simplify this featuer slightly now that we've move to dialogs.
Test Plan:
{F115918}
- Viewed "description"-style field changes in phlux, pholio, legalpad, maniphest, differential, ponder (questions), ponder (answers), and repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3886, T418
Differential Revision: https://secure.phabricator.com/D8284
Summary:
Ref T4420. Tokenizers currently operate in "preload" or "ondemand" modes. In the former mode, which is default, they'll try to load the entire result list when a page loads.
The theory here was that this would slightly improve the experience for small installs, and once they got big enough they could switch to "ondemand". In practice, several issues have arisen:
- We generally don't have a good mechanism for telling installs that they should tweak perf config -- `metamta.send-immediately` is the canonical example here. Some large installs are probably affected negatively by not knowing to change this setting, and having settings like this is generally annoying.
- We have way way too much config now.
- With the advent of ApplicationSearch, pages like Maniphest make many redundant loads to prefill sources like projects. Most of the time, this data is not used. It's far simpler to switch everything to ondemand than try to deal with this, and dealing with this would mean creating two very complex divergent pathways in the codebase for a mostly theoretical performance benefit which only impacts tiny installs.
- We've been using `tokenizer.ondemand` forever on `secure.phabricator.com` since we have many thousands of user accounts, and it doesn't seem sluggish and works properly.
Removing this config is an easy fix which makes the codebase simpler.
I've retained the ability to use preloaded sources, since they may make sense in some cases (in at least one case -- task priorities -- adding a static source pathway might make sense), and they're part of Javelin itself. However, the code will no longer ever go down that pathway.
Test Plan: Used `secure.phabricator.com` for years with this setting enabled.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4420
Differential Revision: https://secure.phabricator.com/D8232
Summary:
As you've suggested, I took the SendGrid code and massaged it until it played nice with Mailgun.
btw - unless I'm missing something, it appears that the SendGrid receiver lets you spoof emails (it performs no validation on the data received).
Test Plan: Opened a task with Mailgun. Felt great.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4326
Differential Revision: https://secure.phabricator.com/D7989
Summary:
From @chad. This setup link should open in a new window so you don't lose your context in resolving setup issues.
@chad, this was the only one I could find immediately, let me know if you remember seeing others that I missed.
Test Plan: Faked an error, clicked the link, got a new tab.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7991
Summary: Cookie-prefix should fix phabricator instances where x.com and x.y.com have conflicting cookie names
Test Plan: Pushed branch to dev.phab.example.com, logged into phab.example.com and into dev.phab.example.com.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7979
Summary:
Ref T4310. Fixes T3720. This change:
- Removes concurrent session limits. Instead, unused sessions are GC'd after a while.
- Collapses all existing "web-1", "web-2", etc., sessions into "web" sessions.
- Dramatically simplifies the code for establishing a session (like omg).
Test Plan: Ran migration, checked Sessions panel and database for sanity. Used existing session. Logged out, logged in. Ran Conduit commands.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4310, T3720
Differential Revision: https://secure.phabricator.com/D7978
Summary:
Ref T3857.
- Always send mail via daemons. This lets us get rid of this config, and is generally much more performant.
- After D7964, we warn if daemons aren't running.
Test Plan: Sent some mail.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7965
Summary:
Currently, we try to mostly-kind-of-work if daemons aren't running (for example, we send mail in-process). I want to stop doing this. A major motivator is that `metamta.send-immediately` is confusing for a lot of users and frequently the cause of performance problems. Increasingly, functionality of applications depends on the daemons (Harbormaster, Drydock, Nuance all require daemons to do anything at all). They're also fairly stable/robust/well-tested and no reasonable install should be running without them.
This will let us simplify or remove some flags (like `metamta.send-immediately`) and simplify some other processes like search indexing.
Test Plan: Stopped daemons, loaded warnings, saw daemon warning. Started daemons, reloade, no warning.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3857
Differential Revision: https://secure.phabricator.com/D7964
Summary: This removes the bulk of the "Form Errors" text, some variations likely exists. These are a bit redundant and space consuming. I'd also like to back ErrorView more into PHUIObjectBox.
Test Plan: Test out the forms, see errors without the text.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran, hach-que
Differential Revision: https://secure.phabricator.com/D7924
Summary: Ref T4222. This was used by Facebook while developing Releeph, but should no longer be necessary since Releeph is in the upstream. I can't get an answer out of Facebook about whether they still use it or not (see T4227), so nuke it. We're going to replace it with a more general mechanism (see T4222).
Test Plan: Regenerated celerity map. Browsed some pages, still got resources.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4222
Differential Revision: https://secure.phabricator.com/D7863
Summary:
Ref T2015. Not directly related to Drydock, but I've wanted to do this for a bit.
Introduce a common base class for all the workflows in the scripts in `bin/*`. This slightly reduces code duplication by moving `isExecutable()` to the base, but also provides `getViewer()`. This is a little nicer than `PhabricatorUser::getOmnipotentUser()` and gives us a layer of indirection if we ever want to introduce more general viewer mechanisms in scripts.
Test Plan: Lint; ran some of the scripts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7838
Summary: We currently have a lot of calls to `addCrumb(id(new PhabricatorCrumbView())->...)` which can be expressed much more simply with a convenience method. Nearly all crumbs are only textual.
Test Plan:
- This was mostly automated, then I cleaned up a few unusual sites manually.
- Bunch of grep / randomly clicking around.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7787
Summary:
These just got copy/pasted like crazy, the base class has the correct default implementation.
(I'm adding "H" for Herald Rules, which is why I was in this code.)
I also documented the existing prefixes at [[ Object Name Prefixes ]].
Test Plan: Verified base implementation. Typed some object names into the jump nav.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7785
Summary:
Ref T2230. When fully set up, we have up to three users who all need to write into the repositories:
- The webserver needs to write for HTTP receives.
- The SSH user needs to write for SSH receives.
- The daemons need to write for "git fetch", "git clone", etc.
These three users don't need to be different, but in practice they are often not likely to all be the same user. If for no other reason, making them all the same user requires you to "git clone httpd@host.com", and installs are likely to prefer "git clone git@host.com".
Using three different users also allows better privilege separation. Particularly, the daemon user can be the //only// user with write access to the repositories. The webserver and SSH user can accomplish their writes through `sudo`, with a whitelisted set of commands. This means that even if you compromise the `ssh` user, you need to find a way to escallate from there to the daemon user in order to, e.g., write arbitrary stuff into the repository or bypass commit hooks.
This lays some of the groundwork for a highly-separated configuration where the SSH and HTTP users have the fewest privileges possible and use `sudo` to interact with repositories. Some future work which might make sense:
- Make `bin/phd` respect this (require start as the right user, or as root and drop privileges, if this configuration is set).
- Execute all `git/hg/svn` commands via sudo?
Users aren't expected to configure this yet so I haven't written any documentation.
Test Plan:
Added an SSH user ("dweller") and gave it sudo by adding this to `/etc/sudoers`:
dweller ALL=(epriestley) SETENV: NOPASSWD: /usr/bin/git-upload-pack, /usr/bin/git-receive-pack
Then I ran git pushes and pulls over SSH via "dweller@localhost". They successfully interacted with the repository on disk as the "epriestley" user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7589
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary:
Fixes T3034. This is obsoleted by modern policies.
This was written by a Facebook intern and is rarely used -- the Hive install might be the only use in the wild. It has never really worked correctly.
Test Plan: `grep`; browsed Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3034
Differential Revision: https://secure.phabricator.com/D7568
Summary: I'm planning to add more detailed info to Diffusion itself, but catch the big issue here.
Test Plan: Hit config issue locally, then resolved it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7439
Summary: We've had support for this for a long time, but it was conditional on config. Since it more-or-less actually does something now, just enable it unconditionally.
Test Plan: Settings -> SSH Public Keys
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7426
Summary:
Gets rid of some old Differential-specific nonsense and replaces it with general runtime-pluggable Remarkup rules.
Facebook: This removes two options which may be in use. Have any classes being added via config here just subclass the new abstract bases instead. This should take 5 seconds to fix. You can adjust order by overriding `getPriority()` on the rules, if necessary.
Test Plan: See comments.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, andrewjcg, aran
Differential Revision: https://secure.phabricator.com/D7393
Summary:
While we mostly have reasonable effective object accessibility when you lock a user out of an application, it's primarily enforced at the controller level. Users can still, e.g., load the handles of objects they can't actually see. Instead, lock the queries to the applications so that you can, e.g., never load a revision if you don't have access to Differential.
This has several parts:
- For PolicyAware queries, provide an application class name method.
- If the query specifies a class name and the user doesn't have permission to use it, fail the entire query unconditionally.
- For handles, simplify query construction and count all the PHIDs as "restricted" so we get a UI full of "restricted" instead of "unknown" handles.
Test Plan:
- Added a unit test to verify I got all the class names right.
- Browsed around, logged in/out as a normal user with public policies on and off.
- Browsed around, logged in/out as a restricted user with public policies on and off. With restrictions, saw all traces of restricted apps removed or restricted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7367
Summary: Fixes T4001. I broke this some time ago and no one has complained. I don't think it gets much use, and we haven't added it for the newer apps. Just get rid of it rather than adapt the URIs for ApplicationSearch.
Test Plan: Unit tests, sent myself some email.
Reviewers: zeeg, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4001
Differential Revision: https://secure.phabricator.com/D7355
Summary:
Ref T603. This cleans up an existing callsite in the policy filter, and opens up some stuff in the future.
Some policy objects don't have real PHIDs:
PhabricatorTokenGiven
PhabricatorSavedQuery
PhabricatorNamedQuery
PhrequentUserTime
PhabricatorFlag
PhabricatorDaemonLog
PhabricatorConduitMethodCallLog
ConduitAPIMethod
PhabricatorChatLogEvent
PhabricatorChatLogChannel
Although it would be reasonable to add real PHIDs to some of these (like `ChatLogChannel`), it probably doesn't make much sense for others (`DaemonLog`, `MethodCallLog`). Just let them return `null`.
Also remove some duplicate `$id` and `$phid` properties. These are declared on `PhabricatorLiskDAO` and do not need to be redeclared.
Test Plan: Ran the `testEverythingImplemented` unit test, which verifies that all classes conform to the interface.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7306
Summary: This builds out and implements PHUIPropertyListView (container) and PHUIPropertyListItemView (section) as well as adding tabs.
Test Plan: Tested each page I edited with the exception of Releeph and Phortune, though those changes look ok to me diff wise. Updated examples page with tabs.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7283
Summary:
I'm just going to store application policy settings (like view/edit policy, and default policies for content) in config, because:
1) We'll need access to it on every page, and Config is "free" since we already pull it.
2) Building separate storage and transactions seems like overkill, we get less-nice but pretty-reasonable transactions for free with config.
3) We could easily move it later if this is a bad call.
Also fix some formatting.
Test Plan: See future revisions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7202
Summary:
Three changes here.
- Add `setActionList()`, and use that to set the action list.
- Add `setPropertyList()`, and use that to set the property list.
These will let us add some apropriate CSS so we can fix the border issue, and get rid of a bunch of goofy `.x + .y` selectors.
- Replace `addContent()` with `appendChild()`.
This is just a consistency thing; `AphrontView` already provides `appendChild()`, and `addContent()` did the same thing.
Test Plan:
- Viewed "All Config".
- Viewed a countdown.
- Viewed a revision (add comment, change list, table of contents, comment, local commits, open revisions affecting these files, update history).
- Viewed Diffusion (browse, change, history, repository, lint).
- Viewed Drydock (resource, lease).
- Viewed Files.
- Viewed Herald.
- Viewed Legalpad.
- Viewed macro (edit, edit audio, view).
- Viewed Maniphest.
- Viewed Applications.
- Viewed Paste.
- Viewed People.
- Viewed Phulux.
- Viewed Pholio.
- Viewed Phame (blog, post).
- Viewed Phortune (account, product).
- Viewed Ponder (questions, answers, comments).
- Viewed Releeph.
- Viewed Projects.
- Viewed Slowvote.
NOTE: Images in Files aren't on a black background anymore -- I assume that's on purpose?
NOTE: Some jankiness in Phortune, I'll clean that up when I get back to it. Not related to this diff.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7174
Summary: This adds the 'PHUIObjectBox' to nearly every place that should get it. I need to comb through Diffusion a little more. I've left Differential mostly alone, but may decide to do it anyways this weekend. I'm sure I missed something else, but these are easy enough to update.
Test Plan: tested each new layout.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7162
Summary: Ref T603. We have a real policy app now, so put the config options there. Revise the description of the public policy switch to make it clear that enabling it immediately opens up the user directory and various other interfaces.
Test Plan: Viewed/edited config setting.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7154
Summary:
Ref T603. Adds clarifying text which expands on policies and explains exceptions and rules. The goal is to provide an easy way for users to learn about special policy rules, like "task owners can always see a task".
This presentation might be a little aggressive. That's probably OK as we introduce policies, but something a little more tempered might be better down the road.
Test Plan: See screenshot.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7150
Summary: I'd like to reuse this for other content areas, renaming for now. This might be weird to keep setForm, but I can fix that later if we need.
Test Plan: reload a few forms in maniphest, projects, differential
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7120
Summary: Ref T3794. Drop auxiliary field, use standard field.
Test Plan: Performed migration, field seemed to survive it intact. Edited and viewed tasks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3794
Differential Revision: https://secure.phabricator.com/D7036
Summary: Fixes T3840. Depends on D7021. See task for discussion. Also improved some config/help stuff.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3840
Differential Revision: https://secure.phabricator.com/D7022
Summary: The adds the ability to set 'properties' such as state, privacy, due date to the header of objects.
Test Plan: Implemented in Paste, Pholio. Tested various states.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7016
Summary: Ref T418. Maniphest has an obsolete class-based field selector. Replace it with CustomField-based selectors, which use the nice config UI and are generally way easier to use.
Test Plan: Added custom fields; edited and viewed custom fields on tasks. Everything worked as expected.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T418
Differential Revision: https://secure.phabricator.com/D6998
Summary: This allows administrative overreach. Administrators can enable `javascript:` and then XSS things if this isn't locked.
Test Plan: Viewed value on web UI, verified it was locked.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6975
Summary:
Fixes T3807. Several issues:
- Currently, we split config of type `list<string>` on commas, which makes it impossible to enter a regex with a comma in it.
- Split on newlines only.
- Some of the examples are confusing (provided in JSON instead of the format you actually have to enter them).
- Show examples in the same format you should enter text.
- We didn't validate regexps.
- Introduce `list<regex>` to validate regexes.
@hlau: Note that the old config format for the bugtraq stuff implied the delimiters on the regular expression. They are no longer implied. The examples show the correct format.
Test Plan: Viewed and edited affected config, hitting error and success cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: hlau, aran
Maniphest Tasks: T3807
Differential Revision: https://secure.phabricator.com/D6969
Summary: Ref T603. Ref D6941.
Test Plan: Clicked around all over - looked good. I plan to re-test D6941 to make sure the executeOne case works now as intended
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6944
Summary: Adds plain support for object lists that just look like lists
Test Plan: review UIexamples and a number of other applications
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6922
Summary: Ref T3780. Facebook has some environmental / itermittent stuff which would be easier to debug with host information on the setup issue screen.
Test Plan:
Checked both in-chrome and out-of-chrome versions of this screen, both looked reasonable.
{F56694}
Reviewers: wez, btrahan
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T3780
Differential Revision: https://secure.phabricator.com/D6842
Summary:
This attempts some consistency in form layouts. Notably, they all now contain headers and are 16px off the sides and tops of pages. Also updated dialogs to the same look and feel. I think I got 98% of forms with this pass, but it's likely I missed some buried somewhere.
TODO: will take another pass as consolidating these colors and new gradients in another diff.
Test Plan: Played in my sandbox all week. Please play with it too and let me know how they feel.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6806
Summary:
We can get this out of PHIDType reasonably in all cases and simplify implementation here.
None of these translate correctly anyway so they're basically debugging/development strings.
Test Plan: `grep`, browsed some transactions
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6786
Summary:
^\s+(['"])dust\1\s*=>\s*true,?\s*$\n
Test Plan: Looked through the diff.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6769
Summary: See IRC. This is dumb but I think we should try to work by default on Debian, and it doesn't cost us too much. See inline comment for more.
Test Plan:
- No `disable_functions`, restarted, worked fine.
- Set `disable_functions = pcntl_derp`, restarted, worked fine.
- Set `disable_functions = derp`, restarted, setup fatal.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6741
Summary:
Fixes T3709. PHP has two configuration options ('disable_functions', 'disable_classes') which allow functions and classes to be blacklisted at runtime.
Since these break things in an unclear way, raise a setup fatal if they are set.
We take a slightly more tailored approach to these in `phd` already, but I'd rather try just saying "no, this is bad" and see if we can get away with it. I suspect we can, and there's no legitimate reason to blacklist functions given that Phabricator must have access to, e.g., `proc_open()`.
Test Plan: {F54058}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3709
Differential Revision: https://secure.phabricator.com/D6739
Summary: Fixes T3710. The text on these options is switched around.
Test Plan: {F54051} {F54052}
Reviewers: btrahan, nmalcolm, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3710
Differential Revision: https://secure.phabricator.com/D6737
Summary: Fixes T1144. Though actually I think T1144 wanted some handy way to email from the command-line / arc, this is cooler. :D
Test Plan: set conf properly and then ./bin/mail receive-test --as btrahan --to pasties@phabricator.dev | README --> it worked...! couldn't test files as easily but verified exception thrown when I tried to test.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1144
Differential Revision: https://secure.phabricator.com/D6622
Summary:
Ref T3373. The submit listener doesn't properly scope the form it listens to right now, so several forms on the page mean that comments post to one of them more or less at random.
Scope it properly by telling it which object PHID it is associated with.
Test Plan: Made Question comments, saw comments Ajax in on the question itself rather than on an arbitrary answer.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3373
Differential Revision: https://secure.phabricator.com/D6611
Summary:
Fixes T3632. Cleans up a bunch of DarkConsole stuff:
- The config setting had out-of-date instructions. Modernize the instructions.
- The setting was sort of hidden under "Display Preferences". Move it to a new "Developer Preferences".
- The setting magically appeared if DarkConsole was enabled on the install. Instead, always show it but explain why it isn't availalbe.
- When the user enables the console, also force it to actually be shown.
- Call out instructions about use of the "`" key more clearly.
Test Plan: Viewed config setting. Viewed settings panel. Changed setting. Enabling the setting showed DarkConsole.
Reviewers: garoevans, chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3632
Differential Revision: https://secure.phabricator.com/D6594
Summary: The `phabricator.allowed-uris` config setting is not checked properly when trying to set cookies.
Test Plan:
Set an alternate URI, then accessed Phabricator. No longer received a secondary cookie error.
Hit the new exceptions to test them:
{F51131}
{F51132}
Reviewers: btrahan, garoevans
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6528
Summary:
See discussion in T2715. Currently, PHIDs are all hard coded in the PHID application. In the long run, we need to move them out into actual applications.
A specific immediate issue is Releeph, which uses a very very old and very broken mechanism to inject PHIDs in a way that only sort of works.
Moving forward, every PHID type will be provided by a `PhabricatorPHIDType` subclass, which will manage loading it, etc.
This also moves toward cleaning up the "load objects by name" (where "name" means something like `D12`) code, which is an //enormous// mess and spread across at least 4-5 callsites.
Test Plan: Used `phid.lookup` and `phid.query` to load Slowvotes.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6502
Summary: Fixes T3453. Makes it easier for me to get version info when supporting users, since they can copy/paste from the web UI instead of running a bunch of `git` commands.
Test Plan: {F50749}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3453
Differential Revision: https://secure.phabricator.com/D6491
Summary:
Ref T2852. It's a little tricky to figure out Asana workspace IDs right now. If the viewer has a linked account, just pull their workspaces and show them which IDs are available.
(In theory, we could use a `<select>`, but it would have more edge cases; this seems like a pretty solid fix.)
Test Plan: {F49938}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2852
Differential Revision: https://secure.phabricator.com/D6437
Summary: Fixes T3525. This feels way better, although it's still a little hard for me to pick out of lists with otherwise default-colored items.
Test Plan: {F49910} {F49911}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3525
Differential Revision: https://secure.phabricator.com/D6435
Summary:
- The dialog has no body text.
- It uses an "Ignore" link because it predates action items.
Test Plan:
{F49894}
{F49895}
{F49896}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6433
Summary:
These versions are broken, but package distros seem to be picking them up. :/
Since the error you get is completely useless, fatal immediately with a useful message.
Ref T2594.
Test Plan: Faked verisions and hit the issue.
Reviewers: btrahan
Reviewed By: btrahan
CC: brennantaylor, Arijit, aran
Maniphest Tasks: T2594
Differential Revision: https://secure.phabricator.com/D6415
Summary: Fixes T3501. `apc.stat` should generally be 0 in production and 1 in development. Raise a setup warning if it isn't.
Test Plan:
Hit both setup warnings.
{F49176}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3501
Differential Revision: https://secure.phabricator.com/D6376
Summary:
- Add GC support to conduit logs.
- Add Query support to conduit logs.
- Record the actual user PHID.
- Show client name.
- Support querying by specific method, so I can link to this from a setup issue.
@wez, this migration may not be fast. It took about 8 seconds for me to migrate 800,000 rows in the `conduit_methodcalllog` table. This adds a GC which should keep the table at a more manageable size in the future.
You can safely delete all data older than 30 days from this table, although you should do it by `id` instead of `dateCreated` since there's no key on `dateCreated` until this patch.
Test Plan:
- Ran GC.
- Looked at log UI.
- Ran Conduit methods.
Reviewers: btrahan
Reviewed By: btrahan
CC: wez, aran
Differential Revision: https://secure.phabricator.com/D6332
Summary: Fixes T3400. Users are crafty. Attempt to outwit them.
Test Plan: Added all kinds of nonsense to my PATH to hit all the errors. Verified sensible-looking error messages which I couldn't figure out any way to misread or outwit.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T3400
Differential Revision: https://secure.phabricator.com/D6318
Summary:
Fixes T3436. Currently, when installs have configuration options which we don't know about, we raise a fairly confusing/ambiguous message about the options being unknown. Instead:
- Keep a list of previously valid (but now deleted) config, with explanatory reasons for what happened to it. Present this information, along with altenate wording ("Obsolete Config" instead of "Unknown Config") where applicable.
- Show a list of all the places the config is defined.
- Provide an active link to delete it from the web UI.
- Provide a command to delete it from the CLI.
- Allow `bin/config delete` to delete configuration options which no longer have a definition.
Test Plan:
- Set an auth key in database, local and file config.
- Walked through the setup issue, cleaning it up.
- Set an invalid key and made sure I still got a reasonable error (this now has better cleanup instructions).
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3436
Differential Revision: https://secure.phabricator.com/D6317
Summary: When I ignore setup issues, I want them to look dealt with, and keep yellow for new ones. Also updated callout colors.
Test Plan: Ignored a number of issues.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6300
Summary: Ref T3322. Depends on D6297. Here are some Phabricator tweaks to complment D6297.
Test Plan: {F47522}
Reviewers: garoevans
Reviewed By: garoevans
CC: aran, chad
Maniphest Tasks: T3322
Differential Revision: https://secure.phabricator.com/D6298
Summary: Generally prefer 'cards' to represent individual 'items' or 'action items', so I think it works here.
Test Plan: Reload setup issues pages.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6252
Summary:
Ref T1536.
- Move all the provider-specific help into contextual help in Auth.
- This provides help much more contextually, and we can just tell the user the right values to use to configure things.
- Rewrite account/registration help to reflect the newer state of the word.
- Also clean up a few other loose ends.
Test Plan: {F46937}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6247
Summary: Ref T1536. This is the last major migration. Moves us over to the DB and drops all the config stuff.
Test Plan:
- Ran the migration.
- Saw all my old config brought forward and respected, with accurate settings.
- Ran LDAP import.
- Grepped for all removed config options.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran, wez
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6243
Summary:
Ref T1536. Currently, when you install Phabricator you're dumped on the login screen and have to consult the documentation to learn about `bin/accountadmin`.
Instead, detect that an install is running first-time setup:
- It has no configured providers; and
- it has no user accounts.
We can safely deduce that such an install isn't configured yet, and let the user create an admin account from the web UI.
After they login, we raise a setup issue and lead them to configure authentication.
(This could probably use some UI and copy tweaks.)
Test Plan:
{F46738}
{F46739}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T1536
Differential Revision: https://secure.phabricator.com/D6228
Summary:
Ref T3354. There's no way for us to test most of the config options which actually affect this limit, so the Phabricator config is basically a canary value to indicate "the administrator hasn't configured anything yet".
Raise a setup issue if it isn't set. There's a trail to get here from Files, but we've de-emphasized the old-school upload form so it's hard to unearth.
Emphasize the warning that you need to read the documentation and configure like 30 other things to make this work.
Test Plan: Cleared my config, verified I got the issue, read it, set my config, issue went away.
Reviewers: jamesr, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T3354
Differential Revision: https://secure.phabricator.com/D6185
Summary:
Ref T1703. This sets the stage for (but does not yet implement) custom UI types for config. In particular, a draggable list for custom fields.
I might make all the builtin types go through this at some point too, but don't really want to bother for the moment. It would be very slightly cleaner but woudn't get us much of anything.
Test Plan:
UI now renders via custom code, although that code does nothing (produces an unadorned text field):
{F45693}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1703
Differential Revision: https://secure.phabricator.com/D6154
Summary: At the global level, truncate emails at a user-configured size.
Test Plan: Untested, as I could not get PHP to send emails on my box, but if you can this should be very easy to test. Just set the max size to something like .001 kilobytes and make sure it does the right thing.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T1392
Differential Revision: https://secure.phabricator.com/D6118
Summary:
These are a bit tricky because we don't want to require you to install a VCS you don't use just to use Phabricator. Test that repositories exist before performing the checks.
I'll couple this with additional checks during repository creation.
Test Plan: Changed binary names to nonexistent ones, verified setup issues raised properly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6040
Summary:
A few more of these issues have cropped up recently. Basically:
- Webservers often (by default, I guess?) have a different or nonexistent $PATH.
- Users have a hard time figuring this out, since it's not obvious that the webserver might have a different configuration than the CLI, and they can run "git" and such themselves fine, and they don't normally use SetEnv or similar in webserver config.
I've been pursuing one prong of attack here (better detection and more tailored errors); this is a second prong (try to just guess the configuration correctly).
In 99% of cases, the binaries in question are in one of these three places, so just make them the default appended paths. If users have wacky configs they can override the setting.
Test Plan: Viewed config locally.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6039
Summary:
Kind of a quick look at an idea for T2184
Ref T2184
Test Plan: Make sure the site still loads
Reviewers: epriestley
CC: aran, Korvin, mbishopim3
Maniphest Tasks: T2184
Differential Revision: https://secure.phabricator.com/D6045
Summary: I introduced this helper at some point, clean up all the code duplication around content sources.
Test Plan: Grepped; hit edit interfaces for most/all of these.
Reviewers: btrahan, chad, edward
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6030
Summary:
Spent an hour or two helping a user figure this out. Make sure I never do that again.
If the webserver is configured with an empty or bogus PATH, binaries like 'which' and 'diff' (and 'git', and 'svn', etc.) may not be available. In most cases, this is fine, because we get an error like "sh: whatever-command not found", which is obvious to diagnose.
In the case of 'diff', we don't get this, because 'diff' is expected to exit with a nonzero code for differing files -- so we interpret the "sh: whatever-command not found" as "files differ" and then try to parse the empty output.
Explicitly check for 'which' (on Windows, 'where') and 'diff' during setup (I plan to refine the behavior around 'git', 'svn' and 'hg' at some point, but this is less pressing since the errors are trivial to support).
Test Plan: Faked failures on all modes, verified setup warnings look reasonable.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6008
Summary:
See <https://github.com/facebook/phabricator/issues/320>. We have a soft dependency on 'fileinfo', which we try to recover from (with `file`) but won't be able to on Windows and apparently FreeBSD systems. Since users can ignore setup checks anyway now, just raise a warning during install.
I believe almost all installs should have this extension, it has been part of the core for a long time.
Test Plan: Faked setup failure, looked at warning. "Solved" setup failure, saw it go away.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D5952
Summary: Using PhabricatorExternalAccount in place maniphest.default-public-author.
Test Plan:
Using receivemail to see if the a new entry is made in the 'phabircator_user.user_externalaccount' table. Few things, I noticed that phabricator creates table 'user_externalaccout'. And now it throws up error 'Unknown column 'dateCreated' in 'field list''. Awaiting your comments.
{F41370}
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Maniphest Tasks: T1205
Differential Revision: https://secure.phabricator.com/D5747
Summary:
Currently, `isInstalled()` and `getAllInstalledApplications()` are inconsistent:
- `isInstalled()` returns true for beta apps, even if `phabricator.show-beta-applications` is false.
- `getAllInstalledApplications()` omits beta apps if `phabricator.show-beta-applications` is false.
Making the beta config control installs (not just homepage visibility) makes far more sense as we roll out more thorough application integrations.
Make `isInstalled()` respect beta, and clean up some callsites.
D5602 builds on this.
Test Plan: Installed/uninstalled beta apps, verified Conpherence menu/panel and other application integrations dropped out of the UI.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D5603
Summary:
Currently PhabricatorSetupIssueView will show the current values of
configuration options regardless of whether or not they are defined
as hidden options. This means that if the MySQL server stops, Phabricator
will present the MySQL connection credentials to anyone who can access
the Phabricator page.
Test Plan:
Stop the MySQL server for a Phabricator instance. It should display 'hidden'
instead of the MySQL password.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5596
Summary:
See D5561. Ref T2378.
- Add `support/bin/*` to .gitignore so any symlinks or binaries won't get picked up by Git.
- Add a README so Git preserves the directory and there's at least //some// documentation of its existence.
Test Plan: ummmmm
Reviewers: jevripio, codeblock, btrahan
Reviewed By: jevripio
CC: aran
Maniphest Tasks: T2378
Differential Revision: https://secure.phabricator.com/D5562
Summary:
Use correct spelling of 'environment.append-paths' so that the current
value of the variable will display as expected in the
'pygmentize Not Found' setup issue screen.
Test Plan:
* Enabled Pygments but haven't installed it
* Follow 'unresolved setup issues' link to 'Not Found' screen
* See that 'envinronment.append-paths' is None
* Set 'environment.append-paths'
* See that 'envinronment.append-paths' is still None
* Apply this fix
* See that 'environment.append-paths' is now '/usr/bin'
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5555
Summary:
We have a fair number of conditionals on the existence of the access log. Instead, always build it and just don't write it if the user doesn't want a version on disk.
Also, formalize logged-in user PHID (avoids object existence juggling) in the access log and move microseconds-since-startup to PhabricatorStartup (simplifies index.php).
Depends on D5532. Fixes T2860. Ref T2870.
Test Plan: Disabled access log, verified XHProf writes occurred correctly.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2860, T2870
Differential Revision: https://secure.phabricator.com/D5533
Summary: Use UA strings to detect platform; override general monospaced settings with platform-specific ones. Fixes T2868.
Test Plan: whatcouldgowrong
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2868
Differential Revision: https://secure.phabricator.com/D5526
Summary:
The welcome.enabled feature is turned on by default; unsure of
whether this is desired by upstream.
Test Plan:
Apply the patch and see the welcome content. It's configurable
in the config.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5339
Summary:
Initial pass at elements appearing on M10.
Glaring omissions:
- I cut a single icon out of M10 in a haphazard way.
- No linear graident texture on the cards.
Test Plan:
{F35248}
{F35249}
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5311
Summary: After D5305, this method does nothing since we automatically figure out what we need to do.
Test Plan:
- Viewed a page with the main menu on it (MainMenuView).
- Viewed a revision with transactions on it (TransactionView).
- Viewed timeline UIExample (TimelineView, TimelineEventView).
- Viewed a revision (PropertyListView).
- Viewed a profile (ProfileHeaderView).
- Viewed Pholio list (PinboardView, PinboardItemView).
- Viewed Config (ObjectItemView, ObjectItemListView).
- Viewed Home (MenuView).
- Viewed a revision (HeaderView, CrumbsView, ActionListView).
- Viewed a revision with an inline comment (anchorview).
- Viewed a Phriction diff page (AphrontCrumbsView).
- Filed T2721 to get rid of this.
- Looked at Pholio and made inlines and comments (mockimages, pholioinlinecomment/save/edit).
- Looked at conpherences.
- Browsed around.
Reviewers: chad, vrana
Reviewed By: chad
CC: edward, aran
Differential Revision: https://secure.phabricator.com/D5307
Summary: T2381
Test Plan:
Click on the ignore link in /config/issue/ and respond to the dialog box.
Also, test uninstalling and reinstalling an application in the web UI (to verify that refractoring didn't break anything).
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2381
Differential Revision: https://secure.phabricator.com/D5234
Summary: Adds a hover state, helpful for large stacked lists. Also applied dust to projects and config to go with the hover changes.
Test Plan: Config, Projects
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5223
Summary: Fixes T2659. These didn't exist until recently.
Test Plan: {F34556}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2659
Differential Revision: https://secure.phabricator.com/D5221
Summary:
Provide a viewer to all remarkup engines.
This fixes commit summaries in Diffusion, which were failing to link because they didn't have a user and thus couldn't see/load `D123`, e.g.
Test Plan: Grepped for engine creation.
Reviewers: vrana
Reviewed By: vrana
CC: aran, edward
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D5152
Summary: We use mysqli if it's available by default. Don't require installs to build with mysql.
Test Plan: Applied to new secure.phabricator.com install.
Reviewers: chad, vrana
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5194
Summary: hehehe
Test Plan: Reloaded /config/, no more bogus setup issuse.
Reviewers: kwadwon, staticshock, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5158
Summary: Check if pygmentize is runnable if pygments is enabled
Test Plan: Enable pygments with pygmentize unavailable in path
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5157
Summary: T2381
Test Plan:
Include existing setup issues in the ignore config option,
reduces the number of setup issues in the status bar, moves ignored
issues to the bottom of the list, and marks them as ignored.
Also include a string corresponding to no setup issue, and verify that
application does not break.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5072
Summary: Makes sense with `QueryFuture`.
Test Plan: Switched secure.phabricator.com to MySQLi and nothing exploded.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5066
Test Plan: Enter in a url and create a macro. :)
Reviewers: epriestley
Reviewed By: epriestley
CC: epriestley, aran, dctrwatson, Korvin
Differential Revision: https://secure.phabricator.com/D5039
Summary: Mostly applies a new call spacing rule; also a few things that have slipped through via pull requests and such
Test Plan: `find src/ -type f -name '*.php' | xargs -n16 arc lint --output summary --apply-patches`
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5002
Summary:
Some transactions (like editing configuration values, task descriptions, or Conpherence images) can't be simply explained and need an additional larger element to show them fully (like a text diff).
Support change details like this in ApplicationTransactions. Implements the element in Config, so you can see changes.
Test Plan: {F32974}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2213
Differential Revision: https://secure.phabricator.com/D4984
Summary: Sgrepped for `"=~/</"` and manually changed every HTML.
Test Plan: This doesn't work yet but it is hopefully one of the last diffs before Phabricator will be undoubtedly HTML safe.
Reviewers: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4927
Summary: They are same because render() returns safe HTML and raw strings are automatically escaped.
Test Plan: None.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4909
Summary:
I like this abstraction better.
Result of `phutil_implode_html()` may be also used as a param of `hsprintf()`.
Test Plan: None.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4904
Summary:
Lots of killed `phutil_escape_html()`.
Done by searching for `AphrontTableView` and then `$rows` (usually) backwards.
Test Plan:
Looked at homepage.
echo id(new AphrontTableView(array(array('<'))))->render();
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4884
Summary: Route all `$_SERVER['HTTP_...']` stuff through AphrontRequest (it would be nice to make this non-static, but the stack is a bit tangled right now...)
Test Plan: Verified CSRF and cascading profiling. `var_dump()`'d User-Agent and Referer and verified they are populated and returned correct values when accessed. Restarted server to trigger setup checks.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4888
Summary: T2361
Test Plan:
Set value to metamta.mail-adapter and reload page. Defaults to assigned value.
Performed same test with metamta.can-send-as-user to check that functionality is not broken for config 'boolean' options.
Reviewers: epriestley
Reviewed By: epriestley
CC: kwadwon, aran, Korvin
Maniphest Tasks: T2361
Differential Revision: https://secure.phabricator.com/D4881
Summary: Preserving animation of GIF profile Pictures
Test Plan: Uploaded Animated images as profile pictures to check if the animation of gif images is preserved and it does :) somewhat !
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4833
Summary: Done by searching for `AphrontErrorView` and then `appendChild()`.
Test Plan:
Looked at Commit Detail.
Looked at Revision Detail.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4843
Summary:
- Make the warning describe rationale and point at the MySQL manual explicitly.
- Add a reference to the developer mode config, in case the user wants to resolve the probelm by disabling developer mode.
- Now that the message is huge, provide a summary.
- Move from "Database" to "MySQL" setup checks -- this is kind of arbitrary, but the former is used for fatals (pre-install) and the latter for warnings (post-install) right now. This has no practical impact on anything and is purely stylistic.
Test Plan:
{F31798}
{F31799}
Reviewers: edward, blc
Reviewed By: edward
CC: aran
Differential Revision: https://secure.phabricator.com/D4835
Summary:
I attempted to test every interface. I probably missed some stuff, but I at least have some level of confidence that the `phutil_tag` branch is fairly stable.
Fixed these issues:
[1] Fixed a Herald issue with object links in transcripts. Some actions return
links; this was previously hard-coded.
[2] DarkConsole refactoring created an issue where the "`" event handler registered too many times.
[3] Fixed a bug where `strlen($value)` was being checked, but fields may now return array(). Possibly we should implement phutil_is_empty_html() or similar.
[4] Fixed a undefined variable issue for image edit transactions.
[5] Fixed an issue with rendering participant transactions. This required phutil_safe_html() because `pht()` can't handle `array()` for `%s`.
[6] Fixed an issue where feed was entirely overescaped by reverting an overly ambitious render_tag -> tag.
[7] Fixed an issue with strict tables and inserting `''` instead of `0` into an integer column.
[8] Fixed an issue where • was shown escaped.
[9] Fixed an issue where "no data" was overescaped.
[10] Fixed an issue with strict tables and inserting `''` instead of `0` into an integer column.
[11] Fixed an issue with strict tables and inserting `''`.
[12] Fixed an issue with missing space after ":" for mini panels.
Encountered (but did not fix) these issues:
[X1] "e" works incorrectly on comments you are not allowed to edit. Did not fix.
[X2] Coverage currently interacts incorrectly with "--everything" for Phutil tests.
Test Plan:
- Viewed Differential.
- Created a diff via copy/paste.
- Viewed standalone diff.
- Jumped to diff via changeset table.
- Created a revision.
- Updated revision.
- Added a comment.
- Edited revision dependencies.
- Edited revision tasks.
- Viewed MetaMTA transcripts.
- Viewed Herald transcripts [1].
- Downloaded raw diff.
- Flagged / unflagged revision.
- Added/edited/deleted inline comment.
- Collapsed/expanded file.
- Did show raw left.
- Did show raw right.
- Checked previews for available actions.
- Clicked remarkup buttons
- Used filetree view.
- Used keyboard: F, j, k, J, K, n, p, t, h, "?" [2] [X1].
- Created a meme.
- Uploaded a file via drag and drop.
- Viewed a revision with no reviewers.
- Viewed a revision with >100 files.
- Viewed various other revisions [3].
- Viewed an image diff.
- Added image diff inline comments.
- Viewed Maniphest.
- Ran various queries.
- Created task.
- Created similar task.
- Added comments to tasks.
- Ran custom query.
- Saved custom query.
- Edited custom queries.
- Drag-reordered tasks.
- Batch edited tasks.
- Exported tasks to excel.
- Looked at reports (issue in T2311 notwithstanding).
- Viewed Diffusion.
- Browsed Git, SVN, HG repositories.
- Looked at history, browse, change, commit views.
- Viewed audit.
- Performed various audit searches.
- Viewed Paste.
- Performed paste searches.
- Created, edited, forked paste.
- Viewed Phriction.
- Edited a page.
- Viewed edit history.
- Used search typeahead to search for user / application.
- Used search to search for text.
- Viewed Phame.
- Viewed Blog, Post.
- Viewed live post.
- Published/unpublished post.
- Previewed post.
- Viewed Pholio.
- Edited/commented mock.
- Viewed ponder.
- Viewed question.
- Added answer/comment.
- Viewed Diviner.
- Viewed Conpherence [4] [5].
- Made Conpherence updates.
- Viewed calendar.
- Created status.
- Viewed status.
- Viewed Feed [6].
- Viewed Projects.
- Viewed project detail.
- Edited project.
- Viewed Owners.
- Viewed package detail.
- Edited package [7].
- Viewed flags.
- Edited flag.
- Deleted flag.
- Viewed Herald.
- Viewed rules.
- Created rule.
- Edited rule.
- Viewed edit log.
- Viewed transcripts.
- Inspected a transcript.
- Viewed People.
- Viewed list.
- Administrated user.
- Checked username/delete stuff.
- Looked at create/import LDAP/activity logs.
- Looked at a user profile.
- Looked at user about page.
- Looked at Repositories.
- Edited repository.
- Edited arcanist project.
- Looked at daemons.
- Looked at all daemons [8].
- Viewed combined log.
- Looked at configuration.
- Edited configuration.
- Looked at setup issues [9].
- Looked at current settings.
- Looked at application list.
- Installed / uninstalled applications [10].
- Looked at mailing lists.
- Created a mailing list.
- Edited a mailing list.
- Looked at sent mail.
- Looked at received mail.
- Looked at send/receive tests.
- Looked at settings.
- Clicked through all the panels.
- Looked at slowvote.
- Created a slowvote [11].
- Voted in a slowvote.
- Looked at Macro.
- Created a macro.
- Edited a macro.
- Commented on a macro.
- Looked at Countdown.
- Created a Countdown.
- Looked at it.
- Looked at Drydock.
- Poked around a bit.
- Looked at Fact.
- Poked around a bit.
- Looked at files.
- Looked at a file.
- Uploaded a file.
- Looked at Conduit.
- Made a Conduit call.
- Looked at UIExamples.
- Looked at PHPAST.
- Looked at PHIDs.
- Looked at notification menu.
- Looked at notification detail.
- Logged out.
- Logged in.
- Looked at homepage [12].
- Ran `arc unit --everything --no-coverage` [X2].
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4807
Summary: Suggest the MySQL mode STRICT_ALL_TABLES during setup if it is not set. Small improvement to the phabricator.developer-mode comments.
Test Plan: Set the global sql_mode to include or exclude STRICT_ALL_TABLES and check for desired behavior.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4803
