Summary:
Ref T2543. Currently, we always do some special things when a revision is created, mostly adding more stuff to the mail.
With drafts, we want to suppress initial mail and send this big, rich mail only when the revision actually moves out of "draft".
Prepare the code for this, with the actual methods hard-coded to the current behavior. This will probably take some tweaking but I think I got most of it.
Test Plan: Banged around in Differential so it sent some mail, saw normal mail without anything new.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18627
Summary:
Ref T2543. Most actions are not available for drafts.
Authors can "Request Review" (move out of draft to become a normal revision) or "Abandon".
Non-authors can't do anything (maybe we'll let them do something later -- like "Commandeer"? -- if there's a good reason).
Test Plan: Viewed a draft revision as an author and non-author, saw fewer actions available.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18626
Summary: See PHI79. When you edit another user's SSH keys (normally, for a bot account) we currently redirect you to an older URI.
Test Plan:
- Viewed a bot's profile page.
- Clicked "Edit Settings" on the Manage page.
- Went to "SSH Keys".
- Uploaded an SSH key.
- Before: redirected to a 404 after finishing the workflow.
- After: redirected to the same page after the workflow.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18633
Summary:
See PHI78. The user was getting this message and (reasonably) interpreted it to mean "reset mail can never be sent to unverified addresses".
Reword it to be more clear, albeit an entire paragraph long. I don't really have a good solution in these cases where we'd need a whole page to explain what's happening (this, plus "we can't tell you which address you should use because an attacker could get information if we did" and "this rule defuses the risk that an opportunistic attacker may try to compromise your account after you add an email you don't own by mistake"). We could write it up separately and link to it, but I feel like that stuff tends to get out of date.
Just land somewhere in the middle.
Test Plan: {F5189105}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18630
Summary:
Ref T2543. There's no way to put revisions into this state yet, but start adding support for when there is.
Adds the status constant, plus support for bucketing them.
Test Plan:
- Manually put a revision in "Draft" state by updating the database directly.
- Verified my drafts showed up in a "Drafts" section on the bucket view.
- Verified others' drafts did not appear on the action bucket view.
- Viewed revisions, queried for "Draft" revisions, etc (stuff we get for free).
{F5186781}
{F5186782}
{F5186783}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18625
Summary:
Fixes T12986. I caught this bug in the changes from D18584: when we moved a large hunk to file storage, we would decompress it but keep the "deflated" flag. This could cause confusion when loading it later. I missed this in testing since I wasn't exhaustive enough in checking hunks and didn't run into a compressed one.
Instead of compressing on `save()`, compress during the normal workflow.
We currently never advise users to run this workflow so I didn't bother trying to clean up possible existing migrations.
Test Plan:
- Ran `bin/differential migrate-hunk` on compressed hunks, moving them to and from file storage. Saw them work correctly and remain compressed.
- Created new small (uncompressed) and large (compressed) hunks, verified they work properly and get compressed (if applicable).
- Used `bin/cache purge --caches changeset` to clear changeset caches and make sure the actual table was being hit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12986
Differential Revision: https://secure.phabricator.com/D18624
Summary: Despite how I (and everyone else?) pronounce it, it is spelled with an "a". See PHI38.
Test Plan: Googled both spellings.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18622
Summary:
See PHI71. These didn't get properly updated when we wrote Subprojects and Milestones, and should use materialized members, not raw members. Swap the query so projects you are an indirect member of (e.g., milestones you are a member of the parent for, and parent projects you are a member of a subproject of) are included in the result list.
Also fix a bad typeahead datasource.
Test Plan:
- Ran a dry run with the test console, saw project PHIDs for milestones and parent projects in the raw field value.
- Tried to set "Author's projects" to a user, no longer could.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18619
Summary:
Ref T11823. I think this is the last callsite which relies on the old data format: `bin/repository parents` rebuilds a cache which we don't currently use very heavily.
Update it to work with the new data.
Test Plan: Ran `bin/repository parents <repository> --trace`, saw successful script execution and reasonable-looking output.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18615
Summary:
Ref T11823. This is the meaty part of the change, and updates `RefEngine` to use separate RefCursor (for names) and RefPosition (for actual commit positions) tables.
I'll hold this whole series until after the release cut so it has some time to bake on `secure` to look for issues. It's also not a huge problem if there are bugs here since these tables are just caches anyway, although they do feed into some other things, and obviously it's never good to have bugs.
Test Plan:
- This logic can be invoked directly with `bin/repository refs <repository> --trace --verbose`.
- Ran that on unchanged repositories, new branches, removed branches, and modified branches. Saw appropriate output and cursor positions.
- Ran on a mercurial repository to test the close/open logic, saw it correct open/closed state of incorrect positions.
- Browed around Diffusion in various repositories.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18614
Summary:
Ref T11823. This change isn't standalone, but prepares for the more involved code change by dropping obsolete columns from the RefCursor table and adding the unique key we need to prevent the ambiguous/duplicate refs issue.
This data was moved to the RefPosition table in D18612.
Test Plan: Ran storage upgrade. See next revision for more substantial testing of this change series.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18613
Summary:
Ref T11823. Currently, we have a "RefCursor" table which stores rows like `<branch or tag name, commit it is pointing at>` with some more data.
Because Mercurial can have a single branch pointing at several different places, this table must allow multiple rows with the same branch or tag name.
Among other things, this means there isn't a single PHID which can be used to identify a branch name in a stable way. However, we have several UIs where we want to be able to do this.
Some specific examples where we run into trouble: in Mercurial, if there are 5 heads for "default", that means there are 5 phids. And currently, if someone deletes a branch, we lose the PHID for it. Instead, we'd rather retain it so the whole world doesn't break if you accidentally delete a branch and then fix it a little later.
(I'll likely hold this until the rest of the logic is fleshed out a little more in followup changes.)
Test Plan: Ran `bin/storage upgrade`, saw the table get created without warnings.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18602
Summary:
See <https://discourse.phabricator-community.org/t/unable-to-use-current-mercurial-on-debian-stretch/391>.
The Mercurial commit is helpful in particular: <https://www.mercurial-scm.org/repo/hg/rev/77eaf9539499>
We weren't vulnerable to the security issue (users can not control any part of the command) but pass the working directory explicitly to get past the new safety check.
I left `setCWD()` in place (a few lines below) just because it can't hurt, and in some other contexts it sometimes matter (for example, if commit hooks execute, they might inherit the parent CWD here or in other VCSes).
Test Plan:
- Cloned from a Mercurial repo locally over HTTP.
- Verified that SSH cloning already uses `-R` (it does, see `DiffusionMercurialServeSSHWorkflow`).
- Did not actually upgrade to Mercurial 4.0/4.1.3 to completely verify this, but a user in the Discourse thread asserted that a substantially similar fix worked correctly.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18611
Summary: See T12414. This just gets started; we still need edit endpoints for network interfaces and bindings.
Test Plan: Created some devices/services from the conduit UI.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18605
Summary:
See PHI66. See that issue for context. This UI is bad broken legacy junk, but was especially broken when reporting merges.
These do not currently generate a "status" transaction, so they were never counted as task closures. Pretend they're normal closures.
This is still wrong, but should be much closer to the real numbers. Specifically, if you merge a closed task into another task, it will incorrectly be counted as an extra close. This could result in negative tasks, but the numbers should be much closer to reality than they are today even so.
The "Facts" application (T1562) is the real pathway forward here in the longer term.
Test Plan:
- Moved my `maniphest_transactions` table aside with `RENAME TABLE ...`.
- Created a new empty table with `CREATE TABLE ... LIKE ...`.
- Reloaded reports UI, saw empty chart.
- Created, closed, and reopened tasks while reloading the chart, saw accurate reporting.
- Merged an open task into another task, saw bad reporting.
- Applied patch, saw the right chart again.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18601
Summary:
Ref T11823. See PHI68. T11823 has a full description of this issue and a plan to fix it, but the full plan is relatively complicated.
Until that can happen, provide a workaround for the biggest immediate issue, where multiple copies of a ref cursor can cause `executeOne()` to throw, since it expects a single result. In practice, these copies are always identical so we can just pick the first one.
This will get cleaned up once T11823 is fixed properly.
Test Plan:
Forced the table into a duplicate/ambiguous state, reproduced a similar-looking error:
{F5180999}
Applied the patch, got the "Land" to work as expected:
{F5181000}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18599
Summary:
Ref T12033. This is a very narrow fix for this issue, but it should fix the major error: don't attach patches if they're bigger than the mail body limit (by default, 512KB).
Specifically, the logs from an install in T12033 show a 112MB patch being attached, and that's the biggest practical problem here.
I'll follow up on the tasks with more nuanced future work.
Test Plan: Enabled `differential.attach-patches`, saw a patch attached to email. Set the byte limit very low, saw patches get thrown away.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12033
Differential Revision: https://secure.phabricator.com/D18598
Summary:
Fixes T12979. In D18457, we added a "No Notifications" setting to let users disable the blue and yellow pop-up notifications that alert you when an object has been updated, since some users found them distracting.
However, the change made "do nothing" the default, so all other `JX.Notification` callsites -- which never pass a preference -- were effectively turned off no matter what your setting was set to. This includes the "Read-Only" mode warning (grey), the "High Security" mode warning (purple), the "timezone" warning, and a few others.
Tweak things a little bit so the setting applies to ONLY blue and yellow ("object you're following was updated" / "this object was updated") notifications, not other types of popup notifications.
Test Plan:
- With notifications on in settings, got blue notifications and "Read-only".
- With notifications off in settings, got "Read-only" but no blue notifications.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12979
Differential Revision: https://secure.phabricator.com/D18600
Summary:
Ref T12819. In D18581, I corrected one bug (ngram selection for terms) but introduced a minor new bug. We now pass `' query '` (term corpus with boundary spaces) to the stemmer, but it bails out on this since English words don't start with spaces.
Trim these extra boundary spaces off before invoking the stemmer.
The practical effect of this is that searching for non-stem variations of a word ("detection") now finds stemmed variations again ("detect"). Prior to fixing this bug, the stem could find longer variations but not the other way around.
Test Plan: Searched for "detection", found results matching "detect" after patch (and saw same results for "detect" and "detection").
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18593
Summary: Ref T12819. Adds some documentation for `-term`, `~term`, `title:term`, etc.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18592
Summary: Ref T12819. Swaps constants so existing configurations that use a "mysql" engine now use the Ferret engine, not an InnoDB/MyISAM FULLTEXT engine.
Test Plan: Swapped my local config back to "mysql" (the default), saw Ferret engine results in the UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18590
Summary:
Ref T12819. These render the little "Searched For: X, Y, U V" hint about how something was parsed.
(This might get a "substring" color or "title only" color or something in the future.)
Test Plan: {F5178807}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18589
Summary:
Ref T12819. Obsoleted by the Ferret engine "Query" field.
This is a compatibility break, I'll note it in the changelog.
Test Plan: Searched for repositories by name with "Query" instead of "Name Contains".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18588
Summary:
Ref T12819. Show the new Ferret engine fields (and enable the indexer) unconditionally.
Also pull them to the top since they're fairly general-purpose and appear more broadly now, and also they actually work correctly (WOW).
Some redundant fields (like "Name Contains" in Repositories and Owners) could probably be removed now, I may clean those up in a followup.
Test Plan: Browsed around, saw Ferret fields in UI without "(Prototype)" suffix.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18587
Summary:
Ref T12819. Obsoleted by the Ferret engine, which is unprototyping shortly.
This breaks compatibility in two ways:
- `maniphest.query` no longer supports "fullText" (now throws an explicit exception).
- Existing saved searches with a "Contains Words" constraint will no longer have that constraint.
It seems unlikely (?) that either of these are seeing too much use, and they should be easy to fix. I'll note them in the changelog.
Test Plan: Viewed Maniphest, no more "Contains Words" field. Called `maniphest.query` with "fullText", got explicit exception.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18586
Summary:
Ref T12932. For long-lived installs, one of the largest tables tends to be the hunk data table. Although it doesn't grow tremendously fast, it's also well suited to storage in Files instead of the database (infrequent access, relatively large blobs of data, mostly one-at-a-time access), and earlier work anticipated eventually adding support for Files storage.
Make Files storage work, and provide `bin/differential migrate-hunk` to manually test/migrate hunks. This is currently the only way hunks get moved to file storage, but I expect to add a GC step which moves them to File storage after 30 days shortly.
The immediate motivation for this is to relieve storage pressure on db001/db002 so we have more headroom for deploying the Ferret engine and its larger indexes (see also T12819).
Test Plan:
- Used `bin/differential migrate-hunk` to move a hunk to and from file storage, verified it survived intact.
- Downloaded the actual stored file, sanity-checked it. Verified permissions.
- Destroyed a diff with `bin/remove destroy`, saw the hunk and file storage destroyed.
- Verified that going from file -> text destroys the old file properly with `migrate-hunk --trace ...`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12932
Differential Revision: https://secure.phabricator.com/D18584
Summary:
Ref T12819. For queries like `v0.2`, we would incorrectly search for ngrams including `0.2`, but this is only a substring ngram: the term corpus splits this into `v0` and `2`, so `0.2` is not in the ngrams table.
When executing term queries, search for term ngrams instead. This makes "v0.2" work properly again.
Test Plan: Searched for "v0.2", found a task with "v0.2" in the title.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18581
Summary:
Ref T12819. The "full" field has all other fields, and the "core" field has "title" and "body". Due to the way the "full" and "core" fields were being built, the "core" field also got included in the "full" field, so the "full" field has two copies of the title, two copies of the body, and then one copy of everything else.
Put only one copy of each distinct thing in each "full" and "core". Also, simplify the logic a little bit so we build these virtual fields in a more consistent way.
Test Plan: Ran `bin/search index` and looked at the fields in the database, saw less redundant information.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18580
Summary:
Ref T12819. Currently, strings are split only on spaces, but newlines (and, if they exist, tabs) should also split strings.
Without this, we can fail to get the proper term boundary tokens for words which begin at the start of a line or end at the end of a line.
Test Plan: Reindexed a document with "xyz\nabc", saw `"yz "` and `" ab"` term boundary tokens generate properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18579
Summary:
Ref T12819. This worked right in a non-cluster environment, but `bin/storage upgrade` iterates over each master in a partitioned cluster environment.
Tweak the API so `bin/storage analyze` targets a single host but `bin/storage upgrade` can hit all the masters.
Test Plan: Will run `bin/storage upgrade` in production again. Ran `upgrade` and `analyze` locally, still work fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18576
Summary: Miss this with earlier pass, updates the VCS password page.
Test Plan: Try to set a vcs password
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18574
Summary:
Ref T12819. Normallly "ANALYZE TABLE" is like sprinkling magic pixie dust on the database and hoping it will make "good vibes" that cause it to go faster, but in at least some concrete cases with the ngrams tables there really was a key cardinality issue which ANALYZE TABLE corrected, fixing bogus query plans.
Add `bin/storage analyze` to analyze all tables, and make `bin/storage upgrade` run it after adjustment if `--no-adjust` is not specified, and make `bin/storage adjust` run it always.
This runs in a couple seconds and should never hurt anything, so it should be fine to sprinkle lots of pixie dust into the `bin/storage` workflow.
Test Plan: Ran `bin/storage analyze`. Ran `bin/storage upgrade`, saw analyze run. Totally felt great vibes and really aligned chakras on the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18573
Summary: Ref T12819. More ferret engine support.
Test Plan: Indexed and searched commits and repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18572
Summary: Ref T12819. Support for Pholio.
Test Plan: Indexed and searched mocks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18569
Summary: Ref T12819. Adds ferret engine support for Calendar events.
Test Plan: Indexed and queried calendar events.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18568
Summary: Ref T12819. Adds Ferret engine support.
Test Plan: Indexed and searched for documents.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18567
Summary: Ref T12819. Adds support for projects.
Test Plan: Indexed and searched for projects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18566
Summary: Ref T12819. Mostly straightforward, with a couple of minor query modernization things.
Test Plan: Indexed and searched for posts and blogs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18565
Summary: Ref T12819. Same deal as before, but smaller diffs after D18559.
Test Plan: Indexed and searched for packages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18564
Summary:
See brief discussion in D18554. All the index tables are the same for every application (and, at this point, seem unlikely to change) and we never actually pass these objects around (they're only used internally).
In some other cases (like Transactions) not every application has the same tables (for example, Differential has extra field for inline comments), and/or we pass the objects around (lots of stuff uses `$xactions` directly).
However, in this case, and in Edges, we don't interact with any representation of the database state directly in much of the code, and it doesn't change from application to application.
Just automatically define document, field, and ngram tables for anything which implements `FerretInterface`. This makes the query and index logic a tiny bit messier but lets us delete a ton of boilerplate classes.
Test Plan: Indexed objects, searched for objects. Same results as before with much less code. Ran `bin/storage upgrade`, got a clean bill of health.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18559
Summary: Ref T12819. Adds Ferret support to Passphrase.
Test Plan: Indexed credentials, searched for credentials.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18556
Summary: Ref T12819. Adds Ferret engine support to initiatives.
Test Plan: Indexed and searched for initiatives.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18555
Summary: Ref T12819. Prepares for Ferret engine support.
Test Plan: Queried for various initiatives.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18554
Summary: Ref T12819. Prepares Fund to move to Ferret.
Test Plan: Searched for initiatives in Fund.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18553
Summary:
Ref T12819. Adds support for indexing user accounts so they appear in global fulltext results.
Also, always rank users ahead of other results.
Test Plan: Indexed users. Searched for a user, got that user.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18552
Summary:
Ref T12819. Currently, under the Ferret engine, we query each application's index separately and then aggregate the results.
At the moment, results are aggregated by type first, then by actual rank. For example, all the revisions appear first, then all the tasks.
Instead, surface the internal ranking data from the underlying query and sort by it.
Test Plan: Searched for "A B" with a task named "A B" and a revision named "A". Saw task first. Broadly, saw mixed task and revision order in result sets.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18551
Summary:
Ref T12819. I started trying to get individual engines to drive these constraints (e.g., `ManiphestTaskQuery` can do most of the work) but this is a big pain, especially since most engines don't support "any owner" or "no owner", and not everything has an owner, and so on and so on. Going down this path would have meant a huge pile of stub functions everywhere, I think.
Instead, drive these through the main engine using the fulltext document table, which already has everything we need to apply these constraints in a uniform way.
Also tweak some parts of query construction and result ordering.
Test Plan: Searched for documents by author, owner, unowned, any owner, tags, subscribers, fulltext in global search. Got sensible results without any application-specific code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18550
Summary: Updates and clarifies UI
Test Plan: New peoples, new bots, new mailing list
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18562
Summary: New edit ui
Test Plan: create a space
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18558
Summary: This should have a border
Test Plan: Reload page
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18549
Summary:
Ref T12819. Provides a Ferret-engine-based fulltext engine to ultimately replace the InnoDB fulltext engine.
This is still pretty basic (hard-coded and buggy) but technically sort of works.
To activate this, you must explicitly configure it, so it isn't visible to users yet.
Test Plan: Searched for objects with global fulltext search, got a mixture of matching revisions and tasks back.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18548
Summary: Ref T12819. Uses an extension rather than hard-coding support into Maniphest.
Test Plan: Saw "Query" field appear in Differential, which also implements the interface and has support. Used field in both applications.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18547
Summary:
See PHI57. For example, a query for "ios, only()" finds tags tasked with iOS, exactly, and no other tags.
I called this "only()" instead of "exact()" because we use the term/function "Exact" elsewhere with a different meaning, e.g. in Differential.
Test Plan:
Basic query for a tag:
{F5168857}
Same query with "only", finds tasks tagged with only that tag:
{F5168858}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18543
Summary: Ref T12819. This was originally intended for debugging, but never actually used and not clearly useful. There are no callers and it probably does not work. Just get rid of it.
Test Plan: Grepped for callers; none exist.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18544
Summary:
Fixes T12118. See PHI54. This adds a special case for the initial "reviewers" transactions, similar to the existing special case for "projects" transactions.
Although these transactions are redudnant in the web view since you can see the information clearly on the page, they're more reasonably useful in mail.
Test Plan: {F5168838}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12118
Differential Revision: https://secure.phabricator.com/D18542
Summary: Create a diff page, new UI
Test Plan: Create a diff from page
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18529
Summary: This simplifies EditEngine pages in general by removing the dual header, and extending to allow setting of a custom PHUIHeaderView if needed (like settings).
Test Plan:
Review all settings pages, review task, project pages. This should all be fine, but is a big change maybe some layouts I'm not considering. Tested these all mobile, destkop as well.
{F5166181}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18527
Summary: Updates settings panel UI for new white box, cleans up other various UI nitpicks.
Test Plan: Click through each setting that had a local setting page. Edit Engine pages will follow up on another diff.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18526
Summary: Adds a `MenuName` method to applications that `ProfileMenuItem` uses instead of the application name if set. This improves the home/menu/new user experience at little cost. Also renamed the label from Applications to Favorites, since this menu gets altered to provide more than just applications. This also allows instances to set back to Maniphest if they so choose. Overall I think this direction resolves 95% of my concerns, with maybe a small potential downside which I don't really anticipate. We already name Dashboard panels by their object, and that hasn't really caused confusion. I think these links are similar. I click 'Tasks' and get presented a list of my tasks from Maniphest.
Test Plan: Review each of the name changes as a default new install and a modified install.
Reviewers: epriestley, amckinley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18524
Summary: Simplifies the Repository Management pages to the new fixed column layout. I've also moved "Status" into the Basics page, which feels better, and moved "Documentation" as a nav item to a button in the header. This removed "action list" and "curtain view" from the management panels and uses the new bits from Config/Phacility. Undecided if the icons should stay or go for the nav. Left them in for Diffusion. I want to update the EditEngine pages to display in this UI and not leave the portal, but I haven't dug into that this page. I'm a bit worried it will not easily be possible.
Test Plan:
Generate a svn, git, hg repository, test each of the new pages and each of the new buttons. Activate, deactivate, etc.
{F5164674}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18523
Summary: Ref T12819. Adds storage and indexing for the Ferret engine to Differential.
Test Plan: Ran `bin/search index D123 --force`, saw indexes appear in database. No UI/user impact yet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18540
Summary: Ref T12819. "Relevance" here just means "how many of your search terms are present in the title?" but that's about the best we can do anyway.
Test Plan: Indexed tasks "A B", "A Z", "Z B", and "Z Z" (all with "A B" in comments). Searched for "A B". Got results ranked in the listed order, with "A B" as the most relevant hit for query "A B".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18539
Summary:
This is a full UI pass at a cleaner "Config" application. The main idea is to simplify the UI, center it, and have a different feel than other UI, a sort of "manage" UI theme for objects with loads of settings. Also adds a new minimalistic "WHITE_CONFIG" box type which may get re-used in Diffusion settings. This is a 90% pass, I'll have a few follow up diffs. Specifically:
- Build breadcrumbs as a flexible UI to go into headers.
- One click ObjectItemView option, for hover states.
- Sidenav doesn't always select (AphrontFilter issue)
- Mobile touchups, though it's pretty reasonable.
Test Plan:
Click through every page here, edit options, see new navigation UI. Test a few various setup issue layouts including fatals.
{F5163228}
{F5163229}
{F5163230}
{F5163231}
{F5163232}
{F5163233}
{F5163234}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D18519
Summary: Ref T12819. Move these out of the core engine into the Ferret engine. In the future different applications can define different functions, like "summary:..." or whatever. This may get more formalization when I possibly do "author:" and such some time down the road.
Test Plan: Searched for "title:...". Searched for "dog:...", got a useful error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18536
Summary:
Ref T12819. Push more of the magic `' '` stuff into the engine and simplify calls to ngram construction.
Also fixes a bug where a task with title "apple banana" and description "cherry doughnut" could match query "banana cherry" by separating separate term segments with newlines instead of spaces.
Test Plan:
- Indexed some objects.
- Searched (term, substring, quoted terms).
- Viewed index in database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18534
Summary: Ref T12819. Earlier I separated some ngram code into an "ngram engine" hoping to share it across the simple Ngrams stuff and the full Ferret stuff, but they actually use slightly different rules. Just pull more of this stuff into FerretEngine to reduce the number of moving pieces and the amount of code duplication.
Test Plan: Searched for terms, rebuilt indexes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18533
Summary: Fixes T12975. This logic didn't deal with PolicyException correctly.
Test Plan: {F5167549}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12975
Differential Revision: https://secure.phabricator.com/D18537
Summary: Custom icons here aren't being set. Also use more standard `tt` UI.
Test Plan: Set an icon, see set Icon.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18522
Summary: See PHI46. The `core:` function means "find results in either the title or body, but not other auxiliary fields like comments".
Test Plan: Searched for text present in the title (yes), body (yes), and comments (no) with the `core:...` prefix.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18514
Summary:
Ref T12819. Some of the extensions "enrich" the document (adding more fields or relationships), while others "index" it (insert it into some kind of index for later searching).
Currently, these are all muddled under a single "index" phase. However, the Ferret extension cares about fields and relationships which other extensions may add.
Split this into two phases: "enrich" adds fields and relationships so other extensions can read them later if they want. "Index" happens after the document is built and has all the fields and relationships.
The specific problem this solves is that comments may not have been added to the document when the Ferret extension runs. By moving them to the "enrich" phase, the Ferret engine will be able to see and index comments.
Test Plan: Ran `bin/search index ...`, grepped for `indexFulltextDocument`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18513
Summary: Implements a new mobile view thats more fullscreen, not boxed, so more space. Fixes issues with mobile tables when scrolling overflowed content.
Test Plan: Test home, branch, tags, code, file browse, graph, compare, history, readme, open revisions, owners.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18505
Summary: Visually selects the button if blame is on.
Test Plan: Turn blame on and off in Diffusion on a file.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18504
Summary:
Ref T12819. Adds (hacky, hard-coded) field support (for now, only for "title").
I've written this so `title:quick ferret` is the same as `title:quick title:ferret`. I think this is what users probably mean.
You can do the other thing as `ferret title:quick`, or `title:quick all:ferret`.
Test Plan: Searched for `title:x`, `title:"x"`, `title:~"x"`, etc. Searched for "garbage:y", got an exception since that's not a recognized function. Searched for `title:x y`, saw both do title search.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18503
Summary:
Ref T12819. Supports negating search terms, e.g. "apple -honeycrisp".
When negating a term, we're a little more strict about what can match (that is, what can //prevent// a document from being returned) since it's easy for a user to type "apple -honeycrisp -honey -crisp -crispies -olcrispers -honeyyums" to keep refining their search, but hard/impossible to split apart an overboard term.
Test Plan:
- Ran `apple -smith`, `apple -"granny smith"`, etc.
- Verified `phone -tact` does not exclude `phone contact`.
- (In theory, `phone -~tact` would, but the parser currently doesn't support this, and I'm not champing at the bit to add support.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18502
Summary:
Ref T12819. Distinguishes between "term" queries and "substring" queries, and tries to match them correctly most of the time. For example:
- `example` matches "example", obviously.
- `~amp` matches "example", but `amp` does not.
- `examples` matches "example" through stemming.
- `"examples"` does not match "example" (quoted text does not stem).
- `"an examp"` does not match "an example" (quoted text is still term text).
- `~"an examp"` matches "an example" (quoted, substring-operator text uses substring search).
Test Plan: Ran searches similar to the above, they seemed to do what they should.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18500
Summary:
Ref T12819. Depends on D18492. Instead of passing a raw query into the Query layer, parse it first.
This allows the query layer to figure out which parts should be substring vs term match, and would allow the SearchEngine layer to do `author:...` eventually by picking it out before sending it to the Ferret engine.
Test Plan: Ran some Ferret queries. They work like before, except that nonsense like `-+"quack"` raises an exception now.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18499
Summary:
Ref T12819. Ferret currently does substring search, but this is not the default mode users expect: when you search for the "RICO" act, you do not expect to find documents containing "apRICOt" even though "RICO" is a substring.
To support term search, index the corpus as a list of terms with puncutation removed and whitespace normalized so the engine can match against it.
Test Plan:
Ran `storage upgrade`, ran `search index`, saw sensible database results:
```
rawCorpus: This is the task description.
Hark! Whom'st'dve eaten this "food" shall surely ~perish~?? #blessed
normalCorpus: thi the task descript hark whom dve eaten food shall sure perish bless
termCorpus: This is the task description Hark Whom'st'dve eaten this food shall surely perish blessed
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18498
Summary:
Ref T12819. This addresses two issues:
- One practical issue is that right now, if you search for "dog cat", and they appear in different fields (for example, "dog" appears ONLY in the title, while "cat" appears ONLY in a comment) we won't find the document. This is somewhat rare -- usually, if "dog" appears in the title, it's also repeated in the description -- but I think clearly a bug. To attack this, start automatically creating a virtual "ALL" field with the full document text which we'll use as the primary thing we match against.
- For fields which may occur more than once -- today, only comments -- aggregate them all into one big "all of the text" row instead of writing one row per comment. This partly addresses the first point ("dog" in one comment and "cat" in a different comment won't be found) and partly makes some of the query gymnastics easier.
Test Plan:
Ran `bin/storage upgrade`, ran `bin/search index <Txxx>`, saw sensible corpus values in the database:
```
mysql> select * from maniphest_task_ffield\G
*************************** 1. row ***************************
id: 3
documentID: 1981
fieldKey: full
rawCorpus: This is the task title
This is the task description.
normalCorpus: thi the task titl
thi the task descript
*************************** 2. row ***************************
id: 4
documentID: 1981
fieldKey: titl
rawCorpus: This is the task title
normalCorpus: thi the task titl
*************************** 3. row ***************************
id: 5
documentID: 1981
fieldKey: body
rawCorpus: This is the task description.
normalCorpus: thi the task descript
3 rows in set (0.00 sec)
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18497
Summary:
See PHI47. When users copy/paste a wall of text into a project tokenizer, we can end up performing a very large number of JOINs.
These JOINs seem okay locally and on `secure`, but the install in PHI47 reports hitting issues.
Since these queries are almost certainly illegitimate (I think no one uses 5+ words to find a project), just limit the search to the 5 longest tokens.
Note that typing 6 tokens will still almost always work, since the UI does additional filtering. However, if you have 100+ projects named "a b c d e ..." and search for "a b c d e z", you may not hit it. This is so degenerate that it's hard to imagine any users encountering it.
This is a stopgap fix, I'll file something longer-term as a followup.
Test Plan: Used `/typeahead/class/PhabricatorProjectDatasource/` to run queries. Saw the same results with shorter query plans for all reasonable queries.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18506
Summary: Only for grey buttons, but can expand. Sets a selected class.
Test Plan: Review new changes in UIExamples.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18501
Summary:
Ref T2543. The type on these got changed by accident, it should be "string" (crazy nonsense, compatible) not "int" (sensible, not compatible).
(New API uses sensible strings like "accepted" only.)
Test Plan: Called `differential.query` from web UI, saw `"2"` and similar statuses.
Reviewers: chad, jmeador, lvital
Reviewed By: jmeador, lvital
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18493
Summary:
Ref T2543. When called from the UI to build the dropdown, there's no Editor, since we aren't actually in an edit flow.
This logic worked for actually performing the edits, just not for getting the option into the dropdown.
Test Plan: Used the dropdown to close an "Accepted" revision which I authored.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18490
Summary: This removes the redundant "Account" label and item, and just keeps the page better aligned.
Test Plan: Review personal settings
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18489
Summary:
Ref T12819. Two minor improvements from live data:
- Tokenize in a UTF8-aware way.
- When one document fails to index, kill the transaction explicitly (rather than leaving it hanging) so we don't cause other failures later.
Test Plan: Created some UTF8 documents locally, indexed them, got clean results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18487
Summary: This panel just gets super tall at 15 now that date is on it's own line.
Test Plan: Reload panel, count to 10.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18486
Summary:
Ref T12819. I gave this stuff a sweet code name because all the terms related to "fulltext" and "search" already mean 5 different things. It, uh, ferrets out documents for you?
I'm building this to work a lot like the existing ngram index, which seems to work pretty well. If this sticks, it will auto-resolve the join issue (in T12443) by letting us do the entire thing locally in a JOIN and thus dodge a lot of mess.
This index gets built alongside other indexes, but only shows up in the UI if you have prototypes enabled. If you do, it appears under the existing fulltext field in Maniphest. No existing functionality is affected or disrupted.
NOTE: The query engine half of this is still EXTREMELY primitive, and this probably performs worse than the existing field for now. If this doesn't show obvious signs of being awful on `secure` I'll improve that in followup changes.
Test Plan:
Indexed my tasks, ran some simple queries, got the results I wanted, even for queries "ko", "k", "v0.1".
{F5147746}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819, T12443
Differential Revision: https://secure.phabricator.com/D18484
Summary: Fixes T8944. Adds a small dot if notification is new along with color. Goes away when clicked. Increased font and padding for readability.
Test Plan: Send notifications from test account, review them in menu, application search, and in real-time display.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T8944
Differential Revision: https://secure.phabricator.com/D18485
Summary: Fixes whatever task is tracking this junk, if one exists. Don't prompt unless there's a security issue.
Test Plan:
- Generated notifications from a test account.
- Clicked "Mark All" from dropdown menu, no prompt.
- Clicked "Mark All" from notifications screen, no prompt.
- Command-Clicked "Mark All" from dropdown menu to open in new window, got normal prompt.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18483
Summary: 50% more line, no additional cost! Order Now! Operators are standing by.
Test Plan: Blame a file
Reviewers: epriestley, avivey
Reviewed By: avivey
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18481
Summary: Just deletes the view code until I have time to better plan this out, or just not ship.
Test Plan: Visit Phame post on public logged out page, view count doesnt cause transaction fatal.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18475
Summary: These come out of the database as strings (see T12678), force them to integers for the API.
Test Plan: Called `transaction.search`, got integers in JSON instead of strings.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18476
Summary: My fake data was 100%, and not all tables have full revision history. This leads to a broken table. Instead check if we have //any// revisions at all, then always show the column, with or without a link inside.
Test Plan: going on a limb this is the correct fix and test on secure... again ...
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18474
Summary: There is still some layout issues with revisions, so I've tested it better and moved it to it's own column
Test Plan: Fake in some revision data, test various sizes and shapes.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18473
Summary:
Ref T5873. This provides paths and line numbers for inline comments.
This is a touch hacky but I was able to keep it mostly under control.
Test Plan:
- Made inline comments.
- Called API, got path/line information.
{F5120157}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5873
Differential Revision: https://secure.phabricator.com/D18469
Summary: Minor cleanup, this logic can be simpler. Instead of special-casing inlines as having an effect if the have a comment, just consider any transaction with a comment to have an effect. I'm fairly certain this is always true.
Test Plan: Made inlines, tried to submit empty comments. Behavior unchanged.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18468
Summary:
Ref T5873. See PHI14. I don't want to just expose internal transaction data to Conduit by default, since it's often: unstable, unusable, sensitive, or some combination of the three.
Instead, let ModularTransactions opt in to providing additional data to Conduit, similar to other infrastructure. If a transaction doesn't, the API returns an empty skeleton for it. This is generally fine since most transactions have no real use cases, and I think we can fill them in as we go.
This also probably builds toward T5726, which would likely use the same format, and perhaps simply not publish stuff which did not opt in.
This doesn't actually cover "comment" or "inline comment", which are presumably what PHI14 is after, since neither is modular. I'll probably just put a hack in place for this until they can modularize since I suspect modularizing them here is difficult.
Test Plan: Ran `transaction.search` on a revision, saw some transactions (title and status transactions) populate with values.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5873
Differential Revision: https://secure.phabricator.com/D18467
Summary:
Ref T5873. See PHI14. This does the basics that are shared across everything (IDs, PHIDs, dates, comments).
It doesn't do types (I think I don't necessarily want to expose internal types over the API?) or transaction-specific data.
In the next change, I'm going to add ways to let ModularTransactions "opt-in" to providing more data to Conduit. I'll use this to flesh out the actual desired transaction types (comments, presumably inline comments) and likely leave the rest as skeletons for now until use cases arise so we don't create a backward compatibility issue (or a security issue!) by exposing tons of internal stuff as public-facing API.
Test Plan:
Ran queries, used paging. Retrieved an edited, deleted, and normal comment.
{F5120060}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5873
Differential Revision: https://secure.phabricator.com/D18466
Summary:
Fixes T12970. This is easier than I expected, and appears to occur in only one place.
This prevents a change from ever generating with an anchor like `#12345678`, which is ambiguous because it may be a comment anchor.
Test Plan: Viewed a revision, saw new `change-xxxyyyzzz` anchors, clicked one, got jumped to the right place.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12970
Differential Revision: https://secure.phabricator.com/D18465
Summary:
Ref T12956. UI changes:
- Administrators get a new `[X] Save as global query` option when saving a query.
- "Edit Queries..." is split into "Personal" and "Global" sections. For administrators, each section can be edited. For non-admins, only the top section can be edited, but any query can be pinned.
A couple notes:
- This doesn't support "pin for everyone by default". New users just get the first query from the bottom set. That seems reasonable for now.
- Reordering is currently a little buggy (it works if you've reordered before, but not if you're reordering for the first time), but I need to migrate before I can fix / test that properly. So that'll get cleaned up in the next change or two.
Test Plan:
- As an admin and non-admin, viewed, edited, disabled, saved-as-personal and saved-as-global various queries.
{F5098581}
{F5098582}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12956
Differential Revision: https://secure.phabricator.com/D18426
Summary:
Ref T12956. Currently, when you visit `/maniphest/` (or any other ApplicationSearch application) we execute the first query in the list by default.
In T12956, I plan to make changes so that personal queries are always first, then global/builtin queries. Without changing the "default query" rule, this will make it harder to have, for example, some custom queries in Differential but still run a global query like "Active" by default. To make this work, you'd have to save a personal copy of the "Active" query, then put it at the top.
This feels a bit cumbersome and this rule is kind of implicit and a little weird anyway. To make this work a little better as we make changes here, add an explicit pinning action, like the one we have in Project ProfileMenus.
You can now explicitly choose a query to make default.
Test Plan:
- Browsed without pinning anything, saw normal behavior.
- Pinned queries, viewed `/maniphest/`, saw a non-initial query selected by default.
- Pinned a query, deleted it, nothing exploded.
{F5098484}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12956
Differential Revision: https://secure.phabricator.com/D18422
Summary:
See PHI42. Currently, `maniphest.search` incorrectly applies this default (group by priority) to all queries via Conduit.
The correct behavior is to apply no grouping constraint.
I think this is also a reasonable general behavior, and the current code seems to date from D6960 in 2013 and didn't seem particularly carefully considered.
This is a minor compatibility break -- saved queries which are more than 4 years old might change their group behavior. I'll note this in the change logs but expect essentially no one to be affected.
Test Plan: Ran a `maniphest.search` Conduit call and observed the underlying query. Before this change, it executed `ORDER BY priority, id`. After this change, it correctly executed `ORDER BY id` only.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18459
Summary: Using icons and dropdown buttons without text looks a little wonky, this resets the CSS a bit.
Test Plan: Review button with icon and text, just icon, just test, and dropdowns.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18461
Summary:
See PHI39. This adds support for editing parents and subtasks of a task via Conduit.
It might be nice to tie this into the `PhabricatorObjectRelationship` stuff eventually, but I think we'd effectively end up in the same place anyway in terms of what the API looks like.
Test Plan: {F5116163}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18456
Summary: Fixes T12792. Expands the Notifications to "web, desktop, both, or none" for real-time notifications in settings.
Test Plan: Test with "test notifications" button, and while logged into two accounts with each of the 4 settings.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T12792
Differential Revision: https://secure.phabricator.com/D18457
Summary: I missed an anchor tag here, adds it back
Test Plan: View blame, click a previous version of the file, click Back to HEAD link.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18451
Summary: Ref T12824, adds more information to the blame view, exposes date, commit summary, lighter colors.
Test Plan:
Review many diffs with and without blame on.
{F5111758}
{F5111759}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T12824
Differential Revision: https://secure.phabricator.com/D18452
Summary: Fixes T12969. If you disable "Home" but leave it at the top, we still load it.
Test Plan: Disabled "Home". Move Dashboard into first position, see correct home layout.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T12969
Differential Revision: https://secure.phabricator.com/D18455
Summary: From Z1336, we don't currently document anywhere how the default dashboard works. I should also update the copy in the UI. Ref T12969
Test Plan: regenerate docs, read carefully
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T12969
Differential Revision: https://secure.phabricator.com/D18454
Summary:
See PHI36. APCu originally had `apc_` methods, but at some point dropped these and only provides `apcu_` methods.
When the `apcu_` method is present, use it. It may not be present for older versions of APCu, so keep the fallback.
Test Plan:
- With modern APCu, clicked "Purge Caches" in Config > Caches.
- Before: fatal on bad `apc_clear_caches` call.
- After: Valid cache clear.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18449
Summary: This adds a very very basic view count to Phame, so bloggers can get some idea which posts are more popular than others. Anything more than this I think should be Facts or Google Analytics.
Test Plan: Write a new post, see post count. Reload page, post count goes up. Archive post, post count stays the same.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18446
Summary: Ref T12964. This feels like a cheat, but works well. Just redirect the user back to the form they came from instead of to the key page.
Test Plan: Add a key to a user profile, add a key to an Alamanac device. Grep for PhabricatorAuthSSHKeyTableView and check all locations.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12964
Differential Revision: https://secure.phabricator.com/D18445
Summary: Moves browseFile to single column, implements Owners as a list under the file (and now directory as well), improved information listed in Owners, and moves actions into the Diffusion action bar instead of the header.
Test Plan:
Test browsing directories, files, text, images, binaries, enabling blame. Mobile and desktop.
{F5111045}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18448
Summary: Adds some basic UI for open / closed state when viewing a list of branches in Mercurial. Fixes T12838
Test Plan: Close and open branches, view list.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12838
Differential Revision: https://secure.phabricator.com/D18447
Summary: Better table layouts here for branches view
Test Plan: Test git, hg repositories. See column go away.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18444
Summary: This is in the crumbs, but a little hidden. Puts branch name at the top of the browse table header.
Test Plan: Review a few branchs, change branch, see new name.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18441
Summary: Adds an icon for default branch, status for branch status
Test Plan: Review `hg` and `git` repositories, change default branch, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18443
Summary:
Ref T12966. See that task for a description and reproduction steps.
If you put Phabricator in a master/replica configuration and then restart it, we may fatal here if the master is unreachable. Instead, we should survive setup checks.
Test Plan: Put Phabricator in a master/replica configuration, explicitly disabled the master by misconfiguring the port, restarted Phabricator. Before: fatal; after: login screen in read-only mode.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12966
Differential Revision: https://secure.phabricator.com/D18442
Summary:
Ref T12965. See that task for discussion, and PHI36 for context.
This sweeps the fatal under the rug by skipping it, letting things move forward for now.
Test Plan: Followed instructions in T12965, got a read-only recovery after restart instead of a fatal.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12965
Differential Revision: https://secure.phabricator.com/D18440
Summary: Simplifies the page, adds base support for PHUITwoColumn fixed from Instances (which I'll delete css there).
Test Plan:
click on every settings page, UI seems in tact, check mobile, desktop, mobile menus.
{F5102572}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18436
Summary: Moves the method up to DiffusionController, so it can be more universally used. Also now center aligns tabs on mobile. Still todo, get search nicely toggled on mobile
Test Plan: Test mobile, desktop. Test search from home, from browse, and browsing a specific path.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18432
Summary: Moving this down the the "bar" to allow pattern search on home. Rebuilds the mobile layout a little.
Test Plan:
Test actions on mobile, desktop, tablet.
{F5100460}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18431
Summary: Roughs this in a little, kinda basic. Allows for grouping results by page. A bit better on mobile. Would like more content return from conduit though.
Test Plan:
Test `CMS`, `cms`, and `OMGLOLWTFBBQ`, desktop and mobile
{F5099081}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18429
Summary: This is only on browse pages, but I think could be global (home) also. Moves it from a button, field, to just a field.
Test Plan:
Review search on desktop, mobile.
{F5098886}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18428
Summary: Removing this cleanly in event we want to put it back later. 99% of these cases are likely workable either by command line or the typeahead. Will gauge feedback if users notice.
Test Plan: Reload page, perform file grep search.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18425
Summary: I wrote "free" since "test" only give us 7 days to confirm the issue, but "free" no longer exists and "test" should be good enough.
Test Plan: o_O
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18423
Summary: Getting to the straight browse view went away, this adds a link back. I'll look at more long term solution for getting to grep search.
Test Plan: Click on header, get take to browse view.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18421
Summary: Ref T12956. No real behavioral changes here, just slightly more modern code.
Test Plan: Reviewed named queries in Maniphest and "Edit Queries...".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12956
Differential Revision: https://secure.phabricator.com/D18420
Summary:
Ref T2543. This updates and migrates the status change transactions:
- All storage now records the modern modular transaction ("differential.revision.status"), not the obsolete non-modular transaction ("differential:status").
- All storage now records the modern constants ("accepted"), not the obsolete numeric values ("2").
Test Plan:
- Selected all the relevant rows before/after migration, data looked sane.
- Browsed around, reviewed timelines, no changes after migration.
- Changed revision states, saw appropriate new transactions in the database and timeline rendering.
- Grepped for `differential:status`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18419
Summary:
Ref T2543. Rewrites all the storage to use constants.
Note that transactions still use legacy values, I'll migrate and update them separately.
Test Plan:
- Ran migration.
- Browsed around, changed revision states, viewed dashboard, etc.
- Selected `DISTINCT()` and `GROUP_CONCAT()` of the `status` field in the database, saw sane/expected before and after values.
- Verified that old Conduit methods still return numeric constants for compatibility.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18418
Summary: Ref T2543. All writers now write modern statuses. Make all readers explicit about whether they are reading modern or legacy statuses, so I can swap the storage format.
Test Plan:
- Grepped for `getStatus()`, scanned the list. Other applications have methods with this name so it's possible I missed something.
- Browed around, changed revision statuses.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18417
Summary:
Ref T2543. These are the last `ArcanistDifferentialRevisionStatus` callsites.
This removes the very old legacy `precommitRevisionStatus` field, which has no other readers. This was obsoleted by the `CLOSED_FROM_ACCEPTED` stuff, but retained for compatibility.
Test Plan:
- Poked these with the test console, although they're a little tricky to be sure about.
- Grepped for `ArcanistDifferentialRevisionStatus`, no more hits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18416
Summary: Ref T2543. Update these for the modern stuff.
Test Plan: Created a new revision, got a revision in the right state ("Needs Review"). Accepted, planned, requested, abandoned revision; state transitions looked good.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18415
Summary: Ref T2543. Swaps these over to modern constants.
Test Plan: Viewed dashboard, no chagnes to bucketing.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18414
Summary: Ref T2543. This cleans up all the "when no one is rejecting/blocking and someone accepted, mark the revision overall as accepted" logic to use more modern status stuff instead of `ArcanistDifferentialRevisionStatus`.
Test Plan:
- Updated revisions, saw them go to "Needs Review".
- Accepted, requested changes to revisions.
- Updated one with changes requested, saw it go to "needs review" again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18413
Summary:
Ref T2543. This cleans up a couple of remaining rough edges:
- We could do an older TYPE_ACTION "close" via the daemons.
- We could do an older TYPE_ACTION "close" via `arc close-revision`, explicitly or implicitly in `arc land`, via API (`differential.close`).
- We could do an older TYPE_ACTION "rethink" ("Plan Changes") via the API, via `arc diff --plan-changes` (`differential.createcomment`).
Move these to modern modular transactions, then get rid of all the validation and application logic for them. This nukes a bunch of `ArcanistDifferentialRevision::...` junk.
Test Plan:
- Used `bin/repository reparse --message rXYZ...` to reparse a commit, closing a corresponding revision.
- Used `differential.close` to close a revision.
- Used `differential.createcomment` to plan changes to a revision.
- Reviewed transaction log for full "closed by commit" message (linking to commit and mentioning author).
- Grepped for `::TYPE_ACTION` to look for remaining callsites, didn't find any.
- Grepped for `differential.close` and `differential.createcomment` in `arcanist/` to look for anything suspicious, seemed clean.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18412
Summary:
Ref T2543. Converts the TYPE_STATUS transaction (used to render "This revision now requires changes to proceed.", "This revision is accepted and ready to land.", etc) to ModularTransactions.
Also, continue consolidating all the status-related information (here, more colors and icons) into a single place. By the end of this, we may learn that NEEDS_REVIEW uses //every// color.
Test Plan:
Reviewed old status transactions (unchanged) and created new ones (looked the same as the old ones).
(I plan to migrate all of these a few diffs from now, around when I change the storage format.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18410
Summary: Ref T2543. Cleans up some more references to ArcanistDifferentialRevisionStatus, moving toward getting rid of it completely.
Test Plan: Planned changes, requested review, inspected the "close" one since it isn't trivial to trigger.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18408
Summary: Ref T2543. Now that the integer status constants are banished to the internals, we can expose status information from "differential.revision.search".
Test Plan:
Searched for revisions.
{F5093873}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18400
Summary: Ref T2543. I converted this condition the wrong way, missing a `!`. I'll cherry-pick this to `stable`.
Test Plan: No more "Reopen Revision" action available on open revisions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18399
Summary:
Ref T2543. Ref T10967. This isn't precisely related to "draft" status, but while I'm churning this stuff anyway, get rid of the old double writes to clean the code up a bit.
These were added in T10967 to make sure the migration was reversible/recoverable, but we haven't seen any issues with it in several months so I believe they can now be removed safely. Nothing has read this table since ~April.
Test Plan: Took various review actions on revisions (accept, reject, resign, comment, etc). If this change is correct, there should be no visible effect.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967, T2543
Differential Revision: https://secure.phabricator.com/D18398
Summary:
Ref T2543. I believe there have been no upstream callsites of this method since D1646, in February 2012.
The method works, and we can revert this if needbe, but this seems like a good time to remove support.
Test Plan: Grepped for `differential.find`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18397
Summary: Ref T2543. All callsites are now in terms of `withStatuses()`.
Test Plan:
- Called `differential.query` and `differential.find` from Conduit API.
- Grepped through all `withStatus()` callsites.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18396
Summary: Ref T2543. Several queries want only open revisions. Provide a tailored, non-legacy way to issue that query.
Test Plan: Viewed some of these callsites (e.g., "Similar open revisions affecting these files"), saw only open revisions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18395
Summary:
Ref T2543. This updates the UI control in the web UI. Also:
- This implicitly makes this queryable with the API (`differential.revision.search`); it previously was not.
- This does NOT migrate existing saved queries. I'll do those in the next change, and hold this until it happens.
- This will break some existing `/differential/?status=XYZ` links. For example, `status=open` now needs to be `status=open()`. I couldn't find any of these in the upstream, and I suspect these are rare in the wild (users would normally link directly to saved queries, not use URI query construction).
Test Plan: {F5093611}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18393
Summary:
Ref T2543. This adds a tokenizer, similar to the Maniphest tokenizer, so the hard-coded `<select />` control in Differential ApplicationSearch can be replaced with a more flexible control that handles the addition of new statuses with more grace.
This only adds the new datasource.
Test Plan: Used `/typeahead/class/` to preview the behavior of the new datasource.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18392
Summary:
Ref T12961. Fixes T4416. Currently, for observed Mercurial repositories, we build a working copy with `pull -u` (for "update").
This should be unnecessary, and we don't do it for hosted Mercurial repositories. We also stopped doing it years ago for Git repositories. We also don't clone Mercurial repositories with a working copy.
It's possible something has slipped through the cracks here so I'll hold this until after the release cut, but I believe there are no actual technical blockers here.
Test Plan:
- Observed a public Mercurial repository on Bitbucket.
- Let it import.
- Browsed commits, branches, file content, etc., without any apparent issues.
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T12961, T4416
Differential Revision: https://secure.phabricator.com/D18390
Summary:
Ref T12961. In Mercurial, it's possible to have "subrepos" which may use a different protocol than the main repository.
By putting an SSH repository inside an HTTP repository, an attacker can theoretically get us to execute `hg` without overriding `ui.ssh`, then execute code via the SSH hostname attack.
As an immediate mitigation to this attack, specify `ui.ssh` unconditionally. Normally, this will have no effect (it will just be ignored). In the specific case of an SSH repo inside an HTTP repo, it will defuse the `ssh` protocol.
For good measure and consistency, do the same for Subversion and Git. However, we don't normally maintain working copies for either Subversion or Git so it's unlikely that similar attacks exist there.
Test Plan:
- Put an SSH subrepo with an attack URI inside an HTTP outer repo in Mercurial.
- Ran `hg up` with and without `ui.ssh` specified.
- Got dangerous badness without `ui.ssh` and safe `ssh` subprocesses with `ui.ssh`.
I'm not yet able to confirm that `hg pull -u -- <uri>` can actually trigger this, but this can't hurt and our SSH wrapper is safer than the native behavior for all Subversion, Git and Mercurial versions released prior to today.
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T12961
Differential Revision: https://secure.phabricator.com/D18389
Summary: Rewords the document to note new location and status table.
Test Plan: Read, reread.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18387
Summary: Fixes T12832. Adds a basic table (not paginated?) to view tracking and autoclose status.
Test Plan:
Review a large repository (Krita) with setting various states of tracking and autoclose.
{F5092117}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12832
Differential Revision: https://secure.phabricator.com/D18386
Summary: See PHI31. The "Accepted Older Revision" icon is (more reasonably) bluegrey, but that rule spilled over here where it doesn't make much sense. "Requested Changes to Prior Diff" remains in effect across updates, but the coloration implies otherwise.
Test Plan:
"Requested Changes to This Diff" (unchanged):
{F5092019}
"Requested Changes to Prior Diff" (now red, previously bluegrey):
{F5092020}
Note that the icons are different so this is technically colorblind-safe, and it's normally not important to distinguish between these two reds anyway.
Reviewers: chad, lvital
Reviewed By: lvital
Subscribers: lvital
Differential Revision: https://secure.phabricator.com/D18385
Summary:
Fixes T12948. See that task for substantial discussion and context. Briefly:
- This workflow is very old, and won't work for large (>2GB) files.
- This workflow has become more dangerous than it once was, and can fail in several ways that delete data and/or make recovery much more difficult (see T12948 for more discussion).
- This was originally added in D6068, which is a bit muddled, but looks like "one install ran into a weird issue so I wrote a script for them"; this would be a Consulting/Support issue and not come upstream today. I can't identify any arguments for retaining this workflow there, at least.
Test Plan:
- Grepped for `files purge`, got nothing.
- Grepped for `purge`, looked for anything that looked like instructions or documentation, got nothing.
I don't recall recommending anyone run this script in many years, and didn't even remember that it existed or what it did when T12948 was reported, so I believe it is not in widespread use.
Reviewers: joshuaspence, chad
Reviewed By: joshuaspence
Maniphest Tasks: T12948
Differential Revision: https://secure.phabricator.com/D18384
Summary: Fixes T12958. Adds a success message when card is added, also switches to use radio buttons for clarity. Updated redirect uri for deleting methods as well.
Test Plan:
Add cards, remove cards.
{F5091084}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12958
Differential Revision: https://secure.phabricator.com/D18381
Summary: Makes dialogs a little wider, form dialogs a lot wider (space controls). Also cleans up Passphrase dialogs. Fixes T12833. I think forms probably need to move to tables for better layout flexibility like veritical alignment.
Test Plan: Passphrase create, edit, etc. Other dialogs.
Reviewers: epriestley
Subscribers: Korvin
Maniphest Tasks: T12833
Differential Revision: https://secure.phabricator.com/D18382
Summary:
Ref T2543. Currently, Differential uses a set of hard-coded query filters (like "open" and "closed") to query revisions by status (for example, "open" means any of "review, revision, changes planned, accepted [usually]").
In other applications, like Maniphest, we've replaced this with a low level list of the actual statuses, plus higher level convenience UI through tokenizer functions. This basically has all of the benefits of the hard-coded filters with none of the drawbacks, and is generally more flexible.
I'd like to do that in Differential, too, although we'll need to keep the legacy maps around for a while because they're used by `differential.find` and `differential.getrevision`. To prepare for this, pull all the legacy stuff out into a separate class. Then I'll modernize where I can, and we can get rid of this junk some day.
Test Plan: Grepped for `RevisionQuery::STATUS`. Ran queries via Differential UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18343
Summary:
Ref T2543. Add `isPublished()` to mean: exactly the status 'closed', which is now interally called 'published', but still shown as 'closed' to users.
We have some callsites which are about "exactly that status", vs "any 'closed' status", e.g. including "abandoned".
This also introduces `isChangePlanned()`, which felt less awkward than `isChangesPlanned()` but more consistent than `hasChangesPlanned()` or `isStatusChangesPlanned()` or similar.
Test Plan: `grep`, loaded revisions, requested review.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18341
Summary:
Ref T2543. Further consolidates status management into DifferentialRevisionStatus.
One change I'm making here is internally renaming "CLOSED" to "PUBLISHED". The UI will continue to say "Closed", at least for now, but this should make the code more clear because we care about "is closed, exactly" vs "is any closed status (closed, abandoned, sometimes accepted)". This distinction is more obvious as `isClosed()` vs `isPublished()` than, e.g., `isClosedWithExactlyTheClosedStatus()` or something. I think "Published" is generally more clear, too, and more consistent with modern language (e.g., "pre-publish review" replacing "pre-commit review" to make it more clear what we mean in Git/Mercurial).
I've removed the IN_PREPARATION status since this was just earlier groundwork for "Draft" and not actually used, and under the newer plan I'm trying to just abandon `ArcanistDifferentialRevisionStatus` entirely (or, at least, substantially).
Test Plan:
- Viewed revisions.
- Viewed revision list.
- Viewed revisions linked to a task in Maniphest.
- Viewed revision graph of dependencies in Differential.
- Grepped for `COLOR_STATUS_...` constants.
- Grepped for removed method `getRevisionStatusIcon()` (no callsites).
- Grepped for removed method `renderFullDescription()` (one callsite, replaced with just building a `TagView` inline).
- Grepped for removed method `isClosedStatus()` (no callsites after other changes).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18340
Summary:
Ref T2543. These are currently numeric values, like "0" and "3". I want to replace them with strings, like "accepted", and move definitions from Arcanist to Phabricator.
To set the stage for this, reduce the number of callsites where Phabricator invokes `ArcanistDifferentialRevisionStatus`.
This is just the easy ones. I'll hold this until the release cut.
Test Plan:
- Called `differential.find`.
- Called `differential.getrevision`.
- Called `differential.query`.
- Removed all reviewers from a revision, saw warning.
- Abandoned the no-reviewers revision, no more warning.
- Attached a revision to a task to get it to show the state icon with the status on a tooltip.
- Viewed revision bucketing on dashboard.
- Used `bin/search index` to reindex a revision.
- Hit the "Land Revision" endpoint.
I didn't explicitly test these cases:
- Doorkeeper Asana integration, since setup takes a thousand years.
- Disambiguation logic when multiple hashes match, since setup is also very involved.
- Releeph because it's Releeph.
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18339
Summary: Just a few more.
Test Plan: Edit Picture, see new image, choose image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18370
Summary: Fixes the icon bug and builds a basic examples page for future testing.
Test Plan: Visit uiexampls and various types of info views.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18356
Summary: I'd like to use red buttons.
Test Plan: Set a button to red in InfoView, see red button.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18352
Summary: Just moves this because I can never easily find it.
Test Plan: Check UIExamples
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18348
Summary: Fixes T12952. This never work AFAIK, so resolves this mis-information. See T4411 for follow up.
Test Plan: Click on policy for a diff, no longer see text.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12952
Differential Revision: https://secure.phabricator.com/D18349
Summary: If we don't have any panels, just an action list, we want to hide the entire box on mobile since it's just an empty line.
Test Plan: Review Owners, Differential curtains on mobile, desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18350
Summary: Moves Settings to use a normal side navigation vs. a two column side navigation. It also updates Edit Engine to do the same, but I don't think there are other callsites. Added a consistent header for better clarification if you were editng your settings, global settings, or a bot's settings.
Test Plan: Test each page on a personal account, create global settings, test each page there, create a bot account, and test each page on the bot account. Anything else?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18342
Summary: We don't ever set fluid, since it already is fluid, also no CSS. Add an actual fixed version.
Test Plan: For use in Instances.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18336
Summary: Rather than have tabs live in two column view, sometimes like `admin` we'll want a global set of tabs that work well with all layouts and crumbs.
Test Plan:
I tested this in an upcoming diff for instances.
{F5080228}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18332
Summary: Allows setting on an image here if wanted.
Test Plan: Set a rocket to launch a new instance on rSAAS
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18334
Summary: Ref T12928. Like `v0.1`, terms in the form `yo's` (sequences of two or fewer characters separated by apostrophes) do not get indexed.
Test Plan: {F5078192}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12928
Differential Revision: https://secure.phabricator.com/D18324
Summary: Cursory research indicates that "login" is a noun, referring to a form, and "log in" is a verb, referring to the action of logging in. I went though every instances of 'login' I could find and tried to clarify all this language. Also, we have "Phabricator" on the registration for like 4-5 times, which is a bit verbose, so I tried to simplify that language as well.
Test Plan: Tested logging in and logging out. Pages feel simpler.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18322
Summary:
Fixes T12946. `bin/remove destroy` does not remove working copies: it's more dangerous than usual, and we can't do it in the general (clustered) case.
Print a notification message after destroying a repository.
Test Plan:
- Destroyed a repository, got a hint about the working copy.
- Destroyed a task, things worked normally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12946
Differential Revision: https://secure.phabricator.com/D18313
Summary:
Fixes T12942.
- Adds binary version and path information to {nav Config > Version Information}.
- Replaces old code all over the place with new consolidated code.
Test Plan:
{F5073531}
Also faked some cases of missing binaries, bad versions, etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12942
Differential Revision: https://secure.phabricator.com/D18306
Summary: Fixes T12945.
Test Plan:
Mostly faked this, got a censored error:
```
$ ./bin/repository update R38
[2017-07-31 19:40:13] EXCEPTION: (Exception) Working copy at "/Users/epriestley/dev/core/repo/local/38/" has a mismatched origin URI, "https://********@example.com/". The expected origin URI is "https://github.com/phacility/libphutil.git". Fix your configuration, or set the remote URI correctly. To avoid breaking anything, Phabricator will not automatically fix this. at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryEngine.php:186]
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12945
Differential Revision: https://secure.phabricator.com/D18304
Summary: Additonal option to use newly made images in these views.
Test Plan:
Built an example in UIExamples.
{F5071682}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18299
Summary: We've never used this, and no current plans to.
Test Plan: grep for use cases.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18298
Summary: Moves over some of the icons we build for SAAS that can be useful for projects to. Also make builtin list dynamic.
Test Plan: Edit a project image, select a cool sword.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18297
Summary: Adds dropdown carets to buttons more universally that are actually dropdowns.
Test Plan: Differential, Application Search, Diffusion. Mobile and Desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18292
Summary:
In Diffusion, the "Tags" view may read commits which haven't imported or parsed yet, and thus don't have loadable objects.
Most of this logic tests for `if ($commit)`, but the author part did not. Instead, don't render author information if `$commit` is not present.
Test Plan:
- Loaded tags view with commits present.
- Faked `$commit = null;`, loaded tag view, got this instead of a fatal:
{F5068432}
Reviewers: chad, amckinley
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18290
Summary:
Reverts D18276. See PHI18 for discussion. The additional rules here (roughly, "only show the first successful operation") didn't actually work out for the other types of operations.
This is all just figuring out a stopgap, T12935 and other changes should eventually provide real pathways here.
Test Plan: Straight revert.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18281
Summary: Fixes T12929. Sets a create transaction if new.
Test Plan: test a new task over email via command line
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12929
Differential Revision: https://secure.phabricator.com/D18279
Summary:
See PHI18. Third parties can currently define other types of Drydock operations (like "Merge Check" or "Cherry-Pick") but we won't show them in the UI.
This is a simple change which improves third-party support for now. These kinds of operations generally make sense in the upstream, but the pathways to support are longer.
Test Plan:
- Verified that there are no other types of repository operation which we'd want to exclude in the upstream today by reviewing the "Repository Operation" subclasses.
- Will click some buttons in production to make sure this works.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18276
Summary:
Fixes T12893. See also PHI15. This is complicated but:
- In the documentation, we say "register your web devices with Almanac". We do this ourselves on `secure` and in the production Phacility cluster.
- We don't actually require you to do this, don't detect that you didn't, and there's no actual reason you need to.
- If you don't register your "web" devices, the only bad thing that really happens is that creating repositories skips version initialization, creating the bug in T12893. This process does not actually require the devices be registered, but the code currently just kind of fails silently if they aren't.
Instead, just move forward on these init/resync phases even if the device isn't registered. These steps are safe to run from unregistered hosts since they just wipe the whole table and don't affect specific devices.
If this sticks, I'll probably update the docs to not tell you to register `web` devices, or at least add "Optionally, ...". I don't think there's any future reason we'd need them to be registered.
Test Plan:
This is a bit tough to test without multiple hosts, but I added this piece of code to `AlmanacKeys` so we'd pretend to be a nameless "web" device when creating a repository:
```
if ($_REQUEST['__path__'] == '/diffusion/edit/form/default/') {
return null;
}
```
Then I created some Git repositories. Before the patch, they came up with `-` versions (no version information). After the patch, they came up with `0` versions (correctly initialized).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12893
Differential Revision: https://secure.phabricator.com/D18273
Summary: Fixes T12931. Adds a branch selector that's always visible if the repo has commits.
Test Plan:
Test a plain hg, svn, git repository. Test setting a bad default branch. Test a good default branch. Test on desktop, mobile layouts.
{F5058061}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12931
Differential Revision: https://secure.phabricator.com/D18267
Summary:
Ref T12928. The index doesn't work for these, so show the user that there's a problem and drop the terms.
This doesn't fix the problem, but makes the behavior more clear.
Test Plan:
{F5053703}
{F5053704}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12928
Differential Revision: https://secure.phabricator.com/D18254
Summary: This word is not spelled properly.
Test Plan: Read the word.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18250
Summary: Cleans up a bunch of Differential odd/special colors. Adds some basic "highlight" colors instead of pure yellow.
Test Plan: Test each color change in normal and dark modes.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18239
Summary: Gives some strength to name (needed to over-ride new images) and new create copy.
Test Plan: Create a new mock, see proper story in feed.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18246
Summary:
Ref T12922.
- Tell customers where to go at the top.
- Fix a couple minor things (e.g., don't advise users to reproduce on `secure` anymore).
Test Plan: Read carefully.
Reviewers: chad, avivey
Reviewed By: chad, avivey
Maniphest Tasks: T12922
Differential Revision: https://secure.phabricator.com/D18236
Summary:
Ref T12922.
- Remove most mentions to "Contributing Feature Requests".
- Raise the barrier to entry on code contributions.
I'm going to tweak "Bug Reports" in a followup to be more similar to "Feature Requests", but that's a slightly more involved change.
Test Plan: Read new docs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12922
Differential Revision: https://secure.phabricator.com/D18235
Summary: Ref T10769. See PHI8. We have an unconditional logging write which we can skip in read-only mode.
Test Plan:
- Put Phabricator in read-only mode with `cluster.read-only`.
- Called `conduit.ping` via web UI.
- Before: write-on-read-only exception.
- After: good result.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T10769
Differential Revision: https://secure.phabricator.com/D18233
Summary: Fixes T12926. This exists but isn't documented. Document it after the section about webserver setup, since that's probably when you'd want to set it up.
Test Plan: Read carefully, visited `/status/`.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12926
Differential Revision: https://secure.phabricator.com/D18234
Summary: Mostly this is an exercise to clean up our CSS and Celerity processor by making sure all important color decisions are generatable. It's somewhat resonable to use if you don't review code. Posting it up here mostly so I don't lose the work.
Test Plan: Visit lots and lots of pages with dark mode on and off.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18227
Summary: This updates the support document, specifically, scopes down feature requests, updates community links, and other wordsmithing. Unsure where to direct bug reports right now, but we'll have something soon?
Test Plan: Read carefully
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Luke081515.2, Korvin
Differential Revision: https://secure.phabricator.com/D18218
Summary: This spelling can definitely feel a little overplayed at times, but I still think it's a gold standard in spellings of "capabilities".
Test Plan: Felt old and uncool.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18215
Summary: Just some cleanup. Make sure action-bar has consistent space if locate is there or not, hide tabs if repository has no content. Use clone or checkout language depending on SCM. Fixes T12915.
Test Plan:
Test git, hg, svn blank states.
{F5042707}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12915
Differential Revision: https://secure.phabricator.com/D18208
Summary: I guess we have this magical method that tells me if a pager is coming down the render pipe. Huzzah.
Test Plan: Test Branches page in Diffusion, see no pager border.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18202
Summary: This moves the clone details on the Repository Home to a button / dialog. Functionally this is to pull content on the page way up, while giving full space to all the clone options. I think we can build this into some FancyJS if needed, but this seems to clean ui the UI dramatically with little overhead. I don't want to attempt the JS dropdown unless we're sure that's the best path (it exposes the most common URI by default, saving a click).
Test Plan: Tested hg, svn, git repositories and the raw URL page. Test close button.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18203
Summary: First pass at providing a skeleton framework for laying out basic items in a left/right view. Will likely add some mobile-responsive options.
Test Plan: UIExamples
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18200
Summary: Better validation for setting a default image in project.icon
Test Plan: Test adding `"0"` and `""` as image options in project.icon, see error.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18197
Summary: Adds a page to view all and their path in UIExamples.
Test Plan: Review page in UIExamples, hover over image for path.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18196
Summary: This moves actions into the Diffusion main header, removes the locate file box, and widens description and cloning details. Projects are not currently in this layout, but will follow up in another diff. Trying to keep these changes small and iterative.
Test Plan:
Locate some files, test actions dropdown, repository with and without description. Also tablet, mobile layouts.
{F5040026}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18193
Summary: Builds out a map for icon->image in Projects, selects the icon's image as the default project image if there is no custom image chosen by the user.
Test Plan: Select various icons, see image change. Test choose picture, pick a new image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18174
Summary: Cleans up colors, removes commit hash and links the text instead. Also unsure how valuable "lint" column is here, but left it. I'd maybe like to understand that workflow since it just seems like clutter overall. Also Fixes T12905
Test Plan:
Review Phabricator, hg, and a few other test repositories locally. Holler if anything here seems bad, but this feels easier to read and use to me.
{F5038425}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12905
Differential Revision: https://secure.phabricator.com/D18189
Summary: More pretty images.
Test Plan: Set a robot as image for security project. So pretty.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18191
Summary:
Ref T12681. We need this to update the "paid until" window on support pacts.
(Instance billing doesn't use this because everything just checks if you have unpaid invoices, nothing actually happens when you pay them.)
Test Plan: See D18187.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12681
Differential Revision: https://secure.phabricator.com/D18188
Summary: Ref T12900. We implement one rule, but tell users a different (older) rule. See T12900 for discussion and history.
Test Plan:
- Verified draft/archived posts can't be seen by users who don't have permission to edit the blog.
- Drafted, archived, and published posts and read the related text.
- Looked through the changes I dug up in T12900#228748 for other strings I might have missed.
{F5033860}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12900
Differential Revision: https://secure.phabricator.com/D18182
Summary:
Adds a responsive tab bar navigation to Diffusion. Working through the new design here in pieces, so keep in mind M1477 is the target. Notably:
- Removes "branches" and "tags" from RevisionView, now on tabs
- Keeps "browse", "history", "readme" on RevisionView
- Adds tabs for all main views, including Graph... unless how that feels, so let me know.
Test Plan: Browse all pages, desktop and mobile. Test hg, svn, git repositories.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18161
Summary:
Depending on how you perform a restore, APC (or, e.g., running daemon processes) might be poisoned with out-of-date caches.
Add a note to advise installs to restart after restoring data.
See also lengthy fishing expedition support thread.
Test Plan: Read the text.
Reviewers: chad, amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18180
Summary: Fixes T12894. See that task for discussion.
Test Plan:
- Created repositories `abcdef`, then `abcdef-a` through `abcdef-f`.
- Before patch, awkward sort order.
- After patch, query for `abcdef` hits `abcdef` first.
- See T12894 for details and screenshots.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12894
Differential Revision: https://secure.phabricator.com/D18179
Summary: The main change here is moving (compare, search, history) into buttons in the header bar on all browse views. This allows Directory Browsing to be full width, since there is no other curtain information. File, Image, LFS, Binary all stay in TwoColumn layouts with the same buttons in the header.
Test Plan: Test viewing a directory, file, image, binary file, readme, and fake a gitlfs.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17766
Summary: Fixes T12883. The task seems correct to me and I think this is a copy/paste mistake that probably blames to me.
Test Plan: Fiddled these numbers, viewed a build in Harbormaster, saw the adjusted time.
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12883
Differential Revision: https://secure.phabricator.com/D18177
Summary:
Fixes T12884. In cases other than this UI, applications access URIs through the Repository they're part of. This means that applications interact with URIs which have gone through the correction/adjustment logic in `PhabricatorRepository->attachURIs()`, which fixes up "builtin" URIs to have the right values based on configuration.
In this case (and, as far as I can tell, only this case) we load the URI directly //and// act on its properties which depend on configuration and repository state.
This can mean we're using a different view of the URI than we should be.
To fix this: after loading the URI, reload it through the repository so the relevant adjustments are applied.
I think this is the most reasonable fix. We could try to make `RepositoryURIQuery` somehow enforce this, but the cost of this error is small (mild confusion about display state), the other things which do direct loads don't depend on this state (editing), and everything else loads via a repository and is likely to continue doing that forever.
Test Plan: {F5026633}
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12884
Differential Revision: https://secure.phabricator.com/D18176
Summary:
When users use the web UI to enter text like "Reviewers: x" into the "Summary" or "Test Plan", we can end up with an ambiguous commit message.
Some time ago we added a warning about this to the "Summary" field, and //attempted// to add it to the "Test Plan" field, but it actually gets called from the wrong place.
Remove the code from the wrong place (no callers, not reachable) and put it in the right place.
This fixes an issue where users could edit a test plan from the web UI to add the text "Tests: ..." and cause ambiguities on a later "arc diff --edit".
Test Plan: {F5026603}
Reviewers: chad, amckinley
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18175
Summary: Ref T12845. Converts the cluster and project config options to the new stuff; this is mostly just shifting boilerplate around.
Test Plan: Edited, deleted, and mangled these options from the web UI and CLI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18166
Summary:
Fixes T12870. Ref T12845.
Technically, this addresses the core issue in T12845 too, but I'm going to convert the rest of the `custom:...` types before closing that.
In particular, for T12870:
- Validates that keywords are unique across priorities.
- Fixes missing newline in documentation.
- Updates documentation to note that keywords are now mandatory and must be unique across priorities.
Test Plan: Edited, deleted and mangled all the Maniphest custom options (priorities, statuses, points, subtypes).
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12870, T12845
Differential Revision: https://secure.phabricator.com/D18165
Summary:
Ref T12845. This is the last of the hard-coded types.
These are mostly used for values which users don't directly edit, so it's largely OK that they aren't carefully validated. In some cases, it would be good to introduce a separate validator eventually.
Test Plan: Edited, deleted and mangled these values via the web UI and CLI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18164
Summary: Ref T12845. This move 'set' options (a set of values).
Test Plan: Set, deleted and mangled 'set' options from CLI and web UI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18160
Summary: Ref T12845. These options prompt the user to select from among concrete subclasses of some base class.
Test Plan: Set, deleted and mangled these values from the web UI and CLI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18159
Summary: Ref T12845. This updates the "list<string>" and "list<regex>" options.
Test Plan: Set, deleted, and mangled options of these types from the web UI and CLI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18157
