Summary:
Ref T13108. See PHI364. See the task and issue for discussion.
If a `git fetch` during synchronization hangs, the whole node currently hangs. While the causes of a `git fetch` hang aren't clear, we don't expect synchronization to ever reasonably take more than 15 minutes, so add a default timeout.
Test Plan: Will deploy and observe; this is difficult to reproduce or test directly.
Maniphest Tasks: T13108
Differential Revision: https://secure.phabricator.com/D19235
Summary:
Fixes T8845. Ref T13102. See PHI467. Currently, object monograms like `L1` which appear in Remarkup headers render incorrectly (with an internal placeholder "x") in the table of contents:
{F5475505}
Instead, render them down to just, e.g., `L1` in plain text.
For `{P123}` I just rendered it to `{P123}` since it's not really clear to me what users intend. This could be adjusted if there's some reasonable thing that someone is trying to do with this.
Test Plan: Wrote a Phriction document with several object references (like `L1` and `{P123}`) in headers. After patch, saw "x"-free, sensible-looking header names in the table of contents.
Maniphest Tasks: T13102, T8845
Differential Revision: https://secure.phabricator.com/D19234
Summary:
See <https://discourse.phabricator-community.org/t/desktop-only-notifications-mode-is-broken/1234>. Ref T13102. The "Desktop Only" mode for notifications currently shows both desktop and web notifications.
In fact, `JX.Notification` currently has no ability to render notifications as desktop-only. Make this work.
Note that many of the variables and parameters here, including `showAnyNotification`, `web_ready`, and `desktop_ready`, are named in an incorrect or misleading way. However, the new behavior appears to be correct.
Test Plan:
- Emitted test notifications in "No Notifications", "Web Only", "Web and Desktop", and "Desktop" modes.
- Saw appropriate notifications appear in the UI.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19233
Summary:
See PHI430. Ref T13102. When the "Build Status" element raises a policy exception, we currently fatal the whole page rather than raising a normal policy error.
This is because the policy check happens very late in page construction, long after we've made the decision to show the page instead of a policy error, and gets treated as a rendering error.
In turn, this is because the rendering is event-based rather than using a more modern Engine + EngineExtension sort of construct, so some of the actual logic runs way later than it should.
Since unwinding all of this isn't trivial and the current behavior is materially bad, limit the damage here for now by just hiding the element. See T13088 for notes on handling this in a more nuanced way in the future.
Test Plan:
- Created a revision visible to "Public".
- Ran a build against it with a build plan visible to "All Users".
- Viewed revision in an incognito window.
- Before patch: Policy fatal with a red "rendering phase" error box.
- After patch: Mostly-functional page with a missing "Build Status" element.
- Viewed revision as a user with a normal session, saw the same UI before and after the change.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19232
Summary:
Ref T13102. See PHI461. An install is interested in querying projects by slug.
I think I omitted this capability originally only because we're not consistent about what slugs are called (they are "Slugs" internally, but "Hashtags" in the UI).
However, this ship has sort of already sailed because the results have a "slug" field. Just expose this as "slugs" for consistency with the existing API field and try to smooth thing over with a little documentation hint.
Test Plan: Queried for projects by slug, got the desired results back.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19230
Summary: Ref T13106. When profiling service queries, there's no convenient way to easily get a sense of why a query was issued. Add a mode to collect traces for each query to make this more clear. This is rough, but works well enough to be useful.
Test Plan: Clicked "Analyze Query Plans", got stack traces for each service call.
Maniphest Tasks: T13106
Differential Revision: https://secure.phabricator.com/D19221
Summary:
See PHI457. There's no real reason not to allow this, it just wasn't clear if it was useful. See D18626.
An install had a user `arc diff` and then sprint out the door to take a very long vacation before the builds finished. One failed, so the revision is stuck as a draft forever. This seems like a reasonable motivation for allowing "Commandeer".
Test Plan: Successfully commandeered a draft.
Differential Revision: https://secure.phabricator.com/D19228
Summary: Ref T13069. See PHI54. Some of this behavior isn't entirely obvious, so give users a heads up in the documentation to help warn them about what is to come.
Test Plan: Read documentation.
Maniphest Tasks: T13069
Differential Revision: https://secure.phabricator.com/D19227
Summary: See PHI448. Ref T13106. The current implementation here can end up in an infinite stack if, e.g., a project uses "Visible to: Subscribers".
Test Plan: Will push.
Maniphest Tasks: T13106
Differential Revision: https://secure.phabricator.com/D19226
Summary: Depends on D19224. Ref T13106. Computing this is expensive and the value is not used. This came from D15432, but we never actually shipped that feature.
Test Plan: Saw local query cost drop from 139 to 110 with no change in functionality. Grepped for removed symbols.
Maniphest Tasks: T13106
Differential Revision: https://secure.phabricator.com/D19225
Summary:
Depends on D19223. Ref T13106. When we're loading a file, we currently test if it's a transformed version of another file (usually, a thumbnail) and apply policy behavior if it is.
We know that builtins and profile images are never transforms and that the policy behavior for these files doesn't matter anyway. Skip loading transforms for these files.
Test Plan: Saw local queries drop from 146 to 139 with no change in behavior.
Maniphest Tasks: T13106
Differential Revision: https://secure.phabricator.com/D19224
Summary:
Depends on D19222. Ref T13106. We currently execute an edge query (and possibly an object query) when loading builtin files, but this is never necessary because we know these files are always visible.
Instead, skip this logic for builtin files and profile image files; these files have global visibility and will never get a different policy result because of file attachment information.
(In theory, we could additionally skip this for files with the most open visibility policy or some other trivially visible policy like the user's PHID, but we do actually care about the attachment data some of the time.)
Test Plan: Saw queries drop from 151 to 145 on local test page. Checked file attachment data in Files, saw it still working correctly.
Maniphest Tasks: T13106
Differential Revision: https://secure.phabricator.com/D19223
Summary: Depends on D19221. Ref T13106. When we fall back to default profile images for projects, bulk load them instead of doing individual queries.
Test Plan: Saw local task drop from 199 queries to 151 queries with the same actual outcome. Saw custom and default profile images on the project list page.
Maniphest Tasks: T13106
Differential Revision: https://secure.phabricator.com/D19222
Summary: Support pacts have been working well and are here to stay, so guide users toward them rather than older resources (consulting / paid prioritization).
Test Plan: Read document. Twice!
Differential Revision: https://secure.phabricator.com/D19219
Summary:
See PHI451. Ref T13102. DarkConsole uses an ancient inline "onclick" handler to expand the stack traces for errors.
The new Content-Security-Policy prevents this from functioning.
Replace this with a more modern behavior-driven action instead.
Test Plan:
- Clicked some errors in DarkConsole, saw stack traces appear.
- Grepped for `onclick` and `jsprintf()` to see if I could find any more of these, but came up empty.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19218
Summary:
See PHI446. Ref T13088. Currently, there's no way to access older generations of a build unless you know the secret `?g=1` URI magic.
When a build has multiple generations, show a history table and let users click to see older run information.
This is currently very basic. It would be nice to show when each generation started, who started/restarted it, and what the build status was at the time the build was restarted. There's currently no convenient source for this information so just add a bare-bones, working version of this for now.
Test Plan:
Viewed pending, single-run and multi-restart builds. Saw table on builds with more than one generation. Clicked table entries to see different build data.
{F5471160}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13088
Differential Revision: https://secure.phabricator.com/D19217
Summary:
Fixes T12994. We need `MYSQLI_ASYNC` to implement client-side query timeouts, and we need MySQLi + MySQL Native Driver to get `MYSQLI_ASYNC`.
Recommend users install MySQLi and MySQL Native Driver if they don't have them. These are generally the defaults and best practice anyway, but Ubuntu makes it easy to use the older stuff.
All the cases we're currently aware of stem from `apt-get install php5-mysql` (which explicitly selects the non-native driver) so issue particular guidance about `php5-mysqlnd`.
Test Plan:
- Faked both issues locally, reviewed the text.
- Will deploy to `secure`, which currently has the non-native driver.
Maniphest Tasks: T12994
Differential Revision: https://secure.phabricator.com/D19216
Summary:
Ref T13102. An install has a custom rule for bridging JIRA references via Doorkeeper and would like to be able to render them as `JIRA-123` instead of `JIRA JIRA-123 Full JIRA title`.
I think it's reasonable to imagine future support upstream for `JIRA-123`, `{JIRA-123}`, and so on, although we do not support these today. We can take a small step toward eventual support by letting the rendering pipeline understand different view modes.
This adds an optional `name` (the default text rendered before we do the OAuth sync) and an optional `view`, which can be `short` or `full`.
Test Plan:
I tested this primarily with Asana, since it's less of a pain to set up than JIRA. The logic should be similar, hopefully.
I changed `DoorkeeperAsanaRemarkupRule` to specify `name` and `view`, e.g `'view' => (mt_rand(0, 1) ? 'short' : 'full')`. Then I made a bunch of Asana references in a comment and saw them randomly go short or long.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19215
Summary:
Fixes T5741. We break GIFs apart with "-coalesce" which completely rasterizes each frame, but stitch them back together without specifying "-dispose".
This produces the default "-dispose none" behavior, which causes GIF frames to "pile up" if they contain transparency.
Instead, use "-dispose background" so that the previous frame is erased before each new frame is drawn.
Test Plan: See T5741 for additional details.
Maniphest Tasks: T5741
Differential Revision: https://secure.phabricator.com/D19214
Summary:
Fixes T13104. The "Subscribers" policy implementation still uses older logic to query project membership and misses parent projects and milestones which a user is a member of.
Instead of doing an edge query for explicit membership, use a project query to find all projects the viewer belongs to.
Test Plan:
- Created a parent project A.
- Created a subproject B.
- As Bailey, created a task with "Visible To: Bailey, Subscribers".
- Added parent project A as a task subscriber.
Then:
- As Alice, verified I could not see the task.
- As Alice, joined subproject B.
- Before patch: still unable to see the task.
- After patch: can see the task.
- Removed parent project A as a subscriber, verified I could no longer see the task.
Maniphest Tasks: T13104
Differential Revision: https://secure.phabricator.com/D19213
Summary:
See PHI431. Ref T13102. An install is interested in a custom "non-sticky" accept action, roughly.
On the one hand, this is a pretty hacky patch. However, I suspect it inches us closer to T731, and I'm generally comfortable with exploring the realms of "Accept Next Update", "Unblock Without Accepting", etc., as long as most of it doesn't end up enabled by default in the upstream.
Test Plan:
- Accepted and updated revisions normally, saw accepts respect global stickiness.
- Modified the "Accept" action to explicitly be unsticky, saw nonsticky accept behavior after update.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19211
Summary: See PHI433. Ref T13102. Users in the wild have mixed expecations about exactly what "draft" means. Recent changes have tried to make behavior more clear. As part of clarifying messaging, make it explicit that `@mention` does not work on drafts by showing users a warning when they try to `@mention` a user.
Test Plan:
- Mentioned users on drafts, got a warning.
- Posted normal comments on drafts, no warning.
- Posted normal/mention comments on non-drafts, no warning.
Maniphest Tasks: T13102
Differential Revision: https://secure.phabricator.com/D19210
Summary: Ref T13103. Make favicons customizable, and perform dynamic compositing to add marker to indicate things like "unread messages".
Test Plan: Viewed favicons in Safari, Firefox and Chrome. With unread messages, saw pink dot composited into icon.
Maniphest Tasks: T13103
Differential Revision: https://secure.phabricator.com/D19209
Summary: See PHI439. Use slightly richer "dominion" return values for consistency.
Test Plan: Fetched results with `owners.search` API method.
Differential Revision: https://secure.phabricator.com/D19208
Summary:
See PHI439. This fills in additional information about Owners packages.
Also removes dead `primaryOwnerPHID`.
Test Plan: Called `owners.search` and reviewed the results. Grepped for `primaryOwnerPHID`.
Differential Revision: https://secure.phabricator.com/D19207
Summary: See PHI433. This beefs up reminder texts for drafts a little bit since some users in the wild aren't always seeing/remembering the existing, fairly subtle hints.
Test Plan: Created a reivsion with `--draft`, viewed it, saw richer reminders.
Differential Revision: https://secure.phabricator.com/D19204
Summary:
Depends on D19201. Ref T13101. This likely produces relatively stable-ish image references for email.
They currently TTL after 30 days but this makes the jokes more exclusive and special so it's a feature, not a bug.
Test Plan: I'm just going to test this in production because I'm a ninja superstar developer.
Maniphest Tasks: T13101
Differential Revision: https://secure.phabricator.com/D19203
Summary:
Depends on D19198. Ref T13101. Ref T5258. Pull compositing logic out of the `Controller`.
This is moving toward fixing memes in email.
Test Plan: Used new and old memes. Used API memes.
Maniphest Tasks: T13101, T5258
Differential Revision: https://secure.phabricator.com/D19200
Summary: See PHI432. Ref T13099. Short names never made it to the UI/API but seem stable now, so support them.
Test Plan: {F5465173}
Maniphest Tasks: T13099
Differential Revision: https://secure.phabricator.com/D19202
Summary:
See <https://discourse.phabricator-community.org/t/lightbox-not-working/1201/3>. The lightbox code is fragile and currently relies on simulating a click on the actual "<a />" tag surrounding other images in the document.
This breaks the prev/next links which ignore the event because it there's no "<img />".
Instead, don't simulate clicks and just call the code we want directly.
Test Plan: Added several images to a page, used lightbox prev/next buttons to cycle between them.
Differential Revision: https://secure.phabricator.com/D19197
Summary:
Ref T13101. This is a minimal change to make "{meme ...}" work with the new Content-Security-Policy by using an Ajax request to generate the image and then swapping the source on the client.
This could be much cleaner (see T5258, etc).
Test Plan: Used `{meme, src=cat6, above=i am, below=cat}`, chuckled completely unironically.
Maniphest Tasks: T13101
Differential Revision: https://secure.phabricator.com/D19196
Summary: Depends on D19194. Fixes T4190. This should be in good-enough shape now to release and support more generally.
Test Plan: Used `{image ...}` in remarkup.
Maniphest Tasks: T4190
Differential Revision: https://secure.phabricator.com/D19195
Summary: Depends on D19193. Ref T13101. Fixes T4190. Before we render a fancy AJAX placeholder, check if we already have a valid cache for the image. If we do, render a direct `<img />` tag. This is a little cleaner and, e.g., avoids flicker in Safari, at least.
Test Plan: Rendered `{image ...}` rules in remarkup with new and existing URIs.
Maniphest Tasks: T13101, T4190
Differential Revision: https://secure.phabricator.com/D19194
Summary:
Depends on D19192. Ref T4190. Ref T13101. Instead of directly including the proxy endpoint with `<img src="..." />`, emit a placeholder and use AJAX to make the request. If the proxy fetch fails, replace the placeholder with an error message.
This isn't the most polished implementation imaginable, but it's much less mysterious about errors.
Test Plan: Used `{image ...}` for valid and invalid images, got images and useful error messages respectively.
Maniphest Tasks: T13101, T4190
Differential Revision: https://secure.phabricator.com/D19193
Summary:
Ref T13101. Ref T4190. This rule is currently single-phase but I'd like to check for a valid proxied image in cache already and just emit an `<img ... />` tag pointing at it if we have one.
To support batching these lookups, split the rule into a parse phase (where we extract URIs) and a markup phase (where we build tags).
Test Plan: Used `{img ...}` in Remarkup with no apparent behavioral changes. (This change should do nothing on its own.)
Maniphest Tasks: T13101, T4190
Differential Revision: https://secure.phabricator.com/D19192
Summary: Depends on D19190. Fixes T12590. Ref T13099. Replaces the barely-usable, gigantic, poorly ordered "<select />" control with a tokenizer. Attempts to fix various minor issues.
Test Plan:
- Edited paths: include/exclude paths, from different repositories, different actual paths.
- Used "Add New Path" to add rows, got repository selector prepopulated with last value.
- Used "remove".
- Used validation typeahead, got reasonable behaviors?
The error behavior if you delete the repository for a path is a little sketchy still, but roughly okay.
Maniphest Tasks: T13099, T12590
Differential Revision: https://secure.phabricator.com/D19191
Summary:
Depends on D19189. Ref T12590. The "validate" and "complete" endpoints for this UI could incorrectly return redirect responses. These aren't critical to the behavior of Owners, but they're nice to have, and shouldn't redirect.
Instead, skip the canonicalizing redirect for AJAX requests.
Test Plan: Edited Owners paths in a repository with a short name, got completion/validation again.
Maniphest Tasks: T12590
Differential Revision: https://secure.phabricator.com/D19190
Summary: Ref T12590. This is ancient code which was used to prefill `/trunk/tfb/www/` or similar at Facebook. I don't think it ever had a UI and no install has asked for this feature since 2011.
Test Plan: Grepped for affected symbols, edited paths in Owners.
Maniphest Tasks: T12590
Differential Revision: https://secure.phabricator.com/D19189
Summary: See PHI425. See T12678. This should be an integer, but may be a string.
Test Plan: Called `differential.revision.edit`, observed integer in result instead of string.
Differential Revision: https://secure.phabricator.com/D19186
Summary: Depends on D19184. Ref T11015. Now that we have a digest index column, we can improve some of the queries a bit.
Test Plan:
- Ran queries from revision pages before and after with and without EXPLAIN.
- Saw the same results with much better EXPLAIN plans.
- Fragment size is now fixed at 12 bytes per fragment, so we can shove more of them in a single query.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19185
Summary:
Depends on D19183. Ref T11015. Currently, adding a trailing slash works great and omitting it mysteriously doesn't work.
Store a normalized version with an unconditional trailing slash for the lookup logic to operate on, and a separate display version which tracks what the user actually typed.
Test Plan:
- Entered "/src/main.c", "/src/main.c/", saw them de-duplicate.
- Entered "/src/main.c", saw it stay that way in the UI but appear as "/src/main.c/" internally.
- Added a rule for "/src/applications/owners" (no slash), created a revision touching paths in that directory, saw Owners fire for it.
- Changed the display value of a path only ("/src/main.c" to "/src/main.c/"), saw the update reflected in the UI without any beahvioral change.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19184
Summary:
Depends on D19182. Ref T11015. This changes `path` from `text255` to `longtext` because paths may be arbitrarily long.
It adds `pathDisplay` to prepare for display paths and storage paths having different values. For now, `pathDisplay` is copied from `path` and always has the same value.
Test Plan:
- Ran migration, checked database for sanity (all `pathDisplay` and `path` values identical).
- Added new paths, saw `pathDisplay` and `path` get the same values.
- Added an unreasonably enormous path with far more than 255 characters.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19183
Summary:
Depends on D19181. Ref T11015. This nukes duplicates from the table if they exist, then adds a unique key.
(Duplicates should not exist and can not be added with any recent version of the web UI.)
Test Plan:
- Tried to add duplicates with web UI, didn't have any luck.
- Explicitly added duplicates with manual `INSERT`s.
- Viewed packages in web UI and saw duplicates.
- Ran migrations, got a clean purge and a nice unique key.
- There's still no way to actually hit a duplicate key error in the UI (unless you can collide hashes, I suppose), this is purely a correctness/robustness change.
Maniphest Tasks: T11015
Differential Revision: https://secure.phabricator.com/D19182
