Summary: Fixes T11541. `PhabricatorApplication::getIconURI()` has been returning only null for a while (I assume in preparation to remove it). I removed the method and all the remaining call sites.
Test Plan: Removed the method and then clicked around. Things didn't explode!
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Maniphest Tasks: T11541
Differential Revision: https://secure.phabricator.com/D16470
Summary: Previously we collapsed all table search results, but the new UI doesn't need it. Remove unused methods and fix CSS.
Test Plan: Legalpad Signatures, Phortune Accounts.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16469
Summary: Fixes T11532. The language selection for pastes is now a typeahead that is backed by `pygments.dropdown-choices`. There is still a bit of weirdness around making "auto-detection" the default state. To actually select a different language, you first need to remove the "auto detect" option that is pre-populated in a new paste. Other than that, it works as intended.
Test Plan:
Create a new paste with a file extension that can be auto-detected.
Created a new paste and manually selected the language
Edited a paste and changed the language.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley, yelirekim
Maniphest Tasks: T11532
Differential Revision: https://secure.phabricator.com/D16463
Summary: Ref T11132, significantly cleans up the Config app, new layout, icons, spacing, etc. Some minor todos around re-designing "issues", mobile support, and maybe another pass at actual Group pages.
Test Plan: Visit and test every page in the config app, set new items, resolve setup issues, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam, Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16468
Summary: Ref T11132. This gets rid of the red bar for admins and instead shows a new menu item next to notifications/chat if there are unresolved configuration issues. Menu goes away if there are no issues. May move this later into the bell icon, but think think might be the right place to start especially for NUX and updates. Maybe limit the number of items?
Test Plan:
Tested with some, lots, and no config issues.
{F1790156}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16461
Summary: I plan to reuse these styles with Config, maybe also Almanac, etc.
Test Plan: Review /guides/, see same styles.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16467
Summary:
Fixes T10423. Ref T11524. This changes `diffusion.rawdiffquery` to return a file PHID instead of a blob of data.
This is better in general, but particularly better for huge diffs (as in T10423) and diffs with non-utf8 data (as in T10423).
Test Plan:
- Used `bin/differential extract` to extract a latin1 diff, got a clean diff.
- Used `bin/repository reparse --herald` to rerun herald on a latin1 diff, got a clean result.
- Pushed latin1 diffs to test commit hooks.
- Triggered the the too large / too slow logic.
- Viewed latin1 diffs in Diffusion.
- Used "blame past this change" in Diffusion to hit the `before` logic.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T10423, T11524
Differential Revision: https://secure.phabricator.com/D16460
Summary:
Ref T11524. Ref T10423. Earlier, I converted `diffusion.filecontentquery` to put the actual file content in Files, then return a PHID for the file, instead of trying to send the content over Conduit.
In T11524, we have a similar set of problems with diffs that contain non-UTF8 data (and, in T10423, diffs that are simply enormous).
I want to provide an API method to do the same sort of thing with diff output (like from `git diff`), so we call the method, it shoves the data in Files, and then we go pull it out of Files.
To support this, take the "shove the output of a Future into Files" logic and put it in a new base `FileFuture` query. This will let me make `RawDiffQuery` share the logic more easily.
Test Plan: Browsed Diffusion, ran `diffusion.filecontentquery` to fetch file content.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10423, T11524
Differential Revision: https://secure.phabricator.com/D16458
Summary: Fixes T11513. Previously the selector was just a giant dropdown which was just... just too much. Now there's a handy typeahead.
Test Plan:
Happy Path:
Go to `Settings -> Home Page -> Pin Application`, start typing in the form then select one of the options. Click on "Pin Application". The application should now be in the list.
Other paths:
- Type nothing into the box and submit, nothing should happen.
- Choose an application that is already pinned. The list should stay the same.
- Type nonsense into the box and submit, nothing should happen.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin, epriestley, yelirekim
Maniphest Tasks: T11513
Differential Revision: https://secure.phabricator.com/D16459
Summary:
Ref T11524. This problem was more difficult to diagnose than necessary because we swallow errors silently in `AphontResponse` when emitting JSON responses.
Instead of using `json_encode()`, use `phutil_json_encode()` which throws on failure.
Test Plan:
Old behavior was HTTP 200 with no body.
New behavior is HTTP 500 with this message:
```
[2016-08-26 07:33:59] EXCEPTION: (HTTPFutureHTTPResponseStatus) [HTTP/500] Internal Server Error
Exception: Failed to JSON encode value (#5: Malformed UTF-8 characters, possibly incorrectly encoded): Dictionary value at key "result" is not valid UTF8, and cannot be JSON encoded: diff --git a/latin1.txt b/latin1.txt
new file mode 100644
index 0000000..ce6c927
--- /dev/null
+++ b/latin1.txt
@@ -0,0 +1 @@
+<�>
. at [<phutil>/src/future/http/BaseHTTPFuture.php:339]
```
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T11524
Differential Revision: https://secure.phabricator.com/D16457
Summary:
Fixes T11537. See that task for discussion.
Although we could accommodate these faithfully, it requires a huge migration and affects one repository on one install which was written with buggy tools.
At least for now, just replace out-of-32-bit-range epoch values with the current time, which is often somewhat close to the real value.
Test Plan:
- Following the instructions in T11537, created commits in 40,000 AD.
- Tried to import them, reproducing the "epoch" database issue.
- Applied the patch.
- Successfully imported future-commits, with some liberties around commit dates. Note that author date (not stored in an `epoch` column) is still shown faithfully:
{F1789302}
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T11537
Differential Revision: https://secure.phabricator.com/D16456
Summary:
Fixes T9235. When the stars align, PHP 5.6 or newer emits a deprecation warning on startup about "always_populate_raw_post_data" which occurs too early for us to intercept and can break responses by adding garbage to the output.
These settings appear to be sufficient:
```
always_populate_raw_post_data = 1
display_errors = 1
display_startup_errors = 1
error_reporting = -1
```
Then make a request with an unusual content type:
```
$ curl -X POST -H "Content-Type: application/json" -d "{foo: bar}" http://phabricator.example.com/
```
This triggers the warning:
```
<br />
<b>Deprecated</b>: Automatically populating $HTTP_RAW_POST_DATA is deprecated and will be removed in a future version. To avoid this warning set 'always_populate_raw_post_data' to '-1' in php.ini and use the php://input stream instead. in <b>Unknown</b> on line <b>0</b><br />
<br />
...
```
To avoid this, just instruct administrators to set this value to "-1", which completely disables the feature and silences the warning.
Test Plan:
- Reproduced this issue by following the instructions above.
- Triggered the setup issue locally and read all the captivating prose:
{F1786911}
- Made the configuration change it directed me to, saw the setup issue resolve.
Reviewers: jcox
Reviewed By: jcox
Maniphest Tasks: T9235
Differential Revision: https://secure.phabricator.com/D16454
Summary: Ref T11132. This is a new default default (no dashboard) homepage. It offers (Diffs) (Tasks) (Repositories) in the main column and (Feed) in the side column. No NUX stuff, No logged out public view (upcoming diff). This should be complete, but unclear how to bucketize Differential.
Test Plan: Test new account's default homepage.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16449
Summary: Ref T8628. Updates people controllers for handleRequest
Test Plan: Viewed the people list, viewed the activity logs, then went through the approval process for a new user account.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Maniphest Tasks: T8628
Differential Revision: https://secure.phabricator.com/D16451
Summary: Fixes T8850. Previously, if a user's preamble script mangled `$_SERVER['REMOTE_ADDR']` or somehow set it to `null`, the user would get errors when performing certain actions. Now those errors shouldn't occur, and instead the user will be warned that there is a setup issue related to their preamble script.
Test Plan: Create a preamble script that contains `$_SERVER['REMOTE_ADDR'] = null;` then navigate to /config/issue/. There should be a warning there about `REMOTE_ADDR` not being available.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, yelirekim, epriestley
Maniphest Tasks: T8850
Differential Revision: https://secure.phabricator.com/D16450
Summary: Ref T10951. This adds the application name as an attribute below the document type in the UI for doc type search.
Test Plan: Verify that the application name appears as an attribute on the document type results.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Maniphest Tasks: T10951
Differential Revision: https://secure.phabricator.com/D16446
Summary: Ref T10951. This diff removes uninstalled applications from the result set for DocumentType restults
Test Plan: Uninstall an application (diviner for example), then go to the document type search menu and ensure that the uninstalled application doesn't show up.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T10951
Differential Revision: https://secure.phabricator.com/D16445
Summary: Fixes T10999. Now MFA will be required for all email address related operations.
Test Plan: Ensure that adding and removing email addresses now requires you to enter high security mode.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T10999
Differential Revision: https://secure.phabricator.com/D16444
Summary: Previously, the chatbot docs instructed users to get certificates for the conduit API and put the cert in a `conduit.cert` config key. In order to get the chatbot to work, I needed to instead get an API key and put it in the `conduit.token` config entry.
Test Plan: Doc fix. Tried the new documented way and it worked.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16443
Summary: These were blank, from last week's shenanigans.
Test Plan: View homepage settings, see icons.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16447
Summary: Fixes T11508. The config entry `remarkup.ignored-object-names` already contains a blacklist of object names that should be ignored in the web UI. This change makes that blacklist also apply to the chatbot. This makes it possible to have a chatbot ignore things like V1, V2, Q1 and any other phrases the user may not want to generate links to objects.
Test Plan: Create objects (tasks, slowvotes, etc.) then mention the object names in chat (with the bot running). The bot should respond with helpful links to the given objects. Then add the object names to the blacklist through the config web UI. This apparently triggers the bot to restart itself. Then mention the object names in chat again. The bot should no longer respond with links because those object names have been added to the blacklist regex.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley
Maniphest Tasks: T11508
Differential Revision: https://secure.phabricator.com/D16442
Summary: Ref T11522. This explains how to actually use `bin/repository hint`.
Test Plan: Read the document. Used `bin/repository hint` as directed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16441
Summary:
Ref T11522. This tries to reduce the cost of rewriting a repository by making handles smarter about rewritten commits.
When a handle references an unreachable commit, try to load a rewrite hint for the commit. If we find one, change the handle name to "OldHash > NewHash" to provide a strong hint that the commit was rewritten and that copy/pasting the old hash (say, to the CLI) won't work.
I think this notation isn't totally self-evident, but users can click it to see the big error message on the page, and it's at least obvious that something weird is going on, which I think is the important part.
Some possible future work:
- Not sure this ("Recycling Symbol") is the best symbol? Seems sort of reasonable but mabye there's a better one.
- Putting this information directly on the hovercard could help explain what this means.
Test Plan: {F1780719}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16437
Summary:
Ref T11522. When a commit is no longer reachable from any branch/tag, we currently show a "this has been deleted" message.
Instead, go further: check if there is a "rewritten" hint pointing at a commit the current commit was rewritten into. If we find one, show a message about that instead.
(This isn't super pretty, just getting it working for now. I expect to revisit this UI in T9713 if we don't get to it before that.)
Test Plan: {F1780703}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16436
Summary: Ref T11522. This migrates any "badcommit" data (which probably only exists at Facebook and on 1-2 other installs in the wild) to the new "hint" table.
Test Plan:
- Wrote some bad commit annotations to the badcommit table.
- Viewed them in the web UI and used `bin/repository reparse --change ...` to reparse them. Saw "this is bad" messages.
- Ran migration, verified that valid "badcommit" rows were successfully migrated to become "hint" rows.
- Viewed the new web UI and re-parsed the change, saw "unreadable commit" messages.
- Viewed a good commit; reparsed a good commit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16435
Summary:
Ref T11522. This provides storage for tracking rewritten commits (new feature) and unreadable commits (existing feature, but really hacky).
This doesn't do anything yet, just adds a table and a CLI tool for updating it. I'll document the tool once it works. You just pipe in some JSON, but I need to document the format.
Test Plan:
- Piped JSON for "none", "rewritten" and "unreadable" hints into `bin/repository hint`.
- Examined the database to see that the table was written properly.
- Tried to pipe bad JSON in, invalid hint types, etc. Got reasonable human-readable error messages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16434
Summary: Getting rid of some code! This method has no callsites so it should be safe to remove completely. Ref T9690
Test Plan: Removed method and clicked around to make sure nothing broke.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: yelirekim, epriestley
Maniphest Tasks: T9690
Differential Revision: https://secure.phabricator.com/D16439
Summary: Adds a schema patch that removes conduit_connectionlog. This table hasn't been used in 8ish months so it's probably safe to get rid of.
Test Plan: Apply the patch locally and confirm that the table does indeed get dropped.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16438
Summary: Removed call to the deprecated buildStandardPageResponse method from XHProfProfileController
Test Plan: Install, configure, and use XHProf. I'll need some guidance with this
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16432
Summary:
After D16431, listing the same `@annotation` multiple times makes the docblock parser return a list.
We have some resources which list `@requires` or `@provides` several times, but don't handle the new parser properly. Make the code more flexible, since this is a reasonable way to specify the annotations.
See also D16432. This produces a failure in this form:
```
[2016-08-23 21:10:15] ERROR 2: trim() expects parameter 1 to be string, array given at [/core/data/drydock/workingcopy-74/repo/phabricator/src/applications/celerity/CelerityResourceMapGenerator.php:236]
2 arcanist(head=master, ref.master=89e8b4852384), phabricator(head=6c940fb71b0a8850c6a1b7f5fc642a8f8135a76a, ref.master=b521f2349e46), phutil(head=master, ref.master=237549280f08)
3 #0 trim(array) called at [<phabricator>/src/applications/celerity/CelerityResourceMapGenerator.php:236]
4 #1 CelerityResourceMapGenerator::getProvidesAndRequires(string, string) called at [<phabricator>/src/applications/celerity/CelerityResourceMapGenerator.php:193]
5 #2 CelerityResourceMapGenerator::rebuildTextResources(CelerityPhabricatorResources, CelerityResourceTransformer) called at [<phabricator>/src/applications/celerity/CelerityResourceMapGenerator.php:54]
6 #3 CelerityResourceMapGenerator::generate() called at [<phabricator>/src/__tests__/PhabricatorCelerityTestCase.php:16]
7 #4 PhabricatorCelerityTestCase::testCelerityMaps()
8 #5 call_user_func_array(array, array) called at [<arcanist>/src/unit/engine/phutil/PhutilTestCase.php:492]
9 #6 PhutilTestCase::run() called at [<arcanist>/src/unit/engine/PhutilUnitTestEngine.php:69]
10 #7 PhutilUnitTestEngine::run() called at [<arcanist>/src/unit/engine/ArcanistConfigurationDrivenUnitTestEngine.php:147]
11 #8 ArcanistConfigurationDrivenUnitTestEngine::run() called at [<arcanist>/src/workflow/ArcanistUnitWorkflow.php:167]
12 #9 ArcanistUnitWorkflow::run() called at [<arcanist>/scripts/arcanist.php:394]
```
Test Plan: Ran `bin/celerity map`, no more warnings and no change to the actual map.
Reviewers: joshuaspence, chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16433
Summary: Added a brand new shiny cat fact
Test Plan: Pulled up a project with motivator installed and nothing broke
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16430
Summary: Switches over to new property UI boxes, splits core and apps into separate pages. Move Versions into "All Settings". I think there is some docs I likely need to update here as well.
Test Plan: Click on each item in the sidebar, see new headers.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16429
Summary:
Ref T7148. The automated export process runs this via daemon, which can't answer "Y" to this prompt. Let it "--force" instead.
(Some of my test instances didn't have any repositories, which is why I didn't catch this sooner.)
Test Plan: Ran `bin/repository move-paths --force ...`, saw change applied without a prompt.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7148
Differential Revision: https://secure.phabricator.com/D16426
Summary: Ref T11132. Will work on CSS tomorrow, but wanted to rough in the UI Steps to get guidance. Not sure what you have in mind for the "app" part, if you want to explain it and I build or you build.
Test Plan: Visit each page and click on links. Very rough and unfinished.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16419
Summary: Ref T11132. Adds a background color option to PHUIIconView, for use whereever, and NUX. Also normalize icon placement for mixed image/icon result list.
Test Plan: Test in UIExamples, and Global Settings.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132
Differential Revision: https://secure.phabricator.com/D16424
Summary:
Fixes T11490. Currently, this query can not use a key and the table size may be quite large.
Adjust the query so it can use a key for both selection and ordering, and add that key.
Test Plan: Ran `EXPLAIN` on the old query in production, then added the key and ran `EXPLAIN` on the new query. Saw key in use, and "rows" examined drop from 29,273 to 15.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11490
Differential Revision: https://secure.phabricator.com/D16423
Summary: Fixes T11493. This code is a little bit weird/clever, simplify it so that we always cast the handles to an array early on.
Test Plan: {F1767668}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11493
Differential Revision: https://secure.phabricator.com/D16422
Summary: Fixes T11501. Let's you pass in a full PHUIIconView or just the icon name to give ObjectListItem a large icon.
Test Plan: Alamanac, Applications, Drydock, Settings, Search Typeahead, Config page...
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11501
Differential Revision: https://secure.phabricator.com/D16421
Summary:
Ref T11501. This method was removed in D16418, but still has some callsites. I know of four:
- Config
- Settings
- Drydock main page
- Almanac main page
Since I might be missing some and it's close to the release cut, just put the method back for now until we can clean it up more properly.
Test Plan: Viewed Settings, Config, Drydock, Almanac. No more fatal on this method being missing.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11501
Differential Revision: https://secure.phabricator.com/D16420
Summary: I don't think we use footicons, removing that CSS. States were added but only used in Auth, convert them to statusIcon instead.
Test Plan: Visit Auth, UIExamples, grep for `setState`
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16418
Summary: Ref T11132, Ref T11478. Builds out a basic PHUICMSView and Guides Application, no content / modules.
Test Plan: Go to /guides/, see blank states for new guides.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11132, T11478
Differential Revision: https://secure.phabricator.com/D16414
Summary:
Ref T6996. Depends on D16407. This does the same stuff as D16407, but for `bin/storage renamespace`. In particular:
- Support writing directly to a file (so we can get good errors on failure).
- Support in-process compression.
Also add support for reading out of a `storage dump` subprocess, so we don't have to do a dump-to-disk + renamespace + compress dance and can just stream out of MySQL directly to a compressed file on disk.
This is used in the second stage of instance exports (see T7148).
It would be nice to share more code with `bin/storage dump`, and possibly to just make this a flag for it, although we still do need to do the file-based version when importing (vs exporting). I figured that was better left for another time.
Test Plan:
Ran `bin/storage renamespace --live --output x --from A --to B --compress --overwrite` and similar commands.
Verified that a compressed, renamespaced dump came out of the other end.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6996
Differential Revision: https://secure.phabricator.com/D16410
Summary:
Ref T6996. If you do this kind of thing in the shell, you don't get a good error by default if the `dump` command fails:
```
$ bin/storage dump | gzip > output.sql.gz
```
This can be worked around with some elaborate bash tricks, but they're really clunky and uninintuitive.
We also need to do this in several places (while writing backups; while performing exports), and I don't want to copy clunky bash tricks all over the codebase.
Instead, provide `--output` and `--compress` flags which just do this processing inside `bin/storage dump`. It will fail appropriately if any of the underlying operations fail. This also makes the write a little safer (refuses to overwrite) and the code more reusable.
Test Plan:
- Did three dumps, with no flags, `--output`, and `--output --compress`.
- Verified all three took similar amounts of time and were identical except for "Date Exported" timestamps in comments (except that the compressed one was compressed).
- Used `gunzip` to examine the compressed one, verified it was really compressed.
- Faked a write error, saw properly command behavior (clean up file + exit with error).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6996
Differential Revision: https://secure.phabricator.com/D16407
Summary:
Fixes T11488. I broke this in D16360, I think by doing a little extra refactoring after testing it.
This code is very old, before commits always needed to have repositories attached in order to do policy checks.
Modernize it by mostly just using the repository which is present on the Commit object, and using the existing edge cache.
Test Plan: Ran a commit through the Herald test adapter.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11488
Differential Revision: https://secure.phabricator.com/D16413
Summary: Caught this while linking to it from D16405.
Test Plan: Consulted a dictionary.
Reviewers: chad, alexmv
Reviewed By: alexmv
Differential Revision: https://secure.phabricator.com/D16406
Summary:
Fixes T11487. Improve documentation for three situations:
- When you configure a cluster behind a load balancer, all requests are trusted but not all have an "X-Forwarded-For" header. Change the suggested snippet to read this header only if it exists.
- When a request goes through a series of load balancers (as with a CDN) they can end up writing a list of IPs to the header. Parse these.
- Remove the "rate limiting" stuff -- this got disabled/removed a long time ago and is misleading/incorrect.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11487
Differential Revision: https://secure.phabricator.com/D16403
Summary: Fixes T11484. These mechanisms aren't necessarily obvious and make sense to document here.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11484
Differential Revision: https://secure.phabricator.com/D16404
Summary:
Fixes T11480. This cleans up the error logs a little by quieting three common errors which are really malformed requests:
- The CSRF error happens when bots hit anything which does write checks.
- The "wrong cookie domain" errors happen when bots try to use the `security.alternate-file-domain` to browse stuff like `/auth/start/`.
- The "no phcid" errors happen when bots try to go through the login flow.
All of these are clearly communicated to human users, commonly encountered by bots, and not useful to log.
I collapsed the `CSRFException` type into a standard malformed request exception, since nothing catches it and I can't really come up with a reason why anything would ever care.
Test Plan:
Hit each error through some level of `curl -H ...` and/or fakery. Verified that they showed to users before/after, but no longer log.
Hit some other real errors, verified that they log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11480
Differential Revision: https://secure.phabricator.com/D16402
Summary: This needs an `isset()` for cases when authority and packages don't completely overlap.
Test Plan:
- With a package set to trigger autoreview, created a revision.
- Observed error log, saw no more error.
- Saw package trigger autoreview properly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16398
Summary:
Ref T11473. If you write a method like `get_stuff(ids)` and then call it with an empty list of IDs, you can end up passing an empty constraint to Conduit.
If you run a `*.search` method with such a constraint, like this one:
```
{
"ids": []
}
```
...we have three possible beahviors:
# Treat it like the user passed no constraint (basically, ignore the constraint).
# Respect the constraint (return no results).
# Error.
Currently, we do (1). However, this is pretty confusing and I think clearly the worst option, since it means `get_stuff(array())` in client code will often tend to return a ton of results.
We could do (2) instead, but this is also sort of confusing (it may not be obvious why nothing matched, even though it's an application bug) and I think most reasonable client code should be doing an `if ($ids)` test: this test makes clients a little more complicated, but they can save a network call, and I think they often need to do this test anyway (for example, to show the user a different message).
This implements (3), and just considers these to be errors: this is the least tricky behavior, it's consistent with what we do in PHP, makes fairly good sense, and the only cost for this is that client code may need to be slightly more complex, but this slightly more complex code is usually better code.
Test Plan: Ran Conduit `*.search` queries with `"ids":[]` and `"phids":[]`, got sensible errors instead of runaway result sets.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11473
Differential Revision: https://secure.phabricator.com/D16396
Summary:
Ref T11473. When running `harbormaster.build.search` with a `buildables` constraint, the constraint doesn't get passed to the Query and so currently has no effect.
This piece of logic was just accidentally omitted from D16356. It is probably not used anywhere today and doesn't show up in the UI, so it's easy to overlook (I missed it in review, too).
Test Plan: Ran `harbormaster.build.search` with a `buildables` constraint, got expected filtering.
Reviewers: yelirekim, chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11473
Differential Revision: https://secure.phabricator.com/D16395
Summary:
When I wrote this the first time, only hosted repositories could be clustered.
This check wasn't removed when I allowed observed repositories to be clustered in D15986.
Test Plan:
Reloaded {nav Config > Repository Servers} page, saw more stuff locally.
Reviewed the cardinal digits between 1 and 17, inclusive.
Reviewers: chad, avivey
Reviewed By: avivey
Differential Revision: https://secure.phabricator.com/D16392
Summary:
The cluster synchronization code runs either actively (before returning a response to `git clone`, for example) or passively (routinely, as the daemons update reposiories).
The active sync runs as the web user (if running `git clone http://...`) or the VCS user (if running `git clone ssh://...`). But the passive sync runs as the daemon user.
All of these sync processes need to run actual commands as the daemon user (`git fetch ...`).
For the active ones, we must `sudo`.
For the passive ones, we're already the right user. We run the same code, and end up trying to sudo to ourselves, which `sudo` isn't happy about by default.
Depending on how `sudo` is configured and which users things are running as this might work anyway, but it's silly and if it doesn't work it requires you to go make non-obvious, weird config changes that are unintuitive and somewhat nonsensical. This is probably worse on the balance than adding a bit of complexity to the code.
Instead, test which user we're running as. If it's already the right user, don't sudo.
Test Plan:
- Ran `bin/repository update --trace` as daemon user, saw no more `sudo`.
- Ran a `git clone` to make sure that didn't break.
Reviewers: chad, avivey
Reviewed By: avivey
Differential Revision: https://secure.phabricator.com/D16391
Summary:
I converted this call incorrectly in D16092. We should pass the `PhutilURI` object, not the string version of it.
Specifically, this resulted in hitting an error like this if a replica needed synchronization:
```
[2016-08-11 21:22:37] EXCEPTION: (InvalidArgumentException) Argument 1 passed to DiffusionCommandEngine::setURI() must be an instance of PhutilURI, string given, called in...
#0 PhutilErrorHandler::handleError(integer, string, string, integer, array) called at [<phabricator>/src/applications/diffusion/protocol/DiffusionCommandEngine.php:52]
#1 DiffusionCommandEngine::setURI(string) called at [<phabricator>/src/applications/diffusion/protocol/DiffusionRepositoryClusterEngine.php:601]
...
```
Test Plan: Clusterized an observed repository, demoted a node, ran `bin/repository update Rxxx` to update, saw no typehint fatal.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D16390
Summary:
Ref T11458. Depends on D16388. Currently, we're very aggressive about closing connections in the taskmaster daemons.
This can end up taking up a lot of resources. In particular, because the outgoing port for outbound connections normally can not be reused for 60 seconds after a connection closes, we may exhaust outbound ports on the host if there's a big queue full of stuff that's being processed very quickly.
At a minimum, we //always// are holding open a `worker` connection, which we always need again right away. So even in the best case we end up opening/closing this about once per second and each daemon takes up about ~60 outbound ports when it should take up ~1.
So, make two adjustments:
- First, only close connections which we haven't issued a query on in the last 60 seconds. This should prevent us from closing connections that we'll need again immediately in most cases. In the worst case, we shouldn't be eating up any extra ports under default TCP behavior.
- Second, explicitly close connections. We were relying on implicit/GC behavior (maybe as a holdover from very long ago, before we got connection wrappers in place?), which probably did about the same thing but isn't as predictable and can't be profiled or instrumented.
Test Plan:
This is somewhat difficult to test completely convincingly in isolation since the problem behavior depends on production scales and the workload, and to some degree on configuration.
I tested that this stuff baiscally works by adding logging to connect/close and running the daemons, verifying that they churned connections a lot before this change (e.g., ~1/s even at no load) and churn rarely afterward (e.g., almost never at no load).
I ran some workload through them to make sure I didn't completely break anything.
The best real test is just seeing how production responds. Current inbound/outbound connections on `secure001` are 1,200:
```
secure001 $ netstat -t | grep :mysql | wc -l
1164
```
Current outbound from `repo001` are 18,600:
```
repo001 $ netstat -t | grep :mysql | wc -l
18663
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11458
Differential Revision: https://secure.phabricator.com/D16389
Summary:
Fixes T11446. We can raise the misleading error:
> No valid databases are configured!
...when a valid master is configured but unreachable.
Instead, more carefully raise either "nothing is configured" or "nothing is reachable".
Test Plan: Configured only a master, artificially severed it, got "nothing is reachable" instead of "nothing is configured".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11446
Differential Revision: https://secure.phabricator.com/D16386
Summary:
Fixes T11453. Currently, commit message summaries are limited to 80 bytes. This may only be 20-40 characters for CJK languages or langauges with Cyrillic script.
Increase storage size to 255, then truncate to the shorter of 255 bytes or 80 glyphs. This preserves the same behavior for latin languages, but is less tight for Russian, etc.
Some minor additional changes:
- Provide a way to ask "how much data fits in this column?" so we don't have to duplicate column lengths across summary checks or UI errors like "title too long".
- Remove the `text80` datatype, since no other columns use it and we have no use cases (or likely use cases) for it.
Test Plan:
- Made a commit with a Cyrillic title, saw reasonable summarization in UI:
{F1757522}
- Added and ran unit tests.
- Grepped for removed `SUMMARY_MAX_LENGTH` constant.
- Grepped for removed `text80` data type.
Reviewers: avivey, chad
Reviewed By: avivey
Subscribers: avivey
Maniphest Tasks: T11453
Differential Revision: https://secure.phabricator.com/D16385
Summary: Ref T11428. This documentation was a bit misleading and out of date. Update it to reflect modern reality.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11428
Differential Revision: https://secure.phabricator.com/D16384
Summary: Fixes T9410. Depends on D16382. Since all users can now view all Herald rules, we can link them in the transcripts.
Test Plan: Viewed a transcript, clicked rule names, reviewed rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9410
Differential Revision: https://secure.phabricator.com/D16383
Summary:
Ref T9410. This changes the view policy for all Herald rules to the most public policy ("All Users" for private installs, "Public" for public installs).
See T11428 for discussion of this change in greater detail. In practice, this is //approximately// how things work today anyway, since you can almost always see almost all of this information in transcripts.
I believe this narrower view policy is helpful in zero cases and slightly confusing or harmful in a number of reasonable cases.
Test Plan: Viewed personal, object and global rules as users who could and could not edit the rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9410
Differential Revision: https://secure.phabricator.com/D16382
Summary: Converts final call site to PHUIDocumentViewPro.
Test Plan: grep for PHUIDocumentView, view new Welcome Page
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16379
Summary: Fixes T11437. Provides a normal form for configuring this, instead of weird "look up the PHID and adjust things in the database" stuff.
Test Plan:
{F1753651}
{F1753652}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11437
Differential Revision: https://secure.phabricator.com/D16377
Summary:
This updates the eye logo and removes the formal wordmark "Phabricator" as an image. Instead we'll use the new updated eye logo and plain text for "Phabricator", both of which are more friendly and less industrial.
Installs that already use the `header-logo` customization setting will need to rebuild their logo to 80px x 80px. They will then also get to use plain text to whitebox their install as they see fit.
Test Plan:
Tested new logo at desktop, tablet, and mobile sizes. Set a random instance name, saw new wordmark. Created a really long wordmark of MMMMMMMMMMMM, saw text cut off so UI doesn't break. May need some additional tweaking, but I think we covered the most edge cases here.
{F1751791, size=full}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: edibiase, bjshively, yelirekim, Korvin
Maniphest Tasks: T4214, T11096
Differential Revision: https://secure.phabricator.com/D16373
Summary: Fixes T7939. This doesn't get too fancy, but allows you to write Herald rules against Calendar events.
Test Plan:
- Wrote an "add red flag to events with party in the name" rule.
- Created a "mundane meeting", didn't get flagged.
- Created a "cool party", got flagged.
- Ran rules from the Herald test console.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7939
Differential Revision: https://secure.phabricator.com/D16368
Summary: I find this fact very useful for understanding my feline companion
Test Plan: Added "Motivator: Cat Facts" to the project, nothing broke
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16374
Summary: Makes sidenav disappear again on projects/profiles, but shows it on home again (tablet views).
Test Plan: Visit Profile/Projects/Home on mobile, desktop, and tablet. See nav disappear correctly.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16369
Summary: Fixes T11420. These are selected in newest-to-oldest order from the database, but we should show them in oldest-to-newest order in the UI.
Test Plan:
Tagged a couple tasks with "A, B, C" projects, saw correct order in UI:
{F1749351}
{F1749352}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11420
Differential Revision: https://secure.phabricator.com/D16367
Summary:
Fixes T9719. Currently, the Herald "Test Console" has a big `instanceof` thing, so new adapters (like a Calendar adapter, or third-party adapters) aren't available automatically. Instead, do a standard modular thing: load the available adapters, ask which ones can test the object the user selected, then let the user pick which one they want to move forward with.
Additionally, it isn't very clear that you can't test "commit hook" rules because they rely on push state which we don't really have a good way to simulate. When the user picks a commit, we now show them the "Hook" events, but the options are disabled and explain why they can not be selected.
Test Plan:
- Ran test rules for revisions, commits, mocks, tasks, wiki documents, questions, and outbound mail.
- Plugged in a commit, got a more-helpful choice screen explaining why you do a test run of hook rules.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9719
Differential Revision: https://secure.phabricator.com/D16360
phpexcel.net currently serves a 500 page, and the top Google hit for
PHPExcel (on codeplex) gives you a site warning you that it is 3 years
out of date, and to see GitHub instead.
Update the link from Maniphest's 'please install PHPExcel to enable
export' prompt.
Summary: Adds a class for explicitly hiding the sidenav.
Test Plan: Set Config to Enable Filetree. View a diff, see tree. Press `f`, see it go away. Reload page, see persistence.
Reviewers: avivey, epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16359
Summary: This moves aphront-side-nav to use same table css display as profile nav. Slightly less code to support. Cleans up AppSearch UI, think I've gotten all the edge cases here, but bang on it, can hold until after release cut.
Test Plan: Config, Maniphest, Differential, Diffusion, Home.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16346
Summary: Fixes T11409. This syntax isn't compatible with older PHP.
Test Plan: Ran `arc lint` on the file.
Reviewers: yelirekim, chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T11409
Differential Revision: https://secure.phabricator.com/D16358
Summary: We deprecate the existing API method used to access build information from the API, but preserve its response structure after calling through to the new method. I've cordoned off the fields I needed to define in order to meet the output structure by putting those fields in a search attachment.
Test Plan:
Used the API console and looked at the list view controller for builds.
Old output structure:
```lang=json
{
"data": [
{
"id": "16823",
"phid": "PHID-HMBD-xghrwfz6luoye5rgc2hq",
"uri": "https://secure.phabricator.com/harbormaster/build/16823/",
"name": "Run Core Tests",
"buildablePHID": "PHID-HMBB-s6ykzm2jzxz4ymduztq3",
"buildPlanPHID": "PHID-HMCP-pcfxcgyoif67l3buc4zt",
"buildStatus": "passed",
"buildStatusName": "Passed"
}
],
"cursor": {
"limit": 100,
"after": "16823",
"before": null
}
}
```
New output structure:
```lang=json
{
"data": [
{
"id": 1,
"type": "HMBD",
"phid": "PHID-HMBD-qpgcmv67tzaauzayzit5",
"uri": "http://ec2-54-165-244-168.compute-1.amazonaws.com/harbormaster/build/1/",
"name": "arc lint + arc unit",
"buildStatusName": "Passed",
"buildablePHID": "PHID-HMBB-qdefith5uakkepqpjr2g",
"buildPlanPHID": "PHID-HMCP-zswbhazb7ipmaf4plygg",
"buildStatus": "passed",
"initiatorPHID": "PHID-USER-rihx4366f3aczsvc2wtb",
"dateCreated": 1450295643,
"dateModified": 1450295644,
"policy": {
"view": "users",
"edit": "users"
}
}
],
"maps": {},
"query": {
"queryKey": null
},
"cursor": {
"limit": 100,
"after": null,
"before": null,
"order": null
}
}
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16356
Summary:
It's only natural for users to be interested their own builds. We are also building in support for other sources of builds, the only formally supported way to run a build right now is via Herald.
In our third party codebase, we designate an application as the "thing" that started builds which are scheduled and managed automatically by phabricator. I believe this is a common practice elsewhere in the codebase when you're at a loss for a real human identity and you need to apply some transactions.
Test Plan: Ran some builds manually and saw them show up under the list of things I've run. Looking up builds based on those that had been started by a herald rule.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16353
Summary:
Ref T11404. This improves things by about 10%:
- Use `PhutilClassMapQuery`, which has slightly better caching.
- Do a little less work to generate pretty error messages.
- Make the "disabled" code a little faster (and sort of clearer, too?) by doing less fancy stuff.
These are pretty minor adjustments and not the sort of optimizations I'd make normally, but this code gets called ~100x (once per revision) and generates ~10 fields normally, so even small savings can amount to something.
(I also want to try to make `arc` faster in the next update, and improving Conduit performance helps with that.)
Test Plan: Ran `differential.revision.search`, saw cost drop from ~195ms to ~170ms locally.
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16355
Summary:
Ref T11404. On my system, this improves performance by 10-15% for `differential.revision.search`.
`PhutilTypeSpec` provides high quality typechecking and is great for user-facing things that need good error messages.
However, it's also a bit slow, and pointless here (the API is internal and it only has one possible option).
I think I added this after writing `checkMap` just because I wanted to use it more often. My desire is sated after finding many reasonable ways to use it to give users high-quality error messages about things like configuration files.
Test Plan: Profiled `differential.revision.search` before and after change, saw wall time drop from ~220ms to ~195ms.
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16354
Summary:
Ref T11404. Depends on D16351. Currently, both `differential.query` and `differential.revision.search` issue `2N` queries to fetch:
- dependencies for each revision; and
- projects for each revision.
Fix this:
- Take these custom fields out of Conduit so they don't load this data by default.
- For `differential.query`, put this data back in by hard coding it.
- For `differential.revision.search`, just leave it out. You can already optionally get projects efficiently, and this endpoint is a work in progress. I would tentatively be inclined to expose graph data as a "graph" extension once we need it.
This makes both methods execute in `O(1)` time (which is still 20-30 queries, but at least it's not 320 queries anymore).
Test Plan:
- Ran `differential.query`, observed no change in results but 199 fewer internal queries.
- Ran `differential.revision.search`, observed data gone from results and 200 fewer internal queries.
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16352
Summary:
Ref T11404. Depends on D16350.
Currently, custom fields can issue "N+1" queries in some cases, so querying 100 revisions issues 100 extra queries.
This affects all `*.search` endpoints for objects with custom fields, and some older endpoints (notably `differential.query`).
This change bulk loads "normal" custom fields, which gets rid of some of these queries. Instead of loading fields for each object, we build a big list of all fields and load them all at once.
The next change will tackle the remaining inefficient edge queries.
Test Plan:
- Configured a custom field with normal database storage in Differential.
- Ran `differential.query`, looking at custom fields in results for correctness.
- Ran `differential.revision.search`, looking at custom fields in results for correctness.
- In both cases, observed queries drop from `3N` to `2N` (all the "normal" custom field stuff got bulk loaded).
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16351
Summary:
Ref T11404. Currently, SearchEngineAttachments can bulk-load data but SearchEngineExtensions can not.
This leads to poor performance of custom fields. See T11404 for discussion.
This changes the API to support a bulk load + format pattern like the one Attachments use. The next change will use it to bulk-load custom field data.
Test Plan:
- Ran `differential.query`, `differential.revision.search` as a sanity check.
- No behavioral changes are expected
- See next revision.
Reviewers: yelirekim, chad
Reviewed By: chad
Maniphest Tasks: T11404
Differential Revision: https://secure.phabricator.com/D16350
Summary:
We're picking three useful groups of build statuses to provide as default queries:
- Stuff not yet building
- Stuff building
- Stuff which has finished building
These are reasonable buckets for builds since (unlike most objects in phabricatorland) users are generally waiting impatiently for the machine to do something for them, rather than being responsible for doing something with the machine.
Test Plan: clicked around the search engine and enjoyed my defaults
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D16349
Summary:
This supports a few basic use cases that aren't served by the buildable search engine:
- I'm trying to discover when the last time that this particular build plan failed was.
- I want to know if any builds have deadlocked.
- At a glance, I'm more interested in what build plans are running, not which buildables are being built. This is more often than not the case.
Test Plan: {F1744003}
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D16347
Summary: Fixes T11392. If some tasks are restricted, we only have PHIDs for them, not objects. Just use the PHIDs instead.
Test Plan: {F1741335}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11392
Differential Revision: https://secure.phabricator.com/D16345
Summary:
Ref T4788. This gives us a new level of graceful degradation, so now we show:
- Zero through 100 connected tasks: whole graph.
- More than 100 connnected tasks, but fewer than 100 direct parents/subtasks: just parents and subtasks, with "..." to hint that the graph is cut off.
- More than 100 parents and children: just the "sorry, too much stuff" error message.
Test Plan: {F1740882}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16344
Summary:
Ref T4788. Add links to jump to search results with a task's parents or subtasks. This allows relationships to remain useful if there are a zillion of them, and you can sort/filter stuff more easily.
Language might need some tweaking at some point, feeling a little un-brainy today with wordstuff.
Test Plan:
{F1740855}
{F1740856}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788
Differential Revision: https://secure.phabricator.com/D16343
Summary:
Fixes T11386. Ref T4788.
- Apparently fix weird strikethrough effect? Spooky!
- Provide a little icon hint in the left column about which tasks are direct parents/children, vs just reachable somehow. I don't think this is super useful/important, but seems maybe nice?
Test Plan: {F1740779}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788, T11386
Differential Revision: https://secure.phabricator.com/D16342
Summary:
Ref T8126. Ref T4788. This adds a way to query by parent or subtask.
I plan to link to this from the task graph (e.g., {nav View > Search Subtasks} or similar, in a dropdown on the "Task Graph" element) as a way to let us bail out if tasks have 300 subtasks and send the user to a big query result list. That'll give us more flexibility to tailor the UI for reasonable numbers of tasks.
There's no UI for this unless you specify a query yourself, so the only ways to get to it are:
- Manually put `?parentIDs=...` into the URI.
- Use the API.
- Future link from task graphs.
It doesn't seem too useful to me on its own, outside of the context of links from tasks.
Test Plan:
- Manually put `?parentIDs=...` and `?subtaskIDs=...` into Maniphest query UI, got expected results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4788, T8126
Differential Revision: https://secure.phabricator.com/D16341
Summary:
Ref T8126. See that task for discussion. This change:
- Updates language to be more consistent ("Parents", "Subtasks") since I moved us away from the often-confusing "Block" language in T4788.
- Fixes bugs with finding the wrong set of tasks if tasks have a mixture of open and closed subtasks or parents.
Test Plan:
- Created four tasks: no subtasks, one closed subtask, one open subtask, mixture of open and closed subtasks.
- Created four more tasks: no parents, one closed parent, one open parent, mixture of open and closed parents.
- Searched for all this stuff, got the proper results:
{F1740683}
{F1740684}
{F1740685}
{F1740686}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8126
Differential Revision: https://secure.phabricator.com/D16340
Summary: Ref T11326. This adds prev/next links for recurring events (ala D16179) and moves the "accept/decline" buttons closer to the invite list. This might need some fiddling, but should be a little more human-friendly.
Test Plan: {F1740541}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11326
Differential Revision: https://secure.phabricator.com/D16339
Summary: Ref T8116. Puts a list of packages on the publisher page, and a list of versions on the package page.
Test Plan: Viewed a publisher, saw packages. Viewed a package, saw versions. Looked at list views.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8116
Differential Revision: https://secure.phabricator.com/D16321
Summary: Ref T8116. Add search-by-name and per-package / per-publisher search to Packages.
Test Plan: Searched publishers, packages, versions by name. Searched packages by publisher. Searched versions by package.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8116
Differential Revision: https://secure.phabricator.com/D16320
Summary:
Ref T8116. This adds a control for creating publishers (default: administrators) and default publisher/package edit controls.
I've left the edit defaults at "no one" for now to force you to select a policy. This might be something to look at later.
Test Plan: Created publishers, packages. Tried to create publishers with "can create" policy set restrictively.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8116
Differential Revision: https://secure.phabricator.com/D16319
Summary:
Ref T8116. A version has:
- a package (like "Arcanist") which it belongs to;
- a name (like "v3.1.5").
The name is immutable and unique, like the package key and publisher key.
Policy stuff:
- Versions have the exact same policies as their packages.
- You must be able to edit a package to create new versions of it.
This is still entirely uninteresting.
Test Plan: {F1731703}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8116
Differential Revision: https://secure.phabricator.com/D16316
Summary:
Ref T8116. A package has:
- a publisher (like "Phacility"), from the previous revision;
- a name (like "Arcanist");
- a package key (like "arcanist").
The package key is immutable, like the publisher key.
This gives a package a full key like "phacility/arcanist".
Policy stuff:
- You must be able to view a publisher to view a package (currently, everyone can always see all publishers).
- You must be able to edit a publisher to create a new package inside it.
- Packages have separate view/edit permissions.
This still does nothing interesting.
Test Plan: {F1731663}
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T8116
Differential Revision: https://secure.phabricator.com/D16315
