Summary: There's no guarantee that the local path has a trailing "/". We
should probably guarantee that at some point, but just add one
unconditionally for now.
Auditors: btrahan
Summary: Ref T4189. Fixes T2066. Mercurial has a //lot// of hooks so I'm not 100% sure this is all we need to install (we may need separate hooks for tags/bookmarks) but it should cover most of what we're after at least.
Test Plan:
- `bin/repository pull`'d a Mercurial repo and got a hook install.
- Pushed to a Mercurial repository over SSH and HTTP, with good/bad hooks. Saw hooks fire.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2066, T4189
Differential Revision: https://secure.phabricator.com/D7685
Summary:
Ref T4189. This adds SVN support, which was a little more messy than I though. Principally, we can not use `PHABRICATOR_USER` for Subversion, because it strips away the entire environment for "security reasons".
Instead, use `--tunnel-user` plus `svnlook author` to figure out the author.
Also fix "ssh://" clone URIs, which needs to be "svn+ssh://".
Test Plan:
- Made SVN commits through the hook.
- Made Git commits, too, to make sure I didn't break anything.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7683
Summary:
Ref T4189. T4189 describes most of the intent here:
- When updating hosted repositories, sync a pre-commit hook into them instead of doing a `git fetch`.
- The hook calls into Phabricator. The acting Phabricator user is sent via PHABRICATOR_USER in the environment. The active repository is sent via CLI.
- The hook doesn't do anything useful yet; it just veifies basic parameters, does a little parsing, and exits 0 to allow the commit.
Test Plan:
- Performed Git pushes and pulls over SSH and HTTP.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7682
Summary: `LANG=C` is smooshing UTF-8 in some cases. See IRC.
Test Plan: User confirmed this works.
Reviewers: btrahan, asherkin
Reviewed By: asherkin
CC: aran
Differential Revision: https://secure.phabricator.com/D7659
Summary: Fixes T4155. See discussion in T4155.
Test Plan: @mbishopim3 confirmed this fixes his issue.
Reviewers: btrahan, chad
Reviewed By: chad
CC: mbishopim3, aran
Maniphest Tasks: T4155
Differential Revision: https://secure.phabricator.com/D7646
Summary:
Ref T4038. This adds everything except the actual pushing part for mirrors.
This isn't the most beautiful or sophisticated UI, but I want get the authoritative repositories self-hosted and get users beta-ing hosting as soon as possible. We can do transactions, etc., later on.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4038
Differential Revision: https://secure.phabricator.com/D7632
Summary: Fixes T4122. Ref T2230. Instead of storing credentials on each repository, store them in Passphrase. This allows easy creation/management of many repositories which share credentials.
Test Plan:
- Upgraded repositories.
- Created and edited repositories.
- Pulled HTTP and SSH repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230, T4122
Differential Revision: https://secure.phabricator.com/D7629
Summary: Show SSH user on git-over-ssh repositories and hide both username and password for other repos.
Test Plan: View repository details page in diffusion, Clone URI should appear with a username (taken from repo config) and any http(s) repos should be without usernames.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4147
Differential Revision: https://secure.phabricator.com/D7631
Summary: D7590 made path construction more consistent, but affected this callsite if a subpath is configured. Currently, we end up with double `@@` in the URI.
Test Plan:
- Ran unit tests.
- Ran `bin/repostitory discover`.
Reviewers: staticshock, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7619
Summary:
Fixes T4041. We currently detect when "origin" is incorrect, but can do better:
- When "origin" is missing, we can add it. This happens for Git 1.7.1 -- see T4041.
- When "origin" is wrong, we can fix it automatically if we control the repository.
We only need to fail when origin exists, is wrong, and we aren't in charge of the repository.
Test Plan: Ran `bin/repository discover X` on a repository with a good origin, no origin, a bad-but-under-control origin, and a bad-out-of-control origin. Got the right behavior in all cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, champo
Maniphest Tasks: T4041
Differential Revision: https://secure.phabricator.com/D7614
Summary:
This cleans up some garbage:
- We were specifying environmental variables with `X=y git ...`, but now have `setEnv()` on both `ExecFuture` and `PhutilExecPassthru`. Use `setEnv()`.
- We were specifying the working directory with `(cd %s && git ...)`, but now have `setCWD()` on both `ExecFuture` and `PhutilExecPassthru`. Use `setCWD()`.
- We were specifying the Git credentials with `ssh-agent -c (ssh-add ... && git ...)`. We can do this more cleanly with `GIT_SSH`. Use `GIT_SSH`.
- Since we have to write a script for `GIT_SSH` anyway, use the same script for Subversion and Mercurial.
This fixes two specific issues:
- Previously, we were not able to set `-o StrictHostKeyChecking=no` on Git commands, so the first time you cloned a git repo the daemons would generally prompt you to add `github.com` or whatever to `known_hosts`. Since this was non-interactive, things would mysteriously hang, in effect. With `GIT_SSH`, we can specify the flag, reducing the number of ways things can go wrong.
- This adds `LANG=C`, which probably (?) forces the language to English for all commands. Apparently you need to install special language packs or something, so I don't know that this actually works, but at least two users with non-English languages have claimed it does (see <https://github.com/facebook/arcanist/pull/114> for a similar issue in Arcanist).
At some point in the future I might want to combine the Arcanist code for command execution with the Phabricator code for command execution (they share some stuff like LANG and HGPLAIN). However, credential management is kind of messy, so I'm adopting a "wait and see" approach for now. I expect to split this at least somewhat in the future, for Drydock/Automerge if nothing else.
Also I'm not sure if we use the passthru stuff at all anymore, I may just be able to delete that. I'll check in a future diff.
Test Plan: Browsed and pulled Git, Subversion and Mercurial repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7600
Summary:
Ref T2230. SVN has some weird rules about path construction. Particularly, if you're missing a "/" in the remote URI right now, the change parsing step doesn't build the right paths.
Instead, build the right paths more intelligently.
Test Plan: Added and executed unit tests. Imported an SVN repo.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, jpeffer
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7590
Summary:
A usable, Land to GitHub flow.
Still to do:
- Refactor all git/hg stratagies to a sane structure.
- Make the dialogs Workflow + explain why it's disabled.
- Show button and request Link Account if GH is enabled, but user is not linked.
- After refreshing token, user ends up in the settings stage.
Hacked something in LandController to be able to show an arbitrary dialog from a strategy.
It's not very nice, but I want to make some more refactoring to the controller/strategy/ies anyway.
Also made PhabricatorRepository::getRemoteURIObject() public, because it was very useful in getting
the domain and path for the repo.
Test Plan:
Went through these flows:
- load revision in hosted, github-backed, non-github backed repos to see button as needed.
- hit land with weak token - sent to refresh it with the extra scope.
- Land to repo I'm not allowed - got proper error message.
- Successfully landed; Failed to apply patch.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D7555
Summary:
Ref T4039. This is mostly to deal with that, to prevent the security issues associated with mutable local paths. The next diff will lock them in the web UI.
I also added a confirmation prompt to `bin/repository delete`, which was a little scary without one.
See one comment inline about the `--as` flag. I don't love this, but when I started adding all the stuff we'd need to let this transaction show up as "Administrator" it quickly got pretty big.
Test Plan: Ran `bin/repository edit ...`, saw an edit with a transaction show up on the web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4039
Differential Revision: https://secure.phabricator.com/D7579
Summary:
Ref T2230. As far as I can tell, getting SVN working over HTTP is incredibly complicated. It's all DAV-based and doesn't appear to have any kind of binary we can just execute and pass requests through to. Don't support it for now.
- Disable it in the UI.
- Make sure all the error messages are reasonable.
Test Plan: Tried to HTTP an SVN repo. Tried to clone a Git repo with SVN, got a good error message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7562
Summary:
Depends on D7500.
This seemed like a pretty good idea once I thought of it. Instead of having some custom triggering logic instead Harbormaster, I figured it best to leverage all of Herald's power so that users can create rules to apply builds to commits and differential revisions. This gives the added advantage that they can trigger off builds for particular types of revisions and commits, which seems like it could be really useful (e.g. run extra tests against revisions that touch sensitive areas of the code).
Test Plan: Ran the usual daemons + the Harbormaster daemon. Pushed a commit to the repository and saw both the buildable and build get created when the commit worked picked it up. Submitted a diff and saw both the buildable and build get created when the Herald rules were evaluated for the diff.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, hwinkel
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7501
Summary:
See <https://github.com/facebook/phabricator/issues/433>. We were missing a "^" here.
This should be moved over to transactions soon and then we can get rid of the duplication. :/
Test Plan: Tried to create a repository with callsign "9X", got a helpful error about "ALL UPPERCASE LETTERS".
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7531
Summary: Ref T4068. Partly, this moves discovery to the more unit-testable PhabricatorRepositoryDiscoveryEngine. It also fixes some issues, see inlines.
Test Plan: In a Mercurial repository, ran `bin/repository discover --repair`, verified commits came out topographically sorted. Ran without `--repair` and in various other contexts, like with no commits to discover and some-but-not-all commits to discover.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4068
Differential Revision: https://secure.phabricator.com/D7518
Summary: Ref T4068. Adds a command to list all commits in an "importing" status. This will allow users to use `reparse.php` to diagnose and repair issues.
Test Plan:
- Ran `bin/repository importing P`, etc.
- Used `reparse.php` to reparse some commit stages and saw status update correctly.
- Ran on a repo with no importing commits.
- Ran with `... --simple | xargs`, which saves us having to put an `awk` or something in there for users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4068
Differential Revision: https://secure.phabricator.com/D7515
Summary:
Ref T4068. In some cases like that one, I anticipate a repository not fully importing when a handful of random commits are broken. In the long run we should just deal with that properly, but in the meantime provide an administrative escape hatch so you can mark the repository as imported and get it running normally.
The major reason to do this is that Herald, Feed, Harbormaster, etc., won't activate until a repository is "imported".
Test Plan:
- Tried to mark an imported repository as imported, got an "already imported" message.
- Same for not-imported.
- Marked a repository not-imported.
- Marked a repository imported.
- Marked a repository not-imported, then waited for the daemons to mark it imported again automatically.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, kbrownlees
Maniphest Tasks: T4068
Differential Revision: https://secure.phabricator.com/D7514
Summary: Ref T1493. Consolidate these a bit; they might need some more magic once we do `--noupdate` checkouts. Mostly just trying to clean up and centralize this code a bit.
Test Plan: Viewed and `bin/repository discover`'d Mercurial repos with and without any branches.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1493
Differential Revision: https://secure.phabricator.com/D7480
Summary:
Ref T2230. This will need some more refinement, but basically it adds a "Create" vs "Import" step before we go through the paged workflow.
- If you choose "Create", we skip the remote URI / auth stuff, and then set the "hosted" flag.
- If you choose "Import", we do what we do now.
Test Plan: Created and imported repos.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7475
Summary:
Hosted repositories only sometimes survive the pull/discover phases right now, due to issues like:
- Pull tries to `git clone`, but should `git init`.
- Mercurial doesn't handle empty repositories with on branches.
- SVN tries to connect to an invalid remote.
- None of them set the INIT repo flag correctly, so status doesn't get updated properly in the UI.
Fix all this stuff.
Test Plan:
- For each of Git, SVN and Mercurial:
- Created a new repository from the web UI in a deactivated state.
- Made it hosted.
- Manually ran pull/discover.
- Verified we end up with initialized, empty repositories in consistent states.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7474
Summary:
- Warn about "Read/Write" instead of disabling it, to prevent edits which mutate it after changing a hosted repository to an unhosted one.
- Warn about authenticated connections with HTTPS auth disabled, and link to the relevant setting.
- When "Autoclose" is disabled, show that "Autoclose Branches" won't have an effect.
- For hosted repositories, show the HTTP and SSH clone URIs.
- Make them easy to copy/paste.
- Link to credential management.
- Show if they're read-only.
- This could be a bit nicer-looking than it is.
Test Plan: Looked at repositories in a bunch of states and made various edits to them.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7471
Summary:
See <https://github.com/facebook/phabricator/issues/425>. There are some ways that the change parsers may not reach `finishParse()`, but we now need them to in order to mark the commit imported, advance the progress bar, and eventually kick the repository out of IMPORTING status.
Take all the copy/pasted code in the parsers and move it into the parent. Specifically, this is:
- Printing a status message about starting a parse;
- checking for bad commits;
- queueing the next parse stage; and
- marking the import step complete.
Test Plan: Used `reparse.php --change` to reparse Git, SVN and Mercurial repos.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7470
Summary: This allows users to set their HTTP access passwords via Diffusion interface.
Test Plan: Clicked the "Set HTTP Access Password" link, set a password and saw it appear in the DB.
Reviewers: #blessed_reviewers, hach-que, btrahan
Reviewed By: hach-que
CC: Korvin, epriestley, aran, jamesr
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7462
Summary:
Ref T2350. Fixes T2231.
- Adds log flags around discovery.
- Adds message flags for "needs update". This is basically an out-of-band hint to the daemons that a repository should be pulled sooner than normal. We set the flag when users push a revision, and expose a Conduit method that `arc land` will be able to use.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2350, T2231
Differential Revision: https://secure.phabricator.com/D7467
Summary:
`RepositoryStatusMessage` is basically a key/value table associated with a repository that I'm using to let the daemons store the most recent event of a given type, so we can easily show it on the status dashboard. I think this will be a lot easier for users to figure out than digging through logfiles.
I'm also going to write the "this needs a pull" status here eventually, for reducing the time lapse between pushes and discovery.
- Add storage for these messages.
- Have the pull engine populate the INIT phase. I'll do the FETCH phase next.
- Update the status readout to show all the various states.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7461
Summary: This moved into Diffusion in D7458 and is now presented in a much cleaner, more targeted way.
Test Plan: Loaded `/repository/`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7459
Summary:
Replace the blanket "daemons not running" warning with a lot more specific detail, to try to make it easier for users to figure out how to set up repositories correctly.
The next change here will add some additional status information from the daemons, so this panel can report results in greater detail.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7458
Summary: Minor cleanup. Make the "imported" check less strict (we don't need owners or herald to show change status). Export the "imported" flag over Conduit.
Test Plan: Viewed tag table. Viewed partially imported repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7455
Summary: I'm planning to add more detailed info to Diffusion itself, but catch the big issue here.
Test Plan: Hit config issue locally, then resolved it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7439
Summary: The new "importStatus" property provides a much stronger and more consistent version of this flag. The only callsite was removed by D7452.
Test Plan: Used `grep` to check for callsites and found none.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7453
Summary:
Ref T2716.
- Serve from `DiffusionCommitQuery`, not `PhabricatorAuditCommitQuery` (which should probably die).
- Fix logic for `limit`, which incorrectly failed to display the "Showing %d branches." text.
- Clean up things a touch.
- I didn't end up actually needing `needCommitData()`, but left it in there since I think it will be needed soon.
- Removed a "TODO" because I don't remember what "etc etc" means.
Test Plan: Looked at branches in several repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2716
Differential Revision: https://secure.phabricator.com/D7451
Summary: Ref T2230. This cleans up D7442, by using `git for-each-ref` everywhere we can, in a basically reasonable way.
Test Plan:
In bare and non-bare repositories:
- Ran discovery with `bin/repository discover`;
- listed branches on `/diffusion/X/`;
- listed tags on `/diffusion/X/`;
- listed tags, branches and refs on `/diffusion/rXnnnn`.
Reviewers: btrahan, avivey
Reviewed By: avivey
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7447
Summary:
Ref T2230. Although all the non-bare commands //run// fine in bare repos, not all of them do exactly the same thing.
This could use further cleanup, but at least get it working again for now.
Test Plan: Ran `bin/repository pull`, `bin/repository discover`, viewed Diffusion (looked at branch table), viewed a commit (looked at "Branches"), for bare and non-bare git repos.
Reviewers: avive, btrahan, avivey
Reviewed By: avivey
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7442
Summary:
Relocated files aren't treated as newly created files by the worker. This
can lead to the worker trying to look up information about deleted files
in the wrong location.
Test Plan: See T4030
Reviewers: #blessed_reviewers, epriestley
Reviewed By: epriestley
CC: epriestley, aran
Maniphest Tasks: T4030
Differential Revision: https://secure.phabricator.com/D7432
Summary:
This doesn't really impact anything very much, but is a little cleaner than cloning repositories with a working copy. It's somewhat important for allowing pushes, because you can't push to a checked-out branch.
Mercurial has a similar option (`--noupdate`) but leave that alone for now.
The origin stuff was mostly for sanity/explicitness purposes -- I believe it's safe to remove in all non-ridiculous cases. Git fails with it in bare repositories (it automatically creates an `origin`, but doesn't create the local refs for it, or something).
Test Plan: Nuked a repo, re-cloned it, pulled and updated it several times. Browsed both bare and non-bare repos in Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7430
Summary:
Fixes T3217. Ref T776. Ref T1493. Broadly, this introduces a mechanism which works like this:
- When a repository is created, we set an "importing" flag.
- After discovery completes, we check if a repository has no importing commits. Basically, this is the first time we catch up to HEAD.
- If we're caught up, clear the "importing" flag.
This flag lets us fix some issues:
- T3217. Currently, when you import a new repository and users have rules like "Email me on every commit ever" or "trigger an audit on every commit", we take a bunch of publish actions. Instead, implicitly disable publishing during import.
- An imported but un-pulled repository currently has an incomprehensible error on `/diffusion/X/`. Fix that.
- Show more cues in the UI about importing.
- Made some exceptions more specific.
Test Plan:
This is the new screen for a completely new repo, replacing a giant exception:
{F75443}
- Created a repository, saw it "importing".
- Pulled and discovered it.
- Processed its commits.
- Ran discovery again, saw import flag clear.
- Also this repository was empty, which hit some of the other code.
This is the new "parsed empty repository" UI, which isn't good, but is less broken:
{F75446}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, hach-que
Maniphest Tasks: T3607, T1493, T776, T3217
Differential Revision: https://secure.phabricator.com/D7429
Summary:
Fixes T3416. Fixes T1733.
- Adds a flag to the commit table showing whether or not we have parsed it.
- The flag is set to `0` initially when the commit is discovered.
- The flag is set to `1` when the changes are parsed.
- The UI can now use the flag to distinguish between "empty commit" and "commit which we haven't imported changes for yet".
- Simplify rendering code a little bit.
- Fix an issue with the Message parser for empty commits.
- There's a key on the flag so we can do `SELECT * FROM repository_commit WHERE repositoryID = %d AND importStatus = 0 LIMIT 1` soon, to determine if a repository is fully imported or not. This will let us improve the UI (Ref T776, Ref T3217).
Test Plan:
- Ran `bin/storage upgrade -f`.
- Created an empty commit.
- Without the daemons running, ran `bin/repository pull GTEST` and `bin/repository discover GTEST`.
- Viewed web UI to get the first screenshot ("Still Importing...").
- Ran the message and change steps with `scripts/repository/reparse.php`.
- Viewed web UI to get the second screenshot ("Empty Commit").
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T776, T1733, T3416, T3217
Differential Revision: https://secure.phabricator.com/D7428
Summary:
- Don't try to pull hosted repos.
- Also, fix the `--verbose` + `--trace` interaction for `bin/repository`.
- Also, fix a couple of unit tests which got tweaked earlier.
Test Plan:
$ ./bin/repository pull GTEST --verbose
Pulling 'GTEST'...
Repository "GTEST" is hosted, so Phabricator does not pull updates for it.
Done.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7427
Summary:
Mostly ripped from D7391, with some changes:
- Serve repositories at `/diffusion/X/`, with no special `/git/` or `/serve/` URI component.
- This requires a little bit of magic, but I got the magic working for Git, Mercurial and SVN, and it seems reasonable.
- I think having one URI for everything will make it easier for users to understand.
- One downside is that git will clone into `X` by default, but I think that's not a big deal, and we can work around that in the future easily enough.
- Accept HTTP requests for Git, SVN and Mercurial repositories.
- Auth logic is a little different in order to be more consistent with how other things work.
- Instead of AphrontBasicAuthResponse, added "VCSResponse". Mercurial can print strings we send it on the CLI if we're careful, so support that. I did a fair amount of digging and didn't have any luck with git or svn.
- Commands we don't know about are assumed to require "Push" capability by default.
No actual VCS data going over the wire yet.
Test Plan:
Ran a bunch of stuff like this:
$ hg clone http://local.aphront.com:8080/diffusion/P/
abort: HTTP Error 403: This repository is not available over HTTP.
...and got pretty reasonable-seeming errors in all cases. All this can do is produce errors for now.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7417
Summary:
Basically straight from D7391. The differences are basically:
- Policy stuff is all application-scope instead of global-scope.
- Made a few strings a little nicer.
- Deleted a bit of dead code.
- Added a big "THIS DOESN'T WORK YET" warning.
Test Plan: See screenshots.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7416
Summary: No editing or view yet, just adds the schema and a policy default. Part of D7391.
Test Plan: `bin/storage upgrade`
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7415
Summary: Ref T2231. Get rid of the old create controller and make the button go to the new stuff instead. This will eventually get cleaned up more, but I don't have a clear plan for Arcanist Projects yet.
Test Plan: Clicked button, hit new workflow.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7414
Summary:
Ref T2231. This:
- Activates the new multi-step workflow, and exposes it in the UI.
- Adds "can create", "default view" and "default edit" capabilities.
- Provides a default value for `repository.default-local-path` and forces repositories into it by default. It's still editable, but Phabricator gets it correct (for some definition of correct) by default now.
Test Plan: Created some new repositories with the new workflow.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1286, T2231
Differential Revision: https://secure.phabricator.com/D7413
Summary:
Ref T2231. I didn't port these options over, so they're still supported but have no edit UI:
- Pull Frequency (confusing/not useful, I think?)
- Default Owners Path (probably used only by Facebook and only in the E repository)
- Show user in public repository URL (probably mostly obsolete with hosting?)
We can add those back if users notice, but they seem like the three least useful options so I'm going to see if we can get away with removing them.
Test Plan: Clicked "Edit" from Repositories, got kicked into the nice new Diffusion edit UI instead of the old one.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7410
Summary: Ref T2231. This just moves the "Delete" dialog from Repositories to Diffusion. This dialog just shows instructions and isn't interesting.
Test Plan: {F75093}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7412
Summary: Fixes T1286. Ref T2231. See previous diffs; same as the others but does "Local Path".
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1286, T2231
Differential Revision: https://secure.phabricator.com/D7409
Summary:
Ref T2231. Allows you to edit the remote URI and credentials.
This is a little bit funky because I'm reusing some of the pages on the new (not-yet-hooked-up) create form. Specifically, it had pages like this:
- Repo Type
- Name/Callsign/Remote
- Auth
- Done
I split "Name/Callsign/Remote" into "Name/Callsign" and "Remote", then when editing the remote I just take you through "Remote" and "Auth" and then back. This lets us reuse the giant pile of protocol/URI sanity checking logic and ends up being pretty clean, although it's a little weird that the "Create" controller does both full-create and edit-remote.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7405
Summary: Ref T2231. Brings "Notify/Publish" and "Autoclose" to the new UI.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7402
Summary: See title. Fixes T1809.
Test Plan:
verified each type that has flaggable interface still can be flagged
verified that new custom query filter works
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1809
Differential Revision: https://secure.phabricator.com/D7392
Summary:
While we mostly have reasonable effective object accessibility when you lock a user out of an application, it's primarily enforced at the controller level. Users can still, e.g., load the handles of objects they can't actually see. Instead, lock the queries to the applications so that you can, e.g., never load a revision if you don't have access to Differential.
This has several parts:
- For PolicyAware queries, provide an application class name method.
- If the query specifies a class name and the user doesn't have permission to use it, fail the entire query unconditionally.
- For handles, simplify query construction and count all the PHIDs as "restricted" so we get a UI full of "restricted" instead of "unknown" handles.
Test Plan:
- Added a unit test to verify I got all the class names right.
- Browsed around, logged in/out as a normal user with public policies on and off.
- Browsed around, logged in/out as a restricted user with public policies on and off. With restrictions, saw all traces of restricted apps removed or restricted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7367
Summary: Fixes T4001. I broke this some time ago and no one has complained. I don't think it gets much use, and we haven't added it for the newer apps. Just get rid of it rather than adapt the URIs for ApplicationSearch.
Test Plan: Unit tests, sent myself some email.
Reviewers: zeeg, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4001
Differential Revision: https://secure.phabricator.com/D7355
Summary: I touched this code recently but it needs an unusual special case because we call through with the "omnipotent user" from the daemons. As per the TODO below, this will all get cleaned up at some point.
Test Plan: Will make @poop verify.
Reviewers: btrahan, poop
Reviewed By: poop
CC: poop, aran
Differential Revision: https://secure.phabricator.com/D7356
Summary:
Ref T603. This cleans up an existing callsite in the policy filter, and opens up some stuff in the future.
Some policy objects don't have real PHIDs:
PhabricatorTokenGiven
PhabricatorSavedQuery
PhabricatorNamedQuery
PhrequentUserTime
PhabricatorFlag
PhabricatorDaemonLog
PhabricatorConduitMethodCallLog
ConduitAPIMethod
PhabricatorChatLogEvent
PhabricatorChatLogChannel
Although it would be reasonable to add real PHIDs to some of these (like `ChatLogChannel`), it probably doesn't make much sense for others (`DaemonLog`, `MethodCallLog`). Just let them return `null`.
Also remove some duplicate `$id` and `$phid` properties. These are declared on `PhabricatorLiskDAO` and do not need to be redeclared.
Test Plan: Ran the `testEverythingImplemented` unit test, which verifies that all classes conform to the interface.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7306
Summary: Ref T1279. Prerequisite for adding icons or other type information to tokenizers, since we don't currently have enough information to prefill them when rendering things from the server side. By passing handles in, the tokenizer can extract type information.
Test Plan:
- Searched by user in Audit.
- Sent Conpherence from profile page.
- Tried to send an empty conpherence.
- Searched Countdown by user.
- Edited CCs in Differential.
- Edited reviewers in Differential.
- Edited a commit's projects.
- Searched lint by owner.
- Searched feed by owner/project.
- Searched files by owner.
- Searched Herald by owner.
- Searched Legalpad by owner.
- Searched Macro by owner.
- Filtered Maniphest reports by project.
- Edited CCs in Maniphest.
- Searched Owners by owner.
- Edited an Owners package.
- Searched Paste by owner.
- Searched activity logs by owner.
- Searched for mocks by owner.
- Edited a mock's CCs.
- Searched Ponder by owner.
- Searched projects by owner.
- Edited a Releeph project's pushers.
- Searched Releeph by requestor.
- Edited "Uses Symbols" for an Arcanist project.
- Edited all tokenizers in main search.
- Searched Slowvote by user.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7248
Summary:
Ref T603. Ref T1279. Further improves transaction and policy support for Herald.
- Instead of deleting rules (which wipes out history and can't be undone) allow them to be disabled.
- Track disables with transactions.
- Gate disables with policy controls.
- Show policy and status information in the headers.
- Show transaction history on rule detail screens.
- Remove the delete controller.
- Support disabled queries in the ApplicationSearch.
Test Plan:
- Enabled and disabled rules.
- Searched for enabled/disabled rules.
- Verified disabled rules don't activate.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279, T603
Differential Revision: https://secure.phabricator.com/D7247
Summary: Ref T1279. Show separate sections for "Reviewers" and "Project Reviewers" (Differential) and for "Auditors" and "Package/Project Auditors" (Diffusion/Audit).
Test Plan:
- Looked at a commit. Saw separation.
- Looked at a revision. Saw separation.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7233
Summary: Ref T603. Swaps out most `PhabricatorFile` loads for `PhabricatorFileQuery`.
Test Plan:
- Viewed Differential changesets.
- Used `file.info`.
- Used `file.download`.
- Viewed a file.
- Deleted a file.
- Used `/Fnnnn` to access a file.
- Uploaded an image, verified a thumbnail generated.
- Created and edited a macro.
- Added a meme.
- Did old-school attach-a-file-to-a-task.
- Viewed a paste.
- Viewed a mock.
- Embedded a mock.
- Profiled a page.
- Parsed a commit with image files linked to a revision with image files.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7178
Summary:
Ref T603. I got most of this earlier, but finish it up.
- Make a couple of controllers public; pretty much everything in Diffusion has implicit policy checks as a result of building a `DiffusionRequest`.
- Add an "Edit" capability to commits.
- Swap out the comment thing for commits.
- Disable actions if the user can't take them.
Test Plan: Viewed a bunch of interfaces while logged out, got appropriate results or roadblocks.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7152
Summary:
Ref T603. Adds clarifying text which expands on policies and explains exceptions and rules. The goal is to provide an easy way for users to learn about special policy rules, like "task owners can always see a task".
This presentation might be a little aggressive. That's probably OK as we introduce policies, but something a little more tempered might be better down the road.
Test Plan: See screenshot.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7150
Summary:
Ref T603. When a diff is attached to a revision, try to guess the repository if possible. In cases where we succeed, this automatically gives us intuitive policy behavior (i.e., you can see a revision if you can see the repository the change is against).
I pulled this into a funky little "Lookup" class for two reasons:
- It's used in two places;
- I anticipate that we might need to add some sort of `explainWhy()` method if users find the heuristics confusing.
Test Plan: Created and updated revisions, saw them pick up the correct repository association. Ran Herald dry run against associable and nonassociable revisions, saw correct values populate.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7147
Summary: Ref T603. Makes the majority of reads policy aware (and pretty much all the important ones).
Test Plan:
- Created a comment with `differential.createcomment`.
- Created a new revision with `arc diff` in order to exercise `differential.creatediff`.
- Created an inline comment with `differential.createinline`.
- Added a comment to a revision.
- Edited an inline comment.
- Edited a revision.
- Wrote "Depends on ..." in a summary, saved, verified link was created.
- Browsed a file in Diffusion.
- Got past the code I changed in the Releeph request thing.
- Edited a Releeph request.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7136
Summary: Ref T603. Move to real Query classes.
Test Plan:
- Ran `phd debug pull X` (where `X` does not match a repository).
- Ran `phd debug pull Y` (where `Y` does match a repository).
- Ran `phd debug pull`.
- Ran `repository pull`.
- Ran `repository pull X`.
- Ran `repository pull Y`.
- Ran `repository discover`.
- Ran `repository delete`.
- Ran `grep`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7137
Summary: Ref T603. This swaps almost all queries against the repository table over to be policy aware.
Test Plan:
- Made an audit comment on a commit.
- Ran `save_lint.php`.
- Looked up a commit with `diffusion.getcommits`.
- Looked up lint messages with `diffusion.getlintmessages`.
- Clicked an external/submodule in Diffusion.
- Viewed main lint and repository lint in Diffusion.
- Completed and validated Owners paths in Owners.
- Executed dry runs via Herald.
- Queried for package owners with `owners.query`.
- Viewed Owners package.
- Edited Owners package.
- Viewed Owners package list.
- Executed `repository.query`.
- Viewed "Repository" tool repository list.
- Edited Arcanist project.
- Hit "Delete" on repository (this just tells you to use the CLI).
- Created a repository.
- Edited a repository.
- Ran `bin/repository list`.
- Ran `bin/search index rGTESTff45d13dffcfb3ea85b03aac8cc36251cacdf01c`
- Pushed and parsed a commit.
- Skipped all the Drydock stuff, as it it's hard to test and isn't normally reachable.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7132
Summary: I'd like to reuse this for other content areas, renaming for now. This might be weird to keep setForm, but I can fix that later if we need.
Test Plan: reload a few forms in maniphest, projects, differential
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D7120
Summary: When loading the cursor repository, we need to load the most recent
commit too if we're paging by commit date. This fixes a fatal for installs
with more than 100 repositories.
Auditors: btrahan
Summary: Ref T603. Allows permitted users to set view and edit policies for repositories. So far the repository list, repository detail, repository edit, and browse interfaces respect these settings. Most other interfaces will respect stricter settings, but "Public" won't work. Lots of rough edges in the integration still. None of this makes policies any looser than they were already without explicit user intervention, so I just put a warning about it in the UI.
Test Plan: Set a repository to public and browsed it. Verified I could not access non-public repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, davidressman
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7061
Summary:
Ref T603. See inlines for an explanation. The case where I hit this was loading the "Pending Differential Revisions" panel in Diffusion when logged out, after making a repository public.
What happens is that we load 10 revisions (say, D1 .. D10) but the user can't see any of them. We then try to load the next 10, but since the pagination is ordered by date modified, we need to base the next query on the modified date of the last thing we loaded (D10). However, since we use the viewer's policies to load that cursor object, it fails to load, and then we just issue the same query over and over again, loading D1 .. D10 until we run out of execution time.
Test Plan: Interface now loads correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7059
Summary:
- Add some TODO'd keys.
- Add policy fields.
Test Plan: Viewed repositories; created a new repository and verified it got the right default policy settings.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7056
Summary: Allows the user to query for repos by VCS type.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7038
Summary: Fixes T3840. Depends on D7021. See task for discussion. Also improved some config/help stuff.
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3840
Differential Revision: https://secure.phabricator.com/D7022
Summary:
We currently have two giant messes for paging across multiple columns (usually because one column is not unique), and I'm about to add a third for Maniphest.
Provide a more structured way to build these `A > a OR (A = a AND B > b)` clauses.
Test Plan: Set page size to `2` for Differential and Diffusion and paged forward and backward with a bunch of different orders set. Pages worked as expected.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D6971
Summary:
Fixes T3807. Several issues:
- Currently, we split config of type `list<string>` on commas, which makes it impossible to enter a regex with a comma in it.
- Split on newlines only.
- Some of the examples are confusing (provided in JSON instead of the format you actually have to enter them).
- Show examples in the same format you should enter text.
- We didn't validate regexps.
- Introduce `list<regex>` to validate regexes.
@hlau: Note that the old config format for the bugtraq stuff implied the delimiters on the regular expression. They are no longer implied. The examples show the correct format.
Test Plan: Viewed and edited affected config, hitting error and success cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: hlau, aran
Maniphest Tasks: T3807
Differential Revision: https://secure.phabricator.com/D6969
Summary: Ref T603. Killing this class is cool because the classes that replace it are policy-aware. Tried to keep my wits about me as I did this and fixed a few random things along the way. (Ones I remember right now are pulling a query outside of a foreach loop in Releeph and fixing the text in UIExample to note that the ace of hearts if "a powerful" card and not the "most powerful" card (Q of spades gets that honor IMO))
Test Plan: tested the first few changes (execute, executeOne X handle, object) then got real mechanical / careful with the other changes.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran, FacebookPOC
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6941
Summary: Ref T603. Ref D6941.
Test Plan: Clicked around all over - looked good. I plan to re-test D6941 to make sure the executeOne case works now as intended
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6944
Summary: Fixes T2298. Allows repositories to be ordered by name, callsign, commit, or date created. Slightly messy because of cursor paging.
Test Plan: Sorted commits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2298
Differential Revision: https://secure.phabricator.com/D6919
Summary: Adds a status filter and makes the default query "active" repositories.
Test Plan: Used new filter to execute queries.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6918
Summary:
Ref T2625. Switches Diffusion to ApplicationSearch. Notes:
- Rendering is a bit rough, I'll clean that up next.
- Ordering is a bit arbitrary, also coming shortly.
Test Plan: Used `/diffusion/` to execute various searches.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D6917
Summary: Ref T2625. `DiffusionHomeController` currently runs these queries inline. Move them into `DiffusionRepositoryQuery`. Prepareds for ApplicationSearch.
Test Plan: Loaded `/diffusion/`, saw the same content as before.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2625
Differential Revision: https://secure.phabricator.com/D6914
Summary:
Ref T3599
Go through everything, grep a bit, replace some bits.
Test Plan: Navigate around a bit
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T3599
Differential Revision: https://secure.phabricator.com/D6871
Summary:
D6660 accidentally allowed you to build Herald rules for commits that take action "Add to CC", but provided no implementation.
Someone at Facebook then wrote such a rule.
Fix forward since there's no real reason not to allow this.
Test Plan: Used `./scripts/repository/reparse.php --herald rXnnnn` to trigger rules. Observed rule trigger and subsequent subscription.
Reviewers: wez, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6845
Summary: Some more callsites, let me know if you see others, I think think is 98% of them now.
Test Plan: tested each page
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6814
Summary:
This attempts some consistency in form layouts. Notably, they all now contain headers and are 16px off the sides and tops of pages. Also updated dialogs to the same look and feel. I think I got 98% of forms with this pass, but it's likely I missed some buried somewhere.
TODO: will take another pass as consolidating these colors and new gradients in another diff.
Test Plan: Played in my sandbox all week. Please play with it too and let me know how they feel.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, aran
Differential Revision: https://secure.phabricator.com/D6806
Summary:
We can get this out of PHIDType reasonably in all cases and simplify implementation here.
None of these translate correctly anyway so they're basically debugging/development strings.
Test Plan: `grep`, browsed some transactions
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6786
Summary:
^\s+(['"])dust\1\s*=>\s*true,?\s*$\n
Test Plan: Looked through the diff.
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6769
Summary: Fixes T2836
Test Plan: make a diff, get it approved, arc land, verify things okay. ask users on T2836 to try.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, aran
Maniphest Tasks: T2836
Differential Revision: https://secure.phabricator.com/D6770
Summary:
We currently check if daemons are running using the filesystem and process list. These checks reach the wrong result for a lot of users because their webservers can't read the filesystem or process list. They also reach the wrong result for daemons running on other machines.
Instead, query the active daemon list to see if daemons are running. This should be significantly more reliable.
(We didn't do this before because the running daemon list mechanism didn't exist when the check was written, and at the time it was more complex than doing a simple filesystem/process list thing.)
Test Plan: Viewed `/repositories/` with and without daemons running, saw appropriate warning or lack of warning.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6722
Summary: Ref T2769. This isn't a real adapter and its methods are increasingly hacky messes. Make "dry run" a first-class concept on the HeraldEngine instead and remove the adapter.
Test Plan: Ran Herald via test console and via CLI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2769
Differential Revision: https://secure.phabricator.com/D6693
Summary: Ref T2769. The `HeraldRule` class has some query logic; move it into `HeraldRuleQuery`. Also some minor cleanup.
Test Plan: Ran test console, created a new revision, used `reparse.php --herald`. Verified rules triggered correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2769
Differential Revision: https://secure.phabricator.com/D6689
Summary: Ref T2769. This cleans up almost every use of the HeraldContentTypeConfig class.
Test Plan: Viewed and edited Herald rules.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2769
Differential Revision: https://secure.phabricator.com/D6662
Summary:
Ref T2769. Get content types out of hard-coded config and into dynamic adapters.
This removes the "MERGE" and "OWNERS" content types, which were vestigal. These needs are likely better addressed through subscriptions/transactions, and are obsolete, and haven't existed for 2+ years and no one has asked for them to be restored.
Test Plan: Mostly a bunch of grep. Viewed rule list, rule edit. Edited a revision.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2769
Differential Revision: https://secure.phabricator.com/D6656
Summary:
Ref T3092.
- Check for a duplicate key error;
- do less single loading and use Query classes;
- use responsive UI elements;
- add crumbs.
Test Plan: Created a new project, and hit error cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3092
Differential Revision: https://secure.phabricator.com/D6629
Summary: also submit casual entry for longest class name award with new query class. Ref T2715
Test Plan: phid.query and saw the right arcanist project
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2715
Differential Revision: https://secure.phabricator.com/D6586
Summary: Ref T2715. Had to start loading status information in the query class. Debated trying to clean up some of the attach / load stuff but decided to just add status under the new paradigm for now.
Test Plan: phid.query also made a status and checked that out. also played in conpherence.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2715
Differential Revision: https://secure.phabricator.com/D6585
Summary: Ref T2569. When repository pulls fail, they don't necessarily list identifying information about which repository failed. Use a proxy exception to list that information.
Test Plan: {F51267}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2569
Differential Revision: https://secure.phabricator.com/D6548
Summary: Ref T2715. Move Projects to the new stuff.
Test Plan: Used `phid.query` to load projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2715
Differential Revision: https://secure.phabricator.com/D6526
Summary: Ref T2716. Ref T2715. Move CMIT to use Application PHIDs. Nothing too special here, but I consolidated some code into DiffusionCommitQuery. Depends on D6514.
Test Plan: Browsed Diffusion. Browsed Differential/Maniphest with linked commits. Used jump nav; used `phid.lookup` and `phid.query`. Used remarkup for Git and SVN repos. Grepped for PHID_TYPE_CMIT.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2715, T2716
Differential Revision: https://secure.phabricator.com/D6515
Summary:
Ref T1670. Mostly, use PhutilArgumentParser. This breaks up the mismash of functional stuff and PhabriatorDaemonControl into proper argumentparser Workflows.
There are no functional changes, except that I removed the "pingConduit()" call prior to starting daemons, because I intend to remove all Conduit integration.
Test Plan:
- Ran `phd list`.
- Ran `phd status` (running daemons).
- Ran `phd status` (no running daemons).
- Ran `phd stop <pid>` (dead task).
- Ran `phd stop <pid>` (live task).
- Ran `phd stop zebra` (invalid PID).
- Ran `phd stop 1` (bad PID).
- Ran `phd stop`.
- Ran `phd debug zebra` (no match).
- Ran `phd debug e` (ambiguous).
- Ran `phd debug task`.
- Ran `phd launch task`.
- Ran `phd launch 0 task` (invalid arg).
- Ran `phd launch 2 task`.
- Ran `phd help`.
- Ran `phd help list`.
- Ran `phd start`.
- Ran `phd restart`.
- Looked at Repositories (daemon running).
- Looked at Repositories (daemon not running).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1670
Differential Revision: https://secure.phabricator.com/D6490
Summary:
Remove ocurrences of `loadRelations` in workers.
One was simply unnecesary, no subsequent call to `getReviewers` or `getCCPHIDs` was made.
The other was replaced with the nicer `DifferentialRevisionQuery` using `needRelations` and `needReviewerStatus` (for future upgrade).
Test Plan:
Land a revision into a tracked repository and check the parser worker attached the commit correctly.
For the owners worker I just checked it didn't crash into a hundred tiny pieces.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D6467
Summary: Ref T2231. Ref T2232. This form doesn't do anything yet and there are no link sto it, but it lets you enter all the data to create a repository in a relatively simple, straightforward way.
Test Plan:
{F49740}
{F49741}
{F49742}
{F49743}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231, T2232
Differential Revision: https://secure.phabricator.com/D6430
Summary: Ref T603. This query isn't policy-aware yet, but prepare for it to be one day.
Test Plan: Looked at: home page; differential home; differential detail; diffusion browse. Made differential.query conduit call.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D6337
Summary: Ref T3377. MySQL ignores indexes if we hand it mismatched datatypes. This seems colossally dumb, but give it what it expects.
Test Plan: wat
Reviewers: wez, btrahan
Reviewed By: wez
CC: aran
Maniphest Tasks: T3377
Differential Revision: https://secure.phabricator.com/D6201
Summary: Adds support for the "encoding" field to the new transactional interface.
Test Plan:
{F44189}
{F44190}
Some of the encodings in the second screen are from testing, and can no longer be set.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6035
Summary:
At one point this was sort of a one-line summary but it isn't really anymore (and doesn't appear on the list view). We could add a summary in the future if we wanted.
- Change the control from a text area to a remarkup area.
- Change the display to remarkup.
Test Plan:
{F44183}
{F44184}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D6034
Summary:
Ref T2231, T603. Plan of attack here is pretty much:
- Built out a new (currently not linked in the UI) edit interface in Diffusion which is transaction-based and has a sensible layout.
- Build out a new create interface based on PagedForm which dumps into the new edit interface.
- Throw the old stuff away.
- Everyone lives happily ever after.
Test Plan:
{F44163}
{F44164}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D6029
Summary: Fixes T2965, see that task for discussion. This is dumb but seems like our best bet.
Test Plan:
- Installed newish version of Git.
- Set HOME on the websever to `/var/root` (or any other unreadable directory).
- Hit the error described in T2965 when viewing Diffusion.
- Applied this patch.
- Diffusion works.
Reviewers: btrahan, joel
Reviewed By: btrahan
CC: aran, chad
Maniphest Tasks: T2965
Differential Revision: https://secure.phabricator.com/D5994
Summary: Ref T2784. This one was a wee bit complicated. Had to add PhabricatorUser and concept of initFromConduit (or not) to DiffusionRequest.
Test Plan: foreach repo, visited CALLSIGN and clicked a commit and verified they laoded correctly. Hacked code to hit NOT via Conduit and repeated tests to great success.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5928
Summary:
Ref T2784. Begins pulling discovery into Engines and covering it with tests. In particular:
- Discovery is currently a one-shot process where we find all the new commits and write them to the database in one go. Split it apart so we find and return the new commits first, then write them to the database separately. This makes things simpler and more testable.
- This diff only brings SVN into an engine (and only the "find the commits" part), since it's simpler than Git or Mercurial.
- Creates a base Engine class and moves common functionality there.
- Restores the `--verbose` flag to `repository pull`.
Test Plan: Added unit tests. Ran `bin/repository discover`. Ran `bin/phd debug pulllocal`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5906
Summary:
Ref T2784. This moves us toward being able to test the background and Conduit pipelines for repositories. In particular:
- Separate the logic for pulling repositories (`git pull`, `hg pull`) out of `PhabricatorRepositoryPullLocalDaemon` and put it in `PhabricatorRepositoryPullEngine`. This allows repositories to be pulled directly without invoking the daemons.
- Add tests for the engine, including a future-looking base test case.
- Add basic `PhutilDirectoryFixture`-based repositories.
Next steps:
# Do the same for repo discovery.
# Then we can start writing tests against specific Conduit methods.
Test Plan: Ran unit tests. Ran `bin/repository pull` on SVN, Hg and Git repositories. Ran `bin/phd debug pulllocal`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, nh
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5904
Summary: see title. Ref T2784.
Test Plan:
In diffusion, for each of SVN, Mercurial, and Git, I loaded up /diffusion/CALLSIGN/. I verified the README was displayed and things looked good. Next I clicked on "browse" on the top-most commit and verified things looked correct. Also clicked through to a file for a good measure and things looked good.
In owners, for each of SVN, Mercurial, and Git, I played around with the path typeahead / validator. It worked correctly!
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5883
Summary:
This creates a common form look and feel across the site. I spent a bit of time working out a number of kinks in our various renderings. Some things:
- Font Styles are correctly applied for form elements now.
- Everything lines up!
- Selects are larger, easier to read, interact.
- Inputs have been squared.
- Consistant CSS applied glow (try it!)
- Improved Mobile Responsiveness
- CSS applied to all form elements, not just Aphront
- Many other minor tweaks.
I tried to hit as many high profile forms as possible in an effort to increase consistency. Stopped for now and will follow up after this lands. I know Evan is not a super fan of the glow, but after working with it for a week, it's way cleaner and responsive than the OS controls. Give it a try.
Test Plan: Tested many applications, forms, mobile and tablet.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5860
Summary: ref T2784. This one had a few fun spots where I had to move data around. Also, is there some common object (or should I add it?) that can do this toDictionary newFromConduit stuff? Also, this assumes D5803 is largely correct at the time of this diff.
Test Plan: browsed mercurial and git repository page. saw the branches i expected.
Reviewers: epriestley
Reviewed By: epriestley
CC: chad, aran, Korvin
Maniphest Tasks: T2784
Differential Revision: https://secure.phabricator.com/D5810
Summary: Fixes T2971.
Test Plan:
/rG1.
Set regexp to one line and URL, then /rG1.
Set regexp to two lines, then /rG1.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2971
Differential Revision: https://secure.phabricator.com/D5676
Summary: If there is a change in SVN root (perhaps properties change) then we try to list its parent (which doesn't exist) and mark the root itself as deleted.
Test Plan: Parsed SVN commit with property change of root.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5709
Summary: Migration doesn't delete differential.revisionPHID but maybe it should?
Test Plan: Reparsed commit, ran the migration, deleted differential.revisionPHID, looked at task with attached commit with attached revision.
Reviewers: epriestley, edward
Reviewed By: epriestley
CC: aran, Korvin, AnhNhan
Differential Revision: https://secure.phabricator.com/D5634
Summary: Fixes T2698. When applications are installed, their Conduit calls should drop out. This will also let us land Releeph without exposing Conduit calls.
Test Plan:
- Viewed Conduit console; uninstalled some applications and verified their calls dropped out.
- Tried to make an uninstalled call; got an appropriate error.
Reviewers: edward, btrahan
Reviewed By: edward
CC: aran
Maniphest Tasks: T2698
Differential Revision: https://secure.phabricator.com/D5302
Test Plan:
Enable the checkbox under the Tracking options for a repository.
View the repository in Diffusion, the username should show.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2575
Differential Revision: https://secure.phabricator.com/D5269
Summary: It's dumb to execute a query which we know will return an empty result.
Test Plan: Looked at comment preview with "11", didn't see "1 = 0" in DarkConsole.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D5177
Summary:
Unmuck almost all of the we-sort-of-have-viewers-some-of-the-time mess.
There are a few notable cases here:
- I used Omnipotent users when indexing objects for search. I think this is correct; we do policy filtering when showing results.
- I cheated in a bad way in the Remarkup object rule, but fixing this requires fixing all the PhabricatorRemarkupEngine callsites (there are 85). I'll do that in the next diff.
- I cheated in a few random places, like when sending mail about package edits. These aren't a big deal.
Test Plan:
- Grepped for all PhabricatorObjectHandleData references.
- Gave them viewers.
Reviewers: vrana
Reviewed By: vrana
CC: aran, edward
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D5151
Summary: Do this in a reasonably proper / formal way. Leave a TODO for the policy stuff.
Test Plan: Ran `scripts/repository/reparse.php --herald rPnnnnn`
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D5150
Summary:
Move Diffusion to be hovercard-ready, and expand our ability to resolve commit references.
- Link unqualified hashes of 7 characters or more which match a commit.
- Link qualified hashes of 5 characters or more which match a commit.
- Support `{...}` syntax.
Test Plan: {F33896}
Reviewers: chad, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D5121
Summary:
Fixes T2563. Instead of rendering "rPnnnnnn", render "rPnnnnnn: add feature X". Tweak Audit tables to accommodate.
@vrana / @nh, this migration might take a while. You could safely skip it when deploying and then run it after deployment.
I think I fixed all the other places where these render, but might have missed something.
Test Plan:
- Ran first schema migration, clicked around to make sure nothing broke.
- Ran `scripts/repository/reparse.php --message rXyyyyy`, verified summary populated.
- Ran second migration.
- Checked task/diffusion/audit/differential for weird rendering.
Reviewers: vrana
Reviewed By: vrana
CC: nh, aran, chrisbolt, allixsenos
Maniphest Tasks: T2563
Differential Revision: https://secure.phabricator.com/D5012
Summary: Mostly applies a new call spacing rule; also a few things that have slipped through via pull requests and such
Test Plan: `find src/ -type f -name '*.php' | xargs -n16 arc lint --output summary --apply-patches`
Reviewers: chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D5002
Summary:
Lots of killed `phutil_escape_html()`.
Done by searching for `AphrontTableView` and then `$rows` (usually) backwards.
Test Plan:
Looked at homepage.
echo id(new AphrontTableView(array(array('<'))))->render();
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4884
Summary: Searched for `AphrontFormView` and then for `appendChild()`.
Test Plan: /login/
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4855
Summary: Done by searching for `AphrontErrorView` and then `appendChild()`.
Test Plan:
Looked at Commit Detail.
Looked at Revision Detail.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4843
Summary:
I wasn't able to reproduce the "recursion detected" in real web request but I saw lots of 1073741824 refcounts in `debug_zval_dump()` of $object.
I'm not sure how that happens.
Test Plan: D4807#4
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4839
Summary:
Convert a final few `render_tag()` calls to `tag()` calls. This leaves us with 36 calls:
- 9 are in Conpherence, and will be converted after merging. Using Views makes the most sense here, to get access to renderHTMLView() and such.
- 2 are the definition and its library map entry.
- 3 are in the documentation.
- I believe the remaining 22 are too difficult to convert pre-merge. About half are in code which is slated for destruction; the other half are in the base implementations of very common classes (like PhabricatorStandardPageView) and can only be converted by converting the entire codebase.
My plan at this point is:
- Test the branch thoroughly.
- Merge to master.
- Over time, resolve the remaining issues: lint means things shouldn't get any worse.
Test Plan: See inlines.
Reviewers: vrana
Reviewed By: vrana
CC: aran, edward
Maniphest Tasks: T2432
Differential Revision: https://secure.phabricator.com/D4802
Summary:
The other `true` is correct (and I think we can fix the scaling issues) but this one should be an indirect change. This prevents the branch from appearing in the history of every file.
(I misread this code and gave @vrana some bad advice originally. This is //actually// consistent with Mercurial and Git.)
Test Plan: Partial revert. I'll make this stuff testable.
Reviewers: nh, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4742
Summary:
- Implements `javelin_tag()`, which is `javelin_render_tag()` on top of `phutil_tag()` instead of `phutil_render_tag()`.
- Manually converts all or almost all of the trivial callsites.
Test Plan:
- Site does not seem any more broken than before.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4639
Summary:
- Grepped for phutil_render_tag().
- Fixed some easy ones.
Test Plan:
- Browsed around; site didn't seem more broken than it was before.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D4638
Summary:
Created with spatch:
lang=diff
- phutil_render_tag
+ phutil_tag
(X, Y, '...')
Then searched for `&` and `<` in the output and replaced them.
Test Plan: Loaded homepage.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4503
Summary: We currently try to delete symbols by ID, but the table has a multipart primary key and no `id` column.
Test Plan: Ran query locally; had @JThramer verify fix in his environment.
Reviewers: btrahan
Reviewed By: btrahan
CC: JThramer, aran
Differential Revision: https://secure.phabricator.com/D4626
Summary: Ref T2298. This seems like the least complicated reasonable order to implement.
Test Plan: Looked at repositories, saw them ordered by name.
Reviewers: vrana, btrahan, brennantaylor
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2298
Differential Revision: https://secure.phabricator.com/D4395
Summary: Simple change to stop exceptions from being thrown based on the diff in D4146.
Test Plan: arc call-conduit repository.create
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: vrana, aran, Korvin
Maniphest Tasks: T2268
Differential Revision: https://secure.phabricator.com/D4342
Test Plan: HHVM currently core dumps so I didn't test it.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4343
Summary:
The search indexing API has several problems right now:
- Always runs in-process.
- It would be nice to push this into the task queue for performance. However, the API currently passses an object all the way through (and some indexers depend on preloaded object attributes), so it can't be dumped into the task queue at any stage since we can't serialize it.
- Being able to use the task queue will also make rebuilding indexes faster.
- Instead, make the API phid-oriented.
- No uniform indexing API.
- Each "Editor" currently calls SomeCustomIndexer::indexThing(). This won't work with AbstractTransactions. The API is also just weird.
- Instead, provide a uniform API.
- No uniform CLI.
- We have `scripts/search/reindex_everything.php`, but it doesn't actually index everything. Each new document type needs to be separately added to it, leading to stuff like D3839. Third-party applications can't provide indexers.
- Instead, let indexers expose documents for indexing.
- Not application-oriented.
- All the indexers live in search/ right now, which isn't the right organization in an application-orietned view of the world.
- Instead, move indexers to applications and load them with SymbolLoader.
Test Plan:
- `bin/search index`
- Indexed one revision, one task.
- Indexed `--type TASK`, `--type DREV`, etc., for all types.
- Indexed `--all`.
- Added the word "saboteur" to a revision, task, wiki page, and question and then searched for it.
- Creating users is a pain; searched for a user after indexing.
- Creating commits is a pain; searched for a commit after indexing.
- Mocks aren't currently loadable in the result view, so their indexing is moot.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: 20after4, aran
Maniphest Tasks: T1991, T2104
Differential Revision: https://secure.phabricator.com/D4261
Summary:
Because of the way PhabricatorOwnersPackage works, the code to save package
changes when parsing commit changes was raising a few undefined index errors,
and was throwing an exception trying to call a method on null (because not
all of the phids related to the package had their handles loaded). This fix
doesn't load the missing handles, it just avoids trying to use them.
Test Plan:
./scripts/repository/reparse.php on a commit with path changes that triggered
a package change
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4236
Summary:
Load the data for daemon worker tasks when viewing them, and present
the information in a useful way. This defaults to printing the json data,
but for some classes of worker it will also link to the corresponding
object, to make debugging problems with workers easier.
Test Plan:
load /daemon/task/NNN for a CommitParserWorker and a MetaMTAWorker, and
see the addition of a data field with useful content and link.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4226
Summary:
This adds a configuration option for repositories to be marked as managed
by phabricator, which is then used by the pullLocal daemon to try to recover
from some errors it runs into.
Test Plan: Set a bogus uri for a repo, saw that the pullLocal daemon fixed it.
Reviewers: epriestley, vrana
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3680
Summary: This is to reduce number of calls from Arcanist.
Test Plan: Called it from web interface.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D4146
Summary: we were catching a specific exception; just catch all exceptions
Test Plan: viewed repository tool home page
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2155
Differential Revision: https://secure.phabricator.com/D4118
Summary:
Issues here:
- Need an application-sized "eye", or a "home" icon for "Phabricator Home".
- Some of the "apps_lb_2x" sliced images are the "_dark_" versions, not the light versions.
- If you slice an application-sized "logout" (power off) icon and application-sized "help" (questionmark in circle) icon I can replace the current menu icons and nearly get rid of "autosprite".
- To replace the icons on /applications/, the non-retina size is "4x", so we'd need "8x" for retina. Alternatively I can reduce the icon sizes by 50%.
- The "Help", "Settings" and "Logout" items currently have a "glowing" hover state, which needs a variant (or we can drop it).
- The /applications/ icons have a white hover state (or we can drop it).
- The 1x application (14x14) icons aren't used anywhere right now, should they be? Maybe in the feed in the future, etc?
- The "apps-2x" and "apps-large" sheets are the same image, but getting them to actually use the same file is a bit tricky, so I just left them separate for now.
Test Plan:
{F26698}
{F26699}
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4108
Summary:
AphrontSideNavView is an old class which required you to do a lot of work; it was obsoleted by AphrontSideNavFilterView. Remove all direct callsites so I can clean it up.
This is a precursor to letting me render a filter menu as a dropdown menu for T1960.
Test Plan:
Examined each interface for correct filter construction and selection:
- Browsed Diffusion
- Browsed Differential
- Browsed Files
- Browsed Slowvote
- Browsed Phriction
- Browsed repo edit interface
Grepped for `AphrontSideNavView`. The only remaining instances are in `AphrontSideNavView` itself and `AphrontSideNavFilterView` (which currently uses it).
Reviewers: chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T1960
Differential Revision: https://secure.phabricator.com/D4034
Summary: See D3977, a terrible diff where I made a huge messs.
Test Plan: Ran `reparse.php --message --trace <revision>`, verified correct identification of author.
Reviewers: edward, vrana
Reviewed By: edward
CC: aran
Differential Revision: https://secure.phabricator.com/D4104
Summary: See discussion in T1544. This has been obsoleted by simpler/better mechanisms.
Test Plan: Edited a repository; ran a parse task.
Reviewers: edward
Reviewed By: edward
CC: aran
Maniphest Tasks: T1544
Differential Revision: https://secure.phabricator.com/D3977
Summary: This saves lint errors to the path change of current commit. It requires pushed revision. It doesn't save difference from previous commit mentioned in T2038#comment-4 - I don't plan doing it after all, everything would be much more complicated and the amount of data saved with this approach isn't that bad.
Test Plan: Applied patch, ran script, verified DB.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2038
Differential Revision: https://secure.phabricator.com/D3899
Summary:
This commit doesn't change license of any file. It just makes the license implicit (inherited from LICENSE file in the root directory).
We are removing the headers for these reasons:
- It wastes space in editors, less code is visible in editor upon opening a file.
- It brings noise to diff of the first change of any file every year.
- It confuses Git file copy detection when creating small files.
- We don't have an explicit license header in other files (JS, CSS, images, documentation).
- Using license header in every file is not obligatory: http://www.apache.org/dev/apply-license.html#new.
This change is approved by Alma Chao (Lead Open Source and IP Counsel at Facebook).
Test Plan: Verified that the license survived only in LICENSE file and that it didn't modify externals.
Reviewers: epriestley, davidrecordon
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T2035
Differential Revision: https://secure.phabricator.com/D3886
Summary:
Currently, when taskmasters complete a task it is immediately deleted. This prevents us from doing some general things, like:
- Supporting the idea of permanent failure (e.g., after N failures just stop trying).
- Showing the user how fast taskmasters are completing tasks.
- Showing the user how long tasks took to complete.
Having better visibility into this is important to Drydock, which builds on the task system. Also, generally buff debug output for task execution.
Test Plan: Ran `bin/phd debug taskmaster`. Ran `bin/phd debug garbage`. Queued some tasks via various systems.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D3852
Summary: we do this by passing the "seenOnBranches" commit data detail through the stack
Test Plan: browse in diffusion link worked for non-master checkins under git
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1949
Differential Revision: https://secure.phabricator.com/D3853
Summary: fancy title. really just make the delete() method aware of related objects and build a quick workflow which calls delete(). also make commit delete savvy about audit requests.
Test Plan: deleted a repository per the instructions given to me in the web UI
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T1416, T1958, T1372
Differential Revision: https://secure.phabricator.com/D3822
Summary: When we receive an email, figure out if any of the other tos and ccs are users. If they are, pass their phids through the stach as "exclude phids" and exclude them from getting the email.
Test Plan: used the various applications (audit, differential, maniphest) and noted emails were sent as expected.
Reviewers: epriestley, vrana
Reviewed By: vrana
CC: aran, Korvin, vrana
Maniphest Tasks: T1676
Differential Revision: https://secure.phabricator.com/D3645
Summary: For immutable objects, just use the ID as a cursor.
Test Plan:
- Analyzed commits from an empty cursor.
- Checked that cursor was good.
- Pulled some more commits.
- Analyzed commits again, verified it only hit the new ones.
- Verified the graph of "Count of CMIT" looked reasonable.
Reviewers: vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1866
Differential Revision: https://secure.phabricator.com/D3656
Summary:
D03646 works, I don't want it to work.
Theoretically, it can cause us some troubles if we use this string in JS number context where 030 is 24.
Test Plan: D03646, D3646
Reviewers: epriestley, edward
Reviewed By: edward
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3646
Summary: tricky part is purging symbols at that time too. override "delete" method to get there, use transactions, etc.
Test Plan: deleted an arcanist project - it worked!
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, mbishopim3
Maniphest Tasks: T1738
Differential Revision: https://secure.phabricator.com/D3613
Summary:
D3555 stopped multiple commenting but it still attaches multiple diffs.
Save earlier to stop doing unnecessary work.
Test Plan: Reparsed the same commit twice at the same time.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3598
Summary: So they're maybe a little easier to deal with? I'm going to take this formally to "plz @chad plz help" land.
Test Plan: {F20329}
Reviewers: btrahan, vrana, chad
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3609
Summary:
Replace executing 'ps aux' with usage of available api to
control daemons PhabricatorDaemonControl.
This fixes isPullDaemonRunningOnThisMachine returning wrong status
under Fedora & lighttpd & SELinux because SELinux with default
settings blocked getting all processes in 'ps aux'.
Test Plan: start stop daemon and check repository app
Reviewers: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3557
Summary:
If attaching a commit or checking if there are any changes takes nonzero time then the revision may be closed by someone else.
Cleaner solution would be to do it inside a transaction and mark the SELECT as FOR UPDATE but it would be blocking.
Test Plan: Patched `$should_close` to be true, reparsed an already closed commit.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3555
Test Plan: Created diff, opened the file from Differential, opened the file in Diffusion.
Reviewers: btrahan, epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3538
Summary:
In the commit message parser worker, it tries to get relationships for a
revision without first loading them. (D3444 introduced the change.) This
is where the get happens, so I'm adding the load here - maybe it should be
added in the CommitMessageParserWorker instead?
Test Plan: Made this change, and my taskmaster daemons stopped failing.
Reviewers: epriestley, vrana
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3448
Summary:
This is mostly ripped from D2721, but doesn't implement the T945 part.
After we parse a commit message, give DifferentialFieldSpecifications an opportunity to react to the message as well (e.g., by updating related objects).
Test Plan: Impelmented a var_dump() body, ran `reparse.php` on a commit.
Reviewers: vrana, 20after4, btrahan, edward
Reviewed By: 20after4
CC: aran
Maniphest Tasks: T945, T1544
Differential Revision: https://secure.phabricator.com/D3444
Summary: If the commit has a known author but that author is different from the revision author or the revision doesn't exist, we'll throw away the commit author and then raise an audit for "Owners Not Involved". Instead, we should just use the commit author in all cases.
Test Plan:
Debugged this with Zor in IRC, he reported it fixed his issue.
Before:
http://pastie.org/4574680
("Author" is empty.)
After:
http://pastie.org/4574712
("Author" is correctly recognized.)
Reviewers: jungejason, nh, vrana, btrahan
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D3374
Summary:
Adds a flexible navigation menu to diffs that shows you your current position in the diff.
Anticipating some "this is the best thing ever" and some "this is the wosrt thing ever" on this, but let's see how much pushback we get? It seems pretty good to me.
Test Plan: Will attach screenshots.
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1633, T1591
Differential Revision: https://secure.phabricator.com/D3355
Summary: We should probably do this also in `differential.creatediff` but it's not a big deal because we later call `differential.updaterevision` which does this using `DifferentialRevisionEditor`.
Test Plan: None.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3263
Summary: See D3252.
Test Plan: This one is nasty to test, I'm going to make some coffee first.
Reviewers: davidreuss, vrana, btrahan
Reviewed By: davidreuss
CC: aran
Maniphest Tasks: T452
Differential Revision: https://secure.phabricator.com/D3254
Summary:
I ran into a case where a commit isn't "new" but hasn't been closed. I
think the check on the status of the differential revision should be
enough and this check isn't needed.
Test Plan:
used the reparse.php script to close a revision that previously wouldn't
close.
Reviewers: epriestley, vrana
Reviewed By: vrana
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3232
Summary:
See T1602.
This is just the minimal functional patch; the scripts will continue
working because of the `DEFAULT ''`.
Test Plan:
Can't fully test this until I get more code working, but
nothing broke horribly yet.
Reviewers: epriestley
Reviewed By: epriestley
CC: nh, aran, Korvin
Maniphest Tasks: T1602
Differential Revision: https://secure.phabricator.com/D3147
Summary: If a change copies some file `A` to `B` and also edits `A`, we currently record this as an indirect change and don't show the edits to `A` in the diff. Instead, record these as direct changes.
Test Plan: Created two commits, one which copied `A` to `B` without modifying `A` and one which copied `A` to `B` and modified A. Viewed both commits in Diffusion. The unmodified commit did not show `A`, and the modified commit did (with the correct changes).
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: champo, aran
Differential Revision: https://secure.phabricator.com/D3120
Summary:
We have some false positives on commit changes checker.
I'm not sure if the reason is a difference between `git diff` and `svn diff` or something else but making this more robust doesn't harm anything.
We couldn't make the files from the whole changeset because I want to ignore context bigger than `$num_lines` to reduce rebase noise.
Test Plan:
Ran the method on diff which had false positive previously.
Ran the method on a diff with real change.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D3107
After this commit: d9296638cd
I started getting this error:
Unhandled Exception ("Exception")
Bad getter call: getURIObject
It turns out that getURIObject just needed to be getRemoteURIObject and then the problem goes away.
Summary:
In D3063, we stopped converting "user@domain:path" git-style URIs, but this broke the SSH-detection code and I missed that in my test plan because my test case uses natural SSH keys so the omission of SSH flags didn't cause failures.
This code is a bit of a mess anyway. Consolidate and refactor it to be a bit simpler, and add test coverage.
Test Plan: Ran unit tests. Ran "test_connection.php" in SSH and non-SSH modes, verified SSH modes generated appropriate ssh-agent commands around the git remote commands.
Reviewers: vrana, btrahan, tberman
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1529
Differential Revision: https://secure.phabricator.com/D3093
Summary:
Currently, we have this cumbersome `PhabricatorRepositoryCommitMessageDetailParser` hook. This is really old and outdated; I want to just use the Differential custom field parser. See T945 for a specific application.
However, it allows installs to override author/committer association. Instead, provide an event hook for doing this.
Test Plan: Added a listener, made every commit resolve to "turtle", parsed some commits, verified the events looked sane and they now correctly were all attributed to "turtle".
Reviewers: btrahan, vrana, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1337
Differential Revision: https://secure.phabricator.com/D3040
Summary: We currently omit email from Git author/committer lookups, which gives us some bad results when identify commit authors. Include email. Also simplify this block a little bit.
Test Plan: Ran "reparse.php --message" on several commits, verified that the author/committer seemed reasonable with var_dump()s.
Reviewers: btrahan, vrana, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1337
Differential Revision: https://secure.phabricator.com/D3039
Summary:
See D3033, T1529. We currently transform "scp-style" `user@host:path` URIs into normal `ssh://user@host/path` URIs. This is undesirable for two reasons:
- The paths aren't always equivalent. They are for GitHub, which is why I missed this originally, but in the general case the ":path" is resolved relatively and the "/path" is resolved absolutely. So this transformation can break things.
- It confuses users, who do not think of "git@host:path" URIs as SSH URIs even though the SSH protocol is implied.
So stop using them, and just use the "git@host:path" URIs instead. This is a bit messy since we have some validation built up on top of URIs. Hopefully we can get rid of more of this in the future as we simplify repository management.
Test Plan: Unit tests cover this stuff pretty well. Made a new git repository with a "git@host:path" style URI and did pull/discover on it, verified the right URI was used.
Reviewers: btrahan, vrana
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1529
Differential Revision: https://secure.phabricator.com/D3036
Summary: This is a minor quality-of-life improvement to prevent D2968 from being as nasty as it is.
Test Plan: Ran unit tests; generated Differential, Maniphest and Diffusion emails and verified the bodies looked sensible.
Reviewers: btrahan, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T931
Differential Revision: https://secure.phabricator.com/D2986
Summary:
See D818 for an older attempt at this. Support code has matured to the point where the patch is pretty straightforward.
@tido, this was a long-standing request from Aditya back in the day.
Test Plan: Used `reparse.php --herald` to send myself a bunch of emails with various patch configurations. Confirmed that limits are respected, reasonable errors arise when they're violated, etc. (Timeout is a little funky but that's out of scope here, I think.)
Reviewers: btrahan
Reviewed By: btrahan
CC: tido, aran
Maniphest Tasks: T456
Differential Revision: https://secure.phabricator.com/D2967
Summary:
The locks held by read-only pullLocal daemons were causing our discovery instance
to not get the lock and fail at discovery. We don't need to hold the lock while
pulling (only while discovering), so this moves the lock to the appropriate place.
Test Plan: tested in production
Reviewers: jungejason, epriestley, vrana
Reviewed By: jungejason
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2890
Summary:
Even though `--encoding` is passed to the command, git still fails
in some cases to correctly convert the output. Attempt the conversion
ourselves if it's non UTF-8.
Test Plan: Reparsed message in a repository with ISO-8859-1 encoded commit messages.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Maniphest Tasks: T452
Differential Revision: https://secure.phabricator.com/D2888
Summary:
We have a race condition right now, where we may insert a commit without `seenOnBranches`. This means shouldAutocloseCommit will return false (since it's not on any autoclose branches) if the message parser runs fast enough, causing it to associate the commit but not close the revision. This happened for D2851.
Also prompt the user to repair broken repositories.
Test Plan: Ran discovery / repair. Ran discovery on new commits. Verified 'seenOnBranches' value. Deleted some data, verified "repair" error. Repaired repository.
Reviewers: jungejason, nh, vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2858
Summary: Allow multiple daemons to run without contention.
Test Plan: Ran multiple daemons simultaneously in "debug" mode, observed them acquiring (and sometimes failing to acquire) locks.
Reviewers: btrahan, jungejason, nh
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1400
Differential Revision: https://secure.phabricator.com/D2877
Summary:
When the absolute path is used for load file (loadFileContent(()), it fails in git. For example:
/var/repo/page_admin_app
> git cat-file blob '4d6c03923006d6c444660f2c734fe03e10fd20bd':'/ios/PageAdminApp/Resources/splash/De fault-Portrait@2x~ipad.png'
fatal: Not a valid object name 4d6c03923006d6c444660f2c734fe03e10fd20bd:/ios/PageAdminApp/Resources/s plash/Default-Portrait@2x~ipad.png
This is breaking the auto-closing for about 8 revisions like
https://phabricator.fb.com/rPPA4d6c03923006d6c444660f2c734fe03e10fd20bd ...
https://phabricatorcator.fb.com/rPPA51acb7e482aab0c491b530ed19dddc741d50f673 ...
Test Plan:
- reparsed https://phabricator.fb.com/rPPA4d6c03923006d6c444660f2c734fe03e10fd20bd successfully with corresponding differential revision being closed.
- verified that without leading '/', loadFileContent for svn still works. Both of the following commands worked (note the double '/' right before 'tfb':
svn cat svn+ssh://svn.vip.facebook.com/svnroot//tfb/trunk/www/flib/intern/cachearchiver/regenerators/wurfl/CacheArchiveWurflRegenerator.php@579700
svn cat svn+ssh://svn.vip.facebook.com/svnroot/tfb/trunk/www/flib/intern/cachearchiver/regenerators/wurfl/CacheArchiveWurflRegenerator.php@579700
Reviewers: vrana
Reviewed By: vrana
CC: nh, aran, epriestley
Differential Revision: https://secure.phabricator.com/D2847
Summary:
Improve performance of large discovery tasks in Git by using subprocess streaming, like we do for Mercurial.
Basically, we save the cost of running many `git log` commands by running one big `git log` command but only parsing as much of it as we need to. This is pretty complicated, but we more or less need it for mercurial (which has ~100ms of 'hg' overhead instead of ~5ms of 'git' overhead) so we're already committed to most of the complexity costs. The git implementation is much simpler than the hg implementation because we don't need to handle all the weird parent rules (git gives us to them easily).
Test Plan:
Before, `discover --repair` on Phabricator took 35s:
real 0m35.324s
user 0m13.364s
sys 0m21.088s
Now 7s:
real 0m7.236s
user 0m2.436s
sys 0m3.444s
Note that most of the time is spent inserting rows after discover, the actual speedup of the git discovery part is much larger (subjectively, it runs in less than a second now, from ~28 seconds before).
Also ran discover/pull on single new commits in normal cases to verify that nothing broke in the common case.
Reviewers: jungejason, nh, vrana
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1401
Differential Revision: https://secure.phabricator.com/D2851
Summary:
If a repository is missing commits because they mysteriously vanished, there's no reasonable way to get them back right now. Provide a way to ignore the state in the database and rediscover the entire repository unconditionally.
We don't queue any reparses or anything, but when I move reparse into this script we can hook things up or something. This generally shouldn't be too important anyway.
Test Plan: Ran `repository discover --repair` on Phabricator.
Reviewers: jungejason, nh, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2850
Summary:
Nothing new or exciting here yet, just moving the random scripts/repositories/ things to bin/repository. Also add `repository list`.
(Console stuff comes from D2841.)
Test Plan: Ran `repository list`, `repository pull`, `repository discover`, `repository discover --verbose`, `repository help`.
Reviewers: jungejason, vrana
Reviewed By: vrana
CC: aran
Differential Revision: https://secure.phabricator.com/D2849
Summary: Add verbose logging. This logging is activated by setting "phd.verbose" in the config, running "phd debug", or explicitly in scripts/repository/pull.php and scripst/repository/discover.php
Test Plan:
>>> orbital ~/devtools/phabricator $ ./scripts/repository/discover.php GTEST
Discovering 'GTEST'...
<VERB> PhabricatorRepositoryPullLocalDaemon Discovering commits in repository 'GTEST'...
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch '()_+abcd$100', at a37bc285a12efa7224fe19f3df54cd90fa2b897a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch '+abcd$100', at a37bc285a12efa7224fe19f3df54cd90fa2b897a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch '_+abcd$100', at a37bc285a12efa7224fe19f3df54cd90fa2b897a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch 'abcd$100', at a37bc285a12efa7224fe19f3df54cd90fa2b897a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch 'arcpatch', at 774c7737b2d560a291697126bf4513204ccf661a.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch 'arcpatch-1', at dc97539bee07293f95990d71f4638335a2531d69.
<VERB> PhabricatorRepositoryPullLocalDaemon Skipping, HEAD is known.
<VERB> PhabricatorRepositoryPullLocalDaemon Examining branch 'arcpatch-2', at 1acfaec313c46dd3caa90448800181fb91b0270f.
Reviewers: jungejason
Reviewed By: jungejason
CC: aran
Differential Revision: https://secure.phabricator.com/D2843
Summary: in svn and hg (for now), no branch used.
Test Plan: will test live
Reviewers: epriestley
CC: nh, vrana, aran, Korvin
Differential Revision: https://secure.phabricator.com/D2839
Summary: it's calling pull daemon's failure. This is actually Nick's fix.
Test Plan: Nick already manually ran it on daemon machine.
Reviewers: vrana, nh
Reviewed By: vrana
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D2828
Summary:
The autoclose logic is currently doing a little too much work. We want to parse each commit at most twice:
# When it first appears in the repository.
# When it first appears on an autoclose branch.
These two events might not be distinct (i.e., it might first appear on an autoclose branch).
Currently, to discover commits initially appearing on autoclose branches, we check each branch, determine if it's an autoclose branch or not, and determine if the HEAD is already a known commit on an autoclose branch. This is correct so far, and allows us to ignore branches which either haven't changed or have commits at HEAD which we've already examined.
However, if an autoclose branch has a new commit, we start working backward through it. Prior to this patch, we only stop when we hit commits that we've already discovered lie on this branch. If the branch is new, none of the commits will be discovered on it (they're discovered in general, and likely discovered on other autoclose branches, but not discovered on this branch), so we'll parse all the way back to the root.
Instead, we want to stop when we hit commits that we've already discovered on //any// autoclose branch.
So do that.
Test Plan: Pushed a new branch, then pushed a new commit at HEAD. Ran discovery, verified we rediscovered only 1 commit, not every commit in history.
Reviewers: vrana, jungejason, aurelijus
Reviewed By: vrana
CC: aran
Maniphest Tasks: T1389
Differential Revision: https://secure.phabricator.com/D2798
Summary: This has been a point of some confusion, make the messages more explicit.
Test Plan:
Added var_dump() stuff and ran on some commits:
$ ./scripts/repository/reparse.php --message rP9fc54f4dfb61f7338cb1cfe819bc72d2a3404264
Running 'PhabricatorRepositoryGitCommitMessageParserWorker'...
string(58) "Closed by commit rP9fc54f4dfb61 (authored by @epriestley)."
$ ./scripts/repository/reparse.php --message rP444c634b6c6612fc7b36ddffab8023ef67372ab9
Running 'PhabricatorRepositoryGitCommitMessageParserWorker'...
string(83) "Closed by commit rP444c634b6c66 (authored by Ben Rogers, committed by @epriestley)."
$ ./scripts/repository/reparse.php --message rP22d12fe499e3ecb62392397f2ac2a91768c974aa
Running 'PhabricatorRepositoryGitCommitMessageParserWorker'...
string(52) "Closed by commit rP22d12fe499e3 (authored by vrana)."
$ ./scripts/repository/reparse.php --message rPe51958159483cd0acf00adcff51edf8717b4a23b
Running 'PhabricatorRepositoryGitCommitMessageParserWorker'...
string(85) "Closed by commit rPe51958159483 (authored by David Fisher, committed by @epriestley)."
Reviewers: csilvers, vrana
Reviewed By: csilvers
CC: aran
Differential Revision: https://secure.phabricator.com/D2765
Summary: Implemented it how it was suggested in ticket comments
Test Plan: create a revision in a branch, push that branch up, verify it's visible in diffusion and also that revision is not closed, then merge and push to master, verify that revision closed
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin, 20after4
Maniphest Tasks: T1210
Differential Revision: https://secure.phabricator.com/D2706
Summary:
Some e-mail clients display this header and it needs to be constant.
This is somehow involved but I doubt that there is a simpler solution.
Test Plan:
Applied SQL patch.
Commented on revision, commented on commit, changed package.
Verified that the `Thread-Topic` has constant and human readable value.
Reviewers: epriestley
Reviewed By: epriestley
CC: ola, aran, Korvin
Differential Revision: https://secure.phabricator.com/D2745
Summary:
It seems that Outlook and Mail.app mostly ignores the threading headers and thread primarily by subject.
They are also very picky about the Re: part in the header.
I guess that's because users of these clients often hit Reply when they want to create a new message to the sender of an e-mail.
We need both of these applications to work with the same setting because we don't use multiplexing to prevent sending multiple e-mails to people in lists.
I also believe that the default behavior should just work in most setups.
I've tried several different combinations of putting "Re:" and none of them seems to always work in both clients.
This diff at least adds more abstraction to the code which should prevent copy/paste errors (two fixed by this diff!).
Test Plan: Sent several e-mails with varying subject, verified that they look as before in Outlook and Mail.app.
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2709
Summary: D2703#13 is confusing - it looks like that @allenjohnashton took the action but it was @epriestley.
Test Plan: I don't have a repro so I tested this block standalone.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Korvin
Differential Revision: https://secure.phabricator.com/D2707
Summary: If, e.g., $PATH is broken we may not be able to run "ps". We'll explode pretty hard, currently. Instead, just show a harsher warning.
Test Plan: Changed "ps auxwww" to "psq", which doesn't exist on my system. Loaded page, got warning instead of explosion.
Reviewers: nathanws, vrana, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D2624
Summary:
- `kill_init.php` said "Moving 1000 files" - I hope that this is not some limit in `FileFinder`.
- [src/infrastructure/celerity] `git mv utils.php map.php; git mv api/utils.php api.php`
- Comment `phutil_libraries` in `.arcconfig` and run `arc liberate`.
NOTE: `arc diff` timed out so I'm pushing it without review.
Test Plan:
/D1234
Browsed around, especially in `applications/repository/worker/commitchangeparser` and `applications/` in general.
Auditors: epriestley
Maniphest Tasks: T1103
Summary:
This adds a link to [Closed] e-mail if it detects some changes.
It compares added and removed lines with 3 lines context.
The subtle form of informing is permissive to false negatives and positives.
I have an e-mail filter for [Closed] e-mails so I wouldn't personally notice this change - we should probably promote this feature a little bit.
Test Plan:
Reparse a diff with a change after last update.
Reparse a diff without a change after last update.
Reviewers: jungejason, epriestley
Reviewed By: jungejason
CC: aran, Koolvin, btrahan
Maniphest Tasks: T201
Differential Revision: https://secure.phabricator.com/D2540
Summary: also makes the UI more general for this username + password business.
Test Plan:
- configure a phabricator repository from the svn server @asherwin provided which is configured for svn protocol with SASL
- observed phabricator failing without my patch
- upgraded my SVN client to support SASL (protip for mac users - http://www.wandisco.com/subversion/download#osx)
- applied patch to phabricator
- restarted daemons
- noted daemon success - diffusion populating nicely
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Maniphest Tasks: T1260
Differential Revision: https://secure.phabricator.com/D2549
Summary:
Git and hg (supposedly..) differentiate between an author (who wrote the patch)
and a committer (who applied the patch).
This patch allows Phabricator to note when a patch is committed
by someone other than the Author.
Test Plan:
Created 2 accounts,
- U (Account with a PHID)
- U' (Account without a PHID)
and had them create and commit commits
testing if their username/real name would be displayed correctly in Diffusion,
- BrowserTable
- HistoryTable
- Code revision
Teztz,
A(uthor)/C(ommitter)
If it's A/A then Author committed
UL = User link (<a href="/p/username">username</a>)
UN = User name ("Firstname Lastname")
Tezt | Expected in table | Got
-------------------------------------------
A/A | UL/UL | UL/UL
A'/C | UN/UL | UN/UL
A/C' | UL/UN | UL/UN
A'/C' | UN/UN | UN/UN
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Maniphest Tasks: T688
Differential Revision: https://secure.phabricator.com/D2541
Summary:
This attaches commit diff to its associated revision as any other diff.
The consequence is that the revision page now shows the actual commit instead of the last diff. It may be disturbing but it is desired.
Another consequence is that lint and unit results are displayed as skipped after the revision was committed. I want to fix it somehow.
My next plan is to automatically diff against the last normal diff and include the link to this diff in commit e-mail if non-empty.
Test Plan:
reparse.php
Diff against last normal diff.
Reviewers: epriestley, jungejason
Reviewed By: jungejason
CC: aran, Koolvin, jungejason
Maniphest Tasks: T201
Differential Revision: https://secure.phabricator.com/D2530
Summary:
we were parsing the git log output slightly incorrectly and over-exploding on spaces. we also needed to escape the path %20 stuff`.
Not sure if there's something fancy to do given folks should reparse their repos if they are impacted by this issue.
Test Plan:
made a directory with spaces and some dummy revisions. observed diffs wouldn't load and links broken.
with patch, ran scripts/reparse.php for pertinent revisions and diffs loaded and links weren't broken.
Reviewers: floatinglomas, epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Maniphest Tasks: T1252
Differential Revision: https://secure.phabricator.com/D2510
Summary: If you have an empty value saved in the "default branch" field, we default to empty string (or null, or whatever) instead of the correct default.
Test Plan:
- Looked at a Git repo with an empty default branch, got a default to "master" instead of an error.
- Looked at a Mercurial repo with an empty default branch, got a default to "default" instead of an error.
Reviewers: btrahan, csilvers
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1237
Differential Revision: https://secure.phabricator.com/D2512
Summary:
D2457 and D2459 made some changes here. This little guy just needed to be touched so it could be arc lint'd to have the proper updated include paths
Sorry to spam reviewers; Evan is in Diablo 3 somewhere. :D
Test Plan: no more fatal on test everything implemented (arc unit src/infrastructure/__tests__/)
Reviewers: epriestley, jungejason, nh, csilvers
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2474
Summary: Prelminary, I want to test this a bit more when I'm better rested. Provide a "bulk" import mode for Mercurial so we can do initial discovery more quickly.
Test Plan: Imported the Mercurial repository in 2m45s, blocked on MySQL I/O rather than Mercurial I/O.
Reviewers: csilvers, btrahan
Reviewed By: csilvers
CC: aran
Differential Revision: https://secure.phabricator.com/D2457
Summary: For git workflows where developers push personal feature branches to the origin, this is a quick workaround until T1210 is implemented properly. I'll also mention this in D2446.
Test Plan:
- Committed a revision in an "autoclose" repository; it was autoclosed. Committed a revision in a no-autoclose repository, it was not autoclosed.
- Edited repositories, saving the "autoclose" setting as enabled/disabled.
Reviewers: aurelijus, btrahan
Reviewed By: aurelijus
CC: aran
Maniphest Tasks: T1210
Differential Revision: https://secure.phabricator.com/D2448
Summary:
- When you have an un-cloned repository, we currently throw random-looking Git/Hg exception. Instead, throw a useful error.
- When you have a cloned but undiscovered repository, we show no commits. This is crazy confusing. Instead, show commits as "importing...".
- Fix some warnings and errors for empty path table cases, etc.
Test Plan:
- Wiped database.
- Added Mercurial repo without running daemons. Viewed in Diffusion, got a good exception.
- Pulled Mercurial repo without discovering it. Got "Importing...".
- Discovered Mercurial repo without parsing it. Got "Importing..." plus date information.
- Parsed Mercurial repo, got everything working properly.
- Added Git repo without running daemons, did all the stuff above, same results.
- This doesn't improve SVN much but that's a trickier case since we don't actually make SVN calls and rely only on the parse state.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T776
Differential Revision: https://secure.phabricator.com/D2439
Summary:
- Merge CommitTask daemon into PullLocal daemon. This is another artifact of past instability (and order-dependent parsers). We still publish to the timeline, although this was the last consumer. Long term we'll probably delete timeline and move to webhooks, since everyone who has asked about this stuff has been eager to trade away the durability and ordering of the timeline for the ease of use of webhooks. There's also no reason to timeline this anymore since parsing is no longer order-dependent.
- Add `phd start` to start all the daemons you need. Add `phd restart` to restart all the daemons you need. So cool~
- Simplify and improve phd and Diffusion daemon documentation.
Test Plan:
- Ran `phd start`.
- Ran `phd restart`.
- Generated/read documentation.
- Imported some stuff, got clean parses.
Reviewers: btrahan, csilvers
Reviewed By: csilvers
CC: aran, jungejason, nh
Differential Revision: https://secure.phabricator.com/D2433
Summary:
See D2418. This merges the commit discovery daemon into the same single daemon, and applies all the same rules to it.
There are relatively few implementation changes, but a few things did change:
- I simplified/improved Mercurial importing, by finding full branch tip hashes with "--debug branches" and using "parents --template {node}" so we don't need to do separate "--debug id" calls.
- Added a new "--not" flag to exclude repositories, since I switched to real arg parsing anyway.
- I removed a web UI notification that you need to restart the daemons, this is no longer true.
- I added a web UI notification that no pull daemon is running on the machine.
NOTE: @makinde, this doesn't change anything from your perspective, but it something breaks this is the likely cause.
This implicitly resolves T792, because discovery no longer runs before pulling.
Test Plan:
- Swapped databases to a fresh install.
- Ran "pulllocal" in debug mode. Verified it correctly does nothing (fixed a minor issue with min() on empty array).
- Added an SVN repository. Verified it cloned and discovered correctly.
- Added a Mercurial repository. Verified it cloned and discovered correctly.
- Added a Git repository. Verified it cloned and discovered correctly.
- Ran with arguments to verify behaviors: "--not MTEST --not STEST", "P --no-discovery", "P".
Reviewers: btrahan, csilvers, Makinde
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T792
Differential Revision: https://secure.phabricator.com/D2430
Summary:
Allow the pull daemon to take a list of repositories. By default, pull all repositories.
Make some effort to respect pull frequencies, although we'll necessarily suffer a bit if running with only one process.
NOTE: We still launch one discovery daemon per working copy, so this only cuts the daemon count in half.
Test Plan:
- Ran `phd debug pulllocal`, verified behavior.
- Ran `pull.php P MTEST SVNTEST --trace`, verified it pulled the repos and ran the right commands.
- Ran `phd repository-launch-master`, verified the right daemons launched, checked daemon console.
- Ran `phd repository-launch-readonly`, verified the right daemon launched, checked daemon console.
Reviewers: btrahan, csilvers, davidreuss
Reviewed By: csilvers
CC: aran
Differential Revision: https://secure.phabricator.com/D2418
Summary:
- Move email to a separate table.
- Migrate existing email to new storage.
- Allow users to add and remove email addresses.
- Allow users to verify email addresses.
- Allow users to change their primary email address.
- Convert all the registration/reset/login code to understand these changes.
- There are a few security considerations here but I think I've addressed them. Principally, it is important to never let a user acquire a verified email address they don't actually own. We ensure this by tightening the scoping of token generation rules to be (user, email) specific.
- This should have essentially zero impact on Facebook, but may require some minor changes in the registration code -- I don't exactly remember how it is set up.
Not included here (next steps):
- Allow configuration to restrict email to certain domains.
- Allow configuration to require validated email.
Test Plan:
This is a fairly extensive, difficult-to-test change.
- From "Email Addresses" interface:
- Added new email (verified email verifications sent).
- Changed primary email (verified old/new notificactions sent).
- Resent verification emails (verified they sent).
- Removed email.
- Tried to add already-owned email.
- Created new users with "accountadmin". Edited existing users with "accountadmin".
- Created new users with "add_user.php".
- Created new users with web interface.
- Clicked welcome email link, verified it verified email.
- Reset password.
- Linked/unlinked oauth accounts.
- Logged in with oauth account.
- Logged in with email.
- Registered with Oauth account.
- Tried to register with OAuth account with duplicate email.
- Verified errors for email verification with bad tokens, etc.
Reviewers: btrahan, vrana, jungejason
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1184
Differential Revision: https://secure.phabricator.com/D2393
Summary: Primarily for @csilvers who has 92 million repositories or something. This is a touch hacky, but movitated by pragmatism.
Test Plan:
- Ran "repository.create" to create repositories, "repository.query" to list them.
- Tested most or maybe all of the error conditions, probably.
Reviewers: btrahan, vrana, csilvers
Reviewed By: csilvers
CC: aran
Differential Revision: https://secure.phabricator.com/D2396
Summary:
This is somewhat controversial but push date is usually more useful than commit date (which can be for example a month before other people can see the commit).
We can also store both dates.
Test Plan:
git log --pretty="%ct %at"
Reviewers: epriestley
Reviewed By: epriestley
CC: nh, aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2319
Summary: "Committed" is SVN-specific language, and confusing in Git and Mercurial. Use neutral language instead.
Test Plan: Inspection.
Reviewers: btrahan, Makinde, vrana, jungejason
Reviewed By: vrana
CC: aran
Maniphest Tasks: T909
Differential Revision: https://secure.phabricator.com/D2087
Summary:
This is slightly more complicated for this reason:
- We don't set `dateCommitted` for normal commits, only for markcommitted.
-- We need to add this date to old revisions now.
Test Plan:
Reparse a revision - commit date was set.
Conduit `markcommitted` - commit date was set.
Run SQL script.
Display closed revision.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, Koolvin
Differential Revision: https://secure.phabricator.com/D2282
Summary: Lists the 25 most recent tags on the "Repository" page.
Test Plan: Looked at a git repository with a tag, saw it. Looked at HG/SVN repos, they didn't break.
Reviewers: davidreuss, 20after4, btrahan, vrana, jungejason
Reviewed By: davidreuss
CC: aran
Maniphest Tasks: T1130
Differential Revision: https://secure.phabricator.com/D2255
Summary:
This continues work started at D2215.
Files moved from deleted directory were marked as Copied Here instead of Moved Here.
Test Plan: Reparsed two commits which was previously wrong, now correct.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Maniphest Tasks: T1114
Differential Revision: https://secure.phabricator.com/D2229
Summary: This is not perfect. Moved files are reported as deleted but I'm happy with it.
Test Plan: Reparsed two commits which was previously wrong, now semi-correct.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Maniphest Tasks: T1114
Differential Revision: https://secure.phabricator.com/D2215
Summary:
- Add an explicit multiplexing option, and enable it by default. This is necessary for Mail.app to coexist with other clients ("Re:" breaks outlook at the very least, and generally sucks in the common case), and allows users with flexible clients to enable subject variance.
- Add an option for subject line variance. Default to not varying the subject, so mail no longer says [Committed], [Closed], etc. This is so the defaults thread correctly in Gmail (not entirely sure this actually works).
- Add a preference to enable subject line variance.
- Unless all mail is multiplexed, don't enable or respect the "Re" or "vary subject" preferences. These are currently shown and respected in non-multiplex cases, which creates inconsistent results.
NOTE: @jungejason @nh @vrana This changes the default behavior (from non-multiplexing to multiplexing), and might break Facebook's integration. You should be able to keep the same behavior by setting the options appropriately, although if you can get the new defaults working they're probably better.
Test Plan:
Send mail from Maniphest, Differential and Audit. Updated preferences. Enabled/disabled multiplexing. Things seem OK?
NOTE: I haven't actually been able to repro the Gmail threading issue so I'm not totally sure what's going on there, maybe it started respecting "Re:" (or always has), but @cpiro and @20after4 both reported it independently. This fixes a bunch of bugs in any case and gives us more conservative set of defaults.
I'll see if I can buff out the Gmail story a bit but every client is basically a giant black box of mystery. :/
Reviewers: btrahan, vrana, jungejason, nh
Reviewed By: btrahan
CC: cpiro, 20after4, aran
Maniphest Tasks: T1097, T847
Differential Revision: https://secure.phabricator.com/D2206
Summary:
PHP arrays have an internal "current position" marker. (I think because foreach() wasn't introduced until PHP 4 and there was no way to get rid of it by then?)
A few functions affect the position of the marker, like reset(), end(), each(), next(), and prev(). A few functions read the position of the marker, like each(), next(), prev(), current() and key().
For the most part, no one uses any of this because foreach() is vastly easier and more natural. However, we sometimes want to select the first or last key from an array. Since key() returns the key //at the current position//, and you can't guarantee that no one will introduce some next() calls somewhere, the right way to do this is reset() + key(). This is cumbesome, so we introduced head_key() and last_key() (like head() and last()) in D2161.
Switch all the reset()/end() + key() (or omitted reset() since I was feeling like taking risks + key()) calls to head_key() or last_key().
Test Plan: Verified most of these by visiting the affected pages.
Reviewers: btrahan, vrana, jungejason, Koolvin
Reviewed By: jungejason
CC: aran
Differential Revision: https://secure.phabricator.com/D2169
Summary:
The audit tools has many false positive about Author Not
Matching with Revision. The fix is to set the authorPHID which was
missing in the existing code
Test Plan:
run reparse.php and it doesn't generate false positive result
anymore.
Reviewers: nh, epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D2119
Summary:
- The UI is pretty straightforward, since Handle just works (tm)
- Added two methods to the owners object to handle the new layer of
indirection. Then ran git grep PhabricatorOwnersOwner and changed
callsites as appropriate.
Sending this to get a round of feedback before I test the non-trivial
changes in this diff.
Test Plan:
- owners tool: edit, view, list for basic functionality.
- phlog for the two new methods I added
Reviewers: epriestley, blair, jungejason
CC: aran
Differential Revision: https://secure.phabricator.com/D2079
Summary: NOTE: This is not produced by a script so there might be errors. Please review carefully.
Test Plan: Browse around.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran
Differential Revision: https://secure.phabricator.com/D2091
Summary:
- Show the canonical (i.e., shorter) commit identifier in the subject.
- For commits without a revision, put the commit summary in the subject.
Test Plan: Ran "scripts/repository/reparse.php <commit> --herald" for a number of different commits (with revision, without revision); got more useful email subjects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T1028
Differential Revision: https://secure.phabricator.com/D2004
Summary: Apparently I spent like a good month copy/pasting slightly different versions of this logic all over the codebase.
Test Plan: Selected "View Options -> Browse in Diffusion" for a chagneset, got a URI with a branch name in it under Git.
Reviewers: vrana, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1993
Summary:
Currently, we use "git log" to detect the change list for all commits, but this produces no output for merge commits.
Instead, parse them as changes against the first parent (the merge destination). This produces generally sensible/expected behavior, and is consistent with what GitHub does.
We need to special-case the first commit because it doesn't have parents.
NOTE: This is a parser change so you need to run `./scripts/repository/reparse.php --all <callsign> --change` to reparse merge commits in already-imported repositories after updating.
Test Plan: Reparsed a merge commit, a non-merge commit, and the first commit in the Phabricator repository.
Reviewers: btrahan, gschmidt
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T961
Differential Revision: https://secure.phabricator.com/D1985
Summary: We need to build a request in order to pick up an appropriate default branch name, instead of using the raw static generator.
Test Plan: Clicked a symbol link, got /master/path/blahblah
Reviewers: vrana, btrahan
Reviewed By: vrana
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1982
Summary:
Diffusion request/uri handling is currently a big, hastily ported mess. In particular, it has:
- Tons and tons of duplicated code.
- Bugs with handling unusual branch and file names.
- An excessively large (and yet insufficiently expressive) API on DiffusionRequest, including a nonsensical concrete base class.
- Other tools were doing hacky things like passing ":" branch names.
This diff attempts to fix these issues.
- Make the base class abstract (it was concrete ONLY for "/diffusion/").
- Move all URI generation to DiffusionRequest. Make the core static. Add unit tests.
- Delete the 300 copies of URI generation code throughout Diffusion.
- Move all URI parsing to DiffusionRequest. Make the core static. Add unit tests.
- Add an appropriate static initializer for other callers.
- Convert all code calling `newFromAphrontRequestDictionary` outside of Diffusion to the new `newFromDictionary` API.
- Refactor static initializers to be sensibly-sized.
- Refactor derived DiffusionRequest classes to remove duplicated code.
- Properly encode branch names (fixes branches with "/", see <https://github.com/facebook/phabricator/issues/100>).
- Properly encode path names (fixes issues in D1742).
- Properly escape delimiter characters ";" and "$" in path names so files like "$100" are not interpreted as "line 100".
- Fix a couple warnings.
- Fix a couple lint issues.
- Fix a bug where we would not parse filenames with spaces in them correctly in the Git browse query.
- Fix a bug where Git change queries would fail unnecessarily.
- Provide or improve some documentation.
This thing is pretty gigantic but also kind of hard to split up. If it's unreasonably difficult to review, let me know and I can take a stab at it though.
This supplants D1742.
Test Plan:
- Used home, repository, branch, browse, change, history, diff (ajax), lastmodified (ajax) views of Diffusion.
- Used Owners typeaheads and search.
- Used diffusion.getrecentcommitsbypath method.
- Pushed a change to an absurdly-named file on an absurdly-named branch, everything worked properly.
{F9185}
Reviewers: nh, vrana, btrahan
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1921
Summary:
See <https://github.com/facebook/phabricator/issues/102>. Between Feb 1 and Mar 1, the hg released changed the exit code behavior of "hg pull". This broke us mildly (and a bunch of other applications more severely, which is why it was reverted).
Detect the common case of this (english) and don't fail.
Test Plan: @killermonk, can you try applying this? I'll try to do an upgrade to 2.1 and see if I can also do a proper test.
Reviewers: Makinde, btrahan, killermonk
Reviewed By: btrahan
CC: killermonk, aran, epriestley
Differential Revision: https://secure.phabricator.com/D1948
Summary:
T937 suggests 'inset' could have its own view controller.
It has the following methods:
- setTitle for title
- setRightbutton if you have to place something (preferably a button)
on the right side of the form
- setDescription if you want to describe what it does
- setContent for the main content
- addDivAttributes REALLY not sure about this one but it had to be included
because of a single controller (see owners/controller/edit/PhabricatorOwnersEditController.php:238)
- appendChild works as usual if your form is complex but you still want to remove
->appendChild('<div class..') ->appendChild('</div>');
It might be an overkill so maybe some could be dropped:
- addDivAttributes() and just rewrite how PhabricatorOwnersEditController.php works
- setContent() and use appendChild for the main content?
Test Plan:
- Looked at the controllers in phabricator
- Changed the controller
- Opened the page in another tab
- If something didnd't look the same I fixed it.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1926
Summary: Last of the big final patches. Left a few debatable classes (12 out of about 400) that I'll deal with individually eventually.
Test Plan: Ran testEverythingImplemented.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T795
Differential Revision: https://secure.phabricator.com/D1881
Summary:
svn 1.7 changed their xml format slightly, they now have a
##<?xml version="1.0" encoding="UTF-8"?>## tag instead of
##<?xml version="1.0"?>##. This relaxes matching this tag.
Test Plan: ./scripts/repository/reparse.php rE521979 --change
Reviewers: epriestley, jungejason
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1866
Summary: We've hit a couple of these in the wild, raise better error messages when the local repo is toast / broken / nonsense.
Test Plan: Broke my local repo in all of the different ways we test for, verified I got an error message in each case.
Reviewers: btrahan, abirchall
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T964, T924
Differential Revision: https://secure.phabricator.com/D1855
Summary:
These are all unambiguously unextensible. Issues I hit:
- Maniphest Change/Diff controllers, just consolidated them.
- Some search controllers incorrectly extend from "Search" but should extend from "SearchBase". This has no runtime effects.
- D1836 introduced a closure, which we don't handle correctly (somewhat on purpose; we target PHP 5.2). See T962.
Test Plan: Ran "testEverythingImplemented" unit test to identify classes extending from `final` classes. Resolved issues.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T795
Differential Revision: https://secure.phabricator.com/D1843
Summary:
I'm on a host where I have the PhabricatorRepositoryPullLocalDaemons
tracking a remote repo. In my case, these end up as local git repos in
/var/repo/$name.
I'm working on another daemon that is going to automatically make
changes and commit them back upstream. I figured it would be best to do
this in a new local repo. I'll put these in /var/repo-clones/$name.
It's nice to use the exec*() functions in PhabricatorRepository, so the
approach I thought of was to load the PhabricatorRepository object from
the database, then change its localPath to point at the
/var/repo-clones/$name directory instead.
I didn't really want to change the local-path detail with setDetail(),
as that risks committing the change upstream. It's nice to use the
repo's execLocalCommand() methods though, hence wanting to change the
local path.
Test Plan: None yet.
Reviewers: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1821
Summary: We'll keep deleted branches around right now because Git's behavior is not to remove them without --prune.
Test Plan: Ran "git fetch --all --prune" to make sure it at least ostensibly works.
Reviewers: btrahan, 20after4
Reviewed By: 20after4
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1833
Summary: We currently parse these as directory changes and discard them. Instead, parse them as a new "SUBMODULE" type of change.
Test Plan:
- Reparsed a commit which changes submodules and verified it parses correctly.
- Reparsed a commit which adds submodules and verified it parses correctly.
Reviewers: btrahan, kdeggelman
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1815
Summary:
- Enforce proper workflow rules.
- Fix a derp-bug with patches.
Test Plan:
- Tried to mark a revision I didn't own.
- Tried to mark a revision already marked committed.
- Tried to mark a revision otherwise not accepted.
- Verified daemon can override workflow rules and mark from arbitrary states.
Reviewers: btrahan, Makinde
Reviewed By: Makinde
CC: aran, epriestley
Maniphest Tasks: T948
Differential Revision: https://secure.phabricator.com/D1809
Summary:
Adds an optional "Auditors" field (like "Reviewers") to commit messages which gives installs a zero-config method for making audit requests.
This field does not appear on templates unless set, and is mostly ignored (but validated and preserved) by Differential.
It is then parsed by the daemons if present, and audit requests are pushed to valid users.
Test Plan: Made an "Auditors" commit and verified it was retained with "arc amend --show". Pushed it and verified the audit was triggered.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904, T880
Differential Revision: https://secure.phabricator.com/D1793
Summary:
- Move table to Repository, since we have no Owners joins in the application anymore but would like to do a Repository join.
- Rename "packagePHID" to "auditorPHID", since this column may contain package, project, or user PHIDs.
Test Plan:
- Browsed Owners, Audit, and Differential interfaces to the Audit tool.
- Made comments and state changes.
- Ran "reparse.php --herald --owners" on several commits.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley, nh, vrana
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1787
Summary:
- Users may elect to receive an initial notification about a commit; allow it to be replied to in order to interact with the object.
- Share thread headers between emails.
- Add the "REPLY HANDLER ACTIONS" section to both emails.
Test Plan:
- Used "reparse.php --herald" to trigger herald emails, verified reply-to and email body.
- Made audit comments, verified body.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1762
Summary:
- Add a proper mailKey field to make these things mailable. Backfill all
existing objects.
- Denormalize authorPHID to the commit object so we can query by it
efficiently in a future diff. We currently use the search engine to drive
"commits by author" but that's not so good for audit, which needs more
constraints.
- Add an overall audit status field so we can efficiently query "commits that
needs your attention".
- Add enough code to convince myself that these fields are basically
reasonable and work correctly.
Test Plan:
- Ran schema upgrades. Checked database state afterward.
- Ran "reparse.php --owners --herald" to verify worker changes.
- Looked at a commit, altered aggregate status via audits / reparse.php,
verified it responded correctly.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley, nh
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1706
Summary: See D1707 -- just in case the Phabricator server is configured
suspiciously.
Test Plan: Cursory inspection.
Reviewers: Makinde, btrahan
Reviewed By: Makinde
CC: aran, epriestley
Maniphest Tasks: T922
Differential Revision: https://secure.phabricator.com/D1708
Summary:
When users submit an audit, send email to relevant parties informing them.
Allow email to be replied to. Just basic support so far; no "!raise" stuff and
no threading with the Herald commit notification.
Test Plan: Made comments, got email. Replied to email, got comments.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1698
Summary: Add audit information to the commit search index.
Test Plan: Updated a commit, searched for terms in its comments, got hits.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1696
Summary:
Allows you to write a commit rule that triggers an audit by a user (personal
rules) or a project (global rules).
Mostly this is trying to make auditing more lightweight and accessible in
environments where setting up Owners packages doesn't make sense.
For instance, Disqus wants a rule like "trigger an audit for everything that
didn't have a Differential revision". While not necessarily scalable, this is a
perfectly reasonable rule for a small company, but a lot of work to implement
with Owners (and you'll get a lot of collateral damage if you don't make every
committer a project owner).
Instead, they can create a project called 'Unreviewed Commits' and write a rule
like:
- When: Differential revision does not exist
- Action: Trigger an Audit for project: "Unreviewed Commits"
Then whoever cares can join that project and they'll see those audits in their
queue, and when they approve/raise on commits their actions will affect the
project audit.
Similarly, if I want to look at all commits that match some other rule (say,
XSS) but only want to do it like once a month, I can just set up an audit rule
and go through the queue when I feel like it.
NOTE: This abuses the 'packagePHID' field to also store user and project PHIDs.
Through the magic of handles, this (apparently) works fine for now; I'll do a
big schema patch soon but have several other edits I want to make at the same
time.
Also:
- Adds an "active" fiew for /audit/, eventually this will be like the
Differential "active" view (stuff that is relevant to you right now).
- On commits, highlight triggered audits you are responsible for.
Test Plan: Added personal and global audit triggers to Herald, reparsed some
commits with --herald, got audits. Browsed all audit interfaces to make sure
nothing exploded. Viewed a commit where I was responsible for only some audits.
Performed audits and made sure the triggers I am supposed to be responsible for
updated properly.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley
Maniphest Tasks: T904
Differential Revision: https://secure.phabricator.com/D1690
Summary:
@rguerin ran into an issue in his install where Phabricator appears to have
discovered commits which no longer exist, and thus is failing to proceed with
its repository import.
It's not clear how we got into this state. Previously, it was possible by, e.g.,
parsing a different repository's working copy and then switching them back, but
there are now safeguards against that.
I'm taking a three-pronged approach to try to sort this out:
- Provide a script to get out of this state (this script) and reconcile
Phabricator's view of a repository with an authoritative copy of it. This
basically "un-discovers" any discovered commits which don't actually exist (any
queued tasks to parse them will fail permanently when they fail to load the
commit object).
- Add more logging to the discovery daemon so we can figure out where commits
came from.
- Improve Diffusion's UI when stuff is partially discovered (T776).
(This script should also clean up some nonsense on secure.phabricator.com from a
botched Diviner import.)
Test Plan: Ran "reconcile.php" with bogus commits and bogus differential/commit
links, had them expunged. Will work with @rguerin to see if this resolves
things.
Reviewers: btrahan, rguerin
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1552
Summary:
Fix two issues in PhabricatorRepositoryCommitOwnersWorker:
- if a commit was reviewed by some owner of the package, it should not be
marked as needing audit
- do not run herald worker when it is not needed (for example, when the
worker is executed from reparse.php)
Test Plan:
reparse a commit which is reviewed by the owner of a package
and verify that it is not marked as needing audit, and herald is not
executed.
Reviewers: nh, epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1496
Summary:
- Only write the <ruleID, phid> row if the rule is a one-time rule.
- Delete all the rows for rules which aren't one-time.
NOTE: This is probably like several million rows for Facebook and could take a
while.
Test Plan:
Added some one-time and every-time rules, ran them against objects, verified
only relevant rows were inserted.
Ran upgrade script against a database with one-time and every-time "ruleapplied"
rows, got the irrelevant rows removed.
Reviewers: nh, btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1484
Summary:
Herald rules may be marked as "one-time". We track this by writing a row with
<ruleID, phid> when we apply a rule.
However, the current test for rule application involves loading every <ruleID,
*> pair. We also always write this row even for rules which are not one-time, so
if there are 100 rules, we'll load 1,000,000 rows after processing 10,000
objects.
Instead, load only the <phid, *> pairs, which are guaranteed to be bounded to at
most the number of rules.
I'll follow up with a diff that causes us to write rows only for one-time rules,
and deletes all historic rows which are not associated with one-time rules.
Test Plan:
Grepped for callsites to loadAllByContentTypeWithFullData(). Ran
rules in test console.
Reviewers: nh, btrahan, jungejason
Reviewed By: nh
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1483
Summary:
- Make some editing operations transaction-oriented, like Maniphest. (This
seems to be a good model, particularly for extensibility.) I'll move the rest of
the editing operations to transactions in future diffs.
- Make transaction-oriented operations publish feed stories.
Test Plan:
- Created a new project.
- Edited an existing project.
- Created a new project via quick create flow from Maniphest.
- Verified feed stories publish correctly.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley
Maniphest Tasks: T681
Differential Revision: https://secure.phabricator.com/D1477
Summary:
enable herald commit rules to have access to auditing info.
Note that the new herald condition I added contains info for the
packages. I thought about using a simpler herald condition like
"Requires audit is true or false" and let it work together with the
existing "Affected package contains any of the package". It doesn't work
because we need the info about the package to decide if the commit
requires audit, but the herald conditions work separately.
Test Plan:
- A commit requiring auditing was detected by a herald rule that checks
the auditing status
- A commit not requiring auditing was not detected by a herald rule
which checks auditing status, but was detected by a rule which doesn't
check the auditing status
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1399
Summary: @s reported an issue with implicit file:// URIs in Git, see P270.
Recognize and handle URIs in this format. For URIs we don't understand, raise an
exception.
Test Plan:
- Added failing tests.
- Fixed code.
- Tests pass.
Reviewers: btrahan, jungejason, s
Reviewed By: s
CC: aran, epriestley, s
Differential Revision: https://secure.phabricator.com/D1362
Phabricator
Summary: ...this breaks without D1328. Used good ole "codemod" to do this
work, with lots of manual edits around 80 chars.
Test Plan: clicked around phabricator tool suite, particular differential, a
bunch
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: https://secure.phabricator.com/D1351
Summary:
Provide an easy way to jump to Diffusion from Differential if we have
the data we need to connect them.
Test Plan: Tested menu in linked and unlinked diffs. Used menu item.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, epriestley, btrahan
Maniphest Tasks: T309
Differential Revision: https://secure.phabricator.com/D1326
Summary: These seem to work relatively reasonably and don't have any known
deal-breaking failures.
Test Plan: shrug~
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Differential Revision: https://secure.phabricator.com/D1324
corresponding ConduitAPI
Summary: reasonable title... also made this new functionality used by the
repository worker for parsing diffs
Test Plan:
- looked at the conduit console and queried for various types of hashes,
including hashes with no match. got correct results.
- identified a reasonable diff from a local git repo. set the revision status
to 2 (ACCEPTED) in the database. augmented the worker parser code to var_dump
and die after finding revision id. ran scripts/repository/reparse.php
--message rX and verified my var_dumps. removed var_dumps and die and ran
reparse.php again with same paramters. verified revision looked good in
diffusion and there were no errors.
- repeated the above reparse.php jonx for a mercurial repo. note svn isn't in
this hash game so that test was particularly exciting no-op'dness i did not
bother with
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, btrahan, epriestley
Differential Revision: https://secure.phabricator.com/D1315
Summary:
Some installs use Git as the backbone of a CI framework or use a Git remote to
share patches. The tracker scripts currently recognize associated revisions as
"Committed" when they appear in any branch, even if that branch is
"alincoln-personal-development_test_hack" or whatever.
To address the broadest need here, allow Git repositories to be configured to
track only certain branches instead of all branches.
This doesn't allow you to import a branch into Diffusion but ignore it in
Differential. Supporting that is somewhat technically complicated because the
parser currently goes like this:
- Look at HEAD of all branches.
- For any commits we haven't seen before, follow them back to something we
have seen (or the root).
- "Discover" everything new.
Since this doesn't track <branch, commit> pairs, we currently don't have enough
information to tell when a commit appears in a branch for the first time, so we
don't have anywhere we can put a test for whether that branch is tracked and do
the Differential hook only if it is.
However, I think this cruder patch satisfies most of the need and is simple and
obvious in its implementation.
See also D1263.
Test Plan:
- Updated a Git repository with various filters: "", "master, remote", "derp",
" ,,, master ,,,,,"
- Edited SVN and Mercurial repositories to verify they didn't get caught in
the crossfire.
- Ran daemon in debug mode on libphutil with filter "derp", got exception
about no tracked branches. Ran with filter "master", got tracking. Ran with no
filter, got tracking.
- Looked at Diffusion with "derp" and "master", saw no branches and "master"
respectively.
- Added unit tests to cover filtering logic.
Reviewers: btrahan, jungejason, nh, fratrik
Reviewed By: fratrik
CC: aran, fratrik, epriestley
Maniphest Tasks: T270
Differential Revision: https://secure.phabricator.com/D1290
Summary:
- We have a few places where we do some kind of ad-hoc comma list tokenizing,
and I'm adding another one in D1290. Add a helper to the request object.
- Add some unit tests.
Test Plan:
- Ran unit tests.
- Used PHID manager, Maniphest custom view, and Repository project editor.
Reviewers: btrahan, fratrik, jungejason
Reviewed By: btrahan
CC: aran, btrahan, epriestley
Differential Revision: https://secure.phabricator.com/D1302
Summary:
See T624. I originally wrote this to require an explicit remote, but this
creates an ugly "origin:" in all the URIs and makes T270 more difficult.
Treat all branch names as implying 'origin/'.
Test Plan:
- Pulled and imported a fresh copy of libphutil without issues.
- Browsed various git repositories.
- Browsed Javelin's various branches.
- Ran upgrade script, got a bunch of clean 'origin/master' -> 'master'
conversions.
- Tried to specify an explicit remote in a default branch name.
- Unit tests.
Reviewers: nh, jungejason, btrahan
Reviewed By: btrahan
CC: aran, btrahan
Maniphest Tasks: T624
Differential Revision: https://secure.phabricator.com/D1269
Summary: Allow paths to match even if they differ by trailing slashes and
".git".
Test Plan: Ran unit tests.
Reviewers: jungejason, btrahan
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T710
Differential Revision: https://secure.phabricator.com/D1286
Summary:
- These never actually did anything.
- I don't even really remember why I built them, maybe the Open Source team
was pushing for more GitHub integration or something? I really have no idea.
- Anyway, repository tailers do everything these could do (and much more).
Test Plan:
- Ran tailers off GitHub for many months without needing post-receive hooks.
- Grepped for relevant strings, couldn't find any references.
- Used "Repository" edit interface for a Git repository.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T706
Differential Revision: https://secure.phabricator.com/D1273
Summary:
Git accepts either "git@x:/path" or "ssh://git@x.com/path" URIs to mean the
exact same thing, which is causing some false positives and confusion,
particularly because we sometimes mutate URIs.
Since this is just a sanity check, we don't really care about the username,
domain or credentials -- matching the paths is good enough. We're just trying to
make it hard to shoot yourself in the foot by copy-pasting the same local path
into two repositories and forgetting to change one, like I did. :P
Relax the check to only verify the paths are the same.
Test Plan:
- Ran unit tests, which should fully cover things.
- Ran commit discovery daemon in debug mode on incorrectly and correctly
configured repositories.
Reviewers: ajtrichards, jungejason, btrahan
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T710
Differential Revision: https://secure.phabricator.com/D1279
- Use the computed remote URI (which may have an explicit 'ssh://' under Git in some cases).
- Use '$id' correctly rather than casting the URI to an int in the message parser.
Summary: I want to add a command like "where is ArcanistUnitTestEngine" to
phabot. I also want to add a symbol typeahead to Diffusion and generally finish
up that feature since it's useful but only half-implemented. Consolidate the
query logic and expose the data over Conduit.
Test Plan: Used /symbol/ and Conduit to lookup symbols.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T315
Differential Revision: https://secure.phabricator.com/D1260
Summary:
- Previously, used IDs like "33" to match a commit to a Differential revision.
This has a namespacing problem because we now have an arbitrarily large number
of Phabricator installs in the world, and they may want to track commits from
other installs.
- In Differential, parse raw IDs or full URIs. Emit only full URIs.
- In Repositories, parse only full URIs.
- This might cause a few commits to not be picked up in rare circumstances.
Users can fix them with "arc mark-committed". This should be exceedingly rare
because of hash matching.
- There are some caveats for reparsing older repositories, see comments
inline. I don't think there's much broad impact here.
Test Plan:
- Created a new revision, got a full URI.
- Updated revision, worked correctly.
- Ran unit tests.
- Monkeyed with "Differential Revision" field.
- Reviewers: btrahan, jungejason
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, epriestley, jungejason
Maniphest Tasks: T54, T692
Differential Revision: 1250
Summary:
Although I couldn't repro the issue in T692, I did manage to point the "Diviner"
repository at the "Phabricator" working copy and screw some stuff up on
secure.phabricator.com.
Before discovering commits in a repository, ensure the 'origin' remote points at
the configured URI. This prevents issues where the working copy gets configured
to point at an existing (but incorrect) checkout.
Test Plan:
- Ran gitcommitdiscovery daemon normally under "phd debug", saw it execute the
"remote show -n" command and then start working.
- Intentionally botched the config, got an exception:
(Exception) Working copy '/INSECURE/repos/phabricator' has origin URL
'ssh://git@github.com/facebook/phabricator.git', but the configured URL
'git://github.com/facebook/diviner.git' is expected. Refusing to proceed.
Reviewers: btrahan, jungejason
Reviewed By: jungejason
CC: aran, jungejason
Maniphest Tasks: T692
Differential Revision: 1253
Summary:
add basic auditing functionalities. For the related commits for a
package, we detect the following conditions which might be suspicious to the
owners of the package:
* no revision specified
* revision not found
* author not match
* reviewedby not match
* owners not involved
* commit author not recognized
The owners of the package can change the status of the audit entries by
accepting it or specify concern.
The owner can turn on/off the auditing for a package.
Test Plan:
* verified that non-owner cannot see the details of the audit and cannot modify
it
* verified that all the audit reasons can be detected
* tested dropdown filtering and package search
* verified really normal change not detected
* verified accept/concern a commit
* tested enable/disable a package for auditing
* verified one audit applies to all <commit, packages> to the packages the
auditor owns
* verified that re-parsing a commit won't have effect if there exists a
relationship for <commit, package> already
Reviewers: epriestley, nh
Reviewed By: epriestley
CC: aran, benmathews, btrahan, mpodobnik, prithvi, TomL, epriestley
Differential Revision: 1242
Summary: These are "local" commands, but need remote credentials. If the daemon
runs as a user who does not have credentials, the initial clone will work but
subsequent updates will fail.
Test Plan:
- Nuked a local copy of a Git repo.
- Ran "phd debug fetch <phid>" as root (or any other user with no natural SSH
keys). Verified initial clone worked (since it passes credentials to the command
correctly).
- Killed daemon, re-ran, verified "fetch" failed (no credentials passed).
- Applied this patch.
- Re-ran "phd debug fetch <phid>", verified it passed credentials and
succeeded.
- Did all these steps for a Mercurial repo.
Reviewers: btrahan, jungejason
Reviewed By: btrahan
CC: aran, btrahan
Maniphest Tasks: T686
Differential Revision: 1236
Summary:
For each commit, find the affected packages, and provide a way to
search by package.
Test Plan:
create commits that touch and don't touch two packages, and verify
that they display correctly in all the UI pages.
Reviewers: epriestley, blair, nh, tuomaspelkonen
Reviewed By: epriestley
CC: benmathews, aran, epriestley, btrahan, jungejason, mpodobnik, prithvi
Maniphest Tasks: T83
Differential Revision: 1208
Summary:
See D1195, which fataled this daemon.
https://secure.phabricator.com/daemon/log/2966/
Test Plan: Applied this patch to secure.phabricator.com, restarted daemon, it
picked up D1203.
Reviewers: btrahan, jungejason, mareksapota
Reviewed By: btrahan
CC: aran, btrahan, mareksapota
Differential Revision: 1204
Test Plan: Commit as not the author and see what shows up.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley, mareksapota, zeeg
Differential Revision: 1195
Summary: make the change, kill the function. be sure to get a good $user or
$viewer variable
Test Plan:
for each controller or view, look at it in the ui. change timezone, refresh ui
and note change. i did not test the OAuthSettingsPanelController; not sure how
to get to that badboy and i got a bit lazy
Maniphest Tasks: T222
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, btrahan, epriestley
Maniphest Tasks: T222
Differential Revision: 1166
Summary:
0d5b0f21ad added string conversion but MBString always needs an argument for endcoding.
It looks like we can get away with doing this in git instead, with the --encoding='UTF-8' flag. Then we should be safe to remove the test for output type, and stay UTF-8 safe.
Test Plan:
Run updaters with change. Verify commits are updated.
Reviewers: epriestley
CC:
Differential Revision: 1108
Test Plan:
used the reparse.php script for reparsing commit messages and saw the
correct author name (and mapped correctly as a phabricator user) in diffusion.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: 1059
Summary:
This adds an encoding detail to the repository, so we can attempt to
convert hunks previously detected as binary.
We also add the encoding information to the arcanist projectinfo
API so we can pull the information if we have it when uploading changes
via arc.
Test Plan:
Changed encoding through the edit UI, and saw "This is binary file", and
changed it back and saw the correct output from the diff.
Reviewers: epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: 1009
Summary:
Discover commits then return; useful when initializing new repositories
in unit tests.
By which I mean "when initializing a new repository in my unit test that
I'm working on".
Test Plan: Using this in a PhabricatorTestCase.
Reviewers: epriestley, aran
Reviewed By: epriestley
CC: aran, edward, epriestley
Differential Revision: 948
transactional mail
Summary: See T571. SES refuses to deliver mail with this header and there are
various reports of other issues on the internet so I'm defaulting it to off.
Test Plan: Set config to true, tried to send mail, SES rejected it because of
"Precedence: bulk" header.
Reviewers: bmaurer, ola, jungejason, nh, aran
Reviewed By: aran
CC: aran, epriestley, bmaurer
Differential Revision: 1032
Summary:
Clarified the instructions when editing a repository for the remote uri to
mention that a local path for the remote uri must be specified as
file:///local/path/to/repo instead of /local/path/to/repo. (The latter used to
work, but stopped functioning for new repositories as of D888.)
Test Plan:
loaded /repository/edit/NN/tracking (where NN is a repo number), and saw the
updated instruction message.
Reviewers: jungejason, epriestley
Reviewed By: epriestley
CC: aran, epriestley
Differential Revision: 1005
Summary:
This makes symbol cross-references work in Differential. You need to do a little
legwork but I'll document that once the change has baked for a little while.
Basically:
- Projects are annotated with indexed languages, and "shared library" projects
(for example, symbols in Phabricator should be searched for in Arcanist and
libphutil).
- When we render a changeset, we check if its language is an indexed one. If
it is, we invoke the decorator Javascript.
- The Javascript takes you to a lookup page, which either gives you a list of
matching symbols (if several match) or redirects you instantly to the
definition.
Test Plan: Clicked class and function symbols in a diff, got jumped into
sensible sorts of places in Diffusion.
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: 980
Summary: See T507. Since you can't do "xxxxxxxx^" where "xxxxxxxx" is the first
commit in a repository, fall back to diffing against the empty tree if we fail
to diff against the parent commit.
Test Plan: Looked at the first commit in libphutil on my local.
Reviewers: edward, jungejason, nh, tuomaspelkonen, aran
Reviewed By: nh
CC: aran, edward, epriestley, nh
Differential Revision: 953
Summary:
We need to issue all commands as $repository->junk() so we can pick up
credentials. Some of this stuff predates that change landing.
(I removed the "https" vs "svn+ssh" fallback code since it's specific to
Facebook, affected a tiny number of commits, is basically an SVN bug with UTF-8
handling and HTTP support, and doesn't make sense in the general case. The user
has the tools they need to force it via "reparse.php" if it's really an issue.)
Test Plan: Created new authenticated-remote mercurial and git repositories and
pulled/discovered them with credentials.
Reviewers: Makinde, jungejason, nh, tuomaspelkonen, aran
Reviewed By: Makinde
CC: aran, Makinde
Differential Revision: 970
Summary: Change import script plus almost all the view stuff. Still some rough
edges but this seems to mostly work. Blame is currently unsupported but I think
everything else works properly.
Test Plan:
Imported the hg repository itself. It doesn't immediately seem completely
broken. Here are some screens:
https://secure.phabricator.com/file/view/PHID-FILE-1438b71cc7c4a2eb4569/https://secure.phabricator.com/file/view/PHID-FILE-3cec4f72f39e7de2d041/https://secure.phabricator.com/file/view/PHID-FILE-2ea4883f160e8e5098f9/https://secure.phabricator.com/file/view/PHID-FILE-35f751a36ebf65399ade/
All the parsers were able to churn through it without errors.
Ran the new "reparse.php" script in various one-commit and repository modes.
Browsed/imported some git repos for good measure.
NOTE: The hg repository is only 15,000 commits and around 1,000 files.
Performance is okay but hg doesn't provide performant, native APIs to get some
data efficiently so we have to do some dumb stuff. If some of these interfaces
are cripplingly slow or whatever, let me know and we can start bundling some
Mercurial extensions with Arcanist.
Reviewers: Makinde, jungejason, nh, tuomaspelkonen, aran
Reviewed By: Makinde
CC: aran, Makinde, epriestley
Differential Revision: 960
Summary:
When we discover a new commit and it has a known local commit or tree hash, mark
it committed.
This supports Mercurial and Git-Immutable workflows, and improves
hybrid-Git-Mutable workflows and covers some cases where poeple just make
mistakes or whatever.
Test Plan: Parsed Mercurial, Git and SVN commits.
Reviewers: Makinde
Reviewed By: Makinde
CC: aran, Makinde
Differential Revision: 963
Summary: See T502. Under some VCS setups, we get full email addresses instead of
usernames or real names. Try harder to find matches, by falling back to email
address parsing if we don't get hits on the straight-up token parsing.
Test Plan:
This is difficult to test because it depends on the account state and repository
state, and hard to pull out so it's more testable without better mocking
facilities. I just dumped this into the parser to verify the behavior:
foreach (array(
'epriestley',
'Evan Priestley',
'epriestley@epriestley.com',
'derp <epriestley@epriestley.com>',
'"Evan Priestley" <derpderpderp@derpderpderp.com>',
'quackderp <derpderpderp@derpderpderp.com>',
) as $email) {
echo "{$email} = ".$this->resolveUserPHID($email)."\n";
}
die();
Running PhabricatorRepositoryGitCommitMessageParserWorker...
epriestley = PHID-USER-79f25616ea2635089a31
Evan Priestley = PHID-USER-79f25616ea2635089a31
epriestley@epriestley.com = PHID-USER-1bec59b91be6223f07fd
derp <epriestley@epriestley.com> = PHID-USER-1bec59b91be6223f07fd
"Evan Priestley" <derpderpderp@derpderpderp.com> =
PHID-USER-79f25616ea2635089a31
quackderp <derpderpderp@derpderpderp.com> =
This is expected (all variations of my identity parsed correctly, and the bogus
one failed). There are two different user PHIDs in the result set because I have
like 30 different similar accounts on my local, including one called "derp" and
another one with address "derp@derp.com", which prevented an earlier version of
this test case from working correctly.
Reviewers: zachallia, aran, Makinde, jungejason, nh, tuomaspelkonen
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: 968
Summary:
We currently rely on "remote_hooks_enabled" in .arcconfig to determine whether
commands like "arc amend" and "arc merge" should imply "arc mark-committed".
However, this is a historical artifact that is now bad for a bunch of reasons:
- The option name is confusing, it really means 'repository is tracked'.
- The option is hard to discover and generally sucks.
- We can empirically determine the right answer since we now know if a project
is in a tracked repository.
Add a call which arcanist can make on these workflows to figure out if it is
interacting with a project in a tracked repository or not.
Also added an "isTracked()" convenience method to reduce the number of magic
strings all over the place.
Test Plan: Ran "arcanist.projectinfo" for nonexistent, untracked and tracked
projects.
Reviewers: Makinde, jungejason, nh, tuomaspelkonen, aran
Reviewed By: Makinde
CC: aran, epriestley, Makinde
Differential Revision: 945
Summary:
See D943, this is the second parse stage. This will mark Differential revisions
as "Committed" among other things.
Almost all the logic here is shared between VCSes so the implementation itself
is straightforward.
Test Plan: Parsed all messages for the official Mercurial repository.
Reviewers: Makinde, jungejason, nh, tuomaspelkonen, aran
Reviewed By: Makinde
CC: aran, Makinde
Differential Revision: 944
Summary:
Repository import has three major steps:
- Commit discovery (serial)
- Message parsing (parallel, mostly VCS independent)
- Change parsing (parallel, highly VCS dependent)
This implements commit discovery for Mercurial, similar to git's parsing:
- List the heads of all the branches.
- If we haven't already discovered them, follow them back to their roots (or
the first commit we have discovered).
- Import all the newly discovered commits, oldest first.
This is a little complicated but it ensures we discover commits in depth order,
so the discovery process is robust against interruption/failure. If we just
inserted commits as we went, we might read the tip, insert it, and then crash.
When we ran again, we'd think we had already discovered commits older than HEAD.
This also allows later stages to rely on being able to find Phabricator commit
IDs which correspond to parent commits.
NOTE: This importer is fairly slow because "hg" has a large startup time
(compare "hg --version" to "git --version" and "svn --version"; on my machine,
hg has 60ms of overhead for any command) and we need to run many commands (see
the whole "hg id" mess). You can expect something like 10,000 per hour, which
means you may need to run overnight to discover a large repository (IIRC, the
svn/git discovery processes are both about an order of magnitude faster). We
could improve this with batching, but I want to keep it as simple as possible
for now.
Test Plan: Discovered all the commits in the main Mercurial repository,
http://selenic.com/repo/hg.
Reviewers: Makinde, jungejason, nh, tuomaspelkonen, aran
Reviewed By: Makinde
CC: aran, Makinde
Differential Revision: 943
Summary: See T262. This creates the index on the Differential side which we need in order to execute this query efficiently on the Diffusion side.
Also renames "DiffusionGitPathIDQuery" to "DiffusionPathIDQuery", this query object has nothing to do with git.
Test Plan: Attached top-level and sub-level diffs to revisions and verified they populated the table with sensible data.
Reviewers: bmaurer, aravindn, fmoo, jungejason, nh, tuomaspelkonen, aran
CC:
Differential Revision: 931
Summary: No actual parsing/import yet, but now you can define and pull Mercurial
repositories. I merged most of the local pull code so we can share it between
hg/git.
Test Plan:
- Created a new Mercurial repository to track Codeigniter off Bitbucket
- Edited / saved / etc.
- Launched the mercurial pull daemon, it pulled the repo. Killed and
relaunched, it updated the repo.
- Launched the git fetch deamon, it still works correctly.
Reviewers: Makinde, aran, jungejason, tuomaspelkonen
Reviewed By: Makinde
CC: aran, Makinde
Differential Revision: 793
Summary: See T315 for an extensive description of this feature. Adds the
descibed storage table.
Test Plan: Used phpsh to read/write symbol objects.
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: tuomaspelkonen
CC: aran, epriestley, tuomaspelkonen
Differential Revision: 897
Summary: See D902. As @abdul notes, a password input is probably more
appropraite here.
Test Plan: Mashed stuff into it, got bullets instead of text.
Reviewers: abdul, jungejason, nh, tuomaspelkonen, aran
Reviewed By: nh
CC: aran, nh
Differential Revision: 913
- Removed irrelevant csprintf(..)
- Updated code to use $repository->getRemoteURI()
- Updated code to use getRemoteCommandFuture(..) in Diffusion code
- Updated code to use $repository->getRemoteURI()
Summary: I still need to go through all the daemon and Diffusion code and change
the bare execx() calls to $repository->execxXXX() to actually make this work,
but we're getting close.
Test Plan: Configured repositories with various HTTP / SVN setups and ran the
test_connection.php script to verify keys were located and added and
username/password information was supplied.
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: nh
CC: aran, nh, jungejason
Differential Revision: 902
Summary:
Move toward storing credentials in configuration so it's easier to get the
daemons working. This should eventually solve all the key juggling junk you have
to do right now.
This only gets us part of the way to actually using these credentials in the
daemons since I have to go swap everything for $repository->execBlah().
I tried to write a web "Test Connection" button but it was too much of a mess to
get git to work since git doesn't give you access to its SSH command and SSH has
a bunch of interactive prompts which you can't really do anything about without
it or a bunch of ~/.ssh/config editing. This is what Git recommends:
https://git.wiki.kernel.org/index.php/GitFaq#How_do_I_specify_what_ssh_key_git_should_use.3F
..but it's not a great match for this use case.
Test Plan:
- Only partial.
- Ran "test_connection.php" on a Git repo with and without SSH, and with and
without valid credentials. This part works properly.
- Ran "test_connection.php" on a public SVN repo, but I don't have private or
WEBDAV repos set up at the moment.
- Mercurial doesn't work yet.
- Daemons haven't been converted yet.
Reviewers: jungejason, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, abdul, nmalcolm, epriestley, jungejason
Differential Revision: 888
references
Summary:
See T325. We tentatively support doing partial subdirectory parses in
Phabricator for Subversion, so you can elect to import only "trunk/local/" or
similar. We do this by importing only some of the commits (those commits which
affected that directory).
In Subversion, you can also "svn cp
svn+ssh://example.com/svnroot/trunk/foreign/example.c@13 local.c". This means
that commits which reference "trunk/local/" may themselves reference foreign
commits.
Currently, we break in this case and can't find the commit reference. Instead,
generate a foreign commit stub so we can at least point at some reasonable
object.
Test Plan: Successfully imported trunk/a/ of the test repo in T325 without
errors. Verified commit 3 in that repo is imported as a foreign stub.
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, jungejason, epriestley
Differential Revision: 892
repositories
Summary:
This query isn't scoped correctly to the repository ID, so we may identify
commits from other repositories.
This causes a somewhat subtle issue since we only use it to manage file
copies/moves, so you end up with a file "copied from" the same revision in
another repository. I think the UI probably even renders correctly.
Once I finish T325 and better understand what's going on here, I'll see how much
work is involved in writing an SQL patch to fix this.
Test Plan: Parsed the test repo from T325 with the expected error.
Reviewers: jungejason, nh, tuomaspelkonen, aran
Reviewed By: jungejason
CC: aran, jungejason
Differential Revision: 891
Summary: If a user partially discovers a repository and then deletes it, the
timeline will have events from the old repository which this daemon won't be
able to parse.
Test Plan: @ajtrichards, can you apply this locally and restart your daemons
(##phd stop##, then relaunch them) and let me know if it fixes the issue?
Reviewers: ajtrichards, jungejason, tuomaspelkonen, aran
Reviewed By: ajtrichards
CC: aran, epriestley, ajtrichards
Differential Revision: 845
Summary:
See T372. Always render commit messages on one display line, so the table
doesn't jump around as they AJAX in on browse views.
The goal here is to have the cell choose a size naturally and for its content to
render with "overflow: hidden" if the natural size isn't large enough to contain
the content. "white-space: pre" or "white-space: nowrap" would prevent wrapping
but potentially make the table exceed the display width when a better behavior
is to hide some of the commit message.
Also use utf8-aware shortening, now that we have a function for it.
Casting a wide net in case anyone has a better way to do the CSS here. It's kind
of nasty that we have to use so many DOM nodes.
Test Plan:
- Resized window while viewing browse and history views in Safari, Chrome and
Firefox. Table exhibited described behavior.
- Verified summaries render sensibly and are properly truncated to 100
characters.
Reviewed By: aran
Reviewers: aran, jungejason, tuomaspelkonen, tomo, mroch, cpojer
CC: aran, epriestley
Differential Revision: 750
interface
Summary:
See T58. When I originally wrote this interface you couldn't make a form that
looked like a form but wasn't really a form, so I made it a real form. That
meant you could hit "return" in the text input and submit the form, which didn't
do anything but is vaguely silly.
After D422 there's a layout-only form element, so switch to that.
Test Plan: Loaded the tab, hit return in the textarea, it didn't do a form
submit.
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, jungejason, epriestley
Differential Revision: 719
Summary:
See T325. While this is a touch hacky it ends up being fairly clean, and we can
now do initial imports much more quickly and this actually cleaned up some of
the code. I also made the repository edit interface a little less foreboding.
@tuomaspelkonen, did you get anywhere with that bug you were chasing down a
couple days ago? We can hold this if it throws a wrench into stuff you're
working on.
Test Plan:
- Imported a subdirectory of a midsized SVN project (jQuery UI).
- Commit discovery for ~3500/4500 commits took just a few seconds.
- Commit discovery correctly ignored commits which didn't affect this
directory.
- Commit discovery correctly stopped at commit 13.
- Browse interface shows an incomplete listing, but that's fine, and
everything is otherwise functionally correct. We can add a note or something
later ("this is a view of commits affecting a subdirectory, some paths aren't
available"), but this behavior probably won't be too startling to users.
- Edited Git and SVN repositories to test form logic.
Reviewed By: jungejason
Reviewers: tuomaspelkonen, jungejason, aran, Girish
Commenters: tuomaspelkonen
CC: jcleveley, aran, jungejason, tuomaspelkonen
Differential Revision: 696
Summary:
Make it prettier, paginate, add user pictures, show document types, clean some
stuff up a little. Plenty of room for improvement but this should make it a lot
more useful.
Test Plan:
Here's what the new one looks like:
https://secure.phabricator.com/file/view/PHID-FILE-edce2b83c2e3a121c2b7/
Reviewed By: jungejason
Reviewers: tomo, jungejason, aran, tuomaspelkonen, mroch
Commenters: tomo
CC: aran, tomo, jungejason, epriestley
Differential Revision: 545
Summary:
create the indexer for commit
Test Plan:
run the reindex_one_commit.php against one existing commit
and it is returned in search result on the webpage; run parse_one_commit
against another commit; modified reindex_everything.php to let it only
parse one commit after loading all commits.
Reviewed By: epriestley
Reviewers: epriestley, aran
CC: aran, jungejason, epriestley, debow
Differential Revision: 490
Summary:
Everything breaks if this isn't true, and it's easy to get subtly wrong right
now. There are other more magical ways we could do this (automatically add a "/"
in this form or at runtime) but I think making it explicit is the easiest and
most robust approach. See T67.
Test Plan:
Tried to save a URI without a trailing slash.
Reviewed By: jungejason
Reviewers: jungejason, tuomaspelkonen, aran
CC: aran, jungejason
Differential Revision: 305
Summary:
Someone has "defaced" secure.phabricator.com with a helpful suggestion that I
actually do this; fair enough. :P
Test Plan:
Logged in as myself, unable to edit directory information. Logged out, logged in
as admin, was able to edit directory information.
I need to fix some more CSS stuff since some of these tabs render out hideous in
the admin background, but I can followup with that.
Reviewed By: tuomaspelkonen
Reviewers: aran, jungejason, tuomaspelkonen
Commenters: aran
CC: aran, tuomaspelkonen, epriestley
Differential Revision: 296
Summary:
I never actually wrote this controller.
Test Plan:
Deleted a repository via web UI.
Reviewed By: tuomaspelkonen
Reviewers: tuomaspelkonen, jungejason, aran
Commenters: aran
CC: aran, tuomaspelkonen, epriestley
Differential Revision: 231
Summary:
there are several places we open an 'r' connection but use it
for writing. Fix them.
Test Plan:
ran parse_one_commit.php against one revision which executes
the code with problem. It used to throw exception. Now it works fine.
Reviewed By: Girish
Reviewers: tuomaspelkonen, Girish
Commenters: aran
CC: aran, Girish
Differential Revision: 213
Summary:
I pretty shortsightedly made sending a side effect of save() in the case that a
server is configured for immediate sending. Move this out, make it explicit, and
get rid of all the tangles surrounding it.
The web tool now ignores the server setting and only repsects the checkbox,
which makes far more sense.
Test Plan:
Sent mails from Maniphest, Differential, and the web console. Also ran all the
unit tests. Verified headers from Maniphest.
Reviewed By: rm
Reviewers: aran, rm
CC: tuomaspelkonen, rm, jungejason, aran
Differential Revision: 200
Summary:
See T129, some older git doesn't have %B and we can reasonably fake it with %s
and %b.
Test Plan:
Reparsed all of the Phabricator repository with this worker, commit messages
look fine.
Reviewed By: rm
Reviewers: rm, aran, jungejason, tuomaspelkonen
CC: aran, rm
Differential Revision: 209
Summary:
the Repository tool is missing the standard application link
at the top. The reason is that PhabricatorRepositoryListController and
several other classes are inheriting from a wrong class.
Test Plan:
play with the application to make sure it is not breaking
other stuff.
Reviewed By: epriestley
Reviewers: epriestley
CC: jungejason, epriestley
Differential Revision: 70
Summary: Basic scaffolding for repository tracking, plus daemon infrastructure
(Timelines, Cursors) and some fixes (memory usage, mysql_connect() junk).
Test Plan: parsed Javelin git commit history via daemon
Reviewers:
CC:
