Summary:
Ref T2015. After introducing ApplicationSearch, the left nav turned into a soupy mess. Split the major sections into four separate areas, and unify them with a simple console.
This also reverts all the prefix stuff, since the results were awful and I don't anticipate it ever being the best solution to any UX problem.
Test Plan:
Browsed blueprints, resources, leases and logs.
Here's the new console:
{F93279}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7833
Summary: Ref T2015. Update DrydockLog for policy awareness and give it a policy query.
Test Plan: Browsed all the log interfaces.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7831
Summary: Ref T2015. This turns the side nav into a bigger mess for now, but uses ApplicationSearch for blueprints.
Test Plan: Queried blueprints in the UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7829
Summary:
Ref T2015. These never got updated to the new stuff, move them out of the old `Constants` class and let them load handles, etc.
Also some half-cleanup of some Blueprint/BlueprintImplementation stuff.
Test Plan: Used `phid.query` to query a Resource, Lease, and Blueprint.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7828
Summary: See thread; fixes fatal. The actual name of this method is `getHarbormaster...`.
NOTE: This fixes a fatal in Differential which impedes review, so I'm pushing it as-is.
Test Plan: Browsed a revision.
Reviewers: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7834
Summary:
Ref T2015. Applies ApplicationSearch to DrydockLease.
This makes the left nav in Drydock a little funky. It will probably get worse for a bit before it gets better, since I want to bring everything to ApplicationSearch and then sort out the details.
Test Plan: Queried leases in Drydock.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7827
Summary: Ref T2015. DrydockLease predates widespread adoption of policies. Make it -- and its query -- policy aware.
Test Plan: Browsed leases from the web UI. Grepped for callsites.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2015
Differential Revision: https://secure.phabricator.com/D7826
Summary:
Ref T1049. Adds `bin/harbormaster` and `bin/harbormaster build` for applying plans from the console. Since this gets `--trace`, it's much easier to debug what's going on.
This doesn't work properly with some of the Drydock steps yet, I need to look at those. I think `setRunAllTasksInProcess` probably obsoletes some of the mechanisms. It might also not work with "Wait for Builds" but I didn't check.
Test Plan: Used `bin/harbormaster` to run a bunch of builds. Ran builds from web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7825
Summary:
Ref T1049. Generally, it's useful to separate test/trial/manual runs from production/automatic runs.
For example, you don't want to email a bunch of people that the build is broken just because you messed something up when writing a new build plan. You'd rather try it first, then promote it into production once you have some good runs.
Similarly, test runs generally should not affect the outside world, etc. Finally, some build steps (like "wait for other buildables") may want to behave differently when run in production/automation than when run in a testing environment (where they should probably continue immediately).
So, formalize the distinction between automatic buildables (those created passively by the system in response to events) and manual buildables (those created explicitly by users). Add filtering, and stop the automated parts of the system from interacting with the manual parts (for example, we won't show manual results on revisions).
This also moves the "Apply Build Plan" to a third, new home: instead of the sidebar or Buildables, it's now on plans. I think this generally makes more sense given how things have developed. Broadly, this improves isolation of test environments.
Test Plan: Created some builds, browsed around, used filters, etc.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7824
Summary: Ref T1049. Adds "Repository", "Revision", "Diff" and "Commit" as searchable fields.
Test Plan: Used all the fields to filter things.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7823
Summary:
Fixes T4195. Allows you to write a rule against a commit's branches.
This completes outstanding work on T4195.
Test Plan: Pushed to Git and Mercurial repositories and verified branches were selected correctly by examining transcripts.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7820
Summary: See comments in <https://secure.phabricator.com/D6331#comment-3> -- make the Conduit Token and Conduit Certificate interfaces readonly and select-on-click.
Test Plan:
- Viewed `/conduit/token/`, verified it was readonly and selected on click.
- Viewed `/settings/panel/conduit/`, likewise.
Reviewers: Avish, btrahan, wotte
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7819
Summary:
Ref T4257. Currently, the pull logic looks like this:
if (new) {
create();
} else {
if (hosted) {
install_hooks();
} else {
update();
}
}
This means that the first time you run `repository pull`, hooks aren't installed, which makes debugging trickier. Instead, reorganize the logic:
if (new) {
create();
} else {
if (!hosted) {
update();
}
}
if (hosted) {
install_hooks();
}
Test Plan: Ran `bin/repository pull` on a new `hg` repo and got hooks installed immediately.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4257
Differential Revision: https://secure.phabricator.com/D7818
Summary:
Fixes T4257. The `hg heads` command exits with an error code and no output in an empty repository.
Just ignore the error code: we don't have a great way to distinguish between errors, and we ran another `hg` command moments before, so we have at least some confidence it isn't a PATH sort of thing.
Test Plan: Created a new Mercurial repository and pushed to hit the error in T4257. Applied this fix and got a clean push with an accurate push log.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4257
Differential Revision: https://secure.phabricator.com/D7817
Summary: A user is reporting a re-lock in this daemon, which I can't
reproduce, but might be possible if this throws. Stop it from throwing in
a way which evades unlock.
See: <https://github.com/facebook/phabricator/issues/476>
Auditors: btrahan
Summary: add support for "assignee" conditions
Test Plan: Create a Herald rule where condition is assignee, and create a task assign to someone.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7813
Summary:
Fixes two issues:
- When rendering a task's details, we currently issue a policy-oblivious query. Instead, issue a policy-aware query.
- The formatting is a little bit weird, with the top half in a box and the bottom half with an older style. Make them consistent.
Test Plan: Looked at the detail pages for several tasks in queue.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7812
Summary:
Ref T4195. This allows you to write rules which disallow merge commits.
Also make the reject message a little more useful.
Test Plan:
remote: This push was rejected by Herald push rule H27.
remote: Change: commit/daed0d448404
remote: Rule: No Merges
remote: Reason: No merge commits allowed. If you must push a merge, include "@force-merge" in the commit message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7809
Summary: Ref T4195. Ref T2783. We have an old-school implementation of this; move it into a LowLevel query and make callers all run through Conduit. I need the LowLevel query for hooks, to implement an "is merge commit" Herald rule.
Test Plan:
- Ran query via Conduit for SVN, Mercurial, Git.
- Parsed a commit which closed a revision, attach/closed worked correctly.
- Browsed Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195, T2783
Differential Revision: https://secure.phabricator.com/D7808
Summary: Refs T4195. Fixes T3936. You can't currently write rules like "block commits unless they're attached to an **accepted** revision"; allow that.
Test Plan: Pushed commits into a rule with this field, saw it work / not crash.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, mbishopim3
Maniphest Tasks: T3936, T4195
Differential Revision: https://secure.phabricator.com/D7807
Summary: Ref T4195. Allows you to write revision-based commit hooks, e.g. block all commits with no corresponding revision.
Test Plan:
Here's are the fields populating:
{F90989}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7806
Summary: Ref T4195. I need to query commit metadata to figure out which revision a commit is associated with. Move this out of the MessageParser so the code can be called from the HookEngine.
Test Plan: Used `reparse.php` to reparse a variety of SVN, Mercurial and Git commits. Used `var_dump()` to verify sensible fields were returned.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7805
Summary: Ref T4195. I need this for the Herald pre-commit rules, and it generally simplifies things.
Test Plan: Used `reparse.php` plus `var_dump()` to inspect refs in Git, Mercurial and SVN repos. They all looked correct and reparsed correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7804
Summary:
There's no particular reason to allow the user to edit the clone URI field in Diffusion; editing it has no meaning and if you fat finger the keyboard, it's quite possible that the user will either accidentally clear and/or modify the URI before copying (bit me this morning).
Adding a readonly attribute to the input field allows the same benefit (URI is easily selectable) while preventing such accidental input. Fixes T4246.
Test Plan: Verified that the desired behavior is present in both Chrome, Safari, and Firefox. Field remains selectable with one click, but field is not editable.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4246
Differential Revision: https://secure.phabricator.com/D7810
Summary: Ref T4195. Adds "Author" and "Committer" fields.
Test Plan:
Created a rule using these fields:
{F90897}
...then pushed git, mercurial and svn commits and verified the correct values populated in the transcript:
{F90898}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7802
Summary:
Ref T4195. To implement the "Author" and "Committer" rules, I need to resolve author/committer strings into Phabricator users.
The code to do this is currently buried in the daemons. Extract it into a standalone query.
I also added `bin/repository lookup-users <commit>` to test this query, both to improve confidence I'm getting this right and to provide a diagnostic command for users, since there's occasionally some confusion over how author/committer strings resolve into valid users.
Test Plan:
I tested this using `bin/repository lookup-users` and `reparse.php --message` on Git, Mercurial and SVN commits. Here's the `lookup-users` output:
>>> orbital ~/devtools/phabricator $ ./bin/repository lookup-users rINIS3
Examining commit rINIS3...
Raw author string: epriestley
Phabricator user: epriestley (Evan Priestley )
Raw committer string: null
>>> orbital ~/devtools/phabricator $ ./bin/repository lookup-users rPOEMS165b6c54f487c8
Examining commit rPOEMS165b6c54f487...
Raw author string: epriestley <git@epriestley.com>
Phabricator user: epriestley (Evan Priestley )
Raw committer string: epriestley <git@epriestley.com>
Phabricator user: epriestley (Evan Priestley )
>>> orbital ~/devtools/phabricator $ ./bin/repository lookup-users rINIH6d24c1aee7741e
Examining commit rINIH6d24c1aee774...
Raw author string: epriestley <hg@yghe.net>
Phabricator user: epriestley (Evan Priestley )
Raw committer string: null
>>> orbital ~/devtools/phabricator $
The `reparse.php` output was similar, and all VCSes resolved authors correctly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1731, T4195
Differential Revision: https://secure.phabricator.com/D7801
Summary: Ref T4195. Even though we use `svnlook` in the hook itself, I need this query elsewhere, so provide it and merge the classes into one which does the right thing.
Test Plan:
- Used `reparse.php` to reparse messages for Git, SVN and Mercurial commits, using `var_dump()` to examine the commit refs for sanity.
- Used `reparse.php` to reparse changes for an SVN commit.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7800
Summary: Ref T4249. Currently, a global rule can only trigger project audits. Although there probably aren't a huge number of use cases for triggering users from global rules, it works fine and it's somewhat confusing not to allow it.
Test Plan: {F90902}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4249
Differential Revision: https://secure.phabricator.com/D7803
Summary: There were a number of places that were generating nonsense queries for both hosted and non-hosted subversion repositories.
Test Plan: Attempted several activities in Diffusion with both a hosted and non-hosted subversion repository, including viewing various types of diffs and raw files.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7799
Summary: Ref T4010. I'll hold this for a bit, but we should eventually drop this table once the dust has settled.
Test Plan: Ran storage upgrade.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7372
Summary: If you push a large binary and the data crosses multiple data frames, we can end up in a loop in the parser.
Test Plan:
After this change, I was able to push a 95MB binary in 7s, which seems reasonable:
>>> orbital ~/repos/INIS $ svn st
A large2.bin
>>> orbital ~/repos/INIS $ ls -alh
total 390648
drwxr-xr-x 6 epriestley admin 204B Dec 18 17:14 .
drwxr-xr-x 98 epriestley admin 3.3K Dec 16 11:19 ..
drwxr-xr-x 7 epriestley admin 238B Dec 18 17:14 .svn
-rw-r--r-- 1 epriestley admin 80B Dec 18 15:07 README
-rw-r--r-- 1 epriestley admin 95M Dec 18 16:53 large.bin
-rw-r--r-- 1 epriestley admin 95M Dec 18 17:14 large2.bin
>>> orbital ~/repos/INIS $ time svn commit -m 'another large binary'
Adding (bin) large2.bin
Transmitting file data .
Committed revision 25.
real 0m7.215s
user 0m5.327s
sys 0m0.407s
>>> orbital ~/repos/INIS $
There may be room to improve this by using `PhutilRope`.
Reviewers: wrotte, btrahan, wotte
Reviewed By: wotte
CC: aran
Differential Revision: https://secure.phabricator.com/D7798
Summary: Ref T4195. Same as D7793, but for mercurial. (As usual, SVN needs some goofy nonsense instead, so the next diff will just make this field work.)
Test Plan: Ran `reparse.php` on Git and Mercurial commits, var_dump'd the output and it looked correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7795
Summary: Ref T4195. I need to issue this command from the pre-commit hook to get commit bodies for hooks.
Test Plan: Ran `reparse.php --message --trace` and dumped the $ref, which looked correct.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7793
Summary: We currently have a lot of calls to `addCrumb(id(new PhabricatorCrumbView())->...)` which can be expressed much more simply with a convenience method. Nearly all crumbs are only textual.
Test Plan:
- This was mostly automated, then I cleaned up a few unusual sites manually.
- Bunch of grep / randomly clicking around.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7787
Summary: Ref T4195. Add Mercurial support to the content hook phase.
Test Plan:
Here are some `commit` push logs for a Mercurial repo:
{F90689}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7792
Summary: Ref T4195. Adds support for diff content rules.
Test Plan: Pushed SVN and Git changes through, saw them generate reasonable transcripts. Mercurial still isn't hooked up to this phase.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7791
Summary: Ref T4195. This doesn't provide any interesting fields yet (content, affected paths, commit message) but fires the hook correctly.
Test Plan: Added a blocking hook and saw it fire.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7789
Summary: Allow Herald rules to be referred to with `H123`, etc., like other object types are. Herald rules now have proper PHIDs and an increasingly prominent role in triggering application actions. Although I suspect users will rarely use `H123` in Remarkup to mention rules, this can simplify some of the interfaces which relate objects across systems.
Test Plan: Looked at various interfaces and saw `H123` names. Mentioned `H123` in remarkup.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7786
Summary:
These just got copy/pasted like crazy, the base class has the correct default implementation.
(I'm adding "H" for Herald Rules, which is why I was in this code.)
I also documented the existing prefixes at [[ Object Name Prefixes ]].
Test Plan: Verified base implementation. Typed some object names into the jump nav.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Differential Revision: https://secure.phabricator.com/D7785
Summary:
A few users have hit cases where Herald transcripts of large commits exceed the MySQL packet limit, because one of the fields in the transcript is an enomrous textual diff.
There's no value in saving these huge amounts of data. Transcripts are useful for understanding the action of Herald rules, but can be reconstructed later. Instead of saving all of the data, limit each field to 4KB of data.
For strings, we just truncate at 4KB. For arrays, we truncate after 4KB of values.
Test Plan: Ran unit tests. Artificially decreased limit and ran transcripts, saw them truncate properly.
Reviewers: btrahan
Reviewed By: btrahan
CC: frgtn, aran
Differential Revision: https://secure.phabricator.com/D7783
Summary:
Ref T615. Ref T4237. With `--debug`, Mercurial will echo an "ignoring untrusted configuration option" warning **to stdout** if `.hgrc` has the wrong owner.
However, we need `--debug` to make `{parents}` usable, at least until the patches I got into the upstream are widely deployed. So after getting `--debug` output, strip off any leading warnings.
These warnings should always be in English, at least, since we set `LANG` explicitly.
Test Plan: Unit tests. @asherkin, maybe you can confirm this? I can't actually get the warning, but I think my `hg` in PATH is just a bit out of date.
Reviewers: asherkin, btrahan
Reviewed By: asherkin
CC: asherkin, aran
Maniphest Tasks: T615, T4237
Differential Revision: https://secure.phabricator.com/D7784
Summary: Ref T4195. Herald rules gained PHIDs only recently, propagate them to HeraldEffect to make some of the hook stuff eaiser.
Test Plan: iiam
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7781
Summary: Ref T4195. We need these in Herald, since HeraldTranscripts need to refer to a PHID which they acted upon.
Test Plan:
Ran migration, got PHIDs:
mysql> select phid from repository_pushlog limit 3;
+--------------------------------+
| phid |
+--------------------------------+
| PHID-PSHL-25jnc6cjgzw5rwqgmr7r |
| PHID-PSHL-2vrvmtslkrj5yv7nxsv2 |
| PHID-PSHL-34x262zkrwoka6mplony |
+--------------------------------+
3 rows in set (0.00 sec)
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7780
Summary: Ref T4195. SVN has no such thing as refs (I was thinking about writing a quasi-ref anyway like `HEAD: r23 -> r24`, but I'm not sure it would actually be useful). And content is very easy to build.
Test Plan: Pushed some stuff to SVN, got logs from it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7766
Summary: Ref T4195. This doesn't actually work like I thought it did: it only fires locally, when you run `hg tag`. Mercurial tags are also weird and basically don't make any sense and everyone should use bookmarks instead. We could implement some flavor of this eventually, but I'd like to see users request it first. They can implement their own with content-based hooks once those work, anyway.
Test Plan: This code didn't do anything.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7765
Summary:
Ref T4195. This pulls the central logic of HookEngine up one level and makes all the git stuff genrate PushLogs.
In future diffs, everything will generate PushLogs and we can hand those off to Herald.
Test Plan:
Pushed a pile of valid/invalid stuff:
{F89256}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7761
Summary: Fixes T4241. Ref T4206. See T4241 for a description here. Generally, when we connect a fat pipe (`git-upload-pack`) to a narrow one (`git` over SSH) we currently read limitless data into memory. Instead, throttle reads until writes catch up. This is now possible because of the previous changes in this sequence.
Test Plan:
- Ran `git clone` and `git push` on the entire Wine repository.
- Observed CPU and memory usage.
- Memory usage was constant and low, CPU usage was high only during I/O (which is expected, since we have to actually do work, although thre might be room to further reduce this).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4241, T4206
Differential Revision: https://secure.phabricator.com/D7776
Summary: Until we implement an "enum" type for config, make this a bit harder to get wrong. A user entered "TLS", but the correct value is "tls". The documentation is consistent about this, but the behavior is sitll surprsing.
Test Plan: eyeballed it
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7778
Summary:
Fixes T4239. Currently, if you go to `/maniphest/?authors=alincoln`, operations dependent on the query key (like "Save Custom Query..." and "Export to Excel...") don't have a query key to work with. Make sure they have one.
Also remove a stray `phlog()`.
Test Plan: "Save Custom Query...", etc., now work on GET queries.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4239
Differential Revision: https://secure.phabricator.com/D7777
Summary: Ref T4189. Updates the Phabricator stuff to use the new, more sensible semantics from D7769. Basically, this works correctly now and doesn't need workarounds.
Test Plan: Pushed Wine repo in 1m13s.
Reviewers: btrahan, zeeg
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7770
Summary: Not every revision belongs to a repository, so we might end up here with `$repo` still equal to `null`. Don't fatal if we do.
Test Plan: iiam
Reviewers: btrahan, hach-que, zeeg
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7771
Summary: Patches can exceed the 30 second time out in most PHP installations. This removes the patch preview from the version controller so that users can still see the information (although they may not be able to download the actual patch).
Test Plan: Viewed a version and saw that the patch didn't appear.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7767
Summary: This implements support for enforcing and setting policies in Phragment.
Test Plan: Set policies and ensured they were enforced successfully.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7751
Summary:
Ref T4107. Two issues:
- With strict MySQL settings, we try to insert `null` into the non-nullable `messageCount` field. Add an `initializeNew...` method.
- If we don't create a new conpherence (for example, because the message body is empty), we fatal on `getPHID()` right now.
Also, make this stuff a little easier to test.
Test Plan: Used `mail_handler.php` to receive empty conpherence mail, and new-thread conpherence mail.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4107
Differential Revision: https://secure.phabricator.com/D7760
Summary:
See <https://github.com/facebook/phabricator/issues/467>. @dctrwatson also ran into an issue where we were trying to `setPass()` a GitURI.
- For Git and Mercurial, properly generate credential URIs where relevant.
- Don't try to `setPass()` on Git-style URIs.
This isn't perfect but should clean things up a bit.
Test Plan: Added unit tests. Lots of `grep`.
Reviewers: btrahan
Reviewed By: btrahan
CC: dctrwatson, aran
Differential Revision: https://secure.phabricator.com/D7759
Summary: This is a small fix for Phortune so that policies don't prevent the user accounts from being implicitly created when they first visit Phortune.
Test Plan: Visited Phortune and it worked.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7758
Summary: Fixes T4224. If you `git merge-base A B`, and they have //no// ancestor, the command exits with an error. Assume errors mean "no ancestry" and continue.
Test Plan: Completely rewrite a repository with a `--force` push.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4224
Differential Revision: https://secure.phabricator.com/D7756
Summary: Fixes T4225. Adds the NON_EXISTS condition to Herald for "Reviewers", and adds a few more conditions which have reasonable meanings.
Test Plan: Used test console to check a revision with reviewers, and another without reviewers. Both produced the expected results.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4225
Differential Revision: https://secure.phabricator.com/D7757
Summary: We run `git` on a different port than 22, so would like to reflect this change in the UI.
Test Plan: Set diffusion.ssh-port in settings, then make sure it's reflected on the Diffusion repository Clone URI.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, dctrwatson
Differential Revision: https://secure.phabricator.com/D7755
Summary: Fixes T4223. The output of `ls-tree` is partially delimited by spaces
and partially delimited by `\t`. The code I added in D7744 to help debug the
issue in T4159 doesn't work properly for files with 7 or more bytes in their
filesize, because the internals use `%7s`.
Auditors: btrahan
Summary:
This provides a `phragment.getstate` and a `phragment.getpatch` Conduit method.
`phragment.getstate` - This returns the current state of the fragment and all of it's children.
`phragment.getpatch` - This accepts a base path and a mapping of paths to hashes. The mapping is for the caller to specify the current state of the files it has. This returns a list of patches that the caller needs to apply to it's files to get to the latest version.
Test Plan:
Ran the following script in a folder which had content matching a fragment and it's children:
```
#!/bin/bash
STATE=""
for i in $(find ./ -type f); do
HASH=$(cat $i | sha1sum | awk '{ print $1 }')
BASE=${i:2}
STATE="$STATE,\"$BASE\":\"$HASH\""
done
STATE=${STATE:1}
STATE="{$STATE}"
echo '{"path":"tychaia3.zip","state":'$STATE'}' | arc --conduit-uri=http://phabricator.local/ call-conduit phragment.getpatch
```
and I got:
```
{"error":null,"errorMessage":null,"response":[]}
```
I updated one of the child fragments with a new file and ran the script again (patch has been omitted due to it's size):
```
{"error":null,"errorMessage":null,"response":[{"path":"Content\/TitleFont.xnb","hash_old":"4a927d7b90582e50cdd330de9f4b59b0cc5eb5c7","hash_new":"25867504642a3a403102274c68fbb9b430c1980f","patch":"..."}]}
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, staticshock
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7739
Summary: This adds a build step which will block a build from continuing if there are previous builds of the build plan still running.
Test Plan: Configured a build plan with a wait of 60 seconds and a "wait for previous builds", then started a build. While that was still building, reconfigured the plan to have a wait time of 3 seconds, started it, and saw it move into the "Waiting" status. When the 60 second build finished, both builds passed.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7745
Summary:
This came up recently in a discussion with @lifeihuang, and then tangentally with @hach-que. Make it easier for users to get a sense of whether they might need to add more daemons. Although we've improved the transparency of daemons, it's not easy for non-experts to determine at a glance how close to overflowing the queue is.
This number is approximate, but should be good enough for determining if your queue is more like 25% or 95% full.
If this goes over, say, 80%, it's probably a good idea to think about adding a couple of daemons. If it's under that, you should generally be fine.
Test Plan: {F88331}
Reviewers: btrahan, hach-que, lifeihuang
Reviewed By: btrahan
CC: hach-que, lifeihuang, aran, chad
Differential Revision: https://secure.phabricator.com/D7747
Summary: Most checks were actually in place, but `ExecFuture` throws a `CommandException` which wasn't taken into account.
Test Plan: look at the first command and no longer saw an exception. Also, other commits worked as well.
Reviewers: richardvanvelzen
Reviewed By: richardvanvelzen
CC: krisbuist, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7730
Summary:
Ref T1049. See discussion in D7745. We have some specific interest in this for D7745, but generally we want to consume tasks with expired leases in roughly FIFO order, just like we consume new tasks in roughly FIFO order. Currently, when we select an expired task we order them by `id`, but this is the original insert order, not lease expiration order. Instead, order by `leaseExpires`.
This query is actually much better than the old one was, since the WHERE part is `leaseExpries < VALUE`.
Test Plan: Ran `EXPLAIN` on the query. Ran a taskmaster in debug mode and saw it lease new and expired tasks successfully.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7746
Summary: This adds a build step in Harbormaster for publishing file artifacts as fragments in Phragment.
Test Plan:
Created a build plan with the following steps:
* Lease Host
* Upload Artifact
* Publish Fragment
Ran the build plan against a buildable and saw the fragment get created in Phragment. Ran the plan again and saw the fragment get updated with a new version. Modified the file that got uploaded and ran the plan again, checked the history of the fragment, and saw the differences represented as a Diff-Match-Patch patch.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7742
Summary:
Ref T4212. This implements snapshots in Phragment, which allows you to take a snapshot of a fragment at a given point in time, and download a ZIP of the snapshot as it was in this state.
There's also functionality for deleting and promoting snapshots. You can promote a snapshot to either the latest version or any other snapshot of the fragment.
Test Plan: Clicked around, took some snapshots, promoted them to different points and deleted snapshots. Also downloaded ZIPs of the snapshots and saw the right versions coming through for all the files downloaded.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205, T4212
Differential Revision: https://secure.phabricator.com/D7741
Summary:
This functionality allows users to revert a fragment to a previous version from the history page.
Reverting a version actually creates a new version pointing at the same file as the version being "reverted" to. In this sense it acts pretty much like Git and other distributed VCS where once you have published a commit the only way to undo your changes is to create a new commit that reverts those changes.
Test Plan: Reverted a fragment to a version before it was deleted, then reverted it to when it was deleted and saw the new versions have the correct file PHIDs (including null for the deletion).
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7738
Summary: This updates Phragment so that fragments that are currently considered deleted have a disabled status and have an additional attribute 'Deleted'. It also places this effect on versions (in the history controller) that actually involve deleting the file.
Test Plan: Viewed deleted fragments and versions.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7737
Summary: When the code to update based on ZIP went to look up the child fragments, it explicitly used the paths provided in the ZIP. This meant that we could never detect omissions because there'd never be a scenario where a child fragment would return but not exist in the ZIP. To fix this, the query should be using `withLeadingPath` instead of `withPaths`.
Test Plan: Uploaded a ZIP that omitted a file and saw the `deleteFile` get called (by placing debugging output in the code).
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7736
Summary: This logic causes an exception because getPHID() is called on a fragment that has no latest version. This fixes the code so that in this scenario, it returns an empty array (with no path to be added to the ZIP).
Test Plan: Downloaded the ZIP successfully after the patch was applied.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7735
Summary:
This adds support for viewing individual versions on a fragment as well as comparing versions and downloading diff_match_patch-based patches.
It does not use the side-by-side diff format as while it works for small changes, it quickly becomes impossible to distingush what changes have been made due to the diff_match_patch format.
Test Plan: Clicked on versions and downloaded patches.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7734
Summary: This fixes the update-from-ZIP functionality so that it will automatically detect directories in the ZIP that do not have explicit entries. Some ZIP programs do not create directory entries explicitly, so if we fail to do this then there's no way for users to access the sub-fragments (even though they exist, there is no directory fragment to click through).
Test Plan: Created and updated fragments from a ZIP that had implicit directories in it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, staticshock
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7733
Summary:
This implements support for creating and updating fragments from ZIP files. It allows you to upload a ZIP via the Files application, create a fragment from it, and have it recursively imported into Phragment. Updating that folder with another ZIP will recursively create, update and delete files as appropriate.
The logic for creating and updating fragments from files has also been centralized into the PhragmentFragment class. Directories are also now supported; a directory fragment is simply a fragment that has no patches; thus a directory fragment can be converted to a file fragment by uploading a first patch for it.
Test Plan: Uploaded ZIP files through the interface and saw all of the fragments get created and updated as expected.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7729
Summary: Depends on D7727. This adds support for downloading a fragment and all it's children as a ZIP file. Fragments that have children automatically become directories in the ZIP file.
Test Plan: Downloaded a fragment as a ZIP and was able to extract the contents successfully.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7728
Summary: Depends on D7726. This adds a history controller (for viewing a list of patches associated with a fragment) and an update controller, for creating a new patch of a fragment.
Test Plan: Updated and viewed history of fragments.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7727
Summary: Ref T4205. This is an initial implementation of Phragment. You can create and browse fragments in the system (but you can't yet view a fragment's patches / history).
Test Plan: Clicked around and created fragments.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4205
Differential Revision: https://secure.phabricator.com/D7726
Summary:
If you do something like this:
// Missing $user->getPHID()!
$object->setUserPHID($user)->save();
...you get a very unhelpful exception:
Expected a scalar or null for %s conversion. Query: %s
This doesn't give you any hints about what's wrong. Instead, provide a more useful exception:
Unable to insert or update object of class DifferentialRevision, field 'title' has a nonscalar value.
Test Plan: {F87614}
Reviewers: hach-que, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7725
Summary:
A user sent a message to Phabricator which looked like:
On blah blah blah ?
On <date>, <user> wrote:
> blah blah blah
The current algorithm is too aggressive and thinks lines 1-3 are //all// the "On ... wrote:" string. Instead, patch only the most recent "On".
Test Plan: Added a failing test and made it pass.
Reviewers: btrahan, zeeg
Reviewed By: zeeg
CC: aran
Differential Revision: https://secure.phabricator.com/D7732
Summary: This adds a handful of 'Main Header' colors to change the look of Phabricator very slightly. I know I would probably set my dev header to a different color.
Test Plan: Tested each css class and color, can add more in the future.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7731
Summary: This implements support for explicitly marking the sequence of build steps. Users can now drag and re-order build steps in plans, and artifact dependencies are re-calculated so that if you move "Run Command" before "Lease Host", the "Run Command" step has it's artifact setting cleared and thus the step becomes invalid.
Test Plan: Re-ordered build steps and observed dependencies being correctly recalculated.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7715
Summary: This implements a build step for uploading an artifact from a build machine to Phabricator. It uses SFTP so that it will work on both UNIX and Windows build machines.
Test Plan: Ran an "Upload Artifact" build against a Windows machine (with FreeSSHD installed). The artifact uploaded to Phabricator, appeared on the build view and the file contents could be viewed from Phabricator.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7582
Summary: This locks push logs down a little bit and makes them slightly more administrative. Primarily, don't show IPs to googlebot, etc.
Test Plan: Viewed push logs as edit and non-edit users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7722
Summary:
`PhabricatorPolicyFilter` has a bug right now where it lets through objects incorrectly if:
- the query requests two or more policies;
- the object satisfies at least one of those policies; and
- policy exceptions are not enabled.
This would be bad, but there's only one call in the codebase which satisfies all of these conditions, in the Maniphest batch editor. And it's moot anyway because edit operations get another policy check slightly later. So there is no policy/security impact from this flaw.
(The next diff relies on this behavior, which is how I caught it.)
Test Plan:
- Added a failing unit test and made it pass.
- Grepped the codebase for `requireCapabilities()` and verified that there is no security impact. Basically, 99% of callsites use `executeOne()`, which throws anyway and moots the filtering.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7721
Summary:
Ref T4195. Like the previous diffs, these both create a useful log and give us an object to hand off to Herald.
Surface this information in Diffusion, too, and clean things up a little bit.
Test Plan: {F87565}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7718
Summary: Ref T4195. Add UI options to filter push logs by pusher and repository. Add a link from the repository view page to the push logs.
Test Plan: Viewed a hosted repository, clicked logs link, saw logs. Filtered lgos by repo/pusher.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7713
Summary: Ref T4195. Stores remote address and protocol in the logs, where possible.
Test Plan: Pushed some stuff, looked at the log, saw data.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7711
Summary:
Ref T4195. This log serves two purposes:
- It's a log, so you can see what happened. Particularly, in Git/Hg, there is no other way to tell:
- Who //pushed// a change (vs committed / authored)?
- When was a change pushed?
- What was the old value of some tag/branch before someone destroyed it?
- We can hand these objects off to Herald to implement pre-commit rules.
This is a very basic implementation, but gets some data written and has a basic UI for it.
Test Plan: {F87339}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4195
Differential Revision: https://secure.phabricator.com/D7705
Summary:
Report from Asana. In some unclear circumstances, we my attempt to resolve duplicate refs which currently ends up hitting a duplicate key error.
Instead, reference the same external object if we happen to be handed duplicate refs.
Test Plan:
Used this script to reproduce the issue. Applied the fix; issue went away:
#!/usr/bin/env php
<?php
require_once 'scripts/__init_script__.php';
$args = new PhutilArgumentParser($argv);
$args->parseStandardArguments();
$ref = id(new DoorkeeperObjectRef())
->setApplicationType(DoorkeeperBridgeAsana::APPTYPE_ASANA)
->setApplicationDomain(DoorkeeperBridgeAsana::APPDOMAIN_ASANA)
->setObjectType(DoorkeeperBridgeAsana::OBJTYPE_TASK)
->setObjectID(7253737283629); // Use a new task ID which we've never pulled.
$refs = array(clone $ref, clone $ref);
$asana_user = id(new PhabricatorPeopleQuery())
->setViewer(PhabricatorUser::getOmnipotentUser())
->withUsernames(array('asana'))
->executeOne();
$resolved_refs = id(new DoorkeeperImportEngine())
->setViewer($asana_user)
->setRefs($refs)
->execute();
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7709
Summary: Gives a slight bg color to ObjectList (cards only) when it's embedded in an ObjectBox.
Test Plan: Review External Accounts
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7717
Summary: We were getting a weird double box here, missed it my first pass
Test Plan: Review logged in Maniphest and Paste, as well as logged out versions. Test Login flow.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7716
Summary: I inadvertantly removed this rule and I am very fond of it.
Test Plan: Browse history in Diffusion, header links are dark again
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7714
Summary: This cleans up the UI of closed tasks in Maniphest task view, removes the Foot and sets view to disabled.
Test Plan: Searched for all tasks
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7712
Summary: These arguments prevent stderr from being routed correctly for Linux hosts and break Windows entirely. Removing them fixes the issue.
Test Plan: Removed those options and both Linux and Windows hosts had their output fed back into Harbormaster correctly.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T1029
Differential Revision: https://secure.phabricator.com/D7710
Summary: Currently the "Edit Build Plan" page crashes if there are any build steps with invalid implementations (because the implementation class has been removed or renamed). This updates the Edit Build Plan page so that steps with invalid implementations can be deleted.
Test Plan: Looked at a build plan with invalid configurations and deleted it's steps.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T1049
Differential Revision: https://secure.phabricator.com/D7708
Summary: This migrates the "Run Remote Command" build step over to use Drydock hosts and Harbormaster artifacts.
Test Plan:
Created a build plan with a "Lease Host" step and a "Run Command" step. Configured the "Run Command" step to use the artifact from the "Lease Host" step.
Saw the results:
{F87377}
{F87378}
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049, T4111
Differential Revision: https://secure.phabricator.com/D7707
Summary:
This adds LeaseHostBuildStepImplementation for getting leases on hosts in Drydock via Harbormaster. It stores the resulting lease in an artifact.
There is also a few bug fixes as well.
Test Plan: Created a build plan with a "Lease Host" build step. Ran the build plan and saw the build pass and the artifact in the database.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049, T4111
Differential Revision: https://secure.phabricator.com/D7706
Summary: This implements build targets as outlined in D7582. Build targets represent an instance of a build step particular to the build. Logs and artifacts have been adjusted to attach to build targets instead of build / build step pairs.
Test Plan: Ran builds and clicked around the interface. Everything seemed to work.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T1049
Differential Revision: https://secure.phabricator.com/D7703
Summary: Ref T4151. These are a (common) variant of "ssh-dsa" keys (which are somewhat theoretical, but show up on Google).
Test Plan: syntax
Reviewers: btrahan, dctrwatson, phpcodemonkey
Reviewed By: phpcodemonkey
CC: aran
Maniphest Tasks: T4151
Differential Revision: https://secure.phabricator.com/D7704
Summary:
Ref T1715. When the user clicks "Download Raw Diff" in Differential, we try to build a diff of exactly what they're seeing. However:
- This doesn't work if any of the changes have multiple hunks, and fixing it seems hard.
- I suspect this diff is never actually useful anyway? And probably kind of confusing in the best case. You can't really apply it to anyhting, since you'd have to apply another diff first.
Instead, just build the right-side diff, which should align well with user expectation and doesn't suffer from the multi-hunk bug.
Some day, we could maybe add some of the fancy options in T1715.
See: <https://github.com/facebook/phabricator/issues/461>
Test Plan: Downloaded a multi-hunk diff, got the original back and applied it cleanly.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1715
Differential Revision: https://secure.phabricator.com/D7694
Summary: This updates DrydockSSHCommandInterface to correctly hold open the private key credentials for the life of the interface so that remote commands will execute correctly with a text-based private key.
Test Plan: Created a text-based private key, created a resource based on it and leased against it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111
Differential Revision: https://secure.phabricator.com/D7700
Summary: Depends on D7695. This updates preallocated hosts to use Passphrase credentials. Due to the way SSH private key text credentials work (the TempFile disappears before SSH commands can be executed), this only supports file-based private keys at the moment.
Test Plan:
Created a Passphrase credential for a file-based SSH key. Allocated a resource with:
```
bin/drydock create-resource --blueprint 1 --name "My Linux Host" --attributes platform=linux,host=localhost,port=22,path=/var/drydock,credential=2
```
and successfully leased it.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T1049
Differential Revision: https://secure.phabricator.com/D7697
Summary: This prevents issues when the user hasn't provided the appropriate attributes for a preallocated host.
Test Plan: Attempted to lease against a resource with omitted attributes, got an exception thrown before any SSH commands occurred.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7695
Summary: Fixes T4198. We don't currently show "(Maniphest) > T123 > Edit" on the edit screen, which is inconsistent. Add the "T123" crumb.
Test Plan: {F87177}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4198
Differential Revision: https://secure.phabricator.com/D7699
Summary: The link pointed to `create/`, which gives as `404`.
Test Plan: clicked the link. It worked.
Reviewers: epriestley, #blessed_reviewers, chad
Reviewed By: chad
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7698
Summary: Fixes D7669
Test Plan: test many participants and many threads in Conpherence, mobile and desktop.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7696
Summary: Touch up /notifications/ for desktop and mobile
Test Plan: Tested read and unread notifications on mobile and desktop
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7671
Summary:
Ref T4189. This doesn't add any rules yet, but does all the heavy lifting to figure out what's changed and put it in a consuamble (if somewhat ad-hoc) datastructure, which lists all the ref and tag modifications and all the new commits in a consistent way.
From here, it should be fairly straightforward to add top-level rules (e.g., ff pushes only).
Test Plan: Output is huge, see comments.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7687
Summary: This adds the ability to float action buttons inside ObjectHeaderView.
Test Plan: Tested a UI Example on desktop and mobile. Will test on Notifications next.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7684
Summary: There's no guarantee that the local path has a trailing "/". We
should probably guarantee that at some point, but just add one
unconditionally for now.
Auditors: btrahan
Summary:
//(this diff used to be about applying policies to blueprints)//
This restructures Drydock so that blueprints are instances in the DB, with an associated implementation class. Thus resources now have a `blueprintPHID` instead of `blueprintClass` and DrydockBlueprint becomes a DAO. The old DrydockBlueprint is renamed to DrydockBlueprintImplementation, and the DrydockBlueprint DAO has a `blueprintClass` column on it.
This now just implements CAN_VIEW and CAN_EDIT policies for blueprints, although they are probably not enforced in all of the places they could be.
Test Plan: Used the `create-resource` and `lease` commands. Closed resources and leases in the UI. Clicked around the new and old lists to make sure everything is still working.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4111, T2015
Differential Revision: https://secure.phabricator.com/D7638
Summary: Ref T4189. Fixes T2066. Mercurial has a //lot// of hooks so I'm not 100% sure this is all we need to install (we may need separate hooks for tags/bookmarks) but it should cover most of what we're after at least.
Test Plan:
- `bin/repository pull`'d a Mercurial repo and got a hook install.
- Pushed to a Mercurial repository over SSH and HTTP, with good/bad hooks. Saw hooks fire.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2066, T4189
Differential Revision: https://secure.phabricator.com/D7685
Summary:
Ref T4189. This adds SVN support, which was a little more messy than I though. Principally, we can not use `PHABRICATOR_USER` for Subversion, because it strips away the entire environment for "security reasons".
Instead, use `--tunnel-user` plus `svnlook author` to figure out the author.
Also fix "ssh://" clone URIs, which needs to be "svn+ssh://".
Test Plan:
- Made SVN commits through the hook.
- Made Git commits, too, to make sure I didn't break anything.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7683
Summary:
Ref T4189. T4189 describes most of the intent here:
- When updating hosted repositories, sync a pre-commit hook into them instead of doing a `git fetch`.
- The hook calls into Phabricator. The acting Phabricator user is sent via PHABRICATOR_USER in the environment. The active repository is sent via CLI.
- The hook doesn't do anything useful yet; it just veifies basic parameters, does a little parsing, and exits 0 to allow the commit.
Test Plan:
- Performed Git pushes and pulls over SSH and HTTP.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4189
Differential Revision: https://secure.phabricator.com/D7682
Summary: Cleans up the UI a little on the Object Selector.
Test Plan: Test various layouts, attach and unattach tasks and diffs.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7661
Summary: Make Conpherence usable when there is a setup issue as well. Fixes T3427
Test Plan: Test an ongoing thread, create a new thread. Test mobile and tablet layouts.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3427
Differential Revision: https://secure.phabricator.com/D7669
Summary: This makes the pager a little more button like.
Test Plan: tested UIexamples and a search query
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7670
Summary: DrydockResource has been updated to be policy-aware (although there are no policy columns).
Test Plan: Clicked around in Drydock, viewed resources and leases, everything still seemed to work.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3605, T4111
Differential Revision: https://secure.phabricator.com/D7595
Summary: If there is no /query in the URL, the default query would be lost when clicking Next, causing the search form to be shown on the second page. This is not so likely to happen on a standard Phabricator installation because the default query is Assigned, and few people will have 100+ tasks assigned.
Test Plan:
* Go to /maniphest/query/edit/
* Move Open Tasks to the top
* Go to /maniphest/
* Click Next on the bottom right
* See only tasks that are actually open
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7667
Test Plan: Go to a project page, make browser window narrow, click to expand action list.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7666
Summary: `LANG=C` is smooshing UTF-8 in some cases. See IRC.
Test Plan: User confirmed this works.
Reviewers: btrahan, asherkin
Reviewed By: asherkin
CC: aran
Differential Revision: https://secure.phabricator.com/D7659
Summary:
By default in search application document status field is "Open and Closed Documents".
Often searching with this default status I get confused that open and closed items in
search result are not distinguished.
Test Plan: Search and see open/closed issues distinguished.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: epriestley
CC: epriestley, aran, Korvin
Differential Revision: https://secure.phabricator.com/D7626
Summary: Request from Asana. Adds an option for adding tasks to projects.
Test Plan: Used `bin/feed republish` to create and update Asana tasks with projects configured. Saw them end up in the right projects.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7655
Summary: See D7653. This is exclusively for Asana, who uses Differential for a post-commit, Audit-like workflow but has a small set of requirements for it to be a good fit (just this) and a large set of requirements for Diffusion/Audit to be a good fit.
Test Plan: Set the flag, verified "Accepted" revisions are no longer on the dashboard.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7654
Summary:
Currently, "Closed" and "Abandoned" are treated as "closed". I want to add a flag which treats "Accepted" as "Closed", too, for Asana and other companies who use an Asana-like workflow.
The background here is that their workflow is a bit weird. They basically do audits, but have a lot of things which Diffusion doesn't do well right now. This one change makes Differential fit their workflow fairly well, even though it's an audit workflow.
To prepare for this, normalize the definition of "closed" better. We have a few callsites which explicitly check for "ABANDONED || CLOSED", and normalizing this is cleaner anyway.
Also delete the very old COMMITTED status, which has been obsolete for over a year.
Test Plan: Browsed around most/all of the affected interfaces.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7653
Summary: Fixes T4148. LDAPS works with "ldaps://", it just isn't documented or clear.
Test Plan: {F84893}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4148
Differential Revision: https://secure.phabricator.com/D7652
Summary: Fixes T4149. This could be a little cleaner (configurable time limits, explicit timeout errors) but stop the major case of looping/infinite commands.
Test Plan: Added `sleep 5 &&` and set timeout to 1, saw an error + kill.
Reviewers: btrahan, skyronic
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4149
Differential Revision: https://secure.phabricator.com/D7651
Summary:
Fixes T4158. Two possible refinements:
- Maybe we should make all of these things respect `ManiphestCapabilityEditAssign::CAPABILITY`, etc. I think it's reasonable either way, and this is probably more intuitive and useful for most cases.
- Maybe we should check that you can see the policies before copying them. Again, this is sort of reasonable either way.
Test Plan: Created a new task from a template, saw that it inherited policies.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T4158
Differential Revision: https://secure.phabricator.com/D7649
Summary: Fixes T3687. Instead of rendering "JIRA Issues" in Differential using plain links, render them using Doorkeeper tags so they get the nice "enhance with object name" effect.
Test Plan: {F84886}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3687
Differential Revision: https://secure.phabricator.com/D7648
Summary: Touched up the layout, css of this page
Test Plan: Viewed linked and linkable accounts. Tested mobile layout
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7644
Summary: Fixes T4155. See discussion in T4155.
Test Plan: @mbishopim3 confirmed this fixes his issue.
Reviewers: btrahan, chad
Reviewed By: chad
CC: mbishopim3, aran
Maniphest Tasks: T4155
Differential Revision: https://secure.phabricator.com/D7646
Summary: Adds an action icon for GitHub.
Test Plan: I couldnt see how to update that icon in Differential. But. Photoshop.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7635
Summary: This was broken in rP51fb1ca16d7f.
Test Plan: Imported a repository with file:/// location, it worked.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7636
Summary: Fixes T2230. This isn't a total walk in the park to configure, but should work for early adopters now.
Test Plan: Read documentation, browsed UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7634
Summary:
Ref T4038. This adds everything except the actual pushing part for mirrors.
This isn't the most beautiful or sophisticated UI, but I want get the authoritative repositories self-hosted and get users beta-ing hosting as soon as possible. We can do transactions, etc., later on.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4038
Differential Revision: https://secure.phabricator.com/D7632
Summary: Fixes T4122. Ref T2230. Instead of storing credentials on each repository, store them in Passphrase. This allows easy creation/management of many repositories which share credentials.
Test Plan:
- Upgraded repositories.
- Created and edited repositories.
- Pulled HTTP and SSH repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230, T4122
Differential Revision: https://secure.phabricator.com/D7629
Summary: Ref T4122. Add an edge to keep track of where a credential is used, and show it in the UI.
Test Plan:
See "Used By":
{F84099}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7628
Summary: Ref T4122. These classes provide typed, checked access to credentials, so you can say "give me this password, and throw if anything is funky".
Test Plan: Used in next revision.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7625
Summary:
Ref T4122.
- For Diffusion, we need "allow null" (permits selection of "No Credential") for anonymous HTTP repositories.
- For Diffusion, we can make things a little easier to configure by prefilling the username.
Test Plan: Used UIExample form. These featuers are used in a future revision.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7624
Summary:
This adds a Drydock blueprint for preallocated, remote hosts. This will be used by the Harbormaster interface to allow users to specify remote hosts that builds can be run on.
This adds a `canAllocateResource` method to Drydock blueprints; it is used to detect whether a blueprint can allocate a resource for the given type and attributes.
Test Plan:
Ran:
```
bin/drydock lease --type host --attributes remote=true,preallocated=true,host=192.168.56.101,port=22,user=james,keyfile=,path=C:\\Build\\,platform=windows
```
and saw the "C:\Build\<id>" folder appear on the remote Windows machine. Viewed the lease and resource in Drydock as well.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, jamesr
Maniphest Tasks: T4111
Differential Revision: https://secure.phabricator.com/D7593
Summary: Show SSH user on git-over-ssh repositories and hide both username and password for other repos.
Test Plan: View repository details page in diffusion, Clone URI should appear with a username (taken from repo config) and any http(s) repos should be without usernames.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4147
Differential Revision: https://secure.phabricator.com/D7631
Summary: Simplifies the code a bit and fixes all the wonky previews. Fixes T4053
Test Plan: Test all pages, logged in and logged out.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4053
Differential Revision: https://secure.phabricator.com/D7622
Summary: D7590 made path construction more consistent, but affected this callsite if a subpath is configured. Currently, we end up with double `@@` in the URI.
Test Plan:
- Ran unit tests.
- Ran `bin/repostitory discover`.
Reviewers: staticshock, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7619
Summary:
Ref T4140. We could hit a redirect loop for a user with a verified primary email address but no "is verified" flag on their account. This shouldn't be possible since the migration should have set the flag, but we can deal with it more gracefully when it does happen (maybe because users forgot to run `storage/upgrade`, or because of ghosts).
In the controller, check the same flag we check before forcing the user to the controller.
When verifying, allow the verification if either the email or user flag isn't set.
Test Plan: Hit `/login/mustverify/`; verified an address.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4140
Differential Revision: https://secure.phabricator.com/D7621
Summary: Ref T4140. Provide more debugging information so we can figure out what's going on with redirect loops.
Test Plan: {F83868}
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4140
Differential Revision: https://secure.phabricator.com/D7620
Summary: Ref T4140. Allow unapproved users to verify their email addresses. Currently, unapproved blocks email verification, but should not.
Test Plan: Clicked email verification link as an unapproved user, got email verified.
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4140
Differential Revision: https://secure.phabricator.com/D7618
Summary: ...and get the basic edit flow "working" for a new NuanceSourceDefinition - the Phabricator Form. ...and fix a dumb bug in the query class so when you redirect to the view page / try to edit an existing NuanceSource you don't fatal.
Test Plan: played around with the edit form and it worked!
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7585
Summary:
Fixes T4041. We currently detect when "origin" is incorrect, but can do better:
- When "origin" is missing, we can add it. This happens for Git 1.7.1 -- see T4041.
- When "origin" is wrong, we can fix it automatically if we control the repository.
We only need to fail when origin exists, is wrong, and we aren't in charge of the repository.
Test Plan: Ran `bin/repository discover X` on a repository with a good origin, no origin, a bad-but-under-control origin, and a bad-out-of-control origin. Got the right behavior in all cases.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, champo
Maniphest Tasks: T4041
Differential Revision: https://secure.phabricator.com/D7614
Summary:
This cleans up some garbage:
- We were specifying environmental variables with `X=y git ...`, but now have `setEnv()` on both `ExecFuture` and `PhutilExecPassthru`. Use `setEnv()`.
- We were specifying the working directory with `(cd %s && git ...)`, but now have `setCWD()` on both `ExecFuture` and `PhutilExecPassthru`. Use `setCWD()`.
- We were specifying the Git credentials with `ssh-agent -c (ssh-add ... && git ...)`. We can do this more cleanly with `GIT_SSH`. Use `GIT_SSH`.
- Since we have to write a script for `GIT_SSH` anyway, use the same script for Subversion and Mercurial.
This fixes two specific issues:
- Previously, we were not able to set `-o StrictHostKeyChecking=no` on Git commands, so the first time you cloned a git repo the daemons would generally prompt you to add `github.com` or whatever to `known_hosts`. Since this was non-interactive, things would mysteriously hang, in effect. With `GIT_SSH`, we can specify the flag, reducing the number of ways things can go wrong.
- This adds `LANG=C`, which probably (?) forces the language to English for all commands. Apparently you need to install special language packs or something, so I don't know that this actually works, but at least two users with non-English languages have claimed it does (see <https://github.com/facebook/arcanist/pull/114> for a similar issue in Arcanist).
At some point in the future I might want to combine the Arcanist code for command execution with the Phabricator code for command execution (they share some stuff like LANG and HGPLAIN). However, credential management is kind of messy, so I'm adopting a "wait and see" approach for now. I expect to split this at least somewhat in the future, for Drydock/Automerge if nothing else.
Also I'm not sure if we use the passthru stuff at all anymore, I may just be able to delete that. I'll check in a future diff.
Test Plan: Browsed and pulled Git, Subversion and Mercurial repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7600
Summary:
Ref T2230. SVN has some weird rules about path construction. Particularly, if you're missing a "/" in the remote URI right now, the change parsing step doesn't build the right paths.
Instead, build the right paths more intelligently.
Test Plan: Added and executed unit tests. Imported an SVN repo.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, jpeffer
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7590
Summary:
Fixes T4132. If you run "bin/auth recover" before setting the base URI, it throws when trying to generate a production URI.
Instead, just show the path. We can't figure out the domain, and I think this is less confusing than showing "your.phabricator.example.com", etc.
Test Plan: Ran `bin/auth recover <user>` for valid and missing base-uri.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4132
Differential Revision: https://secure.phabricator.com/D7615
Summary:
Ref T4122. Implements a credential management application for the uses described in T4122.
@chad, this needs an icon, HA HA HAHA HA BWW HA HA HA
bwahaha
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T4122
Differential Revision: https://secure.phabricator.com/D7608
Summary:
We've been having trouble with viewing diffs timing out when there's a lot of unit test failures. It was caused by formatting userdata for every single failure. The expensive part of this was actually creating the engine for every result, so moved the construction outside of the loop.
Diffs that timed out (2 min) loading before load in around 6 seconds now.
Test Plan: Loaded diffs that used to time out. Verified that details still looked right when Show Full Unit Test Results Is Clicked.
Reviewers: epriestley, keegancsmith, lifeihuang, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, andrewjcg
Differential Revision: https://secure.phabricator.com/D7581
Summary:
Ref T4110. This denormalized field used to power "Group By: Assigned" got dropped in the T2217 migration at some point.
Restore its population, and fix all the data in the database.
Test Plan: Ran migration, verified database came out reasonable-looking. Reassigned a task, verified database. Ran a "Group By: assigned" query.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4110
Differential Revision: https://secure.phabricator.com/D7602
Summary: Fixes T4123. If you click "Profile" on a page, we already profile all the ajax requests it generates. Do the same for "Analyze Query Plans".
Test Plan: Viewed a page with Ajax requests using "Analyze Query Plans", and not using "Analyze Query Plans".
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4123
Differential Revision: https://secure.phabricator.com/D7601
Summary:
Fixes T4109. If a revision has a bad `repositoryPHID` (for example, because the repository was deleted), `DifferentialRevisionQuery` calls `didRejectResult()` on it, which raises a policy exception, even if the viewer is omnipotent. This aborts the `MessageParser`, because it does not expect policy exceptions to be raised for an omnipotent viewer.
Fix this in two ways:
# Never raise a policy exception for an omnipotent viewer. I think this is the expected behavior and a reasonable rule.
# In this case, load the revision for an omnipotent viewer.
This feels a little gross, but it's the only place where we do this in the codebase right now. We can clean this up later on once it's more clear what the circumstances of checks like these are.
Test Plan: Set a revision to have an invalid `repositoryPHID`, ran message parser on it, got a clean parse.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4109
Differential Revision: https://secure.phabricator.com/D7603
Summary:
Ref T2230. When fully set up, we have up to three users who all need to write into the repositories:
- The webserver needs to write for HTTP receives.
- The SSH user needs to write for SSH receives.
- The daemons need to write for "git fetch", "git clone", etc.
These three users don't need to be different, but in practice they are often not likely to all be the same user. If for no other reason, making them all the same user requires you to "git clone httpd@host.com", and installs are likely to prefer "git clone git@host.com".
Using three different users also allows better privilege separation. Particularly, the daemon user can be the //only// user with write access to the repositories. The webserver and SSH user can accomplish their writes through `sudo`, with a whitelisted set of commands. This means that even if you compromise the `ssh` user, you need to find a way to escallate from there to the daemon user in order to, e.g., write arbitrary stuff into the repository or bypass commit hooks.
This lays some of the groundwork for a highly-separated configuration where the SSH and HTTP users have the fewest privileges possible and use `sudo` to interact with repositories. Some future work which might make sense:
- Make `bin/phd` respect this (require start as the right user, or as root and drop privileges, if this configuration is set).
- Execute all `git/hg/svn` commands via sudo?
Users aren't expected to configure this yet so I haven't written any documentation.
Test Plan:
Added an SSH user ("dweller") and gave it sudo by adding this to `/etc/sudoers`:
dweller ALL=(epriestley) SETENV: NOPASSWD: /usr/bin/git-upload-pack, /usr/bin/git-receive-pack
Then I ran git pushes and pulls over SSH via "dweller@localhost". They successfully interacted with the repository on disk as the "epriestley" user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7589
Summary: Although I don't want to end up with 20 of these again, this is a reasonable default to provide, particularly for installs where a large portion of the userbase primarily reports bugs and does not interact with them directly.
Test Plan: Hit `/maniphest/`, saw "Subscribed", clicked it, saw the tasks I'm subscribed to.
Reviewers: jbrown, btrahan
Reviewed By: jbrown
CC: aran
Maniphest Tasks: T4100
Differential Revision: https://secure.phabricator.com/D7586
Summary:
A usable, Land to GitHub flow.
Still to do:
- Refactor all git/hg stratagies to a sane structure.
- Make the dialogs Workflow + explain why it's disabled.
- Show button and request Link Account if GH is enabled, but user is not linked.
- After refreshing token, user ends up in the settings stage.
Hacked something in LandController to be able to show an arbitrary dialog from a strategy.
It's not very nice, but I want to make some more refactoring to the controller/strategy/ies anyway.
Also made PhabricatorRepository::getRemoteURIObject() public, because it was very useful in getting
the domain and path for the repo.
Test Plan:
Went through these flows:
- load revision in hosted, github-backed, non-github backed repos to see button as needed.
- hit land with weak token - sent to refresh it with the extra scope.
- Land to repo I'm not allowed - got proper error message.
- Successfully landed; Failed to apply patch.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D7555
Summary:
Ref T4039. This fixes an issue where a user with the ability to create repositories could view repositories he is otherwise not permitted to see, by following these steps:
- Suppose you want to see repository "A".
- Create a repository with the same VCS, called "B".
- Edit the local path, changing "/var/repo/B" to "/var/repo/A".
- Now it points at a working copy of a repository you can't see.
- Although you won't be able to make it through discovery (the pull will fail with the wrong credentials), you can read some information out of the repository directly through the Diffusion UI, probably?
I'm not sure this was really practical to execute since there are a bunch of sanity checks along most/all of the major pathways, but lock it down since normal users shouldn't be editing it anyway. In the best case, this would make a mess.
Test Plan: {F81391}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4039
Differential Revision: https://secure.phabricator.com/D7580
Summary:
Ref T4039. This is mostly to deal with that, to prevent the security issues associated with mutable local paths. The next diff will lock them in the web UI.
I also added a confirmation prompt to `bin/repository delete`, which was a little scary without one.
See one comment inline about the `--as` flag. I don't love this, but when I started adding all the stuff we'd need to let this transaction show up as "Administrator" it quickly got pretty big.
Test Plan: Ran `bin/repository edit ...`, saw an edit with a transaction show up on the web UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4039
Differential Revision: https://secure.phabricator.com/D7579
Summary:
Fixes T4095. Fixes T3817.
- The batch editor has some funky handle code which misses projects, share that.
- Remove some hacks for T3817 that should be good now.
Test Plan: Looked at batch editor, saw projects. Looked at task list.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, martin.schulz
Maniphest Tasks: T3817, T4095
Differential Revision: https://secure.phabricator.com/D7578
Summary:
Fixes T3741. The flag is respected in terms of actually creating the account, but the UI is a bit unclear.
This can never occur naturally, but installs can register an event which locks it.
Test Plan:
Artificially locked it, verified I got more reasonable UI;
{F81282}
Reviewers: btrahan, datr
Reviewed By: datr
CC: aran
Maniphest Tasks: T3741
Differential Revision: https://secure.phabricator.com/D7577
Summary:
- Add an option for the queue.
- By default, enable it.
- Dump new users into the queue.
- Send admins an email to approve them.
Test Plan:
- Registered new accounts with queue on and off.
- As an admin, approved accounts and disabled the queue from email.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7576
Summary:
- If you're an administrator and there are users waiting for approval, show a count on the home page.
- Sort out the `isUserActivated()` access check.
- Hide all the menu widgets except "Logout" for disabled and unapproved users.
- Add a "Log In" item.
- Add a bunch of unit tests.
Test Plan: Ran unit tests, clicked around as unapproved/approved/logged-in/logged-out users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, chad
Differential Revision: https://secure.phabricator.com/D7574
Summary:
Nothing fancy here, just:
- UI to show users needing approval.
- "Approve" and "Disable" actions.
- Send "Approved" email on approve.
- "Approve" edit + log operations.
- "Wait for Approval" state for users who need approval.
There's still no natural way for users to end up not-approved -- you have to write directly to the database.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7573
Summary:
Mailbox sometimes (?) changes the case of the email address (?). Be more liberal in what we accept.
Also fix a minor output bug.
Test Plan: Sent mail to `e1+...` instead of `E1+...`, verified it arrived.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7575
Summary:
Small step forward which improves existing stuff or lays groudwork for future stuff:
- Currently, to check for email verification, we have to single-query the email address on every page. Instead, denoramlize it into the user object.
- Migrate all the existing users.
- When the user verifies an email, mark them as `isEmailVerified` if the email is their primary email.
- Just make the checks look at the `isEmailVerified` field.
- Add a new check, `isUserActivated()`, to cover email-verified plus disabled. Currently, a non-verified-but-not-disabled user could theoretically use Conduit over SSH, if anyone deployed it. Tighten that up.
- Add an `isApproved` flag, which is always true for now. In a future diff, I want to add a default-on admin approval queue for new accounts, to prevent configuration mistakes. The way it will work is:
- When the queue is enabled, registering users are created with `isApproved = false`.
- Admins are sent an email, "[Phabricator] New User Approval (alincoln)", telling them that a new user is waiting for approval.
- They go to the web UI and approve the user.
- Manually-created accounts are auto-approved.
- The email will have instructions for disabling the queue.
I think this queue will be helpful for new installs and give them peace of mind, and when you go to disable it we have a better opportunity to warn you about exactly what that means.
Generally, I want to improve the default safety of registration, since if you just blindly coast through the path of least resistance right now your install ends up pretty open, and realistically few installs are on VPNs.
Test Plan:
- Ran migration, verified `isEmailVerified` populated correctly.
- Created a new user, checked DB for verified (not verified).
- Verified, checked DB (now verified).
- Used Conduit, People, Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7572
Summary:
Ref T3472. Currently, if an install only allows "@mycompany.com" emails and you try to register with an "@personal.com" account, we let you pick an "@mycompany.com" address instead. This is secure: you still have to verify the email. However, it defies user expectation -- it's somewhat confusing that we let you register. Instead, provide a hard roadblock.
(These accounts can still be linked, just not used for registration.)
Test Plan: See screenshot.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3472
Differential Revision: https://secure.phabricator.com/D7571
Summary: See private chatter. Make it explicitly clear when adding a provider that anyone who can browse to Phabricator can register.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7570
Summary: We don't actually support this yet, so hide the configuration.
Test Plan: Edited branches for an hg repo.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7563
Summary:
Ref T2230. As far as I can tell, getting SVN working over HTTP is incredibly complicated. It's all DAV-based and doesn't appear to have any kind of binary we can just execute and pass requests through to. Don't support it for now.
- Disable it in the UI.
- Make sure all the error messages are reasonable.
Test Plan: Tried to HTTP an SVN repo. Tried to clone a Git repo with SVN, got a good error message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7562
Summary:
Fixes T3034. This is obsoleted by modern policies.
This was written by a Facebook intern and is rarely used -- the Hive install might be the only use in the wild. It has never really worked correctly.
Test Plan: `grep`; browsed Differential.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3034
Differential Revision: https://secure.phabricator.com/D7568
Summary: Fixes T3535. Also, flip flop on that spacing thing and make the spaces purdy
Test Plan: got an arcanist projected phid in the json dict
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3535
Differential Revision: https://secure.phabricator.com/D7565
Summary: adds FIELD_PROJECTS and deploys it to Maniphest Task Herald Adapter. Went with "projects" because it feels like that could go well in other Adapters that want to conditionalize based on project.
Test Plan: made a new herald rule to be cc'd if project foo was on a task. it worked!
Reviewers: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7564
Summary:
Ref T2230. Very rarely, even though we've flushed the connection and sent all the data, we'll close the connection before Git is happy with it and it will flip out with an error like this:
fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed
This is hard to reproduce because it depends on the order of read/write operations we can't directly control. I only saw it about 2% of the time, by just running `git pull` over and over again.
Waiting for Git to close its side of the connection seems to fix it.
Test Plan: Ran `git clone` a ton of times without seeing the error again. Ran `git push` a ton of times with new commits.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7558
Summary:
Ref T2230. The SVN protocol has a sensible protocol format with a good spec here:
http://svn.apache.org/repos/asf/subversion/trunk/subversion/libsvn_ra_svn/protocol
Particularly, compare this statement to the clown show that is the Mercurial wire protocol:
> It is possible to parse an item without knowing its type in advance.
WHAT A REASONABLE STATEMENT TO BE ABLE TO MAKE ABOUT A WIRE PROTOCOL
Although it makes substantially more sense than Mercurial, it's much heavier-weight than the Git or Mercurial protocols, since it isn't distributed.
It's also not possible to figure out if a request is a write request (or even which repository it is against) without proxying some of the protocol frames. Finally, several protocol commands embed repository URLs, and we need to reach into the protocol and translate them.
Test Plan: Ran various SVN commands over SSH (`svn log`, `svn up`, `svn commit`, etc).
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7556
Summary:
Ref T2230. This is substantially more complicated than Git, but mostly because Mercurial's protocol is a like 50 ad-hoc extensions cobbled together. Because we must decode protocol frames in order to determine if a request is read or write, 90% of this is implementing a stream parser for the protocol.
Mercurial's own parser is simpler, but relies on blocking reads. Since we don't even have methods for blocking reads right now and keeping the whole thing non-blocking is conceptually better, I made the parser nonblocking. It ends up being a lot of stuff. I made an effort to cover it reasonably well with unit tests, and to make sure we fail closed (i.e., reject requests) if there are any parts of the protocol I got wrong.
A lot of the complexity is sharable with the HTTP stuff, so it ends up being not-so-bad, just very hard to verify by inspection as clearly correct.
Test Plan:
- Ran `hg clone` over SSH.
- Ran `hg fetch` over SSH.
- Ran `hg push` over SSH, to a read-only repo (error) and a read-write repo (success).
Reviewers: btrahan, asherkin
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7553
Summary: Ref T2230. Fixes T4079. As it turns out, this is Git being weird. See comments for some detials about what's going on here.
Test Plan: Created shallow and deep Git clones.
Reviewers: hach-que, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4079, T2230
Differential Revision: https://secure.phabricator.com/D7554
Summary: Fixes T4084. See that task for discussion.
Test Plan: Did `git clone`. My setup doesn't precisely reproduce the original issue, but hopefully @enko can confirm this is a fix.
Reviewers: btrahan, enko
Reviewed By: enko
CC: enko, aran
Maniphest Tasks: T4084
Differential Revision: https://secure.phabricator.com/D7561
Summary:
Ref T2230. In Git, we can determine if a command is read-only or read/write from the command itself, but this isn't the case in Mercurial or SVN.
For Mercurial and SVN, we need to proxy the protocol that's coming over the wire, look at each request from the client, and then check if it's a read or a write. To support this, provide a more flexible version of `passthruIO`.
The way this will work is:
- The SSH IO channel is wrapped in a `ProtocolChannel` which can parse the the incoming stream into message objects.
- The `willWriteCallback` will look at those messages and determine if they're reads or writes.
- If they're writes, it will check for write permission.
- If we're good to go, the message object is converted back into a byte stream and handed to the underlying command.
Test Plan: Executed `git clone`, `git clone --depth 3`, `git push` (against no-write repo, got error), `git push` (against valid repo).
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, asherkin, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7551
Summary: Missing some `break;`, pretty sure this is causing the issue on `secure.phabricator.com`.
Test Plan: Will push.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7559
Summary: This CAN_EDIT capability doesn't exist. `PhabricatorMacroCapabilityManage::CAPABILITY` (checked on line 15) is used instead.
Test Plan: Disabled, then re-enabled a macro.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Differential Revision: https://secure.phabricator.com/D7550
Summary:
Now that diffs have PHIDs we can create buildables for them.
This also adds `buildable.diff` in the variables list so the diff ID is available, and it also fixes the Cancel button on "Edit Plan" page so it redirects to the right place.
Test Plan: Created a buildable from a diff, ran a build plan against it that had `echo ${buildable.diff}` and got the right ID. Also tested the "Edit Plan" cancel redirect.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7546
Summary:
This uses an event listener to render the status of builds on their buildables. The revision and commit view now renders out the status of each of the builds.
Currently the revision controller has the results for the latest diff rendered out. We might want to show the status of previous diffs in the future, but for now I think the latest diff should do fine.
There's also a number of bug fixes in this diff, including a particularly nasty one where builds would have a build plan PHID generated for them, which resulted in handle lookups always returning invalid objects.
Test Plan: Ran builds against diffs and commits, saw them appear on the revision and commit view controllers.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7544
Test Plan: This is one of the rare moments where unit tests for views would be useful.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7547
Summary:
Ref T1049. This is very minimal, but does what it says.
I merged the variable replacement code so Remote + HTTP can share more stuff.
Test Plan:
Ran "HTTP" and "Remote" build plans.
{F79886}
{F79887}
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: zeeg, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7541
Summary: This prevents a crash in applying build plans when more than one buildable exists for the same object. It also adds a check into the "New Manual Build" page to ensure that users can't create a buildable for an object that already has one.
Test Plan: Tried to create a buildable for an object that already has one and a nice friendly error appeared. Applied a build plan to a buildable whose object has two buildables and didn't get a crash any more.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7543
Summary:
I just want to make sure that this is the style we want.
It seems less readable to me in some cases.
Test Plan: Looked at DarkConsole with errors.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7533
Summary: This adds a `build.id` variable, cleans up the naming convention of other variables and also fixes an issue in the remote command to read the buffers after the command finishes.
Test Plan: Ran a build with `/bin/echo ${build.id}` and saw the build ID come through.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7540
Summary: This puts back the stronger variable replacement that was missed the last update to D7519.
Test Plan: Re-ran a remote build that had variables in the command and everything worked as expected.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7539
Summary: This fixes an issue where content would be discarded when the content to append is larger than the chunk size limit.
Test Plan: Tested running a remote command that does `I=0; while true; do echo "$I"; I=$[$I+1]; done` and all of the outputted numbers matched the line numbers in the logs.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7537
Summary: This adds a build step implementation for running a command on a remote machine over SSH. It supports merging in various variables about the build (such as the commit hash / revision ID, repository call sign, version control type and clone URI).
Test Plan: Configured a build plan to run `/bin/true` on localhost and the build passed. Configured a build plan to run `/bin/false` on localhost and the build failed.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7519
Summary:
Depends on D7519.
This implements support for build logs in Harbormaster. This includes support for appending to a log from the "Run Remote Command" build step.
It also adds the ability to cancel builds.
Currently the build view page doesn't update the logs live; I'm sure this can be achieved with Javelin, but I don't have enough experience with Javelin to actually make it poll from updates to content in the background.
{F79151}
{F79153}
{F79150}
{F79152}
Test Plan:
Tested this by setting up SSH on a Windows machine and using a Remote Command configured with:
```
C:\Windows\system32\cmd.exe /C cd C:\Build && mkdir Build_${timestamp} && cd Build_${timestamp} && git clone --recursive https://github.com/hach-que/Tychaia.git && cd Tychaia && Protobuild.exe && C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe Tychaia.Windows.sln
```
and observed the output of the build stream from the Windows machine into Phabricator.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7521
Summary: these transactions should //never// merge since they are always created for a 1:1 replacement. (ie any merging would be implicitly erroneous). Fixes T4081
Test Plan: made a mock with three images and replaced all three successfully. replaced image A with image B, did not save, replaced image B with image C, then saved and verified transaction correctly showed image A replaced with image C.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4081
Differential Revision: https://secure.phabricator.com/D7536
Summary:
Depends on D7500.
This seemed like a pretty good idea once I thought of it. Instead of having some custom triggering logic instead Harbormaster, I figured it best to leverage all of Herald's power so that users can create rules to apply builds to commits and differential revisions. This gives the added advantage that they can trigger off builds for particular types of revisions and commits, which seems like it could be really useful (e.g. run extra tests against revisions that touch sensitive areas of the code).
Test Plan: Ran the usual daemons + the Harbormaster daemon. Pushed a commit to the repository and saw both the buildable and build get created when the commit worked picked it up. Submitted a diff and saw both the buildable and build get created when the Herald rules were evaluated for the diff.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, hwinkel
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7501
Summary: another little piece here that basically just adds some permissions to source editing. serving it up before I do anything too complicated to make sure it seems kosher. in terms of what comes next this form needs to be dynamic based on source type so there'll be some fun there. That said, I plan to implement a more simple "phabricator form" only version to start here and flesh out a few other things like queues with that.
Test Plan: set permission to no one for source edit and got a nice error page.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7535
Summary: I've kept this as close as possible to the Git version for ease of review and later refactoring of them both together. At minimum, the functions to get the working dir should probably be cleaned up one day.
Test Plan: Landed a revision.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7534
Summary:
See <https://github.com/facebook/phabricator/issues/433>. We were missing a "^" here.
This should be moved over to transactions soon and then we can get rid of the duplication. :/
Test Plan: Tried to create a repository with callsign "9X", got a helpful error about "ALL UPPERCASE LETTERS".
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7531
Summary:
Fixes T4061. Following the instructions in the documentation with Apache 2.4 (which is installed
with Ubuntu 13.10 and other distributions) will result in a "403 forbidden" error.
The instruction provides information on how to fix it.
Test Plan: Tested on apache 2.4 install
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, asherkin
Maniphest Tasks: T4061
Differential Revision: https://secure.phabricator.com/D7529
Summary:
After upgrading to PHP 5.5, the conduit list was not fully visible because
INF was being treated as "0" for some reason. Fixed by making it a PHP_MAX_INT
Test Plan: Checked on PHP 5.5
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7530
Summary:
Fixes T4067. The way `DiffusionCommitQuery` works prevents it from loading SVN identifiers in some cases without additional constraints, since "12345" might be an SVN revision 12345, or it might be the first 5 characters of a Git commit hash.
Introduce `withRepository()` as a shorthand for `withDefaultRepository()` + `withRepositoryIDs()`. This tells the query to:
- Only look in the given repository; and
- use the more liberal identifier resolution rules while doing so.
The practical impact this has is that blame tooltips in SVN work again. The other queries which are fixed here were never run in SVN (which doesn't have first-class branches or tags); I've cleaned them up only for completeness.
Test Plan:
- Viewed blame in SVN, saw information again instead of empty tooltip.
- Viewed brnaches/tags in Mercurial and Git.
{F79226}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4067
Differential Revision: https://secure.phabricator.com/D7523
Summary:
we were just checking if projects/ was in the URI before barfing. Use some more fun utility functions such that we only complain if there is no project.
Fixes T4071.
Test Plan: made a subpage under a project - success! tried to make a project wiki page where there was no project - successful failure! tried to make a project wiki sub page where there was no project - successful failure!
Reviewers: epriestley, chad
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4071
Differential Revision: https://secure.phabricator.com/D7527
Summary:
See discussion in <https://github.com/facebook/phabricator/issues/430>.
(If we end up with more than like 5 of these we should probably make this a warning or something instead, the only goal is to prevent user error.)
Test Plan:
{F79196}
{F79197}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran, enko
Differential Revision: https://secure.phabricator.com/D7522
Summary: The "Reviewers" condition in Differential Revision rules has the wrong typeahead and can't select projects, but should be able to.
Test Plan: {F79273}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7526
Summary: Ref T2230. This is easily the worst thing I've had to write in a while. I'll leave some notes inline.
Test Plan: Ran `hg clone http://...` on a hosted repo. Ran `hg push` on the same. Changed sync'd both ways.
Reviewers: asherkin, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7520
Summary: This is starting to get a bit sizable and it turns out Mercurial is sort of a beast, so split the VCS serve stuff into a separate controller.
Test Plan: Pushed and pulled an authenticated Git repository.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, hach-que
Differential Revision: https://secure.phabricator.com/D7494
Summary: Ref T4068. Partly, this moves discovery to the more unit-testable PhabricatorRepositoryDiscoveryEngine. It also fixes some issues, see inlines.
Test Plan: In a Mercurial repository, ran `bin/repository discover --repair`, verified commits came out topographically sorted. Ran without `--repair` and in various other contexts, like with no commits to discover and some-but-not-all commits to discover.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4068
Differential Revision: https://secure.phabricator.com/D7518
Summary:
I updated the wiki too - https://secure.phabricator.com/w/projects/pebkac/ - with what I am thinking right now. Rough plan here is
- next diff:
- implement editors and transactions
- implement "web type" for contact source
- /pebkac/item/new/ will be the entry point for this
- implement "actions" on a contact
- probably some "polish" on the scaffolding laid out here; like "create" permissions maybs
- diffs after that:
- implement "twitter" type for source
- implement email reply handler stuff for item and source
Probs a great time to blast huge holes in all this stuff. :D
Test Plan: these pages load and arc lint doesn't complain
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran, chad
Differential Revision: https://secure.phabricator.com/D7465
Summary:
Ref T1049. Ref T2222. `DifferentialDiff` does not currently have a PHID, but we need it for Harbormaster and ApplicationTransactions. See some discussion in D7501.
(I split the SQL into two sections so we can't fail in the middle. At some point, I'd like to do a pass on the migration stuff and get this happening automatically, and also simplify the PatchList.)
Test Plan:
- Ran `bin/storage upgrade`.
- Checked for valid PHIDs in the database.
- Used `phid.query` to look up a diff by PHID.
- Created a new diff and verified it got a PHID.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran, vrana
Maniphest Tasks: T2222, T1049
Differential Revision: https://secure.phabricator.com/D7513
Summary: Ref T4068. Adds a command to list all commits in an "importing" status. This will allow users to use `reparse.php` to diagnose and repair issues.
Test Plan:
- Ran `bin/repository importing P`, etc.
- Used `reparse.php` to reparse some commit stages and saw status update correctly.
- Ran on a repo with no importing commits.
- Ran with `... --simple | xargs`, which saves us having to put an `awk` or something in there for users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4068
Differential Revision: https://secure.phabricator.com/D7515
Summary:
Ref T4068. In some cases like that one, I anticipate a repository not fully importing when a handful of random commits are broken. In the long run we should just deal with that properly, but in the meantime provide an administrative escape hatch so you can mark the repository as imported and get it running normally.
The major reason to do this is that Herald, Feed, Harbormaster, etc., won't activate until a repository is "imported".
Test Plan:
- Tried to mark an imported repository as imported, got an "already imported" message.
- Same for not-imported.
- Marked a repository not-imported.
- Marked a repository imported.
- Marked a repository not-imported, then waited for the daemons to mark it imported again automatically.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, kbrownlees
Maniphest Tasks: T4068
Differential Revision: https://secure.phabricator.com/D7514
Summary: Ref T1049. Nothing fancy, but shows red for fail/error and green for pass. See discussion in D7502.
Test Plan: {F78839}
Reviewers: hach-que, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7512
Summary: Going to remove the workboard shadow area to keep the design less complex visually, shrink icons on mobile view
Test Plan: test uiexamples for new layout changes
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7516
Summary:
Depends on D7501.
This just renders the buildable's actual object name onto the list, so you can see at a glance what the buildable represents. I'd like to also pull across a list of builds of this buildable and change the bar color, but I'm not quite sure how to do that in the search architecture without N+1 querying.
Test Plan:
Looked at the buildable list and it looked like this:
{F78555}
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7502
Summary: Cleans up some CSS while adding lots of other... Mainly, this allow min-width "tables" that trigger a scroll-bar, but go full width if larger than min.
Test Plan: Tested Workboard Examples and some Project pages, Chrome, Tablet and Mobile Layouts
Reviewers: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7509
Summary: This is a little funky but fixes an issue with Git repos that are
non-bare needing "origin/" to resolve branches other than "master". Eventually
this should get cleaned up.
Test Plan: Reporting user verified this fixed their issue.
Auditors: btrahan
Summary: Ref T4064. The response code here isn't normally relevant, but we can hit these via `git clone http://../`, etc., and it's clearly more correct to use HTTP 500.
Test Plan: Added a fake `throw new Exception()` and verified I got an HTTP 500 response.
Reviewers: jamesr, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4064
Differential Revision: https://secure.phabricator.com/D7507
Summary: This implements an interface for adding new build steps, editing existing build steps and deleting build steps from build plans. It uses the settings definitions on the build implementation to work out what fields should be displayed on the edit page.
Test Plan:
See screenshots:
{F78529}
{F78532}
{F78528}
{F78531}
{F78527}
{F78530}
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7500
Summary:
Depends on D7498.
This implements support for a "build step implementation". Build steps have an associated class name (which makes the class in PHP) and a details field, which is serialized JSON (same as PhabricatorRepository).
This also implements a SleepBuildStepImplementation which just pauses the build for a specified period of seconds.
Test Plan:
Inserted a build step with `insert into harbormaster_buildstep (phid, buildPlanPHID, className, details, dateCreated, dateModified) values ('', 'PHID-HMCP-zkh5w6czfbfpk2gxwdeo', 'SleepBuildStepImplementation', '{"seconds":5}', NOW(), NOW());` (adjusting the build plan PHID as appropriate).
Started the daemon and applied the build plan to a buildable, and saw the daemon take a 5 second delay after creating `SleepBuildStepImplementation`.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran, chad
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7499
Summary:
ref T182.
Simple approach of clone, patch, push. While waiting for drydock, implement a hackish mutex
setup for the workspace, which should work ok as long as there's only one committer who is
carefull about theses things.
Less obvious note: This is taking the both author and commiter's 'primary email' for the commit -
which might rub some people wrong.
Test Plan:
With a hosted repo, created some diffs and landed them.
Also clicked button for some error cases, got the right error message.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: hach-que, Korvin, epriestley, aran
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D7486
Summary: This implements a basic Harbormaster daemon that takes pending builds and builds them (currently just sleeps 15 seconds before moving to passed state). It also implements an interface to apply a build plan to a buildable, so that users can kick off builds for a buildable.
Test Plan: Ran `bin/phd debug PhabricatorHarbormasterBuildDaemon` and used the interface to start some builds by applying a build plan. Observed them move from 'pending' to 'building' to 'passed'.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7498
Summary:
Fixes T4060. The logic here is:
- When you take several actions at once, we show a single feed story for all of them.
- We choose the "most interesting" title for the feed story. For example, "close task" is more interesting than "add CC".
Currently, the issue with this is:
- "Add comment" is the //least interesting// title. I think this is correct: all other actions are more interesting than the fact that you added a comment.
- We try to conserve the number of objects we need to load by rendering only the most interesting transaction.
To fix this:
- Stop being so conservative; load all of the transactions and all of their PHIDs.
- Add bodies from any transactions which render bodies. In all cases (I think?) this is a maximum of one comment adding a body.
The end result is a story like this:
epriestley closed T123: the building is on fire.
"Okay guys I put the fire out"
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran, asherkin
Maniphest Tasks: T4060
Differential Revision: https://secure.phabricator.com/D7504
Summary: Fixes the width and some other minor issues.
Test Plan: Tested Mobile and Desktop
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7496
Summary:
Expands on D7488, which looks way better than the config checks. I'm leaving the config checks for now, but maybe we should just get rid of them? This advice is delivered in a far more timely way.
- Check for normal VCS binaries too.
- Link to `environment.append-paths`.
- Get rid of untranslated names (I think they're probably not too useful?)
Test Plan: See screenshots.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Differential Revision: https://secure.phabricator.com/D7495
Summary:
Currently if 'git-http-backend' is not on the PATH, there is no visible message to the user other than "info/refs: is this a valid git repository?" when trying to clone. This adds a setup check so that if there are any Git repositories in use, it will check for the existance of the "git-http-backend" binary in the PATH.
I believe this is shipped by default alongside the git package on most distros, but in some (such as OpenSUSE), this binary isn't on the PATH by default.
Test Plan: Removed `/usr/lib/git` from my `environment.append-paths` and saw the message appear. Added it back and the message went away.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4050
Differential Revision: https://secure.phabricator.com/D7488
Summary:
Ref T1493. Diffusion has some garbagey behavior for things we can't resolve. Common cases are:
- Looking at a branch that doesn't exist.
- Looking at a repository with no branches.
- Looking at a commit that doesn't exist.
- Looking at an empty repository.
In these cases, we generally fatal unhelpfully. I want to untangle this mess.
This doesn't help much, but does clean things up a bit. We currently have two separate query paths, "stablecommitname" and "expandshortcommit". These are pretty much doing the same thing -- taking some ref like "master" or "default" or a tag name or part of a commit name, and turning it into a full commit name. Merge them into a single "resolverefs" method.
This simplifies the code a fair bit, and gives us better error messages. They still aren't great, but they're like this now:
Ref "7498aec194ecf2d333e0e2baddd9d5cdf922d7f1" is ambiguous or does not exist.
...instead of just:
ERR-INVALID-COMMIT
Test Plan: Looked at Git, Mercurial and Subversion repositories that were empty and non-empty. Looked at branches/heads. Tried to look at invalid commits. Looked at tags. All of this still works, and some behaviors are a bit better than they used to be.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1493
Differential Revision: https://secure.phabricator.com/D7484
Summary: Fixes the junk I broke in D7484. Before that, tag content was a side effect of resolving the ref name. Now, fetch it explicitly in `diffusion.tagsquery`.
Test Plan: Looked at a tag, saw the annotation/message.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7485
Summary: This puts Conduit calls into the "Services" tab. They aren't always real service calls, but I think they're big enough to belong there and be useful.
Test Plan: Viewed "Services" tab, saw conduit calls.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7482
Summary: Ref T1493. Consolidate these a bit; they might need some more magic once we do `--noupdate` checkouts. Mostly just trying to clean up and centralize this code a bit.
Test Plan: Viewed and `bin/repository discover`'d Mercurial repos with and without any branches.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1493
Differential Revision: https://secure.phabricator.com/D7480
Summary: The idea is to have all `phtize` definitions in applications to allow their separation.
Test Plan: Clicked View Options after mangling the translation.
Reviewers: epriestley
Reviewed By: epriestley
CC: btrahan, Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7345
Summary: Adds summary (description) and test plan icons to make these area's more unique and differentiated over general sections.
Test Plan: Test a diff, a commit, a task
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7493
Summary: When we stack property sections without a header, we still want a thin line. This adds a line on non-initial sections but not when headers exist. Fixes T4051
Test Plan: Tested Macro, File, Diffusion, a Whacked Profile Page and Maniphest. All lines look right
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4051
Differential Revision: https://secure.phabricator.com/D7492
Summary: This disables CSRF checking around the `$repository->writeStatusMessage` so that pushing changes over HTTP to Git repositories doesn't fail miserably.
Test Plan: Applied this fix and I could `git push` to hosted repositories again.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4052
Differential Revision: https://secure.phabricator.com/D7490
Summary: This fixes an issue where Git authentication would always fail on an install with `policy.allow-public` set to false. This is because when public access is allowed, anonymous users can query the user list. However, when public access is not allowed, you have to be authenticated before you can read any of the user objects.
Test Plan:
Prior to this fix, I get:
```
james@james-laptop:~/git/8> git clone http://phabricator.local/diffusion/TEST/
Cloning into 'TEST'...
fatal: unable to access 'http://phabricator.local/diffusion/TEST/': The requested URL returned error: 403
```
when `policy.allow-public` is false. After this fix I get:
```
james@james-laptop:~/git/8> git clone http://phabricator.local/diffusion/TEST/
Cloning into 'TEST'...
remote: Counting objects: 102, done.
remote: Compressing objects: 100% (71/71), done.
remote: Total 102 (delta 6), reused 0 (delta 0)
Receiving objects: 100% (102/102), 9.89 KiB | 0 bytes/s, done.
Resolving deltas: 100% (6/6), done.
Checking connectivity... done
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4049
Differential Revision: https://secure.phabricator.com/D7489
Summary: This implements Conduit calls for querying Phame blogs and Phame posts.
Test Plan: Made some calls and they seem to generally work.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3695
Differential Revision: https://secure.phabricator.com/D7478
Summary: This adds support for a Conduit method to process Remarkup content in bulk. It also updates the `getEngineContexts` methods to support any missing contexts.
Test Plan: Ran the command and processed a few sets of text.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4046
Differential Revision: https://secure.phabricator.com/D7479
Summary: This adds pht's and such english to Phriction email body.
Test Plan: Edited a Document, Moved a Document. Got new emails. Such Wow.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7477
Summary:
Ref T2230. This will need some more refinement, but basically it adds a "Create" vs "Import" step before we go through the paged workflow.
- If you choose "Create", we skip the remote URI / auth stuff, and then set the "hosted" flag.
- If you choose "Import", we do what we do now.
Test Plan: Created and imported repos.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7475
Summary:
Hosted repositories only sometimes survive the pull/discover phases right now, due to issues like:
- Pull tries to `git clone`, but should `git init`.
- Mercurial doesn't handle empty repositories with on branches.
- SVN tries to connect to an invalid remote.
- None of them set the INIT repo flag correctly, so status doesn't get updated properly in the UI.
Fix all this stuff.
Test Plan:
- For each of Git, SVN and Mercurial:
- Created a new repository from the web UI in a deactivated state.
- Made it hosted.
- Manually ran pull/discover.
- Verified we end up with initialized, empty repositories in consistent states.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7474
Summary:
- Warn about "Read/Write" instead of disabling it, to prevent edits which mutate it after changing a hosted repository to an unhosted one.
- Warn about authenticated connections with HTTPS auth disabled, and link to the relevant setting.
- When "Autoclose" is disabled, show that "Autoclose Branches" won't have an effect.
- For hosted repositories, show the HTTP and SSH clone URIs.
- Make them easy to copy/paste.
- Link to credential management.
- Show if they're read-only.
- This could be a bit nicer-looking than it is.
Test Plan: Looked at repositories in a bunch of states and made various edits to them.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7471
Summary:
See <https://github.com/facebook/phabricator/issues/425>. There are some ways that the change parsers may not reach `finishParse()`, but we now need them to in order to mark the commit imported, advance the progress bar, and eventually kick the repository out of IMPORTING status.
Take all the copy/pasted code in the parsers and move it into the parent. Specifically, this is:
- Printing a status message about starting a parse;
- checking for bad commits;
- queueing the next parse stage; and
- marking the import step complete.
Test Plan: Used `reparse.php --change` to reparse Git, SVN and Mercurial repos.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7470
Summary: Depends on D7642. This updates the authentication logic so that HTTP writes can be made to Git repositories hosted by Phabricator.
Test Plan: Set the policy to allow me to push and I was able to. Changed the policy to disallow push and I was no longer able to push.
Reviewers: #blessed_reviewers, hach-que
Reviewed By: hach-que
CC: Korvin, epriestley, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7468
Summary: This allows users to set their HTTP access passwords via Diffusion interface.
Test Plan: Clicked the "Set HTTP Access Password" link, set a password and saw it appear in the DB.
Reviewers: #blessed_reviewers, hach-que, btrahan
Reviewed By: hach-que
CC: Korvin, epriestley, aran, jamesr
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7462
Summary:
Ref T2350. Fixes T2231.
- Adds log flags around discovery.
- Adds message flags for "needs update". This is basically an out-of-band hint to the daemons that a repository should be pulled sooner than normal. We set the flag when users push a revision, and expose a Conduit method that `arc land` will be able to use.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2350, T2231
Differential Revision: https://secure.phabricator.com/D7467
Summary:
I pulled these into the property list recently, which made them more consistent, but that dropped "preserve linebreaks". Since these usually come from the CLI, render with linebreaks preserved.
@csilvers, you'll need to `bin/cache purge --purge-remarkup` after this if you want to fix existing revisions.
Test Plan: Made a revision with some poetry, saw poetry preserved.
Reviewers: btrahan, csilvers
Reviewed By: btrahan
CC: csilvers, aran
Differential Revision: https://secure.phabricator.com/D7464
Summary: At least under GitHub, the token value is stored as "null", and not missing. And `null > anything` is false, so Phabricator thinks the token is expired or not there.
Test Plan: http://ph.vm/settings/panel/external/ before shows "No OAuth Access Token," and after it says "Active OAuth Token".
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7466
Summary:
`RepositoryStatusMessage` is basically a key/value table associated with a repository that I'm using to let the daemons store the most recent event of a given type, so we can easily show it on the status dashboard. I think this will be a lot easier for users to figure out than digging through logfiles.
I'm also going to write the "this needs a pull" status here eventually, for reducing the time lapse between pushes and discovery.
- Add storage for these messages.
- Have the pull engine populate the INIT phase. I'll do the FETCH phase next.
- Update the status readout to show all the various states.
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7461
Summary: This moved into Diffusion in D7458 and is now presented in a much cleaner, more targeted way.
Test Plan: Loaded `/repository/`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7459
Summary:
Replace the blanket "daemons not running" warning with a lot more specific detail, to try to make it easier for users to figure out how to set up repositories correctly.
The next change here will add some additional status information from the daemons, so this panel can report results in greater detail.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7458
Summary:
- Use DiffusionCommitQuery
- Get rid of the "Author" column.
- Collapse commit + revision together.
- Better tooltips to cover for the removed information.
- Colorize only the "line" column.
- Generally, reduce the amount of visual noise and non-code-stuff going on in this interface.
- I'd like to make the "<<" thing look nicer too but that might take some actual design.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7457
Summary: Minor cleanup. Make the "imported" check less strict (we don't need owners or herald to show change status). Export the "imported" flag over Conduit.
Test Plan: Viewed tag table. Viewed partially imported repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7455
Summary: Swap to DiffusionCommitQuery, other minor cleanup.
Test Plan: Viewed page, forced error view and looked at it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7454
Summary: See @scottmac's reply in T3982. It looks like his email client uses the standard quote string, but includes it in the quoted block.
Test Plan: Added a failing unit test, made it pass.
Reviewers: btrahan
Reviewed By: btrahan
CC: scottmac, aran
Differential Revision: https://secure.phabricator.com/D7440
Summary: I'm planning to add more detailed info to Diffusion itself, but catch the big issue here.
Test Plan: Hit config issue locally, then resolved it.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7439
Summary: The new "importStatus" property provides a much stronger and more consistent version of this flag. The only callsite was removed by D7452.
Test Plan: Used `grep` to check for callsites and found none.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7453
Summary:
Ref T2716.
- Serve from `DiffusionCommitQuery`, not `PhabricatorAuditCommitQuery` (which should probably die).
- Fix logic for `limit`, which incorrectly failed to display the "Showing %d branches." text.
- Clean up things a touch.
- I didn't end up actually needing `needCommitData()`, but left it in there since I think it will be needed soon.
- Removed a "TODO" because I don't remember what "etc etc" means.
Test Plan: Looked at branches in several repositories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2716
Differential Revision: https://secure.phabricator.com/D7451
Summary: If you load Diffusion between a repository being pulled and discovered, you can end up with a valid commit reference that hasn't been discovered yet. Don't fatal.
Test Plan: Saw somewhat-helpful error page instead of fatal.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7448
Summary: Ref T2230. This cleans up D7442, by using `git for-each-ref` everywhere we can, in a basically reasonable way.
Test Plan:
In bare and non-bare repositories:
- Ran discovery with `bin/repository discover`;
- listed branches on `/diffusion/X/`;
- listed tags on `/diffusion/X/`;
- listed tags, branches and refs on `/diffusion/rXnnnn`.
Reviewers: btrahan, avivey
Reviewed By: avivey
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7447
Summary: Fixes T4035. I removed these two "remote/" things in rP59922b7, but we need them for non-bare repositories. Without them, the commands work and run fine and the output looks OK, but the results may not reflect the correct information (e.g., the log shows the working copy's master, which may not be in the same state as origin/master). I'm going to generally clean this up, but unbreak it for now.
Test Plan: Viewed bare and non-bare repositories in Diffusion, got accurate history.
Reviewers: btrahan, hach-que
Reviewed By: btrahan
CC: aran, mbishopim3
Maniphest Tasks: T4035
Differential Revision: https://secure.phabricator.com/D7445
Summary: Makes Legalpad a little easier to grok.
Test Plan: View Document
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7460
Summary: The warning panel on large commits in diffusion was being overrun with other styles. Fixes T3952
Test Plan: test on a large commit
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3952
Differential Revision: https://secure.phabricator.com/D7456
Summary: We don't have a section header on `/diffusion/X/` for descriptions right now. Add one to improve consistency.
Test Plan: Looked at a repository.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7449
Summary: Helps make it seem more q/a like and consistent.
Test Plan: Look at question
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7450
Summary:
Ref T2230. Although all the non-bare commands //run// fine in bare repos, not all of them do exactly the same thing.
This could use further cleanup, but at least get it working again for now.
Test Plan: Ran `bin/repository pull`, `bin/repository discover`, viewed Diffusion (looked at branch table), viewed a commit (looked at "Branches"), for bare and non-bare git repos.
Reviewers: avive, btrahan, avivey
Reviewed By: avivey
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7442
Summary: Updates the review status list to align better inside property lists. Alsu uses the default colors a bit more. This removes an overflow hidden on the value side, but that shouldnt cause any issues, given it has plenty of space.
Test Plan: tested differential and audit, highlighted and not.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7441
Summary:
Relocated files aren't treated as newly created files by the worker. This
can lead to the worker trying to look up information about deleted files
in the wrong location.
Test Plan: See T4030
Reviewers: #blessed_reviewers, epriestley
Reviewed By: epriestley
CC: epriestley, aran
Maniphest Tasks: T4030
Differential Revision: https://secure.phabricator.com/D7432
Summary: Fixes T4028, makes the table a bit easier to read and navigate changesets.
Test Plan: Tested a big history, back to original and latest.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran
Maniphest Tasks: T4028
Differential Revision: https://secure.phabricator.com/D7438
Summary:
Fixes T3619. These URIs are valid:
git@domain.com:/path (Git SCP-style implicit SSH)
ssh://git@domain.com/path (Explicit SSH)
This URI, arrived at by adding "ssh://" to the front of an SCP-style URI, is not:
ssh://git@domain.com:/path
Detect URIs in this form and reject them. See T3619.
Test Plan:
{F75486}
Also set some valid URIs.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3619
Differential Revision: https://secure.phabricator.com/D7431
Summary:
This doesn't really impact anything very much, but is a little cleaner than cloning repositories with a working copy. It's somewhat important for allowing pushes, because you can't push to a checked-out branch.
Mercurial has a similar option (`--noupdate`) but leave that alone for now.
The origin stuff was mostly for sanity/explicitness purposes -- I believe it's safe to remove in all non-ridiculous cases. Git fails with it in bare repositories (it automatically creates an `origin`, but doesn't create the local refs for it, or something).
Test Plan: Nuked a repo, re-cloned it, pulled and updated it several times. Browsed both bare and non-bare repos in Diffusion.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7430
Summary:
Fixes T3217. Ref T776. Ref T1493. Broadly, this introduces a mechanism which works like this:
- When a repository is created, we set an "importing" flag.
- After discovery completes, we check if a repository has no importing commits. Basically, this is the first time we catch up to HEAD.
- If we're caught up, clear the "importing" flag.
This flag lets us fix some issues:
- T3217. Currently, when you import a new repository and users have rules like "Email me on every commit ever" or "trigger an audit on every commit", we take a bunch of publish actions. Instead, implicitly disable publishing during import.
- An imported but un-pulled repository currently has an incomprehensible error on `/diffusion/X/`. Fix that.
- Show more cues in the UI about importing.
- Made some exceptions more specific.
Test Plan:
This is the new screen for a completely new repo, replacing a giant exception:
{F75443}
- Created a repository, saw it "importing".
- Pulled and discovered it.
- Processed its commits.
- Ran discovery again, saw import flag clear.
- Also this repository was empty, which hit some of the other code.
This is the new "parsed empty repository" UI, which isn't good, but is less broken:
{F75446}
Reviewers: btrahan
Reviewed By: btrahan
CC: aran, hach-que
Maniphest Tasks: T3607, T1493, T776, T3217
Differential Revision: https://secure.phabricator.com/D7429
Summary:
Fixes T3416. Fixes T1733.
- Adds a flag to the commit table showing whether or not we have parsed it.
- The flag is set to `0` initially when the commit is discovered.
- The flag is set to `1` when the changes are parsed.
- The UI can now use the flag to distinguish between "empty commit" and "commit which we haven't imported changes for yet".
- Simplify rendering code a little bit.
- Fix an issue with the Message parser for empty commits.
- There's a key on the flag so we can do `SELECT * FROM repository_commit WHERE repositoryID = %d AND importStatus = 0 LIMIT 1` soon, to determine if a repository is fully imported or not. This will let us improve the UI (Ref T776, Ref T3217).
Test Plan:
- Ran `bin/storage upgrade -f`.
- Created an empty commit.
- Without the daemons running, ran `bin/repository pull GTEST` and `bin/repository discover GTEST`.
- Viewed web UI to get the first screenshot ("Still Importing...").
- Ran the message and change steps with `scripts/repository/reparse.php`.
- Viewed web UI to get the second screenshot ("Empty Commit").
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T776, T1733, T3416, T3217
Differential Revision: https://secure.phabricator.com/D7428
Summary:
- Don't try to pull hosted repos.
- Also, fix the `--verbose` + `--trace` interaction for `bin/repository`.
- Also, fix a couple of unit tests which got tweaked earlier.
Test Plan:
$ ./bin/repository pull GTEST --verbose
Pulling 'GTEST'...
Repository "GTEST" is hosted, so Phabricator does not pull updates for it.
Done.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7427
Summary: We've had support for this for a long time, but it was conditional on config. Since it more-or-less actually does something now, just enable it unconditionally.
Test Plan: Settings -> SSH Public Keys
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7426
Summary: Looks like this is pretty straightforward; same as the reads except mark it as needing PUSH.
Test Plan: Ran `git push`, pushed over SSH to a hosted repo.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7425
Summary: Like D7423, but for SSH.
Test Plan: Ran `git clone ssh://...`, got a clone.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7424
Summary: Mostly ripped from D7391. No writes yet.
Test Plan: Ran `git clone` against a local over HTTP, got a clone.
Reviewers: btrahan, hach-que
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7423
Summary:
- Add web UI for configuring SSH hosting.
- Route git reads (`git-upload-pack` over SSH).
Test Plan:
>>> orbital ~ $ git clone ssh://127.0.0.1/
Cloning into '127.0.0.1'...
Exception: Unrecognized repository path "/". Expected a path like "/diffusion/X/".
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/X/
Cloning into 'X'...
Exception: No repository "X" exists!
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/MT/
Cloning into 'MT'...
Exception: This repository is not available over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
>>> orbital ~ $ git clone ssh://127.0.0.1/diffusion/P/
Cloning into 'P'...
Exception: TODO: Implement serve over SSH.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7421
Summary:
Fixes T2229. This sets the stage for a patch similar to D7417, but for SSH. In particular, SSH 6.2 introduced an `AuthorizedKeysCommand` directive, which lets us do this in a mostly-reasonable way without needing users to patch sshd (if they have a recent enough version, at least).
The way the `AuthorizedKeysCommand` works is that it gets run and produces an `authorized_keys`-style file fragment. This isn't ideal, because we have to dump every key into the result, but should be fine for most installs. The earlier patch against `sshd` passes the public key itself, which allows the script to just look up the key. We might use this eventually, since it can scale much better, so I haven't removed it.
Generally, auth is split into two scripts now which mostly do the same thing:
- `ssh-auth` is the AuthorizedKeysCommand auth, which takes nothing and dumps the whole keyfile.
- `ssh-auth-key` is the slightly cleaner and more scalable (but patch-dependent) version, which takes the public key and dumps only matching options.
I also reworked the argument parsing to be a bit more sane.
Test Plan:
This is somewhat-intentionally a bit obtuse since I don't really want anyone using it yet, but basically:
- Copy `phabricator-ssh-hook.sh` to somewhere like `/usr/libexec/openssh/`, chown it `root` and chmod it `500`.
- This script should probably also do a username check in the future.
- Create a copy of `sshd_config` and fix the paths/etc. Point the KeyScript at your copy of the hook.
- Start a copy of sshd (6.2 or newer) with `-f <your config file>` and maybe `-d -d -d` to foreground and debug.
- Run `ssh -p 2222 localhost` or similar.
Specifically, I did this setup and then ran a bunch of commands like:
- `ssh host` (denied, no command)
- `ssh host ls` (denied, not supported)
- `echo '{}' | ssh host conduit conduit.ping` (works)
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, aran
Maniphest Tasks: T2229, T2230
Differential Revision: https://secure.phabricator.com/D7419
Summary:
Mostly ripped from D7391, with some changes:
- Serve repositories at `/diffusion/X/`, with no special `/git/` or `/serve/` URI component.
- This requires a little bit of magic, but I got the magic working for Git, Mercurial and SVN, and it seems reasonable.
- I think having one URI for everything will make it easier for users to understand.
- One downside is that git will clone into `X` by default, but I think that's not a big deal, and we can work around that in the future easily enough.
- Accept HTTP requests for Git, SVN and Mercurial repositories.
- Auth logic is a little different in order to be more consistent with how other things work.
- Instead of AphrontBasicAuthResponse, added "VCSResponse". Mercurial can print strings we send it on the CLI if we're careful, so support that. I did a fair amount of digging and didn't have any luck with git or svn.
- Commands we don't know about are assumed to require "Push" capability by default.
No actual VCS data going over the wire yet.
Test Plan:
Ran a bunch of stuff like this:
$ hg clone http://local.aphront.com:8080/diffusion/P/
abort: HTTP Error 403: This repository is not available over HTTP.
...and got pretty reasonable-seeming errors in all cases. All this can do is produce errors for now.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7417
Summary:
Basically straight from D7391. The differences are basically:
- Policy stuff is all application-scope instead of global-scope.
- Made a few strings a little nicer.
- Deleted a bit of dead code.
- Added a big "THIS DOESN'T WORK YET" warning.
Test Plan: See screenshots.
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7416
Summary: No editing or view yet, just adds the schema and a policy default. Part of D7391.
Test Plan: `bin/storage upgrade`
Reviewers: hach-que, btrahan
Reviewed By: hach-que
CC: aran
Maniphest Tasks: T2230
Differential Revision: https://secure.phabricator.com/D7415
Summary: Ref T2231. Get rid of the old create controller and make the button go to the new stuff instead. This will eventually get cleaned up more, but I don't have a clear plan for Arcanist Projects yet.
Test Plan: Clicked button, hit new workflow.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7414
Summary:
Ref T2231. This:
- Activates the new multi-step workflow, and exposes it in the UI.
- Adds "can create", "default view" and "default edit" capabilities.
- Provides a default value for `repository.default-local-path` and forces repositories into it by default. It's still editable, but Phabricator gets it correct (for some definition of correct) by default now.
Test Plan: Created some new repositories with the new workflow.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1286, T2231
Differential Revision: https://secure.phabricator.com/D7413
Summary:
Ref T2231. I didn't port these options over, so they're still supported but have no edit UI:
- Pull Frequency (confusing/not useful, I think?)
- Default Owners Path (probably used only by Facebook and only in the E repository)
- Show user in public repository URL (probably mostly obsolete with hosting?)
We can add those back if users notice, but they seem like the three least useful options so I'm going to see if we can get away with removing them.
Test Plan: Clicked "Edit" from Repositories, got kicked into the nice new Diffusion edit UI instead of the old one.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7410
Summary: Ref T2231. This just moves the "Delete" dialog from Repositories to Diffusion. This dialog just shows instructions and isn't interesting.
Test Plan: {F75093}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7412
Summary: Ref T2231. Use status info element instead of tags.
Test Plan: {F75092}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7411
Summary: Fixes T1286. Ref T2231. See previous diffs; same as the others but does "Local Path".
Test Plan: See screenshots.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1286, T2231
Differential Revision: https://secure.phabricator.com/D7409
Summary: This adds a set of plain (blueish) icons for use instead of black.
Test Plan: Photoshop
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7434
Summary: I changed some CSS here that was not intended.
Test Plan: Reload a few Diffs, no bottom padding at last diff now.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7433
Summary: Adds consistent spacing, color to this interactive box. Also, I changed it to yellow, if its too much lemme know but feels ok.
Test Plan: tested new colors in differential
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7422
Summary: This fixes the sprite for remarkup and does some minor tweaks for transactions (so Differential looks a little more like timeline)
Test Plan: tested remarkup, differential
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7418
Summary: Ref T2231. Crumbs in the Diffusion edit workflow are a bit wonky, with stuff like "rP (master)" which isn't very useful and no link back to the main "Edit" page. Make them consistent across all the screens.
Test Plan: Loaded a bunch of these screens and saw sane crumbs on all of them.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7407
Summary:
@chad is hitting an issue described in P961, which I think is this bug in PHP: https://bugs.php.net/bug.php?id=43200
Work around it by defining a "PHIDInterface" and having both "Flaggable" and "Policy" extend it, so that there is only one `getPHID()` declaration.
Test Plan: shrug~
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7408
Summary: Ref T2231. The policy rules are a little murky right now: the "Edit Repository" link requires CAN_EDIT, but the actualy page doesn't. Instead, require CAN_EDIT for the edit page.
Test Plan: As a user without CAN_EDIT, viewed a repository and clicked the edit link.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7406
Summary:
Ref T2231. Allows you to edit the remote URI and credentials.
This is a little bit funky because I'm reusing some of the pages on the new (not-yet-hooked-up) create form. Specifically, it had pages like this:
- Repo Type
- Name/Callsign/Remote
- Auth
- Done
I split "Name/Callsign/Remote" into "Name/Callsign" and "Remote", then when editing the remote I just take you through "Remote" and "Auth" and then back. This lets us reuse the giant pile of protocol/URI sanity checking logic and ends up being pretty clean, although it's a little weird that the "Create" controller does both full-create and edit-remote.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7405
Summary: Ref T2231. Brings "Notify/Publish" and "Autoclose" to the new UI.
Test Plan: See screenshots.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2231
Differential Revision: https://secure.phabricator.com/D7402
Summary: also add a few more words
Test Plan: looks good!
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7404
Summary: See title. Fixes T1809.
Test Plan:
verified each type that has flaggable interface still can be flagged
verified that new custom query filter works
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T1809
Differential Revision: https://secure.phabricator.com/D7392
Summary: Some scripts might find it easier to work with PHIDs instead of user names.
Test Plan:
Use ?assign=<username> and ?assign=<PHID-USER> with the create task URI.
See assignee input being filled correctly.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: epriestley
CC: epriestley, aran, Korvin
Differential Revision: https://secure.phabricator.com/D7401
Summary: First cut of an 'info panel' for phabricator. Basic concept is for display a list of items with a bit more info and depth and an object item list. Projects could be a good first example.
Test Plan: UIExamples
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7398
Summary:
Projects and priority inputs can be prefilled similar to how title
and description fields work.
Prefilling of projects already worked but used PHIDs instead of
more user friendly name so I changed that too.
Test Plan:
Visit [[/maniphest/task/create/?projects=Maniphest;Easy&priority=100&assign=vrana&title=Hip-hip&description=hooray!|example]]
and see prefilled form fields.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7394
Summary:
Fixes T4024.
- Mention FreeBSD by name.
- Make "install this on a normal computer" more explicit.
- Make "install this on a entire domain" more explicit.
Test Plan:
{F74892}
{F74891}
Reviewers: btrahan, chad
Reviewed By: chad
CC: aran
Maniphest Tasks: T4024
Differential Revision: https://secure.phabricator.com/D7397
Summary:
Gets rid of some old Differential-specific nonsense and replaces it with general runtime-pluggable Remarkup rules.
Facebook: This removes two options which may be in use. Have any classes being added via config here just subclass the new abstract bases instead. This should take 5 seconds to fix. You can adjust order by overriding `getPriority()` on the rules, if necessary.
Test Plan: See comments.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, andrewjcg, aran
Differential Revision: https://secure.phabricator.com/D7393
Summary: More Diffusion/Differential touch ups, ToC, etc.
Test Plan: Look at colors, see that they match or look better.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Maniphest Tasks: T3952
Differential Revision: https://secure.phabricator.com/D7386
Summary: Changes to checkmark and crossed circle to match active projects
Test Plan: installed and uninstalled an application. poor conpherence.
Reviewers: epriestley, btrahan
Reviewed By: btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7390
Summary: Makes a white hover icon show on the policy dropdown. Also fixed some spacing. Fixes T4017
Test Plan: hover over the policy dropdown
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T4017
Differential Revision: https://secure.phabricator.com/D7388
Summary:
This code is a little funky right now, and can return `array("error message")` and then try to call `getHunks()` on it. Additionally, each field loads the commit's changes separately.
Instead, load the commit's changes once and cache them, and handle exceptions appropriately.
Test Plan:
- Created a rule like "changed, added, removed content all match /.*/" to force all fields to generate.
- Ran it successfully.
- Faked an error and ran it, got reasonable results.
Reviewers: btrahan
Reviewed By: btrahan
CC: bigo, aran
Differential Revision: https://secure.phabricator.com/D7384
Summary:
Ref T1049. I don't really want to sink too much time into this right now, but a seemingly reasonable architecture came to me in a dream. Here's a high-level overview of how things fit together:
- **"Build"**: In Harbormaster, "build" means any process we want to run against a working copy. It might actually be building an executable, but it might also be running lint, running unit tests, generating documentation, generating symbols, running a deploy, setting up a sandcastle, etc.
- `HarbormasterBuildable`: A "buildable" is some piece of code which build operations can run on. Generally, this is either a Differential diff or a Diffusion commit. The Buildable class just wraps those objects and provides a layer of abstraction. Currently, you can manually create a buildable from a commit. In the future, this will be done automatically.
- `HarbormasterBuildStep`: A "build step" is an individual build operation, like "run lint", "run unit", "build docs", etc. The step defines how to perform the operation (for example, "run unit tests by executing 'arc unit'"). In this diff, this barely exists.
- `HarbormasterBuildPlan`: This glues together build steps into groups or sequences. For example, you might want to "run unit", and then "deploy" if the tests pass. You can create a build plan which says "run step "unit tests", then run step "deploy" on success" or whatever. In the future, these will also contain triggers/conditions ("Automatically run this build plan against every commit") and probably be able to define failure actions ("If this plan fails, send someone an email"). Because build plans will run commands, only administrators can manage them.
- `HarbormasterBuild`: This is the concrete result of running a `BuildPlan` against a `Buildable`. It tracks the build status and collects results, so you can see if the build is running/successful/failed. A `Buildable` may have several `Build`s, because you can execute more than one `BuildPlan` against it. For example, you might have a "documentation" build plan which you run continuously against HEAD, but a "unit" build plan which you want to run against every commit.
- `HarbormasterBuildTarget`: This is the concrete result of running a `BuildStep` against a `Buildable`. These are children of `Build`. A step might be able to produce multiple targets, but generally this is something like "Unit Tests" or "Lint" and has an overall status, so you can see at a glance that unit tests were fine but lint had some issues.
- `HarbormasterBuildItem`: An optional subitem for a target. For lint, this might be an individual file. For unit tests, an individual test. For normal builds, an executable. For deploys, a server. For documentation generation, there might just not be subitems.
- `HarbormasterBuildLog`: Provides extra information, like command/execution transcripts. This is where stdout/stderr will get dumped, and general details and other messages.
- `HarbormasterBuildArtifact`: Stores side effects or results from build steps. For example, something which builds a binary might put the binary in "Files" and then put its PHID here. Unit tests might put coverage information here. Generally, any build step which produces some high-level output object can use this table to record its existence.
This diff implements almost nothing and does nothing useful, but puts most of these object relationships in place. The two major things you can't easily do with these objects are:
1) Run arbitrary cron jobs. Jenkins does this, but it feels tacked on and I don't know of anyone using it for that. We could create fake Buildables to get a similar effect, but if we need to do this I'd rather do it elsewhere in general. Build and cron/service/monitoring feel like pretty different problems to me.
2) Run parameterized/matrix steps (maybe?). Bamboo has this plan/stage/task/job breakdown where a build step can generate a zillion actual jobs, like "build client on x86", "build server on x86", "build client on ARM", "build server on ARM", etc. We can sort of do this by having a Step map to multiple Targets, but I haven't really thought about it too much and it may end up being not-great. I'd guess we have like an 80% chance of getting a clean implementation if/when we get there. I suspect no one actually needs this, or when they do they'll just implement a custom Step and it can be parameterized at that level. I'm not too worried about this overall.
The major difference between this and Jenkins/Bamboo/TravisCI is that all three of those are **plan-centric**: the primary object in the system is a build plan, and the dashboard shows you all your build plans and the current status. I don't think this is the right model. One disadvantage is that you basically end up with top-level messaging that says "Trunk is broken", not "Trunk was broken by commit af32f392f". Harbormaster is **buildable-centric**: the primary object in the system is stuff you can run build operations against (commits/branches/revisions), and actual build plans are secondary. The main view will be "recent commits on this branch, and whether they're good or not" -- which I think is what's most important in a larger/more complex product -- not the pass/fail status of all jobs. This also makes it easier and more natural to integrate with Differential and Diffusion, which both care about the overall status of the commit/revision, not the current status of jobs.
Test Plan: Poked around, but this doesn't really do anything yet.
Reviewers: btrahan
Reviewed By: btrahan
CC: zeeg, chad, aran, seporaitis
Maniphest Tasks: T1049
Differential Revision: https://secure.phabricator.com/D7368
Summary: Ref T4010. Adds a history page and restores the transaction title strings, which previously sort-of existed in the defunct feed story class.
Test Plan: See screenshots.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7371
Summary:
Ref T4010. Projects have a weird proto-version of ApplicationTransactions which is very similar but not quite the same.
Move the storage to a modern format, but keep all the other code for now.
Test Plan: Migrated project transactions; edited projects.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7370
Summary:
Conduit doesn't currently have an analog to "shouldAllowPublic", so the recent policy checks added here caught legitimate Conduit calls when viewing Diffusion as a logged-out user.
Add `shouldAllowPublic()` and set it for all the Diffusion queries.
(More calls probably need this, but we can add it when we hit them.)
Test Plan: Looked at Diffusion as a logged-out user with public access enabled.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7380
Summary: `class_exists()` is case-insensitive, but `PhabricatorApplication::getByClass()` is not.
Test Plan: Fixed unit test to fail, then fixed code to pass unit test.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7379
Summary: This adds back the top border on section headers and cleans up the tab CSS just a hair.
Test Plan: tested files, tasks, and custom field profile.
Reviewers: epriestley, btrahan
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7378
Summary:
Ref T1344. This is //very// rough. Some UI issues:
- Empty states for the board and columns are junky.
- Column widths are crazy. I think we need to set them to fixed-width, since we may have an arbitrarily large number of columns?
- I don't think we have the header UI elements in M10 yet and that mock is pretty old, so I sort of very roughly approximated it.
- What should we do when you click a task title? Popping the whole task in a dialog is possible but needs a bunch of work to actually work. Might need to build "sheets" or something.
- Icons are slightly clipped for some reason.
- All the backend stuff is totally faked.
Generally, my plan is just to use these to implement all of T390. Specifically:
- "Kanban" projects will have "Backlog" on the left. You'll drag them toward the right as you make progress.
- "Milestone" projects will have "No Milestone" on the left, then "Milestone 9", "Milestone 8", etc.
- "Sprint" projects will have "Backlog" on the left, then "Sprint 31", "Sprint 30", etc.
So all of these things end up being pretty much exactly the same, with some minor text changes and new columns showing up on the left vs the right or whatever.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: btrahan
CC: chad, aran, sascha-egerer
Maniphest Tasks: T1344
Differential Revision: https://secure.phabricator.com/D7374
Summary:
While we mostly have reasonable effective object accessibility when you lock a user out of an application, it's primarily enforced at the controller level. Users can still, e.g., load the handles of objects they can't actually see. Instead, lock the queries to the applications so that you can, e.g., never load a revision if you don't have access to Differential.
This has several parts:
- For PolicyAware queries, provide an application class name method.
- If the query specifies a class name and the user doesn't have permission to use it, fail the entire query unconditionally.
- For handles, simplify query construction and count all the PHIDs as "restricted" so we get a UI full of "restricted" instead of "unknown" handles.
Test Plan:
- Added a unit test to verify I got all the class names right.
- Browsed around, logged in/out as a normal user with public policies on and off.
- Browsed around, logged in/out as a restricted user with public policies on and off. With restrictions, saw all traces of restricted apps removed or restricted.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7367
Summary:
Ref T2222. Shrink the API to make it easier to move this object's storage to ApplicationTransactions.
Fixes T3415. This moves the "Summary" and "Test Plan" into the property list, and thereby fixes all the attribution problems associated with commandeering, creating a revision from another user's diff, etc.
Test Plan: Browsed several revisions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3415, T2222
Differential Revision: https://secure.phabricator.com/D7375
Summary: Ref T4010. Adds storage and indexes for custom fields. These tables are the same as people/maniphest/differential.
Test Plan: Ran `bin/storage upgrade`.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4010
Differential Revision: https://secure.phabricator.com/D7369
Summary:
Fixes T3675.
- Maniphest had a couple of old non-event listeners; move them to events.
- Make most of the similar listeners a little more similar.
- Add checks for access to the application.
Test Plan:
- Viewed profile, project, task, revision.
- Clicked all the actions.
- Blocked access to various applications and verified the actions vanished.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3675
Differential Revision: https://secure.phabricator.com/D7365
Summary:
Ref T3675. Some of these listeners shouldn't do their thing if the viewer doesn't have access to an application (for example, users without access to Differential should not be able to "Edit Tasks"). Set the stage for that:
- Introduce `PhabricatorEventListener`, which has an application.
- Populate this for event listeners installed by applications.
- Rename the "PeopleMenu" listeners to "ActionMenu" listeners, which better describes their modern behavior.
This doesn't actually change any behaviors.
Test Plan: Viewed Maniphest, Differntial, People.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3675
Differential Revision: https://secure.phabricator.com/D7364
Summary: Ref T1279. The new stuff seems stable, so stop writes to the old tables.
Test Plan:
- Added and removed reviewers.
- Grepped for `::RELATIONSHIP_TABLE` to verify we really have no more reads.
- Grepped for `::RELATION_REVIEWER`.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T1279
Differential Revision: https://secure.phabricator.com/D7360
Summary:
This is primarily a client request, and a little bit use-case specific, but policies seem to be holding up well and I'm getting more comfortable about maintaining this. Much if it can run through ApplicationTransactions.
Allow the ability to edit status, policies, priorities, assignees and projects of a task to be restricted to some subset of users. Also allow bulk edit to be locked. This affects the editor itself and the edit, view and list interfaces.
Test Plan: As a restricted user, created, edited and commented on tasks. Tried to drag them around.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7357
Summary: Fixes T4001. I broke this some time ago and no one has complained. I don't think it gets much use, and we haven't added it for the newer apps. Just get rid of it rather than adapt the URIs for ApplicationSearch.
Test Plan: Unit tests, sent myself some email.
Reviewers: zeeg, btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T4001
Differential Revision: https://secure.phabricator.com/D7355
Summary: Drop the "Pro" bit.
Test Plan: Created/edited tasks, moved tasks around, generally made a mess. Nothing burned down.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7352
Summary:
We have this commented-out chunk of code now which was originally buggy and is now just nonfunctional.
For now, the core edit types don't always require CAN_EDIT (e.g., subscribe, comment, add edges), except for editing the edit policy itself, which always does. Add a supplemental capability check there and let everything else go through with CAN_VIEW. We can buff the policy checks on application editors over time, they all require appropriate capabilities to get to in the first place anyway.
Test Plan: Created and edited some tasks without getting overwhelmed with policy exceptions.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7351
Summary:
Ref T3569. Two issues:
# Since `sort()` is not stable, instantaneous events (ending on the same second they start) would sometime sort wrong and produce the wrong results. Guarantee they sort correctly.
# Because events can end at any time, there are some additional special cases the algorithm didn't handle properly. Draw a bunch of ASCII art diagrams so these cases work properly.
Test Plan:
- No more fatal when tracking an object for the first time.
- Unit tests.
Reviewers: btrahan
Reviewed By: btrahan
CC: skyronic, aran
Maniphest Tasks: T3569
Differential Revision: https://secure.phabricator.com/D7350
Summary:
Ref T4007. Fixes T4009. Ref T4008.
- Move blurb to a text section.
- Make it render as remarkup.
- Put policy information and status information in header.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T4009, T4007, T4008
Differential Revision: https://secure.phabricator.com/D7373
Summary:
I'll hold this for a couple weeks.
These classes are now only used to render legacy feed stories. I don't plan to migrate the stories since I don't think they're particularly valuable, and migrating them would be complex and time consuming.
With these classes removed, legacy Maniphest feed stories simply vanish from feed.
Test Plan: `grep`, viewed feed, verified it worked but omitted old-style stories.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7114
Summary: Fixes T3898. This feature needs generalization at some point, but just unbreak it for now since a surprising number of users like it.
Test Plan: Pressed "z".
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran, spicyj
Maniphest Tasks: T3898
Differential Revision: https://secure.phabricator.com/D7366
Summary:
Fixes T2146. This is a really simple approach, you just do:
!print .rule {
whatever: blah;
}
And it transforms it into:
.printable .rule {
whatever: blah;
}
@media print {
.rule {
whatever: blah;
}
}
So we end up with these rules twice, but they should compress well and we shouldn't need that many of them, and this fix is way way simpler than all the nonsense I discussed in T2146.
Test Plan:
- Added a unit test.
- Added a simple rule to throw away the menubar when printing.
- Checked the latter with `/?__print__=1`.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T2146
Differential Revision: https://secure.phabricator.com/D7363
Summary:
See screenshots. Some simplifications:
- Tabbed and non-tabbed lists are now allowed to be mixed. We just make the non-tabbed lists permanent and put them on the bottom (e.g., image and audio data in Files).
- You can provide a tab name instead of an entire tab object and we'll build an object for you.
- We respect `setSelected()` on the tab objects now.
Test Plan: See screenshots.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7362
Summary: Make tabs do stuff when you click 'em.
Test Plan:
- Clicked object box tabs in UIExample.
- Viewed some existing non-tab UIs (Differential, Maniphest).
- Viewed some existing non-tab, multiple-list UIs (Diffusion).
- Grepped for methods I changed.
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7361
Summary:
Ref T2222. This implements step (1) described there, which is moving over all the inline comments.
The old and new tables are simliar. The only real trick here is that `transactionPHID` and `legacyCommentID` mean roughly the same thing (`null` if the inline is a draft, non-null if it has been submitted) but we don't have real `transactionPHID`s yet. We just make some up -- we'll backfill them later.
Two risks here:
- I need to take a second look at the keys on this table. I think we need to tweak them a bit, and it will be less disruptive to do that before this migration than after.
- This will take a while for Facebook, and other large installs with tens of thousands of revisions. I'll communicate this.
I'm otherwise pretty satisfied with this, seems to work well and is pretty low risk / non-disruptive.
Test Plan:
- Before migrating, then after migrating:
- Made a bunch of inlines (drafts, submitted).
- Edited and deleted inlines.
- Verified inlines showed up in preview.
- Verified that inlines aren't indexed when they're drafts (`bin/search index D935`).
- Verified that inlines ARE indexed when they're not drafts.
- Verified that drafts inlines make revisions appear as "with draft" in the revision list.
- Made left, right, and draft inlines.
- Migrated (`bin/storage upgrade`).
- Verified that my inlines from before the migration still showed up.
- (Repeated all the stuff above.)
- Manually inspected the inline comment table.
Reviewers: btrahan
Reviewed By: btrahan
CC: FacebookPOC, aran
Maniphest Tasks: T2222
Differential Revision: https://secure.phabricator.com/D7139
Summary: This data was migrated by D6977 and is now obsolete. I'll hold this patch for a week or two in case we get reports of migration errors.
Test Plan: Ran storage upgrade, saw the table vanish. Grepped for references to the table.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D6997
Summary: I touched this code recently but it needs an unusual special case because we call through with the "omnipotent user" from the daemons. As per the TODO below, this will all get cleaned up at some point.
Test Plan: Will make @poop verify.
Reviewers: btrahan, poop
Reviewed By: poop
CC: poop, aran
Differential Revision: https://secure.phabricator.com/D7356
Summary: This capability was replaced with an application-wide "manage" capability. It's checked for just above.
Test Plan: Edited audio!
Reviewers: btrahan, ljalonen, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7353
Summary:
Ref T3569. Fixes T3567. When figuring out how much time has been spent on an object, subtract "preemptive" events which interrupted the object.
Also, make the UI look vaguely sane:
{F72773}
Test Plan: Added a bunch of unit tests, mucked around in the UI.
Reviewers: btrahan
Reviewed By: btrahan
CC: hach-que, skyronic, aran
Maniphest Tasks: T3567, T3569
Differential Revision: https://secure.phabricator.com/D7349
Summary: Believe it or not, I forgot how to create a link in Remarkup.
Test Plan: Clicked on it with selected URL, selected text and without a selection.
Reviewers: chad, epriestley
Reviewed By: epriestley
CC: epriestley, aran, chad
Differential Revision: https://secure.phabricator.com/D7336
Summary: Ref T603. While policies aren't completely perfect, they are substantially functional to the best of my knowledge -- definitely in good enough shape that we want to hear about issues with them, now.
Test Plan: Edited a task, repository, and project.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7343
Summary: Ref T603. If you don't have access to an application, prevent execution of its (authenticated) methods.
Test Plan: Restricted Tokens to only admins, then tried to view/call Token methods as a non-admin.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7342
Summary:
I refactored this recently and accidentally dropped the download URI.
Also fix a warning with, e.g., files named `README`.
Test Plan: Clicked a thumb, clicked "Download", got a file.
Reviewers: chad, btrahan, dctrwatson
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7341
Summary:
Ref T603. Currently, we render handles the user doesn't have permission to see in a manner identical to handles that don't exist. This is confusing, and not required by policies (which restrict content, but permit knowledge that an object exists).
Instead, render them in different styles. Bad/invalid objects look like:
Unknown Object (Task)
Restricted objects look like:
[o] Restricted Task
...where `[o]` is the padlock icon.
Test Plan:
{F71100}
{F71101}
It's possible this renders weird somewhere, but I wasn't immediately able to find any issues. Yell if you see something.
Reviewers: btrahan, chad
Reviewed By: btrahan
CC: chad, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7334
Summary: Makes it easy to choose distinctive icons for projects.
Test Plan:
{F71018}
{F71020}
{F71019}
{F71021}
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7333
Test Plan: Translated 'bold text' as 'txt', clicked on B without selection, saw 'txt'.
CC: epriestley, aran
Differential Revision: https://secure.phabricator.com/D7335
Summary: Various tweaks and fixes. Adds a File Contents view in Diffusion, normalizes spaces, colors.
Test Plan: tested differential and diffusion in my sandbox.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3952
Differential Revision: https://secure.phabricator.com/D7325
Summary: See IRC. Someone got a `null` in CCPHIDs somehow. Moving to subscriptions should prevent this, but paper over it for now.
Test Plan: Will have @dctrwatson check.
Reviewers: btrahan, dctrwatson
Reviewed By: btrahan
CC: dctrwatson, aran
Differential Revision: https://secure.phabricator.com/D7330
Summary: Ref T603. Give countdowns proper UI-level policy controls, and an application-level default policy. Put policy information in the header.
Test Plan:
- Adjusted default policy.
- Created new countdowns.
- Edited countdowns.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7322
Summary: Ref T603. Gives the create/edit interface a policy control, and adds an application-level default.
Test Plan: Created and edited polls.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7321
Summary:
Ref T603. Fixes T2823. This updates Paste and Macro.
- **Paste**
- Added default view policy.
- I didn't add a "create" policy, since I can't come up with any realistic scenario where you'd give users access to pastes but not let them create them.
- **Macro**
- Added a "manage" policy, which covers creating and editing macros. This lets an install only allow "People With An Approved Sense of Humor" or whatever to create macros.
- Removed the "edit" policy, since giving individual users access to specific macros doesn't make much sense to me.
- Changed the view policy to the "most public" policy the install allows.
- Added view policy information to the header.
Also fix a couple of minor things in Maniphest.
Test Plan:
- Set Paste policy, created pastes via web and Conduit, saw they got the right default policies.
- Set Macro policy, tried to create/edit macros with valid and unauthorized users.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T2823, T603
Differential Revision: https://secure.phabricator.com/D7317
Summary: I forgot my veggies last night
Test Plan: n/a
Reviewers: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7324
Summary: Adds filetype icons, applying to differential file headers. The main issue is with all the lightening, I wanted something to still anchor 'new file' on the page and adding a sharp icons does that pretty well for me. Feedback is cool too.
Test Plan: Add some new icons, test in previous commits.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7320
Summary: The "user" and "user/project" sources exclude system agents and disabled users, but should not.
Test Plan: Added system agents to Herald rules.
Reviewers: btrahan, bigo
Reviewed By: bigo
CC: aran
Differential Revision: https://secure.phabricator.com/D7319
Summary: Ref T603. When you aren't allowed to take a top-level action (usually "Create Thing"), visually disable the action.
Test Plan: {F69596}
Reviewers: chad
Reviewed By: chad
CC: chad, aran, asherkin
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7318
Summary: Ref T603. When a user selects "Custom", we pop open the rules dialog and let them create a new rule or edit the existing rule.
Test Plan: Set some objects to have custom policies.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7300
Summary:
Instead of returning a blank result it throws exceptions. Fix this up a
little so we get some consistency with differential
Test Plan:
Loaded a bad phid for releeph, returns empty list.
Try a good phid and get 2 releeph merges.
Reviewers: epriestley, elenaperezrioja, dschleimer, #blessed_reviewers
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7302
Summary:
Ref T603. Several issues here:
1. Currently, `FileQuery` does not actually respect object attachment edges when doing policy checks. Everything else works fine, but this was missing an `array_keys()`.
2. Once that's fixed, we hit a bunch of recursion issues. For example, when loading a User we load the profile picture, and then that loads the User, and that loads the profile picture, etc.
3. Introduce a "Query Workspace", which holds objects we know we've loaded and know we can see but haven't finished filtering and/or attaching data to. This allows subqueries to look up objects instead of querying for them.
- We can probably generalize this a bit to make a few other queries more efficient. Pholio currently has a similar (but less general) "mock cache". However, it's keyed by ID instead of PHID so it's not easy to reuse this right now.
This is a bit complex for the problem being solved, but I think it's the cleanest approach and I believe the primitive will be useful in the future.
Test Plan: Looked at pastes, macros, mocks and projects as a logged-in and logged-out user.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7309
Summary:
Ref T603. This cleans up an existing callsite in the policy filter, and opens up some stuff in the future.
Some policy objects don't have real PHIDs:
PhabricatorTokenGiven
PhabricatorSavedQuery
PhabricatorNamedQuery
PhrequentUserTime
PhabricatorFlag
PhabricatorDaemonLog
PhabricatorConduitMethodCallLog
ConduitAPIMethod
PhabricatorChatLogEvent
PhabricatorChatLogChannel
Although it would be reasonable to add real PHIDs to some of these (like `ChatLogChannel`), it probably doesn't make much sense for others (`DaemonLog`, `MethodCallLog`). Just let them return `null`.
Also remove some duplicate `$id` and `$phid` properties. These are declared on `PhabricatorLiskDAO` and do not need to be redeclared.
Test Plan: Ran the `testEverythingImplemented` unit test, which verifies that all classes conform to the interface.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7306
Summary: Ref T3958. Adds a provider for Mozilla's Persona auth.
Test Plan:
- Created a Persona provider.
- Registered a new account with Persona.
- Logged in with Persona.
- Linked an account with Persona.
- Dissolved an account link with Persona.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T3958
Differential Revision: https://secure.phabricator.com/D7313
Summary:
Ref T603. Although I think the parenthetical is valuable when //setting// policies to make sure no one accidentally opens content up, it's super annoying in headers.
This makes headers say "Public". Everything else still says "Public (No Login Required)".
Test Plan: {F69469}
Reviewers: chad, btrahan
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7310
Summary: Fixes notices, uses standard colors for TODOs. Mutes comments just a hair.
Test Plan: Will test on epriestley. Also Differentail and Diffusion.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3952
Differential Revision: https://secure.phabricator.com/D7311
Summary:
also try to centralize some of the command parsing logic. note that differential is still an exception here. it uses a whitelist-style regex. i think long-term we should have this for every app but changing it seemed too big for this diff.
Fixes T3937.
Test Plan:
echo '!assign btrahan' | ./bin/mail receive-test --as xerxes --to T22 ; echo '!claim' | ./bin/mail receive-test --as xerxes --to T22
unit tests passed, though my new one is silly
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3937
Differential Revision: https://secure.phabricator.com/D7307
Summary: Ref T603. Allow the endpoint to take an existing policy PHID to populate the editor and return a useful datastructure.
Test Plan: In the next revision, actually hooked this up.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7299
Summary:
Ref T603. Make these actually implement policy interfaces, so shared infrastructure (like handle loading) works as expected. They don't actually have meaningful policies, and we short circuit all the checks.
(I don't plan to let you set policy controls on policies themselves)
Test Plan: Loaded handles for Policy objects via common infrastructure.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7298
Summary: Ref T603. Fix/provide some rendering stuff related to custom policies.
Test Plan: After setting stuff to custom policies (made easier by future diffs), looked at the various places strings appear in the UI and saw more sensible ones.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7297
Summary: Ref T603. This is "Allow" in the UI, I just mistyped it when I created the constant.
Test Plan: `grep`
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7296
Summary: Currently, when a dialog is submitted the Workflow itself emits an event but no DOM event is emitted. The workflow event is fine for handlers which only use JS, but there's currently no way for a handler to act more like a normal form handler. This event gives normal form handlers a way to capture Workflow submits and muck around with form contents, etc.
Test Plan: In a future diff, edited policies via a Workflow dialog.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7295
Summary:
Dropdowns have some `span` rules and such currently. Give them class-based rules instead.
(This allows me to add another <span> to menu items later on without it picking up silly styles.)
Test Plan: In a future diff, added menu items with additional <span>s inside them.
Reviewers: btrahan, chad
Reviewed By: chad
CC: chad, aran
Differential Revision: https://secure.phabricator.com/D7294
Summary: Fixes an issue where the user could click a disabled dropdown menu item and get an exception or some other nonsense. Instead, just don't activate anything.
Test Plan: Clicked a disabled header, like "Members of project" in the policy dropdown.
Reviewers: btrahan, va.multimoney, chad
Reviewed By: chad
CC: aran
Differential Revision: https://secure.phabricator.com/D7293
Summary:
Ref T603. Currently, if you're logged out and try to view some object which requires you to be logged in, the login screen is missing the application breadcrumb and just says "Login".
Add the application in context so we get the keys icon.
Test Plan: {F69255}
Reviewers: chad, btrahan, asherkin
Reviewed By: chad
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7303
Summary: Ref T603. Adds code to actually execute custom policies. (There's still no way to select them in the UI.)
Test Plan:
- Added and executed unit tests.
- Edited policies in existing applications.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7292
Summary: Fixes T3950. This centers the images, adds a thin blue border, and a transparent background.
Test Plan: Tested a file in Files, Diffusion, and Macro.
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3950
Differential Revision: https://secure.phabricator.com/D7305
Summary: This adds some controllable space between paths in Diffusion headers. Fixes T3951
Test Plan: Tested new links in diffusion.
Reviewers: epriestley
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Maniphest Tasks: T3951
Differential Revision: https://secure.phabricator.com/D7304
Summary: A set of random icons for use as project identifiers. 42, white.
Test Plan: photoshop, epriestley
Reviewers: epriestley, btrahan
Reviewed By: epriestley
CC: Korvin, epriestley, aran
Differential Revision: https://secure.phabricator.com/D7290
Summary: See comment; see IRC. This didn't cause anything bad, but ended up with `document.body.id == "null"` in Firefox, which is a bit weird.
Test Plan: Loaded page, put `document.body.null` into the console, got consistent results.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7288
Summary: If we hit an exception very early, the request may not have a user yet. Don't assume it will.
Test Plan: Broke MySQL config on purpose to test some stuff, loaded Phabricator, got a nice error page instead of a super-fatal one.
Reviewers: btrahan
Reviewed By: btrahan
CC: aran
Differential Revision: https://secure.phabricator.com/D7286
Summary: Ref T603. Make this a little easier to use by highlighting the current value.
Test Plan: See screenshot.
Reviewers: chad, btrahan
Reviewed By: chad
CC: chad, aran
Maniphest Tasks: T603
Differential Revision: https://secure.phabricator.com/D7289
