Summary:
Fixes T9994. Currently, when Drydock can't allocate a new resource because some limit has been reached, it waits patiently for a resource to become available.
It is possible that no resource will ever become available. Particularly with "Working Copy" resources, the new lease may want a copy of `rB`, but the resource may already be maxed out on `rA`.
Right now, no process exists to automatically reclaim the unused `rA`.
When we encounter this situation, try to reclaim one of the other resources if it is just sitting there unused.
Specifically:
- Add a "reclaim" command which means "release this resource //if// it is completely unused".
- Add a `bin/drydock reclaim` to send this command to every active resource.
- When we try to acquire a resource and can't, but only because of some kind of limit / utilization problem, try to release an unused resource to free up some room.
Test Plan:
- Set "Working Copy" resource limit to 1.
- Ran "Test Configuration" in `rA`, which worked.
- Ran "Test Configuration" in `rB`, which hung forever.
- Applied patch.
- Ran "Test Configuration" in `rB`, saw it reclaim the `rA` resource, use the slot, then succeed.
- Ran "Test Configuration" in `rA` again, saw it grab the slot back.
- Ran `bin/drydock reclaim` and saw it reclaim a bunch of old orphaned resources.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9994
Differential Revision: https://secure.phabricator.com/D14819
Summary:
Ref T9994. This fixes the first issue discussed on that task, which is that when a merge fails after "arc land", we would not clean up all the leases properly.
Specifically, when a merge fails, we use `queueTask()` to schedule a followup task. This followup destroys the lease and frees the underlying resource.
However, the default behavior of `queueTask()` is to //not queue tasks// if the parent task fails. This is a reasonable, safe behavior that was originally introduced in D8774, where it kept us from sending too much mail if a task did "send some mail" and then failed a little later on and got retried.
Since I think the default behavior is correct, I just special cased the behavior for Drydock to make it queue even on failure. These are the only types of followup tasks we currently want to queue on main task failure.
(It's possible that future Blueprints might want some kind of more specialized behavior, where some tasks queue only on success, but we can cross that bridge when we come to it.)
Test Plan:
- See T9994#149878 for test case setup.
- I ran that test case again with this patch, and saw the followup task queue properly in the `--trace` log, a correspoinding update task show up in `/daemon/`, and the lease get destroyed when I ran it a moment later.
{F1029915}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9994
Differential Revision: https://secure.phabricator.com/D14818
Summary: Ref T10003. Give installs more warning about these changes.
Test Plan: Changed configuration, saw warning. Reset configuration, no warning.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10003
Differential Revision: https://secure.phabricator.com/D14817
Summary: Ref T10004. Happy to take another approach here or just not bother, this just struck me as a little ambiguous/confusing.
Test Plan:
Before, not necessarily clear that the "Create Task" header only applies to the first few items.
{F1029126}
After, more clear:
{F1029127}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14815
Summary:
At least for now, the "Space" field is just a subfield of the "Visible To" field, so:
- it doesn't get any separate settings; and
- it always uses the "Visible To" settings.
Test Plan:
- Created a form with a hidden view policy field.
- Created stuff with no "you must pick a space" errors.
- Created stuff with a normal form.
- Prefilled "Space" on a noraml form.
- Verified that trying to prefill "Space" on a form with "Visible To" hidden does nothing.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14812
Summary:
Ref T10004. Fixes T9527. Currently, we render two kinds of bad policy/space transactions during object creation.
First, we render a transaction showing a change from the default policy/space to the selected policy/space:
> alice shifted this object from space S1 Default to space S2 Secret.
This is a //good transaction// (it's showing that the default was changed, which could be important for policy stuff!) but it's confusing because it makes it sound like the object briefly existed in space S1, when it did not.
Instead, render this:
> alice created this object in space S2 Secret.
This retains the value (show that the object was created in an unusual space) without the confusion.
Second, when you create a "New Bug Report", we render a transaction like this:
> alice changed the visibility of this task from "All Users" to "Community".
This is distracting and not useful, becasue it's a locked default of the form. This was essentially fixed by D14810. The new behavior is to show this, //only// if the value was changed from the form value:
> alice created this object with visibility "Administrators".
This should reduce confusion, reduce fluff in the default cases, and do a better job of calling out important changes (basically, unusual spaces/policies).
Test Plan:
- Created an edit form with a default space and policies.
- Used that form to create task with:
- same values as form;
- different values from form.
When I changed the form value, I got transactions. When I left it the same, I didn't.
The transactions rendered in the non-confusing "created with ..." variant.
Editing the values created normal transactions with "changed policy from X to Y".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9527, T10004
Differential Revision: https://secure.phabricator.com/D14811
Summary:
Fixes T7661. Ref T9527.
When you create a task, especially with an EditEngine form, you currently get more noise than is useful. For example:
> alice created this task.
> alice changed the edit policy from "All Users" to "Community (Project)".
> alice added projects: Feature Request, Differential.
> alice added a subscriber: alice.
Transaction (1) is a little useful, since it saves us from a weird empty state and shows the object creation time.
Transaction (2) is totally useless (and even misleading) because that's the default policy for the form.
Transaction (3) isn't //completely// useless but isn't very interesting, and probably not worth the real-estate.
Transaction (4) is totally useless.
(These transactions are uniquely useless when creating objects -- when editing them later, they're fine.)
This adds two new rules to hide transactions:
- Hide transactions from object creation if the old value is empty (e.g., set title, set projects, set subscribers).
- Hide transactions from object creation if the old value is the same as the form default value (e.g., set policy to default, set priorities to default, set status to default).
NOTE: These rules also hide the "created this object" transaction, since it's really one of those transaction types in all cases. I want to keep that around in the long term, but just have it be a separate `TYPE_CREATE` action -- currently, it is this weird, inconsistent action where we pick some required field (like title) and special-case the rendering if the old value is `null`. So fixing that is a bit more involved. For now, I'm just dropping these transactions completely, but intend to restore them later.
Test Plan:
- Created objects.
- Usually saw no extra create transactions.
- Saw extra create transactions when making an important change away from form defaults (e.g., overriding form policy).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7661, T9527
Differential Revision: https://secure.phabricator.com/D14810
Summary:
Ref T10004. Tweaks some of the UX a little to be more intuitive/inviting?
- Button says "Configure Form" instead of "Actions".
- Root list is less "developer-ey" and more "explain what this is for-ey".
Test Plan:
{F1028928}
{F1028929}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14808
Summary:
Ref T10004. Currently, when a logged-out user visits an application like Maniphest, we show them a disabled "Create Task" button with no dropdown menu.
This is technically correct in some sense because none of the items in the menu will work, but we can be more helpful and show the items, just in a disabled state:
{F1028903}
When the user clicks these, they'll be pushed through the login flow and (after D14804) end up on the same page they were on when they selected the item. From here, they can proceed normally.
I changed "...to continue." to "...to take this action." to hopefully be a little more clear. In particular, we do not //continue// the action after you log in: you end up back on the same page you started on. For example, if you clicked "Create New Bug" from the list view, you end up back on the list view and need to click "Create New Bug" again. If you clicked "Edit Task" from some task detail page, you end up on the task detail page and have to click "Edit Task" again.
I think this behavior is always very good. I think it is often the best possible behavior: for actions like "Edit Blocking Tasks" and "Merge Duplicates In", the alternatives I can see are:
- Send user back to task page (best?)
- Send user to standalone page with weird dialog on it and no context (underlying problem behavior all of this is tackling, clearly not good)
- Send user back to task page, but with dialog open (very complicated, seems kind of confusing/undesirable?)
For actions like "Create New Bug" or "Edit Task", we have slightly better options:
- Send user back to task page (very good?)
- Send user to edit/create page (slightly better?)
However, we have no way to tell if a Workflow "makes sense" to complete in a standalone way. That is, we can't automatically determine which workflows are like "Edit Task" and which workflows are like "Merge Duplicates In".
Even within an action, this distinction is not straightforward. For example, "Create Task" can standalone from the Maniphest list view, but should not from a Workboard. "Edit Task" can standalone from the task detail page, but should not from an "Edit" pencil action on a list or a workboard.
Since the simpler behavior is easy, very good in all cases, often the best behavior, and never (I think?) confusing or misleading, I don't plan to puruse the "bring you back to the page, with the dialog open" behavior at any point. I'm theoretically open to discussion here if you REALLY want the dialogs to pop open magically but I think it's probably a lot of work.
Test Plan: As a logged out user, clicked "Create Task". Got a dropdown showing the options available to me if I log in. Clicked one, logged in, ended up in a reasonable place (the task list page where I'd started).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14806
Summary:
Ref T10004. After D14804, we get this behavior by default and no longer need to set it explicitly.
(If some endpoint did eventually need to set it explicitly, it could just change what it passes to `setHref()`, but I believe we currently have no such endpoints and do not foresee ever having any.)
Test Plan:
- As a logged out user, clicked various links in Differential, Maniphest, Files, etc., always got redirected to a sensible place after login.
- Grepped for `setObjectURI()`, `getObjectURI()` (there are a few remaining callsites, but to a different method with the same name in Doorkeeper).
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14805
Summary:
Ref T10004. After a user logs in, we send them to the "next" URI cookie if there is one, but currently don't always do a very good job of selecting a "next" URI, especially if they tried to do something with a dialog before being asked to log in.
In particular, if a logged-out user clicks an action like "Edit Blocking Tasks" on a Maniphest task, the default behavior is to send them to the standalone page for that dialog after they log in. This can be pretty confusing.
See T2691 and D6416 for earlier efforts here. At that time, we added a mechanism to //manually// override the default behavior, and fixed the most common links. This worked, but I'd like to fix the //default// beahvior so we don't need to remember to `setObjectURI()` correctly all over the place.
ApplicationEditor has also introduced new cases which are more difficult to get right. While we could get them right by using the override and being careful about things, this also motivates fixing the default behavior.
Finally, we have better tools for fixing the default behavior now than we did in 2013.
Instead of using manual overrides, have JS include an "X-Phabricator-Via" header in Ajax requests. This is basically like a referrer header, and will contain the page the user's browser is on.
In essentially every case, this should be a very good place (and often the best place) to send them after login. For all pages currently using `setObjectURI()`, it should produce the same behavior by default.
I'll remove the `setObjectURI()` mechanism in the next diff.
Test Plan: Clicked various workflow actions while logged out, saw "next" get set to a reasonable value, was redirected to a sensible, non-confusing page after login (the page with whatever button I clicked on it).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10004
Differential Revision: https://secure.phabricator.com/D14804
Summary: This seems to work, but I couldn't figure out how to pass over a Caption for a text field.
Test Plan: New blog, Edit blog.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14770
Summary:
Ref T9992. This is a step on the path to getting EditEngine working in Badges, Projects and Calendar.
This doesn't add a new `EditField` for icons yet, just standardizes the old stuff. New stuff is more general and I saved 150 lines of code.
I put the endpoint in Files because the similar "choose a profile picture" endpoint will definitely go there, and this endpoint might eventually feature, like, "draw your own icon~~" or something.
Test Plan:
- Created events, projects and badges with custom icons.
- Edited events, projects and badges, changing their icons.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9992
Differential Revision: https://secure.phabricator.com/D14799
Summary: Ref T9964. Create some docuemntation for this stuff, and clean up the *.edit endpoints a bit.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14798
Summary:
Ref T9964. Three goals here:
- Make it easier to supply Conduit documentation.
- Make automatic documentation for `*.edit` endpoints more complete, particularly for custom fields.
- Allow type resolution via Conduit types, so you can pass `["alincoln"]` to "subscribers" instead of needing to use PHIDs.
Test Plan:
- Viewed and used all search and edit endpoints, including custom fields.
- Used parameter type resolution to set subscribers to user "dog" instead of "PHID-USER-whatever".
- Viewed HTTP parameter documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14796
Summary:
See T9905#148799. The CommentEditField generated empty comment transactions; these are dropped later, but before they are dropped they would trigger implicit CCs.
The implicit CC rule should probably be narrower, but we shouldn't be generating these transactions in the first place.
Test Plan: No longer implicitly CC'd on a task when doing something minor like changing projects.
Reviewers: chad
Reviewed By: chad
Subscribers: avivey
Differential Revision: https://secure.phabricator.com/D14795
Summary:
Ref T9964.
- New mechanism for rich documentation on unusual/complicated edits.
- Add some docs to `paths.set` since it's not self-evident what you're supposed to pass in.
Test Plan: {F1027177}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14791
Summary: Ref T9964. Fixes T9752. Provides API access to enable/disable packages and change their paths.
Test Plan:
- Changed status via Conduit.
- Changed paths via Conduit.
- Tried to change a path use a nonsense/bogus repository PHID, got an error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9752, T9964
Differential Revision: https://secure.phabricator.com/D14790
Summary:
Ref T9908. Fixes T6205.
This is largely some refactoring to improve the code. The new structure is:
- Each EditField has zero or one "submit" (normal edit form) controls.
- Each EditField has zero or one "comment" (stacked actions) controls.
- If we want more than one in the future, we'd just add two fields.
- Each EditField can have multiple EditTypes which provide Conduit transactions.
- EditTypes are now lower-level and less involved on the Submit/Comment pathways.
Test Plan:
- Added and removed projects and subscribers.
- Changed task statuses.
- In two windows: added some subscribers in one, removed different ones in the other. The changes did not conflict.
- Applied changes via Conduit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6205, T9908
Differential Revision: https://secure.phabricator.com/D14789
Summary:
Fixes T9997. This was in the database since v0, I just never hooked up the UI since it wasn't previously meaningful.
However, it now makes sense to have a provider like Asana with login disabled and use it only for integrations.
Test Plan: Disabled login on a provider, verified it was no longer available for login/registration but still linkable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9997
Differential Revision: https://secure.phabricator.com/D14794
Summary:
Fixes T9995. I think letting users customize slugs is not a hugely compelling as a product feature, and this fixes the issue with slugs that have "/" characters in them and makes the move to EditEngine easier since I don't have to deal with the weird JS thing.
Instead, just generate slugs automatically. No more JS, no more separate field, things automatically update if you rename a blog, and now that URIs have IDs in them the old URI will still work after a rename.
Test Plan:
- Applied migration.
- Created new posts.
- Edited existing posts.
- Visited various posts.
- Created a post with a bunch of "/" in the title, things still worked fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9995
Differential Revision: https://secure.phabricator.com/D14792
Summary: Ref T9964. Add a `setIsConduitOnly()` method so we can mark a field as API-only.
Test Plan:
- Created and edited pastes via web UI (no status field).
- Adjusted status via web UI action.
- Adjusted status via Conduit API.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14788
Summary: Fixes T9988. This logic got inverted by accident at some point.
Test Plan:
- Edited a task, shifting spaces.
- Created a task in default space.
- Created a task in custom space.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9988
Differential Revision: https://secure.phabricator.com/D14787
Summary: Ref T9983. This method is spelled wrong.
Test Plan: Hit this case, got a dialog instead of a fatal.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9983
Differential Revision: https://secure.phabricator.com/D14786
Summary:
Fixes T9984. When a tokenizer only allows one selection (like "Task Owner:" or "Land Onto Branch:"), keep the browse button active but have it //replace// values.
Also, have "Create Subtask" default to the system default status, so subtasks of closed tasks are not also closed.
Test Plan:
- Browsed an empty limit=1 tokenizer.
- Replaced a full limit=1 tokenizer.
- Browsed an empty no-limit tokenizer.
- Browsed more tokens into the no-limit tokenizer.
- Typed some tokens normally.
- Created a subtask of a closed task.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9984
Differential Revision: https://secure.phabricator.com/D14785
Summary:
Ref T9980. No magic here, just write a little bit about how to find outdated callers. Update the technical doc.
Also:
- Fix an unrelated bug where you couldn't leave comments if an object had missing, required, custom fields.
- Restore the ConduitConnectionLog table so `bin/storage adjust` doesn't complain.
Test Plan: Read docs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9980
Differential Revision: https://secure.phabricator.com/D14784
Summary:
Ref T9908. These meta-edit-engines are used to generate the main editengine UIs, but they're also editable.
Fix an exception when trying to edit the meta editengine.
Test Plan: Edited editengineconfiguration editengine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14783
Summary:
Ref T9980. By default, show the viewer //their// calls.
Make it easy to find their own deprecated calls.
I don't like the word "My" but couldn't come up with anything better that didn't feel like a big loss of clarity.
The permissions on this log are also a little weird: non-admins can see everyone else's calls.
I think we should eventually lock that down, but plan to keep it this way for now:
First, a lot of your calls end up with no caller set right now, because we don't set the caller early enough in the process so a lot differnet types of errors can leave us with no user on the log. Fixing that isn't trivial, and users may reasonably want to access to these "no caller" logs to check for errors or debug stuff.
Second, none of it is really that sensitive?
Third, it's reasonable for users to want to look at bots?
I'd plan to maybe do this eventually:
- Make the caller get populated more often after auth code is simplified.
- Only let users look at their calls and maybe bot calls and anonymous calls.
- Let admins look at everything.
But for now everyone can see everything.
Test Plan: {F1025867}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9980
Differential Revision: https://secure.phabricator.com/D14782
Summary: Ref T9980. This makes it much easier to look for calls to deprecated methods.
Test Plan: {F1025851}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9980
Differential Revision: https://secure.phabricator.com/D14781
Summary:
Ref T5955, T9980, T9982.
We currently store two types of Conduit logs: //connection// logs and //method// logs.
Originally, Conduit worked like web logins: you'd call `conduit.connect` and then get a session back. This approach still works, but new clients don't use it and it will probably stop working eventually after T5955 is further along.
There was no real reason for things to work like this and no other API in the world does, I think it was just slightly easier to implement back in 2011.
This table was used to group up related calls in a UI long ago, I think, but that got deleted at some point. In any case, it serves no purpose in modern Phabricator.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5955, T9980, T9982
Differential Revision: https://secure.phabricator.com/D14780
Summary:
Ref T9980. Start making this UI more useful and powerful so we can give administrators a better toolset for reacting to API changes.
Fixes T9755. We were logging the caller, just not rendering it properly.
Test Plan: {F1025799}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9755, T9980
Differential Revision: https://secure.phabricator.com/D14779
Summary: Ref T9980. I don't think this is actually useful, and plan to give users and administrators more powerful tools instead.
Test Plan: Loaded setup warnings.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9980
Differential Revision: https://secure.phabricator.com/D14778
Summary: Ref T9964. Priorities and statuses have metadata (colors, names, etc) which we can reasonably just return from API callers. This is so ligthweight that I think it doesn't really make sense to put in an attachment. We also use this information in `arc tasks`.
Test Plan: Called API, got sensible looking status and priority data back.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14777
Summary: Ref T9964. This just adds more structure to application fields, to make it harder to make typos and easier to validate them later.
Test Plan: Viewed APIs, called some APIs, saw good documentation and correct results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14776
Summary:
Ref T9964.
- Add a "paths" attachment for fetching paths.
- Always load owners. We will need this to do policy checks in the future, anyway, and this data is not large, is very useful, and is reasonable to load unconditionally.
Test Plan:
- Queried packages via API.
- Edited packages (paths, owners).
- Created a package.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14775
Summary: Ref T9964. Builds on D14772. Allows callers to get the raw content of pastes as an attachment.
Test Plan:
- Read docs.
- Executed attachment query.
- Saw raw paste content.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14774
Summary: Ref T9964. Builds on D14772. Allows callers to request project PHIDs for objects.
Test Plan: {F1025468}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14773
Summary:
Ref T9964. We have various kinds of secondary data on objects (like subscribers, projects, paste content, Owners paths, file attachments, etc) which is somewhat slow, or somewhat large, or both.
Some approaches to handling this in the API include:
- Always return all of it (very easy, but slow).
- Require users to make separate API calls to get each piece of data (very simple, but inefficient and really cumbersome to use).
- Implement a hierarchical query language like GraphQL (powerful, but very complex).
- Kind of mix-and-match a half-power query language and some extra calls? (fairly simple, not too terrible?)
We currently mix-and-match internally, with `->needStuff(true)`. This is not a general-purpose, full-power graph query language like GraphQL, and it occasionally does limit us.
For example, there is no way to do this sort of thing:
$conpherence_thread_query = id(new ConpherenceThreadQuery())
->setViewer($viewer)
// ...
->setNeedMessages(true)
->setWhenYouLoadTheMessagesTheyNeedProfilePictures(true);
However, we almost never actually need to do this and when we do want to do it we usually don't //really// want to do it, so I don't think this is a major limit to the practical power of the system for the kinds of things we really want to do with it.
Put another way, we have a lot of 1-level hierarchical queries (get pictures or repositories or projects or files or content for these objects) but few-to-no 2+ level queries (get files for these objects, then get all the projects for those files).
So even though 1-level hierarchies are not a beautiful, general-purpose, fully-abstract system, they've worked well so far in practice and I'm comfortable moving forward with them in the API.
If we do need N-level queries in the future, there is no technical reason we can't put GraphQL (or something similar) on top of this eventually, and this would represent a solid step toward that. However, I suspect we'll never need them.
Upshot: I'm pretty happy with "->needX()" for all practical purposes, so this is just adding a way to say "->needX()" to the API.
Specifically, you say:
```
{
"attachments": {
"subscribers": true,
}
}
```
...and get back subscriber data. In the future (or for certain attachments), `true` might become a dictionary of extra parameters, if necessary, and could do so without breaking the API.
Test Plan:
- Ran queries to get attachments.
{F1025449}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14772
Summary:
Ref T9964. I added several hacks to get these working. Clean them up and pull this into a proper extension.
The behavior in the web UI is:
- they work in all applications; but
- they only show up in the UI if a value is specified.
So if you visit `/view/?ids=1,2` you get the field, but normally it's not present. We could refine this later. I'm going to add documentation about how to prefill these forms regardless, which should make this discoverable by reading the documentation.
There's one teensey weensey hack: in the API, I push these fields to the top of the table. That one feels OK, since it's purely a convenience/display adjustment.
Test Plan: Queried by IDs, reviewed docs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14769
Summary:
Ref T9964. Building tables in Remarkup is kind of neat-ish but ends up feeling kind of hacky, and requires weird workarounds if any of the values have `|` in them.
Switch to normal elements instead.
Also move the magic "ids" and "phids" to be more like real fields. I'll clean this up fully in a diff or two, it's just a little tricky because Maniphest has an "ids" field.
Test Plan: {F1024294}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14768
Summary: Ref T9964. I left a couple of these unsupported for now since they're weird in some way.
Test Plan: {F1024031}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14767
Summary:
Ref T9964. Fill in more parameter types and descriptions.
(No date support yet since it's a bit more involved.)
Test Plan: {F1024022}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14766
Summary: Ref T9964. This fills in types and descriptions for ApplicationSearch fields in Paste.
Test Plan:
Got this nice table now:
{F1023999}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14765
Summary:
Ref T9964. ApplicationSearch currently has a bunch of hard-coded `if ($object instanceof thing)` stuff.
Pull that out so it can live in extensions.
Test Plan:
- Searched by spaces, subscribers, projects.
{F1023921}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14764
Summary:
Ref T9964. I want to show users what we're expecting in "constraints", and let constraints like "authors=epriestley" work to make things easier.
I'm generally very happy with the "HTTPParameterType" stuff from EditEngine, so add a parallel set of "ConduitParameterType" classes. These are a little simpler than the HTTP ones, but have a little more validation logic.
Test Plan:
This is really just a proof of concept; some of these fields are now filled in:
{F1023845}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14763
Summary:
Ref T9964. The new `*.search` and `*.edit` methods generate documentation which depends on the viewer.
For example, the `*.search` methods show a reference table of the keys for all your saved queries.
Give them a real viewer to work with.
During normal execution, just populate this viewer with the request's viewer, so `$request->getViewer()` and `$this->getViewer()` both work and mean the same thing.
Test Plan: {F1023780}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14761
Summary: Ref T9964. This is a basic implementation of the new "maniphest.search" endpoint.
Test Plan: Clicked the button in the web UI, got meaningful results back.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14760
Summary:
Ref T9964. Adds a new-style "owners.search" endpoint, and an extension for customfields.
Puts enough indirection in place to give us nice, consistent "custom.key" user-facing keys instead of "std:custom:owners:na0shf9a8dfdsafl" junk.
Test Plan:
- Searched Owners via API.
- Searched by ID.
- Ordered by custom fields.
- Reviewed API docs.
- Used normal search with ordering.
- Viewed custom field values in search results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9964
Differential Revision: https://secure.phabricator.com/D14758
Summary: Adds a list of your drafts. Fixes T9927y
Test Plan:
Load up home, see my drafts. Fake 0 drafts, see fallback message.
{F1023139}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14756
Summary:
Ref T9360. Fixes the double-rendering of post bodies in feed stories.
Downside is that 'publish' (on its own) no longer shows a body, but that seems fine.
Test Plan:
- Got some double bodies.
- Applied patch.
- No more double bodies.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D14748
Summary: Ref T9968. Some of the crumb/route handling wasn't quite tight enough and could hit a fatal.
Test Plan: Hit previously-fataling URI, got a 404 instead.
Reviewers: chad
Reviewed By: chad
Subscribers: starruler
Maniphest Tasks: T9968
Differential Revision: https://secure.phabricator.com/D14747
Summary: Ref T9927. Adds a "Blogs" section to PhameHome. Removes "New Post" Controller. Adds flipped layout for PHUITwoColumnView
Test Plan:
Test PhameHome, Ponder, New Post, etc. Mobile and Desktop states.
{F1022080}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: johnny-bit, Korvin
Maniphest Tasks: T9927
Differential Revision: https://secure.phabricator.com/D14744
Summary: Fixes T9966. In this unusual, difficult-to-reach case, we throw `Exception` (which has no censoring) instead of `CommandException` (which has censoring). Throw `CommandException` instead.
Test Plan:
- Hacked up a bunch of stuff in order to hit this: disabled origin validation, origin correction, and pointed repository at a bad domain.
- Verified message is now censored correctly.
{F1022217}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9966
Differential Revision: https://secure.phabricator.com/D14745
Summary:
Ref T9964. See that task for some context and discussion.
Ref T7715, which has the bigger picture here.
Basically, I want Conduit read endpoints to be full-power, ApplicationSearch-driven endpoints, so that applications can:
- Write one EditEngine and get web + conduit writes for free.
- Write one SearchEngine and get web + conduit reads for free.
I previously made some steps toward this, but this puts more of the structure in place.
Test Plan:
Viewed API console endpoint and read 20 pages of docs:
{F1021961}
Made various calls: with query keys, constraints, pagination, and limits.
Viewed new {nav Config > Modules} page.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7715, T9964
Differential Revision: https://secure.phabricator.com/D14743
Summary: Ref T9897. If you visit `/post/123/spoderman/` it will try to redirect you to `/post/123/spiderman/`, but currently only internal views work because these redirects aren't marked as safe/external.
Test Plan: Visited a misspelled/out-of-date URI on an external blog view, got a good redirect.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D14741
Summary:
Ref T9897. Purge a bunch of stuff:
- Remove skins.
- Remove all custom sites for skin resources.
- Remove "framed", "notlive", "preview", separate "live" controllers (see below).
- Merge "publish" and "unpublish" controllers into one.
New behavior:
- Blogs and posts have three views:
- "View": Internal view URI, which is a normal detail page.
- "Internal Live": Internal view URI which is a little prettier.
- "External Live": External view URI for an external domain.
Right now, the differences are pretty minor (basically, different crumbs/chrome). This mostly gives us room to put some milder flavor of skins back later (photography or more "presentation" elements, for example).
This removes 9 million lines of code so I probably missed a couple of things, but I think it's like 95% of the way there.
Test Plan:
Here are some examples of what the "view", "internal" and "external" views look like for blogs (posts are similar):
"View": Unchanged
{F1021634}
"Internal": No chrome or footer. Still write actions (edit, post commments). Has crumbs to get back into Phame.
{F1021635}
"External": No chrome or footer. No write actions. No Phabricator crumbs. No policy/status information.
{F1021638}
I figure we'll probably tweak these a bit to figure out what makes sense (like: maybe no actions on "internal, live"? and "external, live" probably needs a way to set a root "Company >" crumb?) but that they're reasonable-ish as a first cut?
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D14740
Summary:
Ref T9952. Ref T3462. After D14736, if we have information about the target/"onto" branch, use it in the UI:
- Show "feature (branched from master)" instead of "feature".
- Default "Land Revision" to hit the correct branch.
Test Plan:
- Branched from `test` with branch tracking.
- Diffed.
- Saw "feature (branched from test)" in UI.
- Saw "test" fill as default in "Land Revision", despite the repository having a different default branch.
{F1020587}
{F1020588}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T3462, T9952
Differential Revision: https://secure.phabricator.com/D14737
Summary:
Ref T9952. Default the branch target in the dialog to be whatever branch is the default branch for the repository.
This will be correct for repositories like ours (which land everything into `master`) and correct most of the time for repositories which have some other "primary" branch (maybe `development`).
It won't be great if there are multiple open lines of development in a repository (for example, some changes go to `newdesignpro` and some changes go to `legacy-1.2`). I'll do work in T3462 next to improve those cases so we can pick a better default.
Test Plan:
- Saw dialog default to "master".
- Changed repo default branch, saw it default to "notmaster" instead.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9952
Differential Revision: https://secure.phabricator.com/D14734
Summary:
Ref T9952. This adds a typeahead so you can pick a branch to target.
It does not choose a default branch, the user must pick a branch explicitly.
Test Plan:
- Landed rGITTESTd587fada48fc to `master` (by typing "master").
- Landed rGITTEST86c339b2ef01 to `notmaster` (by typing "notmaster").
{F1020531}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9952
Differential Revision: https://secure.phabricator.com/D14733
Summary: Ref T9952. This will let me put a "Branch: [____]" control on the "Land Revision" dialog so users can choose a branch to target.
Test Plan: Used `/typeahead/class/` to vet basic behavior.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9952
Differential Revision: https://secure.phabricator.com/D14732
Summary: Ref T9952. See discussion there. This change is primarily aimed at letting me build a typeahead of branches in a repository so that we can land to arbitrary branches a few diffs from now.
Test Plan:
- Ran migrations.
- Verified database populated properly with PHIDs (`SELECT * FROM repository_refcursor;`).
- Ran `bin/repository update`.
- Viewed a Git repository in Diffusion.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9952
Differential Revision: https://secure.phabricator.com/D14731
Summary: If you archive a badge, remove it's presence in the main Phabricator UI. These are still accessible from `/badges/` for properity. Ref T9944
Test Plan: Archive a badge, weep uncontrollably.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9944
Differential Revision: https://secure.phabricator.com/D14730
Summary:
Fixes T9945. This is straightforward.
The two sub-object types are very lightweight so I just deleted them directly instead of loading + delete()'ing (or implementing DestructibleInterface on them, which would require they have PHIDs).
Also improve a US English localization.
Test Plan:
- Used `bin/remove destroy PHID-... --trace` to destroy a package.
- Verified it was gone.
- Inspected the SQL in the log for general reasonableness.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9945
Differential Revision: https://secure.phabricator.com/D14729
Summary: Allows closing a mock from the action list. Ref T9414
Test Plan: New Mock, Edit Mock, Close Mock, Open Mock
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9414
Differential Revision: https://secure.phabricator.com/D14726
Summary: Makes this more consistent. Also clean up spacing. Ref T9414
Test Plan: Archive/Activate Paste, Edit Paste
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9414
Differential Revision: https://secure.phabricator.com/D14724
Summary: Fixes T9941. I think someone from Perforce emailed us about 10 years ago and I added this link in response, but I haven't seen other interest in Perforce since then. Link is now dead.
Test Plan:
- {nav Diffusion > Create Repository > Import Existing}, no more Perforce link.
- Grepped for `perforce`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9941
Differential Revision: https://secure.phabricator.com/D14720
Summary:
Ref T9132. I think the featureset is approximatley stable, so here's some documentation.
I also cleaned up a handful of things in the UI and tried to make them more obvious or more consistent.
Test Plan: Read documentation.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14718
Summary: Fixes T9851. I'll hold this for a while to give users some time to update per T9860.
Test Plan:
Edited a task via:
- Conduit
- Comments field
- Edit form
- New task form
Reviewers: chad
Reviewed By: chad
Subscribers: Krenair
Maniphest Tasks: T9851
Differential Revision: https://secure.phabricator.com/D14576
Summary: Ref T9908. Move all the "pro" stuff into the old locations.
Test Plan: Created/edited tasks, looked at URIs, saw non-pro ones. Grepped for `editpro`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14717
Summary:
Ref T9908. No more callsites. Also:
- Phurl a couple of documentation URIs.
- Get rid of "task:" in the global search since it doesn't really make sense anymore.
Test Plan: `grep`, edited/created tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14716
Summary: Ref T9908. This is the last of the things that need to swap over.
Test Plan:
- Created tasks from a workboard.
- Created tasks in different columns.
- Edited tasks.
- Used `?parent=..`.
- Verified that default edit form config now affects comment actions.
- No more weird comment thing on forms, at least for now.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14715
Summary: Ref T9908. This drives workboard card edits through the new stuff. Bit of copy-paste but the old one will get deleted soon.
Test Plan:
- Edited some cards.
- Changed priority on a priority-sorted board, saw proper re-sort
- Removed board project, saw card vanish properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14712
Summary: Ref T9908. Fixes T8903. This moves the inline edit from task lists (but not from workboards) over to editengine.
Test Plan:
- Edited a task from a draggable list.
- Edited a task from an undraggable list.
- Edited a task, changed projects, saw refresh show correct projects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8903, T9908
Differential Revision: https://secure.phabricator.com/D14711
Summary: Normalize "getViewURI" and "getLiveURI" for PhameBlog and PhamePost. Use pretty URIs in PhamePost
Test Plan: View Recent, View posts, edit post, new post, move post, view live.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14713
Summary: Ref T9908. This fixes "Create Subtask" so it works with the new stuff. Mostly straightforward.
Test Plan: Created some subtasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14706
Summary: Ref T9908. This form has a reasonable behavior now after the global reordering stuff.
Test Plan: Clicked "Edit Task".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14708
Summary:
Ref T9908. This removes the "Create Another Empty Task", "Create A Similar Task" and "Create Another Subtask of Same Parent Task" workflow callouts on the task detail page, which are actions that show up after creating a task or creating a subtask.
- I think "Create Empty" isn't relevant now that we have "Create Task" nearby and the quick create menu?
- I'm not sure if "Create Similar" is worth keeping. If we do want to retain it, I'd maybe like to find a way to do it generically.
- I'm likewise not sure if "Create another subtask" is worth keeping.
Overall, these actions are weird/unusual and I'm not sure how valuable they are. I'm open to keeping "Similar" and/or "Subtask" but I'd like to verify that they're still valuable and make sure we have a reasonable design for them if we retain them.
For example, if we want to retain "Similar", maybe a better approach is just to add "Create Similar Object" to every action menu (which is now possible for EditEngine applications)? There's at least some interest in "Create Similar Repository" in Diffusion.
Also removes a very very old piece of "attached files" code.
Test Plan: Created and viewed some tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14705
Summary:
Ref T9132. Ref T9908. Puts reordering UI in place:
- For create forms, this just lets you pick a UI display order other than alphabetical. Seems nice to have.
- For edit forms, this lets you create a hierarchy of advanced-to-basic forms and give them different visibility policies, if you want.
Test Plan:
{F1017842}
- Verified that "Edit Thing" now takes me to the highest-ranked edit form.
- Verified that create menu and quick create menu reflect application order.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132, T9908
Differential Revision: https://secure.phabricator.com/D14704
Summary:
Ref T9132. Ref T9908. This attempts to move us forward on answering this question:
> Which form gets used when a user clicks "Edit Task"?
One answer is "the same form that was used to create the task". There are several problems with that:
- The form might not exist anymore.
- The user might not have permission to see it.
- Some of the fields might be hidden, essentially preventing them from being edited.
- We have to store the value somewhere and old tasks won't have a value.
- Any instructions on the form probably don't apply to edits.
One answer is "force the default, full form". That's not as problematic, but it means we have no ability to create limited access users who see fewer fields.
The answer in this diff is:
- Forms can be marked as "edit forms".
- We take the user to the first edit form they have permission to see, from a master list.
This allows you to create several forms like:
- Advanced Edit Form (say, all fields -- visible to administrators).
- Basic Edit Form (say, no policies -- visible to trusted users).
- Noob Edit Form (say, no policies, priorities, or status -- visible to everyone).
Then you can give everyone access to "noob", some people access to "basic", and a few people access to "advanced".
This might only be part of the answer. In particular, you can still //use// any edit form you can see, so we could do these things in the future:
- Give you an option to switch to a different form if you want.
- Save the form the task was created with, and use that form by default.
If we do pursue those, we can fall back to this behavior if there's a problem with them (e.g., original form doesn't exist or wasn't recorded).
There's also no "reorder" UI yet, that'll be coming in the next diff.
I'm also going to try to probably make the "create" and "edit" stuff a little more consistent / less weird in a bit.
Test Plan: Marked various forms as edit forms or not edit forms, made edits, hit permissions errors, etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132, T9908
Differential Revision: https://secure.phabricator.com/D14702
Summary: Fixes T9928. Not sure if this is best mechanic or add new methods to PhamePostQuery (a join?)
Test Plan: Archive a blog, don't see posts on PhameHome
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9928
Differential Revision: https://secure.phabricator.com/D14701
Summary:
Ref T9908. Simplify some of the policies here:
- If you can edit an application (currently, always "Administrators"), you can view and edit all of its forms.
- You must be able to edit an application to create new forms.
- Improve some error messages.
- Get about halfway through letting users reorder forms in the "Create" menu if they want to sort by something weird since it'll need schema changes and I can do them all in one go here.
Test Plan:
- Tried to create and edit forms as an unprivileged user.
- Created and edited forms as an administrator.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14700
Summary: Moves New Post and Move Post to be separate Controllers with Dialogs. Ref T9897
Test Plan: Move a post to a new blog, see message and see post. Click New Post, get dialog, pick blog, edit new post.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D14698
Summary:
Ref T9132. Ref T9908. Fixes T5622. This allows you to copy some fields (projects, subscribers, custom fields, some per-application) from another object when creating a new object by passing the `?template=xyz` parameter.
Extend "copy" support to work with all custom fields.
Test Plan:
- Created new pastes, packages, tasks using `?template=...`
- Viewed new template docs page.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5622, T9132, T9908
Differential Revision: https://secure.phabricator.com/D14699
Summary:
Ref T9908. We can get a double-header with this ("Quick Create", "Create Task") which looks weird.
The behavior of this menu is probably obvious enough on its own from context and the "+" icon.
Test Plan: Opened menu, no more "Quick Create" item.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14696
Summary:
Ref T9908. This is a behavioral change:
- Old behavior: "Subscribers" field is default-populated with author.
- New behavior: this transaction is just created no matter what.
The new behavior is much easier to make work with form defaults, hidden fields, etc. For example, on the "Create Bug" form, I've hidden "Subscribers", but I still want the author to be subscribed.
And if a user sets the default value of "Subscribers:" to "Alice, Bob", they almost certainly mean "Alice, Bob, and the task author".
And I ended up deleting myself by accident way more often than I deleted myself on purpose -- especially with "Create Similar task", I'd sometimes delete all the CCs and delete myself by accident and then have to put myself back.
Finally, technically speaking, restoring the old behavior is kind of hard/messy and this is much easier.
Test Plan:
- Created a task.
- Was automatically added as a subscriber.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14694
Summary:
Ref T9908. When there are custom / renamed / policy considerations for applications, respect them in the quick create menu.
This has some performance implications, in that it makes every page slower by two queries (and potentially more, soon), which is quite bad. I have some ideas to mitigate this, but it's not the end of the world to eat these queries for now.
Test Plan: {F1017316}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14693
Summary: Ref T9908. Now that you can submit multiple actions, you can "Open + Assign/Claim" a closed task, which is a reasonable action.
Test Plan: Assign/claim'd a closed task.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14692
Summary:
Ref T9908.
- You should not need edit permission on a task in order to comment on it.
- At least for now, ignore any customization in Conduit and Stacked Actions. These UIs always use the full edit form as it's written in the application.
Test Plan:
- Verified a non-editor can now comment on tasks they can see.
- Verified a user still can't use an edit form they can't see.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9908
Differential Revision: https://secure.phabricator.com/D14691
Summary: Fixes T6132. We currently allow invalid configuration here; validate it.
Test Plan: Tried to save invalid config (negative priorities, string priorities, etc).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6132
Differential Revision: https://secure.phabricator.com/D14689
Summary: I wrote this earlier in D14680 but have now realized that it's the same sentence twice when read carefully.
Test Plan: read more carefully
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14687
Summary: Update Ponder Questions and Answers to render Remarkup in Feed
Test Plan: New Question, Edit Question, New Answer, Edit Answer, New Comment. See //remarkup// in Feed.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9825
Differential Revision: https://secure.phabricator.com/D14648
Summary:
- ipull there is wrong
- The `+` wasn't doing what I thought it was doing.
- I already forgot what that detour was doing, so I wrote it down.
Test Plan: Load Versions page, see no error log.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D14686
Summary: Fixes T5788. We already have this as a pre-commit field, add it as a post-commit field too.
Test Plan: Ran this rule on a merge commit. Also ran it on a non-merge commit. Both got the correct value.
Reviewers: avivey, chad
Reviewed By: avivey, chad
Subscribers: avivey
Maniphest Tasks: T5788
Differential Revision: https://secure.phabricator.com/D14685
Summary:
Fixes T9206. This was also blocked on tokenizers being weird.
Also clean up some rendering stuff from the earlier changes.
Test Plan:
- Added an "unassign" rule by typing "None", per instructions in the placeholder text.
- Ran the rule.
- Task got unassigned.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9206
Differential Revision: https://secure.phabricator.com/D14684
Summary:
Ref T7848. This is a companion to "Change status to: ...".
(I'm pretty sure the only reason I didn't originally write these was the tokenizer bug in D14682, I just forgot about it).
This is basically a copy/paste of the "status" action.
Test Plan:
- Wrote a rule to change task priorities.
- Edited a task.
- Saw rule fire properly.
- Tokens also stick around correctly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7848
Differential Revision: https://secure.phabricator.com/D14683
Summary:
Fixes T7848. @jasonfsmitty discussed an issue in great detail there and in D14359, and I completely missed it. Specifically:
- If you save a "Change status to: Open" rule in Maniphest, and then edit it again, the token shows "Unknown Object (???)" instead of the correct token.
- That's because loadHandles() has no idea what to do with the value "open", since it's not a real PHID.
The way we render tokenizer tokens in Herald is quite hacky right now. Fortunately, I wrote a //slightly// better way for EditEngine yesterday or the day before. Use the slightly better way to fix the issue with D14359.
This could still be better than it is, but the badness is mostly hidden now and can be cleaned up later without impacting anything.
Test Plan: Edited a Herald rule with projects and status changes, saw proper tokens.
Reviewers: chad
Reviewed By: chad
Subscribers: jasonfsmitty
Maniphest Tasks: T7848
Differential Revision: https://secure.phabricator.com/D14682
Summary: Fixes T9496. If you have some statuses or priorities you don't need, allow users to disable them to stop the bleeding.
Test Plan:
- Set task to status X and priority Y.
- Disabled X and Y using config.
- Verified task still had old status/priority.
- Verified new task could not be created/edited into those settings.
- Verified task/priority appeared in typeahead, but were marked as disabled.
- Viewed email command docs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9496
Differential Revision: https://secure.phabricator.com/D14681
Summary:
Ref T7848. This patch is incomplete and has the following issues:
- Multiple statuses can be entered on the edit rule page (only the first one is used).
- Statuses are not rendered correctly when re-editing a rule.
Test Plan: Applied to our local phab instance and verified it works with our task workflow.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: joshuaspence, revi, epriestley, jsmith
Maniphest Tasks: T7848
Differential Revision: https://secure.phabricator.com/D14359
Summary:
Fixes T7250. Currently, if a display group of transactions (multiple transactions by the same author in a short period of time with no intervening comments) has several transactions of similar strength (e.g., several status change transactions) we can end up displaying them in reverse chronological order, which is confusing.
Instead, make sure transactions of the same type/strength are always in logical order.
Test Plan:
- Merged a task into another task, then reopened the merged task.
- Before patch: merge/reopen showed in wrong order.
{F1014954}
- After patch: merge/reopen show in correct order.
{F1014955}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7250
Differential Revision: https://secure.phabricator.com/D14680
Summary: For consistency, plus I ignore these. Ref T9897
Test Plan: Change to notify, log into notchad, subscribe, change back, see notification instead of email.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9909, T9897
Differential Revision: https://secure.phabricator.com/D14676
Summary: This just pretties up some config like `maniphest.custom-field-definitions` which I noticed was kind of hard to read while chasing down other stuff.
Test Plan: {F1014940}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14679
Summary: Ref T9132. See T9908#147038.
Test Plan:
- As user A, created a new task.
- As user B, started typing a comment on it (with no prior activity).
- Users A and B must be different.
Before patch: preview/draft don't work, trace in error log (see above).
After patch: preview/draft work.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14678
Summary:
Ref T9132. Fixes T4580. Thhat might actually have been fixed a while ago or something since it describes a buggy/bad interaction which doesn't reproduce for me at HEAD.
This saves and restores all the stacked actions (subscribers, projects, etc) so that you don't lose anything if you close a window by accident.
Test Plan:
Added a bunch of actions in various states, reloaded the page, draft stuck around.
Submitted form, actions didn't stick around anymore.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4580, T9132
Differential Revision: https://secure.phabricator.com/D14675
Summary: Ref T9132. I can't actually get rid of the EditController yet since a few weird things still use it, but I think I can swap this button out without breaking anything. This will let us do "New Feature Request" / "New Bug" / "Advanced Task Creation" on secure and start playing with this stuff sooner.
Test Plan: Clicked "Create Task", got sent to new form.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14673
Summary:
Ref T9132. We currently have an old preview/draft behavior and a new actions behavior.
Let the actions behavior do drafts/previews too, so we can eventually throw away the old thing.
This is pretty much just copying the old behavior into the new one, but with a few tweaks. The major change is that we submit all the stacked actions behavior now, so the preview reflects everything the change will do (and, soon, we can save it in the draft in a consistent way).
Also includes one hack-fix that I'll clean up at some point.
Test Plan: Added a bunch of stacked actions and observed meaningful previews.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14672
Summary:
Ref T9132. Open to discussion here since it's mostly product stuff, but here's my gut on this:
- Change Maniphest behavior to stop assigning tasks if they're unassigned when closed. I think this behavior often doesn't make much sense. We'll probably separately track "who closed this" in T4434 eventually.
- Only add the actor as a subscriber if they comment, like in other applications. Previously, we added them as a subscriber for other types of changes (like priority and status changes). This is more consistent, but open to retaining the old behavior or some compromise between the two.
- Retain the "when changing owner, subscribe the old owner" behavior.
Test Plan:
- Added a comment, got CC'd.
- Changed owners, saw old owner get CC'd.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14670
Summary:
Ref T9132. This is kind of a mess because the tokenizer rewrite left rendering tokenizers in Javascript a little rough. This causes bugs like icons not showing up on tokens in the "Policy" dialog, which there's a task for somewhere I think.
I think I've fixed it enough that the beahavior is now correct (i.e., icons show up properly), but some of the code is a bit iffy. I'll eventually clean this up properly, but it's fairly well contained for now.
Test Plan:
- Reassigned a task.
- Put a task up for grabs.
- No reassign on closed tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14669
Summary: Ref T9132. Supports selects in stacked actions and adds "Change Status" + "Change Priority".
Test Plan: Changed status and priority from stacked actions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14667
Summary:
Ref T9132. Only allow a task to have a single owner in the UI.
In Conduit, make this field appear and behave as "phid" instead of "list<phid>".
Test Plan: Edited a task with new fancy form, got limited to one owner. Assigned/unassigned. Used Conduit to assign/unassign.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14666
Summary: Ref T9132. This makes the "Quote" action on comments work properly in these applications.
Test Plan: Quoted text in each application.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14665
Summary: Ref T9132. Shhh this never happened shhhhhhh.
Test Plan: Selected multiple actions, saw them add at the bottom.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14664
Summary:
Ref T9132. Like D14659, I'll hold this until after the cut.
This swaps commenting in Maniphest over to EditEngine / stackable actions. New code doesn't have parity yet, although none of the things we're missing should technically be //strictly mandatory//. There's a list inline. I'll restore these in the next diffs.
Briefly -- comments, subscribers and projects work. Status, owners and priority do not yet.
Test Plan:
- Made comments and added subscribers and projects.
- Read through the old code to look for missing features and tried to document them all.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14663
Summary:
Ref T9132. I'm going hold this until after the release cut since it isn't going to land completely smoothly, but I think I can prep it today/tomorrow and hopefully get it close enough to working to put in HEAD on Saturday after the push.
This adds the basics: new EditEngine, new EditController, and new `maniphest.edit` API endpoint.
I put the new stuff at `editpro/` for now until it works a little better.
Some notes on stuff this is dropping/changing/not-working-yet:
- Preview for the description. I'd rather solve this by putting a "Preview" button on every Remarkup area if we want to retain it. Particularly, it does not generalize to adding custom remarkup fields in its current form. See also T3967.
- Per-field policies are no longer enforced. They were never truly enforced anyway (for example, any user who can edit a task has always been able to edit every field via Conduit or email actions or Herald, where Herald supports things), and only really served as a hint to users. I think we can obsolete this by having installs hide/lock these fields instead. This is a desirable outcome for me, since I don't like retaining these policies and the idea of truly enforcing them properly is worrisome. These were originally added for Uber as an onboarding sort of thing. I'll prepare users for this in greater detail in the documentation.
- Couple of minor bugs with ordering / defaults / only-one-owner-allowed in this diff that I'll clean up in future diffs before this stuff lands.
- I don't have a concrete plan on "Create Similar Task" / "Clone" yet (do you have thoughts? Is this worth trying to do in every application?). I'll probably just mostly mimic the current behavior.
Test Plan: I'll vet this more thoroughly in followups, just banged around some tasks for now and created/edited via the API.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14659
Summary: Provides a real 2x avatar and offers new built in images for profile pictures.
Test Plan: reload profile, see sharper image, pick eevee, see eevee
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14668
Summary: Use Profile Image, remove skin, show domain info better, add New Post button. Ref T9897
Test Plan: Test new buttons, see new images.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D14671
Summary: Make this function re-usable in other views. Ref T9897
Test Plan: View a blog, see the same information
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D14658
Summary: Color nodata as nodata, fix picture redirect, give hints when items aren't set on blogs. Ref T9897
Test Plan: Tested each of these items.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9897
Differential Revision: https://secure.phabricator.com/D14657
Summary: I spent way to long to arrive at this solution. Ref T9360
Test Plan: Publish a new post, see time, unpublish post, see draft. Start a new post, wait 10 minutes, publish, see "now".
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D14656
Summary: Ref T9132. This still has a lot of rough edges but the basics seem to work OK.
Test Plan: {F1012627}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14653
Summary:
Ref T9132. Fixes T5031. This approximately implements the plan described in T5031#67988:
When we recieve a preview request, don't write a draft if the form is from a version of the object before the last update the viewer made.
This should fix the race-related (?) zombie draft comments that sometimes show up.
I just added a new object for this stuff to make it easier to do stacked actions (or whatever we end up with) a little later, since I needed to do some schema adjustments anyway.
Test Plan:
- Typed some text.
- Reloaded page.
- Draft stayed there.
- Tried real hard to get it to ghost by submitting stuff in multiple windows and typing a lot and couldn't, although I didn't bother specifically narrowing down the race condition.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5031, T9132
Differential Revision: https://secure.phabricator.com/D14640
Summary:
Ref T9132. When I've touched `PhabricatorApplication` I keep hitting this bad `pht()` junk.
The warning is correct, these strings are not extactable and can not be translated.
Fix it so they can be extracted and translated.
Broadly, in all cases we want to render one of these:
> 95 Things (for fewer than some limit)
> 99+ Things (when we hit the limit)
Test Plan: Looked at homepage status counts, moused over them, saw reasonable strings. Grepped for removed method.
Reviewers: chad
Reviewed By: chad
Subscribers: joshuaspence
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14638
Summary:
Ref T9132. This just replaces the "Add Comment" form in Paste with a generic flow in EditEngine.
No actual field-awareness or action stacking or anything quite yet, but that will come in a bit. This mildly regresses drafts (which don't seem like a big deal for Pastes). I'll hook those up again in the next diff, but I want to build them in a better way that will work with multiple actions in a generic way, and solve T5031.
Big practical advantage here is that applications don't need copy/pasted preview controllers.
Test Plan:
- Saw previews.
- Added comments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14637
Summary: Seeing if this is the correct path, then will apply in Pholio, Ponder.
Test Plan: epriestley
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: joshuaspence, Korvin
Maniphest Tasks: T9825
Differential Revision: https://secure.phabricator.com/D14646
Summary: This adds a separate Publish/Unpublish step aside from Preview in Phame Posts. This allows easier access to publishing without previewing, though I left publish in tact on the preview page. Also cleaned up some minor transaction issues with mail.
Test Plan: New Post, Publish Post, Preview Post. Check mail logs. Get mail upon publish.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14642
Summary:
Ref T9132. Give most standard custom fields reasonable Conduit support so you can use the new `application.x` endpoints to set them.
Major missing field type is dates, again.
Test Plan: Used Conduit to set various custom fields on a package.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14635
Summary:
Ref T9132. This allows you to prefill custom fields with `?custom.x.y=value`, for most types of custom fields.
Dates (which are substantially more complicated) aren't supported. I'll just do those once the dust settles. Other types should work, I think.
Test Plan:
- Verified custom fields appear on "HTTP Parameters" help UI.
- Used `?x=y` to prefill custom fields on edit form.
- Performed various normal edits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14634
Summary:
Fixes T9874.
- Stop using the phrase "restart your webserver". Instead, say "restart Phabricator".
- Write a document explaining that "Restart Phabricator" means to restart all of the server processes, depending on how your configuration is set up, and approximately how to do that.
- Link to this document.
- In places where we are not specifically giving instructions and the user isn't expected to do anything, be intentionally vague so as to avoid being misleading.
Test Plan:
- Read document.
- Hit "exetnsion" and "PHP config" setup checks, got "restart Phabricator" with documentation links in both cases.
Reviewers: chad
Maniphest Tasks: T9874
Differential Revision: https://secure.phabricator.com/D14636
Summary:
Ref T9132. This isn't perfect, but doesn't break any existing functionality. This stuff works:
- Editing values.
- Reordering fields.
- All builtin field tyepes.
This stuff may not work yet:
- Assigning custom field defaults.
- Some conduit stuff.
- Fully custom fields?
- Locking/hiding fields? Didn't actually test this one.
I'll keep chipping away at that stuff. In some cases, it may be easier to convert all the CustomField apps first, although Differential might be a fair bit of work.
Test Plan:
Created a bunch of custom fields of every avialable type and edited them.
{F1008789}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14617
Summary:
Ref T9132. Paste is in fairly good shape so Owners is up next. Reasoning:
- One install wants API access for it.
- It's a simple application for getting CustomFields working with EditEngine.
This only does the EditEngine part, so CustomFields are no longer editable until I make that work. That will be up next, and I'll hold this until that's ready.
Test Plan:
- Created and edited packages via web UI.
- Created and edited package editing forms via web UI.
- Created and edited packages via Conduit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14598
Summary:
Fixes T9881. This one had Quicksand spelled as "QuickSand" (with capital "S") so it probably didn't get hit by `grep`.
Didn't need to do any special magic with the footer, as far as I can tell.
Test Plan: Loaded project board view, seemed to work OK (no footer, nav works, title works, mobile menu sane).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9881
Differential Revision: https://secure.phabricator.com/D14626
Summary: Removes all calls to addExtraQuicksandConfig Ref T9690
Test Plan: grep for addExtraQuicksandConfig, view a Pholio Page with and without chatbar, edit a pholio mock, save mock.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9690
Differential Revision: https://secure.phabricator.com/D14622
Summary: These weren't open to the public even if the blog was public.
Test Plan: View a blog post, blog view, and blog manage page while logged out.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14619
Summary: Sends `/phame/` to PhameHomeController, which is all published posts. Still some rough edges to work out for new posts, new blogs, but I think this is the right direction.
Test Plan:
go to Phame, see most recent posts, no drafts. click on find posts, see post list, click on find blogs, see blogs.
{F1008800}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9742
Differential Revision: https://secure.phabricator.com/D14618
Summary: Provides more information that a post is a draft.
Test Plan:
Add a draft post, see new style. Check Blog as non-editor, don't see draft post.
{F1008655}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D14613
Summary:
Ref T9132. This is a bit more cleanup to make adding CustomField support easier.
Right now, both `EditField` and `EditType` can actually generate a transaction. This doesn't matter too much in practice today, but gets a little more complicated a couple of diffs from now with CustomField stuff.
Instead, always use `EditType` to generate the transaction. In the future, this should give us less total code and make more things work cleanly by default.
Test Plan: Used web UI and Conduit to make various edits to pastes, including doing race-condition tests on "Projects".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14607
Summary: Ref T9132. I had some hacks in place for dealing with Edge/Subscribers stuff. Clean that up so it's structured a little better.
Test Plan:
- Edited subscribers and projects.
- Verified things still show up in Conduit.
- Made concurrent edits (added a project in one window, removed it in another window, got a clean result with a correct merge of the two edits).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14601
Summary:
Ref T9132. This is a quality-of-life improvement for new `application.edit` endpoints.
Instead of strictly requiring PHIDs, allow IDs or monograms. This primarily makes these endpoints easier to test and use.
Test Plan: Edited objects via API by passing IDs, PHIDs and monograms.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14600
Summary:
Ref T9132. Currently, EditEngine had some branchy-`instanceof` code like this:
```
if ($object instanceof Whatever) {
do_magic();
}
if ($object instanceof SomethingElse) {
do_other_magic();
}
```
...where `Whatever` and `SomethingElse` are first-party applications like ProjectsInterface and SubscribersInterface.
This kind of code is generally bad because third-parties can't add new stuff, and it suggest something is kind of hacky in its architecture. Ideally, we would eventually get rid of almost all of this.
T9789 is a similar discussion of this for the next layer down (`TransactionEditor`) and plans to get rid of branchy-instanceofs there too.
Since I'm about to add more stuff here (for Custom Fields), split it out first so I'm not digging us any deeper than I already dug us.
Broadly, this allows third-party extensions to add fields to every EditEngine UI if they want, like we do for Policies, Subscribers, Projects and Comments today (and CustomFields soon).
Test Plan:
{F1007575}
- Observed that all fields still appear on the form and seem to work correctly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14599
Summary: Creates a new PhameBlogView which is more of a blog landing page with the latest posts. Management has moved to PhameManageController with a new timeline.
Test Plan:
Edit Blog, Publish, Subscribe, view posts.
{F1008400}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D14608
Summary: Updates Herald to use modern methods.
Test Plan: View List, View Test Console, Run a test, View Results, View Rules, New Rule, Edit Rule, Check mobile menus.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9690
Differential Revision: https://secure.phabricator.com/D14596
Summary: Use modern methods in Pholio
Test Plan: View list, create mock, edit mock, view mobile menu
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9690
Differential Revision: https://secure.phabricator.com/D14595
Summary: Fixes T9869. This specific transaction endpoint was missing `shouldAllowPublic()`. Also modernize things a little.
Test Plan: Viewed a policy change by clicking the policy name from the transaction record on a public object while logged out.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9869
Differential Revision: https://secure.phabricator.com/D14606
Test Plan: warning is not in warnings list.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D14594
Summary:
Ref T9132.
Let configurations be enabled/disabled. This doesn't do much right now.
Let configurations be marked as default entries in the application "Create" menu. This makes them show up in the application in a dropdown, so you can replace the default form and/or provide several forms.
In Maniphest, we'll do this to provide a menu something like this:
- New Bug Report
- New Feature Request
- ADVANCED TASK CREATION!!11~ (only available for Community members)
Test Plan: {F1005679}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14584
Summary:
Ref T9845. In Differential, this is not a remarkup block -- it's a mail section. `addTextSection()` has special magic behavior when handed a prebuilt section since D9375.
Swapping to `addRemarkupSection()` causes the error in T9845 and renders nothing in the comment section.
Even if it were a block of text, it would not be appropriate to add it as remarkup. This would incorrectly render comments in files like `__init__.py`, which are common on Python (the filename would render as "__init__.py"). Okay that's a bad example since it works fine but, uh, a file named `T123` would be no good or whatever.
I'll realign T9845 to clean this up and fix it more durably.
Test Plan: Sent myself some mail with inline comments, saw them in the mail.
Reviewers: joshuaspence, chad
Reviewed By: chad
Maniphest Tasks: T9845
Differential Revision: https://secure.phabricator.com/D14589
Summary: Will use these more in the upcoming unbeta design of PhameBlog, likely. Also curious how this works.
Test Plan: Add an image to a blog, remove an image from a blog.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14587
Summary: Allows Blogs and Posts to be destroyed. Fixes T9756
Test Plan: Test `bin/remove destroy POST` and `bin/remove destroy BLOG` to great success.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9756
Differential Revision: https://secure.phabricator.com/D14586
Summary: This makes document views a little more automatic, and a little more style to the page. The Document itself remains on a pure white centered background, but footer and preceeding objects go back to the original body color. This provides a bit more depth and separation over content and definitions/comments.
Test Plan:
Tested Phriction, Diviner, Legalpad, Phame, Email Commands, HTTP Commands, with and without a footer.
{F1005853}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14582
Summary: Ref T9756, removes the ability to delete a PhamePost
Test Plan: See link removed, unpublish post, publish post, new post.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9756
Differential Revision: https://secure.phabricator.com/D14581
Summary: Ref T9851. See T9860. This adds a missing capability to custom HeraldActions, to pave the way for removing the obsolete/undesirable WILLEDITTASK and DIDEDITTASK events.
Test Plan: See T9860 for a replacement action.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9851
Differential Revision: https://secure.phabricator.com/D14575
Summary: Column status cannot be null fix.
Test Plan: Create a new blog.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14574
Summary:
Fixes T9850. The `getComment()` test should be a `hasComment()` test, in order to discard empty comments.
Also backport a couple of future fixes which can get you into trouble if you reconfigure forms in awkward ways.
Test Plan: Created a new paste without a comment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9850
Differential Revision: https://secure.phabricator.com/D14571
Summary: Also increase the timeout for the external process to complete the transform.
Test Plan: Careful inspection
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: joshuaspence, cburroughs, chad, Korvin
Differential Revision: https://secure.phabricator.com/D14528
Summary: Moves to showing Legalpad previews using PHUIDocumentViewPro
Test Plan: Create a new document, edit an existing document
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14550
Summary: Ref T992. I noticed that `ManiphestTask` mail doesn't render Remarkup properly (instead, it renders Remarkup literally). I //think// this is because the code calls `addTextSection()` rather than `addRemarkupSection()`.
Test Plan: Created a new Maniphest Task and saw Remarkup in the generated self-email (inspect the email contents with `./bin/mail show-outbound`). I didn't test the other affected applications.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T992
Differential Revision: https://secure.phabricator.com/D14511
Summary: Reuse PHUIMarkupPreviewView in Phame for consistency, less custom code. Also, doesn't work (JS issue).
Test Plan: New Post, Edit Post, Save Post
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14552
Summary:
Fixes T9832. We currently refuse to recognize project hashtags in remarkup if they begin with a digit. This is motivated by attempting to not recognize them if they contain only digits.
I don't think we really gain anything by this. Although most `#123` in text are probably not project references, the cost of doing a lookup for them is quite small, and //some// of them are.
In cases where users use `#123` to refer to tasks in an external system, they can use a rule for that with higher precedence than this one or not give their projects conflicting hashtags.
Test Plan:
- This is well-covered by unit tests.
- Referenced a `#3u1`, per T9832.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9832
Differential Revision: https://secure.phabricator.com/D14547
Summary: These constants are incorrect.
Test Plan: Archive a blog, see feed story. Publish a blog, see another feed story.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14545
Summary: Removes the exception, maybe there is a better way, but landing this for now. Fixes T9829
Test Plan: Test pages with and without a table of contents
Reviewers: epriestley, avivey
Subscribers: epriestley
Maniphest Tasks: T9829
Differential Revision: https://secure.phabricator.com/D14546
Summary:
Ref T9132. This adds an automatic "Comments" field, like the Subscribers/Projects/Policy fields.
The primary goals here are:
- Allow users to make comments via Conduit.
- In the future, get stackable action support.
As a side effect, this also allows you to put comments on create forms. This is a little silly but seems fine, and may be relevant on edit forms (which I'm not 100% sure how I want to handle yet). I've just hidden them by default for now.
Test Plan:
{F976036}
{F976037}
{F976038}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14515
Summary:
Ref T9132. Allows fields to be locked (shown, but not modifiable) and hidden (not shown).
In both cases, default values are still respected.
This lets you do things like create a form that generates objects with specific projects, policies, etc.
Test Plan:
- Set defaults.
- Locked and hid a bunch of fields.
- Created new objects using the resulting form.
{F975801}
{F975802}
{F975803}
{F975804}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14509
Summary: Ref T9132. Allow form configurations to include defaults (like default projects, spaces, policies, etc).
Test Plan:
Defaulted "Language" to "Rainbow", plus other adjustments:
{F975746}
{F975747}
{F975748}
{F975749}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14508
Summary:
Ref T9132. This just makes edited forms do //something//, albeit not anything very useful yet.
You can now edit a form and:
- Retitle it;
- add a preamble (instructions on top of the form); and
- reorder the form's fields.
Test Plan:
{F974632}
{F974633}
{F974634}
{F974635}
{F974636}
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14503
Summary: Fixes T9806. See some discussion there.
Test Plan:
- Edited a comment with `T12` in it.
- Before change: exception.
- After change: no exception.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9806
Differential Revision: https://secure.phabricator.com/D14539
Summary: Oops, I missed this -- when properties are `protected`, Lisk assumes they database properties which should be stored and read from the database. To make Lisk ignore a property, make it `private`.
Test Plan:
Should fix this:
{F990757}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14538
Summary:
Addresses T9814. Adds SVG files to Celerity maps. Adds a mask-icon.svg file that
I made by pulling the existing favicon into Illustrator and running trace on it.
This hardcodes the header color from the default theme, and doesn't pay attention
to customizations of the header.
Test Plan: I pinned the tab in Safari.
Reviewers: epriestley, #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: chad, Korvin
Maniphest Tasks: T9814
Differential Revision: https://secure.phabricator.com/D14527
Summary: Removes "delete" and uses "archive/activate" instead for Phame Blogs. Ref T9756
Test Plan: Archive a blog, see in search, activate blog, see in other search.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: joshuaspence, Korvin
Maniphest Tasks: T9756
Differential Revision: https://secure.phabricator.com/D14465
Summary: Ref T6049, Add Phurl URL create capability
Test Plan:
- Change {nav Home > Applications > Phurl > Configure} to allow no one to create Phurl URLs
- Attempt {nav Phurl > Shorten URL}. Should not be able to create a Phurl.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T6049
Differential Revision: https://secure.phabricator.com/D14510
Summary: Ref T6049, Phurl object view should display Phurl name or Phurl long url as header.
Test Plan:
- Create Phurl with no name. Header should show long url as header.
- Add name to Phurl. Header should be new Phurl name.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T6049
Differential Revision: https://secure.phabricator.com/D14502
Summary: Ref T6049, remarkup links to use short URLs and make commenting on Phurl's actually work
Test Plan:
- Create Phurl `U123`
- Comment on that Phurl `((123))`
Comment should link to `/u/123`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T6049
Differential Revision: https://secure.phabricator.com/D14477
Summary:
Fixes T9787. Currently, file PHID extraction logic happens very early, before we normalize/merge/etc the transactions.
In D14390, I changed how the CONTENT transaction works: before, callers would pass in a file PHID. Afterward, they just pass in the content.
Passing in the content is generaly easier and feels more correct, but inadvertenly broke PHID extraction because converting the content into a file PHID now happened after we extracted the PHID. So we'd extract the entire text of the paste as a "file PHID", which wouldn't work.
Instead, extract file PHIDs later. This impacts a couple of other applications (Conpherence, Pholio) which receive an object or have an unusual file-oriented transaction.
Test Plan:
- Made a new paste, verified the raw file attached to it properly.
- Made and updated a mock, verified all the files attached properly.
- Updated a Conpherence room image, verified the files attached properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9787
Differential Revision: https://secure.phabricator.com/D14494
Summary:
Ref T9787. To fix this, I want to change how file PHIDs are extracted slightly: specifically, I'm going to extract them later in the editing process.
Before doing this, clean up a couple of bad implementations:
- Owners extracts its description as a file PHID. This is an error.
- Extract the description as a remarkup block instead.
- Add an edge table so stuff like file attachment works properly.
- Differential has a no-op extract method. This is presumably just a copy/paste issue from long ago.
Test Plan:
- Edited a revision in Differential.
- Dropped a file into the description of an Owners package.
- Before change: this did not attach the file.
- After change: the file now attaches properly and shows up as "Attached" in the file details.
Reviewers: chad, joshuaspence
Reviewed By: joshuaspence
Subscribers: joshuaspence
Maniphest Tasks: T9787
Differential Revision: https://secure.phabricator.com/D14493
Summary: Fixes T9757.
Test Plan: Created a Herald rule and then subscribed to it with a different account.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9757
Differential Revision: https://secure.phabricator.com/D14468
Summary: Move some `PhabricatorPolicyRule` implementations to a subdirectory of the parent application.
Test Plan: N/A
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14478
Summary:
Fixes T9799. Currently, if you can't see an application like Paste, we fatal when trying to generate a result for `conduit.query`, because the new EditEngine-based `paste.edit` method doesn't "know" that it's a "Paste" method.
Straighten this out, and use policies and queries a little more correctly/consistently.
Test Plan:
- Called `conduit.query` as a user who does not have permission to use Paste.
- Before change: fatal.
- After change: results, excluding "paste.*" methods.
Reviewers: chad
Reviewed By: chad
Subscribers: cburroughs
Maniphest Tasks: T9799
Differential Revision: https://secure.phabricator.com/D14492
Summary:
Fixes T9798. That task has good repro instructions.
In sub-views, we don't link the "History" icon correctly -- we only link it to `history/README` instead of `history/path/to/README`. Add the full path.
Also canonicalize the paths in a slightly prettier and more consistenty way.
Test Plan: Viewed root and non-root browse tables, saw links show up properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9798
Differential Revision: https://secure.phabricator.com/D14491
Summary: As suggested in D14461.
Test Plan: Used `./bin/remove destroy` on an Almanac service with properties attached, saw entries removed from the `phabricator_almanac.almanac_property` table.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14490
Summary: Ref T9762. Currently it is not possible to destroy an Alamanac device because any associate bindings cannot be destroyed.
Test Plan: Destroyed an Almanac device.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T9762
Differential Revision: https://secure.phabricator.com/D14461
Summary: Some linter messages, such as those produced by `ArcanistPHPCompatibilityXHPASTLinterRule`, contain backticks but are currently rendered as Remarkup literals. I think that it is generally desirable to allow lint messages to be rendered as Remarkup, although we should ideally have a way to render Remarkup for use on the command line (I actually think that this already exists, but I don't think that `arc lint` does this when rendering linter messages).
Test Plan: Resubmitted D14481 to my dev install and saw Remarkuped lint messages.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14485
Summary: Rename the XHPAST database from `{$NAMESPACE}_xpastview` to `{$NAMESPACE}_xhpast`.
Test Plan: Ran `./bin/storage --namespace test upgrade --no-quickstart`.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14442
Summary: This logic is inverted. Re-vert it.
Test Plan: Write and publish a new post, see publish time.
Reviewers: epriestley, joshuaspence
Reviewed By: joshuaspence
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14464
Summary: I think `HeraldRule`s are the only objects which have monograms but are not accesible via `/{$monogram}`. This diff changes the `/herald/rule/{$id}` URI to `/{$monogram}`.
Test Plan: Clicked a bunch of links in Herald to ensure there were no dead links.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14469
Summary:
Current JIRA integration is quite noisy in terms of email, and makes users hunt and peck for the related revisions.
Teach it to create an Issue Link on the JIRA side, and allow to disable commenting.
Test Plan: comment on revision in each of the 4 settings, check JIRA end for expected result.
Reviewers: btrahan, eMxyzptlk, epriestley, #blessed_reviewers, avivey
Reviewed By: epriestley, #blessed_reviewers
Subscribers: avivey, vhbit, jra3, eMxyzptlk, frenchs, aik099, svemir, rmuslimov, cpa199, waynea, epriestley, Korvin, hach-que
Projects: #doorkeeper
Maniphest Tasks: T5422
Differential Revision: https://secure.phabricator.com/D9858
Summary: Fixes T9772. We now need an EditEngineConfiguration to do interesting things with EditEngine, but this public API wasn't properly making sure we have one.
Test Plan: Called `conduit.query` from web console. Fatal prior to patch; success afterward.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9772
Differential Revision: https://secure.phabricator.com/D14475
Summary: Ref T7053. Remove the `envHash` and `envInfo` fields, which are no longer used now that the daemons restart automagically. Depends on D14458.
Test Plan: Saw no more setup issues.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: tycho.tatitscheff, epriestley
Maniphest Tasks: T7053
Differential Revision: https://secure.phabricator.com/D14446
Summary: Right now we're attaching the body of every Phame post on each comment, at least restrict it to newly created objects only.
Test Plan: Write a new post, get full email, leave a comment, get less email.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14459
Summary: We currently orphan posts when you delete a blog. Fixes some visibility and permission errors when that happens. Also... should allow you to archive posts.
Test Plan: Delete a blog, visit a post I made, still can see it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D14457
Summary:
Ref T9132. This diff doesn't do anything interesting, it just lays the groundwork for more interesting future diffs.
Broadly, the idea here is to let you create multiple views of each edit form. For example, we might create several different "Create Task" forms, like:
- "New Bug Report"
- "New Feature Request"
These would be views of the "Create Task" form, but with various adjustments:
- A form might have additional instructions ("how to file a good bug report").
- A form might have prefilled values for some fields (like particular projects, subscribers, or policies).
- A form might have some fields locked (so they can not be edited) or hidden.
- A form might have a different field order.
- A form might have a limited visibility policy, so only some users can access it.
This diff adds a new storage object (`EditEngineConfiguration`) to keep track of all those customizations and represent "a form which has been configured to look and work a certain way".
This doesn't let these configurations do anything useful/interesting, and you can't access them directly yet, it's just all the boring plumbing to enable more interesting behavior in the future.
Test Plan:
ApplicationEditor forms now let you manage available forms and edit the current form:
{F959025}
There's a new (bare bones) list of all available engines:
{F959030}
And if you jump into an engine, you can see all the forms for it:
{F959038}
The actual form configurations have standard detail/edit pages. The edit pages are themselves driven by ApplicationEditor, of course, so you can edit the form for editing forms.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14453
Summary: Via HackerOne. See D14025. I missed this comparison when making the original change.
Test Plan:
- Used `cat mail.txt | scripts/mail/mail_handler.php --process-duplicates` to pipe mail in a whole lot of times.
- Tried bad hashes, saw rejections.
- Tried good hash, saw mail accepted.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14455
Summary: Adds mail reply support to Phame Posts.
Test Plan: Comment on a post, get mail.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9746
Differential Revision: https://secure.phabricator.com/D14454
Summary: When accessing an invalid URL on the short Phurl domain, users should see informative message
Test Plan: Open URL in the previously configured Phurl short domain such as `https://www.zz.us` and see dialog with message. Open `https://www.zz.us/u/123` for a valid `U123` Phurl and access destination URL.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14450
Summary: Adds commenting to Phame Posts, also testing a new "document comment style". Unsure about it but Phame is a prototype so good place to explore.
Test Plan: Leave some comments, see some comments, test show/hide.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9746
Differential Revision: https://secure.phabricator.com/D14451
Summary:
This diff adds a new mode argument to the Diffusion Conduit API with two options:
- "overwrite": the default, maintains the current behavior of deleting all coverage
in the specified branch before uploading the new coverage
- "update": does not delete old coverage, but will overwrite previous
coverage information if it's for the same file and commit
`DiffusionRequest::loadCoverage` already loads a file's coverage from the
latest available commit, so uploading coverage for different files in different
commits with "update" will result in seeing the latest uploaded coverage in
Diffusion.
Test Plan: manual local verification
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14428
Summary: Crumbies
Test Plan: View post, see blog link, click on crumb, see blog
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14449
Summary: Cleaning up house, may revisit in a v2. Removes ability to set Disqus or Facebook comments as comment system on Phame Posts.
Test Plan: Create blog, create post, edit blog, view live pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: btrahan, Korvin
Maniphest Tasks: T9746
Differential Revision: https://secure.phabricator.com/D14448
Summary: Ref T8995, config option for Phurl short domain to share shortened URL's
Test Plan:
- Configure Phurl short domain to something like "zz.us"
- Navigate to `zz.us`; get 404
- Navigate to `zz.us/u/3` or `zz.us/u/alias` where `U3` is an existing Phurl; redirect to correct destination
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T8995
Differential Revision: https://secure.phabricator.com/D14447
Summary: Drops Join Policy, uses Edit Policy where needed. Allows anyone with Blog Edit permissions to post and edit any post on that blog. Fixes T5371
Test Plan: Draft Post as chad, see post, log in with notchad, edit that post and publish it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5371
Differential Revision: https://secure.phabricator.com/D14444
Summary: Currently, a bunch of developers are using #xhpast for writing custom linter rules. As such, we end up with a fair few `XHPASTSyntaxErrorException` in our PHP error logs. I think that throwing an exception is not quite correct in this case because it is somewhat expected that invalid PHP may be entered. Instead, catch the exception and show the user a helpful message.
Test Plan: This doesn't quite work yet... the stream and tree views render as blank but the exceptions still propogate to the error logs. Mostly, I'm not sure how the exception should be rendered for display.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14028
Summary: Add some mailkeys, allow feed stories to be published.
Test Plan: New Blog, Edit Blog
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14434
Summary:
Fixes T9735. I changed how the TYPE_LANGUAGE transction works a little but that accidentally tripped an error condition in `paste.create`.
- Don't bail on no-effect transactions to `paste.create` (like not setting a language).
- When a transaction type has no tailored UI message, make it easier to figure out which transaction is problematic.
Test Plan: Ran `arc paste ...` locally. Got an error before the patch, clean paste creation afterward.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9735
Differential Revision: https://secure.phabricator.com/D14440
Summary: Fixes T9051, adds ability to edit blogs and posts and manually add subscribers. Also fixed bug granting tokens to posts.
Test Plan: Create a new blog, subcribe chad and notchad. Write a post, both are notified. Award token for hard work.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9051
Differential Revision: https://secure.phabricator.com/D14432
Summary:
Fixes T9732. We currently tokenize strings (like user realnames) in the default non-unicode mode, which can cause patterns like `\s` to work incorrectly.
Use `/u` to use unicode-aware tokenization instead.
Test Plan:
The behavior of "\s" depends upon environmental settings like LC_ALL.
With LC_ALL set to "C", `\xA0` is not considered a whitespace character.
With LC_ALL set to "en_US", it is:
```
$ php -r 'setlocale(LC_ALL, "C"); echo count(preg_split("/\s/", "\xE5\xBF\xA0")) . "\n";'
1
$ php -r 'setlocale(LC_ALL, "en_US"); echo count(preg_split("/\s/", "\xE5\xBF\xA0")) . "\n";'
2
```
To reproduce the original issue, I added an explicit:
```
setlocale(LC_ALL, "en_US");
```
...call before the `preg_split()` call. This caused "忠" to be improperly split.
I then added "/u", and observed proper tokenization.
Reviewers: chad
Reviewed By: chad
Subscribers: qiu8310
Maniphest Tasks: T9732
Differential Revision: https://secure.phabricator.com/D14441
Summary: Larger (open) installs may want to restrict Blog to formal entities, like with Phriction.
Test Plan: Set policy to administrators, have notchad try to create a blog. See error.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14433
Summary: fix T9718.
Test Plan: view project page when maniphest is and isn't. Look for Workboards.
Reviewers: #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: epriestley
Maniphest Tasks: T9718
Differential Revision: https://secure.phabricator.com/D14438
Summary: Sends out the body of the post along with the details.
Test Plan: Write a new post, see body in email.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D14431
Summary: Ref T7951, Starting the Calendar user guide
Test Plan: Go to {nav Diviner > Phabricator User Docs > Calendar User Guide}, read about how fabulous the Calendar application is.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: epriestley, Korvin
Maniphest Tasks: T7951
Differential Revision: https://secure.phabricator.com/D13496
Summary: Adds ability to set visibility when authoring a Post. New default is "Visible". If you write a post and save it as a Draft, and later click publish, a feed story and mail will go out.
Test Plan: Write a new Post, see feed story and get email. Write a new Draft, get nothing. Click Publish, see story and email.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9360
Differential Revision: https://secure.phabricator.com/D14429
Summary: Ref T9722, Add Phurl Remarkup as `((id))` or `((alias))`
Test Plan: Add a comment to any object as `((id))` or `((alias))`. Make sure comment renders as a link.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9722
Differential Revision: https://secure.phabricator.com/D14427
Summary: Allows feed stories and mail for new Phame Posts.
Test Plan: Write Post, Get Mail
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14426
Summary: Ref T9546. I only got the title to always show the blog title (better than nothing) -- showing the post title properly isn't trivial and is more work than I want to do right now.
Test Plan:
- Description now has remarkup.
- Title now shows blog title (better than nothing).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9546
Differential Revision: https://secure.phabricator.com/D14423
Summary: Adds Remarkup rules and CSS, cleans up some spacing a color. Ref T9546
Test Plan: Review a blog post list, and a blog
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9546
Differential Revision: https://secure.phabricator.com/D14421
Summary: Updates Phame for new modern methods.
Test Plan: New blog, edit blog, new post, edit post, publish post.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14419
Summary: Updates "View Post" to use PHUIDocumentViewPro, updates calls to `newPage` and other minor modernizations. Edit Page updated to show proper document display as well. Ref T9545
Test Plan:
Write a blog post, edit it.
{F945897}
{F945896}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9545
Differential Revision: https://secure.phabricator.com/D14415
Summary: Ref T8992, Cleaning up and clarifying xaction titles for Phurl creation/updating.
Test Plan: Create a Phurl, update information, make sure xaction in the timeline makes sense.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T8992
Differential Revision: https://secure.phabricator.com/D14414
Summary: Ref T8992, Make it impossible to save an empty string alias for a Phurl.
Test Plan:
- Create two Phurl's with non-empty aliases
- Delete aliases for both Phurl's
- Previously, this wouldn't allow to save the second Phurl because of a duplicate alias. Current diff should save empty alias as `null`, not empty string.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T8992
Differential Revision: https://secure.phabricator.com/D14413
Summary: This is a bit too grey, and doesn't match our theme well (see sequence navs)
Test Plan: Remarkup reference article, sequence navs
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14408
Summary: Ref T9132. This allows you to prefill EditEngine forms with stuff like `?subscribers=epriestley`, and we'll figure out what you mean.
Test Plan:
- Did `/?subscribers=...` with various values (good, bad, mis-capitalized).
- Did `/?projects=...` with various values (good, bad, mis-capitalized).
- Reviewed documentation.
- Reviewed {nav Config > HTTP Parameter Types}.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14404
Summary:
Ref T9132. We have several places in the code that sometimes need to parse complex types. For example, we accept all of these in ApplicationSearch and now in ApplicationEditor:
> /?subscribers=cat,dog
> /?subscribers=PHID-USER-1111
> /?subscribers[]=cat&subscribers[]=PHID-USER-2222
..etc. The logic to parse this stuff isn't too complex, but it isn't trivial either.
Right now it lives in some odd places. Notably, `PhabricatorApplicationSearchEngine` has some weird helper methods for this stuff. Rather than give `EditEngine` the same set of weird helper methods, pull all this stuff out into "HTTPParameterTypes".
Future diffs will add "Projects" and "Users" types where all the custom parsing/lookup logic can live. Then eventually the Search stuff can reuse these.
Generally, this just breaks the code up into smaller pieces that have more specific responsibilities.
Test Plan: {F944142}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14402
Summary: Ref T9132. This just moves code around, breaks it up into some smaller chunks, tries to reduce duplication, and adds a touch of documentation.
Test Plan: Created and edited pastes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14398
Summary:
Fix T9662.
Record who initiated the build, and allow this information as a parameter.
In this implementation, a 're-run' keeps the original initiator, which we maybe not desired?
Test Plan:
Make a HTTP step with initiator.phid, trigger manually, via HM, via ./bin/harbormaster build.
Look at requests made.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9662
Differential Revision: https://secure.phabricator.com/D14380
Summary: Ref T8992, Validate alias text field length.
Test Plan: Create Phurl with alias of more than 64 characters. Get error. Reduce length of alias to successfully save Phurl.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T8992
Differential Revision: https://secure.phabricator.com/D14403
Summary:
Exposes the serve-over-http and serve-over-ssh options for a repository
to the `bin/repository edit` endpoint.
Test Plan: Ran `bin/repository` with the new options over several hundred repos
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, chasemp, 20after4, epriestley
Differential Revision: https://secure.phabricator.com/D14250
Summary: Ref T8992, Phurl aliases must be unique. Otherwise throw an error.
Test Plan: Create two Phurl's both with alias 'asdf'. When saving second Phurl, form should show an error about the duplicate alias.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T8992
Differential Revision: https://secure.phabricator.com/D14401
Summary: Closes T9703. This page has become redundant 10 months ago, at D10988.
Test Plan: Look at /settings page, don't see word "Certificate".
Reviewers: epriestley, #blessed_reviewers, chad
Reviewed By: #blessed_reviewers, chad
Subscribers: Korvin
Maniphest Tasks: T9703
Differential Revision: https://secure.phabricator.com/D14400
Summary: Ref T8992, Add an alias to Phurl URL's that can be used to redirect to link.
Test Plan: Add an alias to Phurl object, and navigate to `local.install.com/u/<newalias>`. This should redirect to the Phurl's URL.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: joshuaspence, Korvin
Maniphest Tasks: T8992
Differential Revision: https://secure.phabricator.com/D14395
Summary: Use in MailCommands and HTTP Parameters
Test Plan: Tested MailCommands in Paste, HTTP Parameters in Paste, Legalpad, Diviner. Mobile and Desktop breakpoints.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14397
Summary:
Ref T9690. The "meta viewport" tag got dropped by accident because of the sort of weird logic on the old flow.
Make the default device-ready, then just turn it off for the tiny number of non-device pages.
Test Plan:
- Verified meta viewport tag appears on normal pages again.
- Verified it doesn't show up on non-mobile pages like Maniphest Reports.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9690
Differential Revision: https://secure.phabricator.com/D14396
Summary:
Ref T5873. Ref T9132. This is really rough and feels pretty flimsy at the edges (missing validation, generality, modularity, clean error handling, etc) but gets us most of the way toward generating plausible "whatever.edit" Conduit API methods from EditEngines.
These methods are full-power methods which can do everything the edit form can, automatically support the same range of operations, and update when new fields are added.
Test Plan:
- Used new `paste.edit` to create a new Paste.
- Used new `paste.edit` to update an existing paste.
- Applied a variety of different transactions.
- Hit a reasonable set of errors.
{F941144}
{F941145}
{F941146}
{F941147}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5873, T9132
Differential Revision: https://secure.phabricator.com/D14393
Summary:
Ref T9132. Although forms do generally support prefilling right now, you have to guess how to do it.
Provide an explicit action showing you which values are supported and how to prefill them. This is generated automatically when an application switches to ApplicationEditor.
Test Plan:
{F939804}
{F939805}
{F939806}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9132
Differential Revision: https://secure.phabricator.com/D14392
Summary:
Ref T9132. Ref T4768. This is a rough v0 of ApplicationEditor, which replaces the edit workflow in Paste.
This mostly looks and works like ApplicationSearch, and is heavily modeled on it.
Roughly, we define a set of editable fields and the ApplicationEditor stuff builds everything else.
This has no functional changes, except:
- I removed "Fork Paste" since I don't think it's particularly useful now that pastes are editable. We could restore it if users miss it.
- Subscribers are now editable.
- Form field order is a little goofy (this will be fixed in a future diff).
- Subscribers and projects are now race-resistant.
The race-resistance works like this: instead of submitting just the new value ("subscribers=apple, dog") and doing a set operation ("set subscribers = apple, dog"), we submit the old and new values ("original=apple" + "new=apple, dog") then apply the user's changes as an add + remove ("add=dog", "remove=<none>"). This means that two users who do "Edit Paste" at around the same time and each add or remove a couple of subscribers won't overwrite each other, unless they actually add or remove the exact same subscribers (in which case their edits legitimately conflict). Previously, the last user to save would win, and whatever was in their field would overwrite the prior state, potentially losing the first user's edits.
Test Plan:
- Created pastes.
- Created pastes via API.
- Edited pastes.
- Edited every field.
- Opened a paste in two windows and did project/subscriber edits in each, saved in arbitrary order, had edits respected.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4768, T9132
Differential Revision: https://secure.phabricator.com/D14390
Summary: Ref T9690. I wanted to do an example of how to do these but it looks like most of them are trivial (no callsites) and the rest are a little tricky (weird interaction with frames, or in Releeph).
Test Plan:
- Used `grep` to look for callsites.
- Hit all applications locally, everything worked.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9690
Differential Revision: https://secure.phabricator.com/D14385
Summary:
Fixes T5752. This obsoletes a bunch of old patterns and I'll follow up on those with a big "go do a bunch of mechanical code changes" task. Major goals are:
- Don't load named queries multiple times on search pages.
- Don't require extra code to get standard navigation right on mobile.
- Reduce the amount of boilerplate in ListControllers.
- Reduce the amount of boilerplate around navigation/menus in all controllers.
Specifically, here's what this does:
- The StandardPage is now a smarter/more structured object with `setNavigation()` and `setCrumbs()` methods. More rendering decisions are delayed until the last possible moment.
- It uses this to automatically add crumb actions to the application menu.
- It uses this to automatically reuse one SearchEngine instead of running queries multiple times.
- The new preferred way to build responses is `$this->newPage()` (like `$this->newDialog()`), which has structured methods for adding stuff (`setTitle()`, etc).
- SearchEngine exposes a new convenience method so you don't have to do all the controller delegation stuff.
- Building menus is generally simpler.
Test Plan:
- Tested paste list, view, edit, comment, raw controllers for functionality, mobile menu, crumbs, navigation menu.
- Edited saved queries.
- Tested Differential, Maniphest (no changes).
- Verified the paste pages don't run any duplicate NamedQuery queries.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5752
Differential Revision: https://secure.phabricator.com/D14382
Summary: Closes T9691, Validate URL on Phurl objects for using valid protocols.
Test Plan: Create or edit URL. Change URL to "asdf" and observe error. Change back to "http://google.com" and observe no error.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T9691
Differential Revision: https://secure.phabricator.com/D14389
Summary: Ref T8989, Phurl URL should always show an info banner if the URL isn't valid
Test Plan: Phurl objects with URL "google.com" should show an error banner, but objects with URL "http://google.com" should not show banner.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T8989
Differential Revision: https://secure.phabricator.com/D14386
Summary: Ref T8989, Phurl "Visit URL" should now route to an access controller that decides if the URL is valid whether to open it, or redirect back to Phurl object. New route is `local.install.com/u/1` to open link.
Test Plan:
- open Phurl object with invalid URL, "Visit URL" link should redirect back to object
- open Phurl object with valid URL, "Visit URL" link should open the link
- open `local.install.com/u/1` for `U1` with valid URL should open the link
- open `local.install.com/u/1` for `U1` with invalid URL should redirect to `local.install.com/U1`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: joshuaspence, Korvin
Maniphest Tasks: T8989
Differential Revision: https://secure.phabricator.com/D14381
Summary: Ref T8989, Add a "Visit URL" link to Phurl items and make it actionable if the URI has a valid protocol.
Test Plan:
- Create a Phurl object with a URI of "google.com".
- "Visit URL" action in action view should be greyed out.
- Edit object to have URI "http://google.com" and save. "Visit URL" link should be available and should redirect to the intended URL.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: chad, Korvin
Maniphest Tasks: T8989
Differential Revision: https://secure.phabricator.com/D14379
Summary: Rolls out PHUIDocumentViewPro to Legalpad. Minor tweaks to provide space around Preamble and Signature blocks. Otherwise, straight forward.
Test Plan:
Build a new document with and without Preamble, sign document.
{F933386}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14377
Summary:
This implements `PHUIDocumentViewPro` which should move to be the base for all documents (Phame, Phriction, Legalpad, Diviner). Overall this feels really good to me, but I'd like to roll it out into Diviner specifically first to work through the issues and then move into other apps and drop `PHUIDocumentView` once everything is converted. Some features are:
- White Background, no border on page
- Table of Contents is move to hidden menu (more space for documentation)
- Property List sits under the document
Some design decisions above are in anticipation of Phriction v3 and Unbeta Phame, specifically commenting and maybe some cool new Remarkup text layout options for Phame.
Test Plan:
Went through tons of pages on Diviner on Desktop, Tablet, Mobile. Bounce back to Phriction to make sure DocumentView CSS changes actually look better there.
{F930518}
{F930519}
{F930520}
{F930521}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: tycho.tatitscheff, joshuaspence, Korvin
Differential Revision: https://secure.phabricator.com/D14374
Summary: We haven't seen any issues here, remove the table and schema spec.
Test Plan: Not yet tested.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14067
Summary: These should be fine to land whenever.
Test Plan: N/A
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14066
Summary: Sets the `$can_edit` value correctly (previously it was hardcoded to `true`).
Test Plan: Went to http://phabricator.local/harbormaster/step/view/1/ and saw "Edit Step" disabled.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14373
Summary: See IRC. A user had a database set to 8 hours ahead of their web host. Try to catch and warn about these issues.
Test Plan: Artificially adjusted skew, saw setup warning.
Reviewers: avivey, chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14371
Summary:
Fixes T9669. Two issues:
- We were using `repositoryPHIDs` instead of `blueprintPHIDs` for the list of allowed blueprints. Use the correct value.
- We weren't enforcing `allowedBlueprintPHIDs` fully correctly. We //did// require an authorization, so the net effect was correct in nearly all cases, but we could have selected from too large a pool in the case where the application itself was doing the authorization (e.g., from the command line).
Test Plan: Ran a build through Drydock/Harbormaster locally.
Reviewers: chad, tycho.tatitscheff
Reviewed By: chad, tycho.tatitscheff
Subscribers: tycho.tatitscheff
Maniphest Tasks: T9669
Differential Revision: https://secure.phabricator.com/D14368
Summary: We are greedily hoarding this for ourselves, when we could enrich the world.
Test Plan: Used `{icon cog spin}`.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14369
Summary:
Fixes T9672. This was never turned into a custom field, for no particular reason. Convert it into one.
This is substantially similar to the existing "Apply Patch" field, which does the same thing (only shows a command).
We might rethink or remove this eventually (e.g., in a post-"Land Revision" world) but this makes it easier, at the very least.
Test Plan:
- Viewed a non-accepted revision (no hint).
- Viewed an accepted revision from a raw diff source (no hint).
- Viewed an accepted revision from Git (`arc land` hint).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9672
Differential Revision: https://secure.phabricator.com/D14367
Summary: Fixes T9674. This was wrong to start with (URI is `/edit/X/`, not `/X/edit/`) but we have a new view page anyway.
Test Plan:
- Visited an exmaple URI in my browser.
- Followed a build step link from "Authorized By: ..." in Drydock.
Reviewers: joshuaspence, chad
Reviewed By: chad
Maniphest Tasks: T9674
Differential Revision: https://secure.phabricator.com/D14366
Test Plan: chain another call after this
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D14364
Summary: Better formatting for object lists when in a dialog (like subscribers).
Test Plan:
Test a subscription list.
{F911522}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14353
Summary: This is //hilarious//.
Test Plan: Test icon on local install.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D14351
Summary: I didn't test the positive version of this -- the constant has value `2` but when we read it from the database it's `"2"` or whatever. Just do this for now and maybe someday we'll use strings.
Test Plan: will do production things
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D14352
Summary:
Ref T182. Make the disabled state of the button more accurately reflect whether clicking it will work.
Don't allow "land" to proceed unless the revision is accepted.
Test Plan: Saw button in disabled state, clicked it, got "only accepted revisions" message.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14350
Summary:
Ref T182. Ref T9252.
- Adds a "Test" repository operation that just runs `git status` to see if things work.
- Adds a button for it in Edit Repository.
- Shows operation status on the operation detail view to make this workflow work a little better.
- Adds a lot of words. Words words words words.
Test Plan:
- Tested repository operation.
- Read words.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182, T9252
Differential Revision: https://secure.phabricator.com/D14349
Summary:
Ref T182. When viewing a revision, if there are several error operations and then a success operation, we currently show the last error. This is misleading.
Instead, don't show anything if there's a success (this may require tuning eventually if you can land multiple times onto different branches or whatever, but should be reasonable for now).
Also make the table a little nicer, particularly for merge failure output.
Test Plan: {F910385}
Reviewers: chad, Mnkras
Reviewed By: Mnkras
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14348
Summary:
Ref T182. This command should never actually generate a commit because `--squash` prevents that, but `git` seems to sometimes hit a check for username/email configuration (maybe when merging a non-fastforward?).
Give it some dummy values to placate it. This command shouldn't commit anything so these values should never actually be used.
Test Plan: Landed rGITTESTd8c8643cb02bbe60048c6c206afc2940c760a77e.
Reviewers: chad, Mnkras
Reviewed By: Mnkras
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14347
Summary:
Ref T182. I lifted this logic out of `arc`, but the context is a little different there, and this option is too strict in "Land Revision".
Specifically, it prevents `git` from merging unless the merge is //strictly// a fast-foward, even with `--squash`. That means revisions can't merge unless they're rebased on the current `master`, even if they have no conflicts.
(This whole process will probably need additional refinement, but the behavior without this flag is more reasonable overall than the behavior with it for now.)
Test Plan: Will land stuff in production~~
Reviewers: chad, Mnkras
Reviewed By: Mnkras
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14346
Summary:
Ref T182. We just show "an error happened" right now. Improve this behavior.
This error handling chain is a bit ad-hoc for now but we can formalize it as we hit other cases.
Test Plan:
{F910247}
{F910248}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14343
Summary:
Ref T182. Couple of minor improvements here:
- Show the Drydock lease when viewing a Repository Operation detail screen. This just makes it easier to jump around between relevant objects.
- When tasks are waiting for a lease, awaken them when it breaks or is released, not just when it is acquired. This makes the queue move forward faster when errors occur.
Test Plan:
- Viewed a repository operation and saw a link to the lease.
- Did a bad land (intentional merge problem) and got an error in about ~3 seconds instead of ~17.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14341
Summary:
Ref T182.
- We just show the oldest operation right now, but we usually care about the oldest non-failure.
- Only query for actual land operations when rendering the revision operations dialog (maybe eventually we'll show more stuff?).
- For now, prevent multiple lands / repeated lands or queueing up lands while other lands are happening.
Test Plan: Landed a revision. Tried to land it more / again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14338
Summary:
Ref T182. Currently, the "RepositoryLand" operation is responsible for performing merges when landing a revision.
However, we'd like to be able to perform these merges in a larger set of cases in the future. For example:
- After Releeph is revamped, when someone says "I want to merge bug fix X into stable branch Y", it would probably be nice to make that a Buildable and let tests run against it without requring that it actually be pushed anywhere.
- Same deal if we want a merge-from-Diffusion or cherry-pick-from-Diffusion operation.
- Similar deal if we want a "random web UI edits from Diffusion".
Move the merging part into WorkingCopy so more applications can share/use it in the future.
A big chunk of this is me making stuff up for now (the ol' undocumented dictionary full of arbitrary magic keys), but I anticipate formalizing it as we move along.
Test Plan: Pushed rGITTEST0d58eef3ce0fa5a10732d2efefc56aec126bc219 up from my local install via "Land Revision".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T182
Differential Revision: https://secure.phabricator.com/D14337
Summary:
Ref T9252. Right now, we have very strict limits on Drydock: one lease per host, and one working copy per working copy blueprint.
These are silly and getting in the way of using "Land Revision" more widely, since we need at least one working copy for each landable repository.
For now, just remove the host limit and put a simple limit on working copies. This might need to be fancier some day (e.g., limit working copies per-host) but it is generally reasonable for the use cases of today.
Also add a `--background` flag to make testing a little easier.
(Limits are also less important nowadays than they were in the past, because pools expand slowly now and we seem to have stamped out all the "runaway train" bugs where allocators go crazy and allocate a million things.)
Test Plan:
- With a limit of 5, ran 10 concurrent builds and saw them finish after allocating 5 total resources.
- Removed limit, raised taskmaster concurrency to 128, ran thousands of builds in blocks of 128 or 256.
- Saw Drydock gradually expand the pool, allocating a few more working copies at first and a lot of working copies later.
- Got ~256 builds in ~140 seconds, which isn't a breakneck pace or anything but isn't too bad.
- This stuff seems to be mostly bottlenecked on `sbuild` throttling inbound SSH connections. I haven't tweaked it.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9252
Differential Revision: https://secure.phabricator.com/D14334
Summary:
Fixes T9519. Right now, build steps go straight from the build to the edit screen.
This means that there's no way to see their edit history or review details without edit permission. In particular, this makes it a bit harder to catch the Drydock Blueprint authorization warnings from T9519.
- Add a standard view screen.
- Add a little warning callout to blueprint authorizations.
This also does a bit of a touchup on the weird dropshadow element from T9586. Maybe not totally design-approved now but it's less ugly, at least.
Test Plan:
{F906695}
{F906696}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9519
Differential Revision: https://secure.phabricator.com/D14330
Summary:
Ref T9614. Currently, a lot of Build Plan behavior is covered by a global "can manage" policy.
One install in particular is experiencing difficulty with warring factions within engineering aborting one another's builds.
As a first step to remedy this, and also generally make Harbormaster more flexible and bring it in line with other applications in terms of policy power:
- Give Build Plans normal view/edit policies.
- Require "Can Edit" to run a plan manually.
Having "Can View" on plans may be a little weird in some cases (the status of a Buildable might be bad because of a build you can't see) but we can cross that bridge when we come to it.
Next change here will require "Can Edit" to abort a build. This will reasonably allow installs to reserve pause/abort for administrators/adults. (I might let anyone restart a plan, though?)
Test Plan:
- Created a new build plan.
- Verified defaults were inherited from application defaults (swapped them around, too).
- Saved build plan.
- Edited policies.
- Verified autoplans get the right policies.
- Verified old plans got migrated properly.
- Tried to run a plan I couldn't edit (denied).
- Ran a plan from CLI with `bin/harbormaster`.
- Tried to create a plan with an unprivileged user.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9614
Differential Revision: https://secure.phabricator.com/D14321
Summary: Fixes T9631. Build steps created before I added this option may not have it specified, which could throw later. Make handling a little more robust.
Test Plan: Will ask @yelirekim to report back.
Reviewers: chad
Reviewed By: chad
Subscribers: yelirekim
Maniphest Tasks: T9631
Differential Revision: https://secure.phabricator.com/D14336
Summary:
Fixes T9610.
- We currently permit you to `bin/auth recover` users who can not establish web sessions (but this will never work). Prevent this.
- We don't emit a tailored error if you follow one of these links. Tailor the error.
Even with the first fix, you can still hit the second case by doing something like:
- Recover a normal user.
- Make them a mailing list in the DB.
- Follow the recovery link.
The original issue here was an install that did a large migration and set all users to be mailing lists. Normal installs should never encounter this, but it's not wholly unreasonable to have daemons or mailing lists with the administrator flag.
Test Plan:
- Tried to follow a recovery link for a mailing list.
- Tried to generate a recovery link for a mailing list.
- Generated and followed a recovery link for a normal administrator.
{F906342}
```
epriestley@orbital ~/dev/phabricator $ ./bin/auth recover tortise-list
Usage Exception: This account ("tortise-list") can not establish web sessions, so it is not possible to generate a functional recovery link. Special accounts like daemons and mailing lists can not log in via the web UI.
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9610
Differential Revision: https://secure.phabricator.com/D14325
Summary: Ref T9625. I want this to be fixed ASAP hence here's the patch.
Test Plan:
- ~~Apply D14323~~ (This patch was made before it was merged)
- Apply this patch
- voila! Now I see the Ponder answer has correct logo.
{F906357}
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, revi
Maniphest Tasks: T9625
Differential Revision: https://secure.phabricator.com/D14331
Summary: Ref T9625. This is an example of how to fill in the missing calls.
Test Plan:
- Verified that an icon is now shown for feed stories.
- Verified that an icon is now shown in the "PHID Types" module panel in Config.
{F906325}
{F906326}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9625
Differential Revision: https://secure.phabricator.com/D14324
Summary: Ref T9625. Some PHID types are missing application or icon specifications. This makes it easier to spot them.
Test Plan: {F906321}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9625
Differential Revision: https://secure.phabricator.com/D14323
