Summary:
Ref T2543. This adds a tokenizer, similar to the Maniphest tokenizer, so the hard-coded `<select />` control in Differential ApplicationSearch can be replaced with a more flexible control that handles the addition of new statuses with more grace.
This only adds the new datasource.
Test Plan: Used `/typeahead/class/` to preview the behavior of the new datasource.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18392
Summary: See PHI31. The "Accepted Older Revision" icon is (more reasonably) bluegrey, but that rule spilled over here where it doesn't make much sense. "Requested Changes to Prior Diff" remains in effect across updates, but the coloration implies otherwise.
Test Plan:
"Requested Changes to This Diff" (unchanged):
{F5092019}
"Requested Changes to Prior Diff" (now red, previously bluegrey):
{F5092020}
Note that the icons are different so this is technically colorblind-safe, and it's normally not important to distinguish between these two reds anyway.
Reviewers: chad, lvital
Reviewed By: lvital
Subscribers: lvital
Differential Revision: https://secure.phabricator.com/D18385
Summary:
Ref T2543. Currently, Differential uses a set of hard-coded query filters (like "open" and "closed") to query revisions by status (for example, "open" means any of "review, revision, changes planned, accepted [usually]").
In other applications, like Maniphest, we've replaced this with a low level list of the actual statuses, plus higher level convenience UI through tokenizer functions. This basically has all of the benefits of the hard-coded filters with none of the drawbacks, and is generally more flexible.
I'd like to do that in Differential, too, although we'll need to keep the legacy maps around for a while because they're used by `differential.find` and `differential.getrevision`. To prepare for this, pull all the legacy stuff out into a separate class. Then I'll modernize where I can, and we can get rid of this junk some day.
Test Plan: Grepped for `RevisionQuery::STATUS`. Ran queries via Differential UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18343
Summary:
Ref T2543. Add `isPublished()` to mean: exactly the status 'closed', which is now interally called 'published', but still shown as 'closed' to users.
We have some callsites which are about "exactly that status", vs "any 'closed' status", e.g. including "abandoned".
This also introduces `isChangePlanned()`, which felt less awkward than `isChangesPlanned()` but more consistent than `hasChangesPlanned()` or `isStatusChangesPlanned()` or similar.
Test Plan: `grep`, loaded revisions, requested review.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18341
Summary:
Ref T2543. Further consolidates status management into DifferentialRevisionStatus.
One change I'm making here is internally renaming "CLOSED" to "PUBLISHED". The UI will continue to say "Closed", at least for now, but this should make the code more clear because we care about "is closed, exactly" vs "is any closed status (closed, abandoned, sometimes accepted)". This distinction is more obvious as `isClosed()` vs `isPublished()` than, e.g., `isClosedWithExactlyTheClosedStatus()` or something. I think "Published" is generally more clear, too, and more consistent with modern language (e.g., "pre-publish review" replacing "pre-commit review" to make it more clear what we mean in Git/Mercurial).
I've removed the IN_PREPARATION status since this was just earlier groundwork for "Draft" and not actually used, and under the newer plan I'm trying to just abandon `ArcanistDifferentialRevisionStatus` entirely (or, at least, substantially).
Test Plan:
- Viewed revisions.
- Viewed revision list.
- Viewed revisions linked to a task in Maniphest.
- Viewed revision graph of dependencies in Differential.
- Grepped for `COLOR_STATUS_...` constants.
- Grepped for removed method `getRevisionStatusIcon()` (no callsites).
- Grepped for removed method `renderFullDescription()` (one callsite, replaced with just building a `TagView` inline).
- Grepped for removed method `isClosedStatus()` (no callsites after other changes).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18340
Summary:
Ref T2543. These are currently numeric values, like "0" and "3". I want to replace them with strings, like "accepted", and move definitions from Arcanist to Phabricator.
To set the stage for this, reduce the number of callsites where Phabricator invokes `ArcanistDifferentialRevisionStatus`.
This is just the easy ones. I'll hold this until the release cut.
Test Plan:
- Called `differential.find`.
- Called `differential.getrevision`.
- Called `differential.query`.
- Removed all reviewers from a revision, saw warning.
- Abandoned the no-reviewers revision, no more warning.
- Attached a revision to a task to get it to show the state icon with the status on a tooltip.
- Viewed revision bucketing on dashboard.
- Used `bin/search index` to reindex a revision.
- Hit the "Land Revision" endpoint.
I didn't explicitly test these cases:
- Doorkeeper Asana integration, since setup takes a thousand years.
- Disambiguation logic when multiple hashes match, since setup is also very involved.
- Releeph because it's Releeph.
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18339
Summary: Fixes T12952. This never work AFAIK, so resolves this mis-information. See T4411 for follow up.
Test Plan: Click on policy for a diff, no longer see text.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12952
Differential Revision: https://secure.phabricator.com/D18349
Summary:
Reverts D18276. See PHI18 for discussion. The additional rules here (roughly, "only show the first successful operation") didn't actually work out for the other types of operations.
This is all just figuring out a stopgap, T12935 and other changes should eventually provide real pathways here.
Test Plan: Straight revert.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18281
Summary:
See PHI18. Third parties can currently define other types of Drydock operations (like "Merge Check" or "Cherry-Pick") but we won't show them in the UI.
This is a simple change which improves third-party support for now. These kinds of operations generally make sense in the upstream, but the pathways to support are longer.
Test Plan:
- Verified that there are no other types of repository operation which we'd want to exclude in the upstream today by reviewing the "Repository Operation" subclasses.
- Will click some buttons in production to make sure this works.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18276
Summary: Cleans up colors, removes commit hash and links the text instead. Also unsure how valuable "lint" column is here, but left it. I'd maybe like to understand that workflow since it just seems like clutter overall. Also Fixes T12905
Test Plan:
Review Phabricator, hg, and a few other test repositories locally. Holler if anything here seems bad, but this feels easier to read and use to me.
{F5038425}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12905
Differential Revision: https://secure.phabricator.com/D18189
Summary:
When users use the web UI to enter text like "Reviewers: x" into the "Summary" or "Test Plan", we can end up with an ambiguous commit message.
Some time ago we added a warning about this to the "Summary" field, and //attempted// to add it to the "Test Plan" field, but it actually gets called from the wrong place.
Remove the code from the wrong place (no callers, not reachable) and put it in the right place.
This fixes an issue where users could edit a test plan from the web UI to add the text "Tests: ..." and cause ambiguities on a later "arc diff --edit".
Test Plan: {F5026603}
Reviewers: chad, amckinley
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18175
Summary: Ref T12845. This moves the "enum" and "string" types to the new code.
Test Plan: Set, deleted, and tried to set invalid values for various enum and string config values (header color, mail prefixes, etc) from the CLI and web.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18156
Summary: This was accidentally caught in the crossfire in D18150. This is stable enough to formalize instead of adding with an event hook.
Test Plan: Looked at a candidate revision, saw "Land Revision" appear in UI again.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18154
Summary:
Fixes T12869. This is a very old, pre-Drydock chunk of code from D7486 and some followups.
It does three things:
- "Land to Hosted Git": Obsoleted by Drydock, has been commented out in HEAD for a very long time with no complaints. Disabled by D8719 in 2014.
- "Land to Hosted Mercurial": Could be obsoleted by Drydock with a fairly small amount of work, but currently has no replacement. Unclear if this sees any real use. Not actually disabled at HEAD.
- "Land to GitHub": Use GitHub OAuth credentials to land to GitHub. This is sort of theoretically useful and has no analog today. Disabled by D13022 in 2015.
This stuff was largely disabled a long time ago and we haven't seen users hitting issues with it. This could all be moved to an extension today if anyone still relies on it.
Test Plan: Grepped for removed classes, browsed Differential.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12869
Differential Revision: https://secure.phabricator.com/D18150
Summary:
Fixes T8909. Ref T12733.
UI attempts to follow the mock, but is a bit rough since PHUIXButtonView without text in this menu gets weird spacing, we don't have circular buttons yet, and PHUIXActionView without an icon also gets odd spacing.
Test Plan: {F5003125}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733, T8909
Differential Revision: https://secure.phabricator.com/D18128
Summary:
Ref T12733. This paves the way for a separate "hide" operation which completely hides things.
(I didn't extend this to the server side because that would require schema changes and the new "hide" state is client-only.)
Test Plan: Collapsed and expanded inlines, viewed tooltips.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18126
Summary: Adds a very basic list of all inline comments, threaded, and their status. Kept this a little simpler than the mock, mostly because sorting here feels a little strange given threads would be all over the place. Not sure sorted is needed in practice anyways. I'd probably lean towards just adding a JS checkbox to hide certain rows if needed in the future.
Test Plan:
Test various commenting structures:
- Leave Comment
- Update Diff
- Leave new comment
- Reply to comment
- Reply to comment as revision author
- Mark items as done
- Update diff again
{F4996915}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D18112
Summary: Try to dis-ambiguate various button types and colors. Moves `simple` to `phui-button-simple` and moves colors to `button-color`.
Test Plan: Grep for buttons still inline, UIExamples, PHUIX, Herald, and Email Preferences.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18077
Summary: Ref T12733. Completely removes the objectives UI.
Test Plan:
- Grepped for `objective`, etc.
- Browsed revisions, no JS errors / broken stuff.
- (If I missed anything, it's likely to turn up in followup changes.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18043
Summary:
Fixes T12757. Here's a simple repro for this:
- Add a package you own as a reviewer to a revision you're reviewing.
- Open two windows, select "Accept", don't submit the form.
- Submit the form in window A.
- Submit the fomr in window B.
Previously, window B would show an error, because we considered accepting on behalf of the package invalid, as the package had already accepted.
Instead, let repeat-accepts through without complaint.
Some product stuff:
- We could roadblock users with a more narrow validation error message here instead, like "Package X has already been accepted.", but I think this would be more annoying than helpful.
- If your accept has no effect (i.e., everything you're accepting for has already accepted) we currently just let it through. I think this is fine -- and a bit tricky to tailor -- but the ideal/consistent beavior is to do a "no effect" warning like "All the reviewers you're accepting for have already accepted.". This is sufficiently finnicky/rare (and probably not terribly useful/desiable in this specific case)that I'm just punting.
Test Plan: Did the flow above, got an "Accept" instead of a validation error.
Reviewers: chad, lvital
Reviewed By: chad, lvital
Subscribers: lvital
Maniphest Tasks: T12757
Differential Revision: https://secure.phabricator.com/D18019
Summary:
Ref T12733.
- While editing a comment, show a pink star ({icon star, color=pink}) with a tooltip.
- Slight UI tweaks, including draft comments getting an indigo pencil ({icon pencil, color=indigo}).
Test Plan: {F4968470}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17977
Summary: See D17955.
Test Plan: Loaded a revision, no longer saw annotations with prototypes off. Still saw annotations with prototypes on.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17983
Summary:
Minor UI tweaks:
- Use the dynamic icon for each file (e.g., image, text), not a hard-coded icon.
- Render the path (less important) in grey and the filename (more important) in black.
Test Plan: {F4966176}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17957
Summary:
Add important objectives (like waygates and quest markers) to the minimap.
This also probably fixes @cspeckmim's bug with the {key @} keyboard shortcut.
Test Plan:
(This is probably easier to undestand if you `arc patch` + click around.)
{F4966037}
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: cspeckmim
Differential Revision: https://secure.phabricator.com/D17955
Summary:
Fixes T1591. This was removed long ago because it was a mess to implement and caused a bunch of weird issues, and also my tolerance for dealing with weird JS issues was much, much lower.
I have now survived the fires of JX.Scrollbar and would love to address 200 small nitpicks about obscure browser behaviors on Linux, so open the floodgates again.
A secondary goal here is to create room to add a global view state menu on the right, with 300 options like "hide all inlines", "hide done inlines", "hide collapsed inlines", "hide ghosts", "show ghosts", "enable filetree", "disable filetree", etc, etc. Not sure how much of this I'll actually do. I have one more experiment I want to try first.
Test Plan: {F4963294}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T1591
Differential Revision: https://secure.phabricator.com/D17945
Summary:
Ref T12616. This puts "h" back to collapse or expand the current file.
This removes some very complicated/messy code around following links in the table of contents and getting files auto-expanded. I suspect no one will miss this, but we can restore it if ayone notices.
Test Plan: Pressed "h" to collapse/expand a file. Also used the menu items.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17940
Summary:
Fixes T8323. See that task for a description.
We were using `nonempty()`, but that rule doesn't cover synthetic deletions (file present in an earlier diff, but no longer present in the later diff).
Test Plan: Followed the steps in T8323, got a clean comment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8323
Differential Revision: https://secure.phabricator.com/D17929
Summary: Ref T12616. This makes line range selection use the new code, and removes the remainder of the old "hover a line number" / "select a line range" code.
Test Plan: Hovered line numbers; selected line ranges.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17927
Summary:
Fixes T7682. The left-hand-side "<th />" row did not generate with the correct ID.
(I couldn't reproduce the exact issue described in T7682, but hovering comments on either side now works properly for me.)
Test Plan: {F4962479}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7682
Differential Revision: https://secure.phabricator.com/D17926
Summary:
Ref T11401. Fixes T5232. Ref T12616.
Partly, this moves more code over to the new stuff.
This also allows "r" to work if you have code selected (not just comments). If you "reply" to code, you start a new comment.
You can "R" a comment to quote it. This just starts a new comment normally if you "R" a block of code. This is sort of a power-user version of "quote" since it seems like it probably doesn't really make sense to put it in the UI ever (maybe).
With the new click-to-select, you can click + "R" to reply-with-quote.
Test Plan: Used "r" and "R" to reply to comments and code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T11401, T5232
Differential Revision: https://secure.phabricator.com/D17920
Summary:
Ref T12616. Fixes T12715. I suspect these are very rarely used. (I think you tried to get rid of them before but I pushed back since we couldn't really offer great alternatives at the time?)
Now that the code is in a better place:
- Click an inline's header (just the colored part) to select it with the keyboard selection cursor.
- Click again to deselect it.
- You can use "n" and "p" to jump to comments, so "click + n" is the same as the old "V" action.
- This also makes it easier to swap between keyboard and mouse workflows, since you can jump into things with the keyboard at any inline.
Also, make "Reply" render more consistently.
Test Plan:
- Did all that stuff, things seemed to work OK.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12715, T12616
Differential Revision: https://secure.phabricator.com/D17908
Summary:
Fixes T8130. Allows selected comments to be shown/hidden (with "q") or marked done/not-done (with "w").
(These key selections are because "qwer" are right next to each other on QWERTY keyboards, and now mean "hide, done, edit, reply".)
Also, allow "N" and "P" to do next/previous inline, including hidden inlines. This makes "q" to hide/show a little more powerful and a little easier to undo.
Test Plan: Used "q", "w", "N" and "P" to navigate and interact with comments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8130
Differential Revision: https://secure.phabricator.com/D17906
Summary: Ref T12616. This makes "edit" and "reply" work again.
Test Plan:
Used "e" and "r" to edit and reply.
Also used them in bogus ways and got useful UI feedback.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17895
Summary: Ref T12616. This moves most keyboard shortcuts into DiffChangesetList. It breaks some shortcuts that I plan to restore later, noted in T12616 (toggle file, edit inline, reply to inline), since I think ripping them out now and rebuilding them in a little bit will make things much simpler.
Test Plan:
- Used j, k, n, p, J, K shortcuts to navigate a revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17859
Summary:
Ref T12616. Fixes T12153. Currently, when you hide inlines, they hide completely and turn into a little bubble on the previous line.
Instead, collapse them to a single line one-by-one. Narrowly, this fixes T12153.
In the future, I plan to make these changes so this feature makes more sense:
- Introduce global "hide everything" states (T8909) so you can completely hide stuff if you want, and this represents more of a halfway state between "nuke it" and "view it".
- Make the actual rendering better, so it says "epriestley: blah blah..." instead of just "..." -- and looks less dumb.
The real goal here is to introduce `DiffInline` and continue moving stuff from the tangled jungle of a million top-level behaviors to sensible smooth statefulness.
Test Plan:
- Hid and revealed inlines in unified and two-up modes.
- These look pretty junk for now:
{F4948659}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T12153
Differential Revision: https://secure.phabricator.com/D17861
Summary: Ref T12616. This cements the relationship between ChangesetList (parent container) and Changeset (child) and passes translations down so Changeset can use them to translate the text "Loading..."
Test Plan: Viewed loading changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17846
Summary: Ref T12616. This ends up being a little messy ("one giant function") and maybe I'll clean it up a bit later, but continue consolidating the wild jungle of behaviors into a smaller set of responsible objects.
Test Plan: Clicked all the menu options, saw them work properly. Grepped for removed methods.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17845
Summary:
Fixes T12679. Reproduction steps appear to be:
- As a logged-out user, view revision list or commit list.
- Enable bucketing by action required.
- Before patch: `foreach (null as ...)` causes error spew.
- After patch: `foreach (array() as ...)` works great.
Test Plan:
- Reproduced issue by following steps above in Differential (revisions) and Diffusion (audits/commits).
- After patches, no more errors in the log.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12679
Differential Revision: https://secure.phabricator.com/D17872
Summary:
Fixes T12642. Currently, writing "Fixes T..." in a comment gets picked up as a formal "fixes".
This is a bit confusing, and can also give you a "no effect" error if you "fixes ..." a task which is already "fixes"'d.
We could make the duplicate action a non-error, but just prevent the text from having an effect instead, which seems cleaner.
Test Plan:
- Wrote "Fixes ..." in a summary, saw a "fixes" relationship established.
- Wrote "Fixes ..." in a comment, got a "mention" instead.
- `var_dump()`'d some stuff as a sanity check, looked reasonable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12642
Differential Revision: https://secure.phabricator.com/D17805
Summary: Makes it more clear whose authority actions have been taken under.
Test Plan: {F4916376}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17741
Summary:
Previously, "reject" and "reject older" were separate statuses. Now, they're both shades of "reject".
Set the "older reject" flag properly when we find a non-current reject.
Test Plan:
- User A accepts a revision.
- User B rejects it.
- Author updates it.
- Before patch: incorrectly transitions to "accepted" ("older" reject is ignored).
- After patch: correctly transitions to "needs review".
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17653
Summary:
Ref T12509. Many of the calls to HMAC+SHA1 are just to compute cachekeys for remarkup objects.
Make these use HMAC+SHA256 instead. There is no downside to swapping these since they just cause a cache miss in the worst case.
I also plan to get rid of `PhabricatorMarkupInterface` eventually, but this doesn't go that far.
Test Plan: Browsed some different types of documents (tasks, legalpad documents, phame blogs / posts, pholio mocks, etc).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12509
Differential Revision: https://secure.phabricator.com/D17631
Summary:
Ref T12272. I wrote this correctly, then broke it by adding the simplification which treats "accept the defaults" as "accept everything".
This simplification lets us render "epriestley accepted this revision." instead of "epriestley accepted this revision onbehalf of: long, list, of, every, default, reviewer, they, have, authority, over." so it's a good thing, but make it only affect the reviewers it's supposed to affect.
Test Plan:
- Did an accept with a force-accept available but unchecked.
- Before patch: incorrectly accepted all possible reviewers.
- After patch: accepted only checked reviewers.
- Also checked the force-accept box, accepted, got a proper force-accept.
Reviewers: chad, lvital
Reviewed By: lvital
Maniphest Tasks: T12272
Differential Revision: https://secure.phabricator.com/D17634
Summary: Allow API callers to retrieve reviewer information via a new "reviewers" attachment.
Test Plan: {F4675784}
Reviewers: chad, lvital
Reviewed By: lvital
Subscribers: lvital
Differential Revision: https://secure.phabricator.com/D17633
The root issue here is actually just that I cherry-picked stable locally
but did not push it. However, this is a minor issue I also caught while
double-checking things.
Auditors: chad
Summary:
Ref T12464. This is a very old method which can return an existing file instead of creating a new one, if there's some existing file with the same content.
In the best case this is a bad idea. This being somewhat reasonable predates policies, temporary files, etc. Modern methods like `newFromFileData()` do this right: they share underlying data in storage, but not the actual `File` records.
Specifically, this is the case where we get into trouble:
- I upload a private file with content "X".
- You somehow generate a file with the same content by, say, viewing a raw diff in Differential.
- If the diff had the same content, you get my file, but you don't have permission to see it or whatever so everything breaks and is terrible.
Just get rid of this.
Test Plan:
- Generated an SSH key.
- Viewed a raw diff in Differential.
- (Did not test Phragment.)
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T12464
Differential Revision: https://secure.phabricator.com/D17617
Summary:
Ref T11357. When creating a file, callers can currently specify a `ttl`. However, it isn't unambiguous what you're supposed to pass, and some callers get it wrong.
For example, to mean "this file expires in 60 minutes", you might pass either of these:
- `time() + phutil_units('60 minutes in seconds')`
- `phutil_units('60 minutes in seconds')`
The former means "60 minutes from now". The latter means "1 AM, January 1, 1970". In practice, because the GC normally runs only once every four hours (at least, until recently), and all the bad TTLs are cases where files are normally accessed immediately, these 1970 TTLs didn't cause any real problems.
Split `ttl` into `ttl.relative` and `ttl.absolute`, and make sure the values are sane. Then correct all callers, and simplify out the `time()` calls where possible to make switching to `PhabricatorTime` easier.
Test Plan:
- Generated an SSH keypair.
- Viewed a changeset.
- Viewed a raw diff.
- Viewed a commit's file data.
- Viewed a temporary file's details, saw expiration date and relative time.
- Ran unit tests.
- (Didn't really test Phragment.)
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T11357
Differential Revision: https://secure.phabricator.com/D17616
Summary:
Fixes T12496. Sticky accept was accidentally impacted by the "void" changes in D17566.
Instead, don't always downgrade all accepts/rejects: on update, we only want to downgrade accepts.
Test Plan:
- With sticky accept off, updated an accepted revision: new state is "needs review".
- With sticky accept on, updated an accepted revision: new state is "accepted" (sticky accept working correctly).
- Did "reject" + "request review" to make sure that still works, worked fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12496
Differential Revision: https://secure.phabricator.com/D17605
Summary:
Ref T12272. If you own a package which owns "/", this allows you to force-accept package reviews for packages which own sub-paths, like "/src/adventure/".
The default UI looks something like this:
```
[X] Accept as epriestley
[X] Accept as Root Package
[ ] Force accept as Adventure Package
```
By default, force-accepts are not selected.
(I may do some UI cleanup and/or annotate "because you own X" in the future and/or mark these accepts specially in some way, particularly if this proves confusing along whatever dimension.)
Test Plan: {F4314747}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12272
Differential Revision: https://secure.phabricator.com/D17569
Summary: Ref T10967. This change is similar to D17566, but for rejects.
Test Plan:
- Create a revision as A, with reviewer B.
- Reject as B.
- Request review as A.
- Before patch: stuck in "rejected".
- After patch: transitions back to "needs review".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17568
Summary: Ref T10967. This moves all remaining "request review" pathways (just `differential.createcomment`) to the new code, and removes the old action.
Test Plan: Requested review on a revision, `grep`'d for the action constant.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17567
Summary:
Ref T10967. This is explained in more detail in T10967#217125
When an author does "Request Review" on an accepted revision, void (in the sense of "cancel out", like a bank check) any "accepted" reviewers on the current diff.
Test Plan:
- Create a revision with author A and reviewer B.
- Accept as B.
- "Request Review" as A.
- (With sticky accepts enabled.)
- Before patch: revision swithced back to "accepted".
- After patch: the earlier review is "voided" by te "Request Review", and the revision switches to "Review Requested".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17566
Summary:
Ref T11050. The old rule was "you can only resign if you're a reviewer".
With the new behavior of "resign", the rule should be "you can resign if you're a reviewer, or you have authority over any reviewer". Make it so.
Also fixes T12446. I don't know how to reproduce that but I'm pretty sure this'll fix it?
Test Plan:
- Could not resign from a revision with no authority/reviewer.
- Resigned from a revision with myself as a reviewer.
- Resigned from a revision with a package I owned as a reviewer.
- Could not resign from a revision I had already resigned from.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12446, T11050
Differential Revision: https://secure.phabricator.com/D17558
Summary: Ref T9363, If we're in a dashboard panel, only show buckets with data, or a fallback if nothing exists.
Test Plan: Test 'active revisions' panel in a dashboard and in Differential.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9363
Differential Revision: https://secure.phabricator.com/D17544
Summary:
Ref T12271. Don't do anything with this yet, but store who accepted/rejected/whatever on behalf of reviewers.
In the future, we could use this to render stuff like "Blessed Committers (accepted by epriestley)" or whatever. I don't know that this is necessarily super useful, but it's easy to track, seems likely to be useful, and would be a gigantic pain to backfill later if we decide we want it.
Test Plan: Accepted/rejected a revision, saw reviewers update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12271
Differential Revision: https://secure.phabricator.com/D17537
Summary:
Ref T12271. Currenty, when you "Accept" a revision, you always accept it for all reviewers you have authority over.
There are some situations where communication can be more clear if users can accept as only themselves, or for only some packages, etc. T12271 discusses some of these use cases in more depth.
Instead of making "Accept" a blanket action, default it to doing what it does now but let the user uncheck reviewers.
In cases where project/package reviewers aren't in use, this doesn't change anything.
For now, "reject" still acts the old way (reject everything). We could make that use checkboxes too, but I'm not sure there's as much of a use case for it, and I generally want users who are blocking stuff to have more direct accountability in a product sense.
Test Plan:
- Accepted normally.
- Accepted a subset.
- Tried to accept none.
- Tried to accept bogus reviewers.
- Accepted with myself not a reviewer
- Accepted with only one reviewer (just got normal "this will be accepted" text).
{F4251255}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12271
Differential Revision: https://secure.phabricator.com/D17533
Summary: Hit this while `arc diff`'ing something which is triggering 2+ rules which add reviewers, I think.
Test Plan: Dug this out of a production stack trace; will push and `arc diff` again.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17534
Summary:
Ref T10967. I'm not 100% sure we need this, but the old edge table had it and I recall an issue long ago where not having this key left us with a bad query plan.
Our data doesn't really provide a way to test this key (we have many revisions and few reviewers, so the query planner always uses revision keys), and building a convincing test case would take a while (lipsum needs some improvements to add reviewers). But in the worst case this key is mostly useless and wastes a few MB of disk space, which isn't a big deal.
So I can't conclusively prove that this key does anything to the dashboard query, but the migration removed it and I'm more comfortable keeping it so I'm not worried about breaking stuff.
At the very least, MySQL does select this key in the query plan when I do a "Reviewers:" query explicitly so it isn't //useless//.
Test Plan: Ran `bin/storage upgrade`, ran dashboard query, the query plan didn't get any worse.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17532
Summary:
Fixes T11050. Today, when a user resigns, we just delete the record of them ever being a reviewer.
However, this means you have no way to say "I don't care about this and don't want to see it on my dashboard" if you are a member of any project or package reviewers.
Instead, store "resigned" as a distinct state from "not a reviewer", and treat it a little differently in the UI:
- On the bucketing screen, discard revisions any responsible user has resigned from.
- On the main `/Dxxx` page, show these users as resigned explicitly (we could just hide them, too, but I think this is good to start with).
- In the query, don't treat a "resigned" state as a real "reviewer" (this change happened earlier, in D17517).
- When resigning, write a "resigned" state instead of deleting the row.
- When editing a list of reviewers, I'm still treating this reviewer as a reviewer and not special casing it. I think that's sufficiently clear but we could tailor this behavior later.
Test Plan:
- Resigned from a revision.
- Saw "Resigned" in reviewers list.
- Saw revision disappear from my dashboard.
- Edited revision, saw user still appear as an editable reviewer. Saved revision, saw no weird side effects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11050
Differential Revision: https://secure.phabricator.com/D17531
Summary:
Ref T10967. Improves some method names:
- `Revision->getReviewerStatus()` -> `Revision->getReviewers()`
- `Revision->attachReviewerStatus()` -> `Revision->attachReviewers()`
- `Reviewer->getStatus()` -> `Reviewer->getReviewerStatus()` (this is mostly to make this more greppable)
Test Plan:
- bunch o' `grep`
- Browsed around.
- If I missed anything, it should fatal in an obvious way. We have a lot of other `getStatus()` calls and it's hard to be sure I got them all.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17522
Summary: Ref T10967. The old name was because we had a `getReviewers()` tied to `needRelationships()`, rename this method to use a simpler and more clear name.
Test Plan: `grep`, browsed around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17519
Summary:
Ref T10967. There have been two different ways to load reviewers for a while: `needReviewerStatus()` and `needRelationships()`.
The `needRelationships()` stuff was a false start along time ago that didn't really go anywhere. I believe the idea was that we might want to load several different types of edges (subscribers, reviewers, etc) on lots of different types of objects. However, all that stuff pretty much ended up modularizing so that main `Query` classes did not need to know about it, so `needRelationships()` never got generalized or went anywhere.
A handful of things still use it, but get rid of them: they should either `needReviewerStatus()` to get reviewer info, or the ~3 callsites that care about subscribers can just load them directly.
Test Plan:
- Grepped for removed methods (`needRelationships()`, `getReviewers()`, `getCCPHIDs()`, etc).
- Browsed Diffusion, Differential.
- Called `differential.query`.
It's possible I missed some stuff, but it should mostly show up as super obvious fatals ("call needReviewerStatus() before getReviewerStatus()!").
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17518
Summary:
Ref T10967.
When we query for revisions with particular reviewers, use the new table to drive the query.
When we load revisions for use in the application, also use the new table to drive the query.
This doesn't convert everything: there's some old `loadRelationships()` stuff still using the old table. But this moves the major stuff over.
(This also changes the icon for "commented" from a question mark to a speech bubble.)
Test Plan:
- Viewed revision lists and detail views on old and new code, saw identical outcomes.
- Updated revisions, accepted/rejected/commented on revisions.
- Hit the "Accepted Older" and "Commented Older" states by taking an action and then updating.
- Grepped for removed methods (like `getEdgeData()` and `getDiffID()`).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17517
Summary:
Ref T10967. We have a "commented" state to help reviewers get a better sense of who is part of a discussion, and a "last action" state to help distinguish between "accept" and "accepted an older version", for the purposes of sticky accepts and as a UI hint.
Currently, these are first-class states, partly beacuse we were somewhat limited in what we could do with edges. However, a more flexible way to represent them is as flags separate from the primary state flag.
In the new storage, write them as separate state information: `lastActionDiffPHID` stores the Diff PHID of the last review action (accept, reject, etc). `lastCommentDiffPHID` stores the Diff PHID of the last comment (top-level or inline).
Test Plan: Applied storage changes, commented and acted on a revision. Saw appropriate state reflected in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17514
Summary:
Ref T10967. `differential.createcomment` is a frozen API method which has been obsoleted by `differential.revision.edit`.
It is the only remaining way to apply an "accept", "reject", or "resign" action using the old "ACTION" code.
Instead of using the old code, sneakly apply a new type of transaction in these cases instead.
Then, remove all the remaining old code for this stuff on the write pathways.
Test Plan:
- Used "differential.createcomment" to accept, reject, and resign from a revision.
- Grepped for all removed ACTION_X constants, found them only in rendering code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17513
Summary: Ref T10967. See that task for some discussion. This lets us do double writes on this pathway.
Test Plan: Set an Owners package to auto-review. Created revisions which triggered it: one with no reviewers (autoreview added); one with the package as a blocking reviewer explicitly (no automatic stuff happened, as expected).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17512
Summary:
Ref T10967. This converts the reviewer update action in Herald from an older edge write to a newer ModularTransactions write.
The major value from this is that we get a double-write to the new reviewers table.
Test Plan:
- Wrote a Herald rule to add a reviewer and a blocking reviewer.
- Saw them added properly to a revision with: no reviewers; both as blocking; A as blocking, B as nonblocking; A as nonblocking, B as blocking.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17511
Summary:
Ref T5378. This repackages an existing check to see if a URI is a URI for the current install into a more reasonable form.
In an upcoming change, I'll use this new check to test whether `http://example.whatever.com/T123` is a link to a task on the current install or not.
Test Plan: This stuff has good test coverage already; added some more.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5378
Differential Revision: https://secure.phabricator.com/D17502
Summary:
Via HackerOne. When you view a raw file in Differential, we currently generate a permanent file with default permissions. This may be incorrect: default permissions may be broader than the diff's permissions.
The other three methods of downloading/viewing raw files ("Download" in Diffusion and Differential, "View Raw" in Diffusion and Differential) already apply policies correctly and generate temporary files. However, this workflow was missed when other workflows were updated.
Beyond updating the workflow, delete any files we've generated in the past. This wipes the slate clean on any security issues and frees up a little disk space.
Test Plan:
- Ran migration script, saw existing files get purged.
- Did "View Raw File", got a new file.
- Verified that the file was temporary and properly attached to the diff, with "NO ONE" permissions.
- Double-checked that Diffusion already runs policy logic correctly and applies appropriate policies.
- Double-checked that "Download Raw Diff" in Differential already runs policy logic correctly.
- Double-chekced that "Download Raw Diff" in Diffusion already runs policy logic correctly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17504
Summary:
Ref T10967. This is an incremental step toward removing "reviewers" back to a dedicated storage table so we can handle changes like T11050.
This adds the storage table, and starts doing double writes to it (so new or updated reviewers write to both the old edge table and the new "reviewers" table).
Then we can do a migration, swap readers over one at a time, and eventually remove the old write and old storage and then implement new features.
This change has no user-facing impact, it just causes us to write new data to two places instead of one.
This is not completely exhaustive: the Herald "Add Reviewers" action is still doing a manual EDGE transaction. I'll clean that up next and do another pass to look for anything else I missed.
This is also a bit copy/pastey for now but the logic around "RESIGN" is a little different in the two cases until T11050. I'll unify it in future changes.
Test Plan:
- Did a no-op edit.
- Did a no-op comment.
- Added reviewers.
- Removed reviewers.
- Accepted and rejected revisions.
After all of these edits, did a `SELECT * FROM differential_reviewer` manually and saw consistent-looking rows in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17495
Summary:
Ref T12335. Fixes T11207. Edit-like interactions which are not performed via "Edit <object>" are a bit of a grey area, policy-wise.
For example, you can correctly do these things to an object you can't edit:
- Comment on it.
- Award tokens.
- Subscribe or unsubscribe.
- Subscribe other users by mentioning them.
- Perform review.
- Perform audit.
- (Maybe some other stuff.)
These behaviors are all desirable and correct. But, particularly now that we offer stacked actions, you can do a bunch of other stuff which you shouldn't really be able to, like changing the status and priority of tasks you can't edit, as long as you submit the change via the comment form.
(Before the advent of stacked actions there were fewer things you could do via the comment form, and more of them were very "grey area", especially since "Change Subscribers" was just "Add Subscribers", which you can do via mentions.)
This isn't too much of a problem in practice because we won't //show// you those actions if the edit form you'd end up on doesn't have those fields. So on intalls like ours where we've created simple + advanced flows, users who shouldn't be changing task priorities generally don't see an option to do so, even though they technically could if they mucked with the HTML.
Change this behavior to be more strict: unless an action explicitly says that it doesn't need edit permission (comment, review, audit) don't show it to users who don't have edit permission and don't let them take the action.
Test Plan:
- As a user who could not edit a task, tried to change status via comment form; received policy exception.
- As a user who could not edit a task, viewed a comment form: no actions available (just "comment").
- As a user who could not edit a revision, viewed a revision form: only "review" actions available (accept, resign, etc).
- Viewed a commit form but these are kind of moot because there's no separate edit permission.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12335, T11207
Differential Revision: https://secure.phabricator.com/D17452
Summary:
Fixes T12322. Allows you to search for commits using the `tagged(...)` repository function, so you can find "any commmit in any repository tagged with android" or similar.
I moved the function from Differential (which was the application using it) to Diffusion (which is more accurately the application which provides it).
I fixed a bug where searching for `tagged(xyz)` would have no effect (constraint was ignored) if there were no repositories tagged with "xyz". The fix isn't perfectly clean, but should work properly for the moment.
Test Plan:
- Searched with `tagged(...)` in Diffusion and Differential.
- Searched by repository.
- Searched with `tagged(...)` for a project with no tagged repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12322
Differential Revision: https://secure.phabricator.com/D17426
Summary:
Ref T12319. Currently, `bin/lipsum` uses substring matches against human-readable text to chose which objects to generate.
Instead:
- Use separate selector keys which are guaranteed to be unique.
- When a match is exact, select only that generator.
- When a match is ambiguous, fail and warn the user.
Test Plan: Generated several types of objects, tried to generate ambiguous objects like "e".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12319
Differential Revision: https://secure.phabricator.com/D17420
Summary: Ref T12319. The product name is misspelled in some methods, and a few places in the documentation.
Test Plan: `grep`
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12319
Differential Revision: https://secure.phabricator.com/D17419
Summary:
Fixes T12172. Fixes T12060. This allows runtime code building CSS for mail to read CSS variables, then makes all the code do that.
It reverts the non-colorblind red/green to the colors in use before T12060, which seem better for non-colorblind users since no one really complained?
Test Plan:
- Viewed code diffs in Web UI.
- Viewed prose diffs in Web UI.
- Viewed code diffs in email.
- Viewed prose diffs in email.
All modes respected the accessibility color scheme.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12172, T12060
Differential Revision: https://secure.phabricator.com/D17269
Summary:
Fixes T12197. I //think// this field was never recognized by Differential (it doesn't appear in D17070, but maybe that isn't the right change).
It was recognized by the ad-hoc regular expression which I replaced with a formal parser in D17262.
Allow the former parser to accept "Auditor" as an alias for "Auditors".
Test Plan: Committed a change with `Auditor: dog`, saw the audit trigger correctly in the web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12197
Differential Revision: https://secure.phabricator.com/D17306
Summary:
Ref T12173.
- If we want to fetch a tag, Buildkite needs it as a "branch" (this means more like "ref to fetch").
- The API gets upset if we pass "refs/tags/...", so just pass the tag name without the prefix, which works.
- Do a better job with commits and pass a real branch to fetch.
Test Plan:
- Built a commit with Buildkite.
- Build a revision with Buildkite.
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12173
Differential Revision: https://secure.phabricator.com/D17282
Summary:
Ref T10978. Updates how we implement "Auditors: ..." in commit messages:
- Use the same parsing code as everything else.
- (Also: parse package names.)
- Use the new transaction code.
Also, fix some UI strings.
Test Plan: Used `bin/repository reparse --herald <commit>` to re-run this code on commits with various messages (valid Auditors, invalid Auditors, no Auditors). Saw appropriate auditors added in the UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17262
Summary:
Ref T11114. Converting to EditEngine caused us to stop running this validation, since these fields no longer subclass this parent. Restore the validation.
Also, make sure we check the //first// line of the value, too. After the change to make "Tests: xyz" a valid title, you could write silly summaries / test plans and escape the check if the first line was bogus.
Test Plan: {F2493228}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17248
Summary: Ref T12136. This just yanks the band-aid off. Fundamentally these were useful well before Dashboards and advanced bucketing, but not so much any more. They also have some performance hit.
Test Plan: Add some tasks and diffs onto a new instance, see there is no count on the home menu bar.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12136
Differential Revision: https://secure.phabricator.com/D17238
Summary:
To set this up:
- alice accepts a revision.
- Something adds a package or project she has authority over as a reviewer.
- Because alice has already accepted, she can not re-accept, but she should be able to (in order to accept on behalf of the new project or package).
Test Plan:
- Created a revision.
- Accepted as user "dog".
- Added "dog project".
- Re-accepted.
- Could not three-accept.
- Removed "dog project.
- Rejected.
- Added "dog project".
- Re-rejected.
- Could not three-reject.
Reviewers: chad, eadler
Reviewed By: chad, eadler
Differential Revision: https://secure.phabricator.com/D17226
Summary: Fixes T6660. Uses the new stuff in Audit to build an EditEngine-aware icon.
Test Plan: {F2364304}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6660
Differential Revision: https://secure.phabricator.com/D17208
Summary:
Ref T11114. Ref T12085. I missed a few pieces of cleanup when moving all this stuff over.
In particular, load all fields which use Custom Field storage before doing commit-message-related stuff, instead of just the ones that claim they appear on commit messages.
Test Plan: Edited revisions and made API calls without apparent issues. See followup on T12085, shortly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12085, T11114
Differential Revision: https://secure.phabricator.com/D17207
Summary:
Fixes T12095. Ref T6660. The old code for this was specific to Differential, using the `DifferentialDraft` table.
Instead, make the `EditEngine` / `VersionedDraft` code create and remove a `<objectPHID, authorPHID>` edge when a particular author creates drafts.
Some applications have drafts beyond `VersionedDrafts`, notably inline comments. Before writing "yes, draft" or "no, no draft", ask the object if it has any custom draft stuff we need to know about.
This should fix all the yellow bubble bugs I created in T11114 and allow us to bring the feature to Audit fairly easily.
Test Plan: Created and deleted comments and inlines, reloading the list view after each change. Couldn't find a way to break the list view anymore.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12095, T6660
Differential Revision: https://secure.phabricator.com/D17205
Summary:
Ref T12098.
We have two methods (`supportsEditEngineConfiguration()` and `isEngineConfigurable()`) which sort of do the same thing and probably should be merged.
For now, just swap which one we override to get "Create Revision" out of the Quick Create menu.
Test Plan: No more "Create Revision" in Quick Create menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12098
Differential Revision: https://secure.phabricator.com/D17204
Summary:
Fixes T7076. This could probably use some tweaking but should get the basics in place.
This shows overall object state (e.g., "Needs Review"), not individual viewer state (e.g., "you need to review this"). After the bucketing changes it seems like we're mostly in a reasonable place on showing global state instead of viewer state. This makes the overall change much easier than it might otherwise have been.
Test Plan: {F2351867}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7076
Differential Revision: https://secure.phabricator.com/D17193
Summary: Ref T11114. Ref T10978. These hadn't made it over to EditEngine yet.
Test Plan:
- Took various actions on revisions and commits.
- Used `bin/mail show-outbound --id ...` to examine the "Vary Subject", saw it properly generate "[Accepted]", "[Resigned]", etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114, T10978
Differential Revision: https://secure.phabricator.com/D17191
Summary:
Fixes T12092. D17164 made `DiffQuery` more strict about arguments using modern conventions, but `differential.querydiffs` uses bizarre ancient conventions.
Give it more modern conventions instead.
Test Plan: Made a `querydiffs` call with only revision IDs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12092
Differential Revision: https://secure.phabricator.com/D17172
Summary: Fixes T12086. This got dropped by accident while cleaning up haunting.
Test Plan: Loaed a revision, hit "?", hit n/j/p/etc
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12086
Differential Revision: https://secure.phabricator.com/D17166
Summary:
Fixes T10968. In rare situations, we can generate a diff, then hit an error which causes this update to fail.
When it does, we tend to get stuck in a loop creating diffs, which can fill the database up with garbage. We saw this once in the Phacility cluster, and one instance hit it, too.
Instead: when we create a diff, keep track of which commit we generated it from. The next time through, reuse it if we already built it.
Test Plan:
- Used `bin/differential attach-commit <commit> <revision>` to hit this code.
- Simulated a filesystem write failure, saw the diff get reused.
- Also did a normal update, which worked properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10968
Differential Revision: https://secure.phabricator.com/D17164
Summary: Ref T11114. After evaluating typeahead tokens, we could process blocking reviewer removals incorrectly: we may get structures back.
Test Plan: Removed blocking reviewers from the web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17163
Summary:
Ref T12074. The "v3" API methods (`*.search`, `*.edit`) are currently marked as "unstable", but they're pretty stable and essentially all new code should be using them.
Although these methods are seeing some changes, almost all changes are additive (support for new constraints or attachemnts) and do not break backward compatibility. We have no major, compatibility-breaking changes planned.
I don't want to mark the older methods "deprecated" yet since `arc` still uses a lot of them and there are some capabilities not yet available on the v3 methods, but introduce a new "frozen" status with pointers to the new methods.
Overall, this should gently push users toward the newer methods.
Test Plan: {F2325323}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12074
Differential Revision: https://secure.phabricator.com/D17158
Summary:
Ref T11114. When you comment, we try to upgrade your review status to "commented".
This can conflict with upgrading it to "accepted" or "rejected", or removing it entirely.
For now, just avoid making this update. After T10967, I expect "you commented" to be orthogonal to accepted/rejected so it should stop conflicting on its own.
Test Plan:
- As an "added" reviewer, accepted a revision with a comment in the same transaction.
- Before patch: accept didn't stick.
- After patch: accept sticks.
This may be somewhat magical/order-dependent but I was able to reproduce it locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17146
Summary: Minor color saturation here, ideal for low quality monitors.
Test Plan:
Review new colors in various scenarios.
{F2305178}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17141
Summary:
Fixes T10136. This reinforces ongoing or failed builds in the comment action area.
We already emit a similar message for unit test failures from `arc unit`. This should probably obsolete that, eventually.
Test Plan:
{F2304809}
{F2304810}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10136
Differential Revision: https://secure.phabricator.com/D17140
Summary:
Fixes T9276. Fixes T8650. The story so far:
- We once published build updates to Revisions.
- An unrelated fix (D10911) sent them to the Diffs instead of Revisions, which isn't useful, since you can't see a diff's timeline anywhere.
- This also caused a race condition, where the RevisionEditor and DiffEditor would update the diff simultaneously (T8650).
- The diff update was just disabled to avoid the race (part of D13441).
- Instead, allow the updates to go somewhere else. In this case, we send commit updates to the commit but send diff updates to the revision so you can see 'em.
- Since everything will be using the revision editor now, we should either get proper lock behavior for free or it should be easy to add if something whack is still happening.
- Overall, this should pretty much put us back in working order like we were before D10911.
This behavior is undoubtedly refinable, but this should let us move forward.
Test Plan:
Saw a build failure in timeline:
{F2304575}
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T9276, T8650
Differential Revision: https://secure.phabricator.com/D17139
Summary: Ref T11114. Move email/command actions, like "!reject", to modular transactions + editengine.
Test Plan: Used `bin/mail receive-test` to pipe "!stuff" to an object, saw appropraite effects in web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17133
Summary:
Ref T11114. When a user selects "Accept", and then selects "Reject", remove the "Accept". It does not make sense to both accept and reject a revision.
For now, every one of the "actions" conflicts: accept, reject, resign, claim, close, commandeer, etc, etc. I couldn't come up with any combinations that it seems like users are reasonably likely to want to try, and we haven't received combo-action requests in the past that I can recall.
Test Plan:
- Selected "Accept", then selected "Reject". One replaced the other.
- Selected "Accept", then selected "Change Subscribers". Both co-existed happily.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17132
Summary:
Fixes T9648. Diffs currently use `return $this->getRevision()->getViewPolicy();` to inherit their revision's view policy.
After the introduction of object policies, this is wrong for policies like "Subscribers", because it means "Subscribers to this object, the diff". Since Diffs have no subscribers, this always fails.
Instead, use extended policies so that the object policy evaluates in the context of the correct object (the revision).
Test Plan:
- Create a revision.
- Subscribe `alice` to it.
- Set view policy to "Subscribers".
- View revision as `alice`.
- Before patch: nonsense fatal about missing diff because of policy error.
- After patch: `alice` can see the revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9648
Differential Revision: https://secure.phabricator.com/D17123
Summary: Fixes T10312. If your first line is "Reviewers: xyz", it's a title, not a "Reviewers" field.
Test Plan: Added unit test.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10312
Differential Revision: https://secure.phabricator.com/D17122
Summary:
Fixes T8360. We will now parse revisions out of "Differential Revision: X" followed by other ad-hoc fields which we do not recognize. Previously, these fields would be treated as part of the value.
(In the general case, other fields may line wrap so we can't assume that fields are only one line long. However, we can make that assumption safely for this field.)
Also maybe fix whatever was going on in T9965 although that didn't really have a reproduction case.
Test Plan: Added unit tests.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8360
Differential Revision: https://secure.phabricator.com/D17121
Summary: Ref T11114. Fixes T10323.
Test Plan:
- Marked comments as done only: no warning about not leaving a comment.
- Did nothing: warning about posting an empty comment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114, T10323
Differential Revision: https://secure.phabricator.com/D17120
Summary: Ref T11114. Although I plan to rewrite this system eventually (T10448) it's easy enough to punt for now.
Test Plan: punt
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17119
Summary:
Ref T11114. This restores:
- Commandeering should exeucte Herald.
- Commandeering should swap reviewers.
- "Request Review" on an "Accepted" revision should downgrade reviewers so they have to accept again.
Test Plan:
- Commandeered, saw Herald run and reviewers swap.
- Requested review of an accepted revision, saw it drop down to "Needs Review" with "Accepted Prior" on the reviewer.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17118
Summary: Ref T11114. This restores warnings (e.g., failing unit tests) and fixes "Quote" behavior for comments.
Test Plan:
- Quoted a comment.
- Viewed a warning.
{F2283275}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17117
Summary: Ref T11114. This comments nearly working on EditEngine. Only significant issue I caught is that the "View" link doesn't render properly because it depends on JS which is tricky to hook up. I'll clean that up in a future diff.
Test Plan: {F2279201}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17116
Summary:
Ref T11114. See D17114 for some discussion.
For review actions: accept, reject, resign.
For revision actions, order is basically least-severe to most-severe action pairs: plan changes, request review, close, reopen, abandon, reclaim, commandeer.
Test Plan: Viewed revisions as an author and a reviewer, saw sensible action order within action groups.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17115
Summary:
Ref T11114. Differential has more actions than it once did, and may have further actions in the future.
Make this dropdown a little easier to parse by grouping similar types of actions, like "Accept" and "Reject".
(The action order still needs to be tweaked a bit.)
Test Plan: {F2274526}
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17114
Summary:
Ref T11114. Some rough edges, but this largely makes Accept, Reject and Resign work in the new EditEngine comment area.
Ref T11050. This lays a little bit of groundwork for having "resign" mean "I don't want to review this, even if projects or packages I'm a member of need to", not just "remove me personally as a user reviewer".
Test Plan: Accepted, rejected and resigned from revisions without any major state issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114, T11050
Differential Revision: https://secure.phabricator.com/D17113
Summary:
Ref T11114. This has two pieces of side-effect logic which I've noted locally:
- Commandeer needs to apply Herald rules.
- Commandeer needs to move the old author to become a reviewer and remove
the actor as a reviewer.
Test Plan: Commandeered some revisions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17111
Summary:
Ref T11114. This restores these actions.
One behavior is incomplete: "Request Review" on an accepted revision does not downgrade reviewers properly. I've noted this locally.
Test Plan: Planned changes and requested review of a revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17109
Summary:
Ref T11114. This restores these actions as selectable in the comment area.
This does not implement one special rule ("Closing a revision in response to a commit is OK from any status.") but I have a note about that separately.
Test Plan: Closed and reopened revisions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17108
Summary: Ref T11114. This begins restoring comment actions to Differential, but on top of EditEngine.
Test Plan: {F2263148}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17107
Summary:
Ref T11114. This is a transitional change that breaks a bunch of stuff. I'll hold it until I've restored features.
This stuff works:
- Commenting.
- Subscribers/tags/reviewers.
- Pinning.
- Drafts.
This stuff does not work yet:
- Preview of inline comments.
- Probably submitting inlines, whatsoever.
- Comment-area warnings like "There are failing tests."
- All meaningful actions (accept, reject, etc).
Test Plan: Commented on a revision. Essentially nothing else works yet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17106
Summary: See D17058.
Test Plan: Ran `arc diff`, which parsed fields as a side effect.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17112
Summary: Ref T11114. We seem to be in reasonable shape here and I don't think anything needs to revert, so rename this back to boring old "edit".
Test Plan: Created, updated, edited a revision via web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17091
Summary: Ref T11114. This is still mostly in use, but toss a few commit message parsing things.
Test Plan: Viewed/edited/upated blame rev from CLI/web UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17089
Summary:
Ref T11114. Keep UI, throw everything else away.
Includes an imperfect-but-not-too-awful fix to keep the field actually working.
Test Plan: Edited tasks from CLI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17088
Summary: Ref T11114. Keep mail and UI, toss the rest.
Test Plan: Edited/viewed repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17087
Summary: Ref T11114. Keep rendering and mail, toss the rest.
Test Plan: Edited and viewed reviewers.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17086
Summary: Ref T11114. Keep UI stuff and mail stuff, toss editing.
Test Plan: Viewed and edited revision summaries.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17085
Summary: Ref T11114. This leaves mail integration and UI integration, but strips all the editing (now handled by EditEngine) and commit message stuff (now handled by CommitMessageField).
Test Plan: Viewed and edited test plans and test plan transactions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17084
Summary: Ref T11114. Obsoleted by Modular Transactions + EditEngine + CommitMessageField + we just "hard code" the title of revisions into the page because we're craaazy.
Test Plan:
- Made an edit on `stable`.
- Viewed the edit on this change, it still had the proper UI strings.
- Edited/created/updated revisions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17083
Summary: Ref T11114. Obsoleted by EditEngine.
Test Plan: Edited the view policy of a revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17082
Summary: Ref T11114. This is obsoleted by `DifferentialSubscribersCommitMessageField` and EditEngine.
Test Plan: Edited a revision's subscribers.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17081
Summary: Ref T11114. Obsoleted by `DifferentialRevisionIDCommitMessageField`.
Test Plan:
- Grepped for removed class.
- Created a new revision, verified that the amended message included a proper revision ID.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17080
Summary: Ref T11114. This is replaced by `DifferentialReviewedByCommitMessageField.php`.
Test Plan:
- Used `differential.getcommitmessage` to query an accepted revision, saw "Reviewed By".
- Grepped for removed class name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17079
Summary: Ref T11114. This is entirely obsoleted by EditEngine.
Test Plan: Edited projects on a revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17078
Summary: Ref T11114. This was obsoleted by UI changes and hacked around for performance in T11404. It no longer does anything.
Test Plan: Grepped for removed class name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17077
Summary: Ref T12027. This is purely a UI hint for new users that I'd like to integrate into "Land Revision" in the future instead.
Test Plan: Grepped for removed class, browsed Differential.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12027
Differential Revision: https://secure.phabricator.com/D17076
Summary: Ref T11114. This is obsolted by the narrower `DifferentialGitSVNIDCommitMessageField`.
Test Plan: Browsed around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17075
Summary: Ref T11114. This is now entirely handled by EditEngine and standard policy code.
Test Plan: Edited the edit policy of a revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17074
Summary: Ref T11114. This is a pure paring field and now entirely handled by `DifferentialConflictsCommitMessageField`.
Test Plan: Grepped for removed class name.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17073
Summary: Ref T11114. This was obsoleted by the "Stack" graph and does nothing.
Test Plan: Viewed revisions, still saw dependency graphs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114
Differential Revision: https://secure.phabricator.com/D17072
