1
0
Fork 0
mirror of https://we.phorge.it/source/phorge.git synced 2024-12-25 15:00:58 +01:00
Commit graph

14966 commits

Author SHA1 Message Date
epriestley
159fd44203 Correct transaction strengths after inconsitent scaling by 100 vs 1000
Summary:
See D20540. I mistakenly multiplied some strenghts by 100 and others by 1000 when converting them to integers for `PhutilSortVector`.

Multiply them all by 100 (that is, divide the ones which were multiplied by 1000 by 10) to put things back the way they were.

Test Plan: quick mafs

Reviewers: amckinley, richardvanvelzen

Reviewed By: richardvanvelzen

Differential Revision: https://secure.phabricator.com/D20622
2019-06-26 07:19:33 -07:00
epriestley
987e104610 Bump the remarkup cache version after JIRA/Asana rule changes
Summary: See PHI1319. Ref T13291. Bump the remarkup cache version, since the old JIRA / Asana rules may exist in the partial cached representation of remarkup blocks from older versions.

Test Plan: Typed some comments with various formatting, saw remarkup work fine.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13291

Differential Revision: https://secure.phabricator.com/D20619
2019-06-25 14:56:29 -07:00
epriestley
eaa60334ec Limit the read buffer size in bin/storage dump
Summary:
Ref T13328. Currently, we read from `mysqldump` something like this:

```
until (done) {
  for (100 ms) {
    mysqldump > in-memory-buffer;
  }

  in-memory-buffer > disk;
}
```

This general structure isn't great. In this use case, where we're streaming a large amount of data from a source to a sink, we'd prefer to have a "select()"-like way to interact with futures, so our code is called after every read (or maybe once some small buffer fills up, if we want to do the writes in larger chunks).

We don't currently have this (`FutureIterator` can wake up every X milliseconds, or on future exit, but, today, can not wake for readable futures), so we may buffer an arbitrary amount of data into memory (however much data `mysqldump` can write in 100ms).

Reduce the update frequency from 100ms to 10ms, and limit the buffer size to 32MB. This effectively imposes an artificial 3,200MB/sec limit on throughput, but hopefully that's fast enough that we'll have a "wake on readable" mechanism by the time it's a problem.

Test Plan:
  - Replaced `mysqldump` with `cat /dev/zero` as the source command, to get fast input.
  - Ran `bin/storage dump` with `var_dump()` on the buffer size.
  - Before change: saw arbitrarily large buffers (300MB+).
  - After change: saw consistent maximum buffer size of 32MB.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13328

Differential Revision: https://secure.phabricator.com/D20617
2019-06-25 07:17:14 -07:00
epriestley
da0dfc057d Make "bin/files" parsing of working set arguments more consistent
Summary:
Fixes T13326. In D20571, I slightly generalized construction of an iterator over a set of files, but missed some code in other "bin/files ..." commands which was also affected.

Today, basically all of these workflows define their own "--all" and "names" flags. Pull these definitions up and implement them more consistently.

Test Plan: Ran multiple different `bin/files` commands with different combinations of arguments, saw consistent handling of iterator construction.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13326

Differential Revision: https://secure.phabricator.com/D20614
2019-06-24 16:02:39 -07:00
epriestley
a3397fb876 Consider "all account members are disabled" to be a permanent failure when billing a Phortune subscription
Summary:
Fixes T13327. Currently, when we try to bill an account and all members are disabled, we fail temporarily and the task retries forever.

At least for now, just treat this as a permanent failure.

Test Plan:
  - Used `bin/phortune invoice` to generate a normal invoice for a regular subscription.
  - Disabled all the account members, then tried again. Got a helpful permanent failure:

```
$ ./bin/phortune invoice --subscription PHID-PSUB-kbedwt5cyepoc6tohjq5 --auto-range
Set current time to Mon, Jun 24, 2:47 PM.
Preparing to invoice subscription "localb.phacility.com" from Fri, May 31, 10:14 AM to Sun, Jun 30, 10:14 AM.
 WARNING
Manually invoicing will double bill payment accounts if the range overlaps an
existing or future invoice. This script is intended for testing and
development, and should not be part of routine billing operations. If you
continue, you may incorrectly overcharge customers.

    Really invoice this subscription? [y/N] y

[2019-06-24 14:47:57] EXCEPTION: (PhabricatorWorkerPermanentFailureException) All members of the account ("PHID-ACNT-qp54y3unedoaxgkkjpj4") for this subscription ("PHID-PSUB-kbedwt5cyepoc6tohjq5") are disabled. at [<phabricator>/src/applications/phortune/worker/PhortuneSubscriptionWorker.php:88]
arcanist(head=experimental, ref.master=d92fa96366c0, ref.experimental=db4cd55d4673), corgi(head=master, ref.master=6371578c9d32), instances(head=stable, ref.master=ba9e4a19df1c, ref.stable=37fb1f4917c7), libcore(), phabricator(head=master, ref.master=65bc481c91de, custom=11), phutil(head=master, ref.master=7adfe4e4f4a3), services(head=master, ref.master=5424383159ac)
  #0 PhortuneSubscriptionWorker::doWork() called at [<phabricator>/src/infrastructure/daemon/workers/PhabricatorWorker.php:124]
  #1 PhabricatorWorker::executeTask() called at [<phabricator>/src/infrastructure/daemon/workers/PhabricatorWorker.php:163]
  #2 PhabricatorWorker::scheduleTask(string, array, array) called at [<phabricator>/src/applications/phortune/management/PhabricatorPhortuneManagementInvoiceWorkflow.php:169]
  #3 PhabricatorPhortuneManagementInvoiceWorkflow::execute(PhutilArgumentParser) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:457]
  #4 PhutilArgumentParser::parseWorkflowsFull(array) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:349]
  #5 PhutilArgumentParser::parseWorkflows(array) called at [<phabricator>/scripts/setup/manage_phortune.php:21]
$
```

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13327

Differential Revision: https://secure.phabricator.com/D20613
2019-06-24 15:29:31 -07:00
epriestley
65bc481c91 Remove "phd.pid-directory" configuration and stop passing "piddir" to daemons
Summary: Ref T13321. The daemons no longer write PID files, so we no longer need to pass any of this stuff to them.

Test Plan: Grepped for affected symbols.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13321

Differential Revision: https://secure.phabricator.com/D20608
2019-06-24 11:28:58 -07:00
epriestley
2498e373b9 Make "phd start" and "phd reload" use the process list, not PID files
Summary:
Ref T13321. This gets rid of the last pidfile readers in Phabricator; we just use the process list instead.

These commands always only work on the current instance since they don't make much sense otherwise.

Test Plan: Ran `bin/phd start` and `bin/phd reload` with and without daemons running.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13321

Differential Revision: https://secure.phabricator.com/D20606
2019-06-24 11:27:25 -07:00
epriestley
08b9e70bea Make "bin/phd status" report local daemons from the process list, not a mess of local/remote information
Summary:
Ref T13321. Fixes T11037. Realign "bin/phd status" to just mean "show daemon processes on this host".

The value of `bin/phd status` as a mixed remote/local command isn't clear, and the current output is a confusing mess (see T11037).

This also continues letting us move away from PID files.

Test Plan: Ran `bin/phd status`, saw sensible local process status.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13321, T11037

Differential Revision: https://secure.phabricator.com/D20604
2019-06-24 11:25:53 -07:00
epriestley
b99c240aa3 Deprecate "bin/phd ... --gently" and update documentation
Summary:
Ref T13321. Previously, the behavior was:

  - `bin/phd stop --gently`: Stop all daemons with PID files that belong to the current instance.
  - `bin/phd stop`: Stop all daemons with PID files that belong to the current instance. Complain if there are more processes.
  - `bin/phd stop --force`: Stop all processes that look like daemons, ignoring instances.

The new behavior is:

  - `bin/phd stop`: Stop all processes that look like daemons and belong to the current instance.
  - `bin/phd stop --force`: Stop all processes that look like daemons, period.

Test Plan: Grep / documentation only.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13321

Differential Revision: https://secure.phabricator.com/D20602
2019-06-24 11:16:00 -07:00
epriestley
d98bf8ef8e Drive "phd stop" entirely from the process list, not PID files on disk
Summary:
Ref T13321. Depends on D20600. Make `bin/phd stop` mean:

  - `bin/phd stop`: Stop all processes which have daemon process titles. If we're instanced, only stop daemons for the current instance.
  - `bin/phd stop --force`: Stop all processes which have deamon process titles for any instance.

We no longer read or care about PID files on disk, and this moves us away from PID files.

This makes unusual flag `--gently` do nothing. A followup will update the documentation and flags to reflect actual usage/behavior.

This also removes the ability to stop specific PIDs. This was somewhat useful long, long ago when you might explicitly run different copies of the `PullLocal` daemon with flags to control which repositories they updated, but with the advent of clustering it's no longer valid to run custom daemon loadouts.

Test Plan: Ran `bin/phd start`, then `bin/phd stop`. Saw instance daemons stop. Ran `bin/phd stop --force`, saw all daemons stop.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13321

Differential Revision: https://secure.phabricator.com/D20601
2019-06-24 11:05:56 -07:00
epriestley
75c3598359 Require commit identities when editing commits to resolve an issue with audit actions not applying properly
Summary:
See <https://discourse.phabricator-community.org/t/cannot-audit-a-git-commit/2848>. In D20581, I made some audit behavior dependent upon identities, but the actual edit flow doesn't load them. This can cause us to raise an "attach identities first" exception in the bowels of the edit workflow and trigger unexpected behavior at top level.

Load identities when editing a commit so that the transaction flows have access to identity information and can use it to figure out if a user is an author, etc.

Test Plan:
  - As an auditor, applied an "Accept Commit" action to an open audit after D20581.
  - Before patch: accept no-ops internally since the preconditions throw.
  - After patch: accept works properly.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20612
2019-06-24 10:50:23 -07:00
epriestley
ca56e8590a Don't handle JIRA/Asana URIs with anchors or query parameters in a special way (with Doorkeeper)
Summary:
Ref T13291. See PHI1312. Currently, if you link to a JIRA or Asana issue with an anchor (`#asdf`) or query parameters (`?a=b`), we:

  - treat the link as an external object reference and attempt a lookup on it;
  - if the lookup succeeds, we discard the fragment or parameters when re-rendering the rich link (with the issue/task title).

Particularly, the re-rendering part uses the canonical URI of the object, and can discard these parameters/fragments, which is broken/bad.

As a first pass at improving this, just don't apply special behavior for links with anchors or parameters -- simply treat them as links.

In some future change, we could specialize this behavior and permit certain known parameters or anchors or something, but these use cases are likely fairly marginal.

Test Plan:
Before:

{F6516392}

After:

{F6516393}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13291

Differential Revision: https://secure.phabricator.com/D20592
2019-06-21 06:34:44 -07:00
Austin McKinley
6b9f4a918b Modularize PhabricatorEditEngineConfigurationTransaction
Summary: Ref T13319. Ref PHI1302. Migrate `PhabricatorEditEngineConfigurationTransaction` to modular transactions and add some additional transaction rendering to make these edits less opaque.

Test Plan: Hit all the form edit controllers, viewed resulting transaction timeline.

Reviewers: epriestley

Reviewed By: epriestley

Subscribers: Korvin

Maniphest Tasks: T13319

Differential Revision: https://secure.phabricator.com/D20595
2019-06-20 16:25:21 -07:00
epriestley
c0dc411d23 Update "phabricator/" for "topological" API changes
Summary: Ref T13325.

Test Plan:
  - Grepped for `topograph`.
  - Viewed a task graph since that's easy, looked fine.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam

Maniphest Tasks: T13325

Differential Revision: https://secure.phabricator.com/D20599
2019-06-20 16:11:56 -07:00
epriestley
53f8ad14fa Fix an issue in Owners where a transaction change could show too many effects
Summary:
Fixes T13324. Ref PHI1288. Currently, if you edit an Owners package that has some paths with no trailing slashes (like `README.md`) so their internal names and display names differ (`/README.md` display, vs `/README.md/` internal), the "Show Details" in the transaction log shows the path as re-normalized even if you didn't touch it.

Instead, be more careful about handling display paths vs internal paths.

(This code on the whole is significantly less clear than it probably could be, but this issue is so minor that I'm hesitant to start ripping things out.)

Test Plan:
  - In a package with some paths like `/src/` and some paths like `/src`:
  - Added new paths.
  - Removed paths.
  - Changed paths from `/src/` to `/src`.
  - Changed paths from `/src` to `/src/`.

In all cases, the "paths" list and the transaction record identically reflected the edit in the way I expected them to.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13324

Differential Revision: https://secure.phabricator.com/D20596
2019-06-20 16:08:31 -07:00
epriestley
37e26f1b45 Improve rendering of "default value changed" custom form transactions to at least have all the information
Summary:
Ref T13319. Currently, transactions about changes to a default form value use a raw internal key for the affected field and don't show the actual value change.

An ideal implementation will likely require us to specialize a great deal of rendering, but we can do much better than we currently do without too much work:

  - Try to pull the actual `EditField` object for the key so we can `getLabel()` it and get a human-readable label (like `Visible To` instead of `policy.view`).
  - Add a "(Show Changes)" action that dumps the raw values as more-or-less JSON, so you can at least figure out what happened if you're sophisticated enough.

Test Plan:
Before:

{F6516640}

After:

{F6516642}

The quality of "Show Details" varies a lot. For some fields, like "Description", it's pretty good:

{F6516645}

For others, like "Assigned To", it's better than nothing but pretty technical:

{F6516647}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13319

Differential Revision: https://secure.phabricator.com/D20594
2019-06-19 13:47:07 -07:00
epriestley
caaa1394ef Don't count "Cc: x@y.com" as a legitimate recipient if the user who has "x@y.com" attached to their account has not verified the address
Summary:
Fixes T13317. On `admin.phacility.com`, an enterprising user added `noreply@admin.phacility.com` to their account. This caused them to become CC'd on several support issues over the last year, because we send mail "From" this address and it can get CC'd via reply/reply all/whatever else.

The original driving goal here is that if I reply to a task email and CC you on my reply, that should count as a CC in Phabricator, since this aligns with user intent and keeps them in the loop.

This misfire on `noreply@` is ultimately harmless (being CC'd does not grant the user access permission, see T4411), but confusing and undesirable. Instead:

  - Don't allow reserved addresses ("noreply@", "ssladmin@", etc) to trigger this subscribe-via-CC behavior.
  - Only count verified addresses as legitimate user recipients.

Test Plan:
  - Added a `bin/mail receive-test --cc ...` flag to make this easier to test.
  - Sent mail as `bin/mail receive-test --to X --as alice --cc bailey@verified.com`. Bailey was CC'd both before and after the change.
  - Sent mail as `bin/mail receive-test --to X --as alice --cc unverified@imaginary.com`, an address which Bailey has added to her account but not verified.
    - Before change: Bailey was CC'd on the task anyway.
    - After change: Bailey is not CC'd on the task.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13317

Differential Revision: https://secure.phabricator.com/D20593
2019-06-19 12:51:00 -07:00
epriestley
5d8ee504d6 Replace weird, redundant list of branches in Diffusion "Manage" UI with a link to the main branch list
Summary:
Fixes T13312. Currently, {nav Manage > Branches} has a list of branches on the same page. This has a few minor issues:

  - Pager is at the top (see T13312), which is weird.
  - "Default" icon is mystery meat.
  - Table is kind of pointless/redundant in general?

Previously, this table had more information about technical status of each branch (autoclose/track/publish) but most of these details have been simplified/eliminated, and the main "Branches" view now has more information than it did before.

Get rid of this and just link to the main view.

Test Plan: Viewed "Branches" in UI, saw a link to the main view instead of a weird table.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13312

Differential Revision: https://secure.phabricator.com/D20584
2019-06-18 15:19:53 -07:00
epriestley
dda5c13ef5 Parse "shallow" frames in the Git "upload-pack" wire protocol parser
Summary:
Fixes T13309. If you void the warranty on a repository on disk and turn it into a shallow clone, Phabricator currently can't serve it.

We don't support hosting shallow working copies, but we should still parse and proxy the protocol rather than breaking in a mysterious way.

Test Plan:
  - Created a shallow working copy with `mv X X.full; git clone --depth Y file://.../X.full X` in the storage directory on disk.
  - Cloned it with `git clone <uri>`.
  - Deleted all the refs inside it so the wire only has "shallow" frames; cloned it.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13309

Differential Revision: https://secure.phabricator.com/D20577
2019-06-18 15:14:52 -07:00
epriestley
7538286499 Fix missing link targets for "View Object" header buttons in HTML email
Summary:
See <https://discourse.phabricator-community.org/t/view-task-from-maniphest-e-mail-doesnt-have-url/2827>.

I added "View Task" / "View Commit" buttons recently but the logic for generating URIs isn't quite right. Fix it up.

Test Plan:
  - Commented on a task.
  - Used `bin/mail show-outbound --id ... --dump-html > out.html` to dump the HTML.
  - Previewed the HTML in a browser.
  - This time, actually clicked the button to go to the task.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20586
2019-06-18 13:20:56 -07:00
epriestley
6219d30f6b Recommend dumping database backups with "--compress --output X" instead of "| gzip > X"
Summary:
Fixes T13304. Shell pipes and redirects do not have robust behavior when errors occur. We provide "--compress" and "--output" flags as robust alternatives, but do not currently recommend their use.

  - Recommend their use, since their error handling behavior is more robust in the face of issues like full disks.
  - If "--compress" is provided but won't work because the "zlib" extension is missing, raise an explicit error. I believe this extension is very common and this error should be rare. If that turns out to be untrue, we could take another look at this.
  - Also, verify some flag usage sooner so we can exit with an error faster if you mistype a "bin/storage dump" command.

Test Plan: Read documentation, hit affected error cases, did a dump and spot-checked that it came out sane looking.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13304

Differential Revision: https://secure.phabricator.com/D20572
2019-06-18 11:37:14 -07:00
epriestley
1dd62f79ce Fix more "msort()" vs "msortv()" callsites
Summary:
See <https://discourse.phabricator-community.org/t/unhandled-exception-when-logging-in-with-mfa/2828>. The recent changes to turn `msort()` on a vector an error have smoked out a few more of these mistakes.

These cases do not meaningfully rely on sort stability so there's no real bug being fixed, but we'd still prefer `msortv()`.

Test Plan: Viewed MFA and External Account settings panels. Did a `git grep 'msort(' | grep -i vector` for any more obvious callsites, but none turned up.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20587
2019-06-18 11:36:22 -07:00
epriestley
731b45d818 In "bin/repository reparse", continue on "PhabricatorWorkerPermanentFailureException"
Summary:
Fixes T13315. See that task for discussion.

Without `--background`, we currently treat this as a catastrophic failure, but it's relatively routine for some repository states. We can safely continue reparsing other steps.

Test Plan: Ran `bin/repository reparse --all X --message` with commits faked to all be unreachable. Got warnings instead of a hard failure on first problem.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13315

Differential Revision: https://secure.phabricator.com/D20588
2019-06-18 11:32:54 -07:00
epriestley
bab35f28e4 Respect repository identities when selecting author vs auditor actions
Summary:
Depends on D20580. Fixes T13311. When we choose which actions to show a user, we can either show them "auditor" actions (like "raise concern") or "author" actions (like "request verification").

Currently, we don't show "author" actions if you're the author of the commit via an identity mapping, but we should. Use identity mappings where they exist.

(Because I've implemented `getEffectiveAuthorPHID()` in a way that requires `$data` be attached, it's possible this will make something throw a "DataNotAttached" exception, but: probably it won't?; and that's easy to fix if it happens.)

Test Plan:
See D20580. As `@alice`, viewed the commit in the UI.

  - Before: got auditor actions presented to me.
  - After: got author actions.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13311

Differential Revision: https://secure.phabricator.com/D20581
2019-06-17 13:56:38 -07:00
epriestley
4450c90881 When triggering audits, respect committer identities when importing commits
Summary:
Ref T13311. We currently don't use committer identity mappings when triggering audits, so if a user is only associated with an identity via manual mapping we won't treat them as the author.

Instead, use the identity and manual mapping if they're available.

Test Plan:
  - Pushed a commit as `xyz <xyz@example.org>`, an address with no corresponding user.
  - In the UI, manually associated that identity with user `@alice`.
  - Ran `bin/repository reparse --publish <hash>` to trigger audits and publishing for the commit.
  - Before: observed the `$author_phid` was `null`.
  - After: observed the `$author_phid` is Alice.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13311

Differential Revision: https://secure.phabricator.com/D20580
2019-06-17 13:47:31 -07:00
epriestley
4af73a625f Don't require users be logged in to access the Logout controller, so users with no Spaces can log out
Summary:
Fixes T13310. Use cases in the form "users with no access to any spaces can not <do things>" are generally unsupported (that is, we consider this to mean that the install is misconfigured), but "log out" is a somewhat more reasonable sort of thing to do and easy to support.

Drop the requirement that users be logged in to access the Logout controller. This skips the check for access to any Spaces and allows users with no Spaces to log out.

For users who are already logged out, this just redirects home with no effect.

Test Plan:
  - As a user with access to no Spaces, logged out. (Before: error; after: worked).
  - As a logged-out user, logged out (was redirected).
  - As a normal user, logged out (normal logout).

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13310

Differential Revision: https://secure.phabricator.com/D20578
2019-06-17 13:44:02 -07:00
epriestley
14b076578f In "Download Raw Diff", engage the chunk engine to handle 8MB+ changes
Summary:
Fixes T13313. The "Download Raw Diff" workflow in Differential currently uses an older way of interacting with Files that doesn't engage the chunk engine and can't handle 8MB+ files.

Update to `IteratorFileUploadSource` -- we're still passing in a single giant blob, but this approach can be chunked.

This will still break somewhere north of 8MB (it will break at 2GB with the PHP string limit if nowhere sooner, since we're putting the entire raw diff in `$raw_diff` rather than using a rope/stream) but will likely survive diffs in the hundreds-of-megabytes range for now.

Test Plan:
  - Added `str_repeat('x', 1024 * 1024 * 9)` to the `$raw_diff` to create a 9MB+ diff.
  - Configured file storage with no engine explicitly configured for >8MB chunks (i.e., "reasonably").
  - Clicked "Download Raw Diff".
  - Before: misleading file storage engine error ("no engine can store this file").
  - After: large, raw diff response.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13313

Differential Revision: https://secure.phabricator.com/D20579
2019-06-17 13:31:35 -07:00
epriestley
2bc045bab8 Fix another stray "msort()/msortv()" issue
Summary: Ref T13303. See B22967. This should be "msortv()" but didn't get updated properly.

Test Plan: The system works!

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13303

Differential Revision: https://secure.phabricator.com/D20585
2019-06-17 13:20:10 -07:00
epriestley
874282db75 Correct "msort()" vs "msortv()" to more fully stabilize transaction sorts after recent changes
Summary: Ref T13303. I upgraded this to a vector-based sort but forgot to type a "v", which means the sort has different stability under PHP 5.5. See D20582 for a root cause fix.

Test Plan: Locally, on PHP7, not much changes. I expect this to fix the odd selection of title stories in mail and notification stories on `secure`, which is running PHP 5.5.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13303

Differential Revision: https://secure.phabricator.com/D20583
2019-06-17 13:07:38 -07:00
epriestley
d3112392d1 Allow "Sign with MFA" to be applied as a comment action without requiring "CAN_EDIT"
Summary:
Fixes T13307. We currently require "CAN_EDIT" to sign actions, but it's fine to sign a comment with only "CAN_INTERACT".

Since the actions like "Accept Revision" already work like this, the fix is one line.

Test Plan: {F6488135}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13307

Differential Revision: https://secure.phabricator.com/D20574
2019-06-17 10:41:42 -07:00
epriestley
64a9500078 Add "bin/file migrate" options to support import of a local-disk backup for Phacility instances
Summary:
Ref T13306. Currently, there's no easy way to import a third-party local-disk file dump into a Phacility instance.

Add some more options to `bin/files migrate` to support this. In particular, this enables:

```
$ ./bin/files --from-engine local-disk --engine amazon-s3 --local-disk-source path/to/backup
```

...to import these files into S3 directly.

These are general-purpose options and theoretically useful in other use cases, although realistically those cases are probably very rare.

Test Plan: Used `bin/files` with the new options to move files in and out of local disk storage in an arbitrary backup directory. Got clean exports/imports.

Reviewers: amckinley

Maniphest Tasks: T13306

Differential Revision: https://secure.phabricator.com/D20571
2019-06-15 08:12:11 -07:00
epriestley
f1a588c771 Add a basic profiler to Herald transcripts
Summary:
Ref T13298. Add a simple profiler as a starting point to catch any egregiously expensive rules or conditions.

This doesn't profile rule actions, so if "Add subscriber" (or whatever) is outrageously expensive it won't show up on the profile. Right now, actions get evaluated inside the Adapter so they're hard to profile. A future change could likely dig them out without too much trouble. I generally expect actions to be less expensive than conditions.

This also can't pin down a //specific// condition being expensive, but if you see that `H123` takes 20s to evaluate you can probably guess that the giant complicated regex is the expensive part.

Test Plan: {F6473407}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13298

Differential Revision: https://secure.phabricator.com/D20566
2019-06-05 08:50:41 -07:00
epriestley
d7890d08b8 Add "bin/herald rule ..." to modify Herald rules from the CLI
Summary:
Depends on D20566. Ref T13298. See PHI1280. Currently, there's no clean way to disable problematic personal rules. This comes up occasionally and sometimes isn't really the best approach to solving a problem, but is a generally reasonable capability to provide.

Allow Herald rules (including personal rules) to be disabled/enabled via `bin/herald rule ... --disable/--enable`.

Test Plan: Used the CLI to disable and enable a personal rule.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: jmeador

Maniphest Tasks: T13298

Differential Revision: https://secure.phabricator.com/D20567
2019-06-04 07:12:15 -07:00
epriestley
760406762a When a revision is closed, always promote it out of draft
Summary:
Fixes T13300. Currently, if you create a revision and then immediately land it (either using `--draft` or just beating Harbormaster to the punch) it can be stuck in "Draft" forever.

Instead, count landing changes like this as a publishing action.

Test Plan:
  - Used `arc diff --hold` to create a revision, then pushed the commit immediately.
  - Before change: revision closed, but was stuck in draft.
  - After change: revision closed and was promoted out of draft.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13300

Differential Revision: https://secure.phabricator.com/D20565
2019-06-04 06:56:22 -07:00
epriestley
67f062b004 When triggering audits, count "Accepted" revisions as successfully reviewed
Summary:
See PHI1118. That issue may describe more than one bug, but the recent ordering changes to the import pipeline likely make this at least part of the problem.

Previously, commits would always close associated revisions before we made it to the "publish" step. This is no longer true, so we might be triggering audits on a commit before the associated revision actually closes.

Accommodate this by counting a revision in either "Accepted" or "Published (Was Previously Accepted)" as "reviewed".

Test Plan:
  - With commit C affecting paths in package P with "Audit Unreviewed Commits and Commits With No Owner Involvement", associated with revision R, with both R and C authored by the same user, and "R" in the state "Accepted", used `bin/repository reparse --publish <hash>` to republish the commit.
  - Before change: audit by package P triggered.
  - After change: audit by package P no longer triggered.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20564
2019-05-30 17:18:11 -07:00
epriestley
81134d7e7d After reloading transactions for the recipient while building transaction mail, put them in the input order
Summary:
Ref T13303. In D20525 I fixed an issue where transaction rendering could use cached values with the wrong viewer by reloading transactions.

However, reloading transactions may also reorder them as a side effect, since `withPHIDs(...)` does not imply an order. This can make transaction rendering order in mail wrong/inconsistent.

Instead, reorder the transactions before continuing so mail transaction order is consistent.

Test Plan: Applied a group of transactions to a task, saw a more consistent rendering order in mail after the change.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13303

Differential Revision: https://secure.phabricator.com/D20563
2019-05-30 17:14:54 -07:00
epriestley
9a32a563f0 Add a "View Task" button to HTML mail from Maniphest
Summary:
See downstream <https://phabricator.wikimedia.org/T1050>. Some time ago, we added a "View Revision" button to Differential mail. This hasn't created any problems and generally seems good / desirable.

It isn't trivial to just add everywhere since we need a translation string in each case, but at least add it to Maniphest for now. Going forward, we can fill in more applications as they come up.

Test Plan:
Used `bin/mail show-outbound --id <x> --dump-html`:

{F6470461}

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20561
2019-05-30 15:24:22 -07:00
epriestley
fb5dec4c03 Require valid comments to contain at least one non-whitespace character
Summary:
See downstream <https://phabricator.wikimedia.org/T88655>. This is very marginal, but we currently allow comments consisting of //only// whitespace.

These are probably always mistakes, so treat them like completely empty comments.

(We intentionally do not trim leading or trailing whitespace from comments when posting them becuase leading spaces can be used to trigger codeblock formatting.)

Test Plan:
  - Posted empty, nonempty, and whitespace-only comments.
  - Whitespace-only comments now have the same behavior as truly empty comments (e.g., do not actually generate a transaction).

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20562
2019-05-30 15:15:24 -07:00
epriestley
8747204807 Clean up "phabricator.timezone" configuration instructions a little bit
Summary: These instructions are fairly old and can be a little fancier and more clear in the context of modern Phabricator. Drop the reference to "HPHP", link the actual timezone list, wordsmith a little.

Test Plan: d( O_o )b

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20560
2019-05-30 15:08:11 -07:00
epriestley
e5a1681903 Render timezone names more readably, with spaces rather than underscores ("America/Los Angeles", not "America/Los_Angeles").
Summary:
See downstream <https://phabricator.wikimedia.org/T902>. Currently, timezones are rendered with their raw internal names (like `America/Los_Angeles`) which include underscores.

Replacing underscores with spaces is a more human-readable (and perhaps meaningfully better for things like screen readers, although this is pure speculation).

There's some vague argument against this, like "administrators may need to set a raw internal value in `phabricator.timezone` and this could mislead them", but we already give a pretty good error message if you do this and could improve hinting if necessary.

Test Plan: Viewed timezone list in {nav Settings} and the timezone "reconcile" dialog, saw a more-readable "Los Angeles".

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20559
2019-05-30 15:03:11 -07:00
epriestley
53b9acfb7d Test for "CAN_INTERACT" on comment edits in a way that survives objects which only implement "CAN_VIEW"
Summary:
Ref T13289. See D20551. In D20551, I implemented some "CAN_INTERACT" checks against certain edits, but these checks end up testing "CAN_INTERACT" against objects like Conpherence threads which do not support a distinct "CAN_INTERACT" permission. I misrembered how the "CAN_INTERACT" fallback to "CAN_VIEW" actually works: it's not fully automatic, and needs some explicit "interact, or view if interact is not available" checks.

Use the "interact" wrappers to test these policies so they fall back to "CAN_VIEW" if an object does not support "CAN_INTERACT". Generally, objects which have a "locked" state have a separate "CAN_INTERACT" permission; objects which don't have a "locked" state do not.

Test Plan: Created and edited comments in Conpherence (or most applications other than Maniphest).

Reviewers: amckinley

Maniphest Tasks: T13289

Differential Revision: https://secure.phabricator.com/D20558
2019-05-28 10:14:43 -07:00
epriestley
ce6fc5be90 Fix a looping workflow when trying to submit a partially-effectless transaction group
Summary:
Ref T13289. If you do this:

  - Subscribe to a task (so we don't generate a subscribe side-effect later).
  - Prepare a transaction group: sign with MFA, change projects (don't make any changes), add a comment.
  - Submit the transaction group.

...you'll get prompted "Some actions don't have any effect (the non-change to projects), apply remaining effects?".

If you confirm, you get MFA'd, but the MFA flow loses the "continue" confirmation, so you get trapped in a workflow loop of confirming and MFA'ing.

Instead, retain the "continue" bit through the MFA.

Also, don't show "You can't sign an empty transaction group" if there's a comment.

See also T13295, since the amount of magic here can probably be reduced. There's likely little reason for "continue" or "hisec" to be magic nowadays.

Test Plan:
  - Went through the workflow above.
  - Before: looping workflow.
  - After: "Continue" carries through the MFA gate.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13289

Differential Revision: https://secure.phabricator.com/D20552
2019-05-23 19:16:17 -07:00
epriestley
719dd6d3f4 Remove the "search_documentfield" table
Summary: Ref T11741. See PHI1276. After the switch to "Ferret", this table has no remaining readers or writers.

Test Plan:
  - Ran `bin/storage upgrade -f`, no warnings.
  - Grepped for class name, table name, `stemmedCorpus` column; got no relevant hits.
  - Did a fulltext search.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam

Maniphest Tasks: T11741

Differential Revision: https://secure.phabricator.com/D20549
2019-05-23 19:11:38 -07:00
epriestley
aacc62463d Prevent editing and deleting comments in locked conversations
Summary:
Ref T13289. This tightens up a couple of corner cases around locked threads.

Locking is primarily motivated by two use cases: stopping nonproductive conversations on open source installs (similar to GitHub's feature); and freezing object state for audit/record-keeping purposes.

Currently, you can edit or remove comments on a locked thread, but neither use case is well-served by allowing this. Require "CAN_INTERACT" to edit or remove a comment.

Administrators can still remove comments from a locked thread to serve "lock a flamewar, then clean it up", since "Remove Comment" on a comment you don't own is fairly unambiguously an administrative action.

Test Plan:
  - On a locked task, tried to edit and remove my comments as a non-administrator. Saw appropriate disabled UI state and error dialogs (actions were disallowed).
  - On a locked task, tried to remove another user's comments as an administrator. This works.
  - On a normal task, edited comments normally.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13289

Differential Revision: https://secure.phabricator.com/D20551
2019-05-23 19:04:55 -07:00
epriestley
f838ad1827 Fix two straggling pagination issues in Drydock
Summary:
Ref T13289. See <https://discourse.phabricator-community.org/t/fatal-error-in-pagination-in-drydock-resources-host-logs-all-logs/2735>.

`bin/drydock lease` and the web UI for reviewing all object logs when there is more than one page of logs didn't get fully updated to the new cursors.

  - Use a cursor pager in `bin/drydock lease`.
  - Implement `withIDs()` in `LeaseQuery` so the default paging works properly.

Test Plan:
  - Ran `bin/drydock lease`, got a lease with log output along the way.
  - Set page size to 2, viewed host logs with multiple pages, paged to page 2.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam

Maniphest Tasks: T13289

Differential Revision: https://secure.phabricator.com/D20553
2019-05-23 18:50:06 -07:00
epriestley
2e2dc47f07 In the Herald test console, don't consider transactions that Herald rules applied
Summary:
Depends on D20546. Ref T13283. Currently, if you do something (transactions "A", "B") and Herald does some things in response (transaction "C"), Herald acts only on the things you did ("A", "B") since the thing it did ("C") didn't exist yet, until it ran.

However, if you use the test console to test rules against the object we'll pick up all three transactions since they're all part of the same group. This isn't ideal.

To fix this, skip transactions which Herald applied, since it obviously didn't consider them when it was evaluating.

Test Plan:
  - Created a revision, in the presence of a Herald rule that adds reviewers.
  - Then, ran the revision through the test console.
  - Before: saw the "Herald added reviewers: ..." transaction in the transaction group Herald evaluated.
  - After: saw only authentic human transactions.

{F6464064}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13283

Differential Revision: https://secure.phabricator.com/D20547
2019-05-22 16:34:34 -07:00
epriestley
31e623afcc Use the same transaction group ID for transactions applied indirectly by a sub-editor
Summary:
Ref T13283. Currently, each Editor sets its own group ID, so if you create a revision and then Herald does some stuff, the two groups of transactions get different group IDs.

This means the test console is slightly misleading (it will only pick up the Herald transactions). It's going to be misleading anyway (Herald obviously can't evaluate Herald transactions) but this is at least a little closer to reality and stops Herald actions from masking non-Herald actions.

Test Plan:
  - Created a revision. Herald applied one transaction.
  - Used the test console.
  - Before: The test console only picked up the single most recent Herald transaction.
  - After: The test console picked up the whole transaction group.

{F6464059}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13283

Differential Revision: https://secure.phabricator.com/D20546
2019-05-22 16:33:03 -07:00
epriestley
f6af1c4374 When creating a Phriction document, mark initial transactions as "create" transactions to fix weird email
Summary:
Ref T13289. When you create a Phriction document, you currently get an email with the whole new content as a "diff".

You also get extra transactions in the email and on the page.

This is because Phriction isn't on EditEngine and doesn't mark "create" transactions in a modern way. Get them marked properly to fix these obviously-broken behaviors. This can all go away once Phriction switches to EditEngine, although I don't have any particular plans to do that in the immediate future.

Test Plan:
  - Created a new document, viewed email, no longer saw redundant "edited content" transaction or "CHANGES TO CONTENT" diff.
  - Updated a document, viewed email, got interdiff.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13289

Differential Revision: https://secure.phabricator.com/D20548
2019-05-22 16:28:25 -07:00
epriestley
b95bf722d5 Drop the "update revision with commit diff" transaction if the revision is already closed
Summary:
Ref T13290. Prior to recent changes, if we parsed some commit C which was associated with a revision R, but R was already closed, we'd skip the whole set of updates because the "close the revision" transaction would fail and we'd throw because we did not `setContinueOnNoEffect()`.

We now continue on no effect so we can get the edge ("commit has revision" / "revision has commit"), since we want it in all cases, but this means we may also apply an extra "Updated revision to reflect committed changes" transaction and new diff. This can happen even if we're careful about not trying to apply this transaction to closed revisions, since two workers may race. (Today, we aren't too careful about this.)

To fix this, just make this transaction no-op itself if the revision is already closed by the time it tries to apply.

This happened on D20451 because a merge commit with the same hash as the last diff was pushed, but it's easiest to reproduce by just running `bin/repository reparse --message <commit>`, which updates related revisions with a new diff every time.

Test Plan:
  - Ran `bin/repository reparse --messsage <commit>` several times, on a commit with an associated revision.
  - Before: each run attached a new diff and created a new "updated to reflect committed changes" transaction.
  - After: repeated runs had no effects.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13290

Differential Revision: https://secure.phabricator.com/D20545
2019-05-22 16:26:45 -07:00
epriestley
1eff4fdca3 Prevent "Differential Revision: ..." from counting as a mention in commit messages
Summary:
Ref T13290. Ref T13291. Now that a full URI is a "mention", the full URI in "Differential Revision: ..." also triggers a mention.

Stop it from doing that, since these mentions are silly/redundant/unintended.

The API here is also slightly odd; simplify it a little bit to get rid of doing "append" with "get + append + set".

Test Plan: Used `bin/repository reparse --publish` to republish commits with "Differential Revision: ..." and verified that the revision PHID was properly dropped from the mention list.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13291, T13290

Differential Revision: https://secure.phabricator.com/D20544
2019-05-22 16:22:01 -07:00
epriestley
fa4dcaa3aa Stabilize sorting of feed stories with similar strength
Summary:
See PHI1222. When we publish several transactions to feed at once, we sort them by "action strength" to figure out which one gets to be the title story.

This sort currently uses `msort()`, which uses `asort()`, which is not a stable sort and has inconsistent behavior across PHP versions:

{F6463721}

Switch to `msortv()`, which is a stable sort. Previously, see also T6861.

If all transactions have the same strength, we'll now consistently pick the first one.

This probably (?) does not impact anything in the upstream, but is good from a consistency point of view.

Test Plan:
Top story was published after this change and uses the chronologically first transaction as the title story.

Bottom story was published before this change and uses the chronologically second transaction as the title story.

Both stories have two transactions with the same strength ("create" + "add reviewer").

{F6463722}

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20540
2019-05-22 15:50:59 -07:00
epriestley
f91bef64f1 Stack chart functions in a more physical way
Summary:
Ref T13279. See that task for some discussion.

The accumulations of some of the datasets may be negative (e.g., if more tasks are moved out of a project than into it) which can lead to negative area in the stacked chart.

Introduce `min(...)` and `max(...)` to separate a function into points above or below some line, then mangle the areas to pick the negative and positive regions apart so they at least have a plausible physical interpretation and none of the areas are negative.

This is presumably not a final version, I'm just trying to produce a chart that isn't a sequence of overlapping regions with negative areas that is "technically" correct but not really possible to interpret.

Test Plan: {F6439195}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20506
2019-05-22 05:40:39 -07:00
epriestley
f190c42bcd Store charts earlier and build them out a little later
Summary:
Ref T13279. Currently, we store a fairly low-level description of functions and datasets in a chart. This will create problems with (for example) translating function labels.

If you view a chart someone links you, it should say "El Charto" if you speak Spanish, not "The Chart" if the original viewer speaks English.

To support this, store a slightly higher level version of the chart: the chart engine key, plus configuration parameters. This is very similar to how SearchEngine works.

For example, the burndown chart now stores a list of project PHIDs, instead of a list of `[accumulate [sum [fact task.open <project-phid>]]]` functions.

(This leaves some serialization code with no callsites, but we may eventually have a "CustomChartEngine" which stores raw functions, so I'm leaving it for now.)

As a result, function labels provided by the chart engine are now translatable.

(Note that the actual chart is meaningless since the underlying facts can't be stacked like they're being stacked, as some are negative in some areas of their accumulation.)

Test Plan: {F6439121}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20504
2019-05-22 05:39:32 -07:00
epriestley
493a6b72c1 Automatically select the range for charts in a general way
Summary:
Ref T13279. Replace the hard-coded default range with a range computed by examining the chart data.

Instead of having a "Dataset" return a blob of wire data, "Dataset" now returns a structure with raw wire data plus a range. I expect to add more structured data here in future changes (tooltip/hover event data, maybe function labels).

Test Plan: {F6439101}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20503
2019-05-22 05:36:58 -07:00
epriestley
e90360c289 Wrap "<min, max>" chart domain pairs in an "Interval" class
Summary: Ref T13279. Slightly simplify domain handling by putting all the "[x, y]" stuff in an Interval class. I'm planning to do something similar for ranges next, so this should make that easierr.

Test Plan: Viewed chart, saw same chart as before.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20502
2019-05-22 05:28:49 -07:00
epriestley
a80426b339 Provide chart function labels over the wire instead of making them up
Summary: Ref T13279. Makes charts incrementally more useful by allowing the server to provide labels and colors for functions.

Test Plan: {F6438872}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20501
2019-05-22 05:22:59 -07:00
epriestley
c6052b41a6 Label important data on charts
Summary:
Ref T13279. Adds client-side support for rendering function labels on charts, then labels every function as important data.

Works okay on mobile, although I'm not planning to target mobile terribly heavily for v0.

Test Plan: {F6438860}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20500
2019-05-22 05:21:26 -07:00
epriestley
81456db559 Roughly support stacked area charts
Summary:
Ref T13279. This adds support for:

  - Datasets can have types, like "stacked area".
  - Datasets can have multiple functions.
  - Charts can store dataset types and datasets with multiple functions.
  - Adds a "stacked area" dataset.
  - Makes D3 actually draw a stacked area chart.

Lots of rough edges here still, but the result looks slightly more like it's supposed to look.

D3 can do some of this logic itself, like adding up the area stacks on top of one another with `d3.stack()`. I'm doing it in PHP instead because I think it's a bit easier to debug, and it gives us more options for things like caching or "export to CSV" or "export to API" or rendering a data table under the chart or whatever.

Test Plan: {F6427780}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20498
2019-05-22 05:19:41 -07:00
epriestley
5c1b91ab45 Consolidate burndown logic into a "BurndownChartEngine"
Summary:
Ref T13279. For now, we need to render burndowns from both Maniphest (legacy) and Projects (new prototype).

Consolidate this logic into a "BurndownChartEngine". I plan to expand this to work a bit like a "SearchEngine", and serve as a UI layer on top of the raw chart features.

The old "ChartEngine" is now "ChartRenderingEngine".

Test Plan:
  - Viewed burndowns ("burnups") in Maniphest.
  - Viewed burndowns in Projects.
  - Saw the same chart.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20496
2019-05-22 05:10:42 -07:00
epriestley
0aee3da19e Add a "Reports" menu item to Projects
Summary:
Ref T13279. Since the use cases that have made it upstream are all for relatively complex charts (e.g., requiring aggregation and composition of multiple data series in nontrivial ways) I'm currently looking at an overall approach like this:

  - At least for now, Charts provides a low-level internal-only API for composing charts from raw datasets.
  - This is exposed to users through pre-built `SearchEngine`-like interfaces that provide a small number of more manageable controls (show chart from date X to date Y, show projects A, B, C), but not the full set of composition features (`compose(scale(2), cos())` and such).
  - Eventually, we may put more UI on the raw chart composition stuff and let you build your own fully custom charts by gluing together datasets and functions.
  - Or we may add this stuff in piecemeal to the higher-level UI as tools like "add goal line" or "add trend line" or whatever.

This will let the low-level API mature/evolve a bit before users get hold of it directly, if they ever do. Most requests today are likely satisfiable with a small number of chart engines plus raw API data access, so maybe UI access to flexible charting is far away.

Step toward this by adding a "Reports" section to projects. For now, this just renders a basic burnup for the current project. Followups will add an "Engine" layer above this and make the chart it produces more useful.

Test Plan: {F6426984}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20495
2019-05-22 05:08:55 -07:00
epriestley
f87c1ac362 Start the fact daemon in "bin/phd start"
Summary:
Depends on D20488. Ref T13279. When installs run `bin/phd start`, start the fact daemon alongside other daemons.

Since "Reports" in Maniphest now relies on Facts data, populate it.

Test Plan: Ran `bin/phd start`, saw the Fact daemon start.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20489
2019-05-22 04:57:55 -07:00
epriestley
10afe1f2b5 Fix handling of "null" domain values in Charts
Summary: Depends on D20487. If you `min(1, 2, null)`, you get `null`. We want `1`.

Test Plan: Viewed a "burnup for project X" chart where one dataseries had no datapoints. Saw a sensible domain selected automatically.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Differential Revision: https://secure.phabricator.com/D20488
2019-05-22 04:51:22 -07:00
epriestley
f8ebc71b8f Replace the chart in Maniphest Reports with a chart driven by Facts
Summary:
Depends on D20485. Ref T13279. This removes the ad-hoc charting in Maniphest and replaces it with a Facts-based chart.

(To do this, we build a dashboard panel inline and render it.)

Test Plan: {F6412720}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20486
2019-05-22 04:44:10 -07:00
epriestley
ff6b13872c Add a rough "Chart" Dashboard Panel
Summary:
Depends on D20484. Ref T13279. Allows a chart to render as a panel.

Configuring these is currently quite low-level (you have to manually copy/paste a chart key in), but works well enough.

Test Plan: {F6412708}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20485
2019-05-22 04:36:09 -07:00
epriestley
c458b50b85 Render charts from storage instead of just one ad-hoc hard-coded chart
Summary:
Ref T13279. This changes the chart controller:

  - if we have no arguments, build a demo chart and redirect to it;
  - otherwise, load the specified chart from storage and render it.

This mostly prepares for "Chart" panels on dashboards.

Test Plan: Visited `/fact/chart/`, got redirected to a chart from storage.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20483
2019-05-22 04:31:48 -07:00
epriestley
4180b337cf Add a "{src ...}" Remarkup rule to provide a more flexible way to reference source files in Diffusion
Summary: Depends on D20538. Ref T13291. We now recognize full source URIs, but encoding full URIs isn't super human-friendly and we can't do stuff like relative links with them. Add `{src ...}` as a way to get to this behavior that supports options and more flexible syntax.

Test Plan: {F6463607}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13291

Differential Revision: https://secure.phabricator.com/D20539
2019-05-21 13:12:28 -07:00
epriestley
56e7bde68d Recognize self-URI links to Diffusion files and give them special rendering behavior
Summary:
Depends on D20530. Ref T13291. When users paste links to files in Diffusion into remarkup contexts, identify them and specialize the rendering.

When the URIs are embedded with `{...}`, parse them in more detail.

This is a lead-up to a `{src ...}` rule which will use the same `View` but give users more options to customize presentation.

Test Plan: {F6463580}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13291

Differential Revision: https://secure.phabricator.com/D20538
2019-05-21 13:07:37 -07:00
epriestley
7c1f6519e0 Support "none()" in Differential to find revisions with no (un-resigned) reviewers
Summary:
Ref T13289. In Maniphest, you can currently search for "Owner: none()" to find tasks with no owner, but there's no way to search for "Reviewers: none()" in Differential right now.

Add support for this, since it's consistent and reasonable and doesn't seem too weird or niche.

Test Plan: Searched for "Reviewers: none()", found revisions with no reviewers. Searched for "Reviewers: alice, none()", "Reviewers: alice", and "Reviewers: <no constraint>" and got sensible results.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13289

Differential Revision: https://secure.phabricator.com/D20537
2019-05-21 12:56:59 -07:00
epriestley
2f38695768 Support export of feed transactions to CSV/Excel/etc
Summary: Depends on D20534. Ref T13294. Add export support so you can dump these out, print them on paper, notarize them, and store them in a box under a tree or whatever.

Test Plan: Exported transactions to a flat file, read the file.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13294

Differential Revision: https://secure.phabricator.com/D20535
2019-05-21 12:47:46 -07:00
epriestley
16537f7b32 Support filtering feed transactions by object type
Summary: Depends on D20533. Allow querying for transactions of a specific object type, so you can run queries like "Show all edits to Herald rules between date X and Y".

Test Plan: {F6463478}

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20534
2019-05-21 12:39:10 -07:00
epriestley
2e5b1885e7 Add support for querying feed transactions by author and date range
Summary: Depends on D20531. Ref T13294. Enable finding raw transactions in particular date ranges or with particular authors.

Test Plan: {F6463471}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13294

Differential Revision: https://secure.phabricator.com/D20533
2019-05-21 12:37:50 -07:00
epriestley
642113708a Build a rough transaction-level view of Feed
Summary:
Ref T13294. An install is interested in a way to easily answer audit-focused questions like "what edits were made to any Herald rule in Q1 2019?".

We can answer this kind of question with a more granular version of feed that focuses on being exhaustive rather than being human-readable.

This starts a rough version of it and deals with the two major tricky pieces: transactions are in a lot of different tables; and paging across them is not trivial.

To solve "lots of tables", we just query every table. There's a little bit of sleight-of-hand to get this working, but nothing too awful.

To solve "paging is hard", we order by "<dateCreated, phid>". The "phid" part of this order doesn't have much meaning, but it lets us put every transaction in a single, stable, global order and identify a place in that ordering given only one transaction PHID.

Test Plan: {F6463076}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13294

Differential Revision: https://secure.phabricator.com/D20531
2019-05-21 12:28:00 -07:00
epriestley
5305ebddda To improve wrapping behavior of rendered README files, don't use "PHUIDocumentView" in Diffusion
Summary:
See PHI1268. We currently do some weird width handling when rendering Diffusion readmes in a document directory view.

I think this came from D12330, which used `PHUIDocumentViewPro` to change the font, but we later reverted the font and were left with the `DocumentView`. Other changes after that modified `DocumentView` to have fixed-width behavior, but it doesn't make much sense here since the content panel is clearly rendered full-width.

Today, the `DocumentView` is a more structural element with methods like `setCurtain()`. Just get rid of it to simplify things, at least as a first step.

Test Plan:
Before:

{F6463493}

After:

{F6463492}

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20536
2019-05-21 12:18:18 -07:00
epriestley
2f0e655a9b Add a 15-second timeout to external service calls to fill Doorkeeper link tags
Summary:
Depends on D20528. Ref T13291. Ref T13285. Currently, we don't put a timeout on external service calls when enriching URIs for external Asana/JIRA tasks.

Add a 15-second timeout so we'll do something reasonable-ish in the face of a downed service provider. Later, I plan to healthcheck Asana/JIRA providers in a generic way (see T13287) so we can stop making calls if they time out / fail too frequently.

Test Plan:
  - Linked to JIRA and Asana tasks in comments.
  - Set timeout to 0.0001 seconds, saw requests time out.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13291, T13285

Differential Revision: https://secure.phabricator.com/D20530
2019-05-21 12:17:12 -07:00
epriestley
f420159380 Implement Asana and JIRA external links via HyperlinkEngineExtension, not separate Remarkup rules
Summary:
Depends on D20527. Ref T13291. Now that we have more flexible support for URI rewriting, use it for Doorkeeper URIs.

These are used when you set up Asana or JIRA and include the URI to an Asana task or a JIRA issue in a comment.

Test Plan:
  - Linked up to Asana and JIRA.
  - Put Asana and JIRA URIs in comments.
  - Saw the UI update to pull task titles from Asana / JIRA using my OAuth credentials.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13291

Differential Revision: https://secure.phabricator.com/D20528
2019-05-21 12:15:39 -07:00
epriestley
33688c8a41 When an object is referenced by URI, treat it like a mention
Summary:
Ref T13291. Currently, `T123` is a mention and adds an "alice mentioned this on Txxx." to `T123`, but `https://install.com/T123` is not a mention.

Make the full URI a mention.

Test Plan: Commented a full URI, saw the target object get a mention story in its timeline.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13291

Differential Revision: https://secure.phabricator.com/D20527
2019-05-21 12:13:03 -07:00
epriestley
b8f6248e07 Fix an issue where handles could load with the incorrect viewer when building mail about changes to related objects
Summary:
See <https://phabricator.wikimedia.org/T179591>. Some time ago, all handle rendering preloaded handles: things emitted a list of PHIDs they'd need handles for, then later used only those PHIDs.

Later, we introduced `HandlePool` and lazy/on-demand handle loading. Modern transactions mostly use this to render object PHIDs.

When we build mail, many newer transactions use an on-demand load to fetch handles to render transactions. This on-demand load may use the original viewer (the acting user) instead of the correct viewer (the mail recipient): we fetch and reset handles using the correct viewer, but do not overwrite the active viewer for on-demand loading. This could cause mail to leak the titles of related objects to users who don't have permission to see them.

Instead, just reload the transactions with the correct viewer when building mail instead of playing a bunch of `setViewer()` and `clone` games. Until we're 100% on modular transactions, several pieces of the stack cache viewer or state information.

Test Plan:
  - Created task A (public) with subtask B (private).
  - Closed subtask B as a user with access to it.
  - Viewed mail sent to subscribers of task A who can not see subtask B.
    - Before change: mail discloses title of subtask B.
    - After change: mail properly labels subtask B as "Restricted Task".

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20525
2019-05-21 12:12:13 -07:00
epriestley
06778ea550 Separate the "configuration" and "evaluation" phases of chart functions
Summary:
Depends on D20446. Currently, chart functions are both configured through arguments and evaluated through arguments. This sort of conflates things and makes some logic more difficult than it should be.

Instead:

  - Function arguments are used to configure function behavior. For example, `scale(2)` configures a function which does `f(x) => 2 * x`.
  - Evaluation is now separate, after configuration.

We can get rid of "sourceFunction" (which was basically marking one argument as "this is the thing that gets piped in" in a weird magical way) and "canEvaluate()" and "impulse".

Sequences of functions are achieved with `compose(u, v, w)`, which configures a function `f(x) => w(v(u(x)))` (note order is left-to right, like piping `x | u | v | w` to produce `y`).

The new flow is:

  - Every chartable function is `compose(...)` at top level, and composes one or more functions. `compose(x)` is longhand for `id(x)`. This just gives us a root/anchor node.
  - Figure out a domain, through various means.
  - Ask the function for a list of good input X values in that domain. This lets function chains which include a "fact" with distinct datapoints tell us that we should evaluate those datapoints.
  - Pipe those X values through the function.
  - We get Y values out.
  - Draw those points.

Also:

  - Adds `accumluate()`.
  - Adds `sum()`, which is now easy to implement.
  - Adds `compose()`.
  - All functions can now always evaluate everywhere, they just return `null` if they are not defined at a given X.
  - Adds repeatable arguments for `compose(f, g, ...)` and `sum(f, g, ...)`.

Test Plan: {F6409890}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Differential Revision: https://secure.phabricator.com/D20454
2019-05-19 16:54:53 -07:00
epriestley
a76e91ea9e Remove obsolete Dashboard panel methods with no callsites
Summary: Ref T13272. Since the move to EditEngine, these methods have no callsites.

Test Plan: `grep`

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20484
2019-05-17 12:09:02 -07:00
epriestley
167f06d3eb Label transaction groups with a "group ID" so Herald can reconstruct them faithfully
Summary:
Ref T13283. See PHI1202. See D20519. When we apply a group of transactions, label all of them with the same "group ID".

This allows other things, notably Herald, to figure out which transactions applied together in a faithful way rather than by guessing, even though the guess was probably pretty good most of the time.

Also expose this to `transaction.search` in case callers want to do something similar. They get a list of transaction IDs from webhooks already anyway, but some callers use `transaction.search` outside of webhooks and this information may be useful.

Test Plan:
  - Ran Herald Test Console, saw faithful selection of recent transactions.
  - Changed hard limit from 1000 to 1, saw exception. Users should be very hard-pressed to hit this normally (they'd have to add 990-ish custom fields, then edit every field at once, I think) so I'm just fataling rather than processing some subset of the transaction set.
  - Called `transaction.search`, saw group ID information available.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13283

Differential Revision: https://secure.phabricator.com/D20524
2019-05-17 12:07:37 -07:00
epriestley
6bff2cee22 Improve the performance of tab replacement in common cases
Summary:
See PHI1210. For certain large inputs, we spend more time than we need to replacing tabs with spaces. Add some fast paths:

  - When a line only has tabs at the beginning of the line, we don't need to do as much work parsing the rest of the line.
  - When a line has no unicode characters, we don't need to vectorize it to get the right result.

Test Plan:
  - Added test coverage.
  - Profiled this, got a ~60x performance increase on a 36,000 line 3MB text file.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20477
2019-05-16 12:28:39 -07:00
epriestley
c5ecc388a2 Make branch status more clear on Diffusion branches view
Summary:
See PHI1225. Ref T13277. In Diffusion, show "default", "permanent", or "not permanent" when looking at branches.

For repositories with 100 or fewer branches, put default and permanent branches on top.

Test Plan: {F6426814}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: leoluk

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20493
2019-05-16 12:24:39 -07:00
epriestley
e059997e53 Expose subscribers transaction data via Conduit "transaction.search"
Summary:
Depends on D20507. See PHI1232. Previously, see T13255 and D20209.

Since nothing seems to have exploded after "projects" was exposed, give "subscribers" the same treatment.

Test Plan: Added, removed, and modified subscribers. Queried transactions with "transaction.search", saw sensible "type" and data.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20508
2019-05-16 12:19:45 -07:00
epriestley
23bfe0c0f6 Specialize rendering of self-URIs in the form "/X123"
Summary:
Depends on D20510. Ref T5378. When remarkup includes a hyperlink to the current install in the form "/X123" (which is common), load the corresponding object and specialize the rendering.

This doesn't cover everything (notably, no handling for Diffusion paths yet), but does cover a lot of the most common cases.

The "uri" form preserves the URI as written, but adds an icon, tag, and hovercard.

The "{uri}" form is more similar to `{T123}` and shows the object name.

Test Plan: {F6440367}

Reviewers: amckinley, joshuaspence

Reviewed By: joshuaspence

Subscribers: joshuaspence

Maniphest Tasks: T5378

Differential Revision: https://secure.phabricator.com/D20512
2019-05-16 12:16:38 -07:00
epriestley
706826bf02 When a user pastes a Phabricator URI into the search box, redirect to the URI
Summary:
Depends on D20509. See PHI1224. Ref T5378. With some frequency, I paste URIs into the global search input (I am dumb).

When I do this dumb thing, redirect to the URI as though the global search was a URI bar.

Maybe only I am dumb like this, but I don't think it'll hurt anything.

Test Plan: pasted a URI and hit return; tried to eat a rock

Reviewers: amckinley, joshuaspence

Reviewed By: joshuaspence

Maniphest Tasks: T5378

Differential Revision: https://secure.phabricator.com/D20510
2019-05-16 11:19:52 -07:00
epriestley
f2feb0378f Remove ancient "PhabricatorQuickSearchEngineExtension" compatibility class
Summary: Ref T5378. This class was renamed more than a year ago, in D19087. Remove the leftover compatiblity layer.

Test Plan: `grep`

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T5378

Differential Revision: https://secure.phabricator.com/D20509
2019-05-16 11:14:49 -07:00
epriestley
4a3481a493 Enrich "draft", "summary", and "testPlan" transactions from Differential in "transaction.search"
Summary:
See PHI1232, which describes a reasonable use case for wanting information about the "draft" ("Hold as Draft / Do Not Auto-Promote") flag.

Also, flesh out "testPlan" and "summary". It's possible these "blob of remarkup" fields might have metadata some day (e.g., a rendered version or a list of PHIDs or something), but we could add more keys, and we already have some other transactions which work like this.

Test Plan: Used "transaction.search" to fetch these transaction types, saw type information and metadata.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20507
2019-05-16 10:50:28 -07:00
epriestley
18f0f8b029 Add support for custom "Wait for Approval" instructions
Summary:
See PHI1229. An install has a somewhat duct-taped registration flow which can dump users on the "Wait for Approval" screen without clear guidance. The desired guidance is something like "this is totally normal, just wait a bit for a bot to approve you".

Adding guidance here is generally reasonable and consistent with the intent of this feature.

Test Plan: {F6426583}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: kylec

Differential Revision: https://secure.phabricator.com/D20492
2019-05-16 10:41:52 -07:00
epriestley
e5fe4dffe1 Add a "Published document changed" rule to Herald for Phriction documents
Summary: Depends on D20519. Ref T13283. See PHI1202. Add a new rule which triggers when the current/most-recent transaction group includes a "content" or "publish" transaction, which means the published document content has changed.

Test Plan:
  - Wrote a Herald rule using this field.
  - Created a document (rule matched).
  - Edited a document (rule matched).
  - Edited a document, saving as a draft (no match).
  - Edited a draft, updating it (no match).
  - Published a draft docuemnt (rule matched).

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13283

Differential Revision: https://secure.phabricator.com/D20520
2019-05-16 10:40:52 -07:00
epriestley
bf2f3991d2 When using the Herald test console on a transactional object, guess a reasonable set of transactions to simulate
Summary:
Depends on D20518. Ref T13283. When you use the "Test Console" in Herald to test rules, pass the most recent group of transactions to the Adapter.

This will make it easier to test rules that depend on edit state, since you can make the type of edit you're trying to test and then use the Test Console to actually test if it matches in the way you expect.

The transactions we select may not be exactly the group of transactions that most recently applied. For example, if you make edits A, B, and C in rapid succession and then run the Test Console on the object, it may select "A + B + C" as a transaction group. But we'll show you what we selected and this is basically sane/reasonable and should be fine.

(Eventually, we could include a separate "transaction group ID" on transactions if we want to get this selection to match exactly.)

Test Plan: Ran the Test Console on various objects, saw sensible transaction lists in the transcripts.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13283

Differential Revision: https://secure.phabricator.com/D20519
2019-05-16 10:32:54 -07:00
epriestley
046888ac2e In Herald, save applied transaction PHIDs in the transcript and display them in the UI
Summary:
Ref T13283. Since D14575, we already pass applied transactions to Herald, but they exist only as a backwards compatibility layer and have no upstream callsites.

Save the applied transaction PHIDs as part of the object transcript, and show them in the UI.

Test Plan:
  - Viewed a modern transcript, saw a list of transactions.
  - Viewed an older transcript, saw nothing (since there were no transactions in the transcript).

{F6456431}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13283

Differential Revision: https://secure.phabricator.com/D20518
2019-05-16 09:58:16 -07:00
epriestley
a1f08de283 When viewing a workboard, only link to parent workboards in crumbs if parents have workboards
Summary:
Depends on D20516. See PHI1247. In D20331, I made the crumbs on workboards point at ancestor workboards.

However, this isn't a great destination if an ancestor doesn't actually have a workboard. In this case, point at the normal profile URI instead.

Test Plan:
  - Viewed a milestone workboard with a parent that had no workboard. Saw a profile link instead of a workboard link (new behavior).
  - Viewed a milestone workboard with a parent that also had a workboard. Saw a workboard link (existing old behavior still works).

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20517
2019-05-15 07:08:54 -07:00
epriestley
104eefaa10 Hide the "added a commit/revision" stories from feed and mail
Summary:
Ref T13276. Previously, these edges were added directly with an `EdgeEditor`, so they did not generate transaction stories.

Now, they're added properly, but they aren't terribly useful in feed/mail. Hide them in those contexts, like we already do with other types of similar edges.

Test Plan: Will verify behavior on `secure`.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13276

Differential Revision: https://secure.phabricator.com/D20491
2019-05-14 09:39:26 -07:00
epriestley
3e0391c574 Don't mark subscribes/mentions as "Lock Overridden"
Summary:
See PHI1209. When a task is in "Hard Lock" mode, it's still possible to apply some changes to it. Notably:

  - You can subscribe/unsubscribe.
  - You can mention it on another object.
  - You can add a relationship from some other object to it (e.g., select it as a "Parent Task" for some other task).

Currently, these types of edits will show a "Lock Overridden" timeline emblem icon. However, they should not: you didn't override a lock to make these changes, they just bypass locks.

For now, special case these cases (self subscribe/unsubscribe + inverse edge edits) so they don't get the little icon, since I think this list is exhaustive today.

Some day we should modularize this, but we'd need code like this anyway (since TYPE_SUBSCRIBE is not modular yet), and this seems unlikely to cause problems even if it's a bit rough.

Test Plan:
  - Hard-locked a task.
    - Subscribed/unsubscribed, mentioned, relationship'd it as a non-author. No timeline emblems.
  - Soft-locked a task.
    - Subscribed/unsubscribed, mentioned, relationship'd it, no timeline emblems.
    - Clicked "Edit", answered "yes" to the override prompt, edited it. Got a timeline emblem.
  - Added some comments and stuff to a normal non-locked task, no emblems.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20513
2019-05-14 09:27:24 -07:00
epriestley
ee89c2fad9 Fix a fatal when navigating to a Workboard after removing the Workboard menu item
Summary:
See PHI1247. If you remove the Workboard from a project profile menu, then navigate to the URI, we currently fatal when trying to select the "Workboard" item.

Instead, only try to select the item if some matching item is present.

Test Plan:
  - Disabled the workboard on a project, navigated to `/board/`, got a sensible page with no navigation item selected instead of a fatal.
  - Viewed a normal workboard, saw the correct selection.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20516
2019-05-14 09:26:02 -07:00
epriestley
1d58f14469 Remove WePay support from Phortune, and Restful/Httpful dependencies
Summary: Ref PHI1166. I'm documenting our dependencies, and we have approximately 5,000 lines of external code to support WePay as a Phortune provider. We don't use it, I'm almost certain it doesn't work, and we have no plans to use it in the near future. If we did pursue it, I'd probably just wrap the API in a 100-line `WePayFuture` anyway since 5K lines of dependencies to make a couple method calls is ridiculous.

Test Plan: Grepped for `wepay`, `httpful`, `restful`.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: aurelijus

Differential Revision: https://secure.phabricator.com/D20521
2019-05-14 09:14:53 -07:00
epriestley
7a8d489ebd Fix a HunkParser typo, "identcal" -> "identical"
Summary: See rP3f8eccdaec8f85933bfea6ce5348bde25ced0489.

Test Plan: Read carefully.

Reviewers: amckinley, avivey

Reviewed By: avivey

Subscribers: avivey

Differential Revision: https://secure.phabricator.com/D20499
2019-05-07 11:16:55 -07:00
epriestley
5dc4e76eb9 Fix the direction of the commit/revision edge
Summary: Ref T13276. This edge is pointed the wrong way. Point it the right way.

Test Plan: Will verify production works better.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13276

Differential Revision: https://secure.phabricator.com/D20490
2019-05-02 07:28:49 -07:00
epriestley
c43618a3a8 Add "Move Left" and "Move Right" to dashboard tab panels
Summary: Depends on D20474. Ref T13272. Provide an easy way to rearrange tabs on a tab panel, by moving them left or right from the context menu.

Test Plan: Moved tabs left and right. Tried to move them off the end of the tab list, no luck.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20475
2019-05-01 15:35:53 -07:00
epriestley
9d716379a3 Add a "Customize Query" action to query panels to make it easier to make minor query adjustments
Summary:
Depends on D20473. Ref T13272. Fixes T7216. If you want to tweak the query a panel uses, you currently have to complete 7 Great Labors.

Instead, add a "Customize Query" action which lets you update the query inline.

Test Plan: {F6402171}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272, T7216

Differential Revision: https://secure.phabricator.com/D20474
2019-05-01 11:01:09 -07:00
epriestley
a15b0063df Add "Revision has passing builds" Herald rules for commit content (pushes) and commits (discovery)
Summary:
Depends on D20469. Ref T13276. See PHI1159. See PHI953. See PHI901.

Allow Herald to detect when "arc land" would (or did) warn users about failed or ongoing builds. This respects the "Warn on Landing" build plan behavior.

To accomplish this:

  - When we close a revision, set a "wrong build state" flag if it lands in the wrong build state.
  - If the revision is closed when we hit Herald, look for the flag.
  - If not (common for push rules, can happen for commit rules if we race against the revision update worker), hit Harbormaster ourselves and check the current state.

Test Plan:

  - Wrote a "Require Green" rule.
  - Ran it against various commits with various build states (good, not good).
  - Fiddled with "Warn on Landing" and saw the effect in rule evaluation.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13276

Differential Revision: https://secure.phabricator.com/D20470
2019-05-01 10:02:47 -07:00
epriestley
a78f141b3f Unify code for parsing "Reverts X" magic, and when something "reverts <hash>", also revert associated revisions
Summary:
Depends on D20468. Ref T13276. See PHI1008.

When a commit or revision "reverts <hash>", and that's the hash of a commit which has a revision, also write a "reverts" edge to the revision.

Test Plan:
Created "reverts X" objects for:

  - a revision;
  - a commit;
  - a commit with a revision (both got marked properly).

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13276

Differential Revision: https://secure.phabricator.com/D20469
2019-05-01 09:47:40 -07:00
epriestley
56f5c2443b Consolidate readers of "differential.revisionID" property
Summary:
Depends on D20467. Ref T13277. Currently, the "MessageParserWorker" writes this property on commits, then Herald and Audit both read it.

Make them share code so this property has one writer and one reader. This property isn't great, but at least now the badness is hidden.

Currently, we can't just use edges because they may not have been written yet. I am likely to just do this, soon:

  - Just write the edges (in "MessageParserWorker").
  - Hide the edges from mail.

However, we'll sort-of lose the "revisionMatchData" explanation thing if I do that. Maybe this is fine? But when commits match because hashes match, it legitimately isn't obvious.

For now, just reduce the amount of harm/badness here.

Test Plan:
  - Ran `bin/repository reparse --publish ...`.
  - Ran a Herald "Audit" rule using the "Accepted Differential revision" field.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20468
2019-05-01 09:46:17 -07:00
epriestley
45f01dc716 Restore "Limit" to dashboard Query panels
Summary: See PHI1220. Ref T13272. I accidentally left the ability to set a query limit behind when updating this.

Test Plan: Edited a query panel, set/removed the limit, tried to set an invalid limit.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20472
2019-05-01 08:41:43 -07:00
epriestley
dfbc4c1cd3 Fix an issue where editing a dashboard panel from a dashboard could duplicate the panel
Summary:
Depends on D20472. Ref T13272. Currently, when you edit a panel from a dashboard, we try to add the panel to the dashboard. This always works since dashboards no longer enforce panel uniqueness, and you can end up with duplicate panels.

Instead, only add panels if we're creating them.

Test Plan:
  - Edited an existing panel, no duplication.
  - Created a new panel, saw it added to the dashboard.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20473
2019-04-30 08:27:20 -07:00
epriestley
648d5ce190 Set a URI on Auth Messages, so the "Change Details" dialog from the transaction record has a cancel button
Summary:
If you edit an auth message in Auth > Customize Messages, then click "Show Details" in the transaction record, the resulting dialog uses the object's handle's URI to generate a "cancel" button.

Since these handles currently have no URI, the dialog currently has no cancel/done button to close it.

Test Plan: Edited an auth message, clicked "Show Details", was now able to click "Done" to close the dialog.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20471
2019-04-30 06:59:04 -07:00
epriestley
6d13b9fb7a Make very minor generality improvements to the scope selector
Summary:
See PHI985. I think we pretty much need to start applying language-specific rules, but we can apply at least one more relatively language-agnostic rule: don't match lines which are indented 3+ levels.

In C++, we may have symbols like this:

```
class X {
  public:
    int m() { ... }
}
```

..but I believe no mainstream language puts symbol definitions 3+ levels deep.

Also clean up some of the tab handling very slightly.

Test Plan: Tests pass, looked at some C++ code and got slightly better (but still not great) matches.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20479
2019-04-30 06:52:29 -07:00
epriestley
6eae75d8f2 When building a synthetic diff in Differential, adjust diff properties correctly
Summary:
See PHI1218. When rendering "A vs B", we currently show the properties of diff A without modification.

Instead, take properties from the same place we're taking change details.

See T12664 for a followup.

Test Plan:
  - In diff A, removed "+x" from a file.
  - In diff B, changed the file but did not remove "+x" from it.
  - Diffed B vs A.
    - Before change: UI incorrectly shows "+x" removed (both sides incorrect, just showing the change from diff A).
    - After change: UI shows 100644 -> null, which is half right.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20478
2019-04-30 06:51:40 -07:00
epriestley
0d9362355b In ApplicationTransactionEditor, determine new objects with "getID()" instead of "getPHID()"
Summary:
See <https://discourse.phabricator-community.org/t/unable-to-reload-object-that-hasnt-been-loaded/2677>.

When editing "Config" objects, they currently get a PHID set outside of the TransactionEditor. They probably should not, but fixing that is likely an involved change.

This causes us to incorrectly fail to detect `$is_new` correctly and try to `reload()` and object with no ID.

To work around this, test for new objects with `getID()` instead of `getPHID()`.

Test Plan: Edited any config value with the web UI.

Reviewers: amckinley

Differential Revision: https://secure.phabricator.com/D20482
2019-04-29 07:37:03 -07:00
epriestley
c0a4d1de13 Merge the "Herald" and "Owners" daemon workers into a single "Publish" worker
Summary:
Depends on D20466. Ref T13277. Currently:

  - The "Owners" worker writes ownership relationships (e.g., commit X affects package Y, because it touches a path in package Y) -- these are just edges.
  - It also triggers audits.
  - Then it queues a "Herald" worker.
  - This formally publishes the commit and triggers Herald.

These aren't really separate steps and can happen more easily in one shot. Merge them.

Test Plan:
  - Ran `bin/repository reparse --publish` to republish various commits, got sensible behavior.
  - Grepped for "IMPORTED_OWNERS", "IMPORTED_HERALD", "--herald", "--owners", and "--force-local" flags.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20467
2019-04-25 09:45:59 -07:00
epriestley
0fab41ff3c Show "hold reasons" on commit page, not on "Edit" page
Summary:
Depends on D20465. Ref T13277. Currently, when a commit is unpublished, we put a single line about it on the "Edit Commit" page. This is pretty much impossible to find.

Move it to the main page. This treatment is more big/bold than I'd probably like to end up, but we should probably overshoot on the explanatory text until users get used to this behavior.

Also, allow searching for only published / unpublished commits.

Test Plan: {F6395705}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20466
2019-04-25 09:22:49 -07:00
epriestley
8f43c773b8 Remove nearly all remaining references to "Autoclose"
Summary:
Depends on D20464. Ref T13277. Broadly:

  - Move all the "should publish X" and "why aren't we publishing X" stuff to a separate class (`PhabricatorRepositoryPublisher`).
  - Rename things to be more consistent with modern terminology ("Publish", "Permanent Refs").

Test Plan:
This could use some trial-by-fire on `secure`, but:

  - Grepped for all symbols.
  - Viewed various commits.
  - Reparsed commits.
  - Here's a commit with an explanation:

{F6394569}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20465
2019-04-24 08:29:41 -07:00
epriestley
45b9859f02 Remove "--force-autoclose" from "bin/repository reparse"
Summary: Depends on D20463. Ref T13277. This flag was added some time before 2015 and I don't think I've ever used it. Just get rid of it.

Test Plan: Grepped for `force-autoclose`, `forceAutoclose`, `AUTOCLOSE_FORCED`.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20464
2019-04-24 08:24:06 -07:00
epriestley
a2d3d8edeb Move "update related object after commit" to a separate worker in the task queue
Summary:
Depends on D20462. Ref T13276. Currently, the "Message" parser also updates related tasks and revisions when a commit is published.

For PHI1165, which ran into a race with message parsing, I originally believed we needed to separate this logic and lock + yield to avoid the race. D20462 provides what is probably a better approach for avoiding the race.

Still, I think separating these "update related revisions" and "updated related tasks" chunks into separate workers is a net improvement. There may still be some value in doing lock + yield in the future to deal with other issues, and when we occasionally run into problems with pulling a diff out of the repository to update the revision (usually because the diff is too big) this isolates the problem better and allows the commit to import.

I think the only thing to watch out for here is that Herald may now run before the revision and commit are attached to one another. This is fine for all current Herald rules, we just need to be mindful in implementing new rules.

Test Plan: Used `bin/repository reparse --message` on various commits, including commits that close revisions and close tasks.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13276

Differential Revision: https://secure.phabricator.com/D20463
2019-04-24 06:32:27 -07:00
epriestley
b3b1cc64bd When applying transactions, acquire a read lock sooner
Summary:
Depends on D20461. Ref T13276. Ref T13054.

Currently, we acquire the transaction read lock after populating "old values" in transactions and filtering transactions with no effect.

This isn't early enough to prevent all weird chaotic races: if two processes try to apply a "close revision" transaction at the same time, this can happen:

```
PROCESS A             PROCESS B
Old Value = Open      Old Value = Open
Transaction OK: Yes   Transaction OK: Yes
Acquire Read Lock     Acquire Read Lock
Got Read Lock!        Wait...
Apply Transactions    Wait...
New Value = Closed    Wait...
Release Lock          Wait...
                      Got Read Lock!
                      Apply Transactions
                      New Value = Closed
                      Release Lock
```

That's not great: both processes apply an "Open -> Closed" transaction since this was a valid transaction from the viewpoint of each process when it did the checks.

We actually want this:

```
PROCESS A             PROCESS B
Acquire Read Lock     Acquire Read Lock
Got Read Lock!        Wait...
Old Value = Open      Wait...
Transaction OK: Yes   Wait...
Apply Transactions    Wait...
New Value = Closed    Wait...
Release Lock          Wait...
                      Got Read Lock!
                      >>> Old Value = Closed
                      >>> Transaction Has No Effect!
                      >>> Do Nothing / Abort
                      Release Lock
```

Move the "lock" part up so we do that.

This may cause some kind of weird second-order effects, but T13054 went through pretty cleanly and we have to do this to get correct behavior, so we can survive those if/when they arise.

Test Plan:
  - Added a `sleep(10)` before the lock.
  - Ran `bin/repository message --reparse X` in two console windows, where X is a commit that closes revision Y and Y is open.
    - Before patch: both windows closed the revision and added duplicate transactions.
    - After patch: only one of the processes had an effect.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: jmeador

Maniphest Tasks: T13276, T13054

Differential Revision: https://secure.phabricator.com/D20462
2019-04-24 05:57:29 -07:00
epriestley
42c02557e4 Remove all remaining readers and writers for TABLE_COMMIT
Summary: Depends on D20459. Ref T13276. I'll file a followup to actually destroy the table.

Test Plan:
- Grepped for `TABLE_COMMIT`.
- Ran `bin/storage upgrade -f`, got a clean bill of health.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13276

Differential Revision: https://secure.phabricator.com/D20461
2019-04-24 05:55:23 -07:00
epriestley
ec0085fd0c Align "RevisionQuery->needCommitPHIDs()" to use Edges, not the legacy table
Summary:
Depends on D20458. Ref T13276. Although I'm not thrilled about "needCommitPHIDs()", it has a few callers, including custom fields. Allow "need + attach + get" to survive for now since they're reasonably modern, at least.

However, use edges instead of "TABLE_COMMIT" and require `need...()` + `get...()`, removing the direct `load...()`.

Also remove `RevisionQuery->withCommitPHIDs(...)`, which has no callers.

Test Plan:
- Grepped for `loadCommitPHIDs` (only two hits, the private `RevisionQuery` method).
- Called "differential.getrevision", got commits.
- Viewed a revision, saw "Commits: ...".
- Grepped for `withCommitPHIDs()`, no callers on `RevisionQuery` (some other query classes have methods with this name).
- Called "differential.query", got commits.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13276

Differential Revision: https://secure.phabricator.com/D20459
2019-04-24 05:54:38 -07:00
epriestley
7e8dc0742b Remove all callers to "DifferentialRevision->loadIDsByCommitPHIDs()"
Summary: Depends on D20457. Ref T13276. Kill all remaining callers to this method and delete it.

Test Plan:
- Grepped for `loadIDsByCommitPHIDs`.
- Viewed blame again to make sure I didn't break it.
- Viewed "History" view for commits with revisions.
- Viewed "Graph" view for commits with revisions.
- Viewed "Merged Commits" table for commits with revisions.
- Viewed "Compare" table for commits with revisions.
- Viewed "Repository" main page history table for commits with revisions.
- Grepped for `linkRevision`.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13276

Differential Revision: https://secure.phabricator.com/D20458
2019-04-24 05:53:35 -07:00
epriestley
fc92cf4382 Move BlameController away from ancient "TABLE_COMMIT"
Summary:
Ref T13276. Differential has a pre-edge "TABLE_COMMIT" with about a half-dozen weird callers I'd like to get rid of.

Move blame to use edges instead. (Bonus: this makes blame respect edge edits in the UI.)

Since there are some more callers to clean up this code may move into some "RelatedObjectQueryThing" class or something, but I'm taking it one step at a time for now.

Test Plan: {F6394106}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13276

Differential Revision: https://secure.phabricator.com/D20457
2019-04-24 05:44:40 -07:00
epriestley
70c643c685 Simplify implementation of "pure" Chart functions
Summary:
Depends on D20445. Ref T13279. I'm not sure what the class tree of functions actually looks like, and I suspect it isn't really a tree, so I'm hesitant to start subclassing. Instead, try adding some `isSomethingSomething()` methods.

We have some different types of functions:

  # Some functions can be evaluated anywhere, like "constant(3)", which always evaluates to 3.
  # Some functions can't be evaluated anywhere, but have values everywhere in some domain. This is most interesting functions, like "number of open tasks". These functions also usually have a distinct set of interesting points, and are constant between those points (any count of anything, like "open points in project" or "tasks closed by alice", etc).
  # Some functions can be evaluated almost nowhere and have only discrete values. This is most of the data we actually store, which is just "+1" when a task is opened and "-1" when a task is closed.

Soon, I'd like to be able to show ("all tasks" - "open tasks") and draw a chart of closed tasks. This is somewhat tricky because the two datasets are of the second class of function (straight lines connecting dots) but their "interesting" x values won't be the same (users don't open and close tasks every second, or at the same time).

The "subtract X Y" function will need to be able to know that `subtract "all tasks" 3` and `subtract "all tasks" "closed tasks"` evaluate slightly differently.

To make this worse, the data we actually //store// is of the third class of function (just the "derivative" of the line chart), then we accumulate it in the application after we pull it out of the database. So the code will need to know that `subtract "derivative of all tasks" "derivative of closed tasks"` is meaningless, or the UI needs to make that clear, or it needs to interpret it to mean "accumulate the derivative into a line first".

Anyway, I'll sort that out in future changes. For now, simplify the easy case of functions in class (1), where they're just actual functions.

Add "shift(function, number)" and "scale(function, number)". These are probably like "mul" and "add" but they can't take two functions -- the second value must always be a constant. Maybe these will go away in the future and become `add(function, constant(3))` or something?

Test Plan: {F6382885}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20446
2019-04-23 12:29:45 -07:00
epriestley
edaf17f3fe Make chart function argument parsing modular/flexible with 900 pages of error messages
Summary:
Depends on D20444. Ref T13279. Instead of ad-hoc parsing and messages, formalize chart function arguments.

Also, add a whole lot of extra type checking.

Test Plan: Built and charted various functions with various valid and invalid argument lists, got sensible-seeming errors and results.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20445
2019-04-23 12:26:32 -07:00
epriestley
7b8ac020b5 Change "Revision Close" story to use commit identities only with no fallback to commit data
Summary:
See PHI1213. If we don't have identities for "revision X closed by commit Y" stories, just do the plain non-attribution rendering rather than trying to fall back. Falling back won't work since we don't load the data, which should be OK now since identities seem like they're in generally good shape.

(We could probably just throw out the fallback behavior instead, but we can always clean things up later.)

Test Plan: Forced no commit identity on a revision, loaded it, saw reasonable story rendering.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20460
2019-04-23 11:57:33 -07:00
epriestley
b0b8926c75 Fix "before/after" cursor paging for API call "feed.query"
Summary:
Ref T13266. See <https://discourse.phabricator-community.org/t/undefined-method-setafterid-when-calling-feed-query/2653>.

This older API call needs an update to the newer paging/cursor API.

Test Plan: Called `feed.query` with an "after" parameter.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: Itms

Maniphest Tasks: T13266

Differential Revision: https://secure.phabricator.com/D20456
2019-04-23 11:51:16 -07:00
epriestley
a4a1143b18 Fix an issue where internal paging of notifications could fail if some notifications are not visible
Summary:
Ref T13266. See <https://discourse.phabricator-community.org/t/notification-page-throws-unrecoverable-fatal-error/2651/>.

The "notifications" query currently uses offset paging for no apparent reason (just a legacy issue?), so some of the paging code is only reachable internally.

  - Stop it from using offset paging, since modern cursor paging is fine here (and Feed has used cursor paging for a long time).
  - Fix the non-offset paging to work like Feed.

Also:

  - Remove a couple of stub methods with no callsites after cursor refactoring.

Test Plan:
  - Set things up so I had more than 100 notifications and some in the first 100 were policy filtered, to reproduce the issue (I just made `FeedStory` return `NO_ONE` as a visibility policy).
  - Applied the patch, notifications now page cleanly.
  - Verified that "Next Page" took me to the right place in the result list.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: hskiba

Maniphest Tasks: T13266

Differential Revision: https://secure.phabricator.com/D20455
2019-04-23 11:45:04 -07:00
epriestley
a82a2b8459 Simplify non-bare working copy rules for the new "git fetch" strategy
Summary:
Ref T13280. In D20421, I changed our observe strategy to `git fetch <uri>` in all cases.

This doesn't work in an ancient, non-bare repository if `master` is checked out and `master` is also fetch: `git` refuses to overwrite the local ref unless we pass `--update-head-ok`. Pass this flag.

Also, remove some code which examines branches and tags in a special way for non-bare working copies. The old `git fetch <origin>` code without explicit revsets meant that `refs/remotes/orgin/heads/xyz` got updated instead of `refs/heads/xyz`. We now update our local refs in all cases (bare and non-bare) so we can throw away this special casing.

Test Plan:
  - Replaced a modern bare working copy with a non-bare working copy by explicitly using `git clone` without `--bare`.
  - Ran `bin/repository update`, hit the `--update-head-ok` error. Applied the patch, got a clean update.
  - Used the "repository.branchquery" API method...
    - ...with "contains" to trigger the "git branch" case. Got identical results after removing the special casing.
    - ...without "contains" to trigger the "low level ref" case. Got identical results after removing the special casing.
  - Grepped for `isWorkingCopyBare()`. The only remaining callsites deal with hook paths, and genuinely need to be specialized.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13280

Differential Revision: https://secure.phabricator.com/D20450
2019-04-19 07:06:10 -07:00
epriestley
e1076528ef Copy the "line-chart" behavior to "line-chart-legacy" to keep "Maniphest > Reports" working
Summary:
Ref T13279. Charting changes alter how the "line-chart" behavior works, but the "Burnup Chart" still relies on the old behavior.

Although I'm intending to remove "Maniphest > Reports" once Facts is a minimally sufficient replacement, copy this behavior to keep it working until we're ready to pull the trigger.

Also fix a leftover typo from D20435.

Test Plan: Viewed a legacy Maniphest burnup rate report.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20449
2019-04-19 07:05:37 -07:00
Austin McKinley
de74332639 Improve timeline rendering for old macros
Summary: This always bugs me when I'm going through `secure` looking for the spiciest macros.

Test Plan: Forced a date to be null, saw reasonable text.

Reviewers: epriestley

Reviewed By: epriestley

Subscribers: Korvin

Differential Revision: https://secure.phabricator.com/D20453
2019-04-18 18:25:17 -07:00
epriestley
d8dba26a08 Add a "sin()" function to charts
Summary:
Depends on D20443. Ref T13279. This is probably not terribly useful on its own, but is mostly a function which takes another function as an argument, and a step toward more useful functions like arithmetic and drawing a picture of an owl.

The only structural change here is that functions now read data parameters (domain, sample limit) using a more tailored "ChartDataQuery" instead of reading the actual axis. Mostly, I want a more cohesive representation of query state that can be easily passed to sub-functions, as here.

Test Plan: {F6382432}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20444
2019-04-18 13:19:02 -07:00
epriestley
c4e4448ee6 Add chart functions "x()" and "constant(3)"
Summary:
Depends on D20442. Ref T13279. Add basic support for drawing chart functions that are not based on Facts first-party ETL datasets. Some general goals:

  - This might be useful to draw a line like "goal" or "profitability".
  - This might be useful to pull data from an external source.
  - For composable functions like "add" or "subtract", which are useful in manipulating ETL datasets, these value functions will make testing easier.

Test Plan:
Added a `constant(256)` function:

{F6382408}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20443
2019-04-18 13:16:42 -07:00
epriestley
cd2215fd4a Don't warn that workboard columns need a name when editing milestone columns
Summary: See <https://discourse.phabricator-community.org/t/columns-must-have-a-name-while-editong-point-limit-on-milestone-column/2650>. This check doesn't make sense for proxy columns, including milestone columns.

Test Plan: Added a point limit to a milestone column.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20448
2019-04-18 13:13:10 -07:00
epriestley
23d8f000f7 Select the domain (X-axis range) for charts before pulling data
Summary:
Depends on D20441. Ref T13279. Currently, we pull all the data, then decide what the X-axis should look like.

Since users will reasonably want to do stuff like "show me march-april 2018" in the future, we need to move toward flipping this around so that we can support cases where the domain is specified by the user.

For actual chart functions (like "constant(3)" or "cos(x)"), we must also know the domain before we pull data, since there are an infinite number of places where we can evaluate the function "constant(3)".

See note in T13279 about continunity.

Test Plan: {F6382356}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20442
2019-04-18 13:11:17 -07:00
epriestley
954831f533 Separate chart functions into a class tree
Summary:
Depends on D20440. Ref T13279. Create a class to represent a chartable function: something we can get some data points out of.

Then, make the chart chart two functions.

For now, the only supported function is "fact(key)", which pulls data from the Facts ETL pipeline, identified by "key", and takes no other arguments.

In future changes, I plan to support things like "fact(tasks.open.project, PHID-PROJ-xyz)", "constant(1000)" (e.g. to draw a goal line), "sum(fact(...), fact(...))" (to combine data from several projects), and so on.

The UI may not expose this level of power for a while (or maybe ever) but until we get close enough to the UI that these features are a ton of extra work I'm going to try to keep things fairly flexible/modular.

Test Plan: {F6382286}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20441
2019-04-18 13:05:52 -07:00
epriestley
45b3c23148 Fetch chart data via async request and redraw charts when the window is resized
Summary:
Depends on D20439. Ref T13279. Some day, charts will probably need to reload themselves or do a bunch of defer/request-shaping magic when they're on a dashboard with 900 other charts.

Give the controller separate "HTML placeholder" and "actual data" modes, and make the placeholder fetch the data in a separate request.

Then, make the chart redraw if you resize the window instead of staying at whatever size it started as.

Test Plan:
  - Loaded a chart, saw it load data asynchronously.
  - Resized the window, saw the chart resize.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20440
2019-04-18 07:10:05 -07:00
epriestley
044c6fbc19 Support drawing multiple functions on the same chart
Summary: Depends on D20438. Ref T13279. Widgets produced vs widgets sold, etc.

Test Plan: {F6381609}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20439
2019-04-18 07:07:33 -07:00
epriestley
02981f0add Fix negative chart values, add storage for charts
Summary:
Ref T13279. I think I'm going to fling some stuff at the wall for a bit here and hope most of it sticks, so this series of changes may not be terribly cohesive or focused. Here:

The range of the chart is locked to "[0, 105% of max]". This is trying to make a pleasing extra margin above the maximum value, but currently just breaks charts with negative values. Later:

    - I'll probably let users customize this.
    - We should likely select 0 as the automatic minimum for charts with no negative values.
    - For charts with positive values, it would be nice to automatically pick a pleasantly round number (25, 100, 1000) as a maximum by default.

We don't have any storage for charts yet. Add some. This works like queries, where every possible configuration gets a short URL slug. Nothing writes or reads this yet.

Rename `fn()` to `css_function()`. This builds CSS functions for D3. The JS is likely to get substantial structural rewrites later on, `fn()` was just particularly offensive.

Test Plan: Viewed a fact series with negative values. Ran `bin/storage upgrade`.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam

Maniphest Tasks: T13279

Differential Revision: https://secure.phabricator.com/D20438
2019-04-18 06:59:41 -07:00
epriestley
faf0a311ec In Git repositories, use "git symbolic-ref HEAD ..." to select the default branch
Summary:
Depends on D20434. Fixes T5963. Broadly, the issue here is that when:

  - You create a new, empty repository.
  - Then, you work on some branch other than `master`, without ever creating `master`.

...you get a warning on `git clone`:

> warning: remote HEAD refers to nonexistent ref, unable to checkout

To fix this, point the symbolic-ref HEAD at `refs/heads/<default-branch>` after installing commit hooks.

This fixes the warning, and also means that `git clone` will check out the repository default branch by default, which is nice.

There are a few caveats about this behavior (see T5963 for discussion) but nothing too substantial.

The only real issue is that Git prevents deletion of the default branch without a config setting. Just set that settting.

Test Plan:
See T5963.

In a repository, set `HEAD` to point somewhere invalid. Ran `bin/repository update ...`. Saw HEAD pointed back at the repository default branch.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T5963

Differential Revision: https://secure.phabricator.com/D20435
2019-04-18 05:46:40 -07:00
epriestley
7be671fb07 Update "Autoclose" documentation to focus on "Permanent Refs" instead
Summary:
Depends on D20433. Ref T13277. Since "Autoclose" no longer exists, update the documentation.

Currently, this documentation focuses a lot on troubleshooting because users historically had a lot of trouble with figuring out why things were or were not autoclosing. I haven't seen any real confusion about this in years, so I suspect we may have improved the import pipeline and/or UI to make this less of a problem.

It's also possible that this document "fixed" the problem, but usually I expect a documentation fix to not affect the frequency of reports, just make them easier to resolve, so I doubt it.

If unclear things remain //and// documentation really did fix it, maybe we can fix the issues. Or we can just put the troubleshooting documentation back.

Test Plan: Read documentation.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20434
2019-04-18 05:43:15 -07:00
epriestley
c33f544e74 Deprecate "Track Only" in the Diffusion UI
Summary:
Depends on D20432. Ref T13277. Fixes T12967. Removes some "Track Only" hints and warns that the feature is deprecated in favor of "Permanent Refs" and "Fetch Only".

(This "fixes" T12967 by mooting it.)

Test Plan: Viewed "branches" sectino of the manage UI, edited "braches" section of a repository.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277, T12967

Differential Revision: https://secure.phabricator.com/D20433
2019-04-18 05:40:02 -07:00
epriestley
6449a0ecb2 Rename some internal "Autoclose" mentions to "Permanent Refs"
Summary: Depends on D20428. Ref T13277.

Test Plan: Grep / reading.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20432
2019-04-18 05:38:09 -07:00
epriestley
d1223ac577 When a commit appears as an ancestor of a permanent ref for the first time, run all import steps
Summary:
Depends on D20427. Ref T13277. As an optimization, when we discover that a commit which was previously only on a non-permanent ref ("tmp-epriestley-123") is now reachable from a permanent ref ("master"), we currently queue only a new "message" parse step.

This is an optimization because these commits previously got the full treatment (feed, publish, audit, etc) as soon as they were discovered. Now, those steps only happen once a commit is reachable from a permanent ref, so we need to run everything.

Test Plan:
  - Pushed local "tmp-123" branch to remote tag "tmp-123".
  - Updated repository with "bin/repository update", saw commit import as a "not on any permanent ref" commit, with no herald/audit/etc.
  - Merged "tmp-123" tag into "master".
  - Pushed new "master".
  - Updated repository with "bin/repository refs ... --trace --verbose", saw commit detected as now reachable from a permament ref.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20428
2019-04-18 05:37:15 -07:00
epriestley
9107c2e262 Deprecate the "Commit is on autoclose/permanent branch" Herald "Commit" field
Summary:
Depends on D20426. Ref T13277. The new behavior is to fire Herald only once a commit becomes reachable from a permanent ref (previously, an "Autoclose" branch).

That means that every "Commit" Herald rule implicitly has this field as a condition, and it no longer does anything.

Test Plan: Wrote a Herald rule, saw this as an option in the "Deprecated" section.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20427
2019-04-18 05:32:45 -07:00
epriestley
aed755e1d8 Expose repository ref rules via "diffusion.repository.search"
Summary:
Depends on D20425. Ref T13277. See PHI1067. There's currently no way to retrieve branch/ref rules over the API, which makes some management operations against a large number of repositories difficult.

Expose these rules to the API.

Test Plan: Called `diffusion.repository.search`, got rules in the result set.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20426
2019-04-18 05:27:37 -07:00
epriestley
7a4ef2bad8 Move the repository "Publishing" option to the "Basics" panel in repository management
Summary:
Depends on D20424. Ref T13277. Now that the "Actions" panel only has one item ("Publishing"), just move it to the "Basics" panel.

Update the UI to show active/publishing status more clearly and relate them to one another and importing state.

Test Plan: {F6378087}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20425
2019-04-18 05:24:27 -07:00
epriestley
ec9237fe13 In repository settings, fold "Autoclose On/Off" into "Publishing On/Off"
Summary:
Depends on D20423. Ref T13277. Repositories currently have separate toggles for "Autoclose" and "Publishing".

Merge the "Autoclose" toggle into the "Publishing" toggle. I'm unaware of any valid use case for enabling one but not the other.

(This doesn't fix all the documentation, yet.)

Test Plan: Edited a repository, saw only one publishing option.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20424
2019-04-18 05:16:59 -07:00
epriestley
c7b2553ca0 Rename most user-facing "Autoclose" strings to "Permanent Refs"
Summary:
Depends on D20422. Ref T13277. Currently, "track only", "publish", and "autoclose" are three separate ideas. I'd like to generally merge them into a more natural idea called "permanent refs".

Since "Autoclose" effectively now controls both "autoclose" and "publish", rename it.

This doesn't rename all the methods or internals, and the documentation needs an update, but it renames most of the UI-facing stuff.

(You also can only specify branches as "Permanent Refs" today, but we may let you specify tags and other arbitrary refs in the future.)

Test Plan: Grepped, poked around the UI, saw UI show "Permanent" / "Permanent Refs" more often and "Autoclose" less.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20423
2019-04-18 05:14:36 -07:00
epriestley
e910c76e65 Add "Fetch Rules" to observed Git repositories
Summary:
Depends on D20421. Ref T13277. I'd generally like to move away from "Track Only".

Some of the use cases for "Track Only" (or adjacent to "Track Only") are better resolved with "Fetch Rules" -- basically, rules to fetch only some subset of refs from the observed remote.

Add configurable "Fetch Rules" for Git repositories. For example, if you only want to fetch `master`, you can now speify:

```
refs/heads/master
```

If you only want to fetch branches and tags, you can use:

```
refs/heads/*
refs/tags/*
```

In theory, this is slightly less powerful in the general case than "Track Only", but gives us better behavior in some cases (e.g., when the remote has 50K random temporary branches). In practice, I think this and a better "Autoclose Only" will let us move away from "Track Only", get default behavior which is better aligned with what users actually expect, and dodge all the "track tags/refs" questions.

Test Plan: Configured repositories with "Fetch Refs" rules, used `bin/repository pull --verbose --trace ...` to run pulls, saw expected pull/fetch behavior.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20422
2019-04-18 05:09:36 -07:00
epriestley
78aab6d4a5 When observing a repository in Git, just "fetch <url>" without worrying about the "origin" remote
Summary:
Depends on D20420. Ref T13277. We currently spend substantial effort trying to detect and correct the URL of the "origin" remote in Git repositories.

I believe this is unnecessary, and we can always `git fetch <url> ...` to get the desired result instead of `git muck-with-origin + git fetch origin ...`. We already do this in the more recent parts of the codebase (e.g., intracluster sync) and it works correctly in every case I'm aware of.

Test Plan:

  - Grepped for `origin`, ` origin `.
  - Ran `bin/repository update ...` to fetch a mirrored repository.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277

Differential Revision: https://secure.phabricator.com/D20421
2019-04-18 05:05:43 -07:00
epriestley
1cda1402c7 Do not publish/notify about commits which are not reachable from any "Autoclose" ref
Summary:
Depends on D20418. Ref T13277. Fixes T11314.

Currently, when you push commits to some arbitrary ref or tag (like `refs/pull/123` on GitHub, `refs/tags/phabricator/diff/123` on Phabricator, or `refs/changes/whatever` on Gerrit), we do not "autoclose" related objects. This means that we don't process `Ref T123` to create links to tasks, and don't process `Differential Revision: xyz` to close revisions.

However, we //do// still publish these commits. "Publish" means: trigger audits, publish feed stories, and run Herald rules.

  - Stop publishing these commits.
  - In the UI, show these commits as "Not Permanent" with a note that they are "Not [on any permanent branch]."

These commits will publish and autoclose if they ever become reachable from an "autoclose" ref (most commonly, if they are later merged to "master").

Test Plan:
  - Pushed a commit to `refs/tags/quack`.
  - Before: got a feed story.
  - After: no feed story, UI shows commit as "Not Permanent".

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277, T11314

Differential Revision: https://secure.phabricator.com/D20419
2019-04-18 05:05:00 -07:00
epriestley
904dbf0db6 Make the "git upload-pack" proxy more robust
Summary:
Depends on D20381. Ref T8093. This makes minor improvements to the protocol proxy to handle cases where we add, remove, or replace refs and may need to move the "capabilities" section.

Rather than invoking a callback on every ref: parse the whole ref list into a data structure, mutate it if necessary (in a future diff), then dump it back into wire format.

This allows us to shift the capabilities data (which needs to be coupled with the first ref) around if we modify the first ref, and reorder the reflist alphabetically like git does.

When the server has no refs, Git sends no capabilities data. This is easy to emulate, just surprising.

Test Plan:
Tested the cases not covered by D20381:

  - Fetching where the fetch actually fetches data.
  - `ls-remote` when we hide the first ref (capabilities data properly moves to the first visible ref).
  - `ls-remote` when the remote is empty (we just drop the capabilities frame completely).

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T8093

Differential Revision: https://secure.phabricator.com/D20436
2019-04-18 05:04:05 -07:00
epriestley
e08ba99dd3 Proxy the "git upload-pack" wire protocol
Summary:
Depends on D20380. Ref T8093. When prototypes are enabled, inject a (hopefully?) no-op proxy into the Git wire protocol.

This proxy decodes "git upload-pack" and allows the list of references to be rewritten, in a similar way to how we already proxy the Subversion protocol to rewrite URIs and proxy the Mercurial protocol to distinguish between read and write operations.

The piece we care about comes at the beginning, and looks like this:

```
<frame-length><ref-hash> <ref-name>\0<server-capabilities>\n
<frame-length><ref-hash> <ref-name>\n
<frame-length><ref-hash> <ref-name>\n
...
<0000>
```

We can add, remove, or modify this section to make it appear that the server has different refs than the refs that exist on disk.

Things I have tried:

  - `git ls-remote`
  - `git ls-remote` where the server hides some refs.
  - `git fetch` where the fetch is a no-op.

Things I have not tried:

  - `git fetch` where the fetch is not a no-op.
  - Tricking things into doing protocol v2. Or: I tried this, I wasn't successful. In v2, additional "\0" tricks are used to hide data in the capabilities, I think?
  - `git ls-remote` where we rewrite/hide the first ref in the list, and need to move the capabilities frame elsewhere.
  - `git ls-remote` where the server has no refs at all, or we remove every ref.

So the "interesting" piece of this works, but it almost certainly needs some cleanup to survive interaction with the real world.

Test Plan: See above.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T8093

Differential Revision: https://secure.phabricator.com/D20381
2019-04-18 04:57:51 -07:00
epriestley
35539a019c Add an optional protocol log to git SSH workflows
Summary:
Ref T8093. Support dumping the protocol bytes to a side channel logfile, as a precursor to parsing the protocol and rewriting protocol frames to virtualize refs.

The protocol itself is mostly ASCII text so the raw protocol bytes are pretty comprehensible.

Test Plan:
{F6363221}

{F6363222}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T8093

Differential Revision: https://secure.phabricator.com/D20380
2019-04-18 04:57:04 -07:00
epriestley
c648077625 Don't warn about a locked database value after users run "bin/auth lock"
Summary: Ref T7667. Also one text fix.

Test Plan: Ran `bin/auth lock`, didn't get a replacement setup issue.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T7667

Differential Revision: https://secure.phabricator.com/D20447
2019-04-17 19:54:11 -07:00
epriestley
02cfcfa079 Hide revision dependency stories from feed/notifications
Summary:
See PHI1134. Generally, "alice added a dependent revision: ..." isn't a very interesting story. This relationship itself is valuable, but the creation of the relationship is usually pretty obvious from context.

In the specific case of PHI1134, various scripts are racing one another, but I don't think this story is of much value in the general case anyway.

Test Plan: Edited parent/child revisions, no more feed stories.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20437
2019-04-17 17:08:14 -07:00
epriestley
382e2c32fc When an invalid "constraints" parameter is provided to a "*.search" method, raise a more tailored error
Summary:
See <https://discourse.phabricator-community.org/t/constraints-parameter-type-handling-in-maniphest-search/2636>.

(The caller provided `constraints={...}` via cURL, but you can't mix JSON and HTTP parameters like that.)

Test Plan: Called `curl 'http://local.phacility.com/api/maniphest.search?api.token=...&constraints=X'` (with a valid API token), got a more sensible error.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20429
2019-04-17 13:17:07 -07:00
epriestley
23b86bae6c Accept pushes with arbitrary Git refs
Summary:
Depends on D20419. Ref T13277. Fixes T8936. Fixes T9383. Fixes T12300. When you push arbitrary refs to Phabricator, the push log currently complains if those refs are not tags or branches.

Upstream Git now features "notes", and there's no reason to prevent writes to arbitrary refs, particularly beause we plan to start using them soon (see T13278).

Allow these writes as affecting raw refs.

Test Plan:
  - Pushed an arbitrary ref.
  - Pushed some Git notes.
  - Wrote a Herald ref rule, saw "ref" in the dropdown.

{F6376492}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13277, T8936, T9383, T12300

Differential Revision: https://secure.phabricator.com/D20420
2019-04-17 12:43:20 -07:00
epriestley
870b01f2d0 Distinguish between "bad record format" and "bad record value" when validating Trigger rules
Summary:
Depends on D20416. Ref T13269. See D20329.

If you try to save an "Assign to" rule with no assignee, we currently replace the control with an "InvalidRule" control that isn't editable. We'd prefer to give you an empty field back and let you pick a different value.

Differentiate between "bad record format" (i.e., we can't really do anything with this) and "bad record value" (i.e., everything is structurally fine, you just typed the wrong thing). In the latter case, we still build a properly typed rule for the UI, we just refuse to update storage until you fix the problem.

Test Plan:
First, hit the original issue and got a nicer UI with a more consistent control width (note full-width error):

{F6374205}

Then, applied the rest of the patch and got a normal "fix the issue" form state instead of a dead-end:

{F6374211}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13269

Differential Revision: https://secure.phabricator.com/D20417
2019-04-17 12:40:55 -07:00
epriestley
5b6d6c4fb3 Use repository identities, not denormalized strings, to identify authors for "Revision closed by commit X" stories
Summary:
Ref T12164. Ref T13276. Currently, the parsing pipeline copies the author and committer names and PHIDs into the transcaction record as metadata. They are then rendered directly from the metadata.

This makes planned changes to the parsing pipeline (to prevent races when multiple commits matching a single revision are pushed simultaneously) more difficult, and generally won't work with repository identities.

Instead, load the commit and use its identities.

Test Plan: Loaded a revision, saw the same story rendering for a "Closed by commit" story.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13276, T12164

Differential Revision: https://secure.phabricator.com/D20418
2019-04-17 12:24:49 -07:00
epriestley
9532bfbb32 Improve trigger editor behavior when switching to/from tokenizers
Summary:
Ref T13269. See D20329. When we switch trigger rule control types, reset the rule value.

Also, pick slightly nicer defaults for status/priority.

Test Plan:
  - Created a "Change Status To: X" rule.
  - Saved it.
  - Edited it.
  - Selected "Assign to" for the existing action's dropdown.
  - Before: tokenizer filled with nonsense.
  - After: tokenizer cleared.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13269

Differential Revision: https://secure.phabricator.com/D20416
2019-04-17 12:24:23 -07:00
epriestley
b8551bb5f9 Reduce drag-and-drop jank on dashboards
Summary:
Depends on D20414. Ref T13272. Several minor things here:

  - Currently, you can drag panels underneath the invisible "there are no items in this column" div and the "Create Panel / Add Existing Panel" buttons. This is silly; stop it.
  - Currently, when viewing a tab panel on a dashboard, you can drag the panels inside it. This is extremely silly. Make "movable" off by default and pass it through the async flow only when we actually need it.
  - Make the whole "Add Tab..." virtual tab clickable to open the dropdown. This removes the rare exception/todo combo I added earlier. {key F}
  - Add or remove some icons or something.

Test Plan: Moved panels around on dashboards. Tried to drag panels inside tab panels. Added tab. Things were less obviously broken.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20415
2019-04-17 12:20:44 -07:00
epriestley
e99c1974b0 Fix the "Add Query to Dashboard..." flow from "Use Results" on search result pages
Summary:
Depends on D20413. Ref T13272. When you search for stuff, you can "Use Results > Add to Dashboard" to generate a query panel.

This needs some updating after the recent refactoring. All the changes are pretty straightforward. Swaps a giant `<select />` for a tokenizer with a datasource.

Test Plan: Used the "Use Results > Add to Dashboard" flow to create a panel on a dashboard using a query.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20414
2019-04-17 12:18:52 -07:00
epriestley
4b8a67ccde Index and show Owners packages affected by Herald rules
Summary:
Depends on D20412. See PHI1147.

  - Index the targets of "Add Reviewer", "Add Blocking Reviewer", "Add Auditor", "Add Subscriber", and "Remove Subscriber" Herald rules. My major goal is to get Owners packages. This will also hit projects/users, but we just don't read those edges (for now, at least).
  - Add a "Related Herald Rules" panel to Owners Package pages.
  - Add a migration to reindex Herald rules for the recent build plan stuff and this, now that such a migration is easy to write.

Test Plan:
Ran migration, verified all rules reindexed.

{F6372695}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam

Differential Revision: https://secure.phabricator.com/D20413
2019-04-17 12:17:30 -07:00
epriestley
4eab3c4c8d Reindex dashboards and panels (allow migrations to queue a job to queue other indexing jobs)
Summary:
Depends on D20411. Ref T13272. Dashboards and panels have new indexes (Ferret and usage edges) that need a rebuild.

For large datasets like commits we have the "activity" flow in T11932, but realistically these rebuilds won't take more than a few minutes on any realistic install so we should be able to just queue them up as migrations.

Let migrations insert a job to basically run `bin/search index --type SomeObjectType`, then do that for dashboards and panels.

(I'll do Herald rules in a followup too, but I want to tweak one indexing thing there.)

Test Plan: Ran the migration, ran `bin/phd debug task`, saw everything get indexed with no manual intervention.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20412
2019-04-17 12:05:49 -07:00
Austin McKinley
0583f6dc50 Some formatting changes for showing auth provider config guidance
Summary:
Ref T7667. On the road to locking the auth config, also clean up some minor UI issues:

* Only show the warning about not Phacility instance auth if the user isn't a manager (see next diff).
* When rendering more than one warning in the guidance, add bullets.
* I didn't like the text in the `auth.config-lock` config setting.

Test Plan: Loaded the page, saw more reasonable-looking guidance: {F6369405}

Reviewers: epriestley

Reviewed By: epriestley

Subscribers: Korvin

Maniphest Tasks: T7667

Differential Revision: https://secure.phabricator.com/D20400
2019-04-17 11:08:16 -07:00
epriestley
e7a31832bf Show a warning when "git" is too old to support filesize limits
Summary: See <https://discourse.phabricator-community.org/t/git-push-failed-with-filesize-limit-on/2635/2>

Test Plan: {F6378519}

Reviewers: amckinley, avivey

Reviewed By: avivey

Differential Revision: https://secure.phabricator.com/D20431
2019-04-16 05:33:29 -07:00
epriestley
5a2d0f0437 Update documentation for "uri.allowed-protocols"
Summary: See <https://discourse.phabricator-community.org/t/download-tasks-and-others-as-excel-throw-exception/>.

Test Plan: Read config.

Reviewers: amckinley, avivey

Reviewed By: avivey

Subscribers: avivey

Differential Revision: https://secure.phabricator.com/D20430
2019-04-16 05:23:13 -07:00
epriestley
f13709b13b Update search indexes for Dashboards and Panels to Ferret, plus various minor fixes
Summary:
Depends on D20410. Ref T13272. Dashboards/Panels currently use older "ngram" indexing, which is a less-powerful precursor to Ferret. Throw away the ngram index and provide a Ferret index instead. Also:

  - Remove the NUX state, which links to the wrong place now and doesn't seem terribly important.
  - Add project tags to the search result list.
  - Make the "No Tags" tag a little less conspicious.

Test Plan:
  - Indexed dashboards and panels.
  - Searched for dashboards and panels via SearchEngine using Ferret "query" field.
  - Searched for panels via "Add Existing Panel" datasource typeahead.
  - Searched for dashboards via "Add Menu Item > Dashboard" on a ProfileMenu via typeahead.
  - Viewed dashboard NUX state (no special state, but no more bad link to "/create/").
  - Viewed dashboard list, saw project tags.
  - Viewed dashboards with no project tags ("No Tags" is now displayed but less visible).

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20411
2019-04-14 10:28:19 -07:00
epriestley
80b7274e0b Remove legacy "DashboardInstall" table
Summary: Depends on D20409. Ref T13272. Before "ProfileMenu", dashboards were installed on specific objects using this table. Installs are now handled via ProfileMenu and this table no longer has any meaningful readers. Remove references to the table and destroy it.

Test Plan: Grepped for `DashboardInstall`.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20410
2019-04-14 10:27:52 -07:00
epriestley
fb994909cf Make "Move Panel" on dashboards use the new storage and transactions
Summary: Depends on D20408. Ref T13272. The actual JS is still a little bit iffy, but this makes the server side "move" operation work correctly by updating it to use the same code as everything else.

Test Plan: Moved panels around on single-column and multi-column dashboards, saw them move to reasonable places and stay there when I reloaded the page.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20409
2019-04-14 10:25:22 -07:00
epriestley
82c46f4b93 Update "add panel" and "remove panel" Dashboard flows to the new panel storage format
Summary:
Depends on D20407. Ref T13272. This updates the "add panel" (which has two flavors: "add existing" and "create new") and "remove panel" flows to work with the new duplicate-friendly storage format.

  - We now modify panels by "panelKey", not by panel PHID, so one dashboard may have multiple copies of the same panel and we can still figure out what's going on.
  - We now work with "contextPHID", not "dashboardID", to make some flows with tab panels (or other nested panels in the future) easier.

The only major remaining flow is the Javascript "move panels around with drag-and-drop" flow.

Test Plan:
  - Added panels to a dashboard with "Create New Panel".
  - Added panels to a dashboard with "Add Existing Panel".
  - Removed panels from a dashboard.
  - Added and removed duplicate panels, got a correctly-functioning dashboard that didn't care about duplicates.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20408
2019-04-14 10:24:58 -07:00
epriestley
a3c43c473b Convert dashboard read/display pathways to the new panel storage format
Summary:
Depends on D20406. Ref T13272. This gets about half of Dashboards working with the new "duplicate panel friendly" storage format. Followups will fix the write pathways.

Collateral damage here includes:

  - Remove the old Dashboard/Panel edge type. We have a new, more general edge type for "container X uses panel Y", and we don't need this edge type for anything else.
  - Remove "attachPanels()" from Dashboard. Only rendering actually needs this, and it can just load the panels.
  - Remove "attachPanelPHIDs()" from Dashboard. We can look at the panel refs to figure this out.
  - Remove "attachProjects()" from Dashboard. Nothing uses this and it's not a very modern approach.
  - `getPanelPHIDs()` just looks at the config now.
  - Deleted some `LayoutConfig`-related code which is broken/obsolete.

Test Plan:
  - Viewed various dashboards which were created before the changes, saw them render correctly.
  - Viewed a dashboard with two of the same panel! AMAZING!

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20407
2019-04-14 10:23:42 -07:00
epriestley
0381eed6e6 Modularize dashboard layout modes (one column, two columns, etc)
Summary:
Depends on D20405. Ref T13272. Currently, the `PhabricatorDashboardLayoutConfig` class uses a lot of `switch()` statements to define layout modes.

Although I'm not planning to add thousands of new layout modes, this (and upcoming changes) can be made substantially cleaner by using a standard modular approach.

(This doesn't fully remove `PhabricatorDashboardLayoutConfig` yet, but that will happen soon.)

Test Plan: Edited a dashboard, saw the same layout modes as before.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20406
2019-04-14 10:22:59 -07:00
epriestley
2ae7d612f2 Fix a missing pht() in Ponder
Summary: See <https://discourse.phabricator-community.org/t/translation-in-ponder/2630>.

Test Plan: Viewed a Ponder question page with no answers yet.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20404
2019-04-12 12:18:56 -07:00
epriestley
ce723f999d Move Dashboards main edit flow to EditEngine
Summary:
Depends on D20402. Ref T13272. Replaces an old-school hard-coded "EditController" with a more modern one.

The actual panel stuff is still using a weird mix of legacy manual `save()` calls, but that's up next.

Test Plan: Created Dashboards, edited all dashboard fields via "Edit Dashboard".

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20403
2019-04-12 06:15:15 -07:00
epriestley
6fac904463 Modularize Dashboard transactions
Summary:
Depends on D20399. Ref T13272. I'm moving toward fixing all the "moving panels around on Dashboards breaks the entire world" problems.

On the way there, modularize Dashboard transactions.

Test Plan:
  - Created a new Dashboard.
  - Edited all fiedls of a dashboard.
  - Archived/restored a dashboard.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20402
2019-04-12 06:14:51 -07:00
epriestley
51f2ed498d On panel pages, show where panels are used
Summary:
Depends on D20398. Ref T13272. Fixes T6018. Previously, panels showed "used on dashboards: x, y", but this did not include cases where a panel was used by another container panel (today, a tab panel).

Do edge indexing when a dashboard or panel is saved, then pull the edges on the Panel page so we can provide a full list of uses.

Test Plan: {F6369289}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272, T6018

Differential Revision: https://secure.phabricator.com/D20399
2019-04-12 06:14:21 -07:00
epriestley
d62f4dbfc9 Index and surface usage sites for Dashboards
Summary:
Depends on D20397. Ref T13272. Similar to the recent "where are Herald rules used" stuff, show which menus Dashboards are installed in.

This is mostly straightforward, except that I pulled some of the Herald logic into a parent class so it could be shared.

Test Plan: {F6369164}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20398
2019-04-12 06:13:44 -07:00
epriestley
cbe13b3065 When editing a tab panel from a dashboard, redirect back to the dashboard
Summary:
Depends on D20396. Ref T13272. Currently, using the dropdowns to edit a tab panel from a dashboard redirects you to the tab panel page.

Instead, redirect back to the context page (usually, a dashboard -- but theoretically a containing tab panel, since you can put tab panels inside tab panels).

Also, fix some JS issues with non-integer panel keys. I've moved panel keys from "0, 1, 2, ..." to having arbitrary keys to make some operations less flimsy/error-prone, but this needs some JS tweaks.

Test Plan: Edited a tab panel from a dashboard, got sent sensibly back to the dashboard.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20397
2019-04-12 06:13:12 -07:00
epriestley
9ad9ac9be6 On Dashboard tab panels in edit mode, make the "Tab Name" and the "Dropdown Edit Caret" into different links
Summary:
Ref T13272. In edit mode, tab panels now have a dropdown menu. However, this sort of overrlaps with the actual action of clicking the tab to select it.

Separate these into different click targets so that "select tab X" and "open dropdown menu for X" are different operations.

This is more work than it appears because:

  - We have an "action icon" already, used when you put a dashboard on a portal/home to create an "Edit" link. It makes sense to attach dropdowns to this, but it has some hard-coded stuff.
  - In applications with a "Create <thing>" in the crumbs (like Maniphest), we may use a dropdown menu if there are multiple create forms available. However, this menu renders in a weird way by reading all the properties out of an actual "View" object and building something else.
  - The "list of tabs" stuff shares code with different "list of tabs" navigation used by Diffusion and Instances.

..but I think I fixed everything and didn't break anything.

Test Plan:
  - Clicked "select tab" and "open dropdown menu" as separate actions.
  - Viewed Diffusion, Maniphest with multiple create forms, Instances.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20396
2019-04-12 06:08:32 -07:00
epriestley
d02256df3c Remove very old "vsDiff" data from commit update / diff extraction pipeline
Summary:
Ref T13276. This was introduced in D2586 to power a "trigger audits when the committed change does not match the reviewed change" feature. It was removed without ceremony in D15939. Broadly, rebases mean that this sort of feature can't really work like this and this approach is inherently unreliable; see also T182.

This property no longer has readers, and is unlikely to get any in the future since my planned pathway for "committed code must match reviewed code, modulo an automated rebase" is automating the rebase via "Land Revision", not comparing the diff text.

Remove this to simplify the flow of data here so that things in T13276 can be fixed more easily.

Test Plan: Grepped for `vsDiff`, no hits.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13276

Differential Revision: https://secure.phabricator.com/D20395
2019-04-11 08:55:23 -07:00
Austin McKinley
0f9776fb58 Add a workflow and a new config option for locking authentication providers
Summary:
Ref T7667. Adds new flows `bin/auth lock` and `bin/auth unlock` to prevent compromised administrator accounts from doing additional damage by altering the authentication provider configuration.

Note that this currently doesn't actually do anything because we aren't checking this config key in any of the edit controllers yet.

Test Plan: Ran `lock` and `unlock`, checked for correct DB state, observed expected setup warning.

Reviewers: epriestley

Reviewed By: epriestley

Subscribers: Korvin

Maniphest Tasks: T7667

Differential Revision: https://secure.phabricator.com/D20394
2019-04-10 16:14:48 -07:00
epriestley
89d038f53e Make Portals indexable with Ferret
Summary:
Ref T13275. Add portals to the search index so that:

  - they show up in fulltext global search; and
  - the typeahead actually uses an index.

Also make them taggable with projects as an organizational aid.

Test Plan: Indexed portals with `bin/serach index`, searched for a portal with "Query", with fulltext search in main menu, with typehead on "Install Dashboard...", changed the name of a portal and searched again to check that the index updates properly.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam

Maniphest Tasks: T13275

Differential Revision: https://secure.phabricator.com/D20389
2019-04-10 13:33:54 -07:00
Austin McKinley
26ee9274ca Change docs to be consistent with script
Summary:
Ref https://discourse.phabricator-community.org/t/upgrade-article-process-doesnt-match-script/2598.

I personally prefer "stop the server and then pull" to reduce the risk of scary "served half the request from one version and half from another", but I think this is hard to pull off with correctly configured APC caches.

Test Plan: Mk.1 eyeball

Reviewers: epriestley

Reviewed By: epriestley

Subscribers: Korvin

Differential Revision: https://secure.phabricator.com/D20391
2019-04-10 12:38:33 -07:00
Austin McKinley
55d64d0fab Add trigger rule to remove projects from tasks
Summary: Ref T13269. Same as D20379 with the polarity reversed.

Test Plan: Added some triggers, removed some projects, observed expected results.

Reviewers: epriestley

Reviewed By: epriestley

Subscribers: Korvin

Maniphest Tasks: T13269

Differential Revision: https://secure.phabricator.com/D20390
2019-04-10 12:27:01 -07:00
Austin McKinley
8b475898ee Add trigger rule for adding projects to a task
Summary: Ref T13269. This is mostly copying code from the similar Herald implementation. Note that the drop effect preview always renders because we don't have the infrastructure to compare lists of edge targets.

Test Plan: Created some triggers, dragged some tasks around, checked that tasks that already had project membership didn't write additional edges.

Reviewers: epriestley

Reviewed By: epriestley

Subscribers: Korvin

Maniphest Tasks: T13269

Differential Revision: https://secure.phabricator.com/D20379
2019-04-10 12:10:08 -07:00
epriestley
1a52c8f713 Surface custom form instructions as a "Remarkup" field for the transaction layer
Summary: Ref T13263. See <https://discourse.phabricator-community.org/t/image-uploads-for-forms-too-restricted-by-default/2594>. Currently, when you add instructions to a custom form, we don't expose them as remarkup, so `{Fxxx}` references don't get attached correctly and won't get proper permissions.

Test Plan:
Dragged-and-dropped an image into form instructions, saw the file attach to the form:

{F6367710}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13263

Differential Revision: https://secure.phabricator.com/D20387
2019-04-10 11:13:03 -07:00
epriestley
9e65e6c503 Support "JIRA Issue URIs" as a Herald field for revisions
Summary:
See PHI1175. An install would like to trigger some reminders/guidance if users don't link revisions to JIRA issues.

Expose "JIRA Issue URIs" as a field so Herald can act on the presence or absence of issues.

I'm exposing "JIRA Issue URIs", not a field like "[ Has Jira Issue ][ is true ]", since it's a bit more flexible: you can use a regexp to test against particular `PROJ-123` project prefixes in JIRA, for example.

Test Plan: {F6367696}

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20386
2019-04-10 11:12:01 -07:00
epriestley
a35fda2019 Rebuild Dashboards on EditEngine: v1 Major Jank Edition
Summary:
Depends on D20383. Ref T13272. Fixes T12363. See PHI997. This gets the edit flows for tab panels functional again. They aren't //nice//, and a lot of the workflows are fairly janky: for example, most of them end up with you on the tab panel's page, which isn't useful if you started on a dashboard page.

However, these flows were extremely janky before anyway (see T12363) and I suspect this is a net improvement even though it's a bit of a mess. I anticipate cleaning this up bit-by-bit in future diffs.

Test Plan: {F6366372}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272, T12363

Differential Revision: https://secure.phabricator.com/D20384
2019-04-10 08:59:32 -07:00
epriestley
fb19310631 Fix some overlooked profile menu construction callsites
Summary: Depends on D20384. Ref T13275. A bunch of this code got converted but I missed some callsites that aren't reached directly from the menu.

Test Plan:
  - Visited each controller, saw actual pages instead of menu construction fatals.
  - Grepped for `getProfileMenu()`.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13275

Differential Revision: https://secure.phabricator.com/D20385
2019-04-09 14:47:44 -07:00
epriestley
41afc7c7e6 Rebuild query panels on top of EditEngine
Summary: Depends on D20377. Ref T13272. In D20372, I temporarily removed the controls for actually editing Query panels. Restore them.

Test Plan:
  - Viewed existing Query panels, saw them working like they did before.
  - Created and edited Query panels.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20382
2019-04-09 14:08:41 -07:00
epriestley
8d24e3a21a When a dashboard has inconsistent panel policies: keep doing nothing
Summary:
Depends on D20376. Ref T8033. It's possible to put a bunch of secret panels on a public dashboard, and not obvious that the dashboard won't be very useful.

This was more of an issue long ago (when the dashboard broke or all the panels completely vanished or something?). Nowadays, the panels render "You don't have permission to view this" so it's likely easy to explain/fix. Still, we can warn about this.

But, for now, don't, since a lot of this works better now and it's not really clear that this is particularly valuable. We can revisit this after all the connected changes have more of a chance to settle.

Test Plan:
(Earlier behavior, not how things look in the final version.)

{F6335008}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T8033

Differential Revision: https://secure.phabricator.com/D20377
2019-04-09 14:04:15 -07:00
epriestley
2bd1bb52e4 On Dashboards, distinguish between invalid panels and restricted panels
Summary:
Depends on D20374. Panels may not be visible if they are restricted (no permission) or if they are invalid (e.g., the panel was deleted).

Render these as two separate states instead of one big combined state.

Test Plan: {F6334756}

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20376
2019-04-09 14:00:13 -07:00
epriestley
4d0904ef95 Make "Favorites" work more like other customizable menus
Summary:
Depends on D20373. Ref T13272. When you put Dashboards in Favorites, the render without a navigation menu, which is kind of weird.

Instead, make Favorites display a navigation menu. This effectively turns it into a weird cross between the home page and a portal, but so be it.

Also change the icon from "star" to "bookmark" since I think that a clearer hint about how it works.

Test Plan: Viewed dashboards in favorites, got a navigation menu. Edited items from portals, home, favorites.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20374
2019-04-09 13:59:35 -07:00
epriestley
a1a89589b1 Make the Dashboard dropshadow a little lighter and turn panel management into a menu
Summary:
Depends on D20372. Ref T13272.

  - There's a very heavy dropshadow on panels right now that looks out of place. Reduce it a bit.
  - Panels currently have unlabeled pencil and trash icons. Turn this into a menu. I'm likely planning to add options like "Change Query..." to this menu to make managing some types of panels easier.

Test Plan: {F6332838}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20373
2019-04-09 13:58:38 -07:00
epriestley
b1e2d3cd29 Use EditEngine, not CustomFields, to define Dashboard Panel edit behavior
Summary:
Depends on D20371. Ref T13272. Dashboard panels use CustomField to specify editable panel behavior. This is an older approach which was largely or entirely obsoleted by EditEngine.

Throw away all the CustomField edit stuff. Convert the "text" panel to EditEngine to prove this at least mostly works.

This breaks "query" panels and "tab" panels (they'll still work fine, but they can't be meaningfully edited). I'll restore those in a future change.

Test Plan: Created and edited a "text" panel.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20372
2019-04-09 13:57:48 -07:00
epriestley
68d969094f Mostly replace the old panel "Edit" controller with the new "Editpro" controller
Summary:
Depends on D20370. Ref T13272. This tries to get panel editing fully on the newer "Modular Transactions" + "EditEngine" flow.

This breaks tab panels a bit, but I'll fix that in a followup. And they weren't exactly in great shape before.

Also makes the flow prettier. :3

Test Plan: {F6332746}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20371
2019-04-09 13:56:17 -07:00
epriestley
81b58dba8f Modularize Dashboard Panel transactionns
Summary: Depends on D20369. Ref T13272. Move toward a world where we can edit panels with just one controller, instead of separate "Edit" and "Editpro" controllers.

Test Plan: Created and edited panels. This will get vetted more thoroughly after additional changes.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20370
2019-04-09 13:37:27 -07:00
epriestley
597ef60d7e Move Dashboard panel controllers into a "panel/" subdirectory
Summary:
Depends on D20368. Ref T13272. Dashboards have a lot of controllers, try to organize them a little better.

Note "EditController" vs "EditproController". Yikes.

Test Plan: Loaded dashboards. No code changes.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20369
2019-04-09 13:36:17 -07:00
epriestley
f504f40ee5 Put "workflow" on Dashboard edit links when they're disabled
Summary:
Depends on D20367. Ref T13272. When an edit action is disabled, we add "workflow" so that the "You can't do this" message renders in a dialog instead of a separate page.

These actions are implemented in a nonstandard way; standardize them.

Test Plan: Clicked both actions as a user who could take them (got normal behavior); and as a user who could not (got permissions dialog errors).

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20368
2019-04-09 13:35:37 -07:00
epriestley
5b38d2142c Remove the dashboard "template" workflow
Summary:
Depends on D20364. Ref T13272. When you create a dashboard, we currently give you a modal choice between an empty dashboard and a "simple template" dashboard.

Remove this choice, and create an empty dashboard in all cases instead.

I think this template dashboard flow isn't terribly useful, and is partly covering over other deficiencies in the workflow. I'm fixing many of those and suspect we can get away without this now. Users on this flow also may not really know what they want. This also contributes to having a lot of extra unmoored panels floating around.

If we did rebuild this, I'd like to address more specific use cases and probably build it as "Add a Template Panel..." or similar, as an action you can use to quickly update an existing workboard. This would be a lot more flexible than create-a-whole-template-board.

Test Plan: Created a new board, no more "template: yes or no?" gate.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20367
2019-04-09 13:34:51 -07:00
epriestley
12b9224387 Make the "Install Dashboard" flow smoother
Summary:
Depends on D20362. Ref T13272. Currently, Dashboards have an "Install Dashboard" flow which is pretty janky and only allows you to install things to the home page.

Instead, allow users to install things to any valid target (home, favorites, portals, projects). This also provides URIs like `dashboard/install/1/home/personal/` which allow you to link users to an "install a dashboard" page; this may or may not get used.

Test Plan: Installed dashboards on home, favorites, projects, and portals.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20364
2019-04-09 13:34:09 -07:00
epriestley
eea093bec8 Combine the "View", "Arrange", and "Manage" modes of Dashboards into a single mode
Summary:
Depends on D20361. Ref T13272. Currently, Dashboards have three separate modes: view, arrange, manage.

With the advent of Portals, I think we can simplify this, and make the dashboard view a combined view/edit/manage page. To view it in a cleaner standalone way, you can add it to a portal/home/project. I'll also improve the "Install" workflow.

Test Plan:
Viewed a dashboard page, clicked through all the actions, grepped for affected URIs.

{F6327027}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20362
2019-04-09 13:32:36 -07:00
Austin McKinley
7e1743a959 Add a trigger rule to reassign a task
Summary:
Ref T13269. Workboard triggers can now reassign tasks on column drop. Also sprinkles some `setViewer()` calls in places that needed them.

This mostly works, but a few issues:

* To set the owner to unassigned, you must explicitly put the "No Owner" token in the typeahead. Maybe this should just figure out you've put nothing in that field and set it for you?
* I'm pretty sure this was already broken, but if you change the rule type from a tokenizer to a different type, the default for the field doesn't populate correctly: {F6312227}

Also adds a new hook for trigger rules: `getValueForField($value)` which allows you to transform a value stored in the DB into a form suitable for setting on a form control.

Test Plan: Dragged tasks between columns and observed new owners as expected. Didn't try to get fancy to assign tasks to deleted users, users that the viewer can't see, bot users, etc etc. I'm relying on the underlying transaction to hopefully do the right thing.

Reviewers: epriestley

Reviewed By: epriestley

Subscribers: Korvin

Maniphest Tasks: T13269

Differential Revision: https://secure.phabricator.com/D20329
2019-04-05 09:17:20 -07:00
epriestley
e45ccdd892 Fix rendering of offset-paged query panels including "Notifications"
Summary:
See <https://discourse.phabricator-community.org/t/call-to-undefined-method-phuipagerview-gethasmoreresults-in-2019-week-13/2586/>.

A small number of queries (including "Notifications" and (global) "Search") use offset-based pagers which have a slightly different API `PHUIPagerView` instead of `AphrontCursorPagerView`. This leads to a fatal in the new code for the "View All Results" buttons.

To fix this, just do an `instanceof` test. Some day we can unify the pagers.

Test Plan: Added a notifications panel, rendered it, saw it work instead of fataling on "getHasMoreResults()". Also rendered some normal panels.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20366
2019-04-04 06:21:38 -07:00
epriestley
248d79f36d Fix "Actions" button on Phame standalone/live pages (bonus: JX.sprintf())
Summary:
See <https://discourse.phabricator-community.org/t/non-functional-actions-menu-on-live-phame-views/2593>. Several layers here:

The "Actions" button is broken because a menu behavior is failing, since we aren't rendering the menu.

When a behavior fails to initialize, catch and log the exception and continue. Previously, we stopped initializing behaviors if any failed, but behaviors are usually independent and continuing with an explicit exception seems reasonable.

Give "JX.log()" some "sprintf()" semantics to make logging the behavior failure easier. We can probably afford these extra 200 bytes now in 2019.

This fixes the button and gives us explicit errors in the log. So far, so good.

Then, when a page won't render chrome, don't try to render the main menu. This fixes the actual errors (we no longer try to initialize menu behaviors for nodes which don't exist).

Completely hide the "Actions" and "Comment" flows if the viewer isn't logged in. Although this isn't completely consistent with other applications, I think it's more appropriate for Phame. In applications like Maniphest, we show a full set of controls (but disable them) so that users who are not currently logged in have a clear path to interact with the content, under the assumption that this is a relatively common workflow. This is probably less common for Phame, where we expect most anonymous viewers not to log in or interact.

Finally, parametrize a one-off border color and add a border under the crumbs at the top of the page.

Test Plan:
  - Viewed a "Live" Phame blog post page, clicked "Actions", got a dropdown.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20378
2019-04-04 06:10:14 -07:00
epriestley
18732a0d2f Make Portals reachable without knowing the URI
Summary:
Depends on D20360. Ref T13275. This makes the "Dashboards" application start on a Drydock-like console page where you pick portals, dashboards, or panels.

Probably the "Dashboards" application should either be renamed to "IntelliknowledgePro" or Portals should be split off into a separate application eventually, but let's see how things go like this for now, since restructuring probably breaks some URIs at least a little bit so I'd like more confidence that we're headed in the right direction before we do it.

Test Plan:
  - Visited Dashboards via typeahead, got options for Dashboards/Portals/Panels.
  - Visited Portals pages, got simplified crumbs.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13275

Differential Revision: https://secure.phabricator.com/D20361
2019-04-02 15:23:36 -07:00
epriestley
c9d3fb2ac5 Fix the incorrect link target for "Create Revision" as a Menu Item
Summary:
Depends on D20359. Fixes T12098. When you add a new "Form" item and pick "Create Revision", you currently get a bad link. This is because Differential is kind of special and the form isn't usable directly, even though Differential does use EditEngine.

Allow EditEngine to specify a different create URI, then specify the web UI paste-a-diff flow to fix this.

Test Plan:
  - Added "Create Revision" to a portal, clicked it, was sensibly put on the diff flow.
  - Grepped for `getCreateURI()`, the only other real use case is to render the "Create X" dropdowns in the upper right.
    - Clicked one of those, still worked great.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T12098

Differential Revision: https://secure.phabricator.com/D20360
2019-04-02 15:21:59 -07:00
epriestley
dfe47157d3 When picking a default menu item to render, don't pick disabled items
Summary:
Depends on D20358. Fixes T12871. After refactoring, we can now tell when a "storage" menu item generated only disabled "display" menu items, and not pick any of them as the default rendering.

This means that if you're looking at a portal/menu with several dashboards, but can't see some at the top, you'll get the first one you can see.

Also clean up a lot of minor issues with less-common states.

Test Plan:
  - Created a portal with two private dashboards and a public dashboard.
  - Viewed it as another user, saw the default view show the dashboard I can actually see.
  - Minor fix: Disabled and enabled the hard-coded "Home" item, now worked cleanly with the right menu state.
  - Minor fix: added a motivator panel.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T12871

Differential Revision: https://secure.phabricator.com/D20359
2019-04-02 15:21:27 -07:00
epriestley
5192ae4750 Update all existing ProfileMenuItems for the more-structured API
Summary:
Depends on D20357. Ref T13275. Now that there's a stronger layer between "stuff in the database" and "stuff on the screen", these subclasses all need to emit intermediate objects instead of raw, HTML-producing view objects.

This update is mostly mechanical.

Test Plan:
  - Viewed Home, Favorites, Portals, User Profiles, Project Profiles.
  - Clicked each item on each menu/profile type.
  - Added every (I think?) type of item to a menu and clicked them all.
  - Grepped for obsolete symbols (`newNavigationMenuItems`, `willBuildNavigationItems`).

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13275

Differential Revision: https://secure.phabricator.com/D20358
2019-04-02 15:20:39 -07:00
epriestley
950e9d085b In ProfileMenu, put more structure between "stored/configured items" and "display items"
Summary:
Depends on D20356. Ref T13275. See also T12871 and T12949.

Currently, the whole "ProfileMenu" API operates around //stored// items. However, stored items are allowed to produce zero or more //display// items, and we sometimes want to highlight display item X but render stored item Y (as is the case with "Link" items pointing at `?filter=xyz` on Workboards).

For the most part, this either: doesn't work; or works by chance; or is kind of glued together with hope and prayer (as in D20353).

Put an actual structural layer in place between "stored/configured item" and "display item" that can link them together more clearly. Now:

  - The list of `ItemConfiguration` objects (stored/configured items) is used to build an `ItemViewList`.
  - This handles the selection/highlighting/default state, and knows which display items are related to which stored items.
  - When we're all done figuring out what we're going to select and what we're going to highlight, it pops out an actual View which can build the HTML.

This requires API changes which are not included in this change, see next change.

This doesn't really do anything on its own, but builds toward a more satisfying fix for T12871. I'd hoped to avoid doing this for now, but wasn't able to get a patch I felt good about for T12871 built without fixing this first.

Test Plan: See next change.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13275

Differential Revision: https://secure.phabricator.com/D20357
2019-04-02 15:19:59 -07:00
epriestley
971a272bf6 Automatically build mobile menus from navigation, and clean up external ProfileMenu API
Summary:
Depends on D20355. Ref T13275. Ref T13247. Currently, "Hamburger" menus are not automatically built from navigation menus. However, this is (I'm almost completely sure?) a reasonable and appropriate default behavior, and saves us some code around profile menus.

With this rule in place, we can remove `setApplicationMenu()` and `getApplicationMenu()` from `StandardPageView`, since they have no callers.

This also updates a lot of profile menu callsites to a new API which is added in the next change.

Test Plan: See the next two changes.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13275, T13247

Differential Revision: https://secure.phabricator.com/D20356
2019-04-02 15:17:44 -07:00
epriestley
47bf382435 Allow profile menu items to be locked to the top or bottom of the menu
Summary:
Depends on D20353. Ref T13275. This is just some small quality-of-life fixes:

  - When you add items to menus, they currently go below the "Edit Menu/Manage Menu" links by default. This isn't a very good place for them. Instead, lock "edit" items to the bottom of the menu.
  - Lock profile pictures to the top of the menu. This just simplifies things a little.
  - Show more iconography hints on the "edit menu items" UI.
  - Add a "drag stuff to do things" hint if some stuff can be dragged.

Test Plan:
  - Added new items to a Portal, they didn't go to the very bottom. Instead, they went above the "Edit/Manage" links; a sensible place for them.
  - Viewed the "edit menu items" screen, saw more hints and visual richness.
  - Viewed/edited Home, Projects, Portals, Favorites

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13275

Differential Revision: https://secure.phabricator.com/D20355
2019-04-02 15:08:20 -07:00
epriestley
36a8b4ea17 When a ProfileMenu has a link item that adds URI parameters, highlight it when clicked
Summary:
Depends on D20352. Fixes T12949. If a user adds a link (for example, to a workboard) that takes you to the same page but with some URI parameters, we'd prefer to highlight the "link" item instead of the default "workboard" item when you click it.

For example, you add a `/query/assigned/` "link" item to a workboard, called "Click This To Show Tasks Assigned To Me On This Workboard", i.e. filter the current view.

This is a pretty reasonable thing to want to do. When you click it, we'd like to highlight that item to show that you've activated the "Assigned to Me" filter you added.

However, we currently highlight the thing actually serving the content, i.e. the "Workboard" item.

Instead:

  - When picking what to highlight, look through all the items for one with a link to the current request URI.
  - If we find one or more, pick the one that would be the default.
  - Otherwise, pick the first one.

This means that you can have several items like "?a=1", "?a=2", etc., and we will highlight them correctly when you click them.

This actual patch has some questionable bits (see some discussion in T13275), but I'd like to wait for stronger motivation to refactor it more extensively.

Test Plan:
  - On a portal, added a `?a=1` link. Saw it highlight properly when clikced.
  - On a workboard, added a link to the board itself with a different filter. Saw it highlight appropriately when clicked.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T12949

Differential Revision: https://secure.phabricator.com/D20353
2019-04-02 14:45:33 -07:00
epriestley
408cbd633c On portals, make the "selected" / "default" logic more straightforward
Summary:
Depends on D20349. Ref T13275. Currently, a default item is selected as a side effect of generating the full list of items, for absolutely no reason.

The logic to pick the currently selected item can also be separated out pretty easily.

(And fix a bug in with a weird edge case in projects.)

This doesn't really change anything, but it will probably make T12949 a bit easier to fix.

Test Plan: Viewed Home / projects / portals, clicked various links, got same default/selection behavior as before.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13275

Differential Revision: https://secure.phabricator.com/D20352
2019-04-02 14:44:26 -07:00
epriestley
d0d49d1efd Allow Portals to be edited, and improve empty/blank states
Summary:
Depends on D20348. Ref T13275. Portals are mostly just a "ProfileMenuEngine" menu, and that code is already relatively modular/flexible, so set that up to start with.

The stuff it gets wrong right now is mostly around empty/no-permission states, since the original use cases (project menus) didn't have any of these states: it's not possible to have a project menu with no content.

Let the engine render an "empty" state (when there are no items that can render a content page) and try to make some of the empty behavior a little more user-friendly.

This mostly makes portals work, more or less.

Test Plan: {F6322284}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13275

Differential Revision: https://secure.phabricator.com/D20349
2019-04-02 14:43:05 -07:00
epriestley
90df4b2bd1 Add skeleton for Portals, a collection of dashboards and other resources
Summary:
Ref T13275. Today, you can build a custom page on the home page, on project pages, and in your favorites menu.

PHI374 would approximately like to build a completely standalone custom page, and this generally seems like a reasonable capability which we should support, and which should be easy to support if the "custom menu" stuff is built right.

In the near future, I'm planning to shore up some of the outstanding issues with profile menus and then build charts (which will have a big dashboard/panel component), so adding Portals now should let me double up on a lot of the testing and maybe make some of it a bit easier.

Test Plan:
Viewed the list of portals, created a new portal. Everything is currently a pure skeleton with no unique behavior.

Here's a glorious portal page:

{F6321846}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam

Maniphest Tasks: T13275

Differential Revision: https://secure.phabricator.com/D20348
2019-04-02 14:42:26 -07:00
Austin McKinley
3e05ff2e99 Improve Conpherence behavior for logged out users.
Summary:
There are two issues here I was trying to fix:

* Viewing `/conpherence` by logged out users on `secure` would generate an overheated query on `ConpherenceThreadQuery` `secure` has a ton of wacky threads with bogus names.
* When a user views a specific thread that they don't have permission to see, we attempt to fetch the thread's transactions before applying policy filtering. If the thread has more than 1000 comments, that query will also overheat instead of returning a policy exception.

I fixed the first problem, but started trying to fix the second by moving the transaction fetch to `didFilterPage` but it broke in strange ways so I gave up.

Also fix a dangling `qsprintf` update.

Test Plan: Loaded threads and the Conpherence homepage with and without logged in users.

Reviewers: epriestley

Reviewed By: epriestley

Subscribers: Korvin

Differential Revision: https://secure.phabricator.com/D20375
2019-04-02 14:03:08 -07:00
epriestley
cddbe306f9 Correct a case where a single-hunk diff may incorrectly be identified as multi-hunk by the Scope engine
Summary: See PHI985. The layers above this may return `array()` to mean "one hunk with a line-1 offset". Accept either `array()` or `array(1 => ...)` to engage the scope engine.

Test Plan: See PHI985.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20363
2019-04-01 14:55:11 -07:00
epriestley
00b1c4190c Correct some straggling Ferret/Cursor interactions
Summary:
See PHI1182. Ref T13266. The recent fixes didn't quite cover the case where you have a query, but order by something other than relevance, and page forward.

Refine the tests around building/selecting these columns and paging values a little bit to be more specific about what they care about.

Test Plan:
Executed queries, then went to "Next Page", for:

  - query text, non-relevance order.
  - query text, relevance order.
  - no query text, non-relevance order.
  - no query text, relevance order.

Also, made an API call similar to the one in PHI1182.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13266

Differential Revision: https://secure.phabricator.com/D20354
2019-04-01 14:53:33 -07:00
epriestley
ea182b6df9 When we failover to a replica, log the exception we hit
Summary: See PHI1180. Currently, when we failover to a replica, we may not log the failure. Failovers are serious business and bad news, so emit a log even if we are able to connect to the replica.

Test Plan:
Configured a bogus master and a good replica:

```
$ ./bin/mail list-outbound
[2019-03-29 16:26:09] PHLOG: 'Retrying (attempt 1) after connection failure ("AphrontConnectionQueryException", #2002): Attempt to connect to root@127.0.0.2 failed with error #2002: Operation timed out.' at [/Users/epriestley/dev/core/lib/libphutil/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:124]
[2019-03-29 16:26:19] PHLOG: 'Retrying (attempt 2) after connection failure ("AphrontConnectionQueryException", #2002): Attempt to connect to root@127.0.0.2 failed with error #2002: Operation timed out.' at [/Users/epriestley/dev/core/lib/libphutil/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:124]
[2019-03-29 16:26:29] EXCEPTION: (PhutilProxyException) Failed to connect to master database ("local_config"), failing over into read-only mode. {>} (AphrontConnectionQueryException) Attempt to connect to root@127.0.0.2 failed with error #2002: Operation timed out. at [<phutil>/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:362]
<...snip backtrace...>
3945   Voided email rP04f9e72cbd10: Don't subscribe bots implicitly when they act on objects, or when they are…
3946   Voided email rPdf53d72e794c: Allow "Move Tasks to Column..." to prompt for MFA
3947   Voided email rP492b03628f19: Fix a typo in Drydock "Land" operations
3948   Voided email rPb469a5134ddd: Allow "SMTP" and "Sendmail" mailers to have "Message-ID" behavior configured in…
3949   Voided email rPa6fd8f04792d: When performing complex edits, pause sub-editors before they publish to…
...
```

Configured a bogus master and a bogus replica:

```
$ ./bin/mail list-outbound
[2019-03-29 16:26:57] PHLOG: 'Retrying (attempt 1) after connection failure ("AphrontConnectionQueryException", #2002): Attempt to connect to root@127.0.0.2 failed with error #2002: Operation timed out.' at [/Users/epriestley/dev/core/lib/libphutil/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:124]
[2019-03-29 16:27:07] PHLOG: 'Retrying (attempt 2) after connection failure ("AphrontConnectionQueryException", #2002): Attempt to connect to root@127.0.0.2 failed with error #2002: Operation timed out.' at [/Users/epriestley/dev/core/lib/libphutil/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:124]
[2019-03-29 16:27:27] PHLOG: 'Retrying (attempt 1) after connection failure ("AphrontConnectionQueryException", #2002): Attempt to connect to root@127.0.0.3 failed with error #2002: Operation timed out.' at [/Users/epriestley/dev/core/lib/libphutil/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:124]
[2019-03-29 16:27:37] PHLOG: 'Retrying (attempt 2) after connection failure ("AphrontConnectionQueryException", #2002): Attempt to connect to root@127.0.0.3 failed with error #2002: Operation timed out.' at [/Users/epriestley/dev/core/lib/libphutil/src/aphront/storage/connection/mysql/AphrontBaseMySQLDatabaseConnection.php:124]
[2019-03-29 16:27:47] EXCEPTION: (PhabricatorClusterStrandedException) Unable to establish a connection to any database host (while trying "local_config"). All masters and replicas are completely unreachable.

AphrontConnectionQueryException: Attempt to connect to root@127.0.0.2 failed with error #2002: Operation timed out. at [<phabricator>/src/infrastructure/storage/lisk/PhabricatorLiskDAO.php:177]
<...snip backtrace...>
```

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20351
2019-04-01 14:52:45 -07:00
epriestley
02f94cd7d2 Fix an issue with Duo not live-updating properly on login gates
Summary:
See <https://discourse.phabricator-community.org/t/duo-broken-in-2019-week-12/2580/>.

The "live update Duo status" endpoint currently requires full sessions, and doesn't work from the session upgrade gate on login.

Don't require a full session to check the status of an MFA challenge.

Test Plan: Went through Duo gate in a new session, got a live update.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20347
2019-03-29 11:00:38 -07:00
epriestley
c4856c37e7 Fix content overflow in user hovercards
Summary:
Fixes T13273. This element is a bit weird, but I think I fixed it without breaking anything.

The CSS is used by project hovercards and user hovercards, but they each have a class which builds mostly-shared-but-not-really-identical CSS, instead of having a single `View` class with modes. So I'm not 100% sure I didn't break something obscure, but I couldn't find anything this breaks.

The major issue is that all the text content has "position: absolute". Instead, make the image "absolute" and the text actual positioned content. Then fix all the margins/padding/spacing/layout and add overflow. Seems to work?

Plus: hide availability for disabled users, for consistency with D20342.

Test Plan:
Before:

{F6320155}

After:

{F6320156}

I think this is pixel-exact except for the overflow behavior.

Also:

  - Viewed some other user hovercards, including a disabled user. They all looked unchanged.
  - Viewed some project hovercards. They all looked good, too.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13273

Differential Revision: https://secure.phabricator.com/D20344
2019-03-28 21:10:09 -07:00
epriestley
953a449305 Hide "Availability" and "Calendar" on user profiles for disabled users
Summary:
See downstream <https://phabricator.wikimedia.org/T138723>. That suggestion is a little light on details, but I basically agree that showing "Availability: Available" on disabled user profiles is kind of questionable/misleading.

Just hide event information on disabled profiles, since this doesn't seem worth building a special "Availability: Who Knows, They Are Disabled, Good Luck" disabled state for.

Test Plan: Looked at disabled and non-disabled user profiles, saw Calendar stuff only on the former.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20342
2019-03-28 17:24:35 -07:00
epriestley
f1a7eb66da Fix a straggling issue with cursor changes impacting Conpherence thread indexing
Summary: Ref T13266. Caught one more of these "directly setting afterID" issues in the logs.

Test Plan: Ran `bin/search index --type ConpherenceThread` before and after changes. Before: fatal about a direct call. After: clean index rebuild.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13266

Differential Revision: https://secure.phabricator.com/D20341
2019-03-28 17:23:53 -07:00
epriestley
15cc475cbd When a comment was signed with MFA, require MFA to edit it
Summary:
Ref PHI1173. Currently, you can edit an MFA'd comment without redoing MFA. This is inconsistent with the intent of the MFA badge, since it means an un-MFA'd comment may have an "MFA" badge on it.

Instead, implement these rules:

  - If a comment was signed with MFA, you MUST MFA to edit it.
  - When removing a comment, add an extra MFA prompt if the user has MFA. This one isn't strictly required, this action is just very hard to undo and seems reasonable to MFA.

Test Plan:
  - Made normal comments and MFA comments.
  - Edited normal comments and MFA comments (got prompted).
  - Removed normal comments and MFA comments (prompted in both cases).
  - Tried to edit an MFA comment without MFA on my account, got a hard "MFA absolutely required" failure.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20340
2019-03-28 15:55:14 -07:00
epriestley
e69b349b1b Prevent users from removing task titles with "Bulk Edit"
Summary:
See downstream <https://phabricator.wikimedia.org/T209449>.

The "Bulk Edit" flow works with `setContinueOnMissingFields(true)`, so `newRequiredError()` errors are ignored. This allows you to apply a transaction which changes the title to `""` (the empty string) without actually hitting any errors which the workflow respects.

(Normally, `setContinueOnMissingFields(...)` workflows only edit properties that can't be missing, like the status of an object, so this is an unusual flow.)

Instead, validate more narrowly:

  - Transactions which would remove the title get an "invalid" error, which is respected even under "setContinueOnMissingFields()".
  - Then, we try to raise a "missing/required" error if everything otherwise looks okay.

Test Plan:
  - Edited a task title normally.
  - Edited a task to remove the title (got an error).
  - Created a task with no title (disallowed: got an error).
  - Bulk edited a task to remove its title.
    - Before change: allowed.
    - After change: disallowed.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20339
2019-03-28 09:06:56 -07:00
epriestley
6bb9d3ac67 Allow users to add "ProfileMenu" items on mobile
Summary:
Depends on D20337. Fixes T12167. Ref T13272. On this page ("Favorites > Edit Favorites > Personal", for example) the curtain actions aren't available on mobile.

Normally, curtains are built with `Controller->newCurtainView()`, which sets an ID on the action list, which populates the header button. This curtain is built directly because there's no `Controller` handy.

To fix the issue, just set an ID. This could probably be cleaner, but that's likely a much more involved change.

Test Plan: Edited my favorites, narrowed the window, saw an "Actions" button.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272, T12167

Differential Revision: https://secure.phabricator.com/D20338
2019-03-27 16:05:55 -07:00
epriestley
6648942bc8 Don't allow "Conpherence" menu items to be added to editable menus if Conpherence is not installed
Summary: Depends on D20336. Ref T13272. Fixes T12745. If you uninstall Conpherence, "Edit Favorites" and other editable menu interfaces still allow you to add "Conpherence" items. Prevent this.

Test Plan:
  - Installed Conpherence: Saw option to add a "Conpherence" link when editing favorites menu.
  - Uninstalled Conpherence: No more option.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272, T12745

Differential Revision: https://secure.phabricator.com/D20337
2019-03-27 16:01:16 -07:00
epriestley
73feac47c7 When query panels have more results, show a "View All Results" button at the bottom
Summary:
Depends on D20335. Ref T13263. Ref T13272. See PHI854. Ref T9903.

Currently, we don't provide a clear indicator that a query panel is showing a partial result set (UI looks the same whether there are more results or not).

We also don't provide any way to get to the full result set (regardless of whether it is the same as the visible set or not) on tab panels, since they don't inherit the header buttons.

To (mostly) fix these problems, add a "View All Results" button at the bottom of the list if the panel shows only a subset of results.

Test Plan:
{F6314560}

{F6314562}

{F6314564}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272, T13263, T9903

Differential Revision: https://secure.phabricator.com/D20336
2019-03-27 15:55:48 -07:00
epriestley
2c184bd4cd When query panels overheat, degrade them and show a warning
Summary:
Depends on D20334. Ref T13272. After recent changes to make overheating queries throw by default, dashboard panels now fail into an error state when they overheat.

This is a big step up from the hard-coded homepage panels removed by D20333, but can be improved. Let these panels render partial results when they overheat and show a human-readable warning.

Test Plan: {F6314114}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20335
2019-03-27 15:54:28 -07:00
epriestley
6b069f26c0 Give Dashboard query panels a more obvious "View All" button
Summary:
Depends on D20333. Ref T13272. Currently, dashboard query panels have an aesthetic but hard-to-see icon to view results, with no text label.

Instead, provide an easier-to-see button with a text label.

Test Plan: {F6314091}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20334
2019-03-27 15:53:51 -07:00
epriestley
a68b6cfe65 Use real Dashboard Panels to render the default hard-coded homepage, not hacky fake panels
Summary:
Ref T13272. Currently, the hard-coded default homepage looks like a dashboard but is actually rendered completely manually.

This means that various panel rendering improvements we'd like to make (including better "Show More" behavior and better handling of overheated queries) won't work on the home page naturally: we'd have to make these changes twice, once for dashboards and once for the home page.

Instead, build the home page out of real panels. This turns out to be significantly simpler (I think the backend part of panels/dashboards is mostly on solid footing, the frontend just needs some work).

Test Plan:
Loaded the default home page, saw a thing which looked the same as the old thing. Changes I know about / expect:

  - The headers for these panels are no longer linked, but they weren't colorized before so the links were hard to find. I plan to improve panel behavior for "find/more" in a followup.
  - I've removed the "follow us on twitter" default NUX if feed is empty, since this seems like unnecessary incidental complexity.
  - (Internal exception behavior should be better, now.)

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13272

Differential Revision: https://secure.phabricator.com/D20333
2019-03-27 15:21:36 -07:00
epriestley
ee54e71ba9 On workboards, link ancestor project breadcrumbs to their workboards
Summary:
Ref T13269. Currently, if you're on a milestone workboard like this:

> Projects > Parent > Milestone > Workboard

The "Parent" link goes to the parent profile. More often, I want it to go to the parent workboard. Try doing that? This is kind of one-off but I suspect it's a better rule.

Also, consolidate one billion manual constructions of "/board/" URIs.

Test Plan: Viewed a milestone workboard, clicked the parent link, ended up on the parent workboard.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13269

Differential Revision: https://secure.phabricator.com/D20331
2019-03-27 14:42:57 -07:00
epriestley
4485482fd4 Fix task hovercards showing a "Not Editable" state
Summary:
Ref T13269. These cards really have three states:

  - Editable: shows a pencil icon edit button.
  - You Do Not Have Permission To Edit This: shows a "no editing" icon in red.
  - Hovecard: shouldn't show anything.

However, the "hovercard" and "no permission" states are currently the same state, so when I made the "no permission" state more obvious that made the hovercard go all weird.

Make these states explicitly separate states.

Test Plan:
Looked at a...

  - Editable card on workboard: edit state.
  - No permission card on workboard: no permission state.
  - Any hovercard: "not editable, this is a hovercard" state.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13269

Differential Revision: https://secure.phabricator.com/D20330
2019-03-26 15:56:09 -07:00
epriestley
b328af0a1b Raise a more tailored exception if transform/thumbnail support is missing for cover images
Summary: If "GD" doesn't support a particular image type, applying a cover image currently goes through but no-ops. Fail it earlier in the process with a more specific error.

Test Plan: Without PNG support locally, dropped a PNG onto a card on a workboard. Got a more useful error.

Reviewers: amckinley

Reviewed By: amckinley

Differential Revision: https://secure.phabricator.com/D20328
2019-03-26 15:16:31 -07:00
Austin McKinley
d347b102a1 Add workboard trigger rule for changing task priority
Summary: This is a copy/paste/find-and-replace-all of the status rule added by D20288.

Test Plan: Made some triggers, moved some tasks, edited some triggers. Grepped for the word "status" in the new file.

Reviewers: epriestley

Reviewed By: epriestley

Subscribers: Korvin

Differential Revision: https://secure.phabricator.com/D20325
2019-03-26 11:39:49 -07:00
epriestley
71c89bd057 Pass all adjacent card PHIDs from the client to the server when moving a card
Summary:
Depends on D20321. Fixes T12175. Ref T13074. Now that before/after PHIDs are suggestions, we can give the server a more complete view of what the client is trying to do so we're more likely to get a good outcome if the client view is out of date.

Instead of passing only the one directly adjacent card PHID, pass all the card PHIDs that the client thinks are in the same group.

(For gigantic columns with tens of thousands of tasks this might need some tweaking -- like, slice both lists down to 10 items -- but we can cross that bridge when we come to it.)

Test Plan:
  - Dragged some cards around to top/bottom/middle positions, saw good positioning in all cases.
  - In two windows, dragged stuff around on the same board. At least at first glance, conflicting simultaneous edits seemed to do reasonable things.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13074, T12175

Differential Revision: https://secure.phabricator.com/D20322
2019-03-26 07:46:05 -07:00
epriestley
6138e50962 When moving cards on workboards, treat before/after cards as optional hints, not strict requirements
Summary:
Depends on D20320. Ref T12175. Ref T13074. Currently, when you move a card between columns, the internal transaction takes exactly one `afterPHID` or `beforePHID` and moves the card before or after the specified card.

This is a fairly strict interpretation and causes a number of practical issues, mostly because the user/client view of the board may be out of date and the card they're dragging before or after may no longer exist: another user might have moved or hidden it between the last client update and the current time.

In T13074, we also run into a more subtle issue where a card that incorrectly appears in multiple columns fatals when dropped before or after itself.

In all cases, a better behavior is just to complete the move and accept that the position may not end up exactly like the user specified. We could prompt the user instead:

> You tried to drop this card after card X, but that card has moved since you last loaded the board. Reload the board and try again.

...but this is pretty hostile and probably rarely/never what the user wants.

Instead, accept a list of before/after PHIDs and just try them until we find one that works, or accept a default position if none work. In essentially all cases, this means that the move "just works" like users expect it to instead of fataling in a confusing/disruptive/undesirable (but "technically correct") way.

(A followup will make the client JS send more beforePHIDs/afterPHIDs so this works more often.)

We could eventually add a "strict" mode in the API or something if there's some bot/API use case for precise behavior here, but I suspect none exist today or are (ever?) likely to exist in the future.

Test Plan:
  - (T13074) Inserted two conflicting rows to put a card on two columns on the same board. Dropped one version of it underneath the other version. Before: confusing fatal. After: cards merge sensibly into one consistent card.
  - (T12175) Opened two views of a board. Moved card A to a different column on the first view. On the second view, dropped card B under card A (still showing in the old column). Before: confusing fatal. After: card ended up in the right column in approximately the right place, very reasonably.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13074, T12175

Differential Revision: https://secure.phabricator.com/D20321
2019-03-26 07:45:24 -07:00
epriestley
6182193cf5 Give the "Code" tab in Diffusion more consistent (path-retaining) behavior
Summary:
Fixes T13270. In Diffusion, the "Code" tab is linked in a weird way that isn't consistent with the other tabs.

Particularly, if you navigate to `x/y/z/` and toggle between the "Branches" and "History" tabs (or other tabs), you keep your path. If you click "Code", you lose your path.

Instead, retain the path, so you can navigate somewhere and then toggle to/from the "Code" tab to get different views of the same path.

Test Plan: Browed into a repository, clicked "History", clicked "Code", ended up back in the place I started.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T13270

Differential Revision: https://secure.phabricator.com/D20323
2019-03-25 14:45:02 -07:00
epriestley
c53ed72e4c Provide a clearer UI for "view all results" in partial result panels
Summary:
In some cases, we show a limited number of one type of object somewhere else, like "Recent Such-And-Such" or "Herald Rules Which Use This" or whatever.

We don't do a very good job of communicating that these are partial lists, or how to see all the results. Usually there's a button in the upper right, which is fine, but this could be better.

Add an explicit "more stuff" button that shows up where a pager would appear and makes it clear that (a) the list is partial; and (b) you can click the button to see everything.

Test Plan: {F6302793}

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam

Differential Revision: https://secure.phabricator.com/D20315
2019-03-25 14:35:08 -07:00
epriestley
47856dc93f Track how many columns use a particular trigger
Summary:
Ref T5474. In 99% of cases, a separate "archived/active" status for triggers probably doesn't make much sense: there's not much reason to ever disable/archive a trigger explcitly, and the archival rule is really just "is this trigger used by anything?".

(The one reason I can think of to disable a trigger manually is because you want to put something in a column and skip trigger rules, but you can already do this from the task detail page anyway, and disabling the trigger globally is a bad way to accomplish this if it's in use by other columns.)

Instead of adding a separate "status", just track how many columns a trigger is used by and consider it "inactive" if it is not used by any active columns.

Test Plan: This is slightly hard to test exhaustively since you can't share a trigger across multiple columns right now, but: rebuild indexes, poked around the trigger list and trigger details, added/removed triggers.

Reviewers: amckinley

Reviewed By: amckinley

Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam

Maniphest Tasks: T5474

Differential Revision: https://secure.phabricator.com/D20308
2019-03-25 14:04:55 -07:00
epriestley
bfa5ffe8a1 Add a "Play Sound" workboard trigger rule
Summary:
Ref T5474. Allow columns to play a sound when tasks are dropped.

This is a little tricky because Safari has changed somewhat recently to require some gymnastics to play sounds when the user didn't explicitly click something. Preloading the sound on the first mouse interaction, then playing and immediately pausing it seems to work, though.

Test Plan: Added a trigger with 5 sounds. In Safari, Chrome, and Firefox, dropped a card into the column. In all browsers, heard a nice sequence of 5 sounds played one after the other.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T5474

Differential Revision: https://secure.phabricator.com/D20306
2019-03-25 14:03:57 -07:00
epriestley
1277db9452 When users hover over a column trigger menu, show a "preview" with the rules instead of a tooltip
Summary:
Ref T5474. The first rough cut of triggers showed some of the trigger rules in a tooltip when you hover over the "add/remove" trigger menu.

This isn't great since we don't have much room and it's a bit finnicky / hard to read.

Since we have a better way to show effects now in the drop preview, just use that instead. When you hover over the trigger menu, preview the trigger in the "drop effect" element, with a "Trigger: such-and-such" header.

Test Plan:
  - This is pretty tough to screenshot.
  - Hovered over menu, got a sensible preview of the trigger effects.
  - Dragged a card over the menu, no preview.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T5474

Differential Revision: https://secure.phabricator.com/D20304
2019-03-25 14:02:10 -07:00
epriestley
614f39b806 Show a trigger rule summary on the rule view page
Summary: Ref T5474. When you view the main page for a rule, show what the rule does before you actually edit it.

Test Plan:
Viewed a real trigger, then faked invalid/unknown rules:

{F6300211}

{F6300212}

{F6300213}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T5474

Differential Revision: https://secure.phabricator.com/D20303
2019-03-25 13:29:12 -07:00
epriestley
ff128e1b32 Write workboard trigger rules to the database
Summary: Ref T5474. Read and write trigger rules so users can actually edit them.

Test Plan: Added, modified, and removed trigger rules. Saved changes, used "Show Details" to review edits.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T5474

Differential Revision: https://secure.phabricator.com/D20302
2019-03-25 13:26:21 -07:00
epriestley
567dea5449 Mostly make the editor UI for triggers work
Summary:
Ref T5474. This provides a Herald-like UI for editing workboard trigger rules.

This probably has some missing pieces and doesn't actually save anything to the database yet, but the basics at least roughly work.

Test Plan: {F6299886}

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T5474

Differential Revision: https://secure.phabricator.com/D20301
2019-03-25 13:25:14 -07:00
epriestley
a5b3e33e3c Don't show workboard action previews if the action won't have any effect
Summary:
Ref T10335. When you (for example) drag a "Resolved" task into a column with "Trigger: change status to resolved.", don't show a hint that the action will "Change status to resolved." since this isn't helpful and is somewhat confusing.

For now, the only visibility operator is "!=" since all current actions are simple field comparisons, but some actions in the future (like "add subscriber" or "remove project") might need other conditions.

Test Plan:
Dragged cards in ways that previously provided useless hints: move from column A to column B on a "Group by Priority" board; drag a resolved task to a "Trigger: change status to as resolved" column. Saw a more accurate preview in both cases.

Drags which actually cause effects still show the effects correctly.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T10335

Differential Revision: https://secure.phabricator.com/D20300
2019-03-25 13:24:01 -07:00
epriestley
5dca1569b5 Preview the effects of a drag-and-drop operation on workboards
Summary:
Ref T10335. Ref T5474. When you drag-and-drop a card on a workboard, show a UI hint which lists all the things that the operation will do.

This shows: column moves; changes because of dragging a card to a different header; and changes which will be caused by triggers.

Not implemented here:

  - Actions are currently shown even if they have no effect. For example, if you drag a "Normal" task to a different column, it says "Change priority to Normal.". I plan to hide actions which have no effect, but figuring this out is a little bit tricky.
  - I'd like to make "trigger effects" vs "non-trigger effects" a little more clear in the future, probably.

Test Plan:
Dragged stuff between columns and headers, and into columns with triggers. Got appropriate preview text hints previewing what the action would do in the UI.

(This is tricky to take a screenshot of since it only shows up while the mouse cursor is down.)

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T10335, T5474

Differential Revision: https://secure.phabricator.com/D20299
2019-03-25 13:22:56 -07:00
epriestley
149f8cc959 Hard code a "close task" action on every column Trigger
Summary: Depends on D20287. Ref T5474. This hard-codes a storage value for every trigger, with a "Change status to <default closed status>" rule and two bogus rules. Rules may now apply transactions when cards are dropped.

Test Plan: Dragged cards to a column with a trigger, saw them close.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T5474

Differential Revision: https://secure.phabricator.com/D20288
2019-03-25 13:21:55 -07:00
epriestley
916bf1a8f9 Allow triggers to be attached to and removed from workboard columns
Summary:
Depends on D20286. Ref T5474. Attaches triggers to columns and makes "Remove Trigger" work.

(There's no "pick an existing named trigger from a list" UI yet, but I plan to add that at some point.)

Test Plan: Attached and removed triggers, saw column UI update appropriately.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T5474

Differential Revision: https://secure.phabricator.com/D20287
2019-03-25 13:21:26 -07:00
epriestley
0204489a52 Modularize workboard column transactions
Summary: Depends on D20279. Ref T5474. Modernize these transactions before I add a new "TriggerTransaction" for setting triggers.

Test Plan: Created a column. Edited a column name and point limit. Hid and un-hid a column. Grepped for removed symbols.

Reviewers: amckinley

Reviewed By: amckinley

Maniphest Tasks: T5474

Differential Revision: https://secure.phabricator.com/D20286
2019-03-25 13:14:25 -07:00