Summary: Ref T13189. See PHI690. When a lease is first acquired or activated, note the time. This supports better visibility into queue lengths. For now, this is only queryable via DB and visible in the UI, but can be more broadly exposed in the future.
Test Plan: Landed a revision, saw the leases get sensible timestamps for acquisition/activation.
Reviewers: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19613
Summary: Ref T13189. Summaries do not appear to be meaningfully rendered with Remarkup so just drop the engine. See D19610 for the previous change in this vein.
Test Plan: Viewed config list with option summaries.
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19612
Summary:
Depends on D19609. Ref T13189. At some point, we switched from RemarkupEngine to RemarkupView and lost this piece of hack-magic.
Restore the hack-magic. It's still hack-magic instead of a real rule, but things are at least cleaner than they were before.
Test Plan: Viewed `auth.require-approval`, etc. Saw references to other config options linked properly.
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19610
Summary: Ref T13189. When there are no setup issues, we currently double-render a weird setup issues box underneath the notice. Get rid of it.
Test Plan: Viewed page with and without setup issues, saw less awkward UI.
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19609
Summary:
Depends on D19607. Ref T13189. See PHI642. Ref T13186.
Some transactions can sometimes be applied to objects you can not edit. Currently, using `*.edit` to edit an object always explicitly requires CAN_EDIT.
Now that individual transactions require CAN_EDIT by default and can reduce or replace this requirement, stop requiring CAN_EDIT to reach the editor.
The only expected effect of this change is that low-permission edits (like disabling a user, leaving a project, or leaving a thread) can now work via `*.edit`.
Test Plan:
- Tried to perform a normal edit (changing a task title) against an object with no CAN_EDIT. Still got a permissions error.
- As a non-admin, disabled other users while holding the "Can Disable Users" permission.
- As a non-admin, got a permissions error while trying to disable other users while not holding the "Can Disable Users" permission.
Reviewers: amckinley
Maniphest Tasks: T13189, T13186
Differential Revision: https://secure.phabricator.com/D19608
Summary:
Depends on D19606. Ref T13189. See PHI642.
- Disabling/enabling users no longer requires admin. Now, you just need "Can Disable Users".
- Update the UI to appropriately show the action in black or grey depending on what clicking the button will do.
- For "Approve/Disapprove", fix a couple bugs, then let them go through without respect for "Can Disable Users". This is conceptually a different action, even though it ultimately sets the "Disabled" flag.
Test Plan:
- Disabled/enabled users from the web UI as various users, including a non-administrator with "Can Disable Users".
- Hit permissions errors from the web UI as various users, including an administrator without "Can Disable Users".
- Saw the "Disable/Enable" action activate properly based on whether clicking the button would actually work.
- Disapproved a user without "Can Disable Users" permission, tried to re-disapprove a user.
- Approved a user, tried to reapprove a user.
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19607
Summary:
Depends on D19605. Ref T13189. See PHI642. This adds a separate "Can Disable Users" capability, and makes the underlying transaction use it.
This doesn't actually let you weaken the permission, since all pathways need more permissions:
- `user.edit` needs CAN_EDIT.
- `user.disable/enable` need admin.
- Web UI workflow needs admin.
Upcoming changes will update these pathways.
Without additional changes, this does let you //strengthen// the permission.
This also fixes the inability to disable non-bot users via the web UI.
Test Plan:
- Set permission to "No One", tried to disable users. Got a tailored policy error.
- Set permission to "All Users", disabled/enabled a non-bot user.
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19606
Summary:
Depends on D19604. Ref T13189. See PHI642. Deprecates these in favor of "user.edit", redefines them in terms of it, and removes the old `disableUser()` method.
I kept the "is admin" permissions check for consistency, since these methods have always said "(admin only)". This check may not be the most tailored check soon, but we can just keep executing it in addition to the real check.
For now, this change stops this method from actually disabling non-bot users (since it implicitly adds a CAN_EDIT requirement, and even administrators don't have that). An upcoming change will fix that.
Test Plan: Enabled and disabled a (bot) user via these methods. Checked API UI, saw them marked as "disabled".
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19605
Summary:
Ref T13189. See PHI642. Upgrades the "Disable" action in the web UI to be transaction-based.
This technically breaks things a little (you can't disable non-bot users, since they now require CAN_EDIT and you won't have it) but an upcoming change will fix the permissions issue.
Test Plan: Disabled and enabled a (bot) user from the web UI.
Reviewers: amckinley
Maniphest Tasks: T13189
Differential Revision: https://secure.phabricator.com/D19604
Summary:
Depends on D19585. Ref T13164.
Almost all transactions require CAN_EDIT on the object, but they generally do not enforce this directly today. Instead, this is effectively enforced by Controllers, API methods, and EditEngine doing a `CAN_EDIT` check when loading the object to be edited.
A small number of transactions do not require CAN_EDIT, and instead require only a weaker/lesser permission. These are:
- Joining a project which you have CAN_JOIN on.
- Leaving a project which isn't locked.
- Joining a Conpherence thread you can see (today, no separate CAN_JOIN permission for Conpherence).
- Leaving a Conpherence thread.
- Unsubscribing.
- Using the special `!history` command from email.
Additionally, these require CAN_INTERACT, which is weaker than CAN_EDIT:
- Adding comments.
- Subscribing.
- Awarding tokens.
Soon, I want to add "disabling users" to this list, so that you can disable users if you have "Can Disable User" permission, even if you can not otherwise edit users.
It's possible this list isn't exhaustive, so this change might break something by adding a policy check to a place where we previously didn't have one. If so, we can go weaken that policy check to the appropriate level.
Enforcement of these special cases is currently weird:
- We mostly don't actually enforce CAN_EDIT in the Editor; instead, it's enforced before you get to the editor (in EditEngine/Controllers).
- To apply a weaker requirement (like leaving comments or leaving a project), we let you get through the Controller without CAN_EDIT, then apply the weaker policy check in the Editor.
- Some transactions apply a confusing/redundant explicit CAN_EDIT policy check. These mostly got cleaned up in previous changes.
Instead, the new world order is:
- Every transaction has capability/policy requirements.
- The default is CAN_EDIT, but transactions can weaken this explicitly they want.
- So now we'll get requirements right in the Editor, even if Controllers or API endpoints make a mistake.
- And you don't have to copy/paste a bunch of code to say "yes, every transaction should require CAN_EDIT".
Test Plan:
- Tried to add members to a Conpherence thread I could not edit (permissions error).
- Left a Conpherence thread I could not edit (worked properly).
- Joined a thread I could see but could not edit (worked properly).
- Tried to join a thread I could not see (permissions error).
- Implemented `requireCapabilites()` on ManiphestTransactionEditor and tried to edit a task (upgrade guidance error).
- Mentioned an object I can not edit on another object (works).
- Mentioned another object on an object I can not edit (works).
- Added a `{F...}` reference to an object I can not edit (works).
- Awarded tokens to an object I can not edit (works).
- Subscribed/unsubscribed from an object I can not edit (works).
- Muted/unmuted an object I can not edit (works).
- Tried to do other types of edits to an object I can not edit (correctly results in a permissions error).
- Joined and left a project I can not edit (works).
- Tried to edit and add members to a project I can not edit (permissions error).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19586
Summary:
Ref T13187. See PHI811. If the file tree is enabled and visible, set the default tab to "History".
- This is a bit magic.
- It won't work entirely on mobile (we can't tell that you're on mobile on the server, so we'll pick the "History" tab even though the file tree isn't actually visible on your device).
- There's no corresponding logic in Diffusion. Diffusion doesn't have the same tab layout, but this makes things somewhat inconsistent.
So I don't love this, but we can try it and see if it's confusing or helpful on the balance.
Test Plan: With filetree on and off, reloaded revisions. Saw appropriate tab selected by default.
Reviewers: amckinley
Maniphest Tasks: T13187
Differential Revision: https://secure.phabricator.com/D19601
Summary: Ref T13187. Ref T13176. With drafts, we actually want to suppress this link on "first broadcast" (the first time we send mail), not on "new object" (when the revision is created as a draft).
Test Plan: Poked at this locally, will keep an eye on it in production.
Reviewers: amckinley
Maniphest Tasks: T13187, T13176
Differential Revision: https://secure.phabricator.com/D19598
Summary: Ref T13187. See PHI807. The documentation currently does not make it very clear that this is a local setting, per `phd` process. Make it more clear.
Test Plan: {F5827757}
Reviewers: amckinley
Maniphest Tasks: T13187
Differential Revision: https://secure.phabricator.com/D19597
Summary:
Ref T13187. See PHI834. Mercurial has somewhat-recently (changeset is from Jan 2018) introduced a new "protocaps" command, that appears in Mercurial 4.7 and possibly before then.
We must explicitly enumerate all protocol commands because you can't decode the protocol without knowing how many arguments the command expects, so enumerate it.
(Also fix an issue where the related error message had an extra apostrophe.)
Test Plan:
- Ran `hg clone ...` with client and server on Mercurial 4.7.
- Before: fatal on unknown "protocaps" command.
- Midway: better typography in error message.
- After: clean clone.
Reviewers: amckinley
Maniphest Tasks: T13187
Differential Revision: https://secure.phabricator.com/D19596
Summary:
Depends on D19594. See PHI823. Ref T13164.
- Add a label for the "X" button in comment areas, like "Remove Action: Change Subscribers".
- Add a label for the floating header display options menu in Differential.
- Add `role="button"` to `PHUIButtonView` objects that we render with an `<a ...>` tag.
Test Plan:
Viewed a revision with `?__aural__=true`:
- Saw "Remove Action: ..." label.
- Saw "Display Options" label.
- Used inspector to verify that some `<a class="button" ...>` now have `<a class="button" role="button" ...>`. This isn't exhaustive, but at least improves things. A specific example is the "edit", "reply", etc., actions on inline comments.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19595
Summary: Ref T12164. Updates another controller to use identities.
Test Plan:
Pretty ad-hoc, but loaded the main pages of several different repos with and without repo identities. I'm not totally convinced the `author` from this data structure is actually being used:
```
$return = array(
'commit' => $modified,
'date' => $date,
'author' => $author,
'details' => $details,
);
```
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19580
Summary:
Ref T13164. See PHI823. (See that issue for some more details and discussion.)
Add aural labels to various buttons which were missing reasonable aural labels.
The "Search" button (magnifying glass in the global search input) had an entire menu thing inside it. I moved that one level up and it doesn't look like it broke anything (?). All the other changes are pretty straightforward.
Test Plan:
{F5806497}
{F5806498}
- Will follow up on the issue to make sure things are in better shape for the reporting user.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19594
Summary:
Depends on D19585. Ref T13164. This is a precursor for D19586, which causes Editors to start doing more explicit CAN_EDIT checks.
Passwords have an Editor, but don't actually define a CAN_EDIT capability. Define one (you can edit a password if you can edit the object the password is associated with).
(Today, this object is always a User -- this table just unified VCS passwords and Account passwords so they can be handled more consistently.)
Test Plan:
- With D19586, ran unit tests and got a pass.
- Edited my own password.
- Tried to edit another user's password and wasn't permitted to.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19592
Summary: Depends on D19584. Ref T13164. This check is an //extra// check: you need EDIT //and// this capability. Thus, we can do it in validation without issues.
Test Plan:
- This code isn't reachable today: all methods of applying this transaction do a separate check for "Can Lock" upfront.
- Commented out the "Can Lock" check in the LockController, tried to lock as a user without permission. Was rejected with a policy exception.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19585
Summary:
Depends on D19583. Ref T13164. This continues the work of getting rid of `requireCapabilities()`.
This check is valid, but can be a `validateTransactions()` check instead. This is generally more consistent with how other applications work (e.g., creating subprojects).
The UI for this isn't terribly great: you get a policy error //after// you try to create the object. But that's how it worked before, so this isn't any worse than it was. The actual policy exception is (very) slightly more clear now (raised against the right object).
Test Plan:
- Created a child as a user with permission to do so to make sure I didn't break that.
- Set edit permission on `a/` to just me, tried to create `a/b/` as another user, got a policy exception since they can't edit the parent.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19584
Summary: Depends on D19582. Ref T13164. It's not possible to reach the editor without passing through a CAN_EDIT check, and it shouldn't be necessarily to manually specify that edits require CAN_EDIT by default.
Test Plan: Grepped for `RepositoryEditor`, verified that all callsites pass through a CAN_EDIT check.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19583
Summary:
Depends on D19581. Ref T13164. This method has no effect:
- You must always have CAN_EDIT to reach an Editor in the first place.
- Per previous change, I'm going to restructure this so transactions explicitly check CAN_EDIT by default anyway.
Test Plan: Tried to edit and hide a project column as a user without permission, hit global permission checks long before reaching this method.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19582
Summary:
Depends on D19579. Fixes T10003. These have been deprecated with a setup warning about their impending removal for about two and a half years.
Ref T13164. See PHI642. My overall goal here is to simplify how we handle transactions which have special policy behaviors. In particular, I'm hoping to replace `ApplicationTransactionEditor->requireCapabilities()` with a new, more clear policy check.
A problem with `requireCapabilities()` is that it doesn't actually enforce any policies in almost all cases: the default is "nothing", not CAN_EDIT. So it ends up looking like it's the right place to specialize policy checks, but it usually isn't.
For "Disable", I need to be able to weaken the check selectively (you can disable users if you have the permission, even if you can't edit them otherwise). We have a handful of other edits which work like this (notably, leaving and joining projects) but they're very rare.
Test Plan: Grepped for all removed classes. Edited a Maniphest task.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164, T10003
Differential Revision: https://secure.phabricator.com/D19581
Summary:
Depends on D19577. Ref T13164. See PHI642. This adds modern transaction-oriented enable/disable support.
Currently, this also doesn't let you disable normal users even when you're an administrator. I'll refine the policy model later in this change series, since that's also the goal here (let users set "Can Disable Users" to some more broad set of users than "Administrators").
This also leaves us with two different edit pathways: the old UserEditor one and the new UserTransactionEditor one. The next couple diffs will redefine the other pathways in terms of this pathway.
Test Plan:
- Enabled/disabled a bot.
- Tried to disable another non-bot user. This isn't allowed yet, since even as an administrator you don't have CAN_EDIT on them and currently need it: right now, there's no way for a particular set of transactions to say they can move forward with reduced permissions.
- Tried to enable/disable myself. This isn't allowed since you can't enable/disable yourself.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19579
Summary:
Depends on D19576. Ref T13164. See PHI642. This adds an EditEngine for users and a `user.edit` modern API method.
For now, all it supports is editing real name, blurb, title, and icon (same as "Edit Profile" from the UI).
Test Plan:
- Edited my stuff via the new API method.
- Tried to edit another user, got rejected by policies.
- Tried to create a user, got rejected by policies.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19577
Summary:
Ref T13164. See PHI642. I'd like to provide a third-generation `user.edit` API endpoint and make `user.enable` and `user.disable` obsolete before meddling with policy details, even if it isn't full-fledged yet.
Users do already have a transactions table and a Transaction-based editor, but it's only used for editing title, real name, etc. All of these are custom fields, so their support comes in automatically through CustomField extension code.
Realign it for modular transactions so new code will be fully modern. There are no actual standalone transaction types yet so this diff is pretty thin.
Test Plan:
- Grepped for `UserProfileEditor`.
- Edited a user's title/real name/icon.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19576
Summary: Depends on D19491.
Test Plan: Viewed some commits where the identity was mapped to a user and another that wasn't; saw the header render either a link to the user or the identity object.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19492
Summary:
Ref T13164. See PHI788. The issue requests a "created" timestamp.
Also add filtering for repository, state, and author.
Test Plan:
Used all filters.
{F5795085}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19574
Summary:
Fixes T13184. In Almanac, interfaces are always added to devices. However, if you "Add New Interface" and then "Cancel", you go to the nonexistent `/interface/` page.
Instead, return to the device page.
Test Plan: From a device page, clicked "Add Interface" and then "Cancel". Ended up back where I was.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13184
Differential Revision: https://secure.phabricator.com/D19573
Summary:
Ref T13164. See PHI785. See D19546. I think I didn't test the updated error messaging here entirely properly, since I have some tasks in queue which error out here ("Missing argument 1 to newMailers(...)").
This is an error condition already, but we want to get through this call so we can raise a tailored message.
Test Plan: Tasks which errored out here now succeed. This condition is only reachable if you misconfigure things in the first place.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19572
Summary:
Ref T13164. See PHI693. In Differential, you can {nav View Options > View Standalone} to get a standalone view of a single changeset. You can also arrive here via the big changeset list for revisions affecting a huge number of files.
We currently suggest that all the keyboard shortcuts work, but some do not. In particular, the "Next File" and "Previous File" keyboard shortcuts (and some similar shortcuts) do not work. In the main view, the next/previous files are on the same page. In the standalone view, we'd need to actually change the URI.
Ideally, we should do this (and, e.g., put prev/next links on the page). As a first step toward that, hide the nonfunctional shortcuts to stop users from being misled.
Test Plan:
- Viewed a revision in normal and standalone views.
- No changes in normal view, and all keys still work ("N", "P", etc).
- In standalone view, "?" no longer shows nonfunctional key commands.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19571
Summary: Ref T12164. Defines a new manual activity that suggests rebuilding repository identities before Phabricator begins to rely on them.
Test Plan:
- Ran migration, observed expected setup issue: {F5788217}
- Ran `bin/config done identities` and observed setup issue get marked as done.
- Ran `/bin/storage upgrade --apply phabricator:20170912.ferret.01.activity.php` to make sure I didn't break the reindex migration; observed reindex setup issue appear as expected.
- Ran `./bin/config done reindex` and observed reindex issue cleared as expected.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19497
Summary:
Fixes T12397. Ref T13164. See PHI801.
Several installs have hit various use cases where the path on disk where Phabricator lives changes at runtime. Currently, `bin/ssh-auth` caches a flat file which includes the path to `bin/ssh-exec`, so this may fall out of date if `phabricator/` moves.
These use cases have varying strengths of legitimacy, but "we're migrating to a new set of hosts and the pool is half old machines and half new machines" seems reasonably compelling and not a problem entirely of one's own making.
Test Plan:
- Compared output on `master` to output after change, found them byte-for-byte identical.
- Moved `phabricator/` to `phabricator2/`, ran `bin/ssh-auth`, got updated output.
- Added a new SSH key, saw it appear in the output.
- Grepped for `AUTHFILE_CACHEKEY` (no hits).
- Dropped the cache, verified that the file regenerates cleanly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164, T12397
Differential Revision: https://secure.phabricator.com/D19568
Summary:
Ref T13164. See PHI790. Older versions of APCu reported cache keys as "key" from `apcu_cache_info()`. APC and newer APCu report it as "info".
Check both indexes for compatibility.
Test Plan:
- Locally, with newer APCu, saw no behavioral change.
- Will double check on `admin`, which has an older APCu with the "key" behavior.
- (I hunted this down by dumping `apcu_cache_info()` on `admin` to see what was going on.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19569
Summary:
Ref T13164. In PHI801, an install reported a particular slow Conduit method call.
Conduit calls aren't easily profilable with normal tools (for example, `arc call-conduit --xprofile ...` gives you a profile of the //client//). They can be profiled most easily with `bin/conduit call ... --xprofile`.
However, `bin/conduit call` currently doesn't let you pick a user to execute the command on behalf of, so it's not terribly useful for profiling `*.edit`-style methods which do a write: these need a real acting user.
Test Plan:
Ran `bin/conduit call --method user.whoami --as epriestley ...` with valid, invalid, and no acting users.
```
$ echo '{}' | ./bin/conduit call --method user.whoami --as epriestley --input -
Reading input from stdin...
{
"result": {
"phid": "PHID-USER-icyixzkx3f4ttv67avbn",
"userName": "epriestley",
"realName": "Evan Priestley",
...
```
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19566
Summary:
Ref T13164. PHI805 incidentally includes some `bin/storage probe` output for 100GB+ tables which renders wrong.
We have the tools to render it properly, so stop doing this manually and let ConsoleTable figure out the alignment.
Test Plan:
Faked very large table sizes, ran `bin/storage probe`:
{F5785946}
(Then, un-faked the very large table sizes and ran it again, got sensible output.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19567
Summary:
Ref T13164. See PHI766. Currently, when file data is stored in small chunks, we submit each chunk to the indexing engine.
However, chunks are never surfaced directly and can never be found via any search/query, so this work is pointless. Just skip it.
(It would be nice to do this a little more formally on `IndexableInterface` or similar as `isThisAnIndexableObject()`, but we'd have to add like a million empty "yes, index this always" methods to do that, and it seems unlikely that we'll end up with too many other objects like these.)
Test Plan:
- Ran `bin/harbormaster rebuild-log --id ... --force` before and after change, saw about 200 fewer queries after the change.
- Uploaded a uniquely named file and searched for it to make sure I didn't break that.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19563
Summary:
Ref T13164. See PHI725. For real "*.search" methods, parameters get validated and you get an error if you use an empty list as a constraint.
Since "transaction.search" isn't really a normal "*.search" method, it doesn't benefit from this. Just do the check manually for now.
Test Plan: Made `transaction.search` calls with no constraints (got results); a valid costraint (got fewer results); and an invalid empty constraint (got an exception).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19562
Summary:
Ref T13164. See PHI797. The last edit is available in the page header, but it's not precise (just says "180 days ago") and a little weird (it's unusual for us to put that kind of information in the header).
Add a precise timestamp to the footer for now. I'd imagine re-examining this the next time Phriction gets some UI work and maybe trying to integrate timeline/transactions more cleanly (see also T1894).
Test Plan: Looked at a wiki page, then edited it. Saw precise "Last Edit" timestamp adjacent to "Last Author".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19560
Summary:
See D19558. This method has no callers and just wraps `diffusion.historyquery`, since D5960 (2013).
This was introduced in D315 (which didn't make it out of FB, I think) inside Facebook for unclear purposes in 2011.
Test Plan: Grepped for callers, found none.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: artms
Differential Revision: https://secure.phabricator.com/D19559
Summary:
`diffusion.getrecentcommitsbypath` fails with 500 error when non existing callsign is passed:
```
>>> UNRECOVERABLE FATAL ERROR <<<
Call to a member function getCommit() on null
```
Expected Behavior:
Return more graceful error notifying caller that such callsign/repository does not exist
Reproduction steps:
Open conduit: https://secure.phabricator.com/conduit/method/diffusion.getrecentcommitsbypath/
Enter:
callsign: "obviouslynotexisting"
path: "/random"
Click call method
Test Plan: after applying patch - call no longer fails with 500s
Reviewers: Pawka, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19558
Summary:
Depends on D19556. See PHI765. Ref T13164. Currently, if you type `H1` in this datasource, it isn't smart enough to pull up the right object.
Add support for querying by monogram. This is similar to existing support in Owners packages, etc.
Test Plan: Typed `H1` in the new push log filter, got the right object as a result in the typeahead.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19557
Summary: Depends on D19555. Ref T13164. See PHI765. An install is interested in getting a sense of the impact of a particular blocking rule, which seems reasonable. Support filtering for pushes blocked by a particular rule or set of rules.
Test Plan: {F5776385}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19556
Summary:
Ref T13164. See PHI765. We currently show "Rejected: Herald" in the push log UI, but don't show which rule rejected a push.
We store this data, and it's potentially useful: either for hunting down a particular issue, or for getting a general sense of how often a reject rule is triggering (maybe because you want to tune how aggressive it is).
Show this data in the web UI, and include it in the data export payload.
Test Plan:
- Pushed to a hosted repository so that I got blocked by a Herald rule.
- Viewed the push logs in the web UI, now saw which rule triggered things.
- Exported logs to CSV, saw Herald rule PHIDs in the data.
{F5776211}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19555
Summary:
Depends on D19550. Ref T13164. See T12144#226172, mostly. We get some requests to make milestones reorderable, but in most cases users probably wanted subprojects, not milestones.
One reason to end up here is that we put "Milestones" on top. Instead, put "Subprojects" on top, since they're the less specialized option and we aren't terribly consistent about it anyway.
Test Plan: Viewed project subprojects page, saw "Subprojects" above "Milestones".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19551
Summary: Depends on D19552. Ref T13164. We need this little `setObject(...)` hook to get the Space name into the search list UI.
Test Plan: Viewed project list, saw some Spaces listed.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19554
Summary:
Ref T13164. See PHI774. Fixes T12435.
Since Phriction is hierarchical, there isn't a super strong motivation to support Spaces: you can generally set policies on a small number of documents to get the desired effective policy behavior.
However, it still improves consistency and there's no reason //not// to support Spaces. In the case where you have some moderately weird/complex policy on one or more Spaces, using Spaces to define the policy behavior can make things a bit simpler and easier to understand.
This probably doesn't actually fix whatever the root problem in T12435 was (complicated, non-hierarchical access policies?). See also a bunch of discussion in T12442. So we might end up going beyond this to address other use cases, but I think this is reasonable regardless.
Test Plan: Created and edited Phriction documents and shifted them between Spaces. Searched by Space, etc.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13164, T12435
Differential Revision: https://secure.phabricator.com/D19553
Summary:
Depends on D19549. Ref T13164. See PHI774.
- Make milestones inherit their parent project's space automatically, like they inherit their parent policies.
- Make subprojects default to their parent project's space.
Test Plan: Created subprojects and milestones, got sensible default/effective Space behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19550
Summary:
See PHI774. Ref T13164. There is no reason projects //don't// support Spaces, just a vague concern that it's not hugely useful and might be a bit confusing.
However, it's at least somewhat useful (to improve consistency and reduce special casing) and doesn't necessarily seem more confusing than Projects are anyway. Support is trivial from a technical point of view, so just hook it up.
Test Plan: Created new projects, shifted projects between spaces. The support is all pretty much automatic.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19549
Summary:
Ref T12907. At least part of the problem is that we can hit PHP's `max_execution_time` limit on the file download pathway.
We don't currently set this to anything in the application itself, but PHP often sets it to 30s by default (and we have it set to 30s in production).
When writing responses, remove this limit. This limit is mostly a protection against accidental loops/recurison/etc., not a process slot protection. It doesn't really protect process slots anyway, since it doesn't start counting until the request starts executing, so you can (by default) //send// the request as slowly as you want without hitting this limit.
By releasing the limit this late, hopefully all the loops and recursion issues have already been caught and we're left with mostly smooth sailing.
We already remove this limit when sending `git clone` responses in `DiffusionServeController` and nothing has blown up. This affects `git clone http://` and similar.
(I may have had this turned off locally and/or just be too impatient to wait 30s, which is why I haven't caught this previously.)
Test Plan:
- Poked around and downloaded some files.
- Will `curl ...` in production and see if that goes better.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12907
Differential Revision: https://secure.phabricator.com/D19547
Summary:
See PHI766. Ref T13164. Build log chunk processing does a `preg_split()` on slices, but this isn't terribly efficient.
We can get the same count more cheaply by just using `substr_count()` a few times.
(I also tried `preg_match_all()`, which was between the two in speed.)
Test Plan:
- Used `bin/harbormaster rebuild-log --id X --force` to rebuild logs. Verified that the linemap is identical before/after this change.
- Saw local time for the 18MB log in PHI766 drop from ~1.7s to ~900ms, and `preg_split()` drop out of the profiler (we're now spending the biggest chunk of time on `gzdeflate()`).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19545
Summary:
See PHI785. Ref T13164. In this case, an install wants to receive mail via Mailgun, but not configure it (DKIM + SPF) for outbound mail.
Allow individual mailers to be marked as not supporting inbound or outbound mail.
Test Plan:
- Added and ran unit tests.
- Went through some mail pathways locally, but I don't have every inbound/outbound configured so this isn't totally conclusive.
- Hit `bin/mail send-test` with a no-outbound mailer.
- I'll hold this until after the release cut so it can soak on `secure` for a bit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19546
Summary:
Ref T13151. See PHI616. Fixes T8163.
This adds `/D123/new/`, which shows the changes to the revision since the last timeline action you took.
It also adds a link to this view to diff update emails.
Test Plan:
- Followed this link with a recent comment and no touches since update, ended up with sensible diff selections.
- Updated revision, generated email, saw an appropriate link.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151, T8163
Differential Revision: https://secure.phabricator.com/D19541
Summary:
See PHI751. Ref T13164. We added a "silent" flag for Editors somewhat recently (currently reachable only for bulk edits with `bin/bulk ...` command).
However, this flag doesn't carry through to the sub-editor when we make inverse edge edits. These are edits like "X is a parent of Y", which cause an implicit "Y is a child of X" edit to occur.
Pass the flag through.
Test Plan:
- Rigged the relationships controller to make silent edits.
- Changed the parents of a revision from the web UI. Saw no mail or feed stories.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19543
Summary:
See PHI749. Ref T13164. We currently misdetect files starting with `[submodule ...` as JSON.
Make this a bit stricter:
- If the file is short, just see if it's actually literally real JSON.
- If the file is long, give up.
This should get the right result in pretty much all the cases people care about, I think. We could make the long-file guesser better some day.
Test Plan: Detected a `[submodule ...` file (no longer JSON) and a `{"duck": "quack"}` file (still JSON).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13164
Differential Revision: https://secure.phabricator.com/D19544
Summary:
Fixes T13172. At one point we always capitalized all the text, and the cache uses capitalized text.
However, we stopped capitalizing the text at some point. Modern memes are more more subtle than old memes, and when we eventualy add support for things like "explodey brain" we'll certainly want to support mixed case.
Practically, this stops you from changing the capitalization of a cached meme. Get rid of the cache transform.
Test Plan:
none lul
(I don't have `gd` installed locally and buiding it requires building libjpeg and libpng or giving up and using `brew`. I'l vet this in production.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13172
Differential Revision: https://secure.phabricator.com/D19537
Summary:
See T7148. This just cheats us out of a weird sort of race where we:
- Dump an instance, including some `F123` which is a temporary file which expires in 3 minutes.
- A few minutes later, the daemons delete the data for that file.
- A few minutes after that, we try to `bin/files migrate --copy` to copy the data from S3 into the MySQL blob store.
- This fails since the data is already gone.
Instead, just skip these files since they're already dead to us.
Test Plan: Faked this locally, will migrate the PHI769 instance on `aux001`.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19536
Summary: I've pulled up this code probably three different times to make sure that the big scary warning does, in fact, still get printed even when passing `--unitest-fixtures` to `bin/storage destroy`. Make the warning message less scary if only removing test data.
Test Plan: Ran with and without `--unitest-fixtures` and saw expected warnings. After agreeing to warnings, test data was deleted as expected. Did not test `bin/storage destroy` without `--unittest-fixtures`.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19535
Summary:
When generating test data to solve a bug I have encountered, I noticed Lipsum was not working correctly for Differential Revisions and Pastes.
It seemed like they weren't updated after some refactoring. This fixes that by updating them.
Test Plan: Run Lipsum for all objects, and note that it has much less failure.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D19534
Summary:
Depends on D19529. See PHI778.
- Document the "name" constraint as deprecated. All callers are likely better served by the "query" constraint.
- Guide users toward the "query" constraint a little better.
- Document the `=` syntax.
Test Plan: Read various new documentation.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19531
Summary:
Ref PHI778. In D18492, I added support for parsing this operator, but did not actually implement it in the query engine.
Implementation is fairly straightforward. This supports querying for objects by exact title with `title:="exact title"`. This is probably a bad idea, but sometimes maybe useful anyway.
Test Plan: Queried for `title:="xxx"`, found only exact matches.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: ahoffer2
Differential Revision: https://secure.phabricator.com/D19529
Summary: Fixes T13171. Open to suggestions but that face looks real, real dumb on High Sierra.
Test Plan: Visited Config, saw a serious professional emoji in the page title.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13171
Differential Revision: https://secure.phabricator.com/D19530
Summary:
See PHI775. See D19499. Originally, see PHI720.
D19499 broke the standalone "Branches" page for commits. Normally, you reach this by taking these steps:
- View a commit which is contained by 11 or more branches.
- Click the "More Branches..." link in the "Branches" field.
- You should be taken to a list of all branches which contain the commit.
The change to the 'branch' parameter was adjusted in the query that builds the "x, y, z, More Branches..." list, but not on the actual "Branches" list with the full list. Adjust it.
Test Plan:
- Set display limit to 1, viewed a commit on "master" and "stable", clicked "More Branches".
- Before: saw only "master".
- After: saw both "master" and "stable".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19532
Summary:
Ref T13168. I'm not sure how this worked before, but I ran into this issue on my new laptop.
SiteSource accesses `PhabrictatorEnv::getEnvConfig('phabricator.base-uri')` when local, which may poison the cache and lock the value since we don't later discard the cache.
Specifically, when I access `http://locala.phacility.com`, I was getting an error like "You made a request for locala.phacility.com, but no configured site can serve this request.". This was because the base-uri was being incorrectly frozen as "local.phacility.com". The expectation is that it will match, so the standard PlatformSite will serve the request.
Test Plan:
- Before change: "no configured site" error.
- After change: local instance works properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13168
Differential Revision: https://secure.phabricator.com/D19526
Summary: Ref T13168. This is just a small quality-of-life fix: we can disclose which public key we're talking about because public keys are public.
Test Plan:
- Hit public key error (through my own bumbling / not reading or following instructions). Specifically, I haven't associated the key with a device in Almanac.
- Before: vague error.
- After: more specific error with enough key material that I could grep for it.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: yelirekim
Maniphest Tasks: T13168
Differential Revision: https://secure.phabricator.com/D19516
Summary:
See PHI746. See also T11833, perhaps. Ref T13151.
Long ago, parent revisions were called "dependent revisions". This was changed to "parent revisions" in the action UI to improve clarity, but not changed in the timeline stories.
Update the timeline stories to use the same language the actions in the UI use.
Test Plan:
{F5732876}
{F5732877}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19514
Summary:
Ref T13151. See PHI727. Update the dashboard widget/panel datasource to actually query results using what the user typed.
The current approach is blind to what the user typed when pulling results from the database, and gets limited to an artificially small number of results somewhere in the pipeline.
Test Plan:
- Queried for panels with text queries.
- Queried for panels with `W123` queries.
- This is substantially similar to the Owners datasource, which received a similar update in D17142 and has worked well since then.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19511
Summary:
Depends on D19509. Ref T13151. See PHI725. `transaction.search` supports "constraints" and the documentation mentions it in passing, but doesn't really show how to do it, and the method is not automatically self-documenting because it isn't a "real" `*.search` method.
Add an example of how to use the `contraints` parameter to retrieve information about only the relevant transactions.
Also remove a refernece to `requestb.in`, which is now defunct.
Test Plan: Called `transaction.search` with similar parameters.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19510
Summary:
See PHI725. Ref T13151. These actions are somewhat unusual and I considered different ways to represent them (make them look like "status" transactions; build multiple synthetic transactions) but ultimately landed on the simplest approach of just exposing them more or less as they exist internally.
I haven't included data for any of them. Most don't really have any data, but "accept" does. I'm holding off on providing more data until after T731, which may shake up the internal format.
Test Plan: Applied most of these transactions against a revision, queried for it with `transaction.search`, got distinguishable transactions out.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19509
Summary: See PHI725. Ref T13151. We currently try to load comments unconditionally, but not all objects (like projects) have comments. Only try to load comments if an object actually has comments.
Test Plan: Queried for an object with no comments, like project `#masonry`, via `transaction.search`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19507
Summary:
Ref T13151. See PHI725. By default, "transaction.search" doesn't provide details about transactions because many have bad/weird/policy-violating internal types or fields.
The "create" transaction is simple and straightforward, so label it to allow callers to distinguish it.
Test Plan:
- Created a new task.
- Called `transaction.search` on it.
- Saw the labelled "create" transaction.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: swisspol
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19505
Summary:
Depends on D19503. Ref T13151. See PHI719. If you have something like a script which updates an object in a loop, we can end up queueing many search reindex tasks.
These tasks may reasonably contend for the lock, especially if the object is larger (lots of text and/or lots of comments) and indexing takes a few seconds.
This isn't concerning, and the indexers should converge to good behavior quickly once the updates stop.
Today, they'll spew a bunch of serious-looking lock exceptions into the log. Instead, just yield so it's more clear that there's (normally) no cause for concern here.
Test Plan: Ran `bin/search index Txxx --force` on a large object in multiple windows with a 0 second lock, saw an explicit yield instead of a lock exception.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19504
Summary:
Depends on D19502. Ref T13151. See PHI719. An install ended up with an object with 111,000+ comments on it because someone wrote a script to treat it like a logfile.
Although we seem to do mostly okay with this (locally, it only takes about 30s to index a similar object) we'll hit a wall somewhere (since we need to hold everything in memory), and it's hard to imagine a legitimate object with more than 1,000 comments. Just ignore comments past the first thousand.
(Conpherence threads may legitimately have more than 1,000 comments, but go through a different indexer.)
Test Plan:
- Piped some comments into `maniphest.edit` in a loop to create a task with 100K comments.
- Ran `bin/search index Txxx --force` to reindex it, with `--trace`.
- Before: task indexed in about 30s.
- After: script loaded comments with LIMIT 1000 and indexed in a couple seconds.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19503
Summary:
Ref T13151. See PHI719. One minor hiccup in debugging the issue (which ended up being "revision has 100K comments") was that the `SearchWorker` did not show which object it was indexing.
Add `'objectPHID'` to the queue call so you can see which object is affected from the web UI.
Test Plan:
- Stopped daemons.
- Used `bin/search index D123 --background` to queue a search task.
- Viewed task details in web UI from `/daemon/`.
- Before change: no indication of which object was being indexed.
- After change: page helpfully shows that the task is indexing D123.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19502
Summary:
Fixes T13159. Two issues here:
- When viewing a particular config setting, there's an extra "Config" crumb.
- On the page for a config group, the link to the parent group has an extra "/config/" in it.
Test Plan:
- Viewed a page for a particular setting, no longer saw an extra "Config" crumb.
- Viewed a page for a setting group, clicked parent crumb, got taken to a real page.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13159
Differential Revision: https://secure.phabricator.com/D19501
Summary:
Ref T13151. See PHI720. If you want to test if commit X appears on specific branch Y, `git branch --contains X -- Y` is faster than (effectively) `git branch --contains X | grep Y`.
Since this call has a "branch" parameter anyway, use it as the pattern argument if provided.
Test Plan:
- Called the API method with no parameters, got all branches.
- Called the API method with `master`, got just master.
- Called the API method with `maste*`, got master. This behavior is not officially supported and may change in the future.
- Viewed a commit, still saw all branches.
- Grepped for `diffusion.branchquery` and verified that no remaining callsites pass a default "branch" parameter.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19499
Summary: Fixes T13155. Ref T13151. A recent change (D19455) changed the return format here, but I missed this special case for empty commits.
Test Plan:
- T13155 has a good set of reproduction instructions.
- Pushed an empty commit.
- Before: bunch of warning log spew.
- After: clean logs.
Reviewers: amckinley, avivey
Reviewed By: avivey
Maniphest Tasks: T13155, T13151
Differential Revision: https://secure.phabricator.com/D19500
Summary: I landed D19491 a little aggressively, so allow this field to be null until after the migration goes out.
Test Plan: Loaded commits without identity objects; did not get any errors.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19496
Summary: Ref T12164. Make it easier to work with identity objects by attaching them to commits and attaching users to identities.
Test Plan: Loaded some commits with `->needIdentities(true)` and checked the resulting objects.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19491
Summary: This never worked.
Test Plan: Ran `bin/repository rebuild-identities` and viewed identity objects with `currentEffectiveUserID`s and no longer got errors about attempting to attach `null` objects instead of `PhabricatorUser` objects.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19495
Summary:
See <https://discourse.phabricator-community.org/t/commit-6011085b0fcd-breaks-sending-certain-email/1571>. Some mailers get upset if we `setHTMLBody(...)` with an empty string.
There's some possible argument they should be more graceful about this, but it's reasonably pretty ambiguous.
Only try to set the HTML body if we actually have a nonempty HTML body.
Test Plan:
- Configured an "smtp" mailer.
- Ran `echo hi | ./bin/mail send-test --to someone@somewhere.com --subject test`.
- Before: error about empty message body.
- After: no more message body error.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19494
Summary:
Ref T13151. Ref T12164. Two small tweaks:
- If we aren't actually going to change anything, just skip the writes. This makes re-running/resuming a lot faster (~20x, locally).
- Print when we touch a commit so there's some kind of visible status.
This is just a small quality-of-life tweak that I wrote anyway while investigating T13152, and will make finishing off db024, db025 and db010 manually a little easier.
Test Plan:
- Set `authorIdentityPHID` + `committerIdentityPHID` to `NULL`.
- Ran `rebuild-identities`, saw status information.
- Ran `rebuild-identiites` again, saw it go faster with status information.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151, T12164
Differential Revision: https://secure.phabricator.com/D19484
Summary:
Ref T13151. See T11767. See PHI686. Although we limit outbound mail text bodies, the limit doesn't currently apply to attachments, HTML bodies, or headers. T11767 discusses improving this in the general case.
In the wild, an install hit an issue (see PHI686) where edits to Phriction pages generate very large HTML bodies. Check and respect the limit when building HTML bodies.
If we don't have enough room for the HTML body, we just drop it. We have the text body to fall back to, and HTML is difficult to truncate safely.
Test Plan: Added unit tests and made them pass.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19489
Summary:
Ref T13151. See PHI683. Ref T12314.
You can currently change object subtypes via Conduit (`maniphest.edit`) but not via the web UI.
Changing object subtypes is inherently a somewhat-perilous operation that likely has a lot of rough edges we'll need to smooth over eventually, mostly around changing an object from subtype X to subtype Y, where some field exists on one but not the other. This isn't a huge issue, just not entirely intuitive.
It should also, in theory, be fairly rare.
As a reasonable middle ground, provide web UI access via the bulk editor. This makes it possible, but doesn't clutter the UI up with a rarely-used option with rough edges.
Test Plan:
- With subtypes not configured, saw a normal bulk editor with no new option.
- With subtypes configured, swapped tasks subtypes via bulk editor.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151, T12314
Differential Revision: https://secure.phabricator.com/D19490
Summary:
Depends on D19487. Ref T13151. See PHI647. For some objects, like revisions, we can build slightly more useful secure email without actually disclosing anything.
In the general case, the object monogram may disclose information (`#acquire-competitor`) but most do not, so applications can whitelist an acceptable nondisclosing subject and link.
Support doing this, and make Differential do it. When we don't have a whitelisted URI but do know the object the mail is about, include a generic PHID-based URI; these are always nondisclosing.
Test Plan:
- Without the Differential changes, sent normal mail (no changes) and secure mail (new generic PHID-based link).
- With the Differential changes, sent secure mail; got richer subject and body link.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19488
Summary:
Ref T13151. See PHI647. This allows us to link to any object by PHID, without disclosing information in the monogram (like `#fire-steve`).
This capability is relevant when building "secure mail", to provide a link to the object regardless of whether the monogram discloses information or not.
Test Plan: Visited `/object/D123/` (redirect), `/object/xyz/` (404), `/object/PHID-DREV-.../` (redirect).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19487
Summary:
Ref T13151. See PHI702. An install is interested in a "members of all projects" (vs "members of any project", which is currently implemented) rule.
Although this is fairly niche, I think it's reasonable and doesn't have much of a maintenance cost.
This could already be implemented as an extension, but it would have to copy/paste a bunch of code.
Test Plan:
- Ran unit tests.
- Used the UI to select this policy for a task, with various values. Joined/left projects to satisfy/fail the rule. Behavior seemed correct.
- Used the UI to select the existing policy rule ("any project"), joined/left projects to satisfy/fail the rule. Doesn't look like I broke anything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19486
Summary:
Ref T13151. See PHI701. Unified diffs are currently missing the logic to apply the "old-full" and "new-full" classes, which results in a too-light coloration for fully added or removed lines.
Make this logic consistent with the two-up renderer so we use the same colors in both.
Test Plan: Viewed diffs and swapped between 1-up and 2-up renderers, now saw the same coloration.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19482
Summary: Ref T13152. The pager does a bit of magic here and doesn't populate `nextPageID` when it knows it got an exact final page. The logic misfired in this case and sent us back to the start.
Test Plan:
- Set page size to 1 to guarantee rows were an exact multiple of page size.
- Ran `rebuild-identities` (I no-op'd the actual logic to make it faster).
- Before: looped forever.
- After: clean exit after processing everything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13152
Differential Revision: https://secure.phabricator.com/D19479
Summary:
Ref T13151. See PHI654. Depends on D19477. If you have long package names, the table of contents (e.g., in Differential) can end up expanding to be gigantic.
Getting tables to behave nicely is hard (or, at least, I can't figure it out after spending a decent amount of time on it; see also `AphrontTableView::renderSingleDisplayLine()`). I tried a bunch of things and Googled for a bit but didn't make any progress on finding a CSS solution. Just truncate the package names to get reasonable behavior without falling down any kind of CSS rabbit hole.
Test Plan:
- Created a package named "Very long package name...".
- Created a package named "MMMMMMMMMMMMMMMMMMMMMM...".
- Had them own a file in a Differential revision, viewed that revision.
- Before: table is pushed out to several times the browser window width and everything is kind of a mess.
- After: package names get truncated to something reasonable.
{F5652953}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19478
Summary:
Ref T13151. See PHI684. Currently, the `MailableFunction` datasource does not include Owners packages, but they are valid subscribers and the `Mailable` datasource includes them.
Include them in the `MailableFunction` datasource, too.
Test Plan: Searched for revisions with particular package subscribers, got expected results in the UI (tokenizer knew about packages) and response.
Reviewers: amckinley, jmeador
Reviewed By: jmeador
Maniphest Tasks: T13151
Differential Revision: https://secure.phabricator.com/D19476
Summary:
Fixes T13145. The list controllers properly support public access already, but some of the view/detail controllers did not.
Allow logged-out users to browse builds, buildables, plans, etc., provided they can see the corresponding objects.
Test Plan: As a logged-out user, browsed around builds, build plans, logs, etc., without hitting any login pages.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13145
Differential Revision: https://secure.phabricator.com/D19459
Summary:
See PHI689. It can be difficult to distinguish between cards with the same number but different expiration dates (common when the bank sends you a new card).
For now, show the expiration date on the cart checkout screen.
Test Plan: Viewed a cart checkout screen with multiple cards, saw expiration dates.
Reviewers: amckinley
Differential Revision: https://secure.phabricator.com/D19462
Summary:
Depends on D19443. Creates a workflow for populating the new identity table by iterating over commits, either one repo at a time or all at once. Locally caches identities to avoid fetching them `inf` times. An actual migration that invokes this workflow will come in another revision that won't land until at least next week.
Performance is ~2k commits in 4.9s on my local machine.
Test Plan: Ran locally a few times with a few different states of the `repository_identity` table.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: jcox, Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19446
Summary: Depends on D19429. Depends on D19423. Ref T12164. This creates new columns `authorIdentityPHID` and `committerIdentityPHID` on commit objects and starts populating them. Also adds the ability to explicitly set an Identity's assignee to "unassigned()" to null out an incorrect auto-assign. Adds more search functionality to identities. Also creates a daemon task for handling users adding new email address and attempts to associate unclaimed identities.
Test Plan: Imported some repos, watched new columns get populated. Added a new email address for a previous commit, saw daemon job run and assign the identity to the new user. Searched for identities in various and sundry ways.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19443
Summary: Depends on D19423. Ref T12164. Adds controllers capable of listing and editing `PhabricatorRepositoryIdentity` objects. Starts creating those objects when commits are parsed.
Test Plan: Reparsed some revisions, observed objects getting created in the database. Altered some `Identity` objects using the controllers and observed effects in the database. No attempts made to validate behavior under "challenging" author/committer strings.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19429
Summary: Ref T12164. Start building initial objects for managing `RepositoryIdentity` objects. This won't land until much more of the infrastructure is in place.
Test Plan: Ran `bin/storage upgrade` and observed expected table.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19423
Summary:
Ref T13142. When commits are pushed, we try to handle them on one of two pathways:
- Normal changes: we load these into memory and potentially apply Herald content rules to them.
- "Enormous" changes: we don't load these into memory and skip content rules for them.
The goal is to degrade gracefully when users push huge changes: they should work, just not support all the features.
However, some changes can slip through the cracks right now:
- If you push a lot of commits at once, we'll try to cache all of the changes smaller than 1GB in memory. This can require an arbitrarily large amount of RAM.
- We calculate sizes by just looking at the `strlen()` of the diff, but a changeset takes more RAM in PHP than the raw diff does. So even if a diff is "only" 500MB, it can take much more memory than that. On systems with relatively little memory available, this may result in OOM while processing changes that are close to the "enormous" limit.
This change makes two improvements:
- Instead of caching everything, cache only 64MB of things.
- For most pushes, this is the same, since they have less than 64MB of diffs.
- For pushes of single very large changes, this is a bit slower (more CPU) since we have to do some work twice.
- For pushes of many changes, this is slower (more CPU) since we have to do some work twice, but, critically, doesn't require unlimited memory.
- Instead of flagging changes as "enormous" at 1GB, flag them as "enormous" at 256MB.
- This reduces how much memory is required to process the largest "non-enormous" changes.
- This also gets us under Git's hard-coded 512MB "always binary" cutoff; see T13143.
- This is still completely gigantic and way larger than any normal change should be.
An additional improvement would be to try to reduce the amount of memory we need to use to hold a change in process memory. I think the other changes here alone will fix the immediate issue in PHI657, but it would be nice if the "largest non-enormous change" required only a couple gigs of RAM.
Test Plan:
- Used `ini_set('memory_limit', '1G')` to artificially limit memory to 1GB.
- Pushed a series of two commits which add two 550MB text files (Temporarily, I added a `--binary` flag to trick Git into showing real diffs for these, see T13143.)
- Got a memory limit error.
- Applied the "cache only 64MB of stuff" and "consider 256MB, not 1GB, to be enormous" changes.
- Pushed again, got properly rejected as enormous.
- Added `memory_get_usage()` calls to measure how actual memory size and reported "size" estimate compare. For these changes, saw a 639MB diff require 31,479MB of memory, i.e. a factor of about 50x. This is, uh, pretty not great.
- Allowed enormous changes, pushed again, push went through.
Reviewers: amckinley
Maniphest Tasks: T13142
Differential Revision: https://secure.phabricator.com/D19455
Summary:
Ref T13141. Currently, during first-time setup we don't surface all the details about connection exceptions that we could: the underlying exception is discarded inside cluster connection management.
This isn't a huge issue since the reason for connection problems is usually fairly obvious, but in at least one case (see T13141) we hit a less-than-obvious exception.
Instead, store the original exception and propagate the message up the stack so users have more information about the problem.
Test Plan:
- Configured an intentionally bad MySQL username.
- Restarted Apache and loaded Phabricator.
- Got a more helpful exception with a specific authentication error message.
{F5622361}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13141
Differential Revision: https://secure.phabricator.com/D19454
Summary:
Ref T13137. See that task for discussion.
When we show a diff-of-diffs, we often render stubs for files which didn't change between the diffs. These stubs usually aren't a big deal, but for certain types of changes (like refactors) they can create a lot of clutter.
Instead, hide these stubs and show a notice that we hid them.
Test Plan:
- Created a revision affecting 4 files.
- Updated it with a diff that changed only 1 of the 4 files.
- Added an inline comment to a different file.
- Viewed the diff of diffs.
- Before: 4 changesets with two "nothing changed" stubs.
- After: 2 changesets with the stubs hidden.
{F5621083}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13137
Differential Revision: https://secure.phabricator.com/D19453
Summary:
Ref T13137. The "analyze/cache data about changesets" step is becoming more involved. We recently added detection for generated code to support "Ignore generated changes" in Owners, and I now plan to hash the new file content so we can hide changes which have no effect.
Before adding this new hashing step, pull the "detect copied code" and "detect generated code" stuff out and move them to a separate `ChangesetEngine`. Then support doing a changeset rebuild directly with `bin/differential rebuild-changesets`.
This simplifies things a bit and makes testing easier since you don't need to keep creating new revisions to re-run copy/generated/hash logic.
Test Plan: Ran `bin/differential rebuild-changesets --revision Dxxx`, saw changesets rebuild. See also next change.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13137
Differential Revision: https://secure.phabricator.com/D19452
Summary:
Fixes T13140. See PHI660.
Recent versions of Subversion can send a `(get-file true false false )` protocol frame with extra space between "false" and "false". This is allowed by the protocol spec, but never normally happens, and we do not parse it correctly.
Instead, parse it correctly.
Test Plan:
- Added unit tests.
- Ran `svn proplist svn+ssh://.../diffusion/X/file.c` under SVN 1.10 before and after the change.
- Before: indefinite hang.
- After: completed in finite time.
Reviewers: amckinley, asherkin
Reviewed By: amckinley, asherkin
Maniphest Tasks: T13140
Differential Revision: https://secure.phabricator.com/D19451
Summary:
See D19446. This should make it easier to process larger, more complex result sets in constant memory.
Today, `LiskMigrationIterator` takes constant memory but can't apply `needX()` reqeusts or `withY(...)` constraints.
Using a raw `Query` can handle this stuff, but requires memory proportional to the size of the result set.
Offer the best of both worlds: constant memory and full access to the power of `Query` classes.
Test Plan:
Used this script to iterate over every commit, saw sensible behavior:
```name=list-commits.php
<?php
require_once 'scripts/init/init-script.php';
$viewer = PhabricatorUser::getOmnipotentUser();
$query = id(new DiffusionCommitQuery())
->setViewer($viewer);
$iterator = new PhabricatorQueryIterator($query);
foreach ($iterator as $commit) {
echo $commit->getID()."\n";
}
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19450
Summary: Ref PHI662. Viewing a dashboard you don't have permission to view (in the Dashboard application) currently fatals while building crumbs, since we fail to build the ` ... > Dashboard 123 > ...` crumb.
Test Plan:
- Viewed a dashboard I didn't have permission to view in the Dashboards application.
- Before patch, fatal when calling `getID()` on a non-object.
- After patch, sensible policy error page.
- Viewed a dashboard I can view, saw sensible crumbs.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19449
Summary:
See <https://hackerone.com/reports/351361>. We currently require MFA on the screen leading into the user create flow, but not the actual create flow.
That is, `/people/create/` (which is just a "choose a type of account" page) requires MFA, but `/people/new/<type>/` does not, even though this is the actual creation page.
Requiring MFA to create users isn't especially critical: creating users isn't really a dangerous action. The major threat is probably just that an attacker can extend their access to an install by creating an account which they have credentials for.
It also isn't consistently enforced: you can invite users or approve users without an MFA check.
So there's an argument for just removing the check. However, I think the check is probably reasonable and that we'd likely prefer to add some more checks eventually (e.g., require MFA to approve or invite) since these actions are rare and could represent useful tools for an attacker even if they are not especially dangerous on their own. This is also the only way to create bot or mailing list accounts, so this check does //something// on its own, at least.
Test Plan:
- Visited `/people/new/standard/` as an admin with MFA configured.
- Before patch: no MFA prompt.
- After patch: MFA prompt.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19448
Summary: Ref T13137. See PHI592. Depends on D19444. Apply a limit up front to stop patches which are way too big (e.g., 600MB of videos) from generating in the first place.
Test Plan:
- Configured inline patches in git format.
- Created a normal revision, got an inline git patch.
- Created a revision with a 10MB video file, got no inline patch.
- (Added a bunch of debugging stuff to make sure the internal pathway was working.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13137
Differential Revision: https://secure.phabricator.com/D19445
Summary:
See <https://discourse.phabricator-community.org/t/maniphest-home-page-crash-after-d19417/1445/3>. These special-token-only searches currently end up populating an empty `ownerPHIDs`, which fatals after the stricter check in D19417.
Make the fatal on `withConstraint(array())` explicit and only set the PHID constraint if we have some PHIDs left.
Test Plan: Searched for "No Owner", "Any Owner", an actual owner, "No Owner + actual user".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19440
Summary:
See PHI652. When you `echo x | arc paste` today, you end up with a Paste object that has the empty string as its "language".
This is normally not valid. Pastes where the language should be autodetected should have the value `null`, not the empty string.
This behavior likely changed when `paste.create` got rewritten in terms of `paste.edit`. Adjust the implementation so it only adds the LANGUAGE transaction if there's an actual language.
Also, fix an issue where you can't use the "delete" key to delete tokens with the empty string as their value.
Test Plan:
- Created a paste with `echo x | arc paste`, got a paste in autodetect mode instead of with a bogus language value.
- Created a paste with `echo x | arc paste --lang rainbow`, got a rainbow paste.
- Deleted an empty string token with the keyboard.
- Deleted normal tokens with the keyboard.
- Edited subscribers/etc normally with the keyboard and mouse to make sure I didn't ruin anything.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19437
Summary:
See PHI624. Some of the mobile navigation and breadcrumbs in support pacts aren't as good as they could be.
In particular, we generally collapse crumbs on mobile to just the first and last crumbs. The first crumb is the application; the last is the current page.
On `/PHIxxx` pages, the first crumb isn't very useful since the Support landing page is two levels up: you usually want to go back to the pact, not all the way back to the Support landing page.
We also don't need the space since the last crumb (`PHIxxx`) is always small.
Allow Support and other similar applications to tailor the crumb behavior more narrowly if they end up in situations like this.
Test Plan:
- With an additional change to instances (see next diff), viewed a support issue page (`/PHI123`) on mobile and desktop.
- Saw a link directly back to the pact on both mobile and desktop.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19438
Summary:
Ref T13137. See PHI609. An install would like to filter audit requests on a particular branch, e.g. "master".
This is difficult in the general case because we can not apply this constraint efficiently under every conceivable data shape, but we can do a reasonable job in most practical cases.
See T13137#238822 for more detailed discussion on the approach here.
This is a bit rough, but should do the job for now.
Test Plan:
- Filtered commits by various branches, e.g. "master"; "lfs". Saw correct-seeming results.
- Stubbed out the "just list everything" path to hit the `diffusion.internal.ancestors` path, saw the same correct-seeming results.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13137
Differential Revision: https://secure.phabricator.com/D19431
Summary:
See <https://discourse.phabricator-community.org/t/maniphest-non-integer-point-values-in-csv-export/1443>.
We currently export the Maniphest "points" field as an integer, but allow it to accept decimal values (e.g. "6.25").
Also fix a bug where we wouldn't roll over from "..., X, Y, Z, AA, AB, ..." correctly for Excel column names if sheet had more than 26 columns.
Test Plan:
- Set a task point value to 6.25.
- Exported to text, JSON, XLS.
- Saw 6.25 represented accurately in exports.
- Exported an excel sheet with 27+ columns.
- Manually printed the first 200 column names to check that the algorithm looks correct.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19434
Summary:
See PHI251. Ref T13137.
- Replace the perplexing text box with a checkbox that explains what it does.
- Mention this feature in the documentation.
Test Plan:
- Clicked/unclicked checkbox.
- Read documentation.
- Used an existing checkbox control in Slowvote to make sure I didn't break it.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13137
Differential Revision: https://secure.phabricator.com/D19433
Summary:
See <https://discourse.phabricator-community.org/t/hidden-description-field-in-maniphest-task-breaks-form/1432>.
If you hide the "Description" field in Maniphest, we still try to render a remarkup preview for it. This causes a JS error and a nonfunctional element on the page.
Instead, hide the preview panel if the field has been locked or hidden.
Test Plan:
- Hid the field, loaded the form, no more preview panel / JS error.
- Used a normal form with the field visible, saw a normal preview.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19432
Summary:
See PHI638. When a diff is large (between 100 and 1000 files), we collapse content by default unless a change also has inline comments.
This rule isn't explicitly explained anywhere. Although it's not really a critical rule, it fits easily enough into the UI callout.
Also render the UI callout in a slightly more modern way and avoid `hsprintf()`.
Test Plan:
{F5596496}
- Also, clicked the "Expand" link and saw everything expand properly.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19430
Summary:
Depends on D19427. Ref T13130. See PHI251. Support configuring owners packages so they ignore generated paths.
This is still a little rough. A couple limitations:
- It's hard to figure out how to use this control if you don't know what it's for, but we don't currently have a "CheckboxesEditField". I may add that soon.
- The attribute ignore list doesn't apply to Diffusion, only Differential, which isn't obvious. I'll either try to make it work in Diffusion or note this somewhere.
- No documentation yet (which could mitigate the other two issues a bit).
But the actual behavior seems to work fine.
Test Plan:
- Set a package to ignore paths with the "generated" attribute. Saw the package stop matching generated paths in Differential.
- Removed the attribute from the ignore list.
- Tried to set invalid attributes, got sensible errors.
- Queried a package with Conduit, got the ignored attribute list.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19428
Summary:
Depends on D19426. Ref T13130. Ref T13065. While I'm making changes to Owners for "Ignore generated paths", clean up the "mailKey" column.
We recently (D19399) added code to automatically generate and manage mail keys so we don't need a ton of `mailKey` properties in the future. Migrate existing mail keys and blow away the explicit column on packages.
Test Plan: Ran migration, manually looked at the database and saw sensible data. Edited a package to send some mail, which looked good.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13130, T13065
Differential Revision: https://secure.phabricator.com/D19427
Summary:
Depends on D19425. Ref T13130. See PHI251. Now that changesets have a durable "generated" attribute, we can let owners packages check it when we're computing which packages are affected by a revision.
There's no way to actualy configure a package to have this behavior yet.
Test Plan:
- Created a revision affecting a generated file and a non-generated file.
- When I faked `mustMatchUngeneratedPaths()` to `return true;`, saw the non-generated file get no packages owning it.
- Normally: lots of packages owning it).
- Created a revision affecting only generated files.
- When I faked things, saw no Owners actions trigger.
- Normally: some packages added reviewers or subscribers.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19426
Summary:
Ref T13130. See PHI251. Currently, changesets are marked as "generated" (i.e., the file contains generated code and does not normally need to be reviewed) at display time.
An install would like support for having Owners rules ignore generated files. Additionally, future changes anticipate making "generated" and some other similar behaviors more flexible and more general.
To support these, move toward a world where:
- Changesets have "attributes": today, generated. In the future, perhaps: third-party, highlight-as, encoding, enormous-text-file, etc.
- Attributes are either "trusted" (usually: the server assigned the attribute) or "untrusted" (usually: the client assigned the attribute). For attributes like "highlight-as", this isn't relevant, but I'd like to provide tools so that you can't make `arc` mark every file as "generated" and sneak past review rules in the future.
Here, the `differential.generated-paths` config can mark a file as "generated" with a trusted attribute. The `@generated`-in-content rule can mark a file as "generated" with an untrusted attribute.
Putting these attributes on changesets at creation time instead of display time will let Owners interact with changesets cheaply: it won't have to render an entire changeset just to figure out if it's generated or not.
Test Plan:
- Created a revision touching several files, some generated and some not.
- Saw the generated files get marked properly with attribute metadata in the database, and show/fold as "Generated" in the UI.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19425
Summary:
Fixes T13135. See PHI633. For at least some video files with legitimate MIME type "video/quicktime", Chrome can play them but refuses to if the `<source />` tag has a `type="video/quicktime"` attribute.
To trick Chrome into giving these videos the old college try, omit the "type" attribute. Chrome then tries to play the video, seems to realize it can, and we're back on track.
Since the "type" attribute is theoretically only useful to help browsers select among multiple different alternatives and we're only presenting one alternative, this seems likely safe and reasonable. Omitting "type" also validates. It's hard to be certain that this won't cause any collateral damage, but intuitively it seems like it should be safe and I wasn't able to identify any problems.
Test Plan:
- Watched a "video/quicktime" MP4 cat video in Chrome/Safari/Firefox.
- See T13135 for discussion, context, and discussion of the behavior of some smaller reproduction cases.
Reviewers: amckinley, asherkin
Reviewed By: amckinley
Maniphest Tasks: T13135
Differential Revision: https://secure.phabricator.com/D19424
Summary:
Fixes T13132. I removed this branch in D19156 when tightening the logic for the new CSP header, but there's a legitimate need for it: downloading files via `arc download`, or more generally being an API consumer of files.
This is not completely safe, but attacks I'm aware of (particularly, cookie fixation, where an attacker could potentially force a victim to become logged in to an account they control) are difficult and not very powerful. We already issue clear setup advice about the importance of configuring this option ("Phabricator is currently configured to serve user uploads directly from the same domain as other content. This is a security risk.") and I think there's significant value in letting API clients just GET file data without having to jump through a lot of weird hoops.
Test Plan:
- With `security.alternate-file-domain` off, tried to `arc download` a file.
- Before: downloaded an HTML dialog page.
- After: downloaded the file.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13132
Differential Revision: https://secure.phabricator.com/D19421
Summary:
Ref T13130. See <https://discourse.phabricator-community.org/t/unable-to-create-owners-package-with-same-path-in-multiple-repositories/1400/1>.
When you edit paths in Owners, we deduplicate similar paths, like `/x/y` and `/x/y/`. However, this logic currently only examines the paths, and incorrectly deduplicates the same path in different repositories.
Instead, consider the repository before deduplicating.
Test Plan:
- Edited an Owners package and added the path "/" in two different repositories.
- Before: only one surived the edit.
- After: both survived.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19420
Summary: See PHI611 for details.
Test Plan:
Ran a Buildkite build, saw Buildkite confirm receipt of these parameters in the HTTP response:
{F5562054}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19419
Summary:
Depends on D19416. Ref T13110. Ref T13130. See PHI598. When rendering a "Very Large" revision (affecting more than 1,000 files) we currently compute the package/changeset ownership map normally.
This is basically a big list of which packages own which of the files affected by the change. We use it to:
# Show which packages own each file in the table of contents.
# Show an "(Owns No Changed Paths)" hint in the reviewers list to help catch out-of-date packages that are no longer relevant.
However, this is expensive to build. We don't render the table of contents at all, so (1) is pointless. The value of (2) is very small on these types of changes, and certainly not worth spending many many seconds computing ownership.
Instead, just skip building out these relationships for very large changes.
Test Plan: Viewed a very large change with package owners; verified it no longer built package map data and rendered the package owners with no "(Owns No Changed Paths)" hints.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130, T13110
Differential Revision: https://secure.phabricator.com/D19418
Summary:
Ref T13110. Ref T13130. When a revision is "large" (100 - 1000 files) we hide the actual textual changes by default. When it is "very large" (more than 1000 files) we hide all the changesets by default.
For "very large" diffs, we currently still show the "large" warning, which doesn't really make sense since there aren't any actual changesets.
When a diff is "very large", don't show the "large" warning.
Test Plan:
- Viewed a small diff (<100 files), saw no warnings.
- Viewed a large diff (100-1000 files), saw just the large warning.
- Viewed a very large diff (>1000 files).
- Before: both "large" and "very large" help warnings.
- After: just "very large" warnings.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130, T13110
Differential Revision: https://secure.phabricator.com/D19416
Summary:
See PHI604. Ref T13130. Ref T13105. There's currently no way to turn blame off in Diffusion. Add a "Hide Blame" option to the "View Options" dropdown so it can be toggled off.
Also fix a couple of bugs around this: for example, if you loaded a Jupyter notebook and then switched to "Source" view, blame would incorrectly fail to activate because the original rendering of the "stage" used an asynchronous engine so `willRenderRef()` wasn't called to populate blame.
Test Plan:
- Viewed a source file, toggled blame off/on, reloaded page to see state stick in URL.
- Viewed a Jupyter notebook, toggled to "Source" view, saw blame.
- Viewed stuff in Files (no blame UI options).
- Tried to do some invalid stuff like toggle blame on a non-blame engine (options disable properly).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130, T13105
Differential Revision: https://secure.phabricator.com/D19414
Summary: See discussion in D19415.
Test Plan: Searched for some owners, found tasks as expected.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19417
Summary:
See PHI285. Ref T13130. After recent changes Herald sends email about rules, but the mail doesn't currently actually include a link to the rule.
Include a link for consistency and ease-of-use.
Test Plan: Edited a rule, looked at the resulting mail, saw a link to the rule.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19413
Summary:
Fixes T13128. Ref PHI590. This is a rough-and-ready implementation of a new `PhabricatorPolicyCodex->compareToDefaultPolicy()` method that subclasses can override to handle special cases of policy defaults. Also implements a `PolicyCodex` for Phriction documents, because the default policy of a Phriction document is the policy of the root document.
I might break this change into two parts, one of which maintains the current behavior and another which implements `PhrictionDocumentPolicyCodex`.
Test Plan: Created some Phriction docs, fiddled with policies, observed expected colors in the header. Will test more comprehensively after review for basic reasonable-ness.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, swisspol
Maniphest Tasks: T13128
Differential Revision: https://secure.phabricator.com/D19409
Summary:
See PHI615. Ref T13130. An install is reporting that "Lease Working Copy" build steps always report "Built instantly" after completion.
I'm not 100% sure that this is the fix, but I'm like 99% sure: "Lease Working Copy" build steps yield after they ask Drydock for a lease. They will later reenter `doWork()`, see that the lease is filled, and complete.
Right now, we reset the start time every time we enter `doWork()`. Instead, set it only if it hasn't been set yet.
Test Plan: This is low-risk and a bit tricky to reproduce locally, but I'll run some production builds and see what they look like.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19412
Summary:
Ref T13130. See PHI619. Currently, the Herald "Test Console" doesn't pass a "Content Source" to the adapter, so if any rules of the given type execute a "Content source" field rule, they'll fatal.
Provide a content source:
- If possible, use the content source from the most recent transaction.
- Otherwise, build a default "web" content source from the current request.
Test Plan:
- Wrote a "When [content source][is][whatever]" rule for tasks.
- Ran test console against a task.
- Before: got a fatal trying to interact with the content source.
- After: transcript reports sensible content source.
- Also commented out the "xaction" logic to test the fallback behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19411
Summary:
Ref T13103. Locally, I managed to break the data for a bunch of files by doing `git clean -df` in a working copy that I'd updated to a commit from many many years ago. Since `conf/local.json` wasn't on the gitignore list many years ago, this removed it, and I lost my encryption keyring.
I've symlinked my local config to a version-controlled file now to avoid this specific type of creative self-sabotage in the future, but this has exposed a few cases where we could handle things more gracefully.
One issue is that if your favicon is customized but the file it points at can't actually be loaded, we fail explosively and you really can't do anything to move forward except somehow guess that you need to fix your favicon. Instead, recover more gracefully.
Test Plan:
- Configure file encryption.
- Configure a favicon.
- Remove the encryption key from your keyring.
- Purge Phabricator's caches.
- Before: you pretty much dead-end on a fatal that's hard to understand/fix.
- After: everything works except your favicon.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13103
Differential Revision: https://secure.phabricator.com/D19406
Summary:
See <https://twitter.com/HayleyCAnderson/status/988873585363009536>.
Currently, the action dropdown in Differential shows a heavy "X" after "Request Changes" and a heavy checkmark after "Accept Revision".
Although I'm not convinced that the messaging around "Request Changes" is too strong, I do think these marks are out of place in modern Differential. They came from a simpler time when this dropdown had fewer actions, but feel a little weird and inconsistent to me in the modern UI.
Let's try getting rid of them and see how it goes?
Test Plan:
- Viewed these actions in the dropdown, no longer saw the mark icons.
- Grepped for these unicode sequences without getting any other hits.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19405
Summary:
Depends on D19400. Ref T13130. Currently, when you write Herald rules about other Herald rules, you can't pick a rule type or content type, so there's no way to get notified about edits to just global rules (which is the primary driving use case).
Add a "Content type" field to let the rule match rules that affect revisions, tasks, commits, etc.
Add a "Rule type" field to let the rule match global, personal, or object rules.
Test Plan:
- Wrote a global rule for other rules about global Herald rules:
{F5540307}
{F5540308}
- Ran it against itself which matched:
{F5540309}
- Ran it against another rule (not a global rule about Herald rules), which did not match:
{F5540311}
- Also reviewed the fields in those transcripts in more detail to make sure they were extracting matching correctly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19403
Summary: This word isn't the right word.
Test Plan: Reading?
Reviewers: avivey, amckinley
Reviewed By: avivey
Differential Revision: https://secure.phabricator.com/D19404
Summary:
Depends on D19399. Ref T13130. This adds basic support for writing Herald rules against Herald rules. See T13130 for a lot more detail.
This needs a bit more work to be useful: for example, there's no way to specify the rule type or subject, so you can't say "notify me when global rules are edited" or "notify me when Maniphest rules are edited". I'll add some fields for that in followup changes to actually solve the original use case.
Test Plan:
- Wrote Herald rules against Herald rules.
- Ran them by editing rules and in the test console.
- Verified they sent some mail with `bin/mail list-outbound`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19400
Summary:
Ref T13065. `mailKey`s are a private secret for each object. In some mail configurations, they help us ensure that inbound mail is authentic: when we send you mail, the "Reply-To" is "T123+456+abcdef".
- The `T123` is the object you're actually replying to.
- The `456` is your user ID.
- The `abcdef` is a hash of your user account with the `mailKey`.
Knowing this hash effectively proves that Phabricator has sent you mail about the object before, i.e. that you legitimately control the account you're sending from. Without this, anyone could send mail to any object "From" someone else, and have comments post under their username.
To generate this hash, we need a stable secret per object. (We can't use properties like the PHID because the secret has to be legitimately secret.)
Today, we store these in `mailKey` properties on the actual objects, and manually generate them. This results in tons and tons and tons of copies of this same ~10 lines of code.
Instead, just store them in the Mail application and generate them on demand. This change also anticipates possibly adding flags like "must encrypt" and "original subject", which are other "durable metadata about mail transmission" properties we may have use cases for eventually.
Test Plan:
- See next change for additional testing and context.
- Sent mail about Herald rules (next change); saw mail keys generate cleanly.
- Destroyed a Herald rule with a mail key, saw the mail properties get nuked.
- Grepped for `getMailKey()` and converted all callsites I could which aren't the copy/pasted boilerplate present in 50 places.
- Used `bin/mail receive-test --to T123` to test normal mail receipt of older-style objects and make sure that wasn't broken.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13065
Differential Revision: https://secure.phabricator.com/D19399
Summary:
Ref T13130. See PHI483. Currently, "Plan Changes + Draft" uses rules like "Plan Changes", not rules like "Draft", and allows "Accept".
This isn't consistent with how "Draft" and "Accept" work in other cases. Make "Plan Changes + Draft" more like "Draft" for consistency.
Also fix a string that didn't have a natural English version.
Test Plan:
- Added a failing build plan.
- Created a revision.
- Loaded the revision before builds completed, saw a nicer piece of text about "waiting for builds" instead of "waiting for 2 build(s)".
- Builds failed, which automatically demoted the reivsion to "Changes Planned + Draft".
- As the author and as a reviewer, verified all the actions available to me made sense (particularly, no "Accept").
- Abandoned the revision to test "Abandoned + Draft".
- As the author and as a reviewer, verified all the actions available to me made sense.
- Reclaimed the revision, then used "Request Review" to send it to "Needs Review". Verified that actions made sense and, e.g., reviewers could now "Accept" normally.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130
Differential Revision: https://secure.phabricator.com/D19398
Summary:
See D19394. Currently, during first-time setup before you configure "phabricator.base-uri", we may attempt to generate a setup page, try to generate a CSP header for it, and fail to access the environmental config. This causes a too-severe error page ("configure phabricator.base-uri") instead of preflight guidance (like "can't connect to MySQL").
Instead, treat this more like "security.alternate-file-domain" and just bail on CSP if we can't fetch it.
Test Plan: On a fresh (non-explodey laptop) install with critical setup errors (no MySQL installed yet), loaded Phabricator. Before: error about phabricator.base-uri. After: more helpful guidance about installing/configuring MySQL.
Reviewers: amckinley, avivey
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19396
Summary: Depends on D19391. Ref T13126. See that task for some details on what's going on here.
Test Plan:
- Viewed a file which includes lines that were added during the first commit to the repository.
- Before D19391: fatal.
- After D19391: blank.
- After this patch: accurate blame information.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13126
Differential Revision: https://secure.phabricator.com/D19392
Summary:
Ref T13126. When you view a file using the new document engine view and some lines were introduced in the initial commit to the repository, Git renders "^abc123" in the blame output.
We currently don't do anything about this, and later fail to look it up and fatal.
It's also unlikely-but-conceivably-possible to end up here if a commit has not imported yet or has been nuked with `bin/remove destroy`.
Let the whole thing run without fataling even if a `$commit` is missing. Future refinements could improve this behavior.
Test Plan: Viewed a file with lines introduced in the initial commit, got empty blame instead of a fatal.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13126
Differential Revision: https://secure.phabricator.com/D19391
Summary:
Ref T13124. See PHI584. When you create a draft revision and it automatically demotes to "Changes Planned + Draft" because builds fail, let it promote to "Needs Review" automatically if builds pass. Usually, this will be because someone restarted the builds and they worked the second time.
Although I'm a little wary about adding even more state transitions to the diagram in T13110#237736, I think this one is reasonably natural and not ambiguous.
Test Plan:
- Created a failing build plan with a "Throw Exception" step.
- Created a revision which hit the build plan, saw it demote to "Changes Planned" when Harbormaster failed.
- Edited the build plan to remove the "Throw Exception" step, restarted the build, got a pass.
- Saw revision promote again:
{F5526104}
I didn't exhaustively test that the other 40 state transitions still work properly, but I think the scope of this change is small enough that it's unlikely I did much collateral damage.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13124
Differential Revision: https://secure.phabricator.com/D19380
Summary: See discussion in D19379. The 4-tuple of (device, network, address, port) should be unique.
Test Plan: Created lots of duplicate interfaces, bound those interfaces to various services, observed migration script clean things up correctly.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19388
Summary:
Ref T13124. See PHI593.
When you `arc diff` in a Git or Mercurial repository, we upload some information about the local commits in your working copy which the change was generated from.
In the future (for example, with T1508) we may increase the prominence of this feature.
Provide a stable way to read this information back via the API. This roughly mirrors the information we provide about commits in "diffusion.commit.search", although the latter is less fleshed-out today.
Test Plan: Used `differential.diff.search` to retrieve commit information about Git, Mercurial, and Subversion diffs. (There's no info for Subversion, but it doesn't crash or anything.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13124
Differential Revision: https://secure.phabricator.com/D19386
Summary:
Ref T13127. Users with red/green colorblindness may have difficulty using this element in its current incarnation.
We could give it different behavior if the "Accessibility" option is set for red/green colorblind users, but try a one-size-fits-all approach since the red/green aren't wholly clear anwyay.
Test Plan: {F5530050}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13127
Differential Revision: https://secure.phabricator.com/D19385
Summary:
Ref T13124. Ref T13131. Fixes T8953. See PHI512.
When you receieve a notification about an object and then someone hides that object from you (or deletes it), you get a phantom notification which is very difficult to clear.
For now, test that notifications are visible when you open the menu and clear any that are not.
This could be a little more elegant than it is, but the current behavior is very clearly broken. This unbreaks it, at least.
Test Plan:
- As Alice, configured task stuff to notify me (instead of sending email).
- As Bailey, added Alice as a subscriber to a task, then commented on it.
- As Alice, loaded home and saw a notification count. Didn't click it yet.
- As Bailey, set the task to private.
- As Alice, clicked the notification bell menu icon.
- Before change: no unread notifications, bell menu is semi-stuck in a phantom state which you can't clear.
- After change: bad notifications automatically cleared.
{F5530005}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13131, T13124, T8953
Differential Revision: https://secure.phabricator.com/D19384
Summary: Fixes T13129. This at least makes the existing UI work again before we banish Phlux to the shadow realm.
Test Plan: Edited the visibility for a Phlux variable, didn't get an error. Nothing showed up in the edge tables when I made those changes, but at least it doesn't error out anymore.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13129
Differential Revision: https://secure.phabricator.com/D19387
Summary:
The name of networks should be unique.
Also adds support for exact-name queries for AlamanacNetworks.
Test Plan: Applied migration with existing duplicates, saw networks renamed, attempted to add duplicates, got a nice error message.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19379
Summary:
Ref T13124. See PHI531. When a revision is updated, builds against the older diff tend to stop being relevant. Add an option to abort outstanding older builds automatically.
At least for now, I'm adding this as a build step instead of some kind of special checkbox. An alternate implementation would be some kind of "Edit Options" action on plans with a checkbox like `[X] When this build starts, abort older builds.`
I think adding it as a build step is a bit simpler, and likely to lead to greater consistency and flexibility down the road, make it easier to add options, etc., and since we don't really have any other current use cases for "a bunch of checkboxes". This might change eventually if we add a bunch of checkboxes for some other reason.
The actual step activates //before// the build queues, so it doesn't need to wait in queue before it can actually act. T13088 discusses some plans here if this sticks.
Test Plan:
- Created a "Sleep for 120 seconds" build plan and triggered it with Herald.
- Added an "Abort Older Builds" step.
- Updated a revision several times in a row, saw older builds abort.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13124
Differential Revision: https://secure.phabricator.com/D19376
Summary:
Depends on D19377. Ref T13125. Ref T13124. Ref T13105. Coverage reporting in Diffusion didn't initially survive the transition to Document Engine; restore it.
This adds some tentative/theoretical support for multiple columns of coverage, but no way to actually produce them in the UI. For now, the labels, codes, and colors are hard coded.
Test Plan:
Added coverage with `diffusion.updatecoverage`, saw coverage in the UI:
{F5525542}
Hovered over coverage, got labels and highlighting.
Double-checked labels for "N" (Not Executable) and "U" (Uncovered). See PHI577.
Faked some multi-column coverage, but you can't currently get this yourself today:
{F5525544}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13125, T13124, T13105
Differential Revision: https://secure.phabricator.com/D19378
Summary:
Depends on D19372. Ref T13124. See PHI505. Currently, if you `!history` a task with a lot of comments, you get output like this:
> alice added a comment.
> bailey added a comment.
> alice added a comment.
> alice added a comment.
>
> AAAA
>
> BBBB
>
> AAAA
>
> AAAA
This is impossible to read. Put the "alice added a comment." headers above the actual comments for comments after the first.
These types of mail messages are unusual, but occur in several cases:
- The new `!history` command.
- Multiple comments on a draft revision before it promotes out of draft.
- (Probably?) Conduit API updates which submit multiple comment transactions for some reason.
Test Plan: Used `bin/mail receive-test` to send a `!history` command to a task, saw a much more readable rendering of the transaction log in the resulting email.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13124
Differential Revision: https://secure.phabricator.com/D19373
Summary:
See PHI505. Ref T13124. If you're an agent of a hostile state trying to exfiltrate corporate secrets, you might find yourself foiled if Phabricator is secured behind a VPN.
To assist users in this situation, provide a "!history" command which will dump the entire history of an object in a nice text format and get through the troublesome VPN.
Some issues with this:
- You currently get all the "X added a comment." up top, and then all the comments below. This isn't terribly useful.
- This goes through the "Must Encrypt" flag, but possibly should not? (On the other hand, this is a pretty willful way to bypass it the flag.)
Test Plan: Used `bin/mail receive-test ...` to send `!history` commands, got somewhat-useful response mail.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13124
Differential Revision: https://secure.phabricator.com/D19372
Summary:
Depends on D19370. See T13124. See PHI549. The particular install in PHI549 migrated a large amount of data via the fallback hunk migration script, which does not compress hunks.
Add a mode to `bin/differential migrate-hunk` that amounts to "compress all the hunks which would benefit from compression".
Test Plan: Ran `bin/differential migrate-hunk` with `--auto`, `--all`, `--to`, `--id`, and `--dry-run` in various mixtures. Forced a bunch of hunks to raw ("byte") format, saw it cleanly upgrade them to compressed ("gzde") format.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19371
Summary:
Depends on D19369. Ref T13120. Add a flag to migrate every hunk.
This isn't terribly useful on its own, but I'm going to add an `--auto` flag next so that you can run `--auto --all` to migrate hunks to the preferred hunk format.
Test Plan: Ran `bin/differential migrate-hunk --all --to text`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120
Differential Revision: https://secure.phabricator.com/D19370
Summary: This is a good spelling, but maybe a better spelling is possible.
Test Plan: hmmm
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19369
Summary: Ref T13076. This will be used by the metric collection system to iterate over the cluster devices.
Test Plan: Created some cluster and non-cluster devices, searched and saw expected results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T13076
Differential Revision: https://secure.phabricator.com/D19368
Summary:
Ref T13120. See PHI571. Fixes T5024. This adds a "View as Query" action to workboard columns, which builds a query in Maniphest that has the current query constraints plus an additional constraint to select only tasks in the specified column.
This is a normal query and can be turned into a dashboard panel, added to a menu, edited, saved as a link, etc.
Much of the complexity here is that finding tasks in a given column isn't entirely straightforward because of how board layout works: when you create a task, it isn't immediately placed in columns. It's only actually added to the "Backlog" column on any boards when someone looks at the board.
To get the right behavior, we must do "board layout" for any queried columns before we can constrain results. This isn't enormously efficient, but should be OK for reasonable boards.
Test Plan:
- Used "View as Query" for normal columns and milestome columns, got appropriate queries in Maniphest.
- Applied filters to the board (e.g., "Priorities: wishlist"), then used "View As Query" and had my custom filters respected.
- Queried some large boards/columns with more than a thousand tasks, got results back within a second or so.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T5024
Differential Revision: https://secure.phabricator.com/D19366
Summary:
See PHI565. Ref T13120. Although this older log is on the chopping block (see T13088), there's some migration guidance and other complexity around just replacing it.
Until it gets replaced, make clicking the "number of lines" elements respect the current "Build Generation" setting. Prior to this change, clicking the links would lose the generation information and jump you to the most recent build generation.
Also fix some collateral damage from T13105 where we ended up with white text on a white background in some cases.
Test Plan:
- Restarted a build to get multiple generations.
- On each generation, clicked the various "25", "50", etc., links.
- Saw generation and log window sizes both respected by the links.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13120
Differential Revision: https://secure.phabricator.com/D19367
Summary:
Depends on D19356. Fixes T10883. Ref T13120.
- Add a "writable" property to the bindings, defaulting to "true" with a nice dropdown.
- When selecting hosts, allow callers to request a writable host.
- If the caller wants a writable host, only return hosts if they're writable.
- In SVN and Mercurial, we sometimes return only writable hosts when we //could// return read-only hosts, but figuring out if these request are read-only or read-write is currently tricky. Since these repositories can't really cluster yet, this shouldn't matter too much today.
Test Plan:
- Without any config changes, viewed repositories via web UI and pushed/pulled via SSH and HTTP.
- Made all nodes in the cluster read-only by disabling "writable", pulled and hit the web UI (worked), tried to push via SSH and HTTP (got errors about read-only).
- Put everything back, pulled and pushed.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T10883
Differential Revision: https://secure.phabricator.com/D19357
Summary:
Depends on D19355. Ref T10883. Ref T13120. Rather than adding a million parameters here, wrap the selector-parameters in an `$options`.
The next change adds a new "writable" option to support forcing selection of writable hosts.
Test Plan: Pulled and pushed via HTTP and SSH, viewed repositories via Diffusion.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T10883
Differential Revision: https://secure.phabricator.com/D19356
Summary:
Ref T10883. Ref T13120. There's an existing "closed" property on repository services that stops new repositories from being allocated there.
Turn it into a nice boolean.
Test Plan: Toggled the value on/off using a nice `<select />` with helpful labels instead of a text area.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T10883
Differential Revision: https://secure.phabricator.com/D19355
Summary:
See PHI573. Ref T13120. Drafts were recently changed so that "draft" and "broadcast" are separate flags, and you can have non-broadcasting revisions in states other than "draft" if builds fail on a draft or you abandon a draft.
However, when draft mode is entered with `arc diff --draft` and you have prototypes off, this flag wasn't being set correctly.
Test Plan: Disabled prototypes, created a revision with `arc diff --draft`, observed that `draft.broadcast` is now correctly `false`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120
Differential Revision: https://secure.phabricator.com/D19360
Summary:
See PHI574. Ref T13120. When you `Ref Txx` or `Fixes Txxx`, we mark it "unmentionable" to prevent the task from generating both a reference and a mention.
If you add a reference to an object (like a commit hash) to a custom remarkup field, there's currently no real way to prevent it from generating a mention, except that you can explicitly mark the PHID as unmentionable on the Editor.
This isn't exactly a first-class feature, but we technically do it in `PhabricatorRepositoryCommitMessageParserWorker`, and it probably doesn't hurt or interfere with anything to support it slightly better.
In Differential, respect any existing value and append new values to it rather than overwriting the value.
Test Plan: Edited a revision summary to include `Ref Txxx`, saw only a reference (not a mention) generate.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120
Differential Revision: https://secure.phabricator.com/D19361
Summary:
Depends on D19349. Ref T13105. This was the behavior in Diffusion before with a little hard-coded snippet.
Remove that snippet ("diffusion-jump-to") and add a more general-purpose snippet to SourceView.
This is a tiny bit hacky still (and probably doesn't work quite right with Quicksand) but gets things working again and works in all of Files, Paste, and Diffusion.
Test Plan: Followed links to particular lines in Paste, Files and Diffusion; got scrolled to the right place.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19350
Summary:
Depends on D19348. Ref T13105. When copying text from Paste or Diffusion, we'd like to copy only source, not line numbers.
We currently accomplish this with zero-width spaces plus a trigger that fires on "copy" in Paste and Diffusion. This is quite gross.
In the new-style Harbormaster logs, we use an approach that seems slightly better: CSS psuedoelements.
This isn't a complete solution (see also PHI504 / T5032) but puts us in a slightly better place.
Use it in Paste/Files/Diffusion too.
This gives us good behavior in all browsers in Files and Paste.
This gives us good behavior in Chrome and Firefox in Diffusion. Safari will copy (but not visually select) blame information in Diffusion. I think we can live with that for now.
Test Plan: Selected and copy/pasted stuff in Diffusion, Files, and Paste. Got good behavior everywhere except Safari + Diffusion.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19349
Summary:
Depends on D19342. Ref T12414. Ref T13120. This adds an EditEngine extension for editing Almanac properties.
The actual wire format is a little weird. Normally, we'd have a transaction for each property, but since you can pick any property names you want we can't really do that (we'd have to generate infinite transactions).
The transaction wire format anticipates that transactions may eventually get some kind of metadata -- each transaction looks like this:
```
{
"type": "title",
"value": "Example title"
}
```
...and we can add more keys there. For example, I could have made this transaction look like this:
```
{
"type": "property.set",
"almanac.property.key": "some-key",
"value": "some-value"
}
```
However, I don't want to just accept any possible key freely, and it might be a decent chunk of work to formalize this better. It also doesn't feel great.
I just built special transaction types intead, so you:
```
{
"type": "property.set",
"value": {
"some-key": "some-value",
...
}
}
```
Internally, we may generate more than one transaction as a result (if the "value" has more than one key).
This feels a bit more natural and is probably easier for clients to use anyway.
Test Plan: Set and deleted Service, Device and Binding properties via the API.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19343
Summary:
Depends on D19341. Ref T12414. Ref T13120.
- Fix a bug where default-valued properties didn't get rendered in grey as they're supposed to (as a hint that the value isn't customized).
- When resetting a builtin property won't do anything, visually disable the button as a hint.
- Allow Services to specify properties on their Bindings.
- Specify that repository bindings have a "protocol" property, so it becomes an explicit thing in the UI. Previously, you had to read the documentation to figure this out.
- When editing bindings, use the EditField and its configuration if possible. This turns the "Protocol" property into a dropdown in the UI where you select between "http", "https" and "ssh".
- Give the "protocol" binding a smart default based on the port number of the corresponding interface.
Test Plan:
- Viewed properties on Services, Devices and Bindings.
- Saw them render sensibly, and grey out + grey button when a builtin value has a default setting.
- Saw "Protocol" appear as a default property on repository cluster bindings and get a smart value.
- Edited "protocol", got a nice dropdown.
{F5518791}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19342
Summary:
Depends on D19340. Ref T12414. Ref T13120. See T12414 for some discussion about direction here.
Since I think retaining "enabled/disabled" as a simple flag is reasonable, expose it via the API for readers and writers.
Also expose binding properties.
Test Plan:
- Searched for bindings and properties with "alamanc.binding.search".
- Enabled and disabled bindings with "almanac.binding.edit".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19341
Summary:
Depends on D19338. Ref T13120. Ref T12414. These are the last of the new API methods.
This stuff still doesn't work:
- You can't actually enable/disable bindings yet. I want to take a look at the use cases and consider changing "disabled" to "status", or providing a different way to solve the problem.
- You can't edit properties via the API. I expect to enable this for all `AlmanacPropertyInterface` objects with an extension in a future change.
Test Plan:
- Searched for bindings via API.
- Viewed binding web UI for API methods.
- Created bindings via API.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19340
Summary: Depends on D19337. Ref T13120. Ref T12414. These are slightly more substantive than namespace/network, but pretty much standard fare.
Test Plan:
- Searched for interfaces with "almanac.interface.search".
- Created and edited interfaces with "almanac.interface.edit".
- Created and edited interfaces with web UI since some stuff got tweaked.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19338
Summary: Depends on D19336. Ref T13120. Ref T12414. These are simple, straightforward, and uninteresting.
Test Plan:
- Searched for namespaces with "almanac.namespace.search".
- Created and edited namespaces with "almanac.namespace.edit".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19337
Summary: Depends on D19335. Ref T13120. Ref T12414. There are many good ways to spell "almanac", but stick with convention here.
Test Plan: (O_O)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19336
Summary: Depends on D19334. Ref T13120. Ref T12414. These are pretty straightforward, but no one really has a use case for them anyway today so they're primarily just for completeness.
Test Plan:
- Queried networks with `almanac.network.search`.
- Created and edited networks with `almanac.network.edit`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19335
Summary:
Depends on D19329. Ref T13120. Ref T12414. Recent changes have mostly modularized Almanac transactions, but the "property" transactions remained written in an older style with the logic on the Editor/Transaction classes.
This moves them to modern modular transactions. These end up being a little bit copy-pastey, but it doesn't feel too terribly bad.
Test Plan: Created, edited, and deleted properties on services, devices and bindings. Grepped for removed constants.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19334
Summary:
Depends on D19328. Ref T13120. Ref T12414.
Prior work has left us with just a NAME transaction here, which is straightforward to modularize.
Test Plan:
- Created and renamed devices.
- Tried to set no name, a bad name, a duplicate name (got errors).
- Tried to create/rename into a namespace I could not edit (got an error).
- Grepped for `AlmanacDeviceTransaction::`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19329
Summary:
Depends on D19325. Ref T13120. Ref T12414.
This no longer has any callers in the upstream or in Phacility support libraries, so get rid of it.
This will make modularizing Device transactions significantly easier, since the other transactions are reasonable, normal sorts of transactions.
For existing devices, this leaves some "author edited this object." transactions in the log. I might just leave those since they aren't really hurting anything, or maybe I'll clean them up or hide them later once I have more confidence that these changes are stable.
Test Plan: Grepped for `TYPE_INTERFACE` and `AlmanacDeviceTransaction`, found no callsites.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19328
Summary:
Depends on D19324. Ref T13120. Ref T12414.
This moves "Destroy Interface" to use Interface transactions instead of Device transactions, so we can ultimately get rid of the complex and difficult-to-modernize `AlmanacDeviceTransaction::TYPE_INTERFACE`.
This transaction is a bit weird since it makes the interface delete itself, but this should work OK for now. At some point in the future I'd probably want to change this into more of a "disable" action, but I don't think we face any immediate peril by retaining this behavior for now.
Test Plan:
- Destroyed interfaces on devices using the web UI, saw them vanish.
- Ran daemons, nothing fataled/exploded even though the transaction is weird and destroys the object it affects.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19325
Summary:
Depends on D19323. Ref T13120. Ref T12414.
Move editing to modern stuff and fix some implementation errors from D19323 (mostly copy/paste stuff).
Test Plan:
- Created and edited interfaces.
- Tried to create/edit an interface with a bogus/empty address/port, got errors.
- Tried to create an interface on a bogus device, got an error.
- Tried to create an interface on a device I could not edit, got an error.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19324
Summary:
Depends on D19322. Ref T13120. Ref T12414.
Currently, `AlmanacDevice` has a bit of a beast of a `TYPE_INTERFACE` transaction that fully creates a complex Interface object. This isn't very flexible or consistent, and Interfaces are complex enough to reasonably have their own object behaviors (for example, they have their own PHIDs).
The complexity of this transaction makes modularizing `AlmanacDevice` transactions tricky. To simplify this, move Interface toward having its own set of normal transactions.
This change just adds some reasonable-looking transactions; it doesn't actually hook them up in the UI or make them reachable. I'll test that they actually work as I swap the UI over.
We may also have some code using the `TYPE_INTERFACE` transaction in Phacility support stuff, so that may need to wait a week to actually phase out.
Test Plan: Ran `bin/storage upgrade` and `arc liberate`. This code isn't reachable yet.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19323
Summary: Depends on D19321. Ref T13120. Ref T12414. Move transactions for Almanac Networks (just "name") to ModularTransactions.
Test Plan:
- Created a new network.
- Renamed a network.
- Tried to create a network with no name (got an error).
- Grepped for `AlmanacNetworkTransaction::`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19322
Summary: Depends on D19320. Ref T13120. Ref T12414. Move transactions for Almanac Bindings to ModularTransactions.
Test Plan:
- Created a new binding.
- Tried to create a duplicate binding, got an error.
- Edited a binding to rebind it to a different device.
- Disabled and enabled bindings.
- Grepped for `AlmanacBindingTransaction::` constants.
When a binding is created, it currently renders a bad "changed the interface from ??? to X" transaction. This is because creation isn't currently using EditEngine. I plan to swap it shortly, which will turn this into a real "Create" transaction and fix the issue.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19321
Summary: Depends on D19318. Ref T13120. Ref T12414. Move transactions for Almanac Namespaces ("name" is the only meaningful one) to ModularTransactions.
Test Plan:
- Created a new namespace.
- Edited a namespace.
- Tried to choose no name, an invalid name, a duplicate name, and a name in a namespace I can't edit; got appropriate errors.
- Grepped for `AlmanacNamespaceTransaction::TYPE_NAME`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19320
Summary:
Depends on D19317. Ref T13120. Ref T12414. See PHI145. See PHI473.
This adds a Conduit-only "type" transaction for Almanac services. This is very similar to the approach in D18849 for Drydock blueprints.
Test Plan:
- Tried to create an empty service via "almanac.service.edit", was told to pick a type.
- Tried to pick a bad type, was told to pick a good type.
- Created a new Almanac service via "almanac.service.edit".
- Tried to edit the service to change the type, wasn't allowed to.
- Created and edited via the web UI, nothing changed from before.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19318
Summary:
Ref T13120. Ref T12414. See PHI145. See PHI473. This partially modernizes AlmanacService transactions by moving them to ModularTransactions.
This isn't complete because the "update property" and "remove property" transactions aren't modularized. They still //work//, since the parent Editor implements them, but they no longer render properly on the timeline since the `Transaction` object no longer has rendering logic for them.
Tentatively, I'm going to try to convert the rest of the Almanac objects and then modularize those transactions. (Currently, all of Binding, Device, Namespace and Service support properties, although they can only actually be edited on Service, Device and Binding.)
If that turns out to be really tricky for some reason I can just copy/paste the timeline rendering for now, but I think it won't be too hard.
Test Plan:
- Created and edited Services.
- Tried to create a service with: a bad name, no name, a name which put it in a namespace I can't edit (got errors in all cases).
- Edited and removed properties. The edits worked, the timeline just renders a generic story now ('X edited this object (transaction type "almanac:property:update").').
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19317
Summary:
Before:
```
$ ./config set phabricator.base-uri local.phacility.com:8080
Usage Exception: Config option 'http://' is invalid. The URI must start with https://' or 'phabricator.base-uri'.
```
After:
```
$ ./config set phabricator.base-uri local.phacility.com:8080
Usage Exception: Config option 'phabricator.base-uri' is invalid. The URI must start with http://' or 'https://'.
```
Test Plan: See above
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D19330
Summary:
Depends on D19315. Ref T13120. Ref T12414. See PHI145. See PHI473. I want to move Almanac services to ModularTransactions but ran into this old piece of dead/unused code along the way.
Long ago, Almanac services could be individually "locked", but this didn't really work out very well. It was replaced by "Can Manage Cluster Services" in D15339 and prior changes, but not all of the old "Lock" code got cleaned up.
I don't expect to restore this feature, so clean it up now.
Test Plan:
- Grepped for `AlmanacServiceTransaction::TYPE_LOCK`, `TYPE_LOCK`, etc.
- Grepped for `updateServiceLock()`, no callsites.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T12414
Differential Revision: https://secure.phabricator.com/D19316
Summary:
See T13120. See T12414. See PHI145. See PHI473. Almanac services require a type before they can do anything, and EditEngine currently builds one with no type. We then fatal when trying to do mundane things like generate documentation.
Instead, build a generic but complete Service for documentation generation in the web UI. This is similar to the previous Drydock Blueprint change from D18849 (or some earlier diff in that series).
(You still probably can't use this method to //create// a service; I'll fix that in the next change.)
Test Plan:
- Viewed "almanac.service.edit" in the web UI.
- Before: immediate fatal ("No Almanac service type "" exists!").
- After: Page works. No claims about the method doing anything useful.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19315
Summary:
Depends on D19313. Ref T13105. Fixes T13015. We lost the coloration for ages in the switch to Document Engine.
Restore it, and use a wider range of colors to make the information more clear.
Test Plan: Viewed some blame, saw a nice explosion of bright colors. This is a cornerstone of good design.
Maniphest Tasks: T13105, T13015
Differential Revision: https://secure.phabricator.com/D19314
Summary:
Depends on D19312. Ref T13105. For readability, render only one link for each contiguous block of changes.
Also make the actual rendering logic a little more defensible.
Test Plan: Viewed some files with blame, saw one render per chunk instead of one per line.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19313
Summary: Depends on D19310. Ref T13105. The "meta" value was not populating correctly because this used `phutil_tag()`.
Test Plan: Will verify on `secure`.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19311
Summary: Ref T13105. This needs refinement but blame sort of works again, now.
Test Plan: Viewed files in Diffusion and Files; saw blame in Diffusion when viewing in source mode.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19309
Summary: Ref T13105. Ref T13047. This makes symbol indexes work with DocumentEngine in Files, and restores support in Diffusion.
Test Plan: Command-clicked stuff, got taken to the symbol index with reasonable metadata in Diffusion, Differential and Files.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105, T13047
Differential Revision: https://secure.phabricator.com/D19307
Summary: Ref T13105. See also T7895. When users render very large files as source via DocumentEngine, skip highlighting.
Test Plan: Fiddled with the limit, viewed files, saw highlighting degrade.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19306
Summary:
Ref T13105. Fixes some issues with line linking and highlighting under DocumentEngine:
- Adding `$1-3` to the URI didn't work correctly with query parameters.
- Reading `$1-3` from the URI didn't work correctly because Diffusion parses them slightly abnormally.
Test Plan: Clicked/dragged lines to select them. Observed URI. Reloaded page, got the right selection.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19305
Summary:
Ref T13105. This breaks about 9,000 features but moves Diffusion to DocumentEngine for rendering. See T13105 for a more complete list of all the broken stuff.
But you can't bake a software without breaking all the features every time you make a change, right?
Test Plan: Viewed various files in Diffusion, used DocumentEngine features like highlighting and rendering engine selection.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Subscribers: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19302
Summary:
Ref T13105. This separates document rendering from the Controllers which trigger it so it can be reused elsewhere (notably, in Diffusion).
This shouldn't cause any application behavior to change, it just pulls the rendering logic out so it can be reused elsewhere.
Test Plan: Viewed various types of files in Files; toggled rendering, highlighting, and encoding.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19301
Summary: Ref T13105. Given that we now load blame with AJAX, it's not clear that there's any benefit to disabling it. This would also interact oddly with the document engine.
Test Plan: Viewed files in Diffusion, no longer saw blame-related options.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19300
Summary: This reverts D18524. See that revision for discussion.
Test Plan: Viewed home menu, saw application names as menu items.
Differential Revision: https://secure.phabricator.com/D19308
Summary: Fixes T13119. Ref T13120. This isn't the world's most elegant patch, but restores the debugging version of this view to service.
Test Plan: Viewed debugging phage (at `/typeahead/class/`). Used the actual proxy (by changing a datasource custom field from the comment area).
Maniphest Tasks: T13120, T13119
Differential Revision: https://secure.phabricator.com/D19304
Summary:
Depends on D19296. Ref T13110.
- Remove the "Large Changesets" documentation since we now degrade very large changesets and I don't have any evidence that anyone has ever tried to follow any of the recommendations in this document.
- Remove references to it.
- When an older revision doesn't have denormalized size information on the Revision object itself, don't render a scale element (instead of rendering a bogus one).
- Try to improve terminology consistency around "Large Change" (100-1000 files) vs "Very Large Change" (1000+ files) vs "Enormous Change" (too large to hold in memory).
Test Plan: Viewed revisions; grepped for documentation.
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19298
Summary: Depends on D19295. Ref T13110. Degrade the review UX when users try to interact with changes which are too large to receive human review.
Test Plan: Reduced the "very large" limit, browsed some changes, saw various elements degrade.
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19296
Summary: Ref T13110. Installs have various reasons for sending unreviewable changes (changes where the text of the change will never be reviewed by a human) through Differential anyway. Prepare for accommodating this more gracefully by building a standalone changeset list page which paginates the changesets.
Test Plan: Clicked the new "Changeset List" button on a revision, was taken to a separate page.
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19295
Summary: Ref T13110. See PHI230. Show revision sizes on a roughly logarithmic scale from 1-7 stars. See D16322 for theorycrafting on this element.
Test Plan: Looked at some revisions, saw plausible-looking size markers.
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19294
Summary:
See PHI489. Ref T13110. At least for now, this just shows "..." at the end since you can click the revision to see the whole list anyway.
Also remove the older-style external Handle passing in favor of lazy construction via HandlePool.
Test Plan: Viewed revisions, fiddled with the 7 limit, got sensible-seeming "..." behavior.
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19293
Summary: Depends on D19290. Ref T13110. Differential still has some hacks in place which require these methods to "very temporarily" be nonfinal, but the badness can be slightly reduced nowadays.
Test Plan: Loaded some pages, nothing fataled.
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19291
Summary: Depends on D19289. Ref T13110. This flag has been obsolete for some time and has no callers.
Test Plan: Grepped for `hasReviewTransaction`, no hits.
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19290
Summary:
Depends on D19288. Ref T13110. In addition to kicking revisions back to "Changes Planned" when builds fail, notify the author that they need to fix their awful garbage change.
(The actual email could be more useful than it currently is.)
Test Plan: Created a revision with failing remote builds, saw email about the problem generate.
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19289
Summary: Depends on D19287. Ref T13110. Currently, "Abandon" and then "Reclaim" moves you out of "Draft" without setting the "Should Broadcast" flag. Keep these revisions in draft instead.
Test Plan: Reclaimed an abandoned + draft revision, got a draft revision instead of a "needs review + nonbroadcast" revision (which isn't a meaningful state).
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19288
Summary:
Depends on D19286. Ref T13110. After builds fail remote builds, put revisions back in the author's queue.
This doesn't actually notify the author quite yet.
Test Plan: Made a failing build plan run on revisions, created a revision, saw it demote after builds failed.
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19287
Summary: Depends on D19285. Ref T13110. When you update an "Abandoned + But, Never Promoted" revision or (in the future) a "Changes Planned + But, Never Promoted" revision, return it to the "Draft" state rather than promoting it.
Test Plan: Updated an "Abandoned + Draft" revision, saw it return to "Draft".
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19286
Summary:
Depends on D19284. Ref T13110. It's now possible to get a revision into a "Abandoned + But, Never Promoted From Draft" state. Show this in the header and provide the draft hint above the comment area.
Also, remove `shouldBroadcast()`. The method `getShouldBroadcast()` now has the same meaning.
Finally, migrate existing drafts to `shouldBroadcast = false` and default `shouldBroadcast` to `true`. If we don't do this, every older revision becomes a non-broadcasting revision because this flag was not explicitly set on revision creation before, only on promotion out of draft.
Test Plan: Ran migration; abandoned draft revisions and ended up in a draft + abandoned state.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19285
Summary:
Depends on D19283. Ref T13110. To enable "Changes Planned + But, Still A Draft" and "Abandoned + But, Never Promoted From Draft" states, decouple the "broadcast" flag from the "draft" state.
Broadcast behavior is now based only on the `shouldBroadcast` flag, and revisions in any state may have this flag.
Revisions gain this flag when created as a non-draft, or when they leave the draft state for the first time.
There are probably still some ways you can get the wrong result here -- maybe abandon + update -- but those can be cleaned up as they arise.
Test Plan: Kinda poked it a bit but I'll vet this more heavily at the end of this sequence.
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19284
Summary:
Depends on D19282. Ref T13110. I want to introduce "Changes Planned + Still A Draft" and "Abandoned + Still A Draft" states, at a minimum.
I think the "hasBroadcast" flag is effectively identical to a hypothetical "stillADraft" flag, so rename it to "shouldBroadcast" to better match its intended behavior.
This just changes labels, not any behavior.
Test Plan: Grepped for `hasBroadcast` and `HAS_BROADCAST`.
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19283
Summary:
Depends on D19281. This increases consistency between build timeline publishing and revision draft promotion.
There's no real behavioral change here (switching how publishing worked already changed the beahvior) but this sends more callsites down the same code paths.
Since the builds we're looking at include completed builds, change the term "active" to "impactful". This describes the same set of builds, but hopefully describes them more accurately.
Test Plan: Created a local revision, saw it plausibly interact with draft status and promote. There are a lot of moving parts here and some stuff may well have slipped through.
Differential Revision: https://secure.phabricator.com/D19282
Summary:
Depends on D19280. Ref T13110. Although Harbormaster cares about all builds, Differential does not practically care about local lint and unit results in determining build status.
In Differential, orient publishing around "remote builds" instead of "builds".
This does not yet change any of the draft logic, it just makes the timeline story use newer logic.
Test Plan: Used `bin/harbormaster publish` (with some guard-clause removal) to publish some buildables to revisions without anything crashing.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19281
Summary:
Depends on D19279. Ref T13110. This implements the existing publishing logic for buildables, but does so via ModularTransactions instead of a core transaction type.
Since each application is implementing build transactions independently, this removes the core type.
Next, Differential will get a similar treatment.
Test Plan: Used `bin/harbormaster publish` (with some commenting-out-guard-clauses) to publish a commit Buildable; saw unchanged feed behavior.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19280
Summary:
Depends on D19278. Ref T13110. This moves most of the structural logic for publishing builds to BuildableEngine and provides a `bin/harbormaster publish` to make publishing easy to retry/debug.
This intentionally removes the bit which actually does anything when builds publish. Followup changes will implement application-specific versions of the publishing logic in Differential and Diffusion.
Test Plan: Ran `bin/harbormaster publish Bxxx`, saw it do nothing (but not crash).
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19279
Summary:
Ref T13110. Currently, build status is published the same way for every Buildable by the BuildEngine.
I want to change this to delegate publishing to each Buildable, particularly so that Differential may use more detailed rules for handling builds and drafts.
Rather than add additional methods to the existing `BuildableInterface`, add an engine generator method instead. This is a pattern which has seen more use recently (e.g., in Ferret) and lets us pay a little more upfront to pull complex pieces of logic out of the main class and let them use inheritence more easily. If we had Traits that might cover this to some degree.
I'd expect to eventually reduce the size of `BuildableInterface` and move the `CircleCI` and `BuildKite` interfaces so that the `BuildableEngine` implements them instead of the main object.
Here, this new engine does nothing and is never instantiated. In upcoming changes, publishing logic will move into it so that Differential can handle publishing differently.
Test Plan: Ran `arc liberate`, loaded pages, grepped for `BuildableInterface`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19278
Summary: Ref T13116. See PHI526. Currently, the YouTube remarkup rule writes an `<iframe ...>` but does not adjust the Content-Security-Policy appropriately.
Test Plan: Pasted a YouTube link; viewed it in Safari, Chrome and Firefox.
Maniphest Tasks: T13116
Differential Revision: https://secure.phabricator.com/D19277
Summary: Depends on D19273. Ref T13105. Adds "Change Text Encoding..." and "Highlight As..." options when rendering documents, and makes an effort to automatically detect and handle text encoding.
Test Plan:
- Uploaded a Shift-JIS file, saw it auto-detect as Shift-JIS.
- Converted files between encodings.
- Highlighted various things as "Rainbow", etc.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19274
Summary:
Ref T13105. This is silly, but "py" and "python" end up in different places today, and "py" is ~100x faster than "python".
See also T3626 for longer-term plans on this.
Test Plan: Reloaded a Jupyter notebook, saw it render almost instantly instead of taking a few seconds.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19273
Summary:
Ref T13114. See PHI514. This makes some attempt to undo the damage caused by incorrectly publishing a repository.
Don't run this.
Test Plan: Yikes.
Maniphest Tasks: T13114
Differential Revision: https://secure.phabricator.com/D19271
Summary:
Ref T13114. See PHI519. An install is interested in modifying a tokenizer custom field from the comment area. Provide this capability.
This patch is fairly narrow but should solve the immediate need.
Test Plan: Added, removed, and modified a tokenizer custom field using the comment action dropdown.
Maniphest Tasks: T13114
Differential Revision: https://secure.phabricator.com/D19270
Summary:
Ref T13114. See PHI511. Ref T13072. This makes Buildables, Builds, Targets and Artifacts destructible with `bin/remove destroy`.
This might not be totally exhaustive. In particular:
- File artifacts won't destroy the file. This is sort of okay because file artifacts are currently just a file reference, but probably shouldn't be how things work in the long term.
- `BuildCommand` doesn't get cleaned up, but `BuildMessage` does on `Build`. See T13072 for more.
Test Plan: Used `bin/remove destroy` to nuke a bunch of builds, buildables, etc. Loaded stuff in the web UI and it all looked like it got nuked properly.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13114, T13072
Differential Revision: https://secure.phabricator.com/D19269
Summary:
Ref T13114.
- Followup fix for D19267, which didn't work correctly with //new// revision creation.
- Followup fix for changes in T11015. Some of the querying logic was still handling "/x.y" and "/x.y/" differently. Instead, normalize consistently to "/x.y/"
Test Plan:
- Created a new revision cleanly.
- Created a package owning only a `example.txt` file and saw Differential find it as an owning package in the table of contents.
Maniphest Tasks: T13114
Differential Revision: https://secure.phabricator.com/D19268
Summary: Ref T13114. See PHI515. Updating a revision with the same, currently active diff became an error at some point (probably D19175). This is inconsistent; make it an allowable no-op instead.
Test Plan:
- Updated a revision's diff via Conduit.
- Updated to the same diff, no-op.
- Tried to update a different revision, error ("already attached elsewhere").
- Updated with a different diff.
- Tried to update with the original diff, error ("previously attached version").
Maniphest Tasks: T13114
Differential Revision: https://secure.phabricator.com/D19267
Summary: See PHI514. Ref T13114. Ref T8951. When a push is an "initial import" (a push of at least 7 commits to an empty repository) don't run Herald or enormous change protection.
Test Plan: Pushed some non-initial changes to a repository, and some initial changes.
Maniphest Tasks: T13114, T8951
Differential Revision: https://secure.phabricator.com/D19265
Summary: See PHI513. `fprintf()` takes `(thing, pattern, args, ...)` but we aren't passing a `pattern`, so if the command returns a "%" in the output we get an error.
Test Plan:
- Installed `bytes`, a great useful program which prints all the bytes, on my HoaxOS(tm) system (see D19102).
```
epriestley@orbital ~/dev/phabricator $ ./bin/drydock command --lease 76287 -- bytes # Before patch.
[2018-03-29 02:09:08] ERROR 2: fprintf(): Too few arguments at [/Users/epriestley/dev/core/lib/phabricator/src/applications/drydock/management/DrydockManagementCommandWorkflow.php:60]
arcanist(head=experimental, ref.master=b8c9c385a7f5, ref.experimental=925c60e7b837), corgi(head=master, ref.master=6371578c9d32), instances(head=master, ref.master=d983b9517924), ledger(head=master, ref.master=4da4a24b8779), libcore(), phabricator(head=hoax1, ref.master=b586ee065a75, ref.hoax1=f8d7480bbdd1, custom=4), phutil(head=master, ref.master=1ad42491e44a), secure(head=master, ref.master=988cf9bd7958), services(head=master, ref.master=6b3fb8d8dd0a)
#0 fprintf(resource, string) called at [<phabricator>/src/applications/drydock/management/DrydockManagementCommandWorkflow.php:60]
#1 DrydockManagementCommandWorkflow::execute(PhutilArgumentParser) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:441]
#2 PhutilArgumentParser::parseWorkflowsFull(array) called at [<phutil>/src/parser/argument/PhutilArgumentParser.php:333]
#3 PhutilArgumentParser::parseWorkflows(array) called at [<phabricator>/scripts/drydock/drydock_control.php:21]
epriestley@orbital ~/dev/phabricator $ ./bin/drydock command --lease 76287 -- bytes # After patch.
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
```
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19264
Summary: Ref T13114. See PHI510. Firing Herald on mentioned objects tends to feel arbitrary and can substantially slow down edits which mention many objects.
Test Plan: Mentioned tasks on other tasks; verified that the normal path is hit normally, the new Herald-free path is hit on the mentioned object, and both still work fine and show up in the timeline.
Maniphest Tasks: T13114
Differential Revision: https://secure.phabricator.com/D19263
Summary: Depends on D19259. Ref T13105. Some examples represent image data as `["da", "ta"]` while others represent it as `"data"`. Accept either.
Test Plan: Rendered example notebooks with both kinds of images.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19260
Summary: Ref T13105. Currently, logged-out users can't render documents via the endpoint even if they otherwise have access to the file.
Test Plan: Viewed a file as a logged-out user and re-rendered it via Ajax.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19258
Summary:
Ref T13105. This adds various small client-side improvements to document rendering.
- In the menu, show which renderer is in use.
- Make linking to lines work.
- Make URIs persist information about which rendering engine is in use.
- Improve the UI feedback for transitions between document types.
- Load slower documents asynchronously by default.
- Discard irrelevant requests if you spam the view menu.
Test Plan: Loaded files, linked to lines, swapped between modes, copy/pasted URLs.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19256
Summary: Depends on D19254. This engine just formats JSON files in a nicer, more readable way.
Test Plan: Looked at some JSON files, saw them become formatted nicely.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Differential Revision: https://secure.phabricator.com/D19255
Summary: Ref T13105. Allow normal text files to be rendered as documents, and add a "source code" rendering engine.
Test Plan: Viewed some source code.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19254
Summary:
Depends on D19252. Ref T13105. This very roughly renders Jupyter notebooks.
It's probably better than showing the raw JSON, but not by much.
Test Plan:
- Viewed various notebooks with various cell types, including markdown, code, stdout, stderr, images, HTML, and Javascript.
- HTML and Javascript are not live-fired since they're wildly dangerous.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19253
Summary:
Depends on D19251. Ref T13105. This adds rendering engine support for PDFs.
It doesn't actually render them, it just renders a link which you can click to view them in a new window. This is much easier than actually rendering them inline and at least 95% as good most of the time (and probably more-than-100%-as-good some of the time).
This makes PDF a viewable MIME type by default and adds a narrow CSP exception for it. See also T13112.
Test Plan:
- Viewed PDFs in Files, got a link to view them in a new tab.
- Clicked the link in Safari, Chrome, and Firefox; got inline PDFs.
- Verified primary CSP is still `object-src 'none'` with `curl ...`.
- Interacted with the vanilla lightbox element to check that it still works.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19252