Summary: Depends on D19423. Ref T12164. Adds controllers capable of listing and editing `PhabricatorRepositoryIdentity` objects. Starts creating those objects when commits are parsed.
Test Plan: Reparsed some revisions, observed objects getting created in the database. Altered some `Identity` objects using the controllers and observed effects in the database. No attempts made to validate behavior under "challenging" author/committer strings.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12164
Differential Revision: https://secure.phabricator.com/D19429
Summary:
Ref T13142. When commits are pushed, we try to handle them on one of two pathways:
- Normal changes: we load these into memory and potentially apply Herald content rules to them.
- "Enormous" changes: we don't load these into memory and skip content rules for them.
The goal is to degrade gracefully when users push huge changes: they should work, just not support all the features.
However, some changes can slip through the cracks right now:
- If you push a lot of commits at once, we'll try to cache all of the changes smaller than 1GB in memory. This can require an arbitrarily large amount of RAM.
- We calculate sizes by just looking at the `strlen()` of the diff, but a changeset takes more RAM in PHP than the raw diff does. So even if a diff is "only" 500MB, it can take much more memory than that. On systems with relatively little memory available, this may result in OOM while processing changes that are close to the "enormous" limit.
This change makes two improvements:
- Instead of caching everything, cache only 64MB of things.
- For most pushes, this is the same, since they have less than 64MB of diffs.
- For pushes of single very large changes, this is a bit slower (more CPU) since we have to do some work twice.
- For pushes of many changes, this is slower (more CPU) since we have to do some work twice, but, critically, doesn't require unlimited memory.
- Instead of flagging changes as "enormous" at 1GB, flag them as "enormous" at 256MB.
- This reduces how much memory is required to process the largest "non-enormous" changes.
- This also gets us under Git's hard-coded 512MB "always binary" cutoff; see T13143.
- This is still completely gigantic and way larger than any normal change should be.
An additional improvement would be to try to reduce the amount of memory we need to use to hold a change in process memory. I think the other changes here alone will fix the immediate issue in PHI657, but it would be nice if the "largest non-enormous change" required only a couple gigs of RAM.
Test Plan:
- Used `ini_set('memory_limit', '1G')` to artificially limit memory to 1GB.
- Pushed a series of two commits which add two 550MB text files (Temporarily, I added a `--binary` flag to trick Git into showing real diffs for these, see T13143.)
- Got a memory limit error.
- Applied the "cache only 64MB of stuff" and "consider 256MB, not 1GB, to be enormous" changes.
- Pushed again, got properly rejected as enormous.
- Added `memory_get_usage()` calls to measure how actual memory size and reported "size" estimate compare. For these changes, saw a 639MB diff require 31,479MB of memory, i.e. a factor of about 50x. This is, uh, pretty not great.
- Allowed enormous changes, pushed again, push went through.
Reviewers: amckinley
Maniphest Tasks: T13142
Differential Revision: https://secure.phabricator.com/D19455
Summary:
Fixes T13140. See PHI660.
Recent versions of Subversion can send a `(get-file true false false )` protocol frame with extra space between "false" and "false". This is allowed by the protocol spec, but never normally happens, and we do not parse it correctly.
Instead, parse it correctly.
Test Plan:
- Added unit tests.
- Ran `svn proplist svn+ssh://.../diffusion/X/file.c` under SVN 1.10 before and after the change.
- Before: indefinite hang.
- After: completed in finite time.
Reviewers: amckinley, asherkin
Reviewed By: amckinley, asherkin
Maniphest Tasks: T13140
Differential Revision: https://secure.phabricator.com/D19451
Summary:
Ref T13137. See PHI609. An install would like to filter audit requests on a particular branch, e.g. "master".
This is difficult in the general case because we can not apply this constraint efficiently under every conceivable data shape, but we can do a reasonable job in most practical cases.
See T13137#238822 for more detailed discussion on the approach here.
This is a bit rough, but should do the job for now.
Test Plan:
- Filtered commits by various branches, e.g. "master"; "lfs". Saw correct-seeming results.
- Stubbed out the "just list everything" path to hit the `diffusion.internal.ancestors` path, saw the same correct-seeming results.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13137
Differential Revision: https://secure.phabricator.com/D19431
Summary:
See PHI604. Ref T13130. Ref T13105. There's currently no way to turn blame off in Diffusion. Add a "Hide Blame" option to the "View Options" dropdown so it can be toggled off.
Also fix a couple of bugs around this: for example, if you loaded a Jupyter notebook and then switched to "Source" view, blame would incorrectly fail to activate because the original rendering of the "stage" used an asynchronous engine so `willRenderRef()` wasn't called to populate blame.
Test Plan:
- Viewed a source file, toggled blame off/on, reloaded page to see state stick in URL.
- Viewed a Jupyter notebook, toggled to "Source" view, saw blame.
- Viewed stuff in Files (no blame UI options).
- Tried to do some invalid stuff like toggle blame on a non-blame engine (options disable properly).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13130, T13105
Differential Revision: https://secure.phabricator.com/D19414
Summary: Depends on D19391. Ref T13126. See that task for some details on what's going on here.
Test Plan:
- Viewed a file which includes lines that were added during the first commit to the repository.
- Before D19391: fatal.
- After D19391: blank.
- After this patch: accurate blame information.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13126
Differential Revision: https://secure.phabricator.com/D19392
Summary:
Ref T13126. When you view a file using the new document engine view and some lines were introduced in the initial commit to the repository, Git renders "^abc123" in the blame output.
We currently don't do anything about this, and later fail to look it up and fatal.
It's also unlikely-but-conceivably-possible to end up here if a commit has not imported yet or has been nuked with `bin/remove destroy`.
Let the whole thing run without fataling even if a `$commit` is missing. Future refinements could improve this behavior.
Test Plan: Viewed a file with lines introduced in the initial commit, got empty blame instead of a fatal.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13126
Differential Revision: https://secure.phabricator.com/D19391
Summary:
Depends on D19377. Ref T13125. Ref T13124. Ref T13105. Coverage reporting in Diffusion didn't initially survive the transition to Document Engine; restore it.
This adds some tentative/theoretical support for multiple columns of coverage, but no way to actually produce them in the UI. For now, the labels, codes, and colors are hard coded.
Test Plan:
Added coverage with `diffusion.updatecoverage`, saw coverage in the UI:
{F5525542}
Hovered over coverage, got labels and highlighting.
Double-checked labels for "N" (Not Executable) and "U" (Uncovered). See PHI577.
Faked some multi-column coverage, but you can't currently get this yourself today:
{F5525544}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13125, T13124, T13105
Differential Revision: https://secure.phabricator.com/D19378
Summary:
Depends on D19356. Fixes T10883. Ref T13120.
- Add a "writable" property to the bindings, defaulting to "true" with a nice dropdown.
- When selecting hosts, allow callers to request a writable host.
- If the caller wants a writable host, only return hosts if they're writable.
- In SVN and Mercurial, we sometimes return only writable hosts when we //could// return read-only hosts, but figuring out if these request are read-only or read-write is currently tricky. Since these repositories can't really cluster yet, this shouldn't matter too much today.
Test Plan:
- Without any config changes, viewed repositories via web UI and pushed/pulled via SSH and HTTP.
- Made all nodes in the cluster read-only by disabling "writable", pulled and hit the web UI (worked), tried to push via SSH and HTTP (got errors about read-only).
- Put everything back, pulled and pushed.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T10883
Differential Revision: https://secure.phabricator.com/D19357
Summary:
Depends on D19355. Ref T10883. Ref T13120. Rather than adding a million parameters here, wrap the selector-parameters in an `$options`.
The next change adds a new "writable" option to support forcing selection of writable hosts.
Test Plan: Pulled and pushed via HTTP and SSH, viewed repositories via Diffusion.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13120, T10883
Differential Revision: https://secure.phabricator.com/D19356
Summary:
Depends on D19313. Ref T13105. Fixes T13015. We lost the coloration for ages in the switch to Document Engine.
Restore it, and use a wider range of colors to make the information more clear.
Test Plan: Viewed some blame, saw a nice explosion of bright colors. This is a cornerstone of good design.
Maniphest Tasks: T13105, T13015
Differential Revision: https://secure.phabricator.com/D19314
Summary: Depends on D19310. Ref T13105. The "meta" value was not populating correctly because this used `phutil_tag()`.
Test Plan: Will verify on `secure`.
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19311
Summary: Ref T13105. This needs refinement but blame sort of works again, now.
Test Plan: Viewed files in Diffusion and Files; saw blame in Diffusion when viewing in source mode.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19309
Summary: Ref T13105. Ref T13047. This makes symbol indexes work with DocumentEngine in Files, and restores support in Diffusion.
Test Plan: Command-clicked stuff, got taken to the symbol index with reasonable metadata in Diffusion, Differential and Files.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105, T13047
Differential Revision: https://secure.phabricator.com/D19307
Summary:
Ref T13105. Fixes some issues with line linking and highlighting under DocumentEngine:
- Adding `$1-3` to the URI didn't work correctly with query parameters.
- Reading `$1-3` from the URI didn't work correctly because Diffusion parses them slightly abnormally.
Test Plan: Clicked/dragged lines to select them. Observed URI. Reloaded page, got the right selection.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19305
Summary:
Ref T13105. This breaks about 9,000 features but moves Diffusion to DocumentEngine for rendering. See T13105 for a more complete list of all the broken stuff.
But you can't bake a software without breaking all the features every time you make a change, right?
Test Plan: Viewed various files in Diffusion, used DocumentEngine features like highlighting and rendering engine selection.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Subscribers: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19302
Summary: Ref T13105. Given that we now load blame with AJAX, it's not clear that there's any benefit to disabling it. This would also interact oddly with the document engine.
Test Plan: Viewed files in Diffusion, no longer saw blame-related options.
Reviewers: mydeveloperday
Reviewed By: mydeveloperday
Maniphest Tasks: T13105
Differential Revision: https://secure.phabricator.com/D19300
Summary: This reverts D18524. See that revision for discussion.
Test Plan: Viewed home menu, saw application names as menu items.
Differential Revision: https://secure.phabricator.com/D19308
Summary:
See PHI489. Ref T13110. At least for now, this just shows "..." at the end since you can click the revision to see the whole list anyway.
Also remove the older-style external Handle passing in favor of lazy construction via HandlePool.
Test Plan: Viewed revisions, fiddled with the 7 limit, got sensible-seeming "..." behavior.
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19293
Summary:
Depends on D19279. Ref T13110. This implements the existing publishing logic for buildables, but does so via ModularTransactions instead of a core transaction type.
Since each application is implementing build transactions independently, this removes the core type.
Next, Differential will get a similar treatment.
Test Plan: Used `bin/harbormaster publish` (with some commenting-out-guard-clauses) to publish a commit Buildable; saw unchanged feed behavior.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19280
Summary:
Ref T13110. Currently, build status is published the same way for every Buildable by the BuildEngine.
I want to change this to delegate publishing to each Buildable, particularly so that Differential may use more detailed rules for handling builds and drafts.
Rather than add additional methods to the existing `BuildableInterface`, add an engine generator method instead. This is a pattern which has seen more use recently (e.g., in Ferret) and lets us pay a little more upfront to pull complex pieces of logic out of the main class and let them use inheritence more easily. If we had Traits that might cover this to some degree.
I'd expect to eventually reduce the size of `BuildableInterface` and move the `CircleCI` and `BuildKite` interfaces so that the `BuildableEngine` implements them instead of the main object.
Here, this new engine does nothing and is never instantiated. In upcoming changes, publishing logic will move into it so that Differential can handle publishing differently.
Test Plan: Ran `arc liberate`, loaded pages, grepped for `BuildableInterface`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13110
Differential Revision: https://secure.phabricator.com/D19278
Summary: See PHI514. Ref T13114. Ref T8951. When a push is an "initial import" (a push of at least 7 commits to an empty repository) don't run Herald or enormous change protection.
Test Plan: Pushed some non-initial changes to a repository, and some initial changes.
Maniphest Tasks: T13114, T8951
Differential Revision: https://secure.phabricator.com/D19265
Summary:
Depends on D19249. Ref T13109. Add timing information to the `PushEvent`:
- `writeWait`: Time spent waiting for a write lock.
- `readWait`: Time spent waiting for a read lock.
- `hostWait`: Roughly, total time spent on the leaf node.
The primary goal here is to see if `readWait` is meaningful in the wild. If it is, that motivates smarter routing, and the value of smarter routing can be demonstrated by looking for a reduction in read wait times.
Test Plan: Pushed some stuff, saw reasonable timing values in the table. Saw timing information in "Export Data".
Maniphest Tasks: T13109
Differential Revision: https://secure.phabricator.com/D19250
Summary:
Depends on D19247. Ref T13109. When we receive an SSH request, generate a random unique ID for the request. Then thread it down through the process tree.
The immediate goal is to let the `ssh-exec` process coordinate with `commit-hook` process and log information about read and write lock wait times. Today, there's no way for `ssh-exec` to interact with the `PushEvent`, but this is the most helpful place to store this data for users.
Test Plan: Made pushes, saw the `PushEvent` table populate with a random request ID. Exported data and saw the ID preserved in the export.
Maniphest Tasks: T13109
Differential Revision: https://secure.phabricator.com/D19249
Summary:
Ref T13109. Make it slightly more clear what the scope of the write and read locks are, and slightly more clear that we're actively acquiring locks, not just sitting around waiting.
While waiting on another writer, show who we're waiting on so you can walk over to their desk and glare at them.
Test Plan:
Added `sleep(15)` after `willWrite()`. Pushed in two windows. Saw new, more informative messages. In the second window, saw the new guidance:
> # Waiting for hector to finish writing (on device "repo1.local.phacility.net" for 11s)...
Reviewers: asherkin
Reviewed By: asherkin
Subscribers: asherkin
Maniphest Tasks: T13109
Differential Revision: https://secure.phabricator.com/D19247
Summary:
Ref T13108. See PHI364. See the task and issue for discussion.
If a `git fetch` during synchronization hangs, the whole node currently hangs. While the causes of a `git fetch` hang aren't clear, we don't expect synchronization to ever reasonably take more than 15 minutes, so add a default timeout.
Test Plan: Will deploy and observe; this is difficult to reproduce or test directly.
Maniphest Tasks: T13108
Differential Revision: https://secure.phabricator.com/D19235
Summary: Depends on D19190. Fixes T12590. Ref T13099. Replaces the barely-usable, gigantic, poorly ordered "<select />" control with a tokenizer. Attempts to fix various minor issues.
Test Plan:
- Edited paths: include/exclude paths, from different repositories, different actual paths.
- Used "Add New Path" to add rows, got repository selector prepopulated with last value.
- Used "remove".
- Used validation typeahead, got reasonable behaviors?
The error behavior if you delete the repository for a path is a little sketchy still, but roughly okay.
Maniphest Tasks: T13099, T12590
Differential Revision: https://secure.phabricator.com/D19191
Summary:
Depends on D19189. Ref T12590. The "validate" and "complete" endpoints for this UI could incorrectly return redirect responses. These aren't critical to the behavior of Owners, but they're nice to have, and shouldn't redirect.
Instead, skip the canonicalizing redirect for AJAX requests.
Test Plan: Edited Owners paths in a repository with a short name, got completion/validation again.
Maniphest Tasks: T12590
Differential Revision: https://secure.phabricator.com/D19190
Summary:
Depends on D19155. Ref T13094. Ref T4340.
We can't currently implement a strict `form-action 'self'` content security policy because some file downloads rely on a `<form />` which sometimes POSTs to the CDN domain.
Broadly, stop generating these forms. We just redirect instead, and show an interstitial confirm dialog if no CDN domain is configured. This makes the UX for installs with no CDN domain a little worse and the UX for everyone else better.
Then, implement the stricter Content-Security-Policy.
This also removes extra confirm dialogs for downloading Harbormaster build logs and data exports.
Test Plan:
- Went through the plain data export, data export with bulk jobs, ssh key generation, calendar ICS download, Diffusion data, Paste data, Harbormaster log data, and normal file data download workflows with a CDN domain.
- Went through all those workflows again without a CDN domain.
- Grepped for affected symbols (`getCDNURI()`, `getDownloadURI()`).
- Added an evil form to a page, tried to submit it, was rejected.
- Went through the ReCaptcha and Stripe flows again to see if they're submitting any forms.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13094, T4340
Differential Revision: https://secure.phabricator.com/D19156
Summary: Ref T13093. Depends on D19145. See PHI398. Previously, see D18933. This provides the current viewer to `ConduitCall` so that we don't try to use device credentials from unprivileged web hosts.
Test Plan: Evaluated the "Branches" field locally, saw an appropriate field value.
Maniphest Tasks: T13093
Differential Revision: https://secure.phabricator.com/D19146
Summary:
Ref T13093. See PHI396. These are possibly somewhat niche, but reasonable to support and consistent with the existing "Pusher's projects".
Also relabel "Pusher's projects" and "Project tags" for consistency and, hopefully, clarity.
Test Plan:
- Created new "commit" and "hook: commit content" Herald rules which run against "Author's projects" and "Committer's projects".
- Test console'd the "Commit" rules.
- Pushed through the "Hook" rule.
- In all cases, saw fields populate appropriately.
Maniphest Tasks: T13093
Differential Revision: https://secure.phabricator.com/D19145
Summary:
Ref T13090. The default width changed recently to become much wider, but the behavior on this control isn't great. Instead:
- Pick a default width somewhere between the two.
- Make the width sticky across show/hide (pressing "f" twice remembers your width instead of resetting it).
- Make the width sticky across reloads (dragging the bar, then reloading the page keeps the bar in the same place).
Test Plan:
- Without settings, loaded page: got medium-width bar.
- Dragged bar wide/narrow, toggled on/off with "f", got persistent width.
- Dragged bar wide/narrow, reloaded page, got persistent width.
- Dragged bar wide/narrow, toggled it off, reloaded page, toggled it on, got persistent width.
Maniphest Tasks: T13090
Differential Revision: https://secure.phabricator.com/D19129
Summary:
Ref T13083. Facts has a fair amount of weird hardcoding and duplication of responsibilities. Reduce this somewhat: no more hard-coded fact aggregates, no more database-driven list of available facts, etc. Generally, derive all objective truth from FactEngines. This is more similar to how most other modern applications work.
For clarity, hopefully: rename "FactSpec" to "Fact". Rename "RawFact" to "Datapoint".
Split the fairly optimistic "RawFact" table into an "IntDatapoint" table with less stuff in it, then dimension tables for the object PHIDs and key names. This is primarily aimed at reducing the row size of each datapoint. At the time I originally wrote this code we hadn't experimented much with storing similar data in multiple tables, but this is now more common and has worked well elsewhere (CustomFields, Edges, Ferret) so I don't anticipate this causing issues. If we need more complex or multidimension/multivalue tables later we can accommodate them. The queries a single table supports (like "all facts of all kinds in some time window") don't make any sense as far as I can tell and could likely be UNION ALL'd anyway.
Remove all the aggregation stuff for now, it's not really clear to me what this should look like.
Test Plan: Ran `bin/fact analyze` and viewed web UI. Nothing exploded too violently.
Subscribers: yelirekim
Maniphest Tasks: T13083
Differential Revision: https://secure.phabricator.com/D19119
Summary:
See PHI370. Support the "Affected packages" and "Affected package owners" Herald fields in pre-commit hooks.
I believe there's no technical reason these fields aren't supported and this was just overlooked.
Test Plan: Wrote a rule which makes use of the new fields, pushed commits through it. Checked transcripts and saw sensible-looking values.
Differential Revision: https://secure.phabricator.com/D19104
Summary: Depends on D19087. Ref T13079. This still doesn't feel like the most clean, general system in the world, but is a step forward from hard-coded `switch()` stuff.
Test Plan:
- Jumped to `r`.
- Jumped to `a`.
- Jumped to `r poe` (multiple results).
- Jumped to `r poetry` (one result).
- Jumped to `r syzygy` (no results).
- Jumped to `p`.
- Jumped to `p robot` (multiple results); `p assessment` (one result).
- The behavior for `p <string>` has changed slightly but should be more powerful now (it's consistent with `r <string>`).
- Jumped to `s <symbol>` and `s <context>-><symbol>`.
- Jumped to `d`.
- Jumped to `f`.
- Jumped to `t`.
- Jumped to `T123`, `D123`, `@dog`, `PHID-DREV-abcd`, etc.
Maniphest Tasks: T13079
Differential Revision: https://secure.phabricator.com/D19088
Summary: Ref T13079. This recently-introduced Engine/EngineExtension are a good fit for adding more datasource functions in general, but we didn't think quite big enough in naming them.
Test Plan: Used quick search typeahead, hit applications/users/monograms/symbols/etc.
Maniphest Tasks: T13079
Differential Revision: https://secure.phabricator.com/D19087
Summary: Depends on D19063. Ref T13054. Prepare for the addition of a new `PREPARING` status by getting rid of the "scattered mess of switch statements" pattern of status management.
Test Plan: Searched/browsed buildables. Viewed buildables. Viewed revisions. Grepped for all affected symbols.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19064
Summary:
See D18176. This query has no effect (other than wasting resources) and the result is unused.
`$repository` already has the URI loaded because we load them unconditionally during request initialization.
Test Plan: Viewed repository URIs.
Subscribers: jmeador
Differential Revision: https://secure.phabricator.com/D19036
Summary:
Ref T13053. Fixes T7804. Adds "Acting user" so you can have "always email me" stuff skip things you did or keep an eye on suspicious interns.
For the test console, the current user is the acting user.
For pushes, the pusher is the acting user.
Test Plan: Wrote acting user rules, triggered them via test console and via multiple actors on real objects.
Maniphest Tasks: T13053, T7804
Differential Revision: https://secure.phabricator.com/D19031
Summary:
This command also needs a "." instead of an empty string now.
(This powers the file browser typeahead in Diffusion.)
Test Plan: Will test in production since there's still no easy 2.16 installer for macOS.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19010
Summary:
Ref T13057. This makes "reverts" syntax more visible and useful. In particular, you can now `Reverts Dxx` in a revision or commit, and `Reverts <hash>` from a revision.
When you do, the corresponding object will get a more-visible cross-reference marker in its timeline:
{F5405517}
From here, we can look at surfacing revert information more heavily, since we can now query it on revision/commit pages via edges.
Test Plan: Used "reverts <hash>" and "reverts <revision>" in Differential and Diffusion, got sensible results in the timeline.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13057
Differential Revision: https://secure.phabricator.com/D18978
Summary:
Depends on D18972. Ref T13049.
Currently, the "flags" columns renders an inscrutible bitmask which you have to go hunt down in the code. Show a list of flags in human-readable text instead.
The "code" column renders a meaningless integer code. Show a text description instead.
The pull logs and push logs pages don't have a crumb to go back up out of the current query. Add one.
Test Plan: Viewed push logs, no more arcane numbers. Saw and clicked crumbs on each log page.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18973
Summary:
Depends on D18970. Ref T13049. Currently, the policy for viewing remote addresses is:
- In activity logs: administrators.
- In push and pull logs: users who can edit the corresponding repository.
This sort of makes sense, but is also sort of weird. Particularly, I think it's kind of hard to understand and predict, and hard to guess that this is the behavior we implement. The actual implementation is complex, too.
Instead, just use the rule "administrators can see remote addresses" consistently across all applications. This should generally be more strict than the old rule, because administrators could usually have seen everyone's address in the activity logs anyway. It's also simpler and more expected, and I don't really know of any legit use cases for the "repository editor" rule.
Test Plan: Viewed pull/push/activity logs as non-admin. Saw remote addresses as an admin, and none as a non-admin.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18971
Summary: Ref T13049. This is just a general nice-to-have so you don't have to export a 300MB file if you want to check the last month of data or whatever.
Test Plan: Applied filters to all three logs, got appropriate date-range result sets.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18970
Summary:
Ref T13049. All exportable objects should always have these fields, so make them builtins.
This also sets things up for extensions (like custom fields).
Test Plan: Exported user data, got the same export as before.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18951
Summary: See PHI276. Ref T13048. The fix in D18933 got one callsite, but missed the one in the `callConduit()` method, so the issue isn't fully fixed in production. Convert this adapter to use a real viewer (if one is available) more thoroughly.
Test Plan: Ran rules in test console, saw field values. Will test in production again.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18950
Summary: Ref T13050. Oh boy. Both of them run `grep`!
Test Plan: Will push again.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13050
Differential Revision: https://secure.phabricator.com/D18945
A recent version of Git has changed some piece of behavior here and we
now get "fatal: ssh variant 'simple' does not support setting port"
when using a port. Explicitly setting GIT_SSH_VARIANT to `ssh` likely
fixes this.
Summary:
Depends on D18939. Ref T13047. Symbol lookup can be activated from a diff (in Differential or Diffusion) or from the static view of a file at a particular commit.
In the latter case, we need to figure out the path a little differently. The character and line number approaches still work as written.
Test Plan:
- Command-clicked symbols in the Diffusion browse view with blame on and off; saw path, line and char populate properly.
- Command-clicked symbols in Differential diff view to check I didn't break anything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18940
Summary: Depends on D18937. Ref T13047. When available, provide character positions so external indexers can return more accurate results.
Test Plan: Clicked symbols in Safari, Firefox and Chrome, got sensible-looking character positions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18939
Summary:
Depends on D18936. Ref T13047. Third parties can define external symbol sources that let users jump to PHP or Python documentation or query some server.
Give these queries more information so they can try to get better results: the path and line where the symbol appeared, and any known repository scope.
Test Plan: Wrote a fake external source that used this data, command-clicked a symbol in Differential, saw a fake external symbol result.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18937
Summary:
Depends on D18918. Ref T13046. Ref T5954. Pull logs can currently be browsed in the web UI, but this isn't very powerful, especially if you have thousands of them.
Allow SearchEngine implementations to define exportable fields so that users can "Use Results > Export Data" on any query. In particular, they can use this workflow to download a file with pull logs.
In the future, this can replace the existing "Export to Excel" feature in Maniphest.
For now, we hard-code JSON as the only supported datatype and don't actually make any effort to format the data properly, but this leaves room to add more exporters (CSV, Excel) and data type awareness (integer casting, date formatting, etc) in the future.
For sufficiently large result sets, this will probably time out. At some point, I'll make this use the job queue (like bulk editing) when the export is "large" (affects more than 1K rows?).
Test Plan: Downloaded pull logs in JSON format.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046, T5954
Differential Revision: https://secure.phabricator.com/D18919
Summary:
Depends on D18932. Ref T13048. See PHI276. In the cluster, we don't have device keys on `web` nodes. This is generally good, since they don't need them, and it means that we aren't putting more credentials than we need on those hosts.
However, it means that when we pull diff content to test "Commit" rules via the Herald test console, we use the omnipotent user and try to use device credentials, and this fails since we don't have any.
Instead, pass the real viewer in this case so we just sign the request as them, like we do for normal Diffusion requests.
Test Plan:
Wrote and ran a commit content rule locally, no issues.
This isn't completely convincing since my local setup does have device credentials, but I'll double-check in production once this deploys.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18933
Summary:
Depends on D18931. Ref T13048. Ref T13041. This field means "the first accepting reviewer, where order is mostly arbitrary". Modern rules should almost certainly use "Accepting Reviewers" instead.
Getting rid of this completely is a pain, but we can at least reduce confusion by marking it as not-the-new-hotness. Add a "Deprecated" group, move it there, and mark it for exile.
Test Plan:
Edited a commit rule, saw it in "Deprecated" group at the bottom of the list:
{F5395001}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048, T13041
Differential Revision: https://secure.phabricator.com/D18932
Summary:
Depends on D18915. Ref T13046.
- Distinguish between HTTP and HTTPS.
- Use more constants and fewer magical strings.
- For HTTP responses, give them better type information and more helpful UI behaviors.
Test Plan: Pulled over SSH and HTTP. Reviewed resulting logs from the web UI. Hit errors like missing/invalid credentials.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18917
Summary:
Depends on D18912. Ref T13046. Add a UI to browse the existing pull log table.
The actual log still has some significant flaws, but get the basics working.
Test Plan: {F5391909}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18914
Summary:
See PHI305. Ref T13046.
The SSH workflows currently extend `PhabricatorManagementWorkflow` to benefit from sharing all the standard argument parsing code. Sharing the parsing code is good, but it also means they inherit a `getViewer()` method which returns the ommnipotent viewer.
This is appropriate for everything else which extends `ManagementWorkflow` (like `bin/storage`, `bin/auth`, etc.) but not appropriate for SSH workflows, which have a real user.
This caused a bug with the pull logs where `pullerPHID` was not recorded properly. We used `$this->getViewer()->getPHID()` but the correct code was `$this->getUser()->getPHID()`.
To harden this against future mistakes:
- Don't extend `ManagementWorkflow`. Extend `PhutilArgumentWorkflow` instead. We **only** want the argument parsing code.
- Rename `get/setUser()` to `get/setSSHUser()` to make them explicit.
Then, fix the pull log bug by calling `getSSHUser()` instead of `getViewer()`.
Test Plan:
- Pulled and pushed to a repository over SSH.
- Grepped all the SSH stuff for the altered symbols.
- Saw pulls record a valid `pullerPHID` in the pull log.
- Used `echo {} | ssh ... conduit conduit.ping` to test conduit over SSH.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18912
Summary:
Ref T13043. We have ~4 copies of this logic (registration, lost password recovery, set password, set VCS password).
Currently it varies a bit from case to case, but since it's all going to be basically identical once account passwords swap to the new infrastructure, bring it into the Engine so it can live in one place.
This also fixes VCS passwords not being affected by `account.minimum-password-length`.
Test Plan: Hit all errors in "VCS Password" panel. Successfully changed password.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18902
Summary:
Ref T13043. Migrate VCS passwords away from their dedicated table to new the new shared infrastructure.
Future changes will migrate account passwords and remove the old table.
Test Plan:
- Ran migrations.
- Cloned with the same password that was configured before the migrations (worked).
- Cloned with a different, invalid password (failed).
- Changed password.
- Cloned with old password (failed).
- Cloned with new password (worked).
- Deleted password in web UI.
- Cloned with old password (failed).
- Set password to the same password as it currently is set to (worked, no "unique" collision).
- Set password to account password. !!This (incorrectly) works for now until account passwords migrate, since the uniqueness check can't see them yet.!!
- Set password to a new unique password.
- Cloned (worked).
- Revoked the password with `bin/auth revoke`.
- Verified web UI shows "no password set".
- Verified that pull no longer works.
- Verified that I can no longer select the revoked password.
- Verified that accounts do not interact:
- Tried to set account B to account A's password (worked).
- Tried to set account B to a password revoked on account A (worked).
- Spot checked the `password` and `passwordtransaction` tables for saniity.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18898
Summary:
See <https://discourse.phabricator-community.org/t/files-created-from-repository-contents-slightly-over-one-chunk-in-size-are-truncated-to-exactly-one-chunk-in-size/988/1>. Three issues here:
- When we finish reading `git cat-file ...` or whatever, we can end up with more than one chunk worth of bytes left in the internal buffer if the read is fast. Use `while` instead of `if` to make sure we write the whole buffer.
- Limiting output with `setStdoutSizeLimit()` isn't really a reliable way to limit the size if we're also reading from the buffer. It's also pretty indirect and confusing. Instead, just let the `FileUploadSource` explicitly implement a byte limit in a straightforward way.
- We weren't setting the time limit correctly on the main path.
Overall, this could cause >4MB files to "write" as 4MB files, with the rest of the file left in the UploadSource buffer. Since these files were technically under the limit, they could return as valid. This was intermittent.
Test Plan:
- Pushed a ~4.2MB file.
- Reloaded Diffusion a bunch, sometimes saw the `while/if` buffer race and produce a 4MB file with a prompt to download it. (Other times, the buffer worked right and the page just says "this file is too big, sorry").
- Applied patches.
- Reloaded Diffusion a bunch, no longer saw bad behavior or truncated files.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18885
Summary:
Fixes T13040. To reproduce:
- View a file with blame enabled, where some line has an associated revision (say, `D123`).
- Edit `D123` so it exists and is a valid revision, but the viewer can't see it.
- Reload the page.
Instead, only add revisions to the map if we actually managed to load them.
Test Plan: Page no longer fatals.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13040
Differential Revision: https://secure.phabricator.com/D18884
Summary: See D18857. Ref T13036. See PHI275. Explain what's going on here a little better since it isn't entirely obvious and debugging these stream parsers is a gigantic pain.
Test Plan: Read text.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13036
Differential Revision: https://secure.phabricator.com/D18859
Summary:
Depends on D18856. Ref T13036. See PHI275. When we receive a length frame but the buffer doesn't have any data yet, we currently emit a pointless 0-length data frame on the channel.
For normal chatter this is harmless/valid, but it causes problems when a channel has transitioned into bundle2 mode (probably it indicates "end of stream")?
In any case, it's never helpful, so if we're about to read a data block and don't have any data, just bail out until we see some more data.
Note that we can't end up here //expecting// a 0-length data block: both the `data-length` and `data-bytes` states already handle that properly.
Test Plan: Pushed 4MB changes to a Mercurial repository with Mercurial 4.1.1, was no longer able to hit channel errors.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13036
Differential Revision: https://secure.phabricator.com/D18857
Summary:
Depends on D18855. Ref T13036. This comment no longer seems to be accurate: anything we send over `stderr` is faithfully shown to the user with recent clients.
From [[ https://www.mercurial-scm.org/repo/hg/file/default/mercurial/help/internals/wireprotocol.txt | this document ]], the missing sauce may have been:
```
A generic error response type is also supported. It consists of a an error
message written to ``stderr`` followed by ``\n-\n``. In addition, ``\n`` is
written to ``stdout``.
```
That is, writing "\n" to stdout in addition to writing the error to stderr. However, this no longer appears to be necessary.
I think the modern client behavior is generally sensible (and consistent with the behavior of Git and Subversion) so this //probably// isn't a bug or me making a mistake.
Test Plan: With a modern client, threw some arbitrary exception during execution. Observed a helpful message on the client with no additional steps.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13036
Differential Revision: https://secure.phabricator.com/D18856
Summary:
Ref T13036. This code attempts to filter the "capabilities" message to remove "bundle2", but I think this has never worked.
Specifically, the //write// pathway is hooked, and "write" here means "client is writing a message to the server". However, the "capabilities" frame is part of the response, not part of the request. Thus, this code never fires, at least on recent versions of Mercurial.
Since I plan to support bundle2 and don't want to decode response frames, just get rid of this, assuming we'll achieve those goals.
I think this was just overlooked in D14241, which probably focused on the HTTP version. This code does (at least, potentially) do something for HTTP.
I'm leaving the actual "strip stuff" code in place for now since I think it's still used on the HTTP pathway.
Test Plan:
- Added debug logging, saw this code never hit even though `hg push --debug` shows the client believing bundle2 is supported.
- Logged both halves of the wire protocol and saw this come from the server, not the client.
- Ran the failing `hg push` of a 4MB file under hg 4.4.1, got the same error as before.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: cspeckmim
Maniphest Tasks: T13036
Differential Revision: https://secure.phabricator.com/D18855
Summary:
Fixes T13031. "Enormous" changes are basically changes which are too large to hold in memory, although the actual definition we use today is "more than 1GB of change text or `git diff` runs for more than 15 minutes".
If an install configures a Herald content rule like "when content matches /XYZ/, do something" and then a user pushes a 30 GB source file, we can't put it into memory to `preg_match()` it. Currently, the way to handle this case is to write a separate Herald rule that rejects enormous changes. However, this isn't obvious and means the default behavior is unsafe.
Make the default behavior safe by rejecting these changes with a message, similar to how we reject "dangerous" changes (which permanently delete or overwrite history) by default.
Also, change a couple of UI strings from "Enormous" to "Very Large" to reduce ambiguity. See <https://discourse.phabricator-community.org/t/herald-enormous-check/822>.
Test Plan: Changed the definition of "enormous" from 1GB to 1 byte. Pushed a change; got rejected. Allowed enormous changes, pushed, got rejected by a Herald rule. Disabled the Herald rule, pushed, got a clean push. Prevented enormous changes again. Grepped for "enormous" elsewhere in the UI.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: joshuaspence
Maniphest Tasks: T13031
Differential Revision: https://secure.phabricator.com/D18850
Summary:
See PHI262. Fixes T12578. Although this is a bit niche and probably better accomplished through advisory/soft measures ("Add blocking reviewers") in most cases, it isn't difficult to implement and doesn't create any technical or product tension.
If installs write a rule that blocks commits, that will probably also naturally lead them to an "add reviewers" rule anyway.
Also, allow packages to be hit with the typeahead. They're valid reviewers but previously you couldn't write rules against them, for no actual reason.
Test Plan: Used test console to run this against commits, got sensible results for the field value.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12578
Differential Revision: https://secure.phabricator.com/D18839
Summary: Ref T13030. See PHI254. This behavior could be cleaner than I've made it, but it fixes the "this is totally broken" issue, replacing a fatal/exception with an informative (just not terribly useful) page.
Test Plan:
- Added a submodule to a repository.
- In Diffusion, clicked some other file next to the submodule, then edited the URI to the submodule path instead.
- Before patch: fatal.
- After patch: relatively useful message about this being a submodule.
Note that it's normally hard to hit this URI directly. In the browse view, submodules are marked up as directories and linked to a separate submodule resolution flow.
{F5321524}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13030
Differential Revision: https://secure.phabricator.com/D18831
Summary: Depends on D18827. Ref T7789. See PHI204. See PHI131. This button got accidentally removed in Diffusion refactoring (`$data` is no longer used).
Test Plan: {F5321459}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D18828
Summary: See PHI131. Ref T7789. Although this probably isn't 100% complete, there don't seem to be any actual, known, practical blocking issues remaining (everything is either heresay or not reproducible).
Test Plan: Tried to push LFS locally, got blocked with a helpful message. Enabled setting, tried to push LFS locally, got a successful push.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D18825
Summary:
See <https://discourse.phabricator-community.org/t/diffusion-observed-mercurial-repository-history-broken/825>.
In D18769, I rewrote this from using the `--branch` flag (which is unsafe and does not function on branches named `--config=x.y` and such).
However, this rewrite accidentally changed the result order, which impacted Mercurial commit hisotry lists and graphs. Swap the order of the constraints so we get newest-to-oldest again, as expected.
Test Plan: Viewed a Mercurial repository's history graph, saw sensible chronology after the patch.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18817
Summary: Ref T13001, URLs that return multiple commits should show a list of those commits. Not sure if the actual list looks very pretty this way, but was wondering if this approach was vaguely correct.
Test Plan:
- Navigate to `install/rPbd3c23`
- User should see a list view providing links to `install/rPbd3c2355e8e2b220ae5e3cbfe4a057c8088c6a38` and `install/rPbd3c239d5aada68a31db5742bbb8ec099074a561`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T13001
Differential Revision: https://secure.phabricator.com/D18816
Summary: Ref T13019, adds build status back to Diffusion commits
Test Plan: Open a Diffusion commit that has a build status, property list view should show the build status, but not Subscriptions, Projects, or Tokens.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T13019
Differential Revision: https://secure.phabricator.com/D18813
Summary: See PHI234. In T12931 we improved the behavior of Diffusion when a repository's default branch is set to a branch that does not exist, but in T11823 the way refcursors work changed, and we can now get a cursor (just with no positions) back for a deleted branch. When we did, we didn't handle things gracefully.
Test Plan:
- Set default branch to a deleted branch, saw nice error instead of fatal.
- Set default branch to a nonexistent branch which never existed, saw nice error.
- Set default branch to existing "master", saw repository normally.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18811
Summary:
See PHI234. Several issues here:
- The warning about observing a repository in Read/Write mode checks the raw I/O type, not the effective I/O type. That means we can fail to warn if other URIs are set to "Default", and "Default" is "Read/Write" in practice.
- There's just an actual typo which prevents the "Observe" version of this error from triggering properly.
Additionally, add more forceful warnings that "Observe" and "Mirror" mean that you want to //replace// a repository with another one, not that we somehow merge branches selectively. It isn't necessarily obvious that "Observe" doesn't mean "merge/union", since the reasons it can't in the general case are somewhat subtle (conflicts between refs with the same names, detecting ref deletion).
Test Plan:
Read documentation. Hit the error locally by trying to "Observe" while in Read/Write mode:
{F5302655}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18810
Summary:
Use ClassQuery to find datasources for the quick-search.
Mostly, this allows extensions to add quicksearches.
Test Plan:
using `/typeahead/class/`, tested several search terms that make sense.
Removed the tag interface from a datasource, which removed it from results.
Reviewers: epriestley, amckinley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18760
Summary:
Ref T13012. These flags can be exploited by attackers to execute code remotely. See T13012 for discussion and context.
Additionally, harden some Mercurial commands where possible (by using additional quoting or embedding arguments in other constructs) so they resist these flags and behave properly when passed arguments with these values.
Test Plan:
- Added unit tests.
- Verified "--config" and "--debugger" commands are rejected.
- Verified more commands now work properly even with branches and files named `--debugger`, although not all of them do.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13012
Differential Revision: https://secure.phabricator.com/D18769
Summary: Give profile images a little more space, fix "/" spacing, add a tooltip.
Test Plan: {F5251205}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18749
Summary: Depends on D18746. See PHI174. Adds small author portraits next to each blame line (this is similar to GitHub).
Test Plan:
My local test data isn't that great since I don't have commits from a lot of accounts, but looks functional:
{F5251056}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18747
Summary:
Ref PHI174. This reverts most of these changes:
- 37843127e9 / D18481
- 94cad30ac3 / D18474
- 12ae08b6b1 / D18473
- 0a01334172 / D18462
- ac91ab1ef9 / D18452
These changes made the Diffusion blame view very similar to GitHub's blame view. See D18452 for a before/after of the bulk of these changes; the other revisions are bugfixes.
I think this was generally a step backward, and not motivated by solving a specific problem. I've found the new UI less usable than the old one, and at least one install (see PHI174) also has.
In particular, the revision/commit titles are very bulky and not terribly useful; the date column also isn't terribly useful; the "age" color actually IS pretty useful and was heavily de-emphasized.
I've kept one bugfix here (missing `'a'` tag type) and kept the upgraded icon for "Skip Past This Commit".
I'm going to follow this up with some additional changes:
- Show a small author profile icon, similar to GitHub, to address PHI174 more directly.
- Try a zebra-stripe on blocks of rows to make it more clear where changes affected by a particular commit begin and end.
- Try a hue shift, not just a brightness/saturation shift, to make the "age" color more distinct.
- Try computing colors as even steps, not based purely on age. Currently, if a file has one long-distant commit and several recent commits, all the recent ones show up as very bright green. I think this would probably be more useful if they were distributed more evenly across the available color bands.
Test Plan:
Viewed blame views in Diffusion, saw a more compact UI similar to the old UI.
{F5251019}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18746
Summary:
Ref T12680. See PHI167. See that task for discussion.
Rewrite `DiffusionCommitQuery` to work more like `DifferentialRevisionQuery`, and use a UNION to find "all revisions you need to audit OR respond to".
I tried to get this working a little more cleanly than RevisionQuery does, and can probably simplify that now.
Test Plan: Poked at the UI locally without hitting any apparent issues, but my local data is pretty garbage at this point. I'll take a look at how the query plans work on `secure`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12680
Differential Revision: https://secure.phabricator.com/D18722
Summary:
See PHI158. In the RefEngine, we test if any old branch positions have been removed from the repository. This is uncommon (but not impossible) in Mercurial, and corresponds to users deleting branches in Git.
Currently, we end up running `hg log` for each position, in parallel. Because of Python's large startup overhead, this can be resource intensive for repositories with a large number of branches.
We have to do this in the general case because the caller may be asking us to resolve `tip`, `newfeature`, `tip~3`, `9`, etc. However, in the specific case where the refs are 40-digit hashes, we can bulk resolve them if they exist, like this:
```
hg log ... --rev (abcd or def0 or ab12 or ...)
```
In the general case, we could probably do less of this than we currently do (instead of testing all old heads, we could prune the list by removing commits which we know are still pointed to by current heads) but that's a slightly more involved change and the effect here is already dramatic.
Test Plan:
Verified that CPU usage drops from ~110s -> ~0.9s:
Before:
```
epriestley@orbital ~/dev/phabricator $ time ./bin/repository refs nss
Updating refs in "nss"...
Done.
real 0m14.676s
user 1m24.714s
sys 0m21.645s
```
After:
```
epriestley@orbital ~/dev/phabricator $ time ./bin/repository refs nss
Updating refs in "nss"...
Done.
real 0m0.861s
user 0m0.882s
sys 0m0.213s
```
- Manually resolved `blue`, `tip`, `9`, etc., got expected results.
- Tried to resolve invalid hashes, got expected result (no resolution).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18717
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary:
Ref PHI109. Ref T11786. We currently test elapsed time every 64 iterations (since iterations are normally very fast), but at least one install is seeing the page timeout after 30 seconds.
One reason could be that cache fills may occur, and are likely to be much slower than normal iterations. In an extreme case, we could do 64 cache fills before checking the time. Tweak thing so that we always check the time after doing a cache fill, regardless of how many iterations have elapsed since the last attempt.
Additionally, this API method currently accepts an arbitrary number of paths, but implicitly limits each cache query to 500ms. If more than 60 paths are passed, this may exceed 30s. Only let the cache churn for a maximum of 10s across all paths.
If this is more the latter issue than the former, this might replace the GraphCache timeouts with `git` timeouts, but at least our understanding of what's going on here will improve.
Test Plan: This is difficult to test convincingly locally, since I can't reproduce the original issue. It still works after these changes, but it worked fine before these changes too.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11786
Differential Revision: https://secure.phabricator.com/D18692
Summary:
See PHI112. The install presumably wants to generate links to Diffusion commits from an external tool, but only knows the short name of the repository.
Provide a `/source/phabricator/commit/abcdef908273` URI which redirects to the canonical URI for the commit.
Test Plan:
- Visited `/source/` URI for a commit, got a redirect.
- Visited normal URI for a commit, got a commit page.
- Visited `/branches/` and `/tags/` for a `/source/` repository, got proper pages.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18676
Summary:
Ref PHI101. It looks like this was maybe copy/pasted by mistake in recent design refactoring.
We need to pass the full path, not the `basename()` of the path, to the search form.
Test Plan: Searched inside `scripts/test/`, found results inside `scripts/test/`.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18664
Summary:
Ref T11823. This is the meaty part of the change, and updates `RefEngine` to use separate RefCursor (for names) and RefPosition (for actual commit positions) tables.
I'll hold this whole series until after the release cut so it has some time to bake on `secure` to look for issues. It's also not a huge problem if there are bugs here since these tables are just caches anyway, although they do feed into some other things, and obviously it's never good to have bugs.
Test Plan:
- This logic can be invoked directly with `bin/repository refs <repository> --trace --verbose`.
- Ran that on unchanged repositories, new branches, removed branches, and modified branches. Saw appropriate output and cursor positions.
- Ran on a mercurial repository to test the close/open logic, saw it correct open/closed state of incorrect positions.
- Browed around Diffusion in various repositories.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18614
Summary:
See <https://discourse.phabricator-community.org/t/unable-to-use-current-mercurial-on-debian-stretch/391>.
The Mercurial commit is helpful in particular: <https://www.mercurial-scm.org/repo/hg/rev/77eaf9539499>
We weren't vulnerable to the security issue (users can not control any part of the command) but pass the working directory explicitly to get past the new safety check.
I left `setCWD()` in place (a few lines below) just because it can't hurt, and in some other contexts it sometimes matter (for example, if commit hooks execute, they might inherit the parent CWD here or in other VCSes).
Test Plan:
- Cloned from a Mercurial repo locally over HTTP.
- Verified that SSH cloning already uses `-R` (it does, see `DiffusionMercurialServeSSHWorkflow`).
- Did not actually upgrade to Mercurial 4.0/4.1.3 to completely verify this, but a user in the Discourse thread asserted that a substantially similar fix worked correctly.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18611
Summary: Miss this with earlier pass, updates the VCS password page.
Test Plan: Try to set a vcs password
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18574
Summary: This should have a border
Test Plan: Reload page
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18549
Summary: Adds a `MenuName` method to applications that `ProfileMenuItem` uses instead of the application name if set. This improves the home/menu/new user experience at little cost. Also renamed the label from Applications to Favorites, since this menu gets altered to provide more than just applications. This also allows instances to set back to Maniphest if they so choose. Overall I think this direction resolves 95% of my concerns, with maybe a small potential downside which I don't really anticipate. We already name Dashboard panels by their object, and that hasn't really caused confusion. I think these links are similar. I click 'Tasks' and get presented a list of my tasks from Maniphest.
Test Plan: Review each of the name changes as a default new install and a modified install.
Reviewers: epriestley, amckinley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18524
Summary: Simplifies the Repository Management pages to the new fixed column layout. I've also moved "Status" into the Basics page, which feels better, and moved "Documentation" as a nav item to a button in the header. This removed "action list" and "curtain view" from the management panels and uses the new bits from Config/Phacility. Undecided if the icons should stay or go for the nav. Left them in for Diffusion. I want to update the EditEngine pages to display in this UI and not leave the portal, but I haven't dug into that this page. I'm a bit worried it will not easily be possible.
Test Plan:
Generate a svn, git, hg repository, test each of the new pages and each of the new buttons. Activate, deactivate, etc.
{F5164674}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18523
Summary: Implements a new mobile view thats more fullscreen, not boxed, so more space. Fixes issues with mobile tables when scrolling overflowed content.
Test Plan: Test home, branch, tags, code, file browse, graph, compare, history, readme, open revisions, owners.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18505
Summary: Visually selects the button if blame is on.
Test Plan: Turn blame on and off in Diffusion on a file.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18504
Summary: 50% more line, no additional cost! Order Now! Operators are standing by.
Test Plan: Blame a file
Reviewers: epriestley, avivey
Reviewed By: avivey
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18481
Summary: My fake data was 100%, and not all tables have full revision history. This leads to a broken table. Instead check if we have //any// revisions at all, then always show the column, with or without a link inside.
Test Plan: going on a limb this is the correct fix and test on secure... again ...
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18474
Summary: There is still some layout issues with revisions, so I've tested it better and moved it to it's own column
Test Plan: Fake in some revision data, test various sizes and shapes.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18473
Summary: I missed an anchor tag here, adds it back
Test Plan: View blame, click a previous version of the file, click Back to HEAD link.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18451
Summary: Ref T12824, adds more information to the blame view, exposes date, commit summary, lighter colors.
Test Plan:
Review many diffs with and without blame on.
{F5111758}
{F5111759}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T12824
Differential Revision: https://secure.phabricator.com/D18452
Summary: Moves browseFile to single column, implements Owners as a list under the file (and now directory as well), improved information listed in Owners, and moves actions into the Diffusion action bar instead of the header.
Test Plan:
Test browsing directories, files, text, images, binaries, enabling blame. Mobile and desktop.
{F5111045}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18448
Summary: Adds some basic UI for open / closed state when viewing a list of branches in Mercurial. Fixes T12838
Test Plan: Close and open branches, view list.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12838
Differential Revision: https://secure.phabricator.com/D18447
Summary: Better table layouts here for branches view
Test Plan: Test git, hg repositories. See column go away.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18444
Summary: This is in the crumbs, but a little hidden. Puts branch name at the top of the browse table header.
Test Plan: Review a few branchs, change branch, see new name.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18441
Summary: Adds an icon for default branch, status for branch status
Test Plan: Review `hg` and `git` repositories, change default branch, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18443
Summary: Moves the method up to DiffusionController, so it can be more universally used. Also now center aligns tabs on mobile. Still todo, get search nicely toggled on mobile
Test Plan: Test mobile, desktop. Test search from home, from browse, and browsing a specific path.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18432
Summary: Moving this down the the "bar" to allow pattern search on home. Rebuilds the mobile layout a little.
Test Plan:
Test actions on mobile, desktop, tablet.
{F5100460}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18431
Summary: Roughs this in a little, kinda basic. Allows for grouping results by page. A bit better on mobile. Would like more content return from conduit though.
Test Plan:
Test `CMS`, `cms`, and `OMGLOLWTFBBQ`, desktop and mobile
{F5099081}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18429
Summary: This is only on browse pages, but I think could be global (home) also. Moves it from a button, field, to just a field.
Test Plan:
Review search on desktop, mobile.
{F5098886}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18428
Summary: Removing this cleanly in event we want to put it back later. 99% of these cases are likely workable either by command line or the typeahead. Will gauge feedback if users notice.
Test Plan: Reload page, perform file grep search.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18425
Summary: Getting to the straight browse view went away, this adds a link back. I'll look at more long term solution for getting to grep search.
Test Plan: Click on header, get take to browse view.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18421
Summary:
Ref T2543. These are the last `ArcanistDifferentialRevisionStatus` callsites.
This removes the very old legacy `precommitRevisionStatus` field, which has no other readers. This was obsoleted by the `CLOSED_FROM_ACCEPTED` stuff, but retained for compatibility.
Test Plan:
- Poked these with the test console, although they're a little tricky to be sure about.
- Grepped for `ArcanistDifferentialRevisionStatus`, no more hits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18416
Summary: Ref T2543. Several queries want only open revisions. Provide a tailored, non-legacy way to issue that query.
Test Plan: Viewed some of these callsites (e.g., "Similar open revisions affecting these files"), saw only open revisions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18395
Summary:
Ref T12961. In Mercurial, it's possible to have "subrepos" which may use a different protocol than the main repository.
By putting an SSH repository inside an HTTP repository, an attacker can theoretically get us to execute `hg` without overriding `ui.ssh`, then execute code via the SSH hostname attack.
As an immediate mitigation to this attack, specify `ui.ssh` unconditionally. Normally, this will have no effect (it will just be ignored). In the specific case of an SSH repo inside an HTTP repo, it will defuse the `ssh` protocol.
For good measure and consistency, do the same for Subversion and Git. However, we don't normally maintain working copies for either Subversion or Git so it's unlikely that similar attacks exist there.
Test Plan:
- Put an SSH subrepo with an attack URI inside an HTTP outer repo in Mercurial.
- Ran `hg up` with and without `ui.ssh` specified.
- Got dangerous badness without `ui.ssh` and safe `ssh` subprocesses with `ui.ssh`.
I'm not yet able to confirm that `hg pull -u -- <uri>` can actually trigger this, but this can't hurt and our SSH wrapper is safer than the native behavior for all Subversion, Git and Mercurial versions released prior to today.
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T12961
Differential Revision: https://secure.phabricator.com/D18389
Summary: Fixes T12832. Adds a basic table (not paginated?) to view tracking and autoclose status.
Test Plan:
Review a large repository (Krita) with setting various states of tracking and autoclose.
{F5092117}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12832
Differential Revision: https://secure.phabricator.com/D18386
Summary:
Ref T2543. Currently, Differential uses a set of hard-coded query filters (like "open" and "closed") to query revisions by status (for example, "open" means any of "review, revision, changes planned, accepted [usually]").
In other applications, like Maniphest, we've replaced this with a low level list of the actual statuses, plus higher level convenience UI through tokenizer functions. This basically has all of the benefits of the hard-coded filters with none of the drawbacks, and is generally more flexible.
I'd like to do that in Differential, too, although we'll need to keep the legacy maps around for a while because they're used by `differential.find` and `differential.getrevision`. To prepare for this, pull all the legacy stuff out into a separate class. Then I'll modernize where I can, and we can get rid of this junk some day.
Test Plan: Grepped for `RevisionQuery::STATUS`. Ran queries via Differential UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18343
Summary:
Ref T2543. These are currently numeric values, like "0" and "3". I want to replace them with strings, like "accepted", and move definitions from Arcanist to Phabricator.
To set the stage for this, reduce the number of callsites where Phabricator invokes `ArcanistDifferentialRevisionStatus`.
This is just the easy ones. I'll hold this until the release cut.
Test Plan:
- Called `differential.find`.
- Called `differential.getrevision`.
- Called `differential.query`.
- Removed all reviewers from a revision, saw warning.
- Abandoned the no-reviewers revision, no more warning.
- Attached a revision to a task to get it to show the state icon with the status on a tooltip.
- Viewed revision bucketing on dashboard.
- Used `bin/search index` to reindex a revision.
- Hit the "Land Revision" endpoint.
I didn't explicitly test these cases:
- Doorkeeper Asana integration, since setup takes a thousand years.
- Disambiguation logic when multiple hashes match, since setup is also very involved.
- Releeph because it's Releeph.
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18339
Summary: Just a few more.
Test Plan: Edit Picture, see new image, choose image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18370
Summary:
Fixes T12942.
- Adds binary version and path information to {nav Config > Version Information}.
- Replaces old code all over the place with new consolidated code.
Test Plan:
{F5073531}
Also faked some cases of missing binaries, bad versions, etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12942
Differential Revision: https://secure.phabricator.com/D18306
Summary:
In Diffusion, the "Tags" view may read commits which haven't imported or parsed yet, and thus don't have loadable objects.
Most of this logic tests for `if ($commit)`, but the author part did not. Instead, don't render author information if `$commit` is not present.
Test Plan:
- Loaded tags view with commits present.
- Faked `$commit = null;`, loaded tag view, got this instead of a fatal:
{F5068432}
Reviewers: chad, amckinley
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18290
Summary:
Fixes T12893. See also PHI15. This is complicated but:
- In the documentation, we say "register your web devices with Almanac". We do this ourselves on `secure` and in the production Phacility cluster.
- We don't actually require you to do this, don't detect that you didn't, and there's no actual reason you need to.
- If you don't register your "web" devices, the only bad thing that really happens is that creating repositories skips version initialization, creating the bug in T12893. This process does not actually require the devices be registered, but the code currently just kind of fails silently if they aren't.
Instead, just move forward on these init/resync phases even if the device isn't registered. These steps are safe to run from unregistered hosts since they just wipe the whole table and don't affect specific devices.
If this sticks, I'll probably update the docs to not tell you to register `web` devices, or at least add "Optionally, ...". I don't think there's any future reason we'd need them to be registered.
Test Plan:
This is a bit tough to test without multiple hosts, but I added this piece of code to `AlmanacKeys` so we'd pretend to be a nameless "web" device when creating a repository:
```
if ($_REQUEST['__path__'] == '/diffusion/edit/form/default/') {
return null;
}
```
Then I created some Git repositories. Before the patch, they came up with `-` versions (no version information). After the patch, they came up with `0` versions (correctly initialized).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12893
Differential Revision: https://secure.phabricator.com/D18273
Summary: Fixes T12931. Adds a branch selector that's always visible if the repo has commits.
Test Plan:
Test a plain hg, svn, git repository. Test setting a bad default branch. Test a good default branch. Test on desktop, mobile layouts.
{F5058061}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12931
Differential Revision: https://secure.phabricator.com/D18267
Summary: This spelling can definitely feel a little overplayed at times, but I still think it's a gold standard in spellings of "capabilities".
Test Plan: Felt old and uncool.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18215
Summary: Just some cleanup. Make sure action-bar has consistent space if locate is there or not, hide tabs if repository has no content. Use clone or checkout language depending on SCM. Fixes T12915.
Test Plan:
Test git, hg, svn blank states.
{F5042707}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12915
Differential Revision: https://secure.phabricator.com/D18208
Summary: This moves the clone details on the Repository Home to a button / dialog. Functionally this is to pull content on the page way up, while giving full space to all the clone options. I think we can build this into some FancyJS if needed, but this seems to clean ui the UI dramatically with little overhead. I don't want to attempt the JS dropdown unless we're sure that's the best path (it exposes the most common URI by default, saving a click).
Test Plan: Tested hg, svn, git repositories and the raw URL page. Test close button.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18203
Summary: This moves actions into the Diffusion main header, removes the locate file box, and widens description and cloning details. Projects are not currently in this layout, but will follow up in another diff. Trying to keep these changes small and iterative.
Test Plan:
Locate some files, test actions dropdown, repository with and without description. Also tablet, mobile layouts.
{F5040026}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18193
Summary: Cleans up colors, removes commit hash and links the text instead. Also unsure how valuable "lint" column is here, but left it. I'd maybe like to understand that workflow since it just seems like clutter overall. Also Fixes T12905
Test Plan:
Review Phabricator, hg, and a few other test repositories locally. Holler if anything here seems bad, but this feels easier to read and use to me.
{F5038425}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12905
Differential Revision: https://secure.phabricator.com/D18189
Summary:
Adds a responsive tab bar navigation to Diffusion. Working through the new design here in pieces, so keep in mind M1477 is the target. Notably:
- Removes "branches" and "tags" from RevisionView, now on tabs
- Keeps "browse", "history", "readme" on RevisionView
- Adds tabs for all main views, including Graph... unless how that feels, so let me know.
Test Plan: Browse all pages, desktop and mobile. Test hg, svn, git repositories.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18161
Summary: Fixes T12894. See that task for discussion.
Test Plan:
- Created repositories `abcdef`, then `abcdef-a` through `abcdef-f`.
- Before patch, awkward sort order.
- After patch, query for `abcdef` hits `abcdef` first.
- See T12894 for details and screenshots.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12894
Differential Revision: https://secure.phabricator.com/D18179
Summary: The main change here is moving (compare, search, history) into buttons in the header bar on all browse views. This allows Directory Browsing to be full width, since there is no other curtain information. File, Image, LFS, Binary all stay in TwoColumn layouts with the same buttons in the header.
Test Plan: Test viewing a directory, file, image, binary file, readme, and fake a gitlfs.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17766
Summary:
Fixes T12884. In cases other than this UI, applications access URIs through the Repository they're part of. This means that applications interact with URIs which have gone through the correction/adjustment logic in `PhabricatorRepository->attachURIs()`, which fixes up "builtin" URIs to have the right values based on configuration.
In this case (and, as far as I can tell, only this case) we load the URI directly //and// act on its properties which depend on configuration and repository state.
This can mean we're using a different view of the URI than we should be.
To fix this: after loading the URI, reload it through the repository so the relevant adjustments are applied.
I think this is the most reasonable fix. We could try to make `RepositoryURIQuery` somehow enforce this, but the cost of this error is small (mild confusion about display state), the other things which do direct loads don't depend on this state (editing), and everything else loads via a repository and is likely to continue doing that forever.
Test Plan: {F5026633}
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12884
Differential Revision: https://secure.phabricator.com/D18176
Summary: Fixes T12840. This adds a parallel "graph" button next to history on home and on the history list page. I'll think more about better placement of how to get to this page with the upcoming redesign that's still sitting in Pholio.
Test Plan: View History, View Graph, Try pager, go to a file, click view history, see no graph button.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12840
Differential Revision: https://secure.phabricator.com/D18131
Summary: Moves DiffusionTagsListView to uhhh, list. Separates out table view which is still in use now, implements mobile friendly UI for tags.
Test Plan:
Review KDE's Krita repository locally with lots of tags, desktop and mobile.
{F4997708}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12824
Differential Revision: https://secure.phabricator.com/D18115
Summary: Adds a new DiffusionBranchListView which replaces the BranchTable when browsing all branches in Diffusion. Has all the same capabilities, but is easier to read, adds a Compare button, and plays nicely on mobile. It does take up more space, but I think that's generally OK here since we expect our branches to not be heaping piles of intern revert branches.
Test Plan:
Follow a few repositories with branches, like Phabricator and KDE's Krita. View layouts on mobile, tablet, desktop. Try out new compare button.
{F4996207}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: avivey, Korvin
Maniphest Tasks: T12824
Differential Revision: https://secure.phabricator.com/D18113
Summary: Builds out some images to use to identify repositories. Fixes T12825.
Test Plan:
Try setting custom, built in, and null images.
{F4998175}
{F4998192}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12825
Differential Revision: https://secure.phabricator.com/D18116
Summary:
Fixes T12807. Some shells may apparently mangle/strip UTF8 characters? Just dodge this whole problem by sending the pattern over stdin rather than actually figuring out the particulars.
Related tasks, like T7339 and T5554, discuss finding broader fixes for this class of issue, and this definitely isn't exactly a fully legitimate fix, but in many cases (as here) we can reasonably just avoid the problem rather than actually fixing it, at least for a long time.
Test Plan: Searched for emoji and non-emoji locally, but this worked fine (on OSX) for me before the patch too.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12807
Differential Revision: https://secure.phabricator.com/D18105
Summary: Porting over a fix that we could miss the tail end of commits. Also use the new tag borderless option.
Test Plan: Review various commit pages in profile.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18086
Summary: Little nits and spacing changes to viewing diffusion commit history on phones.
Test Plan:
Review in Chrome, iOS Simulator.
{F4990749}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18085
Summary: Formally support borderless tags in PHUITagView.
Test Plan: Used in Diffusion History List
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18074
Summary:
Commits in the list are grouped by the date they occurred in server time. This may not be the date they occurred in client time.
Use client time, not server time, to group commits.
Test Plan:
- Set server timezone to "Asia/Famagusta".
- Set client timezone to "America/Los_Angeles".
- Viewed Phabricator repository history.
Here's what it looks like before the change:
{F4987094}
Note that the headers of the first two groups both say "Yesterday".
This is because the first commits in each group occurred on June 1 and June 2, respectively, in Famagusta, but both occurred on June 1 in Los Angeles.
Here's what it looks like after the change:
{F4987095}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18067
Summary:
Currently, the last group of commits is not shown in the list view because the final `$list` is never added to `$view`.
For example, if the first page would contain commits from "April 7", "April 6", and "April 5", commits from "April 5" are not shown.
(If a repository has 100 commits in a single day, nothing is shown.)
On this server, here's the bottom of page 1:
{F4987087}
Here's the top of page 2:
{F4987088}
However, here's `git log` between those commits:
```
$ git log --oneline 7e46^..5f49f
5f49f9c793 Add sound to logged out Conpherence
1644b45050 Disperse task subpriorities in blocks
c6a7bcfe89 Make Pholio description behave as a remarkup field (e.g., subscribe mentioned users)
bbc5f79227 Make membership lock/unlock feed stories read more naturally
789d57522b Make editing project images redirect to "Manage" more consistently
10b3879232 Make Project slug/hashtag transactions render a little more nicely
abd791889c Update Maniphest title transaction again
5a34b299e4 Update Maniphest title language
601622013d Clarify milestone/subproject creation language
c9889e3d55 Fix an issue in Phriction where moving a document just copied it instead
fdf00f6df4 Clean up some minor UI behaviors in Differential
6c46f27d98 Add quest objectives to the minimap
d783299a19 Fix Phriction status not set property on new document
93e28da76e Add more "disabled" UI to PHUIObjectItemView
7e46d7ab6a Migrate Project color to modular transactions
```
This group of commits does not currently appear anywhere in the list.
Test Plan: Viewed a page of commits, saw 100 commits.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18066
Summary: Ref rPf2fcafb40dde94ddf4ee22716fea74fca0334a64#38208, I think this is a more usable layout. Gets rid of clippy, audit. Adds back Differential link as tag, Build Status as button.
Test Plan: Faked data on this for Differential, Builds, should all work though. Test on real and fake repositories.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18061
Summary: Ref T12780. Makes the button do something useful, like link to the history at the right spot in the graph.
Test Plan: Click on various browse buttons, get correct url.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12780
Differential Revision: https://secure.phabricator.com/D18054
Summary: This moves Diffusion History to use an easier to parse list view for commits and their (diff, audit, build) status. I left TableView around, which is used on a repositories home, and we can maybe add a "graph view" history back as another controller. Not sure what the real use is for that kind of feature though. I don't have Harbormaster set up locally so I could use another install to give this a run. I also expect to maybe not live with this UI as final, I like the UX, but the icons for indicating status don't really feel great to me, just OK.
Test Plan:
pull various repositories, check various history displays.
{F4980356}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18039
Summary: I think this name is more accurate, also add proper links to author image.
Test Plan: Review commits in sandbox, see new URL on image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18026
Summary: Gives the ability to hide a big long block of text in an ObjectListItem without cluttering the UI.
Test Plan:
Added a test case to UIExamples. Click on icon, see content. Click again, content go away.
{F4974153}
{F4974311}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18006
Summary: Going to play a bit with this layout (diffusion sans audit) and see how it feels on profile. Uses a user image, moves the commit hash (easily selectible) and separates commits by date.
Test Plan:
Review profiles with and without commits.
{F4973987}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18005
Summary: This moves the navigation to a standard sidebar, and moves all actions to the curtain. Also pulled out info view when available for cleaner UI.
Test Plan:
Create a git, svn, hg test repository and verify each page in the sidebar renders as expected.
{F4973792}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18003
Summary: Grep for phui-tag-shade and verify we're no longer calling shade-color directly.
Test Plan: Search, workboard, story points, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17993
Summary: Ref T12616. This moves most keyboard shortcuts into DiffChangesetList. It breaks some shortcuts that I plan to restore later, noted in T12616 (toggle file, edit inline, reply to inline), since I think ripping them out now and rebuilding them in a little bit will make things much simpler.
Test Plan:
- Used j, k, n, p, J, K shortcuts to navigate a revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17859
Summary:
Ref T12613. Currently, the SVNTEST and HGTEST repositories are improperly configured on `secure`. These repositories use VCS systems which do not support synchronization, so they can not be served from cluster services with multiple hosts.
However, I've incorrectly configured them the same way as all the Git repositories, which support synchronization. This causes about 50% of requests to randomly fail (when they reach the wrong host).
Detect this issue and warn the user that the configuration is not valid.
It should be exceptionally difficult for normal installs to run into this.
Test Plan:
- Mostly faked these conditions locally, verified that `secure` really has this configuration.
- I'll push this, verify that the issue is detected correctly in production, then fix the config which should resolve the intermittent issues with SVNTEST.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12613
Differential Revision: https://secure.phabricator.com/D17774
Summary: Uses more standard objects and more padding for reading. Removes the ToC, which is visually broken anyways.
Test Plan: Review a README.md in a local repository.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17752
Summary: Adds the ability to set a pager onto an object box directly and pick up appropriate styles.
Test Plan: grep for renderTablePagerBox, test layouts with and without a pager.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12604
Differential Revision: https://secure.phabricator.com/D17754
Summary: Ref T12509. This encourages code to move away from HMAC+SHA1 by making the method name more obviously undesirable.
Test Plan: `grep`, browsed around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12509
Differential Revision: https://secure.phabricator.com/D17632
Summary:
Ref T12298. The PullLocal daemon has had hibernation code for a little while, but it never actually activated because we don't sleep for more than 15 seconds in any case.
Add a maximum sleep instead and use that to control the longest sleep we'll do for hibernation purposes.
Also, when a repository or repository URI is edited, write a NEEDS_UPDATE event into the message table to make sure the daemons de-hibernate.
Test Plan: Used `bin/phd debug pull`, saw the daemon actually hibernate instead of just sleeping for 15 seconds.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12298
Differential Revision: https://secure.phabricator.com/D17635
Summary:
Ref T11357. When creating a file, callers can currently specify a `ttl`. However, it isn't unambiguous what you're supposed to pass, and some callers get it wrong.
For example, to mean "this file expires in 60 minutes", you might pass either of these:
- `time() + phutil_units('60 minutes in seconds')`
- `phutil_units('60 minutes in seconds')`
The former means "60 minutes from now". The latter means "1 AM, January 1, 1970". In practice, because the GC normally runs only once every four hours (at least, until recently), and all the bad TTLs are cases where files are normally accessed immediately, these 1970 TTLs didn't cause any real problems.
Split `ttl` into `ttl.relative` and `ttl.absolute`, and make sure the values are sane. Then correct all callers, and simplify out the `time()` calls where possible to make switching to `PhabricatorTime` easier.
Test Plan:
- Generated an SSH keypair.
- Viewed a changeset.
- Viewed a raw diff.
- Viewed a commit's file data.
- Viewed a temporary file's details, saw expiration date and relative time.
- Ran unit tests.
- (Didn't really test Phragment.)
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T11357
Differential Revision: https://secure.phabricator.com/D17616
Summary: Ref T10967. The old name was because we had a `getReviewers()` tied to `needRelationships()`, rename this method to use a simpler and more clear name.
Test Plan: `grep`, browsed around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17519
Summary:
Ref T10967. There have been two different ways to load reviewers for a while: `needReviewerStatus()` and `needRelationships()`.
The `needRelationships()` stuff was a false start along time ago that didn't really go anywhere. I believe the idea was that we might want to load several different types of edges (subscribers, reviewers, etc) on lots of different types of objects. However, all that stuff pretty much ended up modularizing so that main `Query` classes did not need to know about it, so `needRelationships()` never got generalized or went anywhere.
A handful of things still use it, but get rid of them: they should either `needReviewerStatus()` to get reviewer info, or the ~3 callsites that care about subscribers can just load them directly.
Test Plan:
- Grepped for removed methods (`needRelationships()`, `getReviewers()`, `getCCPHIDs()`, etc).
- Browsed Diffusion, Differential.
- Called `differential.query`.
It's possible I missed some stuff, but it should mostly show up as super obvious fatals ("call needReviewerStatus() before getReviewerStatus()!").
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17518
Summary: These were once ordered, but I think we switched to being defined in the Engine and never implemented the sorts there. This adds sort ordering to Tasks, Projects, and Repositories.
Test Plan: Review Favorites Menu in local install, see order is now set per the engine. Click Edit Favorites, and re-order. See order sticks.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17490
Summary:
Ref T12335. Fixes T11207. Edit-like interactions which are not performed via "Edit <object>" are a bit of a grey area, policy-wise.
For example, you can correctly do these things to an object you can't edit:
- Comment on it.
- Award tokens.
- Subscribe or unsubscribe.
- Subscribe other users by mentioning them.
- Perform review.
- Perform audit.
- (Maybe some other stuff.)
These behaviors are all desirable and correct. But, particularly now that we offer stacked actions, you can do a bunch of other stuff which you shouldn't really be able to, like changing the status and priority of tasks you can't edit, as long as you submit the change via the comment form.
(Before the advent of stacked actions there were fewer things you could do via the comment form, and more of them were very "grey area", especially since "Change Subscribers" was just "Add Subscribers", which you can do via mentions.)
This isn't too much of a problem in practice because we won't //show// you those actions if the edit form you'd end up on doesn't have those fields. So on intalls like ours where we've created simple + advanced flows, users who shouldn't be changing task priorities generally don't see an option to do so, even though they technically could if they mucked with the HTML.
Change this behavior to be more strict: unless an action explicitly says that it doesn't need edit permission (comment, review, audit) don't show it to users who don't have edit permission and don't let them take the action.
Test Plan:
- As a user who could not edit a task, tried to change status via comment form; received policy exception.
- As a user who could not edit a task, viewed a comment form: no actions available (just "comment").
- As a user who could not edit a revision, viewed a revision form: only "review" actions available (accept, resign, etc).
- Viewed a commit form but these are kind of moot because there's no separate edit permission.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12335, T11207
Differential Revision: https://secure.phabricator.com/D17452
Summary:
Fixes T12322. Allows you to search for commits using the `tagged(...)` repository function, so you can find "any commmit in any repository tagged with android" or similar.
I moved the function from Differential (which was the application using it) to Diffusion (which is more accurately the application which provides it).
I fixed a bug where searching for `tagged(xyz)` would have no effect (constraint was ignored) if there were no repositories tagged with "xyz". The fix isn't perfectly clean, but should work properly for the moment.
Test Plan:
- Searched with `tagged(...)` in Diffusion and Differential.
- Searched by repository.
- Searched with `tagged(...)` for a project with no tagged repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12322
Differential Revision: https://secure.phabricator.com/D17426
Summary:
Fixes T12304. If you have a Herald rule which tries to add a commit author as an auditor, it fails validation when trying to apply.
Stop trying to apply these transactions, and explicitly tell the user why. Differential already uses a similar ruleset around reviewers, but Audit was using older code.
Test Plan:
- Wrote a Herald rule to add A, B and C as auditors.
- Committed as A.
- After change, saw B and C added with transacript guidance that A was the author.
{F3235660}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12304
Differential Revision: https://secure.phabricator.com/D17404
Summary:
Fixes T12302. Currently, we aren't merging multiple "AddAuditors" transactions correctly.
This can occur when Herald triggers multiple auditor rules.
Instead, merge them.
Test Plan:
- Wrote two different Herald rules that add auditors.
- Pushed a commit which triggered them.
- After the change, saw all the auditors get added correctly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12302
Differential Revision: https://secure.phabricator.com/D17403
Summary: Fixes T12253.
Test Plan:
- Before change: used "Quote Comment", saw "In null, alice wrote:" in quoted text.
- After change: used "Quote Comment", saw proper reference to the commit/page. Clicked reference, was sent to the comment properly.
{F2859093}
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T12253
Differential Revision: https://secure.phabricator.com/D17343
Summary: Fixes T12243. That error occured due to network flakiness with some mounted filesystems so I'm not sure how best to simulate it. But you can look and see that the PhutilProxyException does indeed expect an exception as its second arg.
Test Plan: Look at method signature... look at callsite... now back at the method. Smile and nod.
Reviewers: #blessed_reviewers, yelirekim, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T12243
Differential Revision: https://secure.phabricator.com/D17335
Summary: This just cleans up a method call that was missed in D15986. It's been causing fatal errors in one of our workflows.
Test Plan: Grep'd for other instances of `withIsTag` and didn't find any
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim
Differential Revision: https://secure.phabricator.com/D17299
Summary:
Ref T10978. I'm inching toward cleaning up our audit state. Two issues are:
- Authored commits show up in "Ready to Audit", but should not.
- Unreachable commits (like that stacked of unsquashed stuff) show up too, but we don't really care about them.
Kick authored stuff out of the "Ready to Audit" bucket and hide unreachable commits by default, with constraints for filtering. Also give them a closed/disabled/strikethru style.
Test Plan:
- Viewed audit buckets.
- Searched for reachable/unreachable commits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17279
Summary: Ref T10978. This code (mostly related to the old ADD_AUDIT transaction and some to the "store English text in the database" audit reasons) is no longer reachable.
Test Plan:
Grepped for removed symbols:
- withAuditStatus
- getActionNameMap (unrelated callsites exist)
- getActionName (unrelated callsites exist)
- getActionPastTenseVerb
- addAuditReason
- getAuditReasons
- auditReasonMap
Also audited some commits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17267
Summary:
Ref T10978. Currently, during commit import, we write an "Audit Not Required" auditor for commits which don't require an audit.
This auditor is used to power the "Commits in this package" query in Owners.
This conflates audits and commit/package membership. I think it might even predate edges. Code needs to dance around this mess and we get the wrong result in some cases, since auditors are now editable.
Instead, write an explicit edge which just says "this commit is part of such-and-such packages". Then use that to run the query. Logical!
I'll issue guidance on this but I'm not migrating it, since it fixes itself going forward and only really affects the UI in Owners.
Test Plan:
- Ran `bin/audit update-owners` with various arguments.
- Viewed packages in web UI, saw them load the proper commits.
- Queried by packages in Diffusion explicitly.
- Clicked the "View All" link in Owners and got to the right search UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17264
Summary:
Ref T10978. Convert "Add Auditors" rules in Herald to modern modular transactions.
Here and in D17262 (and in the next change), I've removed "audit reasons". There are several reasons for this:
- They're pretty hacky.
- They store English-language (well, usually) text in the database, which can't be translated.
- I think they may not be necessary. When they were written, Herald did not apply transactions, so it was less clear when Herald was doing something. In modern code, it does, so Herald auditors are clear. The owenrs/package rules are now more clear, too. I'd like to see evidence that confusion still exists before rebuilding this feature in a modern, translatable way, since I think we may not need it at all.
Test Plan: Ran `bin/repository reparse --herald <commit>` to re-run Herald rules. Saw rules add auditors appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17263
Summary: Ref T10978. This was introduced in D6923 in 2013 as a deprecated method (before methods were extensible) and has only ever been deprecated. It no longer works after D17250 (despite my mistaken claim there that we never had an API for actions), and has been superceded by `diffusion.commit.edit` which is a modern, fully-power method.
Test Plan: Viewed Conduit console, no longer saw method.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17254
Summary:
Fixes T2393. This allows authors to explicitly say "I think I fixed everything, please accept my commit now thank you".
Also improves behavior of "re-accept" and "re-reject" after new auditors you have authority over get added.
Test Plan:
- Kicked a commit back and forth between an author and auditor by alternately using "Request Verification" and "Raise Concern".
- Verified it showed up properly in bucketing for both users.
- Accepted, added a project, accepted again (works now; didn't before).
- Audited on behalf of projects / packages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2393
Differential Revision: https://secure.phabricator.com/D17252
Summary:
Ref T2393. We had three copies of this code ("which packages/projects can a user accept on behalf of?"). I removed one in D17250. This consolidates the other two.
This still isn't perfect and it should probably live in a Query or something some day, but there's some weird stuff going on with the viewer in the editor context, and at least the code handles the viewer correctly now and isn't living somewhere weird and totally unrelated to auditing, and the callsites don't need to do a bunch of extra work.
This also moves towards fixing the "re-accept if you've already accepted but then a new package you have authority over was added" bug, which we fixed recently in Differential. This should be less common in Audit, but should still be fixed.
Test Plan: Viewed and audited commits with a mixture of user, package, and project auditors. Saw actions apply to the expected set of auditors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2393
Differential Revision: https://secure.phabricator.com/D17251
Summary: Ref T2393. This has been obsoleted by stacked actions and is no longer used.
Test Plan: Grepped for callsites, viwed commits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2393
Differential Revision: https://secure.phabricator.com/D17249
Summary: Ref T2393. This adds a state-change transaction hint to Audit, like we have in Differential. This is partly for consistency and partly to make it more clear what should happen next.
Test Plan: {F2477848}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2393
Differential Revision: https://secure.phabricator.com/D17243
Summary:
Fixes T6024. Ref T12121. Currently, we show build status in commit history tables; show audit status alongside it.
Also:
- Change the "Author/Committer" header to just "Author"; I think it's reasonably obvious what "x/y" means (if you can't guess, you can click the commit and likely figure it out) and this gives us a little more space.
- Make the audit list look more like the corresponding list in Differential, with similar formatting.
Test Plan:
- Viewed history of a repostiory, saw audit status.
- Viewed a merge commit, saw audit status in the list of merged commits.
- Viewed a commit search results list.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12121, T6024
Differential Revision: https://secure.phabricator.com/D17227
Summary: Fixes T5889. You can't write a rule like "if no other Herald rules did anything...", but you can use this rule to check for Owners or an explicit "Auditors" field doing things.
Test Plan: Using the test console, ran an "Auditors" rule against a commit with and without an auditor. Got expected pass/fail outcomes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5889
Differential Revision: https://secure.phabricator.com/D17221
Summary: Ref T5867. Instead of hard-coding projects, tasks and repositories, let EditEngines say "I want a quick create item" so third-party code can also hook into the menu without upstream changes.
Test Plan: Saw same default items in menu.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5867
Differential Revision: https://secure.phabricator.com/D17215
Summary: Fixes T6660. Uses the new stuff in Audit to build an EditEngine-aware icon.
Test Plan: {F2364304}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6660
Differential Revision: https://secure.phabricator.com/D17208
Summary: Ref T10978. This is bare bones, but the SearchEngine is at least mostly in reasonable shape now, so get it in place and freeze the old stuff. I previously froze `audit.query`, which did much the same thing.
Test Plan: Issued some queries with the API, technically got results back.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17194
Summary:
Fixes T9430. Fixes T9362. Fixes T9544. This changes the default view of Audit to work like Differential, where commits you need to audit or respond to are shown in buckets.
This is a bit messy and probably needs some followups. This stuff has changed from a compatibility viewpoint:
- The query works differently now (but in a better, modern way), so existing saved queries will need to be updated.
- I've removed the counters from the home page instead of updating them, since they're going to get wiped out by ProfileMenu soon anyway.
- When bucketed queries return too many results (more than 1,000) we now show a warning about it. This isn't greaaaat but it seems good enough for now.
Test Plan: {F2351123}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T9430, T9362, T9544
Differential Revision: https://secure.phabricator.com/D17192
Summary: Ref T11114. Ref T10978. These hadn't made it over to EditEngine yet.
Test Plan:
- Took various actions on revisions and commits.
- Used `bin/mail show-outbound --id ...` to examine the "Vary Subject", saw it properly generate "[Accepted]", "[Resigned]", etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11114, T10978
Differential Revision: https://secure.phabricator.com/D17191
Summary: Ref T10978. Since "Resigned" is a status in Audit, you could repeatedly resign. This is confusing; prevent it.
Test Plan: Tried to resign twice; was only allowed to resign once.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17187
Summary:
Fixes T6630. Long ago, "Audit", "Diffusion" and "Repositories" were three totally separate applications.
This separation isn't useful and the three rapidly became intertwined. Ideally, they would all be one application.
This doesn't take us quite that far, but Audit no longer has any controllers and has little actual behavior.
The "Audit" screen has always just been a SearchEngine view of commits with some filters on it, and this formalizes that and puts a link to it in Diffusion. (This view has other uses, too.)
Test Plan:
- Accessed audit from home page.
- Accessed audit/commits from Diffusion.
- Could no longer uninstall Audit on its own.
- Grepped for `/audit/` and `AuditApplication`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T6630
Differential Revision: https://secure.phabricator.com/D17186
Summary:
Ref T10978. This prepares for swapping the comment UI to stacked actions.
These are only accessible via the API.
Test Plan: Used the API to accept, raise concern with, and reject commits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17182
Summary: Ref T10978. Ref T7676. Make auditors work more like reviewers, so they can be freely added or removed.
Test Plan:
- Interacted with auditors via "Edit Commit" and API.
- Comment area is still oldschool and doesn't work yet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978, T7676
Differential Revision: https://secure.phabricator.com/D17181
Summary: Ref T10978. This currently does almost nothing, but gets it in place so I can add stuff to it.
Test Plan: Made a comment on a commit using the API.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17178
Summary: Ref T10978. The new controller now does everything the old one did, so swap 'em and nuke the old one.
Test Plan: Edited a commit, hit the new controller, things worked real good.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17177
Summary: Ref T10978. The current "Edit" flow has some autoclose info. This isn't necessarily the best place to put it in the long run, but preseve it for now since the documentation refers to it.
Test Plan: {F2340658}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17176
Summary:
Fixes T12097. In D16413, I simplified this code but caused us to load the //commit's// projects instead of the //repository's// projects, which is incorrect.
Normally, commits don't have any project tags when Herald evaluates, so using the commit's projects is generally meaningless.
Test Plan:
- Tagged a repository with `#X`.
- Created a Herald object rule for commits with `#X` as the object ("Always ... do nothing.")
- Ran a commit from the repository.
- Before patch: rule failed to evaluate.
- After patch: rule evaluated and passed.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12097
Differential Revision: https://secure.phabricator.com/D17179
Summary:
Ref T10978. After T11114, we have some features (like the old code for the haunted comment panel) which are only used by Diffusion. I want to modernize it so I can nuke them. T10978 also describes many bugs which are only fixable after modernizing.
This adds very basic EditEngine support for commits/audit. You can't create new commits with this workflow, just tag/update existing ones.
Test Plan: {F2340347}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10978
Differential Revision: https://secure.phabricator.com/D17175
Summary:
Fixes T12087. When transitioning into a clustered configuration for the first time, the documentation recommends using a one-device cluster as a transitional step.
However, installs may not do this for whatever reason, and we aren't as clear as we could be in warning about clusterizing directly into a multi-device cluster.
Roughly, when you do this, we end up believing that working copies exist on several different devices, but have no information about which copy or copies are up to date. //Usually// they all were already synchronized and are all up to date, but we can't make this assumption safely without risking data.
Instead, we err on the side of caution, and require a human to tell us which copy we should consider to be up-to-date, using `bin/repository thaw --promote`.
Test Plan:
```
$ ./bin/repository clusterize rLOCKS --service repos001.phacility.net
Service "repos001.phacility.net" is actively bound to more than one device
(local002.local, local001.phacility.net).
If you clusterize a repository onto this service it will be unclear which
devices have up-to-date copies of the repository. This leader/follower
ambiguity will freeze the repository. You may need to manually promote a
device to unfreeze it. See "Ambiguous Leaders" in the documentation for
discussion.
Continue anyway? [y/N]
```
Read other changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12087
Differential Revision: https://secure.phabricator.com/D17169
Summary: Fixes T12080. This was missing a "/", but stop hard-coding these URIs.
Test Plan: Clicked both links with Quickling as a logged-in and logged-out user, ended up in the right place.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12080
Differential Revision: https://secure.phabricator.com/D17151
Summary:
Fixes T12035. Normally, the "abc" -> "abc/" redirect is handled automatically when "abc" hits a 404.
However, in this case, "source/x" does not 404. We route this to a valid controller because some VCS requests omit the slashes, then manually perform the redirect if we aren't serving a VCS request.
Allow this controller to serve public resources so we can serve the redirect to logged-out users instead of prompting them to login so they can be redirected.
Test Plan: Visited `/source/x` as a logged-out user, where `x` is a public repository.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12035
Differential Revision: https://secure.phabricator.com/D17097
Summary:
Ref T11954. In cluster configurations, we get repository information by making HTTP calls over Conduit.
These are slower than local calls, so clustering imposes a performance penalty. However, we can use futures and parallelize them so that clustering actually improves overall performance.
When not running in clustered mode, this just makes us run stuff inline.
Test Plan:
- Browsed Git, Mercurial and Subversion repositories.
- Locally, saw a 700ms wall time page drop to 200ms.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D17009
Summary:
Ref T11954. Especially with higher-latency file stores like S3, we can spend a lot of time reading README data and then pulling it out of file storage.
Instead, cache it.
Test Plan: Browsed a repostory with a README, saw faster pages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D17002
Summary:
Ref T11954. This is kind of complex and I'm not sure I want to actually land it, but it gives us a fairly good improvement for clustered repositories so I'm leaning toward moving forward.
When we make (or receive) clustered repository requests, we must first load a bunch of stuff out of Almanac to figure out where to send the request (or if we can handle the request ourselves).
This involves several round trip queries into Almanac (service, device, interfaces, bindings, properties) and generally is fairly slow/expensive. The actual data we get out of it is just a list of URIs.
Caching this would be very easy, except that invalidating the cache is difficult, since editing any binding, property, interface, or device may invalidate the cache for indirectly connected services and repositories.
To address this, introduce `PhabricatorCacheEngine`, which is an extensible engine like `PhabricatorDestructionEngine` for propagating cache updates. It has two modes:
- Discover linked objects (that is: find related objects which may need to have caches invalidated).
- Invalidate caches (that is: nuke any caches which need to be nuked).
Both modes are extensible, so third-party code can build repository-dependent caches or whatever. This may be overkill but even if Almanac is the only thing we use it for it feels like a fairly clean solution to the problem.
With `CacheEngine`, make any edit to Almanac stuff propagate up to the Service, and then from the Service to any linked Repositories.
Once we hit repositories, invalidate their caches when Almanac changes.
Test Plan:
- Observed a 20-30ms performance improvement with `ab -n 100`.
- (The main page making Conduit calls also gets a performance improvement, although that's a little trickier to measure directly.)
- Added debugging code to the cache engine stuff to observe the linking and invalidation phases.
- Made invalidation throw; verified that editing properties, bindings, etc, properly invalidates the cache of any indirectly linked repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11954
Differential Revision: https://secure.phabricator.com/D17000
Summary: Ref T929. When viewing a branch, show a few recent differences from the default branch (usually, "master").
Test Plan: {F2079220}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T929
Differential Revision: https://secure.phabricator.com/D16991
Summary: Ref T929. We've made some UI updates since D15330.
Test Plan: {F2079125}
Reviewers: avivey, chad
Reviewed By: chad
Maniphest Tasks: T929
Differential Revision: https://secure.phabricator.com/D16990
Summary:
This shows the commits list only (Actual `git diff` will show up at a later date).
The inputs are left as text-fields, to allow the form to accept anything that can be resolved. The form is GET, to allow sharing URIs.
The conduit method response array is compatible with that of `diffusion.historyquery`, to make it easy to build
the "history" table.
The hardest part here was, of course, Naming. I think "from" and "onto" are unconfusing, and I'm fairly confident that the "to merge"
instructions are in sync with the actual content of the page.
Test Plan: Look at several "compare" views, with various values of "from" and "onto".
Reviewers: #blessed_reviewers!, epriestley
Subscribers: caov297, 20after4, Sam2304, reardencode, baileyb, chad, Korvin
Maniphest Tasks: T929
Differential Revision: https://secure.phabricator.com/D15330
Summary:
Fixes T11940. In 2.11.0, Git has made a change so that newly-pushed changes are held in a temporary area until the hook accepts or rejects them.
This magic temporary area is only readable if the appropriate `GIT_ENVIRONMENTAL_MAGIC` variables are available. When executing `git` commands, pass them through from the calling context.
We're intentionally conservative about which variables we pass, and with good reason (see "httpoxy" in T11359). I think this continues to be the correct default behavior.
Test Plan:
- Upgraded to Git 2.11.0.
- Tried to push over SSH, got a hook error.
- Applied patch.
- Pulled and pushed over SSH.
- Pulled and pushed over HTTP.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11940
Differential Revision: https://secure.phabricator.com/D16988
Summary:
Fixes T11938.
Note that there's a subcase here: if you `hg clone` or `svn checkout` a short `/source/` URI that ends in `.git`, we miss the lookup and don't get this far, so you still get a generic error message.
Hopefully it is clear enough on its own that `proto://.../blah.git` is, in fact, a Git repository, since it says ".git" at the end.
If that doesn't prove to be true, we can be more surgical about this.
Test Plan:
```
$ git clone ssh://local@localvault.phacility.com/source/quack.notgit/
Cloning into 'quack.notgit'...
phabricator-ssh-exec: This repository ("quack.notgit") is not a Git repository. Use "hg" to interact with this repository.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
```
```
$ hg clone ssh://local@localvault.phacility.com/source/phabx
remote: phabricator-ssh-exec: This repository ("phabx") is not a Mercurial repository. Use "git" to interact with this repository.
abort: no suitable response from remote hg!
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11938
Differential Revision: https://secure.phabricator.com/D16976
Summary:
Fixes T11936. After editing a repository URI, we were not correctly updating the URI index.
Any other edit to the repository //would// update the index, and this index is only really used by `arc` to figure out which repository a working copy belongs to, so that's how this evaded detection for this long. In particular, creating a repository would usually have an edit after any URI edits, to activate it, which would build the index correctly.
Test Plan:
- Added a new URI to a repository.
- Verified it was immediately reflected in the `repository_uriindex` table.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11936
Differential Revision: https://secure.phabricator.com/D16972
Summary:
Ref T11044. Few issues here:
- The `PhutilProxyException` is missing an argument (hit this while in read-only mode).
- The `$ref_key` is unused.
- When you add a new master to an existing cluster, we can incorrectly apply `.php` patches which we should not reapply. Instead, mark them as already-applied.
Test Plan:
- Poked this locally, but will initialize `secure004` as an empty master to be sure.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T11044
Differential Revision: https://secure.phabricator.com/D16916
Summary:
Fixes T11902.
- Periods now work in short names.
- If you try to name something ".git", no dice.
Test Plan:
- Tried to name something "quack.git", was politely rejected.
- Named something "quack.notgit", and it worked fine.
- Cloned Mercurial and Git repositories over SSH with ".git" and non-".git" variants without hitting any issues.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11902
Differential Revision: https://secure.phabricator.com/D16908
Summary: See D16851 - there's now a difference in their meaning, so don't unite them in the UI.
Test Plan: Load manage page of repos
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16858
Summary: Fixes T4245. When a repository has a short name, use `/source/shortname/` as its primary URI.
Test Plan:
- Cloned Git repositories from shortnames via HTTP and SSH.
- Cloned Mercurial repositories from shortnames via HTTP and SSH.
- Cloned Subversion repositories from shortnames via SSH.
- Browsed Git, Mercurial and Subversion repositories.
- Added and removed short names to various repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D16851
Summary: Fixes T11839. Both are missing a parameter and one is a copy/paste slop.
Test Plan:
{F1913812}
{F1913813}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11839
Differential Revision: https://secure.phabricator.com/D16837
Summary:
fixes T11792.
There's no good reason any more to have this option, so just drop it.
Test Plan: Load a file, toggle remaining "blame" button. Load search results page and an image too, which are serviced by the same controller.
Reviewers: chad, #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T11792
Differential Revision: https://secure.phabricator.com/D16833
Summary: Ref T11766. When users run `git pull` or similar, log the operation in the pull log.
Test Plan: Performed SSH pulls, got a log in the database. Today, this event log is purely diagnostic and has no UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11766
Differential Revision: https://secure.phabricator.com/D16738
Summary:
Fix typo 'Branches' in the panel header for the Diffusion Actions
management panel.
Test Plan: Saw 'Actions' in the panel heading
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D16654
Ref T11665.
Without `-n 1`, this logs the ENTIRE history of the repository. We
actually get the right result, but this is egregiously slow. Add `-n 1`
to return only one result.
It appears that I wrote this wrong way back in 2011, in D953. This
query is rarely used (until recently) which is likely why it has
escaped notice for so long.
Test Plan: Used Conduit console to execute `diffusion.rawdiffquery`.
Got the same results but spent 8ms instead of 200ms executing this
command, in a very small repository.
Summary:
Ref T11665. Currently, when a repository hits an error, we retry it after 15s. This is correct if the error was temporary/transient/config-related (e.g., bad network or administrator setting up credentials) but not so great if the error is long-lasting (completely bad authentication, invalid URI, etc), as it can pile up to a meaningful amount of unnecessary load over time.
Instead, record how many times in a row we've hit an error and adjust backoff behavior: first error is 15s, then 30s, 45s, etc.
Additionally, when computing the backoff for an empty repository, use the repository creation time as though it was the most recent commit. This is a good proxy which gives us reasonable backoff behavior.
This required removing the `CODE_WORKING` messages, since they would have reset the error count. We could restore them (as a different type of message), but I think they aren't particularly useful since cloning usually doesn't take too long and there's more status information avilable now than there was when this stuff was written.
Test Plan:
- Ran `bin/phd debug pull`.
- Saw sensible, increasing backoffs selected for repositories with errors.
- Saw sensible backoffs selected for empty repositories.
Reviewers: chad
Maniphest Tasks: T11665
Differential Revision: https://secure.phabricator.com/D16575
Summary: Fixes T10155
Test Plan: View an empty repository in diffusion, check for the exception.
See T10155 for steps to reproduce
Reviewers: epriestley
Subscribers:
Summary:
Fixes T11610. Clean up some sketchy old code from long ago.
If you had rules that use conditions like "Accepted revision exists" and ran them in the test console, we'd never load the "CommitData" and fatal.
Instead, load CommitData in `newTestAdapter()` and generally make these pathways a little more modern.
Test Plan:
- Wrote an "Accepted Revision Exists" rule.
- Ran a commit in the test console.
- Before patch, got fatal from T11610.
- After patch, got clean test result.
- Also pushed a commit and reviewed the transcript to make sure the rule ran properly.
Reviewers: joshuaspence, chad
Reviewed By: chad
Maniphest Tasks: T11610
Differential Revision: https://secure.phabricator.com/D16522
Summary:
Fixes T11590. Currently, we incorrectly consider cluster repository versions that are (or were) on devices which are no longer part of the active cluster service when building this status screen.
Instead, ignore them. This is just a display bug; the actual `ClusterEngine` already had similar logic.
Test Plan:
- Added a bad leader record to `repository_workingcopyversion`.
- Before patch, got a bad "Partial (1w)" sync:
{F1802292}
- After patch, got a good "Sycnchronized":
{F1802293}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11590
Differential Revision: https://secure.phabricator.com/D16492
Summary:
Fixes T10423. Ref T11524. This changes `diffusion.rawdiffquery` to return a file PHID instead of a blob of data.
This is better in general, but particularly better for huge diffs (as in T10423) and diffs with non-utf8 data (as in T10423).
Test Plan:
- Used `bin/differential extract` to extract a latin1 diff, got a clean diff.
- Used `bin/repository reparse --herald` to rerun herald on a latin1 diff, got a clean result.
- Pushed latin1 diffs to test commit hooks.
- Triggered the the too large / too slow logic.
- Viewed latin1 diffs in Diffusion.
- Used "blame past this change" in Diffusion to hit the `before` logic.
Reviewers: chad
Reviewed By: chad
Subscribers: eadler
Maniphest Tasks: T10423, T11524
Differential Revision: https://secure.phabricator.com/D16460
Summary:
Ref T11524. Ref T10423. Earlier, I converted `diffusion.filecontentquery` to put the actual file content in Files, then return a PHID for the file, instead of trying to send the content over Conduit.
In T11524, we have a similar set of problems with diffs that contain non-UTF8 data (and, in T10423, diffs that are simply enormous).
I want to provide an API method to do the same sort of thing with diff output (like from `git diff`), so we call the method, it shoves the data in Files, and then we go pull it out of Files.
To support this, take the "shove the output of a Future into Files" logic and put it in a new base `FileFuture` query. This will let me make `RawDiffQuery` share the logic more easily.
Test Plan: Browsed Diffusion, ran `diffusion.filecontentquery` to fetch file content.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10423, T11524
Differential Revision: https://secure.phabricator.com/D16458
Summary:
Ref T11522. This tries to reduce the cost of rewriting a repository by making handles smarter about rewritten commits.
When a handle references an unreachable commit, try to load a rewrite hint for the commit. If we find one, change the handle name to "OldHash > NewHash" to provide a strong hint that the commit was rewritten and that copy/pasting the old hash (say, to the CLI) won't work.
I think this notation isn't totally self-evident, but users can click it to see the big error message on the page, and it's at least obvious that something weird is going on, which I think is the important part.
Some possible future work:
- Not sure this ("Recycling Symbol") is the best symbol? Seems sort of reasonable but mabye there's a better one.
- Putting this information directly on the hovercard could help explain what this means.
Test Plan: {F1780719}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16437
Summary:
Ref T11522. When a commit is no longer reachable from any branch/tag, we currently show a "this has been deleted" message.
Instead, go further: check if there is a "rewritten" hint pointing at a commit the current commit was rewritten into. If we find one, show a message about that instead.
(This isn't super pretty, just getting it working for now. I expect to revisit this UI in T9713 if we don't get to it before that.)
Test Plan: {F1780703}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16436
Summary: Ref T11522. This migrates any "badcommit" data (which probably only exists at Facebook and on 1-2 other installs in the wild) to the new "hint" table.
Test Plan:
- Wrote some bad commit annotations to the badcommit table.
- Viewed them in the web UI and used `bin/repository reparse --change ...` to reparse them. Saw "this is bad" messages.
- Ran migration, verified that valid "badcommit" rows were successfully migrated to become "hint" rows.
- Viewed the new web UI and re-parsed the change, saw "unreadable commit" messages.
- Viewed a good commit; reparsed a good commit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16435
Summary:
Ref T11522. This provides storage for tracking rewritten commits (new feature) and unreadable commits (existing feature, but really hacky).
This doesn't do anything yet, just adds a table and a CLI tool for updating it. I'll document the tool once it works. You just pipe in some JSON, but I need to document the format.
Test Plan:
- Piped JSON for "none", "rewritten" and "unreadable" hints into `bin/repository hint`.
- Examined the database to see that the table was written properly.
- Tried to pipe bad JSON in, invalid hint types, etc. Got reasonable human-readable error messages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11522
Differential Revision: https://secure.phabricator.com/D16434
