Summary: Depends on D19087. Ref T13079. This still doesn't feel like the most clean, general system in the world, but is a step forward from hard-coded `switch()` stuff.
Test Plan:
- Jumped to `r`.
- Jumped to `a`.
- Jumped to `r poe` (multiple results).
- Jumped to `r poetry` (one result).
- Jumped to `r syzygy` (no results).
- Jumped to `p`.
- Jumped to `p robot` (multiple results); `p assessment` (one result).
- The behavior for `p <string>` has changed slightly but should be more powerful now (it's consistent with `r <string>`).
- Jumped to `s <symbol>` and `s <context>-><symbol>`.
- Jumped to `d`.
- Jumped to `f`.
- Jumped to `t`.
- Jumped to `T123`, `D123`, `@dog`, `PHID-DREV-abcd`, etc.
Maniphest Tasks: T13079
Differential Revision: https://secure.phabricator.com/D19088
Summary: Ref T13079. This recently-introduced Engine/EngineExtension are a good fit for adding more datasource functions in general, but we didn't think quite big enough in naming them.
Test Plan: Used quick search typeahead, hit applications/users/monograms/symbols/etc.
Maniphest Tasks: T13079
Differential Revision: https://secure.phabricator.com/D19087
Summary:
Depends on D19084. Fixes T13078. When `phabricator.silent` is enabled, immediately fail the "HTTP Request", "CircleCI" and "Buildkite" build steps.
This doesn't feel quite as clean as most of the other behavior of `phabricator.silent`, since these calls are not exactly notifications in the same way that email is, and failing to make these calls means that builds run differently (whereas failing to deliver email doesn't really do anything).
However, I suspect that this behavior is almost always reasonable/correct, and that we can probably get away with it until this grey area between "notifications" and "external service calls" is more clearly defined.
Test Plan:
- Created a build with HTTP, CircleCI, and Buildkite steps.
- Put install in `phabricator.silent` mode: all three steps failed with "declining, because silent" messages.
- Put install back in normal mode: all three steps made HTTP requests.
- Read updated documentation.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13078
Differential Revision: https://secure.phabricator.com/D19085
Summary: Ref T13078. The `phabricator.silent` configuration flag should disable webhook calls, since this is consistent with the documented and desired behavior.
Test Plan: Enabled `phabricator.silent`, made test hook calls, saw them fail with a "silent" failure reason.
Maniphest Tasks: T13078
Differential Revision: https://secure.phabricator.com/D19084
Summary: Revisions with blocking reviewers had this stamp built incorrectly, which cascaded into trying to use `array()` as a PHID. Recover so these tasks succeed.
Test Plan: Will deploy production.
Differential Revision: https://secure.phabricator.com/D19082
Summary:
Depends on D19078. Ref T13073. Currently, there is a narrow window where we can acquire a resource after a reclaim has started against it.
To prevent this, briefly lock resources before acquiring them and make sure they're still good. If a resource isn't good, throw the lease back in the pool.
Test Plan:
This is tricky. You need:
- Hoax blueprint with limits and a rule where leases of a given "flavor" can only be satisfied by resources of the same flavor.
- Reduce the 3-minute "wait before resources can be released" to 3 seconds.
- Limit Hoaxes to 1.
- Allocate one "cherry" flavored Hoax and release the lease.
- Add a `sleep(15)` to `releaseResource()` in `DrydockResourceUpdateWorker`, after the `canReclaimResource()` check, with a `print`.
Now:
- Run `bin/phd debug task` in two windows.
- Run `bin/drydock lease --type host --attributes flavor=banana` in a third window.
- This will start to reclaim the existing "cherry" resource. Once one of the `phd` windows prints the "RECLAIMING" message run `bin/drydock lease --type host --attributes flavor=cherry` in a fourth window.
- Before patch: the "cherry" lease acquired immediately, then was released and destroyed moments later.
- After patch: the "cherry" lease yields.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19080
Summary:
Depends on D19077. Ref T13073. When we're using slot locks to enforce a limit (e.g., maximum of 5 simultaneous things) we currently load locks owned by the blueprint to identify which slots are likely to be free.
However, this isn't right: the blueprint doesn't own these locks. The resources do.
We still get the right behavior eventually, but we incorrectly identify that every slot lock is always free, so as the slots fill up we'll tend to guess wrong more and more often.
Instead, load the slot locks by name explicitly.
Test Plan: Implemented lock-based limiting on `HoaxBlueprint`, `var_dump()`'d the candidate locks, saw correct test state for locks. Acquired leases without releasing, got all of the slots filled without any slot lock collisions (previously, the last slot or two tended to collide a lot).
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19078
Summary:
Depends on D19076. Ref T13073. Blueprints are stored as an attribute and `setAttributes()` overwrites all attributes.
This is sorta junk but make it less obviously broken, at least.
Test Plan: Ran `bin/drydock lease --type working-copy --attributes x=y` without instantly getting a fatal about "no blueprint PHIDs".
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19077
Summary:
Depends on D19075. Ref T13073. If a lease acquires a resource but finds that the resource builds directly into a dead state (which can happen for any number of reasonable reasons), reset the lease and throw it back in the pool.
This isn't the lease's fault and it hasn't caused any side effects or done anything we can't undo, so we can safely reset it and throw it back in the pool.
Test Plan:
- Created a blueprint which throws from `allocateResource()` so that resources never activate.
- Tried to lease it with `bin/drydock lease ...`.
- Before patch: lease was broken and destroyed after a failed activation.
- After patch: lease was returned to the pool after a failed activation.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19076
Summary: Ref T13073. Depends on D19074. Update icons and UI for resource status.
Test Plan: Viewed resources in detail view and list view, saw better status icons.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19075
Summary:
Depends on D19073. Ref T13073. Give leases a normal header tag and try to wrangle their status constants a bit.
Also, try to capture the "status class" pattern a bit. Since we target PHP 5.2.3 we can't use `static::` so the actual subclass is kind of a mess. Not exactly sure if I want to stick with this or not. We could consider targeting PHP 5.3.0 instead to get `static::` / late static binding.
Test Plan: Viewed leases and lease lists, saw better and more conventional status information.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19074
Summary:
Depends on D19072. Ref T13073. Currently, you can leave leases stranded by using `^C` to interrupt the script. Handle signals and release leases on destruction if they haven't activated yet.
Also, print out more useful information before and after activation.
Test Plan: Mashed ^C while runnning `bin/drydock lease ... --trace`, saw the lease release.
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19073
Summary: Depends on D19071. Ref T13073. While the daemons are supposedly doing things, show the user any logs they generate. There's often something relevant but unearthing it can be involved.
Test Plan: {F5427773}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19072
Summary: Depends on D19070. Ref T13073. Some messages contain an interesting story or a clever anecdote. Respect newlines during rendering to preserve authorial intent.
Test Plan:
Viewed a message with linebreaks and could still read it.
{F5427754}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19071
Summary:
Ref T13073. When a Blueprint says it will be able to allocate a resource but then throws an exception while attempting that allocation, we currently fail the lease permanently.
This is excessively harsh. This blueprint may have the best of intentions and have encountered a legitimately unforseeable failure (like a `vm.new` call to build a VM failed) and be able to succeed in the future.
Even if this blueprint is a dirty liar, other blueprints (or existing resources) may be able to satisfy the lease in the future.
Even if every blueprint is implemented incorrectly, leaving the lease alive lets it converge to success after the blueprints are fixed.
Instead of failing, log the issue and yield.
(In the future, it might make sense to distinguish more narrowly between "actually, all the resources are used up" and all other failure types, since the former is likely more routine and less concerning.)
Test Plan:
- Wrote a broken `Hoax` blueprint which always claims it can allocate but never actually allocates (just `throw` in `allocateResource()`).
- Used `bin/phd drydock lease` to acquire a Hoax lease.
- Before patch: lease abruptly failed permanently.
- After patch: lease yields after allocation fails.
{F5427747}
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13073
Differential Revision: https://secure.phabricator.com/D19070
Summary: Like "Commit Hook" rules, these also fire oddly and don't have an object PHID or a list of transactions.
Test Plan: Verified that "Call Webhooks" was no longer available from Diff rules, but still available from other rule types.
Differential Revision: https://secure.phabricator.com/D19069
Summary:
See PHI346. Ref T13054. If you have prototypes enabled on the server but use `master` / `stable` on the client and run `arc diff --plan-changes`, the transition is rejected because "Draft -> Changes Planned" isn't currently a legal transition.
Allow this transition if not coming from the web UI (to keep it out of the dropdown).
Test Plan:
- Ran `arc diff --plan-changes` on `master`, got a "Changes Planned" revision instead of a validation error.
- Ran `arc diff` without `--plan-changes`, got a draft, verified that "Plan Changes" still doesn't appear in the action dropdown.
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19067
Summary:
Depends on D19065. Ref T13054. Instead of just updating `containerPHID` and hoping for the best, queue a proper BuildWorker to process a "your container has changed, update it" message.
We also need to remove a (superfluous) `withContainerPHIDs()` when loading active diffs for a revision.
Test Plan:
- Without daemons, created a revision and saw builds stick in "preparing" with no container PHID, but also stay in draft mode.
- With daemons, saw builds actually build and get the right container PHID.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19066
Summary:
Depends on D19064. Ref T13054. See that task for additional discussion.
When buildables are created by `arc` and have lint/unit messages, they can currently pass or fail before Herald triggers actual builds. This puts them in a pre-build state where they can't complete until Herald says it's okay.
On its own, this change intentionally strands `arc diff --only` diffs in the "PREPARING" stage forever.
Test Plan:
- Ran a build with `bin/harbormaster`, saw it build normally.
- Ran a build with web UI, saw it build normally.
- Ran a build with `arc diff`, saw it build normally.
- Ran a build with `arc diff --only`, saw it hang in "PREPARING" forever.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19065
Summary: Depends on D19063. Ref T13054. Prepare for the addition of a new `PREPARING` status by getting rid of the "scattered mess of switch statements" pattern of status management.
Test Plan: Searched/browsed buildables. Viewed buildables. Viewed revisions. Grepped for all affected symbols.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19064
Summary: Ref T13054. Companion storage change for D19062.
Test Plan: Applied migration and adjustments. Viewed messages in Harbormaster; created them with `harbormaster.sendmessage`; processed them with `bin/phd debug task`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054
Differential Revision: https://secure.phabricator.com/D19063
Summary:
See T13054. This prepares for Buildables to be sent messages ("attach", "done scheduling builds") to fix races between Harbormaster and Differential.
The `buildTargetPHID` is replaced with a `recipientPHID` in the API. An additional change will fix the storage.
In the future, this table could probably also replace `HarbormasterBuildCommand` now, which is approximately the same bus, but for Builds.
Test Plan: Viewed builds with messages. Sent messages with `harbormaster.sendmessage`. Processed messages with `bin/phd debug task`.
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D19062
Summary: Fixes T13071. See that task for discusison. I think this `<= version` constraint is needless in normal cases (it should match everything in the table anyway), and slightly harmful in bizarre cases where a draft somehow gets a much larger ID than it should have.
Test Plan:
- Gave a draft an unreasonably large ID.
- Pre-patch, observed: submitting comments on the draft's object does not clear the draft.
- Post-patch: submitting comments on the draft's object now clears the draft correctly.
- Also added comments/actions, reloaded pages, saw drafts stick properly.
Maniphest Tasks: T13071
Differential Revision: https://secure.phabricator.com/D19060
Summary: Ref T13054. Fixes T12714. Applies read locks to all transactions instead of only a very select subset (chat messages in Conpherence).
Test Plan: See <T13054#235650> for discussion and testing.
Maniphest Tasks: T13054, T12714
Differential Revision: https://secure.phabricator.com/D19059
Summary: Depends on D19056. Fixes T8475. Ref T13054. Merges "ModernHunk" back into "Hunk".
Test Plan: Grepped for `modernhunk`. Reviewed revisions. Created a new revision. Used `bin/differential migrate-hunk` to migrate hunks between storage formats and back.
Maniphest Tasks: T13054, T8475
Differential Revision: https://secure.phabricator.com/D19057
Summary: Ref T13054. Ref T8475. This table has had no readers or writers for more than a year after it was migrated to the modern table.
Test Plan: Ran migration, verified that all the data was still around.
Maniphest Tasks: T13054, T8475
Differential Revision: https://secure.phabricator.com/D19056
Summary:
Ref T13054. Fixes T10746. Fixes T11154. This is really a one-line fix (include `ABORTED` in `BuildEngine->updateBuildable()`) but try to structure the code a little more clearly too and reduce (at least slightly) the number of random lists of status attributes spread throughout the codebase.
Also add a header tag for buildable status.
Test Plan: Aborted a build, saw buildable fail properly.
Subscribers: yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T13054, T11154, T10746
Differential Revision: https://secure.phabricator.com/D19055
Summary: See PHI358. The `bin/almanac [un]trust-key` workflows don't properly purge the SSH key cache, but should.
Test Plan:
- Added key `ssh-rsa xyz` to a device.
- Used `bin/ssh-auth | grep xyz` to test for the presence of the key.
- Before patch: Saw it not present, trusted it, saw it still not present.
- After patch: Saw it not present, trusted it, saw it now present. Untrusted it, saw it no longer present.
Differential Revision: https://secure.phabricator.com/D19053
Summary:
Fixes T6121. See PHI357.
- Allow emoji and other unicode (like Chinese characters) as long as you have at least three of them.
- Disallow macros with only latin symbols. These were previously allowed.
Test Plan: Created a macro for "🐶🐶🐶", then used it in a comment.
Maniphest Tasks: T6121
Differential Revision: https://secure.phabricator.com/D19051
Summary: Depends on D19049. Ref T11330. Adds some documentation for webhooks.
Test Plan: Read the documentation and found it to be exceptionally accurate and helpful.
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19050
Summary: Depends on D19048. Fixes T11330.
Test Plan: Wrote rules to call webhooks selectively, saw them fire appropriately with correct trigger attribution.
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19049
Summary: Depends on D19047. Ref T11330. Triggers every firehose hook on every edit; prepares for Herald triggers.
Test Plan: Configured a firehose hook, edited some objects, saw callbacks.
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19048
Summary: Depends on D19046. Ref T11330. Supports querying for specific transactions while responding to webhooks.
Test Plan: Called `transaction.search` with and without PHID constraints.
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19047
Summary:
Depends on D19045. Ref T11330.
- View/regenerate HMAC keys.
- Pretty JSON.
- Readable status transactions.
- test, silent, secure flags.
- Dates on request view.
- More icons.
- Can test any object.
- GC for requests.
Test Plan: Went through each feature poking at it in the web UI and with `bin/webhook call ...` / `bin/garbage collect ...`.
Subscribers: ftdysa
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19046
Summary: Ref T11330. Adds general support for webhooks. This is still rough and missing a lot of pieces -- and not yet useful for anything -- but can make HTTP requests.
Test Plan: Used `bin/webhook call ...` to complete requests to a test endpoint.
Maniphest Tasks: T11330
Differential Revision: https://secure.phabricator.com/D19045
Summary: I made the red stronger (always visible, not just a hover state) for the "Mute" feature, but this made Logout look a little intense. Just make it normal-colored, logging out isn't a big deal.
Test Plan: No longer saw bright red logout action in profile dropdown menu.
Differential Revision: https://secure.phabricator.com/D19044
Summary: Ref T12677. Skip these checks if we're doing the new stuff. Also, allow priority to be unspecified.
Test Plan: Will deploy.
Maniphest Tasks: T12677
Differential Revision: https://secure.phabricator.com/D19043
Summary: See PHI356. Adds inline comment and done counts to the filetree. Also makes the filetree wider by default.
Test Plan: Fiddled with filetrees in different browsers on different revisions. Added inlines, marked them done/undone.
Differential Revision: https://secure.phabricator.com/D19041
Summary: See PHI356. Makes it easier to pick out change types in the filetree view in Differential.
Test Plan: Created a diff with adds, copies, moves, deletions, and binary files. Viewed in Differential, had an easier time picking stuff out.
Differential Revision: https://secure.phabricator.com/D19040
Summary: Depends on D19038. Fixes T4434. Updates the SearchEngine and Query to handle these fields.
Test Plan: Filtered and ordered by date and closer.
Maniphest Tasks: T4434
Differential Revision: https://secure.phabricator.com/D19039
Summary:
Depends on D19037. Ref T4434. Adds closed date to `maniphest.search` and "Export Data".
When a task has been closed, show the closed date with a checkmark in the UI instead of the modified date.
Test Plan:
- Exported data to CSV, saw close information.
- Saw close information in `/maniphest/`.
- Queried for close information via `maniphest.search`.
Maniphest Tasks: T4434
Differential Revision: https://secure.phabricator.com/D19038
Summary:
Ref T4434. Although some of the use cases for this data are better fits for Facts, this data is reasonable to track separately.
I have an approximate view of it already ("closed, ordered by date modified") that's useful to review things that were fixed recently. This lets us make that view more effective.
This just adds (and populates) the storage. Followups will add Conduit, Export, Search, and UI support.
This is slightly tricky because merges work oddly (see T13020).
Test Plan:
- Ran migration, checked database for sensible results.
- Created a task in open/closed status, got the right database values.
- Modified a task to close/open it, got the right values.
- Merged an open task, got updates.
Maniphest Tasks: T4434
Differential Revision: https://secure.phabricator.com/D19037
Summary:
See D18176. This query has no effect (other than wasting resources) and the result is unused.
`$repository` already has the URI loaded because we load them unconditionally during request initialization.
Test Plan: Viewed repository URIs.
Subscribers: jmeador
Differential Revision: https://secure.phabricator.com/D19036
Summary: Ref T13053. See PHI126. Add an explicit "Mute" action to kill mail and notifications for a particular object.
Test Plan: Muted and umuted an object while interacting with it. Saw mail route appropriately.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19033
Summary:
Ref T13053. Fixes T7804. Adds "Acting user" so you can have "always email me" stuff skip things you did or keep an eye on suspicious interns.
For the test console, the current user is the acting user.
For pushes, the pusher is the acting user.
Test Plan: Wrote acting user rules, triggered them via test console and via multiple actors on real objects.
Maniphest Tasks: T13053, T7804
Differential Revision: https://secure.phabricator.com/D19031
Summary: Fixes T10189. Ref T13053. We haven't sent these headers in a very long time. Briefly mention the new stamps header instead, although I expect to integrate stamp documentation into the UI in a more cohesive way in the future.
Test Plan: Read documentation.
Maniphest Tasks: T13053, T10189
Differential Revision: https://secure.phabricator.com/D19030
Summary: Depends on D19028. Ref T13053. Fixes T6576. An HTML body was built here, but not passed to the actual mail message.
Test Plan: Will verify production push mail.
Maniphest Tasks: T13053, T6576
Differential Revision: https://secure.phabricator.com/D19029
Summary: Ref T13053. Some mail (like push notification mail) doesn't currently generate any stamps. Drop this section if there aren't any stamps on the mail.
Test Plan: Will check push mail in production.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19028
Summary: Ref T13053. Uses the changes in D19026 to escape mail addresses. Those rules may not be right yet, but they're at least all in one place, have test coverage, and aren't obviously incorrect.
Test Plan: Will vet this more extensively when re-testing all mailers.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19027
Summary:
Ref T13053. Postmark support recommends testing requests against a whitelist of known remote addresses to determine request authenticity. Today, the list can be found here:
<https://postmarkapp.com/support/article/800-ips-for-firewalls>
This is potentially less robust than, e.g., HMAC verification, since they may need to add new datacenters or support IPv6 or something. Users might also have weird network topologies where everything is proxied, and this makes testing/simulating more difficult.
Allow users to configure the list so that they don't need to hack things apart if Postmark adds a new datacenter or remote addresses are unreliable for some other reason, but ship with safe defaults for today.
Test Plan:
Tried to make local requests, got kicked out. Added `0.0.0.0/0` to the list, stopped getting kicked out.
I don't have a convenient way to route real Postmark traffic to my development laptop with an authentic remote address so I haven't verified that the published remote address is legitimate, but I'll vet that in production when I go through all the other mailers.
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19025
Summary:
See support email. There's nothing tricky here, we were just missing a check. The different parts of this got built at different times so I think this was simply overlooked.
Also add a redundant check just to future-proof this and be on the safe side.
Test Plan: Used `bin/phortune invoice` to charge a pact subscription. After deleting the card, the charge failed with an appropriate error.
Reviewers: amckinley
Differential Revision: https://secure.phabricator.com/D19020
Summary:
Depends on D19021. Ref T13053. When you "Subscribe", or make some other types of edits, we don't necessarily have reviewer data, but may now need it to do the new recipient list logic.
I don't have a totally clean way to deal with this in the general case in mind, but just load it for now so that things don't fatal.
Test Plan: Subscribed to a revision with the "Subscribe" action.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19022
Summary:
Depends on D19019. Ref T13053. Fixes T12689. See PHI178.
Currently, if `@alice` resigns from a revision but `#alice-fan-club` is still a subscriber or reviewer, she'll continue to get mail. This is undesirable.
When users are associated with an object but have explicitly disengaged in an individal role (currently, only resign in audit/differential) mark them "unexpandable", so that they can no longer be included through implicit membership in a group (a project or package).
`@alice` can still get mail if she's a explicit recipient: as an author, owner, or if she adds herself back as a subscriber.
Test Plan:
- Added `@ducker` and `#users-named-ducker` as reviewers. Ducker got mail.
- Resigned as ducker, stopped getting future mail.
- Subscribed explicitly, got mail again.
- (Plus some `var_dump()` sanity checking in the internals.)
Reviewers: amckinley
Maniphest Tasks: T13053, T12689
Differential Revision: https://secure.phabricator.com/D19021
Summary:
Depends on D19018. Fixes T4776. Ref T13053. When you remove someone from an object's recipient list (for example, by removing them a reviewer, auditor, subscriber, owner or author) we currently do not send them mail about it because they're no longer connected to the object.
In many of these cases (Commandeer, Reassign) the actual action in the UI adds them back to the object somehow (as a reviewer or subscriber, respectively) so this doesn't actually matter. However, there's no recovery mechanism for reviewer or subscriber removal.
This is slightly bad from a policy/threat viewpoint since it means an attacker can remove all the recipients of an object "somewhat" silently. This isn't really silent, but it's less un-silent than it should be.
It's also just not very good from a human interaction perspective: if Alice removes Bob as a reviewer, possibly "against his will", he should be notified about that. In the good case, Alice wrote a nice goodbye note that he should get to read. In the bad case, he should get a chance to correct the mistake.
Also add a `removed(@user)` mail stamp so you can route these locally if you want.
Test Plan:
- Created and edited some different objects without catching anything broken.
- Removed subscribers from tasks, saw the final email include the removed recipients with a `removed()` stamp.
I'm not totally sure this doesn't have any surprising behavior or break any weird objects, but I think anything that crops up should be easy to fix.
Reviewers: amckinley
Subscribers: sophiebits
Maniphest Tasks: T13053, T4776
Differential Revision: https://secure.phabricator.com/D19019
Summary:
Depends on D19017. Fixes T12491. Ref T13053. After SES threw us in the dungeon for sending mail to a spamtrap we changed outbound mail rules to stop sending to unverified addresses, except a small amount of registration mail which we can't avoid.
However, we'll still reply to random inbound messages with a helpful error, even if the sender is unverified.
Instead, only send exception mail back if we know who the sender is.
Test Plan: Processed inbound mail with `scripts/mail/mail_handler.php`. No more outbound mail for "bad address", etc. Still got outbound mail for "unknown command !quack".
Reviewers: amckinley
Maniphest Tasks: T13053, T12491
Differential Revision: https://secure.phabricator.com/D19018
Summary: Depends on D19016. Ref T13053. Adds a listener for the Postmark webhook.
Test Plan:
Processed some test mail locally, at least:
{F5416053}
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19017
Summary:
Depends on D19015. Ref T13053. Currently, we don't link up hyperlinks in the body of mail viewed in the web UI. We should, but this is a little tricky (see T13053#235074).
As a general improvement to make working with "Must Encrypt" mail less painful, add a big button to jump to the related object.
Test Plan: {F5415990}
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19016
Summary: Depends on D19014. Ref T13053.
Test Plan: Used `./bin/mail show-outbound --id <id> --dump-html > out.html && open out.html` to look at HTML mail, saw smaller, lighter stamp text with better spacing.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19015
Summary:
Depends on D19013. Ref T13053. When mail is marked "Must Encrypt", we normally do not include recipient information.
However, when `metamta.one-mail-per-recipient` is disabled, the recipient list will leak in the "To" and "Cc" headers. This interaction is probably not very surprising, but document it explicitly for completeness.
(Also use "Mail messages" instead of "Mails".)
Test Plan: Read documentation in the "Config" application.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19014
Summary:
Depends on D19012. Ref T13053. In D19012, I've changed "Thread-Topic" to always use PHIDs.
This change drops the selective on-object storage we have to track the original, human-readable title for objects.
Even if we end up backing out the "Thread-Topic" change, we'd be better off storing this in a table in the Mail app which just has `<objectPHID, first subject we used when sending mail for that object>`, since then we get the right behavior without needing every object to have this separate field.
Test Plan: Grepped for `original`, `originalName`, `originalTitle`, etc.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19013
Summary:
Depends on D19009. Ref T13053. For "Must Encrypt" mail, we must currently strip the "Thread-Topic" header because it sometimes contains sensitive information about the object.
I don't actually know if this header is useful or anyting uses it. My understanding is that it's an Outlook/Exchange thing, but we also implement "Thread-Index" which I think is what Outlook/Exchange actually look at. This header may have done something before we implemented "Thread-Index", or maybe never done anything. Or maybe older versions of Excel/Outlook did something with it and newer versions don't, or do less. So it's possible that an even better fix here would be to simply remove this, but I wasn't able to convince myself of that after Googling for 10 minutes and I don't think it's worth hours of installing Exchange/Outlook to figure out. Instead, I'm just trying to simplify our handling of this header for now, and maybe some day we'll learn more about Exchange/Outlook and can remove it.
In a number of cases we already use the object monogram or PHID as a "Thread-Topic" without users ever complaining, so I think that if this header is useful it probably isn't shown to users, or isn't shown very often (e.g., only in a specific "conversation" sub-view?). Just use the object PHID (which should be unique and stable) as a thread-topic, everywhere, automatically.
Then allow this header through for "Must Encrypt" mail.
Test Plan: Processed some local mail, saw object PHIDs for "Thread-Topic" headers.
Reviewers: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19012
Summary: Depends on D19007. Ref T12677.
Test Plan: Used `bin/mail send-test ... --mailer postmark` to deliver some mail via Postmark.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12677
Differential Revision: https://secure.phabricator.com/D19009
Summary: Depends on D19006. Ref T13053. Ref T12677. When multiple mailers are configured but one or more fail, test that we recover (or don't) appropriately.
Test Plan: Ran unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19007
Summary: Depends on D19005. Ref T12677. Ref T13053. Tests that turning `cluster.mailers` into an actual list of mailers more or less works as expected.
Test Plan: Ran unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19006
Summary:
Depends on D19004. Ref T13053. Ref T12677. If the new `cluster.mailers` is configured, make use of it. Also use it in the Sengrid/Mailgun inbound stuff.
Also fix a bug where "Must Encrypt" mail to no recipients could fatal because no `$mail` was returned.
Test Plan: Processed some mail locally. The testing on this is still pretty flimsy, but I plan to solidify it in an upcoming change.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19005
Summary:
Depends on D19003. Ref T12677. Ref T13053. For the first time, we're requiring CLI configuration of a complex value (not just a string, integer, bool, etc) to do something fairly standard (send mail).
Users sometimes have very reasonable difficulty figuring out how to `./bin/config set key <some big JSON mess>`. Provide an easy way to handle this and make sure it gets appropriate callouts in the documentation.
(Also, hide the `cluster.mailers` value rather than just locking it, since it may have API keys or SMTP passwords.)
Test Plan: Read documentation, used old and new flags to set configuration.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19004
Summary:
Depends on D19002. Ref T13053. Ref T12677. Adds a new option to allow configuration of multiple mailers.
Nothing actually uses this yet.
Test Plan: Tried to set it to various bad values, got reasonable error messages. Read documentation.
Reviewers: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19003
Summary:
Depends on D19000. Ref T13053. Ref T12677. Currently, most mailers are configured with a bunch of `<mailer>.setting-name` global config options.
This means that you can't configure two different SMTP servers, which is a reasonable thing to want to do in the brave new world of mail failover.
It also means you can't configure two Mailgun accounts or two SES accounts. Although this might seem a little silly, we've had more service disruptions because of policy issues / administrative error (where a particular account was disabled) than actual downtime, so maybe it's not completely ridiculous.
Realign mailers so they can take configuration directly in an explicit way. A later change will add new configuration to take advantage of this and let us move away from having ~10 global options for this stuff eventually.
(This also makes writing third-party mailers easier.)
Test Plan:
Processed some mail, ran existing unit tests. But I wasn't especially thorough.
I expect later changes to provide some tools to make this more testable, so I'll vet each provider more thoroughly and add coverage for multiple mailers after that stuff is ready.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D19002
Summary:
Depends on D18998. Ref T13053. When we send "Must Encrypt" mail, we currently send it with a normal "From" address.
This discloses a little information about the object (for example, if the Director of Silly Walks is interacting with a "must encrypt" object, the vulnerability is probably related to Silly Walks), so anonymize who is interacting with the object.
Test Plan: Processed some mail. (The actual final "From" is ephemeral and a little tricky to examine and I didn't actually transmit mail over the network, but it should be obvious if this works or not on `secure`.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D19000
Summary:
Ref T13053. Ref T12677. This restructures the calls and error handling logic so that we can pass in a list of multiple mailers and get retry logic.
This doesn't actually ever use multiple mailers yet, and shouldn't change any behavior. I'll add multiple-mailer coverage a little further in, since there's currently no way to effectively test which of several mailers ended up transmitting a message.
Test Plan:
- This has test coverage; tests still pass.
- Poked around locally doing things that send mail, saw mail appear to send. I'm not attached to a real mailer though so my confidence in local testing is only so-so.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053, T12677
Differential Revision: https://secure.phabricator.com/D18998
Summary:
This command also needs a "." instead of an empty string now.
(This powers the file browser typeahead in Diffusion.)
Test Plan: Will test in production since there's still no easy 2.16 installer for macOS.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D19010
Summary:
Ref T13053. When you mention one object on another (or link two objects together with an action like "Edit Parent Revisions"), we write a transaction on each side to add the "alice added subtask X" and "alice added parent task Y" items to the timeline.
This behavior now causes problems in T13053 with the "Must Encrypt" flag because it prevents the flag from being applied to the corresponding "inverse edge" mail.
This was added in rP5050389f as a quick workaround for a fatal related to Editors not having enough data to apply Herald on mentions. However, that was in 2014, and since then:
- Herald got a significant rewrite to modularize all the rules and adapters.
- Editing got a significant upgrade in EditEngine and most edit workflows now operate through EditEngine.
- We generally do more editing on more pathways, everything is more modular, and we have standardized how data is loaded to a greater degree.
I suspect there's no longer a problem with just running Herald here, and can't reproduce one. If anything does crop up, it's probably easy (and desirable) to fix it.
This makes Herald fire a little more often: if someone writes a rule, mentioning or creating a relationship to old tasks will now make the rule act. Offhand, that seems fine. If it turns out to be weird, we can probably tailor Herald's behavior.
Test Plan:
I wasn't able to break anything:
- Mentioned a task on another task (original issue).
- Linked tasks with commits, mocks, revisions.
- Linked revisions with commits, tasks.
- Mentioned users, revisions, and commits.
- Verified that mail generated by creating links (e.g., Revision > Edit Tasks) now gets the "Must Encrypt" flag properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18999
Summary:
Ref T13053. Adds revision stamps (status, reviewers, etc). Adds Herald rule stamps, like the existing X-Herald-Rules header.
Removes the "self" stamps, since you can just write a rule against `whatever(@epriestley)` equivalently. If there's routing logic around this, it can live in the routing layer. This avoids tons of self-actor, self-mention, self-reviewer, self-blocking-reviewer, self-resigned-reviewer, etc., stamps.
Use `natcasesort()` instead of `sort()` so that numeric values (like monograms) sort `9, 80, 700` instead of `700, 80, 9`.
Remove the commas from rendering since they don't really add anything.
Test Plan: Edited tasks and revisions, looked at mail stamps, saw stamps that looked pretty reasonable (with no more self stuff, no more commas, sorting numbers, and Herald stamps).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18997
Summary: Ref T13053. Adds more mail tags with information available on the Editor object.
Test Plan: Banged around in Maniphest, viewed the resulting mail, all the stamps seemed to align with reality.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18995
Summary:
Ref T13053. Because I previously misunderstood what "multiplex" means, I used it in various contradictory and inconsistent ways.
We can send mail in two ways: either one mail to everyone with a big "To" and a big "Cc" (not default; better for mailing lists) or one mail to each recipient with just them in "To" (default; better for almost everything else).
"Multiplexing" is combining multiple signals over a single channel, so it more accurately describes the big to/cc. However, it is sometimes used to descibe the other approach. Since it's ambiguous and I've tainted it through misuse, get rid of it and use more clear language.
(There's still some likely misuse in the SMS stuff, and a couple of legitimate uses in other contexts.)
Test Plan: Grepped for `multiplex`, saw less of it.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18994
Summary:
Ref T10448. Currently, we use "mail tags" (in {nav Settings > Email Preferences}) to give users some ability to route mail. There are a number of major issues with this:
- It isn't modular and can't be extended by third-party applications.
- The UI is a giant mess of 5,000 individual settings.
- Settings don't map clearly to actual edits.
- A lot of stuff isn't covered by any setting.
This adds a new system, called "mail stamps", which is similar to "mail tags" but tries to fix all these problems.
I called these "stamps" because: stamps make sense with mail; we can't throw away the old system just yet and need to keep it around for a bit; we don't use this term for anything else; it avoids confusion with project tags.
(Conceptually, imagine these as ink stamps like "RETURN TO SENDER" or "FRAGILE", not actual postage stamps.)
The only real "trick" here is that later versions of this will need to enumerate possible stamps for an object and maybe all possible stamps for all objects in the system. This is why stamp generation is separated into a "template" phase and a "value" phase. In future changes, the "template" phase can be used on its own to generate documentation and typeaheads and let users build rules. This may need some more refinement before it really works since I haven't built any of that yet.
Also adds a preference for getting stamps in the header only (default) or header and body (better for Gmail, which can't route based on headers).
Test Plan:
Fiddled with preference, sent some mail and saw a "STAMPS" setting in the body and an "X-Phabricator-Stamps" header.
{F5411694}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10448
Differential Revision: https://secure.phabricator.com/D18991
Summary:
Ref T13048. See <https://discourse.phabricator-community.org/t/configuring-commit-hook-commit-content-rules-fail-with-exception/1077/3>.
When a rule supports only one repetition policy (always "every time") like "Commit Hook" rules, we don't render a control for `repetition_policy` and fail to update it when saving.
Before the changes to support the new "if the rule did not match the last time" policy, this workflow just defaulted to "every time" if the input was invalid, but this was changed by accident in D18926 when I removed some of the toInt/toString juggling code.
(This patch also prevents users from fiddling with the form to create a rule which evaluates with an invalid policy; this wasn't validated before.)
Test Plan:
- Created new "Commit Hook" (only one policy available) rule.
- Saved existing "Commit Hook" rule.
- Created new "Task" (multiple policies) rule.
- Saved existing Task rule.
- Set task rule to each repetition policy, saved, verified the save worked.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18992
Summary:
Ref T13060. See PHI343. Triaging this bug required figuring out where in the pipeline UTF8 was being dropped, and bisecting the pipeline required making calls to Conduit.
Currently, there's no easy way to debug/inspect arbitrary Conduit calls, especially when they are `diffusion.*` calls which route to a different host (even if you have a real session and use the web console for these, you just see an HTTP service call to the target host in DarkConsole).
Add a `bin/conduit` utility to make this kind of debugging easier, with an eye toward the Phacility production cluster (or other similar clusters) specifically.
Test Plan:
- Ran `echo '{}' | bin/conduit call --method conduit.ping --input -` and similar.
- Used a similar approach to successfully diagnose the UTF8 issue in T13060.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13060
Differential Revision: https://secure.phabricator.com/D18987
Summary:
Depends on D18985. Ref T13053. See PHI125. Currently, mail attachments are just encoded onto the actual objects in the `MetaMTAMail` table.
This fails if attachments can't be encoded in JSON -- e.g., they aren't UTF8. This happens most often when revisions or commits attach patches to mail and those patches contain source code changes for files that are not encoded in UTF8.
Instead, save attachments in (and load attachments from) Files.
Test Plan: Enabled patches for mail, created a revision, saw it attach a patch. Viewed mail in web UI, saw link to download patch. Followed link, saw sensible file. Checked database, saw a `filePHID`. Destroyed mail with `bin/remove destroy`, saw attached files also destroyed.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18986
Summary:
Depends on D18984. Ref T13053. See D13408 for the original change and why this doesn't use DestructionEngine right now. The quick version is:
- It causes us to write a destruction log, which is slightly silly (we're deleting one thing and creating another).
- It's a little bit slower than not using DestructionEngine.
However, it gets us some stuff for free that's likely relevant now (e.g., Herald Transcript cleanup) and I'm planning to move attachments to Files, but want to be able to delete them when mail is destroyed.
The destruction log is a touch silly, but those records are very small and that log gets GC'd later without generating new logs. We could silence the log from the GC if it's ever an issue.
Test Plan: Used `bin/remove destroy` and `bin/garbage collect --collector mail.sent` to destroy mail and collect garbage.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18985
Summary: Depends on D18983. Ref T13053. Adds a new Herald action to activate the "must encrypt" flag and drop mail content.
Test Plan:
- Created a new Herald rule:
{F5407075}
- Created a "dog task" (woof woof, unsecure) and a "duck task" (quack quack, secure).
- Viewed mail for both in `bin/mail` and web UI, saw appropriate security/encryption behavior.
- Viewed "Must Encrypt" in "Headers" tab for the duck mail, saw why the mail was encrypted (link to Herald rule).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18984
Summary:
Ref T13053. See PHI291. For particularly sensitive objects (like security issues), installs may reasonably wish to prevent details from being sent in plaintext over email.
This adds a "Must Encrypt" mail behavior, which discards mail content and all identifying details, replacing it with a link to the `/mail/` application. Users can follow the link to view the message over HTTPS.
The flag discards body content, attachments, and headers which imply things about the content of the object. It retains threading headers and headers which may uniquely identify the object as long as they don't disclose anyting about the content.
The `bin/mail list-outbound` command now flags these messages with a `#` mark.
The `bin/mail show-outbound` command now shows sent/suppressed headers and the body content as delivered (if it differs from the original body content).
The `/mail/` web UI now shows a tag for messages marked with this flag.
For now, there is no way to actually set this flag on mail.
Test Plan:
- Forced this flag on, made comments and took actions to send mail.
- Reviewed mail with `bin/mail` and `/mail/` in the web UI, saw all content information omitted.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13053
Differential Revision: https://secure.phabricator.com/D18983
Summary:
Ref T13057. This makes "reverts" syntax more visible and useful. In particular, you can now `Reverts Dxx` in a revision or commit, and `Reverts <hash>` from a revision.
When you do, the corresponding object will get a more-visible cross-reference marker in its timeline:
{F5405517}
From here, we can look at surfacing revert information more heavily, since we can now query it on revision/commit pages via edges.
Test Plan: Used "reverts <hash>" and "reverts <revision>" in Differential and Diffusion, got sensible results in the timeline.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13057
Differential Revision: https://secure.phabricator.com/D18978
Summary: See PHI333. Some of the cleanup at the tail end of the bulk edit changes made "Assign To" stop working properly, since we don't strip the `array(...)` off the `array(PHID)` value we receive.
Test Plan:
- Used bulk editor to assign and unassign tasks (single value datasource).
- Used bulk editor to change projects (multi-value datasource).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18975
Summary:
Depends on D18972. Ref T13049.
Currently, the "flags" columns renders an inscrutible bitmask which you have to go hunt down in the code. Show a list of flags in human-readable text instead.
The "code" column renders a meaningless integer code. Show a text description instead.
The pull logs and push logs pages don't have a crumb to go back up out of the current query. Add one.
Test Plan: Viewed push logs, no more arcane numbers. Saw and clicked crumbs on each log page.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18973
Summary:
Depends on D18971. Ref T13049. The rule is currently "you can see IP addresses for actions which affect your account".
There's some legitimate motivation for this, since it's good if you can see that someone you don't recognize has been trying to log into your account.
However, this includes cases where an administrator disables/enables your account, or promotes/demotes you to administrator. In these cases, //their// IP is shown!
Make the rule:
- Administrators can see it (consistent with everything else).
- You can see your own actions.
- You can see actions which affected you that have no actor (these are things like login attempts).
- You can't see other stuff: usually, administrators changing your account settings.
Test Plan: Viewed activity log as a non-admin, no longer saw administrator's IP address disclosed in "Demote from Admin" log.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18972
Summary:
Depends on D18970. Ref T13049. Currently, the policy for viewing remote addresses is:
- In activity logs: administrators.
- In push and pull logs: users who can edit the corresponding repository.
This sort of makes sense, but is also sort of weird. Particularly, I think it's kind of hard to understand and predict, and hard to guess that this is the behavior we implement. The actual implementation is complex, too.
Instead, just use the rule "administrators can see remote addresses" consistently across all applications. This should generally be more strict than the old rule, because administrators could usually have seen everyone's address in the activity logs anyway. It's also simpler and more expected, and I don't really know of any legit use cases for the "repository editor" rule.
Test Plan: Viewed pull/push/activity logs as non-admin. Saw remote addresses as an admin, and none as a non-admin.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18971
Summary: Ref T13049. This is just a general nice-to-have so you don't have to export a 300MB file if you want to check the last month of data or whatever.
Test Plan: Applied filters to all three logs, got appropriate date-range result sets.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18970
Summary:
Depends on D18968. Ref T13049. Currently, if you visit `/query/?param=value`, there is no `queryKey` for the page but we build a query later on.
Right now, we incorrectly link to `/query/all/export/` in this case (and export too many results), but we should actually link to `/query/<constructed query key>/export/` to export only the desired/previewed results.
Swap the logic around a little bit so we look at the query we're actually executing, not the original URI, to figure out the query key we should use when building the link.
Test Plan: Visited a `/?param=value` page, exported data, got a subset of the full data instead of everything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18969
Summary:
Depends on D18966. Ref T13049. Adds export support to user activity logs.
These don't have PHIDs. We could add them, but just make the "phid" column test if the objects have PHIDs or not for now.
Test Plan:
- Exported user activity logs, got sensible output (with no PHIDs).
- Exported some users to make sure I didn't break PHIDs, got an export with PHIDs.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18967
Summary: Depends on D18965. Ref T13049. Move this Query and SearchEngine to be a little more modern, to prepare for Export support.
Test Plan:
- Used all the query fields, viewed activity logs via People and Settings.
- I'm not sure the "Session" query is used/useful and may remove it before I'm done here, but I just left it in place for now.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18966
Summary:
Ref T13049. When stuff executes asynchronously on the bulk workflow it can be hard to inspect directly, and/or a pain to test because you have to go through a bunch of steps to run it again.
Make future work here easier by making export triggerable from the CLI. This makes it easy to repeat, inspect with `--trace`, profile with `--xprofile`, etc.
Test Plan:
- Ran several invalid commands, got sensible error messages.
- Ran some valid commands, got exported data.
- Used `--xprofile` to look at the profile for a 300MB dump of 100K tasks which took about 40 seconds to export. Nothing jumped out as sketchy to me -- CustomField wrangling is a little slow but most of the time looked like it was being spent legitimately.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18965
Summary:
Depends on D18961. Ref T13049. Currently, longer exports don't give the user any feedback, and exports that take longer than 30 seconds are likely to timeout.
For small exports (up to 1,000 rows) continue doing the export in the web process.
For large exports, queue a bulk job and do them in the workers instead. This sends the user through the bulk operation UI and is similar to bulk edits. It's a little clunky for now, but you get your data at the end, which is far better than hanging for 30 seconds and then fataling.
Test Plan: Exported small result sets, got the same workflow as before. Exported very large result sets, went through the bulk flow, got reasonable results out.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18962
Summary:
Depends on D18960. Ref T13049. Now that Maniphest fully supports "Export Data", remove the old hard-coded version.
This is a backward compatibility break with the handful of installs that might have defined a custom export by subclassing `ManiphestExcelFormat`. I suspect this is almost zero installs, and that the additional data in the new format may serve most of the needs of this tiny number of installs. They can upgrade to `ExportEngineExtensions` fairly easily if this isn't true.
Test Plan:
- Viewed Maniphest, no longer saw the old export workflow.
- Grepped for `export` and similar strings to try to hunt everything down.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18961
Summary:
Depends on D18959. Ref T13049. Provide tags, subscribers, spaces, and created/modified as automatic extensions for all objects which support them.
(Also, for JSON export, be a little more consistent about exporting `null` instead of empty string when there's no value in a text field.)
Test Plan: Exported users and tasks, saw relevant fields in the export.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18960
Summary: Depends on D18958. Ref T13049. Support the new stuff. There are a couple more fields this needs to strictly improve on the old export, but I'll add them as extensions shortly.
Test Plan: Exported tasks to Excel, saw reasonble-looking data in the export.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18959
Summary:
Depends on D18957. Ref T13049. To do Excel exports, PHPExcel needs to be installed on the system somewhere.
This library is enormous (1K files, ~100K SLOC), which is why we don't just include it in `externals/`. This install process is a little weird and we could improve it, but users don't seem to have too much difficulty with it. This shouldn't be worse than the existing workflow in Maniphest, and I tried to make it at least slightly more clear.
Test Plan: Uninstalled PHPExcel, got it marked "Unavailable" and got reasonably-helpful-ish guidance on how to get it to work. Reinstalled, exported, got a sheet.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18958
Summary:
Depends on D18956. Ref T13049. Make the "Export Format" selector sticky.
This is partly selfish, since it makes testing format changes a bit easier.
It also seems like it's probably a good behavior in general: if you export to Excel once, that's probably what you're going to pick next time.
Test Plan: Exported to excel. Exported again, got excel as the default option.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18957
Summary:
Depends on D18954. Ref T13049. This brings over the existing Maniphest Excel export pipeline in a generic way.
The `<Type>ExportField` classes know directly that `PHPExcel` exists, which is a little sketchy, but writing an Excel indirection layer sounds like a lot of work and I don't anticipate us changing Excel backends anytime soon, so trying to abstract this feels YAGNI.
This doesn't bring over the install instructions for PHPExcel or the detection of whether or not it exists. I'll bring that over in a future change.
Test Plan: Exported users as Excel, opened them up, got a sensible-looking Excel sheet.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18955
Summary:
Depends on D18953. Ref T13049. Allow applications and infrastructure to supplement exportable fields for objects.
Then, implement an extension for custom fields. Only a couple field types (int, string) are supported for now.
Test Plan: Added some custom fields to Users, populated them, exported users. Saw custom fields in the export.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18954
Summary:
Depends on D18952. Ref T13049. For files larger than 8MB, we need to engage the chunk storage engine. `PhabricatorFile::newFromFileData()` always writes a single chunk, and can't handle files larger than the mandatory chunk threshold (8MB).
Use `IteratorUploadSource`, which can, and "stream" the data into it. This should raise the limit from 8MB to 2GB (maximum size of a string in PHP).
If we need to go above 2GB we could stream CSV and text pretty easily, and JSON without too much trouble, but Excel might be trickier. Hopefully no one is trying to export 2GB+ datafiles, though.
Test Plan:
- Changed the JSON exporter to just export 8MB of the letter "q": `return str_repeat('q', 1024 * 1024 * 9);`.
- Before change: fatal, "no storage engine can store this file".
- After change: export works cleanly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18953
Summary:
Depends on D18951. Ref T13049. When we export to CSV or plain text, add a header row in the first line of the file to explain what each column means. This often isn't obvious with PHIDs, etc.
JSON has keys and is essentially self-labeling, so don't do anything special.
Test Plan: Exported CSV and text, saw new headers. Exported JSON, no changes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18952
Summary:
Ref T13049. All exportable objects should always have these fields, so make them builtins.
This also sets things up for extensions (like custom fields).
Test Plan: Exported user data, got the same export as before.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13049
Differential Revision: https://secure.phabricator.com/D18951
Summary: See PHI276. Ref T13048. The fix in D18933 got one callsite, but missed the one in the `callConduit()` method, so the issue isn't fully fixed in production. Convert this adapter to use a real viewer (if one is available) more thoroughly.
Test Plan: Ran rules in test console, saw field values. Will test in production again.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18950
Summary: Depends on D18946. Ref T13051. Begins writing edge transactions as just a list of changed PHIDs.
Test Plan: Added, edited, and removed projects. Reviewed transaction record and database. Saw no user-facing changes but a far more compact database representation.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13051
Differential Revision: https://secure.phabricator.com/D18947
Summary:
Ref T13051. This puts a translation layer between the raw edge data in the transaction table and the UI that uses it.
The intent is to start writing new, more compact data soon. This class give us a consistent API for interacting with either the new or old data format, so we don't have to migrate everything upfront.
Test Plan: Browsed around, saw existing edge transactions render properly in transactions and feed. Added and removed subscribers and projects, saw good transaction rendering.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13051
Differential Revision: https://secure.phabricator.com/D18946
Summary: Ref T13050. Oh boy. Both of them run `grep`!
Test Plan: Will push again.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13050
Differential Revision: https://secure.phabricator.com/D18945
Summary:
Ref T13048. Fixes T11112. I mostly fixed this before in D18887, but missed that these other actions are also affected. T11112 had a more complete list of missing limits.
(It's possible there are some others somewhere, but this is everything we know about, I think.)
Test Plan: Created rules using these actions, typed stuff into the box, was only able to enter one value.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048, T11112
Differential Revision: https://secure.phabricator.com/D18943
A recent version of Git has changed some piece of behavior here and we
now get "fatal: ssh variant 'simple' does not support setting port"
when using a port. Explicitly setting GIT_SSH_VARIANT to `ssh` likely
fixes this.
Summary:
See PHI316. Maniphest and other applications currently have controls like `Created After: [_____]` where you just get an empty text field.
Although most formats work -- including relative formats like "3 days ago" -- and we validate inputs so you get an error if you enter something nonsensical, this still isn't very user friendly.
T8060 or some other approach is likely the long term of this control.
In the meantime, add placeholder text to suggest that `YYYY-MM-DD` or `X days ago` will work.
Test Plan: Viewed date inputs, saw placeholder text.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18942
Summary:
See PHI307. Currently, when reviews undraft, we retroactively add in older activity to the mail ("alice created this revision...").
However, we don't add that activity to the mail tags, so the relevant tags (like "revision created") are dropped forever.
Instead, use the same set of transactions for both mail body and mail tag construction.
This should be obsoleted in the relatively near future by T10448, but it's a better/more correct behavior in general and we probably can't get rid of tags completely for a while.
Test Plan:
Applied patch, created a revision with builds, saw it auto-undraft after builds finished. Used `bin/mail list-outbound` and `bin/mail show-outbound` to see the mail. Verified that it included retroactive text ("created this revision") AND retroactive tags.
Note that the tag for "A new revision is created" is `DifferentialTransaction::MAILTAG_REVIEW_REQUEST` with literal value `differential-review-request`.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18941
Summary:
Depends on D18939. Ref T13047. Symbol lookup can be activated from a diff (in Differential or Diffusion) or from the static view of a file at a particular commit.
In the latter case, we need to figure out the path a little differently. The character and line number approaches still work as written.
Test Plan:
- Command-clicked symbols in the Diffusion browse view with blame on and off; saw path, line and char populate properly.
- Command-clicked symbols in Differential diff view to check I didn't break anything.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18940
Summary: Depends on D18937. Ref T13047. When available, provide character positions so external indexers can return more accurate results.
Test Plan: Clicked symbols in Safari, Firefox and Chrome, got sensible-looking character positions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18939
Summary: See PHI280. We have a similar field for tasks already, this is generally a reasonable sort of thing to support, and the addition of "draft" states means there are some pretty reasonable use cases.
Test Plan:
- Wrote a status-based ("status is needs revision") Herald rule.
- Tested it against a "Needs Revision" revision (passed) and a "Changes Planned" revision (failed).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18938
Summary:
Depends on D18936. Ref T13047. Third parties can define external symbol sources that let users jump to PHP or Python documentation or query some server.
Give these queries more information so they can try to get better results: the path and line where the symbol appeared, and any known repository scope.
Test Plan: Wrote a fake external source that used this data, command-clicked a symbol in Differential, saw a fake external symbol result.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18937
Summary:
Ref T13047. In some reasonable cases, knowing the path and line number where a symbol appears is useful in ranking or filtering the set of matching symbols.
Giving symbol sources more information can't hurt, and it's generally free for us to include this context since we just need to grab it out of the document and pass it along.
We can't always get this data (for example, if a user types `s idx` into global search, we have no clue) but this is similar to other types of context which are only available sometimes (like which repository a symbol appears in).
Test Plan: Command-clicked some symbols in 1-up (unified) and 2-up (side-by-side) diff views with symbol indexes configured. Got accurate path and line information in the URI I was redirected to.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13047
Differential Revision: https://secure.phabricator.com/D18936
Summary:
Depends on D18934. Ref T13046. Add support for the new export flow to a second application.
My goal here is mostly just to make sure that this is general enough to work in more than one place, and exporting user accounts seems plausible as a useful feature, although we do see occasional requests for this feature exactly (like <https://discourse.phabricator-community.org/t/users-export-to-csv/968>).
The exported data may not truly be useful for much (no disabled/admin/verified/MFA flags, no external account data, no email addresses for policy reasons) but we can expand it as use cases arise.
Test Plan: Exported user accounts in several formats.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18935
Summary:
Depends on D18918. Ref T13046. Ref T5954. Pull logs can currently be browsed in the web UI, but this isn't very powerful, especially if you have thousands of them.
Allow SearchEngine implementations to define exportable fields so that users can "Use Results > Export Data" on any query. In particular, they can use this workflow to download a file with pull logs.
In the future, this can replace the existing "Export to Excel" feature in Maniphest.
For now, we hard-code JSON as the only supported datatype and don't actually make any effort to format the data properly, but this leaves room to add more exporters (CSV, Excel) and data type awareness (integer casting, date formatting, etc) in the future.
For sufficiently large result sets, this will probably time out. At some point, I'll make this use the job queue (like bulk editing) when the export is "large" (affects more than 1K rows?).
Test Plan: Downloaded pull logs in JSON format.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046, T5954
Differential Revision: https://secure.phabricator.com/D18919
Summary:
Depends on D18932. Ref T13048. See PHI276. In the cluster, we don't have device keys on `web` nodes. This is generally good, since they don't need them, and it means that we aren't putting more credentials than we need on those hosts.
However, it means that when we pull diff content to test "Commit" rules via the Herald test console, we use the omnipotent user and try to use device credentials, and this fails since we don't have any.
Instead, pass the real viewer in this case so we just sign the request as them, like we do for normal Diffusion requests.
Test Plan:
Wrote and ran a commit content rule locally, no issues.
This isn't completely convincing since my local setup does have device credentials, but I'll double-check in production once this deploys.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18933
Summary:
Depends on D18931. Ref T13048. Ref T13041. This field means "the first accepting reviewer, where order is mostly arbitrary". Modern rules should almost certainly use "Accepting Reviewers" instead.
Getting rid of this completely is a pain, but we can at least reduce confusion by marking it as not-the-new-hotness. Add a "Deprecated" group, move it there, and mark it for exile.
Test Plan:
Edited a commit rule, saw it in "Deprecated" group at the bottom of the list:
{F5395001}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048, T13041
Differential Revision: https://secure.phabricator.com/D18932
Summary: Depends on D18927. Ref T13048. This implements a new policy which allows Herald rules to fire on some kinds of state changes.
Test Plan:
Wrote and tested rules with the new policy:
{F5394971}
{F5394972}
Also wrote and tested rules with the old policies:
{F5394973}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18930
Summary:
Depends on D18926. Ref T6203. Ref T13048. Herald rule repetition policies are stored as integers but treated as strings in most contexts.
After D18926, the integer stuff is almost totally hidden inside `HeraldRule` and getting rid of it completely isn't too tricky.
Do so now.
Test Plan:
- Created "only the first time" and "every time" rules. Did a SELECT on their rows in the database.
- Ran migrations, got a clean bill of health from `storage adjust`.
- Did another SELECT on the rows, saw a faithful conversion to strings "every" and "first".
- Edited and reviewed rules, swapping them between "every" and "first".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048, T6203
Differential Revision: https://secure.phabricator.com/D18927
Summary:
Depends on D18925. Ref T13048. Currently, HeraldRule stores policies as integers (0 or 1) in the database.
The application tries to mostly use strings ("first", "every"), but doesn't do a good job of hiding the fact that the values are integers deeper in the stack. So we end up with a lot of code like this:
```lang=php
$stored_int_value = $rule->getRepetitionPolicy();
$equivalent_string = HeraldRepetitionPolicyConfig::getString($stored_int_value);
$is_first = ($equivalent_string === HeraldRepetitionPolicyConfig::FIRST);
```
This happens in several places and is generally awful. Replace it with:
```lang=php
$is_first = $rule->isRepeatFirst();
```
To do this, merge `HeraldRepetitionPolicyConfig` into `HeraldRule` and hide all the mess inside the methods.
(This may let us just get rid of the integers in a later change, although I'm not sure I want to commit to that.)
Test Plan:
- Grepped for `HeraldRepetitionPolicyConfig`, no more hits.
- Grepped for `setRepetitionPolicy(...)` and `getRepetitionPolicy(...)`. There are no remaining callers outside of `HeraldRule`.
- Browed and edited several rules. I'll vet this more convincingly after adding the new repetition rule.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18926
Summary:
Depends on D18924. Ref T13048. Each adapter defines which repetition options ("every time", "only the first time") users may select for rules.
Currently, this is all explicit and hard-coded. However, every adapter really just implements this rule (except for some bugs, see below):
> You can pick "only the first time" if this adapter fires more than once on the same object.
Since we already have a `isSingleEventAdapter()` method which lets us tell if an adapter fires more than once, just write this rule in the base class and delete all the copy/pasting.
This also fixes two bugs because of the copy/pasting: Pholio Mocks and Phriction Documents did not allow you to write "only the first time" rules. There's no reason for this, they just didn't copy/paste enough methods when they were implemented.
This will make a future diff (which introduces an "if the rule did not match last time" policy) cleaner.
Test Plan:
- Checked several different types of rules, saw appropriate options in the dropdown (pre-commit: no options; tasks: first or every).
- Checked mocks and wiki docs, saw that you can now write "only the first time" rules.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13048
Differential Revision: https://secure.phabricator.com/D18925
Summary: Depends on D18928. Ref T13043. Add some automated test coverage for SSH revocation rules.
Test Plan: Ran tests, got a clean bill of health.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18929
Summary:
Ref T13043. In an earlier change I updated this langauge from "Deactivate" to "Revoke", but the behavior doesn't quite match.
This table has a unique key on `<isActive, keyBody>`, which enforces the rule that "a key can only be active for one unique user".
However, we set `isActive` to `null` when we revoke a key, and multiple rows are allowed to have the value `<null, "asdf">` (since a `null` column in a unique key basically means "don't enforce this unique key").
This is intentional, to support this workflow:
- You add key X to bot A.
- Whoops, wrong account.
- You revoke key X from bot A.
- You add key X to bot B.
This isn't necessarily a great workflow -- ideally, you'd throw key X away and go generate a new key after you realize you made a mistake -- but it's the sort of practical workflow that users are likely to expect and want to see work ("I don't want to generate a new key, it's already being used by 5 other services and cycling it is a ton of work and this is just a test install for my dog anyway."), and there's no technical reason we can't support it.
To prevent users from adding keys on the revocation list back to their account, just check explicitly.
(This is probably better in general anyway, because "cert-authority" support from PHI269 may mean that two keys are "equivalent" even if their text differs, and we may not be able to rely on a database test anyway.)
Test Plan:
- Added the key `ssh-rsa asdf` to my account.
- Revoked it.
- Tried to add it again.
- Before patch: worked.
- After patch: error, "this key has been revoked".
- Added it to a different account (the "I put it on the wrong bot" workflow).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18928
Summary:
Ref T13025. See <https://discourse.phabricator-community.org/t/bulk-edit-no-actions-available/1011/1>.
I'm not sure if this is what the user is seeing, but in Chrome, the `<select />` does not automatically get set to the first valid value like it does in Safari.
Set it to the first valid value explicitly.
Test Plan: In Chrome, bulk editor previously hit a JS error when trying to read a bad action off the `<select />`. After patch, bulk edits go through cleanly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18923
Summary:
Fixes T5965.
Fixes two issues:
- Observing an empty repository could write a warning to the log.
- Mirroring an empty repository to a remote could fail.
For observing:
If newly-created with `git init --bare`, `git ls-remote` will
return the empty string. Properly return an empty set of refs, rather
than attempting to parse the single "line" that is produced by
splitting that on newlines:
```
[2018-01-23 18:47:00] ERROR 8: Undefined offset: 1 at [/phab_path/phabricator/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:405]
arcanist(head=master, ref.master=5634f8410176), phabricator(head=master, ref.master=12551a1055ce), phutil(head=master, ref.master=4755785517cf)
#0 PhabricatorRepositoryPullEngine::loadGitRemoteRefs(PhabricatorRepository) called at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:343]
#1 PhabricatorRepositoryPullEngine::executeGitUpdate() called at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:126]
#2 PhabricatorRepositoryPullEngine::pullRepositoryWithLock() called at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryPullEngine.php:40]
#3 PhabricatorRepositoryPullEngine::pullRepository() called at [<phabricator>/src/applications/repository/management/PhabricatorRepositoryManagementUpdateWorkflow.php:59]
...
```
For mirroring:
`git` treats `git push --mirror` specially when a repository is empty. Detect this case by seeing if `git for-each-ref --count 1` does anything. If the repository is empty, just bail.
Test Plan:
- Observed an empty and non-empty repository.
- Mirrored an empty and non-empty repository.
Reviewers: alexmv, amckinley
Reviewed By: alexmv
Subscribers: Korvin, epriestley
Maniphest Tasks: T5965
Differential Revision: https://secure.phabricator.com/D18920
Summary: Help for GD SetupChcek was missing the "how to install extension" content.
Test Plan: Uninstalled gd, validated extension installation instructions were present in Setup Issue.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D18922
Summary:
See PHI309. There is a window of time between when all builds pass and when Harbormaster actually publishes a revision out of draft.
If any other user tries to interact with the revision during that window, they'll pick up the undraft transaction as a side effect. However, they won't have permission to apply it and will be stopped by a validation error.
Instead, only automatically publish a revision if the actor is the revision author or some system/application user (essentially always Harbormaster).
Test Plan:
- Added a `echo ...; sleep(30);` to `HarbormasterBuildEngine->updateBuildable()` before the `applyTransactions()` at the bottom.
- Wrote an "Always, run an HTTP request" Herald rule and Harbormaster build plan.
- Ran daemons with `bin/phd debug task`.
- Created a new revision with `arc diff`, as user A.
- Waited for `phd` to enter the race window.
- In a separate browser, as user B, submitted a comment via `differential.revision.edit`.
- Before patch: edits during the race window were rejected with a validation error, "you don't have permission to request review".
- After patch: edits go through cleanly.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18921
Summary: Depends on D18917. Ref T13046. While I'm in here, update this to use more modern construction.
Test Plan: Browed and queried for push logs.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18918
Summary:
Depends on D18915. Ref T13046.
- Distinguish between HTTP and HTTPS.
- Use more constants and fewer magical strings.
- For HTTP responses, give them better type information and more helpful UI behaviors.
Test Plan: Pulled over SSH and HTTP. Reviewed resulting logs from the web UI. Hit errors like missing/invalid credentials.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18917
Summary: Depends on D18914. Updates this Query to use slightly more modern construction while I'm working in adjacent code.
Test Plan: Viewed push logs in web UI.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18915
Summary:
Depends on D18912. Ref T13046. Add a UI to browse the existing pull log table.
The actual log still has some significant flaws, but get the basics working.
Test Plan: {F5391909}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18914
Summary:
See PHI305. Ref T13046.
The SSH workflows currently extend `PhabricatorManagementWorkflow` to benefit from sharing all the standard argument parsing code. Sharing the parsing code is good, but it also means they inherit a `getViewer()` method which returns the ommnipotent viewer.
This is appropriate for everything else which extends `ManagementWorkflow` (like `bin/storage`, `bin/auth`, etc.) but not appropriate for SSH workflows, which have a real user.
This caused a bug with the pull logs where `pullerPHID` was not recorded properly. We used `$this->getViewer()->getPHID()` but the correct code was `$this->getUser()->getPHID()`.
To harden this against future mistakes:
- Don't extend `ManagementWorkflow`. Extend `PhutilArgumentWorkflow` instead. We **only** want the argument parsing code.
- Rename `get/setUser()` to `get/setSSHUser()` to make them explicit.
Then, fix the pull log bug by calling `getSSHUser()` instead of `getViewer()`.
Test Plan:
- Pulled and pushed to a repository over SSH.
- Grepped all the SSH stuff for the altered symbols.
- Saw pulls record a valid `pullerPHID` in the pull log.
- Used `echo {} | ssh ... conduit conduit.ping` to test conduit over SSH.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13046
Differential Revision: https://secure.phabricator.com/D18912
Summary:
Depends on D18908. Ref T13043. Allow users to get information about what revokers do with a new `--list` flag.
You can use `--list --type <key>` to get information about a specfic revoker.
Test Plan: Ran `bin/auth revoke --list`, saw a list of revokers with useful information.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18910
Summary:
Depends on D18907. Ref T13043. Ref T12509. We have some weird old password digest behavior that isn't terribly concerning, but also isn't great.
Specifically, old passwords were digested in weird ways before being hashed. Notably, account passwords were digested with usernames, so your password stops working if your username is chagned. Not the end of the world, but silly.
Mark all existing hashes as "v1", and automatically upgrade then when they're used or changed. Some day, far in the future, we could stop supporting these legacy digests and delete the code and passwords and just issue upgrade advice ("Passwords which haven't been used in more than two years no longer work."). But at least get things on a path toward sane, modern behavior.
Test Plan: Ran migration. Spot-checked that everthing in the database got marked as "v1". Used an existing password to login successfully. Verified that it was upgraded to a `null` (modern) digest. Logged in with it again.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043, T12509
Differential Revision: https://secure.phabricator.com/D18908
Summary:
Depends on D18906. Ref T13043. When SSH keys are edited, we normally include a warning that if you don't recognize the activity you might have problems in the mail body.
Currently, this warning is also shown for revocations with `bin/auth revoke --type ssh`. However, these revocations are safe (revocations are generally not dangerous anyway) and almost certainly legitimate and administrative, so don't warn users about them.
Test Plan:
- Created and revoked a key.
- Creation mail still had warning; revocation mail no longer did.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18907
Summary:
Depends on D18904. Ref T13043. If an attacker compromises a victim's session and bypasses their MFA, they can try to guess the user's current account password by making repeated requests to change it: if they guess the right "Old Password", they get a different error than if they don't.
I don't think this is really a very serious concern (the attacker already got a session and MFA, if configured, somehow; many installs don't use passwords anyway) but we get occasional reports about it from HackerOne. Technically, it's better policy to rate limit it, and this should reduce the reports we receive.
Test Plan: Tried to change password over and over again, eventually got rated limited. Used `bin/auth unlimit` to clear the limit, changed password normally without issues.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18906
Summary:
Ref T13043. After D18903, this data has migrated to shared infrastructure and has no remaining readers or writers.
Just delete it now, since the cost of a mistake here is very small (users need to "Forgot Password?" and pick a new password).
Test Plan: Grepped for `passwordHash`, `passwordSalt`, and variations.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18904
Summary:
Ref T13043. This moves user account passwords to the new shared infrastructure.
There's a lot of code changes here, but essentially all of it is the same as the VCS password logic in D18898.
Test Plan:
- Ran migration.
- Spot checked table for general sanity.
- Logged in with an existing password.
- Hit all error conditions on "change password", "set password", "register new account" flows.
- Verified that changing password logs out other sessions.
- Verified that revoked passwords of a different type can't be selected.
- Changed passwords a bunch.
- Verified that salt regenerates properly after password change.
- Tried to login with the wrong password, which didn't work.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18903
Summary:
Ref T13045. See that task for discussion.
This replaces `digestForIndex()` with a "clever" algorithm in `digestForAnchor()`. The new digest is the same as `digestForIndex()` except when the original output was "." or "_". In those cases, a replacement character is selected based on entropy accumulated by the digest function as it iterates through the string.
Test Plan: Added unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13045
Differential Revision: https://secure.phabricator.com/D18909
Summary:
Ref T13043. We have ~4 copies of this logic (registration, lost password recovery, set password, set VCS password).
Currently it varies a bit from case to case, but since it's all going to be basically identical once account passwords swap to the new infrastructure, bring it into the Engine so it can live in one place.
This also fixes VCS passwords not being affected by `account.minimum-password-length`.
Test Plan: Hit all errors in "VCS Password" panel. Successfully changed password.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18902
Summary:
Ref T13043. This cleans some things up to prepare for moving account passwords to shared infrastructure.
Currently, the (very old, fairly unusual) `bin/accountadmin` tool can set account passwords. This is a bit weird, generally not great, and makes upgrading to shared infrastructure more difficult. Just get rid of this to simplify things. Many installs don't have passwords and this is pointless and unhelpful in those cases.
Instead, let `bin/auth recover` recover any account, not just administrator accounts. This was a guardrail against administrative abuse, but it has always seemed especially flimsy (since anyone who can run the tool can easily comment out the checks) and I use this tool in cluster support with some frequency, occasionally just commenting out the checks. This is generally a better solution than actually setting a password on accounts anyway. Just get rid of the check and give users enough rope to shoot themselves in the foot with if they truly desire.
Test Plan:
- Ran `bin/accountadmin`, didn't get prompted to swap passwords anymore.
- Ran `bin/auth recover` to recover a non-admin account.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18901
Summary:
Ref T13043. In D18898 I moved VCS passwords to the new shared infrastructure.
Before account passwords can move, we need to make two changes:
- For legacy reasons, VCS passwords and Account passwords have different "digest" algorithms. Both are more complicated than they should be, but we can't easily fix it without breaking existing passwords. Add a `PasswordHashInterface` so that objects which can have passwords hashes can implement custom digest logic for each password type.
- Account passwords have a dedicated external salt (`PhabricatorUser->passwordSalt`). This is a generally reasonable thing to support (since not all hashers are self-salting) and we need to keep it around so existing passwords still work. Add salt support to `AuthPassword` and make it generate/regenerate when passwords are updated.
Then add a nice story about password digestion.
Test Plan: Ran migrations. Used an existing VCS password; changed VCS password. Tried to use a revoked password. Unit tests still pass. Grepped for callers to legacy `PhabricatorHash::digestPassword()`, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18900
Summary:
Ref T13043. After D18898, this has been migrated to new, more modern storage and no longer has any readers or writers.
One migration from long ago (early 2014) is affected. Since this is ancient and the cost of dropping this is small (see inline), I just dropped it.
I'll note this in the changelog.
Test Plan: Ran migrations, got a clean bill of health from `storage status`. Grepped for removed symbol.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18899
Summary:
Ref T13043. Migrate VCS passwords away from their dedicated table to new the new shared infrastructure.
Future changes will migrate account passwords and remove the old table.
Test Plan:
- Ran migrations.
- Cloned with the same password that was configured before the migrations (worked).
- Cloned with a different, invalid password (failed).
- Changed password.
- Cloned with old password (failed).
- Cloned with new password (worked).
- Deleted password in web UI.
- Cloned with old password (failed).
- Set password to the same password as it currently is set to (worked, no "unique" collision).
- Set password to account password. !!This (incorrectly) works for now until account passwords migrate, since the uniqueness check can't see them yet.!!
- Set password to a new unique password.
- Cloned (worked).
- Revoked the password with `bin/auth revoke`.
- Verified web UI shows "no password set".
- Verified that pull no longer works.
- Verified that I can no longer select the revoked password.
- Verified that accounts do not interact:
- Tried to set account B to account A's password (worked).
- Tried to set account B to a password revoked on account A (worked).
- Spot checked the `password` and `passwordtransaction` tables for saniity.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18898
Summary:
Ref T13043. When we verify a password and a better hasher is available, we automatically upgrade the stored hash to the stronger hasher.
Add test coverage for this workflow and fix a few bugs and issues, mostly related to shuffling the old hasher name into the transaction.
This doesn't touch anything user-visible yet.
Test Plan: Ran unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18897
Summary:
Ref T13043. This provides a new piece of shared infrastructure that VCS passwords and account passwords can use to validate passwords that users enter.
This isn't reachable by anything yet.
The test coverage of the "upgrade" flow (where we rehash a password to use a stronger hasher) isn't great in this diff, I'll expand that in the next change and then start migrating things.
Test Plan: Added a bunch of unit tests.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18896
Summary: Ref T13043. I'd like to replace the manual credential revocation in the Phacility export workflow with shared code in `bin/auth revoke`, but we need it to run non-interactively. Add a `--force` flag purely to make our lives easier.
Test Plan: Ran `bin/auth revoke --everywhere ...` with and without `--force`. Got prompted without, got total annihilation with.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18895
Summary:
Ref T13043. Currently:
- Passwords are stored separately in the "VCS Passwords" and "User" tables and don't share as much code as they could.
- Because User objects are all over the place in the code, password hashes are all over the place too (i.e., often somewhere in process memory). This is a very low-severity, theoretical sort of issue, but it could make leaving a stray `var_dump()` in the code somewhere a lot more dangerous than it otherwise is. Even if we never do this, third-party developers might. So it "feels nice" to imagine separating this data into a different table that we rarely load.
- Passwords can not be //revoked//. They can be //deleted//, but users can set the same password again. If you believe or suspect that a password may have been compromised, you might reasonably prefer to revoke it and force the user to select a //different// password.
This change prepares to remedy these issues by adding a new, more modern dedicated password storage table which supports storing multiple password types (account vs VCS), gives passwords real PHIDs and transactions, supports DestructionEngine, supports revocation, and supports `bin/auth revoke`.
It doesn't actually make anything use this new table yet. Future changes will migrate VCS passwords and account passwords to this table.
(This also gives third party applications a reasonable place to store password hashes in a consistent way if they have some need for it.)
Test Plan: Added some basic unit tests to cover general behavior. This is just skeleton code for now and will get more thorough testing when applications move.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18894
Summary: Ref T13043. Adds CLI support for revoking SSH keys. Also retargets UI language from "Deactivate" to "Revoke" to make it more clear that this is a one-way operation. This operation is already correctly implemented as a "Revoke" operation.
Test Plan: Used `bin/auth revoke --type ssh` to revoke keys, verified they became revoked (with proper transactions) in the UI. Revoked keys from the web UI flow.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18893
Summary: Ref T13043. Allows CLI revocation of login sessions.
Test Plan: Used `bin/auth revoke --type session` with `--from` and `--everywhere` to revoke sessions. Saw accounts get logged out in web UI.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13043
Differential Revision: https://secure.phabricator.com/D18892
Summary: Ref T13025. Fixes T10973. Fairly straightforward. The "points" type is just an alias for "text" today.
Test Plan: Bulk edited points.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10973
Differential Revision: https://secure.phabricator.com/D18889
Summary: Ref T13025. This makes limits (for fields like "Assign To") work in the bulk editor, so you can't type "Assign to: x, y, z" anymore.
Test Plan: Hit limit for "Assign to" and a custom project field. No limit for "Add subscribers".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18888
Summary:
See PHI173. Currently, Herald has an "Assign to" action for tasks, and you can specify custom fields with datasource values (like users or projects) that have a limit (like 1 "Owner", or 12 "Jury Members").
Herald doesn't support these limits right now, so you can write `[ Assign to ][ X, Y, Z ]`. This just means "Assign to X", but make it more clear by actually enforcing the limit in the UI.
Test Plan:
- Created a "projects" custom field with limit 1.
- Tried to create actions that 'assign to' or 'set custom field to' more than one thing, got helpfully rebuffed by the UI.
- Created an "add subscribers" action with more than one value.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18887
Summary:
See <https://discourse.phabricator-community.org/t/files-created-from-repository-contents-slightly-over-one-chunk-in-size-are-truncated-to-exactly-one-chunk-in-size/988/1>. Three issues here:
- When we finish reading `git cat-file ...` or whatever, we can end up with more than one chunk worth of bytes left in the internal buffer if the read is fast. Use `while` instead of `if` to make sure we write the whole buffer.
- Limiting output with `setStdoutSizeLimit()` isn't really a reliable way to limit the size if we're also reading from the buffer. It's also pretty indirect and confusing. Instead, just let the `FileUploadSource` explicitly implement a byte limit in a straightforward way.
- We weren't setting the time limit correctly on the main path.
Overall, this could cause >4MB files to "write" as 4MB files, with the rest of the file left in the UploadSource buffer. Since these files were technically under the limit, they could return as valid. This was intermittent.
Test Plan:
- Pushed a ~4.2MB file.
- Reloaded Diffusion a bunch, sometimes saw the `while/if` buffer race and produce a 4MB file with a prompt to download it. (Other times, the buffer worked right and the page just says "this file is too big, sorry").
- Applied patches.
- Reloaded Diffusion a bunch, no longer saw bad behavior or truncated files.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18885
Summary:
See PHI287. Currently, you can't get very much information about a task in the worker queue from the web UI.
This is largely intentional (e.g., it's bad if we let you inspect the content of a "send an administrator's password reset email" task), and a lot of the data is task-class specific so it would be a lot of work to expose it, but we can add one useful piece of information pretty easily: for tasks with an `objectPHID` that points at a valid object that's visible to the user, tell the user which object the task is associated with.
Test Plan: {F5386562}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18890
Summary: See PHI292. This is just a generalization of D18851: feed stories have the same issue as mail. Don't hide "requested a review" in either mail or feed.
Test Plan:
- Enable prototypes.
- No harbormaster builds.
- Create a revision.
- Pre-patch: no feed story.
- Post-patch: feed story.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18886
Summary:
Fixes T13040. To reproduce:
- View a file with blame enabled, where some line has an associated revision (say, `D123`).
- Edit `D123` so it exists and is a valid revision, but the viewer can't see it.
- Reload the page.
Instead, only add revisions to the map if we actually managed to load them.
Test Plan: Page no longer fatals.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13040
Differential Revision: https://secure.phabricator.com/D18884
Summary:
Fixes T13042. This hooks up the new "silent" mode from D18882 and makes it actually work.
The UI (where we tell you to go run some command and then reload the page) is pretty clumsy, but should solve some problems for now and can be cleaned up eventually. The actual mechanics (timeline aggregation, Herald interaction, etc.) are on firmer ground.
Test Plan:
- Made a normal bulk edit, got mail and feed stories.
- Made a silent bulk edit, no mail and no feed.
- Saw "Silent Edit" marker in timeline for silent edits:
{F5386245}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13042
Differential Revision: https://secure.phabricator.com/D18883
Summary:
Ref T13042. This adds a "silent" edit mechanism which suppresses feed stories, email, and notifications.
The other behaviors here are:
- The transactions are marked as "silent" so we can render a hint in the UI in the future to make it clear to users that they aren't missing email.
- If the editor uses Herald, mail rules are suppressed so they don't fire incorrectly (this mostly affects "the first time this rule matches, send me an email" rules: without this, they'd match "the first time" on the bulk edit, not send email, then never match again since they already matched).
- If the edit queues additional edits, those are applied silently too.
This doesn't (or, at least, shouldn't) actually change any behavior since you can't apply silent edits yet.
Test Plan:
Somewhat theoretical, since this isn't reachable yet. Should get meaningful testing in an upcoming change.
Did a bit of var_dump() / debug poking to attempt to verify that nothing too crazy is happening.
Viewed and edited objects, no changes in behavior.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13042
Differential Revision: https://secure.phabricator.com/D18882
Summary:
Ref T13042. This is a very, very old policy-violating option from yesteryear which supported build systems publishing updates by adding comments to revisions, without sending email about it.
Harbormaster has served this role for a long time and this is policy-violating in the general case (it allows attackers to act in secret).
Test Plan: Grepped for affected symbols.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13042
Differential Revision: https://secure.phabricator.com/D18881
Summary: Ref T13025. We're getting kind of a lot of actions, so put them in nice groups so they're easier to work with.
Test Plan: {F5386038}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18880
Summary:
Ref T13025. This is some minor technical stuff: make the "select" bulk edit type a little more consistent with other types by passing data down instead of having it reach up the stack. This simplifies the implementation of a custom field "select" in a future change.
Also, provide an option list to the "select" edit field for object subtypes. This is only accessible via Conduit so it currently never actually renders anything in the UI, but with the bulk edit stuff we get some initialization order issues if we don't set anything. This will also make any future changes which expose subtypes more broadly more straightforward.
Test Plan:
- Bulk edited "select" fields, like "Status" and "Priority".
- No more fatal when trying to `getOptions()` internally on the subtype field.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18878
Summary:
Ref T13025. Custom field transactions work somewhat unusually: the values sometimes need to be encoded. We currently do not apply this encoding correctly via Conduit.
For example, setting some custom PHID field to `["PHID-X-Y"]` fails with a bunch of JSON errors.
Add an extra hook callback so that EditTypes can apply processing to transaction values, then apply the correct CustomField processing.
This only affects Conduit. In a future diff, this also allows bulk edit of custom fields to work correctly.
Test Plan: Added a custom field to Maniphest with a list of projects. Used Conduit to bulk edit it (which now works, but did not before). Used the web UI to bulk edit it.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18876
Summary:
Ref T13025. Currently, the bulk editor takes an HTTP request and emits a list of "raw" transactions (simple dictionaries). This goes into the job queue, and the background job builds a real transaction.
However, the logic to turn an HTTP request into a raw transaction is ending up with some duplication, since we generally already have logic to turn an HTTP request into a full object.
Instead: build real objects first, then serialize them to dictionaries. Send those to the job queue, rebuild them into objects again, and we end up in the same spot with a little less code duplication.
Finally, delete the mostly-copied code.
Test Plan: Used bulk editor to add comments, projects, and rename tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18875
Summary:
Ref T13025. See PHI173. This supports the "Assign to" field in the new editor.
This is very slightly funky: to unassign tasks, you need to leave the field blank. I have half a diff to fix this, but the way the `none()` token works in the default datasource is odd so it needs a separate datasource. I'm punting on this for now since it works, at least, and isn't //completely// unreasonable.
This also simplifies some EditEngine stuff a little. Notably:
- I reorganized EditType construction slightly so subclasses can copy/paste a little bit less.
- EditType had `field` and `editField` properties which had the same values. I canonicalized on `editField` and made this value set a little more automatically.
Test Plan: Used bulk editor to reassign some tasks. By leaving the field blank, unassigned tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18874
Summary: Depends on D18867. Ref T13025. Fixes T8740. Rebuilds the tag/subscriber actions (add, remove, set) into the bulk editor.
Test Plan: Added, removed and set these values via bulk edit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T8740
Differential Revision: https://secure.phabricator.com/D18868
Summary:
Depends on D18866. Ref T13025. Fixes T12415. This makes the old "Add Comment" action work, and adds support for a new "Set description to" action (possibly, I could imagine "append description" being useful some day, maybe).
The implementation is just a `<textarea />`, not a whole fancy remarkup box with `[Bold] [Italic] ...` buttons, preview, typeaheads, etc. It would be nice to enrich this eventually but doing the rendering in pure JS is currently very involved.
This requires a little bit of gymnastics to get the transaction populated properly, and adds some extra validation since we need some code there anyway.
Test Plan:
- Changed the description of a task via bulk editor.
- Added a comment to a task via bulk editor.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T12415
Differential Revision: https://secure.phabricator.com/D18867
Summary: Depends on D18864. Ref T13025. Adds bulk edit support back for "status" and "priority" using `<select />` controls.
Test Plan:
Used bulk editor to change status and priority for tasks.
{F5374436}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18866
Summary: Depends on D18863. Ref PHI173. Ref T13025. After D18863, this job type is no longer used: the workflow uses a genric worker instead which can apply transactions to any object.
Test Plan: Grepped for callsites, found none.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18864
Summary:
Depends on D18862. See PHI173. Ref T13025. Fixes T10005. This redefines bulk edits in terms of EditEngine fields, rather than hard-coding the whole thing.
Only text fields -- and, specifically, only the "Title" field -- are supported after this change. Followup changes will add more bulk edit parameter types and broader field support.
However, the title field now works without any Maniphest-specific code, outside of the small amount of binding code in the `ManiphestBulkEditor` subclass.
Test Plan: Used the bulk edit workflow to change the titles of tasks.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10005
Differential Revision: https://secure.phabricator.com/D18863
Summary:
Depends on D18806. Ref T13025. See PHI173. Currently, Maniphest bulk edits are processed by a Maniphest-specific worker. I want to replace this with a generic worker which can apply transactional edits to any object.
This implements a generic worker, although it has no callers yet. Future changes give it callers, and later remove the Maniphest-specific worker.
Test Plan: See next changes.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025
Differential Revision: https://secure.phabricator.com/D18862
Summary:
Depends on D18805. Ref T13025. Fixes T10268.
Instead of using a list of IDs for the bulk editor, power it with SearchEngine queries. This gives us the full power of SearchEngine and lets us use a query key instead of a list of 20,000 IDs to avoid issues with URL lengths.
Also, split it into a base `BulkEngine` and per-application subclasses. This moves us toward T10005 and universal support for bulk operations.
Also:
- Renames most of "batch" to "bulk": we're curently inconsitent about this, I like "bulk" better since I think it's more clear if you don't regularly interact with `.bat` files, and newer stuff mostly uses "bulk".
- When objects in the result set can't be edited because you don't have permission, show the status more clearly.
This probably breaks some stuff a bit since I refactored so heavily, but it seems mostly OK from poking around. I'll clean up anything I missed in followups to deal with remaining items on T13025.
Test Plan:
{F5302300}
- Bulk edited from Maniphest.
- Bulk edited from a workboard (no more giant `?ids=....` in the URL).
- Hit most of the error conditions, I think?
- Clicked the "Cancel" button.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T10268
Differential Revision: https://secure.phabricator.com/D18806
Summary:
Ref T13025. See PHI50. Fixes T11286. Ref T10005. Begin modernizing the bulk editor.
For T10005 ("move the bulk editor to modern infrastructure"), rewrite the rendering of the editable set so that it is application-agnostic and can work with any kind of object.
For T11286 ("let users de-select items in the working set"), make the working set editable.
Test Plan:
{F5302158}
- Deselected some objects, applied an edit, saw the edit apply to only selected objects.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13025, T11286, T10005
Differential Revision: https://secure.phabricator.com/D18805
Summary: See PHI273. Third time's the charm? This page has a "Project" filter which lets you view data for only one project, but the synthetic data currently ignores it.
Test Plan: Filtered burnup chart by various projects, saw sensible-looking data.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18860
Summary: See D18857. Ref T13036. See PHI275. Explain what's going on here a little better since it isn't entirely obvious and debugging these stream parsers is a gigantic pain.
Test Plan: Read text.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13036
Differential Revision: https://secure.phabricator.com/D18859
Summary:
Ref T13020. See PHI273. See D18853. On `secure`, the chart looks less promising than it did locally, and is full of discontinuities:
{F5356544}
I think this is a sorting issue. But if I can't fake my way through this soon I'll maybe get the Fact engine running and use it to provide the data here, as a sort of half-step toward T1562?
Test Plan: Chart looks the same locally, will push and see if `secure` improves?
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13020
Differential Revision: https://secure.phabricator.com/D18854
Summary:
Depends on D18856. Ref T13036. See PHI275. When we receive a length frame but the buffer doesn't have any data yet, we currently emit a pointless 0-length data frame on the channel.
For normal chatter this is harmless/valid, but it causes problems when a channel has transitioned into bundle2 mode (probably it indicates "end of stream")?
In any case, it's never helpful, so if we're about to read a data block and don't have any data, just bail out until we see some more data.
Note that we can't end up here //expecting// a 0-length data block: both the `data-length` and `data-bytes` states already handle that properly.
Test Plan: Pushed 4MB changes to a Mercurial repository with Mercurial 4.1.1, was no longer able to hit channel errors.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13036
Differential Revision: https://secure.phabricator.com/D18857
Summary:
Depends on D18855. Ref T13036. This comment no longer seems to be accurate: anything we send over `stderr` is faithfully shown to the user with recent clients.
From [[ https://www.mercurial-scm.org/repo/hg/file/default/mercurial/help/internals/wireprotocol.txt | this document ]], the missing sauce may have been:
```
A generic error response type is also supported. It consists of a an error
message written to ``stderr`` followed by ``\n-\n``. In addition, ``\n`` is
written to ``stdout``.
```
That is, writing "\n" to stdout in addition to writing the error to stderr. However, this no longer appears to be necessary.
I think the modern client behavior is generally sensible (and consistent with the behavior of Git and Subversion) so this //probably// isn't a bug or me making a mistake.
Test Plan: With a modern client, threw some arbitrary exception during execution. Observed a helpful message on the client with no additional steps.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13036
Differential Revision: https://secure.phabricator.com/D18856
Summary:
Ref T13036. This code attempts to filter the "capabilities" message to remove "bundle2", but I think this has never worked.
Specifically, the //write// pathway is hooked, and "write" here means "client is writing a message to the server". However, the "capabilities" frame is part of the response, not part of the request. Thus, this code never fires, at least on recent versions of Mercurial.
Since I plan to support bundle2 and don't want to decode response frames, just get rid of this, assuming we'll achieve those goals.
I think this was just overlooked in D14241, which probably focused on the HTTP version. This code does (at least, potentially) do something for HTTP.
I'm leaving the actual "strip stuff" code in place for now since I think it's still used on the HTTP pathway.
Test Plan:
- Added debug logging, saw this code never hit even though `hg push --debug` shows the client believing bundle2 is supported.
- Logged both halves of the wire protocol and saw this come from the server, not the client.
- Ran the failing `hg push` of a 4MB file under hg 4.4.1, got the same error as before.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: cspeckmim
Maniphest Tasks: T13036
Differential Revision: https://secure.phabricator.com/D18855
Summary:
Depends on D18848. Ref PHI243. This puts a bit of logic up front to figure out the blueprint type before we actually start editing it.
This implementation is a little messy but it keeps the API clean. Eventually, the implementation could probably go in the TransactionTypes so more code is shared, but I'd like to wait for a couple more of these first.
This capability probably isn't too useful, but just pays down a bit of technical debt from the caveat introduced in D18822.
Test Plan:
- Created a new blueprint with the API.
- Tried to create a blueprint without a "type" (got a helpful error).
- Created and edited blueprints via the web UI.
- Tried to change the "type" of an existing blueprint (got a helpful error).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18849
Summary:
Depends on D18845. See PHI243 for context and more details.
Briefly, some objects need a "type" transaction (or something similar) very early on, and we can't generate their fields until we know the object type. Drydock blueprints are an example: a blueprint's fields depend on the blueprint's type.
In web interfaces, the workflow just forces the user to select a type first. For Conduit workflows, I think the cleanest approach is to proactively extract and apply type information before processing the request. This will make the implementation a little messier, but the API cleaner.
An alternative is to add more fields to the API, like a "type" field. This makes the implementation cleaner, but the API messier. I think we're better off favoring a cleaner API here.
This change just makes it possible for `DrydockBlueprintEditEngine` to look at the incoming transactions and extract a "type"; it doesn't actually change any behavior.
Test Plan: Performed edits via API, but this change doesn't alter any behavior.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18847
Summary: Ref PHI243. This is a followup to D18822, which added an edit-only `drydock.blueprint.edit`. By modularizing transactions (here) and then adding a "type" transaction (next change) I intend to remove the "edit-only" limitation and make this API method fully functional.
Test Plan: Created and edited blueprints via the web UI. Edited blueprints via the API. Disabled/enabled blueprints (currently web UI only).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18845
Summary:
Fixes T13031. "Enormous" changes are basically changes which are too large to hold in memory, although the actual definition we use today is "more than 1GB of change text or `git diff` runs for more than 15 minutes".
If an install configures a Herald content rule like "when content matches /XYZ/, do something" and then a user pushes a 30 GB source file, we can't put it into memory to `preg_match()` it. Currently, the way to handle this case is to write a separate Herald rule that rejects enormous changes. However, this isn't obvious and means the default behavior is unsafe.
Make the default behavior safe by rejecting these changes with a message, similar to how we reject "dangerous" changes (which permanently delete or overwrite history) by default.
Also, change a couple of UI strings from "Enormous" to "Very Large" to reduce ambiguity. See <https://discourse.phabricator-community.org/t/herald-enormous-check/822>.
Test Plan: Changed the definition of "enormous" from 1GB to 1 byte. Pushed a change; got rejected. Allowed enormous changes, pushed, got rejected by a Herald rule. Disabled the Herald rule, pushed, got a clean push. Prevented enormous changes again. Grepped for "enormous" elsewhere in the UI.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: joshuaspence
Maniphest Tasks: T13031
Differential Revision: https://secure.phabricator.com/D18850
Summary:
See PHI273. Ref T13020. After D18777, tasks created directly into the default status (which is common) via the web UI no longer write a "status" transaction.
This is consistent with other applications, and consistent with the API/email behavior for tasks since early 2016. It also improves the consistency of //reading// tasks via the API.
However, it impacted the "Burnup Report" which relies on directly reading these rows to detect task creation. Until this is fixed properly (T1562), synthetically generate the "missing" transactions which this page expects by looking at task creation dates instead.
Specifically, we:
- Generate a fake `status: null -> "open"` transaction for every task by looking at the Task table.
- Go through the transaction list and remove all the legacy `status: null -> "any open status"` transactions. These will only exist for older tasks.
- Merge all our new fake transactions into the list of transactions.
- Continue on as though nothing happened, letting the rendering code continue to operate on legacy-looking data.
I think this will slightly miscount tasks which were created directly into a closed status, but this is very rare, and does not significantly impact the accuracy of this report relative to other known issues (notably, merging closed tasks).
This will also get the wrong result if the default status has changed from an "open" status to a "closed" status at any point, but this is exceptionally bizarre/rare.
Ultimately, T1562 will let us delete all this stuff and disavow its existence.
Test Plan:
- Created some tasks, loaded burnup before/after this patch.
- My local chart looks more accurate afterwards, but the data is super weird (I used `bin/lipsum` to create a huge number of tasks a couple months ago). I'll vet this on `secure`, which has more reasonable data.
Here's my local chart:
{F5356499}
That's what it //should// look like, it's just hard to be confident that nothing else is hiding there.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13020
Differential Revision: https://secure.phabricator.com/D18853
Summary:
Depends on D18851. Ref T13035. After D18819, revision creation transactions may be split into two groups (if prototypes are enabled).
This split means we have two workers. The first worker doesn't publish feed stories or mail; the second one does.
Currently, both workers call `shouldPublishFeedStory()` before they queue, and then again after the daemons pull them out of the queue. However, the answer to this question can change.
Specifically, this happens:
- `arc` creates a revision.
- The first transaction group applies, creating the revision as a draft, and returns `false` from `shouldPublishFeedStory()`, and does not generate related PHIDs. It queues a daemon to send mail, expecting it not to publish a feed story.
- The second transaction group applies, promoting the revision to "needs review". Since the revision has promoted, `shouldPublishFeedStory()` now returns true. This editor generates related PHIDs and queues a daemon task, expecting it to send mail / publish feed.
- A few milliseconds pass.
- The first job gets pulled out of the daemon queue and worked on. It does not have any feed metadata because the object wasn't publishable when the job was queued -- but `shouldPublishFeedStory()` now returns true, so it tries to publish a story without any metadata available. Slightly bad stuff happens (see below).
- The second job gets pulled out of the daemon queue and worked on. This one has metadata and works fine.
The "slightly bad stuff" is that we publish an empty feed story with no references to any objects, then try to push it to hooks and other listeners. Since it doesn't have any references, it fails to load during the "push to external listeners" phase.
This is harmless but clutters the log and doesn't help anything.
Instead, cache the state of "are we publishing a feed story for this object?" when we queue the worker so it can't race.
Test Plan:
- Enabled prototypes.
- Disabled all Herald triggers for Harbormaster build plans.
- Ran `bin/phd debug task` in one window.
- Created a revision in a separate window.
- Before patch: saw "unable to load feed story" errors in the daemon log.
- After patch: no more "unable to load feed story" errors.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13035
Differential Revision: https://secure.phabricator.com/D18852
Summary: Ref T13035. See that task for a description of the issue.
Test Plan:
- Enabled prototypes.
- Disabled all Herald rules that trigger Harbormaster builds.
- Created a new revision.
- Before patch: initial review request email was dropped.
- After patch: initial review request email is sent.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13035
Differential Revision: https://secure.phabricator.com/D18851
Summary:
See PHI262. Fixes T12578. Although this is a bit niche and probably better accomplished through advisory/soft measures ("Add blocking reviewers") in most cases, it isn't difficult to implement and doesn't create any technical or product tension.
If installs write a rule that blocks commits, that will probably also naturally lead them to an "add reviewers" rule anyway.
Also, allow packages to be hit with the typeahead. They're valid reviewers but previously you couldn't write rules against them, for no actual reason.
Test Plan: Used test console to run this against commits, got sensible results for the field value.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12578
Differential Revision: https://secure.phabricator.com/D18839
Summary:
See PHI223. Ref T13024. There's a remaining registration/login order issue after the other changes in T13024: we lose track of the current URI when we go through the MFA flow, so we can lose "Set Password" at the end of the flow.
Specifically, the flow goes like this today:
- User clicks the welcome link in email.
- They get redirected to the "set password" settings panel.
- This gets pre-empted by Legalpad (although we'll potentially survive this with the URI intact).
- This also gets pre-empted by the "Set MFA" workflow. If the user completes this flow, they get redirected to a `/auth/multifactor/?id=123` sort of URI to highlight the factor they added. This causes us to lose the `/settings/panel/password/blah/blah?key=xyz` URI.
The ordering on this is also not ideal; it's preferable to start with a password, then do the other steps, so the user can return to the flow more easily if they are interrupted.
Resolve this by separating the "change your password" and "set/reset your password" flows onto two different pages. This copy/pastes a bit of code, but both flows end up simpler so it feels reasonable to me overall.
We don't require a full session for "set/reset password" (so you can do it if you don't have MFA/legalpad yet) and do it first.
This works better and is broadly simpler for users.
Test Plan:
- Required MFA + legalpad, invited a user via email, registered.
- Before: password set flow got lost when setting MFA.
- After: prompted to set password, then sign documents, then set up MFA.
- Reset password (with MFA confgiured, was required to MFA first).
- Tried to reset password without a valid reset key, wasn't successful.
- Changed password using existing flow.
- Hit various (all?) error cases (short password, common password, mismatch, missing password, etc).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18840
Summary:
Ref PHI261. This moves Harbormaster build status to work more similarly to other modern status types, like Differential revision status, where we try to specify as much behavior on the server as possible so that the client and server can vary independently.
(I don't have any specific plans to make Harbormaster build status configurable on the server side, but it isn't out of the question.)
Test Plan: Ran `harbormaster.querybuilds` (saw same data as before) and `harbormaster.build.search` (saw same data as before, plus new ANSI color data).
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18838
Summary: This probably isn't the best solution, however, it conveniently avoids the bug from T13033. It would probably be more user-friendly (but more difficult to implement) if we allowed either Project Details //or// Workboard to be hidden but not both.
Test Plan: Tested locally, indeed this prevents hiding the menu item.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18836
Summary:
Fixes T13033. Currently (prior to D18836) all the default items for projects can be hidden. When this occurs, the main project page fatals.
If we fix the fatal narrowly (don't try to call `null->getBuiltinKey()` when `$default` is `null`), it would 404, which is a little better but not by much.
After D18836 you can't hide "Profile", which is pretty sensible, and effectively fixes this. This change doubles down: let "Manage" be a default, and send the user there if we can't find a different default.
Ideally, the MenuEngine itself will do more rendering eventually (as it does for some of the newer Home stuff) and could handle this defaulting behavior with less special casing, but we'd still end up in a similar situation if a project had only one "Link" item to "coolcats.com" or something: redirecting the user to "coolcats.com" is probably better than fataling, but not by a huge margin, and not likely to be what they expect.
Test Plan:
Before D18836, disabled both "Profile" and "Workboard" items on a project. Visited project page.
Before patch: fatal. After patch: manage page.
After D18836, you can't do this and just get the profile, so this is sort of moot and mostly future-proofing/for-completeness.
Reviewers: 20after4, amckinley
Reviewed By: amckinley
Maniphest Tasks: T13033
Differential Revision: https://secure.phabricator.com/D18843
Summary: Events with no attendees (e.g. fresh instances of recurring events) would trigger an exception when sending notifications, because `$attendee_map` would still get populated.
Test Plan: Declined event, restarted daemons. Did not see exception. Accepted event, restarted daemons. Saw "[Calendar] [Reminder]" email.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D18835
Summary: Ref T13030. See PHI254. This behavior could be cleaner than I've made it, but it fixes the "this is totally broken" issue, replacing a fatal/exception with an informative (just not terribly useful) page.
Test Plan:
- Added a submodule to a repository.
- In Diffusion, clicked some other file next to the submodule, then edited the URI to the submodule path instead.
- Before patch: fatal.
- After patch: relatively useful message about this being a submodule.
Note that it's normally hard to hit this URI directly. In the browse view, submodules are marked up as directories and linked to a separate submodule resolution flow.
{F5321524}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13030
Differential Revision: https://secure.phabricator.com/D18831
Summary:
See PHI230. Currently, we denormalize raw line counts onto diffs and revisions, but not added/removed line counts.
I'd like to try a `[---+ ]` sort of size hint element (see D16322 for more) as a general approach to conveying size information at a glance and see how it feels, since I think the raw size number isn't very scannable/useful and it may be a significant improvement to hint about how much of a change is throwing stuff out vs adding new stuff.
This just makes the data available without any subquerying and doesn't actually change the UI.
Test Plan:
Created a revision, saw detailed change information populate in the database.
```
mysql> select * from differential_revision where id = 292\G
*************************** 1. row ***************************
id: 292
title: WIP
originalTitle: WIP
phid: PHID-DREV-ux3cxptibn3l5pxsug3z
status: draft
summary: asdf
testPlan: asdf
authorPHID: PHID-USER-cvfydnwadpdj7vdon36z
lastReviewerPHID: NULL
lineCount: 41
dateCreated: 1513179418
dateModified: 1513179418
attached: []
mailKey: h4mn6perdio47o4beomyvu75zezwvredx3mbrlgz
branchName: NULL
viewPolicy: users
editPolicy: users
repositoryPHID: PHID-REPO-wif5lutk5gn3y6ursk4p
properties: {"lines.added":40,"lines.removed":1}
activeDiffPHID: PHID-DIFF-ixjphpunpkenqgukpmce
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18832
Summary:
Depends on D18828. Ref T7789. See <https://discourse.phabricator-community.org/t/git-lfs-fails-with-large-images/584>.
Currently, when you upload a large (>4MB) image, we may try to assess the dimensions for the image and for each individual chunk.
At best, this is slow and not useful. At worst, it fatals or consumes a ton of memory and I/O we don't need to be using.
Instead:
- Don't try to assess dimensions for chunked files.
- Don't try to assess dimensions for the chunks themselves.
- Squelch errors for bad data, etc., that `gd` can't actually read, since we recover sensibly.
Test Plan:
- Created a 2048x2048 PNG in Photoshop using the "Random Noise" filter which weighs 8.5MB.
- Uploaded it.
- Before patch: got complaints in log about `imagecreatefromstring()` failing, although the actual upload went OK in my environment.
- After patch: clean log, no attempt to detect the size of a big image.
- Also uploaded a small image, got dimensions detected properly still.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D18830
Summary: Depends on D18827. Ref T7789. See PHI204. See PHI131. This button got accidentally removed in Diffusion refactoring (`$data` is no longer used).
Test Plan: {F5321459}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D18828
Summary: See PHI131. Ref T7789. Although this probably isn't 100% complete, there don't seem to be any actual, known, practical blocking issues remaining (everything is either heresay or not reproducible).
Test Plan: Tried to push LFS locally, got blocked with a helpful message. Enabled setting, tried to push LFS locally, got a successful push.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T7789
Differential Revision: https://secure.phabricator.com/D18825
Summary:
See PHI242. All use cases for this that I know of are pretty hacky, but they don't seem perilous, and it's easier than webhooks.
See P1895, T10183, and T9853 for me previously refusing to implement this since all those use cases were also pretty bad.
Test Plan:
- Wrote a rule to add comments, saw it add comments.
- Reviewed summary, re-edited rule, reviewed transcript to check that all the strings worked OK.
- Wrote a new rule for a non-commentable object (a blog) to make sure I wasn't offered the "Add a comment" action.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18823
Summary:
Ref: https://admin.phacility.com/PHI243
Since our use case primarily focuses on transaction editing, this patch implements the `drydock.blueprint.edit` api method with the understanding that:
a) this is a work in progress
b) object editing is supported, but object creation is not yet implemented
Test Plan:
* updated existing blueprints via Conduit UI
* regression tested `maniphest.edit` by creating new and updating existing tasks
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, yelirekim, jcox
Differential Revision: https://secure.phabricator.com/D18822
Summary:
Fixes T13027. Ref T2543. When revisions promote from "Draft" because builds finish or no builds are configured, the status currently switches from "Draft" to "Needs Review" without re-running Herald.
This means that some rules -- notably, "Send me an email" rules -- don't fire as soon as they should.
Instead of applying this promotion in a hacky way inline, queue it and apply it normally in a second edit, after the current group finishes.
Test Plan:
- Created a revision, reviewed Herald transcripts.
- Saw three Herald passes:
- First pass (revision creation) triggered builds and no email.
- Second pass (builds finished) did not trigger builds (no update) and did not trigger email (revision still a draft).
- Third pass (after promotion out of 'draft') did not trigger builds (no update) but did trigger email (revision no longer a draft).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13027, T2543
Differential Revision: https://secure.phabricator.com/D18819
Summary:
See <https://discourse.phabricator-community.org/t/activation-link-in-welcome-mail-only-works-if-new-user-isnt-semi-logged-in/740/7>.
In T13024, I rewrote the main menu bar to hide potentially sensitive items (like notification and message counts and saved search filters) until users fully log in.
However, the "Log In" item got caught in this too. For clarity, rename `shouldAllowPartialSessions()` to `shouldRequireFullSession()` (since logged-out users don't have any session at all, so it would be a bit misleading to say that "Log In" "allows" a partial session). Then let "Log In" work again for logged-out users.
(In most cases, users are prompted to log in when they take an action which requires them to be logged in -- like creating or editing an object, or adding comments -- so this item doesn't really need to exist. However, it aligns better with user expectations in many cases to have it present, and some reasonable operations like "Check if I have notifications/messages" don't have an obvious thing to click otherwise.)
Test Plan: Viewed site in an incognito window, saw "Log In" button again. Browsed normally, saw normal menu.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18818
Summary:
See <https://discourse.phabricator-community.org/t/diffusion-observed-mercurial-repository-history-broken/825>.
In D18769, I rewrote this from using the `--branch` flag (which is unsafe and does not function on branches named `--config=x.y` and such).
However, this rewrite accidentally changed the result order, which impacted Mercurial commit hisotry lists and graphs. Swap the order of the constraints so we get newest-to-oldest again, as expected.
Test Plan: Viewed a Mercurial repository's history graph, saw sensible chronology after the patch.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18817
Summary: Ref T13001, URLs that return multiple commits should show a list of those commits. Not sure if the actual list looks very pretty this way, but was wondering if this approach was vaguely correct.
Test Plan:
- Navigate to `install/rPbd3c23`
- User should see a list view providing links to `install/rPbd3c2355e8e2b220ae5e3cbfe4a057c8088c6a38` and `install/rPbd3c239d5aada68a31db5742bbb8ec099074a561`
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T13001
Differential Revision: https://secure.phabricator.com/D18816
See PHI238. When an install uninstalls "Legalpad", we were incorrectly failing
to mark sessions as "Signed All Required Documents" by bailing early.
Test Plan: Uninstalled Legalpad, logged in.
Summary: Ref T13019, adds build status back to Diffusion commits
Test Plan: Open a Diffusion commit that has a build status, property list view should show the build status, but not Subscriptions, Projects, or Tokens.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T13019
Differential Revision: https://secure.phabricator.com/D18813
Summary: See PHI234. In T12931 we improved the behavior of Diffusion when a repository's default branch is set to a branch that does not exist, but in T11823 the way refcursors work changed, and we can now get a cursor (just with no positions) back for a deleted branch. When we did, we didn't handle things gracefully.
Test Plan:
- Set default branch to a deleted branch, saw nice error instead of fatal.
- Set default branch to a nonexistent branch which never existed, saw nice error.
- Set default branch to existing "master", saw repository normally.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18811
Summary:
See PHI234. Several issues here:
- The warning about observing a repository in Read/Write mode checks the raw I/O type, not the effective I/O type. That means we can fail to warn if other URIs are set to "Default", and "Default" is "Read/Write" in practice.
- There's just an actual typo which prevents the "Observe" version of this error from triggering properly.
Additionally, add more forceful warnings that "Observe" and "Mirror" mean that you want to //replace// a repository with another one, not that we somehow merge branches selectively. It isn't necessarily obvious that "Observe" doesn't mean "merge/union", since the reasons it can't in the general case are somewhat subtle (conflicts between refs with the same names, detecting ref deletion).
Test Plan:
Read documentation. Hit the error locally by trying to "Observe" while in Read/Write mode:
{F5302655}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18810
Summary:
Ref T10405. If `gd` is not installed, a number of unit tests currently fail because they generate synthetic users and try to composite profile pictures for them.
Instead, just fall back to a static default if `gd` is not available.
Test Plan: Faked this pathway, created a new user, saw a default profile picture.
Reviewers: amckinley, lpriestley, avivey
Reviewed By: avivey
Maniphest Tasks: T10405
Differential Revision: https://secure.phabricator.com/D18812
Summary:
Ref T10233. See PHI231. When users ignore the `arc land` prompt about bad revision states, make it explicitly clear in the transaction log that they broke the rules.
You can currently figure this out by noticing that there's no "This revision is accepted and ready to land." message, but it's unrealistic to expect non-expert users to look for the //absence// of a message to indicate something, and this state change is often relevant.
Test Plan: {F5302351}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T10233
Differential Revision: https://secure.phabricator.com/D18808
Summary:
Use ClassQuery to find datasources for the quick-search.
Mostly, this allows extensions to add quicksearches.
Test Plan:
using `/typeahead/class/`, tested several search terms that make sense.
Removed the tag interface from a datasource, which removed it from results.
Reviewers: epriestley, amckinley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18760
Summary:
Depends on D18801. Ref T2543. See PHI229. I missed "Accept" before, but intended to disallow it (like "Reject") since I don't want drafts to be reviewable.
However, "Resign" seems fine to allow? So let's allow that for now.
Test Plan: Was no longer offered "Accept" on draft revisions.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18802
Summary:
See PHI228. Ref T2543. The current logic gets this slightly wrong: prototypes are off, you create a draft with `--draft`, then promote it with "Request Review". This misses both branches.
Instead, test these conditions a little more broadly. We also need to store broadcast state since `getIsNewObject()` isn't good enough with this workflow.
Test Plan:
- With prototypes on and autopromotion, got a rich email after builds finished.
- With prototypes off, got a rich email immediately.
- With prototypes off and `--draft`, got a rich email after "Request Review".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18801
Summary:
Depends on D18792. Fixes T13024. Fixes T89198. Currently, when users are logging in initially (for example, need to enter MFA) we show more menu items than we should.
Notably, we may show some personalized/private account details, like the number of unread notifications (probably not relevant) or a user's saved queries (possibly sensitive). At best these are misleading (they won't work yet) and there's an outside possibility they leak a little bit of private data.
Instead, nuke everything except "Log Out" when users have partial sessions.
Test Plan:
Hit a partial session (MFA required, email verification required) and looked at the menu. Only saw "Log Out".
{F5297713}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18793
Summary: Depends on D18791. Ref T13024. This clears up another initialization order issue, where an unverified address could prevent MFA enrollment.
Test Plan: Configured both verification required and MFA required, clicked "Add Factor", got a dialog for the workflow.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18792
Summary:
Depends on D18790. Ref T13024. Fixes T8335. Currently, "unapproved" and "disabled" users are bundled together. This prevents users from completing some registration steps (verification, legalpad documents, MFA enrollment) before approval.
Separate approval out and move it to the end so users can do all the required enrollment stuff on their end before we roadblock them.
Test Plan: Required approval, email verification, signatures, and MFA. Registered an account. Verified email, signed documents, enrolled in MFA, and then got prompted to wait for approval.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024, T8335
Differential Revision: https://secure.phabricator.com/D18791
Summary:
Depends on D18789. Ref T13024. See PHI223. Currently, if `security.require-multi-factor-auth` and Legalpad "Signature Required" documents are //both// set, it's not possible to survive account registration, since MFA is requiried to sign and signatures are required to add MFA.
Instead, check for signatures before requiring MFA enrollment. This makes logical sense, since it's silly to add MFA if you don't agree to a Terms of Service or whatever.
(Note that if you already have MFA, we prompt for that first, before either of these steps, which also makes sense.)
Test Plan: Configured `security.require-multi-factor-auth`. Added a signature-required document. Loaded a page as a new user. Went through signature workflow, then through the MFA enrollment workflow.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18790
Summary: Depends on D18788. Ref T13024. Currently, we prompt users to sign from newest to oldest. This seems less intuitive than oldest to newest.
Test Plan: Dumped document order, saw it swap to oldest-first.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18789
Summary: Depends on D18786. Ref T13024. I'm going to change the order this occurs in, but move it to a separate method and clean it up a little first.
Test Plan: Added a new document as required, reloaded, signed it, got logged into a session.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18788
Summary: Depends on D18785. Ref T13024. While I'm in here, update this a bit to use the newer stuff.
Test Plan: Searched for Legalpad documents, saw more modern support (subscribers, order by, viewer()).
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18786
Summary: Ref T13024. Updates LegalpadDocumentQuery to use slightly more modern constructions.
Test Plan: Queried for Legalpad documents, got the same results.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13024
Differential Revision: https://secure.phabricator.com/D18785
Summary:
See PHI225. Previously, see D15335 / T10413. On workboards, we hide archived project tags since they aren't terribly useful in that context, at least most of the time. Originally, see T10349#159916 and D15297.
However, hovercards reuse this display logic, and it's inconsistent/confusing to hide them there, since the actual "Tags" elements on task pages show them. Narrow the scope of this rule.
Test Plan:
- Viewed a hovercard for a task with an archived project tagged, saw archived project.
- Viewed a workboard for the same task, saw only unarchived projects other than the current board tagged (this behavior is unchanged).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18783
Summary:
Ref T13018. See that task and the Discourse thread for discussion.
This doesn't work as-is and we need to `og:description` everything to make it work. I don't want to sink any more time into this so just back all the changes out for now.
(The `<html>` change is unnecessary anyway.)
Test Plan: Strict revert.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13018
Differential Revision: https://secure.phabricator.com/D18782
Summary: Ref T13018. This is easy to get working roughly, at least, and seems reasonable.
Test Plan: Viewed page source, saw tags. Custom header logo still worked. Pretty hard to debug against a local install since Disqus / debugger tools can't hit it, but I'll see what it looks like in production and tweak it if I got anything horribly wrong.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13018
Differential Revision: https://secure.phabricator.com/D18780
Summary:
Ref T13020. See PHI221.
Freeze legacy method `maniphest.gettasktransactions` in favor of modern method `transaction.search`.
Remove legacy "null on create" behavior from Maniphest status and priority transactions. This behavior is obsolete with EditEngine, and leads to inconsistent transaction sets in the transaction record.
The desired behavior is that transactions which don't do anything (e.g., default value was not changed) don't appear in the transaction log.
Test Plan:
- Viewed API UI and saw `maniphest.gettasktransactions` marked as "Frozen".
- Created a new task via web UI (without changing status/priority), queried transactions with `maniphest.gettasktransacitons`/`transaction.search`, no longer saw "null on create" no-op transactions in record.
- Web UI is unchanged, since these transactions were hidden before and now do not exist.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13020
Differential Revision: https://secure.phabricator.com/D18777
Summary: Whitespace has semantic meaning for yaml files, so we shouldn't suppress whitespace-only lines of diff by default.
Test Plan: Edited local config to include yaml files, saw expected whitespace changes.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18775
Summary:
See PHI180. Currently, if you begin creating or editing an inline and then swap display modes (for example, with "View Unified"), your edit is lost.
Persisting the editor state is complicated and this is very rare, so just prevent the action and warn the user instead.
Also make the warning persist for a little longer since a few of the messages, including this one, take a couple seconds to read now.
Test Plan:
- Edited a comment, tried to swap display modes, got a warning.
- Swapped display modes normally with no comment being edited.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18774
Summary:
Fixes paging on the Diffusion Repository List.
PhabricatorRepositoryQuery needs to specify a behavior for `null` on the OderableColumns definition for the `callsign` column.
See https://phabricator.wikimedia.org/T180457
Test Plan:
1. On an instance with more than 100 repositories
* some of which are missing a callsign
2. Attempt to sort by callsign.
3. See the sorted results
Previously:
3. Exception: "Column "0" has null value, but does not specify a null behavior."
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18773
Summary:
Depends on D18771. See PHI206. Currently, `arc diff --draft` only holds revisions in draft mode: it doesn't put them into draft mode if the install isn't configured to use draft mode.
Instead, make it a bit more forceful so that `arc diff --draft` can create into draft mode explicitly even if protoypes are off. This aligns with expection a little more clearly.
Test Plan: Ran `arc diff --draft` with prototypes off, got a revision held in draft mode.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18772
Summary: See PHI210. Ref T2543. Currently, we don't set this flag if you have prototypes off and don't get any of the new draft stuff, so the mail drops some of the details it is supposed to have.
Test Plan: Disabled prototypes, created a revision, saw summary / test plan in the initial mail.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18771
Summary:
Ref T13012. These flags can be exploited by attackers to execute code remotely. See T13012 for discussion and context.
Additionally, harden some Mercurial commands where possible (by using additional quoting or embedding arguments in other constructs) so they resist these flags and behave properly when passed arguments with these values.
Test Plan:
- Added unit tests.
- Verified "--config" and "--debugger" commands are rejected.
- Verified more commands now work properly even with branches and files named `--debugger`, although not all of them do.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13012
Differential Revision: https://secure.phabricator.com/D18769
Summary:
See PHI199. Ref T2543. When you run a RevisionQuery with a legacy status constraint (via `differential.query`), we currently don't match "Draft" revisions.
Use the actual complete map from `DifferentialRevisionStatus` instead of hard coding the status list so "Draft" is included.
Test Plan:
- Ran `differential.query` with `ids` and `status` for a draft revision.
- Before patch: revision not returned in results.
- After patch: revision returned in results.
(Note that it returns as "Needs Review", for compatibility.)
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18765
Summary:
See PHI190. This clarifies the ruleset a bit:
- If you accepted, then the author used "Request Review" explicitly, we now show "Accepted Earlier" instead of "Accepted" in the "Reviewers" list on the main revision page. This makes it sligthly more clear why the revision is back in your review queue without picking through the transaction log.
- Instead of moving all non-current accepts into "Ready to Review", move only voided accepts into "Ready to Review". This stops us from pulling older accepts which haven't been voided (which could have been incorrectly pulled) and correctly pulls older, voided accepts from before an update (for example: accept, then request review, then update) and generally aligns better with intent/expectation.
Test Plan:
- Accepted, requested review.
- Saw reviewer as "Accepted Earlier".
- Saw review in "Ready to Review" bucket.
- Accepted, updated (with sticky accept).
- Saw reviewer as "Accepted Prior Diff".
- Saw review as "Waiting on Authors".
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18764
Summary:
Ref PHI193. This method of enforcing policy checks is now (mostly) obsolete, and they're generally checked at the Controller/API level instead.
Notably, this method does not call `adjustObjectForPolicyChecks(...)` properly, so it can not handle special cases like "creating a project and taking its newly created members into account" for object policies like "Project Members".
Just remove these checks, which are redundant with checks elsewhere.
Test Plan:
- Set Project application default edit policy to "Administrators and Project Members".
- Tried to create a project as a non-administrator, adding myself.
- Before patch: policy fatal on a VOID object (the project with no PHID generated yet).
- After patch: object created properly. Got a sensible policy error if I didn't include myself as a member.
- Also verified that other edit rules are still enforced/respected (I can't edit stuff I shouldn't be able to edit).
- There's at least a bit of unit test coverage of this, too, which I updated to work via API (which hits the new broad capability checks) instead of via low-level transactions (which enforce only a subset of policy operations now).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18763
Summary: See PHI195. This bulks out these API methods since all the requests are pretty straightforward.
Test Plan: Ran `edge.search` and `differential.revision.search`.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18762
Summary:
See PHI197. Populates "status" transactions and a few other obvious types where there's no security/performance/payload/formatting issue I can come up with.
The names here are the same as the names for editing with `maniphest.edit`.
Test Plan: Used `transaction.search` to retrieve transactions of all new types.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18761
Summary: Ref T12689. See PHI178. This isn't a complete solution (you may still get mailed via packages/projects) but should fix the obvious issue, where "Resigned" reviewers are incorrectly always sent mail directly.
Test Plan: Had Alice resign, interacted as Bailey, no mail to Alice.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12689
Differential Revision: https://secure.phabricator.com/D18758
Summary:
Depends on D18756. Fixes T12539. See PHI190. Currently, when this occurs:
- Alice accepts.
- Bailey requests review.
- Alice views her dashboard.
...the revision appears in "Waiting on Other Reviewers" (regardless of whether other reviewers actually exist or not).
Instead, ignore these voided/non-current accepts and let the revisions appear in "Ready to Review", which is more natural.
Test Plan: Went through the steps above. On `master`, saw revision in "Waiting on Other Reviewers". After patch, saw it in "Ready to Review".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12539
Differential Revision: https://secure.phabricator.com/D18757
Summary:
Ref T12539. See PHI190. Currently, each Diff has a `revisionID`, but Revisions do not point at the current active diff. To find the active diff for a given revision, we need to issue a separate query.
Furthermore, this query is inefficient for bulk loads: if we have a lot of revisions, we end up querying for all diff IDs for all those revisions first, then selecting the largest ones and querying again to get the actual diff objects. This strategy could likely be optimized but the query is a mess in any case.
In several cases, it's useful to have the active diff PHID without needing to do a second query -- sometimes for convenience, and sometimes for performance.
T12539 is an example of such a case: it would be nice to refine the bucketing logic (which only depends on active diff PHIDs), but it feels bad to make the page heavier to do it.
For now, this is unused. I'll start using it to fix the bucketing issue, and then we can expand it gradually to address other performance/convenience issues.
Test Plan:
- Ran migrations, inspected database, saw sensible values.
- Created a new revision, saw a sensible database value.
- Updated an existing revision, saw database update properly.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12539
Differential Revision: https://secure.phabricator.com/D18756
Summary: Give profile images a little more space, fix "/" spacing, add a tooltip.
Test Plan: {F5251205}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18749
Summary:
Ref T2543. Fixes two relatively minor things:
- When builds finish in Harbormaster, send mail "From" the author.
- Set the `firstBroadcast` flag so that initial mail picks up earlier history (notably, the "reviewers" line).
For now, I'm not setting `firstBroadcast` on explicit "Request Review" (but maybe we should), and not trying to deal with weird cases where you leave a bunch of comments on a draft. Those might be fine as-is or may get tweaked later.
Test Plan: Created a revision with Harbormaster builds, ran builds, saw initial email come "From" the right user with more metadata.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18748
Summary: Depends on D18746. See PHI174. Adds small author portraits next to each blame line (this is similar to GitHub).
Test Plan:
My local test data isn't that great since I don't have commits from a lot of accounts, but looks functional:
{F5251056}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18747
Summary:
Ref PHI174. This reverts most of these changes:
- 37843127e9 / D18481
- 94cad30ac3 / D18474
- 12ae08b6b1 / D18473
- 0a01334172 / D18462
- ac91ab1ef9 / D18452
These changes made the Diffusion blame view very similar to GitHub's blame view. See D18452 for a before/after of the bulk of these changes; the other revisions are bugfixes.
I think this was generally a step backward, and not motivated by solving a specific problem. I've found the new UI less usable than the old one, and at least one install (see PHI174) also has.
In particular, the revision/commit titles are very bulky and not terribly useful; the date column also isn't terribly useful; the "age" color actually IS pretty useful and was heavily de-emphasized.
I've kept one bugfix here (missing `'a'` tag type) and kept the upgraded icon for "Skip Past This Commit".
I'm going to follow this up with some additional changes:
- Show a small author profile icon, similar to GitHub, to address PHI174 more directly.
- Try a zebra-stripe on blocks of rows to make it more clear where changes affected by a particular commit begin and end.
- Try a hue shift, not just a brightness/saturation shift, to make the "age" color more distinct.
- Try computing colors as even steps, not based purely on age. Currently, if a file has one long-distant commit and several recent commits, all the recent ones show up as very bright green. I think this would probably be more useful if they were distributed more evenly across the available color bands.
Test Plan:
Viewed blame views in Diffusion, saw a more compact UI similar to the old UI.
{F5251019}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18746
Summary: Ref T2543. After D18731, Herald build rules run more often, but now incorrectly try to run builds when Diffusion closes a revision because a commit landed.
Test Plan: Made some mundane updates locally; this is tricky to test comprehensively locally so I'm mostly planning to just push it to `secure`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18745
Summary:
Ref T2543. Instead of autosubmitting revisions to "Needs Review" when builds finish, allow them to be held in "Draft" indefinitely.
There's currently no UI for this. I plan to just expose it as `arc diff --draft` for now, in a followup change.
Test Plan:
- Created a revision (via Conduit) with "hold as draft", saw it hold as draft after builds finished.
- Created a revision (normally), saw it autosubmit after builds finished.
- Requested review of a "hold as draft" revision to kick it out of draft state.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18737
Summary:
Depends on D18740. Prepares `arc` to receive a `--draft` flag by letting us switch to "differential.revision.edit" instead of "differential.createrevision".
To "differential.revision.edit", we need a transaction list, but we can't automatically construct this list from a field map. Return the transaction list alongside the field map.
The next change uses this list (if available) to switch us to the modern API method.
Test Plan: Ran `arc diff` on the experiemntal branch with followup changes, got a new revision.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18741
Summary: See PHI90. For now, this only provides a limited amount of information, but should satisfy the use case in PHI90 and build toward a more complete version in the future.
Test Plan: Used new Conduit method to retrieve information about diffs.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18744
Summary:
Ref T2543. Fixes T10109.
Currently, Herald only runs in Differential when a change updates the diff. This is partly for historical reasons, and partly because we don't want to restart builds every time someone makes a comment. However, this behavior is inconsistent with other applications (which always trigger on any change), and occasionally confusing to users (in T10109, for example) or otherwise undesirable.
A similar issue is that T2543 has introduced a "Draft" state, where revisions don't send normal mail until builds finish. This interacts poorly with "Send me an email" rules (which shouldn't do anything here) and particularly with "Send me an email + only run these actions the first time the rule matches", since that might have an effect like "do nothing when the revision is created, then never anything again since you already did nothing once".
To navigate both of these issues, let objects tell Herald that certain actions (like mail or builds) are currently forbidden. If a rule uses a field or action which is currently forbidden, the whole rule automatically fails before it executes, but doesn't count toward "only the first time" as far as Herald's tracking of rule execution is concerned.
Then, forbid mail for draft revisions, and forbid builds for revisions which didn't just get updated. Forbidding mail fixes the issues with "Send me an email" that were created by the introduction of the draft state.
Finally, make Herald run on every revision update, not just substantive updates to the diff. This resolves T10109.
Test Plan:
Created revisions via the draft -> submit workflow, saw different transcripts. Here's a mail action being forbidden for a draft:
{F5237324}
Here's a build action being forbidden for a "mundane" update:
{F5237326}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T10109, T2543
Differential Revision: https://secure.phabricator.com/D18731
Summary: Depends on D18734. See PHI176. We run this query on the main Drydock lease web UI, among other places. There is currently no `status` key which can satisfy it.
Test Plan:
Viewed Drydock lease page to get the query.
Ran ##explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;## before and after the change.
I don't have a ton of leases locally so the un-key'd EXPLAIN isn't //that// bad, but still shows that we're getting a better key. Before:
```
mysql> explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
| 1 | SIMPLE | drydock_lease | index | NULL | PRIMARY | 4 | NULL | 101 | Using where |
+----+-------------+---------------+-------+---------------+---------+---------+------+------+-------------+
1 row in set (0.00 sec)
```
After:
```
mysql> explain SELECT * FROM `drydock_lease` WHERE (status IN ('pending', 'acquired', 'active')) ORDER BY `id` DESC LIMIT 101;
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
| 1 | SIMPLE | drydock_lease | range | key_status | key_status | 130 | NULL | 5 | Using index condition; Using filesort |
+----+-------------+---------------+-------+---------------+------------+---------+------+------+---------------------------------------+
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18735
Summary: See PHI176. Depends on D18733. We issue a query when deleting files that currently doesn't hit any keys.
Test Plan:
Ran `./bin/remove destroy --force --trace F56376` to get the query.
Ran ##SELECT * FROM `file` WHERE storageEngine = 'blob' AND storageHandle = '23366' LIMIT 1## before and after the change.
Before:
```
mysql> explain SELECT * FROM `file` WHERE storageEngine = 'blob' AND storageHandle = '23366' LIMIT 1;
+----+-------------+-------+------+---------------+------+---------+------+-------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------+------+---------------+------+---------+------+-------+-------------+
| 1 | SIMPLE | file | ALL | NULL | NULL | NULL | NULL | 33866 | Using where |
+----+-------------+-------+------+---------------+------+---------+------+-------+-------------+
1 row in set (0.01 sec)
```
After:
```
mysql> explain SELECT * FROM `file` WHERE storageEngine = 'blob' AND storageHandle = '23366' LIMIT 1;
+----+-------------+-------+------+---------------+------------+---------+-------------+------+------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-------+------+---------------+------------+---------+-------------+------+------------------------------------+
| 1 | SIMPLE | file | ref | key_engine | key_engine | 388 | const,const | 190 | Using index condition; Using where |
+----+-------------+-------+------+---------------+------------+---------+-------------+------+------------------------------------+
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18734
Summary: See PHI176. This is issued periodically by the garbage collector. Normally this table is relatively small-ish so this missing key isn't hugely noticeable.
Test Plan:
Ran `./bin/garbage collect --collector daemon.processes --trace` to get the query the GC runs.
Ran ##DELETE FROM `daemon_logevent` WHERE epoch < 1508443504 LIMIT 100## before and after the key, saw a much better query plan afterward:
Before:
```
mysql> explain DELETE FROM `daemon_logevent` WHERE epoch < 1508443504 LIMIT 100;
+----+-------------+-----------------+------+---------------+------+---------+------+-------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-----------------+------+---------------+------+---------+------+-------+-------------+
| 1 | SIMPLE | daemon_logevent | ALL | NULL | NULL | NULL | NULL | 19325 | Using where |
+----+-------------+-----------------+------+---------------+------+---------+------+-------+-------------+
1 row in set (0.00 sec)
```
After:
```
mysql> explain DELETE FROM `daemon_logevent` WHERE epoch < 1508443504 LIMIT 100;
+----+-------------+-----------------+-------+---------------+-----------+---------+-------+------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra |
+----+-------------+-----------------+-------+---------------+-----------+---------+-------+------+-------------+
| 1 | SIMPLE | daemon_logevent | range | key_epoch | key_epoch | 4 | const | 1 | Using where |
+----+-------------+-----------------+-------+---------------+-----------+---------+-------+------+-------------+
1 row in set (0.00 sec)
```
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18733
Summary: See PHI176. We issue a query with only `artifactIndex` from `BuildTarget`, but don't have an applicable key.
Test Plan: This isn't on the normal Harbormaster execution path so I'm not 100% sure I have a local repro, but will confirm with customer.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18732
Summary: See PHI177. Ref T12974. PonderQuestion was overlooked during the Ferret engine conversions.
Test Plan:
Ran migrations, searched for questions, got results:
{F5241185}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12974
Differential Revision: https://secure.phabricator.com/D18736
Summary:
Ref T2543. When Harbormaster finishes builds and promotes a draft revision to review, we currently publish "Harbormaster requested review of...".
Instead, attribute this action to the author, since that's more natural and more useful.
Test Plan: Promoted a diff locally, saw it attributed to me rather than Harbormaster.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18730
Summary:
See PHI165. See D18715. These objects (projects, blogs) also need implementations now.
(I thought about making this method `abstract` or doing try/catch to maybe make this more robust, but I think this should be the end of it, and those changes have mild complexity/compatibility/risk issues.)
Test Plan: Changed `bin/search index` to index only one document of each type, ran `bin/search index --all --force`, saw no more comment-related errors.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18729
Summary: Ref T12680. Use the slightly sleeker construction from D18722 in Differential.
Test Plan: Viewed revision list, reordered by date modified.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12680
Differential Revision: https://secure.phabricator.com/D18727
Summary:
Ref T12680. See PHI167. See that task for discussion.
Rewrite `DiffusionCommitQuery` to work more like `DifferentialRevisionQuery`, and use a UNION to find "all revisions you need to audit OR respond to".
I tried to get this working a little more cleanly than RevisionQuery does, and can probably simplify that now.
Test Plan: Poked at the UI locally without hitting any apparent issues, but my local data is pretty garbage at this point. I'll take a look at how the query plans work on `secure`.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12680
Differential Revision: https://secure.phabricator.com/D18722
Summary:
Ref T2543. When a revision is created, we check if any builds are waiting/failed, and submit it for review immediately if we aren't waiting for anything.
In doing this, we ignore builds with only autotargets, since these are client-side and failures from local `arc lint` / `arc unit` should not count (the user has already chosen to ignore/skip them).
The way we do this has some issues:
- Herald may have started builds, but they may still be PENDING and not have any targets yet. In this case, we'll see "no non-autotargets" and ignore the build, which is wrong.
- We have to load targets but don't really care about them, which is more work than we really need to do.
- And it's kind of complex, too.
Instead, just let `BuildQuery` filter out "autobuilds" (builds generated from autoplans) with a JOIN.
Test Plan: Ran `arc diff` with builds configured, got a clean "Draft" state instead of an incorrect promotion directly to "Needs Review".
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18721
Summary:
See PHI158. In the RefEngine, we test if any old branch positions have been removed from the repository. This is uncommon (but not impossible) in Mercurial, and corresponds to users deleting branches in Git.
Currently, we end up running `hg log` for each position, in parallel. Because of Python's large startup overhead, this can be resource intensive for repositories with a large number of branches.
We have to do this in the general case because the caller may be asking us to resolve `tip`, `newfeature`, `tip~3`, `9`, etc. However, in the specific case where the refs are 40-digit hashes, we can bulk resolve them if they exist, like this:
```
hg log ... --rev (abcd or def0 or ab12 or ...)
```
In the general case, we could probably do less of this than we currently do (instead of testing all old heads, we could prune the list by removing commits which we know are still pointed to by current heads) but that's a slightly more involved change and the effect here is already dramatic.
Test Plan:
Verified that CPU usage drops from ~110s -> ~0.9s:
Before:
```
epriestley@orbital ~/dev/phabricator $ time ./bin/repository refs nss
Updating refs in "nss"...
Done.
real 0m14.676s
user 1m24.714s
sys 0m21.645s
```
After:
```
epriestley@orbital ~/dev/phabricator $ time ./bin/repository refs nss
Updating refs in "nss"...
Done.
real 0m0.861s
user 0m0.882s
sys 0m0.213s
```
- Manually resolved `blue`, `tip`, `9`, etc., got expected results.
- Tried to resolve invalid hashes, got expected result (no resolution).
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18717
Summary: See rPcd14194a329788d5fff6365bcade278fd18f3612 for a similar change. Implement `getApplicationTransactionCommentObject()` to return `null` explicitly.
Test Plan: Ran `bin/search index --type ownerspackage`, got indexing after change.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18715
Summary: Ref T2543. When revisions are in the draft state, tell the user what we're waiting for or why they aren't moving forward.
Test Plan: {F5228840}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18714
Summary: Ref T2543. This is a less ambitious version of the rule in D18628, which I backed off from, since I think this probably still has a fair number of loose ends to tie up.
Test Plan: Created a revision locally.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18713
Summary:
Ref T13000. Since other changes have generally made the ngrams table manageable, I'm not planning to enable common ngrams by default at this time.
Instead, make the threshold configurable with "--threshold" so we can guide installs through tuning this if they want (e.g. PHI110), and tune hosted instances.
(This might eventually become automatic, but just smoothing this bit off for now feels reasonable to me.)
Test Plan: Ran with `--reset`, and with various invalid and valid `--threshold` arguments.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18710
Summary: See PHI147.
Test Plan: Called the method from the web UI, got sensible results.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18706
Summary:
Depends on D18702. Ref T13008. This replaces the old hard-coded single rate limit with multiple flexible limits, and defines two types of limits:
- Rate: reject requests if a client has completed too many requests recently.
- Connection: reject requests if a client has too many more connections than disconnections recently.
The connection limit adds +1 to the score for each connection, then adds -1 for each disconnection. So the overall number is how many open connections they have, at least approximately.
Supporting multiple limits will let us do limiting by Hostname and by remote address (e.g., a specific IP can't exceed a low limit, and all requests to a hostname can't exceed a higher limit).
Configuring the new limits looks something like this:
```
PhabricatorStartup::addRateLimit(new PhabricatorClientRateLimit())
->setLimitKey('rate')
->setClientKey($_SERVER['REMOTE_ADDR'])
->setLimit(5);
PhabricatorStartup::addRateLimit(new PhabricatorClientConnectionLimit())
->setLimitKey('conn')
->setClientKey($_SERVER['REMOTE_ADDR'])
->setLimit(2);
```
Test Plan:
- Configured limits as above.
- Made a lot of requests, got cut off by the rate limit.
- Used `curl --limit-rate -F 'data=@the_letter_m.txt' ...` to upload files really slowly. Got cut off by the connection limit. With `enable_post_data_reading` off, this correctly killed the connections //before// the uploads finished.
- I'll send this stuff to `secure` before production to give it more of a chance.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13008
Differential Revision: https://secure.phabricator.com/D18703
Summary:
Ref T13008. Depends on D18701. The overall goal here is to make turning `enable_post_data_reading` off not break things, so we can run rate limiting checks before we read file uploads.
The biggest blocker for this is that turning it off stops `$_FILES` from coming into existence.
This //appears// to mostly work. Specifically:
- Skip the `max_post_size` check when POST is off, since it's meaningless.
- Don't read or scrub $_POST at startup when POST is off.
- When we rebuild REQUEST and POST before processing requests, do multipart parsing if we need to and rebuild FILES.
- Skip the `is_uploaded_file()` check if we built FILES ourselves.
This probably breaks a couple of small things, like maybe `__profile__` and other DarkConsole triggers over POST, and probably some other weird stuff. The parsers may also need more work than they've received so far.
I also need to verify that this actually works (i.e., lets us run code without reading the request body) but I'll include that in the change where I update the actual rate limiting.
Test Plan:
- Disabled `enable_post_data_reading`.
- Uploaded a file with a vanilla upload form (project profile image).
- Uploaded a file with drag and drop.
- Used DarkConsole.
- Submitted comments.
- Created a task.
- Browsed around.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13008
Differential Revision: https://secure.phabricator.com/D18702
Summary:
Ref T13000. Garbage collecting common ngrams is slow because MySQL isn't all that great at deleting rows quickly. See PHI96, where it looks like it's going to take a week to GC ngrams for a ~million objects at a relatively conservative 0.15 threshold.
In the event of a restore, we can reduce the impact by persisting this table so the ngrams just don't get built when the reindex happens.
Test Plan: Viewed schema in Config, saw common ngrams tables marked as "Data" instead of "Index".
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18696
Summary: Noticed a couple of typos in the docs, and then things got out of hand.
Test Plan:
- Stared at the words until my eyes watered and the letters began to swim on the screen.
- Consulted a dictionary.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley, yelirekim, PHID-OPKG-gm6ozazyms6q6i22gyam
Differential Revision: https://secure.phabricator.com/D18693
Summary:
Ref PHI109. Ref T11786. We currently test elapsed time every 64 iterations (since iterations are normally very fast), but at least one install is seeing the page timeout after 30 seconds.
One reason could be that cache fills may occur, and are likely to be much slower than normal iterations. In an extreme case, we could do 64 cache fills before checking the time. Tweak thing so that we always check the time after doing a cache fill, regardless of how many iterations have elapsed since the last attempt.
Additionally, this API method currently accepts an arbitrary number of paths, but implicitly limits each cache query to 500ms. If more than 60 paths are passed, this may exceed 30s. Only let the cache churn for a maximum of 10s across all paths.
If this is more the latter issue than the former, this might replace the GraphCache timeouts with `git` timeouts, but at least our understanding of what's going on here will improve.
Test Plan: This is difficult to test convincingly locally, since I can't reproduce the original issue. It still works after these changes, but it worked fine before these changes too.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11786
Differential Revision: https://secure.phabricator.com/D18692
Summary:
Ref T13000. Currently, queries can only be executed from the web UI, which requires logging in as a user. I really want to avoid doing that wherever we can, but being able to execute queries on an instance (and, particularly, see the ngrams and timings on the underlying lookups) would have been helpful in several cases.
Improve tooling a bit in advance of the "common ngrams" stuff going out since it seems likely that it will be useful if issues arise.
Test Plan: Ran `bin/search query --query ...`, got useful minimal output. Ran with `--trace` to get internals.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18690
Summary:
Ref T13000. After an ngram is marked as "common", we can delete it from the storage table.
Currently, the only way to get ngrams marked as "common" is to manually run `bin/search ngrams`, so this has no impact on normal installs.
Test Plan: Ran `bin/garbage collect`, saw it start chewing through my local Maniphest ngrams table and removing common ngrams.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18687
Summary:
Ref T13000. This marks each table as either "data" (normal data), "cache" (automatically rebuilt, no need to ever dump) or "index" (can be manually rebuilt).
By default, `bin/storage dump` dumps data and index tables, but not cache tables.
With `--no-indexes`, it dumps only data tables. Indexes can be rebuilt after a restore with `bin/search index --all ...`.
Test Plan:
- Ran `--no-indexes` and normal dumps with `--trace`, verified that cache and index (former case) or cache only (latter case) tables were dumped with `--no-data`.
- Verified dump has the same number of `CREATE TABLE` statements as before the changes.
- Reviewed persistence tags in the web UI (note Ferret engine tables are "Index"):
{F5210886}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18682
Summary:
If `account.editable` is set to false, we try to add a `null` button and fatal:
> Argument 1 passed to PHUIHeaderView::addActionLink() must be an instance of PHUIButtonView, null given, called in /srv/phabricator/phabricator/src/applications/settings/panel/PhabricatorSettingsPanel.php on line 290
Instead, don't try to render `null` as a button.
Test Plan:
- Configured `account.editable` false.
- Viewed email address settings.
- Before: fatal.
- After: page works, no button is provided.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18677
Summary:
Depends on D18672. Ref T13000. This does an on-demand build of the common ngrams table.
Plan here is:
- Push to `secure`.
- Build the common ngrams table here.
- See if stuff breaks?
If it looks okay on this dataset, we can build out the GC support and try it in production.
Test Plan:
- Locally, my dataset has a bunch of `bin/lipsum` tasks with similar, common words.
- Verified that ipsum terms now skip ngrams. For "lorem ipsum" search performance actually IMPROVED by skipping the ngrams table (12s to 9s).
- Queried for normal terms, got very fast results using the ngram table, as normal.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18673
Summary:
Ref T13000. This adds support for tracking "common" ngrams, which occur in too many documents to be useful as part of the ngram index.
If an ngram is listed in the "common" table, it won't be written when indexing documents, or queried for when searching for them.
In this change, nothing actually writes to the "common" table. I'll start writing to the table in a followup change.
Specifically, I plan to do this:
- A new GC process updates the "common" table periodically, by writing ngrams which appear in more than X% of documents to it, for some value of X, if there are at least a minimum number of documents (maybe like 4,000).
- A new GC process deletes ngrams that have been added to the common table from the existing indexes.
Hopefully, this will pare down the ngrams index to something reasonable over time without requiring any manual tuning.
Test Plan:
- Ran some queries and indexes.
- Manually inserted ngrams `xxx` and `yyy` into the ngrams table, searched and indexed, saw them ignored as viable ngrams for search/index.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T13000
Differential Revision: https://secure.phabricator.com/D18672
Summary:
See PHI112. The install presumably wants to generate links to Diffusion commits from an external tool, but only knows the short name of the repository.
Provide a `/source/phabricator/commit/abcdef908273` URI which redirects to the canonical URI for the commit.
Test Plan:
- Visited `/source/` URI for a commit, got a redirect.
- Visited normal URI for a commit, got a commit page.
- Visited `/branches/` and `/tags/` for a `/source/` repository, got proper pages.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18676
Summary:
See PHI94. I considered this initially but wasn't sure about it. However, PHI94 brings up the good point that we already use a similar rule in Maniphest.
For consistency, only show visible columns here too.
Test Plan: Used "Move tasks to column..." on a board with visible and hidden columns, only saw visbile columns offered in the dropdown.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18668
Summary:
See <https://discourse.phabricator-community.org/t/daemons-tasks-crashing-in-a-loop-during-reindex/506/1>. Some object types (for example, Passphrase Credentials) support indexing but not commenting.
Make `withComments(...)` work properly if the transaction type does not support comments.
Test Plan:
Indexed a credential (no comments) and a revision (comments) with `bin/search index --trace ...`.
Before, credential fataled.
After, credetial succeeds, and skips the transaction query.
Before and after, the revision queries the transaction table.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18667
Summary:
Ref T5523. See PHI50. See PHI40. This isn't perfect, but should improve things.
Add a "Move tasks to column..." action to workboards which moves all visible tasks in a column to another column, either on the same board or on a different board.
This is a two-step process so that I don't have to write Javascript, and because I'm not 100% sure this is what users actually want/need. If it sticks, the UI could be refined later.
- The first dialog asks you to choose a project, defaulting ot the current project.
- The second dialog asks you to choose a column on that project's board.
Test Plan:
- Moved tasks on the same board.
- Moved tasks to a different board.
- Tried to move tasks to the starting column, got a sensible error.
- Tried to move tasks to no project, got a sensible error.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T5523
Differential Revision: https://secure.phabricator.com/D18665
Summary:
Ref PHI91. When Owners (or Herald, or manual user action) adds package reviewers to a revision, later updates to the revision make some of them less relevant or irrelevant.
Provide a hint when a package reviewer doesn't own any of the paths that a diff changes. Humans can then decide if the reviewer is obsolete/irrelevant or not.
This is a rough cut to get the feature working, design could probably use some tweaking if it sticks.
Test Plan: {F5204309}
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: jboning
Differential Revision: https://secure.phabricator.com/D18663
Summary:
Ref PHI101. It looks like this was maybe copy/pasted by mistake in recent design refactoring.
We need to pass the full path, not the `basename()` of the path, to the search form.
Test Plan: Searched inside `scripts/test/`, found results inside `scripts/test/`.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18664
Summary:
Ref T12997. Although we can't query by transaction type (since we can't easily enumerate all possible types which may have comments -- inline types may also have comments), we //can// just check if there's a comment row or not.
This reduces the amount of garbage we need to load to rebuild indexes for unusual objects with hundreds and hundreds of mentions.
Test Plan:
- Used batch editor to mention a task 700 times.
- Indexed it before and after this change, saw index time drop from {nav 1600ms > 160ms}.
- Made some new comments on it, verified that they still indexed/queried properly.
- Browsed around, made normal transactions, made inline comments.
- Added a unique word to an inline comment, indexed revision, searched for word, found revision.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12997
Differential Revision: https://secure.phabricator.com/D18660
Summary:
Ref T12997. See that task for more details. Briefly, an unusual dataset (where commits are mentioned hundreds of times by other commits) is causing some weird memory behavior in the daemons.
Forcing PHP to GC cycles explicitly after each task completes seems to help with this, by cleaning up some of the memory between tasks. A more thorough fix might be to untangle the `$xactions` structure, but that's significantly more involved.
Test Plan:
- Did this locally in a controlled environment, saw an immediate collection of a 500MB `$xactions` cycle.
- Put a similar change in production, memory usage seemed less to improve. It's hard to tell for sure that this does anything, but it shouldn't hurt.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12997
Differential Revision: https://secure.phabricator.com/D18657
Summary:
See PHI87. Ref T12974. The `array_slice()` method of splitting the string apart can perform poorly for large input strings. I think this is mostly just the large number of calls plus building and returning an array being not entirely trivial.
We can just use `substr()` instead, as long as we're a little bit careful about keeping track of where we're slicing the string if it has UTF8 characters.
Test Plan:
- Created a task with a single, unbroken blob of base64 encoded data as the description, roughly 100KB long.
- Saw indexing performance improve from ~6s to ~1.5s after patch.
- Before: https://secure.phabricator.com/xhprof/profile/PHID-FILE-nrxs4lwdvupbve5lhl6u/
- After: https://secure.phabricator.com/xhprof/profile/PHID-FILE-6vs2akgjj5nbqt7yo7ul/
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12974
Differential Revision: https://secure.phabricator.com/D18649
Summary:
See PHI87. Ref T12974. Currently, we do a lot more work here than we need to: we call `phutil_utf8_strtolower()` on each token, but can do it once at the beginning on the whole block.
Additionally, since ngrams don't care about order, we only need to convert unique tokens into ngrams. This saves us some `phutil_utf8v()`. These calls can be slow for large inputs.
Test Plan:
- Created a ~4MB task description.
- Ran `bin/search index Txxx --profile ...` to profile indexing performance before and after the change.
- Saw total runtime drop form 38s to 9s.
- Before: <https://secure.phabricator.com/xhprof/profile/PHID-FILE-wiht5d7lkyazaywwxovw/>
- After: <https://secure.phabricator.com/xhprof/profile/PHID-FILE-efxv56q2hulr6kjrxbx6/>
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12974
Differential Revision: https://secure.phabricator.com/D18647
Summary:
Fixes T12995. Currently, the result highlighter (which shows //where// terms matched) only works in "term" mode, not in "substring" mode.
Provide better feedback and behvaior:
- When a term is a substring term, color it a little differently and add a tooltip. (This is partly to make it easier to debug/diagnose things, probably not enormously valuable to users.)
- When a term is a substring term, highlight it anywhere in the results.
Test Plan:
Queried for latin and CJK terms.
Here is CJK being highlighted:
{F5192195}
Here is substring vs non-substring implicit behavior:
{F5192196}
Here's ONLY terms being highlighted:
{F5192198}
Here's terms and substrings, since the query now has a substring:
{F5192201}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12995
Differential Revision: https://secure.phabricator.com/D18635
Summary:
Ref T2543. This doesn't stand alone since mail still goes out normally, but gets this piece working: new revisions start as "Draft", then after updates if there are no builds they go into "Needs Review".
This should work in general because builds update revisions when they complete, to publish a "Harbormaster finished build yada yada" transaction. So either we'll un-draft immediately, or un-draft after the last build finishes.
I'll hold this until the mail and some other stuff (like UI hints) are in slightly better shape since I think it's probably too rough on its own.
Test Plan: Created revisions locally, saw them un-draft after builds.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18628
Summary:
Ref T2543. Currently, we always do some special things when a revision is created, mostly adding more stuff to the mail.
With drafts, we want to suppress initial mail and send this big, rich mail only when the revision actually moves out of "draft".
Prepare the code for this, with the actual methods hard-coded to the current behavior. This will probably take some tweaking but I think I got most of it.
Test Plan: Banged around in Differential so it sent some mail, saw normal mail without anything new.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18627
Summary:
Ref T2543. Most actions are not available for drafts.
Authors can "Request Review" (move out of draft to become a normal revision) or "Abandon".
Non-authors can't do anything (maybe we'll let them do something later -- like "Commandeer"? -- if there's a good reason).
Test Plan: Viewed a draft revision as an author and non-author, saw fewer actions available.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18626
Summary: See PHI79. When you edit another user's SSH keys (normally, for a bot account) we currently redirect you to an older URI.
Test Plan:
- Viewed a bot's profile page.
- Clicked "Edit Settings" on the Manage page.
- Went to "SSH Keys".
- Uploaded an SSH key.
- Before: redirected to a 404 after finishing the workflow.
- After: redirected to the same page after the workflow.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18633
Summary:
See PHI78. The user was getting this message and (reasonably) interpreted it to mean "reset mail can never be sent to unverified addresses".
Reword it to be more clear, albeit an entire paragraph long. I don't really have a good solution in these cases where we'd need a whole page to explain what's happening (this, plus "we can't tell you which address you should use because an attacker could get information if we did" and "this rule defuses the risk that an opportunistic attacker may try to compromise your account after you add an email you don't own by mistake"). We could write it up separately and link to it, but I feel like that stuff tends to get out of date.
Just land somewhere in the middle.
Test Plan: {F5189105}
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18630
Summary:
Ref T2543. There's no way to put revisions into this state yet, but start adding support for when there is.
Adds the status constant, plus support for bucketing them.
Test Plan:
- Manually put a revision in "Draft" state by updating the database directly.
- Verified my drafts showed up in a "Drafts" section on the bucket view.
- Verified others' drafts did not appear on the action bucket view.
- Viewed revisions, queried for "Draft" revisions, etc (stuff we get for free).
{F5186781}
{F5186782}
{F5186783}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18625
Summary:
Fixes T12986. I caught this bug in the changes from D18584: when we moved a large hunk to file storage, we would decompress it but keep the "deflated" flag. This could cause confusion when loading it later. I missed this in testing since I wasn't exhaustive enough in checking hunks and didn't run into a compressed one.
Instead of compressing on `save()`, compress during the normal workflow.
We currently never advise users to run this workflow so I didn't bother trying to clean up possible existing migrations.
Test Plan:
- Ran `bin/differential migrate-hunk` on compressed hunks, moving them to and from file storage. Saw them work correctly and remain compressed.
- Created new small (uncompressed) and large (compressed) hunks, verified they work properly and get compressed (if applicable).
- Used `bin/cache purge --caches changeset` to clear changeset caches and make sure the actual table was being hit.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12986
Differential Revision: https://secure.phabricator.com/D18624
Summary:
See PHI71. These didn't get properly updated when we wrote Subprojects and Milestones, and should use materialized members, not raw members. Swap the query so projects you are an indirect member of (e.g., milestones you are a member of the parent for, and parent projects you are a member of a subproject of) are included in the result list.
Also fix a bad typeahead datasource.
Test Plan:
- Ran a dry run with the test console, saw project PHIDs for milestones and parent projects in the raw field value.
- Tried to set "Author's projects" to a user, no longer could.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18619
Summary:
Ref T11823. I think this is the last callsite which relies on the old data format: `bin/repository parents` rebuilds a cache which we don't currently use very heavily.
Update it to work with the new data.
Test Plan: Ran `bin/repository parents <repository> --trace`, saw successful script execution and reasonable-looking output.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18615
Summary:
Ref T11823. This is the meaty part of the change, and updates `RefEngine` to use separate RefCursor (for names) and RefPosition (for actual commit positions) tables.
I'll hold this whole series until after the release cut so it has some time to bake on `secure` to look for issues. It's also not a huge problem if there are bugs here since these tables are just caches anyway, although they do feed into some other things, and obviously it's never good to have bugs.
Test Plan:
- This logic can be invoked directly with `bin/repository refs <repository> --trace --verbose`.
- Ran that on unchanged repositories, new branches, removed branches, and modified branches. Saw appropriate output and cursor positions.
- Ran on a mercurial repository to test the close/open logic, saw it correct open/closed state of incorrect positions.
- Browed around Diffusion in various repositories.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18614
Summary:
Ref T11823. This change isn't standalone, but prepares for the more involved code change by dropping obsolete columns from the RefCursor table and adding the unique key we need to prevent the ambiguous/duplicate refs issue.
This data was moved to the RefPosition table in D18612.
Test Plan: Ran storage upgrade. See next revision for more substantial testing of this change series.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18613
Summary:
Ref T11823. Currently, we have a "RefCursor" table which stores rows like `<branch or tag name, commit it is pointing at>` with some more data.
Because Mercurial can have a single branch pointing at several different places, this table must allow multiple rows with the same branch or tag name.
Among other things, this means there isn't a single PHID which can be used to identify a branch name in a stable way. However, we have several UIs where we want to be able to do this.
Some specific examples where we run into trouble: in Mercurial, if there are 5 heads for "default", that means there are 5 phids. And currently, if someone deletes a branch, we lose the PHID for it. Instead, we'd rather retain it so the whole world doesn't break if you accidentally delete a branch and then fix it a little later.
(I'll likely hold this until the rest of the logic is fleshed out a little more in followup changes.)
Test Plan: Ran `bin/storage upgrade`, saw the table get created without warnings.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18602
Summary:
See <https://discourse.phabricator-community.org/t/unable-to-use-current-mercurial-on-debian-stretch/391>.
The Mercurial commit is helpful in particular: <https://www.mercurial-scm.org/repo/hg/rev/77eaf9539499>
We weren't vulnerable to the security issue (users can not control any part of the command) but pass the working directory explicitly to get past the new safety check.
I left `setCWD()` in place (a few lines below) just because it can't hurt, and in some other contexts it sometimes matter (for example, if commit hooks execute, they might inherit the parent CWD here or in other VCSes).
Test Plan:
- Cloned from a Mercurial repo locally over HTTP.
- Verified that SSH cloning already uses `-R` (it does, see `DiffusionMercurialServeSSHWorkflow`).
- Did not actually upgrade to Mercurial 4.0/4.1.3 to completely verify this, but a user in the Discourse thread asserted that a substantially similar fix worked correctly.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18611
Summary: See T12414. This just gets started; we still need edit endpoints for network interfaces and bindings.
Test Plan: Created some devices/services from the conduit UI.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18605
Summary:
See PHI66. See that issue for context. This UI is bad broken legacy junk, but was especially broken when reporting merges.
These do not currently generate a "status" transaction, so they were never counted as task closures. Pretend they're normal closures.
This is still wrong, but should be much closer to the real numbers. Specifically, if you merge a closed task into another task, it will incorrectly be counted as an extra close. This could result in negative tasks, but the numbers should be much closer to reality than they are today even so.
The "Facts" application (T1562) is the real pathway forward here in the longer term.
Test Plan:
- Moved my `maniphest_transactions` table aside with `RENAME TABLE ...`.
- Created a new empty table with `CREATE TABLE ... LIKE ...`.
- Reloaded reports UI, saw empty chart.
- Created, closed, and reopened tasks while reloading the chart, saw accurate reporting.
- Merged an open task into another task, saw bad reporting.
- Applied patch, saw the right chart again.
Reviewers: amckinley
Reviewed By: amckinley
Differential Revision: https://secure.phabricator.com/D18601
Summary:
Ref T11823. See PHI68. T11823 has a full description of this issue and a plan to fix it, but the full plan is relatively complicated.
Until that can happen, provide a workaround for the biggest immediate issue, where multiple copies of a ref cursor can cause `executeOne()` to throw, since it expects a single result. In practice, these copies are always identical so we can just pick the first one.
This will get cleaned up once T11823 is fixed properly.
Test Plan:
Forced the table into a duplicate/ambiguous state, reproduced a similar-looking error:
{F5180999}
Applied the patch, got the "Land" to work as expected:
{F5181000}
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11823
Differential Revision: https://secure.phabricator.com/D18599
Summary:
Ref T12033. This is a very narrow fix for this issue, but it should fix the major error: don't attach patches if they're bigger than the mail body limit (by default, 512KB).
Specifically, the logs from an install in T12033 show a 112MB patch being attached, and that's the biggest practical problem here.
I'll follow up on the tasks with more nuanced future work.
Test Plan: Enabled `differential.attach-patches`, saw a patch attached to email. Set the byte limit very low, saw patches get thrown away.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12033
Differential Revision: https://secure.phabricator.com/D18598
Summary:
Fixes T12979. In D18457, we added a "No Notifications" setting to let users disable the blue and yellow pop-up notifications that alert you when an object has been updated, since some users found them distracting.
However, the change made "do nothing" the default, so all other `JX.Notification` callsites -- which never pass a preference -- were effectively turned off no matter what your setting was set to. This includes the "Read-Only" mode warning (grey), the "High Security" mode warning (purple), the "timezone" warning, and a few others.
Tweak things a little bit so the setting applies to ONLY blue and yellow ("object you're following was updated" / "this object was updated") notifications, not other types of popup notifications.
Test Plan:
- With notifications on in settings, got blue notifications and "Read-only".
- With notifications off in settings, got "Read-only" but no blue notifications.
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T12979
Differential Revision: https://secure.phabricator.com/D18600
Summary: Ref T12819. Swaps constants so existing configurations that use a "mysql" engine now use the Ferret engine, not an InnoDB/MyISAM FULLTEXT engine.
Test Plan: Swapped my local config back to "mysql" (the default), saw Ferret engine results in the UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18590
Summary:
Ref T12819. These render the little "Searched For: X, Y, U V" hint about how something was parsed.
(This might get a "substring" color or "title only" color or something in the future.)
Test Plan: {F5178807}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18589
Summary:
Ref T12819. Obsoleted by the Ferret engine "Query" field.
This is a compatibility break, I'll note it in the changelog.
Test Plan: Searched for repositories by name with "Query" instead of "Name Contains".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18588
Summary:
Ref T12819. Show the new Ferret engine fields (and enable the indexer) unconditionally.
Also pull them to the top since they're fairly general-purpose and appear more broadly now, and also they actually work correctly (WOW).
Some redundant fields (like "Name Contains" in Repositories and Owners) could probably be removed now, I may clean those up in a followup.
Test Plan: Browsed around, saw Ferret fields in UI without "(Prototype)" suffix.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18587
Summary:
Ref T12819. Obsoleted by the Ferret engine, which is unprototyping shortly.
This breaks compatibility in two ways:
- `maniphest.query` no longer supports "fullText" (now throws an explicit exception).
- Existing saved searches with a "Contains Words" constraint will no longer have that constraint.
It seems unlikely (?) that either of these are seeing too much use, and they should be easy to fix. I'll note them in the changelog.
Test Plan: Viewed Maniphest, no more "Contains Words" field. Called `maniphest.query` with "fullText", got explicit exception.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18586
Summary:
Ref T12932. For long-lived installs, one of the largest tables tends to be the hunk data table. Although it doesn't grow tremendously fast, it's also well suited to storage in Files instead of the database (infrequent access, relatively large blobs of data, mostly one-at-a-time access), and earlier work anticipated eventually adding support for Files storage.
Make Files storage work, and provide `bin/differential migrate-hunk` to manually test/migrate hunks. This is currently the only way hunks get moved to file storage, but I expect to add a GC step which moves them to File storage after 30 days shortly.
The immediate motivation for this is to relieve storage pressure on db001/db002 so we have more headroom for deploying the Ferret engine and its larger indexes (see also T12819).
Test Plan:
- Used `bin/differential migrate-hunk` to move a hunk to and from file storage, verified it survived intact.
- Downloaded the actual stored file, sanity-checked it. Verified permissions.
- Destroyed a diff with `bin/remove destroy`, saw the hunk and file storage destroyed.
- Verified that going from file -> text destroys the old file properly with `migrate-hunk --trace ...`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12932
Differential Revision: https://secure.phabricator.com/D18584
Summary:
Ref T12819. The "full" field has all other fields, and the "core" field has "title" and "body". Due to the way the "full" and "core" fields were being built, the "core" field also got included in the "full" field, so the "full" field has two copies of the title, two copies of the body, and then one copy of everything else.
Put only one copy of each distinct thing in each "full" and "core". Also, simplify the logic a little bit so we build these virtual fields in a more consistent way.
Test Plan: Ran `bin/search index` and looked at the fields in the database, saw less redundant information.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18580
Summary:
Ref T12819. Currently, strings are split only on spaces, but newlines (and, if they exist, tabs) should also split strings.
Without this, we can fail to get the proper term boundary tokens for words which begin at the start of a line or end at the end of a line.
Test Plan: Reindexed a document with "xyz\nabc", saw `"yz "` and `" ab"` term boundary tokens generate properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18579
Summary: Miss this with earlier pass, updates the VCS password page.
Test Plan: Try to set a vcs password
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18574
Summary: Ref T12819. More ferret engine support.
Test Plan: Indexed and searched commits and repositories.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18572
Summary: Ref T12819. Support for Pholio.
Test Plan: Indexed and searched mocks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18569
Summary: Ref T12819. Adds ferret engine support for Calendar events.
Test Plan: Indexed and queried calendar events.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18568
Summary: Ref T12819. Adds Ferret engine support.
Test Plan: Indexed and searched for documents.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18567
Summary: Ref T12819. Adds support for projects.
Test Plan: Indexed and searched for projects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18566
Summary: Ref T12819. Mostly straightforward, with a couple of minor query modernization things.
Test Plan: Indexed and searched for posts and blogs.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18565
Summary: Ref T12819. Same deal as before, but smaller diffs after D18559.
Test Plan: Indexed and searched for packages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18564
Summary:
See brief discussion in D18554. All the index tables are the same for every application (and, at this point, seem unlikely to change) and we never actually pass these objects around (they're only used internally).
In some other cases (like Transactions) not every application has the same tables (for example, Differential has extra field for inline comments), and/or we pass the objects around (lots of stuff uses `$xactions` directly).
However, in this case, and in Edges, we don't interact with any representation of the database state directly in much of the code, and it doesn't change from application to application.
Just automatically define document, field, and ngram tables for anything which implements `FerretInterface`. This makes the query and index logic a tiny bit messier but lets us delete a ton of boilerplate classes.
Test Plan: Indexed objects, searched for objects. Same results as before with much less code. Ran `bin/storage upgrade`, got a clean bill of health.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18559
Summary: Ref T12819. Adds Ferret support to Passphrase.
Test Plan: Indexed credentials, searched for credentials.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18556
Summary: Ref T12819. Adds Ferret engine support to initiatives.
Test Plan: Indexed and searched for initiatives.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18555
Summary: Ref T12819. Prepares for Ferret engine support.
Test Plan: Queried for various initiatives.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18554
Summary: Ref T12819. Prepares Fund to move to Ferret.
Test Plan: Searched for initiatives in Fund.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18553
Summary:
Ref T12819. Adds support for indexing user accounts so they appear in global fulltext results.
Also, always rank users ahead of other results.
Test Plan: Indexed users. Searched for a user, got that user.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18552
Summary:
Ref T12819. Currently, under the Ferret engine, we query each application's index separately and then aggregate the results.
At the moment, results are aggregated by type first, then by actual rank. For example, all the revisions appear first, then all the tasks.
Instead, surface the internal ranking data from the underlying query and sort by it.
Test Plan: Searched for "A B" with a task named "A B" and a revision named "A". Saw task first. Broadly, saw mixed task and revision order in result sets.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18551
Summary:
Ref T12819. I started trying to get individual engines to drive these constraints (e.g., `ManiphestTaskQuery` can do most of the work) but this is a big pain, especially since most engines don't support "any owner" or "no owner", and not everything has an owner, and so on and so on. Going down this path would have meant a huge pile of stub functions everywhere, I think.
Instead, drive these through the main engine using the fulltext document table, which already has everything we need to apply these constraints in a uniform way.
Also tweak some parts of query construction and result ordering.
Test Plan: Searched for documents by author, owner, unowned, any owner, tags, subscribers, fulltext in global search. Got sensible results without any application-specific code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18550
Summary: Updates and clarifies UI
Test Plan: New peoples, new bots, new mailing list
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18562
Summary: New edit ui
Test Plan: create a space
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18558
Summary: This should have a border
Test Plan: Reload page
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18549
Summary:
Ref T12819. Provides a Ferret-engine-based fulltext engine to ultimately replace the InnoDB fulltext engine.
This is still pretty basic (hard-coded and buggy) but technically sort of works.
To activate this, you must explicitly configure it, so it isn't visible to users yet.
Test Plan: Searched for objects with global fulltext search, got a mixture of matching revisions and tasks back.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18548
Summary: Ref T12819. Uses an extension rather than hard-coding support into Maniphest.
Test Plan: Saw "Query" field appear in Differential, which also implements the interface and has support. Used field in both applications.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18547
Summary:
See PHI57. For example, a query for "ios, only()" finds tags tasked with iOS, exactly, and no other tags.
I called this "only()" instead of "exact()" because we use the term/function "Exact" elsewhere with a different meaning, e.g. in Differential.
Test Plan:
Basic query for a tag:
{F5168857}
Same query with "only", finds tasks tagged with only that tag:
{F5168858}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18543
Summary: Ref T12819. This was originally intended for debugging, but never actually used and not clearly useful. There are no callers and it probably does not work. Just get rid of it.
Test Plan: Grepped for callers; none exist.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18544
Summary:
Fixes T12118. See PHI54. This adds a special case for the initial "reviewers" transactions, similar to the existing special case for "projects" transactions.
Although these transactions are redudnant in the web view since you can see the information clearly on the page, they're more reasonably useful in mail.
Test Plan: {F5168838}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12118
Differential Revision: https://secure.phabricator.com/D18542
Summary: Create a diff page, new UI
Test Plan: Create a diff from page
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18529
Summary: This simplifies EditEngine pages in general by removing the dual header, and extending to allow setting of a custom PHUIHeaderView if needed (like settings).
Test Plan:
Review all settings pages, review task, project pages. This should all be fine, but is a big change maybe some layouts I'm not considering. Tested these all mobile, destkop as well.
{F5166181}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18527
Summary: Updates settings panel UI for new white box, cleans up other various UI nitpicks.
Test Plan: Click through each setting that had a local setting page. Edit Engine pages will follow up on another diff.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18526
Summary: Adds a `MenuName` method to applications that `ProfileMenuItem` uses instead of the application name if set. This improves the home/menu/new user experience at little cost. Also renamed the label from Applications to Favorites, since this menu gets altered to provide more than just applications. This also allows instances to set back to Maniphest if they so choose. Overall I think this direction resolves 95% of my concerns, with maybe a small potential downside which I don't really anticipate. We already name Dashboard panels by their object, and that hasn't really caused confusion. I think these links are similar. I click 'Tasks' and get presented a list of my tasks from Maniphest.
Test Plan: Review each of the name changes as a default new install and a modified install.
Reviewers: epriestley, amckinley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18524
Summary: Simplifies the Repository Management pages to the new fixed column layout. I've also moved "Status" into the Basics page, which feels better, and moved "Documentation" as a nav item to a button in the header. This removed "action list" and "curtain view" from the management panels and uses the new bits from Config/Phacility. Undecided if the icons should stay or go for the nav. Left them in for Diffusion. I want to update the EditEngine pages to display in this UI and not leave the portal, but I haven't dug into that this page. I'm a bit worried it will not easily be possible.
Test Plan:
Generate a svn, git, hg repository, test each of the new pages and each of the new buttons. Activate, deactivate, etc.
{F5164674}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18523
Summary: Ref T12819. Adds storage and indexing for the Ferret engine to Differential.
Test Plan: Ran `bin/search index D123 --force`, saw indexes appear in database. No UI/user impact yet.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18540
Summary:
This is a full UI pass at a cleaner "Config" application. The main idea is to simplify the UI, center it, and have a different feel than other UI, a sort of "manage" UI theme for objects with loads of settings. Also adds a new minimalistic "WHITE_CONFIG" box type which may get re-used in Diffusion settings. This is a 90% pass, I'll have a few follow up diffs. Specifically:
- Build breadcrumbs as a flexible UI to go into headers.
- One click ObjectItemView option, for hover states.
- Sidenav doesn't always select (AphrontFilter issue)
- Mobile touchups, though it's pretty reasonable.
Test Plan:
Click through every page here, edit options, see new navigation UI. Test a few various setup issue layouts including fatals.
{F5163228}
{F5163229}
{F5163230}
{F5163231}
{F5163232}
{F5163233}
{F5163234}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D18519
Summary: Ref T12819. Move these out of the core engine into the Ferret engine. In the future different applications can define different functions, like "summary:..." or whatever. This may get more formalization when I possibly do "author:" and such some time down the road.
Test Plan: Searched for "title:...". Searched for "dog:...", got a useful error.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18536
Summary:
Ref T12819. Push more of the magic `' '` stuff into the engine and simplify calls to ngram construction.
Also fixes a bug where a task with title "apple banana" and description "cherry doughnut" could match query "banana cherry" by separating separate term segments with newlines instead of spaces.
Test Plan:
- Indexed some objects.
- Searched (term, substring, quoted terms).
- Viewed index in database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18534
Summary: Ref T12819. Earlier I separated some ngram code into an "ngram engine" hoping to share it across the simple Ngrams stuff and the full Ferret stuff, but they actually use slightly different rules. Just pull more of this stuff into FerretEngine to reduce the number of moving pieces and the amount of code duplication.
Test Plan: Searched for terms, rebuilt indexes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18533
Summary: Fixes T12975. This logic didn't deal with PolicyException correctly.
Test Plan: {F5167549}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12975
Differential Revision: https://secure.phabricator.com/D18537
Summary: See PHI46. The `core:` function means "find results in either the title or body, but not other auxiliary fields like comments".
Test Plan: Searched for text present in the title (yes), body (yes), and comments (no) with the `core:...` prefix.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18514
Summary:
Ref T12819. Some of the extensions "enrich" the document (adding more fields or relationships), while others "index" it (insert it into some kind of index for later searching).
Currently, these are all muddled under a single "index" phase. However, the Ferret extension cares about fields and relationships which other extensions may add.
Split this into two phases: "enrich" adds fields and relationships so other extensions can read them later if they want. "Index" happens after the document is built and has all the fields and relationships.
The specific problem this solves is that comments may not have been added to the document when the Ferret extension runs. By moving them to the "enrich" phase, the Ferret engine will be able to see and index comments.
Test Plan: Ran `bin/search index ...`, grepped for `indexFulltextDocument`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18513
Summary: Implements a new mobile view thats more fullscreen, not boxed, so more space. Fixes issues with mobile tables when scrolling overflowed content.
Test Plan: Test home, branch, tags, code, file browse, graph, compare, history, readme, open revisions, owners.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18505
Summary: Visually selects the button if blame is on.
Test Plan: Turn blame on and off in Diffusion on a file.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18504
Summary:
Ref T12819. Distinguishes between "term" queries and "substring" queries, and tries to match them correctly most of the time. For example:
- `example` matches "example", obviously.
- `~amp` matches "example", but `amp` does not.
- `examples` matches "example" through stemming.
- `"examples"` does not match "example" (quoted text does not stem).
- `"an examp"` does not match "an example" (quoted text is still term text).
- `~"an examp"` matches "an example" (quoted, substring-operator text uses substring search).
Test Plan: Ran searches similar to the above, they seemed to do what they should.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18500
Summary:
Ref T12819. Depends on D18492. Instead of passing a raw query into the Query layer, parse it first.
This allows the query layer to figure out which parts should be substring vs term match, and would allow the SearchEngine layer to do `author:...` eventually by picking it out before sending it to the Ferret engine.
Test Plan: Ran some Ferret queries. They work like before, except that nonsense like `-+"quack"` raises an exception now.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18499
Summary:
Ref T12819. Ferret currently does substring search, but this is not the default mode users expect: when you search for the "RICO" act, you do not expect to find documents containing "apRICOt" even though "RICO" is a substring.
To support term search, index the corpus as a list of terms with puncutation removed and whitespace normalized so the engine can match against it.
Test Plan:
Ran `storage upgrade`, ran `search index`, saw sensible database results:
```
rawCorpus: This is the task description.
Hark! Whom'st'dve eaten this "food" shall surely ~perish~?? #blessed
normalCorpus: thi the task descript hark whom dve eaten food shall sure perish bless
termCorpus: This is the task description Hark Whom'st'dve eaten this food shall surely perish blessed
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18498
Summary:
Ref T12819. This addresses two issues:
- One practical issue is that right now, if you search for "dog cat", and they appear in different fields (for example, "dog" appears ONLY in the title, while "cat" appears ONLY in a comment) we won't find the document. This is somewhat rare -- usually, if "dog" appears in the title, it's also repeated in the description -- but I think clearly a bug. To attack this, start automatically creating a virtual "ALL" field with the full document text which we'll use as the primary thing we match against.
- For fields which may occur more than once -- today, only comments -- aggregate them all into one big "all of the text" row instead of writing one row per comment. This partly addresses the first point ("dog" in one comment and "cat" in a different comment won't be found) and partly makes some of the query gymnastics easier.
Test Plan:
Ran `bin/storage upgrade`, ran `bin/search index <Txxx>`, saw sensible corpus values in the database:
```
mysql> select * from maniphest_task_ffield\G
*************************** 1. row ***************************
id: 3
documentID: 1981
fieldKey: full
rawCorpus: This is the task title
This is the task description.
normalCorpus: thi the task titl
thi the task descript
*************************** 2. row ***************************
id: 4
documentID: 1981
fieldKey: titl
rawCorpus: This is the task title
normalCorpus: thi the task titl
*************************** 3. row ***************************
id: 5
documentID: 1981
fieldKey: body
rawCorpus: This is the task description.
normalCorpus: thi the task descript
3 rows in set (0.00 sec)
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18497
Summary:
See PHI47. When users copy/paste a wall of text into a project tokenizer, we can end up performing a very large number of JOINs.
These JOINs seem okay locally and on `secure`, but the install in PHI47 reports hitting issues.
Since these queries are almost certainly illegitimate (I think no one uses 5+ words to find a project), just limit the search to the 5 longest tokens.
Note that typing 6 tokens will still almost always work, since the UI does additional filtering. However, if you have 100+ projects named "a b c d e ..." and search for "a b c d e z", you may not hit it. This is so degenerate that it's hard to imagine any users encountering it.
This is a stopgap fix, I'll file something longer-term as a followup.
Test Plan: Used `/typeahead/class/PhabricatorProjectDatasource/` to run queries. Saw the same results with shorter query plans for all reasonable queries.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18506
Summary: Only for grey buttons, but can expand. Sets a selected class.
Test Plan: Review new changes in UIExamples.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18501
Summary:
Ref T2543. The type on these got changed by accident, it should be "string" (crazy nonsense, compatible) not "int" (sensible, not compatible).
(New API uses sensible strings like "accepted" only.)
Test Plan: Called `differential.query` from web UI, saw `"2"` and similar statuses.
Reviewers: chad, jmeador, lvital
Reviewed By: jmeador, lvital
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18493
Summary:
Ref T2543. When called from the UI to build the dropdown, there's no Editor, since we aren't actually in an edit flow.
This logic worked for actually performing the edits, just not for getting the option into the dropdown.
Test Plan: Used the dropdown to close an "Accepted" revision which I authored.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18490
Summary: This removes the redundant "Account" label and item, and just keeps the page better aligned.
Test Plan: Review personal settings
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18489
Summary:
Ref T12819. Two minor improvements from live data:
- Tokenize in a UTF8-aware way.
- When one document fails to index, kill the transaction explicitly (rather than leaving it hanging) so we don't cause other failures later.
Test Plan: Created some UTF8 documents locally, indexed them, got clean results.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819
Differential Revision: https://secure.phabricator.com/D18487
Summary: This panel just gets super tall at 15 now that date is on it's own line.
Test Plan: Reload panel, count to 10.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18486
Summary:
Ref T12819. I gave this stuff a sweet code name because all the terms related to "fulltext" and "search" already mean 5 different things. It, uh, ferrets out documents for you?
I'm building this to work a lot like the existing ngram index, which seems to work pretty well. If this sticks, it will auto-resolve the join issue (in T12443) by letting us do the entire thing locally in a JOIN and thus dodge a lot of mess.
This index gets built alongside other indexes, but only shows up in the UI if you have prototypes enabled. If you do, it appears under the existing fulltext field in Maniphest. No existing functionality is affected or disrupted.
NOTE: The query engine half of this is still EXTREMELY primitive, and this probably performs worse than the existing field for now. If this doesn't show obvious signs of being awful on `secure` I'll improve that in followup changes.
Test Plan:
Indexed my tasks, ran some simple queries, got the results I wanted, even for queries "ko", "k", "v0.1".
{F5147746}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12819, T12443
Differential Revision: https://secure.phabricator.com/D18484
Summary: Fixes whatever task is tracking this junk, if one exists. Don't prompt unless there's a security issue.
Test Plan:
- Generated notifications from a test account.
- Clicked "Mark All" from dropdown menu, no prompt.
- Clicked "Mark All" from notifications screen, no prompt.
- Command-Clicked "Mark All" from dropdown menu to open in new window, got normal prompt.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18483
Summary: 50% more line, no additional cost! Order Now! Operators are standing by.
Test Plan: Blame a file
Reviewers: epriestley, avivey
Reviewed By: avivey
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18481
Summary: Just deletes the view code until I have time to better plan this out, or just not ship.
Test Plan: Visit Phame post on public logged out page, view count doesnt cause transaction fatal.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18475
Summary: These come out of the database as strings (see T12678), force them to integers for the API.
Test Plan: Called `transaction.search`, got integers in JSON instead of strings.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18476
Summary: My fake data was 100%, and not all tables have full revision history. This leads to a broken table. Instead check if we have //any// revisions at all, then always show the column, with or without a link inside.
Test Plan: going on a limb this is the correct fix and test on secure... again ...
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18474
Summary: There is still some layout issues with revisions, so I've tested it better and moved it to it's own column
Test Plan: Fake in some revision data, test various sizes and shapes.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18473
Summary:
Ref T5873. This provides paths and line numbers for inline comments.
This is a touch hacky but I was able to keep it mostly under control.
Test Plan:
- Made inline comments.
- Called API, got path/line information.
{F5120157}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5873
Differential Revision: https://secure.phabricator.com/D18469
Summary: Minor cleanup, this logic can be simpler. Instead of special-casing inlines as having an effect if the have a comment, just consider any transaction with a comment to have an effect. I'm fairly certain this is always true.
Test Plan: Made inlines, tried to submit empty comments. Behavior unchanged.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18468
Summary:
Ref T5873. See PHI14. I don't want to just expose internal transaction data to Conduit by default, since it's often: unstable, unusable, sensitive, or some combination of the three.
Instead, let ModularTransactions opt in to providing additional data to Conduit, similar to other infrastructure. If a transaction doesn't, the API returns an empty skeleton for it. This is generally fine since most transactions have no real use cases, and I think we can fill them in as we go.
This also probably builds toward T5726, which would likely use the same format, and perhaps simply not publish stuff which did not opt in.
This doesn't actually cover "comment" or "inline comment", which are presumably what PHI14 is after, since neither is modular. I'll probably just put a hack in place for this until they can modularize since I suspect modularizing them here is difficult.
Test Plan: Ran `transaction.search` on a revision, saw some transactions (title and status transactions) populate with values.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5873
Differential Revision: https://secure.phabricator.com/D18467
Summary:
Ref T5873. See PHI14. This does the basics that are shared across everything (IDs, PHIDs, dates, comments).
It doesn't do types (I think I don't necessarily want to expose internal types over the API?) or transaction-specific data.
In the next change, I'm going to add ways to let ModularTransactions "opt-in" to providing more data to Conduit. I'll use this to flesh out the actual desired transaction types (comments, presumably inline comments) and likely leave the rest as skeletons for now until use cases arise so we don't create a backward compatibility issue (or a security issue!) by exposing tons of internal stuff as public-facing API.
Test Plan:
Ran queries, used paging. Retrieved an edited, deleted, and normal comment.
{F5120060}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5873
Differential Revision: https://secure.phabricator.com/D18466
Summary:
Fixes T12970. This is easier than I expected, and appears to occur in only one place.
This prevents a change from ever generating with an anchor like `#12345678`, which is ambiguous because it may be a comment anchor.
Test Plan: Viewed a revision, saw new `change-xxxyyyzzz` anchors, clicked one, got jumped to the right place.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12970
Differential Revision: https://secure.phabricator.com/D18465
Summary:
Ref T12956. UI changes:
- Administrators get a new `[X] Save as global query` option when saving a query.
- "Edit Queries..." is split into "Personal" and "Global" sections. For administrators, each section can be edited. For non-admins, only the top section can be edited, but any query can be pinned.
A couple notes:
- This doesn't support "pin for everyone by default". New users just get the first query from the bottom set. That seems reasonable for now.
- Reordering is currently a little buggy (it works if you've reordered before, but not if you're reordering for the first time), but I need to migrate before I can fix / test that properly. So that'll get cleaned up in the next change or two.
Test Plan:
- As an admin and non-admin, viewed, edited, disabled, saved-as-personal and saved-as-global various queries.
{F5098581}
{F5098582}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12956
Differential Revision: https://secure.phabricator.com/D18426
Summary:
Ref T12956. Currently, when you visit `/maniphest/` (or any other ApplicationSearch application) we execute the first query in the list by default.
In T12956, I plan to make changes so that personal queries are always first, then global/builtin queries. Without changing the "default query" rule, this will make it harder to have, for example, some custom queries in Differential but still run a global query like "Active" by default. To make this work, you'd have to save a personal copy of the "Active" query, then put it at the top.
This feels a bit cumbersome and this rule is kind of implicit and a little weird anyway. To make this work a little better as we make changes here, add an explicit pinning action, like the one we have in Project ProfileMenus.
You can now explicitly choose a query to make default.
Test Plan:
- Browsed without pinning anything, saw normal behavior.
- Pinned queries, viewed `/maniphest/`, saw a non-initial query selected by default.
- Pinned a query, deleted it, nothing exploded.
{F5098484}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12956
Differential Revision: https://secure.phabricator.com/D18422
Summary:
See PHI42. Currently, `maniphest.search` incorrectly applies this default (group by priority) to all queries via Conduit.
The correct behavior is to apply no grouping constraint.
I think this is also a reasonable general behavior, and the current code seems to date from D6960 in 2013 and didn't seem particularly carefully considered.
This is a minor compatibility break -- saved queries which are more than 4 years old might change their group behavior. I'll note this in the change logs but expect essentially no one to be affected.
Test Plan: Ran a `maniphest.search` Conduit call and observed the underlying query. Before this change, it executed `ORDER BY priority, id`. After this change, it correctly executed `ORDER BY id` only.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18459
Summary: Using icons and dropdown buttons without text looks a little wonky, this resets the CSS a bit.
Test Plan: Review button with icon and text, just icon, just test, and dropdowns.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18461
Summary:
See PHI39. This adds support for editing parents and subtasks of a task via Conduit.
It might be nice to tie this into the `PhabricatorObjectRelationship` stuff eventually, but I think we'd effectively end up in the same place anyway in terms of what the API looks like.
Test Plan: {F5116163}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18456
Summary: Fixes T12792. Expands the Notifications to "web, desktop, both, or none" for real-time notifications in settings.
Test Plan: Test with "test notifications" button, and while logged into two accounts with each of the 4 settings.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T12792
Differential Revision: https://secure.phabricator.com/D18457
Summary: I missed an anchor tag here, adds it back
Test Plan: View blame, click a previous version of the file, click Back to HEAD link.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Differential Revision: https://secure.phabricator.com/D18451
Summary: Ref T12824, adds more information to the blame view, exposes date, commit summary, lighter colors.
Test Plan:
Review many diffs with and without blame on.
{F5111758}
{F5111759}
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T12824
Differential Revision: https://secure.phabricator.com/D18452
Summary: Fixes T12969. If you disable "Home" but leave it at the top, we still load it.
Test Plan: Disabled "Home". Move Dashboard into first position, see correct home layout.
Reviewers: epriestley
Reviewed By: epriestley
Spies: Korvin
Maniphest Tasks: T12969
Differential Revision: https://secure.phabricator.com/D18455
Summary:
See PHI36. APCu originally had `apc_` methods, but at some point dropped these and only provides `apcu_` methods.
When the `apcu_` method is present, use it. It may not be present for older versions of APCu, so keep the fallback.
Test Plan:
- With modern APCu, clicked "Purge Caches" in Config > Caches.
- Before: fatal on bad `apc_clear_caches` call.
- After: Valid cache clear.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18449
Summary: This adds a very very basic view count to Phame, so bloggers can get some idea which posts are more popular than others. Anything more than this I think should be Facts or Google Analytics.
Test Plan: Write a new post, see post count. Reload page, post count goes up. Archive post, post count stays the same.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18446
Summary: Ref T12964. This feels like a cheat, but works well. Just redirect the user back to the form they came from instead of to the key page.
Test Plan: Add a key to a user profile, add a key to an Alamanac device. Grep for PhabricatorAuthSSHKeyTableView and check all locations.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12964
Differential Revision: https://secure.phabricator.com/D18445
Summary: Moves browseFile to single column, implements Owners as a list under the file (and now directory as well), improved information listed in Owners, and moves actions into the Diffusion action bar instead of the header.
Test Plan:
Test browsing directories, files, text, images, binaries, enabling blame. Mobile and desktop.
{F5111045}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18448
Summary: Adds some basic UI for open / closed state when viewing a list of branches in Mercurial. Fixes T12838
Test Plan: Close and open branches, view list.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12838
Differential Revision: https://secure.phabricator.com/D18447
Summary: Better table layouts here for branches view
Test Plan: Test git, hg repositories. See column go away.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18444
Summary: This is in the crumbs, but a little hidden. Puts branch name at the top of the browse table header.
Test Plan: Review a few branchs, change branch, see new name.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18441
Summary: Adds an icon for default branch, status for branch status
Test Plan: Review `hg` and `git` repositories, change default branch, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18443
Summary:
Ref T12966. See that task for a description and reproduction steps.
If you put Phabricator in a master/replica configuration and then restart it, we may fatal here if the master is unreachable. Instead, we should survive setup checks.
Test Plan: Put Phabricator in a master/replica configuration, explicitly disabled the master by misconfiguring the port, restarted Phabricator. Before: fatal; after: login screen in read-only mode.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12966
Differential Revision: https://secure.phabricator.com/D18442
Summary:
Ref T12965. See that task for discussion, and PHI36 for context.
This sweeps the fatal under the rug by skipping it, letting things move forward for now.
Test Plan: Followed instructions in T12965, got a read-only recovery after restart instead of a fatal.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12965
Differential Revision: https://secure.phabricator.com/D18440
Summary: Simplifies the page, adds base support for PHUITwoColumn fixed from Instances (which I'll delete css there).
Test Plan:
click on every settings page, UI seems in tact, check mobile, desktop, mobile menus.
{F5102572}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18436
Summary: Moves the method up to DiffusionController, so it can be more universally used. Also now center aligns tabs on mobile. Still todo, get search nicely toggled on mobile
Test Plan: Test mobile, desktop. Test search from home, from browse, and browsing a specific path.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18432
Summary: Moving this down the the "bar" to allow pattern search on home. Rebuilds the mobile layout a little.
Test Plan:
Test actions on mobile, desktop, tablet.
{F5100460}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18431
Summary: Roughs this in a little, kinda basic. Allows for grouping results by page. A bit better on mobile. Would like more content return from conduit though.
Test Plan:
Test `CMS`, `cms`, and `OMGLOLWTFBBQ`, desktop and mobile
{F5099081}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18429
Summary: This is only on browse pages, but I think could be global (home) also. Moves it from a button, field, to just a field.
Test Plan:
Review search on desktop, mobile.
{F5098886}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18428
Summary: Removing this cleanly in event we want to put it back later. 99% of these cases are likely workable either by command line or the typeahead. Will gauge feedback if users notice.
Test Plan: Reload page, perform file grep search.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18425
Summary: Getting to the straight browse view went away, this adds a link back. I'll look at more long term solution for getting to grep search.
Test Plan: Click on header, get take to browse view.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18421
Summary: Ref T12956. No real behavioral changes here, just slightly more modern code.
Test Plan: Reviewed named queries in Maniphest and "Edit Queries...".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12956
Differential Revision: https://secure.phabricator.com/D18420
Summary:
Ref T2543. This updates and migrates the status change transactions:
- All storage now records the modern modular transaction ("differential.revision.status"), not the obsolete non-modular transaction ("differential:status").
- All storage now records the modern constants ("accepted"), not the obsolete numeric values ("2").
Test Plan:
- Selected all the relevant rows before/after migration, data looked sane.
- Browsed around, reviewed timelines, no changes after migration.
- Changed revision states, saw appropriate new transactions in the database and timeline rendering.
- Grepped for `differential:status`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18419
Summary:
Ref T2543. Rewrites all the storage to use constants.
Note that transactions still use legacy values, I'll migrate and update them separately.
Test Plan:
- Ran migration.
- Browsed around, changed revision states, viewed dashboard, etc.
- Selected `DISTINCT()` and `GROUP_CONCAT()` of the `status` field in the database, saw sane/expected before and after values.
- Verified that old Conduit methods still return numeric constants for compatibility.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18418
Summary: Ref T2543. All writers now write modern statuses. Make all readers explicit about whether they are reading modern or legacy statuses, so I can swap the storage format.
Test Plan:
- Grepped for `getStatus()`, scanned the list. Other applications have methods with this name so it's possible I missed something.
- Browed around, changed revision statuses.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18417
Summary:
Ref T2543. These are the last `ArcanistDifferentialRevisionStatus` callsites.
This removes the very old legacy `precommitRevisionStatus` field, which has no other readers. This was obsoleted by the `CLOSED_FROM_ACCEPTED` stuff, but retained for compatibility.
Test Plan:
- Poked these with the test console, although they're a little tricky to be sure about.
- Grepped for `ArcanistDifferentialRevisionStatus`, no more hits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18416
Summary: Ref T2543. Update these for the modern stuff.
Test Plan: Created a new revision, got a revision in the right state ("Needs Review"). Accepted, planned, requested, abandoned revision; state transitions looked good.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18415
Summary: Ref T2543. Swaps these over to modern constants.
Test Plan: Viewed dashboard, no chagnes to bucketing.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18414
Summary: Ref T2543. This cleans up all the "when no one is rejecting/blocking and someone accepted, mark the revision overall as accepted" logic to use more modern status stuff instead of `ArcanistDifferentialRevisionStatus`.
Test Plan:
- Updated revisions, saw them go to "Needs Review".
- Accepted, requested changes to revisions.
- Updated one with changes requested, saw it go to "needs review" again.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18413
Summary:
Ref T2543. This cleans up a couple of remaining rough edges:
- We could do an older TYPE_ACTION "close" via the daemons.
- We could do an older TYPE_ACTION "close" via `arc close-revision`, explicitly or implicitly in `arc land`, via API (`differential.close`).
- We could do an older TYPE_ACTION "rethink" ("Plan Changes") via the API, via `arc diff --plan-changes` (`differential.createcomment`).
Move these to modern modular transactions, then get rid of all the validation and application logic for them. This nukes a bunch of `ArcanistDifferentialRevision::...` junk.
Test Plan:
- Used `bin/repository reparse --message rXYZ...` to reparse a commit, closing a corresponding revision.
- Used `differential.close` to close a revision.
- Used `differential.createcomment` to plan changes to a revision.
- Reviewed transaction log for full "closed by commit" message (linking to commit and mentioning author).
- Grepped for `::TYPE_ACTION` to look for remaining callsites, didn't find any.
- Grepped for `differential.close` and `differential.createcomment` in `arcanist/` to look for anything suspicious, seemed clean.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18412
Summary:
Ref T2543. Converts the TYPE_STATUS transaction (used to render "This revision now requires changes to proceed.", "This revision is accepted and ready to land.", etc) to ModularTransactions.
Also, continue consolidating all the status-related information (here, more colors and icons) into a single place. By the end of this, we may learn that NEEDS_REVIEW uses //every// color.
Test Plan:
Reviewed old status transactions (unchanged) and created new ones (looked the same as the old ones).
(I plan to migrate all of these a few diffs from now, around when I change the storage format.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18410
Summary: Ref T2543. Cleans up some more references to ArcanistDifferentialRevisionStatus, moving toward getting rid of it completely.
Test Plan: Planned changes, requested review, inspected the "close" one since it isn't trivial to trigger.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18408
Summary: Ref T2543. Now that the integer status constants are banished to the internals, we can expose status information from "differential.revision.search".
Test Plan:
Searched for revisions.
{F5093873}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18400
Summary: Ref T2543. I converted this condition the wrong way, missing a `!`. I'll cherry-pick this to `stable`.
Test Plan: No more "Reopen Revision" action available on open revisions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18399
Summary:
Ref T2543. Ref T10967. This isn't precisely related to "draft" status, but while I'm churning this stuff anyway, get rid of the old double writes to clean the code up a bit.
These were added in T10967 to make sure the migration was reversible/recoverable, but we haven't seen any issues with it in several months so I believe they can now be removed safely. Nothing has read this table since ~April.
Test Plan: Took various review actions on revisions (accept, reject, resign, comment, etc). If this change is correct, there should be no visible effect.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967, T2543
Differential Revision: https://secure.phabricator.com/D18398
Summary:
Ref T2543. I believe there have been no upstream callsites of this method since D1646, in February 2012.
The method works, and we can revert this if needbe, but this seems like a good time to remove support.
Test Plan: Grepped for `differential.find`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18397
Summary: Ref T2543. All callsites are now in terms of `withStatuses()`.
Test Plan:
- Called `differential.query` and `differential.find` from Conduit API.
- Grepped through all `withStatus()` callsites.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18396
Summary: Ref T2543. Several queries want only open revisions. Provide a tailored, non-legacy way to issue that query.
Test Plan: Viewed some of these callsites (e.g., "Similar open revisions affecting these files"), saw only open revisions.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18395
Summary:
Ref T2543. This updates the UI control in the web UI. Also:
- This implicitly makes this queryable with the API (`differential.revision.search`); it previously was not.
- This does NOT migrate existing saved queries. I'll do those in the next change, and hold this until it happens.
- This will break some existing `/differential/?status=XYZ` links. For example, `status=open` now needs to be `status=open()`. I couldn't find any of these in the upstream, and I suspect these are rare in the wild (users would normally link directly to saved queries, not use URI query construction).
Test Plan: {F5093611}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18393
Summary:
Ref T2543. This adds a tokenizer, similar to the Maniphest tokenizer, so the hard-coded `<select />` control in Differential ApplicationSearch can be replaced with a more flexible control that handles the addition of new statuses with more grace.
This only adds the new datasource.
Test Plan: Used `/typeahead/class/` to preview the behavior of the new datasource.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18392
Summary:
Ref T12961. Fixes T4416. Currently, for observed Mercurial repositories, we build a working copy with `pull -u` (for "update").
This should be unnecessary, and we don't do it for hosted Mercurial repositories. We also stopped doing it years ago for Git repositories. We also don't clone Mercurial repositories with a working copy.
It's possible something has slipped through the cracks here so I'll hold this until after the release cut, but I believe there are no actual technical blockers here.
Test Plan:
- Observed a public Mercurial repository on Bitbucket.
- Let it import.
- Browsed commits, branches, file content, etc., without any apparent issues.
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T12961, T4416
Differential Revision: https://secure.phabricator.com/D18390
Summary:
Ref T12961. In Mercurial, it's possible to have "subrepos" which may use a different protocol than the main repository.
By putting an SSH repository inside an HTTP repository, an attacker can theoretically get us to execute `hg` without overriding `ui.ssh`, then execute code via the SSH hostname attack.
As an immediate mitigation to this attack, specify `ui.ssh` unconditionally. Normally, this will have no effect (it will just be ignored). In the specific case of an SSH repo inside an HTTP repo, it will defuse the `ssh` protocol.
For good measure and consistency, do the same for Subversion and Git. However, we don't normally maintain working copies for either Subversion or Git so it's unlikely that similar attacks exist there.
Test Plan:
- Put an SSH subrepo with an attack URI inside an HTTP outer repo in Mercurial.
- Ran `hg up` with and without `ui.ssh` specified.
- Got dangerous badness without `ui.ssh` and safe `ssh` subprocesses with `ui.ssh`.
I'm not yet able to confirm that `hg pull -u -- <uri>` can actually trigger this, but this can't hurt and our SSH wrapper is safer than the native behavior for all Subversion, Git and Mercurial versions released prior to today.
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T12961
Differential Revision: https://secure.phabricator.com/D18389
Summary: Fixes T12832. Adds a basic table (not paginated?) to view tracking and autoclose status.
Test Plan:
Review a large repository (Krita) with setting various states of tracking and autoclose.
{F5092117}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12832
Differential Revision: https://secure.phabricator.com/D18386
Summary: See PHI31. The "Accepted Older Revision" icon is (more reasonably) bluegrey, but that rule spilled over here where it doesn't make much sense. "Requested Changes to Prior Diff" remains in effect across updates, but the coloration implies otherwise.
Test Plan:
"Requested Changes to This Diff" (unchanged):
{F5092019}
"Requested Changes to Prior Diff" (now red, previously bluegrey):
{F5092020}
Note that the icons are different so this is technically colorblind-safe, and it's normally not important to distinguish between these two reds anyway.
Reviewers: chad, lvital
Reviewed By: lvital
Subscribers: lvital
Differential Revision: https://secure.phabricator.com/D18385
Summary:
Fixes T12948. See that task for substantial discussion and context. Briefly:
- This workflow is very old, and won't work for large (>2GB) files.
- This workflow has become more dangerous than it once was, and can fail in several ways that delete data and/or make recovery much more difficult (see T12948 for more discussion).
- This was originally added in D6068, which is a bit muddled, but looks like "one install ran into a weird issue so I wrote a script for them"; this would be a Consulting/Support issue and not come upstream today. I can't identify any arguments for retaining this workflow there, at least.
Test Plan:
- Grepped for `files purge`, got nothing.
- Grepped for `purge`, looked for anything that looked like instructions or documentation, got nothing.
I don't recall recommending anyone run this script in many years, and didn't even remember that it existed or what it did when T12948 was reported, so I believe it is not in widespread use.
Reviewers: joshuaspence, chad
Reviewed By: joshuaspence
Maniphest Tasks: T12948
Differential Revision: https://secure.phabricator.com/D18384
Summary: Fixes T12958. Adds a success message when card is added, also switches to use radio buttons for clarity. Updated redirect uri for deleting methods as well.
Test Plan:
Add cards, remove cards.
{F5091084}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12958
Differential Revision: https://secure.phabricator.com/D18381
Summary: Makes dialogs a little wider, form dialogs a lot wider (space controls). Also cleans up Passphrase dialogs. Fixes T12833. I think forms probably need to move to tables for better layout flexibility like veritical alignment.
Test Plan: Passphrase create, edit, etc. Other dialogs.
Reviewers: epriestley
Subscribers: Korvin
Maniphest Tasks: T12833
Differential Revision: https://secure.phabricator.com/D18382
Summary:
Ref T2543. Currently, Differential uses a set of hard-coded query filters (like "open" and "closed") to query revisions by status (for example, "open" means any of "review, revision, changes planned, accepted [usually]").
In other applications, like Maniphest, we've replaced this with a low level list of the actual statuses, plus higher level convenience UI through tokenizer functions. This basically has all of the benefits of the hard-coded filters with none of the drawbacks, and is generally more flexible.
I'd like to do that in Differential, too, although we'll need to keep the legacy maps around for a while because they're used by `differential.find` and `differential.getrevision`. To prepare for this, pull all the legacy stuff out into a separate class. Then I'll modernize where I can, and we can get rid of this junk some day.
Test Plan: Grepped for `RevisionQuery::STATUS`. Ran queries via Differential UI.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18343
Summary:
Ref T2543. Add `isPublished()` to mean: exactly the status 'closed', which is now interally called 'published', but still shown as 'closed' to users.
We have some callsites which are about "exactly that status", vs "any 'closed' status", e.g. including "abandoned".
This also introduces `isChangePlanned()`, which felt less awkward than `isChangesPlanned()` but more consistent than `hasChangesPlanned()` or `isStatusChangesPlanned()` or similar.
Test Plan: `grep`, loaded revisions, requested review.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18341
Summary:
Ref T2543. Further consolidates status management into DifferentialRevisionStatus.
One change I'm making here is internally renaming "CLOSED" to "PUBLISHED". The UI will continue to say "Closed", at least for now, but this should make the code more clear because we care about "is closed, exactly" vs "is any closed status (closed, abandoned, sometimes accepted)". This distinction is more obvious as `isClosed()` vs `isPublished()` than, e.g., `isClosedWithExactlyTheClosedStatus()` or something. I think "Published" is generally more clear, too, and more consistent with modern language (e.g., "pre-publish review" replacing "pre-commit review" to make it more clear what we mean in Git/Mercurial).
I've removed the IN_PREPARATION status since this was just earlier groundwork for "Draft" and not actually used, and under the newer plan I'm trying to just abandon `ArcanistDifferentialRevisionStatus` entirely (or, at least, substantially).
Test Plan:
- Viewed revisions.
- Viewed revision list.
- Viewed revisions linked to a task in Maniphest.
- Viewed revision graph of dependencies in Differential.
- Grepped for `COLOR_STATUS_...` constants.
- Grepped for removed method `getRevisionStatusIcon()` (no callsites).
- Grepped for removed method `renderFullDescription()` (one callsite, replaced with just building a `TagView` inline).
- Grepped for removed method `isClosedStatus()` (no callsites after other changes).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18340
Summary:
Ref T2543. These are currently numeric values, like "0" and "3". I want to replace them with strings, like "accepted", and move definitions from Arcanist to Phabricator.
To set the stage for this, reduce the number of callsites where Phabricator invokes `ArcanistDifferentialRevisionStatus`.
This is just the easy ones. I'll hold this until the release cut.
Test Plan:
- Called `differential.find`.
- Called `differential.getrevision`.
- Called `differential.query`.
- Removed all reviewers from a revision, saw warning.
- Abandoned the no-reviewers revision, no more warning.
- Attached a revision to a task to get it to show the state icon with the status on a tooltip.
- Viewed revision bucketing on dashboard.
- Used `bin/search index` to reindex a revision.
- Hit the "Land Revision" endpoint.
I didn't explicitly test these cases:
- Doorkeeper Asana integration, since setup takes a thousand years.
- Disambiguation logic when multiple hashes match, since setup is also very involved.
- Releeph because it's Releeph.
Reviewers: chad
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T2543
Differential Revision: https://secure.phabricator.com/D18339
Summary: Just a few more.
Test Plan: Edit Picture, see new image, choose image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18370
Summary: Fixes the icon bug and builds a basic examples page for future testing.
Test Plan: Visit uiexampls and various types of info views.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18356
Summary: Fixes T12952. This never work AFAIK, so resolves this mis-information. See T4411 for follow up.
Test Plan: Click on policy for a diff, no longer see text.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12952
Differential Revision: https://secure.phabricator.com/D18349
Summary: Moves Settings to use a normal side navigation vs. a two column side navigation. It also updates Edit Engine to do the same, but I don't think there are other callsites. Added a consistent header for better clarification if you were editng your settings, global settings, or a bot's settings.
Test Plan: Test each page on a personal account, create global settings, test each page there, create a bot account, and test each page on the bot account. Anything else?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18342
Summary: Ref T12928. Like `v0.1`, terms in the form `yo's` (sequences of two or fewer characters separated by apostrophes) do not get indexed.
Test Plan: {F5078192}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12928
Differential Revision: https://secure.phabricator.com/D18324
Summary: Cursory research indicates that "login" is a noun, referring to a form, and "log in" is a verb, referring to the action of logging in. I went though every instances of 'login' I could find and tried to clarify all this language. Also, we have "Phabricator" on the registration for like 4-5 times, which is a bit verbose, so I tried to simplify that language as well.
Test Plan: Tested logging in and logging out. Pages feel simpler.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18322
Summary:
Fixes T12946. `bin/remove destroy` does not remove working copies: it's more dangerous than usual, and we can't do it in the general (clustered) case.
Print a notification message after destroying a repository.
Test Plan:
- Destroyed a repository, got a hint about the working copy.
- Destroyed a task, things worked normally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12946
Differential Revision: https://secure.phabricator.com/D18313
Summary:
Fixes T12942.
- Adds binary version and path information to {nav Config > Version Information}.
- Replaces old code all over the place with new consolidated code.
Test Plan:
{F5073531}
Also faked some cases of missing binaries, bad versions, etc.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12942
Differential Revision: https://secure.phabricator.com/D18306
Summary: Fixes T12945.
Test Plan:
Mostly faked this, got a censored error:
```
$ ./bin/repository update R38
[2017-07-31 19:40:13] EXCEPTION: (Exception) Working copy at "/Users/epriestley/dev/core/repo/local/38/" has a mismatched origin URI, "https://********@example.com/". The expected origin URI is "https://github.com/phacility/libphutil.git". Fix your configuration, or set the remote URI correctly. To avoid breaking anything, Phabricator will not automatically fix this. at [<phabricator>/src/applications/repository/engine/PhabricatorRepositoryEngine.php:186]
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12945
Differential Revision: https://secure.phabricator.com/D18304
Summary: Additonal option to use newly made images in these views.
Test Plan:
Built an example in UIExamples.
{F5071682}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18299
Summary: We've never used this, and no current plans to.
Test Plan: grep for use cases.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18298
Summary: Moves over some of the icons we build for SAAS that can be useful for projects to. Also make builtin list dynamic.
Test Plan: Edit a project image, select a cool sword.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18297
Summary: Adds dropdown carets to buttons more universally that are actually dropdowns.
Test Plan: Differential, Application Search, Diffusion. Mobile and Desktop.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18292
Summary:
In Diffusion, the "Tags" view may read commits which haven't imported or parsed yet, and thus don't have loadable objects.
Most of this logic tests for `if ($commit)`, but the author part did not. Instead, don't render author information if `$commit` is not present.
Test Plan:
- Loaded tags view with commits present.
- Faked `$commit = null;`, loaded tag view, got this instead of a fatal:
{F5068432}
Reviewers: chad, amckinley
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18290
Summary:
Reverts D18276. See PHI18 for discussion. The additional rules here (roughly, "only show the first successful operation") didn't actually work out for the other types of operations.
This is all just figuring out a stopgap, T12935 and other changes should eventually provide real pathways here.
Test Plan: Straight revert.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18281
Summary: Fixes T12929. Sets a create transaction if new.
Test Plan: test a new task over email via command line
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12929
Differential Revision: https://secure.phabricator.com/D18279
Summary:
See PHI18. Third parties can currently define other types of Drydock operations (like "Merge Check" or "Cherry-Pick") but we won't show them in the UI.
This is a simple change which improves third-party support for now. These kinds of operations generally make sense in the upstream, but the pathways to support are longer.
Test Plan:
- Verified that there are no other types of repository operation which we'd want to exclude in the upstream today by reviewing the "Repository Operation" subclasses.
- Will click some buttons in production to make sure this works.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18276
Summary:
Fixes T12893. See also PHI15. This is complicated but:
- In the documentation, we say "register your web devices with Almanac". We do this ourselves on `secure` and in the production Phacility cluster.
- We don't actually require you to do this, don't detect that you didn't, and there's no actual reason you need to.
- If you don't register your "web" devices, the only bad thing that really happens is that creating repositories skips version initialization, creating the bug in T12893. This process does not actually require the devices be registered, but the code currently just kind of fails silently if they aren't.
Instead, just move forward on these init/resync phases even if the device isn't registered. These steps are safe to run from unregistered hosts since they just wipe the whole table and don't affect specific devices.
If this sticks, I'll probably update the docs to not tell you to register `web` devices, or at least add "Optionally, ...". I don't think there's any future reason we'd need them to be registered.
Test Plan:
This is a bit tough to test without multiple hosts, but I added this piece of code to `AlmanacKeys` so we'd pretend to be a nameless "web" device when creating a repository:
```
if ($_REQUEST['__path__'] == '/diffusion/edit/form/default/') {
return null;
}
```
Then I created some Git repositories. Before the patch, they came up with `-` versions (no version information). After the patch, they came up with `0` versions (correctly initialized).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12893
Differential Revision: https://secure.phabricator.com/D18273
Summary: Fixes T12931. Adds a branch selector that's always visible if the repo has commits.
Test Plan:
Test a plain hg, svn, git repository. Test setting a bad default branch. Test a good default branch. Test on desktop, mobile layouts.
{F5058061}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12931
Differential Revision: https://secure.phabricator.com/D18267
Summary:
Ref T12928. The index doesn't work for these, so show the user that there's a problem and drop the terms.
This doesn't fix the problem, but makes the behavior more clear.
Test Plan:
{F5053703}
{F5053704}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12928
Differential Revision: https://secure.phabricator.com/D18254
Summary: Cleans up a bunch of Differential odd/special colors. Adds some basic "highlight" colors instead of pure yellow.
Test Plan: Test each color change in normal and dark modes.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18239
Summary: Gives some strength to name (needed to over-ride new images) and new create copy.
Test Plan: Create a new mock, see proper story in feed.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18246
Summary: Ref T10769. See PHI8. We have an unconditional logging write which we can skip in read-only mode.
Test Plan:
- Put Phabricator in read-only mode with `cluster.read-only`.
- Called `conduit.ping` via web UI.
- Before: write-on-read-only exception.
- After: good result.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T10769
Differential Revision: https://secure.phabricator.com/D18233
Summary: Mostly this is an exercise to clean up our CSS and Celerity processor by making sure all important color decisions are generatable. It's somewhat resonable to use if you don't review code. Posting it up here mostly so I don't lose the work.
Test Plan: Visit lots and lots of pages with dark mode on and off.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18227
Summary: This spelling can definitely feel a little overplayed at times, but I still think it's a gold standard in spellings of "capabilities".
Test Plan: Felt old and uncool.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18215
Summary: Just some cleanup. Make sure action-bar has consistent space if locate is there or not, hide tabs if repository has no content. Use clone or checkout language depending on SCM. Fixes T12915.
Test Plan:
Test git, hg, svn blank states.
{F5042707}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12915
Differential Revision: https://secure.phabricator.com/D18208
Summary: This moves the clone details on the Repository Home to a button / dialog. Functionally this is to pull content on the page way up, while giving full space to all the clone options. I think we can build this into some FancyJS if needed, but this seems to clean ui the UI dramatically with little overhead. I don't want to attempt the JS dropdown unless we're sure that's the best path (it exposes the most common URI by default, saving a click).
Test Plan: Tested hg, svn, git repositories and the raw URL page. Test close button.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18203
Summary: First pass at providing a skeleton framework for laying out basic items in a left/right view. Will likely add some mobile-responsive options.
Test Plan: UIExamples
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18200
Summary: Better validation for setting a default image in project.icon
Test Plan: Test adding `"0"` and `""` as image options in project.icon, see error.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18197
Summary: Adds a page to view all and their path in UIExamples.
Test Plan: Review page in UIExamples, hover over image for path.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18196
Summary: This moves actions into the Diffusion main header, removes the locate file box, and widens description and cloning details. Projects are not currently in this layout, but will follow up in another diff. Trying to keep these changes small and iterative.
Test Plan:
Locate some files, test actions dropdown, repository with and without description. Also tablet, mobile layouts.
{F5040026}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18193
Summary: Builds out a map for icon->image in Projects, selects the icon's image as the default project image if there is no custom image chosen by the user.
Test Plan: Select various icons, see image change. Test choose picture, pick a new image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18174
Summary: Cleans up colors, removes commit hash and links the text instead. Also unsure how valuable "lint" column is here, but left it. I'd maybe like to understand that workflow since it just seems like clutter overall. Also Fixes T12905
Test Plan:
Review Phabricator, hg, and a few other test repositories locally. Holler if anything here seems bad, but this feels easier to read and use to me.
{F5038425}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12905
Differential Revision: https://secure.phabricator.com/D18189
Summary: More pretty images.
Test Plan: Set a robot as image for security project. So pretty.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18191
Summary:
Ref T12681. We need this to update the "paid until" window on support pacts.
(Instance billing doesn't use this because everything just checks if you have unpaid invoices, nothing actually happens when you pay them.)
Test Plan: See D18187.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12681
Differential Revision: https://secure.phabricator.com/D18188
Summary: Ref T12900. We implement one rule, but tell users a different (older) rule. See T12900 for discussion and history.
Test Plan:
- Verified draft/archived posts can't be seen by users who don't have permission to edit the blog.
- Drafted, archived, and published posts and read the related text.
- Looked through the changes I dug up in T12900#228748 for other strings I might have missed.
{F5033860}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12900
Differential Revision: https://secure.phabricator.com/D18182
Summary:
Adds a responsive tab bar navigation to Diffusion. Working through the new design here in pieces, so keep in mind M1477 is the target. Notably:
- Removes "branches" and "tags" from RevisionView, now on tabs
- Keeps "browse", "history", "readme" on RevisionView
- Adds tabs for all main views, including Graph... unless how that feels, so let me know.
Test Plan: Browse all pages, desktop and mobile. Test hg, svn, git repositories.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18161
Summary: Fixes T12894. See that task for discussion.
Test Plan:
- Created repositories `abcdef`, then `abcdef-a` through `abcdef-f`.
- Before patch, awkward sort order.
- After patch, query for `abcdef` hits `abcdef` first.
- See T12894 for details and screenshots.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12894
Differential Revision: https://secure.phabricator.com/D18179
Summary: The main change here is moving (compare, search, history) into buttons in the header bar on all browse views. This allows Directory Browsing to be full width, since there is no other curtain information. File, Image, LFS, Binary all stay in TwoColumn layouts with the same buttons in the header.
Test Plan: Test viewing a directory, file, image, binary file, readme, and fake a gitlfs.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17766
Summary: Fixes T12883. The task seems correct to me and I think this is a copy/paste mistake that probably blames to me.
Test Plan: Fiddled these numbers, viewed a build in Harbormaster, saw the adjusted time.
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: PHID-OPKG-gm6ozazyms6q6i22gyam
Maniphest Tasks: T12883
Differential Revision: https://secure.phabricator.com/D18177
Summary:
Fixes T12884. In cases other than this UI, applications access URIs through the Repository they're part of. This means that applications interact with URIs which have gone through the correction/adjustment logic in `PhabricatorRepository->attachURIs()`, which fixes up "builtin" URIs to have the right values based on configuration.
In this case (and, as far as I can tell, only this case) we load the URI directly //and// act on its properties which depend on configuration and repository state.
This can mean we're using a different view of the URI than we should be.
To fix this: after loading the URI, reload it through the repository so the relevant adjustments are applied.
I think this is the most reasonable fix. We could try to make `RepositoryURIQuery` somehow enforce this, but the cost of this error is small (mild confusion about display state), the other things which do direct loads don't depend on this state (editing), and everything else loads via a repository and is likely to continue doing that forever.
Test Plan: {F5026633}
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12884
Differential Revision: https://secure.phabricator.com/D18176
Summary:
When users use the web UI to enter text like "Reviewers: x" into the "Summary" or "Test Plan", we can end up with an ambiguous commit message.
Some time ago we added a warning about this to the "Summary" field, and //attempted// to add it to the "Test Plan" field, but it actually gets called from the wrong place.
Remove the code from the wrong place (no callers, not reachable) and put it in the right place.
This fixes an issue where users could edit a test plan from the web UI to add the text "Tests: ..." and cause ambiguities on a later "arc diff --edit".
Test Plan: {F5026603}
Reviewers: chad, amckinley
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18175
Summary: Ref T12845. Converts the cluster and project config options to the new stuff; this is mostly just shifting boilerplate around.
Test Plan: Edited, deleted, and mangled these options from the web UI and CLI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18166
Summary:
Fixes T12870. Ref T12845.
Technically, this addresses the core issue in T12845 too, but I'm going to convert the rest of the `custom:...` types before closing that.
In particular, for T12870:
- Validates that keywords are unique across priorities.
- Fixes missing newline in documentation.
- Updates documentation to note that keywords are now mandatory and must be unique across priorities.
Test Plan: Edited, deleted and mangled all the Maniphest custom options (priorities, statuses, points, subtypes).
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12870, T12845
Differential Revision: https://secure.phabricator.com/D18165
Summary:
Ref T12845. This is the last of the hard-coded types.
These are mostly used for values which users don't directly edit, so it's largely OK that they aren't carefully validated. In some cases, it would be good to introduce a separate validator eventually.
Test Plan: Edited, deleted and mangled these values via the web UI and CLI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18164
Summary: Ref T12845. This move 'set' options (a set of values).
Test Plan: Set, deleted and mangled 'set' options from CLI and web UI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18160
Summary: Ref T12845. These options prompt the user to select from among concrete subclasses of some base class.
Test Plan: Set, deleted and mangled these values from the web UI and CLI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18159
Summary: Ref T12845. This updates the "list<string>" and "list<regex>" options.
Test Plan: Set, deleted, and mangled options of these types from the web UI and CLI.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18157
Summary: Ref T12845. This moves the "enum" and "string" types to the new code.
Test Plan: Set, deleted, and tried to set invalid values for various enum and string config values (header color, mail prefixes, etc) from the CLI and web.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18156
Summary:
Ref T12845. Config options are "modular", but the modularity is very old, half-implemented, and doesn't use modern patterns.
Half the types are hard-coded, while half the types are semi-modular but in a weird hacky way where you prefix the type with `custom:...`.
The actual API is also weird and requires types to return a lot of `array($stuff, $thing, $other_thing, $more_stuff)` sorts of tuples.
Instead:
- Add a new replacement layer which uses modern modularity patterns and overrides the older stuff if available, so we can migrate things one at a time.
- New layer uses a more modern API -- no `return array($thing, $other_thing, ...)`, and more modern building blocks (like AphrontHTTPParameterType).
- New layer allows custom types to be deleted, which will ultimately let us deal with T12845.
Then, convert the `'int'` type to use the new layer.
Test Plan:
- Set, edited, tried-to-change-in-an-invalid-way, and deleted an `'int'` option from the web UI.
- Same from the CLI.
- Edited `config.json` to have an invalid value, verified that the error was detected and config was repaired.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12845
Differential Revision: https://secure.phabricator.com/D18155
Summary: Updates the builtin images, leaves the old choose... icons for now. I'd like to automate this based on icon when creating a project.
Test Plan: Visit edit picture page, pick a few. Purge cache, see new default image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18162
Summary: This was accidentally caught in the crossfire in D18150. This is stable enough to formalize instead of adding with an event hook.
Test Plan: Looked at a candidate revision, saw "Land Revision" appear in UI again.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18154
Summary:
Ref T12871. This replaces a dead end UI (user totally locked out) with one where the menu is still available, if the default menu item is one which generates a policy exception (e.g., because users can't see the dashboard).
Really, we should do better than this and not select this item as the default item if the viewer can't see it, but there is currently no reliable way to test for "can the viewer see this item?" so this is a more involved change. I'm thinking we get this minor improvement into the release, then pursue a more detailed fix afterward.
Test Plan:
- Added a dashboard as the top item in the global menu.
- Changed the dashboard to be visible to only user B.
- Viewed Home as user A.
- Before patch: entire page is a policy exception dialog.
- After patch, things are better:
{F5014179}
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12871
Differential Revision: https://secure.phabricator.com/D18152
Summary:
Fixes T12851.
This should fix the error I'm seeing, which is:
* `Argument 1 passed to array_fuse() must be of the type array, boolean given`
There may be a better way to patch this up than overriding the getValue() method,
however.
Test Plan:
- Changed the default "Tags" filter to specify `true` instead of `array('self')`, then viewed that filter in the UI.
- Before patch: fatal.
- After patch: page loads. Note that `true` is not interpreted as `array('self')`, but the page isn't broken, which is a big improvement.
Reviewers: #blessed_reviewers, 20after4, chad, amckinley
Reviewed By: #blessed_reviewers, amckinley
Subscribers: Korvin
Maniphest Tasks: T12851
Differential Revision: https://secure.phabricator.com/D18132
Summary:
Fixes T12869. This is a very old, pre-Drydock chunk of code from D7486 and some followups.
It does three things:
- "Land to Hosted Git": Obsoleted by Drydock, has been commented out in HEAD for a very long time with no complaints. Disabled by D8719 in 2014.
- "Land to Hosted Mercurial": Could be obsoleted by Drydock with a fairly small amount of work, but currently has no replacement. Unclear if this sees any real use. Not actually disabled at HEAD.
- "Land to GitHub": Use GitHub OAuth credentials to land to GitHub. This is sort of theoretically useful and has no analog today. Disabled by D13022 in 2015.
This stuff was largely disabled a long time ago and we haven't seen users hitting issues with it. This could all be moved to an extension today if anyone still relies on it.
Test Plan: Grepped for removed classes, browsed Differential.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12869
Differential Revision: https://secure.phabricator.com/D18150
Summary: Ref T12859. This is an older command with a lot of hard-coded flags. Modularize cache purging in a modern way so it can be extended.
Test Plan: Ran `bin/cache purge --trace` with various valid and invalid flags.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12859
Differential Revision: https://secure.phabricator.com/D18146
Summary: Fixes T12860. Some joins were being dropped because we didn't call `parent::...`
Test Plan:
- Tagged a document.
- Searched for documents with that tag.
- Before change: got all documents.
- After change: got only tagged documents.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12860
Differential Revision: https://secure.phabricator.com/D18145
Summary:
Ref T12124. After D18134 we accept either "25" or "low" via HTTP parameters and when the field renders as a control, but if the form has a default value for the field but locks or hides it we don't actually run through that logic.
Canonicalize both when rendering the control and when using a raw saved default value.
Test Plan:
- Created a form with "Priority: Low".
- Hid the "Priority" field.
- Before patch: Tried to create a task, was rebuffed with a (now verbose and helpful, after D18135) error.
- Applied patch: things worked.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12124
Differential Revision: https://secure.phabricator.com/D18142
Summary:
Ref T12857. This is generally fairly fuzzy for now, but here's something concrete: when we build a large file with `diffusion.filecontentquery`, we compute the MIME type of all chunks, not just the initial chunk.
Instead, pass a dummy MIME type to non-initial chunks so we don't try to compute them. This mirrors logic elsewhere, in `file.uploadchunk`. This should perhaps be centralized at some point, but it's a bit tricky since the file doesn't know that it's a chunk until later.
Also, clean up the `TempFile` immediately -- this shouldn't actually affect anything, but we don't need it to live any longer than this.
Test Plan:
- Made `hashFileContent()` return `null` to skip the chunk cache.
- Added `phlog()` to the MIME type computation.
- Loaded a 12MB file in Diffusion.
- Before patch: Saw 3x MIME type computations, one for each 4MB chunk.
- After patch: Saw 1x MIME type computation, for initial chunk only.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12857
Differential Revision: https://secure.phabricator.com/D18138
Summary:
Ref T12124. This is a fairly narrow fix for existing saved EditEngine forms with a default priority value.
These saved forms have a numeric (or probably "string-numeric") default value, like "50". They lost their meaning after D18111, when "50" no longer appears in the dropdown. Instead, these forms all select the highest available priority.
At time of writing, this form was broken on this install, for example:
> https://secure.phabricator.com/transactions/editengine/maniphest.task/view/13/
Additionally, `/task/edit/form/123/?priority=...` (for templating forms) stopped working with `priority=50`. This isn't nearly as important, but a larger and more sudden compatiblity break than we need to make.
Add support for an "alias map" on `<select />` controls, so if the value comes in with something we don't recognize we'll treat it like some other value. Then alias all the numeric constants -- and other keywords -- to the right constants.
This ended up only affecting the `<select />` control in the web UI.
Test Plan:
- On `stable`, created a form with "Priority: Low".
- Before patch: form has "Priority: Unbreak Now!" on `master`.
- After patch: form has "Priority: Low" again.
- Used `?priority=25`, `?priority=wish`, `?priority=wishlist` to template forms: all forms worked.
Reviewers: amckinley, chad
Reviewed By: amckinley
Maniphest Tasks: T12124
Differential Revision: https://secure.phabricator.com/D18134
Summary:
Ref T12124. Currently, Conduit provides a fairly rough error message if you provide an invalid priority.
Instead, provide a more tailored message. Also, block `!!unknown!!` except from web edits.
Test Plan:
Before:
{F5007964}
After:
{F5007965}
Also, changed a priority to `999` in the database, edited it with the normal web UI form, it let me make the edit without being forced to adjust the priority.
Reviewers: amckinley, chad
Reviewed By: amckinley
Maniphest Tasks: T12124
Differential Revision: https://secure.phabricator.com/D18135
Summary: Fixes T12840. This adds a parallel "graph" button next to history on home and on the history list page. I'll think more about better placement of how to get to this page with the upcoming redesign that's still sitting in Pholio.
Test Plan: View History, View Graph, Try pager, go to a file, click view history, see no graph button.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12840
Differential Revision: https://secure.phabricator.com/D18131
Summary:
Fixes T8909. Ref T12733.
UI attempts to follow the mock, but is a bit rough since PHUIXButtonView without text in this menu gets weird spacing, we don't have circular buttons yet, and PHUIXActionView without an icon also gets odd spacing.
Test Plan: {F5003125}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733, T8909
Differential Revision: https://secure.phabricator.com/D18128
Summary:
Ref T12733. This paves the way for a separate "hide" operation which completely hides things.
(I didn't extend this to the server side because that would require schema changes and the new "hide" state is client-only.)
Test Plan: Collapsed and expanded inlines, viewed tooltips.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18126
Summary: Fixes T12124. Changes `ManiphestEditEngine` to populate the select using priority keywords instead of the integer value. Marks `maniphest.querystatuses` as frozen. Adds a new Conduit method for fetching potential task statuses.
Test Plan: Created tasks and changed their priorities, observed that transactions in the DB still have the same type (integers as strings). Invoked `maniphest.update` with `priority => '90'` and observed that it still works. Invoked `maniphest.edit` with `priority => 'unbreak'` and observed that it now works.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T12124
Differential Revision: https://secure.phabricator.com/D18111
Summary:
Fixes T12844. This code is misleading: the daemon insert is happening on a different connection, and is not inside the transaction on the Mail connection.
What actually happens is this:
- (Connection A) `BEGIN`
- (Connection A) `INSERT INTO mail ...`
- (Connection B) `INSERT INTO worker ...` <-- This is a different connection, and it is NOT in a transaction!
- There's a race window here: the worker row is globally visible but the mail row is still isolated inside the transaction.
- (Connection A) `COMMIT`
- Now we're clear: the mail row is globally visible.
Change this code to reflect what's actually happening.
This means that if the worker row insert fails for some reason, we'll now throw with a mail row written to the database. But this is fine: it doesn't send on its own (so it can't cause mail loops or anything) and it can be re-queued with `bin/mail resend` if necessary without too much trouble.
Test Plan: See T12844 for particulars. Made some comments on tasks, saw the daemons send mail.
Reviewers: chad, amckinley, jmeador
Reviewed By: jmeador
Maniphest Tasks: T12844
Differential Revision: https://secure.phabricator.com/D18124
Summary:
Just add the monogram to the datasource's `name` field
so that it will match when typing Wnn in the typeahead field.
Test Plan:
Tested locally on my dev phab. Try searching for a panel
by monogram in the 'Add existing panel' dialog on the
'arrange workboard' interface.
Previously: typing W123 showed no results.
After this change: typing W123 finds the panel W123
Reviewers: chad, epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18121
Summary: Moves DiffusionTagsListView to uhhh, list. Separates out table view which is still in use now, implements mobile friendly UI for tags.
Test Plan:
Review KDE's Krita repository locally with lots of tags, desktop and mobile.
{F4997708}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12824
Differential Revision: https://secure.phabricator.com/D18115
Summary: Adds a new DiffusionBranchListView which replaces the BranchTable when browsing all branches in Diffusion. Has all the same capabilities, but is easier to read, adds a Compare button, and plays nicely on mobile. It does take up more space, but I think that's generally OK here since we expect our branches to not be heaping piles of intern revert branches.
Test Plan:
Follow a few repositories with branches, like Phabricator and KDE's Krita. View layouts on mobile, tablet, desktop. Try out new compare button.
{F4996207}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: avivey, Korvin
Maniphest Tasks: T12824
Differential Revision: https://secure.phabricator.com/D18113
Summary: Adds a very basic list of all inline comments, threaded, and their status. Kept this a little simpler than the mock, mostly because sorting here feels a little strange given threads would be all over the place. Not sure sorted is needed in practice anyways. I'd probably lean towards just adding a JS checkbox to hide certain rows if needed in the future.
Test Plan:
Test various commenting structures:
- Leave Comment
- Update Diff
- Leave new comment
- Reply to comment
- Reply to comment as revision author
- Mark items as done
- Update diff again
{F4996915}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D18112
Summary: Fixes T12828. This API was tightened up D17616, but I missed this callsite.
Test Plan: I've just got a good feeling in my bones.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12828
Differential Revision: https://secure.phabricator.com/D18119
Summary: Fixes T12821. (Some events only happen once, so the default behavior doesn't let you pick this rule, and objects must opt into it by saying "yeah, I support multiple edits".)
Test Plan:
Note "only the first time" selected:
{F4999093}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12821
Differential Revision: https://secure.phabricator.com/D18117
Summary: We seem to use these a lot. Makes the code cleaner.
Test Plan: UIExamples.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18114
Summary: Builds out some images to use to identify repositories. Fixes T12825.
Test Plan:
Try setting custom, built in, and null images.
{F4998175}
{F4998192}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12825
Differential Revision: https://secure.phabricator.com/D18116
Summary:
Fixes T12803. An install is having difficulty diagnosing mail failures, and one component is that permanent task failures aren't reaching the log.
It's reasonable to send these to the log even when "phd.verbose" is off. See T12803 for a rough review of when we generate these failrues today.
Test Plan:
- Faked some exceptions.
- Got a result in the log (P2058) with `phd.verbose` turned off.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12803
Differential Revision: https://secure.phabricator.com/D18106
Summary:
Fixes T12807. Some shells may apparently mangle/strip UTF8 characters? Just dodge this whole problem by sending the pattern over stdin rather than actually figuring out the particulars.
Related tasks, like T7339 and T5554, discuss finding broader fixes for this class of issue, and this definitely isn't exactly a fully legitimate fix, but in many cases (as here) we can reasonably just avoid the problem rather than actually fixing it, at least for a long time.
Test Plan: Searched for emoji and non-emoji locally, but this worked fine (on OSX) for me before the patch too.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12807
Differential Revision: https://secure.phabricator.com/D18105
Summary:
Fixes T12811. The issue here //appears// to be that both the "alice committed rXYZabc" and "Herald added projects..." actions have the same (default) strength and end up applying in arbitrary order, and probably got shuffled around as this transitioned to Modular transactions.
Give "alice committed rXYZabc" an explicitly higher action strength.
Test Plan:
- Wrote an "Always, add project X" Herald rule for commits.
- Ran `bin/repository reparse --herald ...`.
- Saw an "alice committed rXYZabc" story instead of a "Herald added projects: X" story.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12811
Differential Revision: https://secure.phabricator.com/D18104
Summary: Does the UI work that's part of T12234 and adds migrations for both of the old-style duplicate transactions.
Test Plan:
- Started with a clean DB.
- Checked out really old code that marks tasks as dupes using comments.
- Made a bunch of tasks and closed some as dupes. Made a bunch of additional comments.
- Checked out D10427 and did a `storage upgrade`.
- Made a bunch more new tasks and dupes.
- Snapshotted DB.
- Ran migration repeatedly until all expected edges showed up in the `phabricator_maniphest.edge`table.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T12234
Differential Revision: https://secure.phabricator.com/D18037
Summary: Ran across a few straglers. Convert to the correct color.
Test Plan: grep for profile-image-button, check profile image selection page
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18096
Summary: These are now unused.
Test Plan: grep, remove uiexamples
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18090
Summary: Porting over a fix that we could miss the tail end of commits. Also use the new tag borderless option.
Test Plan: Review various commit pages in profile.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18086
Summary: Little nits and spacing changes to viewing diffusion commit history on phones.
Test Plan:
Review in Chrome, iOS Simulator.
{F4990749}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18085
Summary: Try to dis-ambiguate various button types and colors. Moves `simple` to `phui-button-simple` and moves colors to `button-color`.
Test Plan: Grep for buttons still inline, UIExamples, PHUIX, Herald, and Email Preferences.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18077
Summary: Formally support borderless tags in PHUITagView.
Test Plan: Used in Diffusion History List
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18074
Summary:
Ref T12793. I'd like to understand exactly when we broke this, but this seems to be a minimal fix that shouldn't do anything surprising.
When you move document `/a/` to `/a/b/` and that path doesn't exist yet, the Content transaction currently fails because there's "no content". The content gets added later by the "move" transaction but this is implicit.
To make this work, just ignore the "missing field" error. This is a little roundabout but unlikely to break anything in weird ways.
Test Plan:
- Moved document `/a/b/` to `/a/b/c/`.
- Before patch: error about missing content.
- After patch: move worked properly.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12793
Differential Revision: https://secure.phabricator.com/D18069
Summary: Saturate the color a little more, add yellow
Test Plan: uiexamples
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18068
Summary:
Commits in the list are grouped by the date they occurred in server time. This may not be the date they occurred in client time.
Use client time, not server time, to group commits.
Test Plan:
- Set server timezone to "Asia/Famagusta".
- Set client timezone to "America/Los_Angeles".
- Viewed Phabricator repository history.
Here's what it looks like before the change:
{F4987094}
Note that the headers of the first two groups both say "Yesterday".
This is because the first commits in each group occurred on June 1 and June 2, respectively, in Famagusta, but both occurred on June 1 in Los Angeles.
Here's what it looks like after the change:
{F4987095}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18067
Summary:
Currently, the last group of commits is not shown in the list view because the final `$list` is never added to `$view`.
For example, if the first page would contain commits from "April 7", "April 6", and "April 5", commits from "April 5" are not shown.
(If a repository has 100 commits in a single day, nothing is shown.)
On this server, here's the bottom of page 1:
{F4987087}
Here's the top of page 2:
{F4987088}
However, here's `git log` between those commits:
```
$ git log --oneline 7e46^..5f49f
5f49f9c793 Add sound to logged out Conpherence
1644b45050 Disperse task subpriorities in blocks
c6a7bcfe89 Make Pholio description behave as a remarkup field (e.g., subscribe mentioned users)
bbc5f79227 Make membership lock/unlock feed stories read more naturally
789d57522b Make editing project images redirect to "Manage" more consistently
10b3879232 Make Project slug/hashtag transactions render a little more nicely
abd791889c Update Maniphest title transaction again
5a34b299e4 Update Maniphest title language
601622013d Clarify milestone/subproject creation language
c9889e3d55 Fix an issue in Phriction where moving a document just copied it instead
fdf00f6df4 Clean up some minor UI behaviors in Differential
6c46f27d98 Add quest objectives to the minimap
d783299a19 Fix Phriction status not set property on new document
93e28da76e Add more "disabled" UI to PHUIObjectItemView
7e46d7ab6a Migrate Project color to modular transactions
```
This group of commits does not currently appear anywhere in the list.
Test Plan: Viewed a page of commits, saw 100 commits.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18066
Summary:
Ref T12733. Some minor issues:
- The `strlen(...)` test against `$this->text` fails if a caller does something like `setText(array(...))`. This is rare, but used in `DiffusionBrowseController`, from D15487.
- Add PHUIX examples for icon-only buttons.
- Remove unused `SIMPLE` constant now that no callsites remain.
Test Plan:
- Viewed a directory in Diffusion's "Browse" view in a Git repository, no longer saw a warning / error log.
- Viewed PHUIX Components UI examples.
- Grepped for `::SIMPLE`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18065
Summary:
Fixes T12789. See that task for discussion. Currently, when multiple packages own the same path but have different dominion rules we get some weird/aribtrary/inconsistent results.
Instead, implement these rules:
- If zero or more weak and one or more strong packages claim a path, the strong packages (exactly) all own it.
- If one or more weak packages and zero strong packages claim a path, the weak packages all own it.
The major change here is that instead of keeping the //first// weak package we run into, we keep all the weak packages with the longest claim that we run into.
This needs to be implemented twice because Owners has two different near-copies of this logic, only one of which has test coverage. Some day maybe this will get fixed.
Test Plan:
- Added failing unit tests, made them pass.
- Viewed all A/B strong/weak combinations in Diffusion, saw sensible ownership results.
Reviewers: chad, lvital
Reviewed By: lvital
Subscribers: lvital
Maniphest Tasks: T12789
Differential Revision: https://secure.phabricator.com/D18064
Summary:
Fixes T12790. I don't think this was actually a regression, Settings just wasn't launchable before global settings (since it had no real landing page, and the profile menu always had a link) and didn't get marked launchable once we added them.
I also double-checked other un-launchable apps; Nuance is probably close enough to make launchable now while I'm in here.
Test Plan: Typed "settings" into global typeahead, got settings.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12790
Differential Revision: https://secure.phabricator.com/D18062
Summary: Ref rPf2fcafb40dde94ddf4ee22716fea74fca0334a64#38208, I think this is a more usable layout. Gets rid of clippy, audit. Adds back Differential link as tag, Build Status as button.
Test Plan: Faked data on this for Differential, Builds, should all work though. Test on real and fake repositories.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18061
Summary:
See D18018. Ref T12787. This doesn't actually work; we started publishing these stories as a side effect of converting to ModularTransactions, then I fixed the rendering.
This mechanism has very few callsites and I suspect we may want to get rid of it (see T12787) so just keep publishing these stories for now.
Test Plan: Changed the point value of a task, saw a feed story both before and after the patch.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12787
Differential Revision: https://secure.phabricator.com/D18059
Summary: Fixes T12787. Modular Transactions don't actually support `shouldHideForFeed()`. I'll add some discussion to the task.
Test Plan: Created a subtask, saw no more "X reopened Y, a subtask of P" feed story.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12787
Differential Revision: https://secure.phabricator.com/D18058
Summary: Let's buttons just be an icon, no pressure to also have text.
Test Plan: UIExamples, Search, Home, Policy Controls... Probably 99% of them.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18056
Summary: Ref T12780. I'd like 18,000 GitHub stars now please thank you
Test Plan: this feature is awful
Reviewers: chad
Reviewed By: chad
Subscribers: cspeckmim
Maniphest Tasks: T12780
Differential Revision: https://secure.phabricator.com/D18053
Summary: Ref T12780. Makes the button do something useful, like link to the history at the right spot in the graph.
Test Plan: Click on various browse buttons, get correct url.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12780
Differential Revision: https://secure.phabricator.com/D18054
Summary:
Ref T12733. Ref M1476. This adds `PHUIXButtonView`, for client-side button rendering.
It also adds a PHUIX example which renders the server and client versions of each component side-by-side so it's easier to see if they're messed up.
Test Plan: {F4984128}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18051
Summary:
Ref M1476. I'm planning to add some PHUIX examples, but sort out the existing examples a little first. I added some categories:
- Catalogs: these are what I look at most often (emoji, icons, colors).
- Single use: elements with only one use (badges, feed stories, hovercards, setup issues).
- Technical: examples which are really just "test this thing in the browser" (avatars, gestures, notifications, remarkup).
- Other: evrything else, mostly general-purpose multi-use components.
Test Plan:
(See left nav.)
{F4984042}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18050
Summary: Ref M1476. I'm going to see if I can set up side-by-side "PHUI" vs "PHUIX" to make maintaining them a touch easier. Before doing that, nuke some really old UI examples that don't seem very useful.
Test Plan: Viewed UIExamples, saw fewer bad ones.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18049
Summary:
Ref M1476. Currently, `setColor('simple')` is meaningful. Instead, `setButtonType('simple')`.
Depends on D18047.
Test Plan: Looked at UI examples, Phame, Auth. Notifications mooted by D18047.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D18048
Summary: Ref T12733. Completely removes the objectives UI.
Test Plan:
- Grepped for `objective`, etc.
- Browsed revisions, no JS errors / broken stuff.
- (If I missed anything, it's likely to turn up in followup changes.)
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D18043
Summary: This moves Diffusion History to use an easier to parse list view for commits and their (diff, audit, build) status. I left TableView around, which is used on a repositories home, and we can maybe add a "graph view" history back as another controller. Not sure what the real use is for that kind of feature though. I don't have Harbormaster set up locally so I could use another install to give this a run. I also expect to maybe not live with this UI as final, I like the UX, but the icons for indicating status don't really feel great to me, just OK.
Test Plan:
pull various repositories, check various history displays.
{F4980356}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18039
Summary: Ref T12423. Set the grouping by priority. Note this doesn't render headers but I don't want to spend a lot of time on this.
Test Plan: Review tasks in my sandbox, see them ordered by priority.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12423
Differential Revision: https://secure.phabricator.com/D18046
Summary: Ref T12776. This extraction of file PHIDs extracted "PholioImage" object PHIDs (`PHID-PIMG-...`), not "File" PHIDs (`PHID-FILE-...`). Instead, dig into the Pholio images and actually extract the file PHIDs. This method is now similar to the `PholioImageFileTransaction` method, which works already.
Test Plan:
- Create a mock.
- Update one of the images.
- In Files, view the "Attached" tab of the updated image.
- Before patch: not attached to mock.
- After patch: properly attached to mock.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12776
Differential Revision: https://secure.phabricator.com/D18042
Summary: Fixes T12775. Currently, we do not validate this option and it's possible to configure it in an invalid way.
Test Plan: Tried to misconfigure things, was helpfully pointed toward errors.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12775
Differential Revision: https://secure.phabricator.com/D18041
Summary: Start on plan outlined in T12124. Adds a new Conduit method for querying information about task priorities.
Test Plan: Ran locally; observed expected output: {F4979109}
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D18035
Summary:
Ref T12314. Open to counterdiffs / iterating / suggestions / skipping most or all of this, mostly just throwing this out there as a maybe-reasonable first pass.
When a task has a subtype (like "Plant" or "Animal"), provide some hints on the task list, workboards, and task detail.
To make these hints more useful, allow subtypes to have icons and colors.
Also use these icons and colors in the typeahead tokens.
The current rule is that we show the subtype if it's not the default subtype. Another rule we could use is "show the subtype if there's more than one subtype defined", but my guess is that most installs will mostly have something like "normal task" as the default subtype.
Test Plan:
The interfaces this affects are: task detail view, task list view, workboard cards, subtype typeahead.
{F3539128}
{F3539144}
{F3539167}
{F3539185}
Reviewers: chad
Reviewed By: chad
Subscribers: johnny-bit, bbrdaric, benwick, fooishbar
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17451
Summary: I think this is reasonable for my current use case, but stacking icons overally is pretty clunky.
Test Plan:
UIExamples
{F4978899}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18032
Summary: I think this name is more accurate, also add proper links to author image.
Test Plan: Review commits in sandbox, see new URL on image.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18026
Summary: Fixes T12505. `PhabricatorProjectsMembershipIndexEngineExtension->materializeProject()` was incorrectly bailing early for milestone objects, which prevented milestone members from being calculated correctly. This was causing problems where (for example) an Owners package owned by a milestone wasn't being satisfied when a member of the milestone approved a revision.
Test Plan: Invoked migration, observed that a user's milestones correctly showed up when searched for. Also observed that accepting a revision on behalf of a milestone now satisfies Owners rules.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12505
Differential Revision: https://secure.phabricator.com/D18033
Summary:
Fixes T12762. Currently, there's no way to get from these boxes into generaly history in Feed, and it isn't clear that the operation is possible.
For now, add some simple links. See T12762 for future work.
Test Plan:
- Viewed user profles, saw "View All".
- Viewed project profiles, saw "View All".
{F4978858}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12762
Differential Revision: https://secure.phabricator.com/D18030
Summary: Ref T12762.
Test Plan:
- Ran queries with start date, end date, both, neither.
- Used EXPLAIN to try to make sure doing the bitshift isn't going to be a performance issue.
{F4978842}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12762
Differential Revision: https://secure.phabricator.com/D18029
Summary:
Ref T12762. This updates FeedSeachEngine to user modern construction.
I've tried to retain behavior exactly, although the "Include stories about projects I'm a member of" checkbox is now nonstandard/obsolete. We could likely fold that into "Include Projects" in a future change which does a backward compatibility break.
Test Plan:
- Queried feed without constraints.
- Queried feed by user, project, "stuff I'm a member of", prebuilt "Tags" query.
- Viewed user profile / project profile feeds.
- Used function tokens (`viewer()`, etc).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12762
Differential Revision: https://secure.phabricator.com/D18028
Summary: Ref T12762. Updates some conventions and methods. This has no (meaningful) behavioral changes.
Test Plan:
- Grepped for `setFilterPHIDs()`.
- Viewed main feed, user feed, project feed.
- Called `feed.query`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12762
Differential Revision: https://secure.phabricator.com/D18027
Summary:
Fixes T12720. Currently, old daemon records are collected based on creation date. By default, the GC collects them after 7 days.
After T12298, this can incorrectly collect hibernating daemons which are in state "wait".
In all cases, this could fail to collect daemons which are stuck in "running" for a long time for some reason. This doesn't seem to be causing any problems right now, but it makes me hesitant to do "dateCreated + not running or waiting" since that might make this become a problem, or make an existing problem with this that we just haven't bumped into worse.
Daemons always heartbeat periodically and update their rows, so `dateModified` is always fresh, so collect rows based only on modification date.
Test Plan:
- Ran daemons (`bin/phd start`).
- Waited a few minutes.
- Verified that hibernating daemons in the "wait" state had fresh timestamps.
- Verified that very old daemons still got GC'd properly.
```
mysql> select id, daemon, status, FROM_UNIXTIME(dateCreated), FROM_UNIXTIME(dateModified) from daemon_log;
+-------+--------------------------------------+--------+----------------------------+-----------------------------+
| id | daemon | status | FROM_UNIXTIME(dateCreated) | FROM_UNIXTIME(dateModified) |
+-------+--------------------------------------+--------+----------------------------+-----------------------------+
| 73377 | PhabricatorTaskmasterDaemon | exit | 2017-05-19 10:53:03 | 2017-05-19 12:38:54 |
...
| 73388 | PhabricatorRepositoryPullLocalDaemon | run | 2017-05-26 08:43:29 | 2017-05-26 08:45:30 |
| 73389 | PhabricatorTriggerDaemon | run | 2017-05-26 08:43:29 | 2017-05-26 08:46:35 |
| 73390 | PhabricatorTaskmasterDaemon | wait | 2017-05-26 08:43:29 | 2017-05-26 08:46:35 |
| 73391 | PhabricatorTaskmasterDaemon | wait | 2017-05-26 08:43:33 | 2017-05-26 08:46:33 |
| 73392 | PhabricatorTaskmasterDaemon | wait | 2017-05-26 08:43:37 | 2017-05-26 08:46:31 |
| 73393 | PhabricatorTaskmasterDaemon | wait | 2017-05-26 08:43:40 | 2017-05-26 08:46:33 |
+-------+--------------------------------------+--------+----------------------------+-----------------------------+
17 rows in set (0.00 sec)
```
Note that:
- The oldest daemon is <7 days old -- I had some other older rows but they got GC'd properly.
- The hibernating taskmasters (at the bottom, in state "wait") have recent/more-current `dateModified` dates than their `dateCreated` dates.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12720
Differential Revision: https://secure.phabricator.com/D18024
Summary:
Ref T12738. By default, we process Nuance commands in the background. The intent is to let the user continue working at full speed if Twitter or GitHub (or whatever) is being a little slow.
Some commands don't do anything heavy and can be processed in the foreground. Let commands choose to try foreground execution.
Test Plan: Threw complaints in the trash, saw them immediately go into the trash.
Reviewers: chad
Reviewed By: chad
Subscribers: avivey
Maniphest Tasks: T12738
Differential Revision: https://secure.phabricator.com/D18015
Summary: Makes this a bit more flexible and allow UI to take over `col-2` completely. Also cleaned up application search a little with tags
Test Plan: Review various pages, grep for callsites.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18021
Summary: Some of these are unused, defaults to a lighter color naturally.
Test Plan: uiexamples, grep, phriction
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18020
Summary:
Fixes T12757. Here's a simple repro for this:
- Add a package you own as a reviewer to a revision you're reviewing.
- Open two windows, select "Accept", don't submit the form.
- Submit the form in window A.
- Submit the fomr in window B.
Previously, window B would show an error, because we considered accepting on behalf of the package invalid, as the package had already accepted.
Instead, let repeat-accepts through without complaint.
Some product stuff:
- We could roadblock users with a more narrow validation error message here instead, like "Package X has already been accepted.", but I think this would be more annoying than helpful.
- If your accept has no effect (i.e., everything you're accepting for has already accepted) we currently just let it through. I think this is fine -- and a bit tricky to tailor -- but the ideal/consistent beavior is to do a "no effect" warning like "All the reviewers you're accepting for have already accepted.". This is sufficiently finnicky/rare (and probably not terribly useful/desiable in this specific case)that I'm just punting.
Test Plan: Did the flow above, got an "Accept" instead of a validation error.
Reviewers: chad, lvital
Reviewed By: chad, lvital
Subscribers: lvital
Maniphest Tasks: T12757
Differential Revision: https://secure.phabricator.com/D18019
Summary: In some cases we may want a different URI for the image on an item than the header/title of the item (like user / title). This prioritizes ImageHref over Href.
Test Plan: uiexamples
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18016
Test Plan: Unit tests pass, manually changed the default sort and filter on a workboard and observed expected transactions in the DB.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D18013
Summary: Ref T12738. Implements some modular behavior for Nuance commands.
Test Plan: {F4975322}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12738
Differential Revision: https://secure.phabricator.com/D18011
Summary:
Ref T12738. This makes clicking "Throw In Trash" technically do something, sort of.
In Nuance, the default mode of operation for actions is asynchronous -- so you don't have to wait for a response from Twitter or GitHub after you mash the "send default reply tweet" / "close this pull request with a nice response" button and can move directly to the next item instead.
In the future, some operations will attempt to apply synchronously (e.g., local actions like "ignore this item forever"). This fakes our way through that for now.
There's also no connection to the action actually doing anything yet, but I'll probably rig that up next.
Test Plan: {F4975227}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12738
Differential Revision: https://secure.phabricator.com/D18010
Summary:
Ref T12738. This doesn't actually do anything yet, but allows items to define commands that show up in the UI.
Adds a "Throw in Trash" item for complaints.
This construction will allow future changes to add an `EngineExtension` which can provide generic/default commands across item types.
Test Plan: {F4975086}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12738
Differential Revision: https://secure.phabricator.com/D18009
Summary:
Ref T12738. This is mostly just laying in groundwork and prerequisites, like the ability to query items by queue.
Eventually, this will become the main UI which staff use to process a queue of items. For now, it does nothing and renders nonsense.
This and probably the next big chunk of changes are all going to be made-up, nonfinal things that just make basic operations work until we have fundamental flows -- like "assign", "comment", "close" -- working at a basic level and can think more about UI/workflow.
Test Plan:
Visited the page, it loaded a mostly-reasonable item and then rendered nonsense:
{F4975050}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12738
Differential Revision: https://secure.phabricator.com/D18008
Summary: Ref T12738. Some of the Nuance "form" workflows currently fatal after work on the GitHub stuff. Try to make everything stop fataling, at least.
Test Plan: Using "Complaints Form" no longer fatals, and now lodges a complaint instead.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12738
Differential Revision: https://secure.phabricator.com/D18007
Summary: Minor, just shows the slugs on the manage project page, also normalized language to "details"
Test Plan: review a project with slugs, description.
Reviewers: amckinley
Reviewed By: amckinley
Subscribers: epriestley, Korvin
Differential Revision: https://secure.phabricator.com/D17985
Summary: Gives the ability to hide a big long block of text in an ObjectListItem without cluttering the UI.
Test Plan:
Added a test case to UIExamples. Click on icon, see content. Click again, content go away.
{F4974153}
{F4974311}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18006
Summary: Going to play a bit with this layout (diffusion sans audit) and see how it feels on profile. Uses a user image, moves the commit hash (easily selectible) and separates commits by date.
Test Plan:
Review profiles with and without commits.
{F4973987}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18005
Summary: This was interesting, because there were a mix of callsites using transactions and others that just set the property on the `Project` object. I made everything consistent in using transactions to change this property. I also found an implementation of `getTitle()` that I don't think is ever being invoked since `shouldHide()` is returning `true`, but I migrated it anyway.
Test Plan: Unit tests pass + enabling/disabling workboards (and importing).
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D18004
Summary: This moves the navigation to a standard sidebar, and moves all actions to the curtain. Also pulled out info view when available for cleaner UI.
Test Plan:
Create a git, svn, hg test repository and verify each page in the sidebar renders as expected.
{F4973792}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D18003
Test Plan: Unit tests pass. Went through the UI for creating new subprojects and milestones, but didn't setup some API calls to check that all the validation errors were still caught.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D17999
Summary: Fixes T12744. Unclear why `null` doesn't work here but does for the title, but `!strlen` seems to work fine in both cases.
Test Plan: Create a new task, check mail folder, see [Created]
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12744
Differential Revision: https://secure.phabricator.com/D18002
Summary: Ref T12625
Test Plan: Move a document to a new location, verify the old and new document. Edit both. Grep for MOVE_AWAY
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12625
Differential Revision: https://secure.phabricator.com/D17988
Summary: GREEN
Test Plan: View a dashboard page, see green button
Reviewers: amckinley, epriestley
Reviewed By: epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D17997
Summary: Ref T12738. Update sources to modular transactions.
Test Plan: Created and edited a source.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12738
Differential Revision: https://secure.phabricator.com/D17994
Summary:
Ref T12738. Moves existing non-modular transactions to modular transactions.
Some of these are pretty flimsy, but a lot of them don't actually work or do anything in Nuance yet anyway.
Test Plan: Gently poked Nuance, nothing fell over.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12738
Differential Revision: https://secure.phabricator.com/D17990
Summary: Grep for phui-tag-shade and verify we're no longer calling shade-color directly.
Test Plan: Search, workboard, story points, etc.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17993
Summary: Adds a new tag type, starts to try to clean up the mess that are PHUITags
Test Plan:
Review UIExamples.
{F4972323}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17991
Summary: See T12673
Test Plan: Unit tests pass. Locked and unlocked a project and saw timeline changes.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D17986
Summary: Ref T12423. Adds back revisions as a user profile page. I don't want to think about custom profiles for a while.
Test Plan: Make some diffs, visit my profile, see diffs.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12423
Differential Revision: https://secure.phabricator.com/D17987
Summary: Adds a divider and better grouping
Test Plan: Click on dropdown menu on a workboard
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17984
Summary:
Ref T12733.
- While editing a comment, show a pink star ({icon star, color=pink}) with a tooltip.
- Slight UI tweaks, including draft comments getting an indigo pencil ({icon pencil, color=indigo}).
Test Plan: {F4968470}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12733
Differential Revision: https://secure.phabricator.com/D17977
Summary: See D17955.
Test Plan: Loaded a revision, no longer saw annotations with prototypes off. Still saw annotations with prototypes on.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17983
Summary: Fixes T12735. Adds a sound if the user is logged out, skips checking a setting.
Test Plan: set participants to null and verify sound plays, no exceptions1111
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12735
Differential Revision: https://secure.phabricator.com/D17973
Summary:
Ref T7664. The current algorithm for moving task subpriorities can end up stuck in a real sticky swamp in some unusual situations.
Instead, use an algorithm which works like this:
- When we notice two tasks are too close together, look at the area around those tasks (just a few paces).
- If things look pretty empty, we can just spread the tasks out a little bit.
- But, if things are still real crowded, take another look further.
- Keep doing that until we're looking at a real nice big spot which doesn't have too many tasks in it in total, even if they're all in one place right now.
- Then, move 'em out!
Also:
- Just swallow our pride and do the gross `INSERT INTO ... "", "", "", "", "", "", ... ON DUPLICATE KEY UPDATE` to bulk update.
- Fix an issue where a single move could cause two different subpriority recalculations.
Test Plan:
- Changed `ManiphesTaskTestCase->testTaskAdjacentBlocks()` to insert 1,000 tasks with identical subpriorities, saw them spread out in 11 queries instead of >1,000.
- Dragged tons of tasks around on workboards.
- Ran unit tests.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7664
Differential Revision: https://secure.phabricator.com/D17959
Summary: Ref T12732. This is pre-existing but fix it since I caught it while banging around.
Test Plan: {F4967442}
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12732
Differential Revision: https://secure.phabricator.com/D17970
Summary:
Ref T12732. Currently, different ways of setting a profile image can leave you in different places.
Instead, always send the user back to the "Manage" page.
Test Plan: Used "Current Picture", "use picture", "Build picture" and "upload picture", always ended up in the same spot.
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12732
Differential Revision: https://secure.phabricator.com/D17967
Summary: Ref T12732. Use `renderValue()` to build `renderValueList()` so we get nice fancy text for these.
Test Plan: {F4967410}
Reviewers: chad, amckinley
Reviewed By: amckinley
Maniphest Tasks: T12732
Differential Revision: https://secure.phabricator.com/D17966
Summary: Ref T12732. See D17918. With modular transactions, `getCustomTransactionNewValue()` isn't actually called.
Test Plan: Moved document `/x/` to `/y/`, saw document gone at `/x/` instead of copied.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12732
Differential Revision: https://secure.phabricator.com/D17963
Summary:
Minor UI tweaks:
- Use the dynamic icon for each file (e.g., image, text), not a hard-coded icon.
- Render the path (less important) in grey and the filename (more important) in black.
Test Plan: {F4966176}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17957
Summary:
Add important objectives (like waygates and quest markers) to the minimap.
This also probably fixes @cspeckmim's bug with the {key @} keyboard shortcut.
Test Plan:
(This is probably easier to undestand if you `arc patch` + click around.)
{F4966037}
Reviewers: chad, amckinley
Reviewed By: chad
Subscribers: cspeckmim
Differential Revision: https://secure.phabricator.com/D17955
Summary: I deleted too many lines of code here and TYPE_MOVE was always being applied when CONTENT was set. This should fix on next document save, but should I write some migration tool anyways?
Test Plan: Create a new document, see document with correct status.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17960
Summary: Brings more UI tweaks to disabled objects, like projects/people. Also fixes a missing icon in projects.
Test Plan: Application search with people and projects that have disabled results.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12732
Differential Revision: https://secure.phabricator.com/D17962
Summary: I'm not sure you can actually remove a project's image (maybe via the API?), but I kept the code for rendering the relevant title/feed anyway.
Test Plan: Unit tests + adding/changing project pictures.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D17954
Test Plan: Unit tests all pass. Added/removed/altered some project hashtags and observed expected transactions in timeline.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D17952
Summary: This allows adding of pinboard items to a timeline. I'm hoping we can get this in for Maniphest (Pholio, Cover Image) and Macro (because, Macro), but unsure how to scalably do this. Anyways, here's the front end.
Test Plan:
Make some fake timeline items in UIExamples, test mobile, tablet, and desktop breakpoints.
{F4965798}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17950
Summary:
Fixes T1591. This was removed long ago because it was a mess to implement and caused a bunch of weird issues, and also my tolerance for dealing with weird JS issues was much, much lower.
I have now survived the fires of JX.Scrollbar and would love to address 200 small nitpicks about obscure browser behaviors on Linux, so open the floodgates again.
A secondary goal here is to create room to add a global view state menu on the right, with 300 options like "hide all inlines", "hide done inlines", "hide collapsed inlines", "hide ghosts", "show ghosts", "enable filetree", "disable filetree", etc, etc. Not sure how much of this I'll actually do. I have one more experiment I want to try first.
Test Plan: {F4963294}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T1591
Differential Revision: https://secure.phabricator.com/D17945
Summary:
Ref T12616. This puts "h" back to collapse or expand the current file.
This removes some very complicated/messy code around following links in the table of contents and getting files auto-expanded. I suspect no one will miss this, but we can restore it if ayone notices.
Test Plan: Pressed "h" to collapse/expand a file. Also used the menu items.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17940
Summary: Also changes access modifiers on `PhabricatorProjectTransactionEditor` and sets up `storage` for `applyExternalEffects`.
Test Plan: Created new projects, attempted to create without name, with too long of a name, and with a name that conflicts with other projects and observed expected errors.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Maniphest Tasks: T12673
Differential Revision: https://secure.phabricator.com/D17947
Summary: Used by `PholioImageFileTransaction::mergeTransactions()`. I forgot to test adding multiple images to a Mock at the same time after migrating `mergeTransactions` over to the modular framework.
Test Plan: Added multiple images in a single transaction and didn't get an exception about accessing a protected function.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D17946
Summary: This says "Edit Subscription" but the page only lets you update the payment method for autopay. I think this is confusing users. I tried to find the best language here, but suggest something else if you prefer.
Test Plan: Review language on sample subscription page.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12451
Differential Revision: https://secure.phabricator.com/D17944
Summary:
Fixes T8323. See that task for a description.
We were using `nonempty()`, but that rule doesn't cover synthetic deletions (file present in an earlier diff, but no longer present in the later diff).
Test Plan: Followed the steps in T8323, got a clean comment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8323
Differential Revision: https://secure.phabricator.com/D17929
Summary: Ref T12616. This makes line range selection use the new code, and removes the remainder of the old "hover a line number" / "select a line range" code.
Test Plan: Hovered line numbers; selected line ranges.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17927
Summary:
Fixes T7682. The left-hand-side "<th />" row did not generate with the correct ID.
(I couldn't reproduce the exact issue described in T7682, but hovering comments on either side now works properly for me.)
Test Plan: {F4962479}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T7682
Differential Revision: https://secure.phabricator.com/D17926
Summary:
Ref T11401. Fixes T5232. Ref T12616.
Partly, this moves more code over to the new stuff.
This also allows "r" to work if you have code selected (not just comments). If you "reply" to code, you start a new comment.
You can "R" a comment to quote it. This just starts a new comment normally if you "R" a block of code. This is sort of a power-user version of "quote" since it seems like it probably doesn't really make sense to put it in the UI ever (maybe).
With the new click-to-select, you can click + "R" to reply-with-quote.
Test Plan: Used "r" and "R" to reply to comments and code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T11401, T5232
Differential Revision: https://secure.phabricator.com/D17920
Summary: Moves this transaction over to modular transactions.
Test Plan: Move a document, re-title a document, try to move over an existing document.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17918
Summary: It's an icon. For story points.
Test Plan: Set some points, see icon.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17915
Summary: Run through all the pages in projects and make sure they all feel similar. Adds back curtain on board manage page, even though it is sad for only having a single action.
Test Plan: Test all pages on a project for consistency in UI.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17909
Summary:
Ref T12616. Fixes T12715. I suspect these are very rarely used. (I think you tried to get rid of them before but I pushed back since we couldn't really offer great alternatives at the time?)
Now that the code is in a better place:
- Click an inline's header (just the colored part) to select it with the keyboard selection cursor.
- Click again to deselect it.
- You can use "n" and "p" to jump to comments, so "click + n" is the same as the old "V" action.
- This also makes it easier to swap between keyboard and mouse workflows, since you can jump into things with the keyboard at any inline.
Also, make "Reply" render more consistently.
Test Plan:
- Did all that stuff, things seemed to work OK.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12715, T12616
Differential Revision: https://secure.phabricator.com/D17908
Summary: Cleans up the UI, moves details over to curtain, adds some fallback no data strings.
Test Plan: Review with and without subprojects, milestones.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17907
Summary: We seem to already support this, just takes it fully there. We don't need to see things like "Flag", etc, on certain subpages of projects/people/etc.
Test Plan: Review Members, Subproject pages, no longer see "Flag for Later" which only is for the Project itself. Check manage, still there.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17897
Summary:
Fixes T8130. Allows selected comments to be shown/hidden (with "q") or marked done/not-done (with "w").
(These key selections are because "qwer" are right next to each other on QWERTY keyboards, and now mean "hide, done, edit, reply".)
Also, allow "N" and "P" to do next/previous inline, including hidden inlines. This makes "q" to hide/show a little more powerful and a little easier to undo.
Test Plan: Used "q", "w", "N" and "P" to navigate and interact with comments.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8130
Differential Revision: https://secure.phabricator.com/D17906
Summary: Restricts the view of the membership privileges to just the Members page itself, and not other pages like Home/Details.
Test Plan: Test Home, Test Members, see correct layouts.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17896
Summary: This UI can use the setDrag call to reduce clutter on the reodering dialog.
Test Plan:
Reorder some columns, save.
{F4959906}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17898
Summary: Ref T12616. This makes "edit" and "reply" work again.
Test Plan:
Used "e" and "r" to edit and reply.
Also used them in bogus ways and got useful UI feedback.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17895
Summary: Ref T12616. This moves most keyboard shortcuts into DiffChangesetList. It breaks some shortcuts that I plan to restore later, noted in T12616 (toggle file, edit inline, reply to inline), since I think ripping them out now and rebuilding them in a little bit will make things much simpler.
Test Plan:
- Used j, k, n, p, J, K shortcuts to navigate a revision.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17859
Summary:
Ref T12616. Fixes T12153. Currently, when you hide inlines, they hide completely and turn into a little bubble on the previous line.
Instead, collapse them to a single line one-by-one. Narrowly, this fixes T12153.
In the future, I plan to make these changes so this feature makes more sense:
- Introduce global "hide everything" states (T8909) so you can completely hide stuff if you want, and this represents more of a halfway state between "nuke it" and "view it".
- Make the actual rendering better, so it says "epriestley: blah blah..." instead of just "..." -- and looks less dumb.
The real goal here is to introduce `DiffInline` and continue moving stuff from the tangled jungle of a million top-level behaviors to sensible smooth statefulness.
Test Plan:
- Hid and revealed inlines in unified and two-up modes.
- These look pretty junk for now:
{F4948659}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616, T12153
Differential Revision: https://secure.phabricator.com/D17861
Summary: Ref T12616. This cements the relationship between ChangesetList (parent container) and Changeset (child) and passes translations down so Changeset can use them to translate the text "Loading..."
Test Plan: Viewed loading changes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17846
Summary: Ref T12616. This ends up being a little messy ("one giant function") and maybe I'll clean it up a bit later, but continue consolidating the wild jungle of behaviors into a smaller set of responsible objects.
Test Plan: Clicked all the menu options, saw them work properly. Grepped for removed methods.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12616
Differential Revision: https://secure.phabricator.com/D17845
Summary: Also cleans up now-dead code relating to old transactions
Test Plan: Created lots of mocks, replaced their images, added/removed images, changed the sequence, verified expected DB xaction rows, Mock updates, and correct rendering of timeline.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D17892
Summary: Various little fixes, mostly moves information from the "Details" section either into the curtain or into the specific watchers or members list based on user viewership. I think this page is both cleaner and more informative.
Test Plan:
Lock, Unlock, Watch, Join, various projects with multiple users.
{F4959101}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17891
Summary: Removal of `PholioMockEditor::applyCustomInternalTransaction()` in D17868 broke creation of new mocks in Pholio. Puts the empty method back until we finish migrating Pholio to modular transactions.
Test Plan: Created some mocks, observed lack of unhandled exception.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D17889
Summary: I think this is the correct fix, sets a consistent value for transactions, old and new, for Maniphest point values.
Test Plan:
Edit title, see no point feed story, set points, see point story, set points to same value, see no story, remove points, see remove point story.
{F4958233}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17885
Summary: Fixes T12713. We don't need to show watching and member info on other views other than ApplicationSearch (for now) so add a few methods to restrict the calls.
Test Plan: Visit project search, profile, project home, project home with subprojects
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12713
Differential Revision: https://secure.phabricator.com/D17883
Summary: Slightly nicer, more consistent UI. Also removed "Column History" from dropdowns as this is available on the general board manage page.
Test Plan: Review Board and Column management pages.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17881
Summary:
Fixes T12710. See that task for discussion. This is pretty ugly/redundant but not broken.
(Feel free to reject this and pursue something else.)
Test Plan:
- For a project with active subprojects/milestones, viewed the project profile and subprojects tabs.
- After patch: they're ugly, but no longer fatal.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12710
Differential Revision: https://secure.phabricator.com/D17882
Summary: Moves "reorder columns" and "change background" up a level, redesigns "manage" page to be a little cleaner.
Test Plan: Change colors, reorder columns, manage page, disable board, re-enable board.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17879
Summary: Fixes T12707 Adds additional information to search results for if user is a member or a watcher of a project. Also removed the icon colors, which I'll find a better way to denote in future.
Test Plan: Join a project, watch a project, view results list in /projects/
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12707
Differential Revision: https://secure.phabricator.com/D17880
Summary:
Ref T12685.
- Better icon/color/label consistency.
- Make "0" a valid response.
- Fix a bug where creating a poll with Quicksand enabled led to bad times (form submitted back to the search screen).
Test Plan: {F4956412}
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12685
Differential Revision: https://secure.phabricator.com/D17878
Summary:
Ref T12685. When you edit an application's policies but don't make any changes, you currently get stuck on the same page. This isn't how other edit screens work, and I think it's a holdover from eras long ago.
Make it consistent with other applications.
Also, fix a missing `pht()`.
Test Plan:
- Edited an application configuation.
- Clicked "Save" without making changes.
- After patch, was redirected back to detail page like in other applications.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12685
Differential Revision: https://secure.phabricator.com/D17877
Summary:
Ref T12685. I provided this incorrect (`return new` rather than `throw`) implementation earlier; it can now be replaced with a proper implementation.
This caused application policy edits to spew this into the daemon log:
```
[2017-05-14 15:35:27] EXCEPTION: (Error) Call to undefined method PhutilMethodNotImplementedException::setActor() at [<phabricator>/src/applications/transactions/worker/PhabricatorApplicationTransactionPublishWorker.php:69]
```
Test Plan:
- Used `bin/worker execute --id <id>` to execute a previously-failing task.
- Saw a feed story publish.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12685
Differential Revision: https://secure.phabricator.com/D17876
Summary: This brings up "Edit Column" as an action item under the main column dropdown as well as a "Column History" for completeness. Unsure column history is actually useful, but leaving it in anyways. It might be nice to have some sort of dialog version of a history page.
Test Plan: Make a workboard, add a column, edit column name, stay on workboard.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D17874
Summary:
Fixes T12679. Reproduction steps appear to be:
- As a logged-out user, view revision list or commit list.
- Enable bucketing by action required.
- Before patch: `foreach (null as ...)` causes error spew.
- After patch: `foreach (array() as ...)` works great.
Test Plan:
- Reproduced issue by following steps above in Differential (revisions) and Diffusion (audits/commits).
- After patches, no more errors in the log.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12679
Differential Revision: https://secure.phabricator.com/D17872
Summary: Ref T12707. Adds a simple filter for the viewer if logged in.
Test Plan: Watch a project, click on watching list, see project I'm watching.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: epriestley
Maniphest Tasks: T12707
Differential Revision: https://secure.phabricator.com/D17873
Summary: Also removes more now-dead code from `PholioTransaction`.
Test Plan: opened and closed a bunch of mocks, edited a bunch of image descriptions
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D17868
Summary: Caught this in the logs, calling an old transaction, update it.
Test Plan: Answer a question, tail log, see no error.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17870
Summary: Trailing logs for errors here, picked up some unset constants in Phame.
Test Plan: New Blog, New Post, tail daemon log for errors. See feed stories.
Reviewers: epriestley, amckinley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17871
Summary: The ports over a similar "profile image" menu item to Projects. It gives us some room to use the project icon in the sidenav along with a larger photo. It also will open up some room in the sub-page headers for us to focus on that page, and not the identity of the project at hand. Expect a few more project related touch up diffs.
Test Plan:
Review new projects menu on a few projects, update the image, see new image. Great for team photos.
{F4951264}
Reviewers: epriestley, amckinley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17869
Summary: Another Franken-transaction. Adds transactions for ImageName and MockName. Adds transaction-level validation for presence of mock name; removed same from edit controller. Removes `PholioTransaction::getRemarkupBodyForFeed()`, which appears to be dead code since that method isn't defined on any other types.
Test Plan: made a bunch of changes to pholio mocks and images and observed expected results
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, chad, epriestley
Differential Revision: https://secure.phabricator.com/D17865
Summary: Updates Legalpad to use EditEngine, paving the way for //transaction comments//. Spooky.
Test Plan:
- New Document
- Require signing, Corp - see fail
- Require signing, Noone - see fail
- Require signing, Ind - get asked to sign
- Edit Document
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17862
Summary: Begins the process of migrating Pholio to Modular Transactions by starting with the mock's description and changing the base class of PholioTransaction. Expect several more of these diffs to quickly follow. Also changes the icon for description changes to `fa-pencil`; previously it was check or ban, depending on the open/closed state. Looks like an accidental switch fallthrough.
Test Plan: made new mocks, edited their descriptions, observed same UI as previously
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D17864
Summary: This function `renderHandleLink` doesn't exist. Update call.
Test Plan: I'm still lost on how to refund a transaction? Existing?
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17858
Summary: Ref T12685. Moves Fund to EditEngine commenting.
Test Plan: View an old Fund, leave a comment, add a subscriber.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12685
Differential Revision: https://secure.phabricator.com/D17857
Summary: Ref T12685, updates fund for edit engine.
Test Plan: Create a Fund, Edit a Fund, wipe out Merchants, check errors for name and missing merchants, back Fund.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12685
Differential Revision: https://secure.phabricator.com/D17855
Summary: Ref T12685, cleans up various macro issues, remove subscribers, fix feed stories, etc.
Test Plan: Create a new macro, see no subscribers, edit various macros.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12685
Differential Revision: https://secure.phabricator.com/D17848
Summary: Ref T12685. Moves to `xaction` folder and sets description changes in transaction stories.
Test Plan: Make a poll, edit the description.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12685
Differential Revision: https://secure.phabricator.com/D17849
Summary: Ref T12685. Checks merchant capabilities at the edit engine level
Test Plan: Test with and without admin level permissions. Get restricted access if I cheat. Still able to create with admin.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12685
Differential Revision: https://secure.phabricator.com/D17852
Summary: Ref T12685. Makes the description field full remarkup and fixes setting a credential secret after destruction.
Test Plan: Change description a lot, set and destroy credentials.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12685
Differential Revision: https://secure.phabricator.com/D17851
Summary: Ref T12685. Sets required on required fields, cleans up mailtags on PhamePost
Test Plan: Create a new blog, post.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12685
Differential Revision: https://secure.phabricator.com/D17850
Summary: This was mis-tested by only using one account, which could always see the image. External transaction moved file attachment to the modular transaction for file and audio instead.
Test Plan: Test adding audio and a macro on a pleb account, visit with normal account and see macro fine.
Reviewers: epriestley, amckinley
Reviewed By: amckinley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17836
Summary: Not sure when these stopped, also fixed mailtag contants.
Test Plan: Close an initiative, see story, fund initiative, see story.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17835
Summary: Fixes T12627. Updates FundInitiative and FundBacker with modular transactions.
Test Plan: Create an Initiative, back it with fake monies, close initiative, reopen, edit various fields.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12627
Differential Revision: https://secure.phabricator.com/D17782
Summary:
Fixes T12623. Adds new modular transactions to Slowvote. Also converts
the `shuffle` column to `bool` for consistency with other boolean-ish columns.
Test Plan:
Create a new vote, modified everything that could be modified from the web UI,
observed expected timeline.
Example timeline: {F4938843}
Example transaction values in DB: {F4938850}
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin, epriestley
Maniphest Tasks: T12623
Differential Revision: https://secure.phabricator.com/D17830
Summary:
We are submitting `epriestley (Evan Priestley) <noreply@meta.phacility.com>`, but should be submitting `"epriestley (Evan Priestley)" <noreply@meta.phacility.com>`.
Add the missing quotes.
Test Plan: Locally, this makes the API calls work against the Mailgun sandbox domain.
Reviewers: chad, amckinley
Reviewed By: chad, amckinley
Differential Revision: https://secure.phabricator.com/D17831
Summary: Updates the Spaces application for modular transactions, seemed easy to bang out.
Test Plan: Create a space, edit a space, archive a space. Verify default space works as intended.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17829
Summary: Update Legalpad for modular transactions
Test Plan:
- New Document (no sign)
- New Document (individual)
- New Document (corp)
- Require Signature - get prompted to sign before I can do anything.
- Edit Documents
- Sign Documents
- Comment on Documents
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17826
Summary: Updates Passphrase for modular transactions.
Test Plan: Create, edit, lock, view, lots of different types of Passphrases. Enable Conduit, Lock Passphrases, Destroy Secrets from the interface and verify from the DB it was eradicated.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17824
Summary: Still needs some cleanup, but ready for review in broad outline form.
Test Plan:
Made lots of policy changes to the Badges application and confirmed expected rows in `application_xactions`, confirmed expected changes to `phabricator.application-settings`.
See example output (not quite working for custom policy objects) here:
{F4922240}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, chad, epriestley
Maniphest Tasks: T11476
Differential Revision: https://secure.phabricator.com/D17757
Summary: Moves over to transaction commenting.
Test Plan: Leave a comment (tested with TYPE_COMMENT still present).
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17823
Summary: See D17812, etc. We can figure this out by looking at the object carefully. We don't need to go delete all the old TYPE_COMMENT (it doesn't hurt anything) but can nuke it when we see it.
Test Plan:
- Made a comment in Slowvote (supports commenting).
- Viewed an Almanac device (does not support commenting).
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17822
Summary: Just a small touch up to move this to edit engine.
Test Plan:
- Create a question
- Edit a question
- Close question
- Test NUX state
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17812
Summary: Updates PhamePost for modular transactions.
Test Plan:
- Create a post
- Edit a post
- Add a header image
- Delete header image
- Award Token
- Leave comment
- Unpublish post
- Check History page
- Move post
- Archive post
{F4936456}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17818
Summary: Updates Macro to use EditEngine. Also removes "URL" field for adding a Macro, which I think it's worth pursuing.
Test Plan:
- Create a Macro
- Forget to name it
- Try a PDF
- Use a Macro
- Edit a macro (not working)
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17821
Summary: Moves PhameBlog over to the wonderful world of modular transactions and the riches that lay beyond...
Test Plan:
- Create Blog
- Edit Blog
- Set Header
- Delete Header
- Add picture
- Archive blog
- Set incorrect domain values
- Be irresponsible with subtitle length
- Activate blog
- Change description
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17815
Summary:
Fixes T12661.
When changing the start date of an event from some time in the past to some time significantly in the future (more than 24 hours), we'd invalidate only future caches and leave users in an "away" state. Instead, just invalidate all past and future caches (this is simpler than trying to figure out a narrower window, and should not make us do too much extra work).
When uninviting users from events, their caches also didn't get cleared correctly. Instead, clear them.
Test Plan:
- Changed an event from "Apr 1 - June 1" to "May 15 - June 1", saw availablity clear properly.
- Uninvited user `@dog` from an ongoing event, saw availability clear properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12661
Differential Revision: https://secure.phabricator.com/D17809
Summary: T12656, mark these methods as frozen and use conpherence.edit instead.
Test Plan: Visit conduit, check status is displayed.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17808
Summary: Fixes T12659. Previously this would lead to an error when trying to run `arc diff` on a revision that had a milestone as a reviewer (or any non-octothorpe'd Object Name)
Test Plan: Followed repro steps in T12659 and didn't get the error described. Also clicked around and didn't notice any obvious regressions in projects or differential
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, yelirekim
Maniphest Tasks: T12659
Differential Revision: https://secure.phabricator.com/D17807
Summary:
Fixes T12642. Currently, writing "Fixes T..." in a comment gets picked up as a formal "fixes".
This is a bit confusing, and can also give you a "no effect" error if you "fixes ..." a task which is already "fixes"'d.
We could make the duplicate action a non-error, but just prevent the text from having an effect instead, which seems cleaner.
Test Plan:
- Wrote "Fixes ..." in a summary, saw a "fixes" relationship established.
- Wrote "Fixes ..." in a comment, got a "mention" instead.
- `var_dump()`'d some stuff as a sanity check, looked reasonable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12642
Differential Revision: https://secure.phabricator.com/D17805
Summary: Builds a basic room generator for Conpherence, picks a random name, adds 10 random users to it, sets view and edit policy to all users.
Test Plan:
`bin/lipsum generate conpherence`
{F4928815}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17699
Summary: Moves Conpherence to use EditEngine. This removes the "First Message" field, but I think that's ok until we have direct messaging of some sort, then maybe have built-ins cover that case.
Test Plan:
- Visit /new/ and /edit/ for creating new rooms.
- Edit a room in full conpherence
- Edit a room in durable column
- grep for METADATA calls
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11729
Differential Revision: https://secure.phabricator.com/D16677
Summary:
- Change column type from `sort128` to `sort`.
- Remove `originalName`. This column is unused. Long ago, we used it to generate a `Thread-Topic` header for mail, but just use PHIDs now (the value just needs to be stable for a given object, users normally don't see it).
Test Plan:
- Created a package with a beautifully long name. Magnificent!
- Grepped for `originalName` / `getOriginalName()`, found no Owners hits.
- Verified that there isn't any name-length validation code to remove.
{F4925637}
Reviewers: chad, amckinley
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17798
Summary: Ref T12600. Basically all the property (not path) information on a hovercard for owner packages.
Test Plan:
Create a package with LOTS OF RULES. Test it as open and archived states.
{F4923441}
{F4923444}
Reviewers: epriestley, jmeador
Reviewed By: jmeador
Subscribers: jmeador, Korvin
Maniphest Tasks: T12600
Differential Revision: https://secure.phabricator.com/D17793
Summary: When a notice is in a table view in a two column layout, reset the margins.
Test Plan: Visit OwnerDetails with no paths set.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17792
Summary: I can't believe I've been staring at this page for so long without noticing this typo
Test Plan: doitlive
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D17791
Summary:
Ref T12613. Currently, the SVNTEST and HGTEST repositories are improperly configured on `secure`. These repositories use VCS systems which do not support synchronization, so they can not be served from cluster services with multiple hosts.
However, I've incorrectly configured them the same way as all the Git repositories, which support synchronization. This causes about 50% of requests to randomly fail (when they reach the wrong host).
Detect this issue and warn the user that the configuration is not valid.
It should be exceptionally difficult for normal installs to run into this.
Test Plan:
- Mostly faked these conditions locally, verified that `secure` really has this configuration.
- I'll push this, verify that the issue is detected correctly in production, then fix the config which should resolve the intermittent issues with SVNTEST.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12613
Differential Revision: https://secure.phabricator.com/D17774
Summary:
Ref T12635. See that task for discussion.
You can currently end up with a verified primary address but no "verified" flag on your account through an unusual sequence of address mutations.
Test Plan:
- Registered without verifying, using address "A".
- Added a second email address, address "B".
- Verified B (most easily with `bin/auth verify`).
- Changed my primary email to B.
- Before patch: account not verified.
- After patch: account verified.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12635
Differential Revision: https://secure.phabricator.com/D17785
Summary: Swaps out hovercard boring view for super cool workboard card view. Will have more diffs to add additional information down the road.
Test Plan: {F4921092}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17769
Summary:
Ref T12611. Currently, the HTTP/SSH logs don't have an option to include the instance name.
Add such an option.
Leave it out of the default logs because most installs don't use this.
Test Plan: See next changes.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T12611
Differential Revision: https://secure.phabricator.com/D17776
Summary: Fixes T12614.
Test Plan:
- Ran tests, saw them pass.
- Changed a thumbnail to 800x800, saw tests detect that the default image was missing.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12614
Differential Revision: https://secure.phabricator.com/D17773
Summary: Ref T12622.
Test Plan: As a logged-out and logged-in user, loaded Conpherence threads.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12622
Differential Revision: https://secure.phabricator.com/D17768
Summary: Fixes T12622. This variable is mis-named.
Test Plan: Visit a room I have not joined.
Reviewers: epriestley, amckinley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12622
Differential Revision: https://secure.phabricator.com/D17767
Summary: Fixes T12619.
Test Plan: Faked `return array()` in ConpherneceThreadQuery, got a NUX instead of fatal.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12619
Differential Revision: https://secure.phabricator.com/D17764
Summary: Uses more standard objects and more padding for reading. Removes the ToC, which is visually broken anyways.
Test Plan: Review a README.md in a local repository.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17752
Summary: Adds the ability to set a pager onto an object box directly and pick up appropriate styles.
Test Plan: grep for renderTablePagerBox, test layouts with and without a pager.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12604
Differential Revision: https://secure.phabricator.com/D17754
Summary: This adds some basic per user / per room theming for Conpherence, which should hopefully let users identify rooms from just the sidebar color.
Test Plan: Lots of threads with different colors.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17747
Summary: Makes it more clear whose authority actions have been taken under.
Test Plan: {F4916376}
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17741
Summary: Ref T12591. These preferences are per user and we need to reload the whole UI on a change anyways. Simplifies future expansion.
Test Plan: Option click into new window, set preferences. View in Conpherence, see saved settings, change sound. Hear new sound.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12591
Differential Revision: https://secure.phabricator.com/D17740
Summary:
Ref T11476. This is a bit hacky, but makes `Application` extend `LiskDAO` so we can apply transactions to it with an `Editor` class.
Also fixes schema stuff so builds should produce a clean bill of health again.
This might only get you slightly further, yell if you run into more trouble.
Test Plan:
- Ran `bin/storage upgrade -f` and got no warnings.
- Browsed around, nothing exploded?
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T11476
Differential Revision: https://secure.phabricator.com/D17738
Summary: Part of the groundwork for T11476.
Test Plan: ran `./bin/storage upgrade` and observed expected DB tables
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11476
Differential Revision: https://secure.phabricator.com/D17736
Summary: Sets notification and sound preferences in a single array()
Test Plan: Change email preference, save, set sound preference, save. Email preference still OK.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17735
Summary: Moves participants over to ModularTransactions, simplified a lot of the code. Fixes T12550
Test Plan:
Create a new room with just myself and myself + fake accounts.
Remove a person.
Remove myself.
Edit a room, topic.
Type some messages.
???
Profit
Reviewers: chad
Reviewed By: chad
Subscribers: Korvin
Maniphest Tasks: T12550
Differential Revision: https://secure.phabricator.com/D17685
Summary:
Pathway to D17685. We no longer have "behindTransactionPHID", so we no longer need the latest transaction.
This allows some code to be removed.
Test Plan:
- Grepped for callsites to `markUpToDate()` and variables used in the calls.
- Sent messages in a couple threads, viewed them, saw unread counts go away.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17733
Summary:
Pathway to D17685. This fixes an issue idenified in D17731: if any caller ever queried for more than one participant, some results could get thrown away by re-keying the results on thread PHID: two different participants can be members of the same thread!
This also fixes an issue from D17683, where a `needParticipantCache()` callsite was overlooked.
Test Plan:
- Viewed Conpherence dropdown.
- Sent messages, saw unread count / thread order still work properly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17732
Summary:
Pathway to D17685. This column is (mostly) a denormalization of `dateModified` on the thread.
Just use a JOIN instead.
This isn't //exactly// the same: we'll bump threads to the top now for non-message changes (e.g., a topic or title change). That seems fine, but we could put a `lastMessageDate` on Thread later if we want to refine it.
Also got rid of a lot of other unused stuff. There's a big garbage TODO here, I'll fix that in the next change.
Test Plan:
- Grepped for `dateTouched`.
- Grepped for `participantCursor`.
- Grepped for `ConpherenceParticipantQuery::LIMIT`.
- Looked for callsites to `setOrder()`, found none.
- Added a message to an older thread, saw it bump up to the top.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17731
Summary:
Pathway to D17685. This column is a very complicated cache of: is participant.messageCount equal to thread.messageCount?
We can just ask this question with a JOIN instead and simplify things dramatically.
Test Plan:
- Ran migration.
- Browsed around.
- Sent a message, saw unread count go up.
- Read the message, saw unread count go down.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17730
Summary: Pathway to D17685. Nothing reads this field and it has no use or value.
Test Plan:
- Ran migration.
- Grepped for `behindTransactionPHID`.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17729
Summary: A few more mp3s to choose from for Conpherence.
Test Plan: Test each sound in a new room.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17734
Summary: Ref T7567. This adds some constants (for adding new sounds), global setting for turning on and off sound (setting) and per thread preference for sound choice. Also specc'd out Mentions, if added.
Test Plan: I tested all the preference wiring, but need to set up notifications locally to verify if this works. Feel free to test.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: amckinley, Korvin
Maniphest Tasks: T7567
Differential Revision: https://secure.phabricator.com/D17726
Summary:
Fixes T12596. A query for a token (like "having") which stems to a stopword (like "have") currently survives filtering. Stem it first so it gets caught.
Also, for InnoDB, a custom stopword table can be configured. If it is, read that instead of the default stopword list (I configured it locally, but the default list is reasonable so we never formally recommended installs configure it).
Test Plan:
Queried for words that stem to stopwords, saw them filtered:
{F4915843}
Queried for the original problem query and saw "having" caught with "have" in the stopword list:
{F4915844}
Fiddled with local InnoDB stopword table config and saw the stopword list get loaded correctly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12596
Differential Revision: https://secure.phabricator.com/D17728
Summary:
Ref T7567. In T8266 I fixed a bunch of obscure "Range" issues, but only for file downloads -- not for Celerity.
Extend all that stuff to Celerity, which is fortunately much easier.
I believe this will fix Conpherence sounds in Safari.
Test Plan:
- Wrote out an HTTP request in a text file with `Range: bytes=0-1` and similar, piped it to localhost with `cat request.txt | nc localhost 80`, saw server return appropriate range responses consistent with file behavior after T8266, which all seems to work.
- Also did that for files to try to make sure I wasn't breaking anything.
Reviewers: chad, amckinley
Reviewed By: chad
Maniphest Tasks: T7567
Differential Revision: https://secure.phabricator.com/D17724
Summary: Fixes T12587. Adds a new `PhabricatorFileDeleteTransaction` that enqueues `File` delete tasks.
Test Plan:
- hack `PhabricatorFileQuery` to ignore isDeleted state
- stop daemons
- upload a file, delete it from the UI
- check that the DB has updated isDeleted = 1
- check timeline rendering in `File` detail view
- start daemons
- confirm rows are deleted from DB
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, thoughtpolice
Maniphest Tasks: T12587
Differential Revision: https://secure.phabricator.com/D17723
Summary:
Ref T12566. Ref T12563. This fixes three bugs with Aphlict replay stuff:
First, Conphernece would try to repaint the UI even if no thread was open. Only repaint when a thread is open.
Second, although we deduplicate JX.Leader messages, we didn't deduplicate actual notification messages. If you browsed the leader window, then it re-elected itelf as a leader and replayed history, it could rebroadcast notifications and other windows could show doubles. Deduplicate notifications to prevent this.
Third, we always replayed the last 60 seconds of history. When you browsed the leader window, whichever window became the new leader (possibly the one you just browsed) could replay messages from before it had opened, leading to duplicate messages. Particularly, after receiving a message and then browsing you could see that message again. Instead, only replay history as far back as when the window first opened.
Test Plan:
- Clicked "Repaint" with a thread open, saw a repaint. Clicked "Repaint" with Conpherence open but no thread, no repaint and no 404 request to `/update/null/`.
- In browser A, opened three windows. In browser B, sent a notification. In browser A, browsed the leader window away twice in a row. Observed that the window which never became a leader doesn't duplicate notifications.
- In browser A, opened three windows. In browser B, sent a notification. In browser A, browsed the leader window away over and over again. Observed that replay requests issued with appropriate history windows.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12566, T12563
Differential Revision: https://secure.phabricator.com/D17722
Summary:
Deletion is a possibly time-intensive process, especially with large
files that are backed by high-latency, chunked storage (such as
S3). Even ~200mb objects take minutes to delete, which makes for an
unhappy experience. Fixes T10828.
Test Plan:
Delete a large file, and stare in awe of the swiftness with
which I am redirected to the main file application.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: thoughtpolice, Korvin
Maniphest Tasks: T10828
Differential Revision: https://secure.phabricator.com/D15743
Summary: Fixes T12579. Unclear why the user ran this command.
Test Plan: Ran with `--id cat`. Ran with `--id 123`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12579
Differential Revision: https://secure.phabricator.com/D17719
Summary: Ensures that newly-made `File` objects get indexed into the new ngrams index. Fixes T8788.
Test Plan:
- uploaded a file with daemons stopped; confirmed no new rows in ngrams table
- started daemons; confirmed indexing of previously-uploaded files happened
- uploaded a new file with daemons running; confirmed it got added to the index
Not sure how to test the changes to `PhabricatorFileUploadSource->writeChunkedFile()` and `PhabricatorChunkedFileStorageEngine->allocateChunks()`. I spent a few minutes trying to find their callers, but the first looks like it requires a Diffusion repo and the 2nd is only accessible via Conduit. I can test that stuff if necessary, but it's such a small change that I'm not worried about it.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T8788
Differential Revision: https://secure.phabricator.com/D17718
Summary: Follows the outline in D15656 for implementing ngram search for names of File objects. Also created FileFullTextEngine, because without implementing `PhabricatorFulltextInterface`, `./bin/search` complains that `File` is not an indexable type.
Test Plan:
- ran `./bin/storage upgrade` to apply the schema change
- confirmed the presence of a new `file_filename_ngrams` table
- added a couple file objects
- ran `bin/search index --type file --force`
- confirmed the presence of rows in `file_filename_ngrams`
- did a few keyword searches and saw expected results
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T8788
Differential Revision: https://secure.phabricator.com/D17702
Summary: Check the strlen of topic before adding a tag to the header in Conpherence.
Test Plan: Remove a topic, no longer see indigo bubble.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17715
Summary: Ref T12566. When we reconnect, refresh the current thread even if we replayed notifications.
Test Plan:
- Clicked the "Repaint" button, saw the thread refresh.
- Clicked the "Reconnect" button, saw the thread reresh.
- Launched `aphlict debug`, killed it, restarted it, saw the thread refresh after reconnect.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12566
Differential Revision: https://secure.phabricator.com/D17713
Summary:
Fixes T12564. We already had some code which seems to deal with this properly, it just wasn't getting used.
Assign each application-level notification a unique ID, then ignore messages with duplicate IDs.
Test Plan:
- In browser A, loaded `/T123`.
- In browser B, loaded `/T123`.
- Made a comment as B.
- Saw notification as A.
- Mashed "Replay" a bunch.
- Before patch: piles of duplicate notifications.
- After patch: no duplicates.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12564
Differential Revision: https://secure.phabricator.com/D17710
Summary:
Fixes T12563. If we've ever seen an "open", mark all future connections as reconnects. When we reconnect, replay recent history.
(Until duplicate messages (T12564) are handled better this may cause some notification duplication.)
Also emit a reconnect event (for T12566) but don't use it yet.
Test Plan: {F4912044}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12563
Differential Revision: https://secure.phabricator.com/D17708
Summary:
Ref T12563. Before broadcasting messages from the server, store them in a history buffer.
A future change will let clients retrieve them.
Test Plan:
- Used the web frontend to look at the buffer, reloaded over time, sent messages. Saw buffer size go up as I sent messages and fall after 60 seconds.
- Set size to 4 messages, sent a bunch of messages, saw the buffer size max out at 4 messages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12563
Differential Revision: https://secure.phabricator.com/D17707
Summary: Ref T12568. Ref T12567. Allows you to force a reconnect, and shows the reconnect delay on connection close/failure.
Test Plan: {F4911879}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12568, T12567
Differential Revision: https://secure.phabricator.com/D17705
Summary: Ref T12568. This begins building toward a more useful realtime debugging console for Leader/Aphlict/general realtime stuff.
Test Plan: {F4911521}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12568
Differential Revision: https://secure.phabricator.com/D17701
Summary: Ref T8788. See D17702. This allows `bin/search index` to index stuff which only implements `Ngrams`, not `Fulltext`.
Test Plan: Kinda poked around `bin/search index` a bit, yell if you hit more issues deeper down the stack?
Reviewers: amckinley
Reviewed By: amckinley
Maniphest Tasks: T8788
Differential Revision: https://secure.phabricator.com/D17704
Summary: Fixes T12556 Uses more common components in ConpherenceThreadList by moving to PHUIListItemView. Reduces clutter by moving privacy into the header. Gets ride of "See More" double interchanges.
Test Plan:
I need to test this more, doesn't seem to auto-select top room any more, also might build a lipsum generator.
- Create lots of rooms with various policies
- Test clicking on policy object
- Click on different rooms
- Post in rooms
- Load up second account, see room numbers
- Clear room message count by clicking on room
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12556
Differential Revision: https://secure.phabricator.com/D17698
Test Plan: Created a phurl, added some comments, confirmed that "Change Subscribers" and "Change Project Tags" are now available in the comment form.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: chad, Korvin
Maniphest Tasks: T11661
Differential Revision: https://secure.phabricator.com/D17686
Summary: Updates the language to use "Remove Participant" instead of "Banish User"
Test Plan: Read through the various cases, test them by removing myself or others
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17697
Summary:
I think these got munged when I removed CAN_JOIN.
- If you can view the room, you can join it.
- ~~If you can view the room, you can add others to it.~~ This rule adjustment was removed, see discussion on the revision.
- If you are a participant in the room, you can remove yourself.
- If you can edit a room, you can remove anyone.
Test Plan:
Normal feature set:
- Create a new room that only I can edit, viewable by all users.
- Leave room (bye k thx)
- Create another room, myself only
- Join room from second account
- See ability to only remove myself
- Remove myself
- Rejoin
- Add third account
- Log into first account
- Boot off randos
- Test joining by green button, message, and by + sign.
Policy consistency:
- As a user who can not edit the room, tried to add other members. Received policy exception. The `+` button is currently visible and enabled for all users (even users who have not joined the room) but this is pre-existing.
Reviewers: chad
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17696
Summary:
Ref T12451. This is a GREAT comment (A++) but we only need one copy of it.
This uses a pattern similar to Projects, which is a little weird but works well enough.
Test Plan:
- Viewed all four tabs of an account.
- Viewed a page with a bad account ID which 404'd properly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12451
Differential Revision: https://secure.phabricator.com/D17694
Summary: Ref T12451. This code is the same as the other code.
Test Plan: Went through the default-account case with this code, worked the same as the other code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12451
Differential Revision: https://secure.phabricator.com/D17693
Summary:
Ref T12451. Ref T12484. This should deal with all the `+` / `-` / `=` cases correctly, I think.
Also makes sure that members are real users, not commits or tokens or whatever. And expands the creation test case to make some other basic sanity checks.
Test Plan:
- Went through implicit first-time creation flow.
- Went through explicit second-time creation flow.
- Unit test now passes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12484, T12451
Differential Revision: https://secure.phabricator.com/D17692
Summary:
Ref T12451. Ref T12484. I think D17657 fixed this, but caused the bug in D17690. The fix for that causes this bug again.
Put a unit test on it. This test currently fails; I'll correct the bug in the next change.
Test Plan: Ran `arc unit`, saw a failure.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12484, T12451
Differential Revision: https://secure.phabricator.com/D17691
Summary:
Ref T12451. When you explicitly created a second or third account or whatever, you wouldn't be added as a member.
(The editor sees that you're "already a member", so it doesn't add you.)
Test Plan:
- Go to `/phortune/`.
- Click "Switch Accounts".
- Click "Create Account".
- Create an account.
- Before patch: unable to view it since you don't get added as a member.
- After patch: account created with you as member.
- Also created an accont with multiple members.
- Tried to create an account with no members.
- Tried to create an account with just someone else as a member.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12451
Differential Revision: https://secure.phabricator.com/D17690
Summary: Ref T12451. `$this->getAccount()` may not return an account.
Test Plan:
- Visit `/phortune/X/`, where `X` is the ID of an account you don't have permission to view.
- Before patch: fatal.
- After patch: normal policy exception page.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12451
Differential Revision: https://secure.phabricator.com/D17689
Summary:
Via HackerOne (<https://hackerone.com/reports/220909>). When we close commits in response to "Fixes Txxx", we currently act as the omnipotent user. This allows users to close tasks they can't see by pushing commits with "Fixes Txxx" in the message.
However, we can't actually tell who authored or committed a change: we're just using the "Author" and "Committer" values from Git in most cases, and anyone can forge those. So we can't really get this right, in a security sense.
(We can tell who //pushed// a change if we host it, but that's often not the right user. If GPG signing was more prevalent, we could use that. In the future, we could use side channels like having `arc land` tell Phabrcator who was pushing changes.)
Since I think the impact of this is fairly minor and this isn't //really// a security issue (more of a confusion/abuse/product issue) I think the behavior is okay more-or-less as-is, but we can do better when we do identify an author: drop permissions, and use their privileges to load the tasks which the commit "fixes".
This effectively implements this rule:
> If we identify the author of a commit as user X, that commit can only affect tasks which user X can see and edit.
Note that:
- Commits which we can't identify the author for can still affect any task.
- Any user can forge any other user's identity (or an invalid identity) and affect any task.
So this is just a guard rail to prevent mistakes by good-faith users who type the wrong task IDs, not a real security measure.
Also note that to perform this "attack" you must already have commit access to a repository (or permission to create a repository).
Test Plan:
- Used `bin/repository reparse --message <commit> --force-autoclose` to run the relevant code.
- Made the code `throw` before it actually applied the edit.
- Verified that the edit was rejected if the author was recognized and can not see or could not edit the task.
- Verified that the edit is accepted if the author can see+edit the task.
- Verified that the edit is accepted if we can't figure out who the author is.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17688
Summary:
Fixes T12554. The SSH key cache contains usernames, but is not currently dirtied on username changes.
An alternative solution would be to use user PHIDs instead of usernames in the file, which would make this unnecessary, but that would make debugging a bit harder. For now, I think this small added complexity is worth the easier debugging, but we could look at this again if cache management gets harder in the future.
Test Plan:
- Added a key as `ducksey`, ran `bin/ssh-auth`, saw key immediately.
- Renamed `ducksey` to `ducker`, ran `bin/ssh-auth`, saw username change immediately.
- Added another key as `ducker`, ran `bin/ssh-auth`, saw key immediately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12554
Differential Revision: https://secure.phabricator.com/D17687
Summary: Also fixes insufficiently-escaped regex examples
Test Plan: Made several changes to http://local.phacility.com/config/edit/syntax.filemap/ and observed validation failures on malformed regexes, and success on well-formed regexes.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12532
Differential Revision: https://secure.phabricator.com/D17684
Test Plan:
Created new paste with title '.arcconfig' without choosing a language; observed that the paste gets highlighted as JSON.
JSON mode:
{F4901762}
Javascript mode:
{F4901763}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11667
Differential Revision: https://secure.phabricator.com/D17682
Summary: We no longer display this any more in the UI, so go ahead and remove the callsites and db column.
Test Plan: New Room, with and without participants.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17683
Summary: removes old phabricator.com/countdown/{id} route and code that uses that URL scheme
Test Plan: loaded phabricator.com/countdown, verified that generated links point to phabricator.com/CXXX
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12524
Differential Revision: https://secure.phabricator.com/D17681
Summary: Swaps this transaction over.
Test Plan: Load up a few rooms with date markers, still render as expected.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12550
Differential Revision: https://secure.phabricator.com/D17680
Summary: Will see how this goes in practice. Uses violet where color is used for non responsive peeps.
Test Plan: Create a user without email verification, test hover card, profile, mentions and lists.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17678
Summary: This moves the count on the Conpherence Menu Item into a phui-list-item-count, and removes the CSS call to the entire Conphrence stack when durable column is open.
Test Plan: Test with and without the chat column, and a menu with a count
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17677
Summary: Fixes T12178, Fixes T11704 Not sure this feature gets any use and I can't find a similar option in other software, so removing it I think simiplifies a number of things. Removes CAN_JOIN and joinable is basically now CAN_VIEW and !$participating. Also removed some old transaction strings for other policies. Don't seem used.
Test Plan: Create a new room, edit room policies, see changes. Log into second account, search for rooms, everything now is visible.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12178, T11704
Differential Revision: https://secure.phabricator.com/D17675
Summary: Does a few things. Turns off feed stories (again), removes "action" transactions from notificiations, and only updates message count on actual messages. This feels a bit cleaner and less spammy... I guess... I think @epriestley will really like it and do me a favor or something.
Test Plan: Pull up two windows. test a message, see message count on second screen. Edit a topic or title, get no notification. At all. Ever.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin, epriestley
Differential Revision: https://secure.phabricator.com/D17674
Summary:
Ref T12137. If a database is missing the InnoDB or MyISAM table engines, the big combined query to get both will fail.
Instead, try InnoDB first and then MyISAM.
(I have both engines locally so this worked until I deployed it.)
Test Plan: Faked an InnoDB error like `secure`, got a MyISAM result.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12137
Differential Revision: https://secure.phabricator.com/D17673
Summary:
Depends on D17670. Fixes T12137. Fixes T12003. Ref T2632.
This shows users a readout of which terms were actually searched for.
This also drops those terms from the query we submit to the backend, dodging the weird behaviors / search engine bugs in T12137.
This might need some design tweaking.
Test Plan: {F4899825}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12137, T12003, T2632
Differential Revision: https://secure.phabricator.com/D17672
Summary:
Depends on D17669. Ref T12137. Ref T12003. Ref T2632. Ref T7860.
Converts Phabricator to the new parse + compile workflow with intermediate tokens.
Also fixes a bug where searches for `cat"` or similar (unmatched quotes) wouldn't produce a nice exception.
Test Plan:
- Fulltext searched.
- Fulltext searched in Conpherence.
- Fulltext searched with bad syntax.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12137, T12003, T7860, T2632
Differential Revision: https://secure.phabricator.com/D17670
Summary:
Fixes T8285. Fulltext search relies on an underlying engine which can not realistically use cursor paging. This is unusual and creates some oddness.
Tweak a few numbers -- and how offsets are handled -- to separate the filtered offset and unfiltered offset.
Test Plan:
- Set page size to 2.
- Ran a query.
- Paged forward and backward through results sensibly, seeing the full result set.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T8285
Differential Revision: https://secure.phabricator.com/D17667
Summary: Begin converting Conpherence to ModularTransactions, this converts title, topic, and picture to use modular transactions. Participants seems hairy so I'll do that in another diff
Test Plan: Create a room with a topic, change room name, topic. Add people, remove people. Set a room image. Unset topic.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17668
Summary: Fixes T11730. Removes an old transaction that hasn't been used in a year.
Test Plan: Run sql, check various rooms.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T11730
Differential Revision: https://secure.phabricator.com/D17666
Summary: looked for places where Countdown monograms/uris were being constructed by hand, and updated with modern versions
Test Plan: clicked around the Countdown UI, looking for broken links
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: chad, Korvin
Maniphest Tasks: T12524
Differential Revision: https://secure.phabricator.com/D17665
Summary: In Conpherence ProfileMenuItem we show an unread count if you're a participant, but all message count if you're not. Just remove that.
Test Plan: Log out of room in Conpherence, leave messages on second account, check menu item on both accounts.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17664
Summary: Builds a Conpherence Profile Menu Item, complete with counts for the unreads. This allows pinning to home as well as swapping out thread list in Conpherence for pinning eventually.
Test Plan: Add a menu item, chat in room, log into other account, see room count. Room count disappears after viewing.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17662
Summary: Removes this feature, makes creating a room simpler and less confusing.
Test Plan: Create a room on Conpherence.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17661
Summary: Primarily, this splits individual sections of the single account page into a more managable and robust sidenav for subscriptions, billing, and managers. The functionality on the subpages is light, but I expect to build on then in coming diffs. This also starts building out a more effective "status" area on the lead page.
Test Plan:
- Load up default account
- Make some edits
- Click on each of the new navigation items
- Verify links to "see all" work
- Test overdue and no payment states for status
{F4337317}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17589
Summary: There is currently a validation error triggered if you initialize a new account without a member set. I think this is the correct fix, but let me know.
Test Plan: truncate phortune_account database, navigate to phortune, see account automatically created to "Default Account".
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17657
Summary: Fixes T12541. `describeAutomaticCapability()` is no longer required to implement `PolicyInterface`. Use PolicyCodex instead.
Test Plan: {F4889642}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12541
Differential Revision: https://secure.phabricator.com/D17658
Summary: Builds out Phortune Merchant pages to have a sidenav and sub-pages for further expansion. For now this links Orders and Subscriptions to the query engine pages, but could be split out to be more informative (unpaid, upcoming, etc).
Test Plan:
Create a new merchant, edit some information, add a manager in new UI, edit logo, click through to subscriptions, orders.
{F4883013}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17655
Summary: This updates the backend of PhortuneAccount to use EditEngine and Modular Transactions and updates language to "account manager" for clarity of role.
Test Plan:
- Wiped `phortune_account` table
- Visit Phortune, see new account automatically created.
- Edit name and managers
- Try to set no name or remove myself as a manager, get error messages
- Visit `/phortune/` and create another new account
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17585
Summary: Fixes T12536. Nothing reads this parameter; `PhabricatorFile::newChunkedFile` sets the `isPartial` flag automatically.
Test Plan: Grepped for `isPartial`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12536
Differential Revision: https://secure.phabricator.com/D17654
Summary:
Previously, "reject" and "reject older" were separate statuses. Now, they're both shades of "reject".
Set the "older reject" flag properly when we find a non-current reject.
Test Plan:
- User A accepts a revision.
- User B rejects it.
- Author updates it.
- Before patch: incorrectly transitions to "accepted" ("older" reject is ignored).
- After patch: correctly transitions to "needs review".
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17653
Summary: Modernize PhortuneMerchant for Modular Transactions. Also changed the language of "Members" to "Managers", which I think fits better given the power/capability.
Test Plan:
- Create a new Merchant
- Test not filling in a name, see error
- Test removing myself, see error
- Edit an existing Merchant
- Add new managers
- Test removing myself, see error
- Replace Picture
- Update various fields, contact info, email, footer
- Verify transactions are now nice and pretty
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17584
Summary:
Fixes T12531. Strictness fallout from adding typechecking in D17616.
- `chunkedHash` is not a real parameter, so the new typechecking was unhappy about it.
- `mime-type` no longer allows `null`.
Test Plan:
- Ran `arc upload --conduit-uri ... 12MB.zero` on a 12MB file full of zeroes.
- Before patch: badness, failure, fallback to one-shot uploads.
- After patch: success and glory.
Reviewers: chad
Subscribers: joshuaspence
Maniphest Tasks: T12531
Differential Revision: https://secure.phabricator.com/D17651
Summary: Fixes T12138. Test for the presence of being in fullscreen mode, and disable send on enter if present. Side note, I'd love a first class "hasClass" type Javelin function.
Test Plan:
- Go to Conpherence
- Type some smack, see it send on enter
- Go fullscreen like a boss
- Let the words flow
- Close fullscreen, then send on enter.
- (might be nice someday to add a "submit" button to fullscreen editor)
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12138
Differential Revision: https://secure.phabricator.com/D17590
Summary:
Fixes T12356.
- In this mail, we currently render "6:00 AM". Instead, render "6:00 AM (PDT)" or similar. This is consistent with times in other modern Transaction mail.
- Previously, we would render "UTC-7". Render "PDT" instead. For obscure zones with no known timezone abbreviation, fall back to "UTC-7".
Test Plan:
- Used `bin/calendar notify --minutes X` to trigger notifications, read email bodies.
- Used this script to list all `T` values and checked them for sanity:
```lang=php
<?php
$now = new DateTime();
$locales = DateTimeZone::listIdentifiers();
foreach ($locales as $locale) {
$zone = new DateTimeZone($locale);
$now->setTimeZone($zone);
printf(
"%s (%s)\n",
$locale,
$now->format('T'));
}
```
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12356
Differential Revision: https://secure.phabricator.com/D17646
Summary:
Ref T11816. Depends on D17644. When you executed a query like "upcoming, limit 5 events" you might match some recurring events starting from, say, a year ago and repeating every month.
We'd then generate the first 5 ghosts for these events (say, last January, February, ... May) and later throw them out, so the correct events in the query window (say, this April) would never get generated.
Instead, generate ghosts beginning with the start of the window. The fix in D17644 to number results correctly allows us to do this.
Test Plan:
- Made a query panel showing 5 events, scheduled an event long in the past, did not visit any of the instances of it so they didn't generate concrete objects.
- Before the patch, near-future instances failed to show; after the patch, they show.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D17645
Summary:
Ref T11816. Two minor issues:
- We used `$event`, not `$next_event`, as the event providing the PHID for "Busy at <event name>". This rendered "Busy at <most future event>" on the profile instead of "Busy at <next upcoming event".
- The TTL computation used the event start, not the event end, so we could end up rebuilding the cache too often for users busy at an event.
Test Plan:
- Attended an event in the near future and one later on.
- Saw profile now say "busy at <near future event>" correctly.
- In DarkConsole "Services" tab, no longer saw unnecessary cache refills while attending an event.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11816
Differential Revision: https://secure.phabricator.com/D17643
Summary: Ref T4245. We disallow `/diffusion/` in robots.txt already because indexers tend to get lost blaming every line of every file throughout history, but didn't update the list for the `/source/` alias. Update it.
Test Plan: Visited `/robots.txt` locally.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T4245
Differential Revision: https://secure.phabricator.com/D17637
Summary: Ref T12509. This encourages code to move away from HMAC+SHA1 by making the method name more obviously undesirable.
Test Plan: `grep`, browsed around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12509
Differential Revision: https://secure.phabricator.com/D17632
Summary:
Ref T12509. Many of the calls to HMAC+SHA1 are just to compute cachekeys for remarkup objects.
Make these use HMAC+SHA256 instead. There is no downside to swapping these since they just cause a cache miss in the worst case.
I also plan to get rid of `PhabricatorMarkupInterface` eventually, but this doesn't go that far.
Test Plan: Browsed some different types of documents (tasks, legalpad documents, phame blogs / posts, pholio mocks, etc).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12509
Differential Revision: https://secure.phabricator.com/D17631
Summary:
Ref T12509. This adds support for HMAC+SHA256 (instead of HMAC+SHA1). Although HMAC+SHA1 is not currently broken in any sense, SHA1 has a well-known collision and it's good to look at moving away from HMAC+SHA1.
The new mechanism also automatically generates and stores HMAC keys.
Currently, HMAC keys largely use a per-install constant defined in `security.hmac-key`. In theory this can be changed, but in practice essentially no install changes it.
We generally (in fact, always, I think?) don't use HMAC digests in a way where it matters that this key is well-known, but it's slightly better if this key is unique per class of use cases. Principally, if use cases have unique HMAC keys they are generally less vulnerable to precomputation attacks where an attacker might generate a large number of HMAC hashes of well-known values and use them in a nefarious way. The actual threat here is probably close to nonexistent, but we can harden against it without much extra effort.
Beyond that, this isn't something users should really have to think about or bother configuring.
Test Plan:
- Added unit tests.
- Used `bin/files integrity` to verify, strip, and recompute hashes.
- Tampered with a generated HMAC key, verified it invalidated hashes.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12509
Differential Revision: https://secure.phabricator.com/D17630
Summary:
Ref T12470. Provides an "integrity" utility which runs in these modes:
- Verify: check that hashes match.
- Compute: backfill missing hashes.
- Strip: remove hashes. Useful for upgrading across a hash change.
- Corrupt: intentionally corrupt hashes. Useful for debugging.
- Overwrite: force hash recomputation.
Users normally shouldn't need to run any of this stuff, but this provides a reasonable toolkit for managing integrity hashes.
I'll recommend existing installs use `bin/files integrity --compute all` in the upgrade guidance to backfill hashes for existing files.
Test Plan:
- Ran the script in many modes against various files, saw expected operation, including:
- Verified a file, corrupted it, saw it fail.
- Verified a file, stripped it, saw it have no hash.
- Stripped a file, computed it, got a clean verify.
- Stripped a file, overwrote it, got a clean verify.
- Corrupted a file, overwrote it, got a clean verify.
- Overwrote a file, overwrote again, got a no-op.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12470
Differential Revision: https://secure.phabricator.com/D17629
Summary:
Ref T12298. The PullLocal daemon has had hibernation code for a little while, but it never actually activated because we don't sleep for more than 15 seconds in any case.
Add a maximum sleep instead and use that to control the longest sleep we'll do for hibernation purposes.
Also, when a repository or repository URI is edited, write a NEEDS_UPDATE event into the message table to make sure the daemons de-hibernate.
Test Plan: Used `bin/phd debug pull`, saw the daemon actually hibernate instead of just sleeping for 15 seconds.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12298
Differential Revision: https://secure.phabricator.com/D17635
Summary:
Ref T12272. I wrote this correctly, then broke it by adding the simplification which treats "accept the defaults" as "accept everything".
This simplification lets us render "epriestley accepted this revision." instead of "epriestley accepted this revision onbehalf of: long, list, of, every, default, reviewer, they, have, authority, over." so it's a good thing, but make it only affect the reviewers it's supposed to affect.
Test Plan:
- Did an accept with a force-accept available but unchecked.
- Before patch: incorrectly accepted all possible reviewers.
- After patch: accepted only checked reviewers.
- Also checked the force-accept box, accepted, got a proper force-accept.
Reviewers: chad, lvital
Reviewed By: lvital
Maniphest Tasks: T12272
Differential Revision: https://secure.phabricator.com/D17634
Summary: Allow API callers to retrieve reviewer information via a new "reviewers" attachment.
Test Plan: {F4675784}
Reviewers: chad, lvital
Reviewed By: lvital
Subscribers: lvital
Differential Revision: https://secure.phabricator.com/D17633
Summary: Fixes T12508. Files don't have an `editPolicy`, and we started actually checking that the keys are real things in D17616.
Test Plan:
- Before patch: created a paste, got an "editPolicy" exception.
- After patch: created a paste that worked properly.
Reviewers: avivey, chad
Reviewed By: avivey
Maniphest Tasks: T12508
Differential Revision: https://secure.phabricator.com/D17628
Summary:
Ref T12219. We currently only support Range requests like "bytes=123-456", but "bytes=123-", meaning "until end of file", is valid, and Chrome can send these requests.
I suspect this is the issue with T12219.
Test Plan: Used `nc local.phacility.com 80` to pipe raw requests, saw both "bytes=123-456" and "bytes=123-" requests satisfied correctly.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12219
Differential Revision: https://secure.phabricator.com/D17626
Summary:
Ref T12470. This helps defuse attacks where an adversary can directly take control of whatever storage engine files are being stored in and change data there. These attacks would require a significant level of access.
Such attackers could potentially attack ranges of AES-256-CBC encrypted files by using Phabricator as a decryption oracle if they were also able to compromise a Phabricator account with read access to the files.
By storing a hash of the data (and, in the case of AES-256-CBC files, the IV) when we write files, and verifying it before we decrypt or read them, we can detect and prevent this kind of tampering.
This also helps detect mundane corruption and integrity issues.
Test Plan:
- Added unit tests.
- Uploaded new files, saw them get integrity hashes.
- Manually corrupted file data, saw it fail. Used `bin/files cat --salvage` to read it anyway.
- Tampered with IVs, saw integrity failures.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12470
Differential Revision: https://secure.phabricator.com/D17625
Summary:
Fixes T12079. Currently, when a file is encrypted and a request has "Content-Range", we apply the range first, //then// decrypt the result. This doesn't work since you can't start decrypting something from somewhere in the middle (at least, not with our cipher selection).
Instead: decrypt the result, //then// apply the range.
Test Plan: Added failing unit tests, made them pass
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12079
Differential Revision: https://secure.phabricator.com/D17623
The root issue here is actually just that I cherry-picked stable locally
but did not push it. However, this is a minor issue I also caught while
double-checking things.
Auditors: chad
Summary:
Ref T12464. This defuses any possible SHA1-collision attacks by using SHA256, for which there is no known collision.
(SHA256 hashes are larger -- 256 bits -- so expand the storage column to 64 bytes to hold them.)
Test Plan:
- Uploaded the same file twice, saw the two files generate the same SHA256 content hash and use the same underlying data.
- Tried with a fake hash algorihtm ("quackxyz") to make sure the failure mode worked/degraded correctly if we don't have SHA256 for some reason. Got two valid files with two copies of the same data, as expected.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12464
Differential Revision: https://secure.phabricator.com/D17620
Summary:
Ref T12464. We currently use SHA1 to detect when two files have the same content so we don't have to store two copies of the data.
Now that a SHA1 collision is known, this is theoretically dangerous. T12464 describes the shape of a possible attack.
Before replacing this with something more robust, shore things up so things work correctly if we don't hash at all. This mechanism is entirely optional; it only helps us store less data if some files are duplicates.
(This mechanism is also less important now than it once was, before we added temporary files.)
Test Plan: Uploaded multiple identical files, saw the uploads work and the files store separate copies of the same data.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12464
Differential Revision: https://secure.phabricator.com/D17619
Summary:
Ref T12464. This is a very old method which let you create a file on the server by referring to data which already existed in another file.
Basically, long ago, `arc` could say "Do you already have a file with hash X?" and just skip some work if the server did.
`arc` has not called this method since D13017, in May 2015.
Since it's easy to do so, just make this method pretend that it never has the file. Very old clients will continue to work, since they would expect this response in the common case and continue by uploading data.
Test Plan:
- Grepped for `uploadhash` in Phabricator and Arcanist.
- Called the method with the console, verified it returned `null`.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12464
Differential Revision: https://secure.phabricator.com/D17618
Summary:
Ref T12464. This is a very old method which can return an existing file instead of creating a new one, if there's some existing file with the same content.
In the best case this is a bad idea. This being somewhat reasonable predates policies, temporary files, etc. Modern methods like `newFromFileData()` do this right: they share underlying data in storage, but not the actual `File` records.
Specifically, this is the case where we get into trouble:
- I upload a private file with content "X".
- You somehow generate a file with the same content by, say, viewing a raw diff in Differential.
- If the diff had the same content, you get my file, but you don't have permission to see it or whatever so everything breaks and is terrible.
Just get rid of this.
Test Plan:
- Generated an SSH key.
- Viewed a raw diff in Differential.
- (Did not test Phragment.)
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T12464
Differential Revision: https://secure.phabricator.com/D17617
Summary:
Ref T11357. When creating a file, callers can currently specify a `ttl`. However, it isn't unambiguous what you're supposed to pass, and some callers get it wrong.
For example, to mean "this file expires in 60 minutes", you might pass either of these:
- `time() + phutil_units('60 minutes in seconds')`
- `phutil_units('60 minutes in seconds')`
The former means "60 minutes from now". The latter means "1 AM, January 1, 1970". In practice, because the GC normally runs only once every four hours (at least, until recently), and all the bad TTLs are cases where files are normally accessed immediately, these 1970 TTLs didn't cause any real problems.
Split `ttl` into `ttl.relative` and `ttl.absolute`, and make sure the values are sane. Then correct all callers, and simplify out the `time()` calls where possible to make switching to `PhabricatorTime` easier.
Test Plan:
- Generated an SSH keypair.
- Viewed a changeset.
- Viewed a raw diff.
- Viewed a commit's file data.
- Viewed a temporary file's details, saw expiration date and relative time.
- Ran unit tests.
- (Didn't really test Phragment.)
Reviewers: chad
Reviewed By: chad
Subscribers: hach-que
Maniphest Tasks: T11357
Differential Revision: https://secure.phabricator.com/D17616
Summary:
Ref T11357. In D17611, I added `file.search`, which includes a `"dataURI"`. Partly, this is building toward resolving T8348.
However, in some cases you can't GET this URI because of a security measure:
- You have not configured `security.alternate-file-domain`.
- The file isn't web-viewable.
- (The request isn't an LFS request.)
The goal of this security mechanism is just to protect against session hijacking, so it's also safe to disable it if the viewer didn't present any credentials (since that means there's nothing to hijack). Add that exception, and reorganize the code a little bit.
Test Plan:
- From the browser (with a session), tried to GET a binary data file. Got redirected.
- Got a download with POST.
- From the CLI (without a session), tried to GET a binary data file. Go a download.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11357
Differential Revision: https://secure.phabricator.com/D17613
Summary: Ref T11357. Implements a modern `file.search` for files, and freezes `file.info`.
Test Plan: Ran `file.search` from the Conduit console.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11357
Differential Revision: https://secure.phabricator.com/D17612
Summary:
Ref T11357. This moves editing and commenting (but not creation) to EditEngine.
Since only the name is really editable, this is pretty straightforward.
Test Plan: Renamed files; commented on files.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11357
Differential Revision: https://secure.phabricator.com/D17611
Summary: Ref T11357. A lot of file creation doesn't go through transactions, so we only actually have one real transaction type: editing a file name.
Test Plan:
Created and edited files.
{F4559287}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11357
Differential Revision: https://secure.phabricator.com/D17610
Summary:
Fixes T12502. This transaction probably should not be getting picked for feed rendering, but it currently does get selected in some cases.
This should probably be revisited eventually (e.g., when Maniphest moves to ModularTransactions) but just fix the brokenness for now.
Test Plan:
- Created a task in a space.
- Viewed feed.
- Saw the story render with readable text.
{F4555747}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12502
Differential Revision: https://secure.phabricator.com/D17609
Summary:
Fixes T12496. Sticky accept was accidentally impacted by the "void" changes in D17566.
Instead, don't always downgrade all accepts/rejects: on update, we only want to downgrade accepts.
Test Plan:
- With sticky accept off, updated an accepted revision: new state is "needs review".
- With sticky accept on, updated an accepted revision: new state is "accepted" (sticky accept working correctly).
- Did "reject" + "request review" to make sure that still works, worked fine.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12496
Differential Revision: https://secure.phabricator.com/D17605
Summary:
Fixes T12461. This returns the field as a dictionary with a `"raw"` value, so we could eventually do this if we want without breaking the API:
```
{
"type": "remarkup",
"raw": "**raw**",
"html": "<strong>raw</strong>",
"text": "raw"
}
```
Test Plan: Called `maniphest.search`, reviewed output.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12461
Differential Revision: https://secure.phabricator.com/D17603
Summary: Ref T12450. These are like 95% my fault, but Elastic appears to spell the name "Elasticsearch" consistently in their branding.
Test Plan: `grep ElasticSearch`
Reviewers: chad, 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17601
Summary:
Ref T12450. We track a "document version" for updating search indexes, so that if a document is rapidly updated many times in a row we can skip most of the work.
However, this version doesn't consider "cluster.search" configuration, so if you add a new service (like a new ElasticSearch host) we still think that every document is up-to-date. When you run `bin/search index` to populate the index (without `--force`), we just do nothing.
This isn't necessarily very obvious. D17597 makes it more clear, by printing "everything was skipped and nothing happened" at the end.
Here, fix the issue by considering the content of "cluster.search" when computing fulltext document versions: if you change `cluster.search`, we throw away the version index and reindex everything.
This is slightly more work than we need to do, but changes to "cluster.search" are rare and this is much easier than trying to individually track which versions of which documents are in which services, which probably isn't very useful anyway.
Test Plan:
- Ran `bin/search index --type project`, saw everything get skipped.
- Changed `cluster.search`.
- Ran `search index` again, saw everything get updated.
- Ran a third time without changing `cluster.search`, everything was properly skipped.
Reviewers: chad, 20after4
Reviewed By: 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17598
Summary:
Ref T12450. There's currently a bad behavior where inserting a document into one search service marks it as up to date everywhere.
This isn't nearly as obvious as it should be because `bin/search index` doesn't make it terribly clear when a document was skipped because the index version was already up to date.
When running `bin/seach index` without `--force` or `--background`, keep track of updated vs not-updated documents and print out some guidance. In other configurations, try to provide more help too.
Test Plan: {F4452134}
Reviewers: chad, 20after4
Reviewed By: 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17597
Summary:
Ref T12450. This was added a very very long time ago (D2298).
I don't want to put this in the upstream index anymore because I don't want to encourage third parties to develop software which reads the index directly. Reading the index directly is a big skeleton key which bypasses policy checks.
This was added before much of the policy model existed, when that wasn't as much of a concern. On a tecnhnical note, this also doesn't update when `phabricator.base-uri` changes.
This can be written as a search index extension if an install relies on it for some bizarre reason, although none should and I'm unaware of any actual use cases in the wild for it, even at Facebook.
Test Plan: Indexed some random stuff into ElasticSearch.
Reviewers: chad, 20after4
Reviewed By: chad
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17600
Summary:
D17384 added a "keywords" field but only partially implemented it.
- Remove this field.
- Index project slugs as part of the document body instead.
Test Plan:
- Ran `bin/search index PHID-PROJ-... --force`.
- Found project by searching for a unique slug.
Reviewers: chad, 20after4
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17596
Summary: Minor, uses 'user-circle' for account, and merchant logo for merchants in lists.
Test Plan: View the landing page, see updated logos and icons.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17586
Summary: Move individual controller files into cooresponding folders. Makes it easier to locate sections and expand without clutter. Also made "chargelist" part of account since it's tied to having an account specifically.
Test Plan: Vist charges, merchants, subscription, accounts, and other pages. No errors from file move.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17587
Summary:
Two little issues
1. there was an extra call to getHostForWrite,
2. The engine instance was shared between multiple service definitions so it
was overwriting the list of writable hosts from one service with hosts from another.
Test Plan:
tested in wikimedia production with multiple services defined like this:
```language=json
[
{
"hosts": [
{
"host": "search.svc.codfw.wmnet",
"protocol": "https",
"roles": {
"read": true,
"write": true
},
"version": 5
}
],
"path": "/phabricator",
"port": 9243,
"type": "elasticsearch"
},
{
"hosts": [
{
"host": "search.svc.eqiad.wmnet",
"protocol": "https",
"roles": {
"read": true,
"write": true
},
"version": 5
}
],
"path": "/phabricator",
"port": 9243,
"type": "elasticsearch"
}
]
```
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: epriestley
Differential Revision: https://secure.phabricator.com/D17581
Summary:
Elasticsearch really wants a raw json body and it fails to accept
the request as of es version 5.3
Test Plan:
Tested with elasticsearch 5.2 and 5.3.
Before this change 5.2 worked but 5.3 failed with
`HTTP/406 "Content-Type header [application/x-www-form-urlencoded] is not supported"` [1]
After this change, both worked.
[1] https://phabricator.wikimedia.org/P5158
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17580
Summary:
These exception messages & comments didn't quite match reality.
Fixed and added pht() around a couple of them.
Test Plan: I didn't test this :P
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17578
Summary:
Ref T12450. Normally, we validate config when:
- You restart the webserver.
- You edit it with `bin/config set ...`.
- You edit it with the web UI.
However, you can also change config by editing `local.json`, `some_env.conf.php`, a `SiteConfig` class, etc. In these cases, you may miss config warnings.
Explicitly re-run search config checks from `bin/search`, similar to the additional database checks we run from `bin/storage`, to try to produce a better error message if the user has made a configuration error.
Test Plan:
```
$ ./bin/search init
Usage Exception: Setting "cluster.search" is misconfigured: Invalid search engine type: elastic. Valid types are: elasticsearch, mysql.
```
Reviewers: chad, 20after4
Reviewed By: 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17574
Summary:
Ref T12450. This is now pointless and just asserts that `cluster.search` has a default value.
We might restore a fancier version of this eventually, but get rid of this for now.
Test Plan: Scruitinized the test case.
Reviewers: chad, 20after4
Reviewed By: 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17573
Summary:
Ref T12450. This mostly just smooths out the text a little to improve consistency. Also:
- Use `isWritable()`.
- Make the "skipping because not writable" message more clear and tailored.
- Try not to use the word "index" too much to avoid confusion with `bin/search index` -- instead, talk about "initialize a service".
Test Plan: Ran `bin/search init` with a couple of different (writable / not writable) configs, saw slightly clearer messaging.
Reviewers: chad, 20after4
Reviewed By: 20after4
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17572
Summary:
[ ] Write an "Upgrading: ..." guidance task with narrow instructions for installs that are upgrading.
[ ] Do we need to add an indexing activity (T11932) for installs with ElasticSearch?
[ ] We should more clearly detail exactly which versions of ElasticSearch are supported (for example, is ElasticSearch <2 no longer supported)? From T9893 it seems like we may //only// have supported ElasticSearch <2 before, so are the two regions of support totally nonoverlapping and all ElasticSearch users will need to upgrade?
[ ] Documentation should provide stronger guidance toward MySQL and away from Elastic for the vast majority of installs, because we've historically seen users choosing Elastic when they aren't actually trying to solve any specific problem.
[ ] When users search for fulltext results in Maniphest and hit too many documents, the current behavior is approximately silent failure (see T12443). D17384 has also lowered the ceiling for ElasticSearch, although previous changes lowered it for MySQL search. We should not fail silently, and ideally should build toward T12003.
[ ] D17384 added a new "keywords" field, but MySQL does not search it (I think?). The behavior should be as consistent across MySQL and Elastic as we can make it. Likely cleaner is giving "Project" objects a body, with "slugs" and "description" separated by newlines?
[ ] `PhabricatorSearchEngineTestCase` is now pointless and only detects local misconfigurations.
[ ] It would be nice to build a practical test suite instead, where we put specific documents into the index and then search for them. The upstream test could run against MySQL, and some `bin/search test` could run against a configured engine like ElasticSearch. This would make it easier to make sure that behavior was as uniform as possible across engine implementations.
[ ] Does every assigned task now match "user" in ElasticSearch?
[x] `PhabricatorElasticFulltextStorageEngine` has a `json_encode()` which should be `phutil_json_encode()`.
[ ] `PhabricatorSearchService` throws an untranslated exception.
[ ] When a search cluster is down, we probably don't degrade with much grace (unhandled exception)?
[ ] I haven't run bin/search init, but bin/search index doesn't warn me that I may want to. This might be worth adding. The UI does warn me.
[ ] bin/search init warns me that the index is "incorrect". It might be more clear to distinguish between "missing" and "incorrect", since it's more comforting to users to see "everything is as we expect, doing normal first-time setup now" than "something is wrong, fixing it".
[ ] CLI message "Initializing search service "ElasticSearch"" does not end with a period, which is inconsistent with other UI messages.
[ ] It might be nice to let bin/search commands like init and index select a specific service (or even service + host) to act on, as bin/storage --ref ... now does. You can generally get the result you want by fiddling with config.
[ ] When a service isn't writable, bin/search init reports "Search cluster has no hosts for role "write".". This is accurate but does not provide guidance: it might be more useful to the user to explain "This service is not writable, so we're skipping index check for it.".
[x] Even with write off for MySQL, bin/search index --type task --trace still updates MySQL, I think? I may be misreading the trace output. But this behavior doesn't make sense if it is the actual behavior, and it seems like reindexAbstractDocument() uses "all services", not "writable services", and the MySQL engine doesn't make sure it's writable before indexing.
[x] Searching or user fails to find task Grant users tokens when a mention is created, suggesting that stemming is not working.
[x] Searching for users finds that task, but fails to find a task containing "per user per month" in a comment, also suggesting that stemming is not working.
[x] Searching for maniphest fails to find task maniphest.query elephant, suggesting that tokenization in ElasticSearch is not as good as the MySQL tokenization for these words (see D17330).
[x] The "index incorrect" warning UI uses inconsistent title case.
[x] The "index incorrect" warning UI could format the command to be run more cleanly (with addCommand(), I think).
refs T12450
Test Plan:
* Stared blankly at the code.
* Disabled 'write' role on mysql fulltext service.
* Edited a task, ran search indexer, verified that the mysql index wasn't being updated.
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin
Maniphest Tasks: T12450
Differential Revision: https://secure.phabricator.com/D17564
Summary:
Ref T12272. If you own a package which owns "/", this allows you to force-accept package reviews for packages which own sub-paths, like "/src/adventure/".
The default UI looks something like this:
```
[X] Accept as epriestley
[X] Accept as Root Package
[ ] Force accept as Adventure Package
```
By default, force-accepts are not selected.
(I may do some UI cleanup and/or annotate "because you own X" in the future and/or mark these accepts specially in some way, particularly if this proves confusing along whatever dimension.)
Test Plan: {F4314747}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12272
Differential Revision: https://secure.phabricator.com/D17569
Summary: Ref T10967. This change is similar to D17566, but for rejects.
Test Plan:
- Create a revision as A, with reviewer B.
- Reject as B.
- Request review as A.
- Before patch: stuck in "rejected".
- After patch: transitions back to "needs review".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17568
Summary: Ref T10967. This moves all remaining "request review" pathways (just `differential.createcomment`) to the new code, and removes the old action.
Test Plan: Requested review on a revision, `grep`'d for the action constant.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17567
Summary:
Ref T10967. This is explained in more detail in T10967#217125
When an author does "Request Review" on an accepted revision, void (in the sense of "cancel out", like a bank check) any "accepted" reviewers on the current diff.
Test Plan:
- Create a revision with author A and reviewer B.
- Accept as B.
- "Request Review" as A.
- (With sticky accepts enabled.)
- Before patch: revision swithced back to "accepted".
- After patch: the earlier review is "voided" by te "Request Review", and the revision switches to "Review Requested".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17566
Summary: Before the speling pollice lock us in prisun.
Test Plan: Used a dicationairey.
Reviewers: chad, jmeador
Reviewed By: jmeador
Differential Revision: https://secure.phabricator.com/D17570
Summary:
This implements a simplistic `PhabricatorRepositoryFulltextEngine`
Currently only the repository name, description, timestamps and
status are indexed.
Note: I had to change the `search index` workflow to disambiguate
PhabricatorRepository from PhabricatorRepositoryCommit
Test Plan:
* ran `./bin/search index --type PhabricatorRepository --force`
* searched for some repositories. Saw reasonable results matching on either title or description.
* Edited a repository in the web ui
* Added unique key words to the repo description.
* I was then able to find that repo by searching for the new keywords.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Tags: #search, #diffusion
Differential Revision: https://secure.phabricator.com/D17300
Summary:
The goal is to make fulltext search back-ends more extensible, configurable and robust.
When this is finished it will be possible to have multiple search storage back-ends and
potentially multiple instances of each.
Individual instances can be configured with roles such as 'read', 'write' which control
which hosts will receive writes to the index and which hosts will respond to queries.
These two roles make it possible to have any combination of:
* read-only
* write-only
* read-write
* disabled
This 'roles' mechanism is extensible to add new roles should that be needed in the future.
In addition to supporting multiple elasticsearch and mysql search instances, this refactors
the connection health monitoring infrastructure from PhabricatorDatabaseHealthRecord and
utilizes the same system for monitoring the health of elasticsearch nodes. This will
allow Wikimedia's phabricator to be redundant across data centers (mysql already is,
elasticsearch should be as well).
The real-world use-case I have in mind here is writing to two indexes (two elasticsearch clusters
in different data centers) but reading from only one. Then toggling the 'read' property when
we want to migrate to the other data center (and when we migrate from elasticsearch 2.x to 5.x)
Hopefully this is useful in the upstream as well.
Remaining TODO:
* test cases
* documentation
Test Plan:
(WARNING) This will most likely require the elasticsearch index to be deleted and re-created due to schema changes.
Tested with elasticsearch versions 2.4 and 5.2 using the following config:
```lang=json
"cluster.search": [
{
"type": "elasticsearch",
"hosts": [
{
"host": "localhost",
"roles": { "read": true, "write": true }
}
],
"port": 9200,
"protocol": "http",
"path": "/phabricator",
"version": 5
},
{
"type": "mysql",
"roles": { "write": true }
}
]
Also deployed the same changes to Wikimedia's production Phabricator instance without any issues whatsoever.
```
Reviewers: epriestley, #blessed_reviewers
Reviewed By: epriestley, #blessed_reviewers
Subscribers: Korvin, epriestley
Tags: #elasticsearch, #clusters, #wikimedia
Differential Revision: https://secure.phabricator.com/D17384
If we try to render an edge transaction which uses unknown edge constants,
it turns out we fatal. Degrade instead. This happened when viewing very old
badges.
Auditors: chad
Summary: Ships Badges. I can write up some basic docs too if needed.
Test Plan: /applications/
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17360
Summary: Ref T12270. These no longer have any callsites.
Test Plan: Used `grep` to search for each edge class constant, found no hits.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17562
Summary: Ref T12270. Adds a pager, plus a few little cleanups from copy/paste and accumulated cruft.
Test Plan:
- Paginated a user with 180 badges.
- Viewed a user with 0 badges.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17561
Summary:
Ref T11050. The old rule was "you can only resign if you're a reviewer".
With the new behavior of "resign", the rule should be "you can resign if you're a reviewer, or you have authority over any reviewer". Make it so.
Also fixes T12446. I don't know how to reproduce that but I'm pretty sure this'll fix it?
Test Plan:
- Could not resign from a revision with no authority/reviewer.
- Resigned from a revision with myself as a reviewer.
- Resigned from a revision with a package I owned as a reviewer.
- Could not resign from a revision I had already resigned from.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12446, T11050
Differential Revision: https://secure.phabricator.com/D17558
Summary:
Ref T12298. Two minor daemon improvements:
- Make the "waiting" message reflect hibernation.
- Don't trigger a reload right after launching.
Test Plan:
- Read "waiting" message.
- Ran "bin/phd start", didn't see an immediate SIGHUP in the log.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12298
Differential Revision: https://secure.phabricator.com/D17550
Summary: Fixes T9363. This drops empty buckets from dashboard panel context. Still see full results in Audit.
Test Plan: Create an "Active Audits" panel, add to Dashboard. See no commits found. Check Audit, see all buckets.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9363
Differential Revision: https://secure.phabricator.com/D17545
Summary: Ref T9363, If we're in a dashboard panel, only show buckets with data, or a fallback if nothing exists.
Test Plan: Test 'active revisions' panel in a dashboard and in Differential.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9363
Differential Revision: https://secure.phabricator.com/D17544
Summary: Ref T12298. This allows the PullLocal daemon to hibernate like the Trigger daemon, but automatically wakes it back up when it needs to do something.
Test Plan:
- Ran `bin/phd debug pulllocal --trace`.
- Saw the daemon hibernate after doing a checkup on repositories.
- Saw periodic queries to look for new update messages.
- After clicking "Update Now" in the web UI to schedule an update, saw the daemon wake up immediately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12298
Differential Revision: https://secure.phabricator.com/D17540
Summary:
Ref T12444. A few issues:
- `x % (y - z)` doesn't generate values in the full range: the largest value is never generated. Instead, use `x % (1 + y - z)`.
- `digestToRange(1, count)` never generates 0. After fixing the first bug, it could generate `count`. The range of the arrays is `0..(count-1)`, inclusive. Generate the correct range instead.
- `unpack('L', ...)` can unpack a negative number on a 32-bit system. Use `& 0x7FFFFFFF` to mask off the sign bit so the result is always a positive integer.
- FileFinder might return arbitrary keys, but we rely on sequential keys (0, 1, 2, ...)
Test Plan:
- Used `bin/people profileimage ... --force` to regenerate images.
- Added some debugging to verify that the math seemed to be working.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12444
Differential Revision: https://secure.phabricator.com/D17543
Summary:
Fixes T12369. When you create objects they may technically be locked: either because the default state is legitimately locked, or because the default policies prevent you from viewing so we sort of technically end in a locked state.
Regardless, don't prompt during creation, since this prompt isn't useful even if the lock detection is completely legitimate.
Test Plan:
- In {nav Applications > Maniphest > Configure}, set "Default View Policy" to "No One".
- Tried to create a task.
- Before patch: prompted to override lock.
- After patch: no override prompt.
Reviewers: chad
Reviewed By: chad
Subscribers: d.maznekov
Maniphest Tasks: T12369
Differential Revision: https://secure.phabricator.com/D17541
Summary:
Ref T12271. Don't do anything with this yet, but store who accepted/rejected/whatever on behalf of reviewers.
In the future, we could use this to render stuff like "Blessed Committers (accepted by epriestley)" or whatever. I don't know that this is necessarily super useful, but it's easy to track, seems likely to be useful, and would be a gigantic pain to backfill later if we decide we want it.
Test Plan: Accepted/rejected a revision, saw reviewers update appropriately.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12271
Differential Revision: https://secure.phabricator.com/D17537
Summary:
Ref T12271. Currenty, when you "Accept" a revision, you always accept it for all reviewers you have authority over.
There are some situations where communication can be more clear if users can accept as only themselves, or for only some packages, etc. T12271 discusses some of these use cases in more depth.
Instead of making "Accept" a blanket action, default it to doing what it does now but let the user uncheck reviewers.
In cases where project/package reviewers aren't in use, this doesn't change anything.
For now, "reject" still acts the old way (reject everything). We could make that use checkboxes too, but I'm not sure there's as much of a use case for it, and I generally want users who are blocking stuff to have more direct accountability in a product sense.
Test Plan:
- Accepted normally.
- Accepted a subset.
- Tried to accept none.
- Tried to accept bogus reviewers.
- Accepted with myself not a reviewer
- Accepted with only one reviewer (just got normal "this will be accepted" text).
{F4251255}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12271
Differential Revision: https://secure.phabricator.com/D17533
Summary: Hit this while `arc diff`'ing something which is triggering 2+ rules which add reviewers, I think.
Test Plan: Dug this out of a production stack trace; will push and `arc diff` again.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17534
Summary: Fixes T12439. This pathway was just missing a `setContinueOnMissingFields(...)` to skip enforcement of required fields.
Test Plan:
- Added a required custom field.
- Mentioned any task without a field value in a comment.
- Edited that comment.
- Saved changes.
- Before fix: fatal in log.
- After fix: clean edit.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12439
Differential Revision: https://secure.phabricator.com/D17536
Summary:
Ref T10967. I'm not 100% sure we need this, but the old edge table had it and I recall an issue long ago where not having this key left us with a bad query plan.
Our data doesn't really provide a way to test this key (we have many revisions and few reviewers, so the query planner always uses revision keys), and building a convincing test case would take a while (lipsum needs some improvements to add reviewers). But in the worst case this key is mostly useless and wastes a few MB of disk space, which isn't a big deal.
So I can't conclusively prove that this key does anything to the dashboard query, but the migration removed it and I'm more comfortable keeping it so I'm not worried about breaking stuff.
At the very least, MySQL does select this key in the query plan when I do a "Reviewers:" query explicitly so it isn't //useless//.
Test Plan: Ran `bin/storage upgrade`, ran dashboard query, the query plan didn't get any worse.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17532
Summary:
Fixes T11050. Today, when a user resigns, we just delete the record of them ever being a reviewer.
However, this means you have no way to say "I don't care about this and don't want to see it on my dashboard" if you are a member of any project or package reviewers.
Instead, store "resigned" as a distinct state from "not a reviewer", and treat it a little differently in the UI:
- On the bucketing screen, discard revisions any responsible user has resigned from.
- On the main `/Dxxx` page, show these users as resigned explicitly (we could just hide them, too, but I think this is good to start with).
- In the query, don't treat a "resigned" state as a real "reviewer" (this change happened earlier, in D17517).
- When resigning, write a "resigned" state instead of deleting the row.
- When editing a list of reviewers, I'm still treating this reviewer as a reviewer and not special casing it. I think that's sufficiently clear but we could tailor this behavior later.
Test Plan:
- Resigned from a revision.
- Saw "Resigned" in reviewers list.
- Saw revision disappear from my dashboard.
- Edited revision, saw user still appear as an editable reviewer. Saved revision, saw no weird side effects.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T11050
Differential Revision: https://secure.phabricator.com/D17531
Summary: Fixes T12434. I accidentally copy/pasted this too much in D17442.
Test Plan: Viewed a form edit page, no longer saw two copies of this action.
Reviewers: chad, cspeckmim
Reviewed By: chad, cspeckmim
Maniphest Tasks: T12434
Differential Revision: https://secure.phabricator.com/D17530
Summary: Ref T10390. Catch if the user doesn't have any dashboards they can edit and give them a helpful message instead.
Test Plan: Clean install, no dashboards, Click "Add to Dashboard" on ApplicationSearch results, see no dashboards message
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17528
Summary: Ref T10390. Dashboard usability is high enough that I think we should pin it by default for users to create custom home pages.
Test Plan: Review order of applications in sandbox.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17527
Summary: Ref T10390. Fixes the missing "fa-dashboard" icon and adds a few more for an even 25.
Test Plan: Create new dashboard, see dashboard icon, select new dashboard icon.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17526
Summary: Ref T10390. I find myself wanting to find dashboards I can edit, even if I am not the author. I think this is useful for larger installs with multiple admins. Also make disabled Dashboards more grey in UI results.
Test Plan: Log in a test user, create a dashboard with I cannot edit. Log into my account, search for editable dashboards and only see mine. Set dashboard to all users, search under test account and see editable dashboards.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10390
Differential Revision: https://secure.phabricator.com/D17524
Summary: Ref T5307. Just makes the dialog a little easier to use. Picks a name if we already have one.
Test Plan: Test a builtin, custom saved, and a new advanced search (no name).
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5307
Differential Revision: https://secure.phabricator.com/D17523
Summary:
Ref T10967. Improves some method names:
- `Revision->getReviewerStatus()` -> `Revision->getReviewers()`
- `Revision->attachReviewerStatus()` -> `Revision->attachReviewers()`
- `Reviewer->getStatus()` -> `Reviewer->getReviewerStatus()` (this is mostly to make this more greppable)
Test Plan:
- bunch o' `grep`
- Browsed around.
- If I missed anything, it should fatal in an obvious way. We have a lot of other `getStatus()` calls and it's hard to be sure I got them all.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17522
Summary: Ref T10967. The old name was because we had a `getReviewers()` tied to `needRelationships()`, rename this method to use a simpler and more clear name.
Test Plan: `grep`, browsed around.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17519
Summary:
Ref T10967. There have been two different ways to load reviewers for a while: `needReviewerStatus()` and `needRelationships()`.
The `needRelationships()` stuff was a false start along time ago that didn't really go anywhere. I believe the idea was that we might want to load several different types of edges (subscribers, reviewers, etc) on lots of different types of objects. However, all that stuff pretty much ended up modularizing so that main `Query` classes did not need to know about it, so `needRelationships()` never got generalized or went anywhere.
A handful of things still use it, but get rid of them: they should either `needReviewerStatus()` to get reviewer info, or the ~3 callsites that care about subscribers can just load them directly.
Test Plan:
- Grepped for removed methods (`needRelationships()`, `getReviewers()`, `getCCPHIDs()`, etc).
- Browsed Diffusion, Differential.
- Called `differential.query`.
It's possible I missed some stuff, but it should mostly show up as super obvious fatals ("call needReviewerStatus() before getReviewerStatus()!").
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17518
Summary:
Ref T10967.
When we query for revisions with particular reviewers, use the new table to drive the query.
When we load revisions for use in the application, also use the new table to drive the query.
This doesn't convert everything: there's some old `loadRelationships()` stuff still using the old table. But this moves the major stuff over.
(This also changes the icon for "commented" from a question mark to a speech bubble.)
Test Plan:
- Viewed revision lists and detail views on old and new code, saw identical outcomes.
- Updated revisions, accepted/rejected/commented on revisions.
- Hit the "Accepted Older" and "Commented Older" states by taking an action and then updating.
- Grepped for removed methods (like `getEdgeData()` and `getDiffID()`).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17517
Summary:
Ref T10967. We have a "commented" state to help reviewers get a better sense of who is part of a discussion, and a "last action" state to help distinguish between "accept" and "accepted an older version", for the purposes of sticky accepts and as a UI hint.
Currently, these are first-class states, partly beacuse we were somewhat limited in what we could do with edges. However, a more flexible way to represent them is as flags separate from the primary state flag.
In the new storage, write them as separate state information: `lastActionDiffPHID` stores the Diff PHID of the last review action (accept, reject, etc). `lastCommentDiffPHID` stores the Diff PHID of the last comment (top-level or inline).
Test Plan: Applied storage changes, commented and acted on a revision. Saw appropriate state reflected in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17514
Summary:
Ref T10967. `differential.createcomment` is a frozen API method which has been obsoleted by `differential.revision.edit`.
It is the only remaining way to apply an "accept", "reject", or "resign" action using the old "ACTION" code.
Instead of using the old code, sneakly apply a new type of transaction in these cases instead.
Then, remove all the remaining old code for this stuff on the write pathways.
Test Plan:
- Used "differential.createcomment" to accept, reject, and resign from a revision.
- Grepped for all removed ACTION_X constants, found them only in rendering code.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17513
Summary: Ref T10967. See that task for some discussion. This lets us do double writes on this pathway.
Test Plan: Set an Owners package to auto-review. Created revisions which triggered it: one with no reviewers (autoreview added); one with the package as a blocking reviewer explicitly (no automatic stuff happened, as expected).
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17512
Summary:
Ref T10967. This converts the reviewer update action in Herald from an older edge write to a newer ModularTransactions write.
The major value from this is that we get a double-write to the new reviewers table.
Test Plan:
- Wrote a Herald rule to add a reviewer and a blocking reviewer.
- Saw them added properly to a revision with: no reviewers; both as blocking; A as blocking, B as nonblocking; A as nonblocking, B as blocking.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17511
Summary: Ref T5307. Actually check the built in query with query, not engine.
Test Plan: Try a builtin query, and a custom query when making a dashboard panel.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5307
Differential Revision: https://secure.phabricator.com/D17521
Summary: Ref T5307. Adds a better query check query, sets required for the name, adds the correct URI for cancelling.
Test Plan: Test a form without a name, fake a query string, test cancel button.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T5307
Differential Revision: https://secure.phabricator.com/D17520
Summary: Ref T5307. This adds an additional action to Use Results for creating a panel from the query.
Test Plan:
Navigate to Maniphest, select dropdown for Use Results. Try any of the following:
- Try to set a panel without a name (fail)
- Muck up query or engine (fail)
- Set a fake Dashboard ID (fail)
Give panel a name and select a dashboard I have edit permissions to, get taken to dashboard.
Reviewers: epriestley
Subscribers: Korvin
Maniphest Tasks: T5307
Differential Revision: https://secure.phabricator.com/D17516
Summary: Fixes T12416. See that task for discussion. Slightly older versions of `git` do not appear to support use of `--` to separate flags and arguments.
Test Plan:
- Ran `bin/repository update PHABX`.
- In T12416, had a user with Git 2.1.4 confirm that `git ls-remote X` worked while `git ls-remote -- X` failed.
- Read `git help ls-remote` to look for any kind of suspicious `--destroy-the-world` flags, didn't see any that made me uneasy.
Reviewers: chad, avivey
Reviewed By: avivey
Maniphest Tasks: T12416
Differential Revision: https://secure.phabricator.com/D17508
Summary:
Ref T5378. This repackages an existing check to see if a URI is a URI for the current install into a more reasonable form.
In an upcoming change, I'll use this new check to test whether `http://example.whatever.com/T123` is a link to a task on the current install or not.
Test Plan: This stuff has good test coverage already; added some more.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T5378
Differential Revision: https://secure.phabricator.com/D17502
Summary:
Ref T12392. The logic currently goes like this:
- Try a fetch.
- If that fails, try repairing the origin URI.
- Then try again.
This is pretty complicated, and we can use this simpler logic instead:
- Set the origin URI to the right value.
- Try a fetch.
Setting the origin URI is very fast. This can normally only get us in any trouble in very obscure situations which haven't occurred for many years:
- Pretty much all of this is already covered by `verifyGitOrigin()`, which we run earlier.
- Origins could be configured to have multiple URIs for some reason, but shouldn't be.
- Years ago, you could configure Phabricator to point at a local repository it didn't own and that could conceivably have a different "origin" that you might not want us to delete. If you did this, the daemons have been spewing errors for 3-4 years without you fixing it. The cost of fixing the remote URI is very small even if anyone is affected by this (just set it back to the old value) and there's zero reason to do this and the scenario is ridiculous.
Test Plan: Ran `bin/repository update PHABX --trace --verbose`, saw fetches go through cleanly after URI adjustment.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12392
Differential Revision: https://secure.phabricator.com/D17498
Summary:
Ref T12296. Ref T12392. Currently, when we're observing a remote repository, we periodically run `git fetch ...`.
Instead, periodically run `git ls-remote` (to list refs in the remote) and `git for-each-ref` (to list local refs) and only continue if the two lists are different.
The motivations for this are:
- In T12296, it appears that doing this is //faster// than doing a no-op `git fetch`. This effect seems to reproduce locally in a clean environment (900ms for `ls-remote` + 100ms for `for-each-ref` vs about 1.4s for `fetch`). I don't have any explanation for why this is, but there it is. This isn't a huge change, although the time we're saving does appear to mostly be local CPU time, which is good for us.
- Because we control all writes, we could cache `git for-each-ref` in the future and do fewer disk operations. This doesn't necessarily seem too valuable, though.
- This allows us to tell if a fetch will do anything or not, and make better decisions around clustering (in particular, simplify how observed repository versioning works). With `git fetch`, we can't easily distinguish between "fetch, but nothing changed" and "legitimate fetch".
If a repository updates very regularly we end up doing slightly more work this way (that is, if `ls-remote` always comes back with changes, we do a little extra work), but this is normally very rare.
This might not get non-bare repositories quite right in some cases (i.e., incorrectly detect them as changed when they are unchanged) but we haven't created non-bare repositories for many years.
Test Plan: Ran `bin/repository update --trace --verbose PHABX`, saw sensible construction of local and remote maps and accurate detection of whether a fetch would do anything or not.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12392, T12296
Differential Revision: https://secure.phabricator.com/D17497
Summary: Ref T12270. Builds out a BadgeCache for PhabricatorUser, primarily for Timeline, potentially feed? This should still work if we later let people pick which two, just switch query in BadgeCache.
Test Plan: Give out badges, test timeline for displaying badges from handles and without queries. Revoke a badge, see cache change.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17503
Summary:
Fixes T12406. When importing commits, we automatically add auditors if the message lists "Auditors: username".
If the list of auditors includes the commit author, this edit fails because you can't audit your own commits (previously, you sometimes could and/or we didn't validate).
Instead, just ignore "Auditors: author".
Test Plan:
- Made a commit with "Auditors: epriestley".
- Pushed it.
- Saw the HeraldWorker get stuck with the error in T12406.
- Applied the change; worker now succeeded.
Reviewers: chad
Reviewed By: chad
Subscribers: alexmv
Maniphest Tasks: T12406
Differential Revision: https://secure.phabricator.com/D17507
Summary:
Fixes T12409. Config entries may be marked as "deleted", and `bin/config set --database` doesn't un-delete them, so the edit doesn't do anything.
The "most correct" fix here is to swap to transactions so we run the same code, but just fix this narrowly for now since it's one line of code.
Test Plan:
- Set `maniphest.default-priority` to `123`.
- Deleted `maniphest.default-priority` from the web UI by deleting all the text in the box.
- Before patch: `bin/config set --database maniphest.default-priority 789` had no effect.
- After patch: `bin/config set --database maniphest.default-priority 789` worked.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12409
Differential Revision: https://secure.phabricator.com/D17506
Summary: Extends PHUIListItemView to take an icon, link as an "Action Item" that displays on the right side of the menu link. Does not display on Favorites. This allows for adding edit, external, or other links (documentation?) to any menu item. Right now the secondary link is only visible when the item is selected. This feels right, but if we offer it in other ways, users may always want it visible. We could look at making it onhover.
Test Plan:
Add a bunch of random global and personal dashboards to my menu. Add a menu to Favorites, see no link. Test mobile, link works.
{F4136699}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17505
Summary:
Via HackerOne. When you view a raw file in Differential, we currently generate a permanent file with default permissions. This may be incorrect: default permissions may be broader than the diff's permissions.
The other three methods of downloading/viewing raw files ("Download" in Diffusion and Differential, "View Raw" in Diffusion and Differential) already apply policies correctly and generate temporary files. However, this workflow was missed when other workflows were updated.
Beyond updating the workflow, delete any files we've generated in the past. This wipes the slate clean on any security issues and frees up a little disk space.
Test Plan:
- Ran migration script, saw existing files get purged.
- Did "View Raw File", got a new file.
- Verified that the file was temporary and properly attached to the diff, with "NO ONE" permissions.
- Double-checked that Diffusion already runs policy logic correctly and applies appropriate policies.
- Double-checked that "Download Raw Diff" in Differential already runs policy logic correctly.
- Double-chekced that "Download Raw Diff" in Diffusion already runs policy logic correctly.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17504
Summary:
Fixes T12400. Adds a "Has MFA" filter to People so you can figure out who you need to harass before turning on "require MFA".
When you run this as a non-admin, you don't currently actually hit the exception: the query just doesn't work. I think this is probably okay, but if we add more of these it might be better to make the "this didn't work" more explicit since it could be confusing in some weird edge cases (like, an administrator sending a non-administrator a link which they expect will show the non-administrator some interesting query results, but they actually just get no constraint). The exception is more of a fail-safe in case we make application changes in the future and don't remember this weird special case.
Test Plan:
- As an administrator and non-administrator, used People and Conduit to query MFA, no-MFA, and don't-care-about-MFA. These queries worked for an admin and didn't work for a non-admin.
- Viewed the list as an administrator, saw MFA users annotated.
- Viewed config help, clicked link as an admin, ended up in the right place.
{F4093033}
{F4093034}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12400
Differential Revision: https://secure.phabricator.com/D17500
Summary: Fixes T12398. This adds `withBadgeStatuses` as a query parameter when searching for Awards to show. In most (all?) cases we currently only show active badges.
Test Plan: Assign myself a badge, archive it and verify it does not appear on profile, comment form, or timeline.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12398
Differential Revision: https://secure.phabricator.com/D17499
Summary: Ref T12264. This allows users to install a dashboard they are viewing to their personal home menu or as a global home menu item. Has some basic ability to be extended later for maybe projects.
Test Plan:
Build a dashboard, click "Install Dashboard".
- As user only get personal option
- As HomeApp edit person, see both options
- Try installation as either, with and without label set
- Fake "global" form as user, get error
- Don't set anything, get error
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12264
Differential Revision: https://secure.phabricator.com/D17492
Summary:
Ref T10967. This is an incremental step toward removing "reviewers" back to a dedicated storage table so we can handle changes like T11050.
This adds the storage table, and starts doing double writes to it (so new or updated reviewers write to both the old edge table and the new "reviewers" table).
Then we can do a migration, swap readers over one at a time, and eventually remove the old write and old storage and then implement new features.
This change has no user-facing impact, it just causes us to write new data to two places instead of one.
This is not completely exhaustive: the Herald "Add Reviewers" action is still doing a manual EDGE transaction. I'll clean that up next and do another pass to look for anything else I missed.
This is also a bit copy/pastey for now but the logic around "RESIGN" is a little different in the two cases until T11050. I'll unify it in future changes.
Test Plan:
- Did a no-op edit.
- Did a no-op comment.
- Added reviewers.
- Removed reviewers.
- Accepted and rejected revisions.
After all of these edits, did a `SELECT * FROM differential_reviewer` manually and saw consistent-looking rows in the database.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T10967
Differential Revision: https://secure.phabricator.com/D17495
Summary: Fix tag alignment on project cards when there are multiple tags. Also fixes T12381.
Test Plan: Review a project and people hovercard in sandbox, ensure multiple tags look as expected.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12381
Differential Revision: https://secure.phabricator.com/D17488
Summary: These were once ordered, but I think we switched to being defined in the Engine and never implemented the sorts there. This adds sort ordering to Tasks, Projects, and Repositories.
Test Plan: Review Favorites Menu in local install, see order is now set per the engine. Click Edit Favorites, and re-order. See order sticks.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17490
Summary:
Ref T12270. This just drops the constraint for now, rather than dealing with all the typecasting stuff and putting us in a position which will almost certainly require backward compatibility breaks in the future.
Also renames "badges.*" to "badge.*" for consistency (all other methods are singular: token.*, project.*, differential.revision.*, etc).
Test Plan:
Saw "qualities" now "Not Supported", while other constraints continue to work:
{F3887194}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17487
Summary: Allow people to award and remove badges via conduit, but not from the standard badges form.
Test Plan:
Build a generator and generate awards. Didn't test the revoke yet.
{F3857766}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17482
Summary:
Fixes T12378. Two minor issues here:
- CAN_INTERACT on tasks uses "USER", but should just use the view policy, which may be more permissive ("PUBLIC").
- CAN_INTERACT is currently prevented from being "PUBLIC" by additional safeguards. Define an explicit capability object for the permission which returns `true` from `shouldAllowPublicPolicySetting()`.
Test Plan:
- Viewed an unlocked task as a logged-out user, saw "login to comment" instead of "locked".
- Viewed a locked task as a logged-out user, saw "locked".
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12378
Differential Revision: https://secure.phabricator.com/D17485
Summary: This is overly broad and I missed it in local testing with just a single account. Let's pull just the author in.
Test Plan: Review a commit page that wasn't my own, see other authors commits.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17481
Summary: This should be blue, not grey.
Test Plan: Add a milestone and subproject to a project
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17477
Summary: Fixes T10698. This shows badges under the comment preview if the application uses TransactionCommentView. I suspect not everything does, but will pick the fix up for free when modernized.
Test Plan: Test commenting on a task with and without a user that has a badge. See badge preview.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10698
Differential Revision: https://secure.phabricator.com/D17480
Summary: This currently queries all tasks, make it limit to only open tasks.
Test Plan: Assign myself an open and a resolved task. See only open on profile.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17476
Summary: Fixes T12360. I'll probably make a non-audit commit list for this, maybe, eventually, until then add all the needed audit information.
Test Plan: Review commits in my profile, see data and not a fatal.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12360
Differential Revision: https://secure.phabricator.com/D17475
Summary: This just adds a few more dimensions to the generator.
Test Plan: run `bin/lipsum generate badges`, verify new icons and quality work.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17474
Summary: Probably useful if you use Phrequent.
Test Plan: I did not test this beyond lint/unit.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17473
Summary: Mostly a minor nit-pick, but I hate sending users off the profile and disorient them onto application search. These pages are pretty easy to maintain, I don't expect to need to do more here. I dropped Differential outright. Kept Tasks and Commits. Now you can browse everything about a user on their profile without leaving. Maybe add a link to ApplicationSearch? Not sure it's important.
Test Plan: Review tasks and commits on mine and other user profiles.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17470
Summary: Ref T12270. Adds the date the badge was awarded.
Test Plan: Award a badge, see date on profile badge when card is flipped.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17471
Summary: Fixes T10319. This looks for custom profile image, then falls back to a generated profile image.
Test Plan: Create a new user, log in, and see new profile image. Note this seems to break `bin/lipsum generate user`
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10319
Differential Revision: https://secure.phabricator.com/D17467
Summary: Ref T12337. This just fills out a couple more task relationships.
Test Plan: Viewed the edges in the Conduit console, queried for them.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12337
Differential Revision: https://secure.phabricator.com/D17465
Summary: Ref T10319. This adds a basic means of generating default profile images for users. You can generate them for everyone, a group of users, or force updates. This only generated images and stores them in files. It does not assign them to users.
Test Plan:
`bin/people profileimage --all` to generate all images.
`bin/people profileimage --users chad` to generate a user.
`bin/people profileimage --all --force` to force rebuilding all images.
{F3662810}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10319
Differential Revision: https://secure.phabricator.com/D17464
Summary:
Ref T12337. Ref T5873. This provides a generic "edge.search" method which feels like other "verison 3" `*.search` methods.
The major issues here are:
1. Edges use constants internally, which aren't great for an API.
2. A lot of edges are internal and probably not useful to query.
3. Edges don't have a real "id", so paginating them properly is challenging.
I've solved these things like this:
- Edges must opt-in to being available via Conduit by providing a human-readable key (like "mention" instead of "52"). This solvs (1) and (2).
- I faked a mostly-reasonable behavior for paginating.
Test Plan:
Ran various valid and invalid searches. Paginated a large search. Reviewed UI.
{F3651818}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12337, T5873
Differential Revision: https://secure.phabricator.com/D17462
Summary: Ref T12335. Allows you to lock tasks to keep your precious tokens.
Test Plan:
- Awarded tokens to an unlocked task.
- Locked the task.
- Could no longer award/rescind tokens.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12335
Differential Revision: https://secure.phabricator.com/D17461
Summary: Ref T10319. Adds in database columns for upcoming default generated avatar support.
Test Plan: Ran storage upgrade, log into local site to verify it didn't blow up.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10319
Differential Revision: https://secure.phabricator.com/D17459
Summary: Ref T10319. This swaps the default in the Picture Chooser to allow picking of the custom unique avatar. We're currently going with 100k unique possibilities. The logic roughly hashes a user name and picks an image pack, color, and border. Based on that, we select the first character of their username, or fall back to Psyduck if not [a-z][0-9].
Test Plan:
Set the following usernames from ProfilePicture as a test: chad, epriestley, sally, 007, _cat_, -doggie-.
{F3453979}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10319
Differential Revision: https://secure.phabricator.com/D17430
Summary:
Ref T12313. This puts a UI on revoking credentials after a widespread compromise like Cloudbleed or a local one like copy/pasting a token into public chat.
For now, I'm only providing a revoker for conduit tokens since that's the immediate use case.
Test Plan:
- Revoked in user + type, everything + user, everywhere + type, and everything + everywhere modes.
- Verified that conduit tokens were destroyed in all cases.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12313
Differential Revision: https://secure.phabricator.com/D17458
Summary: Ref T9010. This adds more icons and lets the IconChooser handle more icons more easier.
Test Plan: Test Project Icons, Badges Icons
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T9006, T9010
Differential Revision: https://secure.phabricator.com/D17456
Summary: Fixes T12347. Ref T12314. Validation gets called no matter what, but is only relevant if the form supports subtypes.
Test Plan: Marked/unmarked a Paste form as editable.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12347, T12314
Differential Revision: https://secure.phabricator.com/D17457
Summary: Fixes T10798. Separates these two since they don't need to be combined and it allows for more flexibility / scalability.
Test Plan:
- Add Badge
- Edit Badge
- Add myself as Recipient
- Remove myself
- Go to my profile
- Award Badge from there
- Assign myself a badge, try to re-assign it, see validation error.
Also, validation errors on dialog forms are ugly.
{F3495630}
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T10798, T12270
Differential Revision: https://secure.phabricator.com/D17447
Summary:
This is a consistency change to make this option consistent with `audio-mime-types`, `image-mime-types` and `icon-mime-types`, all of which are locked.
(They're locked because SVG is definitely dangerous, and other types might be dangerous or might become dangerous in the future, although I'm not aware of any actual dangers from video types today.)
Test Plan: Viewed `files.video-mime-types` in Config, saw it was locked.
Reviewers: chad
Reviewed By: chad
Differential Revision: https://secure.phabricator.com/D17454
Summary:
Ref T12335. See that task for discussion. Here are the behavioral changes:
- Statuses can be flagged with `locked`, which means that tasks in that status are locked to further discussion and interaction.
- A new "CAN_INTERACT" permission facilitates this. For most objects, "CAN_INTERACT" is just the same as "CAN_VIEW".
- For tasks, "CAN_INTERACT" is everyone if the status is a normal status, and no one if the status is a locked status.
- If a user doesn't have "Interact" permission:
- They can not submit the comment form.
- The comment form is replaced with text indicating "This thing is locked.".
- The "Edit" workflow prompts them.
This is a mixture of advisory and hard policy checks but sholuld represent a reasonable starting point.
Test Plan: Created a new "Locked" status, locked a task. Couldn't comment, saw lock warning, saw lock prompt on edit. Unlocked a task.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12335
Differential Revision: https://secure.phabricator.com/D17453
Summary:
Ref T12335. Fixes T11207. Edit-like interactions which are not performed via "Edit <object>" are a bit of a grey area, policy-wise.
For example, you can correctly do these things to an object you can't edit:
- Comment on it.
- Award tokens.
- Subscribe or unsubscribe.
- Subscribe other users by mentioning them.
- Perform review.
- Perform audit.
- (Maybe some other stuff.)
These behaviors are all desirable and correct. But, particularly now that we offer stacked actions, you can do a bunch of other stuff which you shouldn't really be able to, like changing the status and priority of tasks you can't edit, as long as you submit the change via the comment form.
(Before the advent of stacked actions there were fewer things you could do via the comment form, and more of them were very "grey area", especially since "Change Subscribers" was just "Add Subscribers", which you can do via mentions.)
This isn't too much of a problem in practice because we won't //show// you those actions if the edit form you'd end up on doesn't have those fields. So on intalls like ours where we've created simple + advanced flows, users who shouldn't be changing task priorities generally don't see an option to do so, even though they technically could if they mucked with the HTML.
Change this behavior to be more strict: unless an action explicitly says that it doesn't need edit permission (comment, review, audit) don't show it to users who don't have edit permission and don't let them take the action.
Test Plan:
- As a user who could not edit a task, tried to change status via comment form; received policy exception.
- As a user who could not edit a task, viewed a comment form: no actions available (just "comment").
- As a user who could not edit a revision, viewed a revision form: only "review" actions available (accept, resign, etc).
- Viewed a commit form but these are kind of moot because there's no separate edit permission.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12335, T11207
Differential Revision: https://secure.phabricator.com/D17452
Summary: Ref T12270. We don't really need these, timeline does it's own thing, badges is now a profile page, and hovercards have been removed.
Test Plan: Visit timeline, still see badges, visit my profile page, bask in the warmth of fake awards.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17448
Summary: Ref T12270. Adds the name of the badge to the subject, fixes the double description.
Test Plan: Edit lots of badges with and without descriptions, see good emails.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12270
Differential Revision: https://secure.phabricator.com/D17449
Summary: Doesn't seem popular, will rethink dashboard editing again in the future at some point.
Test Plan: Review a dashboard, edit, install.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Differential Revision: https://secure.phabricator.com/D17450
Summary:
Ref T12314. Ref T6064. Ref T11580. If an install defines several different task create forms (like "Create Plant" and "Create Animal"), allow any of them to be created directly onto a workboard column.
This is just a general consistency improvement that makes Custom Forms and Workboards work together a bit better. We might do something fancier eventually for T6064 (which wants fewer clicks) and/or T11580 (which wants per-workboard control over forms or defaults).
Test Plan:
- Created several different types of tasks directly onto a workboard.
- Faked just one create form, saw the UI unchanged (except that it respects any renaming).
{F3492928}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314, T11580, T6064
Differential Revision: https://secure.phabricator.com/D17446
Summary:
Ref T12314. When we pick an "Edit" form for a subtyped object, only consider forms with the same subtype.
For example, editing an "Animal" uses the forms with subtype "animal" which are marked as edit forms.
This also makes "Create Subtask" carry the parent task's type.
Test Plan:
- Edited an Animal, got an animal edit form.
- Edited a normal task, got a normal task form.
- Edited a paste, got the normal workflow.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17445
Summary:
Ref T12314. Allow tasks to be queried by subtype using a typeahead.
Open to a better default icon. I'll probably let you configure them later.
Just hide this constraint if there's only one subtype.
Test Plan:
- Searched for subtypes.
- Verified that the control hides if there is only one subtype.
{F3492293}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17444
Summary:
Ref T12314. If you set a form to have the "plant" subtype, then create a task with it, save "plant" as the task subtype.
For Conduit, the default subtype is used by default, but a new "subtype" transaction is exposed. You can apply this transaction at create time to create an object of a certain subtype, or at any later time to change the subtype of an object.
This still doesn't do anything particularly useful or interesting.
Test Plan:
- Created a non-subtyped object (a Paste).
- Created "task" and "plant" tasks via different forms.
- Created "default" and "plant" tasks via Conduit.
- Changed the subtype of a task via Conduit.
- Tried to set a bad subtype.
{F3492061}
{F3492066}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17443
Summary:
Ref T12314. This adds a "Change Form Subtype" workflow to the EditEngine form configuration screen, for forms that edit/create objects which support subtyping (for now, only tasks).
For example, this allows you to switch a form from being a "task" form to a "plant" or "animal" form.
Doing this doesn't yet do anything useful or interesting. I'm also not showing it in the UI yet since I'm not sure what we should make that look like (presumably, we should just echo whatever UI we end up with on tasks).
Test Plan:
- Changed the subtype of a task form.
- Verified that the "Change Subtype" action doesn't appear on other forms (for example, those for Pastes).
{F3491374}
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17442
Summary: Ref T12314. Provides a field on tasks for storing subtypes. Does nothing interesting yet.
Test Plan:
- Ran storage upgrade.
- Created some tasks.
- Looked in the database.
- Used Conduit to query some tasks.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17441
Summary:
Ref T12314. Builds toward letting you define "animal" and "plant" tasks.
This just adds some configuration. I'll probably add some more quality-of-life options (like "icon") later but these are the only bits I'm sure I'll need.
Test Plan:
- Configured sensible subtypes.
- Tried to configure bad subtypes: bad key, missing "default", duplicate keys. Got sensible error messages.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17440
Summary:
Ref T12314. This adds storage so EditEngine forms can later be marked as edit fields for particular types of objects (like an "animal edit form" vs a "plant edit form").
We'll take you to the right edit form when you click "Edit" by selecting among forms with the same subtype as the task.
This doesn't do anything very interesting on its own.
Test Plan:
- Ran `bin/storage upgrade`.
- Verified database got the field with proper values.
- Created a new form, checked the database.
- Ran unit tests.
Reviewers: chad
Reviewed By: chad
Maniphest Tasks: T12314
Differential Revision: https://secure.phabricator.com/D17439
Summary: Ref T12298. `phd launch` was missed in D17390 and thus broken by D17389.
Test Plan: Launched a daemon with great success.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T12298
Differential Revision: https://secure.phabricator.com/D17429
Summary: Fixes T12338. Resolves an issue where long pastes would be truncated before getting a line count, resulting in an inaccurate line count being returned.
Test Plan: Made a large paste, verified that it displayed the correct number of lines.
Reviewers: #blessed_reviewers, epriestley
Reviewed By: #blessed_reviewers, epriestley
Subscribers: Korvin
Maniphest Tasks: T12338
Differential Revision: https://secure.phabricator.com/D17438
Summary: Fixes T12330. Minor UI nit, since we use "disabled" to usually mean "no permission". Makes these links always normal looking.
Test Plan: Review a new project in sandbox.
Reviewers: epriestley
Reviewed By: epriestley
Subscribers: Korvin
Maniphest Tasks: T12330
Differential Revision: https://secure.phabricator.com/D17436
